1 /* 2 * QLogic Fibre Channel HBA Driver 3 * Copyright (c) 2003-2014 QLogic Corporation 4 * 5 * See LICENSE.qla2xxx for copyright and licensing details. 6 */ 7 #ifndef __QLA_FW_H 8 #define __QLA_FW_H 9 10 #include <linux/nvme.h> 11 #include <linux/nvme-fc.h> 12 13 #include "qla_dsd.h" 14 15 #define MBS_CHECKSUM_ERROR 0x4010 16 #define MBS_INVALID_PRODUCT_KEY 0x4020 17 18 /* 19 * Firmware Options. 20 */ 21 #define FO1_ENABLE_PUREX BIT_10 22 #define FO1_DISABLE_LED_CTRL BIT_6 23 #define FO1_ENABLE_8016 BIT_0 24 #define FO2_ENABLE_SEL_CLASS2 BIT_5 25 #define FO3_NO_ABTS_ON_LINKDOWN BIT_14 26 #define FO3_HOLD_STS_IOCB BIT_12 27 28 /* 29 * Port Database structure definition for ISP 24xx. 30 */ 31 #define PDO_FORCE_ADISC BIT_1 32 #define PDO_FORCE_PLOGI BIT_0 33 34 35 #define PORT_DATABASE_24XX_SIZE 64 36 struct port_database_24xx { 37 uint16_t flags; 38 #define PDF_TASK_RETRY_ID BIT_14 39 #define PDF_FC_TAPE BIT_7 40 #define PDF_ACK0_CAPABLE BIT_6 41 #define PDF_FCP2_CONF BIT_5 42 #define PDF_CLASS_2 BIT_4 43 #define PDF_HARD_ADDR BIT_1 44 45 /* 46 * for NVMe, the login_state field has been 47 * split into nibbles. 48 * The lower nibble is for FCP. 49 * The upper nibble is for NVMe. 50 */ 51 uint8_t current_login_state; 52 uint8_t last_login_state; 53 #define PDS_PLOGI_PENDING 0x03 54 #define PDS_PLOGI_COMPLETE 0x04 55 #define PDS_PRLI_PENDING 0x05 56 #define PDS_PRLI_COMPLETE 0x06 57 #define PDS_PORT_UNAVAILABLE 0x07 58 #define PDS_PRLO_PENDING 0x09 59 #define PDS_LOGO_PENDING 0x11 60 #define PDS_PRLI2_PENDING 0x12 61 62 uint8_t hard_address[3]; 63 uint8_t reserved_1; 64 65 uint8_t port_id[3]; 66 uint8_t sequence_id; 67 68 uint16_t port_timer; 69 70 uint16_t nport_handle; /* N_PORT handle. */ 71 72 uint16_t receive_data_size; 73 uint16_t reserved_2; 74 75 uint8_t prli_svc_param_word_0[2]; /* Big endian */ 76 /* Bits 15-0 of word 0 */ 77 uint8_t prli_svc_param_word_3[2]; /* Big endian */ 78 /* Bits 15-0 of word 3 */ 79 80 uint8_t port_name[WWN_SIZE]; 81 uint8_t node_name[WWN_SIZE]; 82 83 uint8_t reserved_3[4]; 84 uint16_t prli_nvme_svc_param_word_0; /* Bits 15-0 of word 0 */ 85 uint16_t prli_nvme_svc_param_word_3; /* Bits 15-0 of word 3 */ 86 uint16_t nvme_first_burst_size; 87 uint8_t reserved_4[14]; 88 }; 89 90 /* 91 * MB 75h returns a list of DB entries similar to port_database_24xx(64B). 92 * However, in this case it returns 1st 40 bytes. 93 */ 94 struct get_name_list_extended { 95 __le16 flags; 96 u8 current_login_state; 97 u8 last_login_state; 98 u8 hard_address[3]; 99 u8 reserved_1; 100 u8 port_id[3]; 101 u8 sequence_id; 102 __le16 port_timer; 103 __le16 nport_handle; /* N_PORT handle. */ 104 __le16 receive_data_size; 105 __le16 reserved_2; 106 107 /* PRLI SVC Param are Big endian */ 108 u8 prli_svc_param_word_0[2]; /* Bits 15-0 of word 0 */ 109 u8 prli_svc_param_word_3[2]; /* Bits 15-0 of word 3 */ 110 u8 port_name[WWN_SIZE]; 111 u8 node_name[WWN_SIZE]; 112 }; 113 114 /* MB 75h: This is the short version of the database */ 115 struct get_name_list { 116 u8 port_node_name[WWN_SIZE]; /* B7 most sig, B0 least sig */ 117 __le16 nport_handle; 118 u8 reserved; 119 }; 120 121 struct vp_database_24xx { 122 uint16_t vp_status; 123 uint8_t options; 124 uint8_t id; 125 uint8_t port_name[WWN_SIZE]; 126 uint8_t node_name[WWN_SIZE]; 127 uint16_t port_id_low; 128 uint16_t port_id_high; 129 }; 130 131 struct nvram_24xx { 132 /* NVRAM header. */ 133 uint8_t id[4]; 134 uint16_t nvram_version; 135 uint16_t reserved_0; 136 137 /* Firmware Initialization Control Block. */ 138 uint16_t version; 139 uint16_t reserved_1; 140 __le16 frame_payload_size; 141 uint16_t execution_throttle; 142 uint16_t exchange_count; 143 uint16_t hard_address; 144 145 uint8_t port_name[WWN_SIZE]; 146 uint8_t node_name[WWN_SIZE]; 147 148 uint16_t login_retry_count; 149 uint16_t link_down_on_nos; 150 uint16_t interrupt_delay_timer; 151 uint16_t login_timeout; 152 153 uint32_t firmware_options_1; 154 uint32_t firmware_options_2; 155 uint32_t firmware_options_3; 156 157 /* Offset 56. */ 158 159 /* 160 * BIT 0 = Control Enable 161 * BIT 1-15 = 162 * 163 * BIT 0-7 = Reserved 164 * BIT 8-10 = Output Swing 1G 165 * BIT 11-13 = Output Emphasis 1G 166 * BIT 14-15 = Reserved 167 * 168 * BIT 0-7 = Reserved 169 * BIT 8-10 = Output Swing 2G 170 * BIT 11-13 = Output Emphasis 2G 171 * BIT 14-15 = Reserved 172 * 173 * BIT 0-7 = Reserved 174 * BIT 8-10 = Output Swing 4G 175 * BIT 11-13 = Output Emphasis 4G 176 * BIT 14-15 = Reserved 177 */ 178 uint16_t seriallink_options[4]; 179 180 uint16_t reserved_2[16]; 181 182 /* Offset 96. */ 183 uint16_t reserved_3[16]; 184 185 /* PCIe table entries. */ 186 uint16_t reserved_4[16]; 187 188 /* Offset 160. */ 189 uint16_t reserved_5[16]; 190 191 /* Offset 192. */ 192 uint16_t reserved_6[16]; 193 194 /* Offset 224. */ 195 uint16_t reserved_7[16]; 196 197 /* 198 * BIT 0 = Enable spinup delay 199 * BIT 1 = Disable BIOS 200 * BIT 2 = Enable Memory Map BIOS 201 * BIT 3 = Enable Selectable Boot 202 * BIT 4 = Disable RISC code load 203 * BIT 5 = Disable Serdes 204 * BIT 6 = 205 * BIT 7 = 206 * 207 * BIT 8 = 208 * BIT 9 = 209 * BIT 10 = Enable lip full login 210 * BIT 11 = Enable target reset 211 * BIT 12 = 212 * BIT 13 = 213 * BIT 14 = 214 * BIT 15 = Enable alternate WWN 215 * 216 * BIT 16-31 = 217 */ 218 uint32_t host_p; 219 220 uint8_t alternate_port_name[WWN_SIZE]; 221 uint8_t alternate_node_name[WWN_SIZE]; 222 223 uint8_t boot_port_name[WWN_SIZE]; 224 uint16_t boot_lun_number; 225 uint16_t reserved_8; 226 227 uint8_t alt1_boot_port_name[WWN_SIZE]; 228 uint16_t alt1_boot_lun_number; 229 uint16_t reserved_9; 230 231 uint8_t alt2_boot_port_name[WWN_SIZE]; 232 uint16_t alt2_boot_lun_number; 233 uint16_t reserved_10; 234 235 uint8_t alt3_boot_port_name[WWN_SIZE]; 236 uint16_t alt3_boot_lun_number; 237 uint16_t reserved_11; 238 239 /* 240 * BIT 0 = Selective Login 241 * BIT 1 = Alt-Boot Enable 242 * BIT 2 = Reserved 243 * BIT 3 = Boot Order List 244 * BIT 4 = Reserved 245 * BIT 5 = Selective LUN 246 * BIT 6 = Reserved 247 * BIT 7-31 = 248 */ 249 uint32_t efi_parameters; 250 251 uint8_t reset_delay; 252 uint8_t reserved_12; 253 uint16_t reserved_13; 254 255 uint16_t boot_id_number; 256 uint16_t reserved_14; 257 258 uint16_t max_luns_per_target; 259 uint16_t reserved_15; 260 261 uint16_t port_down_retry_count; 262 uint16_t link_down_timeout; 263 264 /* FCode parameters. */ 265 uint16_t fcode_parameter; 266 267 uint16_t reserved_16[3]; 268 269 /* Offset 352. */ 270 uint8_t prev_drv_ver_major; 271 uint8_t prev_drv_ver_submajob; 272 uint8_t prev_drv_ver_minor; 273 uint8_t prev_drv_ver_subminor; 274 275 uint16_t prev_bios_ver_major; 276 uint16_t prev_bios_ver_minor; 277 278 uint16_t prev_efi_ver_major; 279 uint16_t prev_efi_ver_minor; 280 281 uint16_t prev_fw_ver_major; 282 uint8_t prev_fw_ver_minor; 283 uint8_t prev_fw_ver_subminor; 284 285 uint16_t reserved_17[8]; 286 287 /* Offset 384. */ 288 uint16_t reserved_18[16]; 289 290 /* Offset 416. */ 291 uint16_t reserved_19[16]; 292 293 /* Offset 448. */ 294 uint16_t reserved_20[16]; 295 296 /* Offset 480. */ 297 uint8_t model_name[16]; 298 299 uint16_t reserved_21[2]; 300 301 /* Offset 500. */ 302 /* HW Parameter Block. */ 303 uint16_t pcie_table_sig; 304 uint16_t pcie_table_offset; 305 306 uint16_t subsystem_vendor_id; 307 uint16_t subsystem_device_id; 308 309 uint32_t checksum; 310 }; 311 312 /* 313 * ISP Initialization Control Block. 314 * Little endian except where noted. 315 */ 316 #define ICB_VERSION 1 317 struct init_cb_24xx { 318 uint16_t version; 319 uint16_t reserved_1; 320 321 uint16_t frame_payload_size; 322 uint16_t execution_throttle; 323 uint16_t exchange_count; 324 325 uint16_t hard_address; 326 327 uint8_t port_name[WWN_SIZE]; /* Big endian. */ 328 uint8_t node_name[WWN_SIZE]; /* Big endian. */ 329 330 uint16_t response_q_inpointer; 331 uint16_t request_q_outpointer; 332 333 uint16_t login_retry_count; 334 335 uint16_t prio_request_q_outpointer; 336 337 uint16_t response_q_length; 338 uint16_t request_q_length; 339 340 uint16_t link_down_on_nos; /* Milliseconds. */ 341 342 uint16_t prio_request_q_length; 343 344 __le64 request_q_address __packed; 345 __le64 response_q_address __packed; 346 __le64 prio_request_q_address __packed; 347 348 uint16_t msix; 349 uint16_t msix_atio; 350 uint8_t reserved_2[4]; 351 352 uint16_t atio_q_inpointer; 353 uint16_t atio_q_length; 354 __le64 atio_q_address __packed; 355 356 uint16_t interrupt_delay_timer; /* 100us increments. */ 357 uint16_t login_timeout; 358 359 /* 360 * BIT 0 = Enable Hard Loop Id 361 * BIT 1 = Enable Fairness 362 * BIT 2 = Enable Full-Duplex 363 * BIT 3 = Reserved 364 * BIT 4 = Enable Target Mode 365 * BIT 5 = Disable Initiator Mode 366 * BIT 6 = Acquire FA-WWN 367 * BIT 7 = Enable D-port Diagnostics 368 * 369 * BIT 8 = Reserved 370 * BIT 9 = Non Participating LIP 371 * BIT 10 = Descending Loop ID Search 372 * BIT 11 = Acquire Loop ID in LIPA 373 * BIT 12 = Reserved 374 * BIT 13 = Full Login after LIP 375 * BIT 14 = Node Name Option 376 * BIT 15-31 = Reserved 377 */ 378 uint32_t firmware_options_1; 379 380 /* 381 * BIT 0 = Operation Mode bit 0 382 * BIT 1 = Operation Mode bit 1 383 * BIT 2 = Operation Mode bit 2 384 * BIT 3 = Operation Mode bit 3 385 * BIT 4 = Connection Options bit 0 386 * BIT 5 = Connection Options bit 1 387 * BIT 6 = Connection Options bit 2 388 * BIT 7 = Enable Non part on LIHA failure 389 * 390 * BIT 8 = Enable Class 2 391 * BIT 9 = Enable ACK0 392 * BIT 10 = Reserved 393 * BIT 11 = Enable FC-SP Security 394 * BIT 12 = FC Tape Enable 395 * BIT 13 = Reserved 396 * BIT 14 = Enable Target PRLI Control 397 * BIT 15-31 = Reserved 398 */ 399 uint32_t firmware_options_2; 400 401 /* 402 * BIT 0 = Reserved 403 * BIT 1 = Soft ID only 404 * BIT 2 = Reserved 405 * BIT 3 = Reserved 406 * BIT 4 = FCP RSP Payload bit 0 407 * BIT 5 = FCP RSP Payload bit 1 408 * BIT 6 = Enable Receive Out-of-Order data frame handling 409 * BIT 7 = Disable Automatic PLOGI on Local Loop 410 * 411 * BIT 8 = Reserved 412 * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling 413 * BIT 10 = Reserved 414 * BIT 11 = Reserved 415 * BIT 12 = Reserved 416 * BIT 13 = Data Rate bit 0 417 * BIT 14 = Data Rate bit 1 418 * BIT 15 = Data Rate bit 2 419 * BIT 16 = Enable 75 ohm Termination Select 420 * BIT 17-28 = Reserved 421 * BIT 29 = Enable response queue 0 in index shadowing 422 * BIT 30 = Enable request queue 0 out index shadowing 423 * BIT 31 = Reserved 424 */ 425 uint32_t firmware_options_3; 426 uint16_t qos; 427 uint16_t rid; 428 uint8_t reserved_3[20]; 429 }; 430 431 /* 432 * ISP queue - command entry structure definition. 433 */ 434 #define COMMAND_BIDIRECTIONAL 0x75 435 struct cmd_bidir { 436 uint8_t entry_type; /* Entry type. */ 437 uint8_t entry_count; /* Entry count. */ 438 uint8_t sys_define; /* System defined */ 439 uint8_t entry_status; /* Entry status. */ 440 441 uint32_t handle; /* System handle. */ 442 443 uint16_t nport_handle; /* N_PORT hanlde. */ 444 445 uint16_t timeout; /* Commnad timeout. */ 446 447 uint16_t wr_dseg_count; /* Write Data segment count. */ 448 uint16_t rd_dseg_count; /* Read Data segment count. */ 449 450 struct scsi_lun lun; /* FCP LUN (BE). */ 451 452 uint16_t control_flags; /* Control flags. */ 453 #define BD_WRAP_BACK BIT_3 454 #define BD_READ_DATA BIT_1 455 #define BD_WRITE_DATA BIT_0 456 457 uint16_t fcp_cmnd_dseg_len; /* Data segment length. */ 458 __le64 fcp_cmnd_dseg_address __packed;/* Data segment address. */ 459 460 uint16_t reserved[2]; /* Reserved */ 461 462 uint32_t rd_byte_count; /* Total Byte count Read. */ 463 uint32_t wr_byte_count; /* Total Byte count write. */ 464 465 uint8_t port_id[3]; /* PortID of destination port.*/ 466 uint8_t vp_index; 467 468 struct dsd64 fcp_dsd; 469 }; 470 471 #define COMMAND_TYPE_6 0x48 /* Command Type 6 entry */ 472 struct cmd_type_6 { 473 uint8_t entry_type; /* Entry type. */ 474 uint8_t entry_count; /* Entry count. */ 475 uint8_t sys_define; /* System defined. */ 476 uint8_t entry_status; /* Entry Status. */ 477 478 uint32_t handle; /* System handle. */ 479 480 uint16_t nport_handle; /* N_PORT handle. */ 481 uint16_t timeout; /* Command timeout. */ 482 483 uint16_t dseg_count; /* Data segment count. */ 484 485 uint16_t fcp_rsp_dsd_len; /* FCP_RSP DSD length. */ 486 487 struct scsi_lun lun; /* FCP LUN (BE). */ 488 489 uint16_t control_flags; /* Control flags. */ 490 #define CF_DIF_SEG_DESCR_ENABLE BIT_3 491 #define CF_DATA_SEG_DESCR_ENABLE BIT_2 492 #define CF_READ_DATA BIT_1 493 #define CF_WRITE_DATA BIT_0 494 495 uint16_t fcp_cmnd_dseg_len; /* Data segment length. */ 496 /* Data segment address. */ 497 __le64 fcp_cmnd_dseg_address __packed; 498 /* Data segment address. */ 499 __le64 fcp_rsp_dseg_address __packed; 500 501 uint32_t byte_count; /* Total byte count. */ 502 503 uint8_t port_id[3]; /* PortID of destination port. */ 504 uint8_t vp_index; 505 506 struct dsd64 fcp_dsd; 507 }; 508 509 #define COMMAND_TYPE_7 0x18 /* Command Type 7 entry */ 510 struct cmd_type_7 { 511 uint8_t entry_type; /* Entry type. */ 512 uint8_t entry_count; /* Entry count. */ 513 uint8_t sys_define; /* System defined. */ 514 uint8_t entry_status; /* Entry Status. */ 515 516 uint32_t handle; /* System handle. */ 517 518 uint16_t nport_handle; /* N_PORT handle. */ 519 uint16_t timeout; /* Command timeout. */ 520 #define FW_MAX_TIMEOUT 0x1999 521 522 uint16_t dseg_count; /* Data segment count. */ 523 uint16_t reserved_1; 524 525 struct scsi_lun lun; /* FCP LUN (BE). */ 526 527 uint16_t task_mgmt_flags; /* Task management flags. */ 528 #define TMF_CLEAR_ACA BIT_14 529 #define TMF_TARGET_RESET BIT_13 530 #define TMF_LUN_RESET BIT_12 531 #define TMF_CLEAR_TASK_SET BIT_10 532 #define TMF_ABORT_TASK_SET BIT_9 533 #define TMF_DSD_LIST_ENABLE BIT_2 534 #define TMF_READ_DATA BIT_1 535 #define TMF_WRITE_DATA BIT_0 536 537 uint8_t task; 538 #define TSK_SIMPLE 0 539 #define TSK_HEAD_OF_QUEUE 1 540 #define TSK_ORDERED 2 541 #define TSK_ACA 4 542 #define TSK_UNTAGGED 5 543 544 uint8_t crn; 545 546 uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */ 547 uint32_t byte_count; /* Total byte count. */ 548 549 uint8_t port_id[3]; /* PortID of destination port. */ 550 uint8_t vp_index; 551 552 struct dsd64 dsd; 553 }; 554 555 #define COMMAND_TYPE_CRC_2 0x6A /* Command Type CRC_2 (Type 6) 556 * (T10-DIF) */ 557 struct cmd_type_crc_2 { 558 uint8_t entry_type; /* Entry type. */ 559 uint8_t entry_count; /* Entry count. */ 560 uint8_t sys_define; /* System defined. */ 561 uint8_t entry_status; /* Entry Status. */ 562 563 uint32_t handle; /* System handle. */ 564 565 uint16_t nport_handle; /* N_PORT handle. */ 566 uint16_t timeout; /* Command timeout. */ 567 568 uint16_t dseg_count; /* Data segment count. */ 569 570 uint16_t fcp_rsp_dseg_len; /* FCP_RSP DSD length. */ 571 572 struct scsi_lun lun; /* FCP LUN (BE). */ 573 574 uint16_t control_flags; /* Control flags. */ 575 576 uint16_t fcp_cmnd_dseg_len; /* Data segment length. */ 577 __le64 fcp_cmnd_dseg_address __packed; 578 /* Data segment address. */ 579 __le64 fcp_rsp_dseg_address __packed; 580 581 uint32_t byte_count; /* Total byte count. */ 582 583 uint8_t port_id[3]; /* PortID of destination port. */ 584 uint8_t vp_index; 585 586 __le64 crc_context_address __packed; /* Data segment address. */ 587 uint16_t crc_context_len; /* Data segment length. */ 588 uint16_t reserved_1; /* MUST be set to 0. */ 589 }; 590 591 592 /* 593 * ISP queue - status entry structure definition. 594 */ 595 #define STATUS_TYPE 0x03 /* Status entry. */ 596 struct sts_entry_24xx { 597 uint8_t entry_type; /* Entry type. */ 598 uint8_t entry_count; /* Entry count. */ 599 uint8_t sys_define; /* System defined. */ 600 uint8_t entry_status; /* Entry Status. */ 601 602 uint32_t handle; /* System handle. */ 603 604 uint16_t comp_status; /* Completion status. */ 605 uint16_t ox_id; /* OX_ID used by the firmware. */ 606 607 uint32_t residual_len; /* FW calc residual transfer length. */ 608 609 union { 610 uint16_t reserved_1; 611 uint16_t nvme_rsp_pyld_len; 612 }; 613 614 uint16_t state_flags; /* State flags. */ 615 #define SF_TRANSFERRED_DATA BIT_11 616 #define SF_NVME_ERSP BIT_6 617 #define SF_FCP_RSP_DMA BIT_0 618 619 uint16_t retry_delay; 620 uint16_t scsi_status; /* SCSI status. */ 621 #define SS_CONFIRMATION_REQ BIT_12 622 623 uint32_t rsp_residual_count; /* FCP RSP residual count. */ 624 625 uint32_t sense_len; /* FCP SENSE length. */ 626 627 union { 628 struct { 629 uint32_t rsp_data_len; /* FCP response data length */ 630 uint8_t data[28]; /* FCP rsp/sense information */ 631 }; 632 struct nvme_fc_ersp_iu nvme_ersp; 633 uint8_t nvme_ersp_data[32]; 634 }; 635 636 /* 637 * If DIF Error is set in comp_status, these additional fields are 638 * defined: 639 * 640 * !!! NOTE: Firmware sends expected/actual DIF data in big endian 641 * format; but all of the "data" field gets swab32-d in the beginning 642 * of qla2x00_status_entry(). 643 * 644 * &data[10] : uint8_t report_runt_bg[2]; - computed guard 645 * &data[12] : uint8_t actual_dif[8]; - DIF Data received 646 * &data[20] : uint8_t expected_dif[8]; - DIF Data computed 647 */ 648 }; 649 650 651 /* 652 * Status entry completion status 653 */ 654 #define CS_DATA_REASSEMBLY_ERROR 0x11 /* Data Reassembly Error.. */ 655 #define CS_ABTS_BY_TARGET 0x13 /* Target send ABTS to abort IOCB. */ 656 #define CS_FW_RESOURCE 0x2C /* Firmware Resource Unavailable. */ 657 #define CS_TASK_MGMT_OVERRUN 0x30 /* Task management overrun (8+). */ 658 #define CS_ABORT_BY_TARGET 0x47 /* Abort By Target. */ 659 660 /* 661 * ISP queue - marker entry structure definition. 662 */ 663 #define MARKER_TYPE 0x04 /* Marker entry. */ 664 struct mrk_entry_24xx { 665 uint8_t entry_type; /* Entry type. */ 666 uint8_t entry_count; /* Entry count. */ 667 uint8_t handle_count; /* Handle count. */ 668 uint8_t entry_status; /* Entry Status. */ 669 670 uint32_t handle; /* System handle. */ 671 672 uint16_t nport_handle; /* N_PORT handle. */ 673 674 uint8_t modifier; /* Modifier (7-0). */ 675 #define MK_SYNC_ID_LUN 0 /* Synchronize ID/LUN */ 676 #define MK_SYNC_ID 1 /* Synchronize ID */ 677 #define MK_SYNC_ALL 2 /* Synchronize all ID/LUN */ 678 uint8_t reserved_1; 679 680 uint8_t reserved_2; 681 uint8_t vp_index; 682 683 uint16_t reserved_3; 684 685 uint8_t lun[8]; /* FCP LUN (BE). */ 686 uint8_t reserved_4[40]; 687 }; 688 689 /* 690 * ISP queue - CT Pass-Through entry structure definition. 691 */ 692 #define CT_IOCB_TYPE 0x29 /* CT Pass-Through IOCB entry */ 693 struct ct_entry_24xx { 694 uint8_t entry_type; /* Entry type. */ 695 uint8_t entry_count; /* Entry count. */ 696 uint8_t sys_define; /* System Defined. */ 697 uint8_t entry_status; /* Entry Status. */ 698 699 uint32_t handle; /* System handle. */ 700 701 uint16_t comp_status; /* Completion status. */ 702 703 uint16_t nport_handle; /* N_PORT handle. */ 704 705 uint16_t cmd_dsd_count; 706 707 uint8_t vp_index; 708 uint8_t reserved_1; 709 710 uint16_t timeout; /* Command timeout. */ 711 uint16_t reserved_2; 712 713 uint16_t rsp_dsd_count; 714 715 uint8_t reserved_3[10]; 716 717 uint32_t rsp_byte_count; 718 uint32_t cmd_byte_count; 719 720 struct dsd64 dsd[2]; 721 }; 722 723 /* 724 * ISP queue - ELS Pass-Through entry structure definition. 725 */ 726 #define ELS_IOCB_TYPE 0x53 /* ELS Pass-Through IOCB entry */ 727 struct els_entry_24xx { 728 uint8_t entry_type; /* Entry type. */ 729 uint8_t entry_count; /* Entry count. */ 730 uint8_t sys_define; /* System Defined. */ 731 uint8_t entry_status; /* Entry Status. */ 732 733 uint32_t handle; /* System handle. */ 734 735 uint16_t reserved_1; 736 737 uint16_t nport_handle; /* N_PORT handle. */ 738 739 uint16_t tx_dsd_count; 740 741 uint8_t vp_index; 742 uint8_t sof_type; 743 #define EST_SOFI3 (1 << 4) 744 #define EST_SOFI2 (3 << 4) 745 746 uint32_t rx_xchg_address; /* Receive exchange address. */ 747 uint16_t rx_dsd_count; 748 749 uint8_t opcode; 750 uint8_t reserved_2; 751 752 uint8_t port_id[3]; 753 uint8_t s_id[3]; 754 755 uint16_t control_flags; /* Control flags. */ 756 #define ECF_PAYLOAD_DESCR_MASK (BIT_15|BIT_14|BIT_13) 757 #define EPD_ELS_COMMAND (0 << 13) 758 #define EPD_ELS_ACC (1 << 13) 759 #define EPD_ELS_RJT (2 << 13) 760 #define EPD_RX_XCHG (3 << 13) 761 #define ECF_CLR_PASSTHRU_PEND BIT_12 762 #define ECF_INCL_FRAME_HDR BIT_11 763 764 __le32 rx_byte_count; 765 __le32 tx_byte_count; 766 767 __le64 tx_address __packed; /* Data segment 0 address. */ 768 __le32 tx_len; /* Data segment 0 length. */ 769 __le64 rx_address __packed; /* Data segment 1 address. */ 770 __le32 rx_len; /* Data segment 1 length. */ 771 }; 772 773 struct els_sts_entry_24xx { 774 uint8_t entry_type; /* Entry type. */ 775 uint8_t entry_count; /* Entry count. */ 776 uint8_t sys_define; /* System Defined. */ 777 uint8_t entry_status; /* Entry Status. */ 778 779 uint32_t handle; /* System handle. */ 780 781 uint16_t comp_status; 782 783 uint16_t nport_handle; /* N_PORT handle. */ 784 785 uint16_t reserved_1; 786 787 uint8_t vp_index; 788 uint8_t sof_type; 789 790 uint32_t rx_xchg_address; /* Receive exchange address. */ 791 uint16_t reserved_2; 792 793 uint8_t opcode; 794 uint8_t reserved_3; 795 796 uint8_t port_id[3]; 797 uint8_t reserved_4; 798 799 uint16_t reserved_5; 800 801 uint16_t control_flags; /* Control flags. */ 802 uint32_t total_byte_count; 803 uint32_t error_subcode_1; 804 uint32_t error_subcode_2; 805 }; 806 /* 807 * ISP queue - Mailbox Command entry structure definition. 808 */ 809 #define MBX_IOCB_TYPE 0x39 810 struct mbx_entry_24xx { 811 uint8_t entry_type; /* Entry type. */ 812 uint8_t entry_count; /* Entry count. */ 813 uint8_t handle_count; /* Handle count. */ 814 uint8_t entry_status; /* Entry Status. */ 815 816 uint32_t handle; /* System handle. */ 817 818 uint16_t mbx[28]; 819 }; 820 821 822 #define LOGINOUT_PORT_IOCB_TYPE 0x52 /* Login/Logout Port entry. */ 823 struct logio_entry_24xx { 824 uint8_t entry_type; /* Entry type. */ 825 uint8_t entry_count; /* Entry count. */ 826 uint8_t sys_define; /* System defined. */ 827 uint8_t entry_status; /* Entry Status. */ 828 829 uint32_t handle; /* System handle. */ 830 831 uint16_t comp_status; /* Completion status. */ 832 #define CS_LOGIO_ERROR 0x31 /* Login/Logout IOCB error. */ 833 834 uint16_t nport_handle; /* N_PORT handle. */ 835 836 uint16_t control_flags; /* Control flags. */ 837 /* Modifiers. */ 838 #define LCF_INCLUDE_SNS BIT_10 /* Include SNS (FFFFFC) during LOGO. */ 839 #define LCF_FCP2_OVERRIDE BIT_9 /* Set/Reset word 3 of PRLI. */ 840 #define LCF_CLASS_2 BIT_8 /* Enable class 2 during PLOGI. */ 841 #define LCF_FREE_NPORT BIT_7 /* Release NPORT handle after LOGO. */ 842 #define LCF_EXPL_LOGO BIT_6 /* Perform an explicit LOGO. */ 843 #define LCF_NVME_PRLI BIT_6 /* Perform NVME FC4 PRLI */ 844 #define LCF_SKIP_PRLI BIT_5 /* Skip PRLI after PLOGI. */ 845 #define LCF_IMPL_LOGO_ALL BIT_5 /* Implicit LOGO to all ports. */ 846 #define LCF_COND_PLOGI BIT_4 /* PLOGI only if not logged-in. */ 847 #define LCF_IMPL_LOGO BIT_4 /* Perform an implicit LOGO. */ 848 #define LCF_IMPL_PRLO BIT_4 /* Perform an implicit PRLO. */ 849 /* Commands. */ 850 #define LCF_COMMAND_PLOGI 0x00 /* PLOGI. */ 851 #define LCF_COMMAND_PRLI 0x01 /* PRLI. */ 852 #define LCF_COMMAND_PDISC 0x02 /* PDISC. */ 853 #define LCF_COMMAND_ADISC 0x03 /* ADISC. */ 854 #define LCF_COMMAND_LOGO 0x08 /* LOGO. */ 855 #define LCF_COMMAND_PRLO 0x09 /* PRLO. */ 856 #define LCF_COMMAND_TPRLO 0x0A /* TPRLO. */ 857 858 uint8_t vp_index; 859 uint8_t reserved_1; 860 861 uint8_t port_id[3]; /* PortID of destination port. */ 862 863 uint8_t rsp_size; /* Response size in 32bit words. */ 864 865 uint32_t io_parameter[11]; /* General I/O parameters. */ 866 #define LSC_SCODE_NOLINK 0x01 867 #define LSC_SCODE_NOIOCB 0x02 868 #define LSC_SCODE_NOXCB 0x03 869 #define LSC_SCODE_CMD_FAILED 0x04 870 #define LSC_SCODE_NOFABRIC 0x05 871 #define LSC_SCODE_FW_NOT_READY 0x07 872 #define LSC_SCODE_NOT_LOGGED_IN 0x09 873 #define LSC_SCODE_NOPCB 0x0A 874 875 #define LSC_SCODE_ELS_REJECT 0x18 876 #define LSC_SCODE_CMD_PARAM_ERR 0x19 877 #define LSC_SCODE_PORTID_USED 0x1A 878 #define LSC_SCODE_NPORT_USED 0x1B 879 #define LSC_SCODE_NONPORT 0x1C 880 #define LSC_SCODE_LOGGED_IN 0x1D 881 #define LSC_SCODE_NOFLOGI_ACC 0x1F 882 }; 883 884 #define TSK_MGMT_IOCB_TYPE 0x14 885 struct tsk_mgmt_entry { 886 uint8_t entry_type; /* Entry type. */ 887 uint8_t entry_count; /* Entry count. */ 888 uint8_t handle_count; /* Handle count. */ 889 uint8_t entry_status; /* Entry Status. */ 890 891 uint32_t handle; /* System handle. */ 892 893 uint16_t nport_handle; /* N_PORT handle. */ 894 895 uint16_t reserved_1; 896 897 uint16_t delay; /* Activity delay in seconds. */ 898 899 uint16_t timeout; /* Command timeout. */ 900 901 struct scsi_lun lun; /* FCP LUN (BE). */ 902 903 uint32_t control_flags; /* Control Flags. */ 904 #define TCF_NOTMCMD_TO_TARGET BIT_31 905 #define TCF_LUN_RESET BIT_4 906 #define TCF_ABORT_TASK_SET BIT_3 907 #define TCF_CLEAR_TASK_SET BIT_2 908 #define TCF_TARGET_RESET BIT_1 909 #define TCF_CLEAR_ACA BIT_0 910 911 uint8_t reserved_2[20]; 912 913 uint8_t port_id[3]; /* PortID of destination port. */ 914 uint8_t vp_index; 915 916 uint8_t reserved_3[12]; 917 }; 918 919 #define ABORT_IOCB_TYPE 0x33 920 struct abort_entry_24xx { 921 uint8_t entry_type; /* Entry type. */ 922 uint8_t entry_count; /* Entry count. */ 923 uint8_t handle_count; /* Handle count. */ 924 uint8_t entry_status; /* Entry Status. */ 925 926 uint32_t handle; /* System handle. */ 927 928 uint16_t nport_handle; /* N_PORT handle. */ 929 /* or Completion status. */ 930 931 uint16_t options; /* Options. */ 932 #define AOF_NO_ABTS BIT_0 /* Do not send any ABTS. */ 933 934 uint32_t handle_to_abort; /* System handle to abort. */ 935 936 uint16_t req_que_no; 937 uint8_t reserved_1[30]; 938 939 uint8_t port_id[3]; /* PortID of destination port. */ 940 uint8_t vp_index; 941 942 uint8_t reserved_2[12]; 943 }; 944 945 /* 946 * ISP I/O Register Set structure definitions. 947 */ 948 struct device_reg_24xx { 949 uint32_t flash_addr; /* Flash/NVRAM BIOS address. */ 950 #define FARX_DATA_FLAG BIT_31 951 #define FARX_ACCESS_FLASH_CONF 0x7FFD0000 952 #define FARX_ACCESS_FLASH_DATA 0x7FF00000 953 #define FARX_ACCESS_NVRAM_CONF 0x7FFF0000 954 #define FARX_ACCESS_NVRAM_DATA 0x7FFE0000 955 956 #define FA_NVRAM_FUNC0_ADDR 0x80 957 #define FA_NVRAM_FUNC1_ADDR 0x180 958 959 #define FA_NVRAM_VPD_SIZE 0x200 960 #define FA_NVRAM_VPD0_ADDR 0x00 961 #define FA_NVRAM_VPD1_ADDR 0x100 962 963 #define FA_BOOT_CODE_ADDR 0x00000 964 /* 965 * RISC code begins at offset 512KB 966 * within flash. Consisting of two 967 * contiguous RISC code segments. 968 */ 969 #define FA_RISC_CODE_ADDR 0x20000 970 #define FA_RISC_CODE_SEGMENTS 2 971 972 #define FA_FLASH_DESCR_ADDR_24 0x11000 973 #define FA_FLASH_LAYOUT_ADDR_24 0x11400 974 #define FA_NPIV_CONF0_ADDR_24 0x16000 975 #define FA_NPIV_CONF1_ADDR_24 0x17000 976 977 #define FA_FW_AREA_ADDR 0x40000 978 #define FA_VPD_NVRAM_ADDR 0x48000 979 #define FA_FEATURE_ADDR 0x4C000 980 #define FA_FLASH_DESCR_ADDR 0x50000 981 #define FA_FLASH_LAYOUT_ADDR 0x50400 982 #define FA_HW_EVENT0_ADDR 0x54000 983 #define FA_HW_EVENT1_ADDR 0x54400 984 #define FA_HW_EVENT_SIZE 0x200 985 #define FA_HW_EVENT_ENTRY_SIZE 4 986 #define FA_NPIV_CONF0_ADDR 0x5C000 987 #define FA_NPIV_CONF1_ADDR 0x5D000 988 #define FA_FCP_PRIO0_ADDR 0x10000 989 #define FA_FCP_PRIO1_ADDR 0x12000 990 991 /* 992 * Flash Error Log Event Codes. 993 */ 994 #define HW_EVENT_RESET_ERR 0xF00B 995 #define HW_EVENT_ISP_ERR 0xF020 996 #define HW_EVENT_PARITY_ERR 0xF022 997 #define HW_EVENT_NVRAM_CHKSUM_ERR 0xF023 998 #define HW_EVENT_FLASH_FW_ERR 0xF024 999 1000 uint32_t flash_data; /* Flash/NVRAM BIOS data. */ 1001 1002 uint32_t ctrl_status; /* Control/Status. */ 1003 #define CSRX_FLASH_ACCESS_ERROR BIT_18 /* Flash/NVRAM Access Error. */ 1004 #define CSRX_DMA_ACTIVE BIT_17 /* DMA Active status. */ 1005 #define CSRX_DMA_SHUTDOWN BIT_16 /* DMA Shutdown control status. */ 1006 #define CSRX_FUNCTION BIT_15 /* Function number. */ 1007 /* PCI-X Bus Mode. */ 1008 #define CSRX_PCIX_BUS_MODE_MASK (BIT_11|BIT_10|BIT_9|BIT_8) 1009 #define PBM_PCI_33MHZ (0 << 8) 1010 #define PBM_PCIX_M1_66MHZ (1 << 8) 1011 #define PBM_PCIX_M1_100MHZ (2 << 8) 1012 #define PBM_PCIX_M1_133MHZ (3 << 8) 1013 #define PBM_PCIX_M2_66MHZ (5 << 8) 1014 #define PBM_PCIX_M2_100MHZ (6 << 8) 1015 #define PBM_PCIX_M2_133MHZ (7 << 8) 1016 #define PBM_PCI_66MHZ (8 << 8) 1017 /* Max Write Burst byte count. */ 1018 #define CSRX_MAX_WRT_BURST_MASK (BIT_5|BIT_4) 1019 #define MWB_512_BYTES (0 << 4) 1020 #define MWB_1024_BYTES (1 << 4) 1021 #define MWB_2048_BYTES (2 << 4) 1022 #define MWB_4096_BYTES (3 << 4) 1023 1024 #define CSRX_64BIT_SLOT BIT_2 /* PCI 64-Bit Bus Slot. */ 1025 #define CSRX_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable. */ 1026 #define CSRX_ISP_SOFT_RESET BIT_0 /* ISP soft reset. */ 1027 1028 uint32_t ictrl; /* Interrupt control. */ 1029 #define ICRX_EN_RISC_INT BIT_3 /* Enable RISC interrupts on PCI. */ 1030 1031 uint32_t istatus; /* Interrupt status. */ 1032 #define ISRX_RISC_INT BIT_3 /* RISC interrupt. */ 1033 1034 uint32_t unused_1[2]; /* Gap. */ 1035 1036 /* Request Queue. */ 1037 uint32_t req_q_in; /* In-Pointer. */ 1038 uint32_t req_q_out; /* Out-Pointer. */ 1039 /* Response Queue. */ 1040 uint32_t rsp_q_in; /* In-Pointer. */ 1041 uint32_t rsp_q_out; /* Out-Pointer. */ 1042 /* Priority Request Queue. */ 1043 uint32_t preq_q_in; /* In-Pointer. */ 1044 uint32_t preq_q_out; /* Out-Pointer. */ 1045 1046 uint32_t unused_2[2]; /* Gap. */ 1047 1048 /* ATIO Queue. */ 1049 uint32_t atio_q_in; /* In-Pointer. */ 1050 uint32_t atio_q_out; /* Out-Pointer. */ 1051 1052 uint32_t host_status; 1053 #define HSRX_RISC_INT BIT_15 /* RISC to Host interrupt. */ 1054 #define HSRX_RISC_PAUSED BIT_8 /* RISC Paused. */ 1055 1056 uint32_t hccr; /* Host command & control register. */ 1057 /* HCCR statuses. */ 1058 #define HCCRX_HOST_INT BIT_6 /* Host to RISC interrupt bit. */ 1059 #define HCCRX_RISC_RESET BIT_5 /* RISC Reset mode bit. */ 1060 /* HCCR commands. */ 1061 /* NOOP. */ 1062 #define HCCRX_NOOP 0x00000000 1063 /* Set RISC Reset. */ 1064 #define HCCRX_SET_RISC_RESET 0x10000000 1065 /* Clear RISC Reset. */ 1066 #define HCCRX_CLR_RISC_RESET 0x20000000 1067 /* Set RISC Pause. */ 1068 #define HCCRX_SET_RISC_PAUSE 0x30000000 1069 /* Releases RISC Pause. */ 1070 #define HCCRX_REL_RISC_PAUSE 0x40000000 1071 /* Set HOST to RISC interrupt. */ 1072 #define HCCRX_SET_HOST_INT 0x50000000 1073 /* Clear HOST to RISC interrupt. */ 1074 #define HCCRX_CLR_HOST_INT 0x60000000 1075 /* Clear RISC to PCI interrupt. */ 1076 #define HCCRX_CLR_RISC_INT 0xA0000000 1077 1078 uint32_t gpiod; /* GPIO Data register. */ 1079 1080 /* LED update mask. */ 1081 #define GPDX_LED_UPDATE_MASK (BIT_20|BIT_19|BIT_18) 1082 /* Data update mask. */ 1083 #define GPDX_DATA_UPDATE_MASK (BIT_17|BIT_16) 1084 /* Data update mask. */ 1085 #define GPDX_DATA_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) 1086 /* LED control mask. */ 1087 #define GPDX_LED_COLOR_MASK (BIT_4|BIT_3|BIT_2) 1088 /* LED bit values. Color names as 1089 * referenced in fw spec. 1090 */ 1091 #define GPDX_LED_YELLOW_ON BIT_2 1092 #define GPDX_LED_GREEN_ON BIT_3 1093 #define GPDX_LED_AMBER_ON BIT_4 1094 /* Data in/out. */ 1095 #define GPDX_DATA_INOUT (BIT_1|BIT_0) 1096 1097 uint32_t gpioe; /* GPIO Enable register. */ 1098 /* Enable update mask. */ 1099 #define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16) 1100 /* Enable update mask. */ 1101 #define GPEX_ENABLE_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) 1102 /* Enable. */ 1103 #define GPEX_ENABLE (BIT_1|BIT_0) 1104 1105 uint32_t iobase_addr; /* I/O Bus Base Address register. */ 1106 1107 uint32_t unused_3[10]; /* Gap. */ 1108 1109 uint16_t mailbox0; 1110 uint16_t mailbox1; 1111 uint16_t mailbox2; 1112 uint16_t mailbox3; 1113 uint16_t mailbox4; 1114 uint16_t mailbox5; 1115 uint16_t mailbox6; 1116 uint16_t mailbox7; 1117 uint16_t mailbox8; 1118 uint16_t mailbox9; 1119 uint16_t mailbox10; 1120 uint16_t mailbox11; 1121 uint16_t mailbox12; 1122 uint16_t mailbox13; 1123 uint16_t mailbox14; 1124 uint16_t mailbox15; 1125 uint16_t mailbox16; 1126 uint16_t mailbox17; 1127 uint16_t mailbox18; 1128 uint16_t mailbox19; 1129 uint16_t mailbox20; 1130 uint16_t mailbox21; 1131 uint16_t mailbox22; 1132 uint16_t mailbox23; 1133 uint16_t mailbox24; 1134 uint16_t mailbox25; 1135 uint16_t mailbox26; 1136 uint16_t mailbox27; 1137 uint16_t mailbox28; 1138 uint16_t mailbox29; 1139 uint16_t mailbox30; 1140 uint16_t mailbox31; 1141 1142 uint32_t iobase_window; 1143 uint32_t iobase_c4; 1144 uint32_t iobase_c8; 1145 uint32_t unused_4_1[6]; /* Gap. */ 1146 uint32_t iobase_q; 1147 uint32_t unused_5[2]; /* Gap. */ 1148 uint32_t iobase_select; 1149 uint32_t unused_6[2]; /* Gap. */ 1150 uint32_t iobase_sdata; 1151 }; 1152 /* RISC-RISC semaphore register PCI offet */ 1153 #define RISC_REGISTER_BASE_OFFSET 0x7010 1154 #define RISC_REGISTER_WINDOW_OFFET 0x6 1155 1156 /* RISC-RISC semaphore/flag register (risc address 0x7016) */ 1157 1158 #define RISC_SEMAPHORE 0x1UL 1159 #define RISC_SEMAPHORE_WE (RISC_SEMAPHORE << 16) 1160 #define RISC_SEMAPHORE_CLR (RISC_SEMAPHORE_WE | 0x0UL) 1161 #define RISC_SEMAPHORE_SET (RISC_SEMAPHORE_WE | RISC_SEMAPHORE) 1162 1163 #define RISC_SEMAPHORE_FORCE 0x8000UL 1164 #define RISC_SEMAPHORE_FORCE_WE (RISC_SEMAPHORE_FORCE << 16) 1165 #define RISC_SEMAPHORE_FORCE_CLR (RISC_SEMAPHORE_FORCE_WE | 0x0UL) 1166 #define RISC_SEMAPHORE_FORCE_SET \ 1167 (RISC_SEMAPHORE_FORCE_WE | RISC_SEMAPHORE_FORCE) 1168 1169 /* RISC semaphore timeouts (ms) */ 1170 #define TIMEOUT_SEMAPHORE 2500 1171 #define TIMEOUT_SEMAPHORE_FORCE 2000 1172 #define TIMEOUT_TOTAL_ELAPSED 4500 1173 1174 /* Trace Control *************************************************************/ 1175 1176 #define TC_AEN_DISABLE 0 1177 1178 #define TC_EFT_ENABLE 4 1179 #define TC_EFT_DISABLE 5 1180 1181 #define TC_FCE_ENABLE 8 1182 #define TC_FCE_OPTIONS 0 1183 #define TC_FCE_DEFAULT_RX_SIZE 2112 1184 #define TC_FCE_DEFAULT_TX_SIZE 2112 1185 #define TC_FCE_DISABLE 9 1186 #define TC_FCE_DISABLE_TRACE BIT_0 1187 1188 /* MID Support ***************************************************************/ 1189 1190 #define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */ 1191 #define MAX_MULTI_ID_FABRIC 256 /* ... */ 1192 1193 struct mid_conf_entry_24xx { 1194 uint16_t reserved_1; 1195 1196 /* 1197 * BIT 0 = Enable Hard Loop Id 1198 * BIT 1 = Acquire Loop ID in LIPA 1199 * BIT 2 = ID not Acquired 1200 * BIT 3 = Enable VP 1201 * BIT 4 = Enable Initiator Mode 1202 * BIT 5 = Disable Target Mode 1203 * BIT 6-7 = Reserved 1204 */ 1205 uint8_t options; 1206 1207 uint8_t hard_address; 1208 1209 uint8_t port_name[WWN_SIZE]; 1210 uint8_t node_name[WWN_SIZE]; 1211 }; 1212 1213 struct mid_init_cb_24xx { 1214 struct init_cb_24xx init_cb; 1215 1216 uint16_t count; 1217 uint16_t options; 1218 1219 struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC]; 1220 }; 1221 1222 1223 struct mid_db_entry_24xx { 1224 uint16_t status; 1225 #define MDBS_NON_PARTIC BIT_3 1226 #define MDBS_ID_ACQUIRED BIT_1 1227 #define MDBS_ENABLED BIT_0 1228 1229 uint8_t options; 1230 uint8_t hard_address; 1231 1232 uint8_t port_name[WWN_SIZE]; 1233 uint8_t node_name[WWN_SIZE]; 1234 1235 uint8_t port_id[3]; 1236 uint8_t reserved_1; 1237 }; 1238 1239 /* 1240 * Virtual Port Control IOCB 1241 */ 1242 #define VP_CTRL_IOCB_TYPE 0x30 /* Virtual Port Control entry. */ 1243 struct vp_ctrl_entry_24xx { 1244 uint8_t entry_type; /* Entry type. */ 1245 uint8_t entry_count; /* Entry count. */ 1246 uint8_t sys_define; /* System defined. */ 1247 uint8_t entry_status; /* Entry Status. */ 1248 1249 uint32_t handle; /* System handle. */ 1250 1251 uint16_t vp_idx_failed; 1252 1253 uint16_t comp_status; /* Completion status. */ 1254 #define CS_VCE_IOCB_ERROR 0x01 /* Error processing IOCB */ 1255 #define CS_VCE_ACQ_ID_ERROR 0x02 /* Error while acquireing ID. */ 1256 #define CS_VCE_BUSY 0x05 /* Firmware not ready to accept cmd. */ 1257 1258 uint16_t command; 1259 #define VCE_COMMAND_ENABLE_VPS 0x00 /* Enable VPs. */ 1260 #define VCE_COMMAND_DISABLE_VPS 0x08 /* Disable VPs. */ 1261 #define VCE_COMMAND_DISABLE_VPS_REINIT 0x09 /* Disable VPs and reinit link. */ 1262 #define VCE_COMMAND_DISABLE_VPS_LOGO 0x0a /* Disable VPs and LOGO ports. */ 1263 #define VCE_COMMAND_DISABLE_VPS_LOGO_ALL 0x0b /* Disable VPs and LOGO ports. */ 1264 1265 uint16_t vp_count; 1266 1267 uint8_t vp_idx_map[16]; 1268 uint16_t flags; 1269 uint16_t id; 1270 uint16_t reserved_4; 1271 uint16_t hopct; 1272 uint8_t reserved_5[24]; 1273 }; 1274 1275 /* 1276 * Modify Virtual Port Configuration IOCB 1277 */ 1278 #define VP_CONFIG_IOCB_TYPE 0x31 /* Virtual Port Config entry. */ 1279 struct vp_config_entry_24xx { 1280 uint8_t entry_type; /* Entry type. */ 1281 uint8_t entry_count; /* Entry count. */ 1282 uint8_t handle_count; 1283 uint8_t entry_status; /* Entry Status. */ 1284 1285 uint32_t handle; /* System handle. */ 1286 1287 uint16_t flags; 1288 #define CS_VF_BIND_VPORTS_TO_VF BIT_0 1289 #define CS_VF_SET_QOS_OF_VPORTS BIT_1 1290 #define CS_VF_SET_HOPS_OF_VPORTS BIT_2 1291 1292 uint16_t comp_status; /* Completion status. */ 1293 #define CS_VCT_STS_ERROR 0x01 /* Specified VPs were not disabled. */ 1294 #define CS_VCT_CNT_ERROR 0x02 /* Invalid VP count. */ 1295 #define CS_VCT_ERROR 0x03 /* Unknown error. */ 1296 #define CS_VCT_IDX_ERROR 0x02 /* Invalid VP index. */ 1297 #define CS_VCT_BUSY 0x05 /* Firmware not ready to accept cmd. */ 1298 1299 uint8_t command; 1300 #define VCT_COMMAND_MOD_VPS 0x00 /* Modify VP configurations. */ 1301 #define VCT_COMMAND_MOD_ENABLE_VPS 0x01 /* Modify configuration & enable VPs. */ 1302 1303 uint8_t vp_count; 1304 1305 uint8_t vp_index1; 1306 uint8_t vp_index2; 1307 1308 uint8_t options_idx1; 1309 uint8_t hard_address_idx1; 1310 uint16_t reserved_vp1; 1311 uint8_t port_name_idx1[WWN_SIZE]; 1312 uint8_t node_name_idx1[WWN_SIZE]; 1313 1314 uint8_t options_idx2; 1315 uint8_t hard_address_idx2; 1316 uint16_t reserved_vp2; 1317 uint8_t port_name_idx2[WWN_SIZE]; 1318 uint8_t node_name_idx2[WWN_SIZE]; 1319 uint16_t id; 1320 uint16_t reserved_4; 1321 uint16_t hopct; 1322 uint8_t reserved_5[2]; 1323 }; 1324 1325 #define VP_RPT_ID_IOCB_TYPE 0x32 /* Report ID Acquisition entry. */ 1326 enum VP_STATUS { 1327 VP_STAT_COMPL, 1328 VP_STAT_FAIL, 1329 VP_STAT_ID_CHG, 1330 VP_STAT_SNS_TO, /* timeout */ 1331 VP_STAT_SNS_RJT, 1332 VP_STAT_SCR_TO, /* timeout */ 1333 VP_STAT_SCR_RJT, 1334 }; 1335 1336 enum VP_FLAGS { 1337 VP_FLAGS_CON_FLOOP = 1, 1338 VP_FLAGS_CON_P2P = 2, 1339 VP_FLAGS_CON_FABRIC = 3, 1340 VP_FLAGS_NAME_VALID = BIT_5, 1341 }; 1342 1343 struct vp_rpt_id_entry_24xx { 1344 uint8_t entry_type; /* Entry type. */ 1345 uint8_t entry_count; /* Entry count. */ 1346 uint8_t sys_define; /* System defined. */ 1347 uint8_t entry_status; /* Entry Status. */ 1348 uint32_t resv1; 1349 uint8_t vp_acquired; 1350 uint8_t vp_setup; 1351 uint8_t vp_idx; /* Format 0=reserved */ 1352 uint8_t vp_status; /* Format 0=reserved */ 1353 1354 uint8_t port_id[3]; 1355 uint8_t format; 1356 union { 1357 struct _f0 { 1358 /* format 0 loop */ 1359 uint8_t vp_idx_map[16]; 1360 uint8_t reserved_4[32]; 1361 } f0; 1362 struct _f1 { 1363 /* format 1 fabric */ 1364 uint8_t vpstat1_subcode; /* vp_status=1 subcode */ 1365 uint8_t flags; 1366 #define TOPO_MASK 0xE 1367 #define TOPO_FL 0x2 1368 #define TOPO_N2N 0x4 1369 #define TOPO_F 0x6 1370 1371 uint16_t fip_flags; 1372 uint8_t rsv2[12]; 1373 1374 uint8_t ls_rjt_vendor; 1375 uint8_t ls_rjt_explanation; 1376 uint8_t ls_rjt_reason; 1377 uint8_t rsv3[5]; 1378 1379 uint8_t port_name[8]; 1380 uint8_t node_name[8]; 1381 uint16_t bbcr; 1382 uint8_t reserved_5[6]; 1383 } f1; 1384 struct _f2 { /* format 2: N2N direct connect */ 1385 uint8_t vpstat1_subcode; 1386 uint8_t flags; 1387 uint16_t fip_flags; 1388 uint8_t rsv2[12]; 1389 1390 uint8_t ls_rjt_vendor; 1391 uint8_t ls_rjt_explanation; 1392 uint8_t ls_rjt_reason; 1393 uint8_t rsv3[5]; 1394 1395 uint8_t port_name[8]; 1396 uint8_t node_name[8]; 1397 uint16_t bbcr; 1398 uint8_t reserved_5[2]; 1399 uint8_t remote_nport_id[4]; 1400 } f2; 1401 } u; 1402 }; 1403 1404 #define VF_EVFP_IOCB_TYPE 0x26 /* Exchange Virtual Fabric Parameters entry. */ 1405 struct vf_evfp_entry_24xx { 1406 uint8_t entry_type; /* Entry type. */ 1407 uint8_t entry_count; /* Entry count. */ 1408 uint8_t sys_define; /* System defined. */ 1409 uint8_t entry_status; /* Entry Status. */ 1410 1411 uint32_t handle; /* System handle. */ 1412 uint16_t comp_status; /* Completion status. */ 1413 uint16_t timeout; /* timeout */ 1414 uint16_t adim_tagging_mode; 1415 1416 uint16_t vfport_id; 1417 uint32_t exch_addr; 1418 1419 uint16_t nport_handle; /* N_PORT handle. */ 1420 uint16_t control_flags; 1421 uint32_t io_parameter_0; 1422 uint32_t io_parameter_1; 1423 __le64 tx_address __packed; /* Data segment 0 address. */ 1424 uint32_t tx_len; /* Data segment 0 length. */ 1425 __le64 rx_address __packed; /* Data segment 1 address. */ 1426 uint32_t rx_len; /* Data segment 1 length. */ 1427 }; 1428 1429 /* END MID Support ***********************************************************/ 1430 1431 /* Flash Description Table ***************************************************/ 1432 1433 struct qla_fdt_layout { 1434 uint8_t sig[4]; 1435 uint16_t version; 1436 uint16_t len; 1437 uint16_t checksum; 1438 uint8_t unused1[2]; 1439 uint8_t model[16]; 1440 uint16_t man_id; 1441 uint16_t id; 1442 uint8_t flags; 1443 uint8_t erase_cmd; 1444 uint8_t alt_erase_cmd; 1445 uint8_t wrt_enable_cmd; 1446 uint8_t wrt_enable_bits; 1447 uint8_t wrt_sts_reg_cmd; 1448 uint8_t unprotect_sec_cmd; 1449 uint8_t read_man_id_cmd; 1450 uint32_t block_size; 1451 uint32_t alt_block_size; 1452 uint32_t flash_size; 1453 uint32_t wrt_enable_data; 1454 uint8_t read_id_addr_len; 1455 uint8_t wrt_disable_bits; 1456 uint8_t read_dev_id_len; 1457 uint8_t chip_erase_cmd; 1458 uint16_t read_timeout; 1459 uint8_t protect_sec_cmd; 1460 uint8_t unused2[65]; 1461 }; 1462 1463 /* Flash Layout Table ********************************************************/ 1464 1465 struct qla_flt_location { 1466 uint8_t sig[4]; 1467 uint16_t start_lo; 1468 uint16_t start_hi; 1469 uint8_t version; 1470 uint8_t unused[5]; 1471 uint16_t checksum; 1472 }; 1473 1474 #define FLT_REG_FW 0x01 1475 #define FLT_REG_BOOT_CODE 0x07 1476 #define FLT_REG_VPD_0 0x14 1477 #define FLT_REG_NVRAM_0 0x15 1478 #define FLT_REG_VPD_1 0x16 1479 #define FLT_REG_NVRAM_1 0x17 1480 #define FLT_REG_VPD_2 0xD4 1481 #define FLT_REG_NVRAM_2 0xD5 1482 #define FLT_REG_VPD_3 0xD6 1483 #define FLT_REG_NVRAM_3 0xD7 1484 #define FLT_REG_FDT 0x1a 1485 #define FLT_REG_FLT 0x1c 1486 #define FLT_REG_HW_EVENT_0 0x1d 1487 #define FLT_REG_HW_EVENT_1 0x1f 1488 #define FLT_REG_NPIV_CONF_0 0x29 1489 #define FLT_REG_NPIV_CONF_1 0x2a 1490 #define FLT_REG_GOLD_FW 0x2f 1491 #define FLT_REG_FCP_PRIO_0 0x87 1492 #define FLT_REG_FCP_PRIO_1 0x88 1493 #define FLT_REG_CNA_FW 0x97 1494 #define FLT_REG_BOOT_CODE_8044 0xA2 1495 #define FLT_REG_FCOE_FW 0xA4 1496 #define FLT_REG_FCOE_NVRAM_0 0xAA 1497 #define FLT_REG_FCOE_NVRAM_1 0xAC 1498 1499 /* 27xx */ 1500 #define FLT_REG_IMG_PRI_27XX 0x95 1501 #define FLT_REG_IMG_SEC_27XX 0x96 1502 #define FLT_REG_FW_SEC_27XX 0x02 1503 #define FLT_REG_BOOTLOAD_SEC_27XX 0x9 1504 #define FLT_REG_VPD_SEC_27XX_0 0x50 1505 #define FLT_REG_VPD_SEC_27XX_1 0x52 1506 #define FLT_REG_VPD_SEC_27XX_2 0xD8 1507 #define FLT_REG_VPD_SEC_27XX_3 0xDA 1508 1509 /* 28xx */ 1510 #define FLT_REG_AUX_IMG_PRI_28XX 0x125 1511 #define FLT_REG_AUX_IMG_SEC_28XX 0x126 1512 #define FLT_REG_VPD_SEC_28XX_0 0x10C 1513 #define FLT_REG_VPD_SEC_28XX_1 0x10E 1514 #define FLT_REG_VPD_SEC_28XX_2 0x110 1515 #define FLT_REG_VPD_SEC_28XX_3 0x112 1516 #define FLT_REG_NVRAM_SEC_28XX_0 0x10D 1517 #define FLT_REG_NVRAM_SEC_28XX_1 0x10F 1518 #define FLT_REG_NVRAM_SEC_28XX_2 0x111 1519 #define FLT_REG_NVRAM_SEC_28XX_3 0x113 1520 #define FLT_REG_MPI_PRI_28XX 0xD3 1521 #define FLT_REG_MPI_SEC_28XX 0xF0 1522 #define FLT_REG_PEP_PRI_28XX 0xD1 1523 #define FLT_REG_PEP_SEC_28XX 0xF1 1524 1525 struct qla_flt_region { 1526 uint16_t code; 1527 uint8_t attribute; 1528 uint8_t reserved; 1529 uint32_t size; 1530 uint32_t start; 1531 uint32_t end; 1532 }; 1533 1534 struct qla_flt_header { 1535 uint16_t version; 1536 uint16_t length; 1537 uint16_t checksum; 1538 uint16_t unused; 1539 struct qla_flt_region region[0]; 1540 }; 1541 1542 #define FLT_REGION_SIZE 16 1543 #define FLT_MAX_REGIONS 0xFF 1544 #define FLT_REGIONS_SIZE (FLT_REGION_SIZE * FLT_MAX_REGIONS) 1545 1546 /* Flash NPIV Configuration Table ********************************************/ 1547 1548 struct qla_npiv_header { 1549 uint8_t sig[2]; 1550 uint16_t version; 1551 uint16_t entries; 1552 uint16_t unused[4]; 1553 uint16_t checksum; 1554 }; 1555 1556 struct qla_npiv_entry { 1557 uint16_t flags; 1558 uint16_t vf_id; 1559 uint8_t q_qos; 1560 uint8_t f_qos; 1561 uint16_t unused1; 1562 uint8_t port_name[WWN_SIZE]; 1563 uint8_t node_name[WWN_SIZE]; 1564 }; 1565 1566 /* 84XX Support **************************************************************/ 1567 1568 #define MBA_ISP84XX_ALERT 0x800f /* Alert Notification. */ 1569 #define A84_PANIC_RECOVERY 0x1 1570 #define A84_OP_LOGIN_COMPLETE 0x2 1571 #define A84_DIAG_LOGIN_COMPLETE 0x3 1572 #define A84_GOLD_LOGIN_COMPLETE 0x4 1573 1574 #define MBC_ISP84XX_RESET 0x3a /* Reset. */ 1575 1576 #define FSTATE_REMOTE_FC_DOWN BIT_0 1577 #define FSTATE_NSL_LINK_DOWN BIT_1 1578 #define FSTATE_IS_DIAG_FW BIT_2 1579 #define FSTATE_LOGGED_IN BIT_3 1580 #define FSTATE_WAITING_FOR_VERIFY BIT_4 1581 1582 #define VERIFY_CHIP_IOCB_TYPE 0x1B 1583 struct verify_chip_entry_84xx { 1584 uint8_t entry_type; 1585 uint8_t entry_count; 1586 uint8_t sys_defined; 1587 uint8_t entry_status; 1588 1589 uint32_t handle; 1590 1591 uint16_t options; 1592 #define VCO_DONT_UPDATE_FW BIT_0 1593 #define VCO_FORCE_UPDATE BIT_1 1594 #define VCO_DONT_RESET_UPDATE BIT_2 1595 #define VCO_DIAG_FW BIT_3 1596 #define VCO_END_OF_DATA BIT_14 1597 #define VCO_ENABLE_DSD BIT_15 1598 1599 uint16_t reserved_1; 1600 1601 uint16_t data_seg_cnt; 1602 uint16_t reserved_2[3]; 1603 1604 uint32_t fw_ver; 1605 uint32_t exchange_address; 1606 1607 uint32_t reserved_3[3]; 1608 uint32_t fw_size; 1609 uint32_t fw_seq_size; 1610 uint32_t relative_offset; 1611 1612 struct dsd64 dsd; 1613 }; 1614 1615 struct verify_chip_rsp_84xx { 1616 uint8_t entry_type; 1617 uint8_t entry_count; 1618 uint8_t sys_defined; 1619 uint8_t entry_status; 1620 1621 uint32_t handle; 1622 1623 uint16_t comp_status; 1624 #define CS_VCS_CHIP_FAILURE 0x3 1625 #define CS_VCS_BAD_EXCHANGE 0x8 1626 #define CS_VCS_SEQ_COMPLETEi 0x40 1627 1628 uint16_t failure_code; 1629 #define VFC_CHECKSUM_ERROR 0x1 1630 #define VFC_INVALID_LEN 0x2 1631 #define VFC_ALREADY_IN_PROGRESS 0x8 1632 1633 uint16_t reserved_1[4]; 1634 1635 uint32_t fw_ver; 1636 uint32_t exchange_address; 1637 1638 uint32_t reserved_2[6]; 1639 }; 1640 1641 #define ACCESS_CHIP_IOCB_TYPE 0x2B 1642 struct access_chip_84xx { 1643 uint8_t entry_type; 1644 uint8_t entry_count; 1645 uint8_t sys_defined; 1646 uint8_t entry_status; 1647 1648 uint32_t handle; 1649 1650 uint16_t options; 1651 #define ACO_DUMP_MEMORY 0x0 1652 #define ACO_LOAD_MEMORY 0x1 1653 #define ACO_CHANGE_CONFIG_PARAM 0x2 1654 #define ACO_REQUEST_INFO 0x3 1655 1656 uint16_t reserved1; 1657 1658 uint16_t dseg_count; 1659 uint16_t reserved2[3]; 1660 1661 uint32_t parameter1; 1662 uint32_t parameter2; 1663 uint32_t parameter3; 1664 1665 uint32_t reserved3[3]; 1666 uint32_t total_byte_cnt; 1667 uint32_t reserved4; 1668 1669 struct dsd64 dsd; 1670 }; 1671 1672 struct access_chip_rsp_84xx { 1673 uint8_t entry_type; 1674 uint8_t entry_count; 1675 uint8_t sys_defined; 1676 uint8_t entry_status; 1677 1678 uint32_t handle; 1679 1680 uint16_t comp_status; 1681 uint16_t failure_code; 1682 uint32_t residual_count; 1683 1684 uint32_t reserved[12]; 1685 }; 1686 1687 /* 81XX Support **************************************************************/ 1688 1689 #define MBA_DCBX_START 0x8016 1690 #define MBA_DCBX_COMPLETE 0x8030 1691 #define MBA_FCF_CONF_ERR 0x8031 1692 #define MBA_DCBX_PARAM_UPDATE 0x8032 1693 #define MBA_IDC_COMPLETE 0x8100 1694 #define MBA_IDC_NOTIFY 0x8101 1695 #define MBA_IDC_TIME_EXT 0x8102 1696 1697 #define MBC_IDC_ACK 0x101 1698 #define MBC_RESTART_MPI_FW 0x3d 1699 #define MBC_FLASH_ACCESS_CTRL 0x3e /* Control flash access. */ 1700 #define MBC_GET_XGMAC_STATS 0x7a 1701 #define MBC_GET_DCBX_PARAMS 0x51 1702 1703 /* 1704 * ISP83xx mailbox commands 1705 */ 1706 #define MBC_WRITE_REMOTE_REG 0x0001 /* Write remote register */ 1707 #define MBC_READ_REMOTE_REG 0x0009 /* Read remote register */ 1708 #define MBC_RESTART_NIC_FIRMWARE 0x003d /* Restart NIC firmware */ 1709 #define MBC_SET_ACCESS_CONTROL 0x003e /* Access control command */ 1710 1711 /* Flash access control option field bit definitions */ 1712 #define FAC_OPT_FORCE_SEMAPHORE BIT_15 1713 #define FAC_OPT_REQUESTOR_ID BIT_14 1714 #define FAC_OPT_CMD_SUBCODE 0xff 1715 1716 /* Flash access control command subcodes */ 1717 #define FAC_OPT_CMD_WRITE_PROTECT 0x00 1718 #define FAC_OPT_CMD_WRITE_ENABLE 0x01 1719 #define FAC_OPT_CMD_ERASE_SECTOR 0x02 1720 #define FAC_OPT_CMD_LOCK_SEMAPHORE 0x03 1721 #define FAC_OPT_CMD_UNLOCK_SEMAPHORE 0x04 1722 #define FAC_OPT_CMD_GET_SECTOR_SIZE 0x05 1723 1724 /* enhanced features bit definitions */ 1725 #define NEF_LR_DIST_ENABLE BIT_0 1726 1727 /* LR Distance bit positions */ 1728 #define LR_DIST_NV_POS 2 1729 #define LR_DIST_FW_POS 12 1730 #define LR_DIST_FW_SHIFT (LR_DIST_FW_POS - LR_DIST_NV_POS) 1731 #define LR_DIST_FW_FIELD(x) ((x) << LR_DIST_FW_SHIFT & 0xf000) 1732 1733 /* FAC semaphore defines */ 1734 #define FAC_SEMAPHORE_UNLOCK 0 1735 #define FAC_SEMAPHORE_LOCK 1 1736 1737 struct nvram_81xx { 1738 /* NVRAM header. */ 1739 uint8_t id[4]; 1740 uint16_t nvram_version; 1741 uint16_t reserved_0; 1742 1743 /* Firmware Initialization Control Block. */ 1744 uint16_t version; 1745 uint16_t reserved_1; 1746 uint16_t frame_payload_size; 1747 uint16_t execution_throttle; 1748 uint16_t exchange_count; 1749 uint16_t reserved_2; 1750 1751 uint8_t port_name[WWN_SIZE]; 1752 uint8_t node_name[WWN_SIZE]; 1753 1754 uint16_t login_retry_count; 1755 uint16_t reserved_3; 1756 uint16_t interrupt_delay_timer; 1757 uint16_t login_timeout; 1758 1759 uint32_t firmware_options_1; 1760 uint32_t firmware_options_2; 1761 uint32_t firmware_options_3; 1762 1763 uint16_t reserved_4[4]; 1764 1765 /* Offset 64. */ 1766 uint8_t enode_mac[6]; 1767 uint16_t reserved_5[5]; 1768 1769 /* Offset 80. */ 1770 uint16_t reserved_6[24]; 1771 1772 /* Offset 128. */ 1773 uint16_t ex_version; 1774 uint8_t prio_fcf_matching_flags; 1775 uint8_t reserved_6_1[3]; 1776 uint16_t pri_fcf_vlan_id; 1777 uint8_t pri_fcf_fabric_name[8]; 1778 uint16_t reserved_6_2[7]; 1779 uint8_t spma_mac_addr[6]; 1780 uint16_t reserved_6_3[14]; 1781 1782 /* Offset 192. */ 1783 uint8_t min_supported_speed; 1784 uint8_t reserved_7_0; 1785 uint16_t reserved_7[31]; 1786 1787 /* 1788 * BIT 0 = Enable spinup delay 1789 * BIT 1 = Disable BIOS 1790 * BIT 2 = Enable Memory Map BIOS 1791 * BIT 3 = Enable Selectable Boot 1792 * BIT 4 = Disable RISC code load 1793 * BIT 5 = Disable Serdes 1794 * BIT 6 = Opt boot mode 1795 * BIT 7 = Interrupt enable 1796 * 1797 * BIT 8 = EV Control enable 1798 * BIT 9 = Enable lip reset 1799 * BIT 10 = Enable lip full login 1800 * BIT 11 = Enable target reset 1801 * BIT 12 = Stop firmware 1802 * BIT 13 = Enable nodename option 1803 * BIT 14 = Default WWPN valid 1804 * BIT 15 = Enable alternate WWN 1805 * 1806 * BIT 16 = CLP LUN string 1807 * BIT 17 = CLP Target string 1808 * BIT 18 = CLP BIOS enable string 1809 * BIT 19 = CLP Serdes string 1810 * BIT 20 = CLP WWPN string 1811 * BIT 21 = CLP WWNN string 1812 * BIT 22 = 1813 * BIT 23 = 1814 * BIT 24 = Keep WWPN 1815 * BIT 25 = Temp WWPN 1816 * BIT 26-31 = 1817 */ 1818 uint32_t host_p; 1819 1820 uint8_t alternate_port_name[WWN_SIZE]; 1821 uint8_t alternate_node_name[WWN_SIZE]; 1822 1823 uint8_t boot_port_name[WWN_SIZE]; 1824 uint16_t boot_lun_number; 1825 uint16_t reserved_8; 1826 1827 uint8_t alt1_boot_port_name[WWN_SIZE]; 1828 uint16_t alt1_boot_lun_number; 1829 uint16_t reserved_9; 1830 1831 uint8_t alt2_boot_port_name[WWN_SIZE]; 1832 uint16_t alt2_boot_lun_number; 1833 uint16_t reserved_10; 1834 1835 uint8_t alt3_boot_port_name[WWN_SIZE]; 1836 uint16_t alt3_boot_lun_number; 1837 uint16_t reserved_11; 1838 1839 /* 1840 * BIT 0 = Selective Login 1841 * BIT 1 = Alt-Boot Enable 1842 * BIT 2 = Reserved 1843 * BIT 3 = Boot Order List 1844 * BIT 4 = Reserved 1845 * BIT 5 = Selective LUN 1846 * BIT 6 = Reserved 1847 * BIT 7-31 = 1848 */ 1849 uint32_t efi_parameters; 1850 1851 uint8_t reset_delay; 1852 uint8_t reserved_12; 1853 uint16_t reserved_13; 1854 1855 uint16_t boot_id_number; 1856 uint16_t reserved_14; 1857 1858 uint16_t max_luns_per_target; 1859 uint16_t reserved_15; 1860 1861 uint16_t port_down_retry_count; 1862 uint16_t link_down_timeout; 1863 1864 /* FCode parameters. */ 1865 uint16_t fcode_parameter; 1866 1867 uint16_t reserved_16[3]; 1868 1869 /* Offset 352. */ 1870 uint8_t reserved_17[4]; 1871 uint16_t reserved_18[5]; 1872 uint8_t reserved_19[2]; 1873 uint16_t reserved_20[8]; 1874 1875 /* Offset 384. */ 1876 uint8_t reserved_21[16]; 1877 uint16_t reserved_22[3]; 1878 1879 /* Offset 406 (0x196) Enhanced Features 1880 * BIT 0 = Extended BB credits for LR 1881 * BIT 1 = Virtual Fabric Enable 1882 * BIT 2-5 = Distance Support if BIT 0 is on 1883 * BIT 6-15 = Unused 1884 */ 1885 uint16_t enhanced_features; 1886 uint16_t reserved_24[4]; 1887 1888 /* Offset 416. */ 1889 uint16_t reserved_25[32]; 1890 1891 /* Offset 480. */ 1892 uint8_t model_name[16]; 1893 1894 /* Offset 496. */ 1895 uint16_t feature_mask_l; 1896 uint16_t feature_mask_h; 1897 uint16_t reserved_26[2]; 1898 1899 uint16_t subsystem_vendor_id; 1900 uint16_t subsystem_device_id; 1901 1902 uint32_t checksum; 1903 }; 1904 1905 /* 1906 * ISP Initialization Control Block. 1907 * Little endian except where noted. 1908 */ 1909 #define ICB_VERSION 1 1910 struct init_cb_81xx { 1911 uint16_t version; 1912 uint16_t reserved_1; 1913 1914 uint16_t frame_payload_size; 1915 uint16_t execution_throttle; 1916 uint16_t exchange_count; 1917 1918 uint16_t reserved_2; 1919 1920 uint8_t port_name[WWN_SIZE]; /* Big endian. */ 1921 uint8_t node_name[WWN_SIZE]; /* Big endian. */ 1922 1923 uint16_t response_q_inpointer; 1924 uint16_t request_q_outpointer; 1925 1926 uint16_t login_retry_count; 1927 1928 uint16_t prio_request_q_outpointer; 1929 1930 uint16_t response_q_length; 1931 uint16_t request_q_length; 1932 1933 uint16_t reserved_3; 1934 1935 uint16_t prio_request_q_length; 1936 1937 __le64 request_q_address __packed; 1938 __le64 response_q_address __packed; 1939 __le64 prio_request_q_address __packed; 1940 1941 uint8_t reserved_4[8]; 1942 1943 uint16_t atio_q_inpointer; 1944 uint16_t atio_q_length; 1945 __le64 atio_q_address __packed; 1946 1947 uint16_t interrupt_delay_timer; /* 100us increments. */ 1948 uint16_t login_timeout; 1949 1950 /* 1951 * BIT 0-3 = Reserved 1952 * BIT 4 = Enable Target Mode 1953 * BIT 5 = Disable Initiator Mode 1954 * BIT 6 = Reserved 1955 * BIT 7 = Reserved 1956 * 1957 * BIT 8-13 = Reserved 1958 * BIT 14 = Node Name Option 1959 * BIT 15-31 = Reserved 1960 */ 1961 uint32_t firmware_options_1; 1962 1963 /* 1964 * BIT 0 = Operation Mode bit 0 1965 * BIT 1 = Operation Mode bit 1 1966 * BIT 2 = Operation Mode bit 2 1967 * BIT 3 = Operation Mode bit 3 1968 * BIT 4-7 = Reserved 1969 * 1970 * BIT 8 = Enable Class 2 1971 * BIT 9 = Enable ACK0 1972 * BIT 10 = Reserved 1973 * BIT 11 = Enable FC-SP Security 1974 * BIT 12 = FC Tape Enable 1975 * BIT 13 = Reserved 1976 * BIT 14 = Enable Target PRLI Control 1977 * BIT 15-31 = Reserved 1978 */ 1979 uint32_t firmware_options_2; 1980 1981 /* 1982 * BIT 0-3 = Reserved 1983 * BIT 4 = FCP RSP Payload bit 0 1984 * BIT 5 = FCP RSP Payload bit 1 1985 * BIT 6 = Enable Receive Out-of-Order data frame handling 1986 * BIT 7 = Reserved 1987 * 1988 * BIT 8 = Reserved 1989 * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling 1990 * BIT 10-16 = Reserved 1991 * BIT 17 = Enable multiple FCFs 1992 * BIT 18-20 = MAC addressing mode 1993 * BIT 21-25 = Ethernet data rate 1994 * BIT 26 = Enable ethernet header rx IOCB for ATIO q 1995 * BIT 27 = Enable ethernet header rx IOCB for response q 1996 * BIT 28 = SPMA selection bit 0 1997 * BIT 28 = SPMA selection bit 1 1998 * BIT 30-31 = Reserved 1999 */ 2000 uint32_t firmware_options_3; 2001 2002 uint8_t reserved_5[8]; 2003 2004 uint8_t enode_mac[6]; 2005 2006 uint8_t reserved_6[10]; 2007 }; 2008 2009 struct mid_init_cb_81xx { 2010 struct init_cb_81xx init_cb; 2011 2012 uint16_t count; 2013 uint16_t options; 2014 2015 struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC]; 2016 }; 2017 2018 struct ex_init_cb_81xx { 2019 uint16_t ex_version; 2020 uint8_t prio_fcf_matching_flags; 2021 uint8_t reserved_1[3]; 2022 uint16_t pri_fcf_vlan_id; 2023 uint8_t pri_fcf_fabric_name[8]; 2024 uint16_t reserved_2[7]; 2025 uint8_t spma_mac_addr[6]; 2026 uint16_t reserved_3[14]; 2027 }; 2028 2029 #define FARX_ACCESS_FLASH_CONF_81XX 0x7FFD0000 2030 #define FARX_ACCESS_FLASH_DATA_81XX 0x7F800000 2031 #define FARX_ACCESS_FLASH_CONF_28XX 0x7FFD0000 2032 #define FARX_ACCESS_FLASH_DATA_28XX 0x7F7D0000 2033 2034 /* FCP priority config defines *************************************/ 2035 /* operations */ 2036 #define QLFC_FCP_PRIO_DISABLE 0x0 2037 #define QLFC_FCP_PRIO_ENABLE 0x1 2038 #define QLFC_FCP_PRIO_GET_CONFIG 0x2 2039 #define QLFC_FCP_PRIO_SET_CONFIG 0x3 2040 2041 struct qla_fcp_prio_entry { 2042 uint16_t flags; /* Describes parameter(s) in FCP */ 2043 /* priority entry that are valid */ 2044 #define FCP_PRIO_ENTRY_VALID 0x1 2045 #define FCP_PRIO_ENTRY_TAG_VALID 0x2 2046 #define FCP_PRIO_ENTRY_SPID_VALID 0x4 2047 #define FCP_PRIO_ENTRY_DPID_VALID 0x8 2048 #define FCP_PRIO_ENTRY_LUNB_VALID 0x10 2049 #define FCP_PRIO_ENTRY_LUNE_VALID 0x20 2050 #define FCP_PRIO_ENTRY_SWWN_VALID 0x40 2051 #define FCP_PRIO_ENTRY_DWWN_VALID 0x80 2052 uint8_t tag; /* Priority value */ 2053 uint8_t reserved; /* Reserved for future use */ 2054 uint32_t src_pid; /* Src port id. high order byte */ 2055 /* unused; -1 (wild card) */ 2056 uint32_t dst_pid; /* Src port id. high order byte */ 2057 /* unused; -1 (wild card) */ 2058 uint16_t lun_beg; /* 1st lun num of lun range. */ 2059 /* -1 (wild card) */ 2060 uint16_t lun_end; /* 2nd lun num of lun range. */ 2061 /* -1 (wild card) */ 2062 uint8_t src_wwpn[8]; /* Source WWPN: -1 (wild card) */ 2063 uint8_t dst_wwpn[8]; /* Destination WWPN: -1 (wild card) */ 2064 }; 2065 2066 struct qla_fcp_prio_cfg { 2067 uint8_t signature[4]; /* "HQOS" signature of config data */ 2068 uint16_t version; /* 1: Initial version */ 2069 uint16_t length; /* config data size in num bytes */ 2070 uint16_t checksum; /* config data bytes checksum */ 2071 uint16_t num_entries; /* Number of entries */ 2072 uint16_t size_of_entry; /* Size of each entry in num bytes */ 2073 uint8_t attributes; /* enable/disable, persistence */ 2074 #define FCP_PRIO_ATTR_DISABLE 0x0 2075 #define FCP_PRIO_ATTR_ENABLE 0x1 2076 #define FCP_PRIO_ATTR_PERSIST 0x2 2077 uint8_t reserved; /* Reserved for future use */ 2078 #define FCP_PRIO_CFG_HDR_SIZE 0x10 2079 struct qla_fcp_prio_entry entry[1]; /* fcp priority entries */ 2080 #define FCP_PRIO_CFG_ENTRY_SIZE 0x20 2081 }; 2082 2083 #define FCP_PRIO_CFG_SIZE (32*1024) /* fcp prio data per port*/ 2084 2085 /* 25XX Support ****************************************************/ 2086 #define FA_FCP_PRIO0_ADDR_25 0x3C000 2087 #define FA_FCP_PRIO1_ADDR_25 0x3E000 2088 2089 /* 81XX Flash locations -- occupies second 2MB region. */ 2090 #define FA_BOOT_CODE_ADDR_81 0x80000 2091 #define FA_RISC_CODE_ADDR_81 0xA0000 2092 #define FA_FW_AREA_ADDR_81 0xC0000 2093 #define FA_VPD_NVRAM_ADDR_81 0xD0000 2094 #define FA_VPD0_ADDR_81 0xD0000 2095 #define FA_VPD1_ADDR_81 0xD0400 2096 #define FA_NVRAM0_ADDR_81 0xD0080 2097 #define FA_NVRAM1_ADDR_81 0xD0180 2098 #define FA_FEATURE_ADDR_81 0xD4000 2099 #define FA_FLASH_DESCR_ADDR_81 0xD8000 2100 #define FA_FLASH_LAYOUT_ADDR_81 0xD8400 2101 #define FA_HW_EVENT0_ADDR_81 0xDC000 2102 #define FA_HW_EVENT1_ADDR_81 0xDC400 2103 #define FA_NPIV_CONF0_ADDR_81 0xD1000 2104 #define FA_NPIV_CONF1_ADDR_81 0xD2000 2105 2106 /* 83XX Flash locations -- occupies second 8MB region. */ 2107 #define FA_FLASH_LAYOUT_ADDR_83 (0x3F1000/4) 2108 #define FA_FLASH_LAYOUT_ADDR_28 (0x11000/4) 2109 2110 #define NVRAM_DUAL_FCP_NVME_FLAG_OFFSET 0x196 2111 2112 #endif 2113