xref: /openbmc/linux/drivers/scsi/pm8001/pm8001_sas.c (revision b6dcefde)
1 /*
2  * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
3  *
4  * Copyright (c) 2008-2009 USI Co., Ltd.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification.
13  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14  *    substantially similar to the "NO WARRANTY" disclaimer below
15  *    ("Disclaimer") and any redistribution must be conditioned upon
16  *    including a substantially similar Disclaimer requirement for further
17  *    binary redistribution.
18  * 3. Neither the names of the above-listed copyright holders nor the names
19  *    of any contributors may be used to endorse or promote products derived
20  *    from this software without specific prior written permission.
21  *
22  * Alternatively, this software may be distributed under the terms of the
23  * GNU General Public License ("GPL") version 2 as published by the Free
24  * Software Foundation.
25  *
26  * NO WARRANTY
27  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37  * POSSIBILITY OF SUCH DAMAGES.
38  *
39  */
40 
41 #include "pm8001_sas.h"
42 
43 /**
44  * pm8001_find_tag - from sas task to find out  tag that belongs to this task
45  * @task: the task sent to the LLDD
46  * @tag: the found tag associated with the task
47  */
48 static int pm8001_find_tag(struct sas_task *task, u32 *tag)
49 {
50 	if (task->lldd_task) {
51 		struct pm8001_ccb_info *ccb;
52 		ccb = task->lldd_task;
53 		*tag = ccb->ccb_tag;
54 		return 1;
55 	}
56 	return 0;
57 }
58 
59 /**
60   * pm8001_tag_clear - clear the tags bitmap
61   * @pm8001_ha: our hba struct
62   * @tag: the found tag associated with the task
63   */
64 static void pm8001_tag_clear(struct pm8001_hba_info *pm8001_ha, u32 tag)
65 {
66 	void *bitmap = pm8001_ha->tags;
67 	clear_bit(tag, bitmap);
68 }
69 
70 static void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
71 {
72 	pm8001_tag_clear(pm8001_ha, tag);
73 }
74 
75 static void pm8001_tag_set(struct pm8001_hba_info *pm8001_ha, u32 tag)
76 {
77 	void *bitmap = pm8001_ha->tags;
78 	set_bit(tag, bitmap);
79 }
80 
81 /**
82   * pm8001_tag_alloc - allocate a empty tag for task used.
83   * @pm8001_ha: our hba struct
84   * @tag_out: the found empty tag .
85   */
86 inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
87 {
88 	unsigned int index, tag;
89 	void *bitmap = pm8001_ha->tags;
90 
91 	index = find_first_zero_bit(bitmap, pm8001_ha->tags_num);
92 	tag = index;
93 	if (tag >= pm8001_ha->tags_num)
94 		return -SAS_QUEUE_FULL;
95 	pm8001_tag_set(pm8001_ha, tag);
96 	*tag_out = tag;
97 	return 0;
98 }
99 
100 void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
101 {
102 	int i;
103 	for (i = 0; i < pm8001_ha->tags_num; ++i)
104 		pm8001_tag_clear(pm8001_ha, i);
105 }
106 
107  /**
108   * pm8001_mem_alloc - allocate memory for pm8001.
109   * @pdev: pci device.
110   * @virt_addr: the allocated virtual address
111   * @pphys_addr_hi: the physical address high byte address.
112   * @pphys_addr_lo: the physical address low byte address.
113   * @mem_size: memory size.
114   */
115 int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
116 	dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
117 	u32 *pphys_addr_lo, u32 mem_size, u32 align)
118 {
119 	caddr_t mem_virt_alloc;
120 	dma_addr_t mem_dma_handle;
121 	u64 phys_align;
122 	u64 align_offset = 0;
123 	if (align)
124 		align_offset = (dma_addr_t)align - 1;
125 	mem_virt_alloc =
126 		pci_alloc_consistent(pdev, mem_size + align, &mem_dma_handle);
127 	if (!mem_virt_alloc) {
128 		pm8001_printk("memory allocation error\n");
129 		return -1;
130 	}
131 	memset((void *)mem_virt_alloc, 0, mem_size+align);
132 	*pphys_addr = mem_dma_handle;
133 	phys_align = (*pphys_addr + align_offset) & ~align_offset;
134 	*virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
135 	*pphys_addr_hi = upper_32_bits(phys_align);
136 	*pphys_addr_lo = lower_32_bits(phys_align);
137 	return 0;
138 }
139 /**
140   * pm8001_find_ha_by_dev - from domain device which come from sas layer to
141   * find out our hba struct.
142   * @dev: the domain device which from sas layer.
143   */
144 static
145 struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
146 {
147 	struct sas_ha_struct *sha = dev->port->ha;
148 	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
149 	return pm8001_ha;
150 }
151 
152 /**
153   * pm8001_phy_control - this function should be registered to
154   * sas_domain_function_template to provide libsas used, note: this is just
155   * control the HBA phy rather than other expander phy if you want control
156   * other phy, you should use SMP command.
157   * @sas_phy: which phy in HBA phys.
158   * @func: the operation.
159   * @funcdata: always NULL.
160   */
161 int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
162 	void *funcdata)
163 {
164 	int rc = 0, phy_id = sas_phy->id;
165 	struct pm8001_hba_info *pm8001_ha = NULL;
166 	struct sas_phy_linkrates *rates;
167 	DECLARE_COMPLETION_ONSTACK(completion);
168 	pm8001_ha = sas_phy->ha->lldd_ha;
169 	pm8001_ha->phy[phy_id].enable_completion = &completion;
170 	switch (func) {
171 	case PHY_FUNC_SET_LINK_RATE:
172 		rates = funcdata;
173 		if (rates->minimum_linkrate) {
174 			pm8001_ha->phy[phy_id].minimum_linkrate =
175 				rates->minimum_linkrate;
176 		}
177 		if (rates->maximum_linkrate) {
178 			pm8001_ha->phy[phy_id].maximum_linkrate =
179 				rates->maximum_linkrate;
180 		}
181 		if (pm8001_ha->phy[phy_id].phy_state == 0) {
182 			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
183 			wait_for_completion(&completion);
184 		}
185 		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
186 					      PHY_LINK_RESET);
187 		break;
188 	case PHY_FUNC_HARD_RESET:
189 		if (pm8001_ha->phy[phy_id].phy_state == 0) {
190 			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
191 			wait_for_completion(&completion);
192 		}
193 		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
194 					      PHY_HARD_RESET);
195 		break;
196 	case PHY_FUNC_LINK_RESET:
197 		if (pm8001_ha->phy[phy_id].phy_state == 0) {
198 			PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
199 			wait_for_completion(&completion);
200 		}
201 		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
202 					      PHY_LINK_RESET);
203 		break;
204 	case PHY_FUNC_RELEASE_SPINUP_HOLD:
205 		PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
206 					      PHY_LINK_RESET);
207 		break;
208 	case PHY_FUNC_DISABLE:
209 		PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
210 		break;
211 	default:
212 		rc = -EOPNOTSUPP;
213 	}
214 	msleep(300);
215 	return rc;
216 }
217 
218 int pm8001_slave_alloc(struct scsi_device *scsi_dev)
219 {
220 	struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
221 	if (dev_is_sata(dev)) {
222 		/* We don't need to rescan targets
223 		* if REPORT_LUNS request is failed
224 		*/
225 		if (scsi_dev->lun > 0)
226 			return -ENXIO;
227 		scsi_dev->tagged_supported = 1;
228 	}
229 	return sas_slave_alloc(scsi_dev);
230 }
231 
232 /**
233   * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
234   * command to HBA.
235   * @shost: the scsi host data.
236   */
237 void pm8001_scan_start(struct Scsi_Host *shost)
238 {
239 	int i;
240 	struct pm8001_hba_info *pm8001_ha;
241 	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
242 	pm8001_ha = sha->lldd_ha;
243 	PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
244 	for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
245 		PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
246 }
247 
248 int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
249 {
250 	/* give the phy enabling interrupt event time to come in (1s
251 	* is empirically about all it takes) */
252 	if (time < HZ)
253 		return 0;
254 	/* Wait for discovery to finish */
255 	scsi_flush_work(shost);
256 	return 1;
257 }
258 
259 /**
260   * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
261   * @pm8001_ha: our hba card information
262   * @ccb: the ccb which attached to smp task
263   */
264 static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
265 	struct pm8001_ccb_info *ccb)
266 {
267 	return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
268 }
269 
270 u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
271 {
272 	struct ata_queued_cmd *qc = task->uldd_task;
273 	if (qc) {
274 		if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
275 			qc->tf.command == ATA_CMD_FPDMA_READ) {
276 			*tag = qc->tag;
277 			return 1;
278 		}
279 	}
280 	return 0;
281 }
282 
283 /**
284   * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
285   * @pm8001_ha: our hba card information
286   * @ccb: the ccb which attached to sata task
287   */
288 static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
289 	struct pm8001_ccb_info *ccb)
290 {
291 	return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
292 }
293 
294 /**
295   * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
296   * @pm8001_ha: our hba card information
297   * @ccb: the ccb which attached to TM
298   * @tmf: the task management IU
299   */
300 static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
301 	struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
302 {
303 	return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
304 }
305 
306 /**
307   * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
308   * @pm8001_ha: our hba card information
309   * @ccb: the ccb which attached to ssp task
310   */
311 static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
312 	struct pm8001_ccb_info *ccb)
313 {
314 	return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
315 }
316 int pm8001_slave_configure(struct scsi_device *sdev)
317 {
318 	struct domain_device *dev = sdev_to_domain_dev(sdev);
319 	int ret = sas_slave_configure(sdev);
320 	if (ret)
321 		return ret;
322 	if (dev_is_sata(dev)) {
323 	#ifdef PM8001_DISABLE_NCQ
324 		struct ata_port *ap = dev->sata_dev.ap;
325 		struct ata_device *adev = ap->link.device;
326 		adev->flags |= ATA_DFLAG_NCQ_OFF;
327 		scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
328 	#endif
329 	}
330 	return 0;
331 }
332  /* Find the local port id that's attached to this device */
333 static int sas_find_local_port_id(struct domain_device *dev)
334 {
335 	struct domain_device *pdev = dev->parent;
336 
337 	/* Directly attached device */
338 	if (!pdev)
339 		return dev->port->id;
340 	while (pdev) {
341 		struct domain_device *pdev_p = pdev->parent;
342 		if (!pdev_p)
343 			return pdev->port->id;
344 		pdev = pdev->parent;
345 	}
346 	return 0;
347 }
348 
349 /**
350   * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
351   * @task: the task to be execute.
352   * @num: if can_queue great than 1, the task can be queued up. for SMP task,
353   * we always execute one one time.
354   * @gfp_flags: gfp_flags.
355   * @is_tmf: if it is task management task.
356   * @tmf: the task management IU
357   */
358 #define DEV_IS_GONE(pm8001_dev)	\
359 	((!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE)))
360 static int pm8001_task_exec(struct sas_task *task, const int num,
361 	gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
362 {
363 	struct domain_device *dev = task->dev;
364 	struct pm8001_hba_info *pm8001_ha;
365 	struct pm8001_device *pm8001_dev;
366 	struct pm8001_port *port = NULL;
367 	struct sas_task *t = task;
368 	struct pm8001_ccb_info *ccb;
369 	u32 tag = 0xdeadbeef, rc, n_elem = 0;
370 	u32 n = num;
371 	unsigned long flags = 0, flags_libsas = 0;
372 
373 	if (!dev->port) {
374 		struct task_status_struct *tsm = &t->task_status;
375 		tsm->resp = SAS_TASK_UNDELIVERED;
376 		tsm->stat = SAS_PHY_DOWN;
377 		if (dev->dev_type != SATA_DEV)
378 			t->task_done(t);
379 		return 0;
380 	}
381 	pm8001_ha = pm8001_find_ha_by_dev(task->dev);
382 	PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
383 	spin_lock_irqsave(&pm8001_ha->lock, flags);
384 	do {
385 		dev = t->dev;
386 		pm8001_dev = dev->lldd_dev;
387 		if (DEV_IS_GONE(pm8001_dev)) {
388 			if (pm8001_dev) {
389 				PM8001_IO_DBG(pm8001_ha,
390 					pm8001_printk("device %d not ready.\n",
391 					pm8001_dev->device_id));
392 			} else {
393 				PM8001_IO_DBG(pm8001_ha,
394 					pm8001_printk("device %016llx not "
395 					"ready.\n", SAS_ADDR(dev->sas_addr)));
396 			}
397 			rc = SAS_PHY_DOWN;
398 			goto out_done;
399 		}
400 		port = &pm8001_ha->port[sas_find_local_port_id(dev)];
401 		if (!port->port_attached) {
402 			if (sas_protocol_ata(t->task_proto)) {
403 				struct task_status_struct *ts = &t->task_status;
404 				ts->resp = SAS_TASK_UNDELIVERED;
405 				ts->stat = SAS_PHY_DOWN;
406 
407 				spin_unlock_irqrestore(&pm8001_ha->lock, flags);
408 				spin_unlock_irqrestore(dev->sata_dev.ap->lock,
409 						flags_libsas);
410 				t->task_done(t);
411 				spin_lock_irqsave(dev->sata_dev.ap->lock,
412 					flags_libsas);
413 				spin_lock_irqsave(&pm8001_ha->lock, flags);
414 				if (n > 1)
415 					t = list_entry(t->list.next,
416 							struct sas_task, list);
417 				continue;
418 			} else {
419 				struct task_status_struct *ts = &t->task_status;
420 				ts->resp = SAS_TASK_UNDELIVERED;
421 				ts->stat = SAS_PHY_DOWN;
422 				t->task_done(t);
423 				if (n > 1)
424 					t = list_entry(t->list.next,
425 							struct sas_task, list);
426 				continue;
427 			}
428 		}
429 		rc = pm8001_tag_alloc(pm8001_ha, &tag);
430 		if (rc)
431 			goto err_out;
432 		ccb = &pm8001_ha->ccb_info[tag];
433 
434 		if (!sas_protocol_ata(t->task_proto)) {
435 			if (t->num_scatter) {
436 				n_elem = dma_map_sg(pm8001_ha->dev,
437 					t->scatter,
438 					t->num_scatter,
439 					t->data_dir);
440 				if (!n_elem) {
441 					rc = -ENOMEM;
442 					goto err_out_tag;
443 				}
444 			}
445 		} else {
446 			n_elem = t->num_scatter;
447 		}
448 
449 		t->lldd_task = ccb;
450 		ccb->n_elem = n_elem;
451 		ccb->ccb_tag = tag;
452 		ccb->task = t;
453 		switch (t->task_proto) {
454 		case SAS_PROTOCOL_SMP:
455 			rc = pm8001_task_prep_smp(pm8001_ha, ccb);
456 			break;
457 		case SAS_PROTOCOL_SSP:
458 			if (is_tmf)
459 				rc = pm8001_task_prep_ssp_tm(pm8001_ha,
460 					ccb, tmf);
461 			else
462 				rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
463 			break;
464 		case SAS_PROTOCOL_SATA:
465 		case SAS_PROTOCOL_STP:
466 		case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
467 			rc = pm8001_task_prep_ata(pm8001_ha, ccb);
468 			break;
469 		default:
470 			dev_printk(KERN_ERR, pm8001_ha->dev,
471 				"unknown sas_task proto: 0x%x\n",
472 				t->task_proto);
473 			rc = -EINVAL;
474 			break;
475 		}
476 
477 		if (rc) {
478 			PM8001_IO_DBG(pm8001_ha,
479 				pm8001_printk("rc is %x\n", rc));
480 			goto err_out_tag;
481 		}
482 		/* TODO: select normal or high priority */
483 		spin_lock(&t->task_state_lock);
484 		t->task_state_flags |= SAS_TASK_AT_INITIATOR;
485 		spin_unlock(&t->task_state_lock);
486 		pm8001_dev->running_req++;
487 		if (n > 1)
488 			t = list_entry(t->list.next, struct sas_task, list);
489 	} while (--n);
490 	rc = 0;
491 	goto out_done;
492 
493 err_out_tag:
494 	pm8001_tag_free(pm8001_ha, tag);
495 err_out:
496 	dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
497 	if (!sas_protocol_ata(t->task_proto))
498 		if (n_elem)
499 			dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
500 				t->data_dir);
501 out_done:
502 	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
503 	return rc;
504 }
505 
506 /**
507   * pm8001_queue_command - register for upper layer used, all IO commands sent
508   * to HBA are from this interface.
509   * @task: the task to be execute.
510   * @num: if can_queue great than 1, the task can be queued up. for SMP task,
511   * we always execute one one time
512   * @gfp_flags: gfp_flags
513   */
514 int pm8001_queue_command(struct sas_task *task, const int num,
515 		gfp_t gfp_flags)
516 {
517 	return pm8001_task_exec(task, num, gfp_flags, 0, NULL);
518 }
519 
520 void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha, u32 ccb_idx)
521 {
522 	pm8001_tag_clear(pm8001_ha, ccb_idx);
523 }
524 
525 /**
526   * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
527   * @pm8001_ha: our hba card information
528   * @ccb: the ccb which attached to ssp task
529   * @task: the task to be free.
530   * @ccb_idx: ccb index.
531   */
532 void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
533 	struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx)
534 {
535 	if (!ccb->task)
536 		return;
537 	if (!sas_protocol_ata(task->task_proto))
538 		if (ccb->n_elem)
539 			dma_unmap_sg(pm8001_ha->dev, task->scatter,
540 				task->num_scatter, task->data_dir);
541 
542 	switch (task->task_proto) {
543 	case SAS_PROTOCOL_SMP:
544 		dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
545 			PCI_DMA_FROMDEVICE);
546 		dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
547 			PCI_DMA_TODEVICE);
548 		break;
549 
550 	case SAS_PROTOCOL_SATA:
551 	case SAS_PROTOCOL_STP:
552 	case SAS_PROTOCOL_SSP:
553 	default:
554 		/* do nothing */
555 		break;
556 	}
557 	task->lldd_task = NULL;
558 	ccb->task = NULL;
559 	ccb->ccb_tag = 0xFFFFFFFF;
560 	pm8001_ccb_free(pm8001_ha, ccb_idx);
561 }
562 
563  /**
564   * pm8001_alloc_dev - find a empty pm8001_device
565   * @pm8001_ha: our hba card information
566   */
567 struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
568 {
569 	u32 dev;
570 	for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
571 		if (pm8001_ha->devices[dev].dev_type == NO_DEVICE) {
572 			pm8001_ha->devices[dev].id = dev;
573 			return &pm8001_ha->devices[dev];
574 		}
575 	}
576 	if (dev == PM8001_MAX_DEVICES) {
577 		PM8001_FAIL_DBG(pm8001_ha,
578 			pm8001_printk("max support %d devices, ignore ..\n",
579 			PM8001_MAX_DEVICES));
580 	}
581 	return NULL;
582 }
583 
584 static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
585 {
586 	u32 id = pm8001_dev->id;
587 	memset(pm8001_dev, 0, sizeof(*pm8001_dev));
588 	pm8001_dev->id = id;
589 	pm8001_dev->dev_type = NO_DEVICE;
590 	pm8001_dev->device_id = PM8001_MAX_DEVICES;
591 	pm8001_dev->sas_device = NULL;
592 }
593 
594 /**
595   * pm8001_dev_found_notify - libsas notify a device is found.
596   * @dev: the device structure which sas layer used.
597   *
598   * when libsas find a sas domain device, it should tell the LLDD that
599   * device is found, and then LLDD register this device to HBA firmware
600   * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
601   * device ID(according to device's sas address) and returned it to LLDD. From
602   * now on, we communicate with HBA FW with the device ID which HBA assigned
603   * rather than sas address. it is the neccessary step for our HBA but it is
604   * the optional for other HBA driver.
605   */
606 static int pm8001_dev_found_notify(struct domain_device *dev)
607 {
608 	unsigned long flags = 0;
609 	int res = 0;
610 	struct pm8001_hba_info *pm8001_ha = NULL;
611 	struct domain_device *parent_dev = dev->parent;
612 	struct pm8001_device *pm8001_device;
613 	DECLARE_COMPLETION_ONSTACK(completion);
614 	u32 flag = 0;
615 	pm8001_ha = pm8001_find_ha_by_dev(dev);
616 	spin_lock_irqsave(&pm8001_ha->lock, flags);
617 
618 	pm8001_device = pm8001_alloc_dev(pm8001_ha);
619 	if (!pm8001_device) {
620 		res = -1;
621 		goto found_out;
622 	}
623 	pm8001_device->sas_device = dev;
624 	dev->lldd_dev = pm8001_device;
625 	pm8001_device->dev_type = dev->dev_type;
626 	pm8001_device->dcompletion = &completion;
627 	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
628 		int phy_id;
629 		struct ex_phy *phy;
630 		for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
631 		phy_id++) {
632 			phy = &parent_dev->ex_dev.ex_phy[phy_id];
633 			if (SAS_ADDR(phy->attached_sas_addr)
634 				== SAS_ADDR(dev->sas_addr)) {
635 				pm8001_device->attached_phy = phy_id;
636 				break;
637 			}
638 		}
639 		if (phy_id == parent_dev->ex_dev.num_phys) {
640 			PM8001_FAIL_DBG(pm8001_ha,
641 			pm8001_printk("Error: no attached dev:%016llx"
642 			" at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
643 				SAS_ADDR(parent_dev->sas_addr)));
644 			res = -1;
645 		}
646 	} else {
647 		if (dev->dev_type == SATA_DEV) {
648 			pm8001_device->attached_phy =
649 				dev->rphy->identify.phy_identifier;
650 				flag = 1; /* directly sata*/
651 		}
652 	} /*register this device to HBA*/
653 	PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device \n"));
654 	PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
655 	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
656 	wait_for_completion(&completion);
657 	if (dev->dev_type == SAS_END_DEV)
658 		msleep(50);
659 	pm8001_ha->flags |= PM8001F_RUN_TIME ;
660 	return 0;
661 found_out:
662 	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
663 	return res;
664 }
665 
666 int pm8001_dev_found(struct domain_device *dev)
667 {
668 	return pm8001_dev_found_notify(dev);
669 }
670 
671 /**
672   * pm8001_alloc_task - allocate a task structure for TMF
673   */
674 static struct sas_task *pm8001_alloc_task(void)
675 {
676 	struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL);
677 	if (task) {
678 		INIT_LIST_HEAD(&task->list);
679 		spin_lock_init(&task->task_state_lock);
680 		task->task_state_flags = SAS_TASK_STATE_PENDING;
681 		init_timer(&task->timer);
682 		init_completion(&task->completion);
683 	}
684 	return task;
685 }
686 
687 static void pm8001_free_task(struct sas_task *task)
688 {
689 	if (task) {
690 		BUG_ON(!list_empty(&task->list));
691 		kfree(task);
692 	}
693 }
694 
695 static void pm8001_task_done(struct sas_task *task)
696 {
697 	if (!del_timer(&task->timer))
698 		return;
699 	complete(&task->completion);
700 }
701 
702 static void pm8001_tmf_timedout(unsigned long data)
703 {
704 	struct sas_task *task = (struct sas_task *)data;
705 
706 	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
707 	complete(&task->completion);
708 }
709 
710 #define PM8001_TASK_TIMEOUT 20
711 /**
712   * pm8001_exec_internal_tmf_task - execute some task management commands.
713   * @dev: the wanted device.
714   * @tmf: which task management wanted to be take.
715   * @para_len: para_len.
716   * @parameter: ssp task parameter.
717   *
718   * when errors or exception happened, we may want to do something, for example
719   * abort the issued task which result in this execption, it is done by calling
720   * this function, note it is also with the task execute interface.
721   */
722 static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
723 	void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
724 {
725 	int res, retry;
726 	struct sas_task *task = NULL;
727 	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
728 
729 	for (retry = 0; retry < 3; retry++) {
730 		task = pm8001_alloc_task();
731 		if (!task)
732 			return -ENOMEM;
733 
734 		task->dev = dev;
735 		task->task_proto = dev->tproto;
736 		memcpy(&task->ssp_task, parameter, para_len);
737 		task->task_done = pm8001_task_done;
738 		task->timer.data = (unsigned long)task;
739 		task->timer.function = pm8001_tmf_timedout;
740 		task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
741 		add_timer(&task->timer);
742 
743 		res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf);
744 
745 		if (res) {
746 			del_timer(&task->timer);
747 			PM8001_FAIL_DBG(pm8001_ha,
748 				pm8001_printk("Executing internal task "
749 				"failed\n"));
750 			goto ex_err;
751 		}
752 		wait_for_completion(&task->completion);
753 		res = -TMF_RESP_FUNC_FAILED;
754 		/* Even TMF timed out, return direct. */
755 		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
756 			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
757 				PM8001_FAIL_DBG(pm8001_ha,
758 					pm8001_printk("TMF task[%x]timeout.\n",
759 					tmf->tmf));
760 				goto ex_err;
761 			}
762 		}
763 
764 		if (task->task_status.resp == SAS_TASK_COMPLETE &&
765 			task->task_status.stat == SAM_GOOD) {
766 			res = TMF_RESP_FUNC_COMPLETE;
767 			break;
768 		}
769 
770 		if (task->task_status.resp == SAS_TASK_COMPLETE &&
771 		task->task_status.stat == SAS_DATA_UNDERRUN) {
772 			/* no error, but return the number of bytes of
773 			* underrun */
774 			res = task->task_status.residual;
775 			break;
776 		}
777 
778 		if (task->task_status.resp == SAS_TASK_COMPLETE &&
779 			task->task_status.stat == SAS_DATA_OVERRUN) {
780 			PM8001_FAIL_DBG(pm8001_ha,
781 				pm8001_printk("Blocked task error.\n"));
782 			res = -EMSGSIZE;
783 			break;
784 		} else {
785 			PM8001_EH_DBG(pm8001_ha,
786 				pm8001_printk(" Task to dev %016llx response:"
787 				"0x%x status 0x%x\n",
788 				SAS_ADDR(dev->sas_addr),
789 				task->task_status.resp,
790 				task->task_status.stat));
791 			pm8001_free_task(task);
792 			task = NULL;
793 		}
794 	}
795 ex_err:
796 	BUG_ON(retry == 3 && task != NULL);
797 	if (task != NULL)
798 		pm8001_free_task(task);
799 	return res;
800 }
801 
802 static int
803 pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
804 	struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag,
805 	u32 task_tag)
806 {
807 	int res, retry;
808 	u32 ccb_tag;
809 	struct pm8001_ccb_info *ccb;
810 	struct sas_task *task = NULL;
811 
812 	for (retry = 0; retry < 3; retry++) {
813 		task = pm8001_alloc_task();
814 		if (!task)
815 			return -ENOMEM;
816 
817 		task->dev = dev;
818 		task->task_proto = dev->tproto;
819 		task->task_done = pm8001_task_done;
820 		task->timer.data = (unsigned long)task;
821 		task->timer.function = pm8001_tmf_timedout;
822 		task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
823 		add_timer(&task->timer);
824 
825 		res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
826 		if (res)
827 			return res;
828 		ccb = &pm8001_ha->ccb_info[ccb_tag];
829 		ccb->device = pm8001_dev;
830 		ccb->ccb_tag = ccb_tag;
831 		ccb->task = task;
832 
833 		res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
834 			pm8001_dev, flag, task_tag, ccb_tag);
835 
836 		if (res) {
837 			del_timer(&task->timer);
838 			PM8001_FAIL_DBG(pm8001_ha,
839 				pm8001_printk("Executing internal task "
840 				"failed\n"));
841 			goto ex_err;
842 		}
843 		wait_for_completion(&task->completion);
844 		res = TMF_RESP_FUNC_FAILED;
845 		/* Even TMF timed out, return direct. */
846 		if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
847 			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
848 				PM8001_FAIL_DBG(pm8001_ha,
849 					pm8001_printk("TMF task timeout.\n"));
850 				goto ex_err;
851 			}
852 		}
853 
854 		if (task->task_status.resp == SAS_TASK_COMPLETE &&
855 			task->task_status.stat == SAM_GOOD) {
856 			res = TMF_RESP_FUNC_COMPLETE;
857 			break;
858 
859 		} else {
860 			PM8001_EH_DBG(pm8001_ha,
861 				pm8001_printk(" Task to dev %016llx response: "
862 					"0x%x status 0x%x\n",
863 				SAS_ADDR(dev->sas_addr),
864 				task->task_status.resp,
865 				task->task_status.stat));
866 			pm8001_free_task(task);
867 			task = NULL;
868 		}
869 	}
870 ex_err:
871 	BUG_ON(retry == 3 && task != NULL);
872 	if (task != NULL)
873 		pm8001_free_task(task);
874 	return res;
875 }
876 
877 /**
878   * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
879   * @dev: the device structure which sas layer used.
880   */
881 static void pm8001_dev_gone_notify(struct domain_device *dev)
882 {
883 	unsigned long flags = 0;
884 	u32 tag;
885 	struct pm8001_hba_info *pm8001_ha;
886 	struct pm8001_device *pm8001_dev = dev->lldd_dev;
887 	u32 device_id = pm8001_dev->device_id;
888 	pm8001_ha = pm8001_find_ha_by_dev(dev);
889 	spin_lock_irqsave(&pm8001_ha->lock, flags);
890 	pm8001_tag_alloc(pm8001_ha, &tag);
891 	if (pm8001_dev) {
892 		PM8001_DISC_DBG(pm8001_ha,
893 			pm8001_printk("found dev[%d:%x] is gone.\n",
894 			pm8001_dev->device_id, pm8001_dev->dev_type));
895 		if (pm8001_dev->running_req) {
896 			spin_unlock_irqrestore(&pm8001_ha->lock, flags);
897 			pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
898 				dev, 1, 0);
899 			spin_lock_irqsave(&pm8001_ha->lock, flags);
900 		}
901 		PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
902 		pm8001_free_dev(pm8001_dev);
903 	} else {
904 		PM8001_DISC_DBG(pm8001_ha,
905 			pm8001_printk("Found dev has gone.\n"));
906 	}
907 	dev->lldd_dev = NULL;
908 	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
909 }
910 
911 void pm8001_dev_gone(struct domain_device *dev)
912 {
913 	pm8001_dev_gone_notify(dev);
914 }
915 
916 static int pm8001_issue_ssp_tmf(struct domain_device *dev,
917 	u8 *lun, struct pm8001_tmf_task *tmf)
918 {
919 	struct sas_ssp_task ssp_task;
920 	if (!(dev->tproto & SAS_PROTOCOL_SSP))
921 		return TMF_RESP_FUNC_ESUPP;
922 
923 	strncpy((u8 *)&ssp_task.LUN, lun, 8);
924 	return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task),
925 		tmf);
926 }
927 
928 /**
929   * Standard mandates link reset for ATA  (type 0) and hard reset for
930   * SSP (type 1) , only for RECOVERY
931   */
932 int pm8001_I_T_nexus_reset(struct domain_device *dev)
933 {
934 	int rc = TMF_RESP_FUNC_FAILED;
935 	struct pm8001_device *pm8001_dev;
936 	struct pm8001_hba_info *pm8001_ha;
937 	struct sas_phy *phy;
938 	if (!dev || !dev->lldd_dev)
939 		return -1;
940 
941 	pm8001_dev = dev->lldd_dev;
942 	pm8001_ha = pm8001_find_ha_by_dev(dev);
943 	phy = sas_find_local_phy(dev);
944 
945 	if (dev_is_sata(dev)) {
946 		DECLARE_COMPLETION_ONSTACK(completion_setstate);
947 		if (scsi_is_sas_phy_local(phy))
948 			return 0;
949 		rc = sas_phy_reset(phy, 1);
950 		msleep(2000);
951 		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
952 			dev, 1, 0);
953 		pm8001_dev->setds_completion = &completion_setstate;
954 		rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
955 			pm8001_dev, 0x01);
956 		wait_for_completion(&completion_setstate);
957 	} else{
958 	rc = sas_phy_reset(phy, 1);
959 	msleep(2000);
960 	}
961 	PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
962 		pm8001_dev->device_id, rc));
963 	return rc;
964 }
965 
966 /* mandatory SAM-3, the task reset the specified LUN*/
967 int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
968 {
969 	int rc = TMF_RESP_FUNC_FAILED;
970 	struct pm8001_tmf_task tmf_task;
971 	struct pm8001_device *pm8001_dev = dev->lldd_dev;
972 	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
973 	if (dev_is_sata(dev)) {
974 		struct sas_phy *phy = sas_find_local_phy(dev);
975 		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
976 			dev, 1, 0);
977 		rc = sas_phy_reset(phy, 1);
978 		rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
979 			pm8001_dev, 0x01);
980 		msleep(2000);
981 	} else {
982 		tmf_task.tmf = TMF_LU_RESET;
983 		rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
984 	}
985 	/* If failed, fall-through I_T_Nexus reset */
986 	PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
987 		pm8001_dev->device_id, rc));
988 	return rc;
989 }
990 
991 /* optional SAM-3 */
992 int pm8001_query_task(struct sas_task *task)
993 {
994 	u32 tag = 0xdeadbeef;
995 	int i = 0;
996 	struct scsi_lun lun;
997 	struct pm8001_tmf_task tmf_task;
998 	int rc = TMF_RESP_FUNC_FAILED;
999 	if (unlikely(!task || !task->lldd_task || !task->dev))
1000 		return rc;
1001 
1002 	if (task->task_proto & SAS_PROTOCOL_SSP) {
1003 		struct scsi_cmnd *cmnd = task->uldd_task;
1004 		struct domain_device *dev = task->dev;
1005 		struct pm8001_hba_info *pm8001_ha =
1006 			pm8001_find_ha_by_dev(dev);
1007 
1008 		int_to_scsilun(cmnd->device->lun, &lun);
1009 		rc = pm8001_find_tag(task, &tag);
1010 		if (rc == 0) {
1011 			rc = TMF_RESP_FUNC_FAILED;
1012 			return rc;
1013 		}
1014 		PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
1015 		for (i = 0; i < 16; i++)
1016 			printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
1017 		printk(KERN_INFO "]\n");
1018 		tmf_task.tmf = 	TMF_QUERY_TASK;
1019 		tmf_task.tag_of_task_to_be_managed = tag;
1020 
1021 		rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1022 		switch (rc) {
1023 		/* The task is still in Lun, release it then */
1024 		case TMF_RESP_FUNC_SUCC:
1025 			PM8001_EH_DBG(pm8001_ha,
1026 				pm8001_printk("The task is still in Lun \n"));
1027 		/* The task is not in Lun or failed, reset the phy */
1028 		case TMF_RESP_FUNC_FAILED:
1029 		case TMF_RESP_FUNC_COMPLETE:
1030 			PM8001_EH_DBG(pm8001_ha,
1031 			pm8001_printk("The task is not in Lun or failed,"
1032 			" reset the phy \n"));
1033 			break;
1034 		}
1035 	}
1036 	pm8001_printk(":rc= %d\n", rc);
1037 	return rc;
1038 }
1039 
1040 /*  mandatory SAM-3, still need free task/ccb info, abord the specified task */
1041 int pm8001_abort_task(struct sas_task *task)
1042 {
1043 	unsigned long flags;
1044 	u32 tag = 0xdeadbeef;
1045 	u32 device_id;
1046 	struct domain_device *dev ;
1047 	struct pm8001_hba_info *pm8001_ha = NULL;
1048 	struct pm8001_ccb_info *ccb;
1049 	struct scsi_lun lun;
1050 	struct pm8001_device *pm8001_dev;
1051 	struct pm8001_tmf_task tmf_task;
1052 	int rc = TMF_RESP_FUNC_FAILED;
1053 	if (unlikely(!task || !task->lldd_task || !task->dev))
1054 		return rc;
1055 	spin_lock_irqsave(&task->task_state_lock, flags);
1056 	if (task->task_state_flags & SAS_TASK_STATE_DONE) {
1057 		spin_unlock_irqrestore(&task->task_state_lock, flags);
1058 		rc = TMF_RESP_FUNC_COMPLETE;
1059 		goto out;
1060 	}
1061 	spin_unlock_irqrestore(&task->task_state_lock, flags);
1062 	if (task->task_proto & SAS_PROTOCOL_SSP) {
1063 		struct scsi_cmnd *cmnd = task->uldd_task;
1064 		dev = task->dev;
1065 		ccb = task->lldd_task;
1066 		pm8001_dev = dev->lldd_dev;
1067 		pm8001_ha = pm8001_find_ha_by_dev(dev);
1068 		int_to_scsilun(cmnd->device->lun, &lun);
1069 		rc = pm8001_find_tag(task, &tag);
1070 		if (rc == 0) {
1071 			printk(KERN_INFO "No such tag in %s\n", __func__);
1072 			rc = TMF_RESP_FUNC_FAILED;
1073 			return rc;
1074 		}
1075 		device_id = pm8001_dev->device_id;
1076 		PM8001_EH_DBG(pm8001_ha,
1077 			pm8001_printk("abort io to deviceid= %d\n", device_id));
1078 		tmf_task.tmf = TMF_ABORT_TASK;
1079 		tmf_task.tag_of_task_to_be_managed = tag;
1080 		rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1081 		pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1082 			pm8001_dev->sas_device, 0, tag);
1083 	} else if (task->task_proto & SAS_PROTOCOL_SATA ||
1084 		task->task_proto & SAS_PROTOCOL_STP) {
1085 		dev = task->dev;
1086 		pm8001_dev = dev->lldd_dev;
1087 		pm8001_ha = pm8001_find_ha_by_dev(dev);
1088 		rc = pm8001_find_tag(task, &tag);
1089 		if (rc == 0) {
1090 			printk(KERN_INFO "No such tag in %s\n", __func__);
1091 			rc = TMF_RESP_FUNC_FAILED;
1092 			return rc;
1093 		}
1094 		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1095 			pm8001_dev->sas_device, 0, tag);
1096 	} else if (task->task_proto & SAS_PROTOCOL_SMP) {
1097 		/* SMP */
1098 		dev = task->dev;
1099 		pm8001_dev = dev->lldd_dev;
1100 		pm8001_ha = pm8001_find_ha_by_dev(dev);
1101 		rc = pm8001_find_tag(task, &tag);
1102 		if (rc == 0) {
1103 			printk(KERN_INFO "No such tag in %s\n", __func__);
1104 			rc = TMF_RESP_FUNC_FAILED;
1105 			return rc;
1106 		}
1107 		rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1108 			pm8001_dev->sas_device, 0, tag);
1109 
1110 	}
1111 out:
1112 	if (rc != TMF_RESP_FUNC_COMPLETE)
1113 		pm8001_printk("rc= %d\n", rc);
1114 	return rc;
1115 }
1116 
1117 int pm8001_abort_task_set(struct domain_device *dev, u8 *lun)
1118 {
1119 	int rc = TMF_RESP_FUNC_FAILED;
1120 	struct pm8001_tmf_task tmf_task;
1121 
1122 	tmf_task.tmf = TMF_ABORT_TASK_SET;
1123 	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1124 	return rc;
1125 }
1126 
1127 int pm8001_clear_aca(struct domain_device *dev, u8 *lun)
1128 {
1129 	int rc = TMF_RESP_FUNC_FAILED;
1130 	struct pm8001_tmf_task tmf_task;
1131 
1132 	tmf_task.tmf = TMF_CLEAR_ACA;
1133 	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1134 
1135 	return rc;
1136 }
1137 
1138 int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
1139 {
1140 	int rc = TMF_RESP_FUNC_FAILED;
1141 	struct pm8001_tmf_task tmf_task;
1142 	struct pm8001_device *pm8001_dev = dev->lldd_dev;
1143 	struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1144 
1145 	PM8001_EH_DBG(pm8001_ha,
1146 		pm8001_printk("I_T_L_Q clear task set[%x]\n",
1147 		pm8001_dev->device_id));
1148 	tmf_task.tmf = TMF_CLEAR_TASK_SET;
1149 	rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1150 	return rc;
1151 }
1152 
1153