1 /* 2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver 3 * 4 * Copyright (c) 2008-2009 USI Co., Ltd. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 14 * substantially similar to the "NO WARRANTY" disclaimer below 15 * ("Disclaimer") and any redistribution must be conditioned upon 16 * including a substantially similar Disclaimer requirement for further 17 * binary redistribution. 18 * 3. Neither the names of the above-listed copyright holders nor the names 19 * of any contributors may be used to endorse or promote products derived 20 * from this software without specific prior written permission. 21 * 22 * Alternatively, this software may be distributed under the terms of the 23 * GNU General Public License ("GPL") version 2 as published by the Free 24 * Software Foundation. 25 * 26 * NO WARRANTY 27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGES. 38 * 39 */ 40 41 #include <linux/slab.h> 42 #include "pm8001_sas.h" 43 #include "pm80xx_tracepoints.h" 44 45 /** 46 * pm8001_find_tag - from sas task to find out tag that belongs to this task 47 * @task: the task sent to the LLDD 48 * @tag: the found tag associated with the task 49 */ 50 static int pm8001_find_tag(struct sas_task *task, u32 *tag) 51 { 52 if (task->lldd_task) { 53 struct pm8001_ccb_info *ccb; 54 ccb = task->lldd_task; 55 *tag = ccb->ccb_tag; 56 return 1; 57 } 58 return 0; 59 } 60 61 /** 62 * pm8001_tag_free - free the no more needed tag 63 * @pm8001_ha: our hba struct 64 * @tag: the found tag associated with the task 65 */ 66 void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag) 67 { 68 void *bitmap = pm8001_ha->rsvd_tags; 69 unsigned long flags; 70 71 if (tag >= PM8001_RESERVE_SLOT) 72 return; 73 74 spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags); 75 __clear_bit(tag, bitmap); 76 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); 77 } 78 79 /** 80 * pm8001_tag_alloc - allocate a empty tag for task used. 81 * @pm8001_ha: our hba struct 82 * @tag_out: the found empty tag . 83 */ 84 int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out) 85 { 86 void *bitmap = pm8001_ha->rsvd_tags; 87 unsigned long flags; 88 unsigned int tag; 89 90 spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags); 91 tag = find_first_zero_bit(bitmap, PM8001_RESERVE_SLOT); 92 if (tag >= PM8001_RESERVE_SLOT) { 93 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); 94 return -SAS_QUEUE_FULL; 95 } 96 __set_bit(tag, bitmap); 97 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); 98 99 /* reserved tags are in the lower region of the tagset */ 100 *tag_out = tag; 101 return 0; 102 } 103 104 /** 105 * pm8001_mem_alloc - allocate memory for pm8001. 106 * @pdev: pci device. 107 * @virt_addr: the allocated virtual address 108 * @pphys_addr: DMA address for this device 109 * @pphys_addr_hi: the physical address high byte address. 110 * @pphys_addr_lo: the physical address low byte address. 111 * @mem_size: memory size. 112 * @align: requested byte alignment 113 */ 114 int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, 115 dma_addr_t *pphys_addr, u32 *pphys_addr_hi, 116 u32 *pphys_addr_lo, u32 mem_size, u32 align) 117 { 118 caddr_t mem_virt_alloc; 119 dma_addr_t mem_dma_handle; 120 u64 phys_align; 121 u64 align_offset = 0; 122 if (align) 123 align_offset = (dma_addr_t)align - 1; 124 mem_virt_alloc = dma_alloc_coherent(&pdev->dev, mem_size + align, 125 &mem_dma_handle, GFP_KERNEL); 126 if (!mem_virt_alloc) 127 return -ENOMEM; 128 *pphys_addr = mem_dma_handle; 129 phys_align = (*pphys_addr + align_offset) & ~align_offset; 130 *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr; 131 *pphys_addr_hi = upper_32_bits(phys_align); 132 *pphys_addr_lo = lower_32_bits(phys_align); 133 return 0; 134 } 135 136 /** 137 * pm8001_find_ha_by_dev - from domain device which come from sas layer to 138 * find out our hba struct. 139 * @dev: the domain device which from sas layer. 140 */ 141 static 142 struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev) 143 { 144 struct sas_ha_struct *sha = dev->port->ha; 145 struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; 146 return pm8001_ha; 147 } 148 149 /** 150 * pm8001_phy_control - this function should be registered to 151 * sas_domain_function_template to provide libsas used, note: this is just 152 * control the HBA phy rather than other expander phy if you want control 153 * other phy, you should use SMP command. 154 * @sas_phy: which phy in HBA phys. 155 * @func: the operation. 156 * @funcdata: always NULL. 157 */ 158 int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, 159 void *funcdata) 160 { 161 int rc = 0, phy_id = sas_phy->id; 162 struct pm8001_hba_info *pm8001_ha = NULL; 163 struct sas_phy_linkrates *rates; 164 struct pm8001_phy *phy; 165 DECLARE_COMPLETION_ONSTACK(completion); 166 unsigned long flags; 167 pm8001_ha = sas_phy->ha->lldd_ha; 168 phy = &pm8001_ha->phy[phy_id]; 169 170 if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) { 171 /* 172 * If the controller is in fatal error state, 173 * we will not get a response from the controller 174 */ 175 pm8001_dbg(pm8001_ha, FAIL, 176 "Phy control failed due to fatal errors\n"); 177 return -EFAULT; 178 } 179 180 switch (func) { 181 case PHY_FUNC_SET_LINK_RATE: 182 rates = funcdata; 183 if (rates->minimum_linkrate) { 184 pm8001_ha->phy[phy_id].minimum_linkrate = 185 rates->minimum_linkrate; 186 } 187 if (rates->maximum_linkrate) { 188 pm8001_ha->phy[phy_id].maximum_linkrate = 189 rates->maximum_linkrate; 190 } 191 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { 192 pm8001_ha->phy[phy_id].enable_completion = &completion; 193 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); 194 wait_for_completion(&completion); 195 } 196 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 197 PHY_LINK_RESET); 198 break; 199 case PHY_FUNC_HARD_RESET: 200 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { 201 pm8001_ha->phy[phy_id].enable_completion = &completion; 202 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); 203 wait_for_completion(&completion); 204 } 205 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 206 PHY_HARD_RESET); 207 break; 208 case PHY_FUNC_LINK_RESET: 209 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { 210 pm8001_ha->phy[phy_id].enable_completion = &completion; 211 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); 212 wait_for_completion(&completion); 213 } 214 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 215 PHY_LINK_RESET); 216 break; 217 case PHY_FUNC_RELEASE_SPINUP_HOLD: 218 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 219 PHY_LINK_RESET); 220 break; 221 case PHY_FUNC_DISABLE: 222 if (pm8001_ha->chip_id != chip_8001) { 223 if (pm8001_ha->phy[phy_id].phy_state == 224 PHY_STATE_LINK_UP_SPCV) { 225 sas_phy_disconnected(&phy->sas_phy); 226 sas_notify_phy_event(&phy->sas_phy, 227 PHYE_LOSS_OF_SIGNAL, GFP_KERNEL); 228 phy->phy_attached = 0; 229 } 230 } else { 231 if (pm8001_ha->phy[phy_id].phy_state == 232 PHY_STATE_LINK_UP_SPC) { 233 sas_phy_disconnected(&phy->sas_phy); 234 sas_notify_phy_event(&phy->sas_phy, 235 PHYE_LOSS_OF_SIGNAL, GFP_KERNEL); 236 phy->phy_attached = 0; 237 } 238 } 239 PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id); 240 break; 241 case PHY_FUNC_GET_EVENTS: 242 spin_lock_irqsave(&pm8001_ha->lock, flags); 243 if (pm8001_ha->chip_id == chip_8001) { 244 if (-1 == pm8001_bar4_shift(pm8001_ha, 245 (phy_id < 4) ? 0x30000 : 0x40000)) { 246 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 247 return -EINVAL; 248 } 249 } 250 { 251 struct sas_phy *phy = sas_phy->phy; 252 u32 __iomem *qp = pm8001_ha->io_mem[2].memvirtaddr 253 + 0x1034 + (0x4000 * (phy_id & 3)); 254 255 phy->invalid_dword_count = readl(qp); 256 phy->running_disparity_error_count = readl(&qp[1]); 257 phy->loss_of_dword_sync_count = readl(&qp[3]); 258 phy->phy_reset_problem_count = readl(&qp[4]); 259 } 260 if (pm8001_ha->chip_id == chip_8001) 261 pm8001_bar4_shift(pm8001_ha, 0); 262 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 263 return 0; 264 default: 265 pm8001_dbg(pm8001_ha, DEVIO, "func 0x%x\n", func); 266 rc = -EOPNOTSUPP; 267 } 268 msleep(300); 269 return rc; 270 } 271 272 /** 273 * pm8001_scan_start - we should enable all HBA phys by sending the phy_start 274 * command to HBA. 275 * @shost: the scsi host data. 276 */ 277 void pm8001_scan_start(struct Scsi_Host *shost) 278 { 279 int i; 280 struct pm8001_hba_info *pm8001_ha; 281 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); 282 DECLARE_COMPLETION_ONSTACK(completion); 283 pm8001_ha = sha->lldd_ha; 284 /* SAS_RE_INITIALIZATION not available in SPCv/ve */ 285 if (pm8001_ha->chip_id == chip_8001) 286 PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha); 287 for (i = 0; i < pm8001_ha->chip->n_phy; ++i) { 288 pm8001_ha->phy[i].enable_completion = &completion; 289 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i); 290 wait_for_completion(&completion); 291 msleep(300); 292 } 293 } 294 295 int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time) 296 { 297 struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); 298 299 /* give the phy enabling interrupt event time to come in (1s 300 * is empirically about all it takes) */ 301 if (time < HZ) 302 return 0; 303 /* Wait for discovery to finish */ 304 sas_drain_work(ha); 305 return 1; 306 } 307 308 /** 309 * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task 310 * @pm8001_ha: our hba card information 311 * @ccb: the ccb which attached to smp task 312 */ 313 static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha, 314 struct pm8001_ccb_info *ccb) 315 { 316 return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb); 317 } 318 319 u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag) 320 { 321 struct ata_queued_cmd *qc = task->uldd_task; 322 323 if (qc && ata_is_ncq(qc->tf.protocol)) { 324 *tag = qc->tag; 325 return 1; 326 } 327 328 return 0; 329 } 330 331 /** 332 * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task 333 * @pm8001_ha: our hba card information 334 * @ccb: the ccb which attached to sata task 335 */ 336 static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha, 337 struct pm8001_ccb_info *ccb) 338 { 339 return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb); 340 } 341 342 /** 343 * pm8001_task_prep_internal_abort - the dispatcher function, prepare data 344 * for internal abort task 345 * @pm8001_ha: our hba card information 346 * @ccb: the ccb which attached to sata task 347 */ 348 static int pm8001_task_prep_internal_abort(struct pm8001_hba_info *pm8001_ha, 349 struct pm8001_ccb_info *ccb) 350 { 351 return PM8001_CHIP_DISP->task_abort(pm8001_ha, ccb); 352 } 353 354 /** 355 * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data 356 * @pm8001_ha: our hba card information 357 * @ccb: the ccb which attached to TM 358 * @tmf: the task management IU 359 */ 360 static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha, 361 struct pm8001_ccb_info *ccb, struct sas_tmf_task *tmf) 362 { 363 return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf); 364 } 365 366 /** 367 * pm8001_task_prep_ssp - the dispatcher function, prepare ssp data for ssp task 368 * @pm8001_ha: our hba card information 369 * @ccb: the ccb which attached to ssp task 370 */ 371 static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha, 372 struct pm8001_ccb_info *ccb) 373 { 374 return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb); 375 } 376 377 /* Find the local port id that's attached to this device */ 378 static int sas_find_local_port_id(struct domain_device *dev) 379 { 380 struct domain_device *pdev = dev->parent; 381 382 /* Directly attached device */ 383 if (!pdev) 384 return dev->port->id; 385 while (pdev) { 386 struct domain_device *pdev_p = pdev->parent; 387 if (!pdev_p) 388 return pdev->port->id; 389 pdev = pdev->parent; 390 } 391 return 0; 392 } 393 394 #define DEV_IS_GONE(pm8001_dev) \ 395 ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))) 396 397 398 static int pm8001_deliver_command(struct pm8001_hba_info *pm8001_ha, 399 struct pm8001_ccb_info *ccb) 400 { 401 struct sas_task *task = ccb->task; 402 enum sas_protocol task_proto = task->task_proto; 403 struct sas_tmf_task *tmf = task->tmf; 404 int is_tmf = !!tmf; 405 406 switch (task_proto) { 407 case SAS_PROTOCOL_SMP: 408 return pm8001_task_prep_smp(pm8001_ha, ccb); 409 case SAS_PROTOCOL_SSP: 410 if (is_tmf) 411 return pm8001_task_prep_ssp_tm(pm8001_ha, ccb, tmf); 412 return pm8001_task_prep_ssp(pm8001_ha, ccb); 413 case SAS_PROTOCOL_SATA: 414 case SAS_PROTOCOL_STP: 415 return pm8001_task_prep_ata(pm8001_ha, ccb); 416 case SAS_PROTOCOL_INTERNAL_ABORT: 417 return pm8001_task_prep_internal_abort(pm8001_ha, ccb); 418 default: 419 dev_err(pm8001_ha->dev, "unknown sas_task proto: 0x%x\n", 420 task_proto); 421 } 422 423 return -EINVAL; 424 } 425 426 /** 427 * pm8001_queue_command - register for upper layer used, all IO commands sent 428 * to HBA are from this interface. 429 * @task: the task to be execute. 430 * @gfp_flags: gfp_flags 431 */ 432 int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags) 433 { 434 struct task_status_struct *ts = &task->task_status; 435 enum sas_protocol task_proto = task->task_proto; 436 struct domain_device *dev = task->dev; 437 struct pm8001_device *pm8001_dev = dev->lldd_dev; 438 bool internal_abort = sas_is_internal_abort(task); 439 struct pm8001_hba_info *pm8001_ha; 440 struct pm8001_port *port = NULL; 441 struct pm8001_ccb_info *ccb; 442 unsigned long flags; 443 u32 n_elem = 0; 444 int rc = 0; 445 446 if (!internal_abort && !dev->port) { 447 ts->resp = SAS_TASK_UNDELIVERED; 448 ts->stat = SAS_PHY_DOWN; 449 if (dev->dev_type != SAS_SATA_DEV) 450 task->task_done(task); 451 return 0; 452 } 453 454 pm8001_ha = pm8001_find_ha_by_dev(dev); 455 if (pm8001_ha->controller_fatal_error) { 456 ts->resp = SAS_TASK_UNDELIVERED; 457 task->task_done(task); 458 return 0; 459 } 460 461 pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec device\n"); 462 463 spin_lock_irqsave(&pm8001_ha->lock, flags); 464 465 pm8001_dev = dev->lldd_dev; 466 port = &pm8001_ha->port[sas_find_local_port_id(dev)]; 467 468 if (!internal_abort && 469 (DEV_IS_GONE(pm8001_dev) || !port->port_attached)) { 470 ts->resp = SAS_TASK_UNDELIVERED; 471 ts->stat = SAS_PHY_DOWN; 472 if (sas_protocol_ata(task_proto)) { 473 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 474 task->task_done(task); 475 spin_lock_irqsave(&pm8001_ha->lock, flags); 476 } else { 477 task->task_done(task); 478 } 479 rc = -ENODEV; 480 goto err_out; 481 } 482 483 ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_dev, task); 484 if (!ccb) { 485 rc = -SAS_QUEUE_FULL; 486 goto err_out; 487 } 488 489 if (!sas_protocol_ata(task_proto)) { 490 if (task->num_scatter) { 491 n_elem = dma_map_sg(pm8001_ha->dev, task->scatter, 492 task->num_scatter, task->data_dir); 493 if (!n_elem) { 494 rc = -ENOMEM; 495 goto err_out_ccb; 496 } 497 } 498 } else { 499 n_elem = task->num_scatter; 500 } 501 502 task->lldd_task = ccb; 503 ccb->n_elem = n_elem; 504 505 atomic_inc(&pm8001_dev->running_req); 506 507 rc = pm8001_deliver_command(pm8001_ha, ccb); 508 if (rc) { 509 atomic_dec(&pm8001_dev->running_req); 510 if (!sas_protocol_ata(task_proto) && n_elem) 511 dma_unmap_sg(pm8001_ha->dev, task->scatter, 512 task->num_scatter, task->data_dir); 513 err_out_ccb: 514 pm8001_ccb_free(pm8001_ha, ccb); 515 516 err_out: 517 pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec failed[%d]!\n", rc); 518 } 519 520 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 521 522 return rc; 523 } 524 525 /** 526 * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb. 527 * @pm8001_ha: our hba card information 528 * @ccb: the ccb which attached to ssp task to free 529 */ 530 void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha, 531 struct pm8001_ccb_info *ccb) 532 { 533 struct sas_task *task = ccb->task; 534 struct ata_queued_cmd *qc; 535 struct pm8001_device *pm8001_dev; 536 537 if (!task) 538 return; 539 540 if (!sas_protocol_ata(task->task_proto) && ccb->n_elem) 541 dma_unmap_sg(pm8001_ha->dev, task->scatter, 542 task->num_scatter, task->data_dir); 543 544 switch (task->task_proto) { 545 case SAS_PROTOCOL_SMP: 546 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1, 547 DMA_FROM_DEVICE); 548 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1, 549 DMA_TO_DEVICE); 550 break; 551 552 case SAS_PROTOCOL_SATA: 553 case SAS_PROTOCOL_STP: 554 case SAS_PROTOCOL_SSP: 555 default: 556 /* do nothing */ 557 break; 558 } 559 560 if (sas_protocol_ata(task->task_proto)) { 561 /* For SCSI/ATA commands uldd_task points to ata_queued_cmd */ 562 qc = task->uldd_task; 563 pm8001_dev = ccb->device; 564 trace_pm80xx_request_complete(pm8001_ha->id, 565 pm8001_dev ? pm8001_dev->attached_phy : PM8001_MAX_PHYS, 566 ccb->ccb_tag, 0 /* ctlr_opcode not known */, 567 qc ? qc->tf.command : 0, // ata opcode 568 pm8001_dev ? atomic_read(&pm8001_dev->running_req) : -1); 569 } 570 571 task->lldd_task = NULL; 572 pm8001_ccb_free(pm8001_ha, ccb); 573 } 574 575 /** 576 * pm8001_alloc_dev - find a empty pm8001_device 577 * @pm8001_ha: our hba card information 578 */ 579 static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha) 580 { 581 u32 dev; 582 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { 583 if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) { 584 pm8001_ha->devices[dev].id = dev; 585 return &pm8001_ha->devices[dev]; 586 } 587 } 588 if (dev == PM8001_MAX_DEVICES) { 589 pm8001_dbg(pm8001_ha, FAIL, 590 "max support %d devices, ignore ..\n", 591 PM8001_MAX_DEVICES); 592 } 593 return NULL; 594 } 595 /** 596 * pm8001_find_dev - find a matching pm8001_device 597 * @pm8001_ha: our hba card information 598 * @device_id: device ID to match against 599 */ 600 struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha, 601 u32 device_id) 602 { 603 u32 dev; 604 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { 605 if (pm8001_ha->devices[dev].device_id == device_id) 606 return &pm8001_ha->devices[dev]; 607 } 608 if (dev == PM8001_MAX_DEVICES) { 609 pm8001_dbg(pm8001_ha, FAIL, "NO MATCHING DEVICE FOUND !!!\n"); 610 } 611 return NULL; 612 } 613 614 void pm8001_free_dev(struct pm8001_device *pm8001_dev) 615 { 616 u32 id = pm8001_dev->id; 617 memset(pm8001_dev, 0, sizeof(*pm8001_dev)); 618 pm8001_dev->id = id; 619 pm8001_dev->dev_type = SAS_PHY_UNUSED; 620 pm8001_dev->device_id = PM8001_MAX_DEVICES; 621 pm8001_dev->sas_device = NULL; 622 } 623 624 /** 625 * pm8001_dev_found_notify - libsas notify a device is found. 626 * @dev: the device structure which sas layer used. 627 * 628 * when libsas find a sas domain device, it should tell the LLDD that 629 * device is found, and then LLDD register this device to HBA firmware 630 * by the command "OPC_INB_REG_DEV", after that the HBA will assign a 631 * device ID(according to device's sas address) and returned it to LLDD. From 632 * now on, we communicate with HBA FW with the device ID which HBA assigned 633 * rather than sas address. it is the necessary step for our HBA but it is 634 * the optional for other HBA driver. 635 */ 636 static int pm8001_dev_found_notify(struct domain_device *dev) 637 { 638 unsigned long flags = 0; 639 int res = 0; 640 struct pm8001_hba_info *pm8001_ha = NULL; 641 struct domain_device *parent_dev = dev->parent; 642 struct pm8001_device *pm8001_device; 643 DECLARE_COMPLETION_ONSTACK(completion); 644 u32 flag = 0; 645 pm8001_ha = pm8001_find_ha_by_dev(dev); 646 spin_lock_irqsave(&pm8001_ha->lock, flags); 647 648 pm8001_device = pm8001_alloc_dev(pm8001_ha); 649 if (!pm8001_device) { 650 res = -1; 651 goto found_out; 652 } 653 pm8001_device->sas_device = dev; 654 dev->lldd_dev = pm8001_device; 655 pm8001_device->dev_type = dev->dev_type; 656 pm8001_device->dcompletion = &completion; 657 if (parent_dev && dev_is_expander(parent_dev->dev_type)) { 658 int phy_id; 659 660 phy_id = sas_find_attached_phy_id(&parent_dev->ex_dev, dev); 661 if (phy_id < 0) { 662 pm8001_dbg(pm8001_ha, FAIL, 663 "Error: no attached dev:%016llx at ex:%016llx.\n", 664 SAS_ADDR(dev->sas_addr), 665 SAS_ADDR(parent_dev->sas_addr)); 666 res = phy_id; 667 } else { 668 pm8001_device->attached_phy = phy_id; 669 } 670 } else { 671 if (dev->dev_type == SAS_SATA_DEV) { 672 pm8001_device->attached_phy = 673 dev->rphy->identify.phy_identifier; 674 flag = 1; /* directly sata */ 675 } 676 } /*register this device to HBA*/ 677 pm8001_dbg(pm8001_ha, DISC, "Found device\n"); 678 PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag); 679 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 680 wait_for_completion(&completion); 681 if (dev->dev_type == SAS_END_DEVICE) 682 msleep(50); 683 pm8001_ha->flags = PM8001F_RUN_TIME; 684 return 0; 685 found_out: 686 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 687 return res; 688 } 689 690 int pm8001_dev_found(struct domain_device *dev) 691 { 692 return pm8001_dev_found_notify(dev); 693 } 694 695 #define PM8001_TASK_TIMEOUT 20 696 697 /** 698 * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify" 699 * @dev: the device structure which sas layer used. 700 */ 701 static void pm8001_dev_gone_notify(struct domain_device *dev) 702 { 703 unsigned long flags = 0; 704 struct pm8001_hba_info *pm8001_ha; 705 struct pm8001_device *pm8001_dev = dev->lldd_dev; 706 707 pm8001_ha = pm8001_find_ha_by_dev(dev); 708 spin_lock_irqsave(&pm8001_ha->lock, flags); 709 if (pm8001_dev) { 710 u32 device_id = pm8001_dev->device_id; 711 712 pm8001_dbg(pm8001_ha, DISC, "found dev[%d:%x] is gone.\n", 713 pm8001_dev->device_id, pm8001_dev->dev_type); 714 if (atomic_read(&pm8001_dev->running_req)) { 715 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 716 sas_execute_internal_abort_dev(dev, 0, NULL); 717 while (atomic_read(&pm8001_dev->running_req)) 718 msleep(20); 719 spin_lock_irqsave(&pm8001_ha->lock, flags); 720 } 721 PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id); 722 pm8001_free_dev(pm8001_dev); 723 } else { 724 pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n"); 725 } 726 dev->lldd_dev = NULL; 727 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 728 } 729 730 void pm8001_dev_gone(struct domain_device *dev) 731 { 732 pm8001_dev_gone_notify(dev); 733 } 734 735 /* retry commands by ha, by task and/or by device */ 736 void pm8001_open_reject_retry( 737 struct pm8001_hba_info *pm8001_ha, 738 struct sas_task *task_to_close, 739 struct pm8001_device *device_to_close) 740 { 741 int i; 742 unsigned long flags; 743 744 if (pm8001_ha == NULL) 745 return; 746 747 spin_lock_irqsave(&pm8001_ha->lock, flags); 748 749 for (i = 0; i < PM8001_MAX_CCB; i++) { 750 struct sas_task *task; 751 struct task_status_struct *ts; 752 struct pm8001_device *pm8001_dev; 753 unsigned long flags1; 754 struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i]; 755 756 if (ccb->ccb_tag == PM8001_INVALID_TAG) 757 continue; 758 759 pm8001_dev = ccb->device; 760 if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)) 761 continue; 762 if (!device_to_close) { 763 uintptr_t d = (uintptr_t)pm8001_dev 764 - (uintptr_t)&pm8001_ha->devices; 765 if (((d % sizeof(*pm8001_dev)) != 0) 766 || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES)) 767 continue; 768 } else if (pm8001_dev != device_to_close) 769 continue; 770 task = ccb->task; 771 if (!task || !task->task_done) 772 continue; 773 if (task_to_close && (task != task_to_close)) 774 continue; 775 ts = &task->task_status; 776 ts->resp = SAS_TASK_COMPLETE; 777 /* Force the midlayer to retry */ 778 ts->stat = SAS_OPEN_REJECT; 779 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; 780 if (pm8001_dev) 781 atomic_dec(&pm8001_dev->running_req); 782 spin_lock_irqsave(&task->task_state_lock, flags1); 783 task->task_state_flags &= ~SAS_TASK_STATE_PENDING; 784 task->task_state_flags |= SAS_TASK_STATE_DONE; 785 if (unlikely((task->task_state_flags 786 & SAS_TASK_STATE_ABORTED))) { 787 spin_unlock_irqrestore(&task->task_state_lock, 788 flags1); 789 pm8001_ccb_task_free(pm8001_ha, ccb); 790 } else { 791 spin_unlock_irqrestore(&task->task_state_lock, 792 flags1); 793 pm8001_ccb_task_free(pm8001_ha, ccb); 794 mb();/* in order to force CPU ordering */ 795 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 796 task->task_done(task); 797 spin_lock_irqsave(&pm8001_ha->lock, flags); 798 } 799 } 800 801 spin_unlock_irqrestore(&pm8001_ha->lock, flags); 802 } 803 804 /** 805 * pm8001_I_T_nexus_reset() - reset the initiator/target connection 806 * @dev: the device structure for the device to reset. 807 * 808 * Standard mandates link reset for ATA (type 0) and hard reset for 809 * SSP (type 1), only for RECOVERY 810 */ 811 int pm8001_I_T_nexus_reset(struct domain_device *dev) 812 { 813 int rc = TMF_RESP_FUNC_FAILED; 814 struct pm8001_device *pm8001_dev; 815 struct pm8001_hba_info *pm8001_ha; 816 struct sas_phy *phy; 817 818 if (!dev || !dev->lldd_dev) 819 return -ENODEV; 820 821 pm8001_dev = dev->lldd_dev; 822 pm8001_ha = pm8001_find_ha_by_dev(dev); 823 phy = sas_get_local_phy(dev); 824 825 if (dev_is_sata(dev)) { 826 if (scsi_is_sas_phy_local(phy)) { 827 rc = 0; 828 goto out; 829 } 830 rc = sas_phy_reset(phy, 1); 831 if (rc) { 832 pm8001_dbg(pm8001_ha, EH, 833 "phy reset failed for device %x\n" 834 "with rc %d\n", pm8001_dev->device_id, rc); 835 rc = TMF_RESP_FUNC_FAILED; 836 goto out; 837 } 838 msleep(2000); 839 rc = sas_execute_internal_abort_dev(dev, 0, NULL); 840 if (rc) { 841 pm8001_dbg(pm8001_ha, EH, "task abort failed %x\n" 842 "with rc %d\n", pm8001_dev->device_id, rc); 843 rc = TMF_RESP_FUNC_FAILED; 844 } 845 } else { 846 rc = sas_phy_reset(phy, 1); 847 msleep(2000); 848 } 849 pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n", 850 pm8001_dev->device_id, rc); 851 out: 852 sas_put_local_phy(phy); 853 return rc; 854 } 855 856 /* 857 * This function handle the IT_NEXUS_XXX event or completion 858 * status code for SSP/SATA/SMP I/O request. 859 */ 860 int pm8001_I_T_nexus_event_handler(struct domain_device *dev) 861 { 862 int rc = TMF_RESP_FUNC_FAILED; 863 struct pm8001_device *pm8001_dev; 864 struct pm8001_hba_info *pm8001_ha; 865 struct sas_phy *phy; 866 867 if (!dev || !dev->lldd_dev) 868 return -1; 869 870 pm8001_dev = dev->lldd_dev; 871 pm8001_ha = pm8001_find_ha_by_dev(dev); 872 873 pm8001_dbg(pm8001_ha, EH, "I_T_Nexus handler invoked !!\n"); 874 875 phy = sas_get_local_phy(dev); 876 877 if (dev_is_sata(dev)) { 878 DECLARE_COMPLETION_ONSTACK(completion_setstate); 879 if (scsi_is_sas_phy_local(phy)) { 880 rc = 0; 881 goto out; 882 } 883 /* send internal ssp/sata/smp abort command to FW */ 884 sas_execute_internal_abort_dev(dev, 0, NULL); 885 msleep(100); 886 887 /* deregister the target device */ 888 pm8001_dev_gone_notify(dev); 889 msleep(200); 890 891 /*send phy reset to hard reset target */ 892 rc = sas_phy_reset(phy, 1); 893 msleep(2000); 894 pm8001_dev->setds_completion = &completion_setstate; 895 896 wait_for_completion(&completion_setstate); 897 } else { 898 /* send internal ssp/sata/smp abort command to FW */ 899 sas_execute_internal_abort_dev(dev, 0, NULL); 900 msleep(100); 901 902 /* deregister the target device */ 903 pm8001_dev_gone_notify(dev); 904 msleep(200); 905 906 /*send phy reset to hard reset target */ 907 rc = sas_phy_reset(phy, 1); 908 msleep(2000); 909 } 910 pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n", 911 pm8001_dev->device_id, rc); 912 out: 913 sas_put_local_phy(phy); 914 915 return rc; 916 } 917 /* mandatory SAM-3, the task reset the specified LUN*/ 918 int pm8001_lu_reset(struct domain_device *dev, u8 *lun) 919 { 920 int rc = TMF_RESP_FUNC_FAILED; 921 struct pm8001_device *pm8001_dev = dev->lldd_dev; 922 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); 923 DECLARE_COMPLETION_ONSTACK(completion_setstate); 924 925 if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) { 926 /* 927 * If the controller is in fatal error state, 928 * we will not get a response from the controller 929 */ 930 pm8001_dbg(pm8001_ha, FAIL, 931 "LUN reset failed due to fatal errors\n"); 932 return rc; 933 } 934 935 if (dev_is_sata(dev)) { 936 struct sas_phy *phy = sas_get_local_phy(dev); 937 sas_execute_internal_abort_dev(dev, 0, NULL); 938 rc = sas_phy_reset(phy, 1); 939 sas_put_local_phy(phy); 940 pm8001_dev->setds_completion = &completion_setstate; 941 rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 942 pm8001_dev, DS_OPERATIONAL); 943 wait_for_completion(&completion_setstate); 944 } else { 945 rc = sas_lu_reset(dev, lun); 946 } 947 /* If failed, fall-through I_T_Nexus reset */ 948 pm8001_dbg(pm8001_ha, EH, "for device[%x]:rc=%d\n", 949 pm8001_dev->device_id, rc); 950 return rc; 951 } 952 953 /* optional SAM-3 */ 954 int pm8001_query_task(struct sas_task *task) 955 { 956 u32 tag = 0xdeadbeef; 957 int rc = TMF_RESP_FUNC_FAILED; 958 if (unlikely(!task || !task->lldd_task || !task->dev)) 959 return rc; 960 961 if (task->task_proto & SAS_PROTOCOL_SSP) { 962 struct scsi_cmnd *cmnd = task->uldd_task; 963 struct domain_device *dev = task->dev; 964 struct pm8001_hba_info *pm8001_ha = 965 pm8001_find_ha_by_dev(dev); 966 967 rc = pm8001_find_tag(task, &tag); 968 if (rc == 0) { 969 rc = TMF_RESP_FUNC_FAILED; 970 return rc; 971 } 972 pm8001_dbg(pm8001_ha, EH, "Query:[%16ph]\n", cmnd->cmnd); 973 974 rc = sas_query_task(task, tag); 975 switch (rc) { 976 /* The task is still in Lun, release it then */ 977 case TMF_RESP_FUNC_SUCC: 978 pm8001_dbg(pm8001_ha, EH, 979 "The task is still in Lun\n"); 980 break; 981 /* The task is not in Lun or failed, reset the phy */ 982 case TMF_RESP_FUNC_FAILED: 983 case TMF_RESP_FUNC_COMPLETE: 984 pm8001_dbg(pm8001_ha, EH, 985 "The task is not in Lun or failed, reset the phy\n"); 986 break; 987 } 988 } 989 pr_err("pm80xx: rc= %d\n", rc); 990 return rc; 991 } 992 993 /* mandatory SAM-3, still need free task/ccb info, abort the specified task */ 994 int pm8001_abort_task(struct sas_task *task) 995 { 996 struct pm8001_ccb_info *ccb = task->lldd_task; 997 unsigned long flags; 998 u32 tag; 999 struct domain_device *dev ; 1000 struct pm8001_hba_info *pm8001_ha; 1001 struct pm8001_device *pm8001_dev; 1002 int rc = TMF_RESP_FUNC_FAILED, ret; 1003 u32 phy_id, port_id; 1004 struct sas_task_slow slow_task; 1005 1006 if (!task->lldd_task || !task->dev) 1007 return TMF_RESP_FUNC_FAILED; 1008 1009 dev = task->dev; 1010 pm8001_dev = dev->lldd_dev; 1011 pm8001_ha = pm8001_find_ha_by_dev(dev); 1012 phy_id = pm8001_dev->attached_phy; 1013 1014 if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) { 1015 // If the controller is seeing fatal errors 1016 // abort task will not get a response from the controller 1017 return TMF_RESP_FUNC_FAILED; 1018 } 1019 1020 ret = pm8001_find_tag(task, &tag); 1021 if (ret == 0) { 1022 pm8001_info(pm8001_ha, "no tag for task:%p\n", task); 1023 return TMF_RESP_FUNC_FAILED; 1024 } 1025 spin_lock_irqsave(&task->task_state_lock, flags); 1026 if (task->task_state_flags & SAS_TASK_STATE_DONE) { 1027 spin_unlock_irqrestore(&task->task_state_lock, flags); 1028 return TMF_RESP_FUNC_COMPLETE; 1029 } 1030 task->task_state_flags |= SAS_TASK_STATE_ABORTED; 1031 if (task->slow_task == NULL) { 1032 init_completion(&slow_task.completion); 1033 task->slow_task = &slow_task; 1034 } 1035 spin_unlock_irqrestore(&task->task_state_lock, flags); 1036 if (task->task_proto & SAS_PROTOCOL_SSP) { 1037 rc = sas_abort_task(task, tag); 1038 sas_execute_internal_abort_single(dev, tag, 0, NULL); 1039 } else if (task->task_proto & SAS_PROTOCOL_SATA || 1040 task->task_proto & SAS_PROTOCOL_STP) { 1041 if (pm8001_ha->chip_id == chip_8006) { 1042 DECLARE_COMPLETION_ONSTACK(completion_reset); 1043 DECLARE_COMPLETION_ONSTACK(completion); 1044 struct pm8001_phy *phy = pm8001_ha->phy + phy_id; 1045 port_id = phy->port->port_id; 1046 1047 /* 1. Set Device state as Recovery */ 1048 pm8001_dev->setds_completion = &completion; 1049 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 1050 pm8001_dev, DS_IN_RECOVERY); 1051 wait_for_completion(&completion); 1052 1053 /* 2. Send Phy Control Hard Reset */ 1054 reinit_completion(&completion); 1055 phy->port_reset_status = PORT_RESET_TMO; 1056 phy->reset_success = false; 1057 phy->enable_completion = &completion; 1058 phy->reset_completion = &completion_reset; 1059 ret = PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, 1060 PHY_HARD_RESET); 1061 if (ret) { 1062 phy->enable_completion = NULL; 1063 phy->reset_completion = NULL; 1064 goto out; 1065 } 1066 1067 /* In the case of the reset timeout/fail we still 1068 * abort the command at the firmware. The assumption 1069 * here is that the drive is off doing something so 1070 * that it's not processing requests, and we want to 1071 * avoid getting a completion for this and either 1072 * leaking the task in libsas or losing the race and 1073 * getting a double free. 1074 */ 1075 pm8001_dbg(pm8001_ha, MSG, 1076 "Waiting for local phy ctl\n"); 1077 ret = wait_for_completion_timeout(&completion, 1078 PM8001_TASK_TIMEOUT * HZ); 1079 if (!ret || !phy->reset_success) { 1080 phy->enable_completion = NULL; 1081 phy->reset_completion = NULL; 1082 } else { 1083 /* 3. Wait for Port Reset complete or 1084 * Port reset TMO 1085 */ 1086 pm8001_dbg(pm8001_ha, MSG, 1087 "Waiting for Port reset\n"); 1088 ret = wait_for_completion_timeout( 1089 &completion_reset, 1090 PM8001_TASK_TIMEOUT * HZ); 1091 if (!ret) 1092 phy->reset_completion = NULL; 1093 WARN_ON(phy->port_reset_status == 1094 PORT_RESET_TMO); 1095 if (phy->port_reset_status == PORT_RESET_TMO) { 1096 pm8001_dev_gone_notify(dev); 1097 PM8001_CHIP_DISP->hw_event_ack_req( 1098 pm8001_ha, 0, 1099 0x07, /*HW_EVENT_PHY_DOWN ack*/ 1100 port_id, phy_id, 0, 0); 1101 goto out; 1102 } 1103 } 1104 1105 /* 1106 * 4. SATA Abort ALL 1107 * we wait for the task to be aborted so that the task 1108 * is removed from the ccb. on success the caller is 1109 * going to free the task. 1110 */ 1111 ret = sas_execute_internal_abort_dev(dev, 0, NULL); 1112 if (ret) 1113 goto out; 1114 ret = wait_for_completion_timeout( 1115 &task->slow_task->completion, 1116 PM8001_TASK_TIMEOUT * HZ); 1117 if (!ret) 1118 goto out; 1119 1120 /* 5. Set Device State as Operational */ 1121 reinit_completion(&completion); 1122 pm8001_dev->setds_completion = &completion; 1123 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 1124 pm8001_dev, DS_OPERATIONAL); 1125 wait_for_completion(&completion); 1126 } else { 1127 /* 1128 * Ensure that if we see a completion for the ccb 1129 * associated with the task which we are trying to 1130 * abort then we should not touch the sas_task as it 1131 * may race with libsas freeing it when return here. 1132 */ 1133 ccb->task = NULL; 1134 ret = sas_execute_internal_abort_single(dev, tag, 0, NULL); 1135 } 1136 rc = TMF_RESP_FUNC_COMPLETE; 1137 } else if (task->task_proto & SAS_PROTOCOL_SMP) { 1138 /* SMP */ 1139 rc = sas_execute_internal_abort_single(dev, tag, 0, NULL); 1140 1141 } 1142 out: 1143 spin_lock_irqsave(&task->task_state_lock, flags); 1144 if (task->slow_task == &slow_task) 1145 task->slow_task = NULL; 1146 spin_unlock_irqrestore(&task->task_state_lock, flags); 1147 if (rc != TMF_RESP_FUNC_COMPLETE) 1148 pm8001_info(pm8001_ha, "rc= %d\n", rc); 1149 return rc; 1150 } 1151 1152 int pm8001_clear_task_set(struct domain_device *dev, u8 *lun) 1153 { 1154 struct pm8001_device *pm8001_dev = dev->lldd_dev; 1155 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); 1156 1157 pm8001_dbg(pm8001_ha, EH, "I_T_L_Q clear task set[%x]\n", 1158 pm8001_dev->device_id); 1159 return sas_clear_task_set(dev, lun); 1160 } 1161 1162 void pm8001_port_formed(struct asd_sas_phy *sas_phy) 1163 { 1164 struct sas_ha_struct *sas_ha = sas_phy->ha; 1165 struct pm8001_hba_info *pm8001_ha = sas_ha->lldd_ha; 1166 struct pm8001_phy *phy = sas_phy->lldd_phy; 1167 struct asd_sas_port *sas_port = sas_phy->port; 1168 struct pm8001_port *port = phy->port; 1169 1170 if (!sas_port) { 1171 pm8001_dbg(pm8001_ha, FAIL, "Received null port\n"); 1172 return; 1173 } 1174 sas_port->lldd_port = port; 1175 } 1176 1177 void pm8001_setds_completion(struct domain_device *dev) 1178 { 1179 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); 1180 struct pm8001_device *pm8001_dev = dev->lldd_dev; 1181 DECLARE_COMPLETION_ONSTACK(completion_setstate); 1182 1183 if (pm8001_ha->chip_id != chip_8001) { 1184 pm8001_dev->setds_completion = &completion_setstate; 1185 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, 1186 pm8001_dev, DS_OPERATIONAL); 1187 wait_for_completion(&completion_setstate); 1188 } 1189 } 1190 1191 void pm8001_tmf_aborted(struct sas_task *task) 1192 { 1193 struct pm8001_ccb_info *ccb = task->lldd_task; 1194 1195 if (ccb) 1196 ccb->task = NULL; 1197 } 1198