1 /* 2 * QLogic Fibre Channel HBA Driver 3 * Copyright (c) 2003-2014 QLogic Corporation 4 * 5 * See LICENSE.qla2xxx for copyright and licensing details. 6 */ 7 #ifndef __QLA_DEF_H 8 #define __QLA_DEF_H 9 10 #include <linux/kernel.h> 11 #include <linux/init.h> 12 #include <linux/types.h> 13 #include <linux/module.h> 14 #include <linux/list.h> 15 #include <linux/pci.h> 16 #include <linux/dma-mapping.h> 17 #include <linux/sched.h> 18 #include <linux/slab.h> 19 #include <linux/dmapool.h> 20 #include <linux/mempool.h> 21 #include <linux/spinlock.h> 22 #include <linux/completion.h> 23 #include <linux/interrupt.h> 24 #include <linux/workqueue.h> 25 #include <linux/firmware.h> 26 #include <linux/aer.h> 27 #include <linux/mutex.h> 28 29 #include <scsi/scsi.h> 30 #include <scsi/scsi_host.h> 31 #include <scsi/scsi_device.h> 32 #include <scsi/scsi_cmnd.h> 33 #include <scsi/scsi_transport_fc.h> 34 #include <scsi/scsi_bsg_fc.h> 35 36 #include "qla_bsg.h" 37 #include "qla_nx.h" 38 #include "qla_nx2.h" 39 #define QLA2XXX_DRIVER_NAME "qla2xxx" 40 #define QLA2XXX_APIDEV "ql2xapidev" 41 #define QLA2XXX_MANUFACTURER "QLogic Corporation" 42 43 /* 44 * We have MAILBOX_REGISTER_COUNT sized arrays in a few places, 45 * but that's fine as we don't look at the last 24 ones for 46 * ISP2100 HBAs. 47 */ 48 #define MAILBOX_REGISTER_COUNT_2100 8 49 #define MAILBOX_REGISTER_COUNT_2200 24 50 #define MAILBOX_REGISTER_COUNT 32 51 52 #define QLA2200A_RISC_ROM_VER 4 53 #define FPM_2300 6 54 #define FPM_2310 7 55 56 #include "qla_settings.h" 57 58 /* 59 * Data bit definitions 60 */ 61 #define BIT_0 0x1 62 #define BIT_1 0x2 63 #define BIT_2 0x4 64 #define BIT_3 0x8 65 #define BIT_4 0x10 66 #define BIT_5 0x20 67 #define BIT_6 0x40 68 #define BIT_7 0x80 69 #define BIT_8 0x100 70 #define BIT_9 0x200 71 #define BIT_10 0x400 72 #define BIT_11 0x800 73 #define BIT_12 0x1000 74 #define BIT_13 0x2000 75 #define BIT_14 0x4000 76 #define BIT_15 0x8000 77 #define BIT_16 0x10000 78 #define BIT_17 0x20000 79 #define BIT_18 0x40000 80 #define BIT_19 0x80000 81 #define BIT_20 0x100000 82 #define BIT_21 0x200000 83 #define BIT_22 0x400000 84 #define BIT_23 0x800000 85 #define BIT_24 0x1000000 86 #define BIT_25 0x2000000 87 #define BIT_26 0x4000000 88 #define BIT_27 0x8000000 89 #define BIT_28 0x10000000 90 #define BIT_29 0x20000000 91 #define BIT_30 0x40000000 92 #define BIT_31 0x80000000 93 94 #define LSB(x) ((uint8_t)(x)) 95 #define MSB(x) ((uint8_t)((uint16_t)(x) >> 8)) 96 97 #define LSW(x) ((uint16_t)(x)) 98 #define MSW(x) ((uint16_t)((uint32_t)(x) >> 16)) 99 100 #define LSD(x) ((uint32_t)((uint64_t)(x))) 101 #define MSD(x) ((uint32_t)((((uint64_t)(x)) >> 16) >> 16)) 102 103 #define MAKE_HANDLE(x, y) ((uint32_t)((((uint32_t)(x)) << 16) | (uint32_t)(y))) 104 105 /* 106 * I/O register 107 */ 108 109 #define RD_REG_BYTE(addr) readb(addr) 110 #define RD_REG_WORD(addr) readw(addr) 111 #define RD_REG_DWORD(addr) readl(addr) 112 #define RD_REG_BYTE_RELAXED(addr) readb_relaxed(addr) 113 #define RD_REG_WORD_RELAXED(addr) readw_relaxed(addr) 114 #define RD_REG_DWORD_RELAXED(addr) readl_relaxed(addr) 115 #define WRT_REG_BYTE(addr, data) writeb(data,addr) 116 #define WRT_REG_WORD(addr, data) writew(data,addr) 117 #define WRT_REG_DWORD(addr, data) writel(data,addr) 118 119 /* 120 * ISP83XX specific remote register addresses 121 */ 122 #define QLA83XX_LED_PORT0 0x00201320 123 #define QLA83XX_LED_PORT1 0x00201328 124 #define QLA83XX_IDC_DEV_STATE 0x22102384 125 #define QLA83XX_IDC_MAJOR_VERSION 0x22102380 126 #define QLA83XX_IDC_MINOR_VERSION 0x22102398 127 #define QLA83XX_IDC_DRV_PRESENCE 0x22102388 128 #define QLA83XX_IDC_DRIVER_ACK 0x2210238c 129 #define QLA83XX_IDC_CONTROL 0x22102390 130 #define QLA83XX_IDC_AUDIT 0x22102394 131 #define QLA83XX_IDC_LOCK_RECOVERY 0x2210239c 132 #define QLA83XX_DRIVER_LOCKID 0x22102104 133 #define QLA83XX_DRIVER_LOCK 0x8111c028 134 #define QLA83XX_DRIVER_UNLOCK 0x8111c02c 135 #define QLA83XX_FLASH_LOCKID 0x22102100 136 #define QLA83XX_FLASH_LOCK 0x8111c010 137 #define QLA83XX_FLASH_UNLOCK 0x8111c014 138 #define QLA83XX_DEV_PARTINFO1 0x221023e0 139 #define QLA83XX_DEV_PARTINFO2 0x221023e4 140 #define QLA83XX_FW_HEARTBEAT 0x221020b0 141 #define QLA83XX_PEG_HALT_STATUS1 0x221020a8 142 #define QLA83XX_PEG_HALT_STATUS2 0x221020ac 143 144 /* 83XX: Macros defining 8200 AEN Reason codes */ 145 #define IDC_DEVICE_STATE_CHANGE BIT_0 146 #define IDC_PEG_HALT_STATUS_CHANGE BIT_1 147 #define IDC_NIC_FW_REPORTED_FAILURE BIT_2 148 #define IDC_HEARTBEAT_FAILURE BIT_3 149 150 /* 83XX: Macros defining 8200 AEN Error-levels */ 151 #define ERR_LEVEL_NON_FATAL 0x1 152 #define ERR_LEVEL_RECOVERABLE_FATAL 0x2 153 #define ERR_LEVEL_UNRECOVERABLE_FATAL 0x4 154 155 /* 83XX: Macros for IDC Version */ 156 #define QLA83XX_SUPP_IDC_MAJOR_VERSION 0x01 157 #define QLA83XX_SUPP_IDC_MINOR_VERSION 0x0 158 159 /* 83XX: Macros for scheduling dpc tasks */ 160 #define QLA83XX_NIC_CORE_RESET 0x1 161 #define QLA83XX_IDC_STATE_HANDLER 0x2 162 #define QLA83XX_NIC_CORE_UNRECOVERABLE 0x3 163 164 /* 83XX: Macros for defining IDC-Control bits */ 165 #define QLA83XX_IDC_RESET_DISABLED BIT_0 166 #define QLA83XX_IDC_GRACEFUL_RESET BIT_1 167 168 /* 83XX: Macros for different timeouts */ 169 #define QLA83XX_IDC_INITIALIZATION_TIMEOUT 30 170 #define QLA83XX_IDC_RESET_ACK_TIMEOUT 10 171 #define QLA83XX_MAX_LOCK_RECOVERY_WAIT (2 * HZ) 172 173 /* 83XX: Macros for defining class in DEV-Partition Info register */ 174 #define QLA83XX_CLASS_TYPE_NONE 0x0 175 #define QLA83XX_CLASS_TYPE_NIC 0x1 176 #define QLA83XX_CLASS_TYPE_FCOE 0x2 177 #define QLA83XX_CLASS_TYPE_ISCSI 0x3 178 179 /* 83XX: Macros for IDC Lock-Recovery stages */ 180 #define IDC_LOCK_RECOVERY_STAGE1 0x1 /* Stage1: Intent for 181 * lock-recovery 182 */ 183 #define IDC_LOCK_RECOVERY_STAGE2 0x2 /* Stage2: Perform lock-recovery */ 184 185 /* 83XX: Macros for IDC Audit type */ 186 #define IDC_AUDIT_TIMESTAMP 0x0 /* IDC-AUDIT: Record timestamp of 187 * dev-state change to NEED-RESET 188 * or NEED-QUIESCENT 189 */ 190 #define IDC_AUDIT_COMPLETION 0x1 /* IDC-AUDIT: Record duration of 191 * reset-recovery completion is 192 * second 193 */ 194 195 /* 196 * The ISP2312 v2 chip cannot access the FLASH/GPIO registers via MMIO in an 197 * 133Mhz slot. 198 */ 199 #define RD_REG_WORD_PIO(addr) (inw((unsigned long)addr)) 200 #define WRT_REG_WORD_PIO(addr, data) (outw(data,(unsigned long)addr)) 201 202 /* 203 * Fibre Channel device definitions. 204 */ 205 #define WWN_SIZE 8 /* Size of WWPN, WWN & WWNN */ 206 #define MAX_FIBRE_DEVICES_2100 512 207 #define MAX_FIBRE_DEVICES_2400 2048 208 #define MAX_FIBRE_DEVICES_LOOP 128 209 #define MAX_FIBRE_DEVICES_MAX MAX_FIBRE_DEVICES_2400 210 #define LOOPID_MAP_SIZE (ha->max_fibre_devices) 211 #define MAX_FIBRE_LUNS 0xFFFF 212 #define MAX_HOST_COUNT 16 213 214 /* 215 * Host adapter default definitions. 216 */ 217 #define MAX_BUSES 1 /* We only have one bus today */ 218 #define MIN_LUNS 8 219 #define MAX_LUNS MAX_FIBRE_LUNS 220 #define MAX_CMDS_PER_LUN 255 221 222 /* 223 * Fibre Channel device definitions. 224 */ 225 #define SNS_LAST_LOOP_ID_2100 0xfe 226 #define SNS_LAST_LOOP_ID_2300 0x7ff 227 228 #define LAST_LOCAL_LOOP_ID 0x7d 229 #define SNS_FL_PORT 0x7e 230 #define FABRIC_CONTROLLER 0x7f 231 #define SIMPLE_NAME_SERVER 0x80 232 #define SNS_FIRST_LOOP_ID 0x81 233 #define MANAGEMENT_SERVER 0xfe 234 #define BROADCAST 0xff 235 236 /* 237 * There is no correspondence between an N-PORT id and an AL_PA. Therefore the 238 * valid range of an N-PORT id is 0 through 0x7ef. 239 */ 240 #define NPH_LAST_HANDLE 0x7ef 241 #define NPH_MGMT_SERVER 0x7fa /* FFFFFA */ 242 #define NPH_SNS 0x7fc /* FFFFFC */ 243 #define NPH_FABRIC_CONTROLLER 0x7fd /* FFFFFD */ 244 #define NPH_F_PORT 0x7fe /* FFFFFE */ 245 #define NPH_IP_BROADCAST 0x7ff /* FFFFFF */ 246 247 #define MAX_CMDSZ 16 /* SCSI maximum CDB size. */ 248 #include "qla_fw.h" 249 /* 250 * Timeout timer counts in seconds 251 */ 252 #define PORT_RETRY_TIME 1 253 #define LOOP_DOWN_TIMEOUT 60 254 #define LOOP_DOWN_TIME 255 /* 240 */ 255 #define LOOP_DOWN_RESET (LOOP_DOWN_TIME - 30) 256 257 #define DEFAULT_OUTSTANDING_COMMANDS 1024 258 #define MIN_OUTSTANDING_COMMANDS 128 259 260 /* ISP request and response entry counts (37-65535) */ 261 #define REQUEST_ENTRY_CNT_2100 128 /* Number of request entries. */ 262 #define REQUEST_ENTRY_CNT_2200 2048 /* Number of request entries. */ 263 #define REQUEST_ENTRY_CNT_24XX 2048 /* Number of request entries. */ 264 #define RESPONSE_ENTRY_CNT_2100 64 /* Number of response entries.*/ 265 #define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/ 266 #define RESPONSE_ENTRY_CNT_MQ 128 /* Number of response entries.*/ 267 #define ATIO_ENTRY_CNT_24XX 4096 /* Number of ATIO entries. */ 268 #define RESPONSE_ENTRY_CNT_FX00 256 /* Number of response entries.*/ 269 270 struct req_que; 271 272 /* 273 * (sd.h is not exported, hence local inclusion) 274 * Data Integrity Field tuple. 275 */ 276 struct sd_dif_tuple { 277 __be16 guard_tag; /* Checksum */ 278 __be16 app_tag; /* Opaque storage */ 279 __be32 ref_tag; /* Target LBA or indirect LBA */ 280 }; 281 282 /* 283 * SCSI Request Block 284 */ 285 struct srb_cmd { 286 struct scsi_cmnd *cmd; /* Linux SCSI command pkt */ 287 uint32_t request_sense_length; 288 uint32_t fw_sense_length; 289 uint8_t *request_sense_ptr; 290 void *ctx; 291 }; 292 293 /* 294 * SRB flag definitions 295 */ 296 #define SRB_DMA_VALID BIT_0 /* Command sent to ISP */ 297 #define SRB_FCP_CMND_DMA_VALID BIT_12 /* DIF: DSD List valid */ 298 #define SRB_CRC_CTX_DMA_VALID BIT_2 /* DIF: context DMA valid */ 299 #define SRB_CRC_PROT_DMA_VALID BIT_4 /* DIF: prot DMA valid */ 300 #define SRB_CRC_CTX_DSD_VALID BIT_5 /* DIF: dsd_list valid */ 301 302 /* To identify if a srb is of T10-CRC type. @sp => srb_t pointer */ 303 #define IS_PROT_IO(sp) (sp->flags & SRB_CRC_CTX_DSD_VALID) 304 305 /* 306 * SRB extensions. 307 */ 308 struct srb_iocb { 309 union { 310 struct { 311 uint16_t flags; 312 #define SRB_LOGIN_RETRIED BIT_0 313 #define SRB_LOGIN_COND_PLOGI BIT_1 314 #define SRB_LOGIN_SKIP_PRLI BIT_2 315 uint16_t data[2]; 316 } logio; 317 struct { 318 /* 319 * Values for flags field below are as 320 * defined in tsk_mgmt_entry struct 321 * for control_flags field in qla_fw.h. 322 */ 323 uint32_t flags; 324 uint32_t lun; 325 uint32_t data; 326 struct completion comp; 327 __le16 comp_status; 328 } tmf; 329 struct { 330 #define SRB_FXDISC_REQ_DMA_VALID BIT_0 331 #define SRB_FXDISC_RESP_DMA_VALID BIT_1 332 #define SRB_FXDISC_REQ_DWRD_VALID BIT_2 333 #define SRB_FXDISC_RSP_DWRD_VALID BIT_3 334 #define FXDISC_TIMEOUT 20 335 uint8_t flags; 336 uint32_t req_len; 337 uint32_t rsp_len; 338 void *req_addr; 339 void *rsp_addr; 340 dma_addr_t req_dma_handle; 341 dma_addr_t rsp_dma_handle; 342 __le32 adapter_id; 343 __le32 adapter_id_hi; 344 __le16 req_func_type; 345 __le32 req_data; 346 __le32 req_data_extra; 347 __le32 result; 348 __le32 seq_number; 349 __le16 fw_flags; 350 struct completion fxiocb_comp; 351 __le32 reserved_0; 352 uint8_t reserved_1; 353 } fxiocb; 354 struct { 355 uint32_t cmd_hndl; 356 __le16 comp_status; 357 struct completion comp; 358 } abt; 359 } u; 360 361 struct timer_list timer; 362 void (*timeout)(void *); 363 }; 364 365 /* Values for srb_ctx type */ 366 #define SRB_LOGIN_CMD 1 367 #define SRB_LOGOUT_CMD 2 368 #define SRB_ELS_CMD_RPT 3 369 #define SRB_ELS_CMD_HST 4 370 #define SRB_CT_CMD 5 371 #define SRB_ADISC_CMD 6 372 #define SRB_TM_CMD 7 373 #define SRB_SCSI_CMD 8 374 #define SRB_BIDI_CMD 9 375 #define SRB_FXIOCB_DCMD 10 376 #define SRB_FXIOCB_BCMD 11 377 #define SRB_ABT_CMD 12 378 379 380 typedef struct srb { 381 atomic_t ref_count; 382 struct fc_port *fcport; 383 uint32_t handle; 384 uint16_t flags; 385 uint16_t type; 386 char *name; 387 int iocbs; 388 union { 389 struct srb_iocb iocb_cmd; 390 struct fc_bsg_job *bsg_job; 391 struct srb_cmd scmd; 392 } u; 393 void (*done)(void *, void *, int); 394 void (*free)(void *, void *); 395 } srb_t; 396 397 #define GET_CMD_SP(sp) (sp->u.scmd.cmd) 398 #define SET_CMD_SP(sp, cmd) (sp->u.scmd.cmd = cmd) 399 #define GET_CMD_CTX_SP(sp) (sp->u.scmd.ctx) 400 401 #define GET_CMD_SENSE_LEN(sp) \ 402 (sp->u.scmd.request_sense_length) 403 #define SET_CMD_SENSE_LEN(sp, len) \ 404 (sp->u.scmd.request_sense_length = len) 405 #define GET_CMD_SENSE_PTR(sp) \ 406 (sp->u.scmd.request_sense_ptr) 407 #define SET_CMD_SENSE_PTR(sp, ptr) \ 408 (sp->u.scmd.request_sense_ptr = ptr) 409 #define GET_FW_SENSE_LEN(sp) \ 410 (sp->u.scmd.fw_sense_length) 411 #define SET_FW_SENSE_LEN(sp, len) \ 412 (sp->u.scmd.fw_sense_length = len) 413 414 struct msg_echo_lb { 415 dma_addr_t send_dma; 416 dma_addr_t rcv_dma; 417 uint16_t req_sg_cnt; 418 uint16_t rsp_sg_cnt; 419 uint16_t options; 420 uint32_t transfer_size; 421 uint32_t iteration_count; 422 }; 423 424 /* 425 * ISP I/O Register Set structure definitions. 426 */ 427 struct device_reg_2xxx { 428 uint16_t flash_address; /* Flash BIOS address */ 429 uint16_t flash_data; /* Flash BIOS data */ 430 uint16_t unused_1[1]; /* Gap */ 431 uint16_t ctrl_status; /* Control/Status */ 432 #define CSR_FLASH_64K_BANK BIT_3 /* Flash upper 64K bank select */ 433 #define CSR_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable */ 434 #define CSR_ISP_SOFT_RESET BIT_0 /* ISP soft reset */ 435 436 uint16_t ictrl; /* Interrupt control */ 437 #define ICR_EN_INT BIT_15 /* ISP enable interrupts. */ 438 #define ICR_EN_RISC BIT_3 /* ISP enable RISC interrupts. */ 439 440 uint16_t istatus; /* Interrupt status */ 441 #define ISR_RISC_INT BIT_3 /* RISC interrupt */ 442 443 uint16_t semaphore; /* Semaphore */ 444 uint16_t nvram; /* NVRAM register. */ 445 #define NVR_DESELECT 0 446 #define NVR_BUSY BIT_15 447 #define NVR_WRT_ENABLE BIT_14 /* Write enable */ 448 #define NVR_PR_ENABLE BIT_13 /* Protection register enable */ 449 #define NVR_DATA_IN BIT_3 450 #define NVR_DATA_OUT BIT_2 451 #define NVR_SELECT BIT_1 452 #define NVR_CLOCK BIT_0 453 454 #define NVR_WAIT_CNT 20000 455 456 union { 457 struct { 458 uint16_t mailbox0; 459 uint16_t mailbox1; 460 uint16_t mailbox2; 461 uint16_t mailbox3; 462 uint16_t mailbox4; 463 uint16_t mailbox5; 464 uint16_t mailbox6; 465 uint16_t mailbox7; 466 uint16_t unused_2[59]; /* Gap */ 467 } __attribute__((packed)) isp2100; 468 struct { 469 /* Request Queue */ 470 uint16_t req_q_in; /* In-Pointer */ 471 uint16_t req_q_out; /* Out-Pointer */ 472 /* Response Queue */ 473 uint16_t rsp_q_in; /* In-Pointer */ 474 uint16_t rsp_q_out; /* Out-Pointer */ 475 476 /* RISC to Host Status */ 477 uint32_t host_status; 478 #define HSR_RISC_INT BIT_15 /* RISC interrupt */ 479 #define HSR_RISC_PAUSED BIT_8 /* RISC Paused */ 480 481 /* Host to Host Semaphore */ 482 uint16_t host_semaphore; 483 uint16_t unused_3[17]; /* Gap */ 484 uint16_t mailbox0; 485 uint16_t mailbox1; 486 uint16_t mailbox2; 487 uint16_t mailbox3; 488 uint16_t mailbox4; 489 uint16_t mailbox5; 490 uint16_t mailbox6; 491 uint16_t mailbox7; 492 uint16_t mailbox8; 493 uint16_t mailbox9; 494 uint16_t mailbox10; 495 uint16_t mailbox11; 496 uint16_t mailbox12; 497 uint16_t mailbox13; 498 uint16_t mailbox14; 499 uint16_t mailbox15; 500 uint16_t mailbox16; 501 uint16_t mailbox17; 502 uint16_t mailbox18; 503 uint16_t mailbox19; 504 uint16_t mailbox20; 505 uint16_t mailbox21; 506 uint16_t mailbox22; 507 uint16_t mailbox23; 508 uint16_t mailbox24; 509 uint16_t mailbox25; 510 uint16_t mailbox26; 511 uint16_t mailbox27; 512 uint16_t mailbox28; 513 uint16_t mailbox29; 514 uint16_t mailbox30; 515 uint16_t mailbox31; 516 uint16_t fb_cmd; 517 uint16_t unused_4[10]; /* Gap */ 518 } __attribute__((packed)) isp2300; 519 } u; 520 521 uint16_t fpm_diag_config; 522 uint16_t unused_5[0x4]; /* Gap */ 523 uint16_t risc_hw; 524 uint16_t unused_5_1; /* Gap */ 525 uint16_t pcr; /* Processor Control Register. */ 526 uint16_t unused_6[0x5]; /* Gap */ 527 uint16_t mctr; /* Memory Configuration and Timing. */ 528 uint16_t unused_7[0x3]; /* Gap */ 529 uint16_t fb_cmd_2100; /* Unused on 23XX */ 530 uint16_t unused_8[0x3]; /* Gap */ 531 uint16_t hccr; /* Host command & control register. */ 532 #define HCCR_HOST_INT BIT_7 /* Host interrupt bit */ 533 #define HCCR_RISC_PAUSE BIT_5 /* Pause mode bit */ 534 /* HCCR commands */ 535 #define HCCR_RESET_RISC 0x1000 /* Reset RISC */ 536 #define HCCR_PAUSE_RISC 0x2000 /* Pause RISC */ 537 #define HCCR_RELEASE_RISC 0x3000 /* Release RISC from reset. */ 538 #define HCCR_SET_HOST_INT 0x5000 /* Set host interrupt */ 539 #define HCCR_CLR_HOST_INT 0x6000 /* Clear HOST interrupt */ 540 #define HCCR_CLR_RISC_INT 0x7000 /* Clear RISC interrupt */ 541 #define HCCR_DISABLE_PARITY_PAUSE 0x4001 /* Disable parity error RISC pause. */ 542 #define HCCR_ENABLE_PARITY 0xA000 /* Enable PARITY interrupt */ 543 544 uint16_t unused_9[5]; /* Gap */ 545 uint16_t gpiod; /* GPIO Data register. */ 546 uint16_t gpioe; /* GPIO Enable register. */ 547 #define GPIO_LED_MASK 0x00C0 548 #define GPIO_LED_GREEN_OFF_AMBER_OFF 0x0000 549 #define GPIO_LED_GREEN_ON_AMBER_OFF 0x0040 550 #define GPIO_LED_GREEN_OFF_AMBER_ON 0x0080 551 #define GPIO_LED_GREEN_ON_AMBER_ON 0x00C0 552 #define GPIO_LED_ALL_OFF 0x0000 553 #define GPIO_LED_RED_ON_OTHER_OFF 0x0001 /* isp2322 */ 554 #define GPIO_LED_RGA_ON 0x00C1 /* isp2322: red green amber */ 555 556 union { 557 struct { 558 uint16_t unused_10[8]; /* Gap */ 559 uint16_t mailbox8; 560 uint16_t mailbox9; 561 uint16_t mailbox10; 562 uint16_t mailbox11; 563 uint16_t mailbox12; 564 uint16_t mailbox13; 565 uint16_t mailbox14; 566 uint16_t mailbox15; 567 uint16_t mailbox16; 568 uint16_t mailbox17; 569 uint16_t mailbox18; 570 uint16_t mailbox19; 571 uint16_t mailbox20; 572 uint16_t mailbox21; 573 uint16_t mailbox22; 574 uint16_t mailbox23; /* Also probe reg. */ 575 } __attribute__((packed)) isp2200; 576 } u_end; 577 }; 578 579 struct device_reg_25xxmq { 580 uint32_t req_q_in; 581 uint32_t req_q_out; 582 uint32_t rsp_q_in; 583 uint32_t rsp_q_out; 584 uint32_t atio_q_in; 585 uint32_t atio_q_out; 586 }; 587 588 589 struct device_reg_fx00 { 590 uint32_t mailbox0; /* 00 */ 591 uint32_t mailbox1; /* 04 */ 592 uint32_t mailbox2; /* 08 */ 593 uint32_t mailbox3; /* 0C */ 594 uint32_t mailbox4; /* 10 */ 595 uint32_t mailbox5; /* 14 */ 596 uint32_t mailbox6; /* 18 */ 597 uint32_t mailbox7; /* 1C */ 598 uint32_t mailbox8; /* 20 */ 599 uint32_t mailbox9; /* 24 */ 600 uint32_t mailbox10; /* 28 */ 601 uint32_t mailbox11; 602 uint32_t mailbox12; 603 uint32_t mailbox13; 604 uint32_t mailbox14; 605 uint32_t mailbox15; 606 uint32_t mailbox16; 607 uint32_t mailbox17; 608 uint32_t mailbox18; 609 uint32_t mailbox19; 610 uint32_t mailbox20; 611 uint32_t mailbox21; 612 uint32_t mailbox22; 613 uint32_t mailbox23; 614 uint32_t mailbox24; 615 uint32_t mailbox25; 616 uint32_t mailbox26; 617 uint32_t mailbox27; 618 uint32_t mailbox28; 619 uint32_t mailbox29; 620 uint32_t mailbox30; 621 uint32_t mailbox31; 622 uint32_t aenmailbox0; 623 uint32_t aenmailbox1; 624 uint32_t aenmailbox2; 625 uint32_t aenmailbox3; 626 uint32_t aenmailbox4; 627 uint32_t aenmailbox5; 628 uint32_t aenmailbox6; 629 uint32_t aenmailbox7; 630 /* Request Queue. */ 631 uint32_t req_q_in; /* A0 - Request Queue In-Pointer */ 632 uint32_t req_q_out; /* A4 - Request Queue Out-Pointer */ 633 /* Response Queue. */ 634 uint32_t rsp_q_in; /* A8 - Response Queue In-Pointer */ 635 uint32_t rsp_q_out; /* AC - Response Queue Out-Pointer */ 636 /* Init values shadowed on FW Up Event */ 637 uint32_t initval0; /* B0 */ 638 uint32_t initval1; /* B4 */ 639 uint32_t initval2; /* B8 */ 640 uint32_t initval3; /* BC */ 641 uint32_t initval4; /* C0 */ 642 uint32_t initval5; /* C4 */ 643 uint32_t initval6; /* C8 */ 644 uint32_t initval7; /* CC */ 645 uint32_t fwheartbeat; /* D0 */ 646 uint32_t pseudoaen; /* D4 */ 647 }; 648 649 650 651 typedef union { 652 struct device_reg_2xxx isp; 653 struct device_reg_24xx isp24; 654 struct device_reg_25xxmq isp25mq; 655 struct device_reg_82xx isp82; 656 struct device_reg_fx00 ispfx00; 657 } __iomem device_reg_t; 658 659 #define ISP_REQ_Q_IN(ha, reg) \ 660 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \ 661 &(reg)->u.isp2100.mailbox4 : \ 662 &(reg)->u.isp2300.req_q_in) 663 #define ISP_REQ_Q_OUT(ha, reg) \ 664 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \ 665 &(reg)->u.isp2100.mailbox4 : \ 666 &(reg)->u.isp2300.req_q_out) 667 #define ISP_RSP_Q_IN(ha, reg) \ 668 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \ 669 &(reg)->u.isp2100.mailbox5 : \ 670 &(reg)->u.isp2300.rsp_q_in) 671 #define ISP_RSP_Q_OUT(ha, reg) \ 672 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \ 673 &(reg)->u.isp2100.mailbox5 : \ 674 &(reg)->u.isp2300.rsp_q_out) 675 676 #define ISP_ATIO_Q_IN(vha) (vha->hw->tgt.atio_q_in) 677 #define ISP_ATIO_Q_OUT(vha) (vha->hw->tgt.atio_q_out) 678 679 #define MAILBOX_REG(ha, reg, num) \ 680 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \ 681 (num < 8 ? \ 682 &(reg)->u.isp2100.mailbox0 + (num) : \ 683 &(reg)->u_end.isp2200.mailbox8 + (num) - 8) : \ 684 &(reg)->u.isp2300.mailbox0 + (num)) 685 #define RD_MAILBOX_REG(ha, reg, num) \ 686 RD_REG_WORD(MAILBOX_REG(ha, reg, num)) 687 #define WRT_MAILBOX_REG(ha, reg, num, data) \ 688 WRT_REG_WORD(MAILBOX_REG(ha, reg, num), data) 689 690 #define FB_CMD_REG(ha, reg) \ 691 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \ 692 &(reg)->fb_cmd_2100 : \ 693 &(reg)->u.isp2300.fb_cmd) 694 #define RD_FB_CMD_REG(ha, reg) \ 695 RD_REG_WORD(FB_CMD_REG(ha, reg)) 696 #define WRT_FB_CMD_REG(ha, reg, data) \ 697 WRT_REG_WORD(FB_CMD_REG(ha, reg), data) 698 699 typedef struct { 700 uint32_t out_mb; /* outbound from driver */ 701 uint32_t in_mb; /* Incoming from RISC */ 702 uint16_t mb[MAILBOX_REGISTER_COUNT]; 703 long buf_size; 704 void *bufp; 705 uint32_t tov; 706 uint8_t flags; 707 #define MBX_DMA_IN BIT_0 708 #define MBX_DMA_OUT BIT_1 709 #define IOCTL_CMD BIT_2 710 } mbx_cmd_t; 711 712 struct mbx_cmd_32 { 713 uint32_t out_mb; /* outbound from driver */ 714 uint32_t in_mb; /* Incoming from RISC */ 715 uint32_t mb[MAILBOX_REGISTER_COUNT]; 716 long buf_size; 717 void *bufp; 718 uint32_t tov; 719 uint8_t flags; 720 #define MBX_DMA_IN BIT_0 721 #define MBX_DMA_OUT BIT_1 722 #define IOCTL_CMD BIT_2 723 }; 724 725 726 #define MBX_TOV_SECONDS 30 727 728 /* 729 * ISP product identification definitions in mailboxes after reset. 730 */ 731 #define PROD_ID_1 0x4953 732 #define PROD_ID_2 0x0000 733 #define PROD_ID_2a 0x5020 734 #define PROD_ID_3 0x2020 735 736 /* 737 * ISP mailbox Self-Test status codes 738 */ 739 #define MBS_FRM_ALIVE 0 /* Firmware Alive. */ 740 #define MBS_CHKSUM_ERR 1 /* Checksum Error. */ 741 #define MBS_BUSY 4 /* Busy. */ 742 743 /* 744 * ISP mailbox command complete status codes 745 */ 746 #define MBS_COMMAND_COMPLETE 0x4000 747 #define MBS_INVALID_COMMAND 0x4001 748 #define MBS_HOST_INTERFACE_ERROR 0x4002 749 #define MBS_TEST_FAILED 0x4003 750 #define MBS_COMMAND_ERROR 0x4005 751 #define MBS_COMMAND_PARAMETER_ERROR 0x4006 752 #define MBS_PORT_ID_USED 0x4007 753 #define MBS_LOOP_ID_USED 0x4008 754 #define MBS_ALL_IDS_IN_USE 0x4009 755 #define MBS_NOT_LOGGED_IN 0x400A 756 #define MBS_LINK_DOWN_ERROR 0x400B 757 #define MBS_DIAG_ECHO_TEST_ERROR 0x400C 758 759 /* 760 * ISP mailbox asynchronous event status codes 761 */ 762 #define MBA_ASYNC_EVENT 0x8000 /* Asynchronous event. */ 763 #define MBA_RESET 0x8001 /* Reset Detected. */ 764 #define MBA_SYSTEM_ERR 0x8002 /* System Error. */ 765 #define MBA_REQ_TRANSFER_ERR 0x8003 /* Request Transfer Error. */ 766 #define MBA_RSP_TRANSFER_ERR 0x8004 /* Response Transfer Error. */ 767 #define MBA_WAKEUP_THRES 0x8005 /* Request Queue Wake-up. */ 768 #define MBA_LIP_OCCURRED 0x8010 /* Loop Initialization Procedure */ 769 /* occurred. */ 770 #define MBA_LOOP_UP 0x8011 /* FC Loop UP. */ 771 #define MBA_LOOP_DOWN 0x8012 /* FC Loop Down. */ 772 #define MBA_LIP_RESET 0x8013 /* LIP reset occurred. */ 773 #define MBA_PORT_UPDATE 0x8014 /* Port Database update. */ 774 #define MBA_RSCN_UPDATE 0x8015 /* Register State Chg Notification. */ 775 #define MBA_LIP_F8 0x8016 /* Received a LIP F8. */ 776 #define MBA_LOOP_INIT_ERR 0x8017 /* Loop Initialization Error. */ 777 #define MBA_FABRIC_AUTH_REQ 0x801b /* Fabric Authentication Required. */ 778 #define MBA_SCSI_COMPLETION 0x8020 /* SCSI Command Complete. */ 779 #define MBA_CTIO_COMPLETION 0x8021 /* CTIO Complete. */ 780 #define MBA_IP_COMPLETION 0x8022 /* IP Transmit Command Complete. */ 781 #define MBA_IP_RECEIVE 0x8023 /* IP Received. */ 782 #define MBA_IP_BROADCAST 0x8024 /* IP Broadcast Received. */ 783 #define MBA_IP_LOW_WATER_MARK 0x8025 /* IP Low Water Mark reached. */ 784 #define MBA_IP_RCV_BUFFER_EMPTY 0x8026 /* IP receive buffer queue empty. */ 785 #define MBA_IP_HDR_DATA_SPLIT 0x8027 /* IP header/data splitting feature */ 786 /* used. */ 787 #define MBA_TRACE_NOTIFICATION 0x8028 /* Trace/Diagnostic notification. */ 788 #define MBA_POINT_TO_POINT 0x8030 /* Point to point mode. */ 789 #define MBA_CMPLT_1_16BIT 0x8031 /* Completion 1 16bit IOSB. */ 790 #define MBA_CMPLT_2_16BIT 0x8032 /* Completion 2 16bit IOSB. */ 791 #define MBA_CMPLT_3_16BIT 0x8033 /* Completion 3 16bit IOSB. */ 792 #define MBA_CMPLT_4_16BIT 0x8034 /* Completion 4 16bit IOSB. */ 793 #define MBA_CMPLT_5_16BIT 0x8035 /* Completion 5 16bit IOSB. */ 794 #define MBA_CHG_IN_CONNECTION 0x8036 /* Change in connection mode. */ 795 #define MBA_RIO_RESPONSE 0x8040 /* RIO response queue update. */ 796 #define MBA_ZIO_RESPONSE 0x8040 /* ZIO response queue update. */ 797 #define MBA_CMPLT_2_32BIT 0x8042 /* Completion 2 32bit IOSB. */ 798 #define MBA_BYPASS_NOTIFICATION 0x8043 /* Auto bypass notification. */ 799 #define MBA_DISCARD_RND_FRAME 0x8048 /* discard RND frame due to error. */ 800 #define MBA_REJECTED_FCP_CMD 0x8049 /* rejected FCP_CMD. */ 801 #define MBA_FW_NOT_STARTED 0x8050 /* Firmware not started */ 802 #define MBA_FW_STARTING 0x8051 /* Firmware starting */ 803 #define MBA_FW_RESTART_CMPLT 0x8060 /* Firmware restart complete */ 804 #define MBA_INIT_REQUIRED 0x8061 /* Initialization required */ 805 #define MBA_SHUTDOWN_REQUESTED 0x8062 /* Shutdown Requested */ 806 #define MBA_FW_INIT_FAILURE 0x8401 /* Firmware initialization failure */ 807 #define MBA_MIRROR_LUN_CHANGE 0x8402 /* Mirror LUN State Change 808 Notification */ 809 #define MBA_FW_POLL_STATE 0x8600 /* Firmware in poll diagnostic state */ 810 #define MBA_FW_RESET_FCT 0x8502 /* Firmware reset factory defaults */ 811 #define MBA_FW_INIT_INPROGRESS 0x8500 /* Firmware boot in progress */ 812 /* 83XX FCoE specific */ 813 #define MBA_IDC_AEN 0x8200 /* FCoE: NIC Core state change AEN */ 814 815 /* Interrupt type codes */ 816 #define INTR_ROM_MB_SUCCESS 0x1 817 #define INTR_ROM_MB_FAILED 0x2 818 #define INTR_MB_SUCCESS 0x10 819 #define INTR_MB_FAILED 0x11 820 #define INTR_ASYNC_EVENT 0x12 821 #define INTR_RSP_QUE_UPDATE 0x13 822 #define INTR_RSP_QUE_UPDATE_83XX 0x14 823 #define INTR_ATIO_QUE_UPDATE 0x1C 824 #define INTR_ATIO_RSP_QUE_UPDATE 0x1D 825 826 /* ISP mailbox loopback echo diagnostic error code */ 827 #define MBS_LB_RESET 0x17 828 /* 829 * Firmware options 1, 2, 3. 830 */ 831 #define FO1_AE_ON_LIPF8 BIT_0 832 #define FO1_AE_ALL_LIP_RESET BIT_1 833 #define FO1_CTIO_RETRY BIT_3 834 #define FO1_DISABLE_LIP_F7_SW BIT_4 835 #define FO1_DISABLE_100MS_LOS_WAIT BIT_5 836 #define FO1_DISABLE_GPIO6_7 BIT_6 /* LED bits */ 837 #define FO1_AE_ON_LOOP_INIT_ERR BIT_7 838 #define FO1_SET_EMPHASIS_SWING BIT_8 839 #define FO1_AE_AUTO_BYPASS BIT_9 840 #define FO1_ENABLE_PURE_IOCB BIT_10 841 #define FO1_AE_PLOGI_RJT BIT_11 842 #define FO1_ENABLE_ABORT_SEQUENCE BIT_12 843 #define FO1_AE_QUEUE_FULL BIT_13 844 845 #define FO2_ENABLE_ATIO_TYPE_3 BIT_0 846 #define FO2_REV_LOOPBACK BIT_1 847 848 #define FO3_ENABLE_EMERG_IOCB BIT_0 849 #define FO3_AE_RND_ERROR BIT_1 850 851 /* 24XX additional firmware options */ 852 #define ADD_FO_COUNT 3 853 #define ADD_FO1_DISABLE_GPIO_LED_CTRL BIT_6 /* LED bits */ 854 #define ADD_FO1_ENABLE_PUREX_IOCB BIT_10 855 856 #define ADD_FO2_ENABLE_SEL_CLS2 BIT_5 857 858 #define ADD_FO3_NO_ABT_ON_LINK_DOWN BIT_14 859 860 /* 861 * ISP mailbox commands 862 */ 863 #define MBC_LOAD_RAM 1 /* Load RAM. */ 864 #define MBC_EXECUTE_FIRMWARE 2 /* Execute firmware. */ 865 #define MBC_READ_RAM_WORD 5 /* Read RAM word. */ 866 #define MBC_MAILBOX_REGISTER_TEST 6 /* Wrap incoming mailboxes */ 867 #define MBC_VERIFY_CHECKSUM 7 /* Verify checksum. */ 868 #define MBC_GET_FIRMWARE_VERSION 8 /* Get firmware revision. */ 869 #define MBC_LOAD_RISC_RAM 9 /* Load RAM command. */ 870 #define MBC_DUMP_RISC_RAM 0xa /* Dump RAM command. */ 871 #define MBC_LOAD_RISC_RAM_EXTENDED 0xb /* Load RAM extended. */ 872 #define MBC_DUMP_RISC_RAM_EXTENDED 0xc /* Dump RAM extended. */ 873 #define MBC_WRITE_RAM_WORD_EXTENDED 0xd /* Write RAM word extended */ 874 #define MBC_READ_RAM_EXTENDED 0xf /* Read RAM extended. */ 875 #define MBC_IOCB_COMMAND 0x12 /* Execute IOCB command. */ 876 #define MBC_STOP_FIRMWARE 0x14 /* Stop firmware. */ 877 #define MBC_ABORT_COMMAND 0x15 /* Abort IOCB command. */ 878 #define MBC_ABORT_DEVICE 0x16 /* Abort device (ID/LUN). */ 879 #define MBC_ABORT_TARGET 0x17 /* Abort target (ID). */ 880 #define MBC_RESET 0x18 /* Reset. */ 881 #define MBC_GET_ADAPTER_LOOP_ID 0x20 /* Get loop id of ISP2200. */ 882 #define MBC_GET_RETRY_COUNT 0x22 /* Get f/w retry cnt/delay. */ 883 #define MBC_DISABLE_VI 0x24 /* Disable VI operation. */ 884 #define MBC_ENABLE_VI 0x25 /* Enable VI operation. */ 885 #define MBC_GET_FIRMWARE_OPTION 0x28 /* Get Firmware Options. */ 886 #define MBC_SET_FIRMWARE_OPTION 0x38 /* Set Firmware Options. */ 887 #define MBC_LOOP_PORT_BYPASS 0x40 /* Loop Port Bypass. */ 888 #define MBC_LOOP_PORT_ENABLE 0x41 /* Loop Port Enable. */ 889 #define MBC_GET_RESOURCE_COUNTS 0x42 /* Get Resource Counts. */ 890 #define MBC_NON_PARTICIPATE 0x43 /* Non-Participating Mode. */ 891 #define MBC_DIAGNOSTIC_ECHO 0x44 /* Diagnostic echo. */ 892 #define MBC_DIAGNOSTIC_LOOP_BACK 0x45 /* Diagnostic loop back. */ 893 #define MBC_ONLINE_SELF_TEST 0x46 /* Online self-test. */ 894 #define MBC_ENHANCED_GET_PORT_DATABASE 0x47 /* Get port database + login */ 895 #define MBC_CONFIGURE_VF 0x4b /* Configure VFs */ 896 #define MBC_RESET_LINK_STATUS 0x52 /* Reset Link Error Status */ 897 #define MBC_IOCB_COMMAND_A64 0x54 /* Execute IOCB command (64) */ 898 #define MBC_PORT_LOGOUT 0x56 /* Port Logout request */ 899 #define MBC_SEND_RNID_ELS 0x57 /* Send RNID ELS request */ 900 #define MBC_SET_RNID_PARAMS 0x59 /* Set RNID parameters */ 901 #define MBC_GET_RNID_PARAMS 0x5a /* Get RNID parameters */ 902 #define MBC_DATA_RATE 0x5d /* Data Rate */ 903 #define MBC_INITIALIZE_FIRMWARE 0x60 /* Initialize firmware */ 904 #define MBC_INITIATE_LIP 0x62 /* Initiate Loop */ 905 /* Initialization Procedure */ 906 #define MBC_GET_FC_AL_POSITION_MAP 0x63 /* Get FC_AL Position Map. */ 907 #define MBC_GET_PORT_DATABASE 0x64 /* Get Port Database. */ 908 #define MBC_CLEAR_ACA 0x65 /* Clear ACA. */ 909 #define MBC_TARGET_RESET 0x66 /* Target Reset. */ 910 #define MBC_CLEAR_TASK_SET 0x67 /* Clear Task Set. */ 911 #define MBC_ABORT_TASK_SET 0x68 /* Abort Task Set. */ 912 #define MBC_GET_FIRMWARE_STATE 0x69 /* Get firmware state. */ 913 #define MBC_GET_PORT_NAME 0x6a /* Get port name. */ 914 #define MBC_GET_LINK_STATUS 0x6b /* Get port link status. */ 915 #define MBC_LIP_RESET 0x6c /* LIP reset. */ 916 #define MBC_SEND_SNS_COMMAND 0x6e /* Send Simple Name Server */ 917 /* commandd. */ 918 #define MBC_LOGIN_FABRIC_PORT 0x6f /* Login fabric port. */ 919 #define MBC_SEND_CHANGE_REQUEST 0x70 /* Send Change Request. */ 920 #define MBC_LOGOUT_FABRIC_PORT 0x71 /* Logout fabric port. */ 921 #define MBC_LIP_FULL_LOGIN 0x72 /* Full login LIP. */ 922 #define MBC_LOGIN_LOOP_PORT 0x74 /* Login Loop Port. */ 923 #define MBC_PORT_NODE_NAME_LIST 0x75 /* Get port/node name list. */ 924 #define MBC_INITIALIZE_RECEIVE_QUEUE 0x77 /* Initialize receive queue */ 925 #define MBC_UNLOAD_IP 0x79 /* Shutdown IP */ 926 #define MBC_GET_ID_LIST 0x7C /* Get Port ID list. */ 927 #define MBC_SEND_LFA_COMMAND 0x7D /* Send Loop Fabric Address */ 928 #define MBC_LUN_RESET 0x7E /* Send LUN reset */ 929 930 /* 931 * all the Mt. Rainier mailbox command codes that clash with FC/FCoE ones 932 * should be defined with MBC_MR_* 933 */ 934 #define MBC_MR_DRV_SHUTDOWN 0x6A 935 936 /* 937 * ISP24xx mailbox commands 938 */ 939 #define MBC_WRITE_SERDES 0x3 /* Write serdes word. */ 940 #define MBC_READ_SERDES 0x4 /* Read serdes word. */ 941 #define MBC_LOAD_DUMP_MPI_RAM 0x5 /* Load/Dump MPI RAM. */ 942 #define MBC_SERDES_PARAMS 0x10 /* Serdes Tx Parameters. */ 943 #define MBC_GET_IOCB_STATUS 0x12 /* Get IOCB status command. */ 944 #define MBC_PORT_PARAMS 0x1A /* Port iDMA Parameters. */ 945 #define MBC_GET_TIMEOUT_PARAMS 0x22 /* Get FW timeouts. */ 946 #define MBC_TRACE_CONTROL 0x27 /* Trace control command. */ 947 #define MBC_GEN_SYSTEM_ERROR 0x2a /* Generate System Error. */ 948 #define MBC_WRITE_SFP 0x30 /* Write SFP Data. */ 949 #define MBC_READ_SFP 0x31 /* Read SFP Data. */ 950 #define MBC_SET_TIMEOUT_PARAMS 0x32 /* Set FW timeouts. */ 951 #define MBC_MID_INITIALIZE_FIRMWARE 0x48 /* MID Initialize firmware. */ 952 #define MBC_MID_GET_VP_DATABASE 0x49 /* MID Get VP Database. */ 953 #define MBC_MID_GET_VP_ENTRY 0x4a /* MID Get VP Entry. */ 954 #define MBC_HOST_MEMORY_COPY 0x53 /* Host Memory Copy. */ 955 #define MBC_SEND_RNFT_ELS 0x5e /* Send RNFT ELS request */ 956 #define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */ 957 #define MBC_LINK_INITIALIZATION 0x72 /* Do link initialization. */ 958 #define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */ 959 #define MBC_PORT_RESET 0x120 /* Port Reset */ 960 #define MBC_SET_PORT_CONFIG 0x122 /* Set port configuration */ 961 #define MBC_GET_PORT_CONFIG 0x123 /* Get port configuration */ 962 963 /* 964 * ISP81xx mailbox commands 965 */ 966 #define MBC_WRITE_MPI_REGISTER 0x01 /* Write MPI Register. */ 967 968 /* 969 * ISP8044 mailbox commands 970 */ 971 #define MBC_SET_GET_ETH_SERDES_REG 0x150 972 #define HCS_WRITE_SERDES 0x3 973 #define HCS_READ_SERDES 0x4 974 975 /* Firmware return data sizes */ 976 #define FCAL_MAP_SIZE 128 977 978 /* Mailbox bit definitions for out_mb and in_mb */ 979 #define MBX_31 BIT_31 980 #define MBX_30 BIT_30 981 #define MBX_29 BIT_29 982 #define MBX_28 BIT_28 983 #define MBX_27 BIT_27 984 #define MBX_26 BIT_26 985 #define MBX_25 BIT_25 986 #define MBX_24 BIT_24 987 #define MBX_23 BIT_23 988 #define MBX_22 BIT_22 989 #define MBX_21 BIT_21 990 #define MBX_20 BIT_20 991 #define MBX_19 BIT_19 992 #define MBX_18 BIT_18 993 #define MBX_17 BIT_17 994 #define MBX_16 BIT_16 995 #define MBX_15 BIT_15 996 #define MBX_14 BIT_14 997 #define MBX_13 BIT_13 998 #define MBX_12 BIT_12 999 #define MBX_11 BIT_11 1000 #define MBX_10 BIT_10 1001 #define MBX_9 BIT_9 1002 #define MBX_8 BIT_8 1003 #define MBX_7 BIT_7 1004 #define MBX_6 BIT_6 1005 #define MBX_5 BIT_5 1006 #define MBX_4 BIT_4 1007 #define MBX_3 BIT_3 1008 #define MBX_2 BIT_2 1009 #define MBX_1 BIT_1 1010 #define MBX_0 BIT_0 1011 1012 #define RNID_TYPE_SET_VERSION 0x9 1013 #define RNID_TYPE_ASIC_TEMP 0xC 1014 1015 /* 1016 * Firmware state codes from get firmware state mailbox command 1017 */ 1018 #define FSTATE_CONFIG_WAIT 0 1019 #define FSTATE_WAIT_AL_PA 1 1020 #define FSTATE_WAIT_LOGIN 2 1021 #define FSTATE_READY 3 1022 #define FSTATE_LOSS_OF_SYNC 4 1023 #define FSTATE_ERROR 5 1024 #define FSTATE_REINIT 6 1025 #define FSTATE_NON_PART 7 1026 1027 #define FSTATE_CONFIG_CORRECT 0 1028 #define FSTATE_P2P_RCV_LIP 1 1029 #define FSTATE_P2P_CHOOSE_LOOP 2 1030 #define FSTATE_P2P_RCV_UNIDEN_LIP 3 1031 #define FSTATE_FATAL_ERROR 4 1032 #define FSTATE_LOOP_BACK_CONN 5 1033 1034 /* 1035 * Port Database structure definition 1036 * Little endian except where noted. 1037 */ 1038 #define PORT_DATABASE_SIZE 128 /* bytes */ 1039 typedef struct { 1040 uint8_t options; 1041 uint8_t control; 1042 uint8_t master_state; 1043 uint8_t slave_state; 1044 uint8_t reserved[2]; 1045 uint8_t hard_address; 1046 uint8_t reserved_1; 1047 uint8_t port_id[4]; 1048 uint8_t node_name[WWN_SIZE]; 1049 uint8_t port_name[WWN_SIZE]; 1050 uint16_t execution_throttle; 1051 uint16_t execution_count; 1052 uint8_t reset_count; 1053 uint8_t reserved_2; 1054 uint16_t resource_allocation; 1055 uint16_t current_allocation; 1056 uint16_t queue_head; 1057 uint16_t queue_tail; 1058 uint16_t transmit_execution_list_next; 1059 uint16_t transmit_execution_list_previous; 1060 uint16_t common_features; 1061 uint16_t total_concurrent_sequences; 1062 uint16_t RO_by_information_category; 1063 uint8_t recipient; 1064 uint8_t initiator; 1065 uint16_t receive_data_size; 1066 uint16_t concurrent_sequences; 1067 uint16_t open_sequences_per_exchange; 1068 uint16_t lun_abort_flags; 1069 uint16_t lun_stop_flags; 1070 uint16_t stop_queue_head; 1071 uint16_t stop_queue_tail; 1072 uint16_t port_retry_timer; 1073 uint16_t next_sequence_id; 1074 uint16_t frame_count; 1075 uint16_t PRLI_payload_length; 1076 uint8_t prli_svc_param_word_0[2]; /* Big endian */ 1077 /* Bits 15-0 of word 0 */ 1078 uint8_t prli_svc_param_word_3[2]; /* Big endian */ 1079 /* Bits 15-0 of word 3 */ 1080 uint16_t loop_id; 1081 uint16_t extended_lun_info_list_pointer; 1082 uint16_t extended_lun_stop_list_pointer; 1083 } port_database_t; 1084 1085 /* 1086 * Port database slave/master states 1087 */ 1088 #define PD_STATE_DISCOVERY 0 1089 #define PD_STATE_WAIT_DISCOVERY_ACK 1 1090 #define PD_STATE_PORT_LOGIN 2 1091 #define PD_STATE_WAIT_PORT_LOGIN_ACK 3 1092 #define PD_STATE_PROCESS_LOGIN 4 1093 #define PD_STATE_WAIT_PROCESS_LOGIN_ACK 5 1094 #define PD_STATE_PORT_LOGGED_IN 6 1095 #define PD_STATE_PORT_UNAVAILABLE 7 1096 #define PD_STATE_PROCESS_LOGOUT 8 1097 #define PD_STATE_WAIT_PROCESS_LOGOUT_ACK 9 1098 #define PD_STATE_PORT_LOGOUT 10 1099 #define PD_STATE_WAIT_PORT_LOGOUT_ACK 11 1100 1101 1102 #define QLA_ZIO_MODE_6 (BIT_2 | BIT_1) 1103 #define QLA_ZIO_DISABLED 0 1104 #define QLA_ZIO_DEFAULT_TIMER 2 1105 1106 /* 1107 * ISP Initialization Control Block. 1108 * Little endian except where noted. 1109 */ 1110 #define ICB_VERSION 1 1111 typedef struct { 1112 uint8_t version; 1113 uint8_t reserved_1; 1114 1115 /* 1116 * LSB BIT 0 = Enable Hard Loop Id 1117 * LSB BIT 1 = Enable Fairness 1118 * LSB BIT 2 = Enable Full-Duplex 1119 * LSB BIT 3 = Enable Fast Posting 1120 * LSB BIT 4 = Enable Target Mode 1121 * LSB BIT 5 = Disable Initiator Mode 1122 * LSB BIT 6 = Enable ADISC 1123 * LSB BIT 7 = Enable Target Inquiry Data 1124 * 1125 * MSB BIT 0 = Enable PDBC Notify 1126 * MSB BIT 1 = Non Participating LIP 1127 * MSB BIT 2 = Descending Loop ID Search 1128 * MSB BIT 3 = Acquire Loop ID in LIPA 1129 * MSB BIT 4 = Stop PortQ on Full Status 1130 * MSB BIT 5 = Full Login after LIP 1131 * MSB BIT 6 = Node Name Option 1132 * MSB BIT 7 = Ext IFWCB enable bit 1133 */ 1134 uint8_t firmware_options[2]; 1135 1136 uint16_t frame_payload_size; 1137 uint16_t max_iocb_allocation; 1138 uint16_t execution_throttle; 1139 uint8_t retry_count; 1140 uint8_t retry_delay; /* unused */ 1141 uint8_t port_name[WWN_SIZE]; /* Big endian. */ 1142 uint16_t hard_address; 1143 uint8_t inquiry_data; 1144 uint8_t login_timeout; 1145 uint8_t node_name[WWN_SIZE]; /* Big endian. */ 1146 1147 uint16_t request_q_outpointer; 1148 uint16_t response_q_inpointer; 1149 uint16_t request_q_length; 1150 uint16_t response_q_length; 1151 uint32_t request_q_address[2]; 1152 uint32_t response_q_address[2]; 1153 1154 uint16_t lun_enables; 1155 uint8_t command_resource_count; 1156 uint8_t immediate_notify_resource_count; 1157 uint16_t timeout; 1158 uint8_t reserved_2[2]; 1159 1160 /* 1161 * LSB BIT 0 = Timer Operation mode bit 0 1162 * LSB BIT 1 = Timer Operation mode bit 1 1163 * LSB BIT 2 = Timer Operation mode bit 2 1164 * LSB BIT 3 = Timer Operation mode bit 3 1165 * LSB BIT 4 = Init Config Mode bit 0 1166 * LSB BIT 5 = Init Config Mode bit 1 1167 * LSB BIT 6 = Init Config Mode bit 2 1168 * LSB BIT 7 = Enable Non part on LIHA failure 1169 * 1170 * MSB BIT 0 = Enable class 2 1171 * MSB BIT 1 = Enable ACK0 1172 * MSB BIT 2 = 1173 * MSB BIT 3 = 1174 * MSB BIT 4 = FC Tape Enable 1175 * MSB BIT 5 = Enable FC Confirm 1176 * MSB BIT 6 = Enable command queuing in target mode 1177 * MSB BIT 7 = No Logo On Link Down 1178 */ 1179 uint8_t add_firmware_options[2]; 1180 1181 uint8_t response_accumulation_timer; 1182 uint8_t interrupt_delay_timer; 1183 1184 /* 1185 * LSB BIT 0 = Enable Read xfr_rdy 1186 * LSB BIT 1 = Soft ID only 1187 * LSB BIT 2 = 1188 * LSB BIT 3 = 1189 * LSB BIT 4 = FCP RSP Payload [0] 1190 * LSB BIT 5 = FCP RSP Payload [1] / Sbus enable - 2200 1191 * LSB BIT 6 = Enable Out-of-Order frame handling 1192 * LSB BIT 7 = Disable Automatic PLOGI on Local Loop 1193 * 1194 * MSB BIT 0 = Sbus enable - 2300 1195 * MSB BIT 1 = 1196 * MSB BIT 2 = 1197 * MSB BIT 3 = 1198 * MSB BIT 4 = LED mode 1199 * MSB BIT 5 = enable 50 ohm termination 1200 * MSB BIT 6 = Data Rate (2300 only) 1201 * MSB BIT 7 = Data Rate (2300 only) 1202 */ 1203 uint8_t special_options[2]; 1204 1205 uint8_t reserved_3[26]; 1206 } init_cb_t; 1207 1208 /* 1209 * Get Link Status mailbox command return buffer. 1210 */ 1211 #define GLSO_SEND_RPS BIT_0 1212 #define GLSO_USE_DID BIT_3 1213 1214 struct link_statistics { 1215 uint32_t link_fail_cnt; 1216 uint32_t loss_sync_cnt; 1217 uint32_t loss_sig_cnt; 1218 uint32_t prim_seq_err_cnt; 1219 uint32_t inval_xmit_word_cnt; 1220 uint32_t inval_crc_cnt; 1221 uint32_t lip_cnt; 1222 uint32_t unused1[0x1a]; 1223 uint32_t tx_frames; 1224 uint32_t rx_frames; 1225 uint32_t discarded_frames; 1226 uint32_t dropped_frames; 1227 uint32_t unused2[1]; 1228 uint32_t nos_rcvd; 1229 }; 1230 1231 /* 1232 * NVRAM Command values. 1233 */ 1234 #define NV_START_BIT BIT_2 1235 #define NV_WRITE_OP (BIT_26+BIT_24) 1236 #define NV_READ_OP (BIT_26+BIT_25) 1237 #define NV_ERASE_OP (BIT_26+BIT_25+BIT_24) 1238 #define NV_MASK_OP (BIT_26+BIT_25+BIT_24) 1239 #define NV_DELAY_COUNT 10 1240 1241 /* 1242 * QLogic ISP2100, ISP2200 and ISP2300 NVRAM structure definition. 1243 */ 1244 typedef struct { 1245 /* 1246 * NVRAM header 1247 */ 1248 uint8_t id[4]; 1249 uint8_t nvram_version; 1250 uint8_t reserved_0; 1251 1252 /* 1253 * NVRAM RISC parameter block 1254 */ 1255 uint8_t parameter_block_version; 1256 uint8_t reserved_1; 1257 1258 /* 1259 * LSB BIT 0 = Enable Hard Loop Id 1260 * LSB BIT 1 = Enable Fairness 1261 * LSB BIT 2 = Enable Full-Duplex 1262 * LSB BIT 3 = Enable Fast Posting 1263 * LSB BIT 4 = Enable Target Mode 1264 * LSB BIT 5 = Disable Initiator Mode 1265 * LSB BIT 6 = Enable ADISC 1266 * LSB BIT 7 = Enable Target Inquiry Data 1267 * 1268 * MSB BIT 0 = Enable PDBC Notify 1269 * MSB BIT 1 = Non Participating LIP 1270 * MSB BIT 2 = Descending Loop ID Search 1271 * MSB BIT 3 = Acquire Loop ID in LIPA 1272 * MSB BIT 4 = Stop PortQ on Full Status 1273 * MSB BIT 5 = Full Login after LIP 1274 * MSB BIT 6 = Node Name Option 1275 * MSB BIT 7 = Ext IFWCB enable bit 1276 */ 1277 uint8_t firmware_options[2]; 1278 1279 uint16_t frame_payload_size; 1280 uint16_t max_iocb_allocation; 1281 uint16_t execution_throttle; 1282 uint8_t retry_count; 1283 uint8_t retry_delay; /* unused */ 1284 uint8_t port_name[WWN_SIZE]; /* Big endian. */ 1285 uint16_t hard_address; 1286 uint8_t inquiry_data; 1287 uint8_t login_timeout; 1288 uint8_t node_name[WWN_SIZE]; /* Big endian. */ 1289 1290 /* 1291 * LSB BIT 0 = Timer Operation mode bit 0 1292 * LSB BIT 1 = Timer Operation mode bit 1 1293 * LSB BIT 2 = Timer Operation mode bit 2 1294 * LSB BIT 3 = Timer Operation mode bit 3 1295 * LSB BIT 4 = Init Config Mode bit 0 1296 * LSB BIT 5 = Init Config Mode bit 1 1297 * LSB BIT 6 = Init Config Mode bit 2 1298 * LSB BIT 7 = Enable Non part on LIHA failure 1299 * 1300 * MSB BIT 0 = Enable class 2 1301 * MSB BIT 1 = Enable ACK0 1302 * MSB BIT 2 = 1303 * MSB BIT 3 = 1304 * MSB BIT 4 = FC Tape Enable 1305 * MSB BIT 5 = Enable FC Confirm 1306 * MSB BIT 6 = Enable command queuing in target mode 1307 * MSB BIT 7 = No Logo On Link Down 1308 */ 1309 uint8_t add_firmware_options[2]; 1310 1311 uint8_t response_accumulation_timer; 1312 uint8_t interrupt_delay_timer; 1313 1314 /* 1315 * LSB BIT 0 = Enable Read xfr_rdy 1316 * LSB BIT 1 = Soft ID only 1317 * LSB BIT 2 = 1318 * LSB BIT 3 = 1319 * LSB BIT 4 = FCP RSP Payload [0] 1320 * LSB BIT 5 = FCP RSP Payload [1] / Sbus enable - 2200 1321 * LSB BIT 6 = Enable Out-of-Order frame handling 1322 * LSB BIT 7 = Disable Automatic PLOGI on Local Loop 1323 * 1324 * MSB BIT 0 = Sbus enable - 2300 1325 * MSB BIT 1 = 1326 * MSB BIT 2 = 1327 * MSB BIT 3 = 1328 * MSB BIT 4 = LED mode 1329 * MSB BIT 5 = enable 50 ohm termination 1330 * MSB BIT 6 = Data Rate (2300 only) 1331 * MSB BIT 7 = Data Rate (2300 only) 1332 */ 1333 uint8_t special_options[2]; 1334 1335 /* Reserved for expanded RISC parameter block */ 1336 uint8_t reserved_2[22]; 1337 1338 /* 1339 * LSB BIT 0 = Tx Sensitivity 1G bit 0 1340 * LSB BIT 1 = Tx Sensitivity 1G bit 1 1341 * LSB BIT 2 = Tx Sensitivity 1G bit 2 1342 * LSB BIT 3 = Tx Sensitivity 1G bit 3 1343 * LSB BIT 4 = Rx Sensitivity 1G bit 0 1344 * LSB BIT 5 = Rx Sensitivity 1G bit 1 1345 * LSB BIT 6 = Rx Sensitivity 1G bit 2 1346 * LSB BIT 7 = Rx Sensitivity 1G bit 3 1347 * 1348 * MSB BIT 0 = Tx Sensitivity 2G bit 0 1349 * MSB BIT 1 = Tx Sensitivity 2G bit 1 1350 * MSB BIT 2 = Tx Sensitivity 2G bit 2 1351 * MSB BIT 3 = Tx Sensitivity 2G bit 3 1352 * MSB BIT 4 = Rx Sensitivity 2G bit 0 1353 * MSB BIT 5 = Rx Sensitivity 2G bit 1 1354 * MSB BIT 6 = Rx Sensitivity 2G bit 2 1355 * MSB BIT 7 = Rx Sensitivity 2G bit 3 1356 * 1357 * LSB BIT 0 = Output Swing 1G bit 0 1358 * LSB BIT 1 = Output Swing 1G bit 1 1359 * LSB BIT 2 = Output Swing 1G bit 2 1360 * LSB BIT 3 = Output Emphasis 1G bit 0 1361 * LSB BIT 4 = Output Emphasis 1G bit 1 1362 * LSB BIT 5 = Output Swing 2G bit 0 1363 * LSB BIT 6 = Output Swing 2G bit 1 1364 * LSB BIT 7 = Output Swing 2G bit 2 1365 * 1366 * MSB BIT 0 = Output Emphasis 2G bit 0 1367 * MSB BIT 1 = Output Emphasis 2G bit 1 1368 * MSB BIT 2 = Output Enable 1369 * MSB BIT 3 = 1370 * MSB BIT 4 = 1371 * MSB BIT 5 = 1372 * MSB BIT 6 = 1373 * MSB BIT 7 = 1374 */ 1375 uint8_t seriallink_options[4]; 1376 1377 /* 1378 * NVRAM host parameter block 1379 * 1380 * LSB BIT 0 = Enable spinup delay 1381 * LSB BIT 1 = Disable BIOS 1382 * LSB BIT 2 = Enable Memory Map BIOS 1383 * LSB BIT 3 = Enable Selectable Boot 1384 * LSB BIT 4 = Disable RISC code load 1385 * LSB BIT 5 = Set cache line size 1 1386 * LSB BIT 6 = PCI Parity Disable 1387 * LSB BIT 7 = Enable extended logging 1388 * 1389 * MSB BIT 0 = Enable 64bit addressing 1390 * MSB BIT 1 = Enable lip reset 1391 * MSB BIT 2 = Enable lip full login 1392 * MSB BIT 3 = Enable target reset 1393 * MSB BIT 4 = Enable database storage 1394 * MSB BIT 5 = Enable cache flush read 1395 * MSB BIT 6 = Enable database load 1396 * MSB BIT 7 = Enable alternate WWN 1397 */ 1398 uint8_t host_p[2]; 1399 1400 uint8_t boot_node_name[WWN_SIZE]; 1401 uint8_t boot_lun_number; 1402 uint8_t reset_delay; 1403 uint8_t port_down_retry_count; 1404 uint8_t boot_id_number; 1405 uint16_t max_luns_per_target; 1406 uint8_t fcode_boot_port_name[WWN_SIZE]; 1407 uint8_t alternate_port_name[WWN_SIZE]; 1408 uint8_t alternate_node_name[WWN_SIZE]; 1409 1410 /* 1411 * BIT 0 = Selective Login 1412 * BIT 1 = Alt-Boot Enable 1413 * BIT 2 = 1414 * BIT 3 = Boot Order List 1415 * BIT 4 = 1416 * BIT 5 = Selective LUN 1417 * BIT 6 = 1418 * BIT 7 = unused 1419 */ 1420 uint8_t efi_parameters; 1421 1422 uint8_t link_down_timeout; 1423 1424 uint8_t adapter_id[16]; 1425 1426 uint8_t alt1_boot_node_name[WWN_SIZE]; 1427 uint16_t alt1_boot_lun_number; 1428 uint8_t alt2_boot_node_name[WWN_SIZE]; 1429 uint16_t alt2_boot_lun_number; 1430 uint8_t alt3_boot_node_name[WWN_SIZE]; 1431 uint16_t alt3_boot_lun_number; 1432 uint8_t alt4_boot_node_name[WWN_SIZE]; 1433 uint16_t alt4_boot_lun_number; 1434 uint8_t alt5_boot_node_name[WWN_SIZE]; 1435 uint16_t alt5_boot_lun_number; 1436 uint8_t alt6_boot_node_name[WWN_SIZE]; 1437 uint16_t alt6_boot_lun_number; 1438 uint8_t alt7_boot_node_name[WWN_SIZE]; 1439 uint16_t alt7_boot_lun_number; 1440 1441 uint8_t reserved_3[2]; 1442 1443 /* Offset 200-215 : Model Number */ 1444 uint8_t model_number[16]; 1445 1446 /* OEM related items */ 1447 uint8_t oem_specific[16]; 1448 1449 /* 1450 * NVRAM Adapter Features offset 232-239 1451 * 1452 * LSB BIT 0 = External GBIC 1453 * LSB BIT 1 = Risc RAM parity 1454 * LSB BIT 2 = Buffer Plus Module 1455 * LSB BIT 3 = Multi Chip Adapter 1456 * LSB BIT 4 = Internal connector 1457 * LSB BIT 5 = 1458 * LSB BIT 6 = 1459 * LSB BIT 7 = 1460 * 1461 * MSB BIT 0 = 1462 * MSB BIT 1 = 1463 * MSB BIT 2 = 1464 * MSB BIT 3 = 1465 * MSB BIT 4 = 1466 * MSB BIT 5 = 1467 * MSB BIT 6 = 1468 * MSB BIT 7 = 1469 */ 1470 uint8_t adapter_features[2]; 1471 1472 uint8_t reserved_4[16]; 1473 1474 /* Subsystem vendor ID for ISP2200 */ 1475 uint16_t subsystem_vendor_id_2200; 1476 1477 /* Subsystem device ID for ISP2200 */ 1478 uint16_t subsystem_device_id_2200; 1479 1480 uint8_t reserved_5; 1481 uint8_t checksum; 1482 } nvram_t; 1483 1484 /* 1485 * ISP queue - response queue entry definition. 1486 */ 1487 typedef struct { 1488 uint8_t entry_type; /* Entry type. */ 1489 uint8_t entry_count; /* Entry count. */ 1490 uint8_t sys_define; /* System defined. */ 1491 uint8_t entry_status; /* Entry Status. */ 1492 uint32_t handle; /* System defined handle */ 1493 uint8_t data[52]; 1494 uint32_t signature; 1495 #define RESPONSE_PROCESSED 0xDEADDEAD /* Signature */ 1496 } response_t; 1497 1498 /* 1499 * ISP queue - ATIO queue entry definition. 1500 */ 1501 struct atio { 1502 uint8_t entry_type; /* Entry type. */ 1503 uint8_t entry_count; /* Entry count. */ 1504 uint8_t data[58]; 1505 uint32_t signature; 1506 #define ATIO_PROCESSED 0xDEADDEAD /* Signature */ 1507 }; 1508 1509 typedef union { 1510 uint16_t extended; 1511 struct { 1512 uint8_t reserved; 1513 uint8_t standard; 1514 } id; 1515 } target_id_t; 1516 1517 #define SET_TARGET_ID(ha, to, from) \ 1518 do { \ 1519 if (HAS_EXTENDED_IDS(ha)) \ 1520 to.extended = cpu_to_le16(from); \ 1521 else \ 1522 to.id.standard = (uint8_t)from; \ 1523 } while (0) 1524 1525 /* 1526 * ISP queue - command entry structure definition. 1527 */ 1528 #define COMMAND_TYPE 0x11 /* Command entry */ 1529 typedef struct { 1530 uint8_t entry_type; /* Entry type. */ 1531 uint8_t entry_count; /* Entry count. */ 1532 uint8_t sys_define; /* System defined. */ 1533 uint8_t entry_status; /* Entry Status. */ 1534 uint32_t handle; /* System handle. */ 1535 target_id_t target; /* SCSI ID */ 1536 uint16_t lun; /* SCSI LUN */ 1537 uint16_t control_flags; /* Control flags. */ 1538 #define CF_WRITE BIT_6 1539 #define CF_READ BIT_5 1540 #define CF_SIMPLE_TAG BIT_3 1541 #define CF_ORDERED_TAG BIT_2 1542 #define CF_HEAD_TAG BIT_1 1543 uint16_t reserved_1; 1544 uint16_t timeout; /* Command timeout. */ 1545 uint16_t dseg_count; /* Data segment count. */ 1546 uint8_t scsi_cdb[MAX_CMDSZ]; /* SCSI command words. */ 1547 uint32_t byte_count; /* Total byte count. */ 1548 uint32_t dseg_0_address; /* Data segment 0 address. */ 1549 uint32_t dseg_0_length; /* Data segment 0 length. */ 1550 uint32_t dseg_1_address; /* Data segment 1 address. */ 1551 uint32_t dseg_1_length; /* Data segment 1 length. */ 1552 uint32_t dseg_2_address; /* Data segment 2 address. */ 1553 uint32_t dseg_2_length; /* Data segment 2 length. */ 1554 } cmd_entry_t; 1555 1556 /* 1557 * ISP queue - 64-Bit addressing, command entry structure definition. 1558 */ 1559 #define COMMAND_A64_TYPE 0x19 /* Command A64 entry */ 1560 typedef struct { 1561 uint8_t entry_type; /* Entry type. */ 1562 uint8_t entry_count; /* Entry count. */ 1563 uint8_t sys_define; /* System defined. */ 1564 uint8_t entry_status; /* Entry Status. */ 1565 uint32_t handle; /* System handle. */ 1566 target_id_t target; /* SCSI ID */ 1567 uint16_t lun; /* SCSI LUN */ 1568 uint16_t control_flags; /* Control flags. */ 1569 uint16_t reserved_1; 1570 uint16_t timeout; /* Command timeout. */ 1571 uint16_t dseg_count; /* Data segment count. */ 1572 uint8_t scsi_cdb[MAX_CMDSZ]; /* SCSI command words. */ 1573 uint32_t byte_count; /* Total byte count. */ 1574 uint32_t dseg_0_address[2]; /* Data segment 0 address. */ 1575 uint32_t dseg_0_length; /* Data segment 0 length. */ 1576 uint32_t dseg_1_address[2]; /* Data segment 1 address. */ 1577 uint32_t dseg_1_length; /* Data segment 1 length. */ 1578 } cmd_a64_entry_t, request_t; 1579 1580 /* 1581 * ISP queue - continuation entry structure definition. 1582 */ 1583 #define CONTINUE_TYPE 0x02 /* Continuation entry. */ 1584 typedef struct { 1585 uint8_t entry_type; /* Entry type. */ 1586 uint8_t entry_count; /* Entry count. */ 1587 uint8_t sys_define; /* System defined. */ 1588 uint8_t entry_status; /* Entry Status. */ 1589 uint32_t reserved; 1590 uint32_t dseg_0_address; /* Data segment 0 address. */ 1591 uint32_t dseg_0_length; /* Data segment 0 length. */ 1592 uint32_t dseg_1_address; /* Data segment 1 address. */ 1593 uint32_t dseg_1_length; /* Data segment 1 length. */ 1594 uint32_t dseg_2_address; /* Data segment 2 address. */ 1595 uint32_t dseg_2_length; /* Data segment 2 length. */ 1596 uint32_t dseg_3_address; /* Data segment 3 address. */ 1597 uint32_t dseg_3_length; /* Data segment 3 length. */ 1598 uint32_t dseg_4_address; /* Data segment 4 address. */ 1599 uint32_t dseg_4_length; /* Data segment 4 length. */ 1600 uint32_t dseg_5_address; /* Data segment 5 address. */ 1601 uint32_t dseg_5_length; /* Data segment 5 length. */ 1602 uint32_t dseg_6_address; /* Data segment 6 address. */ 1603 uint32_t dseg_6_length; /* Data segment 6 length. */ 1604 } cont_entry_t; 1605 1606 /* 1607 * ISP queue - 64-Bit addressing, continuation entry structure definition. 1608 */ 1609 #define CONTINUE_A64_TYPE 0x0A /* Continuation A64 entry. */ 1610 typedef struct { 1611 uint8_t entry_type; /* Entry type. */ 1612 uint8_t entry_count; /* Entry count. */ 1613 uint8_t sys_define; /* System defined. */ 1614 uint8_t entry_status; /* Entry Status. */ 1615 uint32_t dseg_0_address[2]; /* Data segment 0 address. */ 1616 uint32_t dseg_0_length; /* Data segment 0 length. */ 1617 uint32_t dseg_1_address[2]; /* Data segment 1 address. */ 1618 uint32_t dseg_1_length; /* Data segment 1 length. */ 1619 uint32_t dseg_2_address [2]; /* Data segment 2 address. */ 1620 uint32_t dseg_2_length; /* Data segment 2 length. */ 1621 uint32_t dseg_3_address[2]; /* Data segment 3 address. */ 1622 uint32_t dseg_3_length; /* Data segment 3 length. */ 1623 uint32_t dseg_4_address[2]; /* Data segment 4 address. */ 1624 uint32_t dseg_4_length; /* Data segment 4 length. */ 1625 } cont_a64_entry_t; 1626 1627 #define PO_MODE_DIF_INSERT 0 1628 #define PO_MODE_DIF_REMOVE 1 1629 #define PO_MODE_DIF_PASS 2 1630 #define PO_MODE_DIF_REPLACE 3 1631 #define PO_MODE_DIF_TCP_CKSUM 6 1632 #define PO_ENABLE_INCR_GUARD_SEED BIT_3 1633 #define PO_DISABLE_GUARD_CHECK BIT_4 1634 #define PO_DISABLE_INCR_REF_TAG BIT_5 1635 #define PO_DIS_HEADER_MODE BIT_7 1636 #define PO_ENABLE_DIF_BUNDLING BIT_8 1637 #define PO_DIS_FRAME_MODE BIT_9 1638 #define PO_DIS_VALD_APP_ESC BIT_10 /* Dis validation for escape tag/ffffh */ 1639 #define PO_DIS_VALD_APP_REF_ESC BIT_11 1640 1641 #define PO_DIS_APP_TAG_REPL BIT_12 /* disable REG Tag replacement */ 1642 #define PO_DIS_REF_TAG_REPL BIT_13 1643 #define PO_DIS_APP_TAG_VALD BIT_14 /* disable REF Tag validation */ 1644 #define PO_DIS_REF_TAG_VALD BIT_15 1645 1646 /* 1647 * ISP queue - 64-Bit addressing, continuation crc entry structure definition. 1648 */ 1649 struct crc_context { 1650 uint32_t handle; /* System handle. */ 1651 __le32 ref_tag; 1652 __le16 app_tag; 1653 uint8_t ref_tag_mask[4]; /* Validation/Replacement Mask*/ 1654 uint8_t app_tag_mask[2]; /* Validation/Replacement Mask*/ 1655 __le16 guard_seed; /* Initial Guard Seed */ 1656 __le16 prot_opts; /* Requested Data Protection Mode */ 1657 __le16 blk_size; /* Data size in bytes */ 1658 uint16_t runt_blk_guard; /* Guard value for runt block (tape 1659 * only) */ 1660 __le32 byte_count; /* Total byte count/ total data 1661 * transfer count */ 1662 union { 1663 struct { 1664 uint32_t reserved_1; 1665 uint16_t reserved_2; 1666 uint16_t reserved_3; 1667 uint32_t reserved_4; 1668 uint32_t data_address[2]; 1669 uint32_t data_length; 1670 uint32_t reserved_5[2]; 1671 uint32_t reserved_6; 1672 } nobundling; 1673 struct { 1674 __le32 dif_byte_count; /* Total DIF byte 1675 * count */ 1676 uint16_t reserved_1; 1677 __le16 dseg_count; /* Data segment count */ 1678 uint32_t reserved_2; 1679 uint32_t data_address[2]; 1680 uint32_t data_length; 1681 uint32_t dif_address[2]; 1682 uint32_t dif_length; /* Data segment 0 1683 * length */ 1684 } bundling; 1685 } u; 1686 1687 struct fcp_cmnd fcp_cmnd; 1688 dma_addr_t crc_ctx_dma; 1689 /* List of DMA context transfers */ 1690 struct list_head dsd_list; 1691 1692 /* This structure should not exceed 512 bytes */ 1693 }; 1694 1695 #define CRC_CONTEXT_LEN_FW (offsetof(struct crc_context, fcp_cmnd.lun)) 1696 #define CRC_CONTEXT_FCPCMND_OFF (offsetof(struct crc_context, fcp_cmnd.lun)) 1697 1698 /* 1699 * ISP queue - status entry structure definition. 1700 */ 1701 #define STATUS_TYPE 0x03 /* Status entry. */ 1702 typedef struct { 1703 uint8_t entry_type; /* Entry type. */ 1704 uint8_t entry_count; /* Entry count. */ 1705 uint8_t sys_define; /* System defined. */ 1706 uint8_t entry_status; /* Entry Status. */ 1707 uint32_t handle; /* System handle. */ 1708 uint16_t scsi_status; /* SCSI status. */ 1709 uint16_t comp_status; /* Completion status. */ 1710 uint16_t state_flags; /* State flags. */ 1711 uint16_t status_flags; /* Status flags. */ 1712 uint16_t rsp_info_len; /* Response Info Length. */ 1713 uint16_t req_sense_length; /* Request sense data length. */ 1714 uint32_t residual_length; /* Residual transfer length. */ 1715 uint8_t rsp_info[8]; /* FCP response information. */ 1716 uint8_t req_sense_data[32]; /* Request sense data. */ 1717 } sts_entry_t; 1718 1719 /* 1720 * Status entry entry status 1721 */ 1722 #define RF_RQ_DMA_ERROR BIT_6 /* Request Queue DMA error. */ 1723 #define RF_INV_E_ORDER BIT_5 /* Invalid entry order. */ 1724 #define RF_INV_E_COUNT BIT_4 /* Invalid entry count. */ 1725 #define RF_INV_E_PARAM BIT_3 /* Invalid entry parameter. */ 1726 #define RF_INV_E_TYPE BIT_2 /* Invalid entry type. */ 1727 #define RF_BUSY BIT_1 /* Busy */ 1728 #define RF_MASK (RF_RQ_DMA_ERROR | RF_INV_E_ORDER | RF_INV_E_COUNT | \ 1729 RF_INV_E_PARAM | RF_INV_E_TYPE | RF_BUSY) 1730 #define RF_MASK_24XX (RF_INV_E_ORDER | RF_INV_E_COUNT | RF_INV_E_PARAM | \ 1731 RF_INV_E_TYPE) 1732 1733 /* 1734 * Status entry SCSI status bit definitions. 1735 */ 1736 #define SS_MASK 0xfff /* Reserved bits BIT_12-BIT_15*/ 1737 #define SS_RESIDUAL_UNDER BIT_11 1738 #define SS_RESIDUAL_OVER BIT_10 1739 #define SS_SENSE_LEN_VALID BIT_9 1740 #define SS_RESPONSE_INFO_LEN_VALID BIT_8 1741 1742 #define SS_RESERVE_CONFLICT (BIT_4 | BIT_3) 1743 #define SS_BUSY_CONDITION BIT_3 1744 #define SS_CONDITION_MET BIT_2 1745 #define SS_CHECK_CONDITION BIT_1 1746 1747 /* 1748 * Status entry completion status 1749 */ 1750 #define CS_COMPLETE 0x0 /* No errors */ 1751 #define CS_INCOMPLETE 0x1 /* Incomplete transfer of cmd. */ 1752 #define CS_DMA 0x2 /* A DMA direction error. */ 1753 #define CS_TRANSPORT 0x3 /* Transport error. */ 1754 #define CS_RESET 0x4 /* SCSI bus reset occurred */ 1755 #define CS_ABORTED 0x5 /* System aborted command. */ 1756 #define CS_TIMEOUT 0x6 /* Timeout error. */ 1757 #define CS_DATA_OVERRUN 0x7 /* Data overrun. */ 1758 #define CS_DIF_ERROR 0xC /* DIF error detected */ 1759 1760 #define CS_DATA_UNDERRUN 0x15 /* Data Underrun. */ 1761 #define CS_QUEUE_FULL 0x1C /* Queue Full. */ 1762 #define CS_PORT_UNAVAILABLE 0x28 /* Port unavailable */ 1763 /* (selection timeout) */ 1764 #define CS_PORT_LOGGED_OUT 0x29 /* Port Logged Out */ 1765 #define CS_PORT_CONFIG_CHG 0x2A /* Port Configuration Changed */ 1766 #define CS_PORT_BUSY 0x2B /* Port Busy */ 1767 #define CS_COMPLETE_CHKCOND 0x30 /* Error? */ 1768 #define CS_IOCB_ERROR 0x31 /* Generic error for IOCB request 1769 failure */ 1770 #define CS_BAD_PAYLOAD 0x80 /* Driver defined */ 1771 #define CS_UNKNOWN 0x81 /* Driver defined */ 1772 #define CS_RETRY 0x82 /* Driver defined */ 1773 #define CS_LOOP_DOWN_ABORT 0x83 /* Driver defined */ 1774 1775 #define CS_BIDIR_RD_OVERRUN 0x700 1776 #define CS_BIDIR_RD_WR_OVERRUN 0x707 1777 #define CS_BIDIR_RD_OVERRUN_WR_UNDERRUN 0x715 1778 #define CS_BIDIR_RD_UNDERRUN 0x1500 1779 #define CS_BIDIR_RD_UNDERRUN_WR_OVERRUN 0x1507 1780 #define CS_BIDIR_RD_WR_UNDERRUN 0x1515 1781 #define CS_BIDIR_DMA 0x200 1782 /* 1783 * Status entry status flags 1784 */ 1785 #define SF_ABTS_TERMINATED BIT_10 1786 #define SF_LOGOUT_SENT BIT_13 1787 1788 /* 1789 * ISP queue - status continuation entry structure definition. 1790 */ 1791 #define STATUS_CONT_TYPE 0x10 /* Status continuation entry. */ 1792 typedef struct { 1793 uint8_t entry_type; /* Entry type. */ 1794 uint8_t entry_count; /* Entry count. */ 1795 uint8_t sys_define; /* System defined. */ 1796 uint8_t entry_status; /* Entry Status. */ 1797 uint8_t data[60]; /* data */ 1798 } sts_cont_entry_t; 1799 1800 /* 1801 * ISP queue - RIO Type 1 status entry (32 bit I/O entry handles) 1802 * structure definition. 1803 */ 1804 #define STATUS_TYPE_21 0x21 /* Status entry. */ 1805 typedef struct { 1806 uint8_t entry_type; /* Entry type. */ 1807 uint8_t entry_count; /* Entry count. */ 1808 uint8_t handle_count; /* Handle count. */ 1809 uint8_t entry_status; /* Entry Status. */ 1810 uint32_t handle[15]; /* System handles. */ 1811 } sts21_entry_t; 1812 1813 /* 1814 * ISP queue - RIO Type 2 status entry (16 bit I/O entry handles) 1815 * structure definition. 1816 */ 1817 #define STATUS_TYPE_22 0x22 /* Status entry. */ 1818 typedef struct { 1819 uint8_t entry_type; /* Entry type. */ 1820 uint8_t entry_count; /* Entry count. */ 1821 uint8_t handle_count; /* Handle count. */ 1822 uint8_t entry_status; /* Entry Status. */ 1823 uint16_t handle[30]; /* System handles. */ 1824 } sts22_entry_t; 1825 1826 /* 1827 * ISP queue - marker entry structure definition. 1828 */ 1829 #define MARKER_TYPE 0x04 /* Marker entry. */ 1830 typedef struct { 1831 uint8_t entry_type; /* Entry type. */ 1832 uint8_t entry_count; /* Entry count. */ 1833 uint8_t handle_count; /* Handle count. */ 1834 uint8_t entry_status; /* Entry Status. */ 1835 uint32_t sys_define_2; /* System defined. */ 1836 target_id_t target; /* SCSI ID */ 1837 uint8_t modifier; /* Modifier (7-0). */ 1838 #define MK_SYNC_ID_LUN 0 /* Synchronize ID/LUN */ 1839 #define MK_SYNC_ID 1 /* Synchronize ID */ 1840 #define MK_SYNC_ALL 2 /* Synchronize all ID/LUN */ 1841 #define MK_SYNC_LIP 3 /* Synchronize all ID/LUN, */ 1842 /* clear port changed, */ 1843 /* use sequence number. */ 1844 uint8_t reserved_1; 1845 uint16_t sequence_number; /* Sequence number of event */ 1846 uint16_t lun; /* SCSI LUN */ 1847 uint8_t reserved_2[48]; 1848 } mrk_entry_t; 1849 1850 /* 1851 * ISP queue - Management Server entry structure definition. 1852 */ 1853 #define MS_IOCB_TYPE 0x29 /* Management Server IOCB entry */ 1854 typedef struct { 1855 uint8_t entry_type; /* Entry type. */ 1856 uint8_t entry_count; /* Entry count. */ 1857 uint8_t handle_count; /* Handle count. */ 1858 uint8_t entry_status; /* Entry Status. */ 1859 uint32_t handle1; /* System handle. */ 1860 target_id_t loop_id; 1861 uint16_t status; 1862 uint16_t control_flags; /* Control flags. */ 1863 uint16_t reserved2; 1864 uint16_t timeout; 1865 uint16_t cmd_dsd_count; 1866 uint16_t total_dsd_count; 1867 uint8_t type; 1868 uint8_t r_ctl; 1869 uint16_t rx_id; 1870 uint16_t reserved3; 1871 uint32_t handle2; 1872 uint32_t rsp_bytecount; 1873 uint32_t req_bytecount; 1874 uint32_t dseg_req_address[2]; /* Data segment 0 address. */ 1875 uint32_t dseg_req_length; /* Data segment 0 length. */ 1876 uint32_t dseg_rsp_address[2]; /* Data segment 1 address. */ 1877 uint32_t dseg_rsp_length; /* Data segment 1 length. */ 1878 } ms_iocb_entry_t; 1879 1880 1881 /* 1882 * ISP queue - Mailbox Command entry structure definition. 1883 */ 1884 #define MBX_IOCB_TYPE 0x39 1885 struct mbx_entry { 1886 uint8_t entry_type; 1887 uint8_t entry_count; 1888 uint8_t sys_define1; 1889 /* Use sys_define1 for source type */ 1890 #define SOURCE_SCSI 0x00 1891 #define SOURCE_IP 0x01 1892 #define SOURCE_VI 0x02 1893 #define SOURCE_SCTP 0x03 1894 #define SOURCE_MP 0x04 1895 #define SOURCE_MPIOCTL 0x05 1896 #define SOURCE_ASYNC_IOCB 0x07 1897 1898 uint8_t entry_status; 1899 1900 uint32_t handle; 1901 target_id_t loop_id; 1902 1903 uint16_t status; 1904 uint16_t state_flags; 1905 uint16_t status_flags; 1906 1907 uint32_t sys_define2[2]; 1908 1909 uint16_t mb0; 1910 uint16_t mb1; 1911 uint16_t mb2; 1912 uint16_t mb3; 1913 uint16_t mb6; 1914 uint16_t mb7; 1915 uint16_t mb9; 1916 uint16_t mb10; 1917 uint32_t reserved_2[2]; 1918 uint8_t node_name[WWN_SIZE]; 1919 uint8_t port_name[WWN_SIZE]; 1920 }; 1921 1922 /* 1923 * ISP request and response queue entry sizes 1924 */ 1925 #define RESPONSE_ENTRY_SIZE (sizeof(response_t)) 1926 #define REQUEST_ENTRY_SIZE (sizeof(request_t)) 1927 1928 1929 /* 1930 * 24 bit port ID type definition. 1931 */ 1932 typedef union { 1933 uint32_t b24 : 24; 1934 1935 struct { 1936 #ifdef __BIG_ENDIAN 1937 uint8_t domain; 1938 uint8_t area; 1939 uint8_t al_pa; 1940 #elif defined(__LITTLE_ENDIAN) 1941 uint8_t al_pa; 1942 uint8_t area; 1943 uint8_t domain; 1944 #else 1945 #error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined!" 1946 #endif 1947 uint8_t rsvd_1; 1948 } b; 1949 } port_id_t; 1950 #define INVALID_PORT_ID 0xFFFFFF 1951 1952 /* 1953 * Switch info gathering structure. 1954 */ 1955 typedef struct { 1956 port_id_t d_id; 1957 uint8_t node_name[WWN_SIZE]; 1958 uint8_t port_name[WWN_SIZE]; 1959 uint8_t fabric_port_name[WWN_SIZE]; 1960 uint16_t fp_speed; 1961 uint8_t fc4_type; 1962 } sw_info_t; 1963 1964 /* FCP-4 types */ 1965 #define FC4_TYPE_FCP_SCSI 0x08 1966 #define FC4_TYPE_OTHER 0x0 1967 #define FC4_TYPE_UNKNOWN 0xff 1968 1969 /* 1970 * Fibre channel port type. 1971 */ 1972 typedef enum { 1973 FCT_UNKNOWN, 1974 FCT_RSCN, 1975 FCT_SWITCH, 1976 FCT_BROADCAST, 1977 FCT_INITIATOR, 1978 FCT_TARGET 1979 } fc_port_type_t; 1980 1981 /* 1982 * Fibre channel port structure. 1983 */ 1984 typedef struct fc_port { 1985 struct list_head list; 1986 struct scsi_qla_host *vha; 1987 1988 uint8_t node_name[WWN_SIZE]; 1989 uint8_t port_name[WWN_SIZE]; 1990 port_id_t d_id; 1991 uint16_t loop_id; 1992 uint16_t old_loop_id; 1993 1994 uint16_t tgt_id; 1995 uint16_t old_tgt_id; 1996 1997 uint8_t fcp_prio; 1998 1999 uint8_t fabric_port_name[WWN_SIZE]; 2000 uint16_t fp_speed; 2001 2002 fc_port_type_t port_type; 2003 2004 atomic_t state; 2005 uint32_t flags; 2006 2007 int login_retry; 2008 2009 struct fc_rport *rport, *drport; 2010 u32 supported_classes; 2011 2012 uint8_t fc4_type; 2013 uint8_t scan_state; 2014 2015 unsigned long last_queue_full; 2016 unsigned long last_ramp_up; 2017 2018 uint16_t port_id; 2019 } fc_port_t; 2020 2021 #include "qla_mr.h" 2022 2023 /* 2024 * Fibre channel port/lun states. 2025 */ 2026 #define FCS_UNCONFIGURED 1 2027 #define FCS_DEVICE_DEAD 2 2028 #define FCS_DEVICE_LOST 3 2029 #define FCS_ONLINE 4 2030 2031 static const char * const port_state_str[] = { 2032 "Unknown", 2033 "UNCONFIGURED", 2034 "DEAD", 2035 "LOST", 2036 "ONLINE" 2037 }; 2038 2039 /* 2040 * FC port flags. 2041 */ 2042 #define FCF_FABRIC_DEVICE BIT_0 2043 #define FCF_LOGIN_NEEDED BIT_1 2044 #define FCF_FCP2_DEVICE BIT_2 2045 #define FCF_ASYNC_SENT BIT_3 2046 #define FCF_CONF_COMP_SUPPORTED BIT_4 2047 2048 /* No loop ID flag. */ 2049 #define FC_NO_LOOP_ID 0x1000 2050 2051 /* 2052 * FC-CT interface 2053 * 2054 * NOTE: All structures are big-endian in form. 2055 */ 2056 2057 #define CT_REJECT_RESPONSE 0x8001 2058 #define CT_ACCEPT_RESPONSE 0x8002 2059 #define CT_REASON_INVALID_COMMAND_CODE 0x01 2060 #define CT_REASON_CANNOT_PERFORM 0x09 2061 #define CT_REASON_COMMAND_UNSUPPORTED 0x0b 2062 #define CT_EXPL_ALREADY_REGISTERED 0x10 2063 2064 #define NS_N_PORT_TYPE 0x01 2065 #define NS_NL_PORT_TYPE 0x02 2066 #define NS_NX_PORT_TYPE 0x7F 2067 2068 #define GA_NXT_CMD 0x100 2069 #define GA_NXT_REQ_SIZE (16 + 4) 2070 #define GA_NXT_RSP_SIZE (16 + 620) 2071 2072 #define GID_PT_CMD 0x1A1 2073 #define GID_PT_REQ_SIZE (16 + 4) 2074 2075 #define GPN_ID_CMD 0x112 2076 #define GPN_ID_REQ_SIZE (16 + 4) 2077 #define GPN_ID_RSP_SIZE (16 + 8) 2078 2079 #define GNN_ID_CMD 0x113 2080 #define GNN_ID_REQ_SIZE (16 + 4) 2081 #define GNN_ID_RSP_SIZE (16 + 8) 2082 2083 #define GFT_ID_CMD 0x117 2084 #define GFT_ID_REQ_SIZE (16 + 4) 2085 #define GFT_ID_RSP_SIZE (16 + 32) 2086 2087 #define RFT_ID_CMD 0x217 2088 #define RFT_ID_REQ_SIZE (16 + 4 + 32) 2089 #define RFT_ID_RSP_SIZE 16 2090 2091 #define RFF_ID_CMD 0x21F 2092 #define RFF_ID_REQ_SIZE (16 + 4 + 2 + 1 + 1) 2093 #define RFF_ID_RSP_SIZE 16 2094 2095 #define RNN_ID_CMD 0x213 2096 #define RNN_ID_REQ_SIZE (16 + 4 + 8) 2097 #define RNN_ID_RSP_SIZE 16 2098 2099 #define RSNN_NN_CMD 0x239 2100 #define RSNN_NN_REQ_SIZE (16 + 8 + 1 + 255) 2101 #define RSNN_NN_RSP_SIZE 16 2102 2103 #define GFPN_ID_CMD 0x11C 2104 #define GFPN_ID_REQ_SIZE (16 + 4) 2105 #define GFPN_ID_RSP_SIZE (16 + 8) 2106 2107 #define GPSC_CMD 0x127 2108 #define GPSC_REQ_SIZE (16 + 8) 2109 #define GPSC_RSP_SIZE (16 + 2 + 2) 2110 2111 #define GFF_ID_CMD 0x011F 2112 #define GFF_ID_REQ_SIZE (16 + 4) 2113 #define GFF_ID_RSP_SIZE (16 + 128) 2114 2115 /* 2116 * HBA attribute types. 2117 */ 2118 #define FDMI_HBA_ATTR_COUNT 9 2119 #define FDMI_HBA_NODE_NAME 1 2120 #define FDMI_HBA_MANUFACTURER 2 2121 #define FDMI_HBA_SERIAL_NUMBER 3 2122 #define FDMI_HBA_MODEL 4 2123 #define FDMI_HBA_MODEL_DESCRIPTION 5 2124 #define FDMI_HBA_HARDWARE_VERSION 6 2125 #define FDMI_HBA_DRIVER_VERSION 7 2126 #define FDMI_HBA_OPTION_ROM_VERSION 8 2127 #define FDMI_HBA_FIRMWARE_VERSION 9 2128 #define FDMI_HBA_OS_NAME_AND_VERSION 0xa 2129 #define FDMI_HBA_MAXIMUM_CT_PAYLOAD_LENGTH 0xb 2130 2131 struct ct_fdmi_hba_attr { 2132 uint16_t type; 2133 uint16_t len; 2134 union { 2135 uint8_t node_name[WWN_SIZE]; 2136 uint8_t manufacturer[32]; 2137 uint8_t serial_num[8]; 2138 uint8_t model[16]; 2139 uint8_t model_desc[80]; 2140 uint8_t hw_version[16]; 2141 uint8_t driver_version[32]; 2142 uint8_t orom_version[16]; 2143 uint8_t fw_version[16]; 2144 uint8_t os_version[128]; 2145 uint8_t max_ct_len[4]; 2146 } a; 2147 }; 2148 2149 struct ct_fdmi_hba_attributes { 2150 uint32_t count; 2151 struct ct_fdmi_hba_attr entry[FDMI_HBA_ATTR_COUNT]; 2152 }; 2153 2154 /* 2155 * Port attribute types. 2156 */ 2157 #define FDMI_PORT_ATTR_COUNT 6 2158 #define FDMI_PORT_FC4_TYPES 1 2159 #define FDMI_PORT_SUPPORT_SPEED 2 2160 #define FDMI_PORT_CURRENT_SPEED 3 2161 #define FDMI_PORT_MAX_FRAME_SIZE 4 2162 #define FDMI_PORT_OS_DEVICE_NAME 5 2163 #define FDMI_PORT_HOST_NAME 6 2164 2165 #define FDMI_PORT_SPEED_1GB 0x1 2166 #define FDMI_PORT_SPEED_2GB 0x2 2167 #define FDMI_PORT_SPEED_10GB 0x4 2168 #define FDMI_PORT_SPEED_4GB 0x8 2169 #define FDMI_PORT_SPEED_8GB 0x10 2170 #define FDMI_PORT_SPEED_16GB 0x20 2171 #define FDMI_PORT_SPEED_32GB 0x40 2172 #define FDMI_PORT_SPEED_UNKNOWN 0x8000 2173 2174 struct ct_fdmi_port_attr { 2175 uint16_t type; 2176 uint16_t len; 2177 union { 2178 uint8_t fc4_types[32]; 2179 uint32_t sup_speed; 2180 uint32_t cur_speed; 2181 uint32_t max_frame_size; 2182 uint8_t os_dev_name[32]; 2183 uint8_t host_name[32]; 2184 } a; 2185 }; 2186 2187 /* 2188 * Port Attribute Block. 2189 */ 2190 struct ct_fdmi_port_attributes { 2191 uint32_t count; 2192 struct ct_fdmi_port_attr entry[FDMI_PORT_ATTR_COUNT]; 2193 }; 2194 2195 /* FDMI definitions. */ 2196 #define GRHL_CMD 0x100 2197 #define GHAT_CMD 0x101 2198 #define GRPL_CMD 0x102 2199 #define GPAT_CMD 0x110 2200 2201 #define RHBA_CMD 0x200 2202 #define RHBA_RSP_SIZE 16 2203 2204 #define RHAT_CMD 0x201 2205 #define RPRT_CMD 0x210 2206 2207 #define RPA_CMD 0x211 2208 #define RPA_RSP_SIZE 16 2209 2210 #define DHBA_CMD 0x300 2211 #define DHBA_REQ_SIZE (16 + 8) 2212 #define DHBA_RSP_SIZE 16 2213 2214 #define DHAT_CMD 0x301 2215 #define DPRT_CMD 0x310 2216 #define DPA_CMD 0x311 2217 2218 /* CT command header -- request/response common fields */ 2219 struct ct_cmd_hdr { 2220 uint8_t revision; 2221 uint8_t in_id[3]; 2222 uint8_t gs_type; 2223 uint8_t gs_subtype; 2224 uint8_t options; 2225 uint8_t reserved; 2226 }; 2227 2228 /* CT command request */ 2229 struct ct_sns_req { 2230 struct ct_cmd_hdr header; 2231 uint16_t command; 2232 uint16_t max_rsp_size; 2233 uint8_t fragment_id; 2234 uint8_t reserved[3]; 2235 2236 union { 2237 /* GA_NXT, GPN_ID, GNN_ID, GFT_ID, GFPN_ID */ 2238 struct { 2239 uint8_t reserved; 2240 uint8_t port_id[3]; 2241 } port_id; 2242 2243 struct { 2244 uint8_t port_type; 2245 uint8_t domain; 2246 uint8_t area; 2247 uint8_t reserved; 2248 } gid_pt; 2249 2250 struct { 2251 uint8_t reserved; 2252 uint8_t port_id[3]; 2253 uint8_t fc4_types[32]; 2254 } rft_id; 2255 2256 struct { 2257 uint8_t reserved; 2258 uint8_t port_id[3]; 2259 uint16_t reserved2; 2260 uint8_t fc4_feature; 2261 uint8_t fc4_type; 2262 } rff_id; 2263 2264 struct { 2265 uint8_t reserved; 2266 uint8_t port_id[3]; 2267 uint8_t node_name[8]; 2268 } rnn_id; 2269 2270 struct { 2271 uint8_t node_name[8]; 2272 uint8_t name_len; 2273 uint8_t sym_node_name[255]; 2274 } rsnn_nn; 2275 2276 struct { 2277 uint8_t hba_indentifier[8]; 2278 } ghat; 2279 2280 struct { 2281 uint8_t hba_identifier[8]; 2282 uint32_t entry_count; 2283 uint8_t port_name[8]; 2284 struct ct_fdmi_hba_attributes attrs; 2285 } rhba; 2286 2287 struct { 2288 uint8_t hba_identifier[8]; 2289 struct ct_fdmi_hba_attributes attrs; 2290 } rhat; 2291 2292 struct { 2293 uint8_t port_name[8]; 2294 struct ct_fdmi_port_attributes attrs; 2295 } rpa; 2296 2297 struct { 2298 uint8_t port_name[8]; 2299 } dhba; 2300 2301 struct { 2302 uint8_t port_name[8]; 2303 } dhat; 2304 2305 struct { 2306 uint8_t port_name[8]; 2307 } dprt; 2308 2309 struct { 2310 uint8_t port_name[8]; 2311 } dpa; 2312 2313 struct { 2314 uint8_t port_name[8]; 2315 } gpsc; 2316 2317 struct { 2318 uint8_t reserved; 2319 uint8_t port_name[3]; 2320 } gff_id; 2321 } req; 2322 }; 2323 2324 /* CT command response header */ 2325 struct ct_rsp_hdr { 2326 struct ct_cmd_hdr header; 2327 uint16_t response; 2328 uint16_t residual; 2329 uint8_t fragment_id; 2330 uint8_t reason_code; 2331 uint8_t explanation_code; 2332 uint8_t vendor_unique; 2333 }; 2334 2335 struct ct_sns_gid_pt_data { 2336 uint8_t control_byte; 2337 uint8_t port_id[3]; 2338 }; 2339 2340 struct ct_sns_rsp { 2341 struct ct_rsp_hdr header; 2342 2343 union { 2344 struct { 2345 uint8_t port_type; 2346 uint8_t port_id[3]; 2347 uint8_t port_name[8]; 2348 uint8_t sym_port_name_len; 2349 uint8_t sym_port_name[255]; 2350 uint8_t node_name[8]; 2351 uint8_t sym_node_name_len; 2352 uint8_t sym_node_name[255]; 2353 uint8_t init_proc_assoc[8]; 2354 uint8_t node_ip_addr[16]; 2355 uint8_t class_of_service[4]; 2356 uint8_t fc4_types[32]; 2357 uint8_t ip_address[16]; 2358 uint8_t fabric_port_name[8]; 2359 uint8_t reserved; 2360 uint8_t hard_address[3]; 2361 } ga_nxt; 2362 2363 struct { 2364 /* Assume the largest number of targets for the union */ 2365 struct ct_sns_gid_pt_data 2366 entries[MAX_FIBRE_DEVICES_MAX]; 2367 } gid_pt; 2368 2369 struct { 2370 uint8_t port_name[8]; 2371 } gpn_id; 2372 2373 struct { 2374 uint8_t node_name[8]; 2375 } gnn_id; 2376 2377 struct { 2378 uint8_t fc4_types[32]; 2379 } gft_id; 2380 2381 struct { 2382 uint32_t entry_count; 2383 uint8_t port_name[8]; 2384 struct ct_fdmi_hba_attributes attrs; 2385 } ghat; 2386 2387 struct { 2388 uint8_t port_name[8]; 2389 } gfpn_id; 2390 2391 struct { 2392 uint16_t speeds; 2393 uint16_t speed; 2394 } gpsc; 2395 2396 #define GFF_FCP_SCSI_OFFSET 7 2397 struct { 2398 uint8_t fc4_features[128]; 2399 } gff_id; 2400 } rsp; 2401 }; 2402 2403 struct ct_sns_pkt { 2404 union { 2405 struct ct_sns_req req; 2406 struct ct_sns_rsp rsp; 2407 } p; 2408 }; 2409 2410 /* 2411 * SNS command structures -- for 2200 compatibility. 2412 */ 2413 #define RFT_ID_SNS_SCMD_LEN 22 2414 #define RFT_ID_SNS_CMD_SIZE 60 2415 #define RFT_ID_SNS_DATA_SIZE 16 2416 2417 #define RNN_ID_SNS_SCMD_LEN 10 2418 #define RNN_ID_SNS_CMD_SIZE 36 2419 #define RNN_ID_SNS_DATA_SIZE 16 2420 2421 #define GA_NXT_SNS_SCMD_LEN 6 2422 #define GA_NXT_SNS_CMD_SIZE 28 2423 #define GA_NXT_SNS_DATA_SIZE (620 + 16) 2424 2425 #define GID_PT_SNS_SCMD_LEN 6 2426 #define GID_PT_SNS_CMD_SIZE 28 2427 /* 2428 * Assume MAX_FIBRE_DEVICES_2100 as these defines are only used with older 2429 * adapters. 2430 */ 2431 #define GID_PT_SNS_DATA_SIZE (MAX_FIBRE_DEVICES_2100 * 4 + 16) 2432 2433 #define GPN_ID_SNS_SCMD_LEN 6 2434 #define GPN_ID_SNS_CMD_SIZE 28 2435 #define GPN_ID_SNS_DATA_SIZE (8 + 16) 2436 2437 #define GNN_ID_SNS_SCMD_LEN 6 2438 #define GNN_ID_SNS_CMD_SIZE 28 2439 #define GNN_ID_SNS_DATA_SIZE (8 + 16) 2440 2441 struct sns_cmd_pkt { 2442 union { 2443 struct { 2444 uint16_t buffer_length; 2445 uint16_t reserved_1; 2446 uint32_t buffer_address[2]; 2447 uint16_t subcommand_length; 2448 uint16_t reserved_2; 2449 uint16_t subcommand; 2450 uint16_t size; 2451 uint32_t reserved_3; 2452 uint8_t param[36]; 2453 } cmd; 2454 2455 uint8_t rft_data[RFT_ID_SNS_DATA_SIZE]; 2456 uint8_t rnn_data[RNN_ID_SNS_DATA_SIZE]; 2457 uint8_t gan_data[GA_NXT_SNS_DATA_SIZE]; 2458 uint8_t gid_data[GID_PT_SNS_DATA_SIZE]; 2459 uint8_t gpn_data[GPN_ID_SNS_DATA_SIZE]; 2460 uint8_t gnn_data[GNN_ID_SNS_DATA_SIZE]; 2461 } p; 2462 }; 2463 2464 struct fw_blob { 2465 char *name; 2466 uint32_t segs[4]; 2467 const struct firmware *fw; 2468 }; 2469 2470 /* Return data from MBC_GET_ID_LIST call. */ 2471 struct gid_list_info { 2472 uint8_t al_pa; 2473 uint8_t area; 2474 uint8_t domain; 2475 uint8_t loop_id_2100; /* ISP2100/ISP2200 -- 4 bytes. */ 2476 uint16_t loop_id; /* ISP23XX -- 6 bytes. */ 2477 uint16_t reserved_1; /* ISP24XX -- 8 bytes. */ 2478 }; 2479 2480 /* NPIV */ 2481 typedef struct vport_info { 2482 uint8_t port_name[WWN_SIZE]; 2483 uint8_t node_name[WWN_SIZE]; 2484 int vp_id; 2485 uint16_t loop_id; 2486 unsigned long host_no; 2487 uint8_t port_id[3]; 2488 int loop_state; 2489 } vport_info_t; 2490 2491 typedef struct vport_params { 2492 uint8_t port_name[WWN_SIZE]; 2493 uint8_t node_name[WWN_SIZE]; 2494 uint32_t options; 2495 #define VP_OPTS_RETRY_ENABLE BIT_0 2496 #define VP_OPTS_VP_DISABLE BIT_1 2497 } vport_params_t; 2498 2499 /* NPIV - return codes of VP create and modify */ 2500 #define VP_RET_CODE_OK 0 2501 #define VP_RET_CODE_FATAL 1 2502 #define VP_RET_CODE_WRONG_ID 2 2503 #define VP_RET_CODE_WWPN 3 2504 #define VP_RET_CODE_RESOURCES 4 2505 #define VP_RET_CODE_NO_MEM 5 2506 #define VP_RET_CODE_NOT_FOUND 6 2507 2508 struct qla_hw_data; 2509 struct rsp_que; 2510 /* 2511 * ISP operations 2512 */ 2513 struct isp_operations { 2514 2515 int (*pci_config) (struct scsi_qla_host *); 2516 void (*reset_chip) (struct scsi_qla_host *); 2517 int (*chip_diag) (struct scsi_qla_host *); 2518 void (*config_rings) (struct scsi_qla_host *); 2519 void (*reset_adapter) (struct scsi_qla_host *); 2520 int (*nvram_config) (struct scsi_qla_host *); 2521 void (*update_fw_options) (struct scsi_qla_host *); 2522 int (*load_risc) (struct scsi_qla_host *, uint32_t *); 2523 2524 char * (*pci_info_str) (struct scsi_qla_host *, char *); 2525 char * (*fw_version_str) (struct scsi_qla_host *, char *); 2526 2527 irq_handler_t intr_handler; 2528 void (*enable_intrs) (struct qla_hw_data *); 2529 void (*disable_intrs) (struct qla_hw_data *); 2530 2531 int (*abort_command) (srb_t *); 2532 int (*target_reset) (struct fc_port *, unsigned int, int); 2533 int (*lun_reset) (struct fc_port *, unsigned int, int); 2534 int (*fabric_login) (struct scsi_qla_host *, uint16_t, uint8_t, 2535 uint8_t, uint8_t, uint16_t *, uint8_t); 2536 int (*fabric_logout) (struct scsi_qla_host *, uint16_t, uint8_t, 2537 uint8_t, uint8_t); 2538 2539 uint16_t (*calc_req_entries) (uint16_t); 2540 void (*build_iocbs) (srb_t *, cmd_entry_t *, uint16_t); 2541 void * (*prep_ms_iocb) (struct scsi_qla_host *, uint32_t, uint32_t); 2542 void * (*prep_ms_fdmi_iocb) (struct scsi_qla_host *, uint32_t, 2543 uint32_t); 2544 2545 uint8_t * (*read_nvram) (struct scsi_qla_host *, uint8_t *, 2546 uint32_t, uint32_t); 2547 int (*write_nvram) (struct scsi_qla_host *, uint8_t *, uint32_t, 2548 uint32_t); 2549 2550 void (*fw_dump) (struct scsi_qla_host *, int); 2551 2552 int (*beacon_on) (struct scsi_qla_host *); 2553 int (*beacon_off) (struct scsi_qla_host *); 2554 void (*beacon_blink) (struct scsi_qla_host *); 2555 2556 uint8_t * (*read_optrom) (struct scsi_qla_host *, uint8_t *, 2557 uint32_t, uint32_t); 2558 int (*write_optrom) (struct scsi_qla_host *, uint8_t *, uint32_t, 2559 uint32_t); 2560 2561 int (*get_flash_version) (struct scsi_qla_host *, void *); 2562 int (*start_scsi) (srb_t *); 2563 int (*abort_isp) (struct scsi_qla_host *); 2564 int (*iospace_config)(struct qla_hw_data*); 2565 int (*initialize_adapter)(struct scsi_qla_host *); 2566 }; 2567 2568 /* MSI-X Support *************************************************************/ 2569 2570 #define QLA_MSIX_CHIP_REV_24XX 3 2571 #define QLA_MSIX_FW_MODE(m) (((m) & (BIT_7|BIT_8|BIT_9)) >> 7) 2572 #define QLA_MSIX_FW_MODE_1(m) (QLA_MSIX_FW_MODE(m) == 1) 2573 2574 #define QLA_MSIX_DEFAULT 0x00 2575 #define QLA_MSIX_RSP_Q 0x01 2576 2577 #define QLA_MIDX_DEFAULT 0 2578 #define QLA_MIDX_RSP_Q 1 2579 #define QLA_PCI_MSIX_CONTROL 0xa2 2580 #define QLA_83XX_PCI_MSIX_CONTROL 0x92 2581 2582 struct scsi_qla_host; 2583 2584 struct qla_msix_entry { 2585 int have_irq; 2586 uint32_t vector; 2587 uint16_t entry; 2588 struct rsp_que *rsp; 2589 }; 2590 2591 #define WATCH_INTERVAL 1 /* number of seconds */ 2592 2593 /* Work events. */ 2594 enum qla_work_type { 2595 QLA_EVT_AEN, 2596 QLA_EVT_IDC_ACK, 2597 QLA_EVT_ASYNC_LOGIN, 2598 QLA_EVT_ASYNC_LOGIN_DONE, 2599 QLA_EVT_ASYNC_LOGOUT, 2600 QLA_EVT_ASYNC_LOGOUT_DONE, 2601 QLA_EVT_ASYNC_ADISC, 2602 QLA_EVT_ASYNC_ADISC_DONE, 2603 QLA_EVT_UEVENT, 2604 QLA_EVT_AENFX, 2605 }; 2606 2607 2608 struct qla_work_evt { 2609 struct list_head list; 2610 enum qla_work_type type; 2611 u32 flags; 2612 #define QLA_EVT_FLAG_FREE 0x1 2613 2614 union { 2615 struct { 2616 enum fc_host_event_code code; 2617 u32 data; 2618 } aen; 2619 struct { 2620 #define QLA_IDC_ACK_REGS 7 2621 uint16_t mb[QLA_IDC_ACK_REGS]; 2622 } idc_ack; 2623 struct { 2624 struct fc_port *fcport; 2625 #define QLA_LOGIO_LOGIN_RETRIED BIT_0 2626 u16 data[2]; 2627 } logio; 2628 struct { 2629 u32 code; 2630 #define QLA_UEVENT_CODE_FW_DUMP 0 2631 } uevent; 2632 struct { 2633 uint32_t evtcode; 2634 uint32_t mbx[8]; 2635 uint32_t count; 2636 } aenfx; 2637 struct { 2638 srb_t *sp; 2639 } iosb; 2640 } u; 2641 }; 2642 2643 struct qla_chip_state_84xx { 2644 struct list_head list; 2645 struct kref kref; 2646 2647 void *bus; 2648 spinlock_t access_lock; 2649 struct mutex fw_update_mutex; 2650 uint32_t fw_update; 2651 uint32_t op_fw_version; 2652 uint32_t op_fw_size; 2653 uint32_t op_fw_seq_size; 2654 uint32_t diag_fw_version; 2655 uint32_t gold_fw_version; 2656 }; 2657 2658 struct qla_statistics { 2659 uint32_t total_isp_aborts; 2660 uint64_t input_bytes; 2661 uint64_t output_bytes; 2662 uint64_t input_requests; 2663 uint64_t output_requests; 2664 uint32_t control_requests; 2665 2666 uint64_t jiffies_at_last_reset; 2667 }; 2668 2669 struct bidi_statistics { 2670 unsigned long long io_count; 2671 unsigned long long transfer_bytes; 2672 }; 2673 2674 /* Multi queue support */ 2675 #define MBC_INITIALIZE_MULTIQ 0x1f 2676 #define QLA_QUE_PAGE 0X1000 2677 #define QLA_MQ_SIZE 32 2678 #define QLA_MAX_QUEUES 256 2679 #define ISP_QUE_REG(ha, id) \ 2680 ((ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha)) ? \ 2681 ((void __iomem *)ha->mqiobase + (QLA_QUE_PAGE * id)) :\ 2682 ((void __iomem *)ha->iobase)) 2683 #define QLA_REQ_QUE_ID(tag) \ 2684 ((tag < QLA_MAX_QUEUES && tag > 0) ? tag : 0) 2685 #define QLA_DEFAULT_QUE_QOS 5 2686 #define QLA_PRECONFIG_VPORTS 32 2687 #define QLA_MAX_VPORTS_QLA24XX 128 2688 #define QLA_MAX_VPORTS_QLA25XX 256 2689 /* Response queue data structure */ 2690 struct rsp_que { 2691 dma_addr_t dma; 2692 response_t *ring; 2693 response_t *ring_ptr; 2694 uint32_t __iomem *rsp_q_in; /* FWI2-capable only. */ 2695 uint32_t __iomem *rsp_q_out; 2696 uint16_t ring_index; 2697 uint16_t out_ptr; 2698 uint16_t *in_ptr; /* queue shadow in index */ 2699 uint16_t length; 2700 uint16_t options; 2701 uint16_t rid; 2702 uint16_t id; 2703 uint16_t vp_idx; 2704 struct qla_hw_data *hw; 2705 struct qla_msix_entry *msix; 2706 struct req_que *req; 2707 srb_t *status_srb; /* status continuation entry */ 2708 struct work_struct q_work; 2709 2710 dma_addr_t dma_fx00; 2711 response_t *ring_fx00; 2712 uint16_t length_fx00; 2713 uint8_t rsp_pkt[REQUEST_ENTRY_SIZE]; 2714 }; 2715 2716 /* Request queue data structure */ 2717 struct req_que { 2718 dma_addr_t dma; 2719 request_t *ring; 2720 request_t *ring_ptr; 2721 uint32_t __iomem *req_q_in; /* FWI2-capable only. */ 2722 uint32_t __iomem *req_q_out; 2723 uint16_t ring_index; 2724 uint16_t in_ptr; 2725 uint16_t *out_ptr; /* queue shadow out index */ 2726 uint16_t cnt; 2727 uint16_t length; 2728 uint16_t options; 2729 uint16_t rid; 2730 uint16_t id; 2731 uint16_t qos; 2732 uint16_t vp_idx; 2733 struct rsp_que *rsp; 2734 srb_t **outstanding_cmds; 2735 uint32_t current_outstanding_cmd; 2736 uint16_t num_outstanding_cmds; 2737 int max_q_depth; 2738 2739 dma_addr_t dma_fx00; 2740 request_t *ring_fx00; 2741 uint16_t length_fx00; 2742 uint8_t req_pkt[REQUEST_ENTRY_SIZE]; 2743 }; 2744 2745 /* Place holder for FW buffer parameters */ 2746 struct qlfc_fw { 2747 void *fw_buf; 2748 dma_addr_t fw_dma; 2749 uint32_t len; 2750 }; 2751 2752 struct scsi_qlt_host { 2753 void *target_lport_ptr; 2754 struct mutex tgt_mutex; 2755 struct mutex tgt_host_action_mutex; 2756 struct qla_tgt *qla_tgt; 2757 }; 2758 2759 struct qlt_hw_data { 2760 /* Protected by hw lock */ 2761 uint32_t enable_class_2:1; 2762 uint32_t enable_explicit_conf:1; 2763 uint32_t ini_mode_force_reverse:1; 2764 uint32_t node_name_set:1; 2765 2766 dma_addr_t atio_dma; /* Physical address. */ 2767 struct atio *atio_ring; /* Base virtual address */ 2768 struct atio *atio_ring_ptr; /* Current address. */ 2769 uint16_t atio_ring_index; /* Current index. */ 2770 uint16_t atio_q_length; 2771 uint32_t __iomem *atio_q_in; 2772 uint32_t __iomem *atio_q_out; 2773 2774 struct qla_tgt_func_tmpl *tgt_ops; 2775 struct qla_tgt_cmd *cmds[DEFAULT_OUTSTANDING_COMMANDS]; 2776 uint16_t current_handle; 2777 2778 struct qla_tgt_vp_map *tgt_vp_map; 2779 2780 int saved_set; 2781 uint16_t saved_exchange_count; 2782 uint32_t saved_firmware_options_1; 2783 uint32_t saved_firmware_options_2; 2784 uint32_t saved_firmware_options_3; 2785 uint8_t saved_firmware_options[2]; 2786 uint8_t saved_add_firmware_options[2]; 2787 2788 uint8_t tgt_node_name[WWN_SIZE]; 2789 }; 2790 2791 /* 2792 * Qlogic host adapter specific data structure. 2793 */ 2794 struct qla_hw_data { 2795 struct pci_dev *pdev; 2796 /* SRB cache. */ 2797 #define SRB_MIN_REQ 128 2798 mempool_t *srb_mempool; 2799 2800 volatile struct { 2801 uint32_t mbox_int :1; 2802 uint32_t mbox_busy :1; 2803 uint32_t disable_risc_code_load :1; 2804 uint32_t enable_64bit_addressing :1; 2805 uint32_t enable_lip_reset :1; 2806 uint32_t enable_target_reset :1; 2807 uint32_t enable_lip_full_login :1; 2808 uint32_t enable_led_scheme :1; 2809 2810 uint32_t msi_enabled :1; 2811 uint32_t msix_enabled :1; 2812 uint32_t disable_serdes :1; 2813 uint32_t gpsc_supported :1; 2814 uint32_t npiv_supported :1; 2815 uint32_t pci_channel_io_perm_failure :1; 2816 uint32_t fce_enabled :1; 2817 uint32_t fac_supported :1; 2818 2819 uint32_t chip_reset_done :1; 2820 uint32_t running_gold_fw :1; 2821 uint32_t eeh_busy :1; 2822 uint32_t cpu_affinity_enabled :1; 2823 uint32_t disable_msix_handshake :1; 2824 uint32_t fcp_prio_enabled :1; 2825 uint32_t isp82xx_fw_hung:1; 2826 uint32_t nic_core_hung:1; 2827 2828 uint32_t quiesce_owner:1; 2829 uint32_t nic_core_reset_hdlr_active:1; 2830 uint32_t nic_core_reset_owner:1; 2831 uint32_t isp82xx_no_md_cap:1; 2832 uint32_t host_shutting_down:1; 2833 uint32_t idc_compl_status:1; 2834 2835 uint32_t mr_reset_hdlr_active:1; 2836 uint32_t mr_intr_valid:1; 2837 /* 34 bits */ 2838 } flags; 2839 2840 /* This spinlock is used to protect "io transactions", you must 2841 * acquire it before doing any IO to the card, eg with RD_REG*() and 2842 * WRT_REG*() for the duration of your entire commandtransaction. 2843 * 2844 * This spinlock is of lower priority than the io request lock. 2845 */ 2846 2847 spinlock_t hardware_lock ____cacheline_aligned; 2848 int bars; 2849 int mem_only; 2850 device_reg_t *iobase; /* Base I/O address */ 2851 resource_size_t pio_address; 2852 2853 #define MIN_IOBASE_LEN 0x100 2854 dma_addr_t bar0_hdl; 2855 2856 void __iomem *cregbase; 2857 dma_addr_t bar2_hdl; 2858 #define BAR0_LEN_FX00 (1024 * 1024) 2859 #define BAR2_LEN_FX00 (128 * 1024) 2860 2861 uint32_t rqstq_intr_code; 2862 uint32_t mbx_intr_code; 2863 uint32_t req_que_len; 2864 uint32_t rsp_que_len; 2865 uint32_t req_que_off; 2866 uint32_t rsp_que_off; 2867 2868 /* Multi queue data structs */ 2869 device_reg_t *mqiobase; 2870 device_reg_t *msixbase; 2871 uint16_t msix_count; 2872 uint8_t mqenable; 2873 struct req_que **req_q_map; 2874 struct rsp_que **rsp_q_map; 2875 unsigned long req_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)]; 2876 unsigned long rsp_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)]; 2877 uint8_t max_req_queues; 2878 uint8_t max_rsp_queues; 2879 struct qla_npiv_entry *npiv_info; 2880 uint16_t nvram_npiv_size; 2881 2882 uint16_t switch_cap; 2883 #define FLOGI_SEQ_DEL BIT_8 2884 #define FLOGI_MID_SUPPORT BIT_10 2885 #define FLOGI_VSAN_SUPPORT BIT_12 2886 #define FLOGI_SP_SUPPORT BIT_13 2887 2888 uint8_t port_no; /* Physical port of adapter */ 2889 2890 /* Timeout timers. */ 2891 uint8_t loop_down_abort_time; /* port down timer */ 2892 atomic_t loop_down_timer; /* loop down timer */ 2893 uint8_t link_down_timeout; /* link down timeout */ 2894 uint16_t max_loop_id; 2895 uint16_t max_fibre_devices; /* Maximum number of targets */ 2896 2897 uint16_t fb_rev; 2898 uint16_t min_external_loopid; /* First external loop Id */ 2899 2900 #define PORT_SPEED_UNKNOWN 0xFFFF 2901 #define PORT_SPEED_1GB 0x00 2902 #define PORT_SPEED_2GB 0x01 2903 #define PORT_SPEED_4GB 0x03 2904 #define PORT_SPEED_8GB 0x04 2905 #define PORT_SPEED_16GB 0x05 2906 #define PORT_SPEED_32GB 0x06 2907 #define PORT_SPEED_10GB 0x13 2908 uint16_t link_data_rate; /* F/W operating speed */ 2909 2910 uint8_t current_topology; 2911 uint8_t prev_topology; 2912 #define ISP_CFG_NL 1 2913 #define ISP_CFG_N 2 2914 #define ISP_CFG_FL 4 2915 #define ISP_CFG_F 8 2916 2917 uint8_t operating_mode; /* F/W operating mode */ 2918 #define LOOP 0 2919 #define P2P 1 2920 #define LOOP_P2P 2 2921 #define P2P_LOOP 3 2922 uint8_t interrupts_on; 2923 uint32_t isp_abort_cnt; 2924 2925 #define PCI_DEVICE_ID_QLOGIC_ISP2532 0x2532 2926 #define PCI_DEVICE_ID_QLOGIC_ISP8432 0x8432 2927 #define PCI_DEVICE_ID_QLOGIC_ISP8001 0x8001 2928 #define PCI_DEVICE_ID_QLOGIC_ISP8031 0x8031 2929 #define PCI_DEVICE_ID_QLOGIC_ISP2031 0x2031 2930 #define PCI_DEVICE_ID_QLOGIC_ISP2071 0x2071 2931 #define PCI_DEVICE_ID_QLOGIC_ISP2271 0x2271 2932 2933 uint32_t device_type; 2934 #define DT_ISP2100 BIT_0 2935 #define DT_ISP2200 BIT_1 2936 #define DT_ISP2300 BIT_2 2937 #define DT_ISP2312 BIT_3 2938 #define DT_ISP2322 BIT_4 2939 #define DT_ISP6312 BIT_5 2940 #define DT_ISP6322 BIT_6 2941 #define DT_ISP2422 BIT_7 2942 #define DT_ISP2432 BIT_8 2943 #define DT_ISP5422 BIT_9 2944 #define DT_ISP5432 BIT_10 2945 #define DT_ISP2532 BIT_11 2946 #define DT_ISP8432 BIT_12 2947 #define DT_ISP8001 BIT_13 2948 #define DT_ISP8021 BIT_14 2949 #define DT_ISP2031 BIT_15 2950 #define DT_ISP8031 BIT_16 2951 #define DT_ISPFX00 BIT_17 2952 #define DT_ISP8044 BIT_18 2953 #define DT_ISP2071 BIT_19 2954 #define DT_ISP2271 BIT_20 2955 #define DT_ISP_LAST (DT_ISP2271 << 1) 2956 2957 #define DT_T10_PI BIT_25 2958 #define DT_IIDMA BIT_26 2959 #define DT_FWI2 BIT_27 2960 #define DT_ZIO_SUPPORTED BIT_28 2961 #define DT_OEM_001 BIT_29 2962 #define DT_ISP2200A BIT_30 2963 #define DT_EXTENDED_IDS BIT_31 2964 #define DT_MASK(ha) ((ha)->device_type & (DT_ISP_LAST - 1)) 2965 #define IS_QLA2100(ha) (DT_MASK(ha) & DT_ISP2100) 2966 #define IS_QLA2200(ha) (DT_MASK(ha) & DT_ISP2200) 2967 #define IS_QLA2300(ha) (DT_MASK(ha) & DT_ISP2300) 2968 #define IS_QLA2312(ha) (DT_MASK(ha) & DT_ISP2312) 2969 #define IS_QLA2322(ha) (DT_MASK(ha) & DT_ISP2322) 2970 #define IS_QLA6312(ha) (DT_MASK(ha) & DT_ISP6312) 2971 #define IS_QLA6322(ha) (DT_MASK(ha) & DT_ISP6322) 2972 #define IS_QLA2422(ha) (DT_MASK(ha) & DT_ISP2422) 2973 #define IS_QLA2432(ha) (DT_MASK(ha) & DT_ISP2432) 2974 #define IS_QLA5422(ha) (DT_MASK(ha) & DT_ISP5422) 2975 #define IS_QLA5432(ha) (DT_MASK(ha) & DT_ISP5432) 2976 #define IS_QLA2532(ha) (DT_MASK(ha) & DT_ISP2532) 2977 #define IS_QLA8432(ha) (DT_MASK(ha) & DT_ISP8432) 2978 #define IS_QLA8001(ha) (DT_MASK(ha) & DT_ISP8001) 2979 #define IS_QLA81XX(ha) (IS_QLA8001(ha)) 2980 #define IS_QLA82XX(ha) (DT_MASK(ha) & DT_ISP8021) 2981 #define IS_QLA8044(ha) (DT_MASK(ha) & DT_ISP8044) 2982 #define IS_QLA2031(ha) (DT_MASK(ha) & DT_ISP2031) 2983 #define IS_QLA8031(ha) (DT_MASK(ha) & DT_ISP8031) 2984 #define IS_QLAFX00(ha) (DT_MASK(ha) & DT_ISPFX00) 2985 #define IS_QLA2071(ha) (DT_MASK(ha) & DT_ISP2071) 2986 #define IS_QLA2271(ha) (DT_MASK(ha) & DT_ISP2271) 2987 2988 #define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \ 2989 IS_QLA6312(ha) || IS_QLA6322(ha)) 2990 #define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha)) 2991 #define IS_QLA54XX(ha) (IS_QLA5422(ha) || IS_QLA5432(ha)) 2992 #define IS_QLA25XX(ha) (IS_QLA2532(ha)) 2993 #define IS_QLA83XX(ha) (IS_QLA2031(ha) || IS_QLA8031(ha)) 2994 #define IS_QLA84XX(ha) (IS_QLA8432(ha)) 2995 #define IS_QLA27XX(ha) (IS_QLA2071(ha) || IS_QLA2271(ha)) 2996 #define IS_QLA24XX_TYPE(ha) (IS_QLA24XX(ha) || IS_QLA54XX(ha) || \ 2997 IS_QLA84XX(ha)) 2998 #define IS_CNA_CAPABLE(ha) (IS_QLA81XX(ha) || IS_QLA82XX(ha) || \ 2999 IS_QLA8031(ha) || IS_QLA8044(ha)) 3000 #define IS_P3P_TYPE(ha) (IS_QLA82XX(ha) || IS_QLA8044(ha)) 3001 #define IS_QLA2XXX_MIDTYPE(ha) (IS_QLA24XX(ha) || IS_QLA84XX(ha) || \ 3002 IS_QLA25XX(ha) || IS_QLA81XX(ha) || \ 3003 IS_QLA82XX(ha) || IS_QLA83XX(ha) || \ 3004 IS_QLA8044(ha) || IS_QLA27XX(ha)) 3005 #define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha)) 3006 #define IS_NOPOLLING_TYPE(ha) (IS_QLA81XX(ha) && (ha)->flags.msix_enabled) 3007 #define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha) || \ 3008 IS_QLA27XX(ha)) 3009 #define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha) || \ 3010 IS_QLA27XX(ha)) 3011 #define IS_ALOGIO_CAPABLE(ha) (IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha)) 3012 3013 #define IS_T10_PI_CAPABLE(ha) ((ha)->device_type & DT_T10_PI) 3014 #define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA) 3015 #define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2) 3016 #define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED) 3017 #define IS_OEM_001(ha) ((ha)->device_type & DT_OEM_001) 3018 #define HAS_EXTENDED_IDS(ha) ((ha)->device_type & DT_EXTENDED_IDS) 3019 #define IS_CT6_SUPPORTED(ha) ((ha)->device_type & DT_CT6_SUPPORTED) 3020 #define IS_MQUE_CAPABLE(ha) ((ha)->mqenable || IS_QLA83XX(ha) || \ 3021 IS_QLA27XX(ha)) 3022 #define IS_BIDI_CAPABLE(ha) ((IS_QLA25XX(ha) || IS_QLA2031(ha))) 3023 /* Bit 21 of fw_attributes decides the MCTP capabilities */ 3024 #define IS_MCTP_CAPABLE(ha) (IS_QLA2031(ha) && \ 3025 ((ha)->fw_attributes_ext[0] & BIT_0)) 3026 #define IS_PI_UNINIT_CAPABLE(ha) (IS_QLA83XX(ha)) 3027 #define IS_PI_IPGUARD_CAPABLE(ha) (IS_QLA83XX(ha)) 3028 #define IS_PI_DIFB_DIX0_CAPABLE(ha) (0) 3029 #define IS_PI_SPLIT_DET_CAPABLE_HBA(ha) (IS_QLA83XX(ha)) 3030 #define IS_PI_SPLIT_DET_CAPABLE(ha) (IS_PI_SPLIT_DET_CAPABLE_HBA(ha) && \ 3031 (((ha)->fw_attributes_h << 16 | (ha)->fw_attributes) & BIT_22)) 3032 #define IS_ATIO_MSIX_CAPABLE(ha) (IS_QLA83XX(ha)) 3033 #define IS_TGT_MODE_CAPABLE(ha) (ha->tgt.atio_q_length) 3034 #define IS_SHADOW_REG_CAPABLE(ha) (IS_QLA27XX(ha)) 3035 3036 /* HBA serial number */ 3037 uint8_t serial0; 3038 uint8_t serial1; 3039 uint8_t serial2; 3040 3041 /* NVRAM configuration data */ 3042 #define MAX_NVRAM_SIZE 4096 3043 #define VPD_OFFSET MAX_NVRAM_SIZE / 2 3044 uint16_t nvram_size; 3045 uint16_t nvram_base; 3046 void *nvram; 3047 uint16_t vpd_size; 3048 uint16_t vpd_base; 3049 void *vpd; 3050 3051 uint16_t loop_reset_delay; 3052 uint8_t retry_count; 3053 uint8_t login_timeout; 3054 uint16_t r_a_tov; 3055 int port_down_retry_count; 3056 uint8_t mbx_count; 3057 uint8_t aen_mbx_count; 3058 3059 uint32_t login_retry_count; 3060 /* SNS command interfaces. */ 3061 ms_iocb_entry_t *ms_iocb; 3062 dma_addr_t ms_iocb_dma; 3063 struct ct_sns_pkt *ct_sns; 3064 dma_addr_t ct_sns_dma; 3065 /* SNS command interfaces for 2200. */ 3066 struct sns_cmd_pkt *sns_cmd; 3067 dma_addr_t sns_cmd_dma; 3068 3069 #define SFP_DEV_SIZE 256 3070 #define SFP_BLOCK_SIZE 64 3071 void *sfp_data; 3072 dma_addr_t sfp_data_dma; 3073 3074 #define XGMAC_DATA_SIZE 4096 3075 void *xgmac_data; 3076 dma_addr_t xgmac_data_dma; 3077 3078 #define DCBX_TLV_DATA_SIZE 4096 3079 void *dcbx_tlv; 3080 dma_addr_t dcbx_tlv_dma; 3081 3082 struct task_struct *dpc_thread; 3083 uint8_t dpc_active; /* DPC routine is active */ 3084 3085 dma_addr_t gid_list_dma; 3086 struct gid_list_info *gid_list; 3087 int gid_list_info_size; 3088 3089 /* Small DMA pool allocations -- maximum 256 bytes in length. */ 3090 #define DMA_POOL_SIZE 256 3091 struct dma_pool *s_dma_pool; 3092 3093 dma_addr_t init_cb_dma; 3094 init_cb_t *init_cb; 3095 int init_cb_size; 3096 dma_addr_t ex_init_cb_dma; 3097 struct ex_init_cb_81xx *ex_init_cb; 3098 3099 void *async_pd; 3100 dma_addr_t async_pd_dma; 3101 3102 void *swl; 3103 3104 /* These are used by mailbox operations. */ 3105 uint16_t mailbox_out[MAILBOX_REGISTER_COUNT]; 3106 uint32_t mailbox_out32[MAILBOX_REGISTER_COUNT]; 3107 uint32_t aenmb[AEN_MAILBOX_REGISTER_COUNT_FX00]; 3108 3109 mbx_cmd_t *mcp; 3110 struct mbx_cmd_32 *mcp32; 3111 3112 unsigned long mbx_cmd_flags; 3113 #define MBX_INTERRUPT 1 3114 #define MBX_INTR_WAIT 2 3115 #define MBX_UPDATE_FLASH_ACTIVE 3 3116 3117 struct mutex vport_lock; /* Virtual port synchronization */ 3118 spinlock_t vport_slock; /* order is hardware_lock, then vport_slock */ 3119 struct completion mbx_cmd_comp; /* Serialize mbx access */ 3120 struct completion mbx_intr_comp; /* Used for completion notification */ 3121 struct completion dcbx_comp; /* For set port config notification */ 3122 struct completion lb_portup_comp; /* Used to wait for link up during 3123 * loopback */ 3124 #define DCBX_COMP_TIMEOUT 20 3125 #define LB_PORTUP_COMP_TIMEOUT 10 3126 3127 int notify_dcbx_comp; 3128 int notify_lb_portup_comp; 3129 struct mutex selflogin_lock; 3130 3131 /* Basic firmware related information. */ 3132 uint16_t fw_major_version; 3133 uint16_t fw_minor_version; 3134 uint16_t fw_subminor_version; 3135 uint16_t fw_attributes; 3136 uint16_t fw_attributes_h; 3137 uint16_t fw_attributes_ext[2]; 3138 uint32_t fw_memory_size; 3139 uint32_t fw_transfer_size; 3140 uint32_t fw_srisc_address; 3141 #define RISC_START_ADDRESS_2100 0x1000 3142 #define RISC_START_ADDRESS_2300 0x800 3143 #define RISC_START_ADDRESS_2400 0x100000 3144 uint16_t fw_xcb_count; 3145 uint16_t fw_iocb_count; 3146 3147 uint32_t fw_shared_ram_start; 3148 uint32_t fw_shared_ram_end; 3149 3150 uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */ 3151 uint8_t fw_seriallink_options[4]; 3152 uint16_t fw_seriallink_options24[4]; 3153 3154 uint8_t mpi_version[3]; 3155 uint32_t mpi_capabilities; 3156 uint8_t phy_version[3]; 3157 3158 /* Firmware dump template */ 3159 void *fw_dump_template; 3160 uint32_t fw_dump_template_len; 3161 /* Firmware dump information. */ 3162 struct qla2xxx_fw_dump *fw_dump; 3163 uint32_t fw_dump_len; 3164 int fw_dumped; 3165 unsigned long fw_dump_cap_flags; 3166 #define RISC_PAUSE_CMPL 0 3167 #define DMA_SHUTDOWN_CMPL 1 3168 #define ISP_RESET_CMPL 2 3169 #define RISC_RDY_AFT_RESET 3 3170 #define RISC_SRAM_DUMP_CMPL 4 3171 #define RISC_EXT_MEM_DUMP_CMPL 5 3172 int fw_dump_reading; 3173 int prev_minidump_failed; 3174 dma_addr_t eft_dma; 3175 void *eft; 3176 /* Current size of mctp dump is 0x086064 bytes */ 3177 #define MCTP_DUMP_SIZE 0x086064 3178 dma_addr_t mctp_dump_dma; 3179 void *mctp_dump; 3180 int mctp_dumped; 3181 int mctp_dump_reading; 3182 uint32_t chain_offset; 3183 struct dentry *dfs_dir; 3184 struct dentry *dfs_fce; 3185 dma_addr_t fce_dma; 3186 void *fce; 3187 uint32_t fce_bufs; 3188 uint16_t fce_mb[8]; 3189 uint64_t fce_wr, fce_rd; 3190 struct mutex fce_mutex; 3191 3192 uint32_t pci_attr; 3193 uint16_t chip_revision; 3194 3195 uint16_t product_id[4]; 3196 3197 uint8_t model_number[16+1]; 3198 #define BINZERO "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" 3199 char model_desc[80]; 3200 uint8_t adapter_id[16+1]; 3201 3202 /* Option ROM information. */ 3203 char *optrom_buffer; 3204 uint32_t optrom_size; 3205 int optrom_state; 3206 #define QLA_SWAITING 0 3207 #define QLA_SREADING 1 3208 #define QLA_SWRITING 2 3209 uint32_t optrom_region_start; 3210 uint32_t optrom_region_size; 3211 struct mutex optrom_mutex; 3212 3213 /* PCI expansion ROM image information. */ 3214 #define ROM_CODE_TYPE_BIOS 0 3215 #define ROM_CODE_TYPE_FCODE 1 3216 #define ROM_CODE_TYPE_EFI 3 3217 uint8_t bios_revision[2]; 3218 uint8_t efi_revision[2]; 3219 uint8_t fcode_revision[16]; 3220 uint32_t fw_revision[4]; 3221 3222 uint32_t gold_fw_version[4]; 3223 3224 /* Offsets for flash/nvram access (set to ~0 if not used). */ 3225 uint32_t flash_conf_off; 3226 uint32_t flash_data_off; 3227 uint32_t nvram_conf_off; 3228 uint32_t nvram_data_off; 3229 3230 uint32_t fdt_wrt_disable; 3231 uint32_t fdt_wrt_enable; 3232 uint32_t fdt_erase_cmd; 3233 uint32_t fdt_block_size; 3234 uint32_t fdt_unprotect_sec_cmd; 3235 uint32_t fdt_protect_sec_cmd; 3236 uint32_t fdt_wrt_sts_reg_cmd; 3237 3238 uint32_t flt_region_flt; 3239 uint32_t flt_region_fdt; 3240 uint32_t flt_region_boot; 3241 uint32_t flt_region_fw; 3242 uint32_t flt_region_vpd_nvram; 3243 uint32_t flt_region_vpd; 3244 uint32_t flt_region_nvram; 3245 uint32_t flt_region_npiv_conf; 3246 uint32_t flt_region_gold_fw; 3247 uint32_t flt_region_fcp_prio; 3248 uint32_t flt_region_bootload; 3249 3250 /* Needed for BEACON */ 3251 uint16_t beacon_blink_led; 3252 uint8_t beacon_color_state; 3253 #define QLA_LED_GRN_ON 0x01 3254 #define QLA_LED_YLW_ON 0x02 3255 #define QLA_LED_ABR_ON 0x04 3256 #define QLA_LED_ALL_ON 0x07 /* yellow, green, amber. */ 3257 /* ISP2322: red, green, amber. */ 3258 uint16_t zio_mode; 3259 uint16_t zio_timer; 3260 3261 struct qla_msix_entry *msix_entries; 3262 3263 struct list_head vp_list; /* list of VP */ 3264 unsigned long vp_idx_map[(MAX_MULTI_ID_FABRIC / 8) / 3265 sizeof(unsigned long)]; 3266 uint16_t num_vhosts; /* number of vports created */ 3267 uint16_t num_vsans; /* number of vsan created */ 3268 uint16_t max_npiv_vports; /* 63 or 125 per topoloty */ 3269 int cur_vport_count; 3270 3271 struct qla_chip_state_84xx *cs84xx; 3272 struct qla_statistics qla_stats; 3273 struct isp_operations *isp_ops; 3274 struct workqueue_struct *wq; 3275 struct qlfc_fw fw_buf; 3276 3277 /* FCP_CMND priority support */ 3278 struct qla_fcp_prio_cfg *fcp_prio_cfg; 3279 3280 struct dma_pool *dl_dma_pool; 3281 #define DSD_LIST_DMA_POOL_SIZE 512 3282 3283 struct dma_pool *fcp_cmnd_dma_pool; 3284 mempool_t *ctx_mempool; 3285 #define FCP_CMND_DMA_POOL_SIZE 512 3286 3287 unsigned long nx_pcibase; /* Base I/O address */ 3288 uint8_t *nxdb_rd_ptr; /* Doorbell read pointer */ 3289 unsigned long nxdb_wr_ptr; /* Door bell write pointer */ 3290 3291 uint32_t crb_win; 3292 uint32_t curr_window; 3293 uint32_t ddr_mn_window; 3294 unsigned long mn_win_crb; 3295 unsigned long ms_win_crb; 3296 int qdr_sn_window; 3297 uint32_t fcoe_dev_init_timeout; 3298 uint32_t fcoe_reset_timeout; 3299 rwlock_t hw_lock; 3300 uint16_t portnum; /* port number */ 3301 int link_width; 3302 struct fw_blob *hablob; 3303 struct qla82xx_legacy_intr_set nx_legacy_intr; 3304 3305 uint16_t gbl_dsd_inuse; 3306 uint16_t gbl_dsd_avail; 3307 struct list_head gbl_dsd_list; 3308 #define NUM_DSD_CHAIN 4096 3309 3310 uint8_t fw_type; 3311 __le32 file_prd_off; /* File firmware product offset */ 3312 3313 uint32_t md_template_size; 3314 void *md_tmplt_hdr; 3315 dma_addr_t md_tmplt_hdr_dma; 3316 void *md_dump; 3317 uint32_t md_dump_size; 3318 3319 void *loop_id_map; 3320 3321 /* QLA83XX IDC specific fields */ 3322 uint32_t idc_audit_ts; 3323 uint32_t idc_extend_tmo; 3324 3325 /* DPC low-priority workqueue */ 3326 struct workqueue_struct *dpc_lp_wq; 3327 struct work_struct idc_aen; 3328 /* DPC high-priority workqueue */ 3329 struct workqueue_struct *dpc_hp_wq; 3330 struct work_struct nic_core_reset; 3331 struct work_struct idc_state_handler; 3332 struct work_struct nic_core_unrecoverable; 3333 struct work_struct board_disable; 3334 3335 struct mr_data_fx00 mr; 3336 3337 struct qlt_hw_data tgt; 3338 int allow_cna_fw_dump; 3339 }; 3340 3341 /* 3342 * Qlogic scsi host structure 3343 */ 3344 typedef struct scsi_qla_host { 3345 struct list_head list; 3346 struct list_head vp_fcports; /* list of fcports */ 3347 struct list_head work_list; 3348 spinlock_t work_lock; 3349 3350 /* Commonly used flags and state information. */ 3351 struct Scsi_Host *host; 3352 unsigned long host_no; 3353 uint8_t host_str[16]; 3354 3355 volatile struct { 3356 uint32_t init_done :1; 3357 uint32_t online :1; 3358 uint32_t reset_active :1; 3359 3360 uint32_t management_server_logged_in :1; 3361 uint32_t process_response_queue :1; 3362 uint32_t difdix_supported:1; 3363 uint32_t delete_progress:1; 3364 3365 uint32_t fw_tgt_reported:1; 3366 } flags; 3367 3368 atomic_t loop_state; 3369 #define LOOP_TIMEOUT 1 3370 #define LOOP_DOWN 2 3371 #define LOOP_UP 3 3372 #define LOOP_UPDATE 4 3373 #define LOOP_READY 5 3374 #define LOOP_DEAD 6 3375 3376 unsigned long dpc_flags; 3377 #define RESET_MARKER_NEEDED 0 /* Send marker to ISP. */ 3378 #define RESET_ACTIVE 1 3379 #define ISP_ABORT_NEEDED 2 /* Initiate ISP abort. */ 3380 #define ABORT_ISP_ACTIVE 3 /* ISP abort in progress. */ 3381 #define LOOP_RESYNC_NEEDED 4 /* Device Resync needed. */ 3382 #define LOOP_RESYNC_ACTIVE 5 3383 #define LOCAL_LOOP_UPDATE 6 /* Perform a local loop update. */ 3384 #define RSCN_UPDATE 7 /* Perform an RSCN update. */ 3385 #define RELOGIN_NEEDED 8 3386 #define REGISTER_FC4_NEEDED 9 /* SNS FC4 registration required. */ 3387 #define ISP_ABORT_RETRY 10 /* ISP aborted. */ 3388 #define BEACON_BLINK_NEEDED 11 3389 #define REGISTER_FDMI_NEEDED 12 3390 #define FCPORT_UPDATE_NEEDED 13 3391 #define VP_DPC_NEEDED 14 /* wake up for VP dpc handling */ 3392 #define UNLOADING 15 3393 #define NPIV_CONFIG_NEEDED 16 3394 #define ISP_UNRECOVERABLE 17 3395 #define FCOE_CTX_RESET_NEEDED 18 /* Initiate FCoE context reset */ 3396 #define MPI_RESET_NEEDED 19 /* Initiate MPI FW reset */ 3397 #define ISP_QUIESCE_NEEDED 20 /* Driver need some quiescence */ 3398 #define SCR_PENDING 21 /* SCR in target mode */ 3399 #define PORT_UPDATE_NEEDED 22 3400 #define FX00_RESET_RECOVERY 23 3401 #define FX00_TARGET_SCAN 24 3402 #define FX00_CRITEMP_RECOVERY 25 3403 #define FX00_HOST_INFO_RESEND 26 3404 3405 uint32_t device_flags; 3406 #define SWITCH_FOUND BIT_0 3407 #define DFLG_NO_CABLE BIT_1 3408 #define DFLG_DEV_FAILED BIT_5 3409 3410 /* ISP configuration data. */ 3411 uint16_t loop_id; /* Host adapter loop id */ 3412 uint16_t self_login_loop_id; /* host adapter loop id 3413 * get it on self login 3414 */ 3415 fc_port_t bidir_fcport; /* fcport used for bidir cmnds 3416 * no need of allocating it for 3417 * each command 3418 */ 3419 3420 port_id_t d_id; /* Host adapter port id */ 3421 uint8_t marker_needed; 3422 uint16_t mgmt_svr_loop_id; 3423 3424 3425 3426 /* Timeout timers. */ 3427 uint8_t loop_down_abort_time; /* port down timer */ 3428 atomic_t loop_down_timer; /* loop down timer */ 3429 uint8_t link_down_timeout; /* link down timeout */ 3430 3431 uint32_t timer_active; 3432 struct timer_list timer; 3433 3434 uint8_t node_name[WWN_SIZE]; 3435 uint8_t port_name[WWN_SIZE]; 3436 uint8_t fabric_node_name[WWN_SIZE]; 3437 3438 uint16_t fcoe_vlan_id; 3439 uint16_t fcoe_fcf_idx; 3440 uint8_t fcoe_vn_port_mac[6]; 3441 3442 uint32_t vp_abort_cnt; 3443 3444 struct fc_vport *fc_vport; /* holds fc_vport * for each vport */ 3445 uint16_t vp_idx; /* vport ID */ 3446 3447 unsigned long vp_flags; 3448 #define VP_IDX_ACQUIRED 0 /* bit no 0 */ 3449 #define VP_CREATE_NEEDED 1 3450 #define VP_BIND_NEEDED 2 3451 #define VP_DELETE_NEEDED 3 3452 #define VP_SCR_NEEDED 4 /* State Change Request registration */ 3453 atomic_t vp_state; 3454 #define VP_OFFLINE 0 3455 #define VP_ACTIVE 1 3456 #define VP_FAILED 2 3457 // #define VP_DISABLE 3 3458 uint16_t vp_err_state; 3459 uint16_t vp_prev_err_state; 3460 #define VP_ERR_UNKWN 0 3461 #define VP_ERR_PORTDWN 1 3462 #define VP_ERR_FAB_UNSUPPORTED 2 3463 #define VP_ERR_FAB_NORESOURCES 3 3464 #define VP_ERR_FAB_LOGOUT 4 3465 #define VP_ERR_ADAP_NORESOURCES 5 3466 struct qla_hw_data *hw; 3467 struct scsi_qlt_host vha_tgt; 3468 struct req_que *req; 3469 int fw_heartbeat_counter; 3470 int seconds_since_last_heartbeat; 3471 struct fc_host_statistics fc_host_stat; 3472 struct qla_statistics qla_stats; 3473 struct bidi_statistics bidi_stats; 3474 3475 atomic_t vref_count; 3476 struct qla8044_reset_template reset_tmplt; 3477 } scsi_qla_host_t; 3478 3479 #define SET_VP_IDX 1 3480 #define SET_AL_PA 2 3481 #define RESET_VP_IDX 3 3482 #define RESET_AL_PA 4 3483 struct qla_tgt_vp_map { 3484 uint8_t idx; 3485 scsi_qla_host_t *vha; 3486 }; 3487 3488 /* 3489 * Macros to help code, maintain, etc. 3490 */ 3491 #define LOOP_TRANSITION(ha) \ 3492 (test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \ 3493 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \ 3494 atomic_read(&ha->loop_state) == LOOP_DOWN) 3495 3496 #define STATE_TRANSITION(ha) \ 3497 (test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \ 3498 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) 3499 3500 #define QLA_VHA_MARK_BUSY(__vha, __bail) do { \ 3501 atomic_inc(&__vha->vref_count); \ 3502 mb(); \ 3503 if (__vha->flags.delete_progress) { \ 3504 atomic_dec(&__vha->vref_count); \ 3505 __bail = 1; \ 3506 } else { \ 3507 __bail = 0; \ 3508 } \ 3509 } while (0) 3510 3511 #define QLA_VHA_MARK_NOT_BUSY(__vha) do { \ 3512 atomic_dec(&__vha->vref_count); \ 3513 } while (0) 3514 3515 /* 3516 * qla2x00 local function return status codes 3517 */ 3518 #define MBS_MASK 0x3fff 3519 3520 #define QLA_SUCCESS (MBS_COMMAND_COMPLETE & MBS_MASK) 3521 #define QLA_INVALID_COMMAND (MBS_INVALID_COMMAND & MBS_MASK) 3522 #define QLA_INTERFACE_ERROR (MBS_HOST_INTERFACE_ERROR & MBS_MASK) 3523 #define QLA_TEST_FAILED (MBS_TEST_FAILED & MBS_MASK) 3524 #define QLA_COMMAND_ERROR (MBS_COMMAND_ERROR & MBS_MASK) 3525 #define QLA_PARAMETER_ERROR (MBS_COMMAND_PARAMETER_ERROR & MBS_MASK) 3526 #define QLA_PORT_ID_USED (MBS_PORT_ID_USED & MBS_MASK) 3527 #define QLA_LOOP_ID_USED (MBS_LOOP_ID_USED & MBS_MASK) 3528 #define QLA_ALL_IDS_IN_USE (MBS_ALL_IDS_IN_USE & MBS_MASK) 3529 #define QLA_NOT_LOGGED_IN (MBS_NOT_LOGGED_IN & MBS_MASK) 3530 3531 #define QLA_FUNCTION_TIMEOUT 0x100 3532 #define QLA_FUNCTION_PARAMETER_ERROR 0x101 3533 #define QLA_FUNCTION_FAILED 0x102 3534 #define QLA_MEMORY_ALLOC_FAILED 0x103 3535 #define QLA_LOCK_TIMEOUT 0x104 3536 #define QLA_ABORTED 0x105 3537 #define QLA_SUSPENDED 0x106 3538 #define QLA_BUSY 0x107 3539 #define QLA_ALREADY_REGISTERED 0x109 3540 3541 #define NVRAM_DELAY() udelay(10) 3542 3543 /* 3544 * Flash support definitions 3545 */ 3546 #define OPTROM_SIZE_2300 0x20000 3547 #define OPTROM_SIZE_2322 0x100000 3548 #define OPTROM_SIZE_24XX 0x100000 3549 #define OPTROM_SIZE_25XX 0x200000 3550 #define OPTROM_SIZE_81XX 0x400000 3551 #define OPTROM_SIZE_82XX 0x800000 3552 #define OPTROM_SIZE_83XX 0x1000000 3553 3554 #define OPTROM_BURST_SIZE 0x1000 3555 #define OPTROM_BURST_DWORDS (OPTROM_BURST_SIZE / 4) 3556 3557 #define QLA_DSDS_PER_IOCB 37 3558 3559 #define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr) 3560 3561 #define QLA_SG_ALL 1024 3562 3563 enum nexus_wait_type { 3564 WAIT_HOST = 0, 3565 WAIT_TARGET, 3566 WAIT_LUN, 3567 }; 3568 3569 #include "qla_gbl.h" 3570 #include "qla_dbg.h" 3571 #include "qla_inline.h" 3572 #endif 3573