xref: /openbmc/linux/drivers/scsi/qla2xxx/qla_isr.c (revision d0bd7f2a)
1 /*
2  * QLogic Fibre Channel HBA Driver
3  * Copyright (c)  2003-2014 QLogic Corporation
4  *
5  * See LICENSE.qla2xxx for copyright and licensing details.
6  */
7 #include "qla_def.h"
8 #include "qla_target.h"
9 
10 #include <linux/delay.h>
11 #include <linux/slab.h>
12 #include <scsi/scsi_tcq.h>
13 #include <scsi/scsi_bsg_fc.h>
14 #include <scsi/scsi_eh.h>
15 
16 static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t);
17 static void qla2x00_status_entry(scsi_qla_host_t *, struct rsp_que *, void *);
18 static void qla2x00_status_cont_entry(struct rsp_que *, sts_cont_entry_t *);
19 static void qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *,
20 	sts_entry_t *);
21 
22 /**
23  * qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
24  * @irq:
25  * @dev_id: SCSI driver HA context
26  *
27  * Called by system whenever the host adapter generates an interrupt.
28  *
29  * Returns handled flag.
30  */
31 irqreturn_t
32 qla2100_intr_handler(int irq, void *dev_id)
33 {
34 	scsi_qla_host_t	*vha;
35 	struct qla_hw_data *ha;
36 	struct device_reg_2xxx __iomem *reg;
37 	int		status;
38 	unsigned long	iter;
39 	uint16_t	hccr;
40 	uint16_t	mb[4];
41 	struct rsp_que *rsp;
42 	unsigned long	flags;
43 
44 	rsp = (struct rsp_que *) dev_id;
45 	if (!rsp) {
46 		ql_log(ql_log_info, NULL, 0x505d,
47 		    "%s: NULL response queue pointer.\n", __func__);
48 		return (IRQ_NONE);
49 	}
50 
51 	ha = rsp->hw;
52 	reg = &ha->iobase->isp;
53 	status = 0;
54 
55 	spin_lock_irqsave(&ha->hardware_lock, flags);
56 	vha = pci_get_drvdata(ha->pdev);
57 	for (iter = 50; iter--; ) {
58 		hccr = RD_REG_WORD(&reg->hccr);
59 		if (qla2x00_check_reg16_for_disconnect(vha, hccr))
60 			break;
61 		if (hccr & HCCR_RISC_PAUSE) {
62 			if (pci_channel_offline(ha->pdev))
63 				break;
64 
65 			/*
66 			 * Issue a "HARD" reset in order for the RISC interrupt
67 			 * bit to be cleared.  Schedule a big hammer to get
68 			 * out of the RISC PAUSED state.
69 			 */
70 			WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
71 			RD_REG_WORD(&reg->hccr);
72 
73 			ha->isp_ops->fw_dump(vha, 1);
74 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
75 			break;
76 		} else if ((RD_REG_WORD(&reg->istatus) & ISR_RISC_INT) == 0)
77 			break;
78 
79 		if (RD_REG_WORD(&reg->semaphore) & BIT_0) {
80 			WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
81 			RD_REG_WORD(&reg->hccr);
82 
83 			/* Get mailbox data. */
84 			mb[0] = RD_MAILBOX_REG(ha, reg, 0);
85 			if (mb[0] > 0x3fff && mb[0] < 0x8000) {
86 				qla2x00_mbx_completion(vha, mb[0]);
87 				status |= MBX_INTERRUPT;
88 			} else if (mb[0] > 0x7fff && mb[0] < 0xc000) {
89 				mb[1] = RD_MAILBOX_REG(ha, reg, 1);
90 				mb[2] = RD_MAILBOX_REG(ha, reg, 2);
91 				mb[3] = RD_MAILBOX_REG(ha, reg, 3);
92 				qla2x00_async_event(vha, rsp, mb);
93 			} else {
94 				/*EMPTY*/
95 				ql_dbg(ql_dbg_async, vha, 0x5025,
96 				    "Unrecognized interrupt type (%d).\n",
97 				    mb[0]);
98 			}
99 			/* Release mailbox registers. */
100 			WRT_REG_WORD(&reg->semaphore, 0);
101 			RD_REG_WORD(&reg->semaphore);
102 		} else {
103 			qla2x00_process_response_queue(rsp);
104 
105 			WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
106 			RD_REG_WORD(&reg->hccr);
107 		}
108 	}
109 	qla2x00_handle_mbx_completion(ha, status);
110 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
111 
112 	return (IRQ_HANDLED);
113 }
114 
115 bool
116 qla2x00_check_reg32_for_disconnect(scsi_qla_host_t *vha, uint32_t reg)
117 {
118 	/* Check for PCI disconnection */
119 	if (reg == 0xffffffff) {
120 		if (!test_and_set_bit(PFLG_DISCONNECTED, &vha->pci_flags) &&
121 		    !test_bit(PFLG_DRIVER_REMOVING, &vha->pci_flags) &&
122 		    !test_bit(PFLG_DRIVER_PROBING, &vha->pci_flags)) {
123 			/*
124 			 * Schedule this (only once) on the default system
125 			 * workqueue so that all the adapter workqueues and the
126 			 * DPC thread can be shutdown cleanly.
127 			 */
128 			schedule_work(&vha->hw->board_disable);
129 		}
130 		return true;
131 	} else
132 		return false;
133 }
134 
135 bool
136 qla2x00_check_reg16_for_disconnect(scsi_qla_host_t *vha, uint16_t reg)
137 {
138 	return qla2x00_check_reg32_for_disconnect(vha, 0xffff0000 | reg);
139 }
140 
141 /**
142  * qla2300_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
143  * @irq:
144  * @dev_id: SCSI driver HA context
145  *
146  * Called by system whenever the host adapter generates an interrupt.
147  *
148  * Returns handled flag.
149  */
150 irqreturn_t
151 qla2300_intr_handler(int irq, void *dev_id)
152 {
153 	scsi_qla_host_t	*vha;
154 	struct device_reg_2xxx __iomem *reg;
155 	int		status;
156 	unsigned long	iter;
157 	uint32_t	stat;
158 	uint16_t	hccr;
159 	uint16_t	mb[4];
160 	struct rsp_que *rsp;
161 	struct qla_hw_data *ha;
162 	unsigned long	flags;
163 
164 	rsp = (struct rsp_que *) dev_id;
165 	if (!rsp) {
166 		ql_log(ql_log_info, NULL, 0x5058,
167 		    "%s: NULL response queue pointer.\n", __func__);
168 		return (IRQ_NONE);
169 	}
170 
171 	ha = rsp->hw;
172 	reg = &ha->iobase->isp;
173 	status = 0;
174 
175 	spin_lock_irqsave(&ha->hardware_lock, flags);
176 	vha = pci_get_drvdata(ha->pdev);
177 	for (iter = 50; iter--; ) {
178 		stat = RD_REG_DWORD(&reg->u.isp2300.host_status);
179 		if (qla2x00_check_reg32_for_disconnect(vha, stat))
180 			break;
181 		if (stat & HSR_RISC_PAUSED) {
182 			if (unlikely(pci_channel_offline(ha->pdev)))
183 				break;
184 
185 			hccr = RD_REG_WORD(&reg->hccr);
186 
187 			if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8))
188 				ql_log(ql_log_warn, vha, 0x5026,
189 				    "Parity error -- HCCR=%x, Dumping "
190 				    "firmware.\n", hccr);
191 			else
192 				ql_log(ql_log_warn, vha, 0x5027,
193 				    "RISC paused -- HCCR=%x, Dumping "
194 				    "firmware.\n", hccr);
195 
196 			/*
197 			 * Issue a "HARD" reset in order for the RISC
198 			 * interrupt bit to be cleared.  Schedule a big
199 			 * hammer to get out of the RISC PAUSED state.
200 			 */
201 			WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
202 			RD_REG_WORD(&reg->hccr);
203 
204 			ha->isp_ops->fw_dump(vha, 1);
205 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
206 			break;
207 		} else if ((stat & HSR_RISC_INT) == 0)
208 			break;
209 
210 		switch (stat & 0xff) {
211 		case 0x1:
212 		case 0x2:
213 		case 0x10:
214 		case 0x11:
215 			qla2x00_mbx_completion(vha, MSW(stat));
216 			status |= MBX_INTERRUPT;
217 
218 			/* Release mailbox registers. */
219 			WRT_REG_WORD(&reg->semaphore, 0);
220 			break;
221 		case 0x12:
222 			mb[0] = MSW(stat);
223 			mb[1] = RD_MAILBOX_REG(ha, reg, 1);
224 			mb[2] = RD_MAILBOX_REG(ha, reg, 2);
225 			mb[3] = RD_MAILBOX_REG(ha, reg, 3);
226 			qla2x00_async_event(vha, rsp, mb);
227 			break;
228 		case 0x13:
229 			qla2x00_process_response_queue(rsp);
230 			break;
231 		case 0x15:
232 			mb[0] = MBA_CMPLT_1_16BIT;
233 			mb[1] = MSW(stat);
234 			qla2x00_async_event(vha, rsp, mb);
235 			break;
236 		case 0x16:
237 			mb[0] = MBA_SCSI_COMPLETION;
238 			mb[1] = MSW(stat);
239 			mb[2] = RD_MAILBOX_REG(ha, reg, 2);
240 			qla2x00_async_event(vha, rsp, mb);
241 			break;
242 		default:
243 			ql_dbg(ql_dbg_async, vha, 0x5028,
244 			    "Unrecognized interrupt type (%d).\n", stat & 0xff);
245 			break;
246 		}
247 		WRT_REG_WORD(&reg->hccr, HCCR_CLR_RISC_INT);
248 		RD_REG_WORD_RELAXED(&reg->hccr);
249 	}
250 	qla2x00_handle_mbx_completion(ha, status);
251 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
252 
253 	return (IRQ_HANDLED);
254 }
255 
256 /**
257  * qla2x00_mbx_completion() - Process mailbox command completions.
258  * @ha: SCSI driver HA context
259  * @mb0: Mailbox0 register
260  */
261 static void
262 qla2x00_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
263 {
264 	uint16_t	cnt;
265 	uint32_t	mboxes;
266 	uint16_t __iomem *wptr;
267 	struct qla_hw_data *ha = vha->hw;
268 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
269 
270 	/* Read all mbox registers? */
271 	mboxes = (1 << ha->mbx_count) - 1;
272 	if (!ha->mcp)
273 		ql_dbg(ql_dbg_async, vha, 0x5001, "MBX pointer ERROR.\n");
274 	else
275 		mboxes = ha->mcp->in_mb;
276 
277 	/* Load return mailbox registers. */
278 	ha->flags.mbox_int = 1;
279 	ha->mailbox_out[0] = mb0;
280 	mboxes >>= 1;
281 	wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 1);
282 
283 	for (cnt = 1; cnt < ha->mbx_count; cnt++) {
284 		if (IS_QLA2200(ha) && cnt == 8)
285 			wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 8);
286 		if ((cnt == 4 || cnt == 5) && (mboxes & BIT_0))
287 			ha->mailbox_out[cnt] = qla2x00_debounce_register(wptr);
288 		else if (mboxes & BIT_0)
289 			ha->mailbox_out[cnt] = RD_REG_WORD(wptr);
290 
291 		wptr++;
292 		mboxes >>= 1;
293 	}
294 }
295 
296 static void
297 qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr)
298 {
299 	static char *event[] =
300 		{ "Complete", "Request Notification", "Time Extension" };
301 	int rval;
302 	struct device_reg_24xx __iomem *reg24 = &vha->hw->iobase->isp24;
303 	struct device_reg_82xx __iomem *reg82 = &vha->hw->iobase->isp82;
304 	uint16_t __iomem *wptr;
305 	uint16_t cnt, timeout, mb[QLA_IDC_ACK_REGS];
306 
307 	/* Seed data -- mailbox1 -> mailbox7. */
308 	if (IS_QLA81XX(vha->hw) || IS_QLA83XX(vha->hw))
309 		wptr = (uint16_t __iomem *)&reg24->mailbox1;
310 	else if (IS_QLA8044(vha->hw))
311 		wptr = (uint16_t __iomem *)&reg82->mailbox_out[1];
312 	else
313 		return;
314 
315 	for (cnt = 0; cnt < QLA_IDC_ACK_REGS; cnt++, wptr++)
316 		mb[cnt] = RD_REG_WORD(wptr);
317 
318 	ql_dbg(ql_dbg_async, vha, 0x5021,
319 	    "Inter-Driver Communication %s -- "
320 	    "%04x %04x %04x %04x %04x %04x %04x.\n",
321 	    event[aen & 0xff], mb[0], mb[1], mb[2], mb[3],
322 	    mb[4], mb[5], mb[6]);
323 	switch (aen) {
324 	/* Handle IDC Error completion case. */
325 	case MBA_IDC_COMPLETE:
326 		if (mb[1] >> 15) {
327 			vha->hw->flags.idc_compl_status = 1;
328 			if (vha->hw->notify_dcbx_comp && !vha->vp_idx)
329 				complete(&vha->hw->dcbx_comp);
330 		}
331 		break;
332 
333 	case MBA_IDC_NOTIFY:
334 		/* Acknowledgement needed? [Notify && non-zero timeout]. */
335 		timeout = (descr >> 8) & 0xf;
336 		ql_dbg(ql_dbg_async, vha, 0x5022,
337 		    "%lu Inter-Driver Communication %s -- ACK timeout=%d.\n",
338 		    vha->host_no, event[aen & 0xff], timeout);
339 
340 		if (!timeout)
341 			return;
342 		rval = qla2x00_post_idc_ack_work(vha, mb);
343 		if (rval != QLA_SUCCESS)
344 			ql_log(ql_log_warn, vha, 0x5023,
345 			    "IDC failed to post ACK.\n");
346 		break;
347 	case MBA_IDC_TIME_EXT:
348 		vha->hw->idc_extend_tmo = descr;
349 		ql_dbg(ql_dbg_async, vha, 0x5087,
350 		    "%lu Inter-Driver Communication %s -- "
351 		    "Extend timeout by=%d.\n",
352 		    vha->host_no, event[aen & 0xff], vha->hw->idc_extend_tmo);
353 		break;
354 	}
355 }
356 
357 #define LS_UNKNOWN	2
358 const char *
359 qla2x00_get_link_speed_str(struct qla_hw_data *ha, uint16_t speed)
360 {
361 	static const char *const link_speeds[] = {
362 		"1", "2", "?", "4", "8", "16", "32", "10"
363 	};
364 #define	QLA_LAST_SPEED	7
365 
366 	if (IS_QLA2100(ha) || IS_QLA2200(ha))
367 		return link_speeds[0];
368 	else if (speed == 0x13)
369 		return link_speeds[QLA_LAST_SPEED];
370 	else if (speed < QLA_LAST_SPEED)
371 		return link_speeds[speed];
372 	else
373 		return link_speeds[LS_UNKNOWN];
374 }
375 
376 static void
377 qla83xx_handle_8200_aen(scsi_qla_host_t *vha, uint16_t *mb)
378 {
379 	struct qla_hw_data *ha = vha->hw;
380 
381 	/*
382 	 * 8200 AEN Interpretation:
383 	 * mb[0] = AEN code
384 	 * mb[1] = AEN Reason code
385 	 * mb[2] = LSW of Peg-Halt Status-1 Register
386 	 * mb[6] = MSW of Peg-Halt Status-1 Register
387 	 * mb[3] = LSW of Peg-Halt Status-2 register
388 	 * mb[7] = MSW of Peg-Halt Status-2 register
389 	 * mb[4] = IDC Device-State Register value
390 	 * mb[5] = IDC Driver-Presence Register value
391 	 */
392 	ql_dbg(ql_dbg_async, vha, 0x506b, "AEN Code: mb[0] = 0x%x AEN reason: "
393 	    "mb[1] = 0x%x PH-status1: mb[2] = 0x%x PH-status1: mb[6] = 0x%x.\n",
394 	    mb[0], mb[1], mb[2], mb[6]);
395 	ql_dbg(ql_dbg_async, vha, 0x506c, "PH-status2: mb[3] = 0x%x "
396 	    "PH-status2: mb[7] = 0x%x Device-State: mb[4] = 0x%x "
397 	    "Drv-Presence: mb[5] = 0x%x.\n", mb[3], mb[7], mb[4], mb[5]);
398 
399 	if (mb[1] & (IDC_PEG_HALT_STATUS_CHANGE | IDC_NIC_FW_REPORTED_FAILURE |
400 				IDC_HEARTBEAT_FAILURE)) {
401 		ha->flags.nic_core_hung = 1;
402 		ql_log(ql_log_warn, vha, 0x5060,
403 		    "83XX: F/W Error Reported: Check if reset required.\n");
404 
405 		if (mb[1] & IDC_PEG_HALT_STATUS_CHANGE) {
406 			uint32_t protocol_engine_id, fw_err_code, err_level;
407 
408 			/*
409 			 * IDC_PEG_HALT_STATUS_CHANGE interpretation:
410 			 *  - PEG-Halt Status-1 Register:
411 			 *	(LSW = mb[2], MSW = mb[6])
412 			 *	Bits 0-7   = protocol-engine ID
413 			 *	Bits 8-28  = f/w error code
414 			 *	Bits 29-31 = Error-level
415 			 *	    Error-level 0x1 = Non-Fatal error
416 			 *	    Error-level 0x2 = Recoverable Fatal error
417 			 *	    Error-level 0x4 = UnRecoverable Fatal error
418 			 *  - PEG-Halt Status-2 Register:
419 			 *	(LSW = mb[3], MSW = mb[7])
420 			 */
421 			protocol_engine_id = (mb[2] & 0xff);
422 			fw_err_code = (((mb[2] & 0xff00) >> 8) |
423 			    ((mb[6] & 0x1fff) << 8));
424 			err_level = ((mb[6] & 0xe000) >> 13);
425 			ql_log(ql_log_warn, vha, 0x5061, "PegHalt Status-1 "
426 			    "Register: protocol_engine_id=0x%x "
427 			    "fw_err_code=0x%x err_level=0x%x.\n",
428 			    protocol_engine_id, fw_err_code, err_level);
429 			ql_log(ql_log_warn, vha, 0x5062, "PegHalt Status-2 "
430 			    "Register: 0x%x%x.\n", mb[7], mb[3]);
431 			if (err_level == ERR_LEVEL_NON_FATAL) {
432 				ql_log(ql_log_warn, vha, 0x5063,
433 				    "Not a fatal error, f/w has recovered "
434 				    "iteself.\n");
435 			} else if (err_level == ERR_LEVEL_RECOVERABLE_FATAL) {
436 				ql_log(ql_log_fatal, vha, 0x5064,
437 				    "Recoverable Fatal error: Chip reset "
438 				    "required.\n");
439 				qla83xx_schedule_work(vha,
440 				    QLA83XX_NIC_CORE_RESET);
441 			} else if (err_level == ERR_LEVEL_UNRECOVERABLE_FATAL) {
442 				ql_log(ql_log_fatal, vha, 0x5065,
443 				    "Unrecoverable Fatal error: Set FAILED "
444 				    "state, reboot required.\n");
445 				qla83xx_schedule_work(vha,
446 				    QLA83XX_NIC_CORE_UNRECOVERABLE);
447 			}
448 		}
449 
450 		if (mb[1] & IDC_NIC_FW_REPORTED_FAILURE) {
451 			uint16_t peg_fw_state, nw_interface_link_up;
452 			uint16_t nw_interface_signal_detect, sfp_status;
453 			uint16_t htbt_counter, htbt_monitor_enable;
454 			uint16_t sfp_additonal_info, sfp_multirate;
455 			uint16_t sfp_tx_fault, link_speed, dcbx_status;
456 
457 			/*
458 			 * IDC_NIC_FW_REPORTED_FAILURE interpretation:
459 			 *  - PEG-to-FC Status Register:
460 			 *	(LSW = mb[2], MSW = mb[6])
461 			 *	Bits 0-7   = Peg-Firmware state
462 			 *	Bit 8      = N/W Interface Link-up
463 			 *	Bit 9      = N/W Interface signal detected
464 			 *	Bits 10-11 = SFP Status
465 			 *	  SFP Status 0x0 = SFP+ transceiver not expected
466 			 *	  SFP Status 0x1 = SFP+ transceiver not present
467 			 *	  SFP Status 0x2 = SFP+ transceiver invalid
468 			 *	  SFP Status 0x3 = SFP+ transceiver present and
469 			 *	  valid
470 			 *	Bits 12-14 = Heartbeat Counter
471 			 *	Bit 15     = Heartbeat Monitor Enable
472 			 *	Bits 16-17 = SFP Additional Info
473 			 *	  SFP info 0x0 = Unregocnized transceiver for
474 			 *	  Ethernet
475 			 *	  SFP info 0x1 = SFP+ brand validation failed
476 			 *	  SFP info 0x2 = SFP+ speed validation failed
477 			 *	  SFP info 0x3 = SFP+ access error
478 			 *	Bit 18     = SFP Multirate
479 			 *	Bit 19     = SFP Tx Fault
480 			 *	Bits 20-22 = Link Speed
481 			 *	Bits 23-27 = Reserved
482 			 *	Bits 28-30 = DCBX Status
483 			 *	  DCBX Status 0x0 = DCBX Disabled
484 			 *	  DCBX Status 0x1 = DCBX Enabled
485 			 *	  DCBX Status 0x2 = DCBX Exchange error
486 			 *	Bit 31     = Reserved
487 			 */
488 			peg_fw_state = (mb[2] & 0x00ff);
489 			nw_interface_link_up = ((mb[2] & 0x0100) >> 8);
490 			nw_interface_signal_detect = ((mb[2] & 0x0200) >> 9);
491 			sfp_status = ((mb[2] & 0x0c00) >> 10);
492 			htbt_counter = ((mb[2] & 0x7000) >> 12);
493 			htbt_monitor_enable = ((mb[2] & 0x8000) >> 15);
494 			sfp_additonal_info = (mb[6] & 0x0003);
495 			sfp_multirate = ((mb[6] & 0x0004) >> 2);
496 			sfp_tx_fault = ((mb[6] & 0x0008) >> 3);
497 			link_speed = ((mb[6] & 0x0070) >> 4);
498 			dcbx_status = ((mb[6] & 0x7000) >> 12);
499 
500 			ql_log(ql_log_warn, vha, 0x5066,
501 			    "Peg-to-Fc Status Register:\n"
502 			    "peg_fw_state=0x%x, nw_interface_link_up=0x%x, "
503 			    "nw_interface_signal_detect=0x%x"
504 			    "\nsfp_statis=0x%x.\n ", peg_fw_state,
505 			    nw_interface_link_up, nw_interface_signal_detect,
506 			    sfp_status);
507 			ql_log(ql_log_warn, vha, 0x5067,
508 			    "htbt_counter=0x%x, htbt_monitor_enable=0x%x, "
509 			    "sfp_additonal_info=0x%x, sfp_multirate=0x%x.\n ",
510 			    htbt_counter, htbt_monitor_enable,
511 			    sfp_additonal_info, sfp_multirate);
512 			ql_log(ql_log_warn, vha, 0x5068,
513 			    "sfp_tx_fault=0x%x, link_state=0x%x, "
514 			    "dcbx_status=0x%x.\n", sfp_tx_fault, link_speed,
515 			    dcbx_status);
516 
517 			qla83xx_schedule_work(vha, QLA83XX_NIC_CORE_RESET);
518 		}
519 
520 		if (mb[1] & IDC_HEARTBEAT_FAILURE) {
521 			ql_log(ql_log_warn, vha, 0x5069,
522 			    "Heartbeat Failure encountered, chip reset "
523 			    "required.\n");
524 
525 			qla83xx_schedule_work(vha, QLA83XX_NIC_CORE_RESET);
526 		}
527 	}
528 
529 	if (mb[1] & IDC_DEVICE_STATE_CHANGE) {
530 		ql_log(ql_log_info, vha, 0x506a,
531 		    "IDC Device-State changed = 0x%x.\n", mb[4]);
532 		if (ha->flags.nic_core_reset_owner)
533 			return;
534 		qla83xx_schedule_work(vha, MBA_IDC_AEN);
535 	}
536 }
537 
538 int
539 qla2x00_is_a_vp_did(scsi_qla_host_t *vha, uint32_t rscn_entry)
540 {
541 	struct qla_hw_data *ha = vha->hw;
542 	scsi_qla_host_t *vp;
543 	uint32_t vp_did;
544 	unsigned long flags;
545 	int ret = 0;
546 
547 	if (!ha->num_vhosts)
548 		return ret;
549 
550 	spin_lock_irqsave(&ha->vport_slock, flags);
551 	list_for_each_entry(vp, &ha->vp_list, list) {
552 		vp_did = vp->d_id.b24;
553 		if (vp_did == rscn_entry) {
554 			ret = 1;
555 			break;
556 		}
557 	}
558 	spin_unlock_irqrestore(&ha->vport_slock, flags);
559 
560 	return ret;
561 }
562 
563 /**
564  * qla2x00_async_event() - Process aynchronous events.
565  * @ha: SCSI driver HA context
566  * @mb: Mailbox registers (0 - 3)
567  */
568 void
569 qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
570 {
571 	uint16_t	handle_cnt;
572 	uint16_t	cnt, mbx;
573 	uint32_t	handles[5];
574 	struct qla_hw_data *ha = vha->hw;
575 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
576 	struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
577 	struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82;
578 	uint32_t	rscn_entry, host_pid, tmp_pid;
579 	unsigned long	flags;
580 	fc_port_t	*fcport = NULL;
581 
582 	/* Setup to process RIO completion. */
583 	handle_cnt = 0;
584 	if (IS_CNA_CAPABLE(ha))
585 		goto skip_rio;
586 	switch (mb[0]) {
587 	case MBA_SCSI_COMPLETION:
588 		handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
589 		handle_cnt = 1;
590 		break;
591 	case MBA_CMPLT_1_16BIT:
592 		handles[0] = mb[1];
593 		handle_cnt = 1;
594 		mb[0] = MBA_SCSI_COMPLETION;
595 		break;
596 	case MBA_CMPLT_2_16BIT:
597 		handles[0] = mb[1];
598 		handles[1] = mb[2];
599 		handle_cnt = 2;
600 		mb[0] = MBA_SCSI_COMPLETION;
601 		break;
602 	case MBA_CMPLT_3_16BIT:
603 		handles[0] = mb[1];
604 		handles[1] = mb[2];
605 		handles[2] = mb[3];
606 		handle_cnt = 3;
607 		mb[0] = MBA_SCSI_COMPLETION;
608 		break;
609 	case MBA_CMPLT_4_16BIT:
610 		handles[0] = mb[1];
611 		handles[1] = mb[2];
612 		handles[2] = mb[3];
613 		handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6);
614 		handle_cnt = 4;
615 		mb[0] = MBA_SCSI_COMPLETION;
616 		break;
617 	case MBA_CMPLT_5_16BIT:
618 		handles[0] = mb[1];
619 		handles[1] = mb[2];
620 		handles[2] = mb[3];
621 		handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6);
622 		handles[4] = (uint32_t)RD_MAILBOX_REG(ha, reg, 7);
623 		handle_cnt = 5;
624 		mb[0] = MBA_SCSI_COMPLETION;
625 		break;
626 	case MBA_CMPLT_2_32BIT:
627 		handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
628 		handles[1] = le32_to_cpu(
629 		    ((uint32_t)(RD_MAILBOX_REG(ha, reg, 7) << 16)) |
630 		    RD_MAILBOX_REG(ha, reg, 6));
631 		handle_cnt = 2;
632 		mb[0] = MBA_SCSI_COMPLETION;
633 		break;
634 	default:
635 		break;
636 	}
637 skip_rio:
638 	switch (mb[0]) {
639 	case MBA_SCSI_COMPLETION:	/* Fast Post */
640 		if (!vha->flags.online)
641 			break;
642 
643 		for (cnt = 0; cnt < handle_cnt; cnt++)
644 			qla2x00_process_completed_request(vha, rsp->req,
645 				handles[cnt]);
646 		break;
647 
648 	case MBA_RESET:			/* Reset */
649 		ql_dbg(ql_dbg_async, vha, 0x5002,
650 		    "Asynchronous RESET.\n");
651 
652 		set_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
653 		break;
654 
655 	case MBA_SYSTEM_ERR:		/* System Error */
656 		mbx = (IS_QLA81XX(ha) || IS_QLA83XX(ha) || IS_QLA27XX(ha)) ?
657 			RD_REG_WORD(&reg24->mailbox7) : 0;
658 		ql_log(ql_log_warn, vha, 0x5003,
659 		    "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh "
660 		    "mbx7=%xh.\n", mb[1], mb[2], mb[3], mbx);
661 
662 		ha->isp_ops->fw_dump(vha, 1);
663 
664 		if (IS_FWI2_CAPABLE(ha)) {
665 			if (mb[1] == 0 && mb[2] == 0) {
666 				ql_log(ql_log_fatal, vha, 0x5004,
667 				    "Unrecoverable Hardware Error: adapter "
668 				    "marked OFFLINE!\n");
669 				vha->flags.online = 0;
670 				vha->device_flags |= DFLG_DEV_FAILED;
671 			} else {
672 				/* Check to see if MPI timeout occurred */
673 				if ((mbx & MBX_3) && (ha->port_no == 0))
674 					set_bit(MPI_RESET_NEEDED,
675 					    &vha->dpc_flags);
676 
677 				set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
678 			}
679 		} else if (mb[1] == 0) {
680 			ql_log(ql_log_fatal, vha, 0x5005,
681 			    "Unrecoverable Hardware Error: adapter marked "
682 			    "OFFLINE!\n");
683 			vha->flags.online = 0;
684 			vha->device_flags |= DFLG_DEV_FAILED;
685 		} else
686 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
687 		break;
688 
689 	case MBA_REQ_TRANSFER_ERR:	/* Request Transfer Error */
690 		ql_log(ql_log_warn, vha, 0x5006,
691 		    "ISP Request Transfer Error (%x).\n",  mb[1]);
692 
693 		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
694 		break;
695 
696 	case MBA_RSP_TRANSFER_ERR:	/* Response Transfer Error */
697 		ql_log(ql_log_warn, vha, 0x5007,
698 		    "ISP Response Transfer Error.\n");
699 
700 		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
701 		break;
702 
703 	case MBA_WAKEUP_THRES:		/* Request Queue Wake-up */
704 		ql_dbg(ql_dbg_async, vha, 0x5008,
705 		    "Asynchronous WAKEUP_THRES.\n");
706 
707 		break;
708 	case MBA_LIP_OCCURRED:		/* Loop Initialization Procedure */
709 		ql_dbg(ql_dbg_async, vha, 0x5009,
710 		    "LIP occurred (%x).\n", mb[1]);
711 
712 		if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
713 			atomic_set(&vha->loop_state, LOOP_DOWN);
714 			atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
715 			qla2x00_mark_all_devices_lost(vha, 1);
716 		}
717 
718 		if (vha->vp_idx) {
719 			atomic_set(&vha->vp_state, VP_FAILED);
720 			fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
721 		}
722 
723 		set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags);
724 		set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
725 
726 		vha->flags.management_server_logged_in = 0;
727 		qla2x00_post_aen_work(vha, FCH_EVT_LIP, mb[1]);
728 		break;
729 
730 	case MBA_LOOP_UP:		/* Loop Up Event */
731 		if (IS_QLA2100(ha) || IS_QLA2200(ha))
732 			ha->link_data_rate = PORT_SPEED_1GB;
733 		else
734 			ha->link_data_rate = mb[1];
735 
736 		ql_log(ql_log_info, vha, 0x500a,
737 		    "LOOP UP detected (%s Gbps).\n",
738 		    qla2x00_get_link_speed_str(ha, ha->link_data_rate));
739 
740 		vha->flags.management_server_logged_in = 0;
741 		qla2x00_post_aen_work(vha, FCH_EVT_LINKUP, ha->link_data_rate);
742 		break;
743 
744 	case MBA_LOOP_DOWN:		/* Loop Down Event */
745 		mbx = (IS_QLA81XX(ha) || IS_QLA8031(ha))
746 			? RD_REG_WORD(&reg24->mailbox4) : 0;
747 		mbx = (IS_P3P_TYPE(ha)) ? RD_REG_WORD(&reg82->mailbox_out[4])
748 			: mbx;
749 		ql_log(ql_log_info, vha, 0x500b,
750 		    "LOOP DOWN detected (%x %x %x %x).\n",
751 		    mb[1], mb[2], mb[3], mbx);
752 
753 		if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
754 			atomic_set(&vha->loop_state, LOOP_DOWN);
755 			atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
756 			/*
757 			 * In case of loop down, restore WWPN from
758 			 * NVRAM in case of FA-WWPN capable ISP
759 			 * Restore for Physical Port only
760 			 */
761 			if (!vha->vp_idx) {
762 				if (ha->flags.fawwpn_enabled) {
763 					void *wwpn = ha->init_cb->port_name;
764 					memcpy(vha->port_name, wwpn, WWN_SIZE);
765 					fc_host_port_name(vha->host) =
766 					    wwn_to_u64(vha->port_name);
767 					ql_dbg(ql_dbg_init + ql_dbg_verbose,
768 					    vha, 0x0144, "LOOP DOWN detected,"
769 					    "restore WWPN %016llx\n",
770 					    wwn_to_u64(vha->port_name));
771 				}
772 
773 				clear_bit(VP_CONFIG_OK, &vha->vp_flags);
774 			}
775 
776 			vha->device_flags |= DFLG_NO_CABLE;
777 			qla2x00_mark_all_devices_lost(vha, 1);
778 		}
779 
780 		if (vha->vp_idx) {
781 			atomic_set(&vha->vp_state, VP_FAILED);
782 			fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
783 		}
784 
785 		vha->flags.management_server_logged_in = 0;
786 		ha->link_data_rate = PORT_SPEED_UNKNOWN;
787 		qla2x00_post_aen_work(vha, FCH_EVT_LINKDOWN, 0);
788 		break;
789 
790 	case MBA_LIP_RESET:		/* LIP reset occurred */
791 		ql_dbg(ql_dbg_async, vha, 0x500c,
792 		    "LIP reset occurred (%x).\n", mb[1]);
793 
794 		if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
795 			atomic_set(&vha->loop_state, LOOP_DOWN);
796 			atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
797 			qla2x00_mark_all_devices_lost(vha, 1);
798 		}
799 
800 		if (vha->vp_idx) {
801 			atomic_set(&vha->vp_state, VP_FAILED);
802 			fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
803 		}
804 
805 		set_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
806 
807 		ha->operating_mode = LOOP;
808 		vha->flags.management_server_logged_in = 0;
809 		qla2x00_post_aen_work(vha, FCH_EVT_LIPRESET, mb[1]);
810 		break;
811 
812 	/* case MBA_DCBX_COMPLETE: */
813 	case MBA_POINT_TO_POINT:	/* Point-to-Point */
814 		if (IS_QLA2100(ha))
815 			break;
816 
817 		if (IS_CNA_CAPABLE(ha)) {
818 			ql_dbg(ql_dbg_async, vha, 0x500d,
819 			    "DCBX Completed -- %04x %04x %04x.\n",
820 			    mb[1], mb[2], mb[3]);
821 			if (ha->notify_dcbx_comp && !vha->vp_idx)
822 				complete(&ha->dcbx_comp);
823 
824 		} else
825 			ql_dbg(ql_dbg_async, vha, 0x500e,
826 			    "Asynchronous P2P MODE received.\n");
827 
828 		/*
829 		 * Until there's a transition from loop down to loop up, treat
830 		 * this as loop down only.
831 		 */
832 		if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
833 			atomic_set(&vha->loop_state, LOOP_DOWN);
834 			if (!atomic_read(&vha->loop_down_timer))
835 				atomic_set(&vha->loop_down_timer,
836 				    LOOP_DOWN_TIME);
837 			qla2x00_mark_all_devices_lost(vha, 1);
838 		}
839 
840 		if (vha->vp_idx) {
841 			atomic_set(&vha->vp_state, VP_FAILED);
842 			fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
843 		}
844 
845 		if (!(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)))
846 			set_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
847 
848 		set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags);
849 		set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
850 
851 		ha->flags.gpsc_supported = 1;
852 		vha->flags.management_server_logged_in = 0;
853 		break;
854 
855 	case MBA_CHG_IN_CONNECTION:	/* Change in connection mode */
856 		if (IS_QLA2100(ha))
857 			break;
858 
859 		ql_dbg(ql_dbg_async, vha, 0x500f,
860 		    "Configuration change detected: value=%x.\n", mb[1]);
861 
862 		if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
863 			atomic_set(&vha->loop_state, LOOP_DOWN);
864 			if (!atomic_read(&vha->loop_down_timer))
865 				atomic_set(&vha->loop_down_timer,
866 				    LOOP_DOWN_TIME);
867 			qla2x00_mark_all_devices_lost(vha, 1);
868 		}
869 
870 		if (vha->vp_idx) {
871 			atomic_set(&vha->vp_state, VP_FAILED);
872 			fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
873 		}
874 
875 		set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
876 		set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
877 		break;
878 
879 	case MBA_PORT_UPDATE:		/* Port database update */
880 		/*
881 		 * Handle only global and vn-port update events
882 		 *
883 		 * Relevant inputs:
884 		 * mb[1] = N_Port handle of changed port
885 		 * OR 0xffff for global event
886 		 * mb[2] = New login state
887 		 * 7 = Port logged out
888 		 * mb[3] = LSB is vp_idx, 0xff = all vps
889 		 *
890 		 * Skip processing if:
891 		 *       Event is global, vp_idx is NOT all vps,
892 		 *           vp_idx does not match
893 		 *       Event is not global, vp_idx does not match
894 		 */
895 		if (IS_QLA2XXX_MIDTYPE(ha) &&
896 		    ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff) ||
897 			(mb[1] != 0xffff)) && vha->vp_idx != (mb[3] & 0xff))
898 			break;
899 
900 		/* Global event -- port logout or port unavailable. */
901 		if (mb[1] == 0xffff && mb[2] == 0x7) {
902 			ql_dbg(ql_dbg_async, vha, 0x5010,
903 			    "Port unavailable %04x %04x %04x.\n",
904 			    mb[1], mb[2], mb[3]);
905 			ql_log(ql_log_warn, vha, 0x505e,
906 			    "Link is offline.\n");
907 
908 			if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
909 				atomic_set(&vha->loop_state, LOOP_DOWN);
910 				atomic_set(&vha->loop_down_timer,
911 				    LOOP_DOWN_TIME);
912 				vha->device_flags |= DFLG_NO_CABLE;
913 				qla2x00_mark_all_devices_lost(vha, 1);
914 			}
915 
916 			if (vha->vp_idx) {
917 				atomic_set(&vha->vp_state, VP_FAILED);
918 				fc_vport_set_state(vha->fc_vport,
919 				    FC_VPORT_FAILED);
920 				qla2x00_mark_all_devices_lost(vha, 1);
921 			}
922 
923 			vha->flags.management_server_logged_in = 0;
924 			ha->link_data_rate = PORT_SPEED_UNKNOWN;
925 			break;
926 		}
927 
928 		/*
929 		 * If PORT UPDATE is global (received LIP_OCCURRED/LIP_RESET
930 		 * event etc. earlier indicating loop is down) then process
931 		 * it.  Otherwise ignore it and Wait for RSCN to come in.
932 		 */
933 		atomic_set(&vha->loop_down_timer, 0);
934 		if (atomic_read(&vha->loop_state) != LOOP_DOWN &&
935 		    atomic_read(&vha->loop_state) != LOOP_DEAD) {
936 			ql_dbg(ql_dbg_async, vha, 0x5011,
937 			    "Asynchronous PORT UPDATE ignored %04x/%04x/%04x.\n",
938 			    mb[1], mb[2], mb[3]);
939 
940 			qlt_async_event(mb[0], vha, mb);
941 			break;
942 		}
943 
944 		ql_dbg(ql_dbg_async, vha, 0x5012,
945 		    "Port database changed %04x %04x %04x.\n",
946 		    mb[1], mb[2], mb[3]);
947 
948 		/*
949 		 * Mark all devices as missing so we will login again.
950 		 */
951 		atomic_set(&vha->loop_state, LOOP_UP);
952 
953 		qla2x00_mark_all_devices_lost(vha, 1);
954 
955 		if (vha->vp_idx == 0 && !qla_ini_mode_enabled(vha))
956 			set_bit(SCR_PENDING, &vha->dpc_flags);
957 
958 		set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
959 		set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
960 		set_bit(VP_CONFIG_OK, &vha->vp_flags);
961 
962 		qlt_async_event(mb[0], vha, mb);
963 		break;
964 
965 	case MBA_RSCN_UPDATE:		/* State Change Registration */
966 		/* Check if the Vport has issued a SCR */
967 		if (vha->vp_idx && test_bit(VP_SCR_NEEDED, &vha->vp_flags))
968 			break;
969 		/* Only handle SCNs for our Vport index. */
970 		if (ha->flags.npiv_supported && vha->vp_idx != (mb[3] & 0xff))
971 			break;
972 
973 		ql_dbg(ql_dbg_async, vha, 0x5013,
974 		    "RSCN database changed -- %04x %04x %04x.\n",
975 		    mb[1], mb[2], mb[3]);
976 
977 		rscn_entry = ((mb[1] & 0xff) << 16) | mb[2];
978 		host_pid = (vha->d_id.b.domain << 16) | (vha->d_id.b.area << 8)
979 				| vha->d_id.b.al_pa;
980 		if (rscn_entry == host_pid) {
981 			ql_dbg(ql_dbg_async, vha, 0x5014,
982 			    "Ignoring RSCN update to local host "
983 			    "port ID (%06x).\n", host_pid);
984 			break;
985 		}
986 
987 		/* Ignore reserved bits from RSCN-payload. */
988 		rscn_entry = ((mb[1] & 0x3ff) << 16) | mb[2];
989 
990 		/* Skip RSCNs for virtual ports on the same physical port */
991 		if (qla2x00_is_a_vp_did(vha, rscn_entry))
992 			break;
993 
994 		/*
995 		 * Search for the rport related to this RSCN entry and mark it
996 		 * as lost.
997 		 */
998 		list_for_each_entry(fcport, &vha->vp_fcports, list) {
999 			if (atomic_read(&fcport->state) != FCS_ONLINE)
1000 				continue;
1001 			tmp_pid = fcport->d_id.b24;
1002 			if (fcport->d_id.b24 == rscn_entry) {
1003 				qla2x00_mark_device_lost(vha, fcport, 0, 0);
1004 				break;
1005 			}
1006 		}
1007 
1008 		atomic_set(&vha->loop_down_timer, 0);
1009 		vha->flags.management_server_logged_in = 0;
1010 
1011 		set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
1012 		set_bit(RSCN_UPDATE, &vha->dpc_flags);
1013 		qla2x00_post_aen_work(vha, FCH_EVT_RSCN, rscn_entry);
1014 		break;
1015 
1016 	/* case MBA_RIO_RESPONSE: */
1017 	case MBA_ZIO_RESPONSE:
1018 		ql_dbg(ql_dbg_async, vha, 0x5015,
1019 		    "[R|Z]IO update completion.\n");
1020 
1021 		if (IS_FWI2_CAPABLE(ha))
1022 			qla24xx_process_response_queue(vha, rsp);
1023 		else
1024 			qla2x00_process_response_queue(rsp);
1025 		break;
1026 
1027 	case MBA_DISCARD_RND_FRAME:
1028 		ql_dbg(ql_dbg_async, vha, 0x5016,
1029 		    "Discard RND Frame -- %04x %04x %04x.\n",
1030 		    mb[1], mb[2], mb[3]);
1031 		break;
1032 
1033 	case MBA_TRACE_NOTIFICATION:
1034 		ql_dbg(ql_dbg_async, vha, 0x5017,
1035 		    "Trace Notification -- %04x %04x.\n", mb[1], mb[2]);
1036 		break;
1037 
1038 	case MBA_ISP84XX_ALERT:
1039 		ql_dbg(ql_dbg_async, vha, 0x5018,
1040 		    "ISP84XX Alert Notification -- %04x %04x %04x.\n",
1041 		    mb[1], mb[2], mb[3]);
1042 
1043 		spin_lock_irqsave(&ha->cs84xx->access_lock, flags);
1044 		switch (mb[1]) {
1045 		case A84_PANIC_RECOVERY:
1046 			ql_log(ql_log_info, vha, 0x5019,
1047 			    "Alert 84XX: panic recovery %04x %04x.\n",
1048 			    mb[2], mb[3]);
1049 			break;
1050 		case A84_OP_LOGIN_COMPLETE:
1051 			ha->cs84xx->op_fw_version = mb[3] << 16 | mb[2];
1052 			ql_log(ql_log_info, vha, 0x501a,
1053 			    "Alert 84XX: firmware version %x.\n",
1054 			    ha->cs84xx->op_fw_version);
1055 			break;
1056 		case A84_DIAG_LOGIN_COMPLETE:
1057 			ha->cs84xx->diag_fw_version = mb[3] << 16 | mb[2];
1058 			ql_log(ql_log_info, vha, 0x501b,
1059 			    "Alert 84XX: diagnostic firmware version %x.\n",
1060 			    ha->cs84xx->diag_fw_version);
1061 			break;
1062 		case A84_GOLD_LOGIN_COMPLETE:
1063 			ha->cs84xx->diag_fw_version = mb[3] << 16 | mb[2];
1064 			ha->cs84xx->fw_update = 1;
1065 			ql_log(ql_log_info, vha, 0x501c,
1066 			    "Alert 84XX: gold firmware version %x.\n",
1067 			    ha->cs84xx->gold_fw_version);
1068 			break;
1069 		default:
1070 			ql_log(ql_log_warn, vha, 0x501d,
1071 			    "Alert 84xx: Invalid Alert %04x %04x %04x.\n",
1072 			    mb[1], mb[2], mb[3]);
1073 		}
1074 		spin_unlock_irqrestore(&ha->cs84xx->access_lock, flags);
1075 		break;
1076 	case MBA_DCBX_START:
1077 		ql_dbg(ql_dbg_async, vha, 0x501e,
1078 		    "DCBX Started -- %04x %04x %04x.\n",
1079 		    mb[1], mb[2], mb[3]);
1080 		break;
1081 	case MBA_DCBX_PARAM_UPDATE:
1082 		ql_dbg(ql_dbg_async, vha, 0x501f,
1083 		    "DCBX Parameters Updated -- %04x %04x %04x.\n",
1084 		    mb[1], mb[2], mb[3]);
1085 		break;
1086 	case MBA_FCF_CONF_ERR:
1087 		ql_dbg(ql_dbg_async, vha, 0x5020,
1088 		    "FCF Configuration Error -- %04x %04x %04x.\n",
1089 		    mb[1], mb[2], mb[3]);
1090 		break;
1091 	case MBA_IDC_NOTIFY:
1092 		if (IS_QLA8031(vha->hw) || IS_QLA8044(ha)) {
1093 			mb[4] = RD_REG_WORD(&reg24->mailbox4);
1094 			if (((mb[2] & 0x7fff) == MBC_PORT_RESET ||
1095 			    (mb[2] & 0x7fff) == MBC_SET_PORT_CONFIG) &&
1096 			    (mb[4] & INTERNAL_LOOPBACK_MASK) != 0) {
1097 				set_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags);
1098 				/*
1099 				 * Extend loop down timer since port is active.
1100 				 */
1101 				if (atomic_read(&vha->loop_state) == LOOP_DOWN)
1102 					atomic_set(&vha->loop_down_timer,
1103 					    LOOP_DOWN_TIME);
1104 				qla2xxx_wake_dpc(vha);
1105 			}
1106 		}
1107 	case MBA_IDC_COMPLETE:
1108 		if (ha->notify_lb_portup_comp && !vha->vp_idx)
1109 			complete(&ha->lb_portup_comp);
1110 		/* Fallthru */
1111 	case MBA_IDC_TIME_EXT:
1112 		if (IS_QLA81XX(vha->hw) || IS_QLA8031(vha->hw) ||
1113 		    IS_QLA8044(ha))
1114 			qla81xx_idc_event(vha, mb[0], mb[1]);
1115 		break;
1116 
1117 	case MBA_IDC_AEN:
1118 		mb[4] = RD_REG_WORD(&reg24->mailbox4);
1119 		mb[5] = RD_REG_WORD(&reg24->mailbox5);
1120 		mb[6] = RD_REG_WORD(&reg24->mailbox6);
1121 		mb[7] = RD_REG_WORD(&reg24->mailbox7);
1122 		qla83xx_handle_8200_aen(vha, mb);
1123 		break;
1124 
1125 	case MBA_DPORT_DIAGNOSTICS:
1126 		ql_dbg(ql_dbg_async, vha, 0x5052,
1127 		    "D-Port Diagnostics: %04x %04x=%s\n", mb[0], mb[1],
1128 		    mb[1] == 0 ? "start" :
1129 		    mb[1] == 1 ? "done (ok)" :
1130 		    mb[1] == 2 ? "done (error)" : "other");
1131 		break;
1132 
1133 	default:
1134 		ql_dbg(ql_dbg_async, vha, 0x5057,
1135 		    "Unknown AEN:%04x %04x %04x %04x\n",
1136 		    mb[0], mb[1], mb[2], mb[3]);
1137 	}
1138 
1139 	qlt_async_event(mb[0], vha, mb);
1140 
1141 	if (!vha->vp_idx && ha->num_vhosts)
1142 		qla2x00_alert_all_vps(rsp, mb);
1143 }
1144 
1145 /**
1146  * qla2x00_process_completed_request() - Process a Fast Post response.
1147  * @ha: SCSI driver HA context
1148  * @index: SRB index
1149  */
1150 void
1151 qla2x00_process_completed_request(struct scsi_qla_host *vha,
1152 				  struct req_que *req, uint32_t index)
1153 {
1154 	srb_t *sp;
1155 	struct qla_hw_data *ha = vha->hw;
1156 
1157 	/* Validate handle. */
1158 	if (index >= req->num_outstanding_cmds) {
1159 		ql_log(ql_log_warn, vha, 0x3014,
1160 		    "Invalid SCSI command index (%x).\n", index);
1161 
1162 		if (IS_P3P_TYPE(ha))
1163 			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
1164 		else
1165 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
1166 		return;
1167 	}
1168 
1169 	sp = req->outstanding_cmds[index];
1170 	if (sp) {
1171 		/* Free outstanding command slot. */
1172 		req->outstanding_cmds[index] = NULL;
1173 
1174 		/* Save ISP completion status */
1175 		sp->done(ha, sp, DID_OK << 16);
1176 	} else {
1177 		ql_log(ql_log_warn, vha, 0x3016, "Invalid SCSI SRB.\n");
1178 
1179 		if (IS_P3P_TYPE(ha))
1180 			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
1181 		else
1182 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
1183 	}
1184 }
1185 
1186 srb_t *
1187 qla2x00_get_sp_from_handle(scsi_qla_host_t *vha, const char *func,
1188     struct req_que *req, void *iocb)
1189 {
1190 	struct qla_hw_data *ha = vha->hw;
1191 	sts_entry_t *pkt = iocb;
1192 	srb_t *sp = NULL;
1193 	uint16_t index;
1194 
1195 	index = LSW(pkt->handle);
1196 	if (index >= req->num_outstanding_cmds) {
1197 		ql_log(ql_log_warn, vha, 0x5031,
1198 		    "Invalid command index (%x).\n", index);
1199 		if (IS_P3P_TYPE(ha))
1200 			set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
1201 		else
1202 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
1203 		goto done;
1204 	}
1205 	sp = req->outstanding_cmds[index];
1206 	if (!sp) {
1207 		ql_log(ql_log_warn, vha, 0x5032,
1208 		    "Invalid completion handle (%x) -- timed-out.\n", index);
1209 		return sp;
1210 	}
1211 	if (sp->handle != index) {
1212 		ql_log(ql_log_warn, vha, 0x5033,
1213 		    "SRB handle (%x) mismatch %x.\n", sp->handle, index);
1214 		return NULL;
1215 	}
1216 
1217 	req->outstanding_cmds[index] = NULL;
1218 
1219 done:
1220 	return sp;
1221 }
1222 
1223 static void
1224 qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
1225     struct mbx_entry *mbx)
1226 {
1227 	const char func[] = "MBX-IOCB";
1228 	const char *type;
1229 	fc_port_t *fcport;
1230 	srb_t *sp;
1231 	struct srb_iocb *lio;
1232 	uint16_t *data;
1233 	uint16_t status;
1234 
1235 	sp = qla2x00_get_sp_from_handle(vha, func, req, mbx);
1236 	if (!sp)
1237 		return;
1238 
1239 	lio = &sp->u.iocb_cmd;
1240 	type = sp->name;
1241 	fcport = sp->fcport;
1242 	data = lio->u.logio.data;
1243 
1244 	data[0] = MBS_COMMAND_ERROR;
1245 	data[1] = lio->u.logio.flags & SRB_LOGIN_RETRIED ?
1246 	    QLA_LOGIO_LOGIN_RETRIED : 0;
1247 	if (mbx->entry_status) {
1248 		ql_dbg(ql_dbg_async, vha, 0x5043,
1249 		    "Async-%s error entry - hdl=%x portid=%02x%02x%02x "
1250 		    "entry-status=%x status=%x state-flag=%x "
1251 		    "status-flags=%x.\n", type, sp->handle,
1252 		    fcport->d_id.b.domain, fcport->d_id.b.area,
1253 		    fcport->d_id.b.al_pa, mbx->entry_status,
1254 		    le16_to_cpu(mbx->status), le16_to_cpu(mbx->state_flags),
1255 		    le16_to_cpu(mbx->status_flags));
1256 
1257 		ql_dump_buffer(ql_dbg_async + ql_dbg_buffer, vha, 0x5029,
1258 		    (uint8_t *)mbx, sizeof(*mbx));
1259 
1260 		goto logio_done;
1261 	}
1262 
1263 	status = le16_to_cpu(mbx->status);
1264 	if (status == 0x30 && sp->type == SRB_LOGIN_CMD &&
1265 	    le16_to_cpu(mbx->mb0) == MBS_COMMAND_COMPLETE)
1266 		status = 0;
1267 	if (!status && le16_to_cpu(mbx->mb0) == MBS_COMMAND_COMPLETE) {
1268 		ql_dbg(ql_dbg_async, vha, 0x5045,
1269 		    "Async-%s complete - hdl=%x portid=%02x%02x%02x mbx1=%x.\n",
1270 		    type, sp->handle, fcport->d_id.b.domain,
1271 		    fcport->d_id.b.area, fcport->d_id.b.al_pa,
1272 		    le16_to_cpu(mbx->mb1));
1273 
1274 		data[0] = MBS_COMMAND_COMPLETE;
1275 		if (sp->type == SRB_LOGIN_CMD) {
1276 			fcport->port_type = FCT_TARGET;
1277 			if (le16_to_cpu(mbx->mb1) & BIT_0)
1278 				fcport->port_type = FCT_INITIATOR;
1279 			else if (le16_to_cpu(mbx->mb1) & BIT_1)
1280 				fcport->flags |= FCF_FCP2_DEVICE;
1281 		}
1282 		goto logio_done;
1283 	}
1284 
1285 	data[0] = le16_to_cpu(mbx->mb0);
1286 	switch (data[0]) {
1287 	case MBS_PORT_ID_USED:
1288 		data[1] = le16_to_cpu(mbx->mb1);
1289 		break;
1290 	case MBS_LOOP_ID_USED:
1291 		break;
1292 	default:
1293 		data[0] = MBS_COMMAND_ERROR;
1294 		break;
1295 	}
1296 
1297 	ql_log(ql_log_warn, vha, 0x5046,
1298 	    "Async-%s failed - hdl=%x portid=%02x%02x%02x status=%x "
1299 	    "mb0=%x mb1=%x mb2=%x mb6=%x mb7=%x.\n", type, sp->handle,
1300 	    fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa,
1301 	    status, le16_to_cpu(mbx->mb0), le16_to_cpu(mbx->mb1),
1302 	    le16_to_cpu(mbx->mb2), le16_to_cpu(mbx->mb6),
1303 	    le16_to_cpu(mbx->mb7));
1304 
1305 logio_done:
1306 	sp->done(vha, sp, 0);
1307 }
1308 
1309 static void
1310 qla2x00_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
1311     sts_entry_t *pkt, int iocb_type)
1312 {
1313 	const char func[] = "CT_IOCB";
1314 	const char *type;
1315 	srb_t *sp;
1316 	struct fc_bsg_job *bsg_job;
1317 	uint16_t comp_status;
1318 	int res;
1319 
1320 	sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
1321 	if (!sp)
1322 		return;
1323 
1324 	bsg_job = sp->u.bsg_job;
1325 
1326 	type = "ct pass-through";
1327 
1328 	comp_status = le16_to_cpu(pkt->comp_status);
1329 
1330 	/* return FC_CTELS_STATUS_OK and leave the decoding of the ELS/CT
1331 	 * fc payload  to the caller
1332 	 */
1333 	bsg_job->reply->reply_data.ctels_reply.status = FC_CTELS_STATUS_OK;
1334 	bsg_job->reply_len = sizeof(struct fc_bsg_reply);
1335 
1336 	if (comp_status != CS_COMPLETE) {
1337 		if (comp_status == CS_DATA_UNDERRUN) {
1338 			res = DID_OK << 16;
1339 			bsg_job->reply->reply_payload_rcv_len =
1340 			    le16_to_cpu(((sts_entry_t *)pkt)->rsp_info_len);
1341 
1342 			ql_log(ql_log_warn, vha, 0x5048,
1343 			    "CT pass-through-%s error "
1344 			    "comp_status-status=0x%x total_byte = 0x%x.\n",
1345 			    type, comp_status,
1346 			    bsg_job->reply->reply_payload_rcv_len);
1347 		} else {
1348 			ql_log(ql_log_warn, vha, 0x5049,
1349 			    "CT pass-through-%s error "
1350 			    "comp_status-status=0x%x.\n", type, comp_status);
1351 			res = DID_ERROR << 16;
1352 			bsg_job->reply->reply_payload_rcv_len = 0;
1353 		}
1354 		ql_dump_buffer(ql_dbg_async + ql_dbg_buffer, vha, 0x5035,
1355 		    (uint8_t *)pkt, sizeof(*pkt));
1356 	} else {
1357 		res = DID_OK << 16;
1358 		bsg_job->reply->reply_payload_rcv_len =
1359 		    bsg_job->reply_payload.payload_len;
1360 		bsg_job->reply_len = 0;
1361 	}
1362 
1363 	sp->done(vha, sp, res);
1364 }
1365 
1366 static void
1367 qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
1368     struct sts_entry_24xx *pkt, int iocb_type)
1369 {
1370 	const char func[] = "ELS_CT_IOCB";
1371 	const char *type;
1372 	srb_t *sp;
1373 	struct fc_bsg_job *bsg_job;
1374 	uint16_t comp_status;
1375 	uint32_t fw_status[3];
1376 	uint8_t* fw_sts_ptr;
1377 	int res;
1378 
1379 	sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
1380 	if (!sp)
1381 		return;
1382 	bsg_job = sp->u.bsg_job;
1383 
1384 	type = NULL;
1385 	switch (sp->type) {
1386 	case SRB_ELS_CMD_RPT:
1387 	case SRB_ELS_CMD_HST:
1388 		type = "els";
1389 		break;
1390 	case SRB_CT_CMD:
1391 		type = "ct pass-through";
1392 		break;
1393 	default:
1394 		ql_dbg(ql_dbg_user, vha, 0x503e,
1395 		    "Unrecognized SRB: (%p) type=%d.\n", sp, sp->type);
1396 		return;
1397 	}
1398 
1399 	comp_status = fw_status[0] = le16_to_cpu(pkt->comp_status);
1400 	fw_status[1] = le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->error_subcode_1);
1401 	fw_status[2] = le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->error_subcode_2);
1402 
1403 	/* return FC_CTELS_STATUS_OK and leave the decoding of the ELS/CT
1404 	 * fc payload  to the caller
1405 	 */
1406 	bsg_job->reply->reply_data.ctels_reply.status = FC_CTELS_STATUS_OK;
1407 	bsg_job->reply_len = sizeof(struct fc_bsg_reply) + sizeof(fw_status);
1408 
1409 	if (comp_status != CS_COMPLETE) {
1410 		if (comp_status == CS_DATA_UNDERRUN) {
1411 			res = DID_OK << 16;
1412 			bsg_job->reply->reply_payload_rcv_len =
1413 			    le16_to_cpu(((struct els_sts_entry_24xx *)pkt)->total_byte_count);
1414 
1415 			ql_dbg(ql_dbg_user, vha, 0x503f,
1416 			    "ELS-CT pass-through-%s error hdl=%x comp_status-status=0x%x "
1417 			    "error subcode 1=0x%x error subcode 2=0x%x total_byte = 0x%x.\n",
1418 			    type, sp->handle, comp_status, fw_status[1], fw_status[2],
1419 			    le16_to_cpu(((struct els_sts_entry_24xx *)
1420 				pkt)->total_byte_count));
1421 			fw_sts_ptr = ((uint8_t*)bsg_job->req->sense) + sizeof(struct fc_bsg_reply);
1422 			memcpy( fw_sts_ptr, fw_status, sizeof(fw_status));
1423 		}
1424 		else {
1425 			ql_dbg(ql_dbg_user, vha, 0x5040,
1426 			    "ELS-CT pass-through-%s error hdl=%x comp_status-status=0x%x "
1427 			    "error subcode 1=0x%x error subcode 2=0x%x.\n",
1428 			    type, sp->handle, comp_status,
1429 			    le16_to_cpu(((struct els_sts_entry_24xx *)
1430 				pkt)->error_subcode_1),
1431 			    le16_to_cpu(((struct els_sts_entry_24xx *)
1432 				    pkt)->error_subcode_2));
1433 			res = DID_ERROR << 16;
1434 			bsg_job->reply->reply_payload_rcv_len = 0;
1435 			fw_sts_ptr = ((uint8_t*)bsg_job->req->sense) + sizeof(struct fc_bsg_reply);
1436 			memcpy( fw_sts_ptr, fw_status, sizeof(fw_status));
1437 		}
1438 		ql_dump_buffer(ql_dbg_user + ql_dbg_buffer, vha, 0x5056,
1439 				(uint8_t *)pkt, sizeof(*pkt));
1440 	}
1441 	else {
1442 		res =  DID_OK << 16;
1443 		bsg_job->reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len;
1444 		bsg_job->reply_len = 0;
1445 	}
1446 
1447 	sp->done(vha, sp, res);
1448 }
1449 
1450 static void
1451 qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
1452     struct logio_entry_24xx *logio)
1453 {
1454 	const char func[] = "LOGIO-IOCB";
1455 	const char *type;
1456 	fc_port_t *fcport;
1457 	srb_t *sp;
1458 	struct srb_iocb *lio;
1459 	uint16_t *data;
1460 	uint32_t iop[2];
1461 
1462 	sp = qla2x00_get_sp_from_handle(vha, func, req, logio);
1463 	if (!sp)
1464 		return;
1465 
1466 	lio = &sp->u.iocb_cmd;
1467 	type = sp->name;
1468 	fcport = sp->fcport;
1469 	data = lio->u.logio.data;
1470 
1471 	data[0] = MBS_COMMAND_ERROR;
1472 	data[1] = lio->u.logio.flags & SRB_LOGIN_RETRIED ?
1473 		QLA_LOGIO_LOGIN_RETRIED : 0;
1474 	if (logio->entry_status) {
1475 		ql_log(ql_log_warn, fcport->vha, 0x5034,
1476 		    "Async-%s error entry - hdl=%x"
1477 		    "portid=%02x%02x%02x entry-status=%x.\n",
1478 		    type, sp->handle, fcport->d_id.b.domain,
1479 		    fcport->d_id.b.area, fcport->d_id.b.al_pa,
1480 		    logio->entry_status);
1481 		ql_dump_buffer(ql_dbg_async + ql_dbg_buffer, vha, 0x504d,
1482 		    (uint8_t *)logio, sizeof(*logio));
1483 
1484 		goto logio_done;
1485 	}
1486 
1487 	if (le16_to_cpu(logio->comp_status) == CS_COMPLETE) {
1488 		ql_dbg(ql_dbg_async, fcport->vha, 0x5036,
1489 		    "Async-%s complete - hdl=%x portid=%02x%02x%02x "
1490 		    "iop0=%x.\n", type, sp->handle, fcport->d_id.b.domain,
1491 		    fcport->d_id.b.area, fcport->d_id.b.al_pa,
1492 		    le32_to_cpu(logio->io_parameter[0]));
1493 
1494 		data[0] = MBS_COMMAND_COMPLETE;
1495 		if (sp->type != SRB_LOGIN_CMD)
1496 			goto logio_done;
1497 
1498 		iop[0] = le32_to_cpu(logio->io_parameter[0]);
1499 		if (iop[0] & BIT_4) {
1500 			fcport->port_type = FCT_TARGET;
1501 			if (iop[0] & BIT_8)
1502 				fcport->flags |= FCF_FCP2_DEVICE;
1503 		} else if (iop[0] & BIT_5)
1504 			fcport->port_type = FCT_INITIATOR;
1505 
1506 		if (iop[0] & BIT_7)
1507 			fcport->flags |= FCF_CONF_COMP_SUPPORTED;
1508 
1509 		if (logio->io_parameter[7] || logio->io_parameter[8])
1510 			fcport->supported_classes |= FC_COS_CLASS2;
1511 		if (logio->io_parameter[9] || logio->io_parameter[10])
1512 			fcport->supported_classes |= FC_COS_CLASS3;
1513 
1514 		goto logio_done;
1515 	}
1516 
1517 	iop[0] = le32_to_cpu(logio->io_parameter[0]);
1518 	iop[1] = le32_to_cpu(logio->io_parameter[1]);
1519 	switch (iop[0]) {
1520 	case LSC_SCODE_PORTID_USED:
1521 		data[0] = MBS_PORT_ID_USED;
1522 		data[1] = LSW(iop[1]);
1523 		break;
1524 	case LSC_SCODE_NPORT_USED:
1525 		data[0] = MBS_LOOP_ID_USED;
1526 		break;
1527 	default:
1528 		data[0] = MBS_COMMAND_ERROR;
1529 		break;
1530 	}
1531 
1532 	ql_dbg(ql_dbg_async, fcport->vha, 0x5037,
1533 	    "Async-%s failed - hdl=%x portid=%02x%02x%02x comp=%x "
1534 	    "iop0=%x iop1=%x.\n", type, sp->handle, fcport->d_id.b.domain,
1535 	    fcport->d_id.b.area, fcport->d_id.b.al_pa,
1536 	    le16_to_cpu(logio->comp_status),
1537 	    le32_to_cpu(logio->io_parameter[0]),
1538 	    le32_to_cpu(logio->io_parameter[1]));
1539 
1540 logio_done:
1541 	sp->done(vha, sp, 0);
1542 }
1543 
1544 static void
1545 qla24xx_tm_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, void *tsk)
1546 {
1547 	const char func[] = "TMF-IOCB";
1548 	const char *type;
1549 	fc_port_t *fcport;
1550 	srb_t *sp;
1551 	struct srb_iocb *iocb;
1552 	struct sts_entry_24xx *sts = (struct sts_entry_24xx *)tsk;
1553 
1554 	sp = qla2x00_get_sp_from_handle(vha, func, req, tsk);
1555 	if (!sp)
1556 		return;
1557 
1558 	iocb = &sp->u.iocb_cmd;
1559 	type = sp->name;
1560 	fcport = sp->fcport;
1561 	iocb->u.tmf.data = QLA_SUCCESS;
1562 
1563 	if (sts->entry_status) {
1564 		ql_log(ql_log_warn, fcport->vha, 0x5038,
1565 		    "Async-%s error - hdl=%x entry-status(%x).\n",
1566 		    type, sp->handle, sts->entry_status);
1567 		iocb->u.tmf.data = QLA_FUNCTION_FAILED;
1568 	} else if (sts->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) {
1569 		ql_log(ql_log_warn, fcport->vha, 0x5039,
1570 		    "Async-%s error - hdl=%x completion status(%x).\n",
1571 		    type, sp->handle, sts->comp_status);
1572 		iocb->u.tmf.data = QLA_FUNCTION_FAILED;
1573 	} else if ((le16_to_cpu(sts->scsi_status) &
1574 	    SS_RESPONSE_INFO_LEN_VALID)) {
1575 		if (le32_to_cpu(sts->rsp_data_len) < 4) {
1576 			ql_log(ql_log_warn, fcport->vha, 0x503b,
1577 			    "Async-%s error - hdl=%x not enough response(%d).\n",
1578 			    type, sp->handle, sts->rsp_data_len);
1579 		} else if (sts->data[3]) {
1580 			ql_log(ql_log_warn, fcport->vha, 0x503c,
1581 			    "Async-%s error - hdl=%x response(%x).\n",
1582 			    type, sp->handle, sts->data[3]);
1583 		iocb->u.tmf.data = QLA_FUNCTION_FAILED;
1584 		}
1585 	}
1586 
1587 	if (iocb->u.tmf.data != QLA_SUCCESS)
1588 		ql_dump_buffer(ql_dbg_async + ql_dbg_buffer, vha, 0x5055,
1589 		    (uint8_t *)sts, sizeof(*sts));
1590 
1591 	sp->done(vha, sp, 0);
1592 }
1593 
1594 /**
1595  * qla2x00_process_response_queue() - Process response queue entries.
1596  * @ha: SCSI driver HA context
1597  */
1598 void
1599 qla2x00_process_response_queue(struct rsp_que *rsp)
1600 {
1601 	struct scsi_qla_host *vha;
1602 	struct qla_hw_data *ha = rsp->hw;
1603 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1604 	sts_entry_t	*pkt;
1605 	uint16_t        handle_cnt;
1606 	uint16_t        cnt;
1607 
1608 	vha = pci_get_drvdata(ha->pdev);
1609 
1610 	if (!vha->flags.online)
1611 		return;
1612 
1613 	while (rsp->ring_ptr->signature != RESPONSE_PROCESSED) {
1614 		pkt = (sts_entry_t *)rsp->ring_ptr;
1615 
1616 		rsp->ring_index++;
1617 		if (rsp->ring_index == rsp->length) {
1618 			rsp->ring_index = 0;
1619 			rsp->ring_ptr = rsp->ring;
1620 		} else {
1621 			rsp->ring_ptr++;
1622 		}
1623 
1624 		if (pkt->entry_status != 0) {
1625 			qla2x00_error_entry(vha, rsp, pkt);
1626 			((response_t *)pkt)->signature = RESPONSE_PROCESSED;
1627 			wmb();
1628 			continue;
1629 		}
1630 
1631 		switch (pkt->entry_type) {
1632 		case STATUS_TYPE:
1633 			qla2x00_status_entry(vha, rsp, pkt);
1634 			break;
1635 		case STATUS_TYPE_21:
1636 			handle_cnt = ((sts21_entry_t *)pkt)->handle_count;
1637 			for (cnt = 0; cnt < handle_cnt; cnt++) {
1638 				qla2x00_process_completed_request(vha, rsp->req,
1639 				    ((sts21_entry_t *)pkt)->handle[cnt]);
1640 			}
1641 			break;
1642 		case STATUS_TYPE_22:
1643 			handle_cnt = ((sts22_entry_t *)pkt)->handle_count;
1644 			for (cnt = 0; cnt < handle_cnt; cnt++) {
1645 				qla2x00_process_completed_request(vha, rsp->req,
1646 				    ((sts22_entry_t *)pkt)->handle[cnt]);
1647 			}
1648 			break;
1649 		case STATUS_CONT_TYPE:
1650 			qla2x00_status_cont_entry(rsp, (sts_cont_entry_t *)pkt);
1651 			break;
1652 		case MBX_IOCB_TYPE:
1653 			qla2x00_mbx_iocb_entry(vha, rsp->req,
1654 			    (struct mbx_entry *)pkt);
1655 			break;
1656 		case CT_IOCB_TYPE:
1657 			qla2x00_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE);
1658 			break;
1659 		default:
1660 			/* Type Not Supported. */
1661 			ql_log(ql_log_warn, vha, 0x504a,
1662 			    "Received unknown response pkt type %x "
1663 			    "entry status=%x.\n",
1664 			    pkt->entry_type, pkt->entry_status);
1665 			break;
1666 		}
1667 		((response_t *)pkt)->signature = RESPONSE_PROCESSED;
1668 		wmb();
1669 	}
1670 
1671 	/* Adjust ring index */
1672 	WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), rsp->ring_index);
1673 }
1674 
1675 static inline void
1676 qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t par_sense_len,
1677 		     uint32_t sense_len, struct rsp_que *rsp, int res)
1678 {
1679 	struct scsi_qla_host *vha = sp->fcport->vha;
1680 	struct scsi_cmnd *cp = GET_CMD_SP(sp);
1681 	uint32_t track_sense_len;
1682 
1683 	if (sense_len >= SCSI_SENSE_BUFFERSIZE)
1684 		sense_len = SCSI_SENSE_BUFFERSIZE;
1685 
1686 	SET_CMD_SENSE_LEN(sp, sense_len);
1687 	SET_CMD_SENSE_PTR(sp, cp->sense_buffer);
1688 	track_sense_len = sense_len;
1689 
1690 	if (sense_len > par_sense_len)
1691 		sense_len = par_sense_len;
1692 
1693 	memcpy(cp->sense_buffer, sense_data, sense_len);
1694 
1695 	SET_CMD_SENSE_PTR(sp, cp->sense_buffer + sense_len);
1696 	track_sense_len -= sense_len;
1697 	SET_CMD_SENSE_LEN(sp, track_sense_len);
1698 
1699 	if (track_sense_len != 0) {
1700 		rsp->status_srb = sp;
1701 		cp->result = res;
1702 	}
1703 
1704 	if (sense_len) {
1705 		ql_dbg(ql_dbg_io + ql_dbg_buffer, vha, 0x301c,
1706 		    "Check condition Sense data, nexus%ld:%d:%llu cmd=%p.\n",
1707 		    sp->fcport->vha->host_no, cp->device->id, cp->device->lun,
1708 		    cp);
1709 		ql_dump_buffer(ql_dbg_io + ql_dbg_buffer, vha, 0x302b,
1710 		    cp->sense_buffer, sense_len);
1711 	}
1712 }
1713 
1714 struct scsi_dif_tuple {
1715 	__be16 guard;       /* Checksum */
1716 	__be16 app_tag;         /* APPL identifier */
1717 	__be32 ref_tag;         /* Target LBA or indirect LBA */
1718 };
1719 
1720 /*
1721  * Checks the guard or meta-data for the type of error
1722  * detected by the HBA. In case of errors, we set the
1723  * ASC/ASCQ fields in the sense buffer with ILLEGAL_REQUEST
1724  * to indicate to the kernel that the HBA detected error.
1725  */
1726 static inline int
1727 qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)
1728 {
1729 	struct scsi_qla_host *vha = sp->fcport->vha;
1730 	struct scsi_cmnd *cmd = GET_CMD_SP(sp);
1731 	uint8_t		*ap = &sts24->data[12];
1732 	uint8_t		*ep = &sts24->data[20];
1733 	uint32_t	e_ref_tag, a_ref_tag;
1734 	uint16_t	e_app_tag, a_app_tag;
1735 	uint16_t	e_guard, a_guard;
1736 
1737 	/*
1738 	 * swab32 of the "data" field in the beginning of qla2x00_status_entry()
1739 	 * would make guard field appear at offset 2
1740 	 */
1741 	a_guard   = le16_to_cpu(*(uint16_t *)(ap + 2));
1742 	a_app_tag = le16_to_cpu(*(uint16_t *)(ap + 0));
1743 	a_ref_tag = le32_to_cpu(*(uint32_t *)(ap + 4));
1744 	e_guard   = le16_to_cpu(*(uint16_t *)(ep + 2));
1745 	e_app_tag = le16_to_cpu(*(uint16_t *)(ep + 0));
1746 	e_ref_tag = le32_to_cpu(*(uint32_t *)(ep + 4));
1747 
1748 	ql_dbg(ql_dbg_io, vha, 0x3023,
1749 	    "iocb(s) %p Returned STATUS.\n", sts24);
1750 
1751 	ql_dbg(ql_dbg_io, vha, 0x3024,
1752 	    "DIF ERROR in cmd 0x%x lba 0x%llx act ref"
1753 	    " tag=0x%x, exp ref_tag=0x%x, act app tag=0x%x, exp app"
1754 	    " tag=0x%x, act guard=0x%x, exp guard=0x%x.\n",
1755 	    cmd->cmnd[0], (u64)scsi_get_lba(cmd), a_ref_tag, e_ref_tag,
1756 	    a_app_tag, e_app_tag, a_guard, e_guard);
1757 
1758 	/*
1759 	 * Ignore sector if:
1760 	 * For type     3: ref & app tag is all 'f's
1761 	 * For type 0,1,2: app tag is all 'f's
1762 	 */
1763 	if ((a_app_tag == 0xffff) &&
1764 	    ((scsi_get_prot_type(cmd) != SCSI_PROT_DIF_TYPE3) ||
1765 	     (a_ref_tag == 0xffffffff))) {
1766 		uint32_t blocks_done, resid;
1767 		sector_t lba_s = scsi_get_lba(cmd);
1768 
1769 		/* 2TB boundary case covered automatically with this */
1770 		blocks_done = e_ref_tag - (uint32_t)lba_s + 1;
1771 
1772 		resid = scsi_bufflen(cmd) - (blocks_done *
1773 		    cmd->device->sector_size);
1774 
1775 		scsi_set_resid(cmd, resid);
1776 		cmd->result = DID_OK << 16;
1777 
1778 		/* Update protection tag */
1779 		if (scsi_prot_sg_count(cmd)) {
1780 			uint32_t i, j = 0, k = 0, num_ent;
1781 			struct scatterlist *sg;
1782 			struct sd_dif_tuple *spt;
1783 
1784 			/* Patch the corresponding protection tags */
1785 			scsi_for_each_prot_sg(cmd, sg,
1786 			    scsi_prot_sg_count(cmd), i) {
1787 				num_ent = sg_dma_len(sg) / 8;
1788 				if (k + num_ent < blocks_done) {
1789 					k += num_ent;
1790 					continue;
1791 				}
1792 				j = blocks_done - k - 1;
1793 				k = blocks_done;
1794 				break;
1795 			}
1796 
1797 			if (k != blocks_done) {
1798 				ql_log(ql_log_warn, vha, 0x302f,
1799 				    "unexpected tag values tag:lba=%x:%llx)\n",
1800 				    e_ref_tag, (unsigned long long)lba_s);
1801 				return 1;
1802 			}
1803 
1804 			spt = page_address(sg_page(sg)) + sg->offset;
1805 			spt += j;
1806 
1807 			spt->app_tag = 0xffff;
1808 			if (scsi_get_prot_type(cmd) == SCSI_PROT_DIF_TYPE3)
1809 				spt->ref_tag = 0xffffffff;
1810 		}
1811 
1812 		return 0;
1813 	}
1814 
1815 	/* check guard */
1816 	if (e_guard != a_guard) {
1817 		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
1818 		    0x10, 0x1);
1819 		set_driver_byte(cmd, DRIVER_SENSE);
1820 		set_host_byte(cmd, DID_ABORT);
1821 		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
1822 		return 1;
1823 	}
1824 
1825 	/* check ref tag */
1826 	if (e_ref_tag != a_ref_tag) {
1827 		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
1828 		    0x10, 0x3);
1829 		set_driver_byte(cmd, DRIVER_SENSE);
1830 		set_host_byte(cmd, DID_ABORT);
1831 		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
1832 		return 1;
1833 	}
1834 
1835 	/* check appl tag */
1836 	if (e_app_tag != a_app_tag) {
1837 		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
1838 		    0x10, 0x2);
1839 		set_driver_byte(cmd, DRIVER_SENSE);
1840 		set_host_byte(cmd, DID_ABORT);
1841 		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
1842 		return 1;
1843 	}
1844 
1845 	return 1;
1846 }
1847 
1848 static void
1849 qla25xx_process_bidir_status_iocb(scsi_qla_host_t *vha, void *pkt,
1850 				  struct req_que *req, uint32_t index)
1851 {
1852 	struct qla_hw_data *ha = vha->hw;
1853 	srb_t *sp;
1854 	uint16_t	comp_status;
1855 	uint16_t	scsi_status;
1856 	uint16_t thread_id;
1857 	uint32_t rval = EXT_STATUS_OK;
1858 	struct fc_bsg_job *bsg_job = NULL;
1859 	sts_entry_t *sts;
1860 	struct sts_entry_24xx *sts24;
1861 	sts = (sts_entry_t *) pkt;
1862 	sts24 = (struct sts_entry_24xx *) pkt;
1863 
1864 	/* Validate handle. */
1865 	if (index >= req->num_outstanding_cmds) {
1866 		ql_log(ql_log_warn, vha, 0x70af,
1867 		    "Invalid SCSI completion handle 0x%x.\n", index);
1868 		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
1869 		return;
1870 	}
1871 
1872 	sp = req->outstanding_cmds[index];
1873 	if (sp) {
1874 		/* Free outstanding command slot. */
1875 		req->outstanding_cmds[index] = NULL;
1876 		bsg_job = sp->u.bsg_job;
1877 	} else {
1878 		ql_log(ql_log_warn, vha, 0x70b0,
1879 		    "Req:%d: Invalid ISP SCSI completion handle(0x%x)\n",
1880 		    req->id, index);
1881 
1882 		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
1883 		return;
1884 	}
1885 
1886 	if (IS_FWI2_CAPABLE(ha)) {
1887 		comp_status = le16_to_cpu(sts24->comp_status);
1888 		scsi_status = le16_to_cpu(sts24->scsi_status) & SS_MASK;
1889 	} else {
1890 		comp_status = le16_to_cpu(sts->comp_status);
1891 		scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK;
1892 	}
1893 
1894 	thread_id = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
1895 	switch (comp_status) {
1896 	case CS_COMPLETE:
1897 		if (scsi_status == 0) {
1898 			bsg_job->reply->reply_payload_rcv_len =
1899 					bsg_job->reply_payload.payload_len;
1900 			vha->qla_stats.input_bytes +=
1901 				bsg_job->reply->reply_payload_rcv_len;
1902 			vha->qla_stats.input_requests++;
1903 			rval = EXT_STATUS_OK;
1904 		}
1905 		goto done;
1906 
1907 	case CS_DATA_OVERRUN:
1908 		ql_dbg(ql_dbg_user, vha, 0x70b1,
1909 		    "Command completed with date overrun thread_id=%d\n",
1910 		    thread_id);
1911 		rval = EXT_STATUS_DATA_OVERRUN;
1912 		break;
1913 
1914 	case CS_DATA_UNDERRUN:
1915 		ql_dbg(ql_dbg_user, vha, 0x70b2,
1916 		    "Command completed with date underrun thread_id=%d\n",
1917 		    thread_id);
1918 		rval = EXT_STATUS_DATA_UNDERRUN;
1919 		break;
1920 	case CS_BIDIR_RD_OVERRUN:
1921 		ql_dbg(ql_dbg_user, vha, 0x70b3,
1922 		    "Command completed with read data overrun thread_id=%d\n",
1923 		    thread_id);
1924 		rval = EXT_STATUS_DATA_OVERRUN;
1925 		break;
1926 
1927 	case CS_BIDIR_RD_WR_OVERRUN:
1928 		ql_dbg(ql_dbg_user, vha, 0x70b4,
1929 		    "Command completed with read and write data overrun "
1930 		    "thread_id=%d\n", thread_id);
1931 		rval = EXT_STATUS_DATA_OVERRUN;
1932 		break;
1933 
1934 	case CS_BIDIR_RD_OVERRUN_WR_UNDERRUN:
1935 		ql_dbg(ql_dbg_user, vha, 0x70b5,
1936 		    "Command completed with read data over and write data "
1937 		    "underrun thread_id=%d\n", thread_id);
1938 		rval = EXT_STATUS_DATA_OVERRUN;
1939 		break;
1940 
1941 	case CS_BIDIR_RD_UNDERRUN:
1942 		ql_dbg(ql_dbg_user, vha, 0x70b6,
1943 		    "Command completed with read data data underrun "
1944 		    "thread_id=%d\n", thread_id);
1945 		rval = EXT_STATUS_DATA_UNDERRUN;
1946 		break;
1947 
1948 	case CS_BIDIR_RD_UNDERRUN_WR_OVERRUN:
1949 		ql_dbg(ql_dbg_user, vha, 0x70b7,
1950 		    "Command completed with read data under and write data "
1951 		    "overrun thread_id=%d\n", thread_id);
1952 		rval = EXT_STATUS_DATA_UNDERRUN;
1953 		break;
1954 
1955 	case CS_BIDIR_RD_WR_UNDERRUN:
1956 		ql_dbg(ql_dbg_user, vha, 0x70b8,
1957 		    "Command completed with read and write data underrun "
1958 		    "thread_id=%d\n", thread_id);
1959 		rval = EXT_STATUS_DATA_UNDERRUN;
1960 		break;
1961 
1962 	case CS_BIDIR_DMA:
1963 		ql_dbg(ql_dbg_user, vha, 0x70b9,
1964 		    "Command completed with data DMA error thread_id=%d\n",
1965 		    thread_id);
1966 		rval = EXT_STATUS_DMA_ERR;
1967 		break;
1968 
1969 	case CS_TIMEOUT:
1970 		ql_dbg(ql_dbg_user, vha, 0x70ba,
1971 		    "Command completed with timeout thread_id=%d\n",
1972 		    thread_id);
1973 		rval = EXT_STATUS_TIMEOUT;
1974 		break;
1975 	default:
1976 		ql_dbg(ql_dbg_user, vha, 0x70bb,
1977 		    "Command completed with completion status=0x%x "
1978 		    "thread_id=%d\n", comp_status, thread_id);
1979 		rval = EXT_STATUS_ERR;
1980 		break;
1981 	}
1982 		bsg_job->reply->reply_payload_rcv_len = 0;
1983 
1984 done:
1985 	/* Return the vendor specific reply to API */
1986 	bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] = rval;
1987 	bsg_job->reply_len = sizeof(struct fc_bsg_reply);
1988 	/* Always return DID_OK, bsg will send the vendor specific response
1989 	 * in this case only */
1990 	sp->done(vha, sp, (DID_OK << 6));
1991 
1992 }
1993 
1994 /**
1995  * qla2x00_status_entry() - Process a Status IOCB entry.
1996  * @ha: SCSI driver HA context
1997  * @pkt: Entry pointer
1998  */
1999 static void
2000 qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
2001 {
2002 	srb_t		*sp;
2003 	fc_port_t	*fcport;
2004 	struct scsi_cmnd *cp;
2005 	sts_entry_t *sts;
2006 	struct sts_entry_24xx *sts24;
2007 	uint16_t	comp_status;
2008 	uint16_t	scsi_status;
2009 	uint16_t	ox_id;
2010 	uint8_t		lscsi_status;
2011 	int32_t		resid;
2012 	uint32_t sense_len, par_sense_len, rsp_info_len, resid_len,
2013 	    fw_resid_len;
2014 	uint8_t		*rsp_info, *sense_data;
2015 	struct qla_hw_data *ha = vha->hw;
2016 	uint32_t handle;
2017 	uint16_t que;
2018 	struct req_que *req;
2019 	int logit = 1;
2020 	int res = 0;
2021 	uint16_t state_flags = 0;
2022 	uint16_t retry_delay = 0;
2023 
2024 	sts = (sts_entry_t *) pkt;
2025 	sts24 = (struct sts_entry_24xx *) pkt;
2026 	if (IS_FWI2_CAPABLE(ha)) {
2027 		comp_status = le16_to_cpu(sts24->comp_status);
2028 		scsi_status = le16_to_cpu(sts24->scsi_status) & SS_MASK;
2029 		state_flags = le16_to_cpu(sts24->state_flags);
2030 	} else {
2031 		comp_status = le16_to_cpu(sts->comp_status);
2032 		scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK;
2033 	}
2034 	handle = (uint32_t) LSW(sts->handle);
2035 	que = MSW(sts->handle);
2036 	req = ha->req_q_map[que];
2037 
2038 	/* Check for invalid queue pointer */
2039 	if (req == NULL ||
2040 	    que >= find_first_zero_bit(ha->req_qid_map, ha->max_req_queues)) {
2041 		ql_dbg(ql_dbg_io, vha, 0x3059,
2042 		    "Invalid status handle (0x%x): Bad req pointer. req=%p, "
2043 		    "que=%u.\n", sts->handle, req, que);
2044 		return;
2045 	}
2046 
2047 	/* Validate handle. */
2048 	if (handle < req->num_outstanding_cmds)
2049 		sp = req->outstanding_cmds[handle];
2050 	else
2051 		sp = NULL;
2052 
2053 	if (sp == NULL) {
2054 		ql_dbg(ql_dbg_io, vha, 0x3017,
2055 		    "Invalid status handle (0x%x).\n", sts->handle);
2056 
2057 		if (!test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) {
2058 			if (IS_P3P_TYPE(ha))
2059 				set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
2060 			else
2061 				set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
2062 			qla2xxx_wake_dpc(vha);
2063 		}
2064 		return;
2065 	}
2066 
2067 	if (unlikely((state_flags & BIT_1) && (sp->type == SRB_BIDI_CMD))) {
2068 		qla25xx_process_bidir_status_iocb(vha, pkt, req, handle);
2069 		return;
2070 	}
2071 
2072 	/* Task Management completion. */
2073 	if (sp->type == SRB_TM_CMD) {
2074 		qla24xx_tm_iocb_entry(vha, req, pkt);
2075 		return;
2076 	}
2077 
2078 	/* Fast path completion. */
2079 	if (comp_status == CS_COMPLETE && scsi_status == 0) {
2080 		qla2x00_process_completed_request(vha, req, handle);
2081 
2082 		return;
2083 	}
2084 
2085 	req->outstanding_cmds[handle] = NULL;
2086 	cp = GET_CMD_SP(sp);
2087 	if (cp == NULL) {
2088 		ql_dbg(ql_dbg_io, vha, 0x3018,
2089 		    "Command already returned (0x%x/%p).\n",
2090 		    sts->handle, sp);
2091 
2092 		return;
2093 	}
2094 
2095 	lscsi_status = scsi_status & STATUS_MASK;
2096 
2097 	fcport = sp->fcport;
2098 
2099 	ox_id = 0;
2100 	sense_len = par_sense_len = rsp_info_len = resid_len =
2101 	    fw_resid_len = 0;
2102 	if (IS_FWI2_CAPABLE(ha)) {
2103 		if (scsi_status & SS_SENSE_LEN_VALID)
2104 			sense_len = le32_to_cpu(sts24->sense_len);
2105 		if (scsi_status & SS_RESPONSE_INFO_LEN_VALID)
2106 			rsp_info_len = le32_to_cpu(sts24->rsp_data_len);
2107 		if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER))
2108 			resid_len = le32_to_cpu(sts24->rsp_residual_count);
2109 		if (comp_status == CS_DATA_UNDERRUN)
2110 			fw_resid_len = le32_to_cpu(sts24->residual_len);
2111 		rsp_info = sts24->data;
2112 		sense_data = sts24->data;
2113 		host_to_fcp_swap(sts24->data, sizeof(sts24->data));
2114 		ox_id = le16_to_cpu(sts24->ox_id);
2115 		par_sense_len = sizeof(sts24->data);
2116 		/* Valid values of the retry delay timer are 0x1-0xffef */
2117 		if (sts24->retry_delay > 0 && sts24->retry_delay < 0xfff1)
2118 			retry_delay = sts24->retry_delay;
2119 	} else {
2120 		if (scsi_status & SS_SENSE_LEN_VALID)
2121 			sense_len = le16_to_cpu(sts->req_sense_length);
2122 		if (scsi_status & SS_RESPONSE_INFO_LEN_VALID)
2123 			rsp_info_len = le16_to_cpu(sts->rsp_info_len);
2124 		resid_len = le32_to_cpu(sts->residual_length);
2125 		rsp_info = sts->rsp_info;
2126 		sense_data = sts->req_sense_data;
2127 		par_sense_len = sizeof(sts->req_sense_data);
2128 	}
2129 
2130 	/* Check for any FCP transport errors. */
2131 	if (scsi_status & SS_RESPONSE_INFO_LEN_VALID) {
2132 		/* Sense data lies beyond any FCP RESPONSE data. */
2133 		if (IS_FWI2_CAPABLE(ha)) {
2134 			sense_data += rsp_info_len;
2135 			par_sense_len -= rsp_info_len;
2136 		}
2137 		if (rsp_info_len > 3 && rsp_info[3]) {
2138 			ql_dbg(ql_dbg_io, fcport->vha, 0x3019,
2139 			    "FCP I/O protocol failure (0x%x/0x%x).\n",
2140 			    rsp_info_len, rsp_info[3]);
2141 
2142 			res = DID_BUS_BUSY << 16;
2143 			goto out;
2144 		}
2145 	}
2146 
2147 	/* Check for overrun. */
2148 	if (IS_FWI2_CAPABLE(ha) && comp_status == CS_COMPLETE &&
2149 	    scsi_status & SS_RESIDUAL_OVER)
2150 		comp_status = CS_DATA_OVERRUN;
2151 
2152 	/*
2153 	 * Check retry_delay_timer value if we receive a busy or
2154 	 * queue full.
2155 	 */
2156 	if (lscsi_status == SAM_STAT_TASK_SET_FULL ||
2157 	    lscsi_status == SAM_STAT_BUSY)
2158 		qla2x00_set_retry_delay_timestamp(fcport, retry_delay);
2159 
2160 	/*
2161 	 * Based on Host and scsi status generate status code for Linux
2162 	 */
2163 	switch (comp_status) {
2164 	case CS_COMPLETE:
2165 	case CS_QUEUE_FULL:
2166 		if (scsi_status == 0) {
2167 			res = DID_OK << 16;
2168 			break;
2169 		}
2170 		if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER)) {
2171 			resid = resid_len;
2172 			scsi_set_resid(cp, resid);
2173 
2174 			if (!lscsi_status &&
2175 			    ((unsigned)(scsi_bufflen(cp) - resid) <
2176 			     cp->underflow)) {
2177 				ql_dbg(ql_dbg_io, fcport->vha, 0x301a,
2178 				    "Mid-layer underflow "
2179 				    "detected (0x%x of 0x%x bytes).\n",
2180 				    resid, scsi_bufflen(cp));
2181 
2182 				res = DID_ERROR << 16;
2183 				break;
2184 			}
2185 		}
2186 		res = DID_OK << 16 | lscsi_status;
2187 
2188 		if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
2189 			ql_dbg(ql_dbg_io, fcport->vha, 0x301b,
2190 			    "QUEUE FULL detected.\n");
2191 			break;
2192 		}
2193 		logit = 0;
2194 		if (lscsi_status != SS_CHECK_CONDITION)
2195 			break;
2196 
2197 		memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
2198 		if (!(scsi_status & SS_SENSE_LEN_VALID))
2199 			break;
2200 
2201 		qla2x00_handle_sense(sp, sense_data, par_sense_len, sense_len,
2202 		    rsp, res);
2203 		break;
2204 
2205 	case CS_DATA_UNDERRUN:
2206 		/* Use F/W calculated residual length. */
2207 		resid = IS_FWI2_CAPABLE(ha) ? fw_resid_len : resid_len;
2208 		scsi_set_resid(cp, resid);
2209 		if (scsi_status & SS_RESIDUAL_UNDER) {
2210 			if (IS_FWI2_CAPABLE(ha) && fw_resid_len != resid_len) {
2211 				ql_dbg(ql_dbg_io, fcport->vha, 0x301d,
2212 				    "Dropped frame(s) detected "
2213 				    "(0x%x of 0x%x bytes).\n",
2214 				    resid, scsi_bufflen(cp));
2215 
2216 				res = DID_ERROR << 16 | lscsi_status;
2217 				goto check_scsi_status;
2218 			}
2219 
2220 			if (!lscsi_status &&
2221 			    ((unsigned)(scsi_bufflen(cp) - resid) <
2222 			    cp->underflow)) {
2223 				ql_dbg(ql_dbg_io, fcport->vha, 0x301e,
2224 				    "Mid-layer underflow "
2225 				    "detected (0x%x of 0x%x bytes).\n",
2226 				    resid, scsi_bufflen(cp));
2227 
2228 				res = DID_ERROR << 16;
2229 				break;
2230 			}
2231 		} else if (lscsi_status != SAM_STAT_TASK_SET_FULL &&
2232 			    lscsi_status != SAM_STAT_BUSY) {
2233 			/*
2234 			 * scsi status of task set and busy are considered to be
2235 			 * task not completed.
2236 			 */
2237 
2238 			ql_dbg(ql_dbg_io, fcport->vha, 0x301f,
2239 			    "Dropped frame(s) detected (0x%x "
2240 			    "of 0x%x bytes).\n", resid,
2241 			    scsi_bufflen(cp));
2242 
2243 			res = DID_ERROR << 16 | lscsi_status;
2244 			goto check_scsi_status;
2245 		} else {
2246 			ql_dbg(ql_dbg_io, fcport->vha, 0x3030,
2247 			    "scsi_status: 0x%x, lscsi_status: 0x%x\n",
2248 			    scsi_status, lscsi_status);
2249 		}
2250 
2251 		res = DID_OK << 16 | lscsi_status;
2252 		logit = 0;
2253 
2254 check_scsi_status:
2255 		/*
2256 		 * Check to see if SCSI Status is non zero. If so report SCSI
2257 		 * Status.
2258 		 */
2259 		if (lscsi_status != 0) {
2260 			if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
2261 				ql_dbg(ql_dbg_io, fcport->vha, 0x3020,
2262 				    "QUEUE FULL detected.\n");
2263 				logit = 1;
2264 				break;
2265 			}
2266 			if (lscsi_status != SS_CHECK_CONDITION)
2267 				break;
2268 
2269 			memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
2270 			if (!(scsi_status & SS_SENSE_LEN_VALID))
2271 				break;
2272 
2273 			qla2x00_handle_sense(sp, sense_data, par_sense_len,
2274 			    sense_len, rsp, res);
2275 		}
2276 		break;
2277 
2278 	case CS_PORT_LOGGED_OUT:
2279 	case CS_PORT_CONFIG_CHG:
2280 	case CS_PORT_BUSY:
2281 	case CS_INCOMPLETE:
2282 	case CS_PORT_UNAVAILABLE:
2283 	case CS_TIMEOUT:
2284 	case CS_RESET:
2285 
2286 		/*
2287 		 * We are going to have the fc class block the rport
2288 		 * while we try to recover so instruct the mid layer
2289 		 * to requeue until the class decides how to handle this.
2290 		 */
2291 		res = DID_TRANSPORT_DISRUPTED << 16;
2292 
2293 		if (comp_status == CS_TIMEOUT) {
2294 			if (IS_FWI2_CAPABLE(ha))
2295 				break;
2296 			else if ((le16_to_cpu(sts->status_flags) &
2297 			    SF_LOGOUT_SENT) == 0)
2298 				break;
2299 		}
2300 
2301 		ql_dbg(ql_dbg_io, fcport->vha, 0x3021,
2302 		    "Port to be marked lost on fcport=%02x%02x%02x, current "
2303 		    "port state= %s.\n", fcport->d_id.b.domain,
2304 		    fcport->d_id.b.area, fcport->d_id.b.al_pa,
2305 		    port_state_str[atomic_read(&fcport->state)]);
2306 
2307 		if (atomic_read(&fcport->state) == FCS_ONLINE)
2308 			qla2x00_mark_device_lost(fcport->vha, fcport, 1, 1);
2309 		break;
2310 
2311 	case CS_ABORTED:
2312 		res = DID_RESET << 16;
2313 		break;
2314 
2315 	case CS_DIF_ERROR:
2316 		logit = qla2x00_handle_dif_error(sp, sts24);
2317 		res = cp->result;
2318 		break;
2319 
2320 	case CS_TRANSPORT:
2321 		res = DID_ERROR << 16;
2322 
2323 		if (!IS_PI_SPLIT_DET_CAPABLE(ha))
2324 			break;
2325 
2326 		if (state_flags & BIT_4)
2327 			scmd_printk(KERN_WARNING, cp,
2328 			    "Unsupported device '%s' found.\n",
2329 			    cp->device->vendor);
2330 		break;
2331 
2332 	default:
2333 		res = DID_ERROR << 16;
2334 		break;
2335 	}
2336 
2337 out:
2338 	if (logit)
2339 		ql_dbg(ql_dbg_io, fcport->vha, 0x3022,
2340 		    "FCP command status: 0x%x-0x%x (0x%x) nexus=%ld:%d:%llu "
2341 		    "portid=%02x%02x%02x oxid=0x%x cdb=%10phN len=0x%x "
2342 		    "rsp_info=0x%x resid=0x%x fw_resid=0x%x.\n",
2343 		    comp_status, scsi_status, res, vha->host_no,
2344 		    cp->device->id, cp->device->lun, fcport->d_id.b.domain,
2345 		    fcport->d_id.b.area, fcport->d_id.b.al_pa, ox_id,
2346 		    cp->cmnd, scsi_bufflen(cp), rsp_info_len,
2347 		    resid_len, fw_resid_len);
2348 
2349 	if (rsp->status_srb == NULL)
2350 		sp->done(ha, sp, res);
2351 }
2352 
2353 /**
2354  * qla2x00_status_cont_entry() - Process a Status Continuations entry.
2355  * @ha: SCSI driver HA context
2356  * @pkt: Entry pointer
2357  *
2358  * Extended sense data.
2359  */
2360 static void
2361 qla2x00_status_cont_entry(struct rsp_que *rsp, sts_cont_entry_t *pkt)
2362 {
2363 	uint8_t	sense_sz = 0;
2364 	struct qla_hw_data *ha = rsp->hw;
2365 	struct scsi_qla_host *vha = pci_get_drvdata(ha->pdev);
2366 	srb_t *sp = rsp->status_srb;
2367 	struct scsi_cmnd *cp;
2368 	uint32_t sense_len;
2369 	uint8_t *sense_ptr;
2370 
2371 	if (!sp || !GET_CMD_SENSE_LEN(sp))
2372 		return;
2373 
2374 	sense_len = GET_CMD_SENSE_LEN(sp);
2375 	sense_ptr = GET_CMD_SENSE_PTR(sp);
2376 
2377 	cp = GET_CMD_SP(sp);
2378 	if (cp == NULL) {
2379 		ql_log(ql_log_warn, vha, 0x3025,
2380 		    "cmd is NULL: already returned to OS (sp=%p).\n", sp);
2381 
2382 		rsp->status_srb = NULL;
2383 		return;
2384 	}
2385 
2386 	if (sense_len > sizeof(pkt->data))
2387 		sense_sz = sizeof(pkt->data);
2388 	else
2389 		sense_sz = sense_len;
2390 
2391 	/* Move sense data. */
2392 	if (IS_FWI2_CAPABLE(ha))
2393 		host_to_fcp_swap(pkt->data, sizeof(pkt->data));
2394 	memcpy(sense_ptr, pkt->data, sense_sz);
2395 	ql_dump_buffer(ql_dbg_io + ql_dbg_buffer, vha, 0x302c,
2396 		sense_ptr, sense_sz);
2397 
2398 	sense_len -= sense_sz;
2399 	sense_ptr += sense_sz;
2400 
2401 	SET_CMD_SENSE_PTR(sp, sense_ptr);
2402 	SET_CMD_SENSE_LEN(sp, sense_len);
2403 
2404 	/* Place command on done queue. */
2405 	if (sense_len == 0) {
2406 		rsp->status_srb = NULL;
2407 		sp->done(ha, sp, cp->result);
2408 	}
2409 }
2410 
2411 /**
2412  * qla2x00_error_entry() - Process an error entry.
2413  * @ha: SCSI driver HA context
2414  * @pkt: Entry pointer
2415  */
2416 static void
2417 qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
2418 {
2419 	srb_t *sp;
2420 	struct qla_hw_data *ha = vha->hw;
2421 	const char func[] = "ERROR-IOCB";
2422 	uint16_t que = MSW(pkt->handle);
2423 	struct req_que *req = NULL;
2424 	int res = DID_ERROR << 16;
2425 
2426 	ql_dbg(ql_dbg_async, vha, 0x502a,
2427 	    "type of error status in response: 0x%x\n", pkt->entry_status);
2428 
2429 	if (que >= ha->max_req_queues || !ha->req_q_map[que])
2430 		goto fatal;
2431 
2432 	req = ha->req_q_map[que];
2433 
2434 	if (pkt->entry_status & RF_BUSY)
2435 		res = DID_BUS_BUSY << 16;
2436 
2437 	sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
2438 	if (sp) {
2439 		sp->done(ha, sp, res);
2440 		return;
2441 	}
2442 fatal:
2443 	ql_log(ql_log_warn, vha, 0x5030,
2444 	    "Error entry - invalid handle/queue.\n");
2445 
2446 	if (IS_P3P_TYPE(ha))
2447 		set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
2448 	else
2449 		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
2450 	qla2xxx_wake_dpc(vha);
2451 }
2452 
2453 /**
2454  * qla24xx_mbx_completion() - Process mailbox command completions.
2455  * @ha: SCSI driver HA context
2456  * @mb0: Mailbox0 register
2457  */
2458 static void
2459 qla24xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
2460 {
2461 	uint16_t	cnt;
2462 	uint32_t	mboxes;
2463 	uint16_t __iomem *wptr;
2464 	struct qla_hw_data *ha = vha->hw;
2465 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
2466 
2467 	/* Read all mbox registers? */
2468 	mboxes = (1 << ha->mbx_count) - 1;
2469 	if (!ha->mcp)
2470 		ql_dbg(ql_dbg_async, vha, 0x504e, "MBX pointer ERROR.\n");
2471 	else
2472 		mboxes = ha->mcp->in_mb;
2473 
2474 	/* Load return mailbox registers. */
2475 	ha->flags.mbox_int = 1;
2476 	ha->mailbox_out[0] = mb0;
2477 	mboxes >>= 1;
2478 	wptr = (uint16_t __iomem *)&reg->mailbox1;
2479 
2480 	for (cnt = 1; cnt < ha->mbx_count; cnt++) {
2481 		if (mboxes & BIT_0)
2482 			ha->mailbox_out[cnt] = RD_REG_WORD(wptr);
2483 
2484 		mboxes >>= 1;
2485 		wptr++;
2486 	}
2487 }
2488 
2489 static void
2490 qla24xx_abort_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
2491 	struct abort_entry_24xx *pkt)
2492 {
2493 	const char func[] = "ABT_IOCB";
2494 	srb_t *sp;
2495 	struct srb_iocb *abt;
2496 
2497 	sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
2498 	if (!sp)
2499 		return;
2500 
2501 	abt = &sp->u.iocb_cmd;
2502 	abt->u.abt.comp_status = le32_to_cpu(pkt->nport_handle);
2503 	sp->done(vha, sp, 0);
2504 }
2505 
2506 /**
2507  * qla24xx_process_response_queue() - Process response queue entries.
2508  * @ha: SCSI driver HA context
2509  */
2510 void qla24xx_process_response_queue(struct scsi_qla_host *vha,
2511 	struct rsp_que *rsp)
2512 {
2513 	struct sts_entry_24xx *pkt;
2514 	struct qla_hw_data *ha = vha->hw;
2515 
2516 	if (!vha->flags.online)
2517 		return;
2518 
2519 	while (rsp->ring_ptr->signature != RESPONSE_PROCESSED) {
2520 		pkt = (struct sts_entry_24xx *)rsp->ring_ptr;
2521 
2522 		rsp->ring_index++;
2523 		if (rsp->ring_index == rsp->length) {
2524 			rsp->ring_index = 0;
2525 			rsp->ring_ptr = rsp->ring;
2526 		} else {
2527 			rsp->ring_ptr++;
2528 		}
2529 
2530 		if (pkt->entry_status != 0) {
2531 			qla2x00_error_entry(vha, rsp, (sts_entry_t *) pkt);
2532 
2533 			if (qlt_24xx_process_response_error(vha, pkt))
2534 				goto process_err;
2535 
2536 			((response_t *)pkt)->signature = RESPONSE_PROCESSED;
2537 			wmb();
2538 			continue;
2539 		}
2540 process_err:
2541 
2542 		switch (pkt->entry_type) {
2543 		case STATUS_TYPE:
2544 			qla2x00_status_entry(vha, rsp, pkt);
2545 			break;
2546 		case STATUS_CONT_TYPE:
2547 			qla2x00_status_cont_entry(rsp, (sts_cont_entry_t *)pkt);
2548 			break;
2549 		case VP_RPT_ID_IOCB_TYPE:
2550 			qla24xx_report_id_acquisition(vha,
2551 			    (struct vp_rpt_id_entry_24xx *)pkt);
2552 			break;
2553 		case LOGINOUT_PORT_IOCB_TYPE:
2554 			qla24xx_logio_entry(vha, rsp->req,
2555 			    (struct logio_entry_24xx *)pkt);
2556 			break;
2557 		case CT_IOCB_TYPE:
2558 			qla24xx_els_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE);
2559 			break;
2560 		case ELS_IOCB_TYPE:
2561 			qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE);
2562 			break;
2563 		case ABTS_RECV_24XX:
2564 			/* ensure that the ATIO queue is empty */
2565 			qlt_24xx_process_atio_queue(vha);
2566 		case ABTS_RESP_24XX:
2567 		case CTIO_TYPE7:
2568 		case NOTIFY_ACK_TYPE:
2569 		case CTIO_CRC2:
2570 			qlt_response_pkt_all_vps(vha, (response_t *)pkt);
2571 			break;
2572 		case MARKER_TYPE:
2573 			/* Do nothing in this case, this check is to prevent it
2574 			 * from falling into default case
2575 			 */
2576 			break;
2577 		case ABORT_IOCB_TYPE:
2578 			qla24xx_abort_iocb_entry(vha, rsp->req,
2579 			    (struct abort_entry_24xx *)pkt);
2580 			break;
2581 		default:
2582 			/* Type Not Supported. */
2583 			ql_dbg(ql_dbg_async, vha, 0x5042,
2584 			    "Received unknown response pkt type %x "
2585 			    "entry status=%x.\n",
2586 			    pkt->entry_type, pkt->entry_status);
2587 			break;
2588 		}
2589 		((response_t *)pkt)->signature = RESPONSE_PROCESSED;
2590 		wmb();
2591 	}
2592 
2593 	/* Adjust ring index */
2594 	if (IS_P3P_TYPE(ha)) {
2595 		struct device_reg_82xx __iomem *reg = &ha->iobase->isp82;
2596 		WRT_REG_DWORD(&reg->rsp_q_out[0], rsp->ring_index);
2597 	} else
2598 		WRT_REG_DWORD(rsp->rsp_q_out, rsp->ring_index);
2599 }
2600 
2601 static void
2602 qla2xxx_check_risc_status(scsi_qla_host_t *vha)
2603 {
2604 	int rval;
2605 	uint32_t cnt;
2606 	struct qla_hw_data *ha = vha->hw;
2607 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
2608 
2609 	if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
2610 	    !IS_QLA27XX(ha))
2611 		return;
2612 
2613 	rval = QLA_SUCCESS;
2614 	WRT_REG_DWORD(&reg->iobase_addr, 0x7C00);
2615 	RD_REG_DWORD(&reg->iobase_addr);
2616 	WRT_REG_DWORD(&reg->iobase_window, 0x0001);
2617 	for (cnt = 10000; (RD_REG_DWORD(&reg->iobase_window) & BIT_0) == 0 &&
2618 	    rval == QLA_SUCCESS; cnt--) {
2619 		if (cnt) {
2620 			WRT_REG_DWORD(&reg->iobase_window, 0x0001);
2621 			udelay(10);
2622 		} else
2623 			rval = QLA_FUNCTION_TIMEOUT;
2624 	}
2625 	if (rval == QLA_SUCCESS)
2626 		goto next_test;
2627 
2628 	rval = QLA_SUCCESS;
2629 	WRT_REG_DWORD(&reg->iobase_window, 0x0003);
2630 	for (cnt = 100; (RD_REG_DWORD(&reg->iobase_window) & BIT_0) == 0 &&
2631 	    rval == QLA_SUCCESS; cnt--) {
2632 		if (cnt) {
2633 			WRT_REG_DWORD(&reg->iobase_window, 0x0003);
2634 			udelay(10);
2635 		} else
2636 			rval = QLA_FUNCTION_TIMEOUT;
2637 	}
2638 	if (rval != QLA_SUCCESS)
2639 		goto done;
2640 
2641 next_test:
2642 	if (RD_REG_DWORD(&reg->iobase_c8) & BIT_3)
2643 		ql_log(ql_log_info, vha, 0x504c,
2644 		    "Additional code -- 0x55AA.\n");
2645 
2646 done:
2647 	WRT_REG_DWORD(&reg->iobase_window, 0x0000);
2648 	RD_REG_DWORD(&reg->iobase_window);
2649 }
2650 
2651 /**
2652  * qla24xx_intr_handler() - Process interrupts for the ISP23xx and ISP24xx.
2653  * @irq:
2654  * @dev_id: SCSI driver HA context
2655  *
2656  * Called by system whenever the host adapter generates an interrupt.
2657  *
2658  * Returns handled flag.
2659  */
2660 irqreturn_t
2661 qla24xx_intr_handler(int irq, void *dev_id)
2662 {
2663 	scsi_qla_host_t	*vha;
2664 	struct qla_hw_data *ha;
2665 	struct device_reg_24xx __iomem *reg;
2666 	int		status;
2667 	unsigned long	iter;
2668 	uint32_t	stat;
2669 	uint32_t	hccr;
2670 	uint16_t	mb[8];
2671 	struct rsp_que *rsp;
2672 	unsigned long	flags;
2673 
2674 	rsp = (struct rsp_que *) dev_id;
2675 	if (!rsp) {
2676 		ql_log(ql_log_info, NULL, 0x5059,
2677 		    "%s: NULL response queue pointer.\n", __func__);
2678 		return IRQ_NONE;
2679 	}
2680 
2681 	ha = rsp->hw;
2682 	reg = &ha->iobase->isp24;
2683 	status = 0;
2684 
2685 	if (unlikely(pci_channel_offline(ha->pdev)))
2686 		return IRQ_HANDLED;
2687 
2688 	spin_lock_irqsave(&ha->hardware_lock, flags);
2689 	vha = pci_get_drvdata(ha->pdev);
2690 	for (iter = 50; iter--; ) {
2691 		stat = RD_REG_DWORD(&reg->host_status);
2692 		if (qla2x00_check_reg32_for_disconnect(vha, stat))
2693 			break;
2694 		if (stat & HSRX_RISC_PAUSED) {
2695 			if (unlikely(pci_channel_offline(ha->pdev)))
2696 				break;
2697 
2698 			hccr = RD_REG_DWORD(&reg->hccr);
2699 
2700 			ql_log(ql_log_warn, vha, 0x504b,
2701 			    "RISC paused -- HCCR=%x, Dumping firmware.\n",
2702 			    hccr);
2703 
2704 			qla2xxx_check_risc_status(vha);
2705 
2706 			ha->isp_ops->fw_dump(vha, 1);
2707 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
2708 			break;
2709 		} else if ((stat & HSRX_RISC_INT) == 0)
2710 			break;
2711 
2712 		switch (stat & 0xff) {
2713 		case INTR_ROM_MB_SUCCESS:
2714 		case INTR_ROM_MB_FAILED:
2715 		case INTR_MB_SUCCESS:
2716 		case INTR_MB_FAILED:
2717 			qla24xx_mbx_completion(vha, MSW(stat));
2718 			status |= MBX_INTERRUPT;
2719 
2720 			break;
2721 		case INTR_ASYNC_EVENT:
2722 			mb[0] = MSW(stat);
2723 			mb[1] = RD_REG_WORD(&reg->mailbox1);
2724 			mb[2] = RD_REG_WORD(&reg->mailbox2);
2725 			mb[3] = RD_REG_WORD(&reg->mailbox3);
2726 			qla2x00_async_event(vha, rsp, mb);
2727 			break;
2728 		case INTR_RSP_QUE_UPDATE:
2729 		case INTR_RSP_QUE_UPDATE_83XX:
2730 			qla24xx_process_response_queue(vha, rsp);
2731 			break;
2732 		case INTR_ATIO_QUE_UPDATE:
2733 			qlt_24xx_process_atio_queue(vha);
2734 			break;
2735 		case INTR_ATIO_RSP_QUE_UPDATE:
2736 			qlt_24xx_process_atio_queue(vha);
2737 			qla24xx_process_response_queue(vha, rsp);
2738 			break;
2739 		default:
2740 			ql_dbg(ql_dbg_async, vha, 0x504f,
2741 			    "Unrecognized interrupt type (%d).\n", stat * 0xff);
2742 			break;
2743 		}
2744 		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
2745 		RD_REG_DWORD_RELAXED(&reg->hccr);
2746 		if (unlikely(IS_QLA83XX(ha) && (ha->pdev->revision == 1)))
2747 			ndelay(3500);
2748 	}
2749 	qla2x00_handle_mbx_completion(ha, status);
2750 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
2751 
2752 	return IRQ_HANDLED;
2753 }
2754 
2755 static irqreturn_t
2756 qla24xx_msix_rsp_q(int irq, void *dev_id)
2757 {
2758 	struct qla_hw_data *ha;
2759 	struct rsp_que *rsp;
2760 	struct device_reg_24xx __iomem *reg;
2761 	struct scsi_qla_host *vha;
2762 	unsigned long flags;
2763 	uint32_t stat = 0;
2764 
2765 	rsp = (struct rsp_que *) dev_id;
2766 	if (!rsp) {
2767 		ql_log(ql_log_info, NULL, 0x505a,
2768 		    "%s: NULL response queue pointer.\n", __func__);
2769 		return IRQ_NONE;
2770 	}
2771 	ha = rsp->hw;
2772 	reg = &ha->iobase->isp24;
2773 
2774 	spin_lock_irqsave(&ha->hardware_lock, flags);
2775 
2776 	vha = pci_get_drvdata(ha->pdev);
2777 	/*
2778 	 * Use host_status register to check to PCI disconnection before we
2779 	 * we process the response queue.
2780 	 */
2781 	stat = RD_REG_DWORD(&reg->host_status);
2782 	if (qla2x00_check_reg32_for_disconnect(vha, stat))
2783 		goto out;
2784 	qla24xx_process_response_queue(vha, rsp);
2785 	if (!ha->flags.disable_msix_handshake) {
2786 		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
2787 		RD_REG_DWORD_RELAXED(&reg->hccr);
2788 	}
2789 out:
2790 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
2791 
2792 	return IRQ_HANDLED;
2793 }
2794 
2795 static irqreturn_t
2796 qla25xx_msix_rsp_q(int irq, void *dev_id)
2797 {
2798 	struct qla_hw_data *ha;
2799 	scsi_qla_host_t *vha;
2800 	struct rsp_que *rsp;
2801 	struct device_reg_24xx __iomem *reg;
2802 	unsigned long flags;
2803 	uint32_t hccr = 0;
2804 
2805 	rsp = (struct rsp_que *) dev_id;
2806 	if (!rsp) {
2807 		ql_log(ql_log_info, NULL, 0x505b,
2808 		    "%s: NULL response queue pointer.\n", __func__);
2809 		return IRQ_NONE;
2810 	}
2811 	ha = rsp->hw;
2812 	vha = pci_get_drvdata(ha->pdev);
2813 
2814 	/* Clear the interrupt, if enabled, for this response queue */
2815 	if (!ha->flags.disable_msix_handshake) {
2816 		reg = &ha->iobase->isp24;
2817 		spin_lock_irqsave(&ha->hardware_lock, flags);
2818 		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
2819 		hccr = RD_REG_DWORD_RELAXED(&reg->hccr);
2820 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
2821 	}
2822 	if (qla2x00_check_reg32_for_disconnect(vha, hccr))
2823 		goto out;
2824 	queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work);
2825 
2826 out:
2827 	return IRQ_HANDLED;
2828 }
2829 
2830 static irqreturn_t
2831 qla24xx_msix_default(int irq, void *dev_id)
2832 {
2833 	scsi_qla_host_t	*vha;
2834 	struct qla_hw_data *ha;
2835 	struct rsp_que *rsp;
2836 	struct device_reg_24xx __iomem *reg;
2837 	int		status;
2838 	uint32_t	stat;
2839 	uint32_t	hccr;
2840 	uint16_t	mb[8];
2841 	unsigned long flags;
2842 
2843 	rsp = (struct rsp_que *) dev_id;
2844 	if (!rsp) {
2845 		ql_log(ql_log_info, NULL, 0x505c,
2846 		    "%s: NULL response queue pointer.\n", __func__);
2847 		return IRQ_NONE;
2848 	}
2849 	ha = rsp->hw;
2850 	reg = &ha->iobase->isp24;
2851 	status = 0;
2852 
2853 	spin_lock_irqsave(&ha->hardware_lock, flags);
2854 	vha = pci_get_drvdata(ha->pdev);
2855 	do {
2856 		stat = RD_REG_DWORD(&reg->host_status);
2857 		if (qla2x00_check_reg32_for_disconnect(vha, stat))
2858 			break;
2859 		if (stat & HSRX_RISC_PAUSED) {
2860 			if (unlikely(pci_channel_offline(ha->pdev)))
2861 				break;
2862 
2863 			hccr = RD_REG_DWORD(&reg->hccr);
2864 
2865 			ql_log(ql_log_info, vha, 0x5050,
2866 			    "RISC paused -- HCCR=%x, Dumping firmware.\n",
2867 			    hccr);
2868 
2869 			qla2xxx_check_risc_status(vha);
2870 
2871 			ha->isp_ops->fw_dump(vha, 1);
2872 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
2873 			break;
2874 		} else if ((stat & HSRX_RISC_INT) == 0)
2875 			break;
2876 
2877 		switch (stat & 0xff) {
2878 		case INTR_ROM_MB_SUCCESS:
2879 		case INTR_ROM_MB_FAILED:
2880 		case INTR_MB_SUCCESS:
2881 		case INTR_MB_FAILED:
2882 			qla24xx_mbx_completion(vha, MSW(stat));
2883 			status |= MBX_INTERRUPT;
2884 
2885 			break;
2886 		case INTR_ASYNC_EVENT:
2887 			mb[0] = MSW(stat);
2888 			mb[1] = RD_REG_WORD(&reg->mailbox1);
2889 			mb[2] = RD_REG_WORD(&reg->mailbox2);
2890 			mb[3] = RD_REG_WORD(&reg->mailbox3);
2891 			qla2x00_async_event(vha, rsp, mb);
2892 			break;
2893 		case INTR_RSP_QUE_UPDATE:
2894 		case INTR_RSP_QUE_UPDATE_83XX:
2895 			qla24xx_process_response_queue(vha, rsp);
2896 			break;
2897 		case INTR_ATIO_QUE_UPDATE:
2898 			qlt_24xx_process_atio_queue(vha);
2899 			break;
2900 		case INTR_ATIO_RSP_QUE_UPDATE:
2901 			qlt_24xx_process_atio_queue(vha);
2902 			qla24xx_process_response_queue(vha, rsp);
2903 			break;
2904 		default:
2905 			ql_dbg(ql_dbg_async, vha, 0x5051,
2906 			    "Unrecognized interrupt type (%d).\n", stat & 0xff);
2907 			break;
2908 		}
2909 		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
2910 	} while (0);
2911 	qla2x00_handle_mbx_completion(ha, status);
2912 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
2913 
2914 	return IRQ_HANDLED;
2915 }
2916 
2917 /* Interrupt handling helpers. */
2918 
2919 struct qla_init_msix_entry {
2920 	const char *name;
2921 	irq_handler_t handler;
2922 };
2923 
2924 static struct qla_init_msix_entry msix_entries[3] = {
2925 	{ "qla2xxx (default)", qla24xx_msix_default },
2926 	{ "qla2xxx (rsp_q)", qla24xx_msix_rsp_q },
2927 	{ "qla2xxx (multiq)", qla25xx_msix_rsp_q },
2928 };
2929 
2930 static struct qla_init_msix_entry qla82xx_msix_entries[2] = {
2931 	{ "qla2xxx (default)", qla82xx_msix_default },
2932 	{ "qla2xxx (rsp_q)", qla82xx_msix_rsp_q },
2933 };
2934 
2935 static struct qla_init_msix_entry qla83xx_msix_entries[3] = {
2936 	{ "qla2xxx (default)", qla24xx_msix_default },
2937 	{ "qla2xxx (rsp_q)", qla24xx_msix_rsp_q },
2938 	{ "qla2xxx (atio_q)", qla83xx_msix_atio_q },
2939 };
2940 
2941 static void
2942 qla24xx_disable_msix(struct qla_hw_data *ha)
2943 {
2944 	int i;
2945 	struct qla_msix_entry *qentry;
2946 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
2947 
2948 	for (i = 0; i < ha->msix_count; i++) {
2949 		qentry = &ha->msix_entries[i];
2950 		if (qentry->have_irq)
2951 			free_irq(qentry->vector, qentry->rsp);
2952 	}
2953 	pci_disable_msix(ha->pdev);
2954 	kfree(ha->msix_entries);
2955 	ha->msix_entries = NULL;
2956 	ha->flags.msix_enabled = 0;
2957 	ql_dbg(ql_dbg_init, vha, 0x0042,
2958 	    "Disabled the MSI.\n");
2959 }
2960 
2961 static int
2962 qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
2963 {
2964 #define MIN_MSIX_COUNT	2
2965 #define ATIO_VECTOR	2
2966 	int i, ret;
2967 	struct msix_entry *entries;
2968 	struct qla_msix_entry *qentry;
2969 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
2970 
2971 	entries = kzalloc(sizeof(struct msix_entry) * ha->msix_count,
2972 			GFP_KERNEL);
2973 	if (!entries) {
2974 		ql_log(ql_log_warn, vha, 0x00bc,
2975 		    "Failed to allocate memory for msix_entry.\n");
2976 		return -ENOMEM;
2977 	}
2978 
2979 	for (i = 0; i < ha->msix_count; i++)
2980 		entries[i].entry = i;
2981 
2982 	ret = pci_enable_msix_range(ha->pdev,
2983 				    entries, MIN_MSIX_COUNT, ha->msix_count);
2984 	if (ret < 0) {
2985 		ql_log(ql_log_fatal, vha, 0x00c7,
2986 		    "MSI-X: Failed to enable support, "
2987 		    "giving   up -- %d/%d.\n",
2988 		    ha->msix_count, ret);
2989 		goto msix_out;
2990 	} else if (ret < ha->msix_count) {
2991 		ql_log(ql_log_warn, vha, 0x00c6,
2992 		    "MSI-X: Failed to enable support "
2993 		    "-- %d/%d\n Retry with %d vectors.\n",
2994 		    ha->msix_count, ret, ret);
2995 	}
2996 	ha->msix_count = ret;
2997 	ha->max_rsp_queues = ha->msix_count - 1;
2998 	ha->msix_entries = kzalloc(sizeof(struct qla_msix_entry) *
2999 				ha->msix_count, GFP_KERNEL);
3000 	if (!ha->msix_entries) {
3001 		ql_log(ql_log_fatal, vha, 0x00c8,
3002 		    "Failed to allocate memory for ha->msix_entries.\n");
3003 		ret = -ENOMEM;
3004 		goto msix_out;
3005 	}
3006 	ha->flags.msix_enabled = 1;
3007 
3008 	for (i = 0; i < ha->msix_count; i++) {
3009 		qentry = &ha->msix_entries[i];
3010 		qentry->vector = entries[i].vector;
3011 		qentry->entry = entries[i].entry;
3012 		qentry->have_irq = 0;
3013 		qentry->rsp = NULL;
3014 	}
3015 
3016 	/* Enable MSI-X vectors for the base queue */
3017 	for (i = 0; i < 2; i++) {
3018 		qentry = &ha->msix_entries[i];
3019 		if (IS_P3P_TYPE(ha))
3020 			ret = request_irq(qentry->vector,
3021 				qla82xx_msix_entries[i].handler,
3022 				0, qla82xx_msix_entries[i].name, rsp);
3023 		else
3024 			ret = request_irq(qentry->vector,
3025 				msix_entries[i].handler,
3026 				0, msix_entries[i].name, rsp);
3027 		if (ret)
3028 			goto msix_register_fail;
3029 		qentry->have_irq = 1;
3030 		qentry->rsp = rsp;
3031 		rsp->msix = qentry;
3032 	}
3033 
3034 	/*
3035 	 * If target mode is enable, also request the vector for the ATIO
3036 	 * queue.
3037 	 */
3038 	if (QLA_TGT_MODE_ENABLED() && IS_ATIO_MSIX_CAPABLE(ha)) {
3039 		qentry = &ha->msix_entries[ATIO_VECTOR];
3040 		ret = request_irq(qentry->vector,
3041 			qla83xx_msix_entries[ATIO_VECTOR].handler,
3042 			0, qla83xx_msix_entries[ATIO_VECTOR].name, rsp);
3043 		qentry->have_irq = 1;
3044 		qentry->rsp = rsp;
3045 		rsp->msix = qentry;
3046 	}
3047 
3048 msix_register_fail:
3049 	if (ret) {
3050 		ql_log(ql_log_fatal, vha, 0x00cb,
3051 		    "MSI-X: unable to register handler -- %x/%d.\n",
3052 		    qentry->vector, ret);
3053 		qla24xx_disable_msix(ha);
3054 		ha->mqenable = 0;
3055 		goto msix_out;
3056 	}
3057 
3058 	/* Enable MSI-X vector for response queue update for queue 0 */
3059 	if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
3060 		if (ha->msixbase && ha->mqiobase &&
3061 		    (ha->max_rsp_queues > 1 || ha->max_req_queues > 1))
3062 			ha->mqenable = 1;
3063 	} else
3064 		if (ha->mqiobase
3065 		    && (ha->max_rsp_queues > 1 || ha->max_req_queues > 1))
3066 			ha->mqenable = 1;
3067 	ql_dbg(ql_dbg_multiq, vha, 0xc005,
3068 	    "mqiobase=%p, max_rsp_queues=%d, max_req_queues=%d.\n",
3069 	    ha->mqiobase, ha->max_rsp_queues, ha->max_req_queues);
3070 	ql_dbg(ql_dbg_init, vha, 0x0055,
3071 	    "mqiobase=%p, max_rsp_queues=%d, max_req_queues=%d.\n",
3072 	    ha->mqiobase, ha->max_rsp_queues, ha->max_req_queues);
3073 
3074 msix_out:
3075 	kfree(entries);
3076 	return ret;
3077 }
3078 
3079 int
3080 qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp)
3081 {
3082 	int ret = QLA_FUNCTION_FAILED;
3083 	device_reg_t *reg = ha->iobase;
3084 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
3085 
3086 	/* If possible, enable MSI-X. */
3087 	if (!IS_QLA2432(ha) && !IS_QLA2532(ha) && !IS_QLA8432(ha) &&
3088 	    !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha) && !IS_QLAFX00(ha) &&
3089 	    !IS_QLA27XX(ha))
3090 		goto skip_msi;
3091 
3092 	if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
3093 		(ha->pdev->subsystem_device == 0x7040 ||
3094 		ha->pdev->subsystem_device == 0x7041 ||
3095 		ha->pdev->subsystem_device == 0x1705)) {
3096 		ql_log(ql_log_warn, vha, 0x0034,
3097 		    "MSI-X: Unsupported ISP 2432 SSVID/SSDID (0x%X,0x%X).\n",
3098 			ha->pdev->subsystem_vendor,
3099 			ha->pdev->subsystem_device);
3100 		goto skip_msi;
3101 	}
3102 
3103 	if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX)) {
3104 		ql_log(ql_log_warn, vha, 0x0035,
3105 		    "MSI-X; Unsupported ISP2432 (0x%X, 0x%X).\n",
3106 		    ha->pdev->revision, QLA_MSIX_CHIP_REV_24XX);
3107 		goto skip_msix;
3108 	}
3109 
3110 	ret = qla24xx_enable_msix(ha, rsp);
3111 	if (!ret) {
3112 		ql_dbg(ql_dbg_init, vha, 0x0036,
3113 		    "MSI-X: Enabled (0x%X, 0x%X).\n",
3114 		    ha->chip_revision, ha->fw_attributes);
3115 		goto clear_risc_ints;
3116 	}
3117 
3118 skip_msix:
3119 
3120 	ql_log(ql_log_info, vha, 0x0037,
3121 	    "Falling back-to MSI mode -%d.\n", ret);
3122 
3123 	if (!IS_QLA24XX(ha) && !IS_QLA2532(ha) && !IS_QLA8432(ha) &&
3124 	    !IS_QLA8001(ha) && !IS_P3P_TYPE(ha) && !IS_QLAFX00(ha) &&
3125 	    !IS_QLA27XX(ha))
3126 		goto skip_msi;
3127 
3128 	ret = pci_enable_msi(ha->pdev);
3129 	if (!ret) {
3130 		ql_dbg(ql_dbg_init, vha, 0x0038,
3131 		    "MSI: Enabled.\n");
3132 		ha->flags.msi_enabled = 1;
3133 	} else
3134 		ql_log(ql_log_warn, vha, 0x0039,
3135 		    "Falling back-to INTa mode -- %d.\n", ret);
3136 skip_msi:
3137 
3138 	/* Skip INTx on ISP82xx. */
3139 	if (!ha->flags.msi_enabled && IS_QLA82XX(ha))
3140 		return QLA_FUNCTION_FAILED;
3141 
3142 	ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler,
3143 	    ha->flags.msi_enabled ? 0 : IRQF_SHARED,
3144 	    QLA2XXX_DRIVER_NAME, rsp);
3145 	if (ret) {
3146 		ql_log(ql_log_warn, vha, 0x003a,
3147 		    "Failed to reserve interrupt %d already in use.\n",
3148 		    ha->pdev->irq);
3149 		goto fail;
3150 	} else if (!ha->flags.msi_enabled) {
3151 		ql_dbg(ql_dbg_init, vha, 0x0125,
3152 		    "INTa mode: Enabled.\n");
3153 		ha->flags.mr_intr_valid = 1;
3154 	}
3155 
3156 clear_risc_ints:
3157 	if (IS_FWI2_CAPABLE(ha) || IS_QLAFX00(ha))
3158 		goto fail;
3159 
3160 	spin_lock_irq(&ha->hardware_lock);
3161 	WRT_REG_WORD(&reg->isp.semaphore, 0);
3162 	spin_unlock_irq(&ha->hardware_lock);
3163 
3164 fail:
3165 	return ret;
3166 }
3167 
3168 void
3169 qla2x00_free_irqs(scsi_qla_host_t *vha)
3170 {
3171 	struct qla_hw_data *ha = vha->hw;
3172 	struct rsp_que *rsp;
3173 
3174 	/*
3175 	 * We need to check that ha->rsp_q_map is valid in case we are called
3176 	 * from a probe failure context.
3177 	 */
3178 	if (!ha->rsp_q_map || !ha->rsp_q_map[0])
3179 		return;
3180 	rsp = ha->rsp_q_map[0];
3181 
3182 	if (ha->flags.msix_enabled)
3183 		qla24xx_disable_msix(ha);
3184 	else if (ha->flags.msi_enabled) {
3185 		free_irq(ha->pdev->irq, rsp);
3186 		pci_disable_msi(ha->pdev);
3187 	} else
3188 		free_irq(ha->pdev->irq, rsp);
3189 }
3190 
3191 
3192 int qla25xx_request_irq(struct rsp_que *rsp)
3193 {
3194 	struct qla_hw_data *ha = rsp->hw;
3195 	struct qla_init_msix_entry *intr = &msix_entries[2];
3196 	struct qla_msix_entry *msix = rsp->msix;
3197 	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
3198 	int ret;
3199 
3200 	ret = request_irq(msix->vector, intr->handler, 0, intr->name, rsp);
3201 	if (ret) {
3202 		ql_log(ql_log_fatal, vha, 0x00e6,
3203 		    "MSI-X: Unable to register handler -- %x/%d.\n",
3204 		    msix->vector, ret);
3205 		return ret;
3206 	}
3207 	msix->have_irq = 1;
3208 	msix->rsp = rsp;
3209 	return ret;
3210 }
3211