xref: /openbmc/linux/drivers/scsi/qlogicfas.c (revision a2cce7a9)
1 /*
2  * Qlogic FAS408 ISA card driver
3  *
4  * Copyright 1994, Tom Zerucha.
5  * tz@execpc.com
6  *
7  * Redistributable under terms of the GNU General Public License
8  *
9  * For the avoidance of doubt the "preferred form" of this code is one which
10  * is in an open non patent encumbered format. Where cryptographic key signing
11  * forms part of the process of creating an executable the information
12  * including keys needed to generate an equivalently functional executable
13  * are deemed to be part of the source code.
14  *
15  * Check qlogicfas408.c for more credits and info.
16  */
17 
18 #include <linux/module.h>
19 #include <linux/blkdev.h>		/* to get disk capacity */
20 #include <linux/kernel.h>
21 #include <linux/string.h>
22 #include <linux/init.h>
23 #include <linux/interrupt.h>
24 #include <linux/ioport.h>
25 #include <linux/proc_fs.h>
26 #include <linux/unistd.h>
27 #include <linux/spinlock.h>
28 #include <linux/stat.h>
29 
30 #include <asm/io.h>
31 #include <asm/irq.h>
32 #include <asm/dma.h>
33 
34 #include "scsi.h"
35 #include <scsi/scsi_host.h>
36 #include "qlogicfas408.h"
37 
38 /* Set the following to 2 to use normal interrupt (active high/totempole-
39  * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open
40  * drain
41  */
42 #define INT_TYPE	2
43 
44 static char qlogicfas_name[] = "qlogicfas";
45 
46 /*
47  *	Look for qlogic card and init if found
48  */
49 
50 static struct Scsi_Host *__qlogicfas_detect(struct scsi_host_template *host,
51 								int qbase,
52 								int qlirq)
53 {
54 	int qltyp;		/* type of chip */
55 	int qinitid;
56 	struct Scsi_Host *hreg;	/* registered host structure */
57 	struct qlogicfas408_priv *priv;
58 
59 	/*	Qlogic Cards only exist at 0x230 or 0x330 (the chip itself
60 	 *	decodes the address - I check 230 first since MIDI cards are
61 	 *	typically at 0x330
62 	 *
63 	 *	Theoretically, two Qlogic cards can coexist in the same system.
64 	 *	This should work by simply using this as a loadable module for
65 	 *	the second card, but I haven't tested this.
66 	 */
67 
68 	if (!qbase || qlirq == -1)
69 		goto err;
70 
71 	if (!request_region(qbase, 0x10, qlogicfas_name)) {
72 		printk(KERN_INFO "%s: address %#x is busy\n", qlogicfas_name,
73 							      qbase);
74 		goto err;
75 	}
76 
77 	if (!qlogicfas408_detect(qbase, INT_TYPE)) {
78 		printk(KERN_WARNING "%s: probe failed for %#x\n",
79 								qlogicfas_name,
80 								qbase);
81 		goto err_release_mem;
82 	}
83 
84 	printk(KERN_INFO "%s: Using preset base address of %03x,"
85 			 " IRQ %d\n", qlogicfas_name, qbase, qlirq);
86 
87 	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
88 	qinitid = host->this_id;
89 	if (qinitid < 0)
90 		qinitid = 7;	/* if no ID, use 7 */
91 
92 	qlogicfas408_setup(qbase, qinitid, INT_TYPE);
93 
94 	hreg = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
95 	if (!hreg)
96 		goto err_release_mem;
97 	priv = get_priv_by_host(hreg);
98 	hreg->io_port = qbase;
99 	hreg->n_io_port = 16;
100 	hreg->dma_channel = -1;
101 	if (qlirq != -1)
102 		hreg->irq = qlirq;
103 	priv->qbase = qbase;
104 	priv->qlirq = qlirq;
105 	priv->qinitid = qinitid;
106 	priv->shost = hreg;
107 	priv->int_type = INT_TYPE;
108 
109 	sprintf(priv->qinfo,
110 		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
111 		qltyp, qbase, qlirq, QL_TURBO_PDMA);
112 	host->name = qlogicfas_name;
113 
114 	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogicfas_name, hreg))
115 		goto free_scsi_host;
116 
117 	if (scsi_add_host(hreg, NULL))
118 		goto free_interrupt;
119 
120 	scsi_scan_host(hreg);
121 
122 	return hreg;
123 
124 free_interrupt:
125 	free_irq(qlirq, hreg);
126 
127 free_scsi_host:
128 	scsi_host_put(hreg);
129 
130 err_release_mem:
131 	release_region(qbase, 0x10);
132 err:
133 	return NULL;
134 }
135 
136 #define MAX_QLOGICFAS	8
137 static struct qlogicfas408_priv *cards;
138 static int iobase[MAX_QLOGICFAS];
139 static int irq[MAX_QLOGICFAS] = { [0 ... MAX_QLOGICFAS-1] = -1 };
140 module_param_array(iobase, int, NULL, 0);
141 module_param_array(irq, int, NULL, 0);
142 MODULE_PARM_DESC(iobase, "I/O address");
143 MODULE_PARM_DESC(irq, "IRQ");
144 
145 static int qlogicfas_detect(struct scsi_host_template *sht)
146 {
147 	struct Scsi_Host *shost;
148 	struct qlogicfas408_priv *priv;
149 	int num;
150 
151 	for (num = 0; num < MAX_QLOGICFAS; num++) {
152 		shost = __qlogicfas_detect(sht, iobase[num], irq[num]);
153 		if (shost == NULL) {
154 			/* no more devices */
155 			break;
156 		}
157 		priv = get_priv_by_host(shost);
158 		priv->next = cards;
159 		cards = priv;
160 	}
161 
162 	return num;
163 }
164 
165 static int qlogicfas_release(struct Scsi_Host *shost)
166 {
167 	struct qlogicfas408_priv *priv = get_priv_by_host(shost);
168 
169 	scsi_remove_host(shost);
170 	if (shost->irq) {
171 		qlogicfas408_disable_ints(priv);
172 		free_irq(shost->irq, shost);
173 	}
174 	if (shost->io_port && shost->n_io_port)
175 		release_region(shost->io_port, shost->n_io_port);
176 	scsi_host_put(shost);
177 
178 	return 0;
179 }
180 
181 /*
182  *	The driver template is also needed for PCMCIA
183  */
184 static struct scsi_host_template qlogicfas_driver_template = {
185 	.module			= THIS_MODULE,
186 	.name			= qlogicfas_name,
187 	.proc_name		= qlogicfas_name,
188 	.info			= qlogicfas408_info,
189 	.queuecommand		= qlogicfas408_queuecommand,
190 	.eh_abort_handler	= qlogicfas408_abort,
191 	.eh_bus_reset_handler	= qlogicfas408_bus_reset,
192 	.bios_param		= qlogicfas408_biosparam,
193 	.can_queue		= 1,
194 	.this_id		= -1,
195 	.sg_tablesize		= SG_ALL,
196 	.use_clustering		= DISABLE_CLUSTERING,
197 };
198 
199 static __init int qlogicfas_init(void)
200 {
201 	if (!qlogicfas_detect(&qlogicfas_driver_template)) {
202 		/* no cards found */
203 		printk(KERN_INFO "%s: no cards were found, please specify "
204 				 "I/O address and IRQ using iobase= and irq= "
205 				 "options", qlogicfas_name);
206 		return -ENODEV;
207 	}
208 
209 	return 0;
210 }
211 
212 static __exit void qlogicfas_exit(void)
213 {
214 	struct qlogicfas408_priv *priv;
215 
216 	for (priv = cards; priv != NULL; priv = priv->next)
217 		qlogicfas_release(priv->shost);
218 }
219 
220 MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
221 MODULE_DESCRIPTION("Driver for the Qlogic FAS408 based ISA card");
222 MODULE_LICENSE("GPL");
223 module_init(qlogicfas_init);
224 module_exit(qlogicfas_exit);
225 
226