1 /* 2 * QLogic Fibre Channel HBA Driver 3 * Copyright (c) 2003-2008 QLogic Corporation 4 * 5 * See LICENSE.qla2xxx for copyright and licensing details. 6 */ 7 #include "qla_def.h" 8 9 #include <linux/delay.h> 10 11 12 /* 13 * qla2x00_mailbox_command 14 * Issue mailbox command and waits for completion. 15 * 16 * Input: 17 * ha = adapter block pointer. 18 * mcp = driver internal mbx struct pointer. 19 * 20 * Output: 21 * mb[MAX_MAILBOX_REGISTER_COUNT] = returned mailbox data. 22 * 23 * Returns: 24 * 0 : QLA_SUCCESS = cmd performed success 25 * 1 : QLA_FUNCTION_FAILED (error encountered) 26 * 6 : QLA_FUNCTION_TIMEOUT (timeout condition encountered) 27 * 28 * Context: 29 * Kernel context. 30 */ 31 static int 32 qla2x00_mailbox_command(scsi_qla_host_t *pvha, mbx_cmd_t *mcp) 33 { 34 int rval; 35 unsigned long flags = 0; 36 device_reg_t __iomem *reg; 37 uint8_t abort_active; 38 uint8_t io_lock_on; 39 uint16_t command; 40 uint16_t *iptr; 41 uint16_t __iomem *optr; 42 uint32_t cnt; 43 uint32_t mboxes; 44 unsigned long wait_time; 45 scsi_qla_host_t *ha = to_qla_parent(pvha); 46 47 reg = ha->iobase; 48 io_lock_on = ha->flags.init_done; 49 50 rval = QLA_SUCCESS; 51 abort_active = test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); 52 53 DEBUG11(printk("%s(%ld): entered.\n", __func__, pvha->host_no)); 54 55 /* 56 * Wait for active mailbox commands to finish by waiting at most tov 57 * seconds. This is to serialize actual issuing of mailbox cmds during 58 * non ISP abort time. 59 */ 60 if (!abort_active) { 61 if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, 62 mcp->tov * HZ)) { 63 /* Timeout occurred. Return error. */ 64 DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " 65 "Exiting.\n", __func__, ha->host_no)); 66 return QLA_FUNCTION_TIMEOUT; 67 } 68 } 69 70 ha->flags.mbox_busy = 1; 71 /* Save mailbox command for debug */ 72 ha->mcp = mcp; 73 74 DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n", 75 ha->host_no, mcp->mb[0])); 76 77 spin_lock_irqsave(&ha->hardware_lock, flags); 78 79 /* Load mailbox registers. */ 80 if (IS_FWI2_CAPABLE(ha)) 81 optr = (uint16_t __iomem *)®->isp24.mailbox0; 82 else 83 optr = (uint16_t __iomem *)MAILBOX_REG(ha, ®->isp, 0); 84 85 iptr = mcp->mb; 86 command = mcp->mb[0]; 87 mboxes = mcp->out_mb; 88 89 for (cnt = 0; cnt < ha->mbx_count; cnt++) { 90 if (IS_QLA2200(ha) && cnt == 8) 91 optr = 92 (uint16_t __iomem *)MAILBOX_REG(ha, ®->isp, 8); 93 if (mboxes & BIT_0) 94 WRT_REG_WORD(optr, *iptr); 95 96 mboxes >>= 1; 97 optr++; 98 iptr++; 99 } 100 101 #if defined(QL_DEBUG_LEVEL_1) 102 printk("%s(%ld): Loaded MBX registers (displayed in bytes) = \n", 103 __func__, ha->host_no); 104 qla2x00_dump_buffer((uint8_t *)mcp->mb, 16); 105 printk("\n"); 106 qla2x00_dump_buffer(((uint8_t *)mcp->mb + 0x10), 16); 107 printk("\n"); 108 qla2x00_dump_buffer(((uint8_t *)mcp->mb + 0x20), 8); 109 printk("\n"); 110 printk("%s(%ld): I/O address = %p.\n", __func__, ha->host_no, optr); 111 qla2x00_dump_regs(ha); 112 #endif 113 114 /* Issue set host interrupt command to send cmd out. */ 115 ha->flags.mbox_int = 0; 116 clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); 117 118 /* Unlock mbx registers and wait for interrupt */ 119 DEBUG11(printk("%s(%ld): going to unlock irq & waiting for interrupt. " 120 "jiffies=%lx.\n", __func__, ha->host_no, jiffies)); 121 122 /* Wait for mbx cmd completion until timeout */ 123 124 if (!abort_active && io_lock_on) { 125 126 set_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); 127 128 if (IS_FWI2_CAPABLE(ha)) 129 WRT_REG_DWORD(®->isp24.hccr, HCCRX_SET_HOST_INT); 130 else 131 WRT_REG_WORD(®->isp.hccr, HCCR_SET_HOST_INT); 132 spin_unlock_irqrestore(&ha->hardware_lock, flags); 133 134 wait_for_completion_timeout(&ha->mbx_intr_comp, mcp->tov * HZ); 135 136 clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); 137 138 } else { 139 DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__, 140 ha->host_no, command)); 141 142 if (IS_FWI2_CAPABLE(ha)) 143 WRT_REG_DWORD(®->isp24.hccr, HCCRX_SET_HOST_INT); 144 else 145 WRT_REG_WORD(®->isp.hccr, HCCR_SET_HOST_INT); 146 spin_unlock_irqrestore(&ha->hardware_lock, flags); 147 148 wait_time = jiffies + mcp->tov * HZ; /* wait at most tov secs */ 149 while (!ha->flags.mbox_int) { 150 if (time_after(jiffies, wait_time)) 151 break; 152 153 /* Check for pending interrupts. */ 154 qla2x00_poll(ha); 155 156 if (command != MBC_LOAD_RISC_RAM_EXTENDED && 157 !ha->flags.mbox_int) 158 msleep(10); 159 } /* while */ 160 } 161 162 /* Check whether we timed out */ 163 if (ha->flags.mbox_int) { 164 uint16_t *iptr2; 165 166 DEBUG3_11(printk("%s(%ld): cmd %x completed.\n", __func__, 167 ha->host_no, command)); 168 169 /* Got interrupt. Clear the flag. */ 170 ha->flags.mbox_int = 0; 171 clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); 172 173 if (ha->mailbox_out[0] != MBS_COMMAND_COMPLETE) 174 rval = QLA_FUNCTION_FAILED; 175 176 /* Load return mailbox registers. */ 177 iptr2 = mcp->mb; 178 iptr = (uint16_t *)&ha->mailbox_out[0]; 179 mboxes = mcp->in_mb; 180 for (cnt = 0; cnt < ha->mbx_count; cnt++) { 181 if (mboxes & BIT_0) 182 *iptr2 = *iptr; 183 184 mboxes >>= 1; 185 iptr2++; 186 iptr++; 187 } 188 } else { 189 190 #if defined(QL_DEBUG_LEVEL_2) || defined(QL_DEBUG_LEVEL_3) || \ 191 defined(QL_DEBUG_LEVEL_11) 192 uint16_t mb0; 193 uint32_t ictrl; 194 195 if (IS_FWI2_CAPABLE(ha)) { 196 mb0 = RD_REG_WORD(®->isp24.mailbox0); 197 ictrl = RD_REG_DWORD(®->isp24.ictrl); 198 } else { 199 mb0 = RD_MAILBOX_REG(ha, ®->isp, 0); 200 ictrl = RD_REG_WORD(®->isp.ictrl); 201 } 202 printk("%s(%ld): **** MB Command Timeout for cmd %x ****\n", 203 __func__, ha->host_no, command); 204 printk("%s(%ld): icontrol=%x jiffies=%lx\n", __func__, 205 ha->host_no, ictrl, jiffies); 206 printk("%s(%ld): *** mailbox[0] = 0x%x ***\n", __func__, 207 ha->host_no, mb0); 208 qla2x00_dump_regs(ha); 209 #endif 210 211 rval = QLA_FUNCTION_TIMEOUT; 212 } 213 214 ha->flags.mbox_busy = 0; 215 216 /* Clean up */ 217 ha->mcp = NULL; 218 219 if (abort_active || !io_lock_on) { 220 DEBUG11(printk("%s(%ld): checking for additional resp " 221 "interrupt.\n", __func__, ha->host_no)); 222 223 /* polling mode for non isp_abort commands. */ 224 qla2x00_poll(ha); 225 } 226 227 if (rval == QLA_FUNCTION_TIMEOUT && 228 mcp->mb[0] != MBC_GEN_SYSTEM_ERROR) { 229 if (!io_lock_on || (mcp->flags & IOCTL_CMD)) { 230 /* not in dpc. schedule it for dpc to take over. */ 231 DEBUG(printk("%s(%ld): timeout schedule " 232 "isp_abort_needed.\n", __func__, ha->host_no)); 233 DEBUG2_3_11(printk("%s(%ld): timeout schedule " 234 "isp_abort_needed.\n", __func__, ha->host_no)); 235 qla_printk(KERN_WARNING, ha, 236 "Mailbox command timeout occurred. Scheduling ISP " 237 "abort.\n"); 238 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); 239 qla2xxx_wake_dpc(ha); 240 } else if (!abort_active) { 241 /* call abort directly since we are in the DPC thread */ 242 DEBUG(printk("%s(%ld): timeout calling abort_isp\n", 243 __func__, ha->host_no)); 244 DEBUG2_3_11(printk("%s(%ld): timeout calling " 245 "abort_isp\n", __func__, ha->host_no)); 246 qla_printk(KERN_WARNING, ha, 247 "Mailbox command timeout occurred. Issuing ISP " 248 "abort.\n"); 249 250 set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); 251 clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); 252 if (qla2x00_abort_isp(ha)) { 253 /* Failed. retry later. */ 254 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); 255 } 256 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); 257 DEBUG(printk("%s(%ld): finished abort_isp\n", __func__, 258 ha->host_no)); 259 DEBUG2_3_11(printk("%s(%ld): finished abort_isp\n", 260 __func__, ha->host_no)); 261 } 262 } 263 264 /* Allow next mbx cmd to come in. */ 265 if (!abort_active) 266 complete(&ha->mbx_cmd_comp); 267 268 if (rval) { 269 DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, " 270 "mbx2=%x, cmd=%x ****\n", __func__, ha->host_no, 271 mcp->mb[0], mcp->mb[1], mcp->mb[2], command)); 272 } else { 273 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 274 } 275 276 return rval; 277 } 278 279 int 280 qla2x00_load_ram(scsi_qla_host_t *ha, dma_addr_t req_dma, uint32_t risc_addr, 281 uint32_t risc_code_size) 282 { 283 int rval; 284 mbx_cmd_t mc; 285 mbx_cmd_t *mcp = &mc; 286 287 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 288 289 if (MSW(risc_addr) || IS_FWI2_CAPABLE(ha)) { 290 mcp->mb[0] = MBC_LOAD_RISC_RAM_EXTENDED; 291 mcp->mb[8] = MSW(risc_addr); 292 mcp->out_mb = MBX_8|MBX_0; 293 } else { 294 mcp->mb[0] = MBC_LOAD_RISC_RAM; 295 mcp->out_mb = MBX_0; 296 } 297 mcp->mb[1] = LSW(risc_addr); 298 mcp->mb[2] = MSW(req_dma); 299 mcp->mb[3] = LSW(req_dma); 300 mcp->mb[6] = MSW(MSD(req_dma)); 301 mcp->mb[7] = LSW(MSD(req_dma)); 302 mcp->out_mb |= MBX_7|MBX_6|MBX_3|MBX_2|MBX_1; 303 if (IS_FWI2_CAPABLE(ha)) { 304 mcp->mb[4] = MSW(risc_code_size); 305 mcp->mb[5] = LSW(risc_code_size); 306 mcp->out_mb |= MBX_5|MBX_4; 307 } else { 308 mcp->mb[4] = LSW(risc_code_size); 309 mcp->out_mb |= MBX_4; 310 } 311 312 mcp->in_mb = MBX_0; 313 mcp->tov = MBX_TOV_SECONDS; 314 mcp->flags = 0; 315 rval = qla2x00_mailbox_command(ha, mcp); 316 317 if (rval != QLA_SUCCESS) { 318 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__, 319 ha->host_no, rval, mcp->mb[0])); 320 } else { 321 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 322 } 323 324 return rval; 325 } 326 327 /* 328 * qla2x00_execute_fw 329 * Start adapter firmware. 330 * 331 * Input: 332 * ha = adapter block pointer. 333 * TARGET_QUEUE_LOCK must be released. 334 * ADAPTER_STATE_LOCK must be released. 335 * 336 * Returns: 337 * qla2x00 local function return status code. 338 * 339 * Context: 340 * Kernel context. 341 */ 342 int 343 qla2x00_execute_fw(scsi_qla_host_t *ha, uint32_t risc_addr) 344 { 345 int rval; 346 mbx_cmd_t mc; 347 mbx_cmd_t *mcp = &mc; 348 349 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 350 351 mcp->mb[0] = MBC_EXECUTE_FIRMWARE; 352 mcp->out_mb = MBX_0; 353 mcp->in_mb = MBX_0; 354 if (IS_FWI2_CAPABLE(ha)) { 355 mcp->mb[1] = MSW(risc_addr); 356 mcp->mb[2] = LSW(risc_addr); 357 mcp->mb[3] = 0; 358 mcp->mb[4] = 0; 359 mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1; 360 mcp->in_mb |= MBX_1; 361 } else { 362 mcp->mb[1] = LSW(risc_addr); 363 mcp->out_mb |= MBX_1; 364 if (IS_QLA2322(ha) || IS_QLA6322(ha)) { 365 mcp->mb[2] = 0; 366 mcp->out_mb |= MBX_2; 367 } 368 } 369 370 mcp->tov = MBX_TOV_SECONDS; 371 mcp->flags = 0; 372 rval = qla2x00_mailbox_command(ha, mcp); 373 374 if (rval != QLA_SUCCESS) { 375 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__, 376 ha->host_no, rval, mcp->mb[0])); 377 } else { 378 if (IS_FWI2_CAPABLE(ha)) { 379 DEBUG11(printk("%s(%ld): done exchanges=%x.\n", 380 __func__, ha->host_no, mcp->mb[1])); 381 } else { 382 DEBUG11(printk("%s(%ld): done.\n", __func__, 383 ha->host_no)); 384 } 385 } 386 387 return rval; 388 } 389 390 /* 391 * qla2x00_get_fw_version 392 * Get firmware version. 393 * 394 * Input: 395 * ha: adapter state pointer. 396 * major: pointer for major number. 397 * minor: pointer for minor number. 398 * subminor: pointer for subminor number. 399 * 400 * Returns: 401 * qla2x00 local function return status code. 402 * 403 * Context: 404 * Kernel context. 405 */ 406 void 407 qla2x00_get_fw_version(scsi_qla_host_t *ha, uint16_t *major, uint16_t *minor, 408 uint16_t *subminor, uint16_t *attributes, uint32_t *memory) 409 { 410 int rval; 411 mbx_cmd_t mc; 412 mbx_cmd_t *mcp = &mc; 413 414 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 415 416 mcp->mb[0] = MBC_GET_FIRMWARE_VERSION; 417 mcp->out_mb = MBX_0; 418 mcp->in_mb = MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; 419 mcp->flags = 0; 420 mcp->tov = MBX_TOV_SECONDS; 421 rval = qla2x00_mailbox_command(ha, mcp); 422 423 /* Return mailbox data. */ 424 *major = mcp->mb[1]; 425 *minor = mcp->mb[2]; 426 *subminor = mcp->mb[3]; 427 *attributes = mcp->mb[6]; 428 if (IS_QLA2100(ha) || IS_QLA2200(ha)) 429 *memory = 0x1FFFF; /* Defaults to 128KB. */ 430 else 431 *memory = (mcp->mb[5] << 16) | mcp->mb[4]; 432 433 if (rval != QLA_SUCCESS) { 434 /*EMPTY*/ 435 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, 436 ha->host_no, rval)); 437 } else { 438 /*EMPTY*/ 439 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 440 } 441 } 442 443 /* 444 * qla2x00_get_fw_options 445 * Set firmware options. 446 * 447 * Input: 448 * ha = adapter block pointer. 449 * fwopt = pointer for firmware options. 450 * 451 * Returns: 452 * qla2x00 local function return status code. 453 * 454 * Context: 455 * Kernel context. 456 */ 457 int 458 qla2x00_get_fw_options(scsi_qla_host_t *ha, uint16_t *fwopts) 459 { 460 int rval; 461 mbx_cmd_t mc; 462 mbx_cmd_t *mcp = &mc; 463 464 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 465 466 mcp->mb[0] = MBC_GET_FIRMWARE_OPTION; 467 mcp->out_mb = MBX_0; 468 mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0; 469 mcp->tov = MBX_TOV_SECONDS; 470 mcp->flags = 0; 471 rval = qla2x00_mailbox_command(ha, mcp); 472 473 if (rval != QLA_SUCCESS) { 474 /*EMPTY*/ 475 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, 476 ha->host_no, rval)); 477 } else { 478 fwopts[0] = mcp->mb[0]; 479 fwopts[1] = mcp->mb[1]; 480 fwopts[2] = mcp->mb[2]; 481 fwopts[3] = mcp->mb[3]; 482 483 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 484 } 485 486 return rval; 487 } 488 489 490 /* 491 * qla2x00_set_fw_options 492 * Set firmware options. 493 * 494 * Input: 495 * ha = adapter block pointer. 496 * fwopt = pointer for firmware options. 497 * 498 * Returns: 499 * qla2x00 local function return status code. 500 * 501 * Context: 502 * Kernel context. 503 */ 504 int 505 qla2x00_set_fw_options(scsi_qla_host_t *ha, uint16_t *fwopts) 506 { 507 int rval; 508 mbx_cmd_t mc; 509 mbx_cmd_t *mcp = &mc; 510 511 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 512 513 mcp->mb[0] = MBC_SET_FIRMWARE_OPTION; 514 mcp->mb[1] = fwopts[1]; 515 mcp->mb[2] = fwopts[2]; 516 mcp->mb[3] = fwopts[3]; 517 mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; 518 mcp->in_mb = MBX_0; 519 if (IS_FWI2_CAPABLE(ha)) { 520 mcp->in_mb |= MBX_1; 521 } else { 522 mcp->mb[10] = fwopts[10]; 523 mcp->mb[11] = fwopts[11]; 524 mcp->mb[12] = 0; /* Undocumented, but used */ 525 mcp->out_mb |= MBX_12|MBX_11|MBX_10; 526 } 527 mcp->tov = MBX_TOV_SECONDS; 528 mcp->flags = 0; 529 rval = qla2x00_mailbox_command(ha, mcp); 530 531 fwopts[0] = mcp->mb[0]; 532 533 if (rval != QLA_SUCCESS) { 534 /*EMPTY*/ 535 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x/%x).\n", __func__, 536 ha->host_no, rval, mcp->mb[0], mcp->mb[1])); 537 } else { 538 /*EMPTY*/ 539 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 540 } 541 542 return rval; 543 } 544 545 /* 546 * qla2x00_mbx_reg_test 547 * Mailbox register wrap test. 548 * 549 * Input: 550 * ha = adapter block pointer. 551 * TARGET_QUEUE_LOCK must be released. 552 * ADAPTER_STATE_LOCK must be released. 553 * 554 * Returns: 555 * qla2x00 local function return status code. 556 * 557 * Context: 558 * Kernel context. 559 */ 560 int 561 qla2x00_mbx_reg_test(scsi_qla_host_t *ha) 562 { 563 int rval; 564 mbx_cmd_t mc; 565 mbx_cmd_t *mcp = &mc; 566 567 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", ha->host_no)); 568 569 mcp->mb[0] = MBC_MAILBOX_REGISTER_TEST; 570 mcp->mb[1] = 0xAAAA; 571 mcp->mb[2] = 0x5555; 572 mcp->mb[3] = 0xAA55; 573 mcp->mb[4] = 0x55AA; 574 mcp->mb[5] = 0xA5A5; 575 mcp->mb[6] = 0x5A5A; 576 mcp->mb[7] = 0x2525; 577 mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; 578 mcp->in_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; 579 mcp->tov = MBX_TOV_SECONDS; 580 mcp->flags = 0; 581 rval = qla2x00_mailbox_command(ha, mcp); 582 583 if (rval == QLA_SUCCESS) { 584 if (mcp->mb[1] != 0xAAAA || mcp->mb[2] != 0x5555 || 585 mcp->mb[3] != 0xAA55 || mcp->mb[4] != 0x55AA) 586 rval = QLA_FUNCTION_FAILED; 587 if (mcp->mb[5] != 0xA5A5 || mcp->mb[6] != 0x5A5A || 588 mcp->mb[7] != 0x2525) 589 rval = QLA_FUNCTION_FAILED; 590 if (rval == QLA_FUNCTION_FAILED) { 591 struct device_reg_24xx __iomem *reg = 592 &ha->iobase->isp24; 593 594 qla2xxx_hw_event_log(ha, HW_EVENT_ISP_ERR, 0, 595 LSW(RD_REG_DWORD(®->hccr)), 596 LSW(RD_REG_DWORD(®->istatus))); 597 } 598 } 599 600 if (rval != QLA_SUCCESS) { 601 /*EMPTY*/ 602 DEBUG2_3_11(printk("qla2x00_mbx_reg_test(%ld): failed=%x.\n", 603 ha->host_no, rval)); 604 } else { 605 /*EMPTY*/ 606 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): done.\n", 607 ha->host_no)); 608 } 609 610 return rval; 611 } 612 613 /* 614 * qla2x00_verify_checksum 615 * Verify firmware checksum. 616 * 617 * Input: 618 * ha = adapter block pointer. 619 * TARGET_QUEUE_LOCK must be released. 620 * ADAPTER_STATE_LOCK must be released. 621 * 622 * Returns: 623 * qla2x00 local function return status code. 624 * 625 * Context: 626 * Kernel context. 627 */ 628 int 629 qla2x00_verify_checksum(scsi_qla_host_t *ha, uint32_t risc_addr) 630 { 631 int rval; 632 mbx_cmd_t mc; 633 mbx_cmd_t *mcp = &mc; 634 635 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 636 637 mcp->mb[0] = MBC_VERIFY_CHECKSUM; 638 mcp->out_mb = MBX_0; 639 mcp->in_mb = MBX_0; 640 if (IS_FWI2_CAPABLE(ha)) { 641 mcp->mb[1] = MSW(risc_addr); 642 mcp->mb[2] = LSW(risc_addr); 643 mcp->out_mb |= MBX_2|MBX_1; 644 mcp->in_mb |= MBX_2|MBX_1; 645 } else { 646 mcp->mb[1] = LSW(risc_addr); 647 mcp->out_mb |= MBX_1; 648 mcp->in_mb |= MBX_1; 649 } 650 651 mcp->tov = MBX_TOV_SECONDS; 652 mcp->flags = 0; 653 rval = qla2x00_mailbox_command(ha, mcp); 654 655 if (rval != QLA_SUCCESS) { 656 DEBUG2_3_11(printk("%s(%ld): failed=%x chk sum=%x.\n", __func__, 657 ha->host_no, rval, IS_FWI2_CAPABLE(ha) ? 658 (mcp->mb[2] << 16) | mcp->mb[1]: mcp->mb[1])); 659 } else { 660 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 661 } 662 663 return rval; 664 } 665 666 /* 667 * qla2x00_issue_iocb 668 * Issue IOCB using mailbox command 669 * 670 * Input: 671 * ha = adapter state pointer. 672 * buffer = buffer pointer. 673 * phys_addr = physical address of buffer. 674 * size = size of buffer. 675 * TARGET_QUEUE_LOCK must be released. 676 * ADAPTER_STATE_LOCK must be released. 677 * 678 * Returns: 679 * qla2x00 local function return status code. 680 * 681 * Context: 682 * Kernel context. 683 */ 684 static int 685 qla2x00_issue_iocb_timeout(scsi_qla_host_t *ha, void *buffer, 686 dma_addr_t phys_addr, size_t size, uint32_t tov) 687 { 688 int rval; 689 mbx_cmd_t mc; 690 mbx_cmd_t *mcp = &mc; 691 692 mcp->mb[0] = MBC_IOCB_COMMAND_A64; 693 mcp->mb[1] = 0; 694 mcp->mb[2] = MSW(phys_addr); 695 mcp->mb[3] = LSW(phys_addr); 696 mcp->mb[6] = MSW(MSD(phys_addr)); 697 mcp->mb[7] = LSW(MSD(phys_addr)); 698 mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; 699 mcp->in_mb = MBX_2|MBX_0; 700 mcp->tov = tov; 701 mcp->flags = 0; 702 rval = qla2x00_mailbox_command(ha, mcp); 703 704 if (rval != QLA_SUCCESS) { 705 /*EMPTY*/ 706 DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n", 707 ha->host_no, rval)); 708 DEBUG2(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n", 709 ha->host_no, rval)); 710 } else { 711 sts_entry_t *sts_entry = (sts_entry_t *) buffer; 712 713 /* Mask reserved bits. */ 714 sts_entry->entry_status &= 715 IS_FWI2_CAPABLE(ha) ? RF_MASK_24XX :RF_MASK; 716 } 717 718 return rval; 719 } 720 721 int 722 qla2x00_issue_iocb(scsi_qla_host_t *ha, void *buffer, dma_addr_t phys_addr, 723 size_t size) 724 { 725 return qla2x00_issue_iocb_timeout(ha, buffer, phys_addr, size, 726 MBX_TOV_SECONDS); 727 } 728 729 /* 730 * qla2x00_abort_command 731 * Abort command aborts a specified IOCB. 732 * 733 * Input: 734 * ha = adapter block pointer. 735 * sp = SB structure pointer. 736 * 737 * Returns: 738 * qla2x00 local function return status code. 739 * 740 * Context: 741 * Kernel context. 742 */ 743 int 744 qla2x00_abort_command(scsi_qla_host_t *ha, srb_t *sp) 745 { 746 unsigned long flags = 0; 747 fc_port_t *fcport; 748 int rval; 749 uint32_t handle; 750 mbx_cmd_t mc; 751 mbx_cmd_t *mcp = &mc; 752 753 DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", ha->host_no)); 754 755 fcport = sp->fcport; 756 757 spin_lock_irqsave(&ha->hardware_lock, flags); 758 for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) { 759 if (ha->outstanding_cmds[handle] == sp) 760 break; 761 } 762 spin_unlock_irqrestore(&ha->hardware_lock, flags); 763 764 if (handle == MAX_OUTSTANDING_COMMANDS) { 765 /* command not found */ 766 return QLA_FUNCTION_FAILED; 767 } 768 769 mcp->mb[0] = MBC_ABORT_COMMAND; 770 if (HAS_EXTENDED_IDS(ha)) 771 mcp->mb[1] = fcport->loop_id; 772 else 773 mcp->mb[1] = fcport->loop_id << 8; 774 mcp->mb[2] = (uint16_t)handle; 775 mcp->mb[3] = (uint16_t)(handle >> 16); 776 mcp->mb[6] = (uint16_t)sp->cmd->device->lun; 777 mcp->out_mb = MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; 778 mcp->in_mb = MBX_0; 779 mcp->tov = MBX_TOV_SECONDS; 780 mcp->flags = 0; 781 rval = qla2x00_mailbox_command(ha, mcp); 782 783 if (rval != QLA_SUCCESS) { 784 DEBUG2_3_11(printk("qla2x00_abort_command(%ld): failed=%x.\n", 785 ha->host_no, rval)); 786 } else { 787 DEBUG11(printk("qla2x00_abort_command(%ld): done.\n", 788 ha->host_no)); 789 } 790 791 return rval; 792 } 793 794 int 795 qla2x00_abort_target(struct fc_port *fcport, unsigned int l) 796 { 797 int rval, rval2; 798 mbx_cmd_t mc; 799 mbx_cmd_t *mcp = &mc; 800 scsi_qla_host_t *ha; 801 802 DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no)); 803 804 l = l; 805 ha = fcport->ha; 806 mcp->mb[0] = MBC_ABORT_TARGET; 807 mcp->out_mb = MBX_9|MBX_2|MBX_1|MBX_0; 808 if (HAS_EXTENDED_IDS(ha)) { 809 mcp->mb[1] = fcport->loop_id; 810 mcp->mb[10] = 0; 811 mcp->out_mb |= MBX_10; 812 } else { 813 mcp->mb[1] = fcport->loop_id << 8; 814 } 815 mcp->mb[2] = ha->loop_reset_delay; 816 mcp->mb[9] = ha->vp_idx; 817 818 mcp->in_mb = MBX_0; 819 mcp->tov = MBX_TOV_SECONDS; 820 mcp->flags = 0; 821 rval = qla2x00_mailbox_command(ha, mcp); 822 if (rval != QLA_SUCCESS) { 823 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, 824 ha->host_no, rval)); 825 } 826 827 /* Issue marker IOCB. */ 828 rval2 = qla2x00_marker(ha, fcport->loop_id, 0, MK_SYNC_ID); 829 if (rval2 != QLA_SUCCESS) { 830 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB " 831 "(%x).\n", __func__, ha->host_no, rval2)); 832 } else { 833 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 834 } 835 836 return rval; 837 } 838 839 int 840 qla2x00_lun_reset(struct fc_port *fcport, unsigned int l) 841 { 842 int rval, rval2; 843 mbx_cmd_t mc; 844 mbx_cmd_t *mcp = &mc; 845 scsi_qla_host_t *ha; 846 847 DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no)); 848 849 ha = fcport->ha; 850 mcp->mb[0] = MBC_LUN_RESET; 851 mcp->out_mb = MBX_9|MBX_3|MBX_2|MBX_1|MBX_0; 852 if (HAS_EXTENDED_IDS(ha)) 853 mcp->mb[1] = fcport->loop_id; 854 else 855 mcp->mb[1] = fcport->loop_id << 8; 856 mcp->mb[2] = l; 857 mcp->mb[3] = 0; 858 mcp->mb[9] = ha->vp_idx; 859 860 mcp->in_mb = MBX_0; 861 mcp->tov = MBX_TOV_SECONDS; 862 mcp->flags = 0; 863 rval = qla2x00_mailbox_command(ha, mcp); 864 if (rval != QLA_SUCCESS) { 865 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, 866 ha->host_no, rval)); 867 } 868 869 /* Issue marker IOCB. */ 870 rval2 = qla2x00_marker(ha, fcport->loop_id, l, MK_SYNC_ID_LUN); 871 if (rval2 != QLA_SUCCESS) { 872 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB " 873 "(%x).\n", __func__, ha->host_no, rval2)); 874 } else { 875 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 876 } 877 878 return rval; 879 } 880 881 /* 882 * qla2x00_get_adapter_id 883 * Get adapter ID and topology. 884 * 885 * Input: 886 * ha = adapter block pointer. 887 * id = pointer for loop ID. 888 * al_pa = pointer for AL_PA. 889 * area = pointer for area. 890 * domain = pointer for domain. 891 * top = pointer for topology. 892 * TARGET_QUEUE_LOCK must be released. 893 * ADAPTER_STATE_LOCK must be released. 894 * 895 * Returns: 896 * qla2x00 local function return status code. 897 * 898 * Context: 899 * Kernel context. 900 */ 901 int 902 qla2x00_get_adapter_id(scsi_qla_host_t *ha, uint16_t *id, uint8_t *al_pa, 903 uint8_t *area, uint8_t *domain, uint16_t *top, uint16_t *sw_cap) 904 { 905 int rval; 906 mbx_cmd_t mc; 907 mbx_cmd_t *mcp = &mc; 908 909 DEBUG11(printk("qla2x00_get_adapter_id(%ld): entered.\n", 910 ha->host_no)); 911 912 mcp->mb[0] = MBC_GET_ADAPTER_LOOP_ID; 913 mcp->mb[9] = ha->vp_idx; 914 mcp->out_mb = MBX_9|MBX_0; 915 mcp->in_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; 916 mcp->tov = MBX_TOV_SECONDS; 917 mcp->flags = 0; 918 rval = qla2x00_mailbox_command(ha, mcp); 919 if (mcp->mb[0] == MBS_COMMAND_ERROR) 920 rval = QLA_COMMAND_ERROR; 921 else if (mcp->mb[0] == MBS_INVALID_COMMAND) 922 rval = QLA_INVALID_COMMAND; 923 924 /* Return data. */ 925 *id = mcp->mb[1]; 926 *al_pa = LSB(mcp->mb[2]); 927 *area = MSB(mcp->mb[2]); 928 *domain = LSB(mcp->mb[3]); 929 *top = mcp->mb[6]; 930 *sw_cap = mcp->mb[7]; 931 932 if (rval != QLA_SUCCESS) { 933 /*EMPTY*/ 934 DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n", 935 ha->host_no, rval)); 936 } else { 937 /*EMPTY*/ 938 DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n", 939 ha->host_no)); 940 } 941 942 return rval; 943 } 944 945 /* 946 * qla2x00_get_retry_cnt 947 * Get current firmware login retry count and delay. 948 * 949 * Input: 950 * ha = adapter block pointer. 951 * retry_cnt = pointer to login retry count. 952 * tov = pointer to login timeout value. 953 * 954 * Returns: 955 * qla2x00 local function return status code. 956 * 957 * Context: 958 * Kernel context. 959 */ 960 int 961 qla2x00_get_retry_cnt(scsi_qla_host_t *ha, uint8_t *retry_cnt, uint8_t *tov, 962 uint16_t *r_a_tov) 963 { 964 int rval; 965 uint16_t ratov; 966 mbx_cmd_t mc; 967 mbx_cmd_t *mcp = &mc; 968 969 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): entered.\n", 970 ha->host_no)); 971 972 mcp->mb[0] = MBC_GET_RETRY_COUNT; 973 mcp->out_mb = MBX_0; 974 mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0; 975 mcp->tov = MBX_TOV_SECONDS; 976 mcp->flags = 0; 977 rval = qla2x00_mailbox_command(ha, mcp); 978 979 if (rval != QLA_SUCCESS) { 980 /*EMPTY*/ 981 DEBUG2_3_11(printk("qla2x00_get_retry_cnt(%ld): failed = %x.\n", 982 ha->host_no, mcp->mb[0])); 983 } else { 984 /* Convert returned data and check our values. */ 985 *r_a_tov = mcp->mb[3] / 2; 986 ratov = (mcp->mb[3]/2) / 10; /* mb[3] value is in 100ms */ 987 if (mcp->mb[1] * ratov > (*retry_cnt) * (*tov)) { 988 /* Update to the larger values */ 989 *retry_cnt = (uint8_t)mcp->mb[1]; 990 *tov = ratov; 991 } 992 993 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): done. mb3=%d " 994 "ratov=%d.\n", ha->host_no, mcp->mb[3], ratov)); 995 } 996 997 return rval; 998 } 999 1000 /* 1001 * qla2x00_init_firmware 1002 * Initialize adapter firmware. 1003 * 1004 * Input: 1005 * ha = adapter block pointer. 1006 * dptr = Initialization control block pointer. 1007 * size = size of initialization control block. 1008 * TARGET_QUEUE_LOCK must be released. 1009 * ADAPTER_STATE_LOCK must be released. 1010 * 1011 * Returns: 1012 * qla2x00 local function return status code. 1013 * 1014 * Context: 1015 * Kernel context. 1016 */ 1017 int 1018 qla2x00_init_firmware(scsi_qla_host_t *ha, uint16_t size) 1019 { 1020 int rval; 1021 mbx_cmd_t mc; 1022 mbx_cmd_t *mcp = &mc; 1023 1024 DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n", 1025 ha->host_no)); 1026 1027 if (ha->flags.npiv_supported) 1028 mcp->mb[0] = MBC_MID_INITIALIZE_FIRMWARE; 1029 else 1030 mcp->mb[0] = MBC_INITIALIZE_FIRMWARE; 1031 1032 mcp->mb[2] = MSW(ha->init_cb_dma); 1033 mcp->mb[3] = LSW(ha->init_cb_dma); 1034 mcp->mb[4] = 0; 1035 mcp->mb[5] = 0; 1036 mcp->mb[6] = MSW(MSD(ha->init_cb_dma)); 1037 mcp->mb[7] = LSW(MSD(ha->init_cb_dma)); 1038 mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; 1039 mcp->in_mb = MBX_5|MBX_4|MBX_0; 1040 mcp->buf_size = size; 1041 mcp->flags = MBX_DMA_OUT; 1042 mcp->tov = MBX_TOV_SECONDS; 1043 rval = qla2x00_mailbox_command(ha, mcp); 1044 1045 if (rval != QLA_SUCCESS) { 1046 /*EMPTY*/ 1047 DEBUG2_3_11(printk("qla2x00_init_firmware(%ld): failed=%x " 1048 "mb0=%x.\n", 1049 ha->host_no, rval, mcp->mb[0])); 1050 } else { 1051 /*EMPTY*/ 1052 DEBUG11(printk("qla2x00_init_firmware(%ld): done.\n", 1053 ha->host_no)); 1054 } 1055 1056 return rval; 1057 } 1058 1059 /* 1060 * qla2x00_get_port_database 1061 * Issue normal/enhanced get port database mailbox command 1062 * and copy device name as necessary. 1063 * 1064 * Input: 1065 * ha = adapter state pointer. 1066 * dev = structure pointer. 1067 * opt = enhanced cmd option byte. 1068 * 1069 * Returns: 1070 * qla2x00 local function return status code. 1071 * 1072 * Context: 1073 * Kernel context. 1074 */ 1075 int 1076 qla2x00_get_port_database(scsi_qla_host_t *ha, fc_port_t *fcport, uint8_t opt) 1077 { 1078 int rval; 1079 mbx_cmd_t mc; 1080 mbx_cmd_t *mcp = &mc; 1081 port_database_t *pd; 1082 struct port_database_24xx *pd24; 1083 dma_addr_t pd_dma; 1084 1085 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 1086 1087 pd24 = NULL; 1088 pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pd_dma); 1089 if (pd == NULL) { 1090 DEBUG2_3(printk("%s(%ld): failed to allocate Port Database " 1091 "structure.\n", __func__, ha->host_no)); 1092 return QLA_MEMORY_ALLOC_FAILED; 1093 } 1094 memset(pd, 0, max(PORT_DATABASE_SIZE, PORT_DATABASE_24XX_SIZE)); 1095 1096 mcp->mb[0] = MBC_GET_PORT_DATABASE; 1097 if (opt != 0 && !IS_FWI2_CAPABLE(ha)) 1098 mcp->mb[0] = MBC_ENHANCED_GET_PORT_DATABASE; 1099 mcp->mb[2] = MSW(pd_dma); 1100 mcp->mb[3] = LSW(pd_dma); 1101 mcp->mb[6] = MSW(MSD(pd_dma)); 1102 mcp->mb[7] = LSW(MSD(pd_dma)); 1103 mcp->mb[9] = ha->vp_idx; 1104 mcp->out_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; 1105 mcp->in_mb = MBX_0; 1106 if (IS_FWI2_CAPABLE(ha)) { 1107 mcp->mb[1] = fcport->loop_id; 1108 mcp->mb[10] = opt; 1109 mcp->out_mb |= MBX_10|MBX_1; 1110 mcp->in_mb |= MBX_1; 1111 } else if (HAS_EXTENDED_IDS(ha)) { 1112 mcp->mb[1] = fcport->loop_id; 1113 mcp->mb[10] = opt; 1114 mcp->out_mb |= MBX_10|MBX_1; 1115 } else { 1116 mcp->mb[1] = fcport->loop_id << 8 | opt; 1117 mcp->out_mb |= MBX_1; 1118 } 1119 mcp->buf_size = IS_FWI2_CAPABLE(ha) ? 1120 PORT_DATABASE_24XX_SIZE : PORT_DATABASE_SIZE; 1121 mcp->flags = MBX_DMA_IN; 1122 mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2); 1123 rval = qla2x00_mailbox_command(ha, mcp); 1124 if (rval != QLA_SUCCESS) 1125 goto gpd_error_out; 1126 1127 if (IS_FWI2_CAPABLE(ha)) { 1128 pd24 = (struct port_database_24xx *) pd; 1129 1130 /* Check for logged in state. */ 1131 if (pd24->current_login_state != PDS_PRLI_COMPLETE && 1132 pd24->last_login_state != PDS_PRLI_COMPLETE) { 1133 DEBUG2(printk("%s(%ld): Unable to verify " 1134 "login-state (%x/%x) for loop_id %x\n", 1135 __func__, ha->host_no, 1136 pd24->current_login_state, 1137 pd24->last_login_state, fcport->loop_id)); 1138 rval = QLA_FUNCTION_FAILED; 1139 goto gpd_error_out; 1140 } 1141 1142 /* Names are little-endian. */ 1143 memcpy(fcport->node_name, pd24->node_name, WWN_SIZE); 1144 memcpy(fcport->port_name, pd24->port_name, WWN_SIZE); 1145 1146 /* Get port_id of device. */ 1147 fcport->d_id.b.domain = pd24->port_id[0]; 1148 fcport->d_id.b.area = pd24->port_id[1]; 1149 fcport->d_id.b.al_pa = pd24->port_id[2]; 1150 fcport->d_id.b.rsvd_1 = 0; 1151 1152 /* If not target must be initiator or unknown type. */ 1153 if ((pd24->prli_svc_param_word_3[0] & BIT_4) == 0) 1154 fcport->port_type = FCT_INITIATOR; 1155 else 1156 fcport->port_type = FCT_TARGET; 1157 } else { 1158 /* Check for logged in state. */ 1159 if (pd->master_state != PD_STATE_PORT_LOGGED_IN && 1160 pd->slave_state != PD_STATE_PORT_LOGGED_IN) { 1161 rval = QLA_FUNCTION_FAILED; 1162 goto gpd_error_out; 1163 } 1164 1165 /* Names are little-endian. */ 1166 memcpy(fcport->node_name, pd->node_name, WWN_SIZE); 1167 memcpy(fcport->port_name, pd->port_name, WWN_SIZE); 1168 1169 /* Get port_id of device. */ 1170 fcport->d_id.b.domain = pd->port_id[0]; 1171 fcport->d_id.b.area = pd->port_id[3]; 1172 fcport->d_id.b.al_pa = pd->port_id[2]; 1173 fcport->d_id.b.rsvd_1 = 0; 1174 1175 /* Check for device require authentication. */ 1176 pd->common_features & BIT_5 ? (fcport->flags |= FCF_AUTH_REQ) : 1177 (fcport->flags &= ~FCF_AUTH_REQ); 1178 1179 /* If not target must be initiator or unknown type. */ 1180 if ((pd->prli_svc_param_word_3[0] & BIT_4) == 0) 1181 fcport->port_type = FCT_INITIATOR; 1182 else 1183 fcport->port_type = FCT_TARGET; 1184 1185 /* Passback COS information. */ 1186 fcport->supported_classes = (pd->options & BIT_4) ? 1187 FC_COS_CLASS2: FC_COS_CLASS3; 1188 } 1189 1190 gpd_error_out: 1191 dma_pool_free(ha->s_dma_pool, pd, pd_dma); 1192 1193 if (rval != QLA_SUCCESS) { 1194 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", 1195 __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1])); 1196 } else { 1197 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 1198 } 1199 1200 return rval; 1201 } 1202 1203 /* 1204 * qla2x00_get_firmware_state 1205 * Get adapter firmware state. 1206 * 1207 * Input: 1208 * ha = adapter block pointer. 1209 * dptr = pointer for firmware state. 1210 * TARGET_QUEUE_LOCK must be released. 1211 * ADAPTER_STATE_LOCK must be released. 1212 * 1213 * Returns: 1214 * qla2x00 local function return status code. 1215 * 1216 * Context: 1217 * Kernel context. 1218 */ 1219 int 1220 qla2x00_get_firmware_state(scsi_qla_host_t *ha, uint16_t *states) 1221 { 1222 int rval; 1223 mbx_cmd_t mc; 1224 mbx_cmd_t *mcp = &mc; 1225 1226 DEBUG11(printk("qla2x00_get_firmware_state(%ld): entered.\n", 1227 ha->host_no)); 1228 1229 mcp->mb[0] = MBC_GET_FIRMWARE_STATE; 1230 mcp->out_mb = MBX_0; 1231 mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0; 1232 mcp->tov = MBX_TOV_SECONDS; 1233 mcp->flags = 0; 1234 rval = qla2x00_mailbox_command(ha, mcp); 1235 1236 /* Return firmware states. */ 1237 states[0] = mcp->mb[1]; 1238 states[1] = mcp->mb[2]; 1239 states[2] = mcp->mb[3]; 1240 1241 if (rval != QLA_SUCCESS) { 1242 /*EMPTY*/ 1243 DEBUG2_3_11(printk("qla2x00_get_firmware_state(%ld): " 1244 "failed=%x.\n", ha->host_no, rval)); 1245 } else { 1246 /*EMPTY*/ 1247 DEBUG11(printk("qla2x00_get_firmware_state(%ld): done.\n", 1248 ha->host_no)); 1249 } 1250 1251 return rval; 1252 } 1253 1254 /* 1255 * qla2x00_get_port_name 1256 * Issue get port name mailbox command. 1257 * Returned name is in big endian format. 1258 * 1259 * Input: 1260 * ha = adapter block pointer. 1261 * loop_id = loop ID of device. 1262 * name = pointer for name. 1263 * TARGET_QUEUE_LOCK must be released. 1264 * ADAPTER_STATE_LOCK must be released. 1265 * 1266 * Returns: 1267 * qla2x00 local function return status code. 1268 * 1269 * Context: 1270 * Kernel context. 1271 */ 1272 int 1273 qla2x00_get_port_name(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t *name, 1274 uint8_t opt) 1275 { 1276 int rval; 1277 mbx_cmd_t mc; 1278 mbx_cmd_t *mcp = &mc; 1279 1280 DEBUG11(printk("qla2x00_get_port_name(%ld): entered.\n", 1281 ha->host_no)); 1282 1283 mcp->mb[0] = MBC_GET_PORT_NAME; 1284 mcp->mb[9] = ha->vp_idx; 1285 mcp->out_mb = MBX_9|MBX_1|MBX_0; 1286 if (HAS_EXTENDED_IDS(ha)) { 1287 mcp->mb[1] = loop_id; 1288 mcp->mb[10] = opt; 1289 mcp->out_mb |= MBX_10; 1290 } else { 1291 mcp->mb[1] = loop_id << 8 | opt; 1292 } 1293 1294 mcp->in_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; 1295 mcp->tov = MBX_TOV_SECONDS; 1296 mcp->flags = 0; 1297 rval = qla2x00_mailbox_command(ha, mcp); 1298 1299 if (rval != QLA_SUCCESS) { 1300 /*EMPTY*/ 1301 DEBUG2_3_11(printk("qla2x00_get_port_name(%ld): failed=%x.\n", 1302 ha->host_no, rval)); 1303 } else { 1304 if (name != NULL) { 1305 /* This function returns name in big endian. */ 1306 name[0] = MSB(mcp->mb[2]); 1307 name[1] = LSB(mcp->mb[2]); 1308 name[2] = MSB(mcp->mb[3]); 1309 name[3] = LSB(mcp->mb[3]); 1310 name[4] = MSB(mcp->mb[6]); 1311 name[5] = LSB(mcp->mb[6]); 1312 name[6] = MSB(mcp->mb[7]); 1313 name[7] = LSB(mcp->mb[7]); 1314 } 1315 1316 DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n", 1317 ha->host_no)); 1318 } 1319 1320 return rval; 1321 } 1322 1323 /* 1324 * qla2x00_lip_reset 1325 * Issue LIP reset mailbox command. 1326 * 1327 * Input: 1328 * ha = adapter block pointer. 1329 * TARGET_QUEUE_LOCK must be released. 1330 * ADAPTER_STATE_LOCK must be released. 1331 * 1332 * Returns: 1333 * qla2x00 local function return status code. 1334 * 1335 * Context: 1336 * Kernel context. 1337 */ 1338 int 1339 qla2x00_lip_reset(scsi_qla_host_t *ha) 1340 { 1341 int rval; 1342 mbx_cmd_t mc; 1343 mbx_cmd_t *mcp = &mc; 1344 1345 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 1346 1347 if (IS_FWI2_CAPABLE(ha)) { 1348 mcp->mb[0] = MBC_LIP_FULL_LOGIN; 1349 mcp->mb[1] = BIT_6; 1350 mcp->mb[2] = 0; 1351 mcp->mb[3] = ha->loop_reset_delay; 1352 mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; 1353 } else { 1354 mcp->mb[0] = MBC_LIP_RESET; 1355 mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; 1356 if (HAS_EXTENDED_IDS(ha)) { 1357 mcp->mb[1] = 0x00ff; 1358 mcp->mb[10] = 0; 1359 mcp->out_mb |= MBX_10; 1360 } else { 1361 mcp->mb[1] = 0xff00; 1362 } 1363 mcp->mb[2] = ha->loop_reset_delay; 1364 mcp->mb[3] = 0; 1365 } 1366 mcp->in_mb = MBX_0; 1367 mcp->tov = MBX_TOV_SECONDS; 1368 mcp->flags = 0; 1369 rval = qla2x00_mailbox_command(ha, mcp); 1370 1371 if (rval != QLA_SUCCESS) { 1372 /*EMPTY*/ 1373 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", 1374 __func__, ha->host_no, rval)); 1375 } else { 1376 /*EMPTY*/ 1377 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 1378 } 1379 1380 return rval; 1381 } 1382 1383 /* 1384 * qla2x00_send_sns 1385 * Send SNS command. 1386 * 1387 * Input: 1388 * ha = adapter block pointer. 1389 * sns = pointer for command. 1390 * cmd_size = command size. 1391 * buf_size = response/command size. 1392 * TARGET_QUEUE_LOCK must be released. 1393 * ADAPTER_STATE_LOCK must be released. 1394 * 1395 * Returns: 1396 * qla2x00 local function return status code. 1397 * 1398 * Context: 1399 * Kernel context. 1400 */ 1401 int 1402 qla2x00_send_sns(scsi_qla_host_t *ha, dma_addr_t sns_phys_address, 1403 uint16_t cmd_size, size_t buf_size) 1404 { 1405 int rval; 1406 mbx_cmd_t mc; 1407 mbx_cmd_t *mcp = &mc; 1408 1409 DEBUG11(printk("qla2x00_send_sns(%ld): entered.\n", 1410 ha->host_no)); 1411 1412 DEBUG11(printk("qla2x00_send_sns: retry cnt=%d ratov=%d total " 1413 "tov=%d.\n", ha->retry_count, ha->login_timeout, mcp->tov)); 1414 1415 mcp->mb[0] = MBC_SEND_SNS_COMMAND; 1416 mcp->mb[1] = cmd_size; 1417 mcp->mb[2] = MSW(sns_phys_address); 1418 mcp->mb[3] = LSW(sns_phys_address); 1419 mcp->mb[6] = MSW(MSD(sns_phys_address)); 1420 mcp->mb[7] = LSW(MSD(sns_phys_address)); 1421 mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; 1422 mcp->in_mb = MBX_0|MBX_1; 1423 mcp->buf_size = buf_size; 1424 mcp->flags = MBX_DMA_OUT|MBX_DMA_IN; 1425 mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2); 1426 rval = qla2x00_mailbox_command(ha, mcp); 1427 1428 if (rval != QLA_SUCCESS) { 1429 /*EMPTY*/ 1430 DEBUG(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x " 1431 "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1])); 1432 DEBUG2_3_11(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x " 1433 "mb[1]=%x.\n", ha->host_no, rval, mcp->mb[0], mcp->mb[1])); 1434 } else { 1435 /*EMPTY*/ 1436 DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", ha->host_no)); 1437 } 1438 1439 return rval; 1440 } 1441 1442 int 1443 qla24xx_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, 1444 uint8_t area, uint8_t al_pa, uint16_t *mb, uint8_t opt) 1445 { 1446 int rval; 1447 1448 struct logio_entry_24xx *lg; 1449 dma_addr_t lg_dma; 1450 uint32_t iop[2]; 1451 1452 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 1453 1454 lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma); 1455 if (lg == NULL) { 1456 DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n", 1457 __func__, ha->host_no)); 1458 return QLA_MEMORY_ALLOC_FAILED; 1459 } 1460 memset(lg, 0, sizeof(struct logio_entry_24xx)); 1461 1462 lg->entry_type = LOGINOUT_PORT_IOCB_TYPE; 1463 lg->entry_count = 1; 1464 lg->nport_handle = cpu_to_le16(loop_id); 1465 lg->control_flags = __constant_cpu_to_le16(LCF_COMMAND_PLOGI); 1466 if (opt & BIT_0) 1467 lg->control_flags |= __constant_cpu_to_le16(LCF_COND_PLOGI); 1468 if (opt & BIT_1) 1469 lg->control_flags |= __constant_cpu_to_le16(LCF_SKIP_PRLI); 1470 lg->port_id[0] = al_pa; 1471 lg->port_id[1] = area; 1472 lg->port_id[2] = domain; 1473 lg->vp_index = ha->vp_idx; 1474 rval = qla2x00_issue_iocb(ha, lg, lg_dma, 0); 1475 if (rval != QLA_SUCCESS) { 1476 DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB " 1477 "(%x).\n", __func__, ha->host_no, rval)); 1478 } else if (lg->entry_status != 0) { 1479 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 1480 "-- error status (%x).\n", __func__, ha->host_no, 1481 lg->entry_status)); 1482 rval = QLA_FUNCTION_FAILED; 1483 } else if (lg->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) { 1484 iop[0] = le32_to_cpu(lg->io_parameter[0]); 1485 iop[1] = le32_to_cpu(lg->io_parameter[1]); 1486 1487 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 1488 "-- completion status (%x) ioparam=%x/%x.\n", __func__, 1489 ha->host_no, le16_to_cpu(lg->comp_status), iop[0], 1490 iop[1])); 1491 1492 switch (iop[0]) { 1493 case LSC_SCODE_PORTID_USED: 1494 mb[0] = MBS_PORT_ID_USED; 1495 mb[1] = LSW(iop[1]); 1496 break; 1497 case LSC_SCODE_NPORT_USED: 1498 mb[0] = MBS_LOOP_ID_USED; 1499 break; 1500 case LSC_SCODE_NOLINK: 1501 case LSC_SCODE_NOIOCB: 1502 case LSC_SCODE_NOXCB: 1503 case LSC_SCODE_CMD_FAILED: 1504 case LSC_SCODE_NOFABRIC: 1505 case LSC_SCODE_FW_NOT_READY: 1506 case LSC_SCODE_NOT_LOGGED_IN: 1507 case LSC_SCODE_NOPCB: 1508 case LSC_SCODE_ELS_REJECT: 1509 case LSC_SCODE_CMD_PARAM_ERR: 1510 case LSC_SCODE_NONPORT: 1511 case LSC_SCODE_LOGGED_IN: 1512 case LSC_SCODE_NOFLOGI_ACC: 1513 default: 1514 mb[0] = MBS_COMMAND_ERROR; 1515 break; 1516 } 1517 } else { 1518 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 1519 1520 iop[0] = le32_to_cpu(lg->io_parameter[0]); 1521 1522 mb[0] = MBS_COMMAND_COMPLETE; 1523 mb[1] = 0; 1524 if (iop[0] & BIT_4) { 1525 if (iop[0] & BIT_8) 1526 mb[1] |= BIT_1; 1527 } else 1528 mb[1] = BIT_0; 1529 1530 /* Passback COS information. */ 1531 mb[10] = 0; 1532 if (lg->io_parameter[7] || lg->io_parameter[8]) 1533 mb[10] |= BIT_0; /* Class 2. */ 1534 if (lg->io_parameter[9] || lg->io_parameter[10]) 1535 mb[10] |= BIT_1; /* Class 3. */ 1536 } 1537 1538 dma_pool_free(ha->s_dma_pool, lg, lg_dma); 1539 1540 return rval; 1541 } 1542 1543 /* 1544 * qla2x00_login_fabric 1545 * Issue login fabric port mailbox command. 1546 * 1547 * Input: 1548 * ha = adapter block pointer. 1549 * loop_id = device loop ID. 1550 * domain = device domain. 1551 * area = device area. 1552 * al_pa = device AL_PA. 1553 * status = pointer for return status. 1554 * opt = command options. 1555 * TARGET_QUEUE_LOCK must be released. 1556 * ADAPTER_STATE_LOCK must be released. 1557 * 1558 * Returns: 1559 * qla2x00 local function return status code. 1560 * 1561 * Context: 1562 * Kernel context. 1563 */ 1564 int 1565 qla2x00_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, 1566 uint8_t area, uint8_t al_pa, uint16_t *mb, uint8_t opt) 1567 { 1568 int rval; 1569 mbx_cmd_t mc; 1570 mbx_cmd_t *mcp = &mc; 1571 1572 DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", ha->host_no)); 1573 1574 mcp->mb[0] = MBC_LOGIN_FABRIC_PORT; 1575 mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; 1576 if (HAS_EXTENDED_IDS(ha)) { 1577 mcp->mb[1] = loop_id; 1578 mcp->mb[10] = opt; 1579 mcp->out_mb |= MBX_10; 1580 } else { 1581 mcp->mb[1] = (loop_id << 8) | opt; 1582 } 1583 mcp->mb[2] = domain; 1584 mcp->mb[3] = area << 8 | al_pa; 1585 1586 mcp->in_mb = MBX_7|MBX_6|MBX_2|MBX_1|MBX_0; 1587 mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2); 1588 mcp->flags = 0; 1589 rval = qla2x00_mailbox_command(ha, mcp); 1590 1591 /* Return mailbox statuses. */ 1592 if (mb != NULL) { 1593 mb[0] = mcp->mb[0]; 1594 mb[1] = mcp->mb[1]; 1595 mb[2] = mcp->mb[2]; 1596 mb[6] = mcp->mb[6]; 1597 mb[7] = mcp->mb[7]; 1598 /* COS retrieved from Get-Port-Database mailbox command. */ 1599 mb[10] = 0; 1600 } 1601 1602 if (rval != QLA_SUCCESS) { 1603 /* RLU tmp code: need to change main mailbox_command function to 1604 * return ok even when the mailbox completion value is not 1605 * SUCCESS. The caller needs to be responsible to interpret 1606 * the return values of this mailbox command if we're not 1607 * to change too much of the existing code. 1608 */ 1609 if (mcp->mb[0] == 0x4001 || mcp->mb[0] == 0x4002 || 1610 mcp->mb[0] == 0x4003 || mcp->mb[0] == 0x4005 || 1611 mcp->mb[0] == 0x4006) 1612 rval = QLA_SUCCESS; 1613 1614 /*EMPTY*/ 1615 DEBUG2_3_11(printk("qla2x00_login_fabric(%ld): failed=%x " 1616 "mb[0]=%x mb[1]=%x mb[2]=%x.\n", ha->host_no, rval, 1617 mcp->mb[0], mcp->mb[1], mcp->mb[2])); 1618 } else { 1619 /*EMPTY*/ 1620 DEBUG11(printk("qla2x00_login_fabric(%ld): done.\n", 1621 ha->host_no)); 1622 } 1623 1624 return rval; 1625 } 1626 1627 /* 1628 * qla2x00_login_local_device 1629 * Issue login loop port mailbox command. 1630 * 1631 * Input: 1632 * ha = adapter block pointer. 1633 * loop_id = device loop ID. 1634 * opt = command options. 1635 * 1636 * Returns: 1637 * Return status code. 1638 * 1639 * Context: 1640 * Kernel context. 1641 * 1642 */ 1643 int 1644 qla2x00_login_local_device(scsi_qla_host_t *ha, fc_port_t *fcport, 1645 uint16_t *mb_ret, uint8_t opt) 1646 { 1647 int rval; 1648 mbx_cmd_t mc; 1649 mbx_cmd_t *mcp = &mc; 1650 1651 if (IS_FWI2_CAPABLE(ha)) 1652 return qla24xx_login_fabric(ha, fcport->loop_id, 1653 fcport->d_id.b.domain, fcport->d_id.b.area, 1654 fcport->d_id.b.al_pa, mb_ret, opt); 1655 1656 DEBUG3(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 1657 1658 mcp->mb[0] = MBC_LOGIN_LOOP_PORT; 1659 if (HAS_EXTENDED_IDS(ha)) 1660 mcp->mb[1] = fcport->loop_id; 1661 else 1662 mcp->mb[1] = fcport->loop_id << 8; 1663 mcp->mb[2] = opt; 1664 mcp->out_mb = MBX_2|MBX_1|MBX_0; 1665 mcp->in_mb = MBX_7|MBX_6|MBX_1|MBX_0; 1666 mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2); 1667 mcp->flags = 0; 1668 rval = qla2x00_mailbox_command(ha, mcp); 1669 1670 /* Return mailbox statuses. */ 1671 if (mb_ret != NULL) { 1672 mb_ret[0] = mcp->mb[0]; 1673 mb_ret[1] = mcp->mb[1]; 1674 mb_ret[6] = mcp->mb[6]; 1675 mb_ret[7] = mcp->mb[7]; 1676 } 1677 1678 if (rval != QLA_SUCCESS) { 1679 /* AV tmp code: need to change main mailbox_command function to 1680 * return ok even when the mailbox completion value is not 1681 * SUCCESS. The caller needs to be responsible to interpret 1682 * the return values of this mailbox command if we're not 1683 * to change too much of the existing code. 1684 */ 1685 if (mcp->mb[0] == 0x4005 || mcp->mb[0] == 0x4006) 1686 rval = QLA_SUCCESS; 1687 1688 DEBUG(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x " 1689 "mb[6]=%x mb[7]=%x.\n", __func__, ha->host_no, rval, 1690 mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7])); 1691 DEBUG2_3(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x " 1692 "mb[6]=%x mb[7]=%x.\n", __func__, ha->host_no, rval, 1693 mcp->mb[0], mcp->mb[1], mcp->mb[6], mcp->mb[7])); 1694 } else { 1695 /*EMPTY*/ 1696 DEBUG3(printk("%s(%ld): done.\n", __func__, ha->host_no)); 1697 } 1698 1699 return (rval); 1700 } 1701 1702 int 1703 qla24xx_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, 1704 uint8_t area, uint8_t al_pa) 1705 { 1706 int rval; 1707 struct logio_entry_24xx *lg; 1708 dma_addr_t lg_dma; 1709 1710 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 1711 1712 lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma); 1713 if (lg == NULL) { 1714 DEBUG2_3(printk("%s(%ld): failed to allocate Logout IOCB.\n", 1715 __func__, ha->host_no)); 1716 return QLA_MEMORY_ALLOC_FAILED; 1717 } 1718 memset(lg, 0, sizeof(struct logio_entry_24xx)); 1719 1720 lg->entry_type = LOGINOUT_PORT_IOCB_TYPE; 1721 lg->entry_count = 1; 1722 lg->nport_handle = cpu_to_le16(loop_id); 1723 lg->control_flags = 1724 __constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO); 1725 lg->port_id[0] = al_pa; 1726 lg->port_id[1] = area; 1727 lg->port_id[2] = domain; 1728 lg->vp_index = ha->vp_idx; 1729 rval = qla2x00_issue_iocb(ha, lg, lg_dma, 0); 1730 if (rval != QLA_SUCCESS) { 1731 DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB " 1732 "(%x).\n", __func__, ha->host_no, rval)); 1733 } else if (lg->entry_status != 0) { 1734 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 1735 "-- error status (%x).\n", __func__, ha->host_no, 1736 lg->entry_status)); 1737 rval = QLA_FUNCTION_FAILED; 1738 } else if (lg->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) { 1739 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 1740 "-- completion status (%x) ioparam=%x/%x.\n", __func__, 1741 ha->host_no, le16_to_cpu(lg->comp_status), 1742 le32_to_cpu(lg->io_parameter[0]), 1743 le32_to_cpu(lg->io_parameter[1]))); 1744 } else { 1745 /*EMPTY*/ 1746 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 1747 } 1748 1749 dma_pool_free(ha->s_dma_pool, lg, lg_dma); 1750 1751 return rval; 1752 } 1753 1754 /* 1755 * qla2x00_fabric_logout 1756 * Issue logout fabric port mailbox command. 1757 * 1758 * Input: 1759 * ha = adapter block pointer. 1760 * loop_id = device loop ID. 1761 * TARGET_QUEUE_LOCK must be released. 1762 * ADAPTER_STATE_LOCK must be released. 1763 * 1764 * Returns: 1765 * qla2x00 local function return status code. 1766 * 1767 * Context: 1768 * Kernel context. 1769 */ 1770 int 1771 qla2x00_fabric_logout(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, 1772 uint8_t area, uint8_t al_pa) 1773 { 1774 int rval; 1775 mbx_cmd_t mc; 1776 mbx_cmd_t *mcp = &mc; 1777 1778 DEBUG11(printk("qla2x00_fabric_logout(%ld): entered.\n", 1779 ha->host_no)); 1780 1781 mcp->mb[0] = MBC_LOGOUT_FABRIC_PORT; 1782 mcp->out_mb = MBX_1|MBX_0; 1783 if (HAS_EXTENDED_IDS(ha)) { 1784 mcp->mb[1] = loop_id; 1785 mcp->mb[10] = 0; 1786 mcp->out_mb |= MBX_10; 1787 } else { 1788 mcp->mb[1] = loop_id << 8; 1789 } 1790 1791 mcp->in_mb = MBX_1|MBX_0; 1792 mcp->tov = MBX_TOV_SECONDS; 1793 mcp->flags = 0; 1794 rval = qla2x00_mailbox_command(ha, mcp); 1795 1796 if (rval != QLA_SUCCESS) { 1797 /*EMPTY*/ 1798 DEBUG2_3_11(printk("qla2x00_fabric_logout(%ld): failed=%x " 1799 "mbx1=%x.\n", ha->host_no, rval, mcp->mb[1])); 1800 } else { 1801 /*EMPTY*/ 1802 DEBUG11(printk("qla2x00_fabric_logout(%ld): done.\n", 1803 ha->host_no)); 1804 } 1805 1806 return rval; 1807 } 1808 1809 /* 1810 * qla2x00_full_login_lip 1811 * Issue full login LIP mailbox command. 1812 * 1813 * Input: 1814 * ha = adapter block pointer. 1815 * TARGET_QUEUE_LOCK must be released. 1816 * ADAPTER_STATE_LOCK must be released. 1817 * 1818 * Returns: 1819 * qla2x00 local function return status code. 1820 * 1821 * Context: 1822 * Kernel context. 1823 */ 1824 int 1825 qla2x00_full_login_lip(scsi_qla_host_t *ha) 1826 { 1827 int rval; 1828 mbx_cmd_t mc; 1829 mbx_cmd_t *mcp = &mc; 1830 1831 DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n", 1832 ha->host_no)); 1833 1834 mcp->mb[0] = MBC_LIP_FULL_LOGIN; 1835 mcp->mb[1] = IS_FWI2_CAPABLE(ha) ? BIT_3: 0; 1836 mcp->mb[2] = 0; 1837 mcp->mb[3] = 0; 1838 mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0; 1839 mcp->in_mb = MBX_0; 1840 mcp->tov = MBX_TOV_SECONDS; 1841 mcp->flags = 0; 1842 rval = qla2x00_mailbox_command(ha, mcp); 1843 1844 if (rval != QLA_SUCCESS) { 1845 /*EMPTY*/ 1846 DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n", 1847 ha->host_no, rval)); 1848 } else { 1849 /*EMPTY*/ 1850 DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n", 1851 ha->host_no)); 1852 } 1853 1854 return rval; 1855 } 1856 1857 /* 1858 * qla2x00_get_id_list 1859 * 1860 * Input: 1861 * ha = adapter block pointer. 1862 * 1863 * Returns: 1864 * qla2x00 local function return status code. 1865 * 1866 * Context: 1867 * Kernel context. 1868 */ 1869 int 1870 qla2x00_get_id_list(scsi_qla_host_t *ha, void *id_list, dma_addr_t id_list_dma, 1871 uint16_t *entries) 1872 { 1873 int rval; 1874 mbx_cmd_t mc; 1875 mbx_cmd_t *mcp = &mc; 1876 1877 DEBUG11(printk("qla2x00_get_id_list(%ld): entered.\n", 1878 ha->host_no)); 1879 1880 if (id_list == NULL) 1881 return QLA_FUNCTION_FAILED; 1882 1883 mcp->mb[0] = MBC_GET_ID_LIST; 1884 mcp->out_mb = MBX_0; 1885 if (IS_FWI2_CAPABLE(ha)) { 1886 mcp->mb[2] = MSW(id_list_dma); 1887 mcp->mb[3] = LSW(id_list_dma); 1888 mcp->mb[6] = MSW(MSD(id_list_dma)); 1889 mcp->mb[7] = LSW(MSD(id_list_dma)); 1890 mcp->mb[8] = 0; 1891 mcp->mb[9] = ha->vp_idx; 1892 mcp->out_mb |= MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2; 1893 } else { 1894 mcp->mb[1] = MSW(id_list_dma); 1895 mcp->mb[2] = LSW(id_list_dma); 1896 mcp->mb[3] = MSW(MSD(id_list_dma)); 1897 mcp->mb[6] = LSW(MSD(id_list_dma)); 1898 mcp->out_mb |= MBX_6|MBX_3|MBX_2|MBX_1; 1899 } 1900 mcp->in_mb = MBX_1|MBX_0; 1901 mcp->tov = MBX_TOV_SECONDS; 1902 mcp->flags = 0; 1903 rval = qla2x00_mailbox_command(ha, mcp); 1904 1905 if (rval != QLA_SUCCESS) { 1906 /*EMPTY*/ 1907 DEBUG2_3_11(printk("qla2x00_get_id_list(%ld): failed=%x.\n", 1908 ha->host_no, rval)); 1909 } else { 1910 *entries = mcp->mb[1]; 1911 DEBUG11(printk("qla2x00_get_id_list(%ld): done.\n", 1912 ha->host_no)); 1913 } 1914 1915 return rval; 1916 } 1917 1918 /* 1919 * qla2x00_get_resource_cnts 1920 * Get current firmware resource counts. 1921 * 1922 * Input: 1923 * ha = adapter block pointer. 1924 * 1925 * Returns: 1926 * qla2x00 local function return status code. 1927 * 1928 * Context: 1929 * Kernel context. 1930 */ 1931 int 1932 qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt, 1933 uint16_t *orig_xchg_cnt, uint16_t *cur_iocb_cnt, 1934 uint16_t *orig_iocb_cnt, uint16_t *max_npiv_vports) 1935 { 1936 int rval; 1937 mbx_cmd_t mc; 1938 mbx_cmd_t *mcp = &mc; 1939 1940 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 1941 1942 mcp->mb[0] = MBC_GET_RESOURCE_COUNTS; 1943 mcp->out_mb = MBX_0; 1944 mcp->in_mb = MBX_11|MBX_10|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; 1945 mcp->tov = MBX_TOV_SECONDS; 1946 mcp->flags = 0; 1947 rval = qla2x00_mailbox_command(ha, mcp); 1948 1949 if (rval != QLA_SUCCESS) { 1950 /*EMPTY*/ 1951 DEBUG2_3_11(printk("%s(%ld): failed = %x.\n", __func__, 1952 ha->host_no, mcp->mb[0])); 1953 } else { 1954 DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x " 1955 "mb7=%x mb10=%x mb11=%x.\n", __func__, ha->host_no, 1956 mcp->mb[1], mcp->mb[2], mcp->mb[3], mcp->mb[6], mcp->mb[7], 1957 mcp->mb[10], mcp->mb[11])); 1958 1959 if (cur_xchg_cnt) 1960 *cur_xchg_cnt = mcp->mb[3]; 1961 if (orig_xchg_cnt) 1962 *orig_xchg_cnt = mcp->mb[6]; 1963 if (cur_iocb_cnt) 1964 *cur_iocb_cnt = mcp->mb[7]; 1965 if (orig_iocb_cnt) 1966 *orig_iocb_cnt = mcp->mb[10]; 1967 if (max_npiv_vports) 1968 *max_npiv_vports = mcp->mb[11]; 1969 } 1970 1971 return (rval); 1972 } 1973 1974 #if defined(QL_DEBUG_LEVEL_3) 1975 /* 1976 * qla2x00_get_fcal_position_map 1977 * Get FCAL (LILP) position map using mailbox command 1978 * 1979 * Input: 1980 * ha = adapter state pointer. 1981 * pos_map = buffer pointer (can be NULL). 1982 * 1983 * Returns: 1984 * qla2x00 local function return status code. 1985 * 1986 * Context: 1987 * Kernel context. 1988 */ 1989 int 1990 qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map) 1991 { 1992 int rval; 1993 mbx_cmd_t mc; 1994 mbx_cmd_t *mcp = &mc; 1995 char *pmap; 1996 dma_addr_t pmap_dma; 1997 1998 pmap = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &pmap_dma); 1999 if (pmap == NULL) { 2000 DEBUG2_3_11(printk("%s(%ld): **** Mem Alloc Failed ****", 2001 __func__, ha->host_no)); 2002 return QLA_MEMORY_ALLOC_FAILED; 2003 } 2004 memset(pmap, 0, FCAL_MAP_SIZE); 2005 2006 mcp->mb[0] = MBC_GET_FC_AL_POSITION_MAP; 2007 mcp->mb[2] = MSW(pmap_dma); 2008 mcp->mb[3] = LSW(pmap_dma); 2009 mcp->mb[6] = MSW(MSD(pmap_dma)); 2010 mcp->mb[7] = LSW(MSD(pmap_dma)); 2011 mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; 2012 mcp->in_mb = MBX_1|MBX_0; 2013 mcp->buf_size = FCAL_MAP_SIZE; 2014 mcp->flags = MBX_DMA_IN; 2015 mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2); 2016 rval = qla2x00_mailbox_command(ha, mcp); 2017 2018 if (rval == QLA_SUCCESS) { 2019 DEBUG11(printk("%s(%ld): (mb0=%x/mb1=%x) FC/AL Position Map " 2020 "size (%x)\n", __func__, ha->host_no, mcp->mb[0], 2021 mcp->mb[1], (unsigned)pmap[0])); 2022 DEBUG11(qla2x00_dump_buffer(pmap, pmap[0] + 1)); 2023 2024 if (pos_map) 2025 memcpy(pos_map, pmap, FCAL_MAP_SIZE); 2026 } 2027 dma_pool_free(ha->s_dma_pool, pmap, pmap_dma); 2028 2029 if (rval != QLA_SUCCESS) { 2030 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, 2031 ha->host_no, rval)); 2032 } else { 2033 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2034 } 2035 2036 return rval; 2037 } 2038 #endif 2039 2040 /* 2041 * qla2x00_get_link_status 2042 * 2043 * Input: 2044 * ha = adapter block pointer. 2045 * loop_id = device loop ID. 2046 * ret_buf = pointer to link status return buffer. 2047 * 2048 * Returns: 2049 * 0 = success. 2050 * BIT_0 = mem alloc error. 2051 * BIT_1 = mailbox error. 2052 */ 2053 int 2054 qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id, 2055 struct link_statistics *stats, dma_addr_t stats_dma) 2056 { 2057 int rval; 2058 mbx_cmd_t mc; 2059 mbx_cmd_t *mcp = &mc; 2060 uint32_t *siter, *diter, dwords; 2061 2062 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2063 2064 mcp->mb[0] = MBC_GET_LINK_STATUS; 2065 mcp->mb[2] = MSW(stats_dma); 2066 mcp->mb[3] = LSW(stats_dma); 2067 mcp->mb[6] = MSW(MSD(stats_dma)); 2068 mcp->mb[7] = LSW(MSD(stats_dma)); 2069 mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; 2070 mcp->in_mb = MBX_0; 2071 if (IS_FWI2_CAPABLE(ha)) { 2072 mcp->mb[1] = loop_id; 2073 mcp->mb[4] = 0; 2074 mcp->mb[10] = 0; 2075 mcp->out_mb |= MBX_10|MBX_4|MBX_1; 2076 mcp->in_mb |= MBX_1; 2077 } else if (HAS_EXTENDED_IDS(ha)) { 2078 mcp->mb[1] = loop_id; 2079 mcp->mb[10] = 0; 2080 mcp->out_mb |= MBX_10|MBX_1; 2081 } else { 2082 mcp->mb[1] = loop_id << 8; 2083 mcp->out_mb |= MBX_1; 2084 } 2085 mcp->tov = MBX_TOV_SECONDS; 2086 mcp->flags = IOCTL_CMD; 2087 rval = qla2x00_mailbox_command(ha, mcp); 2088 2089 if (rval == QLA_SUCCESS) { 2090 if (mcp->mb[0] != MBS_COMMAND_COMPLETE) { 2091 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n", 2092 __func__, ha->host_no, mcp->mb[0])); 2093 rval = QLA_FUNCTION_FAILED; 2094 } else { 2095 /* Copy over data -- firmware data is LE. */ 2096 dwords = offsetof(struct link_statistics, unused1) / 4; 2097 siter = diter = &stats->link_fail_cnt; 2098 while (dwords--) 2099 *diter++ = le32_to_cpu(*siter++); 2100 } 2101 } else { 2102 /* Failed. */ 2103 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, 2104 ha->host_no, rval)); 2105 } 2106 2107 return rval; 2108 } 2109 2110 int 2111 qla24xx_get_isp_stats(scsi_qla_host_t *ha, struct link_statistics *stats, 2112 dma_addr_t stats_dma) 2113 { 2114 int rval; 2115 mbx_cmd_t mc; 2116 mbx_cmd_t *mcp = &mc; 2117 uint32_t *siter, *diter, dwords; 2118 2119 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2120 2121 mcp->mb[0] = MBC_GET_LINK_PRIV_STATS; 2122 mcp->mb[2] = MSW(stats_dma); 2123 mcp->mb[3] = LSW(stats_dma); 2124 mcp->mb[6] = MSW(MSD(stats_dma)); 2125 mcp->mb[7] = LSW(MSD(stats_dma)); 2126 mcp->mb[8] = sizeof(struct link_statistics) / 4; 2127 mcp->mb[9] = ha->vp_idx; 2128 mcp->mb[10] = 0; 2129 mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; 2130 mcp->in_mb = MBX_2|MBX_1|MBX_0; 2131 mcp->tov = MBX_TOV_SECONDS; 2132 mcp->flags = IOCTL_CMD; 2133 rval = qla2x00_mailbox_command(ha, mcp); 2134 2135 if (rval == QLA_SUCCESS) { 2136 if (mcp->mb[0] != MBS_COMMAND_COMPLETE) { 2137 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n", 2138 __func__, ha->host_no, mcp->mb[0])); 2139 rval = QLA_FUNCTION_FAILED; 2140 } else { 2141 /* Copy over data -- firmware data is LE. */ 2142 dwords = sizeof(struct link_statistics) / 4; 2143 siter = diter = &stats->link_fail_cnt; 2144 while (dwords--) 2145 *diter++ = le32_to_cpu(*siter++); 2146 } 2147 } else { 2148 /* Failed. */ 2149 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, 2150 ha->host_no, rval)); 2151 } 2152 2153 return rval; 2154 } 2155 2156 int 2157 qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp) 2158 { 2159 int rval; 2160 fc_port_t *fcport; 2161 unsigned long flags = 0; 2162 2163 struct abort_entry_24xx *abt; 2164 dma_addr_t abt_dma; 2165 uint32_t handle; 2166 scsi_qla_host_t *pha = to_qla_parent(ha); 2167 2168 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2169 2170 fcport = sp->fcport; 2171 2172 spin_lock_irqsave(&pha->hardware_lock, flags); 2173 for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) { 2174 if (pha->outstanding_cmds[handle] == sp) 2175 break; 2176 } 2177 spin_unlock_irqrestore(&pha->hardware_lock, flags); 2178 if (handle == MAX_OUTSTANDING_COMMANDS) { 2179 /* Command not found. */ 2180 return QLA_FUNCTION_FAILED; 2181 } 2182 2183 abt = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &abt_dma); 2184 if (abt == NULL) { 2185 DEBUG2_3(printk("%s(%ld): failed to allocate Abort IOCB.\n", 2186 __func__, ha->host_no)); 2187 return QLA_MEMORY_ALLOC_FAILED; 2188 } 2189 memset(abt, 0, sizeof(struct abort_entry_24xx)); 2190 2191 abt->entry_type = ABORT_IOCB_TYPE; 2192 abt->entry_count = 1; 2193 abt->nport_handle = cpu_to_le16(fcport->loop_id); 2194 abt->handle_to_abort = handle; 2195 abt->port_id[0] = fcport->d_id.b.al_pa; 2196 abt->port_id[1] = fcport->d_id.b.area; 2197 abt->port_id[2] = fcport->d_id.b.domain; 2198 abt->vp_index = fcport->vp_idx; 2199 rval = qla2x00_issue_iocb(ha, abt, abt_dma, 0); 2200 if (rval != QLA_SUCCESS) { 2201 DEBUG2_3_11(printk("%s(%ld): failed to issue IOCB (%x).\n", 2202 __func__, ha->host_no, rval)); 2203 } else if (abt->entry_status != 0) { 2204 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 2205 "-- error status (%x).\n", __func__, ha->host_no, 2206 abt->entry_status)); 2207 rval = QLA_FUNCTION_FAILED; 2208 } else if (abt->nport_handle != __constant_cpu_to_le16(0)) { 2209 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 2210 "-- completion status (%x).\n", __func__, ha->host_no, 2211 le16_to_cpu(abt->nport_handle))); 2212 rval = QLA_FUNCTION_FAILED; 2213 } else { 2214 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2215 } 2216 2217 dma_pool_free(ha->s_dma_pool, abt, abt_dma); 2218 2219 return rval; 2220 } 2221 2222 struct tsk_mgmt_cmd { 2223 union { 2224 struct tsk_mgmt_entry tsk; 2225 struct sts_entry_24xx sts; 2226 } p; 2227 }; 2228 2229 static int 2230 __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport, 2231 unsigned int l) 2232 { 2233 int rval, rval2; 2234 struct tsk_mgmt_cmd *tsk; 2235 dma_addr_t tsk_dma; 2236 scsi_qla_host_t *ha, *pha; 2237 2238 DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->ha->host_no)); 2239 2240 ha = fcport->ha; 2241 pha = to_qla_parent(ha); 2242 tsk = dma_pool_alloc(pha->s_dma_pool, GFP_KERNEL, &tsk_dma); 2243 if (tsk == NULL) { 2244 DEBUG2_3(printk("%s(%ld): failed to allocate Task Management " 2245 "IOCB.\n", __func__, ha->host_no)); 2246 return QLA_MEMORY_ALLOC_FAILED; 2247 } 2248 memset(tsk, 0, sizeof(struct tsk_mgmt_cmd)); 2249 2250 tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE; 2251 tsk->p.tsk.entry_count = 1; 2252 tsk->p.tsk.nport_handle = cpu_to_le16(fcport->loop_id); 2253 tsk->p.tsk.timeout = cpu_to_le16(ha->r_a_tov / 10 * 2); 2254 tsk->p.tsk.control_flags = cpu_to_le32(type); 2255 tsk->p.tsk.port_id[0] = fcport->d_id.b.al_pa; 2256 tsk->p.tsk.port_id[1] = fcport->d_id.b.area; 2257 tsk->p.tsk.port_id[2] = fcport->d_id.b.domain; 2258 tsk->p.tsk.vp_index = fcport->vp_idx; 2259 if (type == TCF_LUN_RESET) { 2260 int_to_scsilun(l, &tsk->p.tsk.lun); 2261 host_to_fcp_swap((uint8_t *)&tsk->p.tsk.lun, 2262 sizeof(tsk->p.tsk.lun)); 2263 } 2264 2265 rval = qla2x00_issue_iocb(ha, tsk, tsk_dma, 0); 2266 if (rval != QLA_SUCCESS) { 2267 DEBUG2_3_11(printk("%s(%ld): failed to issue %s Reset IOCB " 2268 "(%x).\n", __func__, ha->host_no, name, rval)); 2269 } else if (tsk->p.sts.entry_status != 0) { 2270 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 2271 "-- error status (%x).\n", __func__, ha->host_no, 2272 tsk->p.sts.entry_status)); 2273 rval = QLA_FUNCTION_FAILED; 2274 } else if (tsk->p.sts.comp_status != 2275 __constant_cpu_to_le16(CS_COMPLETE)) { 2276 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 2277 "-- completion status (%x).\n", __func__, 2278 ha->host_no, le16_to_cpu(tsk->p.sts.comp_status))); 2279 rval = QLA_FUNCTION_FAILED; 2280 } 2281 2282 /* Issue marker IOCB. */ 2283 rval2 = qla2x00_marker(ha, fcport->loop_id, l, 2284 type == TCF_LUN_RESET ? MK_SYNC_ID_LUN: MK_SYNC_ID); 2285 if (rval2 != QLA_SUCCESS) { 2286 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB " 2287 "(%x).\n", __func__, ha->host_no, rval2)); 2288 } else { 2289 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2290 } 2291 2292 dma_pool_free(pha->s_dma_pool, tsk, tsk_dma); 2293 2294 return rval; 2295 } 2296 2297 int 2298 qla24xx_abort_target(struct fc_port *fcport, unsigned int l) 2299 { 2300 return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET, fcport, l); 2301 } 2302 2303 int 2304 qla24xx_lun_reset(struct fc_port *fcport, unsigned int l) 2305 { 2306 return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l); 2307 } 2308 2309 int 2310 qla2x00_system_error(scsi_qla_host_t *ha) 2311 { 2312 int rval; 2313 mbx_cmd_t mc; 2314 mbx_cmd_t *mcp = &mc; 2315 2316 if (!IS_QLA23XX(ha) && !IS_FWI2_CAPABLE(ha)) 2317 return QLA_FUNCTION_FAILED; 2318 2319 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2320 2321 mcp->mb[0] = MBC_GEN_SYSTEM_ERROR; 2322 mcp->out_mb = MBX_0; 2323 mcp->in_mb = MBX_0; 2324 mcp->tov = 5; 2325 mcp->flags = 0; 2326 rval = qla2x00_mailbox_command(ha, mcp); 2327 2328 if (rval != QLA_SUCCESS) { 2329 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, 2330 ha->host_no, rval)); 2331 } else { 2332 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2333 } 2334 2335 return rval; 2336 } 2337 2338 /** 2339 * qla2x00_set_serdes_params() - 2340 * @ha: HA context 2341 * 2342 * Returns 2343 */ 2344 int 2345 qla2x00_set_serdes_params(scsi_qla_host_t *ha, uint16_t sw_em_1g, 2346 uint16_t sw_em_2g, uint16_t sw_em_4g) 2347 { 2348 int rval; 2349 mbx_cmd_t mc; 2350 mbx_cmd_t *mcp = &mc; 2351 2352 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2353 2354 mcp->mb[0] = MBC_SERDES_PARAMS; 2355 mcp->mb[1] = BIT_0; 2356 mcp->mb[2] = sw_em_1g | BIT_15; 2357 mcp->mb[3] = sw_em_2g | BIT_15; 2358 mcp->mb[4] = sw_em_4g | BIT_15; 2359 mcp->out_mb = MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; 2360 mcp->in_mb = MBX_0; 2361 mcp->tov = MBX_TOV_SECONDS; 2362 mcp->flags = 0; 2363 rval = qla2x00_mailbox_command(ha, mcp); 2364 2365 if (rval != QLA_SUCCESS) { 2366 /*EMPTY*/ 2367 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, 2368 ha->host_no, rval, mcp->mb[0])); 2369 } else { 2370 /*EMPTY*/ 2371 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2372 } 2373 2374 return rval; 2375 } 2376 2377 int 2378 qla2x00_stop_firmware(scsi_qla_host_t *ha) 2379 { 2380 int rval; 2381 mbx_cmd_t mc; 2382 mbx_cmd_t *mcp = &mc; 2383 2384 if (!IS_FWI2_CAPABLE(ha)) 2385 return QLA_FUNCTION_FAILED; 2386 2387 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2388 2389 mcp->mb[0] = MBC_STOP_FIRMWARE; 2390 mcp->out_mb = MBX_0; 2391 mcp->in_mb = MBX_0; 2392 mcp->tov = 5; 2393 mcp->flags = 0; 2394 rval = qla2x00_mailbox_command(ha, mcp); 2395 2396 if (rval != QLA_SUCCESS) { 2397 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, 2398 ha->host_no, rval)); 2399 } else { 2400 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2401 } 2402 2403 return rval; 2404 } 2405 2406 int 2407 qla2x00_enable_eft_trace(scsi_qla_host_t *ha, dma_addr_t eft_dma, 2408 uint16_t buffers) 2409 { 2410 int rval; 2411 mbx_cmd_t mc; 2412 mbx_cmd_t *mcp = &mc; 2413 2414 if (!IS_FWI2_CAPABLE(ha)) 2415 return QLA_FUNCTION_FAILED; 2416 2417 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2418 2419 mcp->mb[0] = MBC_TRACE_CONTROL; 2420 mcp->mb[1] = TC_EFT_ENABLE; 2421 mcp->mb[2] = LSW(eft_dma); 2422 mcp->mb[3] = MSW(eft_dma); 2423 mcp->mb[4] = LSW(MSD(eft_dma)); 2424 mcp->mb[5] = MSW(MSD(eft_dma)); 2425 mcp->mb[6] = buffers; 2426 mcp->mb[7] = TC_AEN_DISABLE; 2427 mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; 2428 mcp->in_mb = MBX_1|MBX_0; 2429 mcp->tov = MBX_TOV_SECONDS; 2430 mcp->flags = 0; 2431 rval = qla2x00_mailbox_command(ha, mcp); 2432 if (rval != QLA_SUCCESS) { 2433 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", 2434 __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1])); 2435 } else { 2436 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2437 } 2438 2439 return rval; 2440 } 2441 2442 int 2443 qla2x00_disable_eft_trace(scsi_qla_host_t *ha) 2444 { 2445 int rval; 2446 mbx_cmd_t mc; 2447 mbx_cmd_t *mcp = &mc; 2448 2449 if (!IS_FWI2_CAPABLE(ha)) 2450 return QLA_FUNCTION_FAILED; 2451 2452 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2453 2454 mcp->mb[0] = MBC_TRACE_CONTROL; 2455 mcp->mb[1] = TC_EFT_DISABLE; 2456 mcp->out_mb = MBX_1|MBX_0; 2457 mcp->in_mb = MBX_1|MBX_0; 2458 mcp->tov = MBX_TOV_SECONDS; 2459 mcp->flags = 0; 2460 rval = qla2x00_mailbox_command(ha, mcp); 2461 if (rval != QLA_SUCCESS) { 2462 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", 2463 __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1])); 2464 } else { 2465 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2466 } 2467 2468 return rval; 2469 } 2470 2471 int 2472 qla2x00_enable_fce_trace(scsi_qla_host_t *ha, dma_addr_t fce_dma, 2473 uint16_t buffers, uint16_t *mb, uint32_t *dwords) 2474 { 2475 int rval; 2476 mbx_cmd_t mc; 2477 mbx_cmd_t *mcp = &mc; 2478 2479 if (!IS_QLA25XX(ha)) 2480 return QLA_FUNCTION_FAILED; 2481 2482 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2483 2484 mcp->mb[0] = MBC_TRACE_CONTROL; 2485 mcp->mb[1] = TC_FCE_ENABLE; 2486 mcp->mb[2] = LSW(fce_dma); 2487 mcp->mb[3] = MSW(fce_dma); 2488 mcp->mb[4] = LSW(MSD(fce_dma)); 2489 mcp->mb[5] = MSW(MSD(fce_dma)); 2490 mcp->mb[6] = buffers; 2491 mcp->mb[7] = TC_AEN_DISABLE; 2492 mcp->mb[8] = 0; 2493 mcp->mb[9] = TC_FCE_DEFAULT_RX_SIZE; 2494 mcp->mb[10] = TC_FCE_DEFAULT_TX_SIZE; 2495 mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2| 2496 MBX_1|MBX_0; 2497 mcp->in_mb = MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; 2498 mcp->tov = MBX_TOV_SECONDS; 2499 mcp->flags = 0; 2500 rval = qla2x00_mailbox_command(ha, mcp); 2501 if (rval != QLA_SUCCESS) { 2502 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", 2503 __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1])); 2504 } else { 2505 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2506 2507 if (mb) 2508 memcpy(mb, mcp->mb, 8 * sizeof(*mb)); 2509 if (dwords) 2510 *dwords = buffers; 2511 } 2512 2513 return rval; 2514 } 2515 2516 int 2517 qla2x00_disable_fce_trace(scsi_qla_host_t *ha, uint64_t *wr, uint64_t *rd) 2518 { 2519 int rval; 2520 mbx_cmd_t mc; 2521 mbx_cmd_t *mcp = &mc; 2522 2523 if (!IS_FWI2_CAPABLE(ha)) 2524 return QLA_FUNCTION_FAILED; 2525 2526 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2527 2528 mcp->mb[0] = MBC_TRACE_CONTROL; 2529 mcp->mb[1] = TC_FCE_DISABLE; 2530 mcp->mb[2] = TC_FCE_DISABLE_TRACE; 2531 mcp->out_mb = MBX_2|MBX_1|MBX_0; 2532 mcp->in_mb = MBX_9|MBX_8|MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2| 2533 MBX_1|MBX_0; 2534 mcp->tov = MBX_TOV_SECONDS; 2535 mcp->flags = 0; 2536 rval = qla2x00_mailbox_command(ha, mcp); 2537 if (rval != QLA_SUCCESS) { 2538 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", 2539 __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1])); 2540 } else { 2541 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2542 2543 if (wr) 2544 *wr = (uint64_t) mcp->mb[5] << 48 | 2545 (uint64_t) mcp->mb[4] << 32 | 2546 (uint64_t) mcp->mb[3] << 16 | 2547 (uint64_t) mcp->mb[2]; 2548 if (rd) 2549 *rd = (uint64_t) mcp->mb[9] << 48 | 2550 (uint64_t) mcp->mb[8] << 32 | 2551 (uint64_t) mcp->mb[7] << 16 | 2552 (uint64_t) mcp->mb[6]; 2553 } 2554 2555 return rval; 2556 } 2557 2558 int 2559 qla2x00_read_sfp(scsi_qla_host_t *ha, dma_addr_t sfp_dma, uint16_t addr, 2560 uint16_t off, uint16_t count) 2561 { 2562 int rval; 2563 mbx_cmd_t mc; 2564 mbx_cmd_t *mcp = &mc; 2565 2566 if (!IS_FWI2_CAPABLE(ha)) 2567 return QLA_FUNCTION_FAILED; 2568 2569 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2570 2571 mcp->mb[0] = MBC_READ_SFP; 2572 mcp->mb[1] = addr; 2573 mcp->mb[2] = MSW(sfp_dma); 2574 mcp->mb[3] = LSW(sfp_dma); 2575 mcp->mb[6] = MSW(MSD(sfp_dma)); 2576 mcp->mb[7] = LSW(MSD(sfp_dma)); 2577 mcp->mb[8] = count; 2578 mcp->mb[9] = off; 2579 mcp->mb[10] = 0; 2580 mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; 2581 mcp->in_mb = MBX_0; 2582 mcp->tov = MBX_TOV_SECONDS; 2583 mcp->flags = 0; 2584 rval = qla2x00_mailbox_command(ha, mcp); 2585 2586 if (rval != QLA_SUCCESS) { 2587 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, 2588 ha->host_no, rval, mcp->mb[0])); 2589 } else { 2590 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2591 } 2592 2593 return rval; 2594 } 2595 2596 int 2597 qla2x00_set_idma_speed(scsi_qla_host_t *ha, uint16_t loop_id, 2598 uint16_t port_speed, uint16_t *mb) 2599 { 2600 int rval; 2601 mbx_cmd_t mc; 2602 mbx_cmd_t *mcp = &mc; 2603 2604 if (!IS_IIDMA_CAPABLE(ha)) 2605 return QLA_FUNCTION_FAILED; 2606 2607 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2608 2609 mcp->mb[0] = MBC_PORT_PARAMS; 2610 mcp->mb[1] = loop_id; 2611 mcp->mb[2] = BIT_0; 2612 mcp->mb[3] = port_speed & (BIT_2|BIT_1|BIT_0); 2613 mcp->mb[4] = mcp->mb[5] = 0; 2614 mcp->out_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; 2615 mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_1|MBX_0; 2616 mcp->tov = MBX_TOV_SECONDS; 2617 mcp->flags = 0; 2618 rval = qla2x00_mailbox_command(ha, mcp); 2619 2620 /* Return mailbox statuses. */ 2621 if (mb != NULL) { 2622 mb[0] = mcp->mb[0]; 2623 mb[1] = mcp->mb[1]; 2624 mb[3] = mcp->mb[3]; 2625 mb[4] = mcp->mb[4]; 2626 mb[5] = mcp->mb[5]; 2627 } 2628 2629 if (rval != QLA_SUCCESS) { 2630 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, 2631 ha->host_no, rval)); 2632 } else { 2633 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2634 } 2635 2636 return rval; 2637 } 2638 2639 void 2640 qla24xx_report_id_acquisition(scsi_qla_host_t *ha, 2641 struct vp_rpt_id_entry_24xx *rptid_entry) 2642 { 2643 uint8_t vp_idx; 2644 uint16_t stat = le16_to_cpu(rptid_entry->vp_idx); 2645 scsi_qla_host_t *vha; 2646 2647 if (rptid_entry->entry_status != 0) 2648 return; 2649 2650 if (rptid_entry->format == 0) { 2651 DEBUG15(printk("%s:format 0 : scsi(%ld) number of VPs setup %d," 2652 " number of VPs acquired %d\n", __func__, ha->host_no, 2653 MSB(rptid_entry->vp_count), LSB(rptid_entry->vp_count))); 2654 DEBUG15(printk("%s primary port id %02x%02x%02x\n", __func__, 2655 rptid_entry->port_id[2], rptid_entry->port_id[1], 2656 rptid_entry->port_id[0])); 2657 } else if (rptid_entry->format == 1) { 2658 vp_idx = LSB(stat); 2659 DEBUG15(printk("%s:format 1: scsi(%ld): VP[%d] enabled " 2660 "- status %d - " 2661 "with port id %02x%02x%02x\n",__func__,ha->host_no, 2662 vp_idx, MSB(stat), 2663 rptid_entry->port_id[2], rptid_entry->port_id[1], 2664 rptid_entry->port_id[0])); 2665 if (vp_idx == 0) 2666 return; 2667 2668 if (MSB(stat) == 1) 2669 return; 2670 2671 list_for_each_entry(vha, &ha->vp_list, vp_list) 2672 if (vp_idx == vha->vp_idx) 2673 break; 2674 2675 if (!vha) 2676 return; 2677 2678 vha->d_id.b.domain = rptid_entry->port_id[2]; 2679 vha->d_id.b.area = rptid_entry->port_id[1]; 2680 vha->d_id.b.al_pa = rptid_entry->port_id[0]; 2681 2682 /* 2683 * Cannot configure here as we are still sitting on the 2684 * response queue. Handle it in dpc context. 2685 */ 2686 set_bit(VP_IDX_ACQUIRED, &vha->vp_flags); 2687 set_bit(VP_DPC_NEEDED, &ha->dpc_flags); 2688 2689 qla2xxx_wake_dpc(ha); 2690 } 2691 } 2692 2693 /* 2694 * qla24xx_modify_vp_config 2695 * Change VP configuration for vha 2696 * 2697 * Input: 2698 * vha = adapter block pointer. 2699 * 2700 * Returns: 2701 * qla2xxx local function return status code. 2702 * 2703 * Context: 2704 * Kernel context. 2705 */ 2706 int 2707 qla24xx_modify_vp_config(scsi_qla_host_t *vha) 2708 { 2709 int rval; 2710 struct vp_config_entry_24xx *vpmod; 2711 dma_addr_t vpmod_dma; 2712 scsi_qla_host_t *pha; 2713 2714 /* This can be called by the parent */ 2715 pha = to_qla_parent(vha); 2716 2717 vpmod = dma_pool_alloc(pha->s_dma_pool, GFP_KERNEL, &vpmod_dma); 2718 if (!vpmod) { 2719 DEBUG2_3(printk("%s(%ld): failed to allocate Modify VP " 2720 "IOCB.\n", __func__, pha->host_no)); 2721 return QLA_MEMORY_ALLOC_FAILED; 2722 } 2723 2724 memset(vpmod, 0, sizeof(struct vp_config_entry_24xx)); 2725 vpmod->entry_type = VP_CONFIG_IOCB_TYPE; 2726 vpmod->entry_count = 1; 2727 vpmod->command = VCT_COMMAND_MOD_ENABLE_VPS; 2728 vpmod->vp_count = 1; 2729 vpmod->vp_index1 = vha->vp_idx; 2730 vpmod->options_idx1 = BIT_3|BIT_4|BIT_5; 2731 memcpy(vpmod->node_name_idx1, vha->node_name, WWN_SIZE); 2732 memcpy(vpmod->port_name_idx1, vha->port_name, WWN_SIZE); 2733 vpmod->entry_count = 1; 2734 2735 rval = qla2x00_issue_iocb(pha, vpmod, vpmod_dma, 0); 2736 if (rval != QLA_SUCCESS) { 2737 DEBUG2_3_11(printk("%s(%ld): failed to issue VP config IOCB" 2738 "(%x).\n", __func__, pha->host_no, rval)); 2739 } else if (vpmod->comp_status != 0) { 2740 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 2741 "-- error status (%x).\n", __func__, pha->host_no, 2742 vpmod->comp_status)); 2743 rval = QLA_FUNCTION_FAILED; 2744 } else if (vpmod->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) { 2745 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 2746 "-- completion status (%x).\n", __func__, pha->host_no, 2747 le16_to_cpu(vpmod->comp_status))); 2748 rval = QLA_FUNCTION_FAILED; 2749 } else { 2750 /* EMPTY */ 2751 DEBUG11(printk("%s(%ld): done.\n", __func__, pha->host_no)); 2752 fc_vport_set_state(vha->fc_vport, FC_VPORT_INITIALIZING); 2753 } 2754 dma_pool_free(pha->s_dma_pool, vpmod, vpmod_dma); 2755 2756 return rval; 2757 } 2758 2759 /* 2760 * qla24xx_control_vp 2761 * Enable a virtual port for given host 2762 * 2763 * Input: 2764 * ha = adapter block pointer. 2765 * vhba = virtual adapter (unused) 2766 * index = index number for enabled VP 2767 * 2768 * Returns: 2769 * qla2xxx local function return status code. 2770 * 2771 * Context: 2772 * Kernel context. 2773 */ 2774 int 2775 qla24xx_control_vp(scsi_qla_host_t *vha, int cmd) 2776 { 2777 int rval; 2778 int map, pos; 2779 struct vp_ctrl_entry_24xx *vce; 2780 dma_addr_t vce_dma; 2781 scsi_qla_host_t *ha = vha->parent; 2782 int vp_index = vha->vp_idx; 2783 2784 DEBUG11(printk("%s(%ld): entered. Enabling index %d\n", __func__, 2785 ha->host_no, vp_index)); 2786 2787 if (vp_index == 0 || vp_index >= ha->max_npiv_vports) 2788 return QLA_PARAMETER_ERROR; 2789 2790 vce = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &vce_dma); 2791 if (!vce) { 2792 DEBUG2_3(printk("%s(%ld): " 2793 "failed to allocate VP Control IOCB.\n", __func__, 2794 ha->host_no)); 2795 return QLA_MEMORY_ALLOC_FAILED; 2796 } 2797 memset(vce, 0, sizeof(struct vp_ctrl_entry_24xx)); 2798 2799 vce->entry_type = VP_CTRL_IOCB_TYPE; 2800 vce->entry_count = 1; 2801 vce->command = cpu_to_le16(cmd); 2802 vce->vp_count = __constant_cpu_to_le16(1); 2803 2804 /* index map in firmware starts with 1; decrement index 2805 * this is ok as we never use index 0 2806 */ 2807 map = (vp_index - 1) / 8; 2808 pos = (vp_index - 1) & 7; 2809 mutex_lock(&ha->vport_lock); 2810 vce->vp_idx_map[map] |= 1 << pos; 2811 mutex_unlock(&ha->vport_lock); 2812 2813 rval = qla2x00_issue_iocb(ha, vce, vce_dma, 0); 2814 if (rval != QLA_SUCCESS) { 2815 DEBUG2_3_11(printk("%s(%ld): failed to issue VP control IOCB" 2816 "(%x).\n", __func__, ha->host_no, rval)); 2817 printk("%s(%ld): failed to issue VP control IOCB" 2818 "(%x).\n", __func__, ha->host_no, rval); 2819 } else if (vce->entry_status != 0) { 2820 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 2821 "-- error status (%x).\n", __func__, ha->host_no, 2822 vce->entry_status)); 2823 printk("%s(%ld): failed to complete IOCB " 2824 "-- error status (%x).\n", __func__, ha->host_no, 2825 vce->entry_status); 2826 rval = QLA_FUNCTION_FAILED; 2827 } else if (vce->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) { 2828 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB " 2829 "-- completion status (%x).\n", __func__, ha->host_no, 2830 le16_to_cpu(vce->comp_status))); 2831 printk("%s(%ld): failed to complete IOCB " 2832 "-- completion status (%x).\n", __func__, ha->host_no, 2833 le16_to_cpu(vce->comp_status)); 2834 rval = QLA_FUNCTION_FAILED; 2835 } else { 2836 DEBUG2(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2837 } 2838 2839 dma_pool_free(ha->s_dma_pool, vce, vce_dma); 2840 2841 return rval; 2842 } 2843 2844 /* 2845 * qla2x00_send_change_request 2846 * Receive or disable RSCN request from fabric controller 2847 * 2848 * Input: 2849 * ha = adapter block pointer 2850 * format = registration format: 2851 * 0 - Reserved 2852 * 1 - Fabric detected registration 2853 * 2 - N_port detected registration 2854 * 3 - Full registration 2855 * FF - clear registration 2856 * vp_idx = Virtual port index 2857 * 2858 * Returns: 2859 * qla2x00 local function return status code. 2860 * 2861 * Context: 2862 * Kernel Context 2863 */ 2864 2865 int 2866 qla2x00_send_change_request(scsi_qla_host_t *ha, uint16_t format, 2867 uint16_t vp_idx) 2868 { 2869 int rval; 2870 mbx_cmd_t mc; 2871 mbx_cmd_t *mcp = &mc; 2872 2873 /* 2874 * This command is implicitly executed by firmware during login for the 2875 * physical hosts 2876 */ 2877 if (vp_idx == 0) 2878 return QLA_FUNCTION_FAILED; 2879 2880 mcp->mb[0] = MBC_SEND_CHANGE_REQUEST; 2881 mcp->mb[1] = format; 2882 mcp->mb[9] = vp_idx; 2883 mcp->out_mb = MBX_9|MBX_1|MBX_0; 2884 mcp->in_mb = MBX_0|MBX_1; 2885 mcp->tov = MBX_TOV_SECONDS; 2886 mcp->flags = 0; 2887 rval = qla2x00_mailbox_command(ha, mcp); 2888 2889 if (rval == QLA_SUCCESS) { 2890 if (mcp->mb[0] != MBS_COMMAND_COMPLETE) { 2891 rval = BIT_1; 2892 } 2893 } else 2894 rval = BIT_1; 2895 2896 return rval; 2897 } 2898 2899 int 2900 qla2x00_dump_ram(scsi_qla_host_t *ha, dma_addr_t req_dma, uint32_t addr, 2901 uint32_t size) 2902 { 2903 int rval; 2904 mbx_cmd_t mc; 2905 mbx_cmd_t *mcp = &mc; 2906 2907 DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2908 2909 if (MSW(addr) || IS_FWI2_CAPABLE(ha)) { 2910 mcp->mb[0] = MBC_DUMP_RISC_RAM_EXTENDED; 2911 mcp->mb[8] = MSW(addr); 2912 mcp->out_mb = MBX_8|MBX_0; 2913 } else { 2914 mcp->mb[0] = MBC_DUMP_RISC_RAM; 2915 mcp->out_mb = MBX_0; 2916 } 2917 mcp->mb[1] = LSW(addr); 2918 mcp->mb[2] = MSW(req_dma); 2919 mcp->mb[3] = LSW(req_dma); 2920 mcp->mb[6] = MSW(MSD(req_dma)); 2921 mcp->mb[7] = LSW(MSD(req_dma)); 2922 mcp->out_mb |= MBX_7|MBX_6|MBX_3|MBX_2|MBX_1; 2923 if (IS_FWI2_CAPABLE(ha)) { 2924 mcp->mb[4] = MSW(size); 2925 mcp->mb[5] = LSW(size); 2926 mcp->out_mb |= MBX_5|MBX_4; 2927 } else { 2928 mcp->mb[4] = LSW(size); 2929 mcp->out_mb |= MBX_4; 2930 } 2931 2932 mcp->in_mb = MBX_0; 2933 mcp->tov = MBX_TOV_SECONDS; 2934 mcp->flags = 0; 2935 rval = qla2x00_mailbox_command(ha, mcp); 2936 2937 if (rval != QLA_SUCCESS) { 2938 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__, 2939 ha->host_no, rval, mcp->mb[0])); 2940 } else { 2941 DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); 2942 } 2943 2944 return rval; 2945 } 2946 2947 /* 84XX Support **************************************************************/ 2948 2949 struct cs84xx_mgmt_cmd { 2950 union { 2951 struct verify_chip_entry_84xx req; 2952 struct verify_chip_rsp_84xx rsp; 2953 } p; 2954 }; 2955 2956 int 2957 qla84xx_verify_chip(struct scsi_qla_host *ha, uint16_t *status) 2958 { 2959 int rval, retry; 2960 struct cs84xx_mgmt_cmd *mn; 2961 dma_addr_t mn_dma; 2962 uint16_t options; 2963 unsigned long flags; 2964 2965 DEBUG16(printk("%s(%ld): entered.\n", __func__, ha->host_no)); 2966 2967 mn = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &mn_dma); 2968 if (mn == NULL) { 2969 DEBUG2_3(printk("%s(%ld): failed to allocate Verify ISP84XX " 2970 "IOCB.\n", __func__, ha->host_no)); 2971 return QLA_MEMORY_ALLOC_FAILED; 2972 } 2973 2974 /* Force Update? */ 2975 options = ha->cs84xx->fw_update ? VCO_FORCE_UPDATE : 0; 2976 /* Diagnostic firmware? */ 2977 /* options |= MENLO_DIAG_FW; */ 2978 /* We update the firmware with only one data sequence. */ 2979 options |= VCO_END_OF_DATA; 2980 2981 do { 2982 retry = 0; 2983 memset(mn, 0, sizeof(*mn)); 2984 mn->p.req.entry_type = VERIFY_CHIP_IOCB_TYPE; 2985 mn->p.req.entry_count = 1; 2986 mn->p.req.options = cpu_to_le16(options); 2987 2988 DEBUG16(printk("%s(%ld): Dump of Verify Request.\n", __func__, 2989 ha->host_no)); 2990 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn, 2991 sizeof(*mn))); 2992 2993 rval = qla2x00_issue_iocb_timeout(ha, mn, mn_dma, 0, 120); 2994 if (rval != QLA_SUCCESS) { 2995 DEBUG2_16(printk("%s(%ld): failed to issue Verify " 2996 "IOCB (%x).\n", __func__, ha->host_no, rval)); 2997 goto verify_done; 2998 } 2999 3000 DEBUG16(printk("%s(%ld): Dump of Verify Response.\n", __func__, 3001 ha->host_no)); 3002 DEBUG16(qla2x00_dump_buffer((uint8_t *)mn, 3003 sizeof(*mn))); 3004 3005 status[0] = le16_to_cpu(mn->p.rsp.comp_status); 3006 status[1] = status[0] == CS_VCS_CHIP_FAILURE ? 3007 le16_to_cpu(mn->p.rsp.failure_code) : 0; 3008 DEBUG2_16(printk("%s(%ld): cs=%x fc=%x\n", __func__, 3009 ha->host_no, status[0], status[1])); 3010 3011 if (status[0] != CS_COMPLETE) { 3012 rval = QLA_FUNCTION_FAILED; 3013 if (!(options & VCO_DONT_UPDATE_FW)) { 3014 DEBUG2_16(printk("%s(%ld): Firmware update " 3015 "failed. Retrying without update " 3016 "firmware.\n", __func__, ha->host_no)); 3017 options |= VCO_DONT_UPDATE_FW; 3018 options &= ~VCO_FORCE_UPDATE; 3019 retry = 1; 3020 } 3021 } else { 3022 DEBUG2_16(printk("%s(%ld): firmware updated to %x.\n", 3023 __func__, ha->host_no, 3024 le32_to_cpu(mn->p.rsp.fw_ver))); 3025 3026 /* NOTE: we only update OP firmware. */ 3027 spin_lock_irqsave(&ha->cs84xx->access_lock, flags); 3028 ha->cs84xx->op_fw_version = 3029 le32_to_cpu(mn->p.rsp.fw_ver); 3030 spin_unlock_irqrestore(&ha->cs84xx->access_lock, 3031 flags); 3032 } 3033 } while (retry); 3034 3035 verify_done: 3036 dma_pool_free(ha->s_dma_pool, mn, mn_dma); 3037 3038 if (rval != QLA_SUCCESS) { 3039 DEBUG2_16(printk("%s(%ld): failed=%x.\n", __func__, 3040 ha->host_no, rval)); 3041 } else { 3042 DEBUG16(printk("%s(%ld): done.\n", __func__, ha->host_no)); 3043 } 3044 3045 return rval; 3046 } 3047