1 /* 2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver 3 * 4 * Copyright (c) 2008-2009 USI Co., Ltd. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 14 * substantially similar to the "NO WARRANTY" disclaimer below 15 * ("Disclaimer") and any redistribution must be conditioned upon 16 * including a substantially similar Disclaimer requirement for further 17 * binary redistribution. 18 * 3. Neither the names of the above-listed copyright holders nor the names 19 * of any contributors may be used to endorse or promote products derived 20 * from this software without specific prior written permission. 21 * 22 * Alternatively, this software may be distributed under the terms of the 23 * GNU General Public License ("GPL") version 2 as published by the Free 24 * Software Foundation. 25 * 26 * NO WARRANTY 27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGES. 38 * 39 */ 40 41 #include <linux/slab.h> 42 #include "pm8001_sas.h" 43 #include "pm8001_chips.h" 44 45 static struct scsi_transport_template *pm8001_stt; 46 47 /** 48 * chip info structure to identify chip key functionality as 49 * encryption available/not, no of ports, hw specific function ref 50 */ 51 static const struct pm8001_chip_info pm8001_chips[] = { 52 [chip_8001] = {0, 8, &pm8001_8001_dispatch,}, 53 [chip_8008] = {0, 8, &pm8001_80xx_dispatch,}, 54 [chip_8009] = {1, 8, &pm8001_80xx_dispatch,}, 55 [chip_8018] = {0, 16, &pm8001_80xx_dispatch,}, 56 [chip_8019] = {1, 16, &pm8001_80xx_dispatch,}, 57 [chip_8074] = {0, 8, &pm8001_80xx_dispatch,}, 58 [chip_8076] = {0, 16, &pm8001_80xx_dispatch,}, 59 [chip_8077] = {0, 16, &pm8001_80xx_dispatch,}, 60 [chip_8006] = {0, 16, &pm8001_80xx_dispatch,}, 61 [chip_8070] = {0, 8, &pm8001_80xx_dispatch,}, 62 [chip_8072] = {0, 16, &pm8001_80xx_dispatch,}, 63 }; 64 static int pm8001_id; 65 66 LIST_HEAD(hba_list); 67 68 struct workqueue_struct *pm8001_wq; 69 70 /** 71 * The main structure which LLDD must register for scsi core. 72 */ 73 static struct scsi_host_template pm8001_sht = { 74 .module = THIS_MODULE, 75 .name = DRV_NAME, 76 .queuecommand = sas_queuecommand, 77 .target_alloc = sas_target_alloc, 78 .slave_configure = sas_slave_configure, 79 .scan_finished = pm8001_scan_finished, 80 .scan_start = pm8001_scan_start, 81 .change_queue_depth = sas_change_queue_depth, 82 .bios_param = sas_bios_param, 83 .can_queue = 1, 84 .this_id = -1, 85 .sg_tablesize = SG_ALL, 86 .max_sectors = SCSI_DEFAULT_MAX_SECTORS, 87 .use_clustering = ENABLE_CLUSTERING, 88 .eh_device_reset_handler = sas_eh_device_reset_handler, 89 .eh_bus_reset_handler = sas_eh_bus_reset_handler, 90 .target_destroy = sas_target_destroy, 91 .ioctl = sas_ioctl, 92 .shost_attrs = pm8001_host_attrs, 93 .track_queue_depth = 1, 94 }; 95 96 /** 97 * Sas layer call this function to execute specific task. 98 */ 99 static struct sas_domain_function_template pm8001_transport_ops = { 100 .lldd_dev_found = pm8001_dev_found, 101 .lldd_dev_gone = pm8001_dev_gone, 102 103 .lldd_execute_task = pm8001_queue_command, 104 .lldd_control_phy = pm8001_phy_control, 105 106 .lldd_abort_task = pm8001_abort_task, 107 .lldd_abort_task_set = pm8001_abort_task_set, 108 .lldd_clear_aca = pm8001_clear_aca, 109 .lldd_clear_task_set = pm8001_clear_task_set, 110 .lldd_I_T_nexus_reset = pm8001_I_T_nexus_reset, 111 .lldd_lu_reset = pm8001_lu_reset, 112 .lldd_query_task = pm8001_query_task, 113 }; 114 115 /** 116 *pm8001_phy_init - initiate our adapter phys 117 *@pm8001_ha: our hba structure. 118 *@phy_id: phy id. 119 */ 120 static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id) 121 { 122 struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; 123 struct asd_sas_phy *sas_phy = &phy->sas_phy; 124 phy->phy_state = 0; 125 phy->pm8001_ha = pm8001_ha; 126 sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0; 127 sas_phy->class = SAS; 128 sas_phy->iproto = SAS_PROTOCOL_ALL; 129 sas_phy->tproto = 0; 130 sas_phy->type = PHY_TYPE_PHYSICAL; 131 sas_phy->role = PHY_ROLE_INITIATOR; 132 sas_phy->oob_mode = OOB_NOT_CONNECTED; 133 sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN; 134 sas_phy->id = phy_id; 135 sas_phy->sas_addr = &pm8001_ha->sas_addr[0]; 136 sas_phy->frame_rcvd = &phy->frame_rcvd[0]; 137 sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata; 138 sas_phy->lldd_phy = phy; 139 } 140 141 /** 142 *pm8001_free - free hba 143 *@pm8001_ha: our hba structure. 144 * 145 */ 146 static void pm8001_free(struct pm8001_hba_info *pm8001_ha) 147 { 148 int i; 149 150 if (!pm8001_ha) 151 return; 152 153 for (i = 0; i < USI_MAX_MEMCNT; i++) { 154 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) { 155 pci_free_consistent(pm8001_ha->pdev, 156 (pm8001_ha->memoryMap.region[i].total_len + 157 pm8001_ha->memoryMap.region[i].alignment), 158 pm8001_ha->memoryMap.region[i].virt_ptr, 159 pm8001_ha->memoryMap.region[i].phys_addr); 160 } 161 } 162 PM8001_CHIP_DISP->chip_iounmap(pm8001_ha); 163 if (pm8001_ha->shost) 164 scsi_host_put(pm8001_ha->shost); 165 flush_workqueue(pm8001_wq); 166 kfree(pm8001_ha->tags); 167 kfree(pm8001_ha); 168 } 169 170 #ifdef PM8001_USE_TASKLET 171 172 /** 173 * tasklet for 64 msi-x interrupt handler 174 * @opaque: the passed general host adapter struct 175 * Note: pm8001_tasklet is common for pm8001 & pm80xx 176 */ 177 static void pm8001_tasklet(unsigned long opaque) 178 { 179 struct pm8001_hba_info *pm8001_ha; 180 struct isr_param *irq_vector; 181 182 irq_vector = (struct isr_param *)opaque; 183 pm8001_ha = irq_vector->drv_inst; 184 if (unlikely(!pm8001_ha)) 185 BUG_ON(1); 186 PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id); 187 } 188 #endif 189 190 /** 191 * pm8001_interrupt_handler_msix - main MSIX interrupt handler. 192 * It obtains the vector number and calls the equivalent bottom 193 * half or services directly. 194 * @opaque: the passed outbound queue/vector. Host structure is 195 * retrieved from the same. 196 */ 197 static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque) 198 { 199 struct isr_param *irq_vector; 200 struct pm8001_hba_info *pm8001_ha; 201 irqreturn_t ret = IRQ_HANDLED; 202 irq_vector = (struct isr_param *)opaque; 203 pm8001_ha = irq_vector->drv_inst; 204 205 if (unlikely(!pm8001_ha)) 206 return IRQ_NONE; 207 if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha)) 208 return IRQ_NONE; 209 #ifdef PM8001_USE_TASKLET 210 tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]); 211 #else 212 ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id); 213 #endif 214 return ret; 215 } 216 217 /** 218 * pm8001_interrupt_handler_intx - main INTx interrupt handler. 219 * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure. 220 */ 221 222 static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id) 223 { 224 struct pm8001_hba_info *pm8001_ha; 225 irqreturn_t ret = IRQ_HANDLED; 226 struct sas_ha_struct *sha = dev_id; 227 pm8001_ha = sha->lldd_ha; 228 if (unlikely(!pm8001_ha)) 229 return IRQ_NONE; 230 if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha)) 231 return IRQ_NONE; 232 233 #ifdef PM8001_USE_TASKLET 234 tasklet_schedule(&pm8001_ha->tasklet[0]); 235 #else 236 ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0); 237 #endif 238 return ret; 239 } 240 241 /** 242 * pm8001_alloc - initiate our hba structure and 6 DMAs area. 243 * @pm8001_ha:our hba structure. 244 * 245 */ 246 static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha, 247 const struct pci_device_id *ent) 248 { 249 int i; 250 spin_lock_init(&pm8001_ha->lock); 251 spin_lock_init(&pm8001_ha->bitmap_lock); 252 PM8001_INIT_DBG(pm8001_ha, 253 pm8001_printk("pm8001_alloc: PHY:%x\n", 254 pm8001_ha->chip->n_phy)); 255 for (i = 0; i < pm8001_ha->chip->n_phy; i++) { 256 pm8001_phy_init(pm8001_ha, i); 257 pm8001_ha->port[i].wide_port_phymap = 0; 258 pm8001_ha->port[i].port_attached = 0; 259 pm8001_ha->port[i].port_state = 0; 260 INIT_LIST_HEAD(&pm8001_ha->port[i].list); 261 } 262 263 pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL); 264 if (!pm8001_ha->tags) 265 goto err_out; 266 /* MPI Memory region 1 for AAP Event Log for fw */ 267 pm8001_ha->memoryMap.region[AAP1].num_elements = 1; 268 pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE; 269 pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE; 270 pm8001_ha->memoryMap.region[AAP1].alignment = 32; 271 272 /* MPI Memory region 2 for IOP Event Log for fw */ 273 pm8001_ha->memoryMap.region[IOP].num_elements = 1; 274 pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE; 275 pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE; 276 pm8001_ha->memoryMap.region[IOP].alignment = 32; 277 278 for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) { 279 /* MPI Memory region 3 for consumer Index of inbound queues */ 280 pm8001_ha->memoryMap.region[CI+i].num_elements = 1; 281 pm8001_ha->memoryMap.region[CI+i].element_size = 4; 282 pm8001_ha->memoryMap.region[CI+i].total_len = 4; 283 pm8001_ha->memoryMap.region[CI+i].alignment = 4; 284 285 if ((ent->driver_data) != chip_8001) { 286 /* MPI Memory region 5 inbound queues */ 287 pm8001_ha->memoryMap.region[IB+i].num_elements = 288 PM8001_MPI_QUEUE; 289 pm8001_ha->memoryMap.region[IB+i].element_size = 128; 290 pm8001_ha->memoryMap.region[IB+i].total_len = 291 PM8001_MPI_QUEUE * 128; 292 pm8001_ha->memoryMap.region[IB+i].alignment = 128; 293 } else { 294 pm8001_ha->memoryMap.region[IB+i].num_elements = 295 PM8001_MPI_QUEUE; 296 pm8001_ha->memoryMap.region[IB+i].element_size = 64; 297 pm8001_ha->memoryMap.region[IB+i].total_len = 298 PM8001_MPI_QUEUE * 64; 299 pm8001_ha->memoryMap.region[IB+i].alignment = 64; 300 } 301 } 302 303 for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) { 304 /* MPI Memory region 4 for producer Index of outbound queues */ 305 pm8001_ha->memoryMap.region[PI+i].num_elements = 1; 306 pm8001_ha->memoryMap.region[PI+i].element_size = 4; 307 pm8001_ha->memoryMap.region[PI+i].total_len = 4; 308 pm8001_ha->memoryMap.region[PI+i].alignment = 4; 309 310 if (ent->driver_data != chip_8001) { 311 /* MPI Memory region 6 Outbound queues */ 312 pm8001_ha->memoryMap.region[OB+i].num_elements = 313 PM8001_MPI_QUEUE; 314 pm8001_ha->memoryMap.region[OB+i].element_size = 128; 315 pm8001_ha->memoryMap.region[OB+i].total_len = 316 PM8001_MPI_QUEUE * 128; 317 pm8001_ha->memoryMap.region[OB+i].alignment = 128; 318 } else { 319 /* MPI Memory region 6 Outbound queues */ 320 pm8001_ha->memoryMap.region[OB+i].num_elements = 321 PM8001_MPI_QUEUE; 322 pm8001_ha->memoryMap.region[OB+i].element_size = 64; 323 pm8001_ha->memoryMap.region[OB+i].total_len = 324 PM8001_MPI_QUEUE * 64; 325 pm8001_ha->memoryMap.region[OB+i].alignment = 64; 326 } 327 328 } 329 /* Memory region write DMA*/ 330 pm8001_ha->memoryMap.region[NVMD].num_elements = 1; 331 pm8001_ha->memoryMap.region[NVMD].element_size = 4096; 332 pm8001_ha->memoryMap.region[NVMD].total_len = 4096; 333 /* Memory region for devices*/ 334 pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1; 335 pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES * 336 sizeof(struct pm8001_device); 337 pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES * 338 sizeof(struct pm8001_device); 339 340 /* Memory region for ccb_info*/ 341 pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1; 342 pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB * 343 sizeof(struct pm8001_ccb_info); 344 pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB * 345 sizeof(struct pm8001_ccb_info); 346 347 /* Memory region for fw flash */ 348 pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096; 349 350 pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1; 351 pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000; 352 pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000; 353 pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000; 354 for (i = 0; i < USI_MAX_MEMCNT; i++) { 355 if (pm8001_mem_alloc(pm8001_ha->pdev, 356 &pm8001_ha->memoryMap.region[i].virt_ptr, 357 &pm8001_ha->memoryMap.region[i].phys_addr, 358 &pm8001_ha->memoryMap.region[i].phys_addr_hi, 359 &pm8001_ha->memoryMap.region[i].phys_addr_lo, 360 pm8001_ha->memoryMap.region[i].total_len, 361 pm8001_ha->memoryMap.region[i].alignment) != 0) { 362 PM8001_FAIL_DBG(pm8001_ha, 363 pm8001_printk("Mem%d alloc failed\n", 364 i)); 365 goto err_out; 366 } 367 } 368 369 pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr; 370 for (i = 0; i < PM8001_MAX_DEVICES; i++) { 371 pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED; 372 pm8001_ha->devices[i].id = i; 373 pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES; 374 pm8001_ha->devices[i].running_req = 0; 375 } 376 pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr; 377 for (i = 0; i < PM8001_MAX_CCB; i++) { 378 pm8001_ha->ccb_info[i].ccb_dma_handle = 379 pm8001_ha->memoryMap.region[CCB_MEM].phys_addr + 380 i * sizeof(struct pm8001_ccb_info); 381 pm8001_ha->ccb_info[i].task = NULL; 382 pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff; 383 pm8001_ha->ccb_info[i].device = NULL; 384 ++pm8001_ha->tags_num; 385 } 386 pm8001_ha->flags = PM8001F_INIT_TIME; 387 /* Initialize tags */ 388 pm8001_tag_init(pm8001_ha); 389 return 0; 390 err_out: 391 return 1; 392 } 393 394 /** 395 * pm8001_ioremap - remap the pci high physical address to kernal virtual 396 * address so that we can access them. 397 * @pm8001_ha:our hba structure. 398 */ 399 static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha) 400 { 401 u32 bar; 402 u32 logicalBar = 0; 403 struct pci_dev *pdev; 404 405 pdev = pm8001_ha->pdev; 406 /* map pci mem (PMC pci base 0-3)*/ 407 for (bar = 0; bar < 6; bar++) { 408 /* 409 ** logical BARs for SPC: 410 ** bar 0 and 1 - logical BAR0 411 ** bar 2 and 3 - logical BAR1 412 ** bar4 - logical BAR2 413 ** bar5 - logical BAR3 414 ** Skip the appropriate assignments: 415 */ 416 if ((bar == 1) || (bar == 3)) 417 continue; 418 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) { 419 pm8001_ha->io_mem[logicalBar].membase = 420 pci_resource_start(pdev, bar); 421 pm8001_ha->io_mem[logicalBar].memsize = 422 pci_resource_len(pdev, bar); 423 pm8001_ha->io_mem[logicalBar].memvirtaddr = 424 ioremap(pm8001_ha->io_mem[logicalBar].membase, 425 pm8001_ha->io_mem[logicalBar].memsize); 426 PM8001_INIT_DBG(pm8001_ha, 427 pm8001_printk("PCI: bar %d, logicalBar %d ", 428 bar, logicalBar)); 429 PM8001_INIT_DBG(pm8001_ha, pm8001_printk( 430 "base addr %llx virt_addr=%llx len=%d\n", 431 (u64)pm8001_ha->io_mem[logicalBar].membase, 432 (u64)(unsigned long) 433 pm8001_ha->io_mem[logicalBar].memvirtaddr, 434 pm8001_ha->io_mem[logicalBar].memsize)); 435 } else { 436 pm8001_ha->io_mem[logicalBar].membase = 0; 437 pm8001_ha->io_mem[logicalBar].memsize = 0; 438 pm8001_ha->io_mem[logicalBar].memvirtaddr = 0; 439 } 440 logicalBar++; 441 } 442 return 0; 443 } 444 445 /** 446 * pm8001_pci_alloc - initialize our ha card structure 447 * @pdev: pci device. 448 * @ent: ent 449 * @shost: scsi host struct which has been initialized before. 450 */ 451 static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev, 452 const struct pci_device_id *ent, 453 struct Scsi_Host *shost) 454 455 { 456 struct pm8001_hba_info *pm8001_ha; 457 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); 458 int j; 459 460 pm8001_ha = sha->lldd_ha; 461 if (!pm8001_ha) 462 return NULL; 463 464 pm8001_ha->pdev = pdev; 465 pm8001_ha->dev = &pdev->dev; 466 pm8001_ha->chip_id = ent->driver_data; 467 pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id]; 468 pm8001_ha->irq = pdev->irq; 469 pm8001_ha->sas = sha; 470 pm8001_ha->shost = shost; 471 pm8001_ha->id = pm8001_id++; 472 pm8001_ha->logging_level = 0x01; 473 sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id); 474 /* IOMB size is 128 for 8088/89 controllers */ 475 if (pm8001_ha->chip_id != chip_8001) 476 pm8001_ha->iomb_size = IOMB_SIZE_SPCV; 477 else 478 pm8001_ha->iomb_size = IOMB_SIZE_SPC; 479 480 #ifdef PM8001_USE_TASKLET 481 /* Tasklet for non msi-x interrupt handler */ 482 if ((!pdev->msix_cap || !pci_msi_enabled()) 483 || (pm8001_ha->chip_id == chip_8001)) 484 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet, 485 (unsigned long)&(pm8001_ha->irq_vector[0])); 486 else 487 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) 488 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet, 489 (unsigned long)&(pm8001_ha->irq_vector[j])); 490 #endif 491 pm8001_ioremap(pm8001_ha); 492 if (!pm8001_alloc(pm8001_ha, ent)) 493 return pm8001_ha; 494 pm8001_free(pm8001_ha); 495 return NULL; 496 } 497 498 /** 499 * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit 500 * @pdev: pci device. 501 */ 502 static int pci_go_44(struct pci_dev *pdev) 503 { 504 int rc; 505 506 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) { 507 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44)); 508 if (rc) { 509 rc = pci_set_consistent_dma_mask(pdev, 510 DMA_BIT_MASK(32)); 511 if (rc) { 512 dev_printk(KERN_ERR, &pdev->dev, 513 "44-bit DMA enable failed\n"); 514 return rc; 515 } 516 } 517 } else { 518 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); 519 if (rc) { 520 dev_printk(KERN_ERR, &pdev->dev, 521 "32-bit DMA enable failed\n"); 522 return rc; 523 } 524 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); 525 if (rc) { 526 dev_printk(KERN_ERR, &pdev->dev, 527 "32-bit consistent DMA enable failed\n"); 528 return rc; 529 } 530 } 531 return rc; 532 } 533 534 /** 535 * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them. 536 * @shost: scsi host which has been allocated outside. 537 * @chip_info: our ha struct. 538 */ 539 static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost, 540 const struct pm8001_chip_info *chip_info) 541 { 542 int phy_nr, port_nr; 543 struct asd_sas_phy **arr_phy; 544 struct asd_sas_port **arr_port; 545 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); 546 547 phy_nr = chip_info->n_phy; 548 port_nr = phy_nr; 549 memset(sha, 0x00, sizeof(*sha)); 550 arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL); 551 if (!arr_phy) 552 goto exit; 553 arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL); 554 if (!arr_port) 555 goto exit_free2; 556 557 sha->sas_phy = arr_phy; 558 sha->sas_port = arr_port; 559 sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL); 560 if (!sha->lldd_ha) 561 goto exit_free1; 562 563 shost->transportt = pm8001_stt; 564 shost->max_id = PM8001_MAX_DEVICES; 565 shost->max_lun = 8; 566 shost->max_channel = 0; 567 shost->unique_id = pm8001_id; 568 shost->max_cmd_len = 16; 569 shost->can_queue = PM8001_CAN_QUEUE; 570 shost->cmd_per_lun = 32; 571 return 0; 572 exit_free1: 573 kfree(arr_port); 574 exit_free2: 575 kfree(arr_phy); 576 exit: 577 return -1; 578 } 579 580 /** 581 * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas 582 * @shost: scsi host which has been allocated outside 583 * @chip_info: our ha struct. 584 */ 585 static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, 586 const struct pm8001_chip_info *chip_info) 587 { 588 int i = 0; 589 struct pm8001_hba_info *pm8001_ha; 590 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); 591 592 pm8001_ha = sha->lldd_ha; 593 for (i = 0; i < chip_info->n_phy; i++) { 594 sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy; 595 sha->sas_port[i] = &pm8001_ha->port[i].sas_port; 596 } 597 sha->sas_ha_name = DRV_NAME; 598 sha->dev = pm8001_ha->dev; 599 600 sha->lldd_module = THIS_MODULE; 601 sha->sas_addr = &pm8001_ha->sas_addr[0]; 602 sha->num_phys = chip_info->n_phy; 603 sha->core.shost = shost; 604 } 605 606 /** 607 * pm8001_init_sas_add - initialize sas address 608 * @chip_info: our ha struct. 609 * 610 * Currently we just set the fixed SAS address to our HBA,for manufacture, 611 * it should read from the EEPROM 612 */ 613 static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) 614 { 615 u8 i, j; 616 #ifdef PM8001_READ_VPD 617 /* For new SPC controllers WWN is stored in flash vpd 618 * For SPC/SPCve controllers WWN is stored in EEPROM 619 * For Older SPC WWN is stored in NVMD 620 */ 621 DECLARE_COMPLETION_ONSTACK(completion); 622 struct pm8001_ioctl_payload payload; 623 u16 deviceid; 624 int rc; 625 626 pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid); 627 pm8001_ha->nvmd_completion = &completion; 628 629 if (pm8001_ha->chip_id == chip_8001) { 630 if (deviceid == 0x8081 || deviceid == 0x0042) { 631 payload.minor_function = 4; 632 payload.length = 4096; 633 } else { 634 payload.minor_function = 0; 635 payload.length = 128; 636 } 637 } else if ((pm8001_ha->chip_id == chip_8070 || 638 pm8001_ha->chip_id == chip_8072) && 639 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) { 640 payload.minor_function = 4; 641 payload.length = 4096; 642 } else { 643 payload.minor_function = 1; 644 payload.length = 4096; 645 } 646 payload.offset = 0; 647 payload.func_specific = kzalloc(payload.length, GFP_KERNEL); 648 if (!payload.func_specific) { 649 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("mem alloc fail\n")); 650 return; 651 } 652 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload); 653 if (rc) { 654 kfree(payload.func_specific); 655 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n")); 656 return; 657 } 658 wait_for_completion(&completion); 659 660 for (i = 0, j = 0; i <= 7; i++, j++) { 661 if (pm8001_ha->chip_id == chip_8001) { 662 if (deviceid == 0x8081) 663 pm8001_ha->sas_addr[j] = 664 payload.func_specific[0x704 + i]; 665 else if (deviceid == 0x0042) 666 pm8001_ha->sas_addr[j] = 667 payload.func_specific[0x010 + i]; 668 } else if ((pm8001_ha->chip_id == chip_8070 || 669 pm8001_ha->chip_id == chip_8072) && 670 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) { 671 pm8001_ha->sas_addr[j] = 672 payload.func_specific[0x010 + i]; 673 } else 674 pm8001_ha->sas_addr[j] = 675 payload.func_specific[0x804 + i]; 676 } 677 678 for (i = 0; i < pm8001_ha->chip->n_phy; i++) { 679 memcpy(&pm8001_ha->phy[i].dev_sas_addr, 680 pm8001_ha->sas_addr, SAS_ADDR_SIZE); 681 PM8001_INIT_DBG(pm8001_ha, 682 pm8001_printk("phy %d sas_addr = %016llx\n", i, 683 pm8001_ha->phy[i].dev_sas_addr)); 684 } 685 kfree(payload.func_specific); 686 #else 687 for (i = 0; i < pm8001_ha->chip->n_phy; i++) { 688 pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL; 689 pm8001_ha->phy[i].dev_sas_addr = 690 cpu_to_be64((u64) 691 (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr)); 692 } 693 memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr, 694 SAS_ADDR_SIZE); 695 #endif 696 } 697 698 /* 699 * pm8001_get_phy_settings_info : Read phy setting values. 700 * @pm8001_ha : our hba. 701 */ 702 static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha) 703 { 704 705 #ifdef PM8001_READ_VPD 706 /*OPTION ROM FLASH read for the SPC cards */ 707 DECLARE_COMPLETION_ONSTACK(completion); 708 struct pm8001_ioctl_payload payload; 709 int rc; 710 711 pm8001_ha->nvmd_completion = &completion; 712 /* SAS ADDRESS read from flash / EEPROM */ 713 payload.minor_function = 6; 714 payload.offset = 0; 715 payload.length = 4096; 716 payload.func_specific = kzalloc(4096, GFP_KERNEL); 717 if (!payload.func_specific) 718 return -ENOMEM; 719 /* Read phy setting values from flash */ 720 rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload); 721 if (rc) { 722 kfree(payload.func_specific); 723 PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n")); 724 return -ENOMEM; 725 } 726 wait_for_completion(&completion); 727 pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific); 728 kfree(payload.func_specific); 729 #endif 730 return 0; 731 } 732 733 struct pm8001_mpi3_phy_pg_trx_config { 734 u32 LaneLosCfg; 735 u32 LanePgaCfg1; 736 u32 LanePisoCfg1; 737 u32 LanePisoCfg2; 738 u32 LanePisoCfg3; 739 u32 LanePisoCfg4; 740 u32 LanePisoCfg5; 741 u32 LanePisoCfg6; 742 u32 LaneBctCtrl; 743 }; 744 745 /** 746 * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings 747 * @pm8001_ha : our adapter 748 * @phycfg : PHY config page to populate 749 */ 750 static 751 void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha, 752 struct pm8001_mpi3_phy_pg_trx_config *phycfg) 753 { 754 phycfg->LaneLosCfg = 0x00000132; 755 phycfg->LanePgaCfg1 = 0x00203949; 756 phycfg->LanePisoCfg1 = 0x000000FF; 757 phycfg->LanePisoCfg2 = 0xFF000001; 758 phycfg->LanePisoCfg3 = 0xE7011300; 759 phycfg->LanePisoCfg4 = 0x631C40C0; 760 phycfg->LanePisoCfg5 = 0xF8102036; 761 phycfg->LanePisoCfg6 = 0xF74A1000; 762 phycfg->LaneBctCtrl = 0x00FB33F8; 763 } 764 765 /** 766 * pm8001_get_external_phy_settings : Retrieves the external PHY settings 767 * @pm8001_ha : our adapter 768 * @phycfg : PHY config page to populate 769 */ 770 static 771 void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha, 772 struct pm8001_mpi3_phy_pg_trx_config *phycfg) 773 { 774 phycfg->LaneLosCfg = 0x00000132; 775 phycfg->LanePgaCfg1 = 0x00203949; 776 phycfg->LanePisoCfg1 = 0x000000FF; 777 phycfg->LanePisoCfg2 = 0xFF000001; 778 phycfg->LanePisoCfg3 = 0xE7011300; 779 phycfg->LanePisoCfg4 = 0x63349140; 780 phycfg->LanePisoCfg5 = 0xF8102036; 781 phycfg->LanePisoCfg6 = 0xF80D9300; 782 phycfg->LaneBctCtrl = 0x00FB33F8; 783 } 784 785 /** 786 * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext 787 * @pm8001_ha : our adapter 788 * @phymask : The PHY mask 789 */ 790 static 791 void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask) 792 { 793 switch (pm8001_ha->pdev->subsystem_device) { 794 case 0x0070: /* H1280 - 8 external 0 internal */ 795 case 0x0072: /* H12F0 - 16 external 0 internal */ 796 *phymask = 0x0000; 797 break; 798 799 case 0x0071: /* H1208 - 0 external 8 internal */ 800 case 0x0073: /* H120F - 0 external 16 internal */ 801 *phymask = 0xFFFF; 802 break; 803 804 case 0x0080: /* H1244 - 4 external 4 internal */ 805 *phymask = 0x00F0; 806 break; 807 808 case 0x0081: /* H1248 - 4 external 8 internal */ 809 *phymask = 0x0FF0; 810 break; 811 812 case 0x0082: /* H1288 - 8 external 8 internal */ 813 *phymask = 0xFF00; 814 break; 815 816 default: 817 PM8001_INIT_DBG(pm8001_ha, 818 pm8001_printk("Unknown subsystem device=0x%.04x", 819 pm8001_ha->pdev->subsystem_device)); 820 } 821 } 822 823 /** 824 * pm8001_set_phy_settings_ven_117c_12Gb : Configure ATTO 12Gb PHY settings 825 * @pm8001_ha : our adapter 826 */ 827 static 828 int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha) 829 { 830 struct pm8001_mpi3_phy_pg_trx_config phycfg_int; 831 struct pm8001_mpi3_phy_pg_trx_config phycfg_ext; 832 int phymask = 0; 833 int i = 0; 834 835 memset(&phycfg_int, 0, sizeof(phycfg_int)); 836 memset(&phycfg_ext, 0, sizeof(phycfg_ext)); 837 838 pm8001_get_internal_phy_settings(pm8001_ha, &phycfg_int); 839 pm8001_get_external_phy_settings(pm8001_ha, &phycfg_ext); 840 pm8001_get_phy_mask(pm8001_ha, &phymask); 841 842 for (i = 0; i < pm8001_ha->chip->n_phy; i++) { 843 if (phymask & (1 << i)) {/* Internal PHY */ 844 pm8001_set_phy_profile_single(pm8001_ha, i, 845 sizeof(phycfg_int) / sizeof(u32), 846 (u32 *)&phycfg_int); 847 848 } else { /* External PHY */ 849 pm8001_set_phy_profile_single(pm8001_ha, i, 850 sizeof(phycfg_ext) / sizeof(u32), 851 (u32 *)&phycfg_ext); 852 } 853 } 854 855 return 0; 856 } 857 858 /** 859 * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID. 860 * @pm8001_ha : our hba. 861 */ 862 static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha) 863 { 864 switch (pm8001_ha->pdev->subsystem_vendor) { 865 case PCI_VENDOR_ID_ATTO: 866 if (pm8001_ha->pdev->device == 0x0042) /* 6Gb */ 867 return 0; 868 else 869 return pm8001_set_phy_settings_ven_117c_12G(pm8001_ha); 870 871 case PCI_VENDOR_ID_ADAPTEC2: 872 case 0: 873 return 0; 874 875 default: 876 return pm8001_get_phy_settings_info(pm8001_ha); 877 } 878 } 879 880 #ifdef PM8001_USE_MSIX 881 /** 882 * pm8001_setup_msix - enable MSI-X interrupt 883 * @chip_info: our ha struct. 884 * @irq_handler: irq_handler 885 */ 886 static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha) 887 { 888 u32 i = 0, j = 0; 889 u32 number_of_intr; 890 int flag = 0; 891 u32 max_entry; 892 int rc; 893 static char intr_drvname[PM8001_MAX_MSIX_VEC][sizeof(DRV_NAME)+3]; 894 895 /* SPCv controllers supports 64 msi-x */ 896 if (pm8001_ha->chip_id == chip_8001) { 897 number_of_intr = 1; 898 } else { 899 number_of_intr = PM8001_MAX_MSIX_VEC; 900 flag &= ~IRQF_SHARED; 901 } 902 903 max_entry = sizeof(pm8001_ha->msix_entries) / 904 sizeof(pm8001_ha->msix_entries[0]); 905 for (i = 0; i < max_entry ; i++) 906 pm8001_ha->msix_entries[i].entry = i; 907 rc = pci_enable_msix_exact(pm8001_ha->pdev, pm8001_ha->msix_entries, 908 number_of_intr); 909 pm8001_ha->number_of_intr = number_of_intr; 910 if (rc) 911 return rc; 912 913 PM8001_INIT_DBG(pm8001_ha, pm8001_printk( 914 "pci_enable_msix_exact request ret:%d no of intr %d\n", 915 rc, pm8001_ha->number_of_intr)); 916 917 for (i = 0; i < number_of_intr; i++) { 918 snprintf(intr_drvname[i], sizeof(intr_drvname[0]), 919 DRV_NAME"%d", i); 920 pm8001_ha->irq_vector[i].irq_id = i; 921 pm8001_ha->irq_vector[i].drv_inst = pm8001_ha; 922 923 rc = request_irq(pm8001_ha->msix_entries[i].vector, 924 pm8001_interrupt_handler_msix, flag, 925 intr_drvname[i], &(pm8001_ha->irq_vector[i])); 926 if (rc) { 927 for (j = 0; j < i; j++) { 928 free_irq(pm8001_ha->msix_entries[j].vector, 929 &(pm8001_ha->irq_vector[i])); 930 } 931 pci_disable_msix(pm8001_ha->pdev); 932 break; 933 } 934 } 935 936 return rc; 937 } 938 #endif 939 940 /** 941 * pm8001_request_irq - register interrupt 942 * @chip_info: our ha struct. 943 */ 944 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha) 945 { 946 struct pci_dev *pdev; 947 int rc; 948 949 pdev = pm8001_ha->pdev; 950 951 #ifdef PM8001_USE_MSIX 952 if (pdev->msix_cap && pci_msi_enabled()) 953 return pm8001_setup_msix(pm8001_ha); 954 else { 955 PM8001_INIT_DBG(pm8001_ha, 956 pm8001_printk("MSIX not supported!!!\n")); 957 goto intx; 958 } 959 #endif 960 961 intx: 962 /* initialize the INT-X interrupt */ 963 pm8001_ha->irq_vector[0].irq_id = 0; 964 pm8001_ha->irq_vector[0].drv_inst = pm8001_ha; 965 rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED, 966 DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost)); 967 return rc; 968 } 969 970 /** 971 * pm8001_pci_probe - probe supported device 972 * @pdev: pci device which kernel has been prepared for. 973 * @ent: pci device id 974 * 975 * This function is the main initialization function, when register a new 976 * pci driver it is invoked, all struct an hardware initilization should be done 977 * here, also, register interrupt 978 */ 979 static int pm8001_pci_probe(struct pci_dev *pdev, 980 const struct pci_device_id *ent) 981 { 982 unsigned int rc; 983 u32 pci_reg; 984 u8 i = 0; 985 struct pm8001_hba_info *pm8001_ha; 986 struct Scsi_Host *shost = NULL; 987 const struct pm8001_chip_info *chip; 988 989 dev_printk(KERN_INFO, &pdev->dev, 990 "pm80xx: driver version %s\n", DRV_VERSION); 991 rc = pci_enable_device(pdev); 992 if (rc) 993 goto err_out_enable; 994 pci_set_master(pdev); 995 /* 996 * Enable pci slot busmaster by setting pci command register. 997 * This is required by FW for Cyclone card. 998 */ 999 1000 pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg); 1001 pci_reg |= 0x157; 1002 pci_write_config_dword(pdev, PCI_COMMAND, pci_reg); 1003 rc = pci_request_regions(pdev, DRV_NAME); 1004 if (rc) 1005 goto err_out_disable; 1006 rc = pci_go_44(pdev); 1007 if (rc) 1008 goto err_out_regions; 1009 1010 shost = scsi_host_alloc(&pm8001_sht, sizeof(void *)); 1011 if (!shost) { 1012 rc = -ENOMEM; 1013 goto err_out_regions; 1014 } 1015 chip = &pm8001_chips[ent->driver_data]; 1016 SHOST_TO_SAS_HA(shost) = 1017 kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL); 1018 if (!SHOST_TO_SAS_HA(shost)) { 1019 rc = -ENOMEM; 1020 goto err_out_free_host; 1021 } 1022 1023 rc = pm8001_prep_sas_ha_init(shost, chip); 1024 if (rc) { 1025 rc = -ENOMEM; 1026 goto err_out_free; 1027 } 1028 pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost)); 1029 /* ent->driver variable is used to differentiate between controllers */ 1030 pm8001_ha = pm8001_pci_alloc(pdev, ent, shost); 1031 if (!pm8001_ha) { 1032 rc = -ENOMEM; 1033 goto err_out_free; 1034 } 1035 list_add_tail(&pm8001_ha->list, &hba_list); 1036 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha); 1037 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha); 1038 if (rc) { 1039 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( 1040 "chip_init failed [ret: %d]\n", rc)); 1041 goto err_out_ha_free; 1042 } 1043 1044 rc = scsi_add_host(shost, &pdev->dev); 1045 if (rc) 1046 goto err_out_ha_free; 1047 rc = pm8001_request_irq(pm8001_ha); 1048 if (rc) { 1049 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( 1050 "pm8001_request_irq failed [ret: %d]\n", rc)); 1051 goto err_out_shost; 1052 } 1053 1054 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0); 1055 if (pm8001_ha->chip_id != chip_8001) { 1056 for (i = 1; i < pm8001_ha->number_of_intr; i++) 1057 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i); 1058 /* setup thermal configuration. */ 1059 pm80xx_set_thermal_config(pm8001_ha); 1060 } 1061 1062 pm8001_init_sas_add(pm8001_ha); 1063 /* phy setting support for motherboard controller */ 1064 if (pm8001_configure_phy_settings(pm8001_ha)) 1065 goto err_out_shost; 1066 1067 pm8001_post_sas_ha_init(shost, chip); 1068 rc = sas_register_ha(SHOST_TO_SAS_HA(shost)); 1069 if (rc) 1070 goto err_out_shost; 1071 scsi_scan_host(pm8001_ha->shost); 1072 return 0; 1073 1074 err_out_shost: 1075 scsi_remove_host(pm8001_ha->shost); 1076 err_out_ha_free: 1077 pm8001_free(pm8001_ha); 1078 err_out_free: 1079 kfree(SHOST_TO_SAS_HA(shost)); 1080 err_out_free_host: 1081 kfree(shost); 1082 err_out_regions: 1083 pci_release_regions(pdev); 1084 err_out_disable: 1085 pci_disable_device(pdev); 1086 err_out_enable: 1087 return rc; 1088 } 1089 1090 static void pm8001_pci_remove(struct pci_dev *pdev) 1091 { 1092 struct sas_ha_struct *sha = pci_get_drvdata(pdev); 1093 struct pm8001_hba_info *pm8001_ha; 1094 int i, j; 1095 pm8001_ha = sha->lldd_ha; 1096 scsi_remove_host(pm8001_ha->shost); 1097 sas_unregister_ha(sha); 1098 sas_remove_host(pm8001_ha->shost); 1099 list_del(&pm8001_ha->list); 1100 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF); 1101 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha); 1102 1103 #ifdef PM8001_USE_MSIX 1104 for (i = 0; i < pm8001_ha->number_of_intr; i++) 1105 synchronize_irq(pm8001_ha->msix_entries[i].vector); 1106 for (i = 0; i < pm8001_ha->number_of_intr; i++) 1107 free_irq(pm8001_ha->msix_entries[i].vector, 1108 &(pm8001_ha->irq_vector[i])); 1109 pci_disable_msix(pdev); 1110 #else 1111 free_irq(pm8001_ha->irq, sha); 1112 #endif 1113 #ifdef PM8001_USE_TASKLET 1114 /* For non-msix and msix interrupts */ 1115 if ((!pdev->msix_cap || !pci_msi_enabled()) || 1116 (pm8001_ha->chip_id == chip_8001)) 1117 tasklet_kill(&pm8001_ha->tasklet[0]); 1118 else 1119 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) 1120 tasklet_kill(&pm8001_ha->tasklet[j]); 1121 #endif 1122 pm8001_free(pm8001_ha); 1123 kfree(sha->sas_phy); 1124 kfree(sha->sas_port); 1125 kfree(sha); 1126 pci_release_regions(pdev); 1127 pci_disable_device(pdev); 1128 } 1129 1130 /** 1131 * pm8001_pci_suspend - power management suspend main entry point 1132 * @pdev: PCI device struct 1133 * @state: PM state change to (usually PCI_D3) 1134 * 1135 * Returns 0 success, anything else error. 1136 */ 1137 static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state) 1138 { 1139 struct sas_ha_struct *sha = pci_get_drvdata(pdev); 1140 struct pm8001_hba_info *pm8001_ha; 1141 int i, j; 1142 u32 device_state; 1143 pm8001_ha = sha->lldd_ha; 1144 sas_suspend_ha(sha); 1145 flush_workqueue(pm8001_wq); 1146 scsi_block_requests(pm8001_ha->shost); 1147 if (!pdev->pm_cap) { 1148 dev_err(&pdev->dev, " PCI PM not supported\n"); 1149 return -ENODEV; 1150 } 1151 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF); 1152 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha); 1153 #ifdef PM8001_USE_MSIX 1154 for (i = 0; i < pm8001_ha->number_of_intr; i++) 1155 synchronize_irq(pm8001_ha->msix_entries[i].vector); 1156 for (i = 0; i < pm8001_ha->number_of_intr; i++) 1157 free_irq(pm8001_ha->msix_entries[i].vector, 1158 &(pm8001_ha->irq_vector[i])); 1159 pci_disable_msix(pdev); 1160 #else 1161 free_irq(pm8001_ha->irq, sha); 1162 #endif 1163 #ifdef PM8001_USE_TASKLET 1164 /* For non-msix and msix interrupts */ 1165 if ((!pdev->msix_cap || !pci_msi_enabled()) || 1166 (pm8001_ha->chip_id == chip_8001)) 1167 tasklet_kill(&pm8001_ha->tasklet[0]); 1168 else 1169 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) 1170 tasklet_kill(&pm8001_ha->tasklet[j]); 1171 #endif 1172 device_state = pci_choose_state(pdev, state); 1173 pm8001_printk("pdev=0x%p, slot=%s, entering " 1174 "operating state [D%d]\n", pdev, 1175 pm8001_ha->name, device_state); 1176 pci_save_state(pdev); 1177 pci_disable_device(pdev); 1178 pci_set_power_state(pdev, device_state); 1179 return 0; 1180 } 1181 1182 /** 1183 * pm8001_pci_resume - power management resume main entry point 1184 * @pdev: PCI device struct 1185 * 1186 * Returns 0 success, anything else error. 1187 */ 1188 static int pm8001_pci_resume(struct pci_dev *pdev) 1189 { 1190 struct sas_ha_struct *sha = pci_get_drvdata(pdev); 1191 struct pm8001_hba_info *pm8001_ha; 1192 int rc; 1193 u8 i = 0, j; 1194 u32 device_state; 1195 DECLARE_COMPLETION_ONSTACK(completion); 1196 pm8001_ha = sha->lldd_ha; 1197 device_state = pdev->current_state; 1198 1199 pm8001_printk("pdev=0x%p, slot=%s, resuming from previous " 1200 "operating state [D%d]\n", pdev, pm8001_ha->name, device_state); 1201 1202 pci_set_power_state(pdev, PCI_D0); 1203 pci_enable_wake(pdev, PCI_D0, 0); 1204 pci_restore_state(pdev); 1205 rc = pci_enable_device(pdev); 1206 if (rc) { 1207 pm8001_printk("slot=%s Enable device failed during resume\n", 1208 pm8001_ha->name); 1209 goto err_out_enable; 1210 } 1211 1212 pci_set_master(pdev); 1213 rc = pci_go_44(pdev); 1214 if (rc) 1215 goto err_out_disable; 1216 sas_prep_resume_ha(sha); 1217 /* chip soft rst only for spc */ 1218 if (pm8001_ha->chip_id == chip_8001) { 1219 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha); 1220 PM8001_INIT_DBG(pm8001_ha, 1221 pm8001_printk("chip soft reset successful\n")); 1222 } 1223 rc = PM8001_CHIP_DISP->chip_init(pm8001_ha); 1224 if (rc) 1225 goto err_out_disable; 1226 1227 /* disable all the interrupt bits */ 1228 PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF); 1229 1230 rc = pm8001_request_irq(pm8001_ha); 1231 if (rc) 1232 goto err_out_disable; 1233 #ifdef PM8001_USE_TASKLET 1234 /* Tasklet for non msi-x interrupt handler */ 1235 if ((!pdev->msix_cap || !pci_msi_enabled()) || 1236 (pm8001_ha->chip_id == chip_8001)) 1237 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet, 1238 (unsigned long)&(pm8001_ha->irq_vector[0])); 1239 else 1240 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++) 1241 tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet, 1242 (unsigned long)&(pm8001_ha->irq_vector[j])); 1243 #endif 1244 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0); 1245 if (pm8001_ha->chip_id != chip_8001) { 1246 for (i = 1; i < pm8001_ha->number_of_intr; i++) 1247 PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i); 1248 } 1249 1250 /* Chip documentation for the 8070 and 8072 SPCv */ 1251 /* states that a 500ms minimum delay is required */ 1252 /* before issuing commands. Otherwise, the firmare */ 1253 /* will enter an unrecoverable state. */ 1254 1255 if (pm8001_ha->chip_id == chip_8070 || 1256 pm8001_ha->chip_id == chip_8072) { 1257 mdelay(500); 1258 } 1259 1260 /* Spin up the PHYs */ 1261 1262 pm8001_ha->flags = PM8001F_RUN_TIME; 1263 for (i = 0; i < pm8001_ha->chip->n_phy; i++) { 1264 pm8001_ha->phy[i].enable_completion = &completion; 1265 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i); 1266 wait_for_completion(&completion); 1267 } 1268 sas_resume_ha(sha); 1269 return 0; 1270 1271 err_out_disable: 1272 scsi_remove_host(pm8001_ha->shost); 1273 pci_disable_device(pdev); 1274 err_out_enable: 1275 return rc; 1276 } 1277 1278 /* update of pci device, vendor id and driver data with 1279 * unique value for each of the controller 1280 */ 1281 static struct pci_device_id pm8001_pci_table[] = { 1282 { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 }, 1283 { PCI_VDEVICE(PMC_Sierra, 0x8006), chip_8006 }, 1284 { PCI_VDEVICE(ADAPTEC2, 0x8006), chip_8006 }, 1285 { PCI_VDEVICE(ATTO, 0x0042), chip_8001 }, 1286 /* Support for SPC/SPCv/SPCve controllers */ 1287 { PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 }, 1288 { PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 }, 1289 { PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 }, 1290 { PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 }, 1291 { PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 }, 1292 { PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 }, 1293 { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 }, 1294 { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 }, 1295 { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 }, 1296 { PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 }, 1297 { PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 }, 1298 { PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 }, 1299 { PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 }, 1300 { PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 }, 1301 { PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 }, 1302 { PCI_VENDOR_ID_ADAPTEC2, 0x8081, 1303 PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 }, 1304 { PCI_VENDOR_ID_ADAPTEC2, 0x8081, 1305 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 }, 1306 { PCI_VENDOR_ID_ADAPTEC2, 0x8088, 1307 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 }, 1308 { PCI_VENDOR_ID_ADAPTEC2, 0x8088, 1309 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 }, 1310 { PCI_VENDOR_ID_ADAPTEC2, 0x8089, 1311 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 }, 1312 { PCI_VENDOR_ID_ADAPTEC2, 0x8089, 1313 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 }, 1314 { PCI_VENDOR_ID_ADAPTEC2, 0x8088, 1315 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 }, 1316 { PCI_VENDOR_ID_ADAPTEC2, 0x8088, 1317 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 }, 1318 { PCI_VENDOR_ID_ADAPTEC2, 0x8089, 1319 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 }, 1320 { PCI_VENDOR_ID_ADAPTEC2, 0x8089, 1321 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 }, 1322 { PCI_VENDOR_ID_ADAPTEC2, 0x8074, 1323 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 }, 1324 { PCI_VENDOR_ID_ADAPTEC2, 0x8076, 1325 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 }, 1326 { PCI_VENDOR_ID_ADAPTEC2, 0x8077, 1327 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 }, 1328 { PCI_VENDOR_ID_ADAPTEC2, 0x8074, 1329 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 }, 1330 { PCI_VENDOR_ID_ADAPTEC2, 0x8076, 1331 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 }, 1332 { PCI_VENDOR_ID_ADAPTEC2, 0x8077, 1333 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 }, 1334 { PCI_VENDOR_ID_ADAPTEC2, 0x8076, 1335 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 }, 1336 { PCI_VENDOR_ID_ADAPTEC2, 0x8077, 1337 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 }, 1338 { PCI_VENDOR_ID_ADAPTEC2, 0x8074, 1339 PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 }, 1340 { PCI_VENDOR_ID_ATTO, 0x8070, 1341 PCI_VENDOR_ID_ATTO, 0x0070, 0, 0, chip_8070 }, 1342 { PCI_VENDOR_ID_ATTO, 0x8070, 1343 PCI_VENDOR_ID_ATTO, 0x0071, 0, 0, chip_8070 }, 1344 { PCI_VENDOR_ID_ATTO, 0x8072, 1345 PCI_VENDOR_ID_ATTO, 0x0072, 0, 0, chip_8072 }, 1346 { PCI_VENDOR_ID_ATTO, 0x8072, 1347 PCI_VENDOR_ID_ATTO, 0x0073, 0, 0, chip_8072 }, 1348 { PCI_VENDOR_ID_ATTO, 0x8070, 1349 PCI_VENDOR_ID_ATTO, 0x0080, 0, 0, chip_8070 }, 1350 { PCI_VENDOR_ID_ATTO, 0x8072, 1351 PCI_VENDOR_ID_ATTO, 0x0081, 0, 0, chip_8072 }, 1352 { PCI_VENDOR_ID_ATTO, 0x8072, 1353 PCI_VENDOR_ID_ATTO, 0x0082, 0, 0, chip_8072 }, 1354 {} /* terminate list */ 1355 }; 1356 1357 static struct pci_driver pm8001_pci_driver = { 1358 .name = DRV_NAME, 1359 .id_table = pm8001_pci_table, 1360 .probe = pm8001_pci_probe, 1361 .remove = pm8001_pci_remove, 1362 .suspend = pm8001_pci_suspend, 1363 .resume = pm8001_pci_resume, 1364 }; 1365 1366 /** 1367 * pm8001_init - initialize scsi transport template 1368 */ 1369 static int __init pm8001_init(void) 1370 { 1371 int rc = -ENOMEM; 1372 1373 pm8001_wq = alloc_workqueue("pm80xx", 0, 0); 1374 if (!pm8001_wq) 1375 goto err; 1376 1377 pm8001_id = 0; 1378 pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops); 1379 if (!pm8001_stt) 1380 goto err_wq; 1381 rc = pci_register_driver(&pm8001_pci_driver); 1382 if (rc) 1383 goto err_tp; 1384 return 0; 1385 1386 err_tp: 1387 sas_release_transport(pm8001_stt); 1388 err_wq: 1389 destroy_workqueue(pm8001_wq); 1390 err: 1391 return rc; 1392 } 1393 1394 static void __exit pm8001_exit(void) 1395 { 1396 pci_unregister_driver(&pm8001_pci_driver); 1397 sas_release_transport(pm8001_stt); 1398 destroy_workqueue(pm8001_wq); 1399 } 1400 1401 module_init(pm8001_init); 1402 module_exit(pm8001_exit); 1403 1404 MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>"); 1405 MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>"); 1406 MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>"); 1407 MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>"); 1408 MODULE_DESCRIPTION( 1409 "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077/8070/8072 " 1410 "SAS/SATA controller driver"); 1411 MODULE_VERSION(DRV_VERSION); 1412 MODULE_LICENSE("GPL"); 1413 MODULE_DEVICE_TABLE(pci, pm8001_pci_table); 1414 1415