1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Workbit NinjaSCSI-32Bi/UDE PCI/CardBus SCSI Host Bus Adapter driver 4 * Basic data header 5 */ 6 7 #ifndef _NSP32_H 8 #define _NSP32_H 9 10 //#define NSP32_DEBUG 9 11 12 /* 13 * VENDOR/DEVICE ID 14 */ 15 #define PCI_VENDOR_ID_IODATA 0x10fc 16 #define PCI_VENDOR_ID_WORKBIT 0x1145 17 18 #define PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II 0x0005 19 #define PCI_DEVICE_ID_NINJASCSI_32BI_KME 0xf007 20 #define PCI_DEVICE_ID_NINJASCSI_32BI_WBT 0x8007 21 #define PCI_DEVICE_ID_WORKBIT_STANDARD 0xf010 22 #define PCI_DEVICE_ID_WORKBIT_DUALEDGE 0xf011 23 #define PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC 0xf012 24 #define PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC 0xf013 25 #define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO 0xf015 26 #define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II 0x8009 27 28 /* 29 * MODEL 30 */ 31 enum { 32 MODEL_IODATA = 0, 33 MODEL_KME = 1, 34 MODEL_WORKBIT = 2, 35 MODEL_LOGITEC = 3, 36 MODEL_PCI_WORKBIT = 4, 37 MODEL_PCI_LOGITEC = 5, 38 MODEL_PCI_MELCO = 6, 39 }; 40 41 static char * nsp32_model[] = { 42 "I-O DATA CBSC-II CardBus card", 43 "KME SCSI CardBus card", 44 "Workbit duo SCSI CardBus card", 45 "Logitec CardBus card with external ROM", 46 "Workbit / I-O DATA PCI card", 47 "Logitec PCI card with external ROM", 48 "Melco CardBus/PCI card with external ROM", 49 }; 50 51 52 /* 53 * SCSI Generic Definitions 54 */ 55 #define EXTENDED_SDTR_LEN 0x03 56 57 /* Little Endian */ 58 typedef u32 u32_le; 59 typedef u16 u16_le; 60 61 /* 62 * BASIC Definitions 63 */ 64 #ifndef TRUE 65 # define TRUE 1 66 #endif 67 #ifndef FALSE 68 # define FALSE 0 69 #endif 70 #define ASSERT 1 71 #define NEGATE 0 72 73 74 /*******************/ 75 /* normal register */ 76 /*******************/ 77 /* 78 * Don't access below register with Double Word: 79 * +00, +04, +08, +0c, +64, +80, +84, +88, +90, +c4, +c8, +cc, +d0. 80 */ 81 #define IRQ_CONTROL 0x00 /* BASE+00, W, W */ 82 #define IRQ_STATUS 0x00 /* BASE+00, W, R */ 83 # define IRQSTATUS_LATCHED_MSG BIT(0) 84 # define IRQSTATUS_LATCHED_IO BIT(1) 85 # define IRQSTATUS_LATCHED_CD BIT(2) 86 # define IRQSTATUS_LATCHED_BUS_FREE BIT(3) 87 # define IRQSTATUS_RESELECT_OCCUER BIT(4) 88 # define IRQSTATUS_PHASE_CHANGE_IRQ BIT(5) 89 # define IRQSTATUS_SCSIRESET_IRQ BIT(6) 90 # define IRQSTATUS_TIMER_IRQ BIT(7) 91 # define IRQSTATUS_FIFO_SHLD_IRQ BIT(8) 92 # define IRQSTATUS_PCI_IRQ BIT(9) 93 # define IRQSTATUS_BMCNTERR_IRQ BIT(10) 94 # define IRQSTATUS_AUTOSCSI_IRQ BIT(11) 95 # define PCI_IRQ_MASK BIT(12) 96 # define TIMER_IRQ_MASK BIT(13) 97 # define FIFO_IRQ_MASK BIT(14) 98 # define SCSI_IRQ_MASK BIT(15) 99 # define IRQ_CONTROL_ALL_IRQ_MASK (PCI_IRQ_MASK | \ 100 TIMER_IRQ_MASK | \ 101 FIFO_IRQ_MASK | \ 102 SCSI_IRQ_MASK ) 103 # define IRQSTATUS_ANY_IRQ (IRQSTATUS_RESELECT_OCCUER | \ 104 IRQSTATUS_PHASE_CHANGE_IRQ | \ 105 IRQSTATUS_SCSIRESET_IRQ | \ 106 IRQSTATUS_TIMER_IRQ | \ 107 IRQSTATUS_FIFO_SHLD_IRQ | \ 108 IRQSTATUS_PCI_IRQ | \ 109 IRQSTATUS_BMCNTERR_IRQ | \ 110 IRQSTATUS_AUTOSCSI_IRQ ) 111 112 #define TRANSFER_CONTROL 0x02 /* BASE+02, W, W */ 113 #define TRANSFER_STATUS 0x02 /* BASE+02, W, R */ 114 # define CB_MMIO_MODE BIT(0) 115 # define CB_IO_MODE BIT(1) 116 # define BM_TEST BIT(2) 117 # define BM_TEST_DIR BIT(3) 118 # define DUAL_EDGE_ENABLE BIT(4) 119 # define NO_TRANSFER_TO_HOST BIT(5) 120 # define TRANSFER_GO BIT(7) 121 # define BLIEND_MODE BIT(8) 122 # define BM_START BIT(9) 123 # define ADVANCED_BM_WRITE BIT(10) 124 # define BM_SINGLE_MODE BIT(11) 125 # define FIFO_TRUE_FULL BIT(12) 126 # define FIFO_TRUE_EMPTY BIT(13) 127 # define ALL_COUNTER_CLR BIT(14) 128 # define FIFOTEST BIT(15) 129 130 #define INDEX_REG 0x04 /* BASE+04, Byte(R/W), Word(R) */ 131 132 #define TIMER_SET 0x06 /* BASE+06, W, R/W */ 133 # define TIMER_CNT_MASK (0xff) 134 # define TIMER_STOP BIT(8) 135 136 #define DATA_REG_LOW 0x08 /* BASE+08, LowW, R/W */ 137 #define DATA_REG_HI 0x0a /* BASE+0a, Hi-W, R/W */ 138 139 #define FIFO_REST_CNT 0x0c /* BASE+0c, W, R/W */ 140 # define FIFO_REST_MASK 0x1ff 141 # define FIFO_EMPTY_SHLD_FLAG BIT(14) 142 # define FIFO_FULL_SHLD_FLAG BIT(15) 143 144 #define SREQ_SMPL_RATE 0x0f /* BASE+0f, B, R/W */ 145 # define SREQSMPLRATE_RATE0 BIT(0) 146 # define SREQSMPLRATE_RATE1 BIT(1) 147 # define SAMPLING_ENABLE BIT(2) 148 # define SMPL_40M (0) /* 40MHz: 0-100ns/period */ 149 # define SMPL_20M (SREQSMPLRATE_RATE0) /* 20MHz: 100-200ns/period */ 150 # define SMPL_10M (SREQSMPLRATE_RATE1) /* 10Mhz: 200- ns/period */ 151 152 #define SCSI_BUS_CONTROL 0x10 /* BASE+10, B, R/W */ 153 # define BUSCTL_SEL BIT(0) 154 # define BUSCTL_RST BIT(1) 155 # define BUSCTL_DATAOUT_ENB BIT(2) 156 # define BUSCTL_ATN BIT(3) 157 # define BUSCTL_ACK BIT(4) 158 # define BUSCTL_BSY BIT(5) 159 # define AUTODIRECTION BIT(6) 160 # define ACKENB BIT(7) 161 162 #define CLR_COUNTER 0x12 /* BASE+12, B, W */ 163 # define ACK_COUNTER_CLR BIT(0) 164 # define SREQ_COUNTER_CLR BIT(1) 165 # define FIFO_HOST_POINTER_CLR BIT(2) 166 # define FIFO_REST_COUNT_CLR BIT(3) 167 # define BM_COUNTER_CLR BIT(4) 168 # define SAVED_ACK_CLR BIT(5) 169 # define CLRCOUNTER_ALLMASK (ACK_COUNTER_CLR | \ 170 SREQ_COUNTER_CLR | \ 171 FIFO_HOST_POINTER_CLR | \ 172 FIFO_REST_COUNT_CLR | \ 173 BM_COUNTER_CLR | \ 174 SAVED_ACK_CLR ) 175 176 #define SCSI_BUS_MONITOR 0x12 /* BASE+12, B, R */ 177 # define BUSMON_MSG BIT(0) 178 # define BUSMON_IO BIT(1) 179 # define BUSMON_CD BIT(2) 180 # define BUSMON_BSY BIT(3) 181 # define BUSMON_ACK BIT(4) 182 # define BUSMON_REQ BIT(5) 183 # define BUSMON_SEL BIT(6) 184 # define BUSMON_ATN BIT(7) 185 186 #define COMMAND_DATA 0x14 /* BASE+14, B, R/W */ 187 188 #define PARITY_CONTROL 0x16 /* BASE+16, B, W */ 189 # define PARITY_CHECK_ENABLE BIT(0) 190 # define PARITY_ERROR_CLEAR BIT(1) 191 #define PARITY_STATUS 0x16 /* BASE+16, B, R */ 192 //# define PARITY_CHECK_ENABLE BIT(0) 193 # define PARITY_ERROR_NORMAL BIT(1) 194 # define PARITY_ERROR_LSB BIT(1) 195 # define PARITY_ERROR_MSB BIT(2) 196 197 #define RESELECT_ID 0x18 /* BASE+18, B, R */ 198 199 #define COMMAND_CONTROL 0x18 /* BASE+18, W, W */ 200 # define CLEAR_CDB_FIFO_POINTER BIT(0) 201 # define AUTO_COMMAND_PHASE BIT(1) 202 # define AUTOSCSI_START BIT(2) 203 # define AUTOSCSI_RESTART BIT(3) 204 # define AUTO_PARAMETER BIT(4) 205 # define AUTO_ATN BIT(5) 206 # define AUTO_MSGIN_00_OR_04 BIT(6) 207 # define AUTO_MSGIN_02 BIT(7) 208 # define AUTO_MSGIN_03 BIT(8) 209 210 #define SET_ARBIT 0x1a /* BASE+1a, B, W */ 211 # define ARBIT_GO BIT(0) 212 # define ARBIT_CLEAR BIT(1) 213 214 #define ARBIT_STATUS 0x1a /* BASE+1a, B, R */ 215 //# define ARBIT_GO BIT(0) 216 # define ARBIT_WIN BIT(1) 217 # define ARBIT_FAIL BIT(2) 218 # define AUTO_PARAMETER_VALID BIT(3) 219 # define SGT_VALID BIT(4) 220 221 #define SYNC_REG 0x1c /* BASE+1c, B, R/W */ 222 223 #define ACK_WIDTH 0x1d /* BASE+1d, B, R/W */ 224 225 #define SCSI_DATA_WITH_ACK 0x20 /* BASE+20, B, R/W */ 226 #define SCSI_OUT_LATCH_TARGET_ID 0x22 /* BASE+22, B, W */ 227 #define SCSI_DATA_IN 0x22 /* BASE+22, B, R */ 228 229 #define SCAM_CONTROL 0x24 /* BASE+24, B, W */ 230 #define SCAM_STATUS 0x24 /* BASE+24, B, R */ 231 # define SCAM_MSG BIT(0) 232 # define SCAM_IO BIT(1) 233 # define SCAM_CD BIT(2) 234 # define SCAM_BSY BIT(3) 235 # define SCAM_SEL BIT(4) 236 # define SCAM_XFEROK BIT(5) 237 238 #define SCAM_DATA 0x26 /* BASE+26, B, R/W */ 239 # define SD0 BIT(0) 240 # define SD1 BIT(1) 241 # define SD2 BIT(2) 242 # define SD3 BIT(3) 243 # define SD4 BIT(4) 244 # define SD5 BIT(5) 245 # define SD6 BIT(6) 246 # define SD7 BIT(7) 247 248 #define SACK_CNT 0x28 /* BASE+28, DW, R/W */ 249 #define SREQ_CNT 0x2c /* BASE+2c, DW, R/W */ 250 251 #define FIFO_DATA_LOW 0x30 /* BASE+30, B/W/DW, R/W */ 252 #define FIFO_DATA_HIGH 0x32 /* BASE+32, B/W, R/W */ 253 #define BM_START_ADR 0x34 /* BASE+34, DW, R/W */ 254 255 #define BM_CNT 0x38 /* BASE+38, DW, R/W */ 256 # define BM_COUNT_MASK 0x0001ffffUL 257 # define SGTEND BIT(31) /* Last SGT marker */ 258 259 #define SGT_ADR 0x3c /* BASE+3c, DW, R/W */ 260 #define WAIT_REG 0x40 /* Bi only */ 261 262 #define SCSI_EXECUTE_PHASE 0x40 /* BASE+40, W, R */ 263 # define COMMAND_PHASE BIT(0) 264 # define DATA_IN_PHASE BIT(1) 265 # define DATA_OUT_PHASE BIT(2) 266 # define MSGOUT_PHASE BIT(3) 267 # define STATUS_PHASE BIT(4) 268 # define ILLEGAL_PHASE BIT(5) 269 # define BUS_FREE_OCCUER BIT(6) 270 # define MSG_IN_OCCUER BIT(7) 271 # define MSG_OUT_OCCUER BIT(8) 272 # define SELECTION_TIMEOUT BIT(9) 273 # define MSGIN_00_VALID BIT(10) 274 # define MSGIN_02_VALID BIT(11) 275 # define MSGIN_03_VALID BIT(12) 276 # define MSGIN_04_VALID BIT(13) 277 # define AUTOSCSI_BUSY BIT(15) 278 279 #define SCSI_CSB_IN 0x42 /* BASE+42, B, R */ 280 281 #define SCSI_MSG_OUT 0x44 /* BASE+44, DW, R/W */ 282 # define MSGOUT_COUNT_MASK (BIT(0)|BIT(1)) 283 # define MV_VALID BIT(7) 284 285 #define SEL_TIME_OUT 0x48 /* BASE+48, W, R/W */ 286 #define SAVED_SACK_CNT 0x4c /* BASE+4c, DW, R */ 287 288 #define HTOSDATADELAY 0x50 /* BASE+50, B, R/W */ 289 #define STOHDATADELAY 0x54 /* BASE+54, B, R/W */ 290 #define ACKSUMCHECKRD 0x58 /* BASE+58, W, R */ 291 #define REQSUMCHECKRD 0x5c /* BASE+5c, W, R */ 292 293 294 /********************/ 295 /* indexed register */ 296 /********************/ 297 298 #define CLOCK_DIV 0x00 /* BASE+08, IDX+00, B, R/W */ 299 # define CLOCK_2 BIT(0) /* MCLK/2 */ 300 # define CLOCK_4 BIT(1) /* MCLK/4 */ 301 # define PCICLK BIT(7) /* PCICLK (33MHz) */ 302 303 #define TERM_PWR_CONTROL 0x01 /* BASE+08, IDX+01, B, R/W */ 304 # define BPWR BIT(0) 305 # define SENSE BIT(1) /* Read Only */ 306 307 #define EXT_PORT_DDR 0x02 /* BASE+08, IDX+02, B, R/W */ 308 #define EXT_PORT 0x03 /* BASE+08, IDX+03, B, R/W */ 309 # define LED_ON (0) 310 # define LED_OFF BIT(0) 311 312 #define IRQ_SELECT 0x04 /* BASE+08, IDX+04, W, R/W */ 313 # define IRQSELECT_RESELECT_IRQ BIT(0) 314 # define IRQSELECT_PHASE_CHANGE_IRQ BIT(1) 315 # define IRQSELECT_SCSIRESET_IRQ BIT(2) 316 # define IRQSELECT_TIMER_IRQ BIT(3) 317 # define IRQSELECT_FIFO_SHLD_IRQ BIT(4) 318 # define IRQSELECT_TARGET_ABORT_IRQ BIT(5) 319 # define IRQSELECT_MASTER_ABORT_IRQ BIT(6) 320 # define IRQSELECT_SERR_IRQ BIT(7) 321 # define IRQSELECT_PERR_IRQ BIT(8) 322 # define IRQSELECT_BMCNTERR_IRQ BIT(9) 323 # define IRQSELECT_AUTO_SCSI_SEQ_IRQ BIT(10) 324 325 #define OLD_SCSI_PHASE 0x05 /* BASE+08, IDX+05, B, R */ 326 # define OLD_MSG BIT(0) 327 # define OLD_IO BIT(1) 328 # define OLD_CD BIT(2) 329 # define OLD_BUSY BIT(3) 330 331 #define FIFO_FULL_SHLD_COUNT 0x06 /* BASE+08, IDX+06, B, R/W */ 332 #define FIFO_EMPTY_SHLD_COUNT 0x07 /* BASE+08, IDX+07, B, R/W */ 333 334 #define EXP_ROM_CONTROL 0x08 /* BASE+08, IDX+08, B, R/W */ /* external ROM control */ 335 # define ROM_WRITE_ENB BIT(0) 336 # define IO_ACCESS_ENB BIT(1) 337 # define ROM_ADR_CLEAR BIT(2) 338 339 #define EXP_ROM_ADR 0x09 /* BASE+08, IDX+09, W, R/W */ 340 341 #define EXP_ROM_DATA 0x0a /* BASE+08, IDX+0a, B, R/W */ 342 343 #define CHIP_MODE 0x0b /* BASE+08, IDX+0b, B, R */ /* NinjaSCSI-32Bi only */ 344 # define OEM0 BIT(1) /* OEM select */ /* 00=I-O DATA, 01=KME, 10=Workbit, 11=Ext ROM */ 345 # define OEM1 BIT(2) /* OEM select */ 346 # define OPTB BIT(3) /* KME mode select */ 347 # define OPTC BIT(4) /* KME mode select */ 348 # define OPTD BIT(5) /* KME mode select */ 349 # define OPTE BIT(6) /* KME mode select */ 350 # define OPTF BIT(7) /* Power management */ 351 352 #define MISC_WR 0x0c /* BASE+08, IDX+0c, W, R/W */ 353 #define MISC_RD 0x0c 354 # define SCSI_DIRECTION_DETECTOR_SELECT BIT(0) 355 # define SCSI2_HOST_DIRECTION_VALID BIT(1) /* Read only */ 356 # define HOST2_SCSI_DIRECTION_VALID BIT(2) /* Read only */ 357 # define DELAYED_BMSTART BIT(3) 358 # define MASTER_TERMINATION_SELECT BIT(4) 359 # define BMREQ_NEGATE_TIMING_SEL BIT(5) 360 # define AUTOSEL_TIMING_SEL BIT(6) 361 # define MISC_MABORT_MASK BIT(7) 362 # define BMSTOP_CHANGE2_NONDATA_PHASE BIT(8) 363 364 #define BM_CYCLE 0x0d /* BASE+08, IDX+0d, B, R/W */ 365 # define BM_CYCLE0 BIT(0) 366 # define BM_CYCLE1 BIT(1) 367 # define BM_FRAME_ASSERT_TIMING BIT(2) 368 # define BM_IRDY_ASSERT_TIMING BIT(3) 369 # define BM_SINGLE_BUS_MASTER BIT(4) 370 # define MEMRD_CMD0 BIT(5) 371 # define SGT_AUTO_PARA_MEMED_CMD BIT(6) 372 # define MEMRD_CMD1 BIT(7) 373 374 375 #define SREQ_EDGH 0x0e /* BASE+08, IDX+0e, B, W */ 376 # define SREQ_EDGH_SELECT BIT(0) 377 378 #define UP_CNT 0x0f /* BASE+08, IDX+0f, B, W */ 379 # define REQCNT_UP BIT(0) 380 # define ACKCNT_UP BIT(1) 381 # define BMADR_UP BIT(4) 382 # define BMCNT_UP BIT(5) 383 # define SGT_CNT_UP BIT(7) 384 385 #define CFG_CMD_STR 0x10 /* BASE+08, IDX+10, W, R */ 386 #define CFG_LATE_CACHE 0x11 /* BASE+08, IDX+11, W, R/W */ 387 #define CFG_BASE_ADR_1 0x12 /* BASE+08, IDX+12, W, R */ 388 #define CFG_BASE_ADR_2 0x13 /* BASE+08, IDX+13, W, R */ 389 #define CFG_INLINE 0x14 /* BASE+08, IDX+14, W, R */ 390 391 #define SERIAL_ROM_CTL 0x15 /* BASE+08, IDX+15, B, R */ 392 # define SCL BIT(0) 393 # define ENA BIT(1) 394 # define SDA BIT(2) 395 396 #define FIFO_HST_POINTER 0x16 /* BASE+08, IDX+16, B, R/W */ 397 #define SREQ_DELAY 0x17 /* BASE+08, IDX+17, B, R/W */ 398 #define SACK_DELAY 0x18 /* BASE+08, IDX+18, B, R/W */ 399 #define SREQ_NOISE_CANCEL 0x19 /* BASE+08, IDX+19, B, R/W */ 400 #define SDP_NOISE_CANCEL 0x1a /* BASE+08, IDX+1a, B, R/W */ 401 #define DELAY_TEST 0x1b /* BASE+08, IDX+1b, B, R/W */ 402 #define SD0_NOISE_CANCEL 0x20 /* BASE+08, IDX+20, B, R/W */ 403 #define SD1_NOISE_CANCEL 0x21 /* BASE+08, IDX+21, B, R/W */ 404 #define SD2_NOISE_CANCEL 0x22 /* BASE+08, IDX+22, B, R/W */ 405 #define SD3_NOISE_CANCEL 0x23 /* BASE+08, IDX+23, B, R/W */ 406 #define SD4_NOISE_CANCEL 0x24 /* BASE+08, IDX+24, B, R/W */ 407 #define SD5_NOISE_CANCEL 0x25 /* BASE+08, IDX+25, B, R/W */ 408 #define SD6_NOISE_CANCEL 0x26 /* BASE+08, IDX+26, B, R/W */ 409 #define SD7_NOISE_CANCEL 0x27 /* BASE+08, IDX+27, B, R/W */ 410 411 412 /* 413 * Useful Bus Monitor status combinations. 414 */ 415 #define BUSMON_BUS_FREE 0 416 #define BUSMON_COMMAND ( BUSMON_BSY | BUSMON_CD | BUSMON_REQ ) 417 #define BUSMON_MESSAGE_IN ( BUSMON_BSY | BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_REQ ) 418 #define BUSMON_MESSAGE_OUT ( BUSMON_BSY | BUSMON_MSG | BUSMON_CD | BUSMON_REQ ) 419 #define BUSMON_DATA_IN ( BUSMON_BSY | BUSMON_IO | BUSMON_REQ ) 420 #define BUSMON_DATA_OUT ( BUSMON_BSY | BUSMON_REQ ) 421 #define BUSMON_STATUS ( BUSMON_BSY | BUSMON_IO | BUSMON_CD | BUSMON_REQ ) 422 #define BUSMON_RESELECT ( BUSMON_IO | BUSMON_SEL) 423 #define BUSMON_PHASE_MASK ( BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_SEL) 424 425 #define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK ) 426 #define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK ) 427 #define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK ) 428 #define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK ) 429 #define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK ) 430 #define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK ) 431 #define BUSPHASE_SELECT ( BUSMON_SEL | BUSMON_IO ) 432 433 434 /************************************************************************ 435 * structure for DMA/Scatter Gather list 436 */ 437 #define NSP32_SG_SIZE SG_ALL 438 439 typedef struct _nsp32_sgtable { 440 /* values must be little endian */ 441 u32_le addr; /* transfer address */ 442 u32_le len; /* transfer length. BIT(31) is for SGT_END mark */ 443 } __attribute__ ((packed)) nsp32_sgtable; 444 445 typedef struct _nsp32_sglun { 446 nsp32_sgtable sgt[NSP32_SG_SIZE+1]; /* SG table */ 447 } __attribute__ ((packed)) nsp32_sglun; 448 #define NSP32_SG_TABLE_SIZE (sizeof(nsp32_sgtable) * NSP32_SG_SIZE * MAX_TARGET * MAX_LUN) 449 450 /* Auto parameter mode memory map. */ 451 /* All values must be little endian. */ 452 typedef struct _nsp32_autoparam { 453 u8 cdb[4 * 0x10]; /* SCSI Command */ 454 u32_le msgout; /* outgoing messages */ 455 u8 syncreg; /* sync register value */ 456 u8 ackwidth; /* ack width register value */ 457 u8 target_id; /* target/host device id */ 458 u8 sample_reg; /* hazard killer sampling rate */ 459 u16_le command_control; /* command control register */ 460 u16_le transfer_control; /* transfer control register */ 461 u32_le sgt_pointer; /* SG table physical address for DMA */ 462 u32_le dummy[2]; 463 } __attribute__ ((packed)) nsp32_autoparam; /* must be packed struct */ 464 465 /* 466 * host data structure 467 */ 468 /* message in/out buffer */ 469 #define MSGOUTBUF_MAX 20 470 #define MSGINBUF_MAX 20 471 472 /* flag for trans_method */ 473 #define NSP32_TRANSFER_BUSMASTER BIT(0) 474 #define NSP32_TRANSFER_MMIO BIT(1) /* Not supported yet */ 475 #define NSP32_TRANSFER_PIO BIT(2) /* Not supported yet */ 476 477 478 /* 479 * structure for connected LUN dynamic data 480 * 481 * Note: Currently tagged queuing is disabled, each nsp32_lunt holds 482 * one SCSI command and one state. 483 */ 484 #define DISCPRIV_OK BIT(0) /* DISCPRIV Enable mode */ 485 #define MSGIN03 BIT(1) /* Auto Msg In 03 Flag */ 486 487 typedef struct _nsp32_lunt { 488 struct scsi_cmnd *SCpnt; /* Current Handling struct scsi_cmnd */ 489 unsigned long save_datp; /* Save Data Pointer - saved position from initial address */ 490 int msgin03; /* auto msg in 03 flag */ 491 unsigned int sg_num; /* Total number of SG entries */ 492 int cur_entry; /* Current SG entry number */ 493 nsp32_sglun *sglun; /* sg table per lun */ 494 dma_addr_t sglun_paddr; /* sglun physical address */ 495 } nsp32_lunt; 496 497 498 /* 499 * SCSI TARGET/LUN definition 500 */ 501 #define NSP32_HOST_SCSIID 7 /* SCSI initiator is every time defined as 7 */ 502 #define MAX_TARGET 8 503 #define MAX_LUN 8 /* XXX: In SPI3, max number of LUN is 64. */ 504 505 506 typedef struct _nsp32_sync_table { 507 unsigned char period_num; /* period number */ 508 unsigned char ackwidth; /* ack width designated by period */ 509 unsigned char start_period; /* search range - start period */ 510 unsigned char end_period; /* search range - end period */ 511 unsigned char sample_rate; /* hazard killer parameter */ 512 } nsp32_sync_table; 513 514 515 /* 516 * structure for target device static data 517 */ 518 /* flag for nsp32_target.sync_flag */ 519 #define SDTR_INITIATOR BIT(0) /* sending SDTR from initiator */ 520 #define SDTR_TARGET BIT(1) /* sending SDTR from target */ 521 #define SDTR_DONE BIT(2) /* exchanging SDTR has been processed */ 522 523 /* syncronous period value for nsp32_target.config_max */ 524 #define FAST5M 0x32 525 #define FAST10M 0x19 526 #define ULTRA20M 0x0c 527 528 /* flag for nsp32_target.{sync_offset}, period */ 529 #define ASYNC_OFFSET 0 /* asynchronous transfer */ 530 #define SYNC_OFFSET 0xf /* synchronous transfer max offset */ 531 532 /* syncreg: 533 bit:07 06 05 04 03 02 01 00 534 ---PERIOD-- ---OFFSET-- */ 535 #define TO_SYNCREG(period, offset) (((period) & 0x0f) << 4 | ((offset) & 0x0f)) 536 537 typedef struct _nsp32_target { 538 unsigned char syncreg; /* value for SYNCREG */ 539 unsigned char ackwidth; /* value for ACKWIDTH */ 540 unsigned char period; /* sync period (0-255) */ 541 unsigned char offset; /* sync offset (0-15) */ 542 int sync_flag; /* SDTR_*, 0 */ 543 int limit_entry; /* max speed limit entry designated 544 by EEPROM configuration */ 545 unsigned char sample_reg; /* SREQ hazard killer register */ 546 } nsp32_target; 547 548 typedef struct _nsp32_hw_data { 549 int IrqNumber; 550 int BaseAddress; 551 int NumAddress; 552 void __iomem *MmioAddress; 553 #define NSP32_MMIO_OFFSET 0x0800 554 unsigned long MmioLength; 555 556 struct scsi_cmnd *CurrentSC; 557 558 struct pci_dev *Pci; 559 const struct pci_device_id *pci_devid; 560 struct Scsi_Host *Host; 561 spinlock_t Lock; 562 563 char info_str[100]; 564 565 /* allocated memory region */ 566 nsp32_sglun *sg_list; /* sglist virtuxal address */ 567 dma_addr_t sg_paddr; /* physical address of hw_sg_table */ 568 nsp32_autoparam *autoparam; /* auto parameter transfer region */ 569 dma_addr_t auto_paddr; /* physical address of autoparam */ 570 int cur_entry; /* current sgt entry */ 571 572 /* target/LUN */ 573 nsp32_lunt *cur_lunt; /* Current connected LUN table */ 574 nsp32_lunt lunt[MAX_TARGET][MAX_LUN]; /* All LUN table */ 575 576 nsp32_target *cur_target; /* Current connected SCSI ID */ 577 nsp32_target target[MAX_TARGET]; /* SCSI ID */ 578 int cur_id; /* Current connected target ID */ 579 int cur_lun; /* Current connected target LUN */ 580 581 /* behavior setting parameters */ 582 int trans_method; /* transfer method flag */ 583 int resettime; /* Reset time */ 584 int clock; /* clock dividing flag */ 585 nsp32_sync_table *synct; /* sync_table determined by clock */ 586 int syncnum; /* the max number of synct element */ 587 588 /* message buffer */ 589 unsigned char msgoutbuf[MSGOUTBUF_MAX]; /* msgout buffer */ 590 char msgout_len; /* msgoutbuf length */ 591 unsigned char msginbuf [MSGINBUF_MAX]; /* megin buffer */ 592 char msgin_len; /* msginbuf length */ 593 594 } nsp32_hw_data; 595 596 /* 597 * TIME definition 598 */ 599 #define RESET_HOLD_TIME 10000 /* reset time in us (SCSI-2 says the 600 minimum is 25us) */ 601 #define SEL_TIMEOUT_TIME 10000 /* 250ms defined in SCSI specification 602 (25.6us/1unit) */ 603 #define ARBIT_TIMEOUT_TIME 100 /* 100us */ 604 #define REQSACK_TIMEOUT_TIME 10000 /* max wait time for REQ/SACK assertion 605 or negation, 10000us == 10ms */ 606 607 #endif /* _NSP32_H */ 608 /* end */ 609