1 /* 2 * Qlogic FAS408 ISA card driver 3 * 4 * Copyright 1994, Tom Zerucha. 5 * tz@execpc.com 6 * 7 * Redistributable under terms of the GNU General Public License 8 * 9 * For the avoidance of doubt the "preferred form" of this code is one which 10 * is in an open non patent encumbered format. Where cryptographic key signing 11 * forms part of the process of creating an executable the information 12 * including keys needed to generate an equivalently functional executable 13 * are deemed to be part of the source code. 14 * 15 * Check qlogicfas408.c for more credits and info. 16 */ 17 18 #include <linux/module.h> 19 #include <linux/blkdev.h> /* to get disk capacity */ 20 #include <linux/kernel.h> 21 #include <linux/string.h> 22 #include <linux/init.h> 23 #include <linux/interrupt.h> 24 #include <linux/ioport.h> 25 #include <linux/proc_fs.h> 26 #include <linux/unistd.h> 27 #include <linux/spinlock.h> 28 #include <linux/stat.h> 29 30 #include <asm/io.h> 31 #include <asm/irq.h> 32 #include <asm/dma.h> 33 34 #include "scsi.h" 35 #include <scsi/scsi_host.h> 36 #include "qlogicfas408.h" 37 38 /* Set the following to 2 to use normal interrupt (active high/totempole- 39 * tristate), otherwise use 0 (REQUIRED FOR PCMCIA) for active low, open 40 * drain 41 */ 42 #define INT_TYPE 2 43 44 static char qlogicfas_name[] = "qlogicfas"; 45 46 /* 47 * Look for qlogic card and init if found 48 */ 49 50 static struct Scsi_Host *__qlogicfas_detect(Scsi_Host_Template *host, 51 int qbase, 52 int qlirq) 53 { 54 int qltyp; /* type of chip */ 55 int qinitid; 56 struct Scsi_Host *hreg; /* registered host structure */ 57 struct qlogicfas408_priv *priv; 58 59 /* Qlogic Cards only exist at 0x230 or 0x330 (the chip itself 60 * decodes the address - I check 230 first since MIDI cards are 61 * typically at 0x330 62 * 63 * Theoretically, two Qlogic cards can coexist in the same system. 64 * This should work by simply using this as a loadable module for 65 * the second card, but I haven't tested this. 66 */ 67 68 if (!qbase || qlirq == -1) 69 goto err; 70 71 if (!request_region(qbase, 0x10, qlogicfas_name)) { 72 printk(KERN_INFO "%s: address %#x is busy\n", qlogicfas_name, 73 qbase); 74 goto err; 75 } 76 77 if (!qlogicfas408_detect(qbase, INT_TYPE)) { 78 printk(KERN_WARNING "%s: probe failed for %#x\n", 79 qlogicfas_name, 80 qbase); 81 goto err_release_mem; 82 } 83 84 printk(KERN_INFO "%s: Using preset base address of %03x," 85 " IRQ %d\n", qlogicfas_name, qbase, qlirq); 86 87 qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE); 88 qinitid = host->this_id; 89 if (qinitid < 0) 90 qinitid = 7; /* if no ID, use 7 */ 91 92 qlogicfas408_setup(qbase, qinitid, INT_TYPE); 93 94 hreg = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv)); 95 if (!hreg) 96 goto err_release_mem; 97 priv = get_priv_by_host(hreg); 98 hreg->io_port = qbase; 99 hreg->n_io_port = 16; 100 hreg->dma_channel = -1; 101 if (qlirq != -1) 102 hreg->irq = qlirq; 103 priv->qbase = qbase; 104 priv->qlirq = qlirq; 105 priv->qinitid = qinitid; 106 priv->shost = hreg; 107 priv->int_type = INT_TYPE; 108 109 sprintf(priv->qinfo, 110 "Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d", 111 qltyp, qbase, qlirq, QL_TURBO_PDMA); 112 host->name = qlogicfas_name; 113 114 if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogicfas_name, hreg)) 115 goto free_scsi_host; 116 117 if (scsi_add_host(hreg, NULL)) 118 goto free_interrupt; 119 120 scsi_scan_host(hreg); 121 122 return hreg; 123 124 free_interrupt: 125 free_irq(qlirq, hreg); 126 127 free_scsi_host: 128 scsi_host_put(hreg); 129 130 err_release_mem: 131 release_region(qbase, 0x10); 132 err: 133 return NULL; 134 } 135 136 #define MAX_QLOGICFAS 8 137 static struct qlogicfas408_priv *cards; 138 static int iobase[MAX_QLOGICFAS]; 139 static int irq[MAX_QLOGICFAS] = { [0 ... MAX_QLOGICFAS-1] = -1 }; 140 module_param_array(iobase, int, NULL, 0); 141 module_param_array(irq, int, NULL, 0); 142 MODULE_PARM_DESC(iobase, "I/O address"); 143 MODULE_PARM_DESC(irq, "IRQ"); 144 145 static int __devinit qlogicfas_detect(Scsi_Host_Template *sht) 146 { 147 struct Scsi_Host *shost; 148 struct qlogicfas408_priv *priv; 149 int num; 150 151 for (num = 0; num < MAX_QLOGICFAS; num++) { 152 shost = __qlogicfas_detect(sht, iobase[num], irq[num]); 153 if (shost == NULL) { 154 /* no more devices */ 155 break; 156 } 157 priv = get_priv_by_host(shost); 158 priv->next = cards; 159 cards = priv; 160 } 161 162 return num; 163 } 164 165 static int qlogicfas_release(struct Scsi_Host *shost) 166 { 167 struct qlogicfas408_priv *priv = get_priv_by_host(shost); 168 169 if (shost->irq) { 170 qlogicfas408_disable_ints(priv); 171 free_irq(shost->irq, shost); 172 } 173 if (shost->dma_channel != 0xff) 174 free_dma(shost->dma_channel); 175 if (shost->io_port && shost->n_io_port) 176 release_region(shost->io_port, shost->n_io_port); 177 scsi_remove_host(shost); 178 scsi_host_put(shost); 179 180 return 0; 181 } 182 183 /* 184 * The driver template is also needed for PCMCIA 185 */ 186 static Scsi_Host_Template qlogicfas_driver_template = { 187 .module = THIS_MODULE, 188 .name = qlogicfas_name, 189 .proc_name = qlogicfas_name, 190 .info = qlogicfas408_info, 191 .queuecommand = qlogicfas408_queuecommand, 192 .eh_abort_handler = qlogicfas408_abort, 193 .eh_bus_reset_handler = qlogicfas408_bus_reset, 194 .eh_device_reset_handler= qlogicfas408_device_reset, 195 .eh_host_reset_handler = qlogicfas408_host_reset, 196 .bios_param = qlogicfas408_biosparam, 197 .can_queue = 1, 198 .this_id = -1, 199 .sg_tablesize = SG_ALL, 200 .cmd_per_lun = 1, 201 .use_clustering = DISABLE_CLUSTERING, 202 }; 203 204 static __init int qlogicfas_init(void) 205 { 206 if (!qlogicfas_detect(&qlogicfas_driver_template)) { 207 /* no cards found */ 208 printk(KERN_INFO "%s: no cards were found, please specify " 209 "I/O address and IRQ using iobase= and irq= " 210 "options", qlogicfas_name); 211 return -ENODEV; 212 } 213 214 return 0; 215 } 216 217 static __exit void qlogicfas_exit(void) 218 { 219 struct qlogicfas408_priv *priv; 220 221 for (priv = cards; priv != NULL; priv = priv->next) 222 qlogicfas_release(priv->shost); 223 } 224 225 MODULE_AUTHOR("Tom Zerucha, Michael Griffith"); 226 MODULE_DESCRIPTION("Driver for the Qlogic FAS408 based ISA card"); 227 MODULE_LICENSE("GPL"); 228 module_init(qlogicfas_init); 229 module_exit(qlogicfas_exit); 230 231