xref: /openbmc/linux/drivers/scsi/qla2xxx/qla_fw.h (revision a16be368)
1 /*
2  * QLogic Fibre Channel HBA Driver
3  * Copyright (c)  2003-2014 QLogic Corporation
4  *
5  * See LICENSE.qla2xxx for copyright and licensing details.
6  */
7 #ifndef __QLA_FW_H
8 #define __QLA_FW_H
9 
10 #include <linux/nvme.h>
11 #include <linux/nvme-fc.h>
12 
13 #include "qla_dsd.h"
14 
15 #define MBS_CHECKSUM_ERROR	0x4010
16 #define MBS_INVALID_PRODUCT_KEY	0x4020
17 
18 /*
19  * Firmware Options.
20  */
21 #define FO1_ENABLE_PUREX	BIT_10
22 #define FO1_DISABLE_LED_CTRL	BIT_6
23 #define FO1_ENABLE_8016		BIT_0
24 #define FO2_ENABLE_SEL_CLASS2	BIT_5
25 #define FO3_NO_ABTS_ON_LINKDOWN	BIT_14
26 #define FO3_HOLD_STS_IOCB	BIT_12
27 
28 /*
29  * Port Database structure definition for ISP 24xx.
30  */
31 #define PDO_FORCE_ADISC		BIT_1
32 #define PDO_FORCE_PLOGI		BIT_0
33 
34 struct buffer_credit_24xx {
35 	u32 parameter[28];
36 };
37 
38 #define	PORT_DATABASE_24XX_SIZE		64
39 struct port_database_24xx {
40 	uint16_t flags;
41 #define PDF_TASK_RETRY_ID	BIT_14
42 #define PDF_FC_TAPE		BIT_7
43 #define PDF_ACK0_CAPABLE	BIT_6
44 #define PDF_FCP2_CONF		BIT_5
45 #define PDF_CLASS_2		BIT_4
46 #define PDF_HARD_ADDR		BIT_1
47 
48 	/*
49 	 * for NVMe, the login_state field has been
50 	 * split into nibbles.
51 	 * The lower nibble is for FCP.
52 	 * The upper nibble is for NVMe.
53 	 */
54 	uint8_t current_login_state;
55 	uint8_t last_login_state;
56 #define PDS_PLOGI_PENDING	0x03
57 #define PDS_PLOGI_COMPLETE	0x04
58 #define PDS_PRLI_PENDING	0x05
59 #define PDS_PRLI_COMPLETE	0x06
60 #define PDS_PORT_UNAVAILABLE	0x07
61 #define PDS_PRLO_PENDING	0x09
62 #define PDS_LOGO_PENDING	0x11
63 #define PDS_PRLI2_PENDING	0x12
64 
65 	uint8_t hard_address[3];
66 	uint8_t reserved_1;
67 
68 	uint8_t port_id[3];
69 	uint8_t sequence_id;
70 
71 	uint16_t port_timer;
72 
73 	uint16_t nport_handle;			/* N_PORT handle. */
74 
75 	uint16_t receive_data_size;
76 	uint16_t reserved_2;
77 
78 	uint8_t prli_svc_param_word_0[2];	/* Big endian */
79 						/* Bits 15-0 of word 0 */
80 	uint8_t prli_svc_param_word_3[2];	/* Big endian */
81 						/* Bits 15-0 of word 3 */
82 
83 	uint8_t port_name[WWN_SIZE];
84 	uint8_t node_name[WWN_SIZE];
85 
86 	uint8_t reserved_3[4];
87 	uint16_t prli_nvme_svc_param_word_0;	/* Bits 15-0 of word 0 */
88 	uint16_t prli_nvme_svc_param_word_3;	/* Bits 15-0 of word 3 */
89 	uint16_t nvme_first_burst_size;
90 	uint8_t reserved_4[14];
91 };
92 
93 /*
94  * MB 75h returns a list of DB entries similar to port_database_24xx(64B).
95  * However, in this case it returns 1st 40 bytes.
96  */
97 struct get_name_list_extended {
98 	__le16 flags;
99 	u8 current_login_state;
100 	u8 last_login_state;
101 	u8 hard_address[3];
102 	u8 reserved_1;
103 	u8 port_id[3];
104 	u8 sequence_id;
105 	__le16 port_timer;
106 	__le16 nport_handle;			/* N_PORT handle. */
107 	__le16 receive_data_size;
108 	__le16 reserved_2;
109 
110 	/* PRLI SVC Param are Big endian */
111 	u8 prli_svc_param_word_0[2]; /* Bits 15-0 of word 0 */
112 	u8 prli_svc_param_word_3[2]; /* Bits 15-0 of word 3 */
113 	u8 port_name[WWN_SIZE];
114 	u8 node_name[WWN_SIZE];
115 };
116 
117 /* MB 75h: This is the short version of the database */
118 struct get_name_list {
119 	u8 port_node_name[WWN_SIZE]; /* B7 most sig, B0 least sig */
120 	__le16 nport_handle;
121 	u8 reserved;
122 };
123 
124 struct vp_database_24xx {
125 	uint16_t vp_status;
126 	uint8_t  options;
127 	uint8_t  id;
128 	uint8_t  port_name[WWN_SIZE];
129 	uint8_t  node_name[WWN_SIZE];
130 	uint16_t port_id_low;
131 	uint16_t port_id_high;
132 };
133 
134 struct nvram_24xx {
135 	/* NVRAM header. */
136 	uint8_t id[4];
137 	__le16	nvram_version;
138 	uint16_t reserved_0;
139 
140 	/* Firmware Initialization Control Block. */
141 	__le16	version;
142 	uint16_t reserved_1;
143 	__le16	frame_payload_size;
144 	__le16	execution_throttle;
145 	__le16	exchange_count;
146 	__le16	hard_address;
147 
148 	uint8_t port_name[WWN_SIZE];
149 	uint8_t node_name[WWN_SIZE];
150 
151 	__le16	login_retry_count;
152 	__le16	link_down_on_nos;
153 	__le16	interrupt_delay_timer;
154 	__le16	login_timeout;
155 
156 	__le32	firmware_options_1;
157 	__le32	firmware_options_2;
158 	__le32	firmware_options_3;
159 
160 	/* Offset 56. */
161 
162 	/*
163 	 * BIT 0     = Control Enable
164 	 * BIT 1-15  =
165 	 *
166 	 * BIT 0-7   = Reserved
167 	 * BIT 8-10  = Output Swing 1G
168 	 * BIT 11-13 = Output Emphasis 1G
169 	 * BIT 14-15 = Reserved
170 	 *
171 	 * BIT 0-7   = Reserved
172 	 * BIT 8-10  = Output Swing 2G
173 	 * BIT 11-13 = Output Emphasis 2G
174 	 * BIT 14-15 = Reserved
175 	 *
176 	 * BIT 0-7   = Reserved
177 	 * BIT 8-10  = Output Swing 4G
178 	 * BIT 11-13 = Output Emphasis 4G
179 	 * BIT 14-15 = Reserved
180 	 */
181 	__le16	seriallink_options[4];
182 
183 	uint16_t reserved_2[16];
184 
185 	/* Offset 96. */
186 	uint16_t reserved_3[16];
187 
188 	/* PCIe table entries. */
189 	uint16_t reserved_4[16];
190 
191 	/* Offset 160. */
192 	uint16_t reserved_5[16];
193 
194 	/* Offset 192. */
195 	uint16_t reserved_6[16];
196 
197 	/* Offset 224. */
198 	uint16_t reserved_7[16];
199 
200 	/*
201 	 * BIT 0  = Enable spinup delay
202 	 * BIT 1  = Disable BIOS
203 	 * BIT 2  = Enable Memory Map BIOS
204 	 * BIT 3  = Enable Selectable Boot
205 	 * BIT 4  = Disable RISC code load
206 	 * BIT 5  = Disable Serdes
207 	 * BIT 6  =
208 	 * BIT 7  =
209 	 *
210 	 * BIT 8  =
211 	 * BIT 9  =
212 	 * BIT 10 = Enable lip full login
213 	 * BIT 11 = Enable target reset
214 	 * BIT 12 =
215 	 * BIT 13 =
216 	 * BIT 14 =
217 	 * BIT 15 = Enable alternate WWN
218 	 *
219 	 * BIT 16-31 =
220 	 */
221 	__le32	host_p;
222 
223 	uint8_t alternate_port_name[WWN_SIZE];
224 	uint8_t alternate_node_name[WWN_SIZE];
225 
226 	uint8_t boot_port_name[WWN_SIZE];
227 	__le16	boot_lun_number;
228 	uint16_t reserved_8;
229 
230 	uint8_t alt1_boot_port_name[WWN_SIZE];
231 	__le16	alt1_boot_lun_number;
232 	uint16_t reserved_9;
233 
234 	uint8_t alt2_boot_port_name[WWN_SIZE];
235 	__le16	alt2_boot_lun_number;
236 	uint16_t reserved_10;
237 
238 	uint8_t alt3_boot_port_name[WWN_SIZE];
239 	__le16	alt3_boot_lun_number;
240 	uint16_t reserved_11;
241 
242 	/*
243 	 * BIT 0 = Selective Login
244 	 * BIT 1 = Alt-Boot Enable
245 	 * BIT 2 = Reserved
246 	 * BIT 3 = Boot Order List
247 	 * BIT 4 = Reserved
248 	 * BIT 5 = Selective LUN
249 	 * BIT 6 = Reserved
250 	 * BIT 7-31 =
251 	 */
252 	__le32	efi_parameters;
253 
254 	uint8_t reset_delay;
255 	uint8_t reserved_12;
256 	uint16_t reserved_13;
257 
258 	__le16	boot_id_number;
259 	uint16_t reserved_14;
260 
261 	__le16	max_luns_per_target;
262 	uint16_t reserved_15;
263 
264 	__le16	port_down_retry_count;
265 	__le16	link_down_timeout;
266 
267 	/* FCode parameters. */
268 	__le16	fcode_parameter;
269 
270 	uint16_t reserved_16[3];
271 
272 	/* Offset 352. */
273 	uint8_t prev_drv_ver_major;
274 	uint8_t prev_drv_ver_submajob;
275 	uint8_t prev_drv_ver_minor;
276 	uint8_t prev_drv_ver_subminor;
277 
278 	__le16	prev_bios_ver_major;
279 	__le16	prev_bios_ver_minor;
280 
281 	__le16	prev_efi_ver_major;
282 	__le16	prev_efi_ver_minor;
283 
284 	__le16	prev_fw_ver_major;
285 	uint8_t prev_fw_ver_minor;
286 	uint8_t prev_fw_ver_subminor;
287 
288 	uint16_t reserved_17[8];
289 
290 	/* Offset 384. */
291 	uint16_t reserved_18[16];
292 
293 	/* Offset 416. */
294 	uint16_t reserved_19[16];
295 
296 	/* Offset 448. */
297 	uint16_t reserved_20[16];
298 
299 	/* Offset 480. */
300 	uint8_t model_name[16];
301 
302 	uint16_t reserved_21[2];
303 
304 	/* Offset 500. */
305 	/* HW Parameter Block. */
306 	uint16_t pcie_table_sig;
307 	uint16_t pcie_table_offset;
308 
309 	uint16_t subsystem_vendor_id;
310 	uint16_t subsystem_device_id;
311 
312 	__le32	checksum;
313 };
314 
315 /*
316  * ISP Initialization Control Block.
317  * Little endian except where noted.
318  */
319 #define	ICB_VERSION 1
320 struct init_cb_24xx {
321 	__le16	version;
322 	uint16_t reserved_1;
323 
324 	__le16	frame_payload_size;
325 	__le16	execution_throttle;
326 	__le16	exchange_count;
327 
328 	__le16	hard_address;
329 
330 	uint8_t port_name[WWN_SIZE];		/* Big endian. */
331 	uint8_t node_name[WWN_SIZE];		/* Big endian. */
332 
333 	__le16	response_q_inpointer;
334 	__le16	request_q_outpointer;
335 
336 	__le16	login_retry_count;
337 
338 	__le16	prio_request_q_outpointer;
339 
340 	__le16	response_q_length;
341 	__le16	request_q_length;
342 
343 	__le16	link_down_on_nos;		/* Milliseconds. */
344 
345 	__le16	prio_request_q_length;
346 
347 	__le64	 request_q_address __packed;
348 	__le64	 response_q_address __packed;
349 	__le64	 prio_request_q_address __packed;
350 
351 	__le16	msix;
352 	__le16	msix_atio;
353 	uint8_t reserved_2[4];
354 
355 	__le16	atio_q_inpointer;
356 	__le16	atio_q_length;
357 	__le64	atio_q_address __packed;
358 
359 	__le16	interrupt_delay_timer;		/* 100us increments. */
360 	__le16	login_timeout;
361 
362 	/*
363 	 * BIT 0  = Enable Hard Loop Id
364 	 * BIT 1  = Enable Fairness
365 	 * BIT 2  = Enable Full-Duplex
366 	 * BIT 3  = Reserved
367 	 * BIT 4  = Enable Target Mode
368 	 * BIT 5  = Disable Initiator Mode
369 	 * BIT 6  = Acquire FA-WWN
370 	 * BIT 7  = Enable D-port Diagnostics
371 	 *
372 	 * BIT 8  = Reserved
373 	 * BIT 9  = Non Participating LIP
374 	 * BIT 10 = Descending Loop ID Search
375 	 * BIT 11 = Acquire Loop ID in LIPA
376 	 * BIT 12 = Reserved
377 	 * BIT 13 = Full Login after LIP
378 	 * BIT 14 = Node Name Option
379 	 * BIT 15-31 = Reserved
380 	 */
381 	__le32	firmware_options_1;
382 
383 	/*
384 	 * BIT 0  = Operation Mode bit 0
385 	 * BIT 1  = Operation Mode bit 1
386 	 * BIT 2  = Operation Mode bit 2
387 	 * BIT 3  = Operation Mode bit 3
388 	 * BIT 4  = Connection Options bit 0
389 	 * BIT 5  = Connection Options bit 1
390 	 * BIT 6  = Connection Options bit 2
391 	 * BIT 7  = Enable Non part on LIHA failure
392 	 *
393 	 * BIT 8  = Enable Class 2
394 	 * BIT 9  = Enable ACK0
395 	 * BIT 10 = Reserved
396 	 * BIT 11 = Enable FC-SP Security
397 	 * BIT 12 = FC Tape Enable
398 	 * BIT 13 = Reserved
399 	 * BIT 14 = Enable Target PRLI Control
400 	 * BIT 15-31 = Reserved
401 	 */
402 	__le32	firmware_options_2;
403 
404 	/*
405 	 * BIT 0  = Reserved
406 	 * BIT 1  = Soft ID only
407 	 * BIT 2  = Reserved
408 	 * BIT 3  = Reserved
409 	 * BIT 4  = FCP RSP Payload bit 0
410 	 * BIT 5  = FCP RSP Payload bit 1
411 	 * BIT 6  = Enable Receive Out-of-Order data frame handling
412 	 * BIT 7  = Disable Automatic PLOGI on Local Loop
413 	 *
414 	 * BIT 8  = Reserved
415 	 * BIT 9  = Enable Out-of-Order FCP_XFER_RDY relative offset handling
416 	 * BIT 10 = Reserved
417 	 * BIT 11 = Reserved
418 	 * BIT 12 = Reserved
419 	 * BIT 13 = Data Rate bit 0
420 	 * BIT 14 = Data Rate bit 1
421 	 * BIT 15 = Data Rate bit 2
422 	 * BIT 16 = Enable 75 ohm Termination Select
423 	 * BIT 17-28 = Reserved
424 	 * BIT 29 = Enable response queue 0 in index shadowing
425 	 * BIT 30 = Enable request queue 0 out index shadowing
426 	 * BIT 31 = Reserved
427 	 */
428 	__le32	firmware_options_3;
429 	__le16	 qos;
430 	__le16	 rid;
431 	uint8_t  reserved_3[20];
432 };
433 
434 /*
435  * ISP queue - command entry structure definition.
436  */
437 #define COMMAND_BIDIRECTIONAL 0x75
438 struct cmd_bidir {
439 	uint8_t entry_type;		/* Entry type. */
440 	uint8_t entry_count;		/* Entry count. */
441 	uint8_t sys_define;		/* System defined */
442 	uint8_t entry_status;		/* Entry status. */
443 
444 	uint32_t handle;		/* System handle. */
445 
446 	__le16	nport_handle;		/* N_PORT handle. */
447 
448 	__le16	timeout;		/* Command timeout. */
449 
450 	__le16	wr_dseg_count;		/* Write Data segment count. */
451 	__le16	rd_dseg_count;		/* Read Data segment count. */
452 
453 	struct scsi_lun lun;		/* FCP LUN (BE). */
454 
455 	__le16	control_flags;		/* Control flags. */
456 #define BD_WRAP_BACK			BIT_3
457 #define BD_READ_DATA			BIT_1
458 #define BD_WRITE_DATA			BIT_0
459 
460 	__le16	fcp_cmnd_dseg_len;		/* Data segment length. */
461 	__le64	 fcp_cmnd_dseg_address __packed;/* Data segment address. */
462 
463 	uint16_t reserved[2];			/* Reserved */
464 
465 	__le32	rd_byte_count;			/* Total Byte count Read. */
466 	__le32	wr_byte_count;			/* Total Byte count write. */
467 
468 	uint8_t port_id[3];			/* PortID of destination port.*/
469 	uint8_t vp_index;
470 
471 	struct dsd64 fcp_dsd;
472 };
473 
474 #define COMMAND_TYPE_6	0x48		/* Command Type 6 entry */
475 struct cmd_type_6 {
476 	uint8_t entry_type;		/* Entry type. */
477 	uint8_t entry_count;		/* Entry count. */
478 	uint8_t sys_define;		/* System defined. */
479 	uint8_t entry_status;		/* Entry Status. */
480 
481 	uint32_t handle;		/* System handle. */
482 
483 	__le16	nport_handle;		/* N_PORT handle. */
484 	__le16	timeout;		/* Command timeout. */
485 
486 	__le16	dseg_count;		/* Data segment count. */
487 
488 	__le16	fcp_rsp_dsd_len;	/* FCP_RSP DSD length. */
489 
490 	struct scsi_lun lun;		/* FCP LUN (BE). */
491 
492 	__le16	control_flags;		/* Control flags. */
493 #define CF_DIF_SEG_DESCR_ENABLE		BIT_3
494 #define CF_DATA_SEG_DESCR_ENABLE	BIT_2
495 #define CF_READ_DATA			BIT_1
496 #define CF_WRITE_DATA			BIT_0
497 
498 	__le16	fcp_cmnd_dseg_len;	/* Data segment length. */
499 					/* Data segment address. */
500 	__le64	 fcp_cmnd_dseg_address __packed;
501 					/* Data segment address. */
502 	__le64	 fcp_rsp_dseg_address __packed;
503 
504 	__le32	byte_count;		/* Total byte count. */
505 
506 	uint8_t port_id[3];		/* PortID of destination port. */
507 	uint8_t vp_index;
508 
509 	struct dsd64 fcp_dsd;
510 };
511 
512 #define COMMAND_TYPE_7	0x18		/* Command Type 7 entry */
513 struct cmd_type_7 {
514 	uint8_t entry_type;		/* Entry type. */
515 	uint8_t entry_count;		/* Entry count. */
516 	uint8_t sys_define;		/* System defined. */
517 	uint8_t entry_status;		/* Entry Status. */
518 
519 	uint32_t handle;		/* System handle. */
520 
521 	__le16	nport_handle;		/* N_PORT handle. */
522 	__le16	timeout;		/* Command timeout. */
523 #define FW_MAX_TIMEOUT		0x1999
524 
525 	__le16	dseg_count;		/* Data segment count. */
526 	uint16_t reserved_1;
527 
528 	struct scsi_lun lun;		/* FCP LUN (BE). */
529 
530 	__le16	task_mgmt_flags;	/* Task management flags. */
531 #define TMF_CLEAR_ACA		BIT_14
532 #define TMF_TARGET_RESET	BIT_13
533 #define TMF_LUN_RESET		BIT_12
534 #define TMF_CLEAR_TASK_SET	BIT_10
535 #define TMF_ABORT_TASK_SET	BIT_9
536 #define TMF_DSD_LIST_ENABLE	BIT_2
537 #define TMF_READ_DATA		BIT_1
538 #define TMF_WRITE_DATA		BIT_0
539 
540 	uint8_t task;
541 #define TSK_SIMPLE		0
542 #define TSK_HEAD_OF_QUEUE	1
543 #define TSK_ORDERED		2
544 #define TSK_ACA			4
545 #define TSK_UNTAGGED		5
546 
547 	uint8_t crn;
548 
549 	uint8_t fcp_cdb[MAX_CMDSZ]; 	/* SCSI command words. */
550 	__le32	byte_count;		/* Total byte count. */
551 
552 	uint8_t port_id[3];		/* PortID of destination port. */
553 	uint8_t vp_index;
554 
555 	struct dsd64 dsd;
556 };
557 
558 #define COMMAND_TYPE_CRC_2	0x6A	/* Command Type CRC_2 (Type 6)
559 					 * (T10-DIF) */
560 struct cmd_type_crc_2 {
561 	uint8_t entry_type;		/* Entry type. */
562 	uint8_t entry_count;		/* Entry count. */
563 	uint8_t sys_define;		/* System defined. */
564 	uint8_t entry_status;		/* Entry Status. */
565 
566 	uint32_t handle;		/* System handle. */
567 
568 	__le16	nport_handle;		/* N_PORT handle. */
569 	__le16	timeout;		/* Command timeout. */
570 
571 	__le16	dseg_count;		/* Data segment count. */
572 
573 	__le16	fcp_rsp_dseg_len;	/* FCP_RSP DSD length. */
574 
575 	struct scsi_lun lun;		/* FCP LUN (BE). */
576 
577 	__le16	control_flags;		/* Control flags. */
578 
579 	__le16	fcp_cmnd_dseg_len;	/* Data segment length. */
580 	__le64	 fcp_cmnd_dseg_address __packed;
581 					/* Data segment address. */
582 	__le64	 fcp_rsp_dseg_address __packed;
583 
584 	__le32	byte_count;		/* Total byte count. */
585 
586 	uint8_t port_id[3];		/* PortID of destination port. */
587 	uint8_t vp_index;
588 
589 	__le64	 crc_context_address __packed;	/* Data segment address. */
590 	__le16	crc_context_len;		/* Data segment length. */
591 	uint16_t reserved_1;			/* MUST be set to 0. */
592 };
593 
594 
595 /*
596  * ISP queue - status entry structure definition.
597  */
598 #define	STATUS_TYPE	0x03		/* Status entry. */
599 struct sts_entry_24xx {
600 	uint8_t entry_type;		/* Entry type. */
601 	uint8_t entry_count;		/* Entry count. */
602 	uint8_t sys_define;		/* System defined. */
603 	uint8_t entry_status;		/* Entry Status. */
604 
605 	uint32_t handle;		/* System handle. */
606 
607 	__le16	comp_status;		/* Completion status. */
608 	__le16	ox_id;			/* OX_ID used by the firmware. */
609 
610 	__le32	residual_len;		/* FW calc residual transfer length. */
611 
612 	union {
613 		uint16_t reserved_1;
614 		__le16	nvme_rsp_pyld_len;
615 	};
616 
617 	__le16	state_flags;		/* State flags. */
618 #define SF_TRANSFERRED_DATA	BIT_11
619 #define SF_NVME_ERSP            BIT_6
620 #define SF_FCP_RSP_DMA		BIT_0
621 
622 	__le16	retry_delay;
623 	__le16	scsi_status;		/* SCSI status. */
624 #define SS_CONFIRMATION_REQ		BIT_12
625 
626 	__le32	rsp_residual_count;	/* FCP RSP residual count. */
627 
628 	__le32	sense_len;		/* FCP SENSE length. */
629 
630 	union {
631 		struct {
632 			__le32	rsp_data_len;	/* FCP response data length  */
633 			uint8_t data[28];	/* FCP rsp/sense information */
634 		};
635 		struct nvme_fc_ersp_iu nvme_ersp;
636 		uint8_t nvme_ersp_data[32];
637 	};
638 
639 	/*
640 	 * If DIF Error is set in comp_status, these additional fields are
641 	 * defined:
642 	 *
643 	 * !!! NOTE: Firmware sends expected/actual DIF data in big endian
644 	 * format; but all of the "data" field gets swab32-d in the beginning
645 	 * of qla2x00_status_entry().
646 	 *
647 	 * &data[10] : uint8_t report_runt_bg[2];	- computed guard
648 	 * &data[12] : uint8_t actual_dif[8];		- DIF Data received
649 	 * &data[20] : uint8_t expected_dif[8];		- DIF Data computed
650 	*/
651 };
652 
653 
654 /*
655  * Status entry completion status
656  */
657 #define CS_DATA_REASSEMBLY_ERROR 0x11	/* Data Reassembly Error.. */
658 #define CS_ABTS_BY_TARGET	0x13	/* Target send ABTS to abort IOCB. */
659 #define CS_FW_RESOURCE		0x2C	/* Firmware Resource Unavailable. */
660 #define CS_TASK_MGMT_OVERRUN	0x30	/* Task management overrun (8+). */
661 #define CS_ABORT_BY_TARGET	0x47	/* Abort By Target. */
662 
663 /*
664  * ISP queue - marker entry structure definition.
665  */
666 #define MARKER_TYPE	0x04		/* Marker entry. */
667 struct mrk_entry_24xx {
668 	uint8_t entry_type;		/* Entry type. */
669 	uint8_t entry_count;		/* Entry count. */
670 	uint8_t handle_count;		/* Handle count. */
671 	uint8_t entry_status;		/* Entry Status. */
672 
673 	uint32_t handle;		/* System handle. */
674 
675 	__le16	nport_handle;		/* N_PORT handle. */
676 
677 	uint8_t modifier;		/* Modifier (7-0). */
678 #define MK_SYNC_ID_LUN	0		/* Synchronize ID/LUN */
679 #define MK_SYNC_ID	1		/* Synchronize ID */
680 #define MK_SYNC_ALL	2		/* Synchronize all ID/LUN */
681 	uint8_t reserved_1;
682 
683 	uint8_t reserved_2;
684 	uint8_t vp_index;
685 
686 	uint16_t reserved_3;
687 
688 	uint8_t lun[8];			/* FCP LUN (BE). */
689 	uint8_t reserved_4[40];
690 };
691 
692 /*
693  * ISP queue - CT Pass-Through entry structure definition.
694  */
695 #define CT_IOCB_TYPE		0x29	/* CT Pass-Through IOCB entry */
696 struct ct_entry_24xx {
697 	uint8_t entry_type;		/* Entry type. */
698 	uint8_t entry_count;		/* Entry count. */
699 	uint8_t sys_define;		/* System Defined. */
700 	uint8_t entry_status;		/* Entry Status. */
701 
702 	uint32_t handle;		/* System handle. */
703 
704 	__le16	comp_status;		/* Completion status. */
705 
706 	__le16	nport_handle;		/* N_PORT handle. */
707 
708 	__le16	cmd_dsd_count;
709 
710 	uint8_t vp_index;
711 	uint8_t reserved_1;
712 
713 	__le16	timeout;		/* Command timeout. */
714 	uint16_t reserved_2;
715 
716 	__le16	rsp_dsd_count;
717 
718 	uint8_t reserved_3[10];
719 
720 	__le32	rsp_byte_count;
721 	__le32	cmd_byte_count;
722 
723 	struct dsd64 dsd[2];
724 };
725 
726 /*
727  * ISP queue - PUREX IOCB entry structure definition
728  */
729 #define PUREX_IOCB_TYPE		0x51	/* CT Pass Through IOCB entry */
730 struct purex_entry_24xx {
731 	uint8_t entry_type;		/* Entry type. */
732 	uint8_t entry_count;		/* Entry count. */
733 	uint8_t sys_define;		/* System defined. */
734 	uint8_t entry_status;		/* Entry Status. */
735 
736 	__le16	reserved1;
737 	uint8_t vp_idx;
738 	uint8_t reserved2;
739 
740 	__le16	status_flags;
741 	__le16	nport_handle;
742 
743 	__le16	frame_size;
744 	__le16	trunc_frame_size;
745 
746 	__le32	rx_xchg_addr;
747 
748 	uint8_t d_id[3];
749 	uint8_t r_ctl;
750 
751 	uint8_t s_id[3];
752 	uint8_t cs_ctl;
753 
754 	uint8_t f_ctl[3];
755 	uint8_t type;
756 
757 	__le16	seq_cnt;
758 	uint8_t df_ctl;
759 	uint8_t seq_id;
760 
761 	__le16	rx_id;
762 	__le16	ox_id;
763 	__le32	param;
764 
765 	uint8_t els_frame_payload[20];
766 };
767 
768 /*
769  * ISP queue - ELS Pass-Through entry structure definition.
770  */
771 #define ELS_IOCB_TYPE		0x53	/* ELS Pass-Through IOCB entry */
772 struct els_entry_24xx {
773 	uint8_t entry_type;		/* Entry type. */
774 	uint8_t entry_count;		/* Entry count. */
775 	uint8_t sys_define;		/* System Defined. */
776 	uint8_t entry_status;		/* Entry Status. */
777 
778 	uint32_t handle;		/* System handle. */
779 
780 	__le16	comp_status;		/* response only */
781 	__le16	nport_handle;
782 
783 	__le16	tx_dsd_count;
784 
785 	uint8_t vp_index;
786 	uint8_t sof_type;
787 #define EST_SOFI3		(1 << 4)
788 #define EST_SOFI2		(3 << 4)
789 
790 	__le32	rx_xchg_address;	/* Receive exchange address. */
791 	__le16	rx_dsd_count;
792 
793 	uint8_t opcode;
794 	uint8_t reserved_2;
795 
796 	uint8_t d_id[3];
797 	uint8_t s_id[3];
798 
799 	__le16	control_flags;		/* Control flags. */
800 #define ECF_PAYLOAD_DESCR_MASK	(BIT_15|BIT_14|BIT_13)
801 #define EPD_ELS_COMMAND		(0 << 13)
802 #define EPD_ELS_ACC		(1 << 13)
803 #define EPD_ELS_RJT		(2 << 13)
804 #define EPD_RX_XCHG		(3 << 13)
805 #define ECF_CLR_PASSTHRU_PEND	BIT_12
806 #define ECF_INCL_FRAME_HDR	BIT_11
807 
808 	union {
809 		struct {
810 			__le32	 rx_byte_count;
811 			__le32	 tx_byte_count;
812 
813 			__le64	 tx_address __packed;	/* DSD 0 address. */
814 			__le32	 tx_len;		/* DSD 0 length. */
815 
816 			__le64	 rx_address __packed;	/* DSD 1 address. */
817 			__le32	 rx_len;		/* DSD 1 length. */
818 		};
819 		struct {
820 			__le32	total_byte_count;
821 			__le32	error_subcode_1;
822 			__le32	error_subcode_2;
823 			__le32	error_subcode_3;
824 		};
825 	};
826 };
827 
828 struct els_sts_entry_24xx {
829 	uint8_t entry_type;		/* Entry type. */
830 	uint8_t entry_count;		/* Entry count. */
831 	uint8_t sys_define;		/* System Defined. */
832 	uint8_t entry_status;		/* Entry Status. */
833 
834 	__le32	handle;		/* System handle. */
835 
836 	__le16	comp_status;
837 
838 	__le16	nport_handle;		/* N_PORT handle. */
839 
840 	__le16	reserved_1;
841 
842 	uint8_t vp_index;
843 	uint8_t sof_type;
844 
845 	__le32	rx_xchg_address;	/* Receive exchange address. */
846 	__le16	reserved_2;
847 
848 	uint8_t opcode;
849 	uint8_t reserved_3;
850 
851 	uint8_t d_id[3];
852 	uint8_t s_id[3];
853 
854 	__le16	control_flags;		/* Control flags. */
855 	__le32	total_byte_count;
856 	__le32	error_subcode_1;
857 	__le32	error_subcode_2;
858 	__le32	error_subcode_3;
859 
860 	__le32	reserved_4[4];
861 };
862 /*
863  * ISP queue - Mailbox Command entry structure definition.
864  */
865 #define MBX_IOCB_TYPE	0x39
866 struct mbx_entry_24xx {
867 	uint8_t entry_type;		/* Entry type. */
868 	uint8_t entry_count;		/* Entry count. */
869 	uint8_t handle_count;		/* Handle count. */
870 	uint8_t entry_status;		/* Entry Status. */
871 
872 	uint32_t handle;		/* System handle. */
873 
874 	uint16_t mbx[28];
875 };
876 
877 
878 #define LOGINOUT_PORT_IOCB_TYPE	0x52	/* Login/Logout Port entry. */
879 struct logio_entry_24xx {
880 	uint8_t entry_type;		/* Entry type. */
881 	uint8_t entry_count;		/* Entry count. */
882 	uint8_t sys_define;		/* System defined. */
883 	uint8_t entry_status;		/* Entry Status. */
884 
885 	uint32_t handle;		/* System handle. */
886 
887 	__le16	comp_status;		/* Completion status. */
888 #define CS_LOGIO_ERROR		0x31	/* Login/Logout IOCB error. */
889 
890 	__le16	nport_handle;		/* N_PORT handle. */
891 
892 	__le16	control_flags;		/* Control flags. */
893 					/* Modifiers. */
894 #define LCF_INCLUDE_SNS		BIT_10	/* Include SNS (FFFFFC) during LOGO. */
895 #define LCF_FCP2_OVERRIDE	BIT_9	/* Set/Reset word 3 of PRLI. */
896 #define LCF_CLASS_2		BIT_8	/* Enable class 2 during PLOGI. */
897 #define LCF_FREE_NPORT		BIT_7	/* Release NPORT handle after LOGO. */
898 #define LCF_EXPL_LOGO		BIT_6	/* Perform an explicit LOGO. */
899 #define LCF_NVME_PRLI		BIT_6   /* Perform NVME FC4 PRLI */
900 #define LCF_SKIP_PRLI		BIT_5	/* Skip PRLI after PLOGI. */
901 #define LCF_IMPL_LOGO_ALL	BIT_5	/* Implicit LOGO to all ports. */
902 #define LCF_COND_PLOGI		BIT_4	/* PLOGI only if not logged-in. */
903 #define LCF_IMPL_LOGO		BIT_4	/* Perform an implicit LOGO. */
904 #define LCF_IMPL_PRLO		BIT_4	/* Perform an implicit PRLO. */
905 					/* Commands. */
906 #define LCF_COMMAND_PLOGI	0x00	/* PLOGI. */
907 #define LCF_COMMAND_PRLI	0x01	/* PRLI. */
908 #define LCF_COMMAND_PDISC	0x02	/* PDISC. */
909 #define LCF_COMMAND_ADISC	0x03	/* ADISC. */
910 #define LCF_COMMAND_LOGO	0x08	/* LOGO. */
911 #define LCF_COMMAND_PRLO	0x09	/* PRLO. */
912 #define LCF_COMMAND_TPRLO	0x0A	/* TPRLO. */
913 
914 	uint8_t vp_index;
915 	uint8_t reserved_1;
916 
917 	uint8_t port_id[3];		/* PortID of destination port. */
918 
919 	uint8_t rsp_size;		/* Response size in 32bit words. */
920 
921 	__le32	io_parameter[11];	/* General I/O parameters. */
922 #define LSC_SCODE_NOLINK	0x01
923 #define LSC_SCODE_NOIOCB	0x02
924 #define LSC_SCODE_NOXCB		0x03
925 #define LSC_SCODE_CMD_FAILED	0x04
926 #define LSC_SCODE_NOFABRIC	0x05
927 #define LSC_SCODE_FW_NOT_READY	0x07
928 #define LSC_SCODE_NOT_LOGGED_IN	0x09
929 #define LSC_SCODE_NOPCB		0x0A
930 
931 #define LSC_SCODE_ELS_REJECT	0x18
932 #define LSC_SCODE_CMD_PARAM_ERR	0x19
933 #define LSC_SCODE_PORTID_USED	0x1A
934 #define LSC_SCODE_NPORT_USED	0x1B
935 #define LSC_SCODE_NONPORT	0x1C
936 #define LSC_SCODE_LOGGED_IN	0x1D
937 #define LSC_SCODE_NOFLOGI_ACC	0x1F
938 };
939 
940 #define TSK_MGMT_IOCB_TYPE	0x14
941 struct tsk_mgmt_entry {
942 	uint8_t entry_type;		/* Entry type. */
943 	uint8_t entry_count;		/* Entry count. */
944 	uint8_t handle_count;		/* Handle count. */
945 	uint8_t entry_status;		/* Entry Status. */
946 
947 	uint32_t handle;		/* System handle. */
948 
949 	__le16	nport_handle;		/* N_PORT handle. */
950 
951 	uint16_t reserved_1;
952 
953 	__le16	delay;			/* Activity delay in seconds. */
954 
955 	__le16	timeout;		/* Command timeout. */
956 
957 	struct scsi_lun lun;		/* FCP LUN (BE). */
958 
959 	__le32	control_flags;		/* Control Flags. */
960 #define TCF_NOTMCMD_TO_TARGET	BIT_31
961 #define TCF_LUN_RESET		BIT_4
962 #define TCF_ABORT_TASK_SET	BIT_3
963 #define TCF_CLEAR_TASK_SET	BIT_2
964 #define TCF_TARGET_RESET	BIT_1
965 #define TCF_CLEAR_ACA		BIT_0
966 
967 	uint8_t reserved_2[20];
968 
969 	uint8_t port_id[3];		/* PortID of destination port. */
970 	uint8_t vp_index;
971 
972 	uint8_t reserved_3[12];
973 };
974 
975 #define ABORT_IOCB_TYPE	0x33
976 struct abort_entry_24xx {
977 	uint8_t entry_type;		/* Entry type. */
978 	uint8_t entry_count;		/* Entry count. */
979 	uint8_t handle_count;		/* Handle count. */
980 	uint8_t entry_status;		/* Entry Status. */
981 
982 	uint32_t handle;		/* System handle. */
983 
984 	__le16	nport_handle;		/* N_PORT handle. */
985 					/* or Completion status. */
986 
987 	__le16	options;		/* Options. */
988 #define AOF_NO_ABTS		BIT_0	/* Do not send any ABTS. */
989 
990 	uint32_t handle_to_abort;	/* System handle to abort. */
991 
992 	__le16	req_que_no;
993 	uint8_t reserved_1[30];
994 
995 	uint8_t port_id[3];		/* PortID of destination port. */
996 	uint8_t vp_index;
997 
998 	uint8_t reserved_2[12];
999 };
1000 
1001 #define ABTS_RCV_TYPE		0x54
1002 #define ABTS_RSP_TYPE		0x55
1003 struct abts_entry_24xx {
1004 	uint8_t entry_type;
1005 	uint8_t entry_count;
1006 	uint8_t handle_count;
1007 	uint8_t entry_status;
1008 
1009 	__le32	handle;		/* type 0x55 only */
1010 
1011 	__le16	comp_status;		/* type 0x55 only */
1012 	__le16	nport_handle;		/* type 0x54 only */
1013 
1014 	__le16	control_flags;		/* type 0x55 only */
1015 	uint8_t vp_idx;
1016 	uint8_t sof_type;		/* sof_type is upper nibble */
1017 
1018 	__le32	rx_xch_addr;
1019 
1020 	uint8_t d_id[3];
1021 	uint8_t r_ctl;
1022 
1023 	uint8_t s_id[3];
1024 	uint8_t cs_ctl;
1025 
1026 	uint8_t f_ctl[3];
1027 	uint8_t type;
1028 
1029 	__le16	seq_cnt;
1030 	uint8_t df_ctl;
1031 	uint8_t seq_id;
1032 
1033 	__le16	rx_id;
1034 	__le16	ox_id;
1035 
1036 	__le32	param;
1037 
1038 	union {
1039 		struct {
1040 			__le32	subcode3;
1041 			__le32	rsvd;
1042 			__le32	subcode1;
1043 			__le32	subcode2;
1044 		} error;
1045 		struct {
1046 			__le16	rsrvd1;
1047 			uint8_t last_seq_id;
1048 			uint8_t seq_id_valid;
1049 			__le16	aborted_rx_id;
1050 			__le16	aborted_ox_id;
1051 			__le16	high_seq_cnt;
1052 			__le16	low_seq_cnt;
1053 		} ba_acc;
1054 		struct {
1055 			uint8_t vendor_unique;
1056 			uint8_t explanation;
1057 			uint8_t reason;
1058 		} ba_rjt;
1059 	} payload;
1060 
1061 	__le32	rx_xch_addr_to_abort;
1062 } __packed;
1063 
1064 /* ABTS payload explanation values */
1065 #define BA_RJT_EXP_NO_ADDITIONAL	0
1066 #define BA_RJT_EXP_INV_OX_RX_ID		3
1067 #define BA_RJT_EXP_SEQ_ABORTED		5
1068 
1069 /* ABTS payload reason values */
1070 #define BA_RJT_RSN_INV_CMD_CODE		1
1071 #define BA_RJT_RSN_LOGICAL_ERROR	3
1072 #define BA_RJT_RSN_LOGICAL_BUSY		5
1073 #define BA_RJT_RSN_PROTOCOL_ERROR	7
1074 #define BA_RJT_RSN_UNABLE_TO_PERFORM	9
1075 #define BA_RJT_RSN_VENDOR_SPECIFIC	0xff
1076 
1077 /* FC_F values */
1078 #define FC_TYPE_BLD		0x000		/* Basic link data */
1079 #define FC_F_CTL_RSP_CNTXT	0x800000	/* Responder of exchange */
1080 #define FC_F_CTL_LAST_SEQ	0x100000	/* Last sequence */
1081 #define FC_F_CTL_END_SEQ	0x80000		/* Last sequence */
1082 #define FC_F_CTL_SEQ_INIT	0x010000	/* Sequence initiative */
1083 #define FC_ROUTING_BLD		0x80		/* Basic link data frame */
1084 #define FC_R_CTL_BLD_BA_ACC	0x04		/* BA_ACC (basic accept) */
1085 
1086 /*
1087  * ISP I/O Register Set structure definitions.
1088  */
1089 struct device_reg_24xx {
1090 	__le32	flash_addr;		/* Flash/NVRAM BIOS address. */
1091 #define FARX_DATA_FLAG	BIT_31
1092 #define FARX_ACCESS_FLASH_CONF	0x7FFD0000
1093 #define FARX_ACCESS_FLASH_DATA	0x7FF00000
1094 #define FARX_ACCESS_NVRAM_CONF	0x7FFF0000
1095 #define FARX_ACCESS_NVRAM_DATA	0x7FFE0000
1096 
1097 #define FA_NVRAM_FUNC0_ADDR	0x80
1098 #define FA_NVRAM_FUNC1_ADDR	0x180
1099 
1100 #define FA_NVRAM_VPD_SIZE	0x200
1101 #define FA_NVRAM_VPD0_ADDR	0x00
1102 #define FA_NVRAM_VPD1_ADDR	0x100
1103 
1104 #define FA_BOOT_CODE_ADDR	0x00000
1105 					/*
1106 					 * RISC code begins at offset 512KB
1107 					 * within flash. Consisting of two
1108 					 * contiguous RISC code segments.
1109 					 */
1110 #define FA_RISC_CODE_ADDR	0x20000
1111 #define FA_RISC_CODE_SEGMENTS	2
1112 
1113 #define FA_FLASH_DESCR_ADDR_24	0x11000
1114 #define FA_FLASH_LAYOUT_ADDR_24	0x11400
1115 #define FA_NPIV_CONF0_ADDR_24	0x16000
1116 #define FA_NPIV_CONF1_ADDR_24	0x17000
1117 
1118 #define FA_FW_AREA_ADDR		0x40000
1119 #define FA_VPD_NVRAM_ADDR	0x48000
1120 #define FA_FEATURE_ADDR		0x4C000
1121 #define FA_FLASH_DESCR_ADDR	0x50000
1122 #define FA_FLASH_LAYOUT_ADDR	0x50400
1123 #define FA_HW_EVENT0_ADDR	0x54000
1124 #define FA_HW_EVENT1_ADDR	0x54400
1125 #define FA_HW_EVENT_SIZE	0x200
1126 #define FA_HW_EVENT_ENTRY_SIZE	4
1127 #define FA_NPIV_CONF0_ADDR	0x5C000
1128 #define FA_NPIV_CONF1_ADDR	0x5D000
1129 #define FA_FCP_PRIO0_ADDR	0x10000
1130 #define FA_FCP_PRIO1_ADDR	0x12000
1131 
1132 /*
1133  * Flash Error Log Event Codes.
1134  */
1135 #define HW_EVENT_RESET_ERR	0xF00B
1136 #define HW_EVENT_ISP_ERR	0xF020
1137 #define HW_EVENT_PARITY_ERR	0xF022
1138 #define HW_EVENT_NVRAM_CHKSUM_ERR	0xF023
1139 #define HW_EVENT_FLASH_FW_ERR	0xF024
1140 
1141 	__le32	flash_data;		/* Flash/NVRAM BIOS data. */
1142 
1143 	__le32	ctrl_status;		/* Control/Status. */
1144 #define CSRX_FLASH_ACCESS_ERROR	BIT_18	/* Flash/NVRAM Access Error. */
1145 #define CSRX_DMA_ACTIVE		BIT_17	/* DMA Active status. */
1146 #define CSRX_DMA_SHUTDOWN	BIT_16	/* DMA Shutdown control status. */
1147 #define CSRX_FUNCTION		BIT_15	/* Function number. */
1148 					/* PCI-X Bus Mode. */
1149 #define CSRX_PCIX_BUS_MODE_MASK	(BIT_11|BIT_10|BIT_9|BIT_8)
1150 #define PBM_PCI_33MHZ		(0 << 8)
1151 #define PBM_PCIX_M1_66MHZ	(1 << 8)
1152 #define PBM_PCIX_M1_100MHZ	(2 << 8)
1153 #define PBM_PCIX_M1_133MHZ	(3 << 8)
1154 #define PBM_PCIX_M2_66MHZ	(5 << 8)
1155 #define PBM_PCIX_M2_100MHZ	(6 << 8)
1156 #define PBM_PCIX_M2_133MHZ	(7 << 8)
1157 #define PBM_PCI_66MHZ		(8 << 8)
1158 					/* Max Write Burst byte count. */
1159 #define CSRX_MAX_WRT_BURST_MASK	(BIT_5|BIT_4)
1160 #define MWB_512_BYTES		(0 << 4)
1161 #define MWB_1024_BYTES		(1 << 4)
1162 #define MWB_2048_BYTES		(2 << 4)
1163 #define MWB_4096_BYTES		(3 << 4)
1164 
1165 #define CSRX_64BIT_SLOT		BIT_2	/* PCI 64-Bit Bus Slot. */
1166 #define CSRX_FLASH_ENABLE	BIT_1	/* Flash BIOS Read/Write enable. */
1167 #define CSRX_ISP_SOFT_RESET	BIT_0	/* ISP soft reset. */
1168 
1169 	__le32	ictrl;			/* Interrupt control. */
1170 #define ICRX_EN_RISC_INT	BIT_3	/* Enable RISC interrupts on PCI. */
1171 
1172 	__le32	istatus;		/* Interrupt status. */
1173 #define ISRX_RISC_INT		BIT_3	/* RISC interrupt. */
1174 
1175 	__le32	unused_1[2];		/* Gap. */
1176 
1177 					/* Request Queue. */
1178 	__le32	req_q_in;		/*  In-Pointer. */
1179 	__le32	req_q_out;		/*  Out-Pointer. */
1180 					/* Response Queue. */
1181 	__le32	rsp_q_in;		/*  In-Pointer. */
1182 	__le32	rsp_q_out;		/*  Out-Pointer. */
1183 					/* Priority Request Queue. */
1184 	__le32	preq_q_in;		/*  In-Pointer. */
1185 	__le32	preq_q_out;		/*  Out-Pointer. */
1186 
1187 	__le32	unused_2[2];		/* Gap. */
1188 
1189 					/* ATIO Queue. */
1190 	__le32	atio_q_in;		/*  In-Pointer. */
1191 	__le32	atio_q_out;		/*  Out-Pointer. */
1192 
1193 	__le32	host_status;
1194 #define HSRX_RISC_INT		BIT_15	/* RISC to Host interrupt. */
1195 #define HSRX_RISC_PAUSED	BIT_8	/* RISC Paused. */
1196 
1197 	__le32	hccr;			/* Host command & control register. */
1198 					/* HCCR statuses. */
1199 #define HCCRX_HOST_INT		BIT_6	/* Host to RISC interrupt bit. */
1200 #define HCCRX_RISC_RESET	BIT_5	/* RISC Reset mode bit. */
1201 					/* HCCR commands. */
1202 					/* NOOP. */
1203 #define HCCRX_NOOP		0x00000000
1204 					/* Set RISC Reset. */
1205 #define HCCRX_SET_RISC_RESET	0x10000000
1206 					/* Clear RISC Reset. */
1207 #define HCCRX_CLR_RISC_RESET	0x20000000
1208 					/* Set RISC Pause. */
1209 #define HCCRX_SET_RISC_PAUSE	0x30000000
1210 					/* Releases RISC Pause. */
1211 #define HCCRX_REL_RISC_PAUSE	0x40000000
1212 					/* Set HOST to RISC interrupt. */
1213 #define HCCRX_SET_HOST_INT	0x50000000
1214 					/* Clear HOST to RISC interrupt. */
1215 #define HCCRX_CLR_HOST_INT	0x60000000
1216 					/* Clear RISC to PCI interrupt. */
1217 #define HCCRX_CLR_RISC_INT	0xA0000000
1218 
1219 	__le32	gpiod;			/* GPIO Data register. */
1220 
1221 					/* LED update mask. */
1222 #define GPDX_LED_UPDATE_MASK	(BIT_20|BIT_19|BIT_18)
1223 					/* Data update mask. */
1224 #define GPDX_DATA_UPDATE_MASK	(BIT_17|BIT_16)
1225 					/* Data update mask. */
1226 #define GPDX_DATA_UPDATE_2_MASK	(BIT_28|BIT_27|BIT_26|BIT_17|BIT_16)
1227 					/* LED control mask. */
1228 #define GPDX_LED_COLOR_MASK	(BIT_4|BIT_3|BIT_2)
1229 					/* LED bit values. Color names as
1230 					 * referenced in fw spec.
1231 					 */
1232 #define GPDX_LED_YELLOW_ON	BIT_2
1233 #define GPDX_LED_GREEN_ON	BIT_3
1234 #define GPDX_LED_AMBER_ON	BIT_4
1235 					/* Data in/out. */
1236 #define GPDX_DATA_INOUT		(BIT_1|BIT_0)
1237 
1238 	__le32	gpioe;			/* GPIO Enable register. */
1239 					/* Enable update mask. */
1240 #define GPEX_ENABLE_UPDATE_MASK	(BIT_17|BIT_16)
1241 					/* Enable update mask. */
1242 #define GPEX_ENABLE_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16)
1243 					/* Enable. */
1244 #define GPEX_ENABLE		(BIT_1|BIT_0)
1245 
1246 	__le32	iobase_addr;		/* I/O Bus Base Address register. */
1247 
1248 	__le32	unused_3[10];		/* Gap. */
1249 
1250 	__le16	mailbox0;
1251 	__le16	mailbox1;
1252 	__le16	mailbox2;
1253 	__le16	mailbox3;
1254 	__le16	mailbox4;
1255 	__le16	mailbox5;
1256 	__le16	mailbox6;
1257 	__le16	mailbox7;
1258 	__le16	mailbox8;
1259 	__le16	mailbox9;
1260 	__le16	mailbox10;
1261 	__le16	mailbox11;
1262 	__le16	mailbox12;
1263 	__le16	mailbox13;
1264 	__le16	mailbox14;
1265 	__le16	mailbox15;
1266 	__le16	mailbox16;
1267 	__le16	mailbox17;
1268 	__le16	mailbox18;
1269 	__le16	mailbox19;
1270 	__le16	mailbox20;
1271 	__le16	mailbox21;
1272 	__le16	mailbox22;
1273 	__le16	mailbox23;
1274 	__le16	mailbox24;
1275 	__le16	mailbox25;
1276 	__le16	mailbox26;
1277 	__le16	mailbox27;
1278 	__le16	mailbox28;
1279 	__le16	mailbox29;
1280 	__le16	mailbox30;
1281 	__le16	mailbox31;
1282 
1283 	__le32	iobase_window;
1284 	__le32	iobase_c4;
1285 	__le32	iobase_c8;
1286 	__le32	unused_4_1[6];		/* Gap. */
1287 	__le32	iobase_q;
1288 	__le32	unused_5[2];		/* Gap. */
1289 	__le32	iobase_select;
1290 	__le32	unused_6[2];		/* Gap. */
1291 	__le32	iobase_sdata;
1292 };
1293 /* RISC-RISC semaphore register PCI offet */
1294 #define RISC_REGISTER_BASE_OFFSET	0x7010
1295 #define RISC_REGISTER_WINDOW_OFFSET	0x6
1296 
1297 /* RISC-RISC semaphore/flag register (risc address 0x7016) */
1298 
1299 #define RISC_SEMAPHORE		0x1UL
1300 #define RISC_SEMAPHORE_WE	(RISC_SEMAPHORE << 16)
1301 #define RISC_SEMAPHORE_CLR	(RISC_SEMAPHORE_WE | 0x0UL)
1302 #define RISC_SEMAPHORE_SET	(RISC_SEMAPHORE_WE | RISC_SEMAPHORE)
1303 
1304 #define RISC_SEMAPHORE_FORCE		0x8000UL
1305 #define RISC_SEMAPHORE_FORCE_WE		(RISC_SEMAPHORE_FORCE << 16)
1306 #define RISC_SEMAPHORE_FORCE_CLR	(RISC_SEMAPHORE_FORCE_WE | 0x0UL)
1307 #define RISC_SEMAPHORE_FORCE_SET	\
1308 		(RISC_SEMAPHORE_FORCE_WE | RISC_SEMAPHORE_FORCE)
1309 
1310 /* RISC semaphore timeouts (ms) */
1311 #define TIMEOUT_SEMAPHORE		2500
1312 #define TIMEOUT_SEMAPHORE_FORCE		2000
1313 #define TIMEOUT_TOTAL_ELAPSED		4500
1314 
1315 /* Trace Control *************************************************************/
1316 
1317 #define TC_AEN_DISABLE		0
1318 
1319 #define TC_EFT_ENABLE		4
1320 #define TC_EFT_DISABLE		5
1321 
1322 #define TC_FCE_ENABLE		8
1323 #define TC_FCE_OPTIONS		0
1324 #define TC_FCE_DEFAULT_RX_SIZE	2112
1325 #define TC_FCE_DEFAULT_TX_SIZE	2112
1326 #define TC_FCE_DISABLE		9
1327 #define TC_FCE_DISABLE_TRACE	BIT_0
1328 
1329 /* MID Support ***************************************************************/
1330 
1331 #define MIN_MULTI_ID_FABRIC	64	/* Must be power-of-2. */
1332 #define MAX_MULTI_ID_FABRIC	256	/* ... */
1333 
1334 struct mid_conf_entry_24xx {
1335 	uint16_t reserved_1;
1336 
1337 	/*
1338 	 * BIT 0  = Enable Hard Loop Id
1339 	 * BIT 1  = Acquire Loop ID in LIPA
1340 	 * BIT 2  = ID not Acquired
1341 	 * BIT 3  = Enable VP
1342 	 * BIT 4  = Enable Initiator Mode
1343 	 * BIT 5  = Disable Target Mode
1344 	 * BIT 6-7 = Reserved
1345 	 */
1346 	uint8_t options;
1347 
1348 	uint8_t hard_address;
1349 
1350 	uint8_t port_name[WWN_SIZE];
1351 	uint8_t node_name[WWN_SIZE];
1352 };
1353 
1354 struct mid_init_cb_24xx {
1355 	struct init_cb_24xx init_cb;
1356 
1357 	__le16	count;
1358 	__le16	options;
1359 
1360 	struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
1361 };
1362 
1363 
1364 struct mid_db_entry_24xx {
1365 	uint16_t status;
1366 #define MDBS_NON_PARTIC		BIT_3
1367 #define MDBS_ID_ACQUIRED	BIT_1
1368 #define MDBS_ENABLED		BIT_0
1369 
1370 	uint8_t options;
1371 	uint8_t hard_address;
1372 
1373 	uint8_t port_name[WWN_SIZE];
1374 	uint8_t node_name[WWN_SIZE];
1375 
1376 	uint8_t port_id[3];
1377 	uint8_t reserved_1;
1378 };
1379 
1380 /*
1381  * Virtual Port Control IOCB
1382  */
1383 #define VP_CTRL_IOCB_TYPE	0x30	/* Virtual Port Control entry. */
1384 struct vp_ctrl_entry_24xx {
1385 	uint8_t entry_type;		/* Entry type. */
1386 	uint8_t entry_count;		/* Entry count. */
1387 	uint8_t sys_define;		/* System defined. */
1388 	uint8_t entry_status;		/* Entry Status. */
1389 
1390 	uint32_t handle;		/* System handle. */
1391 
1392 	__le16	vp_idx_failed;
1393 
1394 	__le16	comp_status;		/* Completion status. */
1395 #define CS_VCE_IOCB_ERROR       0x01    /* Error processing IOCB */
1396 #define CS_VCE_ACQ_ID_ERROR	0x02	/* Error while acquireing ID. */
1397 #define CS_VCE_BUSY		0x05	/* Firmware not ready to accept cmd. */
1398 
1399 	__le16	command;
1400 #define VCE_COMMAND_ENABLE_VPS	0x00	/* Enable VPs. */
1401 #define VCE_COMMAND_DISABLE_VPS	0x08	/* Disable VPs. */
1402 #define VCE_COMMAND_DISABLE_VPS_REINIT	0x09 /* Disable VPs and reinit link. */
1403 #define VCE_COMMAND_DISABLE_VPS_LOGO	0x0a /* Disable VPs and LOGO ports. */
1404 #define VCE_COMMAND_DISABLE_VPS_LOGO_ALL        0x0b /* Disable VPs and LOGO ports. */
1405 
1406 	__le16	vp_count;
1407 
1408 	uint8_t vp_idx_map[16];
1409 	__le16	flags;
1410 	__le16	id;
1411 	uint16_t reserved_4;
1412 	__le16	hopct;
1413 	uint8_t reserved_5[24];
1414 };
1415 
1416 /*
1417  * Modify Virtual Port Configuration IOCB
1418  */
1419 #define VP_CONFIG_IOCB_TYPE	0x31	/* Virtual Port Config entry. */
1420 struct vp_config_entry_24xx {
1421 	uint8_t entry_type;		/* Entry type. */
1422 	uint8_t entry_count;		/* Entry count. */
1423 	uint8_t handle_count;
1424 	uint8_t entry_status;		/* Entry Status. */
1425 
1426 	uint32_t handle;		/* System handle. */
1427 
1428 	__le16	flags;
1429 #define CS_VF_BIND_VPORTS_TO_VF         BIT_0
1430 #define CS_VF_SET_QOS_OF_VPORTS         BIT_1
1431 #define CS_VF_SET_HOPS_OF_VPORTS        BIT_2
1432 
1433 	__le16	comp_status;		/* Completion status. */
1434 #define CS_VCT_STS_ERROR	0x01	/* Specified VPs were not disabled. */
1435 #define CS_VCT_CNT_ERROR	0x02	/* Invalid VP count. */
1436 #define CS_VCT_ERROR		0x03	/* Unknown error. */
1437 #define CS_VCT_IDX_ERROR	0x02	/* Invalid VP index. */
1438 #define CS_VCT_BUSY		0x05	/* Firmware not ready to accept cmd. */
1439 
1440 	uint8_t command;
1441 #define VCT_COMMAND_MOD_VPS     0x00    /* Modify VP configurations. */
1442 #define VCT_COMMAND_MOD_ENABLE_VPS 0x01 /* Modify configuration & enable VPs. */
1443 
1444 	uint8_t vp_count;
1445 
1446 	uint8_t vp_index1;
1447 	uint8_t vp_index2;
1448 
1449 	uint8_t options_idx1;
1450 	uint8_t hard_address_idx1;
1451 	uint16_t reserved_vp1;
1452 	uint8_t port_name_idx1[WWN_SIZE];
1453 	uint8_t node_name_idx1[WWN_SIZE];
1454 
1455 	uint8_t options_idx2;
1456 	uint8_t hard_address_idx2;
1457 	uint16_t reserved_vp2;
1458 	uint8_t port_name_idx2[WWN_SIZE];
1459 	uint8_t node_name_idx2[WWN_SIZE];
1460 	__le16	id;
1461 	uint16_t reserved_4;
1462 	__le16	hopct;
1463 	uint8_t reserved_5[2];
1464 };
1465 
1466 #define VP_RPT_ID_IOCB_TYPE	0x32	/* Report ID Acquisition entry. */
1467 enum VP_STATUS {
1468 	VP_STAT_COMPL,
1469 	VP_STAT_FAIL,
1470 	VP_STAT_ID_CHG,
1471 	VP_STAT_SNS_TO,				/* timeout */
1472 	VP_STAT_SNS_RJT,
1473 	VP_STAT_SCR_TO,				/* timeout */
1474 	VP_STAT_SCR_RJT,
1475 };
1476 
1477 enum VP_FLAGS {
1478 	VP_FLAGS_CON_FLOOP = 1,
1479 	VP_FLAGS_CON_P2P = 2,
1480 	VP_FLAGS_CON_FABRIC = 3,
1481 	VP_FLAGS_NAME_VALID = BIT_5,
1482 };
1483 
1484 struct vp_rpt_id_entry_24xx {
1485 	uint8_t entry_type;		/* Entry type. */
1486 	uint8_t entry_count;		/* Entry count. */
1487 	uint8_t sys_define;		/* System defined. */
1488 	uint8_t entry_status;		/* Entry Status. */
1489 	__le32 resv1;
1490 	uint8_t vp_acquired;
1491 	uint8_t vp_setup;
1492 	uint8_t vp_idx;		/* Format 0=reserved */
1493 	uint8_t vp_status;	/* Format 0=reserved */
1494 
1495 	uint8_t port_id[3];
1496 	uint8_t format;
1497 	union {
1498 		struct _f0 {
1499 			/* format 0 loop */
1500 			uint8_t vp_idx_map[16];
1501 			uint8_t reserved_4[32];
1502 		} f0;
1503 		struct _f1 {
1504 			/* format 1 fabric */
1505 			uint8_t vpstat1_subcode; /* vp_status=1 subcode */
1506 			uint8_t flags;
1507 #define TOPO_MASK  0xE
1508 #define TOPO_FL    0x2
1509 #define TOPO_N2N   0x4
1510 #define TOPO_F     0x6
1511 
1512 			uint16_t fip_flags;
1513 			uint8_t rsv2[12];
1514 
1515 			uint8_t ls_rjt_vendor;
1516 			uint8_t ls_rjt_explanation;
1517 			uint8_t ls_rjt_reason;
1518 			uint8_t rsv3[5];
1519 
1520 			uint8_t port_name[8];
1521 			uint8_t node_name[8];
1522 			uint16_t bbcr;
1523 			uint8_t reserved_5[6];
1524 		} f1;
1525 		struct _f2 { /* format 2: N2N direct connect */
1526 			uint8_t vpstat1_subcode;
1527 			uint8_t flags;
1528 			uint16_t fip_flags;
1529 			uint8_t rsv2[12];
1530 
1531 			uint8_t ls_rjt_vendor;
1532 			uint8_t ls_rjt_explanation;
1533 			uint8_t ls_rjt_reason;
1534 			uint8_t rsv3[5];
1535 
1536 			uint8_t port_name[8];
1537 			uint8_t node_name[8];
1538 			uint16_t bbcr;
1539 			uint8_t reserved_5[2];
1540 			uint8_t remote_nport_id[4];
1541 		} f2;
1542 	} u;
1543 };
1544 
1545 #define VF_EVFP_IOCB_TYPE       0x26    /* Exchange Virtual Fabric Parameters entry. */
1546 struct vf_evfp_entry_24xx {
1547         uint8_t entry_type;             /* Entry type. */
1548         uint8_t entry_count;            /* Entry count. */
1549         uint8_t sys_define;             /* System defined. */
1550         uint8_t entry_status;           /* Entry Status. */
1551 
1552         uint32_t handle;                /* System handle. */
1553         __le16	comp_status;           /* Completion status. */
1554         __le16	timeout;               /* timeout */
1555         __le16	adim_tagging_mode;
1556 
1557         __le16	vfport_id;
1558         uint32_t exch_addr;
1559 
1560         __le16	nport_handle;          /* N_PORT handle. */
1561         __le16	control_flags;
1562         uint32_t io_parameter_0;
1563         uint32_t io_parameter_1;
1564 	__le64	 tx_address __packed;	/* Data segment 0 address. */
1565         uint32_t tx_len;                /* Data segment 0 length. */
1566 	__le64	 rx_address __packed;	/* Data segment 1 address. */
1567         uint32_t rx_len;                /* Data segment 1 length. */
1568 };
1569 
1570 /* END MID Support ***********************************************************/
1571 
1572 /* Flash Description Table ***************************************************/
1573 
1574 struct qla_fdt_layout {
1575 	uint8_t sig[4];
1576 	__le16	version;
1577 	__le16	len;
1578 	__le16	checksum;
1579 	uint8_t unused1[2];
1580 	uint8_t model[16];
1581 	__le16	man_id;
1582 	__le16	id;
1583 	uint8_t flags;
1584 	uint8_t erase_cmd;
1585 	uint8_t alt_erase_cmd;
1586 	uint8_t wrt_enable_cmd;
1587 	uint8_t wrt_enable_bits;
1588 	uint8_t wrt_sts_reg_cmd;
1589 	uint8_t unprotect_sec_cmd;
1590 	uint8_t read_man_id_cmd;
1591 	__le32 block_size;
1592 	__le32 alt_block_size;
1593 	__le32 flash_size;
1594 	__le32 wrt_enable_data;
1595 	uint8_t read_id_addr_len;
1596 	uint8_t wrt_disable_bits;
1597 	uint8_t read_dev_id_len;
1598 	uint8_t chip_erase_cmd;
1599 	__le16	read_timeout;
1600 	uint8_t protect_sec_cmd;
1601 	uint8_t unused2[65];
1602 };
1603 
1604 /* Flash Layout Table ********************************************************/
1605 
1606 struct qla_flt_location {
1607 	uint8_t sig[4];
1608 	__le16	start_lo;
1609 	__le16	start_hi;
1610 	uint8_t version;
1611 	uint8_t unused[5];
1612 	__le16	checksum;
1613 };
1614 
1615 #define FLT_REG_FW		0x01
1616 #define FLT_REG_BOOT_CODE	0x07
1617 #define FLT_REG_VPD_0		0x14
1618 #define FLT_REG_NVRAM_0		0x15
1619 #define FLT_REG_VPD_1		0x16
1620 #define FLT_REG_NVRAM_1		0x17
1621 #define FLT_REG_VPD_2		0xD4
1622 #define FLT_REG_NVRAM_2		0xD5
1623 #define FLT_REG_VPD_3		0xD6
1624 #define FLT_REG_NVRAM_3		0xD7
1625 #define FLT_REG_FDT		0x1a
1626 #define FLT_REG_FLT		0x1c
1627 #define FLT_REG_HW_EVENT_0	0x1d
1628 #define FLT_REG_HW_EVENT_1	0x1f
1629 #define FLT_REG_NPIV_CONF_0	0x29
1630 #define FLT_REG_NPIV_CONF_1	0x2a
1631 #define FLT_REG_GOLD_FW		0x2f
1632 #define FLT_REG_FCP_PRIO_0	0x87
1633 #define FLT_REG_FCP_PRIO_1	0x88
1634 #define FLT_REG_CNA_FW		0x97
1635 #define FLT_REG_BOOT_CODE_8044	0xA2
1636 #define FLT_REG_FCOE_FW		0xA4
1637 #define FLT_REG_FCOE_NVRAM_0	0xAA
1638 #define FLT_REG_FCOE_NVRAM_1	0xAC
1639 
1640 /* 27xx */
1641 #define FLT_REG_IMG_PRI_27XX	0x95
1642 #define FLT_REG_IMG_SEC_27XX	0x96
1643 #define FLT_REG_FW_SEC_27XX	0x02
1644 #define FLT_REG_BOOTLOAD_SEC_27XX	0x9
1645 #define FLT_REG_VPD_SEC_27XX_0	0x50
1646 #define FLT_REG_VPD_SEC_27XX_1	0x52
1647 #define FLT_REG_VPD_SEC_27XX_2	0xD8
1648 #define FLT_REG_VPD_SEC_27XX_3	0xDA
1649 
1650 /* 28xx */
1651 #define FLT_REG_AUX_IMG_PRI_28XX	0x125
1652 #define FLT_REG_AUX_IMG_SEC_28XX	0x126
1653 #define FLT_REG_VPD_SEC_28XX_0		0x10C
1654 #define FLT_REG_VPD_SEC_28XX_1		0x10E
1655 #define FLT_REG_VPD_SEC_28XX_2		0x110
1656 #define FLT_REG_VPD_SEC_28XX_3		0x112
1657 #define FLT_REG_NVRAM_SEC_28XX_0	0x10D
1658 #define FLT_REG_NVRAM_SEC_28XX_1	0x10F
1659 #define FLT_REG_NVRAM_SEC_28XX_2	0x111
1660 #define FLT_REG_NVRAM_SEC_28XX_3	0x113
1661 #define FLT_REG_MPI_PRI_28XX		0xD3
1662 #define FLT_REG_MPI_SEC_28XX		0xF0
1663 #define FLT_REG_PEP_PRI_28XX		0xD1
1664 #define FLT_REG_PEP_SEC_28XX		0xF1
1665 
1666 struct qla_flt_region {
1667 	__le16	code;
1668 	uint8_t attribute;
1669 	uint8_t reserved;
1670 	__le32 size;
1671 	__le32 start;
1672 	__le32 end;
1673 };
1674 
1675 struct qla_flt_header {
1676 	__le16	version;
1677 	__le16	length;
1678 	__le16	checksum;
1679 	__le16	unused;
1680 	struct qla_flt_region region[0];
1681 };
1682 
1683 #define FLT_REGION_SIZE		16
1684 #define FLT_MAX_REGIONS		0xFF
1685 #define FLT_REGIONS_SIZE	(FLT_REGION_SIZE * FLT_MAX_REGIONS)
1686 
1687 /* Flash NPIV Configuration Table ********************************************/
1688 
1689 struct qla_npiv_header {
1690 	uint8_t sig[2];
1691 	__le16	version;
1692 	__le16	entries;
1693 	__le16	unused[4];
1694 	__le16	checksum;
1695 };
1696 
1697 struct qla_npiv_entry {
1698 	__le16	flags;
1699 	__le16	vf_id;
1700 	uint8_t q_qos;
1701 	uint8_t f_qos;
1702 	__le16	unused1;
1703 	uint8_t port_name[WWN_SIZE];
1704 	uint8_t node_name[WWN_SIZE];
1705 };
1706 
1707 /* 84XX Support **************************************************************/
1708 
1709 #define MBA_ISP84XX_ALERT	0x800f  /* Alert Notification. */
1710 #define A84_PANIC_RECOVERY	0x1
1711 #define A84_OP_LOGIN_COMPLETE	0x2
1712 #define A84_DIAG_LOGIN_COMPLETE	0x3
1713 #define A84_GOLD_LOGIN_COMPLETE	0x4
1714 
1715 #define MBC_ISP84XX_RESET	0x3a    /* Reset. */
1716 
1717 #define FSTATE_REMOTE_FC_DOWN	BIT_0
1718 #define FSTATE_NSL_LINK_DOWN	BIT_1
1719 #define FSTATE_IS_DIAG_FW	BIT_2
1720 #define FSTATE_LOGGED_IN	BIT_3
1721 #define FSTATE_WAITING_FOR_VERIFY	BIT_4
1722 
1723 #define VERIFY_CHIP_IOCB_TYPE	0x1B
1724 struct verify_chip_entry_84xx {
1725 	uint8_t entry_type;
1726 	uint8_t entry_count;
1727 	uint8_t sys_defined;
1728 	uint8_t entry_status;
1729 
1730 	uint32_t handle;
1731 
1732 	__le16	options;
1733 #define VCO_DONT_UPDATE_FW	BIT_0
1734 #define VCO_FORCE_UPDATE	BIT_1
1735 #define VCO_DONT_RESET_UPDATE	BIT_2
1736 #define VCO_DIAG_FW		BIT_3
1737 #define VCO_END_OF_DATA		BIT_14
1738 #define VCO_ENABLE_DSD		BIT_15
1739 
1740 	__le16	reserved_1;
1741 
1742 	__le16	data_seg_cnt;
1743 	__le16	reserved_2[3];
1744 
1745 	__le32	fw_ver;
1746 	__le32	exchange_address;
1747 
1748 	__le32 reserved_3[3];
1749 	__le32	fw_size;
1750 	__le32	fw_seq_size;
1751 	__le32	relative_offset;
1752 
1753 	struct dsd64 dsd;
1754 };
1755 
1756 struct verify_chip_rsp_84xx {
1757 	uint8_t entry_type;
1758 	uint8_t entry_count;
1759 	uint8_t sys_defined;
1760 	uint8_t entry_status;
1761 
1762 	uint32_t handle;
1763 
1764 	__le16	comp_status;
1765 #define CS_VCS_CHIP_FAILURE	0x3
1766 #define CS_VCS_BAD_EXCHANGE	0x8
1767 #define CS_VCS_SEQ_COMPLETEi	0x40
1768 
1769 	__le16	failure_code;
1770 #define VFC_CHECKSUM_ERROR	0x1
1771 #define VFC_INVALID_LEN		0x2
1772 #define VFC_ALREADY_IN_PROGRESS	0x8
1773 
1774 	__le16	reserved_1[4];
1775 
1776 	__le32	fw_ver;
1777 	__le32	exchange_address;
1778 
1779 	__le32 reserved_2[6];
1780 };
1781 
1782 #define ACCESS_CHIP_IOCB_TYPE	0x2B
1783 struct access_chip_84xx {
1784 	uint8_t entry_type;
1785 	uint8_t entry_count;
1786 	uint8_t sys_defined;
1787 	uint8_t entry_status;
1788 
1789 	uint32_t handle;
1790 
1791 	__le16	options;
1792 #define ACO_DUMP_MEMORY		0x0
1793 #define ACO_LOAD_MEMORY		0x1
1794 #define ACO_CHANGE_CONFIG_PARAM	0x2
1795 #define ACO_REQUEST_INFO	0x3
1796 
1797 	__le16	reserved1;
1798 
1799 	__le16	dseg_count;
1800 	__le16	reserved2[3];
1801 
1802 	__le32	parameter1;
1803 	__le32	parameter2;
1804 	__le32	parameter3;
1805 
1806 	__le32	reserved3[3];
1807 	__le32	total_byte_cnt;
1808 	__le32	reserved4;
1809 
1810 	struct dsd64 dsd;
1811 };
1812 
1813 struct access_chip_rsp_84xx {
1814 	uint8_t entry_type;
1815 	uint8_t entry_count;
1816 	uint8_t sys_defined;
1817 	uint8_t entry_status;
1818 
1819 	uint32_t handle;
1820 
1821 	__le16	comp_status;
1822 	__le16	failure_code;
1823 	__le32	residual_count;
1824 
1825 	__le32	reserved[12];
1826 };
1827 
1828 /* 81XX Support **************************************************************/
1829 
1830 #define MBA_DCBX_START		0x8016
1831 #define MBA_DCBX_COMPLETE	0x8030
1832 #define MBA_FCF_CONF_ERR	0x8031
1833 #define MBA_DCBX_PARAM_UPDATE	0x8032
1834 #define MBA_IDC_COMPLETE	0x8100
1835 #define MBA_IDC_NOTIFY		0x8101
1836 #define MBA_IDC_TIME_EXT	0x8102
1837 
1838 #define MBC_IDC_ACK		0x101
1839 #define MBC_RESTART_MPI_FW	0x3d
1840 #define MBC_FLASH_ACCESS_CTRL	0x3e	/* Control flash access. */
1841 #define MBC_GET_XGMAC_STATS	0x7a
1842 #define MBC_GET_DCBX_PARAMS	0x51
1843 
1844 /*
1845  * ISP83xx mailbox commands
1846  */
1847 #define MBC_WRITE_REMOTE_REG		0x0001 /* Write remote register */
1848 #define MBC_READ_REMOTE_REG		0x0009 /* Read remote register */
1849 #define MBC_RESTART_NIC_FIRMWARE	0x003d /* Restart NIC firmware */
1850 #define MBC_SET_ACCESS_CONTROL		0x003e /* Access control command */
1851 
1852 /* Flash access control option field bit definitions */
1853 #define FAC_OPT_FORCE_SEMAPHORE		BIT_15
1854 #define FAC_OPT_REQUESTOR_ID		BIT_14
1855 #define FAC_OPT_CMD_SUBCODE		0xff
1856 
1857 /* Flash access control command subcodes */
1858 #define FAC_OPT_CMD_WRITE_PROTECT	0x00
1859 #define FAC_OPT_CMD_WRITE_ENABLE	0x01
1860 #define FAC_OPT_CMD_ERASE_SECTOR	0x02
1861 #define FAC_OPT_CMD_LOCK_SEMAPHORE	0x03
1862 #define FAC_OPT_CMD_UNLOCK_SEMAPHORE	0x04
1863 #define FAC_OPT_CMD_GET_SECTOR_SIZE	0x05
1864 
1865 /* enhanced features bit definitions */
1866 #define NEF_LR_DIST_ENABLE	BIT_0
1867 
1868 /* LR Distance bit positions */
1869 #define LR_DIST_NV_POS		2
1870 #define LR_DIST_NV_MASK		0xf
1871 #define LR_DIST_FW_POS		12
1872 
1873 /* FAC semaphore defines */
1874 #define FAC_SEMAPHORE_UNLOCK    0
1875 #define FAC_SEMAPHORE_LOCK      1
1876 
1877 struct nvram_81xx {
1878 	/* NVRAM header. */
1879 	uint8_t id[4];
1880 	__le16	nvram_version;
1881 	__le16	reserved_0;
1882 
1883 	/* Firmware Initialization Control Block. */
1884 	__le16	version;
1885 	__le16	reserved_1;
1886 	__le16	frame_payload_size;
1887 	__le16	execution_throttle;
1888 	__le16	exchange_count;
1889 	__le16	reserved_2;
1890 
1891 	uint8_t port_name[WWN_SIZE];
1892 	uint8_t node_name[WWN_SIZE];
1893 
1894 	__le16	login_retry_count;
1895 	__le16	reserved_3;
1896 	__le16	interrupt_delay_timer;
1897 	__le16	login_timeout;
1898 
1899 	__le32	firmware_options_1;
1900 	__le32	firmware_options_2;
1901 	__le32	firmware_options_3;
1902 
1903 	__le16	reserved_4[4];
1904 
1905 	/* Offset 64. */
1906 	uint8_t enode_mac[6];
1907 	__le16	reserved_5[5];
1908 
1909 	/* Offset 80. */
1910 	__le16	reserved_6[24];
1911 
1912 	/* Offset 128. */
1913 	__le16	ex_version;
1914 	uint8_t prio_fcf_matching_flags;
1915 	uint8_t reserved_6_1[3];
1916 	__le16	pri_fcf_vlan_id;
1917 	uint8_t pri_fcf_fabric_name[8];
1918 	__le16	reserved_6_2[7];
1919 	uint8_t spma_mac_addr[6];
1920 	__le16	reserved_6_3[14];
1921 
1922 	/* Offset 192. */
1923 	uint8_t min_supported_speed;
1924 	uint8_t reserved_7_0;
1925 	__le16	reserved_7[31];
1926 
1927 	/*
1928 	 * BIT 0  = Enable spinup delay
1929 	 * BIT 1  = Disable BIOS
1930 	 * BIT 2  = Enable Memory Map BIOS
1931 	 * BIT 3  = Enable Selectable Boot
1932 	 * BIT 4  = Disable RISC code load
1933 	 * BIT 5  = Disable Serdes
1934 	 * BIT 6  = Opt boot mode
1935 	 * BIT 7  = Interrupt enable
1936 	 *
1937 	 * BIT 8  = EV Control enable
1938 	 * BIT 9  = Enable lip reset
1939 	 * BIT 10 = Enable lip full login
1940 	 * BIT 11 = Enable target reset
1941 	 * BIT 12 = Stop firmware
1942 	 * BIT 13 = Enable nodename option
1943 	 * BIT 14 = Default WWPN valid
1944 	 * BIT 15 = Enable alternate WWN
1945 	 *
1946 	 * BIT 16 = CLP LUN string
1947 	 * BIT 17 = CLP Target string
1948 	 * BIT 18 = CLP BIOS enable string
1949 	 * BIT 19 = CLP Serdes string
1950 	 * BIT 20 = CLP WWPN string
1951 	 * BIT 21 = CLP WWNN string
1952 	 * BIT 22 =
1953 	 * BIT 23 =
1954 	 * BIT 24 = Keep WWPN
1955 	 * BIT 25 = Temp WWPN
1956 	 * BIT 26-31 =
1957 	 */
1958 	__le32	host_p;
1959 
1960 	uint8_t alternate_port_name[WWN_SIZE];
1961 	uint8_t alternate_node_name[WWN_SIZE];
1962 
1963 	uint8_t boot_port_name[WWN_SIZE];
1964 	__le16	boot_lun_number;
1965 	__le16	reserved_8;
1966 
1967 	uint8_t alt1_boot_port_name[WWN_SIZE];
1968 	__le16	alt1_boot_lun_number;
1969 	__le16	reserved_9;
1970 
1971 	uint8_t alt2_boot_port_name[WWN_SIZE];
1972 	__le16	alt2_boot_lun_number;
1973 	__le16	reserved_10;
1974 
1975 	uint8_t alt3_boot_port_name[WWN_SIZE];
1976 	__le16	alt3_boot_lun_number;
1977 	__le16	reserved_11;
1978 
1979 	/*
1980 	 * BIT 0 = Selective Login
1981 	 * BIT 1 = Alt-Boot Enable
1982 	 * BIT 2 = Reserved
1983 	 * BIT 3 = Boot Order List
1984 	 * BIT 4 = Reserved
1985 	 * BIT 5 = Selective LUN
1986 	 * BIT 6 = Reserved
1987 	 * BIT 7-31 =
1988 	 */
1989 	__le32	efi_parameters;
1990 
1991 	uint8_t reset_delay;
1992 	uint8_t reserved_12;
1993 	__le16	reserved_13;
1994 
1995 	__le16	boot_id_number;
1996 	__le16	reserved_14;
1997 
1998 	__le16	max_luns_per_target;
1999 	__le16	reserved_15;
2000 
2001 	__le16	port_down_retry_count;
2002 	__le16	link_down_timeout;
2003 
2004 	/* FCode parameters. */
2005 	__le16	fcode_parameter;
2006 
2007 	__le16	reserved_16[3];
2008 
2009 	/* Offset 352. */
2010 	uint8_t reserved_17[4];
2011 	__le16	reserved_18[5];
2012 	uint8_t reserved_19[2];
2013 	__le16	reserved_20[8];
2014 
2015 	/* Offset 384. */
2016 	uint8_t reserved_21[16];
2017 	__le16	reserved_22[3];
2018 
2019 	/* Offset 406 (0x196) Enhanced Features
2020 	 * BIT 0    = Extended BB credits for LR
2021 	 * BIT 1    = Virtual Fabric Enable
2022 	 * BIT 2-5  = Distance Support if BIT 0 is on
2023 	 * BIT 6-15 = Unused
2024 	 */
2025 	uint16_t enhanced_features;
2026 
2027 	uint16_t reserved_24[4];
2028 
2029 	/* Offset 416. */
2030 	__le16	reserved_25[32];
2031 
2032 	/* Offset 480. */
2033 	uint8_t model_name[16];
2034 
2035 	/* Offset 496. */
2036 	__le16	feature_mask_l;
2037 	__le16	feature_mask_h;
2038 	__le16	reserved_26[2];
2039 
2040 	__le16	subsystem_vendor_id;
2041 	__le16	subsystem_device_id;
2042 
2043 	__le32	checksum;
2044 };
2045 
2046 /*
2047  * ISP Initialization Control Block.
2048  * Little endian except where noted.
2049  */
2050 #define	ICB_VERSION 1
2051 struct init_cb_81xx {
2052 	__le16	version;
2053 	__le16	reserved_1;
2054 
2055 	__le16	frame_payload_size;
2056 	__le16	execution_throttle;
2057 	__le16	exchange_count;
2058 
2059 	__le16	reserved_2;
2060 
2061 	uint8_t port_name[WWN_SIZE];		/* Big endian. */
2062 	uint8_t node_name[WWN_SIZE];		/* Big endian. */
2063 
2064 	__le16	response_q_inpointer;
2065 	__le16	request_q_outpointer;
2066 
2067 	__le16	login_retry_count;
2068 
2069 	__le16	prio_request_q_outpointer;
2070 
2071 	__le16	response_q_length;
2072 	__le16	request_q_length;
2073 
2074 	__le16	reserved_3;
2075 
2076 	__le16	prio_request_q_length;
2077 
2078 	__le64	 request_q_address __packed;
2079 	__le64	 response_q_address __packed;
2080 	__le64	 prio_request_q_address __packed;
2081 
2082 	uint8_t reserved_4[8];
2083 
2084 	__le16	atio_q_inpointer;
2085 	__le16	atio_q_length;
2086 	__le64	 atio_q_address __packed;
2087 
2088 	__le16	interrupt_delay_timer;		/* 100us increments. */
2089 	__le16	login_timeout;
2090 
2091 	/*
2092 	 * BIT 0-3 = Reserved
2093 	 * BIT 4  = Enable Target Mode
2094 	 * BIT 5  = Disable Initiator Mode
2095 	 * BIT 6  = Reserved
2096 	 * BIT 7  = Reserved
2097 	 *
2098 	 * BIT 8-13 = Reserved
2099 	 * BIT 14 = Node Name Option
2100 	 * BIT 15-31 = Reserved
2101 	 */
2102 	__le32	firmware_options_1;
2103 
2104 	/*
2105 	 * BIT 0  = Operation Mode bit 0
2106 	 * BIT 1  = Operation Mode bit 1
2107 	 * BIT 2  = Operation Mode bit 2
2108 	 * BIT 3  = Operation Mode bit 3
2109 	 * BIT 4-7 = Reserved
2110 	 *
2111 	 * BIT 8  = Enable Class 2
2112 	 * BIT 9  = Enable ACK0
2113 	 * BIT 10 = Reserved
2114 	 * BIT 11 = Enable FC-SP Security
2115 	 * BIT 12 = FC Tape Enable
2116 	 * BIT 13 = Reserved
2117 	 * BIT 14 = Enable Target PRLI Control
2118 	 * BIT 15-31 = Reserved
2119 	 */
2120 	__le32	firmware_options_2;
2121 
2122 	/*
2123 	 * BIT 0-3 = Reserved
2124 	 * BIT 4  = FCP RSP Payload bit 0
2125 	 * BIT 5  = FCP RSP Payload bit 1
2126 	 * BIT 6  = Enable Receive Out-of-Order data frame handling
2127 	 * BIT 7  = Reserved
2128 	 *
2129 	 * BIT 8  = Reserved
2130 	 * BIT 9  = Enable Out-of-Order FCP_XFER_RDY relative offset handling
2131 	 * BIT 10-16 = Reserved
2132 	 * BIT 17 = Enable multiple FCFs
2133 	 * BIT 18-20 = MAC addressing mode
2134 	 * BIT 21-25 = Ethernet data rate
2135 	 * BIT 26 = Enable ethernet header rx IOCB for ATIO q
2136 	 * BIT 27 = Enable ethernet header rx IOCB for response q
2137 	 * BIT 28 = SPMA selection bit 0
2138 	 * BIT 28 = SPMA selection bit 1
2139 	 * BIT 30-31 = Reserved
2140 	 */
2141 	__le32	firmware_options_3;
2142 
2143 	uint8_t  reserved_5[8];
2144 
2145 	uint8_t enode_mac[6];
2146 
2147 	uint8_t reserved_6[10];
2148 };
2149 
2150 struct mid_init_cb_81xx {
2151 	struct init_cb_81xx init_cb;
2152 
2153 	uint16_t count;
2154 	uint16_t options;
2155 
2156 	struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
2157 };
2158 
2159 struct ex_init_cb_81xx {
2160 	uint16_t ex_version;
2161 	uint8_t prio_fcf_matching_flags;
2162 	uint8_t reserved_1[3];
2163 	uint16_t pri_fcf_vlan_id;
2164 	uint8_t pri_fcf_fabric_name[8];
2165 	uint16_t reserved_2[7];
2166 	uint8_t spma_mac_addr[6];
2167 	uint16_t reserved_3[14];
2168 };
2169 
2170 #define FARX_ACCESS_FLASH_CONF_81XX	0x7FFD0000
2171 #define FARX_ACCESS_FLASH_DATA_81XX	0x7F800000
2172 #define FARX_ACCESS_FLASH_CONF_28XX	0x7FFD0000
2173 #define FARX_ACCESS_FLASH_DATA_28XX	0x7F7D0000
2174 
2175 /* FCP priority config defines *************************************/
2176 /* operations */
2177 #define QLFC_FCP_PRIO_DISABLE           0x0
2178 #define QLFC_FCP_PRIO_ENABLE            0x1
2179 #define QLFC_FCP_PRIO_GET_CONFIG        0x2
2180 #define QLFC_FCP_PRIO_SET_CONFIG        0x3
2181 
2182 struct qla_fcp_prio_entry {
2183 	uint16_t flags;         /* Describes parameter(s) in FCP        */
2184 	/* priority entry that are valid        */
2185 #define FCP_PRIO_ENTRY_VALID            0x1
2186 #define FCP_PRIO_ENTRY_TAG_VALID        0x2
2187 #define FCP_PRIO_ENTRY_SPID_VALID       0x4
2188 #define FCP_PRIO_ENTRY_DPID_VALID       0x8
2189 #define FCP_PRIO_ENTRY_LUNB_VALID       0x10
2190 #define FCP_PRIO_ENTRY_LUNE_VALID       0x20
2191 #define FCP_PRIO_ENTRY_SWWN_VALID       0x40
2192 #define FCP_PRIO_ENTRY_DWWN_VALID       0x80
2193 	uint8_t  tag;           /* Priority value                   */
2194 	uint8_t  reserved;      /* Reserved for future use          */
2195 	uint32_t src_pid;       /* Src port id. high order byte     */
2196 				/* unused; -1 (wild card)           */
2197 	uint32_t dst_pid;       /* Src port id. high order byte     */
2198 	/* unused; -1 (wild card)           */
2199 	uint16_t lun_beg;       /* 1st lun num of lun range.        */
2200 				/* -1 (wild card)                   */
2201 	uint16_t lun_end;       /* 2nd lun num of lun range.        */
2202 				/* -1 (wild card)                   */
2203 	uint8_t  src_wwpn[8];   /* Source WWPN: -1 (wild card)      */
2204 	uint8_t  dst_wwpn[8];   /* Destination WWPN: -1 (wild card) */
2205 };
2206 
2207 struct qla_fcp_prio_cfg {
2208 	uint8_t  signature[4];  /* "HQOS" signature of config data  */
2209 	uint16_t version;       /* 1: Initial version               */
2210 	uint16_t length;        /* config data size in num bytes    */
2211 	uint16_t checksum;      /* config data bytes checksum       */
2212 	uint16_t num_entries;   /* Number of entries                */
2213 	uint16_t size_of_entry; /* Size of each entry in num bytes  */
2214 	uint8_t  attributes;    /* enable/disable, persistence      */
2215 #define FCP_PRIO_ATTR_DISABLE   0x0
2216 #define FCP_PRIO_ATTR_ENABLE    0x1
2217 #define FCP_PRIO_ATTR_PERSIST   0x2
2218 	uint8_t  reserved;      /* Reserved for future use          */
2219 #define FCP_PRIO_CFG_HDR_SIZE   offsetof(struct qla_fcp_prio_cfg, entry)
2220 	struct qla_fcp_prio_entry entry[1023]; /* fcp priority entries  */
2221 	uint8_t  reserved2[16];
2222 };
2223 
2224 #define FCP_PRIO_CFG_SIZE       (32*1024) /* fcp prio data per port*/
2225 
2226 /* 25XX Support ****************************************************/
2227 #define FA_FCP_PRIO0_ADDR_25	0x3C000
2228 #define FA_FCP_PRIO1_ADDR_25	0x3E000
2229 
2230 /* 81XX Flash locations -- occupies second 2MB region. */
2231 #define FA_BOOT_CODE_ADDR_81	0x80000
2232 #define FA_RISC_CODE_ADDR_81	0xA0000
2233 #define FA_FW_AREA_ADDR_81	0xC0000
2234 #define FA_VPD_NVRAM_ADDR_81	0xD0000
2235 #define FA_VPD0_ADDR_81		0xD0000
2236 #define FA_VPD1_ADDR_81		0xD0400
2237 #define FA_NVRAM0_ADDR_81	0xD0080
2238 #define FA_NVRAM1_ADDR_81	0xD0180
2239 #define FA_FEATURE_ADDR_81	0xD4000
2240 #define FA_FLASH_DESCR_ADDR_81	0xD8000
2241 #define FA_FLASH_LAYOUT_ADDR_81	0xD8400
2242 #define FA_HW_EVENT0_ADDR_81	0xDC000
2243 #define FA_HW_EVENT1_ADDR_81	0xDC400
2244 #define FA_NPIV_CONF0_ADDR_81	0xD1000
2245 #define FA_NPIV_CONF1_ADDR_81	0xD2000
2246 
2247 /* 83XX Flash locations -- occupies second 8MB region. */
2248 #define FA_FLASH_LAYOUT_ADDR_83	(0x3F1000/4)
2249 #define FA_FLASH_LAYOUT_ADDR_28	(0x11000/4)
2250 
2251 #define NVRAM_DUAL_FCP_NVME_FLAG_OFFSET	0x196
2252 
2253 #endif
2254