1 /* 2 * QLogic Fibre Channel HBA Driver 3 * Copyright (c) 2003-2014 QLogic Corporation 4 * 5 * See LICENSE.qla2xxx for copyright and licensing details. 6 */ 7 #include "qla_def.h" 8 9 #include <linux/delay.h> 10 #include <linux/slab.h> 11 #include <linux/vmalloc.h> 12 #include <linux/uaccess.h> 13 14 /* 15 * NVRAM support routines 16 */ 17 18 /** 19 * qla2x00_lock_nvram_access() - 20 * @ha: HA context 21 */ 22 static void 23 qla2x00_lock_nvram_access(struct qla_hw_data *ha) 24 { 25 uint16_t data; 26 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 27 28 if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) { 29 data = RD_REG_WORD(®->nvram); 30 while (data & NVR_BUSY) { 31 udelay(100); 32 data = RD_REG_WORD(®->nvram); 33 } 34 35 /* Lock resource */ 36 WRT_REG_WORD(®->u.isp2300.host_semaphore, 0x1); 37 RD_REG_WORD(®->u.isp2300.host_semaphore); 38 udelay(5); 39 data = RD_REG_WORD(®->u.isp2300.host_semaphore); 40 while ((data & BIT_0) == 0) { 41 /* Lock failed */ 42 udelay(100); 43 WRT_REG_WORD(®->u.isp2300.host_semaphore, 0x1); 44 RD_REG_WORD(®->u.isp2300.host_semaphore); 45 udelay(5); 46 data = RD_REG_WORD(®->u.isp2300.host_semaphore); 47 } 48 } 49 } 50 51 /** 52 * qla2x00_unlock_nvram_access() - 53 * @ha: HA context 54 */ 55 static void 56 qla2x00_unlock_nvram_access(struct qla_hw_data *ha) 57 { 58 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 59 60 if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) { 61 WRT_REG_WORD(®->u.isp2300.host_semaphore, 0); 62 RD_REG_WORD(®->u.isp2300.host_semaphore); 63 } 64 } 65 66 /** 67 * qla2x00_nv_write() - Prepare for NVRAM read/write operation. 68 * @ha: HA context 69 * @data: Serial interface selector 70 */ 71 static void 72 qla2x00_nv_write(struct qla_hw_data *ha, uint16_t data) 73 { 74 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 75 76 WRT_REG_WORD(®->nvram, data | NVR_SELECT | NVR_WRT_ENABLE); 77 RD_REG_WORD(®->nvram); /* PCI Posting. */ 78 NVRAM_DELAY(); 79 WRT_REG_WORD(®->nvram, data | NVR_SELECT | NVR_CLOCK | 80 NVR_WRT_ENABLE); 81 RD_REG_WORD(®->nvram); /* PCI Posting. */ 82 NVRAM_DELAY(); 83 WRT_REG_WORD(®->nvram, data | NVR_SELECT | NVR_WRT_ENABLE); 84 RD_REG_WORD(®->nvram); /* PCI Posting. */ 85 NVRAM_DELAY(); 86 } 87 88 /** 89 * qla2x00_nvram_request() - Sends read command to NVRAM and gets data from 90 * NVRAM. 91 * @ha: HA context 92 * @nv_cmd: NVRAM command 93 * 94 * Bit definitions for NVRAM command: 95 * 96 * Bit 26 = start bit 97 * Bit 25, 24 = opcode 98 * Bit 23-16 = address 99 * Bit 15-0 = write data 100 * 101 * Returns the word read from nvram @addr. 102 */ 103 static uint16_t 104 qla2x00_nvram_request(struct qla_hw_data *ha, uint32_t nv_cmd) 105 { 106 uint8_t cnt; 107 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 108 uint16_t data = 0; 109 uint16_t reg_data; 110 111 /* Send command to NVRAM. */ 112 nv_cmd <<= 5; 113 for (cnt = 0; cnt < 11; cnt++) { 114 if (nv_cmd & BIT_31) 115 qla2x00_nv_write(ha, NVR_DATA_OUT); 116 else 117 qla2x00_nv_write(ha, 0); 118 nv_cmd <<= 1; 119 } 120 121 /* Read data from NVRAM. */ 122 for (cnt = 0; cnt < 16; cnt++) { 123 WRT_REG_WORD(®->nvram, NVR_SELECT | NVR_CLOCK); 124 RD_REG_WORD(®->nvram); /* PCI Posting. */ 125 NVRAM_DELAY(); 126 data <<= 1; 127 reg_data = RD_REG_WORD(®->nvram); 128 if (reg_data & NVR_DATA_IN) 129 data |= BIT_0; 130 WRT_REG_WORD(®->nvram, NVR_SELECT); 131 RD_REG_WORD(®->nvram); /* PCI Posting. */ 132 NVRAM_DELAY(); 133 } 134 135 /* Deselect chip. */ 136 WRT_REG_WORD(®->nvram, NVR_DESELECT); 137 RD_REG_WORD(®->nvram); /* PCI Posting. */ 138 NVRAM_DELAY(); 139 140 return data; 141 } 142 143 144 /** 145 * qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the 146 * request routine to get the word from NVRAM. 147 * @ha: HA context 148 * @addr: Address in NVRAM to read 149 * 150 * Returns the word read from nvram @addr. 151 */ 152 static uint16_t 153 qla2x00_get_nvram_word(struct qla_hw_data *ha, uint32_t addr) 154 { 155 uint16_t data; 156 uint32_t nv_cmd; 157 158 nv_cmd = addr << 16; 159 nv_cmd |= NV_READ_OP; 160 data = qla2x00_nvram_request(ha, nv_cmd); 161 162 return (data); 163 } 164 165 /** 166 * qla2x00_nv_deselect() - Deselect NVRAM operations. 167 * @ha: HA context 168 */ 169 static void 170 qla2x00_nv_deselect(struct qla_hw_data *ha) 171 { 172 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 173 174 WRT_REG_WORD(®->nvram, NVR_DESELECT); 175 RD_REG_WORD(®->nvram); /* PCI Posting. */ 176 NVRAM_DELAY(); 177 } 178 179 /** 180 * qla2x00_write_nvram_word() - Write NVRAM data. 181 * @ha: HA context 182 * @addr: Address in NVRAM to write 183 * @data: word to program 184 */ 185 static void 186 qla2x00_write_nvram_word(struct qla_hw_data *ha, uint32_t addr, uint16_t data) 187 { 188 int count; 189 uint16_t word; 190 uint32_t nv_cmd, wait_cnt; 191 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 192 scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); 193 194 qla2x00_nv_write(ha, NVR_DATA_OUT); 195 qla2x00_nv_write(ha, 0); 196 qla2x00_nv_write(ha, 0); 197 198 for (word = 0; word < 8; word++) 199 qla2x00_nv_write(ha, NVR_DATA_OUT); 200 201 qla2x00_nv_deselect(ha); 202 203 /* Write data */ 204 nv_cmd = (addr << 16) | NV_WRITE_OP; 205 nv_cmd |= data; 206 nv_cmd <<= 5; 207 for (count = 0; count < 27; count++) { 208 if (nv_cmd & BIT_31) 209 qla2x00_nv_write(ha, NVR_DATA_OUT); 210 else 211 qla2x00_nv_write(ha, 0); 212 213 nv_cmd <<= 1; 214 } 215 216 qla2x00_nv_deselect(ha); 217 218 /* Wait for NVRAM to become ready */ 219 WRT_REG_WORD(®->nvram, NVR_SELECT); 220 RD_REG_WORD(®->nvram); /* PCI Posting. */ 221 wait_cnt = NVR_WAIT_CNT; 222 do { 223 if (!--wait_cnt) { 224 ql_dbg(ql_dbg_user, vha, 0x708d, 225 "NVRAM didn't go ready...\n"); 226 break; 227 } 228 NVRAM_DELAY(); 229 word = RD_REG_WORD(®->nvram); 230 } while ((word & NVR_DATA_IN) == 0); 231 232 qla2x00_nv_deselect(ha); 233 234 /* Disable writes */ 235 qla2x00_nv_write(ha, NVR_DATA_OUT); 236 for (count = 0; count < 10; count++) 237 qla2x00_nv_write(ha, 0); 238 239 qla2x00_nv_deselect(ha); 240 } 241 242 static int 243 qla2x00_write_nvram_word_tmo(struct qla_hw_data *ha, uint32_t addr, 244 uint16_t data, uint32_t tmo) 245 { 246 int ret, count; 247 uint16_t word; 248 uint32_t nv_cmd; 249 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 250 251 ret = QLA_SUCCESS; 252 253 qla2x00_nv_write(ha, NVR_DATA_OUT); 254 qla2x00_nv_write(ha, 0); 255 qla2x00_nv_write(ha, 0); 256 257 for (word = 0; word < 8; word++) 258 qla2x00_nv_write(ha, NVR_DATA_OUT); 259 260 qla2x00_nv_deselect(ha); 261 262 /* Write data */ 263 nv_cmd = (addr << 16) | NV_WRITE_OP; 264 nv_cmd |= data; 265 nv_cmd <<= 5; 266 for (count = 0; count < 27; count++) { 267 if (nv_cmd & BIT_31) 268 qla2x00_nv_write(ha, NVR_DATA_OUT); 269 else 270 qla2x00_nv_write(ha, 0); 271 272 nv_cmd <<= 1; 273 } 274 275 qla2x00_nv_deselect(ha); 276 277 /* Wait for NVRAM to become ready */ 278 WRT_REG_WORD(®->nvram, NVR_SELECT); 279 RD_REG_WORD(®->nvram); /* PCI Posting. */ 280 do { 281 NVRAM_DELAY(); 282 word = RD_REG_WORD(®->nvram); 283 if (!--tmo) { 284 ret = QLA_FUNCTION_FAILED; 285 break; 286 } 287 } while ((word & NVR_DATA_IN) == 0); 288 289 qla2x00_nv_deselect(ha); 290 291 /* Disable writes */ 292 qla2x00_nv_write(ha, NVR_DATA_OUT); 293 for (count = 0; count < 10; count++) 294 qla2x00_nv_write(ha, 0); 295 296 qla2x00_nv_deselect(ha); 297 298 return ret; 299 } 300 301 /** 302 * qla2x00_clear_nvram_protection() - 303 * @ha: HA context 304 */ 305 static int 306 qla2x00_clear_nvram_protection(struct qla_hw_data *ha) 307 { 308 int ret, stat; 309 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 310 uint32_t word, wait_cnt; 311 uint16_t wprot, wprot_old; 312 scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); 313 314 /* Clear NVRAM write protection. */ 315 ret = QLA_FUNCTION_FAILED; 316 317 wprot_old = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base)); 318 stat = qla2x00_write_nvram_word_tmo(ha, ha->nvram_base, 319 cpu_to_le16(0x1234), 100000); 320 wprot = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base)); 321 if (stat != QLA_SUCCESS || wprot != 0x1234) { 322 /* Write enable. */ 323 qla2x00_nv_write(ha, NVR_DATA_OUT); 324 qla2x00_nv_write(ha, 0); 325 qla2x00_nv_write(ha, 0); 326 for (word = 0; word < 8; word++) 327 qla2x00_nv_write(ha, NVR_DATA_OUT); 328 329 qla2x00_nv_deselect(ha); 330 331 /* Enable protection register. */ 332 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT); 333 qla2x00_nv_write(ha, NVR_PR_ENABLE); 334 qla2x00_nv_write(ha, NVR_PR_ENABLE); 335 for (word = 0; word < 8; word++) 336 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE); 337 338 qla2x00_nv_deselect(ha); 339 340 /* Clear protection register (ffff is cleared). */ 341 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT); 342 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT); 343 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT); 344 for (word = 0; word < 8; word++) 345 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE); 346 347 qla2x00_nv_deselect(ha); 348 349 /* Wait for NVRAM to become ready. */ 350 WRT_REG_WORD(®->nvram, NVR_SELECT); 351 RD_REG_WORD(®->nvram); /* PCI Posting. */ 352 wait_cnt = NVR_WAIT_CNT; 353 do { 354 if (!--wait_cnt) { 355 ql_dbg(ql_dbg_user, vha, 0x708e, 356 "NVRAM didn't go ready...\n"); 357 break; 358 } 359 NVRAM_DELAY(); 360 word = RD_REG_WORD(®->nvram); 361 } while ((word & NVR_DATA_IN) == 0); 362 363 if (wait_cnt) 364 ret = QLA_SUCCESS; 365 } else 366 qla2x00_write_nvram_word(ha, ha->nvram_base, wprot_old); 367 368 return ret; 369 } 370 371 static void 372 qla2x00_set_nvram_protection(struct qla_hw_data *ha, int stat) 373 { 374 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 375 uint32_t word, wait_cnt; 376 scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); 377 378 if (stat != QLA_SUCCESS) 379 return; 380 381 /* Set NVRAM write protection. */ 382 /* Write enable. */ 383 qla2x00_nv_write(ha, NVR_DATA_OUT); 384 qla2x00_nv_write(ha, 0); 385 qla2x00_nv_write(ha, 0); 386 for (word = 0; word < 8; word++) 387 qla2x00_nv_write(ha, NVR_DATA_OUT); 388 389 qla2x00_nv_deselect(ha); 390 391 /* Enable protection register. */ 392 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT); 393 qla2x00_nv_write(ha, NVR_PR_ENABLE); 394 qla2x00_nv_write(ha, NVR_PR_ENABLE); 395 for (word = 0; word < 8; word++) 396 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE); 397 398 qla2x00_nv_deselect(ha); 399 400 /* Enable protection register. */ 401 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT); 402 qla2x00_nv_write(ha, NVR_PR_ENABLE); 403 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT); 404 for (word = 0; word < 8; word++) 405 qla2x00_nv_write(ha, NVR_PR_ENABLE); 406 407 qla2x00_nv_deselect(ha); 408 409 /* Wait for NVRAM to become ready. */ 410 WRT_REG_WORD(®->nvram, NVR_SELECT); 411 RD_REG_WORD(®->nvram); /* PCI Posting. */ 412 wait_cnt = NVR_WAIT_CNT; 413 do { 414 if (!--wait_cnt) { 415 ql_dbg(ql_dbg_user, vha, 0x708f, 416 "NVRAM didn't go ready...\n"); 417 break; 418 } 419 NVRAM_DELAY(); 420 word = RD_REG_WORD(®->nvram); 421 } while ((word & NVR_DATA_IN) == 0); 422 } 423 424 425 /*****************************************************************************/ 426 /* Flash Manipulation Routines */ 427 /*****************************************************************************/ 428 429 static inline uint32_t 430 flash_conf_addr(struct qla_hw_data *ha, uint32_t faddr) 431 { 432 return ha->flash_conf_off | faddr; 433 } 434 435 static inline uint32_t 436 flash_data_addr(struct qla_hw_data *ha, uint32_t faddr) 437 { 438 return ha->flash_data_off | faddr; 439 } 440 441 static inline uint32_t 442 nvram_conf_addr(struct qla_hw_data *ha, uint32_t naddr) 443 { 444 return ha->nvram_conf_off | naddr; 445 } 446 447 static inline uint32_t 448 nvram_data_addr(struct qla_hw_data *ha, uint32_t naddr) 449 { 450 return ha->nvram_data_off | naddr; 451 } 452 453 static uint32_t 454 qla24xx_read_flash_dword(struct qla_hw_data *ha, uint32_t addr) 455 { 456 int rval; 457 uint32_t cnt, data; 458 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; 459 460 WRT_REG_DWORD(®->flash_addr, addr & ~FARX_DATA_FLAG); 461 /* Wait for READ cycle to complete. */ 462 rval = QLA_SUCCESS; 463 for (cnt = 3000; 464 (RD_REG_DWORD(®->flash_addr) & FARX_DATA_FLAG) == 0 && 465 rval == QLA_SUCCESS; cnt--) { 466 if (cnt) 467 udelay(10); 468 else 469 rval = QLA_FUNCTION_TIMEOUT; 470 cond_resched(); 471 } 472 473 /* TODO: What happens if we time out? */ 474 data = 0xDEADDEAD; 475 if (rval == QLA_SUCCESS) 476 data = RD_REG_DWORD(®->flash_data); 477 478 return data; 479 } 480 481 uint32_t * 482 qla24xx_read_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, 483 uint32_t dwords) 484 { 485 uint32_t i; 486 struct qla_hw_data *ha = vha->hw; 487 488 /* Dword reads to flash. */ 489 for (i = 0; i < dwords; i++, faddr++) 490 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha, 491 flash_data_addr(ha, faddr))); 492 493 return dwptr; 494 } 495 496 static int 497 qla24xx_write_flash_dword(struct qla_hw_data *ha, uint32_t addr, uint32_t data) 498 { 499 int rval; 500 uint32_t cnt; 501 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; 502 503 WRT_REG_DWORD(®->flash_data, data); 504 RD_REG_DWORD(®->flash_data); /* PCI Posting. */ 505 WRT_REG_DWORD(®->flash_addr, addr | FARX_DATA_FLAG); 506 /* Wait for Write cycle to complete. */ 507 rval = QLA_SUCCESS; 508 for (cnt = 500000; (RD_REG_DWORD(®->flash_addr) & FARX_DATA_FLAG) && 509 rval == QLA_SUCCESS; cnt--) { 510 if (cnt) 511 udelay(10); 512 else 513 rval = QLA_FUNCTION_TIMEOUT; 514 cond_resched(); 515 } 516 return rval; 517 } 518 519 static void 520 qla24xx_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id, 521 uint8_t *flash_id) 522 { 523 uint32_t ids; 524 525 ids = qla24xx_read_flash_dword(ha, flash_conf_addr(ha, 0x03ab)); 526 *man_id = LSB(ids); 527 *flash_id = MSB(ids); 528 529 /* Check if man_id and flash_id are valid. */ 530 if (ids != 0xDEADDEAD && (*man_id == 0 || *flash_id == 0)) { 531 /* Read information using 0x9f opcode 532 * Device ID, Mfg ID would be read in the format: 533 * <Ext Dev Info><Device ID Part2><Device ID Part 1><Mfg ID> 534 * Example: ATMEL 0x00 01 45 1F 535 * Extract MFG and Dev ID from last two bytes. 536 */ 537 ids = qla24xx_read_flash_dword(ha, flash_conf_addr(ha, 0x009f)); 538 *man_id = LSB(ids); 539 *flash_id = MSB(ids); 540 } 541 } 542 543 static int 544 qla2xxx_find_flt_start(scsi_qla_host_t *vha, uint32_t *start) 545 { 546 const char *loc, *locations[] = { "DEF", "PCI" }; 547 uint32_t pcihdr, pcids; 548 uint32_t *dcode; 549 uint8_t *buf, *bcode, last_image; 550 uint16_t cnt, chksum, *wptr; 551 struct qla_flt_location *fltl; 552 struct qla_hw_data *ha = vha->hw; 553 struct req_que *req = ha->req_q_map[0]; 554 555 /* 556 * FLT-location structure resides after the last PCI region. 557 */ 558 559 /* Begin with sane defaults. */ 560 loc = locations[0]; 561 *start = 0; 562 if (IS_QLA24XX_TYPE(ha)) 563 *start = FA_FLASH_LAYOUT_ADDR_24; 564 else if (IS_QLA25XX(ha)) 565 *start = FA_FLASH_LAYOUT_ADDR; 566 else if (IS_QLA81XX(ha)) 567 *start = FA_FLASH_LAYOUT_ADDR_81; 568 else if (IS_P3P_TYPE(ha)) { 569 *start = FA_FLASH_LAYOUT_ADDR_82; 570 goto end; 571 } else if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) { 572 *start = FA_FLASH_LAYOUT_ADDR_83; 573 goto end; 574 } 575 /* Begin with first PCI expansion ROM header. */ 576 buf = (uint8_t *)req->ring; 577 dcode = (uint32_t *)req->ring; 578 pcihdr = 0; 579 last_image = 1; 580 do { 581 /* Verify PCI expansion ROM header. */ 582 qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20); 583 bcode = buf + (pcihdr % 4); 584 if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa) 585 goto end; 586 587 /* Locate PCI data structure. */ 588 pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]); 589 qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20); 590 bcode = buf + (pcihdr % 4); 591 592 /* Validate signature of PCI data structure. */ 593 if (bcode[0x0] != 'P' || bcode[0x1] != 'C' || 594 bcode[0x2] != 'I' || bcode[0x3] != 'R') 595 goto end; 596 597 last_image = bcode[0x15] & BIT_7; 598 599 /* Locate next PCI expansion ROM. */ 600 pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512; 601 } while (!last_image); 602 603 /* Now verify FLT-location structure. */ 604 fltl = (struct qla_flt_location *)req->ring; 605 qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 606 sizeof(struct qla_flt_location) >> 2); 607 if (fltl->sig[0] != 'Q' || fltl->sig[1] != 'F' || 608 fltl->sig[2] != 'L' || fltl->sig[3] != 'T') 609 goto end; 610 611 wptr = (uint16_t *)req->ring; 612 cnt = sizeof(struct qla_flt_location) >> 1; 613 for (chksum = 0; cnt--; wptr++) 614 chksum += le16_to_cpu(*wptr); 615 if (chksum) { 616 ql_log(ql_log_fatal, vha, 0x0045, 617 "Inconsistent FLTL detected: checksum=0x%x.\n", chksum); 618 ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010e, 619 buf, sizeof(struct qla_flt_location)); 620 return QLA_FUNCTION_FAILED; 621 } 622 623 /* Good data. Use specified location. */ 624 loc = locations[1]; 625 *start = (le16_to_cpu(fltl->start_hi) << 16 | 626 le16_to_cpu(fltl->start_lo)) >> 2; 627 end: 628 ql_dbg(ql_dbg_init, vha, 0x0046, 629 "FLTL[%s] = 0x%x.\n", 630 loc, *start); 631 return QLA_SUCCESS; 632 } 633 634 static void 635 qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) 636 { 637 const char *loc, *locations[] = { "DEF", "FLT" }; 638 const uint32_t def_fw[] = 639 { FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR_81 }; 640 const uint32_t def_boot[] = 641 { FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR_81 }; 642 const uint32_t def_vpd_nvram[] = 643 { FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR_81 }; 644 const uint32_t def_vpd0[] = 645 { 0, 0, FA_VPD0_ADDR_81 }; 646 const uint32_t def_vpd1[] = 647 { 0, 0, FA_VPD1_ADDR_81 }; 648 const uint32_t def_nvram0[] = 649 { 0, 0, FA_NVRAM0_ADDR_81 }; 650 const uint32_t def_nvram1[] = 651 { 0, 0, FA_NVRAM1_ADDR_81 }; 652 const uint32_t def_fdt[] = 653 { FA_FLASH_DESCR_ADDR_24, FA_FLASH_DESCR_ADDR, 654 FA_FLASH_DESCR_ADDR_81 }; 655 const uint32_t def_npiv_conf0[] = 656 { FA_NPIV_CONF0_ADDR_24, FA_NPIV_CONF0_ADDR, 657 FA_NPIV_CONF0_ADDR_81 }; 658 const uint32_t def_npiv_conf1[] = 659 { FA_NPIV_CONF1_ADDR_24, FA_NPIV_CONF1_ADDR, 660 FA_NPIV_CONF1_ADDR_81 }; 661 const uint32_t fcp_prio_cfg0[] = 662 { FA_FCP_PRIO0_ADDR, FA_FCP_PRIO0_ADDR_25, 663 0 }; 664 const uint32_t fcp_prio_cfg1[] = 665 { FA_FCP_PRIO1_ADDR, FA_FCP_PRIO1_ADDR_25, 666 0 }; 667 uint32_t def; 668 uint16_t *wptr; 669 uint16_t cnt, chksum; 670 uint32_t start; 671 struct qla_flt_header *flt; 672 struct qla_flt_region *region; 673 struct qla_hw_data *ha = vha->hw; 674 struct req_que *req = ha->req_q_map[0]; 675 676 def = 0; 677 if (IS_QLA25XX(ha)) 678 def = 1; 679 else if (IS_QLA81XX(ha)) 680 def = 2; 681 682 /* Assign FCP prio region since older adapters may not have FLT, or 683 FCP prio region in it's FLT. 684 */ 685 ha->flt_region_fcp_prio = (ha->port_no == 0) ? 686 fcp_prio_cfg0[def] : fcp_prio_cfg1[def]; 687 688 ha->flt_region_flt = flt_addr; 689 wptr = (uint16_t *)req->ring; 690 flt = (struct qla_flt_header *)req->ring; 691 region = (struct qla_flt_region *)&flt[1]; 692 ha->isp_ops->read_optrom(vha, (uint8_t *)req->ring, 693 flt_addr << 2, OPTROM_BURST_SIZE); 694 if (*wptr == cpu_to_le16(0xffff)) 695 goto no_flash_data; 696 if (flt->version != cpu_to_le16(1)) { 697 ql_log(ql_log_warn, vha, 0x0047, 698 "Unsupported FLT detected: version=0x%x length=0x%x checksum=0x%x.\n", 699 le16_to_cpu(flt->version), le16_to_cpu(flt->length), 700 le16_to_cpu(flt->checksum)); 701 goto no_flash_data; 702 } 703 704 cnt = (sizeof(struct qla_flt_header) + le16_to_cpu(flt->length)) >> 1; 705 for (chksum = 0; cnt--; wptr++) 706 chksum += le16_to_cpu(*wptr); 707 if (chksum) { 708 ql_log(ql_log_fatal, vha, 0x0048, 709 "Inconsistent FLT detected: version=0x%x length=0x%x checksum=0x%x.\n", 710 le16_to_cpu(flt->version), le16_to_cpu(flt->length), 711 le16_to_cpu(flt->checksum)); 712 goto no_flash_data; 713 } 714 715 loc = locations[1]; 716 cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region); 717 for ( ; cnt; cnt--, region++) { 718 /* Store addresses as DWORD offsets. */ 719 start = le32_to_cpu(region->start) >> 2; 720 ql_dbg(ql_dbg_init, vha, 0x0049, 721 "FLT[%02x]: start=0x%x " 722 "end=0x%x size=0x%x.\n", le32_to_cpu(region->code) & 0xff, 723 start, le32_to_cpu(region->end) >> 2, 724 le32_to_cpu(region->size)); 725 726 switch (le32_to_cpu(region->code) & 0xff) { 727 case FLT_REG_FCOE_FW: 728 if (!IS_QLA8031(ha)) 729 break; 730 ha->flt_region_fw = start; 731 break; 732 case FLT_REG_FW: 733 if (IS_QLA8031(ha)) 734 break; 735 ha->flt_region_fw = start; 736 break; 737 case FLT_REG_BOOT_CODE: 738 ha->flt_region_boot = start; 739 break; 740 case FLT_REG_VPD_0: 741 if (IS_QLA8031(ha)) 742 break; 743 ha->flt_region_vpd_nvram = start; 744 if (IS_P3P_TYPE(ha)) 745 break; 746 if (ha->port_no == 0) 747 ha->flt_region_vpd = start; 748 break; 749 case FLT_REG_VPD_1: 750 if (IS_P3P_TYPE(ha) || IS_QLA8031(ha)) 751 break; 752 if (ha->port_no == 1) 753 ha->flt_region_vpd = start; 754 break; 755 case FLT_REG_VPD_2: 756 if (!IS_QLA27XX(ha)) 757 break; 758 if (ha->port_no == 2) 759 ha->flt_region_vpd = start; 760 break; 761 case FLT_REG_VPD_3: 762 if (!IS_QLA27XX(ha)) 763 break; 764 if (ha->port_no == 3) 765 ha->flt_region_vpd = start; 766 break; 767 case FLT_REG_NVRAM_0: 768 if (IS_QLA8031(ha)) 769 break; 770 if (ha->port_no == 0) 771 ha->flt_region_nvram = start; 772 break; 773 case FLT_REG_NVRAM_1: 774 if (IS_QLA8031(ha)) 775 break; 776 if (ha->port_no == 1) 777 ha->flt_region_nvram = start; 778 break; 779 case FLT_REG_NVRAM_2: 780 if (!IS_QLA27XX(ha)) 781 break; 782 if (ha->port_no == 2) 783 ha->flt_region_nvram = start; 784 break; 785 case FLT_REG_NVRAM_3: 786 if (!IS_QLA27XX(ha)) 787 break; 788 if (ha->port_no == 3) 789 ha->flt_region_nvram = start; 790 break; 791 case FLT_REG_FDT: 792 ha->flt_region_fdt = start; 793 break; 794 case FLT_REG_NPIV_CONF_0: 795 if (ha->port_no == 0) 796 ha->flt_region_npiv_conf = start; 797 break; 798 case FLT_REG_NPIV_CONF_1: 799 if (ha->port_no == 1) 800 ha->flt_region_npiv_conf = start; 801 break; 802 case FLT_REG_GOLD_FW: 803 ha->flt_region_gold_fw = start; 804 break; 805 case FLT_REG_FCP_PRIO_0: 806 if (ha->port_no == 0) 807 ha->flt_region_fcp_prio = start; 808 break; 809 case FLT_REG_FCP_PRIO_1: 810 if (ha->port_no == 1) 811 ha->flt_region_fcp_prio = start; 812 break; 813 case FLT_REG_BOOT_CODE_82XX: 814 ha->flt_region_boot = start; 815 break; 816 case FLT_REG_BOOT_CODE_8044: 817 if (IS_QLA8044(ha)) 818 ha->flt_region_boot = start; 819 break; 820 case FLT_REG_FW_82XX: 821 ha->flt_region_fw = start; 822 break; 823 case FLT_REG_CNA_FW: 824 if (IS_CNA_CAPABLE(ha)) 825 ha->flt_region_fw = start; 826 break; 827 case FLT_REG_GOLD_FW_82XX: 828 ha->flt_region_gold_fw = start; 829 break; 830 case FLT_REG_BOOTLOAD_82XX: 831 ha->flt_region_bootload = start; 832 break; 833 case FLT_REG_VPD_8XXX: 834 if (IS_CNA_CAPABLE(ha)) 835 ha->flt_region_vpd = start; 836 break; 837 case FLT_REG_FCOE_NVRAM_0: 838 if (!(IS_QLA8031(ha) || IS_QLA8044(ha))) 839 break; 840 if (ha->port_no == 0) 841 ha->flt_region_nvram = start; 842 break; 843 case FLT_REG_FCOE_NVRAM_1: 844 if (!(IS_QLA8031(ha) || IS_QLA8044(ha))) 845 break; 846 if (ha->port_no == 1) 847 ha->flt_region_nvram = start; 848 break; 849 case FLT_REG_IMG_PRI_27XX: 850 if (IS_QLA27XX(ha)) 851 ha->flt_region_img_status_pri = start; 852 break; 853 case FLT_REG_IMG_SEC_27XX: 854 if (IS_QLA27XX(ha)) 855 ha->flt_region_img_status_sec = start; 856 break; 857 case FLT_REG_FW_SEC_27XX: 858 if (IS_QLA27XX(ha)) 859 ha->flt_region_fw_sec = start; 860 break; 861 case FLT_REG_BOOTLOAD_SEC_27XX: 862 if (IS_QLA27XX(ha)) 863 ha->flt_region_boot_sec = start; 864 break; 865 case FLT_REG_VPD_SEC_27XX_0: 866 if (IS_QLA27XX(ha)) 867 ha->flt_region_vpd_sec = start; 868 break; 869 case FLT_REG_VPD_SEC_27XX_1: 870 if (IS_QLA27XX(ha)) 871 ha->flt_region_vpd_sec = start; 872 break; 873 case FLT_REG_VPD_SEC_27XX_2: 874 if (IS_QLA27XX(ha)) 875 ha->flt_region_vpd_sec = start; 876 break; 877 case FLT_REG_VPD_SEC_27XX_3: 878 if (IS_QLA27XX(ha)) 879 ha->flt_region_vpd_sec = start; 880 break; 881 } 882 } 883 goto done; 884 885 no_flash_data: 886 /* Use hardcoded defaults. */ 887 loc = locations[0]; 888 ha->flt_region_fw = def_fw[def]; 889 ha->flt_region_boot = def_boot[def]; 890 ha->flt_region_vpd_nvram = def_vpd_nvram[def]; 891 ha->flt_region_vpd = (ha->port_no == 0) ? 892 def_vpd0[def] : def_vpd1[def]; 893 ha->flt_region_nvram = (ha->port_no == 0) ? 894 def_nvram0[def] : def_nvram1[def]; 895 ha->flt_region_fdt = def_fdt[def]; 896 ha->flt_region_npiv_conf = (ha->port_no == 0) ? 897 def_npiv_conf0[def] : def_npiv_conf1[def]; 898 done: 899 ql_dbg(ql_dbg_init, vha, 0x004a, 900 "FLT[%s]: boot=0x%x fw=0x%x vpd_nvram=0x%x vpd=0x%x nvram=0x%x " 901 "fdt=0x%x flt=0x%x npiv=0x%x fcp_prif_cfg=0x%x.\n", 902 loc, ha->flt_region_boot, ha->flt_region_fw, 903 ha->flt_region_vpd_nvram, ha->flt_region_vpd, ha->flt_region_nvram, 904 ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_npiv_conf, 905 ha->flt_region_fcp_prio); 906 } 907 908 static void 909 qla2xxx_get_fdt_info(scsi_qla_host_t *vha) 910 { 911 #define FLASH_BLK_SIZE_4K 0x1000 912 #define FLASH_BLK_SIZE_32K 0x8000 913 #define FLASH_BLK_SIZE_64K 0x10000 914 const char *loc, *locations[] = { "MID", "FDT" }; 915 uint16_t cnt, chksum; 916 uint16_t *wptr; 917 struct qla_fdt_layout *fdt; 918 uint8_t man_id, flash_id; 919 uint16_t mid = 0, fid = 0; 920 struct qla_hw_data *ha = vha->hw; 921 struct req_que *req = ha->req_q_map[0]; 922 923 wptr = (uint16_t *)req->ring; 924 fdt = (struct qla_fdt_layout *)req->ring; 925 ha->isp_ops->read_optrom(vha, (uint8_t *)req->ring, 926 ha->flt_region_fdt << 2, OPTROM_BURST_SIZE); 927 if (*wptr == cpu_to_le16(0xffff)) 928 goto no_flash_data; 929 if (fdt->sig[0] != 'Q' || fdt->sig[1] != 'L' || fdt->sig[2] != 'I' || 930 fdt->sig[3] != 'D') 931 goto no_flash_data; 932 933 for (cnt = 0, chksum = 0; cnt < sizeof(*fdt) >> 1; cnt++, wptr++) 934 chksum += le16_to_cpu(*wptr); 935 if (chksum) { 936 ql_dbg(ql_dbg_init, vha, 0x004c, 937 "Inconsistent FDT detected:" 938 " checksum=0x%x id=%c version0x%x.\n", chksum, 939 fdt->sig[0], le16_to_cpu(fdt->version)); 940 ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0113, 941 (uint8_t *)fdt, sizeof(*fdt)); 942 goto no_flash_data; 943 } 944 945 loc = locations[1]; 946 mid = le16_to_cpu(fdt->man_id); 947 fid = le16_to_cpu(fdt->id); 948 ha->fdt_wrt_disable = fdt->wrt_disable_bits; 949 ha->fdt_wrt_enable = fdt->wrt_enable_bits; 950 ha->fdt_wrt_sts_reg_cmd = fdt->wrt_sts_reg_cmd; 951 if (IS_QLA8044(ha)) 952 ha->fdt_erase_cmd = fdt->erase_cmd; 953 else 954 ha->fdt_erase_cmd = 955 flash_conf_addr(ha, 0x0300 | fdt->erase_cmd); 956 ha->fdt_block_size = le32_to_cpu(fdt->block_size); 957 if (fdt->unprotect_sec_cmd) { 958 ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0300 | 959 fdt->unprotect_sec_cmd); 960 ha->fdt_protect_sec_cmd = fdt->protect_sec_cmd ? 961 flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd): 962 flash_conf_addr(ha, 0x0336); 963 } 964 goto done; 965 no_flash_data: 966 loc = locations[0]; 967 if (IS_P3P_TYPE(ha)) { 968 ha->fdt_block_size = FLASH_BLK_SIZE_64K; 969 goto done; 970 } 971 qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id); 972 mid = man_id; 973 fid = flash_id; 974 ha->fdt_wrt_disable = 0x9c; 975 ha->fdt_erase_cmd = flash_conf_addr(ha, 0x03d8); 976 switch (man_id) { 977 case 0xbf: /* STT flash. */ 978 if (flash_id == 0x8e) 979 ha->fdt_block_size = FLASH_BLK_SIZE_64K; 980 else 981 ha->fdt_block_size = FLASH_BLK_SIZE_32K; 982 983 if (flash_id == 0x80) 984 ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0352); 985 break; 986 case 0x13: /* ST M25P80. */ 987 ha->fdt_block_size = FLASH_BLK_SIZE_64K; 988 break; 989 case 0x1f: /* Atmel 26DF081A. */ 990 ha->fdt_block_size = FLASH_BLK_SIZE_4K; 991 ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0320); 992 ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0339); 993 ha->fdt_protect_sec_cmd = flash_conf_addr(ha, 0x0336); 994 break; 995 default: 996 /* Default to 64 kb sector size. */ 997 ha->fdt_block_size = FLASH_BLK_SIZE_64K; 998 break; 999 } 1000 done: 1001 ql_dbg(ql_dbg_init, vha, 0x004d, 1002 "FDT[%s]: (0x%x/0x%x) erase=0x%x " 1003 "pr=%x wrtd=0x%x blk=0x%x.\n", 1004 loc, mid, fid, 1005 ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd, 1006 ha->fdt_wrt_disable, ha->fdt_block_size); 1007 1008 } 1009 1010 static void 1011 qla2xxx_get_idc_param(scsi_qla_host_t *vha) 1012 { 1013 #define QLA82XX_IDC_PARAM_ADDR 0x003e885c 1014 uint32_t *wptr; 1015 struct qla_hw_data *ha = vha->hw; 1016 struct req_que *req = ha->req_q_map[0]; 1017 1018 if (!(IS_P3P_TYPE(ha))) 1019 return; 1020 1021 wptr = (uint32_t *)req->ring; 1022 ha->isp_ops->read_optrom(vha, (uint8_t *)req->ring, 1023 QLA82XX_IDC_PARAM_ADDR , 8); 1024 1025 if (*wptr == cpu_to_le32(0xffffffff)) { 1026 ha->fcoe_dev_init_timeout = QLA82XX_ROM_DEV_INIT_TIMEOUT; 1027 ha->fcoe_reset_timeout = QLA82XX_ROM_DRV_RESET_ACK_TIMEOUT; 1028 } else { 1029 ha->fcoe_dev_init_timeout = le32_to_cpu(*wptr); 1030 wptr++; 1031 ha->fcoe_reset_timeout = le32_to_cpu(*wptr); 1032 } 1033 ql_dbg(ql_dbg_init, vha, 0x004e, 1034 "fcoe_dev_init_timeout=%d " 1035 "fcoe_reset_timeout=%d.\n", ha->fcoe_dev_init_timeout, 1036 ha->fcoe_reset_timeout); 1037 return; 1038 } 1039 1040 int 1041 qla2xxx_get_flash_info(scsi_qla_host_t *vha) 1042 { 1043 int ret; 1044 uint32_t flt_addr; 1045 struct qla_hw_data *ha = vha->hw; 1046 1047 if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && 1048 !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha) && !IS_QLA27XX(ha)) 1049 return QLA_SUCCESS; 1050 1051 ret = qla2xxx_find_flt_start(vha, &flt_addr); 1052 if (ret != QLA_SUCCESS) 1053 return ret; 1054 1055 qla2xxx_get_flt_info(vha, flt_addr); 1056 qla2xxx_get_fdt_info(vha); 1057 qla2xxx_get_idc_param(vha); 1058 1059 return QLA_SUCCESS; 1060 } 1061 1062 void 1063 qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha) 1064 { 1065 #define NPIV_CONFIG_SIZE (16*1024) 1066 void *data; 1067 uint16_t *wptr; 1068 uint16_t cnt, chksum; 1069 int i; 1070 struct qla_npiv_header hdr; 1071 struct qla_npiv_entry *entry; 1072 struct qla_hw_data *ha = vha->hw; 1073 1074 if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && 1075 !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha)) 1076 return; 1077 1078 if (ha->flags.nic_core_reset_hdlr_active) 1079 return; 1080 1081 if (IS_QLA8044(ha)) 1082 return; 1083 1084 ha->isp_ops->read_optrom(vha, (uint8_t *)&hdr, 1085 ha->flt_region_npiv_conf << 2, sizeof(struct qla_npiv_header)); 1086 if (hdr.version == cpu_to_le16(0xffff)) 1087 return; 1088 if (hdr.version != cpu_to_le16(1)) { 1089 ql_dbg(ql_dbg_user, vha, 0x7090, 1090 "Unsupported NPIV-Config " 1091 "detected: version=0x%x entries=0x%x checksum=0x%x.\n", 1092 le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries), 1093 le16_to_cpu(hdr.checksum)); 1094 return; 1095 } 1096 1097 data = kmalloc(NPIV_CONFIG_SIZE, GFP_KERNEL); 1098 if (!data) { 1099 ql_log(ql_log_warn, vha, 0x7091, 1100 "Unable to allocate memory for data.\n"); 1101 return; 1102 } 1103 1104 ha->isp_ops->read_optrom(vha, (uint8_t *)data, 1105 ha->flt_region_npiv_conf << 2, NPIV_CONFIG_SIZE); 1106 1107 cnt = (sizeof(hdr) + le16_to_cpu(hdr.entries) * sizeof(*entry)) >> 1; 1108 for (wptr = data, chksum = 0; cnt--; wptr++) 1109 chksum += le16_to_cpu(*wptr); 1110 if (chksum) { 1111 ql_dbg(ql_dbg_user, vha, 0x7092, 1112 "Inconsistent NPIV-Config " 1113 "detected: version=0x%x entries=0x%x checksum=0x%x.\n", 1114 le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries), 1115 le16_to_cpu(hdr.checksum)); 1116 goto done; 1117 } 1118 1119 entry = data + sizeof(struct qla_npiv_header); 1120 cnt = le16_to_cpu(hdr.entries); 1121 for (i = 0; cnt; cnt--, entry++, i++) { 1122 uint16_t flags; 1123 struct fc_vport_identifiers vid; 1124 struct fc_vport *vport; 1125 1126 memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry)); 1127 1128 flags = le16_to_cpu(entry->flags); 1129 if (flags == 0xffff) 1130 continue; 1131 if ((flags & BIT_0) == 0) 1132 continue; 1133 1134 memset(&vid, 0, sizeof(vid)); 1135 vid.roles = FC_PORT_ROLE_FCP_INITIATOR; 1136 vid.vport_type = FC_PORTTYPE_NPIV; 1137 vid.disable = false; 1138 vid.port_name = wwn_to_u64(entry->port_name); 1139 vid.node_name = wwn_to_u64(entry->node_name); 1140 1141 ql_dbg(ql_dbg_user, vha, 0x7093, 1142 "NPIV[%02x]: wwpn=%llx " 1143 "wwnn=%llx vf_id=0x%x Q_qos=0x%x F_qos=0x%x.\n", cnt, 1144 (unsigned long long)vid.port_name, 1145 (unsigned long long)vid.node_name, 1146 le16_to_cpu(entry->vf_id), 1147 entry->q_qos, entry->f_qos); 1148 1149 if (i < QLA_PRECONFIG_VPORTS) { 1150 vport = fc_vport_create(vha->host, 0, &vid); 1151 if (!vport) 1152 ql_log(ql_log_warn, vha, 0x7094, 1153 "NPIV-Config Failed to create vport [%02x]: " 1154 "wwpn=%llx wwnn=%llx.\n", cnt, 1155 (unsigned long long)vid.port_name, 1156 (unsigned long long)vid.node_name); 1157 } 1158 } 1159 done: 1160 kfree(data); 1161 } 1162 1163 static int 1164 qla24xx_unprotect_flash(scsi_qla_host_t *vha) 1165 { 1166 struct qla_hw_data *ha = vha->hw; 1167 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; 1168 1169 if (ha->flags.fac_supported) 1170 return qla81xx_fac_do_write_enable(vha, 1); 1171 1172 /* Enable flash write. */ 1173 WRT_REG_DWORD(®->ctrl_status, 1174 RD_REG_DWORD(®->ctrl_status) | CSRX_FLASH_ENABLE); 1175 RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */ 1176 1177 if (!ha->fdt_wrt_disable) 1178 goto done; 1179 1180 /* Disable flash write-protection, first clear SR protection bit */ 1181 qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); 1182 /* Then write zero again to clear remaining SR bits.*/ 1183 qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); 1184 done: 1185 return QLA_SUCCESS; 1186 } 1187 1188 static int 1189 qla24xx_protect_flash(scsi_qla_host_t *vha) 1190 { 1191 uint32_t cnt; 1192 struct qla_hw_data *ha = vha->hw; 1193 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; 1194 1195 if (ha->flags.fac_supported) 1196 return qla81xx_fac_do_write_enable(vha, 0); 1197 1198 if (!ha->fdt_wrt_disable) 1199 goto skip_wrt_protect; 1200 1201 /* Enable flash write-protection and wait for completion. */ 1202 qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 1203 ha->fdt_wrt_disable); 1204 for (cnt = 300; cnt && 1205 qla24xx_read_flash_dword(ha, flash_conf_addr(ha, 0x005)) & BIT_0; 1206 cnt--) { 1207 udelay(10); 1208 } 1209 1210 skip_wrt_protect: 1211 /* Disable flash write. */ 1212 WRT_REG_DWORD(®->ctrl_status, 1213 RD_REG_DWORD(®->ctrl_status) & ~CSRX_FLASH_ENABLE); 1214 RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */ 1215 1216 return QLA_SUCCESS; 1217 } 1218 1219 static int 1220 qla24xx_erase_sector(scsi_qla_host_t *vha, uint32_t fdata) 1221 { 1222 struct qla_hw_data *ha = vha->hw; 1223 uint32_t start, finish; 1224 1225 if (ha->flags.fac_supported) { 1226 start = fdata >> 2; 1227 finish = start + (ha->fdt_block_size >> 2) - 1; 1228 return qla81xx_fac_erase_sector(vha, flash_data_addr(ha, 1229 start), flash_data_addr(ha, finish)); 1230 } 1231 1232 return qla24xx_write_flash_dword(ha, ha->fdt_erase_cmd, 1233 (fdata & 0xff00) | ((fdata << 16) & 0xff0000) | 1234 ((fdata >> 16) & 0xff)); 1235 } 1236 1237 static int 1238 qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, 1239 uint32_t dwords) 1240 { 1241 int ret; 1242 uint32_t liter; 1243 uint32_t sec_mask, rest_addr; 1244 uint32_t fdata; 1245 dma_addr_t optrom_dma; 1246 void *optrom = NULL; 1247 struct qla_hw_data *ha = vha->hw; 1248 1249 /* Prepare burst-capable write on supported ISPs. */ 1250 if ((IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) || 1251 IS_QLA27XX(ha)) && 1252 !(faddr & 0xfff) && dwords > OPTROM_BURST_DWORDS) { 1253 optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, 1254 &optrom_dma, GFP_KERNEL); 1255 if (!optrom) { 1256 ql_log(ql_log_warn, vha, 0x7095, 1257 "Unable to allocate " 1258 "memory for optrom burst write (%x KB).\n", 1259 OPTROM_BURST_SIZE / 1024); 1260 } 1261 } 1262 1263 rest_addr = (ha->fdt_block_size >> 2) - 1; 1264 sec_mask = ~rest_addr; 1265 1266 ret = qla24xx_unprotect_flash(vha); 1267 if (ret != QLA_SUCCESS) { 1268 ql_log(ql_log_warn, vha, 0x7096, 1269 "Unable to unprotect flash for update.\n"); 1270 goto done; 1271 } 1272 1273 for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) { 1274 fdata = (faddr & sec_mask) << 2; 1275 1276 /* Are we at the beginning of a sector? */ 1277 if ((faddr & rest_addr) == 0) { 1278 /* Do sector unprotect. */ 1279 if (ha->fdt_unprotect_sec_cmd) 1280 qla24xx_write_flash_dword(ha, 1281 ha->fdt_unprotect_sec_cmd, 1282 (fdata & 0xff00) | ((fdata << 16) & 1283 0xff0000) | ((fdata >> 16) & 0xff)); 1284 ret = qla24xx_erase_sector(vha, fdata); 1285 if (ret != QLA_SUCCESS) { 1286 ql_dbg(ql_dbg_user, vha, 0x7007, 1287 "Unable to erase erase sector: address=%x.\n", 1288 faddr); 1289 break; 1290 } 1291 } 1292 1293 /* Go with burst-write. */ 1294 if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) { 1295 /* Copy data to DMA'ble buffer. */ 1296 memcpy(optrom, dwptr, OPTROM_BURST_SIZE); 1297 1298 ret = qla2x00_load_ram(vha, optrom_dma, 1299 flash_data_addr(ha, faddr), 1300 OPTROM_BURST_DWORDS); 1301 if (ret != QLA_SUCCESS) { 1302 ql_log(ql_log_warn, vha, 0x7097, 1303 "Unable to burst-write optrom segment " 1304 "(%x/%x/%llx).\n", ret, 1305 flash_data_addr(ha, faddr), 1306 (unsigned long long)optrom_dma); 1307 ql_log(ql_log_warn, vha, 0x7098, 1308 "Reverting to slow-write.\n"); 1309 1310 dma_free_coherent(&ha->pdev->dev, 1311 OPTROM_BURST_SIZE, optrom, optrom_dma); 1312 optrom = NULL; 1313 } else { 1314 liter += OPTROM_BURST_DWORDS - 1; 1315 faddr += OPTROM_BURST_DWORDS - 1; 1316 dwptr += OPTROM_BURST_DWORDS - 1; 1317 continue; 1318 } 1319 } 1320 1321 ret = qla24xx_write_flash_dword(ha, 1322 flash_data_addr(ha, faddr), cpu_to_le32(*dwptr)); 1323 if (ret != QLA_SUCCESS) { 1324 ql_dbg(ql_dbg_user, vha, 0x7006, 1325 "Unable to program flash address=%x data=%x.\n", 1326 faddr, *dwptr); 1327 break; 1328 } 1329 1330 /* Do sector protect. */ 1331 if (ha->fdt_unprotect_sec_cmd && 1332 ((faddr & rest_addr) == rest_addr)) 1333 qla24xx_write_flash_dword(ha, 1334 ha->fdt_protect_sec_cmd, 1335 (fdata & 0xff00) | ((fdata << 16) & 1336 0xff0000) | ((fdata >> 16) & 0xff)); 1337 } 1338 1339 ret = qla24xx_protect_flash(vha); 1340 if (ret != QLA_SUCCESS) 1341 ql_log(ql_log_warn, vha, 0x7099, 1342 "Unable to protect flash after update.\n"); 1343 done: 1344 if (optrom) 1345 dma_free_coherent(&ha->pdev->dev, 1346 OPTROM_BURST_SIZE, optrom, optrom_dma); 1347 1348 return ret; 1349 } 1350 1351 uint8_t * 1352 qla2x00_read_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr, 1353 uint32_t bytes) 1354 { 1355 uint32_t i; 1356 uint16_t *wptr; 1357 struct qla_hw_data *ha = vha->hw; 1358 1359 /* Word reads to NVRAM via registers. */ 1360 wptr = (uint16_t *)buf; 1361 qla2x00_lock_nvram_access(ha); 1362 for (i = 0; i < bytes >> 1; i++, naddr++) 1363 wptr[i] = cpu_to_le16(qla2x00_get_nvram_word(ha, 1364 naddr)); 1365 qla2x00_unlock_nvram_access(ha); 1366 1367 return buf; 1368 } 1369 1370 uint8_t * 1371 qla24xx_read_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr, 1372 uint32_t bytes) 1373 { 1374 uint32_t i; 1375 uint32_t *dwptr; 1376 struct qla_hw_data *ha = vha->hw; 1377 1378 if (IS_P3P_TYPE(ha)) 1379 return buf; 1380 1381 /* Dword reads to flash. */ 1382 dwptr = (uint32_t *)buf; 1383 for (i = 0; i < bytes >> 2; i++, naddr++) 1384 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha, 1385 nvram_data_addr(ha, naddr))); 1386 1387 return buf; 1388 } 1389 1390 int 1391 qla2x00_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr, 1392 uint32_t bytes) 1393 { 1394 int ret, stat; 1395 uint32_t i; 1396 uint16_t *wptr; 1397 unsigned long flags; 1398 struct qla_hw_data *ha = vha->hw; 1399 1400 ret = QLA_SUCCESS; 1401 1402 spin_lock_irqsave(&ha->hardware_lock, flags); 1403 qla2x00_lock_nvram_access(ha); 1404 1405 /* Disable NVRAM write-protection. */ 1406 stat = qla2x00_clear_nvram_protection(ha); 1407 1408 wptr = (uint16_t *)buf; 1409 for (i = 0; i < bytes >> 1; i++, naddr++) { 1410 qla2x00_write_nvram_word(ha, naddr, 1411 cpu_to_le16(*wptr)); 1412 wptr++; 1413 } 1414 1415 /* Enable NVRAM write-protection. */ 1416 qla2x00_set_nvram_protection(ha, stat); 1417 1418 qla2x00_unlock_nvram_access(ha); 1419 spin_unlock_irqrestore(&ha->hardware_lock, flags); 1420 1421 return ret; 1422 } 1423 1424 int 1425 qla24xx_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr, 1426 uint32_t bytes) 1427 { 1428 int ret; 1429 uint32_t i; 1430 uint32_t *dwptr; 1431 struct qla_hw_data *ha = vha->hw; 1432 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; 1433 1434 ret = QLA_SUCCESS; 1435 1436 if (IS_P3P_TYPE(ha)) 1437 return ret; 1438 1439 /* Enable flash write. */ 1440 WRT_REG_DWORD(®->ctrl_status, 1441 RD_REG_DWORD(®->ctrl_status) | CSRX_FLASH_ENABLE); 1442 RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */ 1443 1444 /* Disable NVRAM write-protection. */ 1445 qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0); 1446 qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0); 1447 1448 /* Dword writes to flash. */ 1449 dwptr = (uint32_t *)buf; 1450 for (i = 0; i < bytes >> 2; i++, naddr++, dwptr++) { 1451 ret = qla24xx_write_flash_dword(ha, 1452 nvram_data_addr(ha, naddr), cpu_to_le32(*dwptr)); 1453 if (ret != QLA_SUCCESS) { 1454 ql_dbg(ql_dbg_user, vha, 0x709a, 1455 "Unable to program nvram address=%x data=%x.\n", 1456 naddr, *dwptr); 1457 break; 1458 } 1459 } 1460 1461 /* Enable NVRAM write-protection. */ 1462 qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0x8c); 1463 1464 /* Disable flash write. */ 1465 WRT_REG_DWORD(®->ctrl_status, 1466 RD_REG_DWORD(®->ctrl_status) & ~CSRX_FLASH_ENABLE); 1467 RD_REG_DWORD(®->ctrl_status); /* PCI Posting. */ 1468 1469 return ret; 1470 } 1471 1472 uint8_t * 1473 qla25xx_read_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr, 1474 uint32_t bytes) 1475 { 1476 uint32_t i; 1477 uint32_t *dwptr; 1478 struct qla_hw_data *ha = vha->hw; 1479 1480 /* Dword reads to flash. */ 1481 dwptr = (uint32_t *)buf; 1482 for (i = 0; i < bytes >> 2; i++, naddr++) 1483 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha, 1484 flash_data_addr(ha, ha->flt_region_vpd_nvram | naddr))); 1485 1486 return buf; 1487 } 1488 1489 int 1490 qla25xx_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr, 1491 uint32_t bytes) 1492 { 1493 struct qla_hw_data *ha = vha->hw; 1494 #define RMW_BUFFER_SIZE (64 * 1024) 1495 uint8_t *dbuf; 1496 1497 dbuf = vmalloc(RMW_BUFFER_SIZE); 1498 if (!dbuf) 1499 return QLA_MEMORY_ALLOC_FAILED; 1500 ha->isp_ops->read_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2, 1501 RMW_BUFFER_SIZE); 1502 memcpy(dbuf + (naddr << 2), buf, bytes); 1503 ha->isp_ops->write_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2, 1504 RMW_BUFFER_SIZE); 1505 vfree(dbuf); 1506 1507 return QLA_SUCCESS; 1508 } 1509 1510 static inline void 1511 qla2x00_flip_colors(struct qla_hw_data *ha, uint16_t *pflags) 1512 { 1513 if (IS_QLA2322(ha)) { 1514 /* Flip all colors. */ 1515 if (ha->beacon_color_state == QLA_LED_ALL_ON) { 1516 /* Turn off. */ 1517 ha->beacon_color_state = 0; 1518 *pflags = GPIO_LED_ALL_OFF; 1519 } else { 1520 /* Turn on. */ 1521 ha->beacon_color_state = QLA_LED_ALL_ON; 1522 *pflags = GPIO_LED_RGA_ON; 1523 } 1524 } else { 1525 /* Flip green led only. */ 1526 if (ha->beacon_color_state == QLA_LED_GRN_ON) { 1527 /* Turn off. */ 1528 ha->beacon_color_state = 0; 1529 *pflags = GPIO_LED_GREEN_OFF_AMBER_OFF; 1530 } else { 1531 /* Turn on. */ 1532 ha->beacon_color_state = QLA_LED_GRN_ON; 1533 *pflags = GPIO_LED_GREEN_ON_AMBER_OFF; 1534 } 1535 } 1536 } 1537 1538 #define PIO_REG(h, r) ((h)->pio_address + offsetof(struct device_reg_2xxx, r)) 1539 1540 void 1541 qla2x00_beacon_blink(struct scsi_qla_host *vha) 1542 { 1543 uint16_t gpio_enable; 1544 uint16_t gpio_data; 1545 uint16_t led_color = 0; 1546 unsigned long flags; 1547 struct qla_hw_data *ha = vha->hw; 1548 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 1549 1550 if (IS_P3P_TYPE(ha)) 1551 return; 1552 1553 spin_lock_irqsave(&ha->hardware_lock, flags); 1554 1555 /* Save the Original GPIOE. */ 1556 if (ha->pio_address) { 1557 gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe)); 1558 gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod)); 1559 } else { 1560 gpio_enable = RD_REG_WORD(®->gpioe); 1561 gpio_data = RD_REG_WORD(®->gpiod); 1562 } 1563 1564 /* Set the modified gpio_enable values */ 1565 gpio_enable |= GPIO_LED_MASK; 1566 1567 if (ha->pio_address) { 1568 WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable); 1569 } else { 1570 WRT_REG_WORD(®->gpioe, gpio_enable); 1571 RD_REG_WORD(®->gpioe); 1572 } 1573 1574 qla2x00_flip_colors(ha, &led_color); 1575 1576 /* Clear out any previously set LED color. */ 1577 gpio_data &= ~GPIO_LED_MASK; 1578 1579 /* Set the new input LED color to GPIOD. */ 1580 gpio_data |= led_color; 1581 1582 /* Set the modified gpio_data values */ 1583 if (ha->pio_address) { 1584 WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data); 1585 } else { 1586 WRT_REG_WORD(®->gpiod, gpio_data); 1587 RD_REG_WORD(®->gpiod); 1588 } 1589 1590 spin_unlock_irqrestore(&ha->hardware_lock, flags); 1591 } 1592 1593 int 1594 qla2x00_beacon_on(struct scsi_qla_host *vha) 1595 { 1596 uint16_t gpio_enable; 1597 uint16_t gpio_data; 1598 unsigned long flags; 1599 struct qla_hw_data *ha = vha->hw; 1600 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 1601 1602 ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING; 1603 ha->fw_options[1] |= FO1_DISABLE_GPIO6_7; 1604 1605 if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) { 1606 ql_log(ql_log_warn, vha, 0x709b, 1607 "Unable to update fw options (beacon on).\n"); 1608 return QLA_FUNCTION_FAILED; 1609 } 1610 1611 /* Turn off LEDs. */ 1612 spin_lock_irqsave(&ha->hardware_lock, flags); 1613 if (ha->pio_address) { 1614 gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe)); 1615 gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod)); 1616 } else { 1617 gpio_enable = RD_REG_WORD(®->gpioe); 1618 gpio_data = RD_REG_WORD(®->gpiod); 1619 } 1620 gpio_enable |= GPIO_LED_MASK; 1621 1622 /* Set the modified gpio_enable values. */ 1623 if (ha->pio_address) { 1624 WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable); 1625 } else { 1626 WRT_REG_WORD(®->gpioe, gpio_enable); 1627 RD_REG_WORD(®->gpioe); 1628 } 1629 1630 /* Clear out previously set LED colour. */ 1631 gpio_data &= ~GPIO_LED_MASK; 1632 if (ha->pio_address) { 1633 WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data); 1634 } else { 1635 WRT_REG_WORD(®->gpiod, gpio_data); 1636 RD_REG_WORD(®->gpiod); 1637 } 1638 spin_unlock_irqrestore(&ha->hardware_lock, flags); 1639 1640 /* 1641 * Let the per HBA timer kick off the blinking process based on 1642 * the following flags. No need to do anything else now. 1643 */ 1644 ha->beacon_blink_led = 1; 1645 ha->beacon_color_state = 0; 1646 1647 return QLA_SUCCESS; 1648 } 1649 1650 int 1651 qla2x00_beacon_off(struct scsi_qla_host *vha) 1652 { 1653 int rval = QLA_SUCCESS; 1654 struct qla_hw_data *ha = vha->hw; 1655 1656 ha->beacon_blink_led = 0; 1657 1658 /* Set the on flag so when it gets flipped it will be off. */ 1659 if (IS_QLA2322(ha)) 1660 ha->beacon_color_state = QLA_LED_ALL_ON; 1661 else 1662 ha->beacon_color_state = QLA_LED_GRN_ON; 1663 1664 ha->isp_ops->beacon_blink(vha); /* This turns green LED off */ 1665 1666 ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING; 1667 ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7; 1668 1669 rval = qla2x00_set_fw_options(vha, ha->fw_options); 1670 if (rval != QLA_SUCCESS) 1671 ql_log(ql_log_warn, vha, 0x709c, 1672 "Unable to update fw options (beacon off).\n"); 1673 return rval; 1674 } 1675 1676 1677 static inline void 1678 qla24xx_flip_colors(struct qla_hw_data *ha, uint16_t *pflags) 1679 { 1680 /* Flip all colors. */ 1681 if (ha->beacon_color_state == QLA_LED_ALL_ON) { 1682 /* Turn off. */ 1683 ha->beacon_color_state = 0; 1684 *pflags = 0; 1685 } else { 1686 /* Turn on. */ 1687 ha->beacon_color_state = QLA_LED_ALL_ON; 1688 *pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON; 1689 } 1690 } 1691 1692 void 1693 qla24xx_beacon_blink(struct scsi_qla_host *vha) 1694 { 1695 uint16_t led_color = 0; 1696 uint32_t gpio_data; 1697 unsigned long flags; 1698 struct qla_hw_data *ha = vha->hw; 1699 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; 1700 1701 /* Save the Original GPIOD. */ 1702 spin_lock_irqsave(&ha->hardware_lock, flags); 1703 gpio_data = RD_REG_DWORD(®->gpiod); 1704 1705 /* Enable the gpio_data reg for update. */ 1706 gpio_data |= GPDX_LED_UPDATE_MASK; 1707 1708 WRT_REG_DWORD(®->gpiod, gpio_data); 1709 gpio_data = RD_REG_DWORD(®->gpiod); 1710 1711 /* Set the color bits. */ 1712 qla24xx_flip_colors(ha, &led_color); 1713 1714 /* Clear out any previously set LED color. */ 1715 gpio_data &= ~GPDX_LED_COLOR_MASK; 1716 1717 /* Set the new input LED color to GPIOD. */ 1718 gpio_data |= led_color; 1719 1720 /* Set the modified gpio_data values. */ 1721 WRT_REG_DWORD(®->gpiod, gpio_data); 1722 gpio_data = RD_REG_DWORD(®->gpiod); 1723 spin_unlock_irqrestore(&ha->hardware_lock, flags); 1724 } 1725 1726 static uint32_t 1727 qla83xx_select_led_port(struct qla_hw_data *ha) 1728 { 1729 uint32_t led_select_value = 0; 1730 1731 if (!IS_QLA83XX(ha) && !IS_QLA27XX(ha)) 1732 goto out; 1733 1734 if (ha->port_no == 0) 1735 led_select_value = QLA83XX_LED_PORT0; 1736 else 1737 led_select_value = QLA83XX_LED_PORT1; 1738 1739 out: 1740 return led_select_value; 1741 } 1742 1743 void 1744 qla83xx_beacon_blink(struct scsi_qla_host *vha) 1745 { 1746 uint32_t led_select_value; 1747 struct qla_hw_data *ha = vha->hw; 1748 uint16_t led_cfg[6]; 1749 uint16_t orig_led_cfg[6]; 1750 uint32_t led_10_value, led_43_value; 1751 1752 if (!IS_QLA83XX(ha) && !IS_QLA81XX(ha) && !IS_QLA27XX(ha)) 1753 return; 1754 1755 if (!ha->beacon_blink_led) 1756 return; 1757 1758 if (IS_QLA27XX(ha)) { 1759 qla2x00_write_ram_word(vha, 0x1003, 0x40000230); 1760 qla2x00_write_ram_word(vha, 0x1004, 0x40000230); 1761 } else if (IS_QLA2031(ha)) { 1762 led_select_value = qla83xx_select_led_port(ha); 1763 1764 qla83xx_wr_reg(vha, led_select_value, 0x40000230); 1765 qla83xx_wr_reg(vha, led_select_value + 4, 0x40000230); 1766 } else if (IS_QLA8031(ha)) { 1767 led_select_value = qla83xx_select_led_port(ha); 1768 1769 qla83xx_rd_reg(vha, led_select_value, &led_10_value); 1770 qla83xx_rd_reg(vha, led_select_value + 0x10, &led_43_value); 1771 qla83xx_wr_reg(vha, led_select_value, 0x01f44000); 1772 msleep(500); 1773 qla83xx_wr_reg(vha, led_select_value, 0x400001f4); 1774 msleep(1000); 1775 qla83xx_wr_reg(vha, led_select_value, led_10_value); 1776 qla83xx_wr_reg(vha, led_select_value + 0x10, led_43_value); 1777 } else if (IS_QLA81XX(ha)) { 1778 int rval; 1779 1780 /* Save Current */ 1781 rval = qla81xx_get_led_config(vha, orig_led_cfg); 1782 /* Do the blink */ 1783 if (rval == QLA_SUCCESS) { 1784 if (IS_QLA81XX(ha)) { 1785 led_cfg[0] = 0x4000; 1786 led_cfg[1] = 0x2000; 1787 led_cfg[2] = 0; 1788 led_cfg[3] = 0; 1789 led_cfg[4] = 0; 1790 led_cfg[5] = 0; 1791 } else { 1792 led_cfg[0] = 0x4000; 1793 led_cfg[1] = 0x4000; 1794 led_cfg[2] = 0x4000; 1795 led_cfg[3] = 0x2000; 1796 led_cfg[4] = 0; 1797 led_cfg[5] = 0x2000; 1798 } 1799 rval = qla81xx_set_led_config(vha, led_cfg); 1800 msleep(1000); 1801 if (IS_QLA81XX(ha)) { 1802 led_cfg[0] = 0x4000; 1803 led_cfg[1] = 0x2000; 1804 led_cfg[2] = 0; 1805 } else { 1806 led_cfg[0] = 0x4000; 1807 led_cfg[1] = 0x2000; 1808 led_cfg[2] = 0x4000; 1809 led_cfg[3] = 0x4000; 1810 led_cfg[4] = 0; 1811 led_cfg[5] = 0x2000; 1812 } 1813 rval = qla81xx_set_led_config(vha, led_cfg); 1814 } 1815 /* On exit, restore original (presumes no status change) */ 1816 qla81xx_set_led_config(vha, orig_led_cfg); 1817 } 1818 } 1819 1820 int 1821 qla24xx_beacon_on(struct scsi_qla_host *vha) 1822 { 1823 uint32_t gpio_data; 1824 unsigned long flags; 1825 struct qla_hw_data *ha = vha->hw; 1826 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; 1827 1828 if (IS_P3P_TYPE(ha)) 1829 return QLA_SUCCESS; 1830 1831 if (IS_QLA8031(ha) || IS_QLA81XX(ha)) 1832 goto skip_gpio; /* let blink handle it */ 1833 1834 if (ha->beacon_blink_led == 0) { 1835 /* Enable firmware for update */ 1836 ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL; 1837 1838 if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) 1839 return QLA_FUNCTION_FAILED; 1840 1841 if (qla2x00_get_fw_options(vha, ha->fw_options) != 1842 QLA_SUCCESS) { 1843 ql_log(ql_log_warn, vha, 0x7009, 1844 "Unable to update fw options (beacon on).\n"); 1845 return QLA_FUNCTION_FAILED; 1846 } 1847 1848 if (IS_QLA2031(ha) || IS_QLA27XX(ha)) 1849 goto skip_gpio; 1850 1851 spin_lock_irqsave(&ha->hardware_lock, flags); 1852 gpio_data = RD_REG_DWORD(®->gpiod); 1853 1854 /* Enable the gpio_data reg for update. */ 1855 gpio_data |= GPDX_LED_UPDATE_MASK; 1856 WRT_REG_DWORD(®->gpiod, gpio_data); 1857 RD_REG_DWORD(®->gpiod); 1858 1859 spin_unlock_irqrestore(&ha->hardware_lock, flags); 1860 } 1861 1862 /* So all colors blink together. */ 1863 ha->beacon_color_state = 0; 1864 1865 skip_gpio: 1866 /* Let the per HBA timer kick off the blinking process. */ 1867 ha->beacon_blink_led = 1; 1868 1869 return QLA_SUCCESS; 1870 } 1871 1872 int 1873 qla24xx_beacon_off(struct scsi_qla_host *vha) 1874 { 1875 uint32_t gpio_data; 1876 unsigned long flags; 1877 struct qla_hw_data *ha = vha->hw; 1878 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; 1879 1880 if (IS_P3P_TYPE(ha)) 1881 return QLA_SUCCESS; 1882 1883 if (!ha->flags.fw_started) 1884 return QLA_SUCCESS; 1885 1886 ha->beacon_blink_led = 0; 1887 1888 if (IS_QLA2031(ha) || IS_QLA27XX(ha)) 1889 goto set_fw_options; 1890 1891 if (IS_QLA8031(ha) || IS_QLA81XX(ha)) 1892 return QLA_SUCCESS; 1893 1894 ha->beacon_color_state = QLA_LED_ALL_ON; 1895 1896 ha->isp_ops->beacon_blink(vha); /* Will flip to all off. */ 1897 1898 /* Give control back to firmware. */ 1899 spin_lock_irqsave(&ha->hardware_lock, flags); 1900 gpio_data = RD_REG_DWORD(®->gpiod); 1901 1902 /* Disable the gpio_data reg for update. */ 1903 gpio_data &= ~GPDX_LED_UPDATE_MASK; 1904 WRT_REG_DWORD(®->gpiod, gpio_data); 1905 RD_REG_DWORD(®->gpiod); 1906 spin_unlock_irqrestore(&ha->hardware_lock, flags); 1907 1908 set_fw_options: 1909 ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL; 1910 1911 if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) { 1912 ql_log(ql_log_warn, vha, 0x704d, 1913 "Unable to update fw options (beacon on).\n"); 1914 return QLA_FUNCTION_FAILED; 1915 } 1916 1917 if (qla2x00_get_fw_options(vha, ha->fw_options) != QLA_SUCCESS) { 1918 ql_log(ql_log_warn, vha, 0x704e, 1919 "Unable to update fw options (beacon on).\n"); 1920 return QLA_FUNCTION_FAILED; 1921 } 1922 1923 return QLA_SUCCESS; 1924 } 1925 1926 1927 /* 1928 * Flash support routines 1929 */ 1930 1931 /** 1932 * qla2x00_flash_enable() - Setup flash for reading and writing. 1933 * @ha: HA context 1934 */ 1935 static void 1936 qla2x00_flash_enable(struct qla_hw_data *ha) 1937 { 1938 uint16_t data; 1939 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 1940 1941 data = RD_REG_WORD(®->ctrl_status); 1942 data |= CSR_FLASH_ENABLE; 1943 WRT_REG_WORD(®->ctrl_status, data); 1944 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 1945 } 1946 1947 /** 1948 * qla2x00_flash_disable() - Disable flash and allow RISC to run. 1949 * @ha: HA context 1950 */ 1951 static void 1952 qla2x00_flash_disable(struct qla_hw_data *ha) 1953 { 1954 uint16_t data; 1955 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 1956 1957 data = RD_REG_WORD(®->ctrl_status); 1958 data &= ~(CSR_FLASH_ENABLE); 1959 WRT_REG_WORD(®->ctrl_status, data); 1960 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 1961 } 1962 1963 /** 1964 * qla2x00_read_flash_byte() - Reads a byte from flash 1965 * @ha: HA context 1966 * @addr: Address in flash to read 1967 * 1968 * A word is read from the chip, but, only the lower byte is valid. 1969 * 1970 * Returns the byte read from flash @addr. 1971 */ 1972 static uint8_t 1973 qla2x00_read_flash_byte(struct qla_hw_data *ha, uint32_t addr) 1974 { 1975 uint16_t data; 1976 uint16_t bank_select; 1977 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 1978 1979 bank_select = RD_REG_WORD(®->ctrl_status); 1980 1981 if (IS_QLA2322(ha) || IS_QLA6322(ha)) { 1982 /* Specify 64K address range: */ 1983 /* clear out Module Select and Flash Address bits [19:16]. */ 1984 bank_select &= ~0xf8; 1985 bank_select |= addr >> 12 & 0xf0; 1986 bank_select |= CSR_FLASH_64K_BANK; 1987 WRT_REG_WORD(®->ctrl_status, bank_select); 1988 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 1989 1990 WRT_REG_WORD(®->flash_address, (uint16_t)addr); 1991 data = RD_REG_WORD(®->flash_data); 1992 1993 return (uint8_t)data; 1994 } 1995 1996 /* Setup bit 16 of flash address. */ 1997 if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) { 1998 bank_select |= CSR_FLASH_64K_BANK; 1999 WRT_REG_WORD(®->ctrl_status, bank_select); 2000 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 2001 } else if (((addr & BIT_16) == 0) && 2002 (bank_select & CSR_FLASH_64K_BANK)) { 2003 bank_select &= ~(CSR_FLASH_64K_BANK); 2004 WRT_REG_WORD(®->ctrl_status, bank_select); 2005 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 2006 } 2007 2008 /* Always perform IO mapped accesses to the FLASH registers. */ 2009 if (ha->pio_address) { 2010 uint16_t data2; 2011 2012 WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr); 2013 do { 2014 data = RD_REG_WORD_PIO(PIO_REG(ha, flash_data)); 2015 barrier(); 2016 cpu_relax(); 2017 data2 = RD_REG_WORD_PIO(PIO_REG(ha, flash_data)); 2018 } while (data != data2); 2019 } else { 2020 WRT_REG_WORD(®->flash_address, (uint16_t)addr); 2021 data = qla2x00_debounce_register(®->flash_data); 2022 } 2023 2024 return (uint8_t)data; 2025 } 2026 2027 /** 2028 * qla2x00_write_flash_byte() - Write a byte to flash 2029 * @ha: HA context 2030 * @addr: Address in flash to write 2031 * @data: Data to write 2032 */ 2033 static void 2034 qla2x00_write_flash_byte(struct qla_hw_data *ha, uint32_t addr, uint8_t data) 2035 { 2036 uint16_t bank_select; 2037 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 2038 2039 bank_select = RD_REG_WORD(®->ctrl_status); 2040 if (IS_QLA2322(ha) || IS_QLA6322(ha)) { 2041 /* Specify 64K address range: */ 2042 /* clear out Module Select and Flash Address bits [19:16]. */ 2043 bank_select &= ~0xf8; 2044 bank_select |= addr >> 12 & 0xf0; 2045 bank_select |= CSR_FLASH_64K_BANK; 2046 WRT_REG_WORD(®->ctrl_status, bank_select); 2047 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 2048 2049 WRT_REG_WORD(®->flash_address, (uint16_t)addr); 2050 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 2051 WRT_REG_WORD(®->flash_data, (uint16_t)data); 2052 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 2053 2054 return; 2055 } 2056 2057 /* Setup bit 16 of flash address. */ 2058 if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) { 2059 bank_select |= CSR_FLASH_64K_BANK; 2060 WRT_REG_WORD(®->ctrl_status, bank_select); 2061 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 2062 } else if (((addr & BIT_16) == 0) && 2063 (bank_select & CSR_FLASH_64K_BANK)) { 2064 bank_select &= ~(CSR_FLASH_64K_BANK); 2065 WRT_REG_WORD(®->ctrl_status, bank_select); 2066 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 2067 } 2068 2069 /* Always perform IO mapped accesses to the FLASH registers. */ 2070 if (ha->pio_address) { 2071 WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr); 2072 WRT_REG_WORD_PIO(PIO_REG(ha, flash_data), (uint16_t)data); 2073 } else { 2074 WRT_REG_WORD(®->flash_address, (uint16_t)addr); 2075 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 2076 WRT_REG_WORD(®->flash_data, (uint16_t)data); 2077 RD_REG_WORD(®->ctrl_status); /* PCI Posting. */ 2078 } 2079 } 2080 2081 /** 2082 * qla2x00_poll_flash() - Polls flash for completion. 2083 * @ha: HA context 2084 * @addr: Address in flash to poll 2085 * @poll_data: Data to be polled 2086 * @man_id: Flash manufacturer ID 2087 * @flash_id: Flash ID 2088 * 2089 * This function polls the device until bit 7 of what is read matches data 2090 * bit 7 or until data bit 5 becomes a 1. If that hapens, the flash ROM timed 2091 * out (a fatal error). The flash book recommeds reading bit 7 again after 2092 * reading bit 5 as a 1. 2093 * 2094 * Returns 0 on success, else non-zero. 2095 */ 2096 static int 2097 qla2x00_poll_flash(struct qla_hw_data *ha, uint32_t addr, uint8_t poll_data, 2098 uint8_t man_id, uint8_t flash_id) 2099 { 2100 int status; 2101 uint8_t flash_data; 2102 uint32_t cnt; 2103 2104 status = 1; 2105 2106 /* Wait for 30 seconds for command to finish. */ 2107 poll_data &= BIT_7; 2108 for (cnt = 3000000; cnt; cnt--) { 2109 flash_data = qla2x00_read_flash_byte(ha, addr); 2110 if ((flash_data & BIT_7) == poll_data) { 2111 status = 0; 2112 break; 2113 } 2114 2115 if (man_id != 0x40 && man_id != 0xda) { 2116 if ((flash_data & BIT_5) && cnt > 2) 2117 cnt = 2; 2118 } 2119 udelay(10); 2120 barrier(); 2121 cond_resched(); 2122 } 2123 return status; 2124 } 2125 2126 /** 2127 * qla2x00_program_flash_address() - Programs a flash address 2128 * @ha: HA context 2129 * @addr: Address in flash to program 2130 * @data: Data to be written in flash 2131 * @man_id: Flash manufacturer ID 2132 * @flash_id: Flash ID 2133 * 2134 * Returns 0 on success, else non-zero. 2135 */ 2136 static int 2137 qla2x00_program_flash_address(struct qla_hw_data *ha, uint32_t addr, 2138 uint8_t data, uint8_t man_id, uint8_t flash_id) 2139 { 2140 /* Write Program Command Sequence. */ 2141 if (IS_OEM_001(ha)) { 2142 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); 2143 qla2x00_write_flash_byte(ha, 0x555, 0x55); 2144 qla2x00_write_flash_byte(ha, 0xaaa, 0xa0); 2145 qla2x00_write_flash_byte(ha, addr, data); 2146 } else { 2147 if (man_id == 0xda && flash_id == 0xc1) { 2148 qla2x00_write_flash_byte(ha, addr, data); 2149 if (addr & 0x7e) 2150 return 0; 2151 } else { 2152 qla2x00_write_flash_byte(ha, 0x5555, 0xaa); 2153 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); 2154 qla2x00_write_flash_byte(ha, 0x5555, 0xa0); 2155 qla2x00_write_flash_byte(ha, addr, data); 2156 } 2157 } 2158 2159 udelay(150); 2160 2161 /* Wait for write to complete. */ 2162 return qla2x00_poll_flash(ha, addr, data, man_id, flash_id); 2163 } 2164 2165 /** 2166 * qla2x00_erase_flash() - Erase the flash. 2167 * @ha: HA context 2168 * @man_id: Flash manufacturer ID 2169 * @flash_id: Flash ID 2170 * 2171 * Returns 0 on success, else non-zero. 2172 */ 2173 static int 2174 qla2x00_erase_flash(struct qla_hw_data *ha, uint8_t man_id, uint8_t flash_id) 2175 { 2176 /* Individual Sector Erase Command Sequence */ 2177 if (IS_OEM_001(ha)) { 2178 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); 2179 qla2x00_write_flash_byte(ha, 0x555, 0x55); 2180 qla2x00_write_flash_byte(ha, 0xaaa, 0x80); 2181 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa); 2182 qla2x00_write_flash_byte(ha, 0x555, 0x55); 2183 qla2x00_write_flash_byte(ha, 0xaaa, 0x10); 2184 } else { 2185 qla2x00_write_flash_byte(ha, 0x5555, 0xaa); 2186 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); 2187 qla2x00_write_flash_byte(ha, 0x5555, 0x80); 2188 qla2x00_write_flash_byte(ha, 0x5555, 0xaa); 2189 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); 2190 qla2x00_write_flash_byte(ha, 0x5555, 0x10); 2191 } 2192 2193 udelay(150); 2194 2195 /* Wait for erase to complete. */ 2196 return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id); 2197 } 2198 2199 /** 2200 * qla2x00_erase_flash_sector() - Erase a flash sector. 2201 * @ha: HA context 2202 * @addr: Flash sector to erase 2203 * @sec_mask: Sector address mask 2204 * @man_id: Flash manufacturer ID 2205 * @flash_id: Flash ID 2206 * 2207 * Returns 0 on success, else non-zero. 2208 */ 2209 static int 2210 qla2x00_erase_flash_sector(struct qla_hw_data *ha, uint32_t addr, 2211 uint32_t sec_mask, uint8_t man_id, uint8_t flash_id) 2212 { 2213 /* Individual Sector Erase Command Sequence */ 2214 qla2x00_write_flash_byte(ha, 0x5555, 0xaa); 2215 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); 2216 qla2x00_write_flash_byte(ha, 0x5555, 0x80); 2217 qla2x00_write_flash_byte(ha, 0x5555, 0xaa); 2218 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); 2219 if (man_id == 0x1f && flash_id == 0x13) 2220 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10); 2221 else 2222 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30); 2223 2224 udelay(150); 2225 2226 /* Wait for erase to complete. */ 2227 return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id); 2228 } 2229 2230 /** 2231 * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip. 2232 * @ha: host adapter 2233 * @man_id: Flash manufacturer ID 2234 * @flash_id: Flash ID 2235 */ 2236 static void 2237 qla2x00_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id, 2238 uint8_t *flash_id) 2239 { 2240 qla2x00_write_flash_byte(ha, 0x5555, 0xaa); 2241 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); 2242 qla2x00_write_flash_byte(ha, 0x5555, 0x90); 2243 *man_id = qla2x00_read_flash_byte(ha, 0x0000); 2244 *flash_id = qla2x00_read_flash_byte(ha, 0x0001); 2245 qla2x00_write_flash_byte(ha, 0x5555, 0xaa); 2246 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55); 2247 qla2x00_write_flash_byte(ha, 0x5555, 0xf0); 2248 } 2249 2250 static void 2251 qla2x00_read_flash_data(struct qla_hw_data *ha, uint8_t *tmp_buf, 2252 uint32_t saddr, uint32_t length) 2253 { 2254 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 2255 uint32_t midpoint, ilength; 2256 uint8_t data; 2257 2258 midpoint = length / 2; 2259 2260 WRT_REG_WORD(®->nvram, 0); 2261 RD_REG_WORD(®->nvram); 2262 for (ilength = 0; ilength < length; saddr++, ilength++, tmp_buf++) { 2263 if (ilength == midpoint) { 2264 WRT_REG_WORD(®->nvram, NVR_SELECT); 2265 RD_REG_WORD(®->nvram); 2266 } 2267 data = qla2x00_read_flash_byte(ha, saddr); 2268 if (saddr % 100) 2269 udelay(10); 2270 *tmp_buf = data; 2271 cond_resched(); 2272 } 2273 } 2274 2275 static inline void 2276 qla2x00_suspend_hba(struct scsi_qla_host *vha) 2277 { 2278 int cnt; 2279 unsigned long flags; 2280 struct qla_hw_data *ha = vha->hw; 2281 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 2282 2283 /* Suspend HBA. */ 2284 scsi_block_requests(vha->host); 2285 ha->isp_ops->disable_intrs(ha); 2286 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); 2287 2288 /* Pause RISC. */ 2289 spin_lock_irqsave(&ha->hardware_lock, flags); 2290 WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); 2291 RD_REG_WORD(®->hccr); 2292 if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) { 2293 for (cnt = 0; cnt < 30000; cnt++) { 2294 if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) != 0) 2295 break; 2296 udelay(100); 2297 } 2298 } else { 2299 udelay(10); 2300 } 2301 spin_unlock_irqrestore(&ha->hardware_lock, flags); 2302 } 2303 2304 static inline void 2305 qla2x00_resume_hba(struct scsi_qla_host *vha) 2306 { 2307 struct qla_hw_data *ha = vha->hw; 2308 2309 /* Resume HBA. */ 2310 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); 2311 set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); 2312 qla2xxx_wake_dpc(vha); 2313 qla2x00_wait_for_chip_reset(vha); 2314 scsi_unblock_requests(vha->host); 2315 } 2316 2317 uint8_t * 2318 qla2x00_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, 2319 uint32_t offset, uint32_t length) 2320 { 2321 uint32_t addr, midpoint; 2322 uint8_t *data; 2323 struct qla_hw_data *ha = vha->hw; 2324 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 2325 2326 /* Suspend HBA. */ 2327 qla2x00_suspend_hba(vha); 2328 2329 /* Go with read. */ 2330 midpoint = ha->optrom_size / 2; 2331 2332 qla2x00_flash_enable(ha); 2333 WRT_REG_WORD(®->nvram, 0); 2334 RD_REG_WORD(®->nvram); /* PCI Posting. */ 2335 for (addr = offset, data = buf; addr < length; addr++, data++) { 2336 if (addr == midpoint) { 2337 WRT_REG_WORD(®->nvram, NVR_SELECT); 2338 RD_REG_WORD(®->nvram); /* PCI Posting. */ 2339 } 2340 2341 *data = qla2x00_read_flash_byte(ha, addr); 2342 } 2343 qla2x00_flash_disable(ha); 2344 2345 /* Resume HBA. */ 2346 qla2x00_resume_hba(vha); 2347 2348 return buf; 2349 } 2350 2351 int 2352 qla2x00_write_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, 2353 uint32_t offset, uint32_t length) 2354 { 2355 2356 int rval; 2357 uint8_t man_id, flash_id, sec_number, data; 2358 uint16_t wd; 2359 uint32_t addr, liter, sec_mask, rest_addr; 2360 struct qla_hw_data *ha = vha->hw; 2361 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; 2362 2363 /* Suspend HBA. */ 2364 qla2x00_suspend_hba(vha); 2365 2366 rval = QLA_SUCCESS; 2367 sec_number = 0; 2368 2369 /* Reset ISP chip. */ 2370 WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET); 2371 pci_read_config_word(ha->pdev, PCI_COMMAND, &wd); 2372 2373 /* Go with write. */ 2374 qla2x00_flash_enable(ha); 2375 do { /* Loop once to provide quick error exit */ 2376 /* Structure of flash memory based on manufacturer */ 2377 if (IS_OEM_001(ha)) { 2378 /* OEM variant with special flash part. */ 2379 man_id = flash_id = 0; 2380 rest_addr = 0xffff; 2381 sec_mask = 0x10000; 2382 goto update_flash; 2383 } 2384 qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id); 2385 switch (man_id) { 2386 case 0x20: /* ST flash. */ 2387 if (flash_id == 0xd2 || flash_id == 0xe3) { 2388 /* 2389 * ST m29w008at part - 64kb sector size with 2390 * 32kb,8kb,8kb,16kb sectors at memory address 2391 * 0xf0000. 2392 */ 2393 rest_addr = 0xffff; 2394 sec_mask = 0x10000; 2395 break; 2396 } 2397 /* 2398 * ST m29w010b part - 16kb sector size 2399 * Default to 16kb sectors 2400 */ 2401 rest_addr = 0x3fff; 2402 sec_mask = 0x1c000; 2403 break; 2404 case 0x40: /* Mostel flash. */ 2405 /* Mostel v29c51001 part - 512 byte sector size. */ 2406 rest_addr = 0x1ff; 2407 sec_mask = 0x1fe00; 2408 break; 2409 case 0xbf: /* SST flash. */ 2410 /* SST39sf10 part - 4kb sector size. */ 2411 rest_addr = 0xfff; 2412 sec_mask = 0x1f000; 2413 break; 2414 case 0xda: /* Winbond flash. */ 2415 /* Winbond W29EE011 part - 256 byte sector size. */ 2416 rest_addr = 0x7f; 2417 sec_mask = 0x1ff80; 2418 break; 2419 case 0xc2: /* Macronix flash. */ 2420 /* 64k sector size. */ 2421 if (flash_id == 0x38 || flash_id == 0x4f) { 2422 rest_addr = 0xffff; 2423 sec_mask = 0x10000; 2424 break; 2425 } 2426 /* Fall through... */ 2427 2428 case 0x1f: /* Atmel flash. */ 2429 /* 512k sector size. */ 2430 if (flash_id == 0x13) { 2431 rest_addr = 0x7fffffff; 2432 sec_mask = 0x80000000; 2433 break; 2434 } 2435 /* Fall through... */ 2436 2437 case 0x01: /* AMD flash. */ 2438 if (flash_id == 0x38 || flash_id == 0x40 || 2439 flash_id == 0x4f) { 2440 /* Am29LV081 part - 64kb sector size. */ 2441 /* Am29LV002BT part - 64kb sector size. */ 2442 rest_addr = 0xffff; 2443 sec_mask = 0x10000; 2444 break; 2445 } else if (flash_id == 0x3e) { 2446 /* 2447 * Am29LV008b part - 64kb sector size with 2448 * 32kb,8kb,8kb,16kb sector at memory address 2449 * h0xf0000. 2450 */ 2451 rest_addr = 0xffff; 2452 sec_mask = 0x10000; 2453 break; 2454 } else if (flash_id == 0x20 || flash_id == 0x6e) { 2455 /* 2456 * Am29LV010 part or AM29f010 - 16kb sector 2457 * size. 2458 */ 2459 rest_addr = 0x3fff; 2460 sec_mask = 0x1c000; 2461 break; 2462 } else if (flash_id == 0x6d) { 2463 /* Am29LV001 part - 8kb sector size. */ 2464 rest_addr = 0x1fff; 2465 sec_mask = 0x1e000; 2466 break; 2467 } 2468 /* fall through */ 2469 default: 2470 /* Default to 16 kb sector size. */ 2471 rest_addr = 0x3fff; 2472 sec_mask = 0x1c000; 2473 break; 2474 } 2475 2476 update_flash: 2477 if (IS_QLA2322(ha) || IS_QLA6322(ha)) { 2478 if (qla2x00_erase_flash(ha, man_id, flash_id)) { 2479 rval = QLA_FUNCTION_FAILED; 2480 break; 2481 } 2482 } 2483 2484 for (addr = offset, liter = 0; liter < length; liter++, 2485 addr++) { 2486 data = buf[liter]; 2487 /* Are we at the beginning of a sector? */ 2488 if ((addr & rest_addr) == 0) { 2489 if (IS_QLA2322(ha) || IS_QLA6322(ha)) { 2490 if (addr >= 0x10000UL) { 2491 if (((addr >> 12) & 0xf0) && 2492 ((man_id == 0x01 && 2493 flash_id == 0x3e) || 2494 (man_id == 0x20 && 2495 flash_id == 0xd2))) { 2496 sec_number++; 2497 if (sec_number == 1) { 2498 rest_addr = 2499 0x7fff; 2500 sec_mask = 2501 0x18000; 2502 } else if ( 2503 sec_number == 2 || 2504 sec_number == 3) { 2505 rest_addr = 2506 0x1fff; 2507 sec_mask = 2508 0x1e000; 2509 } else if ( 2510 sec_number == 4) { 2511 rest_addr = 2512 0x3fff; 2513 sec_mask = 2514 0x1c000; 2515 } 2516 } 2517 } 2518 } else if (addr == ha->optrom_size / 2) { 2519 WRT_REG_WORD(®->nvram, NVR_SELECT); 2520 RD_REG_WORD(®->nvram); 2521 } 2522 2523 if (flash_id == 0xda && man_id == 0xc1) { 2524 qla2x00_write_flash_byte(ha, 0x5555, 2525 0xaa); 2526 qla2x00_write_flash_byte(ha, 0x2aaa, 2527 0x55); 2528 qla2x00_write_flash_byte(ha, 0x5555, 2529 0xa0); 2530 } else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) { 2531 /* Then erase it */ 2532 if (qla2x00_erase_flash_sector(ha, 2533 addr, sec_mask, man_id, 2534 flash_id)) { 2535 rval = QLA_FUNCTION_FAILED; 2536 break; 2537 } 2538 if (man_id == 0x01 && flash_id == 0x6d) 2539 sec_number++; 2540 } 2541 } 2542 2543 if (man_id == 0x01 && flash_id == 0x6d) { 2544 if (sec_number == 1 && 2545 addr == (rest_addr - 1)) { 2546 rest_addr = 0x0fff; 2547 sec_mask = 0x1f000; 2548 } else if (sec_number == 3 && (addr & 0x7ffe)) { 2549 rest_addr = 0x3fff; 2550 sec_mask = 0x1c000; 2551 } 2552 } 2553 2554 if (qla2x00_program_flash_address(ha, addr, data, 2555 man_id, flash_id)) { 2556 rval = QLA_FUNCTION_FAILED; 2557 break; 2558 } 2559 cond_resched(); 2560 } 2561 } while (0); 2562 qla2x00_flash_disable(ha); 2563 2564 /* Resume HBA. */ 2565 qla2x00_resume_hba(vha); 2566 2567 return rval; 2568 } 2569 2570 uint8_t * 2571 qla24xx_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, 2572 uint32_t offset, uint32_t length) 2573 { 2574 struct qla_hw_data *ha = vha->hw; 2575 2576 /* Suspend HBA. */ 2577 scsi_block_requests(vha->host); 2578 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); 2579 2580 /* Go with read. */ 2581 qla24xx_read_flash_data(vha, (uint32_t *)buf, offset >> 2, length >> 2); 2582 2583 /* Resume HBA. */ 2584 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); 2585 scsi_unblock_requests(vha->host); 2586 2587 return buf; 2588 } 2589 2590 int 2591 qla24xx_write_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, 2592 uint32_t offset, uint32_t length) 2593 { 2594 int rval; 2595 struct qla_hw_data *ha = vha->hw; 2596 2597 /* Suspend HBA. */ 2598 scsi_block_requests(vha->host); 2599 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); 2600 2601 /* Go with write. */ 2602 rval = qla24xx_write_flash_data(vha, (uint32_t *)buf, offset >> 2, 2603 length >> 2); 2604 2605 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags); 2606 scsi_unblock_requests(vha->host); 2607 2608 return rval; 2609 } 2610 2611 uint8_t * 2612 qla25xx_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, 2613 uint32_t offset, uint32_t length) 2614 { 2615 int rval; 2616 dma_addr_t optrom_dma; 2617 void *optrom; 2618 uint8_t *pbuf; 2619 uint32_t faddr, left, burst; 2620 struct qla_hw_data *ha = vha->hw; 2621 2622 if (IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) || 2623 IS_QLA27XX(ha)) 2624 goto try_fast; 2625 if (offset & 0xfff) 2626 goto slow_read; 2627 if (length < OPTROM_BURST_SIZE) 2628 goto slow_read; 2629 2630 try_fast: 2631 optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, 2632 &optrom_dma, GFP_KERNEL); 2633 if (!optrom) { 2634 ql_log(ql_log_warn, vha, 0x00cc, 2635 "Unable to allocate memory for optrom burst read (%x KB).\n", 2636 OPTROM_BURST_SIZE / 1024); 2637 goto slow_read; 2638 } 2639 2640 pbuf = buf; 2641 faddr = offset >> 2; 2642 left = length >> 2; 2643 burst = OPTROM_BURST_DWORDS; 2644 while (left != 0) { 2645 if (burst > left) 2646 burst = left; 2647 2648 rval = qla2x00_dump_ram(vha, optrom_dma, 2649 flash_data_addr(ha, faddr), burst); 2650 if (rval) { 2651 ql_log(ql_log_warn, vha, 0x00f5, 2652 "Unable to burst-read optrom segment (%x/%x/%llx).\n", 2653 rval, flash_data_addr(ha, faddr), 2654 (unsigned long long)optrom_dma); 2655 ql_log(ql_log_warn, vha, 0x00f6, 2656 "Reverting to slow-read.\n"); 2657 2658 dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, 2659 optrom, optrom_dma); 2660 goto slow_read; 2661 } 2662 2663 memcpy(pbuf, optrom, burst * 4); 2664 2665 left -= burst; 2666 faddr += burst; 2667 pbuf += burst * 4; 2668 } 2669 2670 dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, optrom, 2671 optrom_dma); 2672 2673 return buf; 2674 2675 slow_read: 2676 return qla24xx_read_optrom_data(vha, buf, offset, length); 2677 } 2678 2679 /** 2680 * qla2x00_get_fcode_version() - Determine an FCODE image's version. 2681 * @ha: HA context 2682 * @pcids: Pointer to the FCODE PCI data structure 2683 * 2684 * The process of retrieving the FCODE version information is at best 2685 * described as interesting. 2686 * 2687 * Within the first 100h bytes of the image an ASCII string is present 2688 * which contains several pieces of information including the FCODE 2689 * version. Unfortunately it seems the only reliable way to retrieve 2690 * the version is by scanning for another sentinel within the string, 2691 * the FCODE build date: 2692 * 2693 * ... 2.00.02 10/17/02 ... 2694 * 2695 * Returns QLA_SUCCESS on successful retrieval of version. 2696 */ 2697 static void 2698 qla2x00_get_fcode_version(struct qla_hw_data *ha, uint32_t pcids) 2699 { 2700 int ret = QLA_FUNCTION_FAILED; 2701 uint32_t istart, iend, iter, vend; 2702 uint8_t do_next, rbyte, *vbyte; 2703 2704 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision)); 2705 2706 /* Skip the PCI data structure. */ 2707 istart = pcids + 2708 ((qla2x00_read_flash_byte(ha, pcids + 0x0B) << 8) | 2709 qla2x00_read_flash_byte(ha, pcids + 0x0A)); 2710 iend = istart + 0x100; 2711 do { 2712 /* Scan for the sentinel date string...eeewww. */ 2713 do_next = 0; 2714 iter = istart; 2715 while ((iter < iend) && !do_next) { 2716 iter++; 2717 if (qla2x00_read_flash_byte(ha, iter) == '/') { 2718 if (qla2x00_read_flash_byte(ha, iter + 2) == 2719 '/') 2720 do_next++; 2721 else if (qla2x00_read_flash_byte(ha, 2722 iter + 3) == '/') 2723 do_next++; 2724 } 2725 } 2726 if (!do_next) 2727 break; 2728 2729 /* Backtrack to previous ' ' (space). */ 2730 do_next = 0; 2731 while ((iter > istart) && !do_next) { 2732 iter--; 2733 if (qla2x00_read_flash_byte(ha, iter) == ' ') 2734 do_next++; 2735 } 2736 if (!do_next) 2737 break; 2738 2739 /* 2740 * Mark end of version tag, and find previous ' ' (space) or 2741 * string length (recent FCODE images -- major hack ahead!!!). 2742 */ 2743 vend = iter - 1; 2744 do_next = 0; 2745 while ((iter > istart) && !do_next) { 2746 iter--; 2747 rbyte = qla2x00_read_flash_byte(ha, iter); 2748 if (rbyte == ' ' || rbyte == 0xd || rbyte == 0x10) 2749 do_next++; 2750 } 2751 if (!do_next) 2752 break; 2753 2754 /* Mark beginning of version tag, and copy data. */ 2755 iter++; 2756 if ((vend - iter) && 2757 ((vend - iter) < sizeof(ha->fcode_revision))) { 2758 vbyte = ha->fcode_revision; 2759 while (iter <= vend) { 2760 *vbyte++ = qla2x00_read_flash_byte(ha, iter); 2761 iter++; 2762 } 2763 ret = QLA_SUCCESS; 2764 } 2765 } while (0); 2766 2767 if (ret != QLA_SUCCESS) 2768 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision)); 2769 } 2770 2771 int 2772 qla2x00_get_flash_version(scsi_qla_host_t *vha, void *mbuf) 2773 { 2774 int ret = QLA_SUCCESS; 2775 uint8_t code_type, last_image; 2776 uint32_t pcihdr, pcids; 2777 uint8_t *dbyte; 2778 uint16_t *dcode; 2779 struct qla_hw_data *ha = vha->hw; 2780 2781 if (!ha->pio_address || !mbuf) 2782 return QLA_FUNCTION_FAILED; 2783 2784 memset(ha->bios_revision, 0, sizeof(ha->bios_revision)); 2785 memset(ha->efi_revision, 0, sizeof(ha->efi_revision)); 2786 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision)); 2787 memset(ha->fw_revision, 0, sizeof(ha->fw_revision)); 2788 2789 qla2x00_flash_enable(ha); 2790 2791 /* Begin with first PCI expansion ROM header. */ 2792 pcihdr = 0; 2793 last_image = 1; 2794 do { 2795 /* Verify PCI expansion ROM header. */ 2796 if (qla2x00_read_flash_byte(ha, pcihdr) != 0x55 || 2797 qla2x00_read_flash_byte(ha, pcihdr + 0x01) != 0xaa) { 2798 /* No signature */ 2799 ql_log(ql_log_fatal, vha, 0x0050, 2800 "No matching ROM signature.\n"); 2801 ret = QLA_FUNCTION_FAILED; 2802 break; 2803 } 2804 2805 /* Locate PCI data structure. */ 2806 pcids = pcihdr + 2807 ((qla2x00_read_flash_byte(ha, pcihdr + 0x19) << 8) | 2808 qla2x00_read_flash_byte(ha, pcihdr + 0x18)); 2809 2810 /* Validate signature of PCI data structure. */ 2811 if (qla2x00_read_flash_byte(ha, pcids) != 'P' || 2812 qla2x00_read_flash_byte(ha, pcids + 0x1) != 'C' || 2813 qla2x00_read_flash_byte(ha, pcids + 0x2) != 'I' || 2814 qla2x00_read_flash_byte(ha, pcids + 0x3) != 'R') { 2815 /* Incorrect header. */ 2816 ql_log(ql_log_fatal, vha, 0x0051, 2817 "PCI data struct not found pcir_adr=%x.\n", pcids); 2818 ret = QLA_FUNCTION_FAILED; 2819 break; 2820 } 2821 2822 /* Read version */ 2823 code_type = qla2x00_read_flash_byte(ha, pcids + 0x14); 2824 switch (code_type) { 2825 case ROM_CODE_TYPE_BIOS: 2826 /* Intel x86, PC-AT compatible. */ 2827 ha->bios_revision[0] = 2828 qla2x00_read_flash_byte(ha, pcids + 0x12); 2829 ha->bios_revision[1] = 2830 qla2x00_read_flash_byte(ha, pcids + 0x13); 2831 ql_dbg(ql_dbg_init, vha, 0x0052, 2832 "Read BIOS %d.%d.\n", 2833 ha->bios_revision[1], ha->bios_revision[0]); 2834 break; 2835 case ROM_CODE_TYPE_FCODE: 2836 /* Open Firmware standard for PCI (FCode). */ 2837 /* Eeeewww... */ 2838 qla2x00_get_fcode_version(ha, pcids); 2839 break; 2840 case ROM_CODE_TYPE_EFI: 2841 /* Extensible Firmware Interface (EFI). */ 2842 ha->efi_revision[0] = 2843 qla2x00_read_flash_byte(ha, pcids + 0x12); 2844 ha->efi_revision[1] = 2845 qla2x00_read_flash_byte(ha, pcids + 0x13); 2846 ql_dbg(ql_dbg_init, vha, 0x0053, 2847 "Read EFI %d.%d.\n", 2848 ha->efi_revision[1], ha->efi_revision[0]); 2849 break; 2850 default: 2851 ql_log(ql_log_warn, vha, 0x0054, 2852 "Unrecognized code type %x at pcids %x.\n", 2853 code_type, pcids); 2854 break; 2855 } 2856 2857 last_image = qla2x00_read_flash_byte(ha, pcids + 0x15) & BIT_7; 2858 2859 /* Locate next PCI expansion ROM. */ 2860 pcihdr += ((qla2x00_read_flash_byte(ha, pcids + 0x11) << 8) | 2861 qla2x00_read_flash_byte(ha, pcids + 0x10)) * 512; 2862 } while (!last_image); 2863 2864 if (IS_QLA2322(ha)) { 2865 /* Read firmware image information. */ 2866 memset(ha->fw_revision, 0, sizeof(ha->fw_revision)); 2867 dbyte = mbuf; 2868 memset(dbyte, 0, 8); 2869 dcode = (uint16_t *)dbyte; 2870 2871 qla2x00_read_flash_data(ha, dbyte, ha->flt_region_fw * 4 + 10, 2872 8); 2873 ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x010a, 2874 "Dumping fw " 2875 "ver from flash:.\n"); 2876 ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010b, 2877 (uint8_t *)dbyte, 8); 2878 2879 if ((dcode[0] == 0xffff && dcode[1] == 0xffff && 2880 dcode[2] == 0xffff && dcode[3] == 0xffff) || 2881 (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 && 2882 dcode[3] == 0)) { 2883 ql_log(ql_log_warn, vha, 0x0057, 2884 "Unrecognized fw revision at %x.\n", 2885 ha->flt_region_fw * 4); 2886 } else { 2887 /* values are in big endian */ 2888 ha->fw_revision[0] = dbyte[0] << 16 | dbyte[1]; 2889 ha->fw_revision[1] = dbyte[2] << 16 | dbyte[3]; 2890 ha->fw_revision[2] = dbyte[4] << 16 | dbyte[5]; 2891 ql_dbg(ql_dbg_init, vha, 0x0058, 2892 "FW Version: " 2893 "%d.%d.%d.\n", ha->fw_revision[0], 2894 ha->fw_revision[1], ha->fw_revision[2]); 2895 } 2896 } 2897 2898 qla2x00_flash_disable(ha); 2899 2900 return ret; 2901 } 2902 2903 int 2904 qla82xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf) 2905 { 2906 int ret = QLA_SUCCESS; 2907 uint32_t pcihdr, pcids; 2908 uint32_t *dcode; 2909 uint8_t *bcode; 2910 uint8_t code_type, last_image; 2911 struct qla_hw_data *ha = vha->hw; 2912 2913 if (!mbuf) 2914 return QLA_FUNCTION_FAILED; 2915 2916 memset(ha->bios_revision, 0, sizeof(ha->bios_revision)); 2917 memset(ha->efi_revision, 0, sizeof(ha->efi_revision)); 2918 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision)); 2919 memset(ha->fw_revision, 0, sizeof(ha->fw_revision)); 2920 2921 dcode = mbuf; 2922 2923 /* Begin with first PCI expansion ROM header. */ 2924 pcihdr = ha->flt_region_boot << 2; 2925 last_image = 1; 2926 do { 2927 /* Verify PCI expansion ROM header. */ 2928 ha->isp_ops->read_optrom(vha, (uint8_t *)dcode, pcihdr, 2929 0x20 * 4); 2930 bcode = mbuf + (pcihdr % 4); 2931 if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa) { 2932 /* No signature */ 2933 ql_log(ql_log_fatal, vha, 0x0154, 2934 "No matching ROM signature.\n"); 2935 ret = QLA_FUNCTION_FAILED; 2936 break; 2937 } 2938 2939 /* Locate PCI data structure. */ 2940 pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]); 2941 2942 ha->isp_ops->read_optrom(vha, (uint8_t *)dcode, pcids, 2943 0x20 * 4); 2944 bcode = mbuf + (pcihdr % 4); 2945 2946 /* Validate signature of PCI data structure. */ 2947 if (bcode[0x0] != 'P' || bcode[0x1] != 'C' || 2948 bcode[0x2] != 'I' || bcode[0x3] != 'R') { 2949 /* Incorrect header. */ 2950 ql_log(ql_log_fatal, vha, 0x0155, 2951 "PCI data struct not found pcir_adr=%x.\n", pcids); 2952 ret = QLA_FUNCTION_FAILED; 2953 break; 2954 } 2955 2956 /* Read version */ 2957 code_type = bcode[0x14]; 2958 switch (code_type) { 2959 case ROM_CODE_TYPE_BIOS: 2960 /* Intel x86, PC-AT compatible. */ 2961 ha->bios_revision[0] = bcode[0x12]; 2962 ha->bios_revision[1] = bcode[0x13]; 2963 ql_dbg(ql_dbg_init, vha, 0x0156, 2964 "Read BIOS %d.%d.\n", 2965 ha->bios_revision[1], ha->bios_revision[0]); 2966 break; 2967 case ROM_CODE_TYPE_FCODE: 2968 /* Open Firmware standard for PCI (FCode). */ 2969 ha->fcode_revision[0] = bcode[0x12]; 2970 ha->fcode_revision[1] = bcode[0x13]; 2971 ql_dbg(ql_dbg_init, vha, 0x0157, 2972 "Read FCODE %d.%d.\n", 2973 ha->fcode_revision[1], ha->fcode_revision[0]); 2974 break; 2975 case ROM_CODE_TYPE_EFI: 2976 /* Extensible Firmware Interface (EFI). */ 2977 ha->efi_revision[0] = bcode[0x12]; 2978 ha->efi_revision[1] = bcode[0x13]; 2979 ql_dbg(ql_dbg_init, vha, 0x0158, 2980 "Read EFI %d.%d.\n", 2981 ha->efi_revision[1], ha->efi_revision[0]); 2982 break; 2983 default: 2984 ql_log(ql_log_warn, vha, 0x0159, 2985 "Unrecognized code type %x at pcids %x.\n", 2986 code_type, pcids); 2987 break; 2988 } 2989 2990 last_image = bcode[0x15] & BIT_7; 2991 2992 /* Locate next PCI expansion ROM. */ 2993 pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512; 2994 } while (!last_image); 2995 2996 /* Read firmware image information. */ 2997 memset(ha->fw_revision, 0, sizeof(ha->fw_revision)); 2998 dcode = mbuf; 2999 ha->isp_ops->read_optrom(vha, (uint8_t *)dcode, ha->flt_region_fw << 2, 3000 0x20); 3001 bcode = mbuf + (pcihdr % 4); 3002 3003 /* Validate signature of PCI data structure. */ 3004 if (bcode[0x0] == 0x3 && bcode[0x1] == 0x0 && 3005 bcode[0x2] == 0x40 && bcode[0x3] == 0x40) { 3006 ha->fw_revision[0] = bcode[0x4]; 3007 ha->fw_revision[1] = bcode[0x5]; 3008 ha->fw_revision[2] = bcode[0x6]; 3009 ql_dbg(ql_dbg_init, vha, 0x0153, 3010 "Firmware revision %d.%d.%d\n", 3011 ha->fw_revision[0], ha->fw_revision[1], 3012 ha->fw_revision[2]); 3013 } 3014 3015 return ret; 3016 } 3017 3018 int 3019 qla24xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf) 3020 { 3021 int ret = QLA_SUCCESS; 3022 uint32_t pcihdr, pcids; 3023 uint32_t *dcode; 3024 uint8_t *bcode; 3025 uint8_t code_type, last_image; 3026 int i; 3027 struct qla_hw_data *ha = vha->hw; 3028 uint32_t faddr = 0; 3029 3030 pcihdr = pcids = 0; 3031 3032 if (IS_P3P_TYPE(ha)) 3033 return ret; 3034 3035 if (!mbuf) 3036 return QLA_FUNCTION_FAILED; 3037 3038 memset(ha->bios_revision, 0, sizeof(ha->bios_revision)); 3039 memset(ha->efi_revision, 0, sizeof(ha->efi_revision)); 3040 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision)); 3041 memset(ha->fw_revision, 0, sizeof(ha->fw_revision)); 3042 3043 dcode = mbuf; 3044 pcihdr = ha->flt_region_boot << 2; 3045 if (IS_QLA27XX(ha) && 3046 qla27xx_find_valid_image(vha) == QLA27XX_SECONDARY_IMAGE) 3047 pcihdr = ha->flt_region_boot_sec << 2; 3048 3049 last_image = 1; 3050 do { 3051 /* Verify PCI expansion ROM header. */ 3052 qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20); 3053 bcode = mbuf + (pcihdr % 4); 3054 if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa) { 3055 /* No signature */ 3056 ql_log(ql_log_fatal, vha, 0x0059, 3057 "No matching ROM signature.\n"); 3058 ret = QLA_FUNCTION_FAILED; 3059 break; 3060 } 3061 3062 /* Locate PCI data structure. */ 3063 pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]); 3064 3065 qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20); 3066 bcode = mbuf + (pcihdr % 4); 3067 3068 /* Validate signature of PCI data structure. */ 3069 if (bcode[0x0] != 'P' || bcode[0x1] != 'C' || 3070 bcode[0x2] != 'I' || bcode[0x3] != 'R') { 3071 /* Incorrect header. */ 3072 ql_log(ql_log_fatal, vha, 0x005a, 3073 "PCI data struct not found pcir_adr=%x.\n", pcids); 3074 ret = QLA_FUNCTION_FAILED; 3075 break; 3076 } 3077 3078 /* Read version */ 3079 code_type = bcode[0x14]; 3080 switch (code_type) { 3081 case ROM_CODE_TYPE_BIOS: 3082 /* Intel x86, PC-AT compatible. */ 3083 ha->bios_revision[0] = bcode[0x12]; 3084 ha->bios_revision[1] = bcode[0x13]; 3085 ql_dbg(ql_dbg_init, vha, 0x005b, 3086 "Read BIOS %d.%d.\n", 3087 ha->bios_revision[1], ha->bios_revision[0]); 3088 break; 3089 case ROM_CODE_TYPE_FCODE: 3090 /* Open Firmware standard for PCI (FCode). */ 3091 ha->fcode_revision[0] = bcode[0x12]; 3092 ha->fcode_revision[1] = bcode[0x13]; 3093 ql_dbg(ql_dbg_init, vha, 0x005c, 3094 "Read FCODE %d.%d.\n", 3095 ha->fcode_revision[1], ha->fcode_revision[0]); 3096 break; 3097 case ROM_CODE_TYPE_EFI: 3098 /* Extensible Firmware Interface (EFI). */ 3099 ha->efi_revision[0] = bcode[0x12]; 3100 ha->efi_revision[1] = bcode[0x13]; 3101 ql_dbg(ql_dbg_init, vha, 0x005d, 3102 "Read EFI %d.%d.\n", 3103 ha->efi_revision[1], ha->efi_revision[0]); 3104 break; 3105 default: 3106 ql_log(ql_log_warn, vha, 0x005e, 3107 "Unrecognized code type %x at pcids %x.\n", 3108 code_type, pcids); 3109 break; 3110 } 3111 3112 last_image = bcode[0x15] & BIT_7; 3113 3114 /* Locate next PCI expansion ROM. */ 3115 pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512; 3116 } while (!last_image); 3117 3118 /* Read firmware image information. */ 3119 memset(ha->fw_revision, 0, sizeof(ha->fw_revision)); 3120 dcode = mbuf; 3121 faddr = ha->flt_region_fw; 3122 if (IS_QLA27XX(ha) && 3123 qla27xx_find_valid_image(vha) == QLA27XX_SECONDARY_IMAGE) 3124 faddr = ha->flt_region_fw_sec; 3125 3126 qla24xx_read_flash_data(vha, dcode, faddr + 4, 4); 3127 for (i = 0; i < 4; i++) 3128 dcode[i] = be32_to_cpu(dcode[i]); 3129 3130 if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff && 3131 dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) || 3132 (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 && 3133 dcode[3] == 0)) { 3134 ql_log(ql_log_warn, vha, 0x005f, 3135 "Unrecognized fw revision at %x.\n", 3136 ha->flt_region_fw * 4); 3137 } else { 3138 ha->fw_revision[0] = dcode[0]; 3139 ha->fw_revision[1] = dcode[1]; 3140 ha->fw_revision[2] = dcode[2]; 3141 ha->fw_revision[3] = dcode[3]; 3142 ql_dbg(ql_dbg_init, vha, 0x0060, 3143 "Firmware revision %d.%d.%d (%x).\n", 3144 ha->fw_revision[0], ha->fw_revision[1], 3145 ha->fw_revision[2], ha->fw_revision[3]); 3146 } 3147 3148 /* Check for golden firmware and get version if available */ 3149 if (!IS_QLA81XX(ha)) { 3150 /* Golden firmware is not present in non 81XX adapters */ 3151 return ret; 3152 } 3153 3154 memset(ha->gold_fw_version, 0, sizeof(ha->gold_fw_version)); 3155 dcode = mbuf; 3156 ha->isp_ops->read_optrom(vha, (uint8_t *)dcode, 3157 ha->flt_region_gold_fw << 2, 32); 3158 3159 if (dcode[4] == 0xFFFFFFFF && dcode[5] == 0xFFFFFFFF && 3160 dcode[6] == 0xFFFFFFFF && dcode[7] == 0xFFFFFFFF) { 3161 ql_log(ql_log_warn, vha, 0x0056, 3162 "Unrecognized golden fw at 0x%x.\n", 3163 ha->flt_region_gold_fw * 4); 3164 return ret; 3165 } 3166 3167 for (i = 4; i < 8; i++) 3168 ha->gold_fw_version[i-4] = be32_to_cpu(dcode[i]); 3169 3170 return ret; 3171 } 3172 3173 static int 3174 qla2xxx_is_vpd_valid(uint8_t *pos, uint8_t *end) 3175 { 3176 if (pos >= end || *pos != 0x82) 3177 return 0; 3178 3179 pos += 3 + pos[1]; 3180 if (pos >= end || *pos != 0x90) 3181 return 0; 3182 3183 pos += 3 + pos[1]; 3184 if (pos >= end || *pos != 0x78) 3185 return 0; 3186 3187 return 1; 3188 } 3189 3190 int 3191 qla2xxx_get_vpd_field(scsi_qla_host_t *vha, char *key, char *str, size_t size) 3192 { 3193 struct qla_hw_data *ha = vha->hw; 3194 uint8_t *pos = ha->vpd; 3195 uint8_t *end = pos + ha->vpd_size; 3196 int len = 0; 3197 3198 if (!IS_FWI2_CAPABLE(ha) || !qla2xxx_is_vpd_valid(pos, end)) 3199 return 0; 3200 3201 while (pos < end && *pos != 0x78) { 3202 len = (*pos == 0x82) ? pos[1] : pos[2]; 3203 3204 if (!strncmp(pos, key, strlen(key))) 3205 break; 3206 3207 if (*pos != 0x90 && *pos != 0x91) 3208 pos += len; 3209 3210 pos += 3; 3211 } 3212 3213 if (pos < end - len && *pos != 0x78) 3214 return scnprintf(str, size, "%.*s", len, pos + 3); 3215 3216 return 0; 3217 } 3218 3219 int 3220 qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *vha) 3221 { 3222 int len, max_len; 3223 uint32_t fcp_prio_addr; 3224 struct qla_hw_data *ha = vha->hw; 3225 3226 if (!ha->fcp_prio_cfg) { 3227 ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE); 3228 if (!ha->fcp_prio_cfg) { 3229 ql_log(ql_log_warn, vha, 0x00d5, 3230 "Unable to allocate memory for fcp priority data (%x).\n", 3231 FCP_PRIO_CFG_SIZE); 3232 return QLA_FUNCTION_FAILED; 3233 } 3234 } 3235 memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE); 3236 3237 fcp_prio_addr = ha->flt_region_fcp_prio; 3238 3239 /* first read the fcp priority data header from flash */ 3240 ha->isp_ops->read_optrom(vha, (uint8_t *)ha->fcp_prio_cfg, 3241 fcp_prio_addr << 2, FCP_PRIO_CFG_HDR_SIZE); 3242 3243 if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 0)) 3244 goto fail; 3245 3246 /* read remaining FCP CMD config data from flash */ 3247 fcp_prio_addr += (FCP_PRIO_CFG_HDR_SIZE >> 2); 3248 len = ha->fcp_prio_cfg->num_entries * FCP_PRIO_CFG_ENTRY_SIZE; 3249 max_len = FCP_PRIO_CFG_SIZE - FCP_PRIO_CFG_HDR_SIZE; 3250 3251 ha->isp_ops->read_optrom(vha, (uint8_t *)&ha->fcp_prio_cfg->entry[0], 3252 fcp_prio_addr << 2, (len < max_len ? len : max_len)); 3253 3254 /* revalidate the entire FCP priority config data, including entries */ 3255 if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 1)) 3256 goto fail; 3257 3258 ha->flags.fcp_prio_enabled = 1; 3259 return QLA_SUCCESS; 3260 fail: 3261 vfree(ha->fcp_prio_cfg); 3262 ha->fcp_prio_cfg = NULL; 3263 return QLA_FUNCTION_FAILED; 3264 } 3265