1 /****************************************************************************** 2 ** Device driver for the PCI-SCSI NCR538XX controller family. 3 ** 4 ** Copyright (C) 1994 Wolfgang Stanglmeier 5 ** 6 ** This program is free software; you can redistribute it and/or modify 7 ** it under the terms of the GNU General Public License as published by 8 ** the Free Software Foundation; either version 2 of the License, or 9 ** (at your option) any later version. 10 ** 11 ** This program is distributed in the hope that it will be useful, 12 ** but WITHOUT ANY WARRANTY; without even the implied warranty of 13 ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 ** GNU General Public License for more details. 15 ** 16 ** You should have received a copy of the GNU General Public License 17 ** along with this program; if not, write to the Free Software 18 ** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 19 ** 20 **----------------------------------------------------------------------------- 21 ** 22 ** This driver has been ported to Linux from the FreeBSD NCR53C8XX driver 23 ** and is currently maintained by 24 ** 25 ** Gerard Roudier <groudier@free.fr> 26 ** 27 ** Being given that this driver originates from the FreeBSD version, and 28 ** in order to keep synergy on both, any suggested enhancements and corrections 29 ** received on Linux are automatically a potential candidate for the FreeBSD 30 ** version. 31 ** 32 ** The original driver has been written for 386bsd and FreeBSD by 33 ** Wolfgang Stanglmeier <wolf@cologne.de> 34 ** Stefan Esser <se@mi.Uni-Koeln.de> 35 ** 36 ** And has been ported to NetBSD by 37 ** Charles M. Hannum <mycroft@gnu.ai.mit.edu> 38 ** 39 **----------------------------------------------------------------------------- 40 ** 41 ** Brief history 42 ** 43 ** December 10 1995 by Gerard Roudier: 44 ** Initial port to Linux. 45 ** 46 ** June 23 1996 by Gerard Roudier: 47 ** Support for 64 bits architectures (Alpha). 48 ** 49 ** November 30 1996 by Gerard Roudier: 50 ** Support for Fast-20 scsi. 51 ** Support for large DMA fifo and 128 dwords bursting. 52 ** 53 ** February 27 1997 by Gerard Roudier: 54 ** Support for Fast-40 scsi. 55 ** Support for on-Board RAM. 56 ** 57 ** May 3 1997 by Gerard Roudier: 58 ** Full support for scsi scripts instructions pre-fetching. 59 ** 60 ** May 19 1997 by Richard Waltham <dormouse@farsrobt.demon.co.uk>: 61 ** Support for NvRAM detection and reading. 62 ** 63 ** August 18 1997 by Cort <cort@cs.nmt.edu>: 64 ** Support for Power/PC (Big Endian). 65 ** 66 ** June 20 1998 by Gerard Roudier 67 ** Support for up to 64 tags per lun. 68 ** O(1) everywhere (C and SCRIPTS) for normal cases. 69 ** Low PCI traffic for command handling when on-chip RAM is present. 70 ** Aggressive SCSI SCRIPTS optimizations. 71 ** 72 ** 2005 by Matthew Wilcox and James Bottomley 73 ** PCI-ectomy. This driver now supports only the 720 chip (see the 74 ** NCR_Q720 and zalon drivers for the bus probe logic). 75 ** 76 ******************************************************************************* 77 */ 78 79 /* 80 ** Supported SCSI-II features: 81 ** Synchronous negotiation 82 ** Wide negotiation (depends on the NCR Chip) 83 ** Enable disconnection 84 ** Tagged command queuing 85 ** Parity checking 86 ** Etc... 87 ** 88 ** Supported NCR/SYMBIOS chips: 89 ** 53C720 (Wide, Fast SCSI-2, intfly problems) 90 */ 91 92 /* Name and version of the driver */ 93 #define SCSI_NCR_DRIVER_NAME "ncr53c8xx-3.4.3g" 94 95 #define SCSI_NCR_DEBUG_FLAGS (0) 96 97 #include <linux/blkdev.h> 98 #include <linux/delay.h> 99 #include <linux/dma-mapping.h> 100 #include <linux/errno.h> 101 #include <linux/gfp.h> 102 #include <linux/init.h> 103 #include <linux/interrupt.h> 104 #include <linux/ioport.h> 105 #include <linux/mm.h> 106 #include <linux/module.h> 107 #include <linux/sched.h> 108 #include <linux/signal.h> 109 #include <linux/spinlock.h> 110 #include <linux/stat.h> 111 #include <linux/string.h> 112 #include <linux/time.h> 113 #include <linux/timer.h> 114 #include <linux/types.h> 115 116 #include <asm/dma.h> 117 #include <asm/io.h> 118 119 #include <scsi/scsi.h> 120 #include <scsi/scsi_cmnd.h> 121 #include <scsi/scsi_dbg.h> 122 #include <scsi/scsi_device.h> 123 #include <scsi/scsi_tcq.h> 124 #include <scsi/scsi_transport.h> 125 #include <scsi/scsi_transport_spi.h> 126 127 #include "ncr53c8xx.h" 128 129 #define NAME53C8XX "ncr53c8xx" 130 131 /*========================================================== 132 ** 133 ** Debugging tags 134 ** 135 **========================================================== 136 */ 137 138 #define DEBUG_ALLOC (0x0001) 139 #define DEBUG_PHASE (0x0002) 140 #define DEBUG_QUEUE (0x0008) 141 #define DEBUG_RESULT (0x0010) 142 #define DEBUG_POINTER (0x0020) 143 #define DEBUG_SCRIPT (0x0040) 144 #define DEBUG_TINY (0x0080) 145 #define DEBUG_TIMING (0x0100) 146 #define DEBUG_NEGO (0x0200) 147 #define DEBUG_TAGS (0x0400) 148 #define DEBUG_SCATTER (0x0800) 149 #define DEBUG_IC (0x1000) 150 151 /* 152 ** Enable/Disable debug messages. 153 ** Can be changed at runtime too. 154 */ 155 156 #ifdef SCSI_NCR_DEBUG_INFO_SUPPORT 157 static int ncr_debug = SCSI_NCR_DEBUG_FLAGS; 158 #define DEBUG_FLAGS ncr_debug 159 #else 160 #define DEBUG_FLAGS SCSI_NCR_DEBUG_FLAGS 161 #endif 162 163 static inline struct list_head *ncr_list_pop(struct list_head *head) 164 { 165 if (!list_empty(head)) { 166 struct list_head *elem = head->next; 167 168 list_del(elem); 169 return elem; 170 } 171 172 return NULL; 173 } 174 175 /*========================================================== 176 ** 177 ** Simple power of two buddy-like allocator. 178 ** 179 ** This simple code is not intended to be fast, but to 180 ** provide power of 2 aligned memory allocations. 181 ** Since the SCRIPTS processor only supplies 8 bit 182 ** arithmetic, this allocator allows simple and fast 183 ** address calculations from the SCRIPTS code. 184 ** In addition, cache line alignment is guaranteed for 185 ** power of 2 cache line size. 186 ** Enhanced in linux-2.3.44 to provide a memory pool 187 ** per pcidev to support dynamic dma mapping. (I would 188 ** have preferred a real bus abstraction, btw). 189 ** 190 **========================================================== 191 */ 192 193 #define MEMO_SHIFT 4 /* 16 bytes minimum memory chunk */ 194 #if PAGE_SIZE >= 8192 195 #define MEMO_PAGE_ORDER 0 /* 1 PAGE maximum */ 196 #else 197 #define MEMO_PAGE_ORDER 1 /* 2 PAGES maximum */ 198 #endif 199 #define MEMO_FREE_UNUSED /* Free unused pages immediately */ 200 #define MEMO_WARN 1 201 #define MEMO_GFP_FLAGS GFP_ATOMIC 202 #define MEMO_CLUSTER_SHIFT (PAGE_SHIFT+MEMO_PAGE_ORDER) 203 #define MEMO_CLUSTER_SIZE (1UL << MEMO_CLUSTER_SHIFT) 204 #define MEMO_CLUSTER_MASK (MEMO_CLUSTER_SIZE-1) 205 206 typedef u_long m_addr_t; /* Enough bits to bit-hack addresses */ 207 typedef struct device *m_bush_t; /* Something that addresses DMAable */ 208 209 typedef struct m_link { /* Link between free memory chunks */ 210 struct m_link *next; 211 } m_link_s; 212 213 typedef struct m_vtob { /* Virtual to Bus address translation */ 214 struct m_vtob *next; 215 m_addr_t vaddr; 216 m_addr_t baddr; 217 } m_vtob_s; 218 #define VTOB_HASH_SHIFT 5 219 #define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT) 220 #define VTOB_HASH_MASK (VTOB_HASH_SIZE-1) 221 #define VTOB_HASH_CODE(m) \ 222 ((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK) 223 224 typedef struct m_pool { /* Memory pool of a given kind */ 225 m_bush_t bush; 226 m_addr_t (*getp)(struct m_pool *); 227 void (*freep)(struct m_pool *, m_addr_t); 228 int nump; 229 m_vtob_s *(vtob[VTOB_HASH_SIZE]); 230 struct m_pool *next; 231 struct m_link h[PAGE_SHIFT-MEMO_SHIFT+MEMO_PAGE_ORDER+1]; 232 } m_pool_s; 233 234 static void *___m_alloc(m_pool_s *mp, int size) 235 { 236 int i = 0; 237 int s = (1 << MEMO_SHIFT); 238 int j; 239 m_addr_t a; 240 m_link_s *h = mp->h; 241 242 if (size > (PAGE_SIZE << MEMO_PAGE_ORDER)) 243 return NULL; 244 245 while (size > s) { 246 s <<= 1; 247 ++i; 248 } 249 250 j = i; 251 while (!h[j].next) { 252 if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) { 253 h[j].next = (m_link_s *)mp->getp(mp); 254 if (h[j].next) 255 h[j].next->next = NULL; 256 break; 257 } 258 ++j; 259 s <<= 1; 260 } 261 a = (m_addr_t) h[j].next; 262 if (a) { 263 h[j].next = h[j].next->next; 264 while (j > i) { 265 j -= 1; 266 s >>= 1; 267 h[j].next = (m_link_s *) (a+s); 268 h[j].next->next = NULL; 269 } 270 } 271 #ifdef DEBUG 272 printk("___m_alloc(%d) = %p\n", size, (void *) a); 273 #endif 274 return (void *) a; 275 } 276 277 static void ___m_free(m_pool_s *mp, void *ptr, int size) 278 { 279 int i = 0; 280 int s = (1 << MEMO_SHIFT); 281 m_link_s *q; 282 m_addr_t a, b; 283 m_link_s *h = mp->h; 284 285 #ifdef DEBUG 286 printk("___m_free(%p, %d)\n", ptr, size); 287 #endif 288 289 if (size > (PAGE_SIZE << MEMO_PAGE_ORDER)) 290 return; 291 292 while (size > s) { 293 s <<= 1; 294 ++i; 295 } 296 297 a = (m_addr_t) ptr; 298 299 while (1) { 300 #ifdef MEMO_FREE_UNUSED 301 if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) { 302 mp->freep(mp, a); 303 break; 304 } 305 #endif 306 b = a ^ s; 307 q = &h[i]; 308 while (q->next && q->next != (m_link_s *) b) { 309 q = q->next; 310 } 311 if (!q->next) { 312 ((m_link_s *) a)->next = h[i].next; 313 h[i].next = (m_link_s *) a; 314 break; 315 } 316 q->next = q->next->next; 317 a = a & b; 318 s <<= 1; 319 ++i; 320 } 321 } 322 323 static DEFINE_SPINLOCK(ncr53c8xx_lock); 324 325 static void *__m_calloc2(m_pool_s *mp, int size, char *name, int uflags) 326 { 327 void *p; 328 329 p = ___m_alloc(mp, size); 330 331 if (DEBUG_FLAGS & DEBUG_ALLOC) 332 printk ("new %-10s[%4d] @%p.\n", name, size, p); 333 334 if (p) 335 memset(p, 0, size); 336 else if (uflags & MEMO_WARN) 337 printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size); 338 339 return p; 340 } 341 342 #define __m_calloc(mp, s, n) __m_calloc2(mp, s, n, MEMO_WARN) 343 344 static void __m_free(m_pool_s *mp, void *ptr, int size, char *name) 345 { 346 if (DEBUG_FLAGS & DEBUG_ALLOC) 347 printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr); 348 349 ___m_free(mp, ptr, size); 350 351 } 352 353 /* 354 * With pci bus iommu support, we use a default pool of unmapped memory 355 * for memory we donnot need to DMA from/to and one pool per pcidev for 356 * memory accessed by the PCI chip. `mp0' is the default not DMAable pool. 357 */ 358 359 static m_addr_t ___mp0_getp(m_pool_s *mp) 360 { 361 m_addr_t m = __get_free_pages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER); 362 if (m) 363 ++mp->nump; 364 return m; 365 } 366 367 static void ___mp0_freep(m_pool_s *mp, m_addr_t m) 368 { 369 free_pages(m, MEMO_PAGE_ORDER); 370 --mp->nump; 371 } 372 373 static m_pool_s mp0 = {NULL, ___mp0_getp, ___mp0_freep}; 374 375 /* 376 * DMAable pools. 377 */ 378 379 /* 380 * With pci bus iommu support, we maintain one pool per pcidev and a 381 * hashed reverse table for virtual to bus physical address translations. 382 */ 383 static m_addr_t ___dma_getp(m_pool_s *mp) 384 { 385 m_addr_t vp; 386 m_vtob_s *vbp; 387 388 vbp = __m_calloc(&mp0, sizeof(*vbp), "VTOB"); 389 if (vbp) { 390 dma_addr_t daddr; 391 vp = (m_addr_t) dma_alloc_coherent(mp->bush, 392 PAGE_SIZE<<MEMO_PAGE_ORDER, 393 &daddr, GFP_ATOMIC); 394 if (vp) { 395 int hc = VTOB_HASH_CODE(vp); 396 vbp->vaddr = vp; 397 vbp->baddr = daddr; 398 vbp->next = mp->vtob[hc]; 399 mp->vtob[hc] = vbp; 400 ++mp->nump; 401 return vp; 402 } 403 } 404 if (vbp) 405 __m_free(&mp0, vbp, sizeof(*vbp), "VTOB"); 406 return 0; 407 } 408 409 static void ___dma_freep(m_pool_s *mp, m_addr_t m) 410 { 411 m_vtob_s **vbpp, *vbp; 412 int hc = VTOB_HASH_CODE(m); 413 414 vbpp = &mp->vtob[hc]; 415 while (*vbpp && (*vbpp)->vaddr != m) 416 vbpp = &(*vbpp)->next; 417 if (*vbpp) { 418 vbp = *vbpp; 419 *vbpp = (*vbpp)->next; 420 dma_free_coherent(mp->bush, PAGE_SIZE<<MEMO_PAGE_ORDER, 421 (void *)vbp->vaddr, (dma_addr_t)vbp->baddr); 422 __m_free(&mp0, vbp, sizeof(*vbp), "VTOB"); 423 --mp->nump; 424 } 425 } 426 427 static inline m_pool_s *___get_dma_pool(m_bush_t bush) 428 { 429 m_pool_s *mp; 430 for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next); 431 return mp; 432 } 433 434 static m_pool_s *___cre_dma_pool(m_bush_t bush) 435 { 436 m_pool_s *mp; 437 mp = __m_calloc(&mp0, sizeof(*mp), "MPOOL"); 438 if (mp) { 439 memset(mp, 0, sizeof(*mp)); 440 mp->bush = bush; 441 mp->getp = ___dma_getp; 442 mp->freep = ___dma_freep; 443 mp->next = mp0.next; 444 mp0.next = mp; 445 } 446 return mp; 447 } 448 449 static void ___del_dma_pool(m_pool_s *p) 450 { 451 struct m_pool **pp = &mp0.next; 452 453 while (*pp && *pp != p) 454 pp = &(*pp)->next; 455 if (*pp) { 456 *pp = (*pp)->next; 457 __m_free(&mp0, p, sizeof(*p), "MPOOL"); 458 } 459 } 460 461 static void *__m_calloc_dma(m_bush_t bush, int size, char *name) 462 { 463 u_long flags; 464 struct m_pool *mp; 465 void *m = NULL; 466 467 spin_lock_irqsave(&ncr53c8xx_lock, flags); 468 mp = ___get_dma_pool(bush); 469 if (!mp) 470 mp = ___cre_dma_pool(bush); 471 if (mp) 472 m = __m_calloc(mp, size, name); 473 if (mp && !mp->nump) 474 ___del_dma_pool(mp); 475 spin_unlock_irqrestore(&ncr53c8xx_lock, flags); 476 477 return m; 478 } 479 480 static void __m_free_dma(m_bush_t bush, void *m, int size, char *name) 481 { 482 u_long flags; 483 struct m_pool *mp; 484 485 spin_lock_irqsave(&ncr53c8xx_lock, flags); 486 mp = ___get_dma_pool(bush); 487 if (mp) 488 __m_free(mp, m, size, name); 489 if (mp && !mp->nump) 490 ___del_dma_pool(mp); 491 spin_unlock_irqrestore(&ncr53c8xx_lock, flags); 492 } 493 494 static m_addr_t __vtobus(m_bush_t bush, void *m) 495 { 496 u_long flags; 497 m_pool_s *mp; 498 int hc = VTOB_HASH_CODE(m); 499 m_vtob_s *vp = NULL; 500 m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK; 501 502 spin_lock_irqsave(&ncr53c8xx_lock, flags); 503 mp = ___get_dma_pool(bush); 504 if (mp) { 505 vp = mp->vtob[hc]; 506 while (vp && (m_addr_t) vp->vaddr != a) 507 vp = vp->next; 508 } 509 spin_unlock_irqrestore(&ncr53c8xx_lock, flags); 510 return vp ? vp->baddr + (((m_addr_t) m) - a) : 0; 511 } 512 513 #define _m_calloc_dma(np, s, n) __m_calloc_dma(np->dev, s, n) 514 #define _m_free_dma(np, p, s, n) __m_free_dma(np->dev, p, s, n) 515 #define m_calloc_dma(s, n) _m_calloc_dma(np, s, n) 516 #define m_free_dma(p, s, n) _m_free_dma(np, p, s, n) 517 #define _vtobus(np, p) __vtobus(np->dev, p) 518 #define vtobus(p) _vtobus(np, p) 519 520 /* 521 * Deal with DMA mapping/unmapping. 522 */ 523 524 /* To keep track of the dma mapping (sg/single) that has been set */ 525 #define __data_mapped SCp.phase 526 #define __data_mapping SCp.have_data_in 527 528 static void __unmap_scsi_data(struct device *dev, struct scsi_cmnd *cmd) 529 { 530 switch(cmd->__data_mapped) { 531 case 2: 532 scsi_dma_unmap(cmd); 533 break; 534 } 535 cmd->__data_mapped = 0; 536 } 537 538 static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd) 539 { 540 int use_sg; 541 542 use_sg = scsi_dma_map(cmd); 543 if (!use_sg) 544 return 0; 545 546 cmd->__data_mapped = 2; 547 cmd->__data_mapping = use_sg; 548 549 return use_sg; 550 } 551 552 #define unmap_scsi_data(np, cmd) __unmap_scsi_data(np->dev, cmd) 553 #define map_scsi_sg_data(np, cmd) __map_scsi_sg_data(np->dev, cmd) 554 555 /*========================================================== 556 ** 557 ** Driver setup. 558 ** 559 ** This structure is initialized from linux config 560 ** options. It can be overridden at boot-up by the boot 561 ** command line. 562 ** 563 **========================================================== 564 */ 565 static struct ncr_driver_setup 566 driver_setup = SCSI_NCR_DRIVER_SETUP; 567 568 #ifndef MODULE 569 #ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT 570 static struct ncr_driver_setup 571 driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP; 572 #endif 573 #endif /* !MODULE */ 574 575 #define initverbose (driver_setup.verbose) 576 #define bootverbose (np->verbose) 577 578 579 /*=================================================================== 580 ** 581 ** Driver setup from the boot command line 582 ** 583 **=================================================================== 584 */ 585 586 #ifdef MODULE 587 #define ARG_SEP ' ' 588 #else 589 #define ARG_SEP ',' 590 #endif 591 592 #define OPT_TAGS 1 593 #define OPT_MASTER_PARITY 2 594 #define OPT_SCSI_PARITY 3 595 #define OPT_DISCONNECTION 4 596 #define OPT_SPECIAL_FEATURES 5 597 #define OPT_UNUSED_1 6 598 #define OPT_FORCE_SYNC_NEGO 7 599 #define OPT_REVERSE_PROBE 8 600 #define OPT_DEFAULT_SYNC 9 601 #define OPT_VERBOSE 10 602 #define OPT_DEBUG 11 603 #define OPT_BURST_MAX 12 604 #define OPT_LED_PIN 13 605 #define OPT_MAX_WIDE 14 606 #define OPT_SETTLE_DELAY 15 607 #define OPT_DIFF_SUPPORT 16 608 #define OPT_IRQM 17 609 #define OPT_PCI_FIX_UP 18 610 #define OPT_BUS_CHECK 19 611 #define OPT_OPTIMIZE 20 612 #define OPT_RECOVERY 21 613 #define OPT_SAFE_SETUP 22 614 #define OPT_USE_NVRAM 23 615 #define OPT_EXCLUDE 24 616 #define OPT_HOST_ID 25 617 618 #ifdef SCSI_NCR_IARB_SUPPORT 619 #define OPT_IARB 26 620 #endif 621 622 #ifdef MODULE 623 #define ARG_SEP ' ' 624 #else 625 #define ARG_SEP ',' 626 #endif 627 628 #ifndef MODULE 629 static char setup_token[] __initdata = 630 "tags:" "mpar:" 631 "spar:" "disc:" 632 "specf:" "ultra:" 633 "fsn:" "revprob:" 634 "sync:" "verb:" 635 "debug:" "burst:" 636 "led:" "wide:" 637 "settle:" "diff:" 638 "irqm:" "pcifix:" 639 "buschk:" "optim:" 640 "recovery:" 641 "safe:" "nvram:" 642 "excl:" "hostid:" 643 #ifdef SCSI_NCR_IARB_SUPPORT 644 "iarb:" 645 #endif 646 ; /* DONNOT REMOVE THIS ';' */ 647 648 static int __init get_setup_token(char *p) 649 { 650 char *cur = setup_token; 651 char *pc; 652 int i = 0; 653 654 while (cur != NULL && (pc = strchr(cur, ':')) != NULL) { 655 ++pc; 656 ++i; 657 if (!strncmp(p, cur, pc - cur)) 658 return i; 659 cur = pc; 660 } 661 return 0; 662 } 663 664 static int __init sym53c8xx__setup(char *str) 665 { 666 #ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT 667 char *cur = str; 668 char *pc, *pv; 669 int i, val, c; 670 int xi = 0; 671 672 while (cur != NULL && (pc = strchr(cur, ':')) != NULL) { 673 char *pe; 674 675 val = 0; 676 pv = pc; 677 c = *++pv; 678 679 if (c == 'n') 680 val = 0; 681 else if (c == 'y') 682 val = 1; 683 else 684 val = (int) simple_strtoul(pv, &pe, 0); 685 686 switch (get_setup_token(cur)) { 687 case OPT_TAGS: 688 driver_setup.default_tags = val; 689 if (pe && *pe == '/') { 690 i = 0; 691 while (*pe && *pe != ARG_SEP && 692 i < sizeof(driver_setup.tag_ctrl)-1) { 693 driver_setup.tag_ctrl[i++] = *pe++; 694 } 695 driver_setup.tag_ctrl[i] = '\0'; 696 } 697 break; 698 case OPT_MASTER_PARITY: 699 driver_setup.master_parity = val; 700 break; 701 case OPT_SCSI_PARITY: 702 driver_setup.scsi_parity = val; 703 break; 704 case OPT_DISCONNECTION: 705 driver_setup.disconnection = val; 706 break; 707 case OPT_SPECIAL_FEATURES: 708 driver_setup.special_features = val; 709 break; 710 case OPT_FORCE_SYNC_NEGO: 711 driver_setup.force_sync_nego = val; 712 break; 713 case OPT_REVERSE_PROBE: 714 driver_setup.reverse_probe = val; 715 break; 716 case OPT_DEFAULT_SYNC: 717 driver_setup.default_sync = val; 718 break; 719 case OPT_VERBOSE: 720 driver_setup.verbose = val; 721 break; 722 case OPT_DEBUG: 723 driver_setup.debug = val; 724 break; 725 case OPT_BURST_MAX: 726 driver_setup.burst_max = val; 727 break; 728 case OPT_LED_PIN: 729 driver_setup.led_pin = val; 730 break; 731 case OPT_MAX_WIDE: 732 driver_setup.max_wide = val? 1:0; 733 break; 734 case OPT_SETTLE_DELAY: 735 driver_setup.settle_delay = val; 736 break; 737 case OPT_DIFF_SUPPORT: 738 driver_setup.diff_support = val; 739 break; 740 case OPT_IRQM: 741 driver_setup.irqm = val; 742 break; 743 case OPT_PCI_FIX_UP: 744 driver_setup.pci_fix_up = val; 745 break; 746 case OPT_BUS_CHECK: 747 driver_setup.bus_check = val; 748 break; 749 case OPT_OPTIMIZE: 750 driver_setup.optimize = val; 751 break; 752 case OPT_RECOVERY: 753 driver_setup.recovery = val; 754 break; 755 case OPT_USE_NVRAM: 756 driver_setup.use_nvram = val; 757 break; 758 case OPT_SAFE_SETUP: 759 memcpy(&driver_setup, &driver_safe_setup, 760 sizeof(driver_setup)); 761 break; 762 case OPT_EXCLUDE: 763 if (xi < SCSI_NCR_MAX_EXCLUDES) 764 driver_setup.excludes[xi++] = val; 765 break; 766 case OPT_HOST_ID: 767 driver_setup.host_id = val; 768 break; 769 #ifdef SCSI_NCR_IARB_SUPPORT 770 case OPT_IARB: 771 driver_setup.iarb = val; 772 break; 773 #endif 774 default: 775 printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur); 776 break; 777 } 778 779 if ((cur = strchr(cur, ARG_SEP)) != NULL) 780 ++cur; 781 } 782 #endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */ 783 return 1; 784 } 785 #endif /* !MODULE */ 786 787 /*=================================================================== 788 ** 789 ** Get device queue depth from boot command line. 790 ** 791 **=================================================================== 792 */ 793 #define DEF_DEPTH (driver_setup.default_tags) 794 #define ALL_TARGETS -2 795 #define NO_TARGET -1 796 #define ALL_LUNS -2 797 #define NO_LUN -1 798 799 static int device_queue_depth(int unit, int target, int lun) 800 { 801 int c, h, t, u, v; 802 char *p = driver_setup.tag_ctrl; 803 char *ep; 804 805 h = -1; 806 t = NO_TARGET; 807 u = NO_LUN; 808 while ((c = *p++) != 0) { 809 v = simple_strtoul(p, &ep, 0); 810 switch(c) { 811 case '/': 812 ++h; 813 t = ALL_TARGETS; 814 u = ALL_LUNS; 815 break; 816 case 't': 817 if (t != target) 818 t = (target == v) ? v : NO_TARGET; 819 u = ALL_LUNS; 820 break; 821 case 'u': 822 if (u != lun) 823 u = (lun == v) ? v : NO_LUN; 824 break; 825 case 'q': 826 if (h == unit && 827 (t == ALL_TARGETS || t == target) && 828 (u == ALL_LUNS || u == lun)) 829 return v; 830 break; 831 case '-': 832 t = ALL_TARGETS; 833 u = ALL_LUNS; 834 break; 835 default: 836 break; 837 } 838 p = ep; 839 } 840 return DEF_DEPTH; 841 } 842 843 844 /*========================================================== 845 ** 846 ** The CCB done queue uses an array of CCB virtual 847 ** addresses. Empty entries are flagged using the bogus 848 ** virtual address 0xffffffff. 849 ** 850 ** Since PCI ensures that only aligned DWORDs are accessed 851 ** atomically, 64 bit little-endian architecture requires 852 ** to test the high order DWORD of the entry to determine 853 ** if it is empty or valid. 854 ** 855 ** BTW, I will make things differently as soon as I will 856 ** have a better idea, but this is simple and should work. 857 ** 858 **========================================================== 859 */ 860 861 #define SCSI_NCR_CCB_DONE_SUPPORT 862 #ifdef SCSI_NCR_CCB_DONE_SUPPORT 863 864 #define MAX_DONE 24 865 #define CCB_DONE_EMPTY 0xffffffffUL 866 867 /* All 32 bit architectures */ 868 #if BITS_PER_LONG == 32 869 #define CCB_DONE_VALID(cp) (((u_long) cp) != CCB_DONE_EMPTY) 870 871 /* All > 32 bit (64 bit) architectures regardless endian-ness */ 872 #else 873 #define CCB_DONE_VALID(cp) \ 874 ((((u_long) cp) & 0xffffffff00000000ul) && \ 875 (((u_long) cp) & 0xfffffffful) != CCB_DONE_EMPTY) 876 #endif 877 878 #endif /* SCSI_NCR_CCB_DONE_SUPPORT */ 879 880 /*========================================================== 881 ** 882 ** Configuration and Debugging 883 ** 884 **========================================================== 885 */ 886 887 /* 888 ** SCSI address of this device. 889 ** The boot routines should have set it. 890 ** If not, use this. 891 */ 892 893 #ifndef SCSI_NCR_MYADDR 894 #define SCSI_NCR_MYADDR (7) 895 #endif 896 897 /* 898 ** The maximum number of tags per logic unit. 899 ** Used only for disk devices that support tags. 900 */ 901 902 #ifndef SCSI_NCR_MAX_TAGS 903 #define SCSI_NCR_MAX_TAGS (8) 904 #endif 905 906 /* 907 ** TAGS are actually limited to 64 tags/lun. 908 ** We need to deal with power of 2, for alignment constraints. 909 */ 910 #if SCSI_NCR_MAX_TAGS > 64 911 #define MAX_TAGS (64) 912 #else 913 #define MAX_TAGS SCSI_NCR_MAX_TAGS 914 #endif 915 916 #define NO_TAG (255) 917 918 /* 919 ** Choose appropriate type for tag bitmap. 920 */ 921 #if MAX_TAGS > 32 922 typedef u64 tagmap_t; 923 #else 924 typedef u32 tagmap_t; 925 #endif 926 927 /* 928 ** Number of targets supported by the driver. 929 ** n permits target numbers 0..n-1. 930 ** Default is 16, meaning targets #0..#15. 931 ** #7 .. is myself. 932 */ 933 934 #ifdef SCSI_NCR_MAX_TARGET 935 #define MAX_TARGET (SCSI_NCR_MAX_TARGET) 936 #else 937 #define MAX_TARGET (16) 938 #endif 939 940 /* 941 ** Number of logic units supported by the driver. 942 ** n enables logic unit numbers 0..n-1. 943 ** The common SCSI devices require only 944 ** one lun, so take 1 as the default. 945 */ 946 947 #ifdef SCSI_NCR_MAX_LUN 948 #define MAX_LUN SCSI_NCR_MAX_LUN 949 #else 950 #define MAX_LUN (1) 951 #endif 952 953 /* 954 ** Asynchronous pre-scaler (ns). Shall be 40 955 */ 956 957 #ifndef SCSI_NCR_MIN_ASYNC 958 #define SCSI_NCR_MIN_ASYNC (40) 959 #endif 960 961 /* 962 ** The maximum number of jobs scheduled for starting. 963 ** There should be one slot per target, and one slot 964 ** for each tag of each target in use. 965 ** The calculation below is actually quite silly ... 966 */ 967 968 #ifdef SCSI_NCR_CAN_QUEUE 969 #define MAX_START (SCSI_NCR_CAN_QUEUE + 4) 970 #else 971 #define MAX_START (MAX_TARGET + 7 * MAX_TAGS) 972 #endif 973 974 /* 975 ** We limit the max number of pending IO to 250. 976 ** since we donnot want to allocate more than 1 977 ** PAGE for 'scripth'. 978 */ 979 #if MAX_START > 250 980 #undef MAX_START 981 #define MAX_START 250 982 #endif 983 984 /* 985 ** The maximum number of segments a transfer is split into. 986 ** We support up to 127 segments for both read and write. 987 ** The data scripts are broken into 2 sub-scripts. 988 ** 80 (MAX_SCATTERL) segments are moved from a sub-script 989 ** in on-chip RAM. This makes data transfers shorter than 990 ** 80k (assuming 1k fs) as fast as possible. 991 */ 992 993 #define MAX_SCATTER (SCSI_NCR_MAX_SCATTER) 994 995 #if (MAX_SCATTER > 80) 996 #define MAX_SCATTERL 80 997 #define MAX_SCATTERH (MAX_SCATTER - MAX_SCATTERL) 998 #else 999 #define MAX_SCATTERL (MAX_SCATTER-1) 1000 #define MAX_SCATTERH 1 1001 #endif 1002 1003 /* 1004 ** other 1005 */ 1006 1007 #define NCR_SNOOP_TIMEOUT (1000000) 1008 1009 /* 1010 ** Other definitions 1011 */ 1012 1013 #define ScsiResult(host_code, scsi_code) (((host_code) << 16) + ((scsi_code) & 0x7f)) 1014 1015 #define initverbose (driver_setup.verbose) 1016 #define bootverbose (np->verbose) 1017 1018 /*========================================================== 1019 ** 1020 ** Command control block states. 1021 ** 1022 **========================================================== 1023 */ 1024 1025 #define HS_IDLE (0) 1026 #define HS_BUSY (1) 1027 #define HS_NEGOTIATE (2) /* sync/wide data transfer*/ 1028 #define HS_DISCONNECT (3) /* Disconnected by target */ 1029 1030 #define HS_DONEMASK (0x80) 1031 #define HS_COMPLETE (4|HS_DONEMASK) 1032 #define HS_SEL_TIMEOUT (5|HS_DONEMASK) /* Selection timeout */ 1033 #define HS_RESET (6|HS_DONEMASK) /* SCSI reset */ 1034 #define HS_ABORTED (7|HS_DONEMASK) /* Transfer aborted */ 1035 #define HS_TIMEOUT (8|HS_DONEMASK) /* Software timeout */ 1036 #define HS_FAIL (9|HS_DONEMASK) /* SCSI or PCI bus errors */ 1037 #define HS_UNEXPECTED (10|HS_DONEMASK)/* Unexpected disconnect */ 1038 1039 /* 1040 ** Invalid host status values used by the SCRIPTS processor 1041 ** when the nexus is not fully identified. 1042 ** Shall never appear in a CCB. 1043 */ 1044 1045 #define HS_INVALMASK (0x40) 1046 #define HS_SELECTING (0|HS_INVALMASK) 1047 #define HS_IN_RESELECT (1|HS_INVALMASK) 1048 #define HS_STARTING (2|HS_INVALMASK) 1049 1050 /* 1051 ** Flags set by the SCRIPT processor for commands 1052 ** that have been skipped. 1053 */ 1054 #define HS_SKIPMASK (0x20) 1055 1056 /*========================================================== 1057 ** 1058 ** Software Interrupt Codes 1059 ** 1060 **========================================================== 1061 */ 1062 1063 #define SIR_BAD_STATUS (1) 1064 #define SIR_XXXXXXXXXX (2) 1065 #define SIR_NEGO_SYNC (3) 1066 #define SIR_NEGO_WIDE (4) 1067 #define SIR_NEGO_FAILED (5) 1068 #define SIR_NEGO_PROTO (6) 1069 #define SIR_REJECT_RECEIVED (7) 1070 #define SIR_REJECT_SENT (8) 1071 #define SIR_IGN_RESIDUE (9) 1072 #define SIR_MISSING_SAVE (10) 1073 #define SIR_RESEL_NO_MSG_IN (11) 1074 #define SIR_RESEL_NO_IDENTIFY (12) 1075 #define SIR_RESEL_BAD_LUN (13) 1076 #define SIR_RESEL_BAD_TARGET (14) 1077 #define SIR_RESEL_BAD_I_T_L (15) 1078 #define SIR_RESEL_BAD_I_T_L_Q (16) 1079 #define SIR_DONE_OVERFLOW (17) 1080 #define SIR_INTFLY (18) 1081 #define SIR_MAX (18) 1082 1083 /*========================================================== 1084 ** 1085 ** Extended error codes. 1086 ** xerr_status field of struct ccb. 1087 ** 1088 **========================================================== 1089 */ 1090 1091 #define XE_OK (0) 1092 #define XE_EXTRA_DATA (1) /* unexpected data phase */ 1093 #define XE_BAD_PHASE (2) /* illegal phase (4/5) */ 1094 1095 /*========================================================== 1096 ** 1097 ** Negotiation status. 1098 ** nego_status field of struct ccb. 1099 ** 1100 **========================================================== 1101 */ 1102 1103 #define NS_NOCHANGE (0) 1104 #define NS_SYNC (1) 1105 #define NS_WIDE (2) 1106 #define NS_PPR (4) 1107 1108 /*========================================================== 1109 ** 1110 ** Misc. 1111 ** 1112 **========================================================== 1113 */ 1114 1115 #define CCB_MAGIC (0xf2691ad2) 1116 1117 /*========================================================== 1118 ** 1119 ** Declaration of structs. 1120 ** 1121 **========================================================== 1122 */ 1123 1124 static struct scsi_transport_template *ncr53c8xx_transport_template = NULL; 1125 1126 struct tcb; 1127 struct lcb; 1128 struct ccb; 1129 struct ncb; 1130 struct script; 1131 1132 struct link { 1133 ncrcmd l_cmd; 1134 ncrcmd l_paddr; 1135 }; 1136 1137 struct usrcmd { 1138 u_long target; 1139 u_long lun; 1140 u_long data; 1141 u_long cmd; 1142 }; 1143 1144 #define UC_SETSYNC 10 1145 #define UC_SETTAGS 11 1146 #define UC_SETDEBUG 12 1147 #define UC_SETORDER 13 1148 #define UC_SETWIDE 14 1149 #define UC_SETFLAG 15 1150 #define UC_SETVERBOSE 17 1151 1152 #define UF_TRACE (0x01) 1153 #define UF_NODISC (0x02) 1154 #define UF_NOSCAN (0x04) 1155 1156 /*======================================================================== 1157 ** 1158 ** Declaration of structs: target control block 1159 ** 1160 **======================================================================== 1161 */ 1162 struct tcb { 1163 /*---------------------------------------------------------------- 1164 ** During reselection the ncr jumps to this point with SFBR 1165 ** set to the encoded target number with bit 7 set. 1166 ** if it's not this target, jump to the next. 1167 ** 1168 ** JUMP IF (SFBR != #target#), @(next tcb) 1169 **---------------------------------------------------------------- 1170 */ 1171 struct link jump_tcb; 1172 1173 /*---------------------------------------------------------------- 1174 ** Load the actual values for the sxfer and the scntl3 1175 ** register (sync/wide mode). 1176 ** 1177 ** SCR_COPY (1), @(sval field of this tcb), @(sxfer register) 1178 ** SCR_COPY (1), @(wval field of this tcb), @(scntl3 register) 1179 **---------------------------------------------------------------- 1180 */ 1181 ncrcmd getscr[6]; 1182 1183 /*---------------------------------------------------------------- 1184 ** Get the IDENTIFY message and load the LUN to SFBR. 1185 ** 1186 ** CALL, <RESEL_LUN> 1187 **---------------------------------------------------------------- 1188 */ 1189 struct link call_lun; 1190 1191 /*---------------------------------------------------------------- 1192 ** Now look for the right lun. 1193 ** 1194 ** For i = 0 to 3 1195 ** SCR_JUMP ^ IFTRUE(MASK(i, 3)), @(first lcb mod. i) 1196 ** 1197 ** Recent chips will prefetch the 4 JUMPS using only 1 burst. 1198 ** It is kind of hashcoding. 1199 **---------------------------------------------------------------- 1200 */ 1201 struct link jump_lcb[4]; /* JUMPs for reselection */ 1202 struct lcb * lp[MAX_LUN]; /* The lcb's of this tcb */ 1203 1204 /*---------------------------------------------------------------- 1205 ** Pointer to the ccb used for negotiation. 1206 ** Prevent from starting a negotiation for all queued commands 1207 ** when tagged command queuing is enabled. 1208 **---------------------------------------------------------------- 1209 */ 1210 struct ccb * nego_cp; 1211 1212 /*---------------------------------------------------------------- 1213 ** statistical data 1214 **---------------------------------------------------------------- 1215 */ 1216 u_long transfers; 1217 u_long bytes; 1218 1219 /*---------------------------------------------------------------- 1220 ** negotiation of wide and synch transfer and device quirks. 1221 **---------------------------------------------------------------- 1222 */ 1223 #ifdef SCSI_NCR_BIG_ENDIAN 1224 /*0*/ u16 period; 1225 /*2*/ u_char sval; 1226 /*3*/ u_char minsync; 1227 /*0*/ u_char wval; 1228 /*1*/ u_char widedone; 1229 /*2*/ u_char quirks; 1230 /*3*/ u_char maxoffs; 1231 #else 1232 /*0*/ u_char minsync; 1233 /*1*/ u_char sval; 1234 /*2*/ u16 period; 1235 /*0*/ u_char maxoffs; 1236 /*1*/ u_char quirks; 1237 /*2*/ u_char widedone; 1238 /*3*/ u_char wval; 1239 #endif 1240 1241 /* User settable limits and options. */ 1242 u_char usrsync; 1243 u_char usrwide; 1244 u_char usrtags; 1245 u_char usrflag; 1246 struct scsi_target *starget; 1247 }; 1248 1249 /*======================================================================== 1250 ** 1251 ** Declaration of structs: lun control block 1252 ** 1253 **======================================================================== 1254 */ 1255 struct lcb { 1256 /*---------------------------------------------------------------- 1257 ** During reselection the ncr jumps to this point 1258 ** with SFBR set to the "Identify" message. 1259 ** if it's not this lun, jump to the next. 1260 ** 1261 ** JUMP IF (SFBR != #lun#), @(next lcb of this target) 1262 ** 1263 ** It is this lun. Load TEMP with the nexus jumps table 1264 ** address and jump to RESEL_TAG (or RESEL_NOTAG). 1265 ** 1266 ** SCR_COPY (4), p_jump_ccb, TEMP, 1267 ** SCR_JUMP, <RESEL_TAG> 1268 **---------------------------------------------------------------- 1269 */ 1270 struct link jump_lcb; 1271 ncrcmd load_jump_ccb[3]; 1272 struct link jump_tag; 1273 ncrcmd p_jump_ccb; /* Jump table bus address */ 1274 1275 /*---------------------------------------------------------------- 1276 ** Jump table used by the script processor to directly jump 1277 ** to the CCB corresponding to the reselected nexus. 1278 ** Address is allocated on 256 bytes boundary in order to 1279 ** allow 8 bit calculation of the tag jump entry for up to 1280 ** 64 possible tags. 1281 **---------------------------------------------------------------- 1282 */ 1283 u32 jump_ccb_0; /* Default table if no tags */ 1284 u32 *jump_ccb; /* Virtual address */ 1285 1286 /*---------------------------------------------------------------- 1287 ** CCB queue management. 1288 **---------------------------------------------------------------- 1289 */ 1290 struct list_head free_ccbq; /* Queue of available CCBs */ 1291 struct list_head busy_ccbq; /* Queue of busy CCBs */ 1292 struct list_head wait_ccbq; /* Queue of waiting for IO CCBs */ 1293 struct list_head skip_ccbq; /* Queue of skipped CCBs */ 1294 u_char actccbs; /* Number of allocated CCBs */ 1295 u_char busyccbs; /* CCBs busy for this lun */ 1296 u_char queuedccbs; /* CCBs queued to the controller*/ 1297 u_char queuedepth; /* Queue depth for this lun */ 1298 u_char scdev_depth; /* SCSI device queue depth */ 1299 u_char maxnxs; /* Max possible nexuses */ 1300 1301 /*---------------------------------------------------------------- 1302 ** Control of tagged command queuing. 1303 ** Tags allocation is performed using a circular buffer. 1304 ** This avoids using a loop for tag allocation. 1305 **---------------------------------------------------------------- 1306 */ 1307 u_char ia_tag; /* Allocation index */ 1308 u_char if_tag; /* Freeing index */ 1309 u_char cb_tags[MAX_TAGS]; /* Circular tags buffer */ 1310 u_char usetags; /* Command queuing is active */ 1311 u_char maxtags; /* Max nr of tags asked by user */ 1312 u_char numtags; /* Current number of tags */ 1313 1314 /*---------------------------------------------------------------- 1315 ** QUEUE FULL control and ORDERED tag control. 1316 **---------------------------------------------------------------- 1317 */ 1318 /*---------------------------------------------------------------- 1319 ** QUEUE FULL and ORDERED tag control. 1320 **---------------------------------------------------------------- 1321 */ 1322 u16 num_good; /* Nr of GOOD since QUEUE FULL */ 1323 tagmap_t tags_umap; /* Used tags bitmap */ 1324 tagmap_t tags_smap; /* Tags in use at 'tag_stime' */ 1325 u_long tags_stime; /* Last time we set smap=umap */ 1326 struct ccb * held_ccb; /* CCB held for QUEUE FULL */ 1327 }; 1328 1329 /*======================================================================== 1330 ** 1331 ** Declaration of structs: the launch script. 1332 ** 1333 **======================================================================== 1334 ** 1335 ** It is part of the CCB and is called by the scripts processor to 1336 ** start or restart the data structure (nexus). 1337 ** This 6 DWORDs mini script makes use of prefetching. 1338 ** 1339 **------------------------------------------------------------------------ 1340 */ 1341 struct launch { 1342 /*---------------------------------------------------------------- 1343 ** SCR_COPY(4), @(p_phys), @(dsa register) 1344 ** SCR_JUMP, @(scheduler_point) 1345 **---------------------------------------------------------------- 1346 */ 1347 ncrcmd setup_dsa[3]; /* Copy 'phys' address to dsa */ 1348 struct link schedule; /* Jump to scheduler point */ 1349 ncrcmd p_phys; /* 'phys' header bus address */ 1350 }; 1351 1352 /*======================================================================== 1353 ** 1354 ** Declaration of structs: global HEADER. 1355 ** 1356 **======================================================================== 1357 ** 1358 ** This substructure is copied from the ccb to a global address after 1359 ** selection (or reselection) and copied back before disconnect. 1360 ** 1361 ** These fields are accessible to the script processor. 1362 ** 1363 **------------------------------------------------------------------------ 1364 */ 1365 1366 struct head { 1367 /*---------------------------------------------------------------- 1368 ** Saved data pointer. 1369 ** Points to the position in the script responsible for the 1370 ** actual transfer transfer of data. 1371 ** It's written after reception of a SAVE_DATA_POINTER message. 1372 ** The goalpointer points after the last transfer command. 1373 **---------------------------------------------------------------- 1374 */ 1375 u32 savep; 1376 u32 lastp; 1377 u32 goalp; 1378 1379 /*---------------------------------------------------------------- 1380 ** Alternate data pointer. 1381 ** They are copied back to savep/lastp/goalp by the SCRIPTS 1382 ** when the direction is unknown and the device claims data out. 1383 **---------------------------------------------------------------- 1384 */ 1385 u32 wlastp; 1386 u32 wgoalp; 1387 1388 /*---------------------------------------------------------------- 1389 ** The virtual address of the ccb containing this header. 1390 **---------------------------------------------------------------- 1391 */ 1392 struct ccb * cp; 1393 1394 /*---------------------------------------------------------------- 1395 ** Status fields. 1396 **---------------------------------------------------------------- 1397 */ 1398 u_char scr_st[4]; /* script status */ 1399 u_char status[4]; /* host status. must be the */ 1400 /* last DWORD of the header. */ 1401 }; 1402 1403 /* 1404 ** The status bytes are used by the host and the script processor. 1405 ** 1406 ** The byte corresponding to the host_status must be stored in the 1407 ** last DWORD of the CCB header since it is used for command 1408 ** completion (ncr_wakeup()). Doing so, we are sure that the header 1409 ** has been entirely copied back to the CCB when the host_status is 1410 ** seen complete by the CPU. 1411 ** 1412 ** The last four bytes (status[4]) are copied to the scratchb register 1413 ** (declared as scr0..scr3 in ncr_reg.h) just after the select/reselect, 1414 ** and copied back just after disconnecting. 1415 ** Inside the script the XX_REG are used. 1416 ** 1417 ** The first four bytes (scr_st[4]) are used inside the script by 1418 ** "COPY" commands. 1419 ** Because source and destination must have the same alignment 1420 ** in a DWORD, the fields HAVE to be at the chosen offsets. 1421 ** xerr_st 0 (0x34) scratcha 1422 ** sync_st 1 (0x05) sxfer 1423 ** wide_st 3 (0x03) scntl3 1424 */ 1425 1426 /* 1427 ** Last four bytes (script) 1428 */ 1429 #define QU_REG scr0 1430 #define HS_REG scr1 1431 #define HS_PRT nc_scr1 1432 #define SS_REG scr2 1433 #define SS_PRT nc_scr2 1434 #define PS_REG scr3 1435 1436 /* 1437 ** Last four bytes (host) 1438 */ 1439 #ifdef SCSI_NCR_BIG_ENDIAN 1440 #define actualquirks phys.header.status[3] 1441 #define host_status phys.header.status[2] 1442 #define scsi_status phys.header.status[1] 1443 #define parity_status phys.header.status[0] 1444 #else 1445 #define actualquirks phys.header.status[0] 1446 #define host_status phys.header.status[1] 1447 #define scsi_status phys.header.status[2] 1448 #define parity_status phys.header.status[3] 1449 #endif 1450 1451 /* 1452 ** First four bytes (script) 1453 */ 1454 #define xerr_st header.scr_st[0] 1455 #define sync_st header.scr_st[1] 1456 #define nego_st header.scr_st[2] 1457 #define wide_st header.scr_st[3] 1458 1459 /* 1460 ** First four bytes (host) 1461 */ 1462 #define xerr_status phys.xerr_st 1463 #define nego_status phys.nego_st 1464 1465 #if 0 1466 #define sync_status phys.sync_st 1467 #define wide_status phys.wide_st 1468 #endif 1469 1470 /*========================================================== 1471 ** 1472 ** Declaration of structs: Data structure block 1473 ** 1474 **========================================================== 1475 ** 1476 ** During execution of a ccb by the script processor, 1477 ** the DSA (data structure address) register points 1478 ** to this substructure of the ccb. 1479 ** This substructure contains the header with 1480 ** the script-processor-changeable data and 1481 ** data blocks for the indirect move commands. 1482 ** 1483 **---------------------------------------------------------- 1484 */ 1485 1486 struct dsb { 1487 1488 /* 1489 ** Header. 1490 */ 1491 1492 struct head header; 1493 1494 /* 1495 ** Table data for Script 1496 */ 1497 1498 struct scr_tblsel select; 1499 struct scr_tblmove smsg ; 1500 struct scr_tblmove cmd ; 1501 struct scr_tblmove sense ; 1502 struct scr_tblmove data[MAX_SCATTER]; 1503 }; 1504 1505 1506 /*======================================================================== 1507 ** 1508 ** Declaration of structs: Command control block. 1509 ** 1510 **======================================================================== 1511 */ 1512 struct ccb { 1513 /*---------------------------------------------------------------- 1514 ** This is the data structure which is pointed by the DSA 1515 ** register when it is executed by the script processor. 1516 ** It must be the first entry because it contains the header 1517 ** as first entry that must be cache line aligned. 1518 **---------------------------------------------------------------- 1519 */ 1520 struct dsb phys; 1521 1522 /*---------------------------------------------------------------- 1523 ** Mini-script used at CCB execution start-up. 1524 ** Load the DSA with the data structure address (phys) and 1525 ** jump to SELECT. Jump to CANCEL if CCB is to be canceled. 1526 **---------------------------------------------------------------- 1527 */ 1528 struct launch start; 1529 1530 /*---------------------------------------------------------------- 1531 ** Mini-script used at CCB relection to restart the nexus. 1532 ** Load the DSA with the data structure address (phys) and 1533 ** jump to RESEL_DSA. Jump to ABORT if CCB is to be aborted. 1534 **---------------------------------------------------------------- 1535 */ 1536 struct launch restart; 1537 1538 /*---------------------------------------------------------------- 1539 ** If a data transfer phase is terminated too early 1540 ** (after reception of a message (i.e. DISCONNECT)), 1541 ** we have to prepare a mini script to transfer 1542 ** the rest of the data. 1543 **---------------------------------------------------------------- 1544 */ 1545 ncrcmd patch[8]; 1546 1547 /*---------------------------------------------------------------- 1548 ** The general SCSI driver provides a 1549 ** pointer to a control block. 1550 **---------------------------------------------------------------- 1551 */ 1552 struct scsi_cmnd *cmd; /* SCSI command */ 1553 u_char cdb_buf[16]; /* Copy of CDB */ 1554 u_char sense_buf[64]; 1555 int data_len; /* Total data length */ 1556 1557 /*---------------------------------------------------------------- 1558 ** Message areas. 1559 ** We prepare a message to be sent after selection. 1560 ** We may use a second one if the command is rescheduled 1561 ** due to GETCC or QFULL. 1562 ** Contents are IDENTIFY and SIMPLE_TAG. 1563 ** While negotiating sync or wide transfer, 1564 ** a SDTR or WDTR message is appended. 1565 **---------------------------------------------------------------- 1566 */ 1567 u_char scsi_smsg [8]; 1568 u_char scsi_smsg2[8]; 1569 1570 /*---------------------------------------------------------------- 1571 ** Other fields. 1572 **---------------------------------------------------------------- 1573 */ 1574 u_long p_ccb; /* BUS address of this CCB */ 1575 u_char sensecmd[6]; /* Sense command */ 1576 u_char tag; /* Tag for this transfer */ 1577 /* 255 means no tag */ 1578 u_char target; 1579 u_char lun; 1580 u_char queued; 1581 u_char auto_sense; 1582 struct ccb * link_ccb; /* Host adapter CCB chain */ 1583 struct list_head link_ccbq; /* Link to unit CCB queue */ 1584 u32 startp; /* Initial data pointer */ 1585 u_long magic; /* Free / busy CCB flag */ 1586 }; 1587 1588 #define CCB_PHYS(cp,lbl) (cp->p_ccb + offsetof(struct ccb, lbl)) 1589 1590 1591 /*======================================================================== 1592 ** 1593 ** Declaration of structs: NCR device descriptor 1594 ** 1595 **======================================================================== 1596 */ 1597 struct ncb { 1598 /*---------------------------------------------------------------- 1599 ** The global header. 1600 ** It is accessible to both the host and the script processor. 1601 ** Must be cache line size aligned (32 for x86) in order to 1602 ** allow cache line bursting when it is copied to/from CCB. 1603 **---------------------------------------------------------------- 1604 */ 1605 struct head header; 1606 1607 /*---------------------------------------------------------------- 1608 ** CCBs management queues. 1609 **---------------------------------------------------------------- 1610 */ 1611 struct scsi_cmnd *waiting_list; /* Commands waiting for a CCB */ 1612 /* when lcb is not allocated. */ 1613 struct scsi_cmnd *done_list; /* Commands waiting for done() */ 1614 /* callback to be invoked. */ 1615 spinlock_t smp_lock; /* Lock for SMP threading */ 1616 1617 /*---------------------------------------------------------------- 1618 ** Chip and controller identification. 1619 **---------------------------------------------------------------- 1620 */ 1621 int unit; /* Unit number */ 1622 char inst_name[16]; /* ncb instance name */ 1623 1624 /*---------------------------------------------------------------- 1625 ** Initial value of some IO register bits. 1626 ** These values are assumed to have been set by BIOS, and may 1627 ** be used for probing adapter implementation differences. 1628 **---------------------------------------------------------------- 1629 */ 1630 u_char sv_scntl0, sv_scntl3, sv_dmode, sv_dcntl, sv_ctest0, sv_ctest3, 1631 sv_ctest4, sv_ctest5, sv_gpcntl, sv_stest2, sv_stest4; 1632 1633 /*---------------------------------------------------------------- 1634 ** Actual initial value of IO register bits used by the 1635 ** driver. They are loaded at initialisation according to 1636 ** features that are to be enabled. 1637 **---------------------------------------------------------------- 1638 */ 1639 u_char rv_scntl0, rv_scntl3, rv_dmode, rv_dcntl, rv_ctest0, rv_ctest3, 1640 rv_ctest4, rv_ctest5, rv_stest2; 1641 1642 /*---------------------------------------------------------------- 1643 ** Targets management. 1644 ** During reselection the ncr jumps to jump_tcb. 1645 ** The SFBR register is loaded with the encoded target id. 1646 ** For i = 0 to 3 1647 ** SCR_JUMP ^ IFTRUE(MASK(i, 3)), @(next tcb mod. i) 1648 ** 1649 ** Recent chips will prefetch the 4 JUMPS using only 1 burst. 1650 ** It is kind of hashcoding. 1651 **---------------------------------------------------------------- 1652 */ 1653 struct link jump_tcb[4]; /* JUMPs for reselection */ 1654 struct tcb target[MAX_TARGET]; /* Target data */ 1655 1656 /*---------------------------------------------------------------- 1657 ** Virtual and physical bus addresses of the chip. 1658 **---------------------------------------------------------------- 1659 */ 1660 void __iomem *vaddr; /* Virtual and bus address of */ 1661 unsigned long paddr; /* chip's IO registers. */ 1662 unsigned long paddr2; /* On-chip RAM bus address. */ 1663 volatile /* Pointer to volatile for */ 1664 struct ncr_reg __iomem *reg; /* memory mapped IO. */ 1665 1666 /*---------------------------------------------------------------- 1667 ** SCRIPTS virtual and physical bus addresses. 1668 ** 'script' is loaded in the on-chip RAM if present. 1669 ** 'scripth' stays in main memory. 1670 **---------------------------------------------------------------- 1671 */ 1672 struct script *script0; /* Copies of script and scripth */ 1673 struct scripth *scripth0; /* relocated for this ncb. */ 1674 struct scripth *scripth; /* Actual scripth virt. address */ 1675 u_long p_script; /* Actual script and scripth */ 1676 u_long p_scripth; /* bus addresses. */ 1677 1678 /*---------------------------------------------------------------- 1679 ** General controller parameters and configuration. 1680 **---------------------------------------------------------------- 1681 */ 1682 struct device *dev; 1683 u_char revision_id; /* PCI device revision id */ 1684 u32 irq; /* IRQ level */ 1685 u32 features; /* Chip features map */ 1686 u_char myaddr; /* SCSI id of the adapter */ 1687 u_char maxburst; /* log base 2 of dwords burst */ 1688 u_char maxwide; /* Maximum transfer width */ 1689 u_char minsync; /* Minimum sync period factor */ 1690 u_char maxsync; /* Maximum sync period factor */ 1691 u_char maxoffs; /* Max scsi offset */ 1692 u_char multiplier; /* Clock multiplier (1,2,4) */ 1693 u_char clock_divn; /* Number of clock divisors */ 1694 u_long clock_khz; /* SCSI clock frequency in KHz */ 1695 1696 /*---------------------------------------------------------------- 1697 ** Start queue management. 1698 ** It is filled up by the host processor and accessed by the 1699 ** SCRIPTS processor in order to start SCSI commands. 1700 **---------------------------------------------------------------- 1701 */ 1702 u16 squeueput; /* Next free slot of the queue */ 1703 u16 actccbs; /* Number of allocated CCBs */ 1704 u16 queuedccbs; /* Number of CCBs in start queue*/ 1705 u16 queuedepth; /* Start queue depth */ 1706 1707 /*---------------------------------------------------------------- 1708 ** Timeout handler. 1709 **---------------------------------------------------------------- 1710 */ 1711 struct timer_list timer; /* Timer handler link header */ 1712 u_long lasttime; 1713 u_long settle_time; /* Resetting the SCSI BUS */ 1714 1715 /*---------------------------------------------------------------- 1716 ** Debugging and profiling. 1717 **---------------------------------------------------------------- 1718 */ 1719 struct ncr_reg regdump; /* Register dump */ 1720 u_long regtime; /* Time it has been done */ 1721 1722 /*---------------------------------------------------------------- 1723 ** Miscellaneous buffers accessed by the scripts-processor. 1724 ** They shall be DWORD aligned, because they may be read or 1725 ** written with a SCR_COPY script command. 1726 **---------------------------------------------------------------- 1727 */ 1728 u_char msgout[8]; /* Buffer for MESSAGE OUT */ 1729 u_char msgin [8]; /* Buffer for MESSAGE IN */ 1730 u32 lastmsg; /* Last SCSI message sent */ 1731 u_char scratch; /* Scratch for SCSI receive */ 1732 1733 /*---------------------------------------------------------------- 1734 ** Miscellaneous configuration and status parameters. 1735 **---------------------------------------------------------------- 1736 */ 1737 u_char disc; /* Diconnection allowed */ 1738 u_char scsi_mode; /* Current SCSI BUS mode */ 1739 u_char order; /* Tag order to use */ 1740 u_char verbose; /* Verbosity for this controller*/ 1741 int ncr_cache; /* Used for cache test at init. */ 1742 u_long p_ncb; /* BUS address of this NCB */ 1743 1744 /*---------------------------------------------------------------- 1745 ** Command completion handling. 1746 **---------------------------------------------------------------- 1747 */ 1748 #ifdef SCSI_NCR_CCB_DONE_SUPPORT 1749 struct ccb *(ccb_done[MAX_DONE]); 1750 int ccb_done_ic; 1751 #endif 1752 /*---------------------------------------------------------------- 1753 ** Fields that should be removed or changed. 1754 **---------------------------------------------------------------- 1755 */ 1756 struct ccb *ccb; /* Global CCB */ 1757 struct usrcmd user; /* Command from user */ 1758 volatile u_char release_stage; /* Synchronisation stage on release */ 1759 }; 1760 1761 #define NCB_SCRIPT_PHYS(np,lbl) (np->p_script + offsetof (struct script, lbl)) 1762 #define NCB_SCRIPTH_PHYS(np,lbl) (np->p_scripth + offsetof (struct scripth,lbl)) 1763 1764 /*========================================================== 1765 ** 1766 ** 1767 ** Script for NCR-Processor. 1768 ** 1769 ** Use ncr_script_fill() to create the variable parts. 1770 ** Use ncr_script_copy_and_bind() to make a copy and 1771 ** bind to physical addresses. 1772 ** 1773 ** 1774 **========================================================== 1775 ** 1776 ** We have to know the offsets of all labels before 1777 ** we reach them (for forward jumps). 1778 ** Therefore we declare a struct here. 1779 ** If you make changes inside the script, 1780 ** DONT FORGET TO CHANGE THE LENGTHS HERE! 1781 ** 1782 **---------------------------------------------------------- 1783 */ 1784 1785 /* 1786 ** For HP Zalon/53c720 systems, the Zalon interface 1787 ** between CPU and 53c720 does prefetches, which causes 1788 ** problems with self modifying scripts. The problem 1789 ** is overcome by calling a dummy subroutine after each 1790 ** modification, to force a refetch of the script on 1791 ** return from the subroutine. 1792 */ 1793 1794 #ifdef CONFIG_NCR53C8XX_PREFETCH 1795 #define PREFETCH_FLUSH_CNT 2 1796 #define PREFETCH_FLUSH SCR_CALL, PADDRH (wait_dma), 1797 #else 1798 #define PREFETCH_FLUSH_CNT 0 1799 #define PREFETCH_FLUSH 1800 #endif 1801 1802 /* 1803 ** Script fragments which are loaded into the on-chip RAM 1804 ** of 825A, 875 and 895 chips. 1805 */ 1806 struct script { 1807 ncrcmd start [ 5]; 1808 ncrcmd startpos [ 1]; 1809 ncrcmd select [ 6]; 1810 ncrcmd select2 [ 9 + PREFETCH_FLUSH_CNT]; 1811 ncrcmd loadpos [ 4]; 1812 ncrcmd send_ident [ 9]; 1813 ncrcmd prepare [ 6]; 1814 ncrcmd prepare2 [ 7]; 1815 ncrcmd command [ 6]; 1816 ncrcmd dispatch [ 32]; 1817 ncrcmd clrack [ 4]; 1818 ncrcmd no_data [ 17]; 1819 ncrcmd status [ 8]; 1820 ncrcmd msg_in [ 2]; 1821 ncrcmd msg_in2 [ 16]; 1822 ncrcmd msg_bad [ 4]; 1823 ncrcmd setmsg [ 7]; 1824 ncrcmd cleanup [ 6]; 1825 ncrcmd complete [ 9]; 1826 ncrcmd cleanup_ok [ 8 + PREFETCH_FLUSH_CNT]; 1827 ncrcmd cleanup0 [ 1]; 1828 #ifndef SCSI_NCR_CCB_DONE_SUPPORT 1829 ncrcmd signal [ 12]; 1830 #else 1831 ncrcmd signal [ 9]; 1832 ncrcmd done_pos [ 1]; 1833 ncrcmd done_plug [ 2]; 1834 ncrcmd done_end [ 7]; 1835 #endif 1836 ncrcmd save_dp [ 7]; 1837 ncrcmd restore_dp [ 5]; 1838 ncrcmd disconnect [ 10]; 1839 ncrcmd msg_out [ 9]; 1840 ncrcmd msg_out_done [ 7]; 1841 ncrcmd idle [ 2]; 1842 ncrcmd reselect [ 8]; 1843 ncrcmd reselected [ 8]; 1844 ncrcmd resel_dsa [ 6 + PREFETCH_FLUSH_CNT]; 1845 ncrcmd loadpos1 [ 4]; 1846 ncrcmd resel_lun [ 6]; 1847 ncrcmd resel_tag [ 6]; 1848 ncrcmd jump_to_nexus [ 4 + PREFETCH_FLUSH_CNT]; 1849 ncrcmd nexus_indirect [ 4]; 1850 ncrcmd resel_notag [ 4]; 1851 ncrcmd data_in [MAX_SCATTERL * 4]; 1852 ncrcmd data_in2 [ 4]; 1853 ncrcmd data_out [MAX_SCATTERL * 4]; 1854 ncrcmd data_out2 [ 4]; 1855 }; 1856 1857 /* 1858 ** Script fragments which stay in main memory for all chips. 1859 */ 1860 struct scripth { 1861 ncrcmd tryloop [MAX_START*2]; 1862 ncrcmd tryloop2 [ 2]; 1863 #ifdef SCSI_NCR_CCB_DONE_SUPPORT 1864 ncrcmd done_queue [MAX_DONE*5]; 1865 ncrcmd done_queue2 [ 2]; 1866 #endif 1867 ncrcmd select_no_atn [ 8]; 1868 ncrcmd cancel [ 4]; 1869 ncrcmd skip [ 9 + PREFETCH_FLUSH_CNT]; 1870 ncrcmd skip2 [ 19]; 1871 ncrcmd par_err_data_in [ 6]; 1872 ncrcmd par_err_other [ 4]; 1873 ncrcmd msg_reject [ 8]; 1874 ncrcmd msg_ign_residue [ 24]; 1875 ncrcmd msg_extended [ 10]; 1876 ncrcmd msg_ext_2 [ 10]; 1877 ncrcmd msg_wdtr [ 14]; 1878 ncrcmd send_wdtr [ 7]; 1879 ncrcmd msg_ext_3 [ 10]; 1880 ncrcmd msg_sdtr [ 14]; 1881 ncrcmd send_sdtr [ 7]; 1882 ncrcmd nego_bad_phase [ 4]; 1883 ncrcmd msg_out_abort [ 10]; 1884 ncrcmd hdata_in [MAX_SCATTERH * 4]; 1885 ncrcmd hdata_in2 [ 2]; 1886 ncrcmd hdata_out [MAX_SCATTERH * 4]; 1887 ncrcmd hdata_out2 [ 2]; 1888 ncrcmd reset [ 4]; 1889 ncrcmd aborttag [ 4]; 1890 ncrcmd abort [ 2]; 1891 ncrcmd abort_resel [ 20]; 1892 ncrcmd resend_ident [ 4]; 1893 ncrcmd clratn_go_on [ 3]; 1894 ncrcmd nxtdsp_go_on [ 1]; 1895 ncrcmd sdata_in [ 8]; 1896 ncrcmd data_io [ 18]; 1897 ncrcmd bad_identify [ 12]; 1898 ncrcmd bad_i_t_l [ 4]; 1899 ncrcmd bad_i_t_l_q [ 4]; 1900 ncrcmd bad_target [ 8]; 1901 ncrcmd bad_status [ 8]; 1902 ncrcmd start_ram [ 4 + PREFETCH_FLUSH_CNT]; 1903 ncrcmd start_ram0 [ 4]; 1904 ncrcmd sto_restart [ 5]; 1905 ncrcmd wait_dma [ 2]; 1906 ncrcmd snooptest [ 9]; 1907 ncrcmd snoopend [ 2]; 1908 }; 1909 1910 /*========================================================== 1911 ** 1912 ** 1913 ** Function headers. 1914 ** 1915 ** 1916 **========================================================== 1917 */ 1918 1919 static void ncr_alloc_ccb (struct ncb *np, u_char tn, u_char ln); 1920 static void ncr_complete (struct ncb *np, struct ccb *cp); 1921 static void ncr_exception (struct ncb *np); 1922 static void ncr_free_ccb (struct ncb *np, struct ccb *cp); 1923 static void ncr_init_ccb (struct ncb *np, struct ccb *cp); 1924 static void ncr_init_tcb (struct ncb *np, u_char tn); 1925 static struct lcb * ncr_alloc_lcb (struct ncb *np, u_char tn, u_char ln); 1926 static struct lcb * ncr_setup_lcb (struct ncb *np, struct scsi_device *sdev); 1927 static void ncr_getclock (struct ncb *np, int mult); 1928 static void ncr_selectclock (struct ncb *np, u_char scntl3); 1929 static struct ccb *ncr_get_ccb (struct ncb *np, struct scsi_cmnd *cmd); 1930 static void ncr_chip_reset (struct ncb *np, int delay); 1931 static void ncr_init (struct ncb *np, int reset, char * msg, u_long code); 1932 static int ncr_int_sbmc (struct ncb *np); 1933 static int ncr_int_par (struct ncb *np); 1934 static void ncr_int_ma (struct ncb *np); 1935 static void ncr_int_sir (struct ncb *np); 1936 static void ncr_int_sto (struct ncb *np); 1937 static void ncr_negotiate (struct ncb* np, struct tcb* tp); 1938 static int ncr_prepare_nego(struct ncb *np, struct ccb *cp, u_char *msgptr); 1939 1940 static void ncr_script_copy_and_bind 1941 (struct ncb *np, ncrcmd *src, ncrcmd *dst, int len); 1942 static void ncr_script_fill (struct script * scr, struct scripth * scripth); 1943 static int ncr_scatter (struct ncb *np, struct ccb *cp, struct scsi_cmnd *cmd); 1944 static void ncr_getsync (struct ncb *np, u_char sfac, u_char *fakp, u_char *scntl3p); 1945 static void ncr_setsync (struct ncb *np, struct ccb *cp, u_char scntl3, u_char sxfer); 1946 static void ncr_setup_tags (struct ncb *np, struct scsi_device *sdev); 1947 static void ncr_setwide (struct ncb *np, struct ccb *cp, u_char wide, u_char ack); 1948 static int ncr_snooptest (struct ncb *np); 1949 static void ncr_timeout (struct ncb *np); 1950 static void ncr_wakeup (struct ncb *np, u_long code); 1951 static void ncr_wakeup_done (struct ncb *np); 1952 static void ncr_start_next_ccb (struct ncb *np, struct lcb * lp, int maxn); 1953 static void ncr_put_start_queue(struct ncb *np, struct ccb *cp); 1954 1955 static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd); 1956 static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd); 1957 static void process_waiting_list(struct ncb *np, int sts); 1958 1959 #define remove_from_waiting_list(np, cmd) \ 1960 retrieve_from_waiting_list(1, (np), (cmd)) 1961 #define requeue_waiting_list(np) process_waiting_list((np), DID_OK) 1962 #define reset_waiting_list(np) process_waiting_list((np), DID_RESET) 1963 1964 static inline char *ncr_name (struct ncb *np) 1965 { 1966 return np->inst_name; 1967 } 1968 1969 1970 /*========================================================== 1971 ** 1972 ** 1973 ** Scripts for NCR-Processor. 1974 ** 1975 ** Use ncr_script_bind for binding to physical addresses. 1976 ** 1977 ** 1978 **========================================================== 1979 ** 1980 ** NADDR generates a reference to a field of the controller data. 1981 ** PADDR generates a reference to another part of the script. 1982 ** RADDR generates a reference to a script processor register. 1983 ** FADDR generates a reference to a script processor register 1984 ** with offset. 1985 ** 1986 **---------------------------------------------------------- 1987 */ 1988 1989 #define RELOC_SOFTC 0x40000000 1990 #define RELOC_LABEL 0x50000000 1991 #define RELOC_REGISTER 0x60000000 1992 #if 0 1993 #define RELOC_KVAR 0x70000000 1994 #endif 1995 #define RELOC_LABELH 0x80000000 1996 #define RELOC_MASK 0xf0000000 1997 1998 #define NADDR(label) (RELOC_SOFTC | offsetof(struct ncb, label)) 1999 #define PADDR(label) (RELOC_LABEL | offsetof(struct script, label)) 2000 #define PADDRH(label) (RELOC_LABELH | offsetof(struct scripth, label)) 2001 #define RADDR(label) (RELOC_REGISTER | REG(label)) 2002 #define FADDR(label,ofs)(RELOC_REGISTER | ((REG(label))+(ofs))) 2003 #if 0 2004 #define KVAR(which) (RELOC_KVAR | (which)) 2005 #endif 2006 2007 #if 0 2008 #define SCRIPT_KVAR_JIFFIES (0) 2009 #define SCRIPT_KVAR_FIRST SCRIPT_KVAR_JIFFIES 2010 #define SCRIPT_KVAR_LAST SCRIPT_KVAR_JIFFIES 2011 /* 2012 * Kernel variables referenced in the scripts. 2013 * THESE MUST ALL BE ALIGNED TO A 4-BYTE BOUNDARY. 2014 */ 2015 static void *script_kvars[] __initdata = 2016 { (void *)&jiffies }; 2017 #endif 2018 2019 static struct script script0 __initdata = { 2020 /*--------------------------< START >-----------------------*/ { 2021 /* 2022 ** This NOP will be patched with LED ON 2023 ** SCR_REG_REG (gpreg, SCR_AND, 0xfe) 2024 */ 2025 SCR_NO_OP, 2026 0, 2027 /* 2028 ** Clear SIGP. 2029 */ 2030 SCR_FROM_REG (ctest2), 2031 0, 2032 /* 2033 ** Then jump to a certain point in tryloop. 2034 ** Due to the lack of indirect addressing the code 2035 ** is self modifying here. 2036 */ 2037 SCR_JUMP, 2038 }/*-------------------------< STARTPOS >--------------------*/,{ 2039 PADDRH(tryloop), 2040 2041 }/*-------------------------< SELECT >----------------------*/,{ 2042 /* 2043 ** DSA contains the address of a scheduled 2044 ** data structure. 2045 ** 2046 ** SCRATCHA contains the address of the script, 2047 ** which starts the next entry. 2048 ** 2049 ** Set Initiator mode. 2050 ** 2051 ** (Target mode is left as an exercise for the reader) 2052 */ 2053 2054 SCR_CLR (SCR_TRG), 2055 0, 2056 SCR_LOAD_REG (HS_REG, HS_SELECTING), 2057 0, 2058 2059 /* 2060 ** And try to select this target. 2061 */ 2062 SCR_SEL_TBL_ATN ^ offsetof (struct dsb, select), 2063 PADDR (reselect), 2064 2065 }/*-------------------------< SELECT2 >----------------------*/,{ 2066 /* 2067 ** Now there are 4 possibilities: 2068 ** 2069 ** (1) The ncr loses arbitration. 2070 ** This is ok, because it will try again, 2071 ** when the bus becomes idle. 2072 ** (But beware of the timeout function!) 2073 ** 2074 ** (2) The ncr is reselected. 2075 ** Then the script processor takes the jump 2076 ** to the RESELECT label. 2077 ** 2078 ** (3) The ncr wins arbitration. 2079 ** Then it will execute SCRIPTS instruction until 2080 ** the next instruction that checks SCSI phase. 2081 ** Then will stop and wait for selection to be 2082 ** complete or selection time-out to occur. 2083 ** As a result the SCRIPTS instructions until 2084 ** LOADPOS + 2 should be executed in parallel with 2085 ** the SCSI core performing selection. 2086 */ 2087 2088 /* 2089 ** The MESSAGE_REJECT problem seems to be due to a selection 2090 ** timing problem. 2091 ** Wait immediately for the selection to complete. 2092 ** (2.5x behaves so) 2093 */ 2094 SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_OUT)), 2095 0, 2096 2097 /* 2098 ** Next time use the next slot. 2099 */ 2100 SCR_COPY (4), 2101 RADDR (temp), 2102 PADDR (startpos), 2103 /* 2104 ** The ncr doesn't have an indirect load 2105 ** or store command. So we have to 2106 ** copy part of the control block to a 2107 ** fixed place, where we can access it. 2108 ** 2109 ** We patch the address part of a 2110 ** COPY command with the DSA-register. 2111 */ 2112 SCR_COPY_F (4), 2113 RADDR (dsa), 2114 PADDR (loadpos), 2115 /* 2116 ** Flush script prefetch if required 2117 */ 2118 PREFETCH_FLUSH 2119 /* 2120 ** then we do the actual copy. 2121 */ 2122 SCR_COPY (sizeof (struct head)), 2123 /* 2124 ** continued after the next label ... 2125 */ 2126 }/*-------------------------< LOADPOS >---------------------*/,{ 2127 0, 2128 NADDR (header), 2129 /* 2130 ** Wait for the next phase or the selection 2131 ** to complete or time-out. 2132 */ 2133 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), 2134 PADDR (prepare), 2135 2136 }/*-------------------------< SEND_IDENT >----------------------*/,{ 2137 /* 2138 ** Selection complete. 2139 ** Send the IDENTIFY and SIMPLE_TAG messages 2140 ** (and the EXTENDED_SDTR message) 2141 */ 2142 SCR_MOVE_TBL ^ SCR_MSG_OUT, 2143 offsetof (struct dsb, smsg), 2144 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), 2145 PADDRH (resend_ident), 2146 SCR_LOAD_REG (scratcha, 0x80), 2147 0, 2148 SCR_COPY (1), 2149 RADDR (scratcha), 2150 NADDR (lastmsg), 2151 }/*-------------------------< PREPARE >----------------------*/,{ 2152 /* 2153 ** load the savep (saved pointer) into 2154 ** the TEMP register (actual pointer) 2155 */ 2156 SCR_COPY (4), 2157 NADDR (header.savep), 2158 RADDR (temp), 2159 /* 2160 ** Initialize the status registers 2161 */ 2162 SCR_COPY (4), 2163 NADDR (header.status), 2164 RADDR (scr0), 2165 }/*-------------------------< PREPARE2 >---------------------*/,{ 2166 /* 2167 ** Initialize the msgout buffer with a NOOP message. 2168 */ 2169 SCR_LOAD_REG (scratcha, NOP), 2170 0, 2171 SCR_COPY (1), 2172 RADDR (scratcha), 2173 NADDR (msgout), 2174 #if 0 2175 SCR_COPY (1), 2176 RADDR (scratcha), 2177 NADDR (msgin), 2178 #endif 2179 /* 2180 ** Anticipate the COMMAND phase. 2181 ** This is the normal case for initial selection. 2182 */ 2183 SCR_JUMP ^ IFFALSE (WHEN (SCR_COMMAND)), 2184 PADDR (dispatch), 2185 2186 }/*-------------------------< COMMAND >--------------------*/,{ 2187 /* 2188 ** ... and send the command 2189 */ 2190 SCR_MOVE_TBL ^ SCR_COMMAND, 2191 offsetof (struct dsb, cmd), 2192 /* 2193 ** If status is still HS_NEGOTIATE, negotiation failed. 2194 ** We check this here, since we want to do that 2195 ** only once. 2196 */ 2197 SCR_FROM_REG (HS_REG), 2198 0, 2199 SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), 2200 SIR_NEGO_FAILED, 2201 2202 }/*-----------------------< DISPATCH >----------------------*/,{ 2203 /* 2204 ** MSG_IN is the only phase that shall be 2205 ** entered at least once for each (re)selection. 2206 ** So we test it first. 2207 */ 2208 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), 2209 PADDR (msg_in), 2210 2211 SCR_RETURN ^ IFTRUE (IF (SCR_DATA_OUT)), 2212 0, 2213 /* 2214 ** DEL 397 - 53C875 Rev 3 - Part Number 609-0392410 - ITEM 4. 2215 ** Possible data corruption during Memory Write and Invalidate. 2216 ** This work-around resets the addressing logic prior to the 2217 ** start of the first MOVE of a DATA IN phase. 2218 ** (See Documentation/scsi/ncr53c8xx.txt for more information) 2219 */ 2220 SCR_JUMPR ^ IFFALSE (IF (SCR_DATA_IN)), 2221 20, 2222 SCR_COPY (4), 2223 RADDR (scratcha), 2224 RADDR (scratcha), 2225 SCR_RETURN, 2226 0, 2227 SCR_JUMP ^ IFTRUE (IF (SCR_STATUS)), 2228 PADDR (status), 2229 SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND)), 2230 PADDR (command), 2231 SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT)), 2232 PADDR (msg_out), 2233 /* 2234 ** Discard one illegal phase byte, if required. 2235 */ 2236 SCR_LOAD_REG (scratcha, XE_BAD_PHASE), 2237 0, 2238 SCR_COPY (1), 2239 RADDR (scratcha), 2240 NADDR (xerr_st), 2241 SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_OUT)), 2242 8, 2243 SCR_MOVE_ABS (1) ^ SCR_ILG_OUT, 2244 NADDR (scratch), 2245 SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_IN)), 2246 8, 2247 SCR_MOVE_ABS (1) ^ SCR_ILG_IN, 2248 NADDR (scratch), 2249 SCR_JUMP, 2250 PADDR (dispatch), 2251 2252 }/*-------------------------< CLRACK >----------------------*/,{ 2253 /* 2254 ** Terminate possible pending message phase. 2255 */ 2256 SCR_CLR (SCR_ACK), 2257 0, 2258 SCR_JUMP, 2259 PADDR (dispatch), 2260 2261 }/*-------------------------< NO_DATA >--------------------*/,{ 2262 /* 2263 ** The target wants to tranfer too much data 2264 ** or in the wrong direction. 2265 ** Remember that in extended error. 2266 */ 2267 SCR_LOAD_REG (scratcha, XE_EXTRA_DATA), 2268 0, 2269 SCR_COPY (1), 2270 RADDR (scratcha), 2271 NADDR (xerr_st), 2272 /* 2273 ** Discard one data byte, if required. 2274 */ 2275 SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_OUT)), 2276 8, 2277 SCR_MOVE_ABS (1) ^ SCR_DATA_OUT, 2278 NADDR (scratch), 2279 SCR_JUMPR ^ IFFALSE (IF (SCR_DATA_IN)), 2280 8, 2281 SCR_MOVE_ABS (1) ^ SCR_DATA_IN, 2282 NADDR (scratch), 2283 /* 2284 ** .. and repeat as required. 2285 */ 2286 SCR_CALL, 2287 PADDR (dispatch), 2288 SCR_JUMP, 2289 PADDR (no_data), 2290 2291 }/*-------------------------< STATUS >--------------------*/,{ 2292 /* 2293 ** get the status 2294 */ 2295 SCR_MOVE_ABS (1) ^ SCR_STATUS, 2296 NADDR (scratch), 2297 /* 2298 ** save status to scsi_status. 2299 ** mark as complete. 2300 */ 2301 SCR_TO_REG (SS_REG), 2302 0, 2303 SCR_LOAD_REG (HS_REG, HS_COMPLETE), 2304 0, 2305 SCR_JUMP, 2306 PADDR (dispatch), 2307 }/*-------------------------< MSG_IN >--------------------*/,{ 2308 /* 2309 ** Get the first byte of the message 2310 ** and save it to SCRATCHA. 2311 ** 2312 ** The script processor doesn't negate the 2313 ** ACK signal after this transfer. 2314 */ 2315 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2316 NADDR (msgin[0]), 2317 }/*-------------------------< MSG_IN2 >--------------------*/,{ 2318 /* 2319 ** Handle this message. 2320 */ 2321 SCR_JUMP ^ IFTRUE (DATA (COMMAND_COMPLETE)), 2322 PADDR (complete), 2323 SCR_JUMP ^ IFTRUE (DATA (DISCONNECT)), 2324 PADDR (disconnect), 2325 SCR_JUMP ^ IFTRUE (DATA (SAVE_POINTERS)), 2326 PADDR (save_dp), 2327 SCR_JUMP ^ IFTRUE (DATA (RESTORE_POINTERS)), 2328 PADDR (restore_dp), 2329 SCR_JUMP ^ IFTRUE (DATA (EXTENDED_MESSAGE)), 2330 PADDRH (msg_extended), 2331 SCR_JUMP ^ IFTRUE (DATA (NOP)), 2332 PADDR (clrack), 2333 SCR_JUMP ^ IFTRUE (DATA (MESSAGE_REJECT)), 2334 PADDRH (msg_reject), 2335 SCR_JUMP ^ IFTRUE (DATA (IGNORE_WIDE_RESIDUE)), 2336 PADDRH (msg_ign_residue), 2337 /* 2338 ** Rest of the messages left as 2339 ** an exercise ... 2340 ** 2341 ** Unimplemented messages: 2342 ** fall through to MSG_BAD. 2343 */ 2344 }/*-------------------------< MSG_BAD >------------------*/,{ 2345 /* 2346 ** unimplemented message - reject it. 2347 */ 2348 SCR_INT, 2349 SIR_REJECT_SENT, 2350 SCR_LOAD_REG (scratcha, MESSAGE_REJECT), 2351 0, 2352 }/*-------------------------< SETMSG >----------------------*/,{ 2353 SCR_COPY (1), 2354 RADDR (scratcha), 2355 NADDR (msgout), 2356 SCR_SET (SCR_ATN), 2357 0, 2358 SCR_JUMP, 2359 PADDR (clrack), 2360 }/*-------------------------< CLEANUP >-------------------*/,{ 2361 /* 2362 ** dsa: Pointer to ccb 2363 ** or xxxxxxFF (no ccb) 2364 ** 2365 ** HS_REG: Host-Status (<>0!) 2366 */ 2367 SCR_FROM_REG (dsa), 2368 0, 2369 SCR_JUMP ^ IFTRUE (DATA (0xff)), 2370 PADDR (start), 2371 /* 2372 ** dsa is valid. 2373 ** complete the cleanup. 2374 */ 2375 SCR_JUMP, 2376 PADDR (cleanup_ok), 2377 2378 }/*-------------------------< COMPLETE >-----------------*/,{ 2379 /* 2380 ** Complete message. 2381 ** 2382 ** Copy TEMP register to LASTP in header. 2383 */ 2384 SCR_COPY (4), 2385 RADDR (temp), 2386 NADDR (header.lastp), 2387 /* 2388 ** When we terminate the cycle by clearing ACK, 2389 ** the target may disconnect immediately. 2390 ** 2391 ** We don't want to be told of an 2392 ** "unexpected disconnect", 2393 ** so we disable this feature. 2394 */ 2395 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 2396 0, 2397 /* 2398 ** Terminate cycle ... 2399 */ 2400 SCR_CLR (SCR_ACK|SCR_ATN), 2401 0, 2402 /* 2403 ** ... and wait for the disconnect. 2404 */ 2405 SCR_WAIT_DISC, 2406 0, 2407 }/*-------------------------< CLEANUP_OK >----------------*/,{ 2408 /* 2409 ** Save host status to header. 2410 */ 2411 SCR_COPY (4), 2412 RADDR (scr0), 2413 NADDR (header.status), 2414 /* 2415 ** and copy back the header to the ccb. 2416 */ 2417 SCR_COPY_F (4), 2418 RADDR (dsa), 2419 PADDR (cleanup0), 2420 /* 2421 ** Flush script prefetch if required 2422 */ 2423 PREFETCH_FLUSH 2424 SCR_COPY (sizeof (struct head)), 2425 NADDR (header), 2426 }/*-------------------------< CLEANUP0 >--------------------*/,{ 2427 0, 2428 }/*-------------------------< SIGNAL >----------------------*/,{ 2429 /* 2430 ** if job not completed ... 2431 */ 2432 SCR_FROM_REG (HS_REG), 2433 0, 2434 /* 2435 ** ... start the next command. 2436 */ 2437 SCR_JUMP ^ IFTRUE (MASK (0, (HS_DONEMASK|HS_SKIPMASK))), 2438 PADDR(start), 2439 /* 2440 ** If command resulted in not GOOD status, 2441 ** call the C code if needed. 2442 */ 2443 SCR_FROM_REG (SS_REG), 2444 0, 2445 SCR_CALL ^ IFFALSE (DATA (S_GOOD)), 2446 PADDRH (bad_status), 2447 2448 #ifndef SCSI_NCR_CCB_DONE_SUPPORT 2449 2450 /* 2451 ** ... signal completion to the host 2452 */ 2453 SCR_INT, 2454 SIR_INTFLY, 2455 /* 2456 ** Auf zu neuen Schandtaten! 2457 */ 2458 SCR_JUMP, 2459 PADDR(start), 2460 2461 #else /* defined SCSI_NCR_CCB_DONE_SUPPORT */ 2462 2463 /* 2464 ** ... signal completion to the host 2465 */ 2466 SCR_JUMP, 2467 }/*------------------------< DONE_POS >---------------------*/,{ 2468 PADDRH (done_queue), 2469 }/*------------------------< DONE_PLUG >--------------------*/,{ 2470 SCR_INT, 2471 SIR_DONE_OVERFLOW, 2472 }/*------------------------< DONE_END >---------------------*/,{ 2473 SCR_INT, 2474 SIR_INTFLY, 2475 SCR_COPY (4), 2476 RADDR (temp), 2477 PADDR (done_pos), 2478 SCR_JUMP, 2479 PADDR (start), 2480 2481 #endif /* SCSI_NCR_CCB_DONE_SUPPORT */ 2482 2483 }/*-------------------------< SAVE_DP >------------------*/,{ 2484 /* 2485 ** SAVE_DP message: 2486 ** Copy TEMP register to SAVEP in header. 2487 */ 2488 SCR_COPY (4), 2489 RADDR (temp), 2490 NADDR (header.savep), 2491 SCR_CLR (SCR_ACK), 2492 0, 2493 SCR_JUMP, 2494 PADDR (dispatch), 2495 }/*-------------------------< RESTORE_DP >---------------*/,{ 2496 /* 2497 ** RESTORE_DP message: 2498 ** Copy SAVEP in header to TEMP register. 2499 */ 2500 SCR_COPY (4), 2501 NADDR (header.savep), 2502 RADDR (temp), 2503 SCR_JUMP, 2504 PADDR (clrack), 2505 2506 }/*-------------------------< DISCONNECT >---------------*/,{ 2507 /* 2508 ** DISCONNECTing ... 2509 ** 2510 ** disable the "unexpected disconnect" feature, 2511 ** and remove the ACK signal. 2512 */ 2513 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 2514 0, 2515 SCR_CLR (SCR_ACK|SCR_ATN), 2516 0, 2517 /* 2518 ** Wait for the disconnect. 2519 */ 2520 SCR_WAIT_DISC, 2521 0, 2522 /* 2523 ** Status is: DISCONNECTED. 2524 */ 2525 SCR_LOAD_REG (HS_REG, HS_DISCONNECT), 2526 0, 2527 SCR_JUMP, 2528 PADDR (cleanup_ok), 2529 2530 }/*-------------------------< MSG_OUT >-------------------*/,{ 2531 /* 2532 ** The target requests a message. 2533 */ 2534 SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, 2535 NADDR (msgout), 2536 SCR_COPY (1), 2537 NADDR (msgout), 2538 NADDR (lastmsg), 2539 /* 2540 ** If it was no ABORT message ... 2541 */ 2542 SCR_JUMP ^ IFTRUE (DATA (ABORT_TASK_SET)), 2543 PADDRH (msg_out_abort), 2544 /* 2545 ** ... wait for the next phase 2546 ** if it's a message out, send it again, ... 2547 */ 2548 SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), 2549 PADDR (msg_out), 2550 }/*-------------------------< MSG_OUT_DONE >--------------*/,{ 2551 /* 2552 ** ... else clear the message ... 2553 */ 2554 SCR_LOAD_REG (scratcha, NOP), 2555 0, 2556 SCR_COPY (4), 2557 RADDR (scratcha), 2558 NADDR (msgout), 2559 /* 2560 ** ... and process the next phase 2561 */ 2562 SCR_JUMP, 2563 PADDR (dispatch), 2564 }/*-------------------------< IDLE >------------------------*/,{ 2565 /* 2566 ** Nothing to do? 2567 ** Wait for reselect. 2568 ** This NOP will be patched with LED OFF 2569 ** SCR_REG_REG (gpreg, SCR_OR, 0x01) 2570 */ 2571 SCR_NO_OP, 2572 0, 2573 }/*-------------------------< RESELECT >--------------------*/,{ 2574 /* 2575 ** make the DSA invalid. 2576 */ 2577 SCR_LOAD_REG (dsa, 0xff), 2578 0, 2579 SCR_CLR (SCR_TRG), 2580 0, 2581 SCR_LOAD_REG (HS_REG, HS_IN_RESELECT), 2582 0, 2583 /* 2584 ** Sleep waiting for a reselection. 2585 ** If SIGP is set, special treatment. 2586 ** 2587 ** Zu allem bereit .. 2588 */ 2589 SCR_WAIT_RESEL, 2590 PADDR(start), 2591 }/*-------------------------< RESELECTED >------------------*/,{ 2592 /* 2593 ** This NOP will be patched with LED ON 2594 ** SCR_REG_REG (gpreg, SCR_AND, 0xfe) 2595 */ 2596 SCR_NO_OP, 2597 0, 2598 /* 2599 ** ... zu nichts zu gebrauchen ? 2600 ** 2601 ** load the target id into the SFBR 2602 ** and jump to the control block. 2603 ** 2604 ** Look at the declarations of 2605 ** - struct ncb 2606 ** - struct tcb 2607 ** - struct lcb 2608 ** - struct ccb 2609 ** to understand what's going on. 2610 */ 2611 SCR_REG_SFBR (ssid, SCR_AND, 0x8F), 2612 0, 2613 SCR_TO_REG (sdid), 2614 0, 2615 SCR_JUMP, 2616 NADDR (jump_tcb), 2617 2618 }/*-------------------------< RESEL_DSA >-------------------*/,{ 2619 /* 2620 ** Ack the IDENTIFY or TAG previously received. 2621 */ 2622 SCR_CLR (SCR_ACK), 2623 0, 2624 /* 2625 ** The ncr doesn't have an indirect load 2626 ** or store command. So we have to 2627 ** copy part of the control block to a 2628 ** fixed place, where we can access it. 2629 ** 2630 ** We patch the address part of a 2631 ** COPY command with the DSA-register. 2632 */ 2633 SCR_COPY_F (4), 2634 RADDR (dsa), 2635 PADDR (loadpos1), 2636 /* 2637 ** Flush script prefetch if required 2638 */ 2639 PREFETCH_FLUSH 2640 /* 2641 ** then we do the actual copy. 2642 */ 2643 SCR_COPY (sizeof (struct head)), 2644 /* 2645 ** continued after the next label ... 2646 */ 2647 2648 }/*-------------------------< LOADPOS1 >-------------------*/,{ 2649 0, 2650 NADDR (header), 2651 /* 2652 ** The DSA contains the data structure address. 2653 */ 2654 SCR_JUMP, 2655 PADDR (prepare), 2656 2657 }/*-------------------------< RESEL_LUN >-------------------*/,{ 2658 /* 2659 ** come back to this point 2660 ** to get an IDENTIFY message 2661 ** Wait for a msg_in phase. 2662 */ 2663 SCR_INT ^ IFFALSE (WHEN (SCR_MSG_IN)), 2664 SIR_RESEL_NO_MSG_IN, 2665 /* 2666 ** message phase. 2667 ** Read the data directly from the BUS DATA lines. 2668 ** This helps to support very old SCSI devices that 2669 ** may reselect without sending an IDENTIFY. 2670 */ 2671 SCR_FROM_REG (sbdl), 2672 0, 2673 /* 2674 ** It should be an Identify message. 2675 */ 2676 SCR_RETURN, 2677 0, 2678 }/*-------------------------< RESEL_TAG >-------------------*/,{ 2679 /* 2680 ** Read IDENTIFY + SIMPLE + TAG using a single MOVE. 2681 ** Aggressive optimization, is'nt it? 2682 ** No need to test the SIMPLE TAG message, since the 2683 ** driver only supports conformant devices for tags. ;-) 2684 */ 2685 SCR_MOVE_ABS (3) ^ SCR_MSG_IN, 2686 NADDR (msgin), 2687 /* 2688 ** Read the TAG from the SIDL. 2689 ** Still an aggressive optimization. ;-) 2690 ** Compute the CCB indirect jump address which 2691 ** is (#TAG*2 & 0xfc) due to tag numbering using 2692 ** 1,3,5..MAXTAGS*2+1 actual values. 2693 */ 2694 SCR_REG_SFBR (sidl, SCR_SHL, 0), 2695 0, 2696 SCR_SFBR_REG (temp, SCR_AND, 0xfc), 2697 0, 2698 }/*-------------------------< JUMP_TO_NEXUS >-------------------*/,{ 2699 SCR_COPY_F (4), 2700 RADDR (temp), 2701 PADDR (nexus_indirect), 2702 /* 2703 ** Flush script prefetch if required 2704 */ 2705 PREFETCH_FLUSH 2706 SCR_COPY (4), 2707 }/*-------------------------< NEXUS_INDIRECT >-------------------*/,{ 2708 0, 2709 RADDR (temp), 2710 SCR_RETURN, 2711 0, 2712 }/*-------------------------< RESEL_NOTAG >-------------------*/,{ 2713 /* 2714 ** No tag expected. 2715 ** Read an throw away the IDENTIFY. 2716 */ 2717 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2718 NADDR (msgin), 2719 SCR_JUMP, 2720 PADDR (jump_to_nexus), 2721 }/*-------------------------< DATA_IN >--------------------*/,{ 2722 /* 2723 ** Because the size depends on the 2724 ** #define MAX_SCATTERL parameter, 2725 ** it is filled in at runtime. 2726 ** 2727 ** ##===========< i=0; i<MAX_SCATTERL >========= 2728 ** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)), 2729 ** || PADDR (dispatch), 2730 ** || SCR_MOVE_TBL ^ SCR_DATA_IN, 2731 ** || offsetof (struct dsb, data[ i]), 2732 ** ##========================================== 2733 ** 2734 **--------------------------------------------------------- 2735 */ 2736 0 2737 }/*-------------------------< DATA_IN2 >-------------------*/,{ 2738 SCR_CALL, 2739 PADDR (dispatch), 2740 SCR_JUMP, 2741 PADDR (no_data), 2742 }/*-------------------------< DATA_OUT >--------------------*/,{ 2743 /* 2744 ** Because the size depends on the 2745 ** #define MAX_SCATTERL parameter, 2746 ** it is filled in at runtime. 2747 ** 2748 ** ##===========< i=0; i<MAX_SCATTERL >========= 2749 ** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)), 2750 ** || PADDR (dispatch), 2751 ** || SCR_MOVE_TBL ^ SCR_DATA_OUT, 2752 ** || offsetof (struct dsb, data[ i]), 2753 ** ##========================================== 2754 ** 2755 **--------------------------------------------------------- 2756 */ 2757 0 2758 }/*-------------------------< DATA_OUT2 >-------------------*/,{ 2759 SCR_CALL, 2760 PADDR (dispatch), 2761 SCR_JUMP, 2762 PADDR (no_data), 2763 }/*--------------------------------------------------------*/ 2764 }; 2765 2766 static struct scripth scripth0 __initdata = { 2767 /*-------------------------< TRYLOOP >---------------------*/{ 2768 /* 2769 ** Start the next entry. 2770 ** Called addresses point to the launch script in the CCB. 2771 ** They are patched by the main processor. 2772 ** 2773 ** Because the size depends on the 2774 ** #define MAX_START parameter, it is filled 2775 ** in at runtime. 2776 ** 2777 **----------------------------------------------------------- 2778 ** 2779 ** ##===========< I=0; i<MAX_START >=========== 2780 ** || SCR_CALL, 2781 ** || PADDR (idle), 2782 ** ##========================================== 2783 ** 2784 **----------------------------------------------------------- 2785 */ 2786 0 2787 }/*------------------------< TRYLOOP2 >---------------------*/,{ 2788 SCR_JUMP, 2789 PADDRH(tryloop), 2790 2791 #ifdef SCSI_NCR_CCB_DONE_SUPPORT 2792 2793 }/*------------------------< DONE_QUEUE >-------------------*/,{ 2794 /* 2795 ** Copy the CCB address to the next done entry. 2796 ** Because the size depends on the 2797 ** #define MAX_DONE parameter, it is filled 2798 ** in at runtime. 2799 ** 2800 **----------------------------------------------------------- 2801 ** 2802 ** ##===========< I=0; i<MAX_DONE >=========== 2803 ** || SCR_COPY (sizeof(struct ccb *), 2804 ** || NADDR (header.cp), 2805 ** || NADDR (ccb_done[i]), 2806 ** || SCR_CALL, 2807 ** || PADDR (done_end), 2808 ** ##========================================== 2809 ** 2810 **----------------------------------------------------------- 2811 */ 2812 0 2813 }/*------------------------< DONE_QUEUE2 >------------------*/,{ 2814 SCR_JUMP, 2815 PADDRH (done_queue), 2816 2817 #endif /* SCSI_NCR_CCB_DONE_SUPPORT */ 2818 }/*------------------------< SELECT_NO_ATN >-----------------*/,{ 2819 /* 2820 ** Set Initiator mode. 2821 ** And try to select this target without ATN. 2822 */ 2823 2824 SCR_CLR (SCR_TRG), 2825 0, 2826 SCR_LOAD_REG (HS_REG, HS_SELECTING), 2827 0, 2828 SCR_SEL_TBL ^ offsetof (struct dsb, select), 2829 PADDR (reselect), 2830 SCR_JUMP, 2831 PADDR (select2), 2832 2833 }/*-------------------------< CANCEL >------------------------*/,{ 2834 2835 SCR_LOAD_REG (scratcha, HS_ABORTED), 2836 0, 2837 SCR_JUMPR, 2838 8, 2839 }/*-------------------------< SKIP >------------------------*/,{ 2840 SCR_LOAD_REG (scratcha, 0), 2841 0, 2842 /* 2843 ** This entry has been canceled. 2844 ** Next time use the next slot. 2845 */ 2846 SCR_COPY (4), 2847 RADDR (temp), 2848 PADDR (startpos), 2849 /* 2850 ** The ncr doesn't have an indirect load 2851 ** or store command. So we have to 2852 ** copy part of the control block to a 2853 ** fixed place, where we can access it. 2854 ** 2855 ** We patch the address part of a 2856 ** COPY command with the DSA-register. 2857 */ 2858 SCR_COPY_F (4), 2859 RADDR (dsa), 2860 PADDRH (skip2), 2861 /* 2862 ** Flush script prefetch if required 2863 */ 2864 PREFETCH_FLUSH 2865 /* 2866 ** then we do the actual copy. 2867 */ 2868 SCR_COPY (sizeof (struct head)), 2869 /* 2870 ** continued after the next label ... 2871 */ 2872 }/*-------------------------< SKIP2 >---------------------*/,{ 2873 0, 2874 NADDR (header), 2875 /* 2876 ** Initialize the status registers 2877 */ 2878 SCR_COPY (4), 2879 NADDR (header.status), 2880 RADDR (scr0), 2881 /* 2882 ** Force host status. 2883 */ 2884 SCR_FROM_REG (scratcha), 2885 0, 2886 SCR_JUMPR ^ IFFALSE (MASK (0, HS_DONEMASK)), 2887 16, 2888 SCR_REG_REG (HS_REG, SCR_OR, HS_SKIPMASK), 2889 0, 2890 SCR_JUMPR, 2891 8, 2892 SCR_TO_REG (HS_REG), 2893 0, 2894 SCR_LOAD_REG (SS_REG, S_GOOD), 2895 0, 2896 SCR_JUMP, 2897 PADDR (cleanup_ok), 2898 2899 },/*-------------------------< PAR_ERR_DATA_IN >---------------*/{ 2900 /* 2901 ** Ignore all data in byte, until next phase 2902 */ 2903 SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), 2904 PADDRH (par_err_other), 2905 SCR_MOVE_ABS (1) ^ SCR_DATA_IN, 2906 NADDR (scratch), 2907 SCR_JUMPR, 2908 -24, 2909 },/*-------------------------< PAR_ERR_OTHER >------------------*/{ 2910 /* 2911 ** count it. 2912 */ 2913 SCR_REG_REG (PS_REG, SCR_ADD, 0x01), 2914 0, 2915 /* 2916 ** jump to dispatcher. 2917 */ 2918 SCR_JUMP, 2919 PADDR (dispatch), 2920 }/*-------------------------< MSG_REJECT >---------------*/,{ 2921 /* 2922 ** If a negotiation was in progress, 2923 ** negotiation failed. 2924 ** Otherwise, let the C code print 2925 ** some message. 2926 */ 2927 SCR_FROM_REG (HS_REG), 2928 0, 2929 SCR_INT ^ IFFALSE (DATA (HS_NEGOTIATE)), 2930 SIR_REJECT_RECEIVED, 2931 SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), 2932 SIR_NEGO_FAILED, 2933 SCR_JUMP, 2934 PADDR (clrack), 2935 2936 }/*-------------------------< MSG_IGN_RESIDUE >----------*/,{ 2937 /* 2938 ** Terminate cycle 2939 */ 2940 SCR_CLR (SCR_ACK), 2941 0, 2942 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2943 PADDR (dispatch), 2944 /* 2945 ** get residue size. 2946 */ 2947 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2948 NADDR (msgin[1]), 2949 /* 2950 ** Size is 0 .. ignore message. 2951 */ 2952 SCR_JUMP ^ IFTRUE (DATA (0)), 2953 PADDR (clrack), 2954 /* 2955 ** Size is not 1 .. have to interrupt. 2956 */ 2957 SCR_JUMPR ^ IFFALSE (DATA (1)), 2958 40, 2959 /* 2960 ** Check for residue byte in swide register 2961 */ 2962 SCR_FROM_REG (scntl2), 2963 0, 2964 SCR_JUMPR ^ IFFALSE (MASK (WSR, WSR)), 2965 16, 2966 /* 2967 ** There IS data in the swide register. 2968 ** Discard it. 2969 */ 2970 SCR_REG_REG (scntl2, SCR_OR, WSR), 2971 0, 2972 SCR_JUMP, 2973 PADDR (clrack), 2974 /* 2975 ** Load again the size to the sfbr register. 2976 */ 2977 SCR_FROM_REG (scratcha), 2978 0, 2979 SCR_INT, 2980 SIR_IGN_RESIDUE, 2981 SCR_JUMP, 2982 PADDR (clrack), 2983 2984 }/*-------------------------< MSG_EXTENDED >-------------*/,{ 2985 /* 2986 ** Terminate cycle 2987 */ 2988 SCR_CLR (SCR_ACK), 2989 0, 2990 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 2991 PADDR (dispatch), 2992 /* 2993 ** get length. 2994 */ 2995 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 2996 NADDR (msgin[1]), 2997 /* 2998 */ 2999 SCR_JUMP ^ IFTRUE (DATA (3)), 3000 PADDRH (msg_ext_3), 3001 SCR_JUMP ^ IFFALSE (DATA (2)), 3002 PADDR (msg_bad), 3003 }/*-------------------------< MSG_EXT_2 >----------------*/,{ 3004 SCR_CLR (SCR_ACK), 3005 0, 3006 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 3007 PADDR (dispatch), 3008 /* 3009 ** get extended message code. 3010 */ 3011 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 3012 NADDR (msgin[2]), 3013 SCR_JUMP ^ IFTRUE (DATA (EXTENDED_WDTR)), 3014 PADDRH (msg_wdtr), 3015 /* 3016 ** unknown extended message 3017 */ 3018 SCR_JUMP, 3019 PADDR (msg_bad) 3020 }/*-------------------------< MSG_WDTR >-----------------*/,{ 3021 SCR_CLR (SCR_ACK), 3022 0, 3023 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 3024 PADDR (dispatch), 3025 /* 3026 ** get data bus width 3027 */ 3028 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 3029 NADDR (msgin[3]), 3030 /* 3031 ** let the host do the real work. 3032 */ 3033 SCR_INT, 3034 SIR_NEGO_WIDE, 3035 /* 3036 ** let the target fetch our answer. 3037 */ 3038 SCR_SET (SCR_ATN), 3039 0, 3040 SCR_CLR (SCR_ACK), 3041 0, 3042 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), 3043 PADDRH (nego_bad_phase), 3044 3045 }/*-------------------------< SEND_WDTR >----------------*/,{ 3046 /* 3047 ** Send the EXTENDED_WDTR 3048 */ 3049 SCR_MOVE_ABS (4) ^ SCR_MSG_OUT, 3050 NADDR (msgout), 3051 SCR_COPY (1), 3052 NADDR (msgout), 3053 NADDR (lastmsg), 3054 SCR_JUMP, 3055 PADDR (msg_out_done), 3056 3057 }/*-------------------------< MSG_EXT_3 >----------------*/,{ 3058 SCR_CLR (SCR_ACK), 3059 0, 3060 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 3061 PADDR (dispatch), 3062 /* 3063 ** get extended message code. 3064 */ 3065 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 3066 NADDR (msgin[2]), 3067 SCR_JUMP ^ IFTRUE (DATA (EXTENDED_SDTR)), 3068 PADDRH (msg_sdtr), 3069 /* 3070 ** unknown extended message 3071 */ 3072 SCR_JUMP, 3073 PADDR (msg_bad) 3074 3075 }/*-------------------------< MSG_SDTR >-----------------*/,{ 3076 SCR_CLR (SCR_ACK), 3077 0, 3078 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), 3079 PADDR (dispatch), 3080 /* 3081 ** get period and offset 3082 */ 3083 SCR_MOVE_ABS (2) ^ SCR_MSG_IN, 3084 NADDR (msgin[3]), 3085 /* 3086 ** let the host do the real work. 3087 */ 3088 SCR_INT, 3089 SIR_NEGO_SYNC, 3090 /* 3091 ** let the target fetch our answer. 3092 */ 3093 SCR_SET (SCR_ATN), 3094 0, 3095 SCR_CLR (SCR_ACK), 3096 0, 3097 SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), 3098 PADDRH (nego_bad_phase), 3099 3100 }/*-------------------------< SEND_SDTR >-------------*/,{ 3101 /* 3102 ** Send the EXTENDED_SDTR 3103 */ 3104 SCR_MOVE_ABS (5) ^ SCR_MSG_OUT, 3105 NADDR (msgout), 3106 SCR_COPY (1), 3107 NADDR (msgout), 3108 NADDR (lastmsg), 3109 SCR_JUMP, 3110 PADDR (msg_out_done), 3111 3112 }/*-------------------------< NEGO_BAD_PHASE >------------*/,{ 3113 SCR_INT, 3114 SIR_NEGO_PROTO, 3115 SCR_JUMP, 3116 PADDR (dispatch), 3117 3118 }/*-------------------------< MSG_OUT_ABORT >-------------*/,{ 3119 /* 3120 ** After ABORT message, 3121 ** 3122 ** expect an immediate disconnect, ... 3123 */ 3124 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 3125 0, 3126 SCR_CLR (SCR_ACK|SCR_ATN), 3127 0, 3128 SCR_WAIT_DISC, 3129 0, 3130 /* 3131 ** ... and set the status to "ABORTED" 3132 */ 3133 SCR_LOAD_REG (HS_REG, HS_ABORTED), 3134 0, 3135 SCR_JUMP, 3136 PADDR (cleanup), 3137 3138 }/*-------------------------< HDATA_IN >-------------------*/,{ 3139 /* 3140 ** Because the size depends on the 3141 ** #define MAX_SCATTERH parameter, 3142 ** it is filled in at runtime. 3143 ** 3144 ** ##==< i=MAX_SCATTERL; i<MAX_SCATTERL+MAX_SCATTERH >== 3145 ** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)), 3146 ** || PADDR (dispatch), 3147 ** || SCR_MOVE_TBL ^ SCR_DATA_IN, 3148 ** || offsetof (struct dsb, data[ i]), 3149 ** ##=================================================== 3150 ** 3151 **--------------------------------------------------------- 3152 */ 3153 0 3154 }/*-------------------------< HDATA_IN2 >------------------*/,{ 3155 SCR_JUMP, 3156 PADDR (data_in), 3157 3158 }/*-------------------------< HDATA_OUT >-------------------*/,{ 3159 /* 3160 ** Because the size depends on the 3161 ** #define MAX_SCATTERH parameter, 3162 ** it is filled in at runtime. 3163 ** 3164 ** ##==< i=MAX_SCATTERL; i<MAX_SCATTERL+MAX_SCATTERH >== 3165 ** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)), 3166 ** || PADDR (dispatch), 3167 ** || SCR_MOVE_TBL ^ SCR_DATA_OUT, 3168 ** || offsetof (struct dsb, data[ i]), 3169 ** ##=================================================== 3170 ** 3171 **--------------------------------------------------------- 3172 */ 3173 0 3174 }/*-------------------------< HDATA_OUT2 >------------------*/,{ 3175 SCR_JUMP, 3176 PADDR (data_out), 3177 3178 }/*-------------------------< RESET >----------------------*/,{ 3179 /* 3180 ** Send a TARGET_RESET message if bad IDENTIFY 3181 ** received on reselection. 3182 */ 3183 SCR_LOAD_REG (scratcha, ABORT_TASK), 3184 0, 3185 SCR_JUMP, 3186 PADDRH (abort_resel), 3187 }/*-------------------------< ABORTTAG >-------------------*/,{ 3188 /* 3189 ** Abort a wrong tag received on reselection. 3190 */ 3191 SCR_LOAD_REG (scratcha, ABORT_TASK), 3192 0, 3193 SCR_JUMP, 3194 PADDRH (abort_resel), 3195 }/*-------------------------< ABORT >----------------------*/,{ 3196 /* 3197 ** Abort a reselection when no active CCB. 3198 */ 3199 SCR_LOAD_REG (scratcha, ABORT_TASK_SET), 3200 0, 3201 }/*-------------------------< ABORT_RESEL >----------------*/,{ 3202 SCR_COPY (1), 3203 RADDR (scratcha), 3204 NADDR (msgout), 3205 SCR_SET (SCR_ATN), 3206 0, 3207 SCR_CLR (SCR_ACK), 3208 0, 3209 /* 3210 ** and send it. 3211 ** we expect an immediate disconnect 3212 */ 3213 SCR_REG_REG (scntl2, SCR_AND, 0x7f), 3214 0, 3215 SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, 3216 NADDR (msgout), 3217 SCR_COPY (1), 3218 NADDR (msgout), 3219 NADDR (lastmsg), 3220 SCR_CLR (SCR_ACK|SCR_ATN), 3221 0, 3222 SCR_WAIT_DISC, 3223 0, 3224 SCR_JUMP, 3225 PADDR (start), 3226 }/*-------------------------< RESEND_IDENT >-------------------*/,{ 3227 /* 3228 ** The target stays in MSG OUT phase after having acked 3229 ** Identify [+ Tag [+ Extended message ]]. Targets shall 3230 ** behave this way on parity error. 3231 ** We must send it again all the messages. 3232 */ 3233 SCR_SET (SCR_ATN), /* Shall be asserted 2 deskew delays before the */ 3234 0, /* 1rst ACK = 90 ns. Hope the NCR is'nt too fast */ 3235 SCR_JUMP, 3236 PADDR (send_ident), 3237 }/*-------------------------< CLRATN_GO_ON >-------------------*/,{ 3238 SCR_CLR (SCR_ATN), 3239 0, 3240 SCR_JUMP, 3241 }/*-------------------------< NXTDSP_GO_ON >-------------------*/,{ 3242 0, 3243 }/*-------------------------< SDATA_IN >-------------------*/,{ 3244 SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)), 3245 PADDR (dispatch), 3246 SCR_MOVE_TBL ^ SCR_DATA_IN, 3247 offsetof (struct dsb, sense), 3248 SCR_CALL, 3249 PADDR (dispatch), 3250 SCR_JUMP, 3251 PADDR (no_data), 3252 }/*-------------------------< DATA_IO >--------------------*/,{ 3253 /* 3254 ** We jump here if the data direction was unknown at the 3255 ** time we had to queue the command to the scripts processor. 3256 ** Pointers had been set as follow in this situation: 3257 ** savep --> DATA_IO 3258 ** lastp --> start pointer when DATA_IN 3259 ** goalp --> goal pointer when DATA_IN 3260 ** wlastp --> start pointer when DATA_OUT 3261 ** wgoalp --> goal pointer when DATA_OUT 3262 ** This script sets savep/lastp/goalp according to the 3263 ** direction chosen by the target. 3264 */ 3265 SCR_JUMPR ^ IFTRUE (WHEN (SCR_DATA_OUT)), 3266 32, 3267 /* 3268 ** Direction is DATA IN. 3269 ** Warning: we jump here, even when phase is DATA OUT. 3270 */ 3271 SCR_COPY (4), 3272 NADDR (header.lastp), 3273 NADDR (header.savep), 3274 3275 /* 3276 ** Jump to the SCRIPTS according to actual direction. 3277 */ 3278 SCR_COPY (4), 3279 NADDR (header.savep), 3280 RADDR (temp), 3281 SCR_RETURN, 3282 0, 3283 /* 3284 ** Direction is DATA OUT. 3285 */ 3286 SCR_COPY (4), 3287 NADDR (header.wlastp), 3288 NADDR (header.lastp), 3289 SCR_COPY (4), 3290 NADDR (header.wgoalp), 3291 NADDR (header.goalp), 3292 SCR_JUMPR, 3293 -64, 3294 }/*-------------------------< BAD_IDENTIFY >---------------*/,{ 3295 /* 3296 ** If message phase but not an IDENTIFY, 3297 ** get some help from the C code. 3298 ** Old SCSI device may behave so. 3299 */ 3300 SCR_JUMPR ^ IFTRUE (MASK (0x80, 0x80)), 3301 16, 3302 SCR_INT, 3303 SIR_RESEL_NO_IDENTIFY, 3304 SCR_JUMP, 3305 PADDRH (reset), 3306 /* 3307 ** Message is an IDENTIFY, but lun is unknown. 3308 ** Read the message, since we got it directly 3309 ** from the SCSI BUS data lines. 3310 ** Signal problem to C code for logging the event. 3311 ** Send an ABORT_TASK_SET to clear all pending tasks. 3312 */ 3313 SCR_INT, 3314 SIR_RESEL_BAD_LUN, 3315 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 3316 NADDR (msgin), 3317 SCR_JUMP, 3318 PADDRH (abort), 3319 }/*-------------------------< BAD_I_T_L >------------------*/,{ 3320 /* 3321 ** We donnot have a task for that I_T_L. 3322 ** Signal problem to C code for logging the event. 3323 ** Send an ABORT_TASK_SET message. 3324 */ 3325 SCR_INT, 3326 SIR_RESEL_BAD_I_T_L, 3327 SCR_JUMP, 3328 PADDRH (abort), 3329 }/*-------------------------< BAD_I_T_L_Q >----------------*/,{ 3330 /* 3331 ** We donnot have a task that matches the tag. 3332 ** Signal problem to C code for logging the event. 3333 ** Send an ABORT_TASK message. 3334 */ 3335 SCR_INT, 3336 SIR_RESEL_BAD_I_T_L_Q, 3337 SCR_JUMP, 3338 PADDRH (aborttag), 3339 }/*-------------------------< BAD_TARGET >-----------------*/,{ 3340 /* 3341 ** We donnot know the target that reselected us. 3342 ** Grab the first message if any (IDENTIFY). 3343 ** Signal problem to C code for logging the event. 3344 ** TARGET_RESET message. 3345 */ 3346 SCR_INT, 3347 SIR_RESEL_BAD_TARGET, 3348 SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)), 3349 8, 3350 SCR_MOVE_ABS (1) ^ SCR_MSG_IN, 3351 NADDR (msgin), 3352 SCR_JUMP, 3353 PADDRH (reset), 3354 }/*-------------------------< BAD_STATUS >-----------------*/,{ 3355 /* 3356 ** If command resulted in either QUEUE FULL, 3357 ** CHECK CONDITION or COMMAND TERMINATED, 3358 ** call the C code. 3359 */ 3360 SCR_INT ^ IFTRUE (DATA (S_QUEUE_FULL)), 3361 SIR_BAD_STATUS, 3362 SCR_INT ^ IFTRUE (DATA (S_CHECK_COND)), 3363 SIR_BAD_STATUS, 3364 SCR_INT ^ IFTRUE (DATA (S_TERMINATED)), 3365 SIR_BAD_STATUS, 3366 SCR_RETURN, 3367 0, 3368 }/*-------------------------< START_RAM >-------------------*/,{ 3369 /* 3370 ** Load the script into on-chip RAM, 3371 ** and jump to start point. 3372 */ 3373 SCR_COPY_F (4), 3374 RADDR (scratcha), 3375 PADDRH (start_ram0), 3376 /* 3377 ** Flush script prefetch if required 3378 */ 3379 PREFETCH_FLUSH 3380 SCR_COPY (sizeof (struct script)), 3381 }/*-------------------------< START_RAM0 >--------------------*/,{ 3382 0, 3383 PADDR (start), 3384 SCR_JUMP, 3385 PADDR (start), 3386 }/*-------------------------< STO_RESTART >-------------------*/,{ 3387 /* 3388 ** 3389 ** Repair start queue (e.g. next time use the next slot) 3390 ** and jump to start point. 3391 */ 3392 SCR_COPY (4), 3393 RADDR (temp), 3394 PADDR (startpos), 3395 SCR_JUMP, 3396 PADDR (start), 3397 }/*-------------------------< WAIT_DMA >-------------------*/,{ 3398 /* 3399 ** For HP Zalon/53c720 systems, the Zalon interface 3400 ** between CPU and 53c720 does prefetches, which causes 3401 ** problems with self modifying scripts. The problem 3402 ** is overcome by calling a dummy subroutine after each 3403 ** modification, to force a refetch of the script on 3404 ** return from the subroutine. 3405 */ 3406 SCR_RETURN, 3407 0, 3408 }/*-------------------------< SNOOPTEST >-------------------*/,{ 3409 /* 3410 ** Read the variable. 3411 */ 3412 SCR_COPY (4), 3413 NADDR(ncr_cache), 3414 RADDR (scratcha), 3415 /* 3416 ** Write the variable. 3417 */ 3418 SCR_COPY (4), 3419 RADDR (temp), 3420 NADDR(ncr_cache), 3421 /* 3422 ** Read back the variable. 3423 */ 3424 SCR_COPY (4), 3425 NADDR(ncr_cache), 3426 RADDR (temp), 3427 }/*-------------------------< SNOOPEND >-------------------*/,{ 3428 /* 3429 ** And stop. 3430 */ 3431 SCR_INT, 3432 99, 3433 }/*--------------------------------------------------------*/ 3434 }; 3435 3436 /*========================================================== 3437 ** 3438 ** 3439 ** Fill in #define dependent parts of the script 3440 ** 3441 ** 3442 **========================================================== 3443 */ 3444 3445 void __init ncr_script_fill (struct script * scr, struct scripth * scrh) 3446 { 3447 int i; 3448 ncrcmd *p; 3449 3450 p = scrh->tryloop; 3451 for (i=0; i<MAX_START; i++) { 3452 *p++ =SCR_CALL; 3453 *p++ =PADDR (idle); 3454 } 3455 3456 BUG_ON((u_long)p != (u_long)&scrh->tryloop + sizeof (scrh->tryloop)); 3457 3458 #ifdef SCSI_NCR_CCB_DONE_SUPPORT 3459 3460 p = scrh->done_queue; 3461 for (i = 0; i<MAX_DONE; i++) { 3462 *p++ =SCR_COPY (sizeof(struct ccb *)); 3463 *p++ =NADDR (header.cp); 3464 *p++ =NADDR (ccb_done[i]); 3465 *p++ =SCR_CALL; 3466 *p++ =PADDR (done_end); 3467 } 3468 3469 BUG_ON((u_long)p != (u_long)&scrh->done_queue+sizeof(scrh->done_queue)); 3470 3471 #endif /* SCSI_NCR_CCB_DONE_SUPPORT */ 3472 3473 p = scrh->hdata_in; 3474 for (i=0; i<MAX_SCATTERH; i++) { 3475 *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)); 3476 *p++ =PADDR (dispatch); 3477 *p++ =SCR_MOVE_TBL ^ SCR_DATA_IN; 3478 *p++ =offsetof (struct dsb, data[i]); 3479 } 3480 3481 BUG_ON((u_long)p != (u_long)&scrh->hdata_in + sizeof (scrh->hdata_in)); 3482 3483 p = scr->data_in; 3484 for (i=MAX_SCATTERH; i<MAX_SCATTERH+MAX_SCATTERL; i++) { 3485 *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)); 3486 *p++ =PADDR (dispatch); 3487 *p++ =SCR_MOVE_TBL ^ SCR_DATA_IN; 3488 *p++ =offsetof (struct dsb, data[i]); 3489 } 3490 3491 BUG_ON((u_long)p != (u_long)&scr->data_in + sizeof (scr->data_in)); 3492 3493 p = scrh->hdata_out; 3494 for (i=0; i<MAX_SCATTERH; i++) { 3495 *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)); 3496 *p++ =PADDR (dispatch); 3497 *p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT; 3498 *p++ =offsetof (struct dsb, data[i]); 3499 } 3500 3501 BUG_ON((u_long)p != (u_long)&scrh->hdata_out + sizeof (scrh->hdata_out)); 3502 3503 p = scr->data_out; 3504 for (i=MAX_SCATTERH; i<MAX_SCATTERH+MAX_SCATTERL; i++) { 3505 *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)); 3506 *p++ =PADDR (dispatch); 3507 *p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT; 3508 *p++ =offsetof (struct dsb, data[i]); 3509 } 3510 3511 BUG_ON((u_long) p != (u_long)&scr->data_out + sizeof (scr->data_out)); 3512 } 3513 3514 /*========================================================== 3515 ** 3516 ** 3517 ** Copy and rebind a script. 3518 ** 3519 ** 3520 **========================================================== 3521 */ 3522 3523 static void __init 3524 ncr_script_copy_and_bind (struct ncb *np, ncrcmd *src, ncrcmd *dst, int len) 3525 { 3526 ncrcmd opcode, new, old, tmp1, tmp2; 3527 ncrcmd *start, *end; 3528 int relocs; 3529 int opchanged = 0; 3530 3531 start = src; 3532 end = src + len/4; 3533 3534 while (src < end) { 3535 3536 opcode = *src++; 3537 *dst++ = cpu_to_scr(opcode); 3538 3539 /* 3540 ** If we forget to change the length 3541 ** in struct script, a field will be 3542 ** padded with 0. This is an illegal 3543 ** command. 3544 */ 3545 3546 if (opcode == 0) { 3547 printk (KERN_ERR "%s: ERROR0 IN SCRIPT at %d.\n", 3548 ncr_name(np), (int) (src-start-1)); 3549 mdelay(1000); 3550 } 3551 3552 if (DEBUG_FLAGS & DEBUG_SCRIPT) 3553 printk (KERN_DEBUG "%p: <%x>\n", 3554 (src-1), (unsigned)opcode); 3555 3556 /* 3557 ** We don't have to decode ALL commands 3558 */ 3559 switch (opcode >> 28) { 3560 3561 case 0xc: 3562 /* 3563 ** COPY has TWO arguments. 3564 */ 3565 relocs = 2; 3566 tmp1 = src[0]; 3567 #ifdef RELOC_KVAR 3568 if ((tmp1 & RELOC_MASK) == RELOC_KVAR) 3569 tmp1 = 0; 3570 #endif 3571 tmp2 = src[1]; 3572 #ifdef RELOC_KVAR 3573 if ((tmp2 & RELOC_MASK) == RELOC_KVAR) 3574 tmp2 = 0; 3575 #endif 3576 if ((tmp1 ^ tmp2) & 3) { 3577 printk (KERN_ERR"%s: ERROR1 IN SCRIPT at %d.\n", 3578 ncr_name(np), (int) (src-start-1)); 3579 mdelay(1000); 3580 } 3581 /* 3582 ** If PREFETCH feature not enabled, remove 3583 ** the NO FLUSH bit if present. 3584 */ 3585 if ((opcode & SCR_NO_FLUSH) && !(np->features & FE_PFEN)) { 3586 dst[-1] = cpu_to_scr(opcode & ~SCR_NO_FLUSH); 3587 ++opchanged; 3588 } 3589 break; 3590 3591 case 0x0: 3592 /* 3593 ** MOVE (absolute address) 3594 */ 3595 relocs = 1; 3596 break; 3597 3598 case 0x8: 3599 /* 3600 ** JUMP / CALL 3601 ** don't relocate if relative :-) 3602 */ 3603 if (opcode & 0x00800000) 3604 relocs = 0; 3605 else 3606 relocs = 1; 3607 break; 3608 3609 case 0x4: 3610 case 0x5: 3611 case 0x6: 3612 case 0x7: 3613 relocs = 1; 3614 break; 3615 3616 default: 3617 relocs = 0; 3618 break; 3619 } 3620 3621 if (relocs) { 3622 while (relocs--) { 3623 old = *src++; 3624 3625 switch (old & RELOC_MASK) { 3626 case RELOC_REGISTER: 3627 new = (old & ~RELOC_MASK) + np->paddr; 3628 break; 3629 case RELOC_LABEL: 3630 new = (old & ~RELOC_MASK) + np->p_script; 3631 break; 3632 case RELOC_LABELH: 3633 new = (old & ~RELOC_MASK) + np->p_scripth; 3634 break; 3635 case RELOC_SOFTC: 3636 new = (old & ~RELOC_MASK) + np->p_ncb; 3637 break; 3638 #ifdef RELOC_KVAR 3639 case RELOC_KVAR: 3640 if (((old & ~RELOC_MASK) < 3641 SCRIPT_KVAR_FIRST) || 3642 ((old & ~RELOC_MASK) > 3643 SCRIPT_KVAR_LAST)) 3644 panic("ncr KVAR out of range"); 3645 new = vtophys(script_kvars[old & 3646 ~RELOC_MASK]); 3647 break; 3648 #endif 3649 case 0: 3650 /* Don't relocate a 0 address. */ 3651 if (old == 0) { 3652 new = old; 3653 break; 3654 } 3655 /* fall through */ 3656 default: 3657 panic("ncr_script_copy_and_bind: weird relocation %x\n", old); 3658 break; 3659 } 3660 3661 *dst++ = cpu_to_scr(new); 3662 } 3663 } else 3664 *dst++ = cpu_to_scr(*src++); 3665 3666 } 3667 } 3668 3669 /* 3670 ** Linux host data structure 3671 */ 3672 3673 struct host_data { 3674 struct ncb *ncb; 3675 }; 3676 3677 #define PRINT_ADDR(cmd, arg...) dev_info(&cmd->device->sdev_gendev , ## arg) 3678 3679 static void ncr_print_msg(struct ccb *cp, char *label, u_char *msg) 3680 { 3681 PRINT_ADDR(cp->cmd, "%s: ", label); 3682 3683 spi_print_msg(msg); 3684 printk("\n"); 3685 } 3686 3687 /*========================================================== 3688 ** 3689 ** NCR chip clock divisor table. 3690 ** Divisors are multiplied by 10,000,000 in order to make 3691 ** calculations more simple. 3692 ** 3693 **========================================================== 3694 */ 3695 3696 #define _5M 5000000 3697 static u_long div_10M[] = 3698 {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M}; 3699 3700 3701 /*=============================================================== 3702 ** 3703 ** Prepare io register values used by ncr_init() according 3704 ** to selected and supported features. 3705 ** 3706 ** NCR chips allow burst lengths of 2, 4, 8, 16, 32, 64, 128 3707 ** transfers. 32,64,128 are only supported by 875 and 895 chips. 3708 ** We use log base 2 (burst length) as internal code, with 3709 ** value 0 meaning "burst disabled". 3710 ** 3711 **=============================================================== 3712 */ 3713 3714 /* 3715 * Burst length from burst code. 3716 */ 3717 #define burst_length(bc) (!(bc))? 0 : 1 << (bc) 3718 3719 /* 3720 * Burst code from io register bits. Burst enable is ctest0 for c720 3721 */ 3722 #define burst_code(dmode, ctest0) \ 3723 (ctest0) & 0x80 ? 0 : (((dmode) & 0xc0) >> 6) + 1 3724 3725 /* 3726 * Set initial io register bits from burst code. 3727 */ 3728 static inline void ncr_init_burst(struct ncb *np, u_char bc) 3729 { 3730 u_char *be = &np->rv_ctest0; 3731 *be &= ~0x80; 3732 np->rv_dmode &= ~(0x3 << 6); 3733 np->rv_ctest5 &= ~0x4; 3734 3735 if (!bc) { 3736 *be |= 0x80; 3737 } else { 3738 --bc; 3739 np->rv_dmode |= ((bc & 0x3) << 6); 3740 np->rv_ctest5 |= (bc & 0x4); 3741 } 3742 } 3743 3744 static void __init ncr_prepare_setting(struct ncb *np) 3745 { 3746 u_char burst_max; 3747 u_long period; 3748 int i; 3749 3750 /* 3751 ** Save assumed BIOS setting 3752 */ 3753 3754 np->sv_scntl0 = INB(nc_scntl0) & 0x0a; 3755 np->sv_scntl3 = INB(nc_scntl3) & 0x07; 3756 np->sv_dmode = INB(nc_dmode) & 0xce; 3757 np->sv_dcntl = INB(nc_dcntl) & 0xa8; 3758 np->sv_ctest0 = INB(nc_ctest0) & 0x84; 3759 np->sv_ctest3 = INB(nc_ctest3) & 0x01; 3760 np->sv_ctest4 = INB(nc_ctest4) & 0x80; 3761 np->sv_ctest5 = INB(nc_ctest5) & 0x24; 3762 np->sv_gpcntl = INB(nc_gpcntl); 3763 np->sv_stest2 = INB(nc_stest2) & 0x20; 3764 np->sv_stest4 = INB(nc_stest4); 3765 3766 /* 3767 ** Wide ? 3768 */ 3769 3770 np->maxwide = (np->features & FE_WIDE)? 1 : 0; 3771 3772 /* 3773 * Guess the frequency of the chip's clock. 3774 */ 3775 if (np->features & FE_ULTRA) 3776 np->clock_khz = 80000; 3777 else 3778 np->clock_khz = 40000; 3779 3780 /* 3781 * Get the clock multiplier factor. 3782 */ 3783 if (np->features & FE_QUAD) 3784 np->multiplier = 4; 3785 else if (np->features & FE_DBLR) 3786 np->multiplier = 2; 3787 else 3788 np->multiplier = 1; 3789 3790 /* 3791 * Measure SCSI clock frequency for chips 3792 * it may vary from assumed one. 3793 */ 3794 if (np->features & FE_VARCLK) 3795 ncr_getclock(np, np->multiplier); 3796 3797 /* 3798 * Divisor to be used for async (timer pre-scaler). 3799 */ 3800 i = np->clock_divn - 1; 3801 while (--i >= 0) { 3802 if (10ul * SCSI_NCR_MIN_ASYNC * np->clock_khz > div_10M[i]) { 3803 ++i; 3804 break; 3805 } 3806 } 3807 np->rv_scntl3 = i+1; 3808 3809 /* 3810 * Minimum synchronous period factor supported by the chip. 3811 * Btw, 'period' is in tenths of nanoseconds. 3812 */ 3813 3814 period = (4 * div_10M[0] + np->clock_khz - 1) / np->clock_khz; 3815 if (period <= 250) np->minsync = 10; 3816 else if (period <= 303) np->minsync = 11; 3817 else if (period <= 500) np->minsync = 12; 3818 else np->minsync = (period + 40 - 1) / 40; 3819 3820 /* 3821 * Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2). 3822 */ 3823 3824 if (np->minsync < 25 && !(np->features & FE_ULTRA)) 3825 np->minsync = 25; 3826 3827 /* 3828 * Maximum synchronous period factor supported by the chip. 3829 */ 3830 3831 period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz); 3832 np->maxsync = period > 2540 ? 254 : period / 10; 3833 3834 /* 3835 ** Prepare initial value of other IO registers 3836 */ 3837 #if defined SCSI_NCR_TRUST_BIOS_SETTING 3838 np->rv_scntl0 = np->sv_scntl0; 3839 np->rv_dmode = np->sv_dmode; 3840 np->rv_dcntl = np->sv_dcntl; 3841 np->rv_ctest0 = np->sv_ctest0; 3842 np->rv_ctest3 = np->sv_ctest3; 3843 np->rv_ctest4 = np->sv_ctest4; 3844 np->rv_ctest5 = np->sv_ctest5; 3845 burst_max = burst_code(np->sv_dmode, np->sv_ctest0); 3846 #else 3847 3848 /* 3849 ** Select burst length (dwords) 3850 */ 3851 burst_max = driver_setup.burst_max; 3852 if (burst_max == 255) 3853 burst_max = burst_code(np->sv_dmode, np->sv_ctest0); 3854 if (burst_max > 7) 3855 burst_max = 7; 3856 if (burst_max > np->maxburst) 3857 burst_max = np->maxburst; 3858 3859 /* 3860 ** Select all supported special features 3861 */ 3862 if (np->features & FE_ERL) 3863 np->rv_dmode |= ERL; /* Enable Read Line */ 3864 if (np->features & FE_BOF) 3865 np->rv_dmode |= BOF; /* Burst Opcode Fetch */ 3866 if (np->features & FE_ERMP) 3867 np->rv_dmode |= ERMP; /* Enable Read Multiple */ 3868 if (np->features & FE_PFEN) 3869 np->rv_dcntl |= PFEN; /* Prefetch Enable */ 3870 if (np->features & FE_CLSE) 3871 np->rv_dcntl |= CLSE; /* Cache Line Size Enable */ 3872 if (np->features & FE_WRIE) 3873 np->rv_ctest3 |= WRIE; /* Write and Invalidate */ 3874 if (np->features & FE_DFS) 3875 np->rv_ctest5 |= DFS; /* Dma Fifo Size */ 3876 if (np->features & FE_MUX) 3877 np->rv_ctest4 |= MUX; /* Host bus multiplex mode */ 3878 if (np->features & FE_EA) 3879 np->rv_dcntl |= EA; /* Enable ACK */ 3880 if (np->features & FE_EHP) 3881 np->rv_ctest0 |= EHP; /* Even host parity */ 3882 3883 /* 3884 ** Select some other 3885 */ 3886 if (driver_setup.master_parity) 3887 np->rv_ctest4 |= MPEE; /* Master parity checking */ 3888 if (driver_setup.scsi_parity) 3889 np->rv_scntl0 |= 0x0a; /* full arb., ena parity, par->ATN */ 3890 3891 /* 3892 ** Get SCSI addr of host adapter (set by bios?). 3893 */ 3894 if (np->myaddr == 255) { 3895 np->myaddr = INB(nc_scid) & 0x07; 3896 if (!np->myaddr) 3897 np->myaddr = SCSI_NCR_MYADDR; 3898 } 3899 3900 #endif /* SCSI_NCR_TRUST_BIOS_SETTING */ 3901 3902 /* 3903 * Prepare initial io register bits for burst length 3904 */ 3905 ncr_init_burst(np, burst_max); 3906 3907 /* 3908 ** Set SCSI BUS mode. 3909 ** 3910 ** - ULTRA2 chips (895/895A/896) report the current 3911 ** BUS mode through the STEST4 IO register. 3912 ** - For previous generation chips (825/825A/875), 3913 ** user has to tell us how to check against HVD, 3914 ** since a 100% safe algorithm is not possible. 3915 */ 3916 np->scsi_mode = SMODE_SE; 3917 if (np->features & FE_DIFF) { 3918 switch(driver_setup.diff_support) { 3919 case 4: /* Trust previous settings if present, then GPIO3 */ 3920 if (np->sv_scntl3) { 3921 if (np->sv_stest2 & 0x20) 3922 np->scsi_mode = SMODE_HVD; 3923 break; 3924 } 3925 case 3: /* SYMBIOS controllers report HVD through GPIO3 */ 3926 if (INB(nc_gpreg) & 0x08) 3927 break; 3928 case 2: /* Set HVD unconditionally */ 3929 np->scsi_mode = SMODE_HVD; 3930 case 1: /* Trust previous settings for HVD */ 3931 if (np->sv_stest2 & 0x20) 3932 np->scsi_mode = SMODE_HVD; 3933 break; 3934 default:/* Don't care about HVD */ 3935 break; 3936 } 3937 } 3938 if (np->scsi_mode == SMODE_HVD) 3939 np->rv_stest2 |= 0x20; 3940 3941 /* 3942 ** Set LED support from SCRIPTS. 3943 ** Ignore this feature for boards known to use a 3944 ** specific GPIO wiring and for the 895A or 896 3945 ** that drive the LED directly. 3946 ** Also probe initial setting of GPIO0 as output. 3947 */ 3948 if ((driver_setup.led_pin) && 3949 !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01)) 3950 np->features |= FE_LED0; 3951 3952 /* 3953 ** Set irq mode. 3954 */ 3955 switch(driver_setup.irqm & 3) { 3956 case 2: 3957 np->rv_dcntl |= IRQM; 3958 break; 3959 case 1: 3960 np->rv_dcntl |= (np->sv_dcntl & IRQM); 3961 break; 3962 default: 3963 break; 3964 } 3965 3966 /* 3967 ** Configure targets according to driver setup. 3968 ** Allow to override sync, wide and NOSCAN from 3969 ** boot command line. 3970 */ 3971 for (i = 0 ; i < MAX_TARGET ; i++) { 3972 struct tcb *tp = &np->target[i]; 3973 3974 tp->usrsync = driver_setup.default_sync; 3975 tp->usrwide = driver_setup.max_wide; 3976 tp->usrtags = MAX_TAGS; 3977 tp->period = 0xffff; 3978 if (!driver_setup.disconnection) 3979 np->target[i].usrflag = UF_NODISC; 3980 } 3981 3982 /* 3983 ** Announce all that stuff to user. 3984 */ 3985 3986 printk(KERN_INFO "%s: ID %d, Fast-%d%s%s\n", ncr_name(np), 3987 np->myaddr, 3988 np->minsync < 12 ? 40 : (np->minsync < 25 ? 20 : 10), 3989 (np->rv_scntl0 & 0xa) ? ", Parity Checking" : ", NO Parity", 3990 (np->rv_stest2 & 0x20) ? ", Differential" : ""); 3991 3992 if (bootverbose > 1) { 3993 printk (KERN_INFO "%s: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = " 3994 "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n", 3995 ncr_name(np), np->sv_scntl3, np->sv_dmode, np->sv_dcntl, 3996 np->sv_ctest3, np->sv_ctest4, np->sv_ctest5); 3997 3998 printk (KERN_INFO "%s: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = " 3999 "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n", 4000 ncr_name(np), np->rv_scntl3, np->rv_dmode, np->rv_dcntl, 4001 np->rv_ctest3, np->rv_ctest4, np->rv_ctest5); 4002 } 4003 4004 if (bootverbose && np->paddr2) 4005 printk (KERN_INFO "%s: on-chip RAM at 0x%lx\n", 4006 ncr_name(np), np->paddr2); 4007 } 4008 4009 /*========================================================== 4010 ** 4011 ** 4012 ** Done SCSI commands list management. 4013 ** 4014 ** We donnot enter the scsi_done() callback immediately 4015 ** after a command has been seen as completed but we 4016 ** insert it into a list which is flushed outside any kind 4017 ** of driver critical section. 4018 ** This allows to do minimal stuff under interrupt and 4019 ** inside critical sections and to also avoid locking up 4020 ** on recursive calls to driver entry points under SMP. 4021 ** In fact, the only kernel point which is entered by the 4022 ** driver with a driver lock set is kmalloc(GFP_ATOMIC) 4023 ** that shall not reenter the driver under any circumstances, 4024 ** AFAIK. 4025 ** 4026 **========================================================== 4027 */ 4028 static inline void ncr_queue_done_cmd(struct ncb *np, struct scsi_cmnd *cmd) 4029 { 4030 unmap_scsi_data(np, cmd); 4031 cmd->host_scribble = (char *) np->done_list; 4032 np->done_list = cmd; 4033 } 4034 4035 static inline void ncr_flush_done_cmds(struct scsi_cmnd *lcmd) 4036 { 4037 struct scsi_cmnd *cmd; 4038 4039 while (lcmd) { 4040 cmd = lcmd; 4041 lcmd = (struct scsi_cmnd *) cmd->host_scribble; 4042 cmd->scsi_done(cmd); 4043 } 4044 } 4045 4046 /*========================================================== 4047 ** 4048 ** 4049 ** Prepare the next negotiation message if needed. 4050 ** 4051 ** Fill in the part of message buffer that contains the 4052 ** negotiation and the nego_status field of the CCB. 4053 ** Returns the size of the message in bytes. 4054 ** 4055 ** 4056 **========================================================== 4057 */ 4058 4059 4060 static int ncr_prepare_nego(struct ncb *np, struct ccb *cp, u_char *msgptr) 4061 { 4062 struct tcb *tp = &np->target[cp->target]; 4063 int msglen = 0; 4064 int nego = 0; 4065 struct scsi_target *starget = tp->starget; 4066 4067 /* negotiate wide transfers ? */ 4068 if (!tp->widedone) { 4069 if (spi_support_wide(starget)) { 4070 nego = NS_WIDE; 4071 } else 4072 tp->widedone=1; 4073 } 4074 4075 /* negotiate synchronous transfers? */ 4076 if (!nego && !tp->period) { 4077 if (spi_support_sync(starget)) { 4078 nego = NS_SYNC; 4079 } else { 4080 tp->period =0xffff; 4081 dev_info(&starget->dev, "target did not report SYNC.\n"); 4082 } 4083 } 4084 4085 switch (nego) { 4086 case NS_SYNC: 4087 msglen += spi_populate_sync_msg(msgptr + msglen, 4088 tp->maxoffs ? tp->minsync : 0, tp->maxoffs); 4089 break; 4090 case NS_WIDE: 4091 msglen += spi_populate_width_msg(msgptr + msglen, tp->usrwide); 4092 break; 4093 } 4094 4095 cp->nego_status = nego; 4096 4097 if (nego) { 4098 tp->nego_cp = cp; 4099 if (DEBUG_FLAGS & DEBUG_NEGO) { 4100 ncr_print_msg(cp, nego == NS_WIDE ? 4101 "wide msgout":"sync_msgout", msgptr); 4102 } 4103 } 4104 4105 return msglen; 4106 } 4107 4108 4109 4110 /*========================================================== 4111 ** 4112 ** 4113 ** Start execution of a SCSI command. 4114 ** This is called from the generic SCSI driver. 4115 ** 4116 ** 4117 **========================================================== 4118 */ 4119 static int ncr_queue_command (struct ncb *np, struct scsi_cmnd *cmd) 4120 { 4121 struct scsi_device *sdev = cmd->device; 4122 struct tcb *tp = &np->target[sdev->id]; 4123 struct lcb *lp = tp->lp[sdev->lun]; 4124 struct ccb *cp; 4125 4126 int segments; 4127 u_char idmsg, *msgptr; 4128 u32 msglen; 4129 int direction; 4130 u32 lastp, goalp; 4131 4132 /*--------------------------------------------- 4133 ** 4134 ** Some shortcuts ... 4135 ** 4136 **--------------------------------------------- 4137 */ 4138 if ((sdev->id == np->myaddr ) || 4139 (sdev->id >= MAX_TARGET) || 4140 (sdev->lun >= MAX_LUN )) { 4141 return(DID_BAD_TARGET); 4142 } 4143 4144 /*--------------------------------------------- 4145 ** 4146 ** Complete the 1st TEST UNIT READY command 4147 ** with error condition if the device is 4148 ** flagged NOSCAN, in order to speed up 4149 ** the boot. 4150 ** 4151 **--------------------------------------------- 4152 */ 4153 if ((cmd->cmnd[0] == 0 || cmd->cmnd[0] == 0x12) && 4154 (tp->usrflag & UF_NOSCAN)) { 4155 tp->usrflag &= ~UF_NOSCAN; 4156 return DID_BAD_TARGET; 4157 } 4158 4159 if (DEBUG_FLAGS & DEBUG_TINY) { 4160 PRINT_ADDR(cmd, "CMD=%x ", cmd->cmnd[0]); 4161 } 4162 4163 /*--------------------------------------------------- 4164 ** 4165 ** Assign a ccb / bind cmd. 4166 ** If resetting, shorten settle_time if necessary 4167 ** in order to avoid spurious timeouts. 4168 ** If resetting or no free ccb, 4169 ** insert cmd into the waiting list. 4170 ** 4171 **---------------------------------------------------- 4172 */ 4173 if (np->settle_time && cmd->request->timeout >= HZ) { 4174 u_long tlimit = jiffies + cmd->request->timeout - HZ; 4175 if (time_after(np->settle_time, tlimit)) 4176 np->settle_time = tlimit; 4177 } 4178 4179 if (np->settle_time || !(cp=ncr_get_ccb (np, cmd))) { 4180 insert_into_waiting_list(np, cmd); 4181 return(DID_OK); 4182 } 4183 cp->cmd = cmd; 4184 4185 /*---------------------------------------------------- 4186 ** 4187 ** Build the identify / tag / sdtr message 4188 ** 4189 **---------------------------------------------------- 4190 */ 4191 4192 idmsg = IDENTIFY(0, sdev->lun); 4193 4194 if (cp ->tag != NO_TAG || 4195 (cp != np->ccb && np->disc && !(tp->usrflag & UF_NODISC))) 4196 idmsg |= 0x40; 4197 4198 msgptr = cp->scsi_smsg; 4199 msglen = 0; 4200 msgptr[msglen++] = idmsg; 4201 4202 if (cp->tag != NO_TAG) { 4203 char order = np->order; 4204 4205 /* 4206 ** Force ordered tag if necessary to avoid timeouts 4207 ** and to preserve interactivity. 4208 */ 4209 if (lp && time_after(jiffies, lp->tags_stime)) { 4210 if (lp->tags_smap) { 4211 order = ORDERED_QUEUE_TAG; 4212 if ((DEBUG_FLAGS & DEBUG_TAGS)||bootverbose>2){ 4213 PRINT_ADDR(cmd, 4214 "ordered tag forced.\n"); 4215 } 4216 } 4217 lp->tags_stime = jiffies + 3*HZ; 4218 lp->tags_smap = lp->tags_umap; 4219 } 4220 4221 if (order == 0) { 4222 /* 4223 ** Ordered write ops, unordered read ops. 4224 */ 4225 switch (cmd->cmnd[0]) { 4226 case 0x08: /* READ_SMALL (6) */ 4227 case 0x28: /* READ_BIG (10) */ 4228 case 0xa8: /* READ_HUGE (12) */ 4229 order = SIMPLE_QUEUE_TAG; 4230 break; 4231 default: 4232 order = ORDERED_QUEUE_TAG; 4233 } 4234 } 4235 msgptr[msglen++] = order; 4236 /* 4237 ** Actual tags are numbered 1,3,5,..2*MAXTAGS+1, 4238 ** since we may have to deal with devices that have 4239 ** problems with #TAG 0 or too great #TAG numbers. 4240 */ 4241 msgptr[msglen++] = (cp->tag << 1) + 1; 4242 } 4243 4244 /*---------------------------------------------------- 4245 ** 4246 ** Build the data descriptors 4247 ** 4248 **---------------------------------------------------- 4249 */ 4250 4251 direction = cmd->sc_data_direction; 4252 if (direction != DMA_NONE) { 4253 segments = ncr_scatter(np, cp, cp->cmd); 4254 if (segments < 0) { 4255 ncr_free_ccb(np, cp); 4256 return(DID_ERROR); 4257 } 4258 } 4259 else { 4260 cp->data_len = 0; 4261 segments = 0; 4262 } 4263 4264 /*--------------------------------------------------- 4265 ** 4266 ** negotiation required? 4267 ** 4268 ** (nego_status is filled by ncr_prepare_nego()) 4269 ** 4270 **--------------------------------------------------- 4271 */ 4272 4273 cp->nego_status = 0; 4274 4275 if ((!tp->widedone || !tp->period) && !tp->nego_cp && lp) { 4276 msglen += ncr_prepare_nego (np, cp, msgptr + msglen); 4277 } 4278 4279 /*---------------------------------------------------- 4280 ** 4281 ** Determine xfer direction. 4282 ** 4283 **---------------------------------------------------- 4284 */ 4285 if (!cp->data_len) 4286 direction = DMA_NONE; 4287 4288 /* 4289 ** If data direction is BIDIRECTIONAL, speculate FROM_DEVICE 4290 ** but prepare alternate pointers for TO_DEVICE in case 4291 ** of our speculation will be just wrong. 4292 ** SCRIPTS will swap values if needed. 4293 */ 4294 switch(direction) { 4295 case DMA_BIDIRECTIONAL: 4296 case DMA_TO_DEVICE: 4297 goalp = NCB_SCRIPT_PHYS (np, data_out2) + 8; 4298 if (segments <= MAX_SCATTERL) 4299 lastp = goalp - 8 - (segments * 16); 4300 else { 4301 lastp = NCB_SCRIPTH_PHYS (np, hdata_out2); 4302 lastp -= (segments - MAX_SCATTERL) * 16; 4303 } 4304 if (direction != DMA_BIDIRECTIONAL) 4305 break; 4306 cp->phys.header.wgoalp = cpu_to_scr(goalp); 4307 cp->phys.header.wlastp = cpu_to_scr(lastp); 4308 /* fall through */ 4309 case DMA_FROM_DEVICE: 4310 goalp = NCB_SCRIPT_PHYS (np, data_in2) + 8; 4311 if (segments <= MAX_SCATTERL) 4312 lastp = goalp - 8 - (segments * 16); 4313 else { 4314 lastp = NCB_SCRIPTH_PHYS (np, hdata_in2); 4315 lastp -= (segments - MAX_SCATTERL) * 16; 4316 } 4317 break; 4318 default: 4319 case DMA_NONE: 4320 lastp = goalp = NCB_SCRIPT_PHYS (np, no_data); 4321 break; 4322 } 4323 4324 /* 4325 ** Set all pointers values needed by SCRIPTS. 4326 ** If direction is unknown, start at data_io. 4327 */ 4328 cp->phys.header.lastp = cpu_to_scr(lastp); 4329 cp->phys.header.goalp = cpu_to_scr(goalp); 4330 4331 if (direction == DMA_BIDIRECTIONAL) 4332 cp->phys.header.savep = 4333 cpu_to_scr(NCB_SCRIPTH_PHYS (np, data_io)); 4334 else 4335 cp->phys.header.savep= cpu_to_scr(lastp); 4336 4337 /* 4338 ** Save the initial data pointer in order to be able 4339 ** to redo the command. 4340 */ 4341 cp->startp = cp->phys.header.savep; 4342 4343 /*---------------------------------------------------- 4344 ** 4345 ** fill in ccb 4346 ** 4347 **---------------------------------------------------- 4348 ** 4349 ** 4350 ** physical -> virtual backlink 4351 ** Generic SCSI command 4352 */ 4353 4354 /* 4355 ** Startqueue 4356 */ 4357 cp->start.schedule.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, select)); 4358 cp->restart.schedule.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, resel_dsa)); 4359 /* 4360 ** select 4361 */ 4362 cp->phys.select.sel_id = sdev_id(sdev); 4363 cp->phys.select.sel_scntl3 = tp->wval; 4364 cp->phys.select.sel_sxfer = tp->sval; 4365 /* 4366 ** message 4367 */ 4368 cp->phys.smsg.addr = cpu_to_scr(CCB_PHYS (cp, scsi_smsg)); 4369 cp->phys.smsg.size = cpu_to_scr(msglen); 4370 4371 /* 4372 ** command 4373 */ 4374 memcpy(cp->cdb_buf, cmd->cmnd, min_t(int, cmd->cmd_len, sizeof(cp->cdb_buf))); 4375 cp->phys.cmd.addr = cpu_to_scr(CCB_PHYS (cp, cdb_buf[0])); 4376 cp->phys.cmd.size = cpu_to_scr(cmd->cmd_len); 4377 4378 /* 4379 ** status 4380 */ 4381 cp->actualquirks = 0; 4382 cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY; 4383 cp->scsi_status = S_ILLEGAL; 4384 cp->parity_status = 0; 4385 4386 cp->xerr_status = XE_OK; 4387 #if 0 4388 cp->sync_status = tp->sval; 4389 cp->wide_status = tp->wval; 4390 #endif 4391 4392 /*---------------------------------------------------- 4393 ** 4394 ** Critical region: start this job. 4395 ** 4396 **---------------------------------------------------- 4397 */ 4398 4399 /* activate this job. */ 4400 cp->magic = CCB_MAGIC; 4401 4402 /* 4403 ** insert next CCBs into start queue. 4404 ** 2 max at a time is enough to flush the CCB wait queue. 4405 */ 4406 cp->auto_sense = 0; 4407 if (lp) 4408 ncr_start_next_ccb(np, lp, 2); 4409 else 4410 ncr_put_start_queue(np, cp); 4411 4412 /* Command is successfully queued. */ 4413 4414 return DID_OK; 4415 } 4416 4417 4418 /*========================================================== 4419 ** 4420 ** 4421 ** Insert a CCB into the start queue and wake up the 4422 ** SCRIPTS processor. 4423 ** 4424 ** 4425 **========================================================== 4426 */ 4427 4428 static void ncr_start_next_ccb(struct ncb *np, struct lcb *lp, int maxn) 4429 { 4430 struct list_head *qp; 4431 struct ccb *cp; 4432 4433 if (lp->held_ccb) 4434 return; 4435 4436 while (maxn-- && lp->queuedccbs < lp->queuedepth) { 4437 qp = ncr_list_pop(&lp->wait_ccbq); 4438 if (!qp) 4439 break; 4440 ++lp->queuedccbs; 4441 cp = list_entry(qp, struct ccb, link_ccbq); 4442 list_add_tail(qp, &lp->busy_ccbq); 4443 lp->jump_ccb[cp->tag == NO_TAG ? 0 : cp->tag] = 4444 cpu_to_scr(CCB_PHYS (cp, restart)); 4445 ncr_put_start_queue(np, cp); 4446 } 4447 } 4448 4449 static void ncr_put_start_queue(struct ncb *np, struct ccb *cp) 4450 { 4451 u16 qidx; 4452 4453 /* 4454 ** insert into start queue. 4455 */ 4456 if (!np->squeueput) np->squeueput = 1; 4457 qidx = np->squeueput + 2; 4458 if (qidx >= MAX_START + MAX_START) qidx = 1; 4459 4460 np->scripth->tryloop [qidx] = cpu_to_scr(NCB_SCRIPT_PHYS (np, idle)); 4461 MEMORY_BARRIER(); 4462 np->scripth->tryloop [np->squeueput] = cpu_to_scr(CCB_PHYS (cp, start)); 4463 4464 np->squeueput = qidx; 4465 ++np->queuedccbs; 4466 cp->queued = 1; 4467 4468 if (DEBUG_FLAGS & DEBUG_QUEUE) 4469 printk ("%s: queuepos=%d.\n", ncr_name (np), np->squeueput); 4470 4471 /* 4472 ** Script processor may be waiting for reselect. 4473 ** Wake it up. 4474 */ 4475 MEMORY_BARRIER(); 4476 OUTB (nc_istat, SIGP); 4477 } 4478 4479 4480 static int ncr_reset_scsi_bus(struct ncb *np, int enab_int, int settle_delay) 4481 { 4482 u32 term; 4483 int retv = 0; 4484 4485 np->settle_time = jiffies + settle_delay * HZ; 4486 4487 if (bootverbose > 1) 4488 printk("%s: resetting, " 4489 "command processing suspended for %d seconds\n", 4490 ncr_name(np), settle_delay); 4491 4492 ncr_chip_reset(np, 100); 4493 udelay(2000); /* The 895 needs time for the bus mode to settle */ 4494 if (enab_int) 4495 OUTW (nc_sien, RST); 4496 /* 4497 ** Enable Tolerant, reset IRQD if present and 4498 ** properly set IRQ mode, prior to resetting the bus. 4499 */ 4500 OUTB (nc_stest3, TE); 4501 OUTB (nc_scntl1, CRST); 4502 udelay(200); 4503 4504 if (!driver_setup.bus_check) 4505 goto out; 4506 /* 4507 ** Check for no terminators or SCSI bus shorts to ground. 4508 ** Read SCSI data bus, data parity bits and control signals. 4509 ** We are expecting RESET to be TRUE and other signals to be 4510 ** FALSE. 4511 */ 4512 4513 term = INB(nc_sstat0); 4514 term = ((term & 2) << 7) + ((term & 1) << 17); /* rst sdp0 */ 4515 term |= ((INB(nc_sstat2) & 0x01) << 26) | /* sdp1 */ 4516 ((INW(nc_sbdl) & 0xff) << 9) | /* d7-0 */ 4517 ((INW(nc_sbdl) & 0xff00) << 10) | /* d15-8 */ 4518 INB(nc_sbcl); /* req ack bsy sel atn msg cd io */ 4519 4520 if (!(np->features & FE_WIDE)) 4521 term &= 0x3ffff; 4522 4523 if (term != (2<<7)) { 4524 printk("%s: suspicious SCSI data while resetting the BUS.\n", 4525 ncr_name(np)); 4526 printk("%s: %sdp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = " 4527 "0x%lx, expecting 0x%lx\n", 4528 ncr_name(np), 4529 (np->features & FE_WIDE) ? "dp1,d15-8," : "", 4530 (u_long)term, (u_long)(2<<7)); 4531 if (driver_setup.bus_check == 1) 4532 retv = 1; 4533 } 4534 out: 4535 OUTB (nc_scntl1, 0); 4536 return retv; 4537 } 4538 4539 /* 4540 * Start reset process. 4541 * If reset in progress do nothing. 4542 * The interrupt handler will reinitialize the chip. 4543 * The timeout handler will wait for settle_time before 4544 * clearing it and so resuming command processing. 4545 */ 4546 static void ncr_start_reset(struct ncb *np) 4547 { 4548 if (!np->settle_time) { 4549 ncr_reset_scsi_bus(np, 1, driver_setup.settle_delay); 4550 } 4551 } 4552 4553 /*========================================================== 4554 ** 4555 ** 4556 ** Reset the SCSI BUS. 4557 ** This is called from the generic SCSI driver. 4558 ** 4559 ** 4560 **========================================================== 4561 */ 4562 static int ncr_reset_bus (struct ncb *np, struct scsi_cmnd *cmd, int sync_reset) 4563 { 4564 /* struct scsi_device *device = cmd->device; */ 4565 struct ccb *cp; 4566 int found; 4567 4568 /* 4569 * Return immediately if reset is in progress. 4570 */ 4571 if (np->settle_time) { 4572 return FAILED; 4573 } 4574 /* 4575 * Start the reset process. 4576 * The script processor is then assumed to be stopped. 4577 * Commands will now be queued in the waiting list until a settle 4578 * delay of 2 seconds will be completed. 4579 */ 4580 ncr_start_reset(np); 4581 /* 4582 * First, look in the wakeup list 4583 */ 4584 for (found=0, cp=np->ccb; cp; cp=cp->link_ccb) { 4585 /* 4586 ** look for the ccb of this command. 4587 */ 4588 if (cp->host_status == HS_IDLE) continue; 4589 if (cp->cmd == cmd) { 4590 found = 1; 4591 break; 4592 } 4593 } 4594 /* 4595 * Then, look in the waiting list 4596 */ 4597 if (!found && retrieve_from_waiting_list(0, np, cmd)) 4598 found = 1; 4599 /* 4600 * Wake-up all awaiting commands with DID_RESET. 4601 */ 4602 reset_waiting_list(np); 4603 /* 4604 * Wake-up all pending commands with HS_RESET -> DID_RESET. 4605 */ 4606 ncr_wakeup(np, HS_RESET); 4607 /* 4608 * If the involved command was not in a driver queue, and the 4609 * scsi driver told us reset is synchronous, and the command is not 4610 * currently in the waiting list, complete it with DID_RESET status, 4611 * in order to keep it alive. 4612 */ 4613 if (!found && sync_reset && !retrieve_from_waiting_list(0, np, cmd)) { 4614 cmd->result = ScsiResult(DID_RESET, 0); 4615 ncr_queue_done_cmd(np, cmd); 4616 } 4617 4618 return SUCCESS; 4619 } 4620 4621 #if 0 /* unused and broken.. */ 4622 /*========================================================== 4623 ** 4624 ** 4625 ** Abort an SCSI command. 4626 ** This is called from the generic SCSI driver. 4627 ** 4628 ** 4629 **========================================================== 4630 */ 4631 static int ncr_abort_command (struct ncb *np, struct scsi_cmnd *cmd) 4632 { 4633 /* struct scsi_device *device = cmd->device; */ 4634 struct ccb *cp; 4635 int found; 4636 int retv; 4637 4638 /* 4639 * First, look for the scsi command in the waiting list 4640 */ 4641 if (remove_from_waiting_list(np, cmd)) { 4642 cmd->result = ScsiResult(DID_ABORT, 0); 4643 ncr_queue_done_cmd(np, cmd); 4644 return SCSI_ABORT_SUCCESS; 4645 } 4646 4647 /* 4648 * Then, look in the wakeup list 4649 */ 4650 for (found=0, cp=np->ccb; cp; cp=cp->link_ccb) { 4651 /* 4652 ** look for the ccb of this command. 4653 */ 4654 if (cp->host_status == HS_IDLE) continue; 4655 if (cp->cmd == cmd) { 4656 found = 1; 4657 break; 4658 } 4659 } 4660 4661 if (!found) { 4662 return SCSI_ABORT_NOT_RUNNING; 4663 } 4664 4665 if (np->settle_time) { 4666 return SCSI_ABORT_SNOOZE; 4667 } 4668 4669 /* 4670 ** If the CCB is active, patch schedule jumps for the 4671 ** script to abort the command. 4672 */ 4673 4674 switch(cp->host_status) { 4675 case HS_BUSY: 4676 case HS_NEGOTIATE: 4677 printk ("%s: abort ccb=%p (cancel)\n", ncr_name (np), cp); 4678 cp->start.schedule.l_paddr = 4679 cpu_to_scr(NCB_SCRIPTH_PHYS (np, cancel)); 4680 retv = SCSI_ABORT_PENDING; 4681 break; 4682 case HS_DISCONNECT: 4683 cp->restart.schedule.l_paddr = 4684 cpu_to_scr(NCB_SCRIPTH_PHYS (np, abort)); 4685 retv = SCSI_ABORT_PENDING; 4686 break; 4687 default: 4688 retv = SCSI_ABORT_NOT_RUNNING; 4689 break; 4690 4691 } 4692 4693 /* 4694 ** If there are no requests, the script 4695 ** processor will sleep on SEL_WAIT_RESEL. 4696 ** Let's wake it up, since it may have to work. 4697 */ 4698 OUTB (nc_istat, SIGP); 4699 4700 return retv; 4701 } 4702 #endif 4703 4704 static void ncr_detach(struct ncb *np) 4705 { 4706 struct ccb *cp; 4707 struct tcb *tp; 4708 struct lcb *lp; 4709 int target, lun; 4710 int i; 4711 char inst_name[16]; 4712 4713 /* Local copy so we don't access np after freeing it! */ 4714 strlcpy(inst_name, ncr_name(np), sizeof(inst_name)); 4715 4716 printk("%s: releasing host resources\n", ncr_name(np)); 4717 4718 /* 4719 ** Stop the ncr_timeout process 4720 ** Set release_stage to 1 and wait that ncr_timeout() set it to 2. 4721 */ 4722 4723 #ifdef DEBUG_NCR53C8XX 4724 printk("%s: stopping the timer\n", ncr_name(np)); 4725 #endif 4726 np->release_stage = 1; 4727 for (i = 50 ; i && np->release_stage != 2 ; i--) 4728 mdelay(100); 4729 if (np->release_stage != 2) 4730 printk("%s: the timer seems to be already stopped\n", ncr_name(np)); 4731 else np->release_stage = 2; 4732 4733 /* 4734 ** Disable chip interrupts 4735 */ 4736 4737 #ifdef DEBUG_NCR53C8XX 4738 printk("%s: disabling chip interrupts\n", ncr_name(np)); 4739 #endif 4740 OUTW (nc_sien , 0); 4741 OUTB (nc_dien , 0); 4742 4743 /* 4744 ** Reset NCR chip 4745 ** Restore bios setting for automatic clock detection. 4746 */ 4747 4748 printk("%s: resetting chip\n", ncr_name(np)); 4749 ncr_chip_reset(np, 100); 4750 4751 OUTB(nc_dmode, np->sv_dmode); 4752 OUTB(nc_dcntl, np->sv_dcntl); 4753 OUTB(nc_ctest0, np->sv_ctest0); 4754 OUTB(nc_ctest3, np->sv_ctest3); 4755 OUTB(nc_ctest4, np->sv_ctest4); 4756 OUTB(nc_ctest5, np->sv_ctest5); 4757 OUTB(nc_gpcntl, np->sv_gpcntl); 4758 OUTB(nc_stest2, np->sv_stest2); 4759 4760 ncr_selectclock(np, np->sv_scntl3); 4761 4762 /* 4763 ** Free allocated ccb(s) 4764 */ 4765 4766 while ((cp=np->ccb->link_ccb) != NULL) { 4767 np->ccb->link_ccb = cp->link_ccb; 4768 if (cp->host_status) { 4769 printk("%s: shall free an active ccb (host_status=%d)\n", 4770 ncr_name(np), cp->host_status); 4771 } 4772 #ifdef DEBUG_NCR53C8XX 4773 printk("%s: freeing ccb (%lx)\n", ncr_name(np), (u_long) cp); 4774 #endif 4775 m_free_dma(cp, sizeof(*cp), "CCB"); 4776 } 4777 4778 /* Free allocated tp(s) */ 4779 4780 for (target = 0; target < MAX_TARGET ; target++) { 4781 tp=&np->target[target]; 4782 for (lun = 0 ; lun < MAX_LUN ; lun++) { 4783 lp = tp->lp[lun]; 4784 if (lp) { 4785 #ifdef DEBUG_NCR53C8XX 4786 printk("%s: freeing lp (%lx)\n", ncr_name(np), (u_long) lp); 4787 #endif 4788 if (lp->jump_ccb != &lp->jump_ccb_0) 4789 m_free_dma(lp->jump_ccb,256,"JUMP_CCB"); 4790 m_free_dma(lp, sizeof(*lp), "LCB"); 4791 } 4792 } 4793 } 4794 4795 if (np->scripth0) 4796 m_free_dma(np->scripth0, sizeof(struct scripth), "SCRIPTH"); 4797 if (np->script0) 4798 m_free_dma(np->script0, sizeof(struct script), "SCRIPT"); 4799 if (np->ccb) 4800 m_free_dma(np->ccb, sizeof(struct ccb), "CCB"); 4801 m_free_dma(np, sizeof(struct ncb), "NCB"); 4802 4803 printk("%s: host resources successfully released\n", inst_name); 4804 } 4805 4806 /*========================================================== 4807 ** 4808 ** 4809 ** Complete execution of a SCSI command. 4810 ** Signal completion to the generic SCSI driver. 4811 ** 4812 ** 4813 **========================================================== 4814 */ 4815 4816 void ncr_complete (struct ncb *np, struct ccb *cp) 4817 { 4818 struct scsi_cmnd *cmd; 4819 struct tcb *tp; 4820 struct lcb *lp; 4821 4822 /* 4823 ** Sanity check 4824 */ 4825 4826 if (!cp || cp->magic != CCB_MAGIC || !cp->cmd) 4827 return; 4828 4829 /* 4830 ** Print minimal debug information. 4831 */ 4832 4833 if (DEBUG_FLAGS & DEBUG_TINY) 4834 printk ("CCB=%lx STAT=%x/%x\n", (unsigned long)cp, 4835 cp->host_status,cp->scsi_status); 4836 4837 /* 4838 ** Get command, target and lun pointers. 4839 */ 4840 4841 cmd = cp->cmd; 4842 cp->cmd = NULL; 4843 tp = &np->target[cmd->device->id]; 4844 lp = tp->lp[cmd->device->lun]; 4845 4846 /* 4847 ** We donnot queue more than 1 ccb per target 4848 ** with negotiation at any time. If this ccb was 4849 ** used for negotiation, clear this info in the tcb. 4850 */ 4851 4852 if (cp == tp->nego_cp) 4853 tp->nego_cp = NULL; 4854 4855 /* 4856 ** If auto-sense performed, change scsi status. 4857 */ 4858 if (cp->auto_sense) { 4859 cp->scsi_status = cp->auto_sense; 4860 } 4861 4862 /* 4863 ** If we were recovering from queue full or performing 4864 ** auto-sense, requeue skipped CCBs to the wait queue. 4865 */ 4866 4867 if (lp && lp->held_ccb) { 4868 if (cp == lp->held_ccb) { 4869 list_splice_init(&lp->skip_ccbq, &lp->wait_ccbq); 4870 lp->held_ccb = NULL; 4871 } 4872 } 4873 4874 /* 4875 ** Check for parity errors. 4876 */ 4877 4878 if (cp->parity_status > 1) { 4879 PRINT_ADDR(cmd, "%d parity error(s).\n",cp->parity_status); 4880 } 4881 4882 /* 4883 ** Check for extended errors. 4884 */ 4885 4886 if (cp->xerr_status != XE_OK) { 4887 switch (cp->xerr_status) { 4888 case XE_EXTRA_DATA: 4889 PRINT_ADDR(cmd, "extraneous data discarded.\n"); 4890 break; 4891 case XE_BAD_PHASE: 4892 PRINT_ADDR(cmd, "invalid scsi phase (4/5).\n"); 4893 break; 4894 default: 4895 PRINT_ADDR(cmd, "extended error %d.\n", 4896 cp->xerr_status); 4897 break; 4898 } 4899 if (cp->host_status==HS_COMPLETE) 4900 cp->host_status = HS_FAIL; 4901 } 4902 4903 /* 4904 ** Print out any error for debugging purpose. 4905 */ 4906 if (DEBUG_FLAGS & (DEBUG_RESULT|DEBUG_TINY)) { 4907 if (cp->host_status!=HS_COMPLETE || cp->scsi_status!=S_GOOD) { 4908 PRINT_ADDR(cmd, "ERROR: cmd=%x host_status=%x " 4909 "scsi_status=%x\n", cmd->cmnd[0], 4910 cp->host_status, cp->scsi_status); 4911 } 4912 } 4913 4914 /* 4915 ** Check the status. 4916 */ 4917 if ( (cp->host_status == HS_COMPLETE) 4918 && (cp->scsi_status == S_GOOD || 4919 cp->scsi_status == S_COND_MET)) { 4920 /* 4921 * All went well (GOOD status). 4922 * CONDITION MET status is returned on 4923 * `Pre-Fetch' or `Search data' success. 4924 */ 4925 cmd->result = ScsiResult(DID_OK, cp->scsi_status); 4926 4927 /* 4928 ** @RESID@ 4929 ** Could dig out the correct value for resid, 4930 ** but it would be quite complicated. 4931 */ 4932 /* if (cp->phys.header.lastp != cp->phys.header.goalp) */ 4933 4934 /* 4935 ** Allocate the lcb if not yet. 4936 */ 4937 if (!lp) 4938 ncr_alloc_lcb (np, cmd->device->id, cmd->device->lun); 4939 4940 tp->bytes += cp->data_len; 4941 tp->transfers ++; 4942 4943 /* 4944 ** If tags was reduced due to queue full, 4945 ** increase tags if 1000 good status received. 4946 */ 4947 if (lp && lp->usetags && lp->numtags < lp->maxtags) { 4948 ++lp->num_good; 4949 if (lp->num_good >= 1000) { 4950 lp->num_good = 0; 4951 ++lp->numtags; 4952 ncr_setup_tags (np, cmd->device); 4953 } 4954 } 4955 } else if ((cp->host_status == HS_COMPLETE) 4956 && (cp->scsi_status == S_CHECK_COND)) { 4957 /* 4958 ** Check condition code 4959 */ 4960 cmd->result = ScsiResult(DID_OK, S_CHECK_COND); 4961 4962 /* 4963 ** Copy back sense data to caller's buffer. 4964 */ 4965 memcpy(cmd->sense_buffer, cp->sense_buf, 4966 min_t(size_t, SCSI_SENSE_BUFFERSIZE, 4967 sizeof(cp->sense_buf))); 4968 4969 if (DEBUG_FLAGS & (DEBUG_RESULT|DEBUG_TINY)) { 4970 u_char *p = cmd->sense_buffer; 4971 int i; 4972 PRINT_ADDR(cmd, "sense data:"); 4973 for (i=0; i<14; i++) printk (" %x", *p++); 4974 printk (".\n"); 4975 } 4976 } else if ((cp->host_status == HS_COMPLETE) 4977 && (cp->scsi_status == S_CONFLICT)) { 4978 /* 4979 ** Reservation Conflict condition code 4980 */ 4981 cmd->result = ScsiResult(DID_OK, S_CONFLICT); 4982 4983 } else if ((cp->host_status == HS_COMPLETE) 4984 && (cp->scsi_status == S_BUSY || 4985 cp->scsi_status == S_QUEUE_FULL)) { 4986 4987 /* 4988 ** Target is busy. 4989 */ 4990 cmd->result = ScsiResult(DID_OK, cp->scsi_status); 4991 4992 } else if ((cp->host_status == HS_SEL_TIMEOUT) 4993 || (cp->host_status == HS_TIMEOUT)) { 4994 4995 /* 4996 ** No response 4997 */ 4998 cmd->result = ScsiResult(DID_TIME_OUT, cp->scsi_status); 4999 5000 } else if (cp->host_status == HS_RESET) { 5001 5002 /* 5003 ** SCSI bus reset 5004 */ 5005 cmd->result = ScsiResult(DID_RESET, cp->scsi_status); 5006 5007 } else if (cp->host_status == HS_ABORTED) { 5008 5009 /* 5010 ** Transfer aborted 5011 */ 5012 cmd->result = ScsiResult(DID_ABORT, cp->scsi_status); 5013 5014 } else { 5015 5016 /* 5017 ** Other protocol messes 5018 */ 5019 PRINT_ADDR(cmd, "COMMAND FAILED (%x %x) @%p.\n", 5020 cp->host_status, cp->scsi_status, cp); 5021 5022 cmd->result = ScsiResult(DID_ERROR, cp->scsi_status); 5023 } 5024 5025 /* 5026 ** trace output 5027 */ 5028 5029 if (tp->usrflag & UF_TRACE) { 5030 u_char * p; 5031 int i; 5032 PRINT_ADDR(cmd, " CMD:"); 5033 p = (u_char*) &cmd->cmnd[0]; 5034 for (i=0; i<cmd->cmd_len; i++) printk (" %x", *p++); 5035 5036 if (cp->host_status==HS_COMPLETE) { 5037 switch (cp->scsi_status) { 5038 case S_GOOD: 5039 printk (" GOOD"); 5040 break; 5041 case S_CHECK_COND: 5042 printk (" SENSE:"); 5043 p = (u_char*) &cmd->sense_buffer; 5044 for (i=0; i<14; i++) 5045 printk (" %x", *p++); 5046 break; 5047 default: 5048 printk (" STAT: %x\n", cp->scsi_status); 5049 break; 5050 } 5051 } else printk (" HOSTERROR: %x", cp->host_status); 5052 printk ("\n"); 5053 } 5054 5055 /* 5056 ** Free this ccb 5057 */ 5058 ncr_free_ccb (np, cp); 5059 5060 /* 5061 ** requeue awaiting scsi commands for this lun. 5062 */ 5063 if (lp && lp->queuedccbs < lp->queuedepth && 5064 !list_empty(&lp->wait_ccbq)) 5065 ncr_start_next_ccb(np, lp, 2); 5066 5067 /* 5068 ** requeue awaiting scsi commands for this controller. 5069 */ 5070 if (np->waiting_list) 5071 requeue_waiting_list(np); 5072 5073 /* 5074 ** signal completion to generic driver. 5075 */ 5076 ncr_queue_done_cmd(np, cmd); 5077 } 5078 5079 /*========================================================== 5080 ** 5081 ** 5082 ** Signal all (or one) control block done. 5083 ** 5084 ** 5085 **========================================================== 5086 */ 5087 5088 /* 5089 ** This CCB has been skipped by the NCR. 5090 ** Queue it in the corresponding unit queue. 5091 */ 5092 static void ncr_ccb_skipped(struct ncb *np, struct ccb *cp) 5093 { 5094 struct tcb *tp = &np->target[cp->target]; 5095 struct lcb *lp = tp->lp[cp->lun]; 5096 5097 if (lp && cp != np->ccb) { 5098 cp->host_status &= ~HS_SKIPMASK; 5099 cp->start.schedule.l_paddr = 5100 cpu_to_scr(NCB_SCRIPT_PHYS (np, select)); 5101 list_move_tail(&cp->link_ccbq, &lp->skip_ccbq); 5102 if (cp->queued) { 5103 --lp->queuedccbs; 5104 } 5105 } 5106 if (cp->queued) { 5107 --np->queuedccbs; 5108 cp->queued = 0; 5109 } 5110 } 5111 5112 /* 5113 ** The NCR has completed CCBs. 5114 ** Look at the DONE QUEUE if enabled, otherwise scan all CCBs 5115 */ 5116 void ncr_wakeup_done (struct ncb *np) 5117 { 5118 struct ccb *cp; 5119 #ifdef SCSI_NCR_CCB_DONE_SUPPORT 5120 int i, j; 5121 5122 i = np->ccb_done_ic; 5123 while (1) { 5124 j = i+1; 5125 if (j >= MAX_DONE) 5126 j = 0; 5127 5128 cp = np->ccb_done[j]; 5129 if (!CCB_DONE_VALID(cp)) 5130 break; 5131 5132 np->ccb_done[j] = (struct ccb *)CCB_DONE_EMPTY; 5133 np->scripth->done_queue[5*j + 4] = 5134 cpu_to_scr(NCB_SCRIPT_PHYS (np, done_plug)); 5135 MEMORY_BARRIER(); 5136 np->scripth->done_queue[5*i + 4] = 5137 cpu_to_scr(NCB_SCRIPT_PHYS (np, done_end)); 5138 5139 if (cp->host_status & HS_DONEMASK) 5140 ncr_complete (np, cp); 5141 else if (cp->host_status & HS_SKIPMASK) 5142 ncr_ccb_skipped (np, cp); 5143 5144 i = j; 5145 } 5146 np->ccb_done_ic = i; 5147 #else 5148 cp = np->ccb; 5149 while (cp) { 5150 if (cp->host_status & HS_DONEMASK) 5151 ncr_complete (np, cp); 5152 else if (cp->host_status & HS_SKIPMASK) 5153 ncr_ccb_skipped (np, cp); 5154 cp = cp->link_ccb; 5155 } 5156 #endif 5157 } 5158 5159 /* 5160 ** Complete all active CCBs. 5161 */ 5162 void ncr_wakeup (struct ncb *np, u_long code) 5163 { 5164 struct ccb *cp = np->ccb; 5165 5166 while (cp) { 5167 if (cp->host_status != HS_IDLE) { 5168 cp->host_status = code; 5169 ncr_complete (np, cp); 5170 } 5171 cp = cp->link_ccb; 5172 } 5173 } 5174 5175 /* 5176 ** Reset ncr chip. 5177 */ 5178 5179 /* Some initialisation must be done immediately following reset, for 53c720, 5180 * at least. EA (dcntl bit 5) isn't set here as it is set once only in 5181 * the _detect function. 5182 */ 5183 static void ncr_chip_reset(struct ncb *np, int delay) 5184 { 5185 OUTB (nc_istat, SRST); 5186 udelay(delay); 5187 OUTB (nc_istat, 0 ); 5188 5189 if (np->features & FE_EHP) 5190 OUTB (nc_ctest0, EHP); 5191 if (np->features & FE_MUX) 5192 OUTB (nc_ctest4, MUX); 5193 } 5194 5195 5196 /*========================================================== 5197 ** 5198 ** 5199 ** Start NCR chip. 5200 ** 5201 ** 5202 **========================================================== 5203 */ 5204 5205 void ncr_init (struct ncb *np, int reset, char * msg, u_long code) 5206 { 5207 int i; 5208 5209 /* 5210 ** Reset chip if asked, otherwise just clear fifos. 5211 */ 5212 5213 if (reset) { 5214 OUTB (nc_istat, SRST); 5215 udelay(100); 5216 } 5217 else { 5218 OUTB (nc_stest3, TE|CSF); 5219 OUTONB (nc_ctest3, CLF); 5220 } 5221 5222 /* 5223 ** Message. 5224 */ 5225 5226 if (msg) printk (KERN_INFO "%s: restart (%s).\n", ncr_name (np), msg); 5227 5228 /* 5229 ** Clear Start Queue 5230 */ 5231 np->queuedepth = MAX_START - 1; /* 1 entry needed as end marker */ 5232 for (i = 1; i < MAX_START + MAX_START; i += 2) 5233 np->scripth0->tryloop[i] = 5234 cpu_to_scr(NCB_SCRIPT_PHYS (np, idle)); 5235 5236 /* 5237 ** Start at first entry. 5238 */ 5239 np->squeueput = 0; 5240 np->script0->startpos[0] = cpu_to_scr(NCB_SCRIPTH_PHYS (np, tryloop)); 5241 5242 #ifdef SCSI_NCR_CCB_DONE_SUPPORT 5243 /* 5244 ** Clear Done Queue 5245 */ 5246 for (i = 0; i < MAX_DONE; i++) { 5247 np->ccb_done[i] = (struct ccb *)CCB_DONE_EMPTY; 5248 np->scripth0->done_queue[5*i + 4] = 5249 cpu_to_scr(NCB_SCRIPT_PHYS (np, done_end)); 5250 } 5251 #endif 5252 5253 /* 5254 ** Start at first entry. 5255 */ 5256 np->script0->done_pos[0] = cpu_to_scr(NCB_SCRIPTH_PHYS (np,done_queue)); 5257 np->ccb_done_ic = MAX_DONE-1; 5258 np->scripth0->done_queue[5*(MAX_DONE-1) + 4] = 5259 cpu_to_scr(NCB_SCRIPT_PHYS (np, done_plug)); 5260 5261 /* 5262 ** Wakeup all pending jobs. 5263 */ 5264 ncr_wakeup (np, code); 5265 5266 /* 5267 ** Init chip. 5268 */ 5269 5270 /* 5271 ** Remove reset; big delay because the 895 needs time for the 5272 ** bus mode to settle 5273 */ 5274 ncr_chip_reset(np, 2000); 5275 5276 OUTB (nc_scntl0, np->rv_scntl0 | 0xc0); 5277 /* full arb., ena parity, par->ATN */ 5278 OUTB (nc_scntl1, 0x00); /* odd parity, and remove CRST!! */ 5279 5280 ncr_selectclock(np, np->rv_scntl3); /* Select SCSI clock */ 5281 5282 OUTB (nc_scid , RRE|np->myaddr); /* Adapter SCSI address */ 5283 OUTW (nc_respid, 1ul<<np->myaddr); /* Id to respond to */ 5284 OUTB (nc_istat , SIGP ); /* Signal Process */ 5285 OUTB (nc_dmode , np->rv_dmode); /* Burst length, dma mode */ 5286 OUTB (nc_ctest5, np->rv_ctest5); /* Large fifo + large burst */ 5287 5288 OUTB (nc_dcntl , NOCOM|np->rv_dcntl); /* Protect SFBR */ 5289 OUTB (nc_ctest0, np->rv_ctest0); /* 720: CDIS and EHP */ 5290 OUTB (nc_ctest3, np->rv_ctest3); /* Write and invalidate */ 5291 OUTB (nc_ctest4, np->rv_ctest4); /* Master parity checking */ 5292 5293 OUTB (nc_stest2, EXT|np->rv_stest2); /* Extended Sreq/Sack filtering */ 5294 OUTB (nc_stest3, TE); /* TolerANT enable */ 5295 OUTB (nc_stime0, 0x0c ); /* HTH disabled STO 0.25 sec */ 5296 5297 /* 5298 ** Disable disconnects. 5299 */ 5300 5301 np->disc = 0; 5302 5303 /* 5304 ** Enable GPIO0 pin for writing if LED support. 5305 */ 5306 5307 if (np->features & FE_LED0) { 5308 OUTOFFB (nc_gpcntl, 0x01); 5309 } 5310 5311 /* 5312 ** enable ints 5313 */ 5314 5315 OUTW (nc_sien , STO|HTH|MA|SGE|UDC|RST|PAR); 5316 OUTB (nc_dien , MDPE|BF|ABRT|SSI|SIR|IID); 5317 5318 /* 5319 ** Fill in target structure. 5320 ** Reinitialize usrsync. 5321 ** Reinitialize usrwide. 5322 ** Prepare sync negotiation according to actual SCSI bus mode. 5323 */ 5324 5325 for (i=0;i<MAX_TARGET;i++) { 5326 struct tcb *tp = &np->target[i]; 5327 5328 tp->sval = 0; 5329 tp->wval = np->rv_scntl3; 5330 5331 if (tp->usrsync != 255) { 5332 if (tp->usrsync <= np->maxsync) { 5333 if (tp->usrsync < np->minsync) { 5334 tp->usrsync = np->minsync; 5335 } 5336 } 5337 else 5338 tp->usrsync = 255; 5339 } 5340 5341 if (tp->usrwide > np->maxwide) 5342 tp->usrwide = np->maxwide; 5343 5344 } 5345 5346 /* 5347 ** Start script processor. 5348 */ 5349 if (np->paddr2) { 5350 if (bootverbose) 5351 printk ("%s: Downloading SCSI SCRIPTS.\n", 5352 ncr_name(np)); 5353 OUTL (nc_scratcha, vtobus(np->script0)); 5354 OUTL_DSP (NCB_SCRIPTH_PHYS (np, start_ram)); 5355 } 5356 else 5357 OUTL_DSP (NCB_SCRIPT_PHYS (np, start)); 5358 } 5359 5360 /*========================================================== 5361 ** 5362 ** Prepare the negotiation values for wide and 5363 ** synchronous transfers. 5364 ** 5365 **========================================================== 5366 */ 5367 5368 static void ncr_negotiate (struct ncb* np, struct tcb* tp) 5369 { 5370 /* 5371 ** minsync unit is 4ns ! 5372 */ 5373 5374 u_long minsync = tp->usrsync; 5375 5376 /* 5377 ** SCSI bus mode limit 5378 */ 5379 5380 if (np->scsi_mode && np->scsi_mode == SMODE_SE) { 5381 if (minsync < 12) minsync = 12; 5382 } 5383 5384 /* 5385 ** our limit .. 5386 */ 5387 5388 if (minsync < np->minsync) 5389 minsync = np->minsync; 5390 5391 /* 5392 ** divider limit 5393 */ 5394 5395 if (minsync > np->maxsync) 5396 minsync = 255; 5397 5398 if (tp->maxoffs > np->maxoffs) 5399 tp->maxoffs = np->maxoffs; 5400 5401 tp->minsync = minsync; 5402 tp->maxoffs = (minsync<255 ? tp->maxoffs : 0); 5403 5404 /* 5405 ** period=0: has to negotiate sync transfer 5406 */ 5407 5408 tp->period=0; 5409 5410 /* 5411 ** widedone=0: has to negotiate wide transfer 5412 */ 5413 tp->widedone=0; 5414 } 5415 5416 /*========================================================== 5417 ** 5418 ** Get clock factor and sync divisor for a given 5419 ** synchronous factor period. 5420 ** Returns the clock factor (in sxfer) and scntl3 5421 ** synchronous divisor field. 5422 ** 5423 **========================================================== 5424 */ 5425 5426 static void ncr_getsync(struct ncb *np, u_char sfac, u_char *fakp, u_char *scntl3p) 5427 { 5428 u_long clk = np->clock_khz; /* SCSI clock frequency in kHz */ 5429 int div = np->clock_divn; /* Number of divisors supported */ 5430 u_long fak; /* Sync factor in sxfer */ 5431 u_long per; /* Period in tenths of ns */ 5432 u_long kpc; /* (per * clk) */ 5433 5434 /* 5435 ** Compute the synchronous period in tenths of nano-seconds 5436 */ 5437 if (sfac <= 10) per = 250; 5438 else if (sfac == 11) per = 303; 5439 else if (sfac == 12) per = 500; 5440 else per = 40 * sfac; 5441 5442 /* 5443 ** Look for the greatest clock divisor that allows an 5444 ** input speed faster than the period. 5445 */ 5446 kpc = per * clk; 5447 while (--div > 0) 5448 if (kpc >= (div_10M[div] << 2)) break; 5449 5450 /* 5451 ** Calculate the lowest clock factor that allows an output 5452 ** speed not faster than the period. 5453 */ 5454 fak = (kpc - 1) / div_10M[div] + 1; 5455 5456 #if 0 /* This optimization does not seem very useful */ 5457 5458 per = (fak * div_10M[div]) / clk; 5459 5460 /* 5461 ** Why not to try the immediate lower divisor and to choose 5462 ** the one that allows the fastest output speed ? 5463 ** We don't want input speed too much greater than output speed. 5464 */ 5465 if (div >= 1 && fak < 8) { 5466 u_long fak2, per2; 5467 fak2 = (kpc - 1) / div_10M[div-1] + 1; 5468 per2 = (fak2 * div_10M[div-1]) / clk; 5469 if (per2 < per && fak2 <= 8) { 5470 fak = fak2; 5471 per = per2; 5472 --div; 5473 } 5474 } 5475 #endif 5476 5477 if (fak < 4) fak = 4; /* Should never happen, too bad ... */ 5478 5479 /* 5480 ** Compute and return sync parameters for the ncr 5481 */ 5482 *fakp = fak - 4; 5483 *scntl3p = ((div+1) << 4) + (sfac < 25 ? 0x80 : 0); 5484 } 5485 5486 5487 /*========================================================== 5488 ** 5489 ** Set actual values, sync status and patch all ccbs of 5490 ** a target according to new sync/wide agreement. 5491 ** 5492 **========================================================== 5493 */ 5494 5495 static void ncr_set_sync_wide_status (struct ncb *np, u_char target) 5496 { 5497 struct ccb *cp; 5498 struct tcb *tp = &np->target[target]; 5499 5500 /* 5501 ** set actual value and sync_status 5502 */ 5503 OUTB (nc_sxfer, tp->sval); 5504 np->sync_st = tp->sval; 5505 OUTB (nc_scntl3, tp->wval); 5506 np->wide_st = tp->wval; 5507 5508 /* 5509 ** patch ALL ccbs of this target. 5510 */ 5511 for (cp = np->ccb; cp; cp = cp->link_ccb) { 5512 if (!cp->cmd) continue; 5513 if (scmd_id(cp->cmd) != target) continue; 5514 #if 0 5515 cp->sync_status = tp->sval; 5516 cp->wide_status = tp->wval; 5517 #endif 5518 cp->phys.select.sel_scntl3 = tp->wval; 5519 cp->phys.select.sel_sxfer = tp->sval; 5520 } 5521 } 5522 5523 /*========================================================== 5524 ** 5525 ** Switch sync mode for current job and it's target 5526 ** 5527 **========================================================== 5528 */ 5529 5530 static void ncr_setsync (struct ncb *np, struct ccb *cp, u_char scntl3, u_char sxfer) 5531 { 5532 struct scsi_cmnd *cmd = cp->cmd; 5533 struct tcb *tp; 5534 u_char target = INB (nc_sdid) & 0x0f; 5535 u_char idiv; 5536 5537 BUG_ON(target != (scmd_id(cmd) & 0xf)); 5538 5539 tp = &np->target[target]; 5540 5541 if (!scntl3 || !(sxfer & 0x1f)) 5542 scntl3 = np->rv_scntl3; 5543 scntl3 = (scntl3 & 0xf0) | (tp->wval & EWS) | (np->rv_scntl3 & 0x07); 5544 5545 /* 5546 ** Deduce the value of controller sync period from scntl3. 5547 ** period is in tenths of nano-seconds. 5548 */ 5549 5550 idiv = ((scntl3 >> 4) & 0x7); 5551 if ((sxfer & 0x1f) && idiv) 5552 tp->period = (((sxfer>>5)+4)*div_10M[idiv-1])/np->clock_khz; 5553 else 5554 tp->period = 0xffff; 5555 5556 /* Stop there if sync parameters are unchanged */ 5557 if (tp->sval == sxfer && tp->wval == scntl3) 5558 return; 5559 tp->sval = sxfer; 5560 tp->wval = scntl3; 5561 5562 if (sxfer & 0x01f) { 5563 /* Disable extended Sreq/Sack filtering */ 5564 if (tp->period <= 2000) 5565 OUTOFFB(nc_stest2, EXT); 5566 } 5567 5568 spi_display_xfer_agreement(tp->starget); 5569 5570 /* 5571 ** set actual value and sync_status 5572 ** patch ALL ccbs of this target. 5573 */ 5574 ncr_set_sync_wide_status(np, target); 5575 } 5576 5577 /*========================================================== 5578 ** 5579 ** Switch wide mode for current job and it's target 5580 ** SCSI specs say: a SCSI device that accepts a WDTR 5581 ** message shall reset the synchronous agreement to 5582 ** asynchronous mode. 5583 ** 5584 **========================================================== 5585 */ 5586 5587 static void ncr_setwide (struct ncb *np, struct ccb *cp, u_char wide, u_char ack) 5588 { 5589 struct scsi_cmnd *cmd = cp->cmd; 5590 u16 target = INB (nc_sdid) & 0x0f; 5591 struct tcb *tp; 5592 u_char scntl3; 5593 u_char sxfer; 5594 5595 BUG_ON(target != (scmd_id(cmd) & 0xf)); 5596 5597 tp = &np->target[target]; 5598 tp->widedone = wide+1; 5599 scntl3 = (tp->wval & (~EWS)) | (wide ? EWS : 0); 5600 5601 sxfer = ack ? 0 : tp->sval; 5602 5603 /* 5604 ** Stop there if sync/wide parameters are unchanged 5605 */ 5606 if (tp->sval == sxfer && tp->wval == scntl3) return; 5607 tp->sval = sxfer; 5608 tp->wval = scntl3; 5609 5610 /* 5611 ** Bells and whistles ;-) 5612 */ 5613 if (bootverbose >= 2) { 5614 dev_info(&cmd->device->sdev_target->dev, "WIDE SCSI %sabled.\n", 5615 (scntl3 & EWS) ? "en" : "dis"); 5616 } 5617 5618 /* 5619 ** set actual value and sync_status 5620 ** patch ALL ccbs of this target. 5621 */ 5622 ncr_set_sync_wide_status(np, target); 5623 } 5624 5625 /*========================================================== 5626 ** 5627 ** Switch tagged mode for a target. 5628 ** 5629 **========================================================== 5630 */ 5631 5632 static void ncr_setup_tags (struct ncb *np, struct scsi_device *sdev) 5633 { 5634 unsigned char tn = sdev->id, ln = sdev->lun; 5635 struct tcb *tp = &np->target[tn]; 5636 struct lcb *lp = tp->lp[ln]; 5637 u_char reqtags, maxdepth; 5638 5639 /* 5640 ** Just in case ... 5641 */ 5642 if ((!tp) || (!lp) || !sdev) 5643 return; 5644 5645 /* 5646 ** If SCSI device queue depth is not yet set, leave here. 5647 */ 5648 if (!lp->scdev_depth) 5649 return; 5650 5651 /* 5652 ** Donnot allow more tags than the SCSI driver can queue 5653 ** for this device. 5654 ** Donnot allow more tags than we can handle. 5655 */ 5656 maxdepth = lp->scdev_depth; 5657 if (maxdepth > lp->maxnxs) maxdepth = lp->maxnxs; 5658 if (lp->maxtags > maxdepth) lp->maxtags = maxdepth; 5659 if (lp->numtags > maxdepth) lp->numtags = maxdepth; 5660 5661 /* 5662 ** only devices conformant to ANSI Version >= 2 5663 ** only devices capable of tagged commands 5664 ** only if enabled by user .. 5665 */ 5666 if (sdev->tagged_supported && lp->numtags > 1) { 5667 reqtags = lp->numtags; 5668 } else { 5669 reqtags = 1; 5670 } 5671 5672 /* 5673 ** Update max number of tags 5674 */ 5675 lp->numtags = reqtags; 5676 if (lp->numtags > lp->maxtags) 5677 lp->maxtags = lp->numtags; 5678 5679 /* 5680 ** If we want to switch tag mode, we must wait 5681 ** for no CCB to be active. 5682 */ 5683 if (reqtags > 1 && lp->usetags) { /* Stay in tagged mode */ 5684 if (lp->queuedepth == reqtags) /* Already announced */ 5685 return; 5686 lp->queuedepth = reqtags; 5687 } 5688 else if (reqtags <= 1 && !lp->usetags) { /* Stay in untagged mode */ 5689 lp->queuedepth = reqtags; 5690 return; 5691 } 5692 else { /* Want to switch tag mode */ 5693 if (lp->busyccbs) /* If not yet safe, return */ 5694 return; 5695 lp->queuedepth = reqtags; 5696 lp->usetags = reqtags > 1 ? 1 : 0; 5697 } 5698 5699 /* 5700 ** Patch the lun mini-script, according to tag mode. 5701 */ 5702 lp->jump_tag.l_paddr = lp->usetags? 5703 cpu_to_scr(NCB_SCRIPT_PHYS(np, resel_tag)) : 5704 cpu_to_scr(NCB_SCRIPT_PHYS(np, resel_notag)); 5705 5706 /* 5707 ** Announce change to user. 5708 */ 5709 if (bootverbose) { 5710 if (lp->usetags) { 5711 dev_info(&sdev->sdev_gendev, 5712 "tagged command queue depth set to %d\n", 5713 reqtags); 5714 } else { 5715 dev_info(&sdev->sdev_gendev, 5716 "tagged command queueing disabled\n"); 5717 } 5718 } 5719 } 5720 5721 /*========================================================== 5722 ** 5723 ** 5724 ** ncr timeout handler. 5725 ** 5726 ** 5727 **========================================================== 5728 ** 5729 ** Misused to keep the driver running when 5730 ** interrupts are not configured correctly. 5731 ** 5732 **---------------------------------------------------------- 5733 */ 5734 5735 static void ncr_timeout (struct ncb *np) 5736 { 5737 u_long thistime = jiffies; 5738 5739 /* 5740 ** If release process in progress, let's go 5741 ** Set the release stage from 1 to 2 to synchronize 5742 ** with the release process. 5743 */ 5744 5745 if (np->release_stage) { 5746 if (np->release_stage == 1) np->release_stage = 2; 5747 return; 5748 } 5749 5750 np->timer.expires = jiffies + SCSI_NCR_TIMER_INTERVAL; 5751 add_timer(&np->timer); 5752 5753 /* 5754 ** If we are resetting the ncr, wait for settle_time before 5755 ** clearing it. Then command processing will be resumed. 5756 */ 5757 if (np->settle_time) { 5758 if (np->settle_time <= thistime) { 5759 if (bootverbose > 1) 5760 printk("%s: command processing resumed\n", ncr_name(np)); 5761 np->settle_time = 0; 5762 np->disc = 1; 5763 requeue_waiting_list(np); 5764 } 5765 return; 5766 } 5767 5768 /* 5769 ** Since the generic scsi driver only allows us 0.5 second 5770 ** to perform abort of a command, we must look at ccbs about 5771 ** every 0.25 second. 5772 */ 5773 if (np->lasttime + 4*HZ < thistime) { 5774 /* 5775 ** block ncr interrupts 5776 */ 5777 np->lasttime = thistime; 5778 } 5779 5780 #ifdef SCSI_NCR_BROKEN_INTR 5781 if (INB(nc_istat) & (INTF|SIP|DIP)) { 5782 5783 /* 5784 ** Process pending interrupts. 5785 */ 5786 if (DEBUG_FLAGS & DEBUG_TINY) printk ("{"); 5787 ncr_exception (np); 5788 if (DEBUG_FLAGS & DEBUG_TINY) printk ("}"); 5789 } 5790 #endif /* SCSI_NCR_BROKEN_INTR */ 5791 } 5792 5793 /*========================================================== 5794 ** 5795 ** log message for real hard errors 5796 ** 5797 ** "ncr0 targ 0?: ERROR (ds:si) (so-si-sd) (sxfer/scntl3) @ name (dsp:dbc)." 5798 ** " reg: r0 r1 r2 r3 r4 r5 r6 ..... rf." 5799 ** 5800 ** exception register: 5801 ** ds: dstat 5802 ** si: sist 5803 ** 5804 ** SCSI bus lines: 5805 ** so: control lines as driver by NCR. 5806 ** si: control lines as seen by NCR. 5807 ** sd: scsi data lines as seen by NCR. 5808 ** 5809 ** wide/fastmode: 5810 ** sxfer: (see the manual) 5811 ** scntl3: (see the manual) 5812 ** 5813 ** current script command: 5814 ** dsp: script address (relative to start of script). 5815 ** dbc: first word of script command. 5816 ** 5817 ** First 16 register of the chip: 5818 ** r0..rf 5819 ** 5820 **========================================================== 5821 */ 5822 5823 static void ncr_log_hard_error(struct ncb *np, u16 sist, u_char dstat) 5824 { 5825 u32 dsp; 5826 int script_ofs; 5827 int script_size; 5828 char *script_name; 5829 u_char *script_base; 5830 int i; 5831 5832 dsp = INL (nc_dsp); 5833 5834 if (dsp > np->p_script && dsp <= np->p_script + sizeof(struct script)) { 5835 script_ofs = dsp - np->p_script; 5836 script_size = sizeof(struct script); 5837 script_base = (u_char *) np->script0; 5838 script_name = "script"; 5839 } 5840 else if (np->p_scripth < dsp && 5841 dsp <= np->p_scripth + sizeof(struct scripth)) { 5842 script_ofs = dsp - np->p_scripth; 5843 script_size = sizeof(struct scripth); 5844 script_base = (u_char *) np->scripth0; 5845 script_name = "scripth"; 5846 } else { 5847 script_ofs = dsp; 5848 script_size = 0; 5849 script_base = NULL; 5850 script_name = "mem"; 5851 } 5852 5853 printk ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x) @ (%s %x:%08x).\n", 5854 ncr_name (np), (unsigned)INB (nc_sdid)&0x0f, dstat, sist, 5855 (unsigned)INB (nc_socl), (unsigned)INB (nc_sbcl), (unsigned)INB (nc_sbdl), 5856 (unsigned)INB (nc_sxfer),(unsigned)INB (nc_scntl3), script_name, script_ofs, 5857 (unsigned)INL (nc_dbc)); 5858 5859 if (((script_ofs & 3) == 0) && 5860 (unsigned)script_ofs < script_size) { 5861 printk ("%s: script cmd = %08x\n", ncr_name(np), 5862 scr_to_cpu((int) *(ncrcmd *)(script_base + script_ofs))); 5863 } 5864 5865 printk ("%s: regdump:", ncr_name(np)); 5866 for (i=0; i<16;i++) 5867 printk (" %02x", (unsigned)INB_OFF(i)); 5868 printk (".\n"); 5869 } 5870 5871 /*============================================================ 5872 ** 5873 ** ncr chip exception handler. 5874 ** 5875 **============================================================ 5876 ** 5877 ** In normal cases, interrupt conditions occur one at a 5878 ** time. The ncr is able to stack in some extra registers 5879 ** other interrupts that will occur after the first one. 5880 ** But, several interrupts may occur at the same time. 5881 ** 5882 ** We probably should only try to deal with the normal 5883 ** case, but it seems that multiple interrupts occur in 5884 ** some cases that are not abnormal at all. 5885 ** 5886 ** The most frequent interrupt condition is Phase Mismatch. 5887 ** We should want to service this interrupt quickly. 5888 ** A SCSI parity error may be delivered at the same time. 5889 ** The SIR interrupt is not very frequent in this driver, 5890 ** since the INTFLY is likely used for command completion 5891 ** signaling. 5892 ** The Selection Timeout interrupt may be triggered with 5893 ** IID and/or UDC. 5894 ** The SBMC interrupt (SCSI Bus Mode Change) may probably 5895 ** occur at any time. 5896 ** 5897 ** This handler try to deal as cleverly as possible with all 5898 ** the above. 5899 ** 5900 **============================================================ 5901 */ 5902 5903 void ncr_exception (struct ncb *np) 5904 { 5905 u_char istat, dstat; 5906 u16 sist; 5907 int i; 5908 5909 /* 5910 ** interrupt on the fly ? 5911 ** Since the global header may be copied back to a CCB 5912 ** using a posted PCI memory write, the last operation on 5913 ** the istat register is a READ in order to flush posted 5914 ** PCI write commands. 5915 */ 5916 istat = INB (nc_istat); 5917 if (istat & INTF) { 5918 OUTB (nc_istat, (istat & SIGP) | INTF); 5919 istat = INB (nc_istat); 5920 if (DEBUG_FLAGS & DEBUG_TINY) printk ("F "); 5921 ncr_wakeup_done (np); 5922 } 5923 5924 if (!(istat & (SIP|DIP))) 5925 return; 5926 5927 if (istat & CABRT) 5928 OUTB (nc_istat, CABRT); 5929 5930 /* 5931 ** Steinbach's Guideline for Systems Programming: 5932 ** Never test for an error condition you don't know how to handle. 5933 */ 5934 5935 sist = (istat & SIP) ? INW (nc_sist) : 0; 5936 dstat = (istat & DIP) ? INB (nc_dstat) : 0; 5937 5938 if (DEBUG_FLAGS & DEBUG_TINY) 5939 printk ("<%d|%x:%x|%x:%x>", 5940 (int)INB(nc_scr0), 5941 dstat,sist, 5942 (unsigned)INL(nc_dsp), 5943 (unsigned)INL(nc_dbc)); 5944 5945 /*======================================================== 5946 ** First, interrupts we want to service cleanly. 5947 ** 5948 ** Phase mismatch is the most frequent interrupt, and 5949 ** so we have to service it as quickly and as cleanly 5950 ** as possible. 5951 ** Programmed interrupts are rarely used in this driver, 5952 ** but we must handle them cleanly anyway. 5953 ** We try to deal with PAR and SBMC combined with 5954 ** some other interrupt(s). 5955 **========================================================= 5956 */ 5957 5958 if (!(sist & (STO|GEN|HTH|SGE|UDC|RST)) && 5959 !(dstat & (MDPE|BF|ABRT|IID))) { 5960 if ((sist & SBMC) && ncr_int_sbmc (np)) 5961 return; 5962 if ((sist & PAR) && ncr_int_par (np)) 5963 return; 5964 if (sist & MA) { 5965 ncr_int_ma (np); 5966 return; 5967 } 5968 if (dstat & SIR) { 5969 ncr_int_sir (np); 5970 return; 5971 } 5972 /* 5973 ** DEL 397 - 53C875 Rev 3 - Part Number 609-0392410 - ITEM 2. 5974 */ 5975 if (!(sist & (SBMC|PAR)) && !(dstat & SSI)) { 5976 printk( "%s: unknown interrupt(s) ignored, " 5977 "ISTAT=%x DSTAT=%x SIST=%x\n", 5978 ncr_name(np), istat, dstat, sist); 5979 return; 5980 } 5981 OUTONB_STD (); 5982 return; 5983 } 5984 5985 /*======================================================== 5986 ** Now, interrupts that need some fixing up. 5987 ** Order and multiple interrupts is so less important. 5988 ** 5989 ** If SRST has been asserted, we just reset the chip. 5990 ** 5991 ** Selection is intirely handled by the chip. If the 5992 ** chip says STO, we trust it. Seems some other 5993 ** interrupts may occur at the same time (UDC, IID), so 5994 ** we ignore them. In any case we do enough fix-up 5995 ** in the service routine. 5996 ** We just exclude some fatal dma errors. 5997 **========================================================= 5998 */ 5999 6000 if (sist & RST) { 6001 ncr_init (np, 1, bootverbose ? "scsi reset" : NULL, HS_RESET); 6002 return; 6003 } 6004 6005 if ((sist & STO) && 6006 !(dstat & (MDPE|BF|ABRT))) { 6007 /* 6008 ** DEL 397 - 53C875 Rev 3 - Part Number 609-0392410 - ITEM 1. 6009 */ 6010 OUTONB (nc_ctest3, CLF); 6011 6012 ncr_int_sto (np); 6013 return; 6014 } 6015 6016 /*========================================================= 6017 ** Now, interrupts we are not able to recover cleanly. 6018 ** (At least for the moment). 6019 ** 6020 ** Do the register dump. 6021 ** Log message for real hard errors. 6022 ** Clear all fifos. 6023 ** For MDPE, BF, ABORT, IID, SGE and HTH we reset the 6024 ** BUS and the chip. 6025 ** We are more soft for UDC. 6026 **========================================================= 6027 */ 6028 6029 if (time_after(jiffies, np->regtime)) { 6030 np->regtime = jiffies + 10*HZ; 6031 for (i = 0; i<sizeof(np->regdump); i++) 6032 ((char*)&np->regdump)[i] = INB_OFF(i); 6033 np->regdump.nc_dstat = dstat; 6034 np->regdump.nc_sist = sist; 6035 } 6036 6037 ncr_log_hard_error(np, sist, dstat); 6038 6039 printk ("%s: have to clear fifos.\n", ncr_name (np)); 6040 OUTB (nc_stest3, TE|CSF); 6041 OUTONB (nc_ctest3, CLF); 6042 6043 if ((sist & (SGE)) || 6044 (dstat & (MDPE|BF|ABRT|IID))) { 6045 ncr_start_reset(np); 6046 return; 6047 } 6048 6049 if (sist & HTH) { 6050 printk ("%s: handshake timeout\n", ncr_name(np)); 6051 ncr_start_reset(np); 6052 return; 6053 } 6054 6055 if (sist & UDC) { 6056 printk ("%s: unexpected disconnect\n", ncr_name(np)); 6057 OUTB (HS_PRT, HS_UNEXPECTED); 6058 OUTL_DSP (NCB_SCRIPT_PHYS (np, cleanup)); 6059 return; 6060 } 6061 6062 /*========================================================= 6063 ** We just miss the cause of the interrupt. :( 6064 ** Print a message. The timeout will do the real work. 6065 **========================================================= 6066 */ 6067 printk ("%s: unknown interrupt\n", ncr_name(np)); 6068 } 6069 6070 /*========================================================== 6071 ** 6072 ** ncr chip exception handler for selection timeout 6073 ** 6074 **========================================================== 6075 ** 6076 ** There seems to be a bug in the 53c810. 6077 ** Although a STO-Interrupt is pending, 6078 ** it continues executing script commands. 6079 ** But it will fail and interrupt (IID) on 6080 ** the next instruction where it's looking 6081 ** for a valid phase. 6082 ** 6083 **---------------------------------------------------------- 6084 */ 6085 6086 void ncr_int_sto (struct ncb *np) 6087 { 6088 u_long dsa; 6089 struct ccb *cp; 6090 if (DEBUG_FLAGS & DEBUG_TINY) printk ("T"); 6091 6092 /* 6093 ** look for ccb and set the status. 6094 */ 6095 6096 dsa = INL (nc_dsa); 6097 cp = np->ccb; 6098 while (cp && (CCB_PHYS (cp, phys) != dsa)) 6099 cp = cp->link_ccb; 6100 6101 if (cp) { 6102 cp-> host_status = HS_SEL_TIMEOUT; 6103 ncr_complete (np, cp); 6104 } 6105 6106 /* 6107 ** repair start queue and jump to start point. 6108 */ 6109 6110 OUTL_DSP (NCB_SCRIPTH_PHYS (np, sto_restart)); 6111 return; 6112 } 6113 6114 /*========================================================== 6115 ** 6116 ** ncr chip exception handler for SCSI bus mode change 6117 ** 6118 **========================================================== 6119 ** 6120 ** spi2-r12 11.2.3 says a transceiver mode change must 6121 ** generate a reset event and a device that detects a reset 6122 ** event shall initiate a hard reset. It says also that a 6123 ** device that detects a mode change shall set data transfer 6124 ** mode to eight bit asynchronous, etc... 6125 ** So, just resetting should be enough. 6126 ** 6127 ** 6128 **---------------------------------------------------------- 6129 */ 6130 6131 static int ncr_int_sbmc (struct ncb *np) 6132 { 6133 u_char scsi_mode = INB (nc_stest4) & SMODE; 6134 6135 if (scsi_mode != np->scsi_mode) { 6136 printk("%s: SCSI bus mode change from %x to %x.\n", 6137 ncr_name(np), np->scsi_mode, scsi_mode); 6138 6139 np->scsi_mode = scsi_mode; 6140 6141 6142 /* 6143 ** Suspend command processing for 1 second and 6144 ** reinitialize all except the chip. 6145 */ 6146 np->settle_time = jiffies + HZ; 6147 ncr_init (np, 0, bootverbose ? "scsi mode change" : NULL, HS_RESET); 6148 return 1; 6149 } 6150 return 0; 6151 } 6152 6153 /*========================================================== 6154 ** 6155 ** ncr chip exception handler for SCSI parity error. 6156 ** 6157 **========================================================== 6158 ** 6159 ** 6160 **---------------------------------------------------------- 6161 */ 6162 6163 static int ncr_int_par (struct ncb *np) 6164 { 6165 u_char hsts = INB (HS_PRT); 6166 u32 dbc = INL (nc_dbc); 6167 u_char sstat1 = INB (nc_sstat1); 6168 int phase = -1; 6169 int msg = -1; 6170 u32 jmp; 6171 6172 printk("%s: SCSI parity error detected: SCR1=%d DBC=%x SSTAT1=%x\n", 6173 ncr_name(np), hsts, dbc, sstat1); 6174 6175 /* 6176 * Ignore the interrupt if the NCR is not connected 6177 * to the SCSI bus, since the right work should have 6178 * been done on unexpected disconnection handling. 6179 */ 6180 if (!(INB (nc_scntl1) & ISCON)) 6181 return 0; 6182 6183 /* 6184 * If the nexus is not clearly identified, reset the bus. 6185 * We will try to do better later. 6186 */ 6187 if (hsts & HS_INVALMASK) 6188 goto reset_all; 6189 6190 /* 6191 * If the SCSI parity error occurs in MSG IN phase, prepare a 6192 * MSG PARITY message. Otherwise, prepare a INITIATOR DETECTED 6193 * ERROR message and let the device decide to retry the command 6194 * or to terminate with check condition. If we were in MSG IN 6195 * phase waiting for the response of a negotiation, we will 6196 * get SIR_NEGO_FAILED at dispatch. 6197 */ 6198 if (!(dbc & 0xc0000000)) 6199 phase = (dbc >> 24) & 7; 6200 if (phase == 7) 6201 msg = MSG_PARITY_ERROR; 6202 else 6203 msg = INITIATOR_ERROR; 6204 6205 6206 /* 6207 * If the NCR stopped on a MOVE ^ DATA_IN, we jump to a 6208 * script that will ignore all data in bytes until phase 6209 * change, since we are not sure the chip will wait the phase 6210 * change prior to delivering the interrupt. 6211 */ 6212 if (phase == 1) 6213 jmp = NCB_SCRIPTH_PHYS (np, par_err_data_in); 6214 else 6215 jmp = NCB_SCRIPTH_PHYS (np, par_err_other); 6216 6217 OUTONB (nc_ctest3, CLF ); /* clear dma fifo */ 6218 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ 6219 6220 np->msgout[0] = msg; 6221 OUTL_DSP (jmp); 6222 return 1; 6223 6224 reset_all: 6225 ncr_start_reset(np); 6226 return 1; 6227 } 6228 6229 /*========================================================== 6230 ** 6231 ** 6232 ** ncr chip exception handler for phase errors. 6233 ** 6234 ** 6235 **========================================================== 6236 ** 6237 ** We have to construct a new transfer descriptor, 6238 ** to transfer the rest of the current block. 6239 ** 6240 **---------------------------------------------------------- 6241 */ 6242 6243 static void ncr_int_ma (struct ncb *np) 6244 { 6245 u32 dbc; 6246 u32 rest; 6247 u32 dsp; 6248 u32 dsa; 6249 u32 nxtdsp; 6250 u32 newtmp; 6251 u32 *vdsp; 6252 u32 oadr, olen; 6253 u32 *tblp; 6254 ncrcmd *newcmd; 6255 u_char cmd, sbcl; 6256 struct ccb *cp; 6257 6258 dsp = INL (nc_dsp); 6259 dbc = INL (nc_dbc); 6260 sbcl = INB (nc_sbcl); 6261 6262 cmd = dbc >> 24; 6263 rest = dbc & 0xffffff; 6264 6265 /* 6266 ** Take into account dma fifo and various buffers and latches, 6267 ** only if the interrupted phase is an OUTPUT phase. 6268 */ 6269 6270 if ((cmd & 1) == 0) { 6271 u_char ctest5, ss0, ss2; 6272 u16 delta; 6273 6274 ctest5 = (np->rv_ctest5 & DFS) ? INB (nc_ctest5) : 0; 6275 if (ctest5 & DFS) 6276 delta=(((ctest5 << 8) | (INB (nc_dfifo) & 0xff)) - rest) & 0x3ff; 6277 else 6278 delta=(INB (nc_dfifo) - rest) & 0x7f; 6279 6280 /* 6281 ** The data in the dma fifo has not been transferred to 6282 ** the target -> add the amount to the rest 6283 ** and clear the data. 6284 ** Check the sstat2 register in case of wide transfer. 6285 */ 6286 6287 rest += delta; 6288 ss0 = INB (nc_sstat0); 6289 if (ss0 & OLF) rest++; 6290 if (ss0 & ORF) rest++; 6291 if (INB(nc_scntl3) & EWS) { 6292 ss2 = INB (nc_sstat2); 6293 if (ss2 & OLF1) rest++; 6294 if (ss2 & ORF1) rest++; 6295 } 6296 6297 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE)) 6298 printk ("P%x%x RL=%d D=%d SS0=%x ", cmd&7, sbcl&7, 6299 (unsigned) rest, (unsigned) delta, ss0); 6300 6301 } else { 6302 if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE)) 6303 printk ("P%x%x RL=%d ", cmd&7, sbcl&7, rest); 6304 } 6305 6306 /* 6307 ** Clear fifos. 6308 */ 6309 OUTONB (nc_ctest3, CLF ); /* clear dma fifo */ 6310 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ 6311 6312 /* 6313 ** locate matching cp. 6314 ** if the interrupted phase is DATA IN or DATA OUT, 6315 ** trust the global header. 6316 */ 6317 dsa = INL (nc_dsa); 6318 if (!(cmd & 6)) { 6319 cp = np->header.cp; 6320 if (CCB_PHYS(cp, phys) != dsa) 6321 cp = NULL; 6322 } else { 6323 cp = np->ccb; 6324 while (cp && (CCB_PHYS (cp, phys) != dsa)) 6325 cp = cp->link_ccb; 6326 } 6327 6328 /* 6329 ** try to find the interrupted script command, 6330 ** and the address at which to continue. 6331 */ 6332 vdsp = NULL; 6333 nxtdsp = 0; 6334 if (dsp > np->p_script && 6335 dsp <= np->p_script + sizeof(struct script)) { 6336 vdsp = (u32 *)((char*)np->script0 + (dsp-np->p_script-8)); 6337 nxtdsp = dsp; 6338 } 6339 else if (dsp > np->p_scripth && 6340 dsp <= np->p_scripth + sizeof(struct scripth)) { 6341 vdsp = (u32 *)((char*)np->scripth0 + (dsp-np->p_scripth-8)); 6342 nxtdsp = dsp; 6343 } 6344 else if (cp) { 6345 if (dsp == CCB_PHYS (cp, patch[2])) { 6346 vdsp = &cp->patch[0]; 6347 nxtdsp = scr_to_cpu(vdsp[3]); 6348 } 6349 else if (dsp == CCB_PHYS (cp, patch[6])) { 6350 vdsp = &cp->patch[4]; 6351 nxtdsp = scr_to_cpu(vdsp[3]); 6352 } 6353 } 6354 6355 /* 6356 ** log the information 6357 */ 6358 6359 if (DEBUG_FLAGS & DEBUG_PHASE) { 6360 printk ("\nCP=%p CP2=%p DSP=%x NXT=%x VDSP=%p CMD=%x ", 6361 cp, np->header.cp, 6362 (unsigned)dsp, 6363 (unsigned)nxtdsp, vdsp, cmd); 6364 } 6365 6366 /* 6367 ** cp=0 means that the DSA does not point to a valid control 6368 ** block. This should not happen since we donnot use multi-byte 6369 ** move while we are being reselected ot after command complete. 6370 ** We are not able to recover from such a phase error. 6371 */ 6372 if (!cp) { 6373 printk ("%s: SCSI phase error fixup: " 6374 "CCB already dequeued (0x%08lx)\n", 6375 ncr_name (np), (u_long) np->header.cp); 6376 goto reset_all; 6377 } 6378 6379 /* 6380 ** get old startaddress and old length. 6381 */ 6382 6383 oadr = scr_to_cpu(vdsp[1]); 6384 6385 if (cmd & 0x10) { /* Table indirect */ 6386 tblp = (u32 *) ((char*) &cp->phys + oadr); 6387 olen = scr_to_cpu(tblp[0]); 6388 oadr = scr_to_cpu(tblp[1]); 6389 } else { 6390 tblp = (u32 *) 0; 6391 olen = scr_to_cpu(vdsp[0]) & 0xffffff; 6392 } 6393 6394 if (DEBUG_FLAGS & DEBUG_PHASE) { 6395 printk ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n", 6396 (unsigned) (scr_to_cpu(vdsp[0]) >> 24), 6397 tblp, 6398 (unsigned) olen, 6399 (unsigned) oadr); 6400 } 6401 6402 /* 6403 ** check cmd against assumed interrupted script command. 6404 */ 6405 6406 if (cmd != (scr_to_cpu(vdsp[0]) >> 24)) { 6407 PRINT_ADDR(cp->cmd, "internal error: cmd=%02x != %02x=(vdsp[0] " 6408 ">> 24)\n", cmd, scr_to_cpu(vdsp[0]) >> 24); 6409 6410 goto reset_all; 6411 } 6412 6413 /* 6414 ** cp != np->header.cp means that the header of the CCB 6415 ** currently being processed has not yet been copied to 6416 ** the global header area. That may happen if the device did 6417 ** not accept all our messages after having been selected. 6418 */ 6419 if (cp != np->header.cp) { 6420 printk ("%s: SCSI phase error fixup: " 6421 "CCB address mismatch (0x%08lx != 0x%08lx)\n", 6422 ncr_name (np), (u_long) cp, (u_long) np->header.cp); 6423 } 6424 6425 /* 6426 ** if old phase not dataphase, leave here. 6427 */ 6428 6429 if (cmd & 0x06) { 6430 PRINT_ADDR(cp->cmd, "phase change %x-%x %d@%08x resid=%d.\n", 6431 cmd&7, sbcl&7, (unsigned)olen, 6432 (unsigned)oadr, (unsigned)rest); 6433 goto unexpected_phase; 6434 } 6435 6436 /* 6437 ** choose the correct patch area. 6438 ** if savep points to one, choose the other. 6439 */ 6440 6441 newcmd = cp->patch; 6442 newtmp = CCB_PHYS (cp, patch); 6443 if (newtmp == scr_to_cpu(cp->phys.header.savep)) { 6444 newcmd = &cp->patch[4]; 6445 newtmp = CCB_PHYS (cp, patch[4]); 6446 } 6447 6448 /* 6449 ** fillin the commands 6450 */ 6451 6452 newcmd[0] = cpu_to_scr(((cmd & 0x0f) << 24) | rest); 6453 newcmd[1] = cpu_to_scr(oadr + olen - rest); 6454 newcmd[2] = cpu_to_scr(SCR_JUMP); 6455 newcmd[3] = cpu_to_scr(nxtdsp); 6456 6457 if (DEBUG_FLAGS & DEBUG_PHASE) { 6458 PRINT_ADDR(cp->cmd, "newcmd[%d] %x %x %x %x.\n", 6459 (int) (newcmd - cp->patch), 6460 (unsigned)scr_to_cpu(newcmd[0]), 6461 (unsigned)scr_to_cpu(newcmd[1]), 6462 (unsigned)scr_to_cpu(newcmd[2]), 6463 (unsigned)scr_to_cpu(newcmd[3])); 6464 } 6465 /* 6466 ** fake the return address (to the patch). 6467 ** and restart script processor at dispatcher. 6468 */ 6469 OUTL (nc_temp, newtmp); 6470 OUTL_DSP (NCB_SCRIPT_PHYS (np, dispatch)); 6471 return; 6472 6473 /* 6474 ** Unexpected phase changes that occurs when the current phase 6475 ** is not a DATA IN or DATA OUT phase are due to error conditions. 6476 ** Such event may only happen when the SCRIPTS is using a 6477 ** multibyte SCSI MOVE. 6478 ** 6479 ** Phase change Some possible cause 6480 ** 6481 ** COMMAND --> MSG IN SCSI parity error detected by target. 6482 ** COMMAND --> STATUS Bad command or refused by target. 6483 ** MSG OUT --> MSG IN Message rejected by target. 6484 ** MSG OUT --> COMMAND Bogus target that discards extended 6485 ** negotiation messages. 6486 ** 6487 ** The code below does not care of the new phase and so 6488 ** trusts the target. Why to annoy it ? 6489 ** If the interrupted phase is COMMAND phase, we restart at 6490 ** dispatcher. 6491 ** If a target does not get all the messages after selection, 6492 ** the code assumes blindly that the target discards extended 6493 ** messages and clears the negotiation status. 6494 ** If the target does not want all our response to negotiation, 6495 ** we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids 6496 ** bloat for such a should_not_happen situation). 6497 ** In all other situation, we reset the BUS. 6498 ** Are these assumptions reasonable ? (Wait and see ...) 6499 */ 6500 unexpected_phase: 6501 dsp -= 8; 6502 nxtdsp = 0; 6503 6504 switch (cmd & 7) { 6505 case 2: /* COMMAND phase */ 6506 nxtdsp = NCB_SCRIPT_PHYS (np, dispatch); 6507 break; 6508 #if 0 6509 case 3: /* STATUS phase */ 6510 nxtdsp = NCB_SCRIPT_PHYS (np, dispatch); 6511 break; 6512 #endif 6513 case 6: /* MSG OUT phase */ 6514 np->scripth->nxtdsp_go_on[0] = cpu_to_scr(dsp + 8); 6515 if (dsp == NCB_SCRIPT_PHYS (np, send_ident)) { 6516 cp->host_status = HS_BUSY; 6517 nxtdsp = NCB_SCRIPTH_PHYS (np, clratn_go_on); 6518 } 6519 else if (dsp == NCB_SCRIPTH_PHYS (np, send_wdtr) || 6520 dsp == NCB_SCRIPTH_PHYS (np, send_sdtr)) { 6521 nxtdsp = NCB_SCRIPTH_PHYS (np, nego_bad_phase); 6522 } 6523 break; 6524 #if 0 6525 case 7: /* MSG IN phase */ 6526 nxtdsp = NCB_SCRIPT_PHYS (np, clrack); 6527 break; 6528 #endif 6529 } 6530 6531 if (nxtdsp) { 6532 OUTL_DSP (nxtdsp); 6533 return; 6534 } 6535 6536 reset_all: 6537 ncr_start_reset(np); 6538 } 6539 6540 6541 static void ncr_sir_to_redo(struct ncb *np, int num, struct ccb *cp) 6542 { 6543 struct scsi_cmnd *cmd = cp->cmd; 6544 struct tcb *tp = &np->target[cmd->device->id]; 6545 struct lcb *lp = tp->lp[cmd->device->lun]; 6546 struct list_head *qp; 6547 struct ccb * cp2; 6548 int disc_cnt = 0; 6549 int busy_cnt = 0; 6550 u32 startp; 6551 u_char s_status = INB (SS_PRT); 6552 6553 /* 6554 ** Let the SCRIPTS processor skip all not yet started CCBs, 6555 ** and count disconnected CCBs. Since the busy queue is in 6556 ** the same order as the chip start queue, disconnected CCBs 6557 ** are before cp and busy ones after. 6558 */ 6559 if (lp) { 6560 qp = lp->busy_ccbq.prev; 6561 while (qp != &lp->busy_ccbq) { 6562 cp2 = list_entry(qp, struct ccb, link_ccbq); 6563 qp = qp->prev; 6564 ++busy_cnt; 6565 if (cp2 == cp) 6566 break; 6567 cp2->start.schedule.l_paddr = 6568 cpu_to_scr(NCB_SCRIPTH_PHYS (np, skip)); 6569 } 6570 lp->held_ccb = cp; /* Requeue when this one completes */ 6571 disc_cnt = lp->queuedccbs - busy_cnt; 6572 } 6573 6574 switch(s_status) { 6575 default: /* Just for safety, should never happen */ 6576 case S_QUEUE_FULL: 6577 /* 6578 ** Decrease number of tags to the number of 6579 ** disconnected commands. 6580 */ 6581 if (!lp) 6582 goto out; 6583 if (bootverbose >= 1) { 6584 PRINT_ADDR(cmd, "QUEUE FULL! %d busy, %d disconnected " 6585 "CCBs\n", busy_cnt, disc_cnt); 6586 } 6587 if (disc_cnt < lp->numtags) { 6588 lp->numtags = disc_cnt > 2 ? disc_cnt : 2; 6589 lp->num_good = 0; 6590 ncr_setup_tags (np, cmd->device); 6591 } 6592 /* 6593 ** Requeue the command to the start queue. 6594 ** If any disconnected commands, 6595 ** Clear SIGP. 6596 ** Jump to reselect. 6597 */ 6598 cp->phys.header.savep = cp->startp; 6599 cp->host_status = HS_BUSY; 6600 cp->scsi_status = S_ILLEGAL; 6601 6602 ncr_put_start_queue(np, cp); 6603 if (disc_cnt) 6604 INB (nc_ctest2); /* Clear SIGP */ 6605 OUTL_DSP (NCB_SCRIPT_PHYS (np, reselect)); 6606 return; 6607 case S_TERMINATED: 6608 case S_CHECK_COND: 6609 /* 6610 ** If we were requesting sense, give up. 6611 */ 6612 if (cp->auto_sense) 6613 goto out; 6614 6615 /* 6616 ** Device returned CHECK CONDITION status. 6617 ** Prepare all needed data strutures for getting 6618 ** sense data. 6619 ** 6620 ** identify message 6621 */ 6622 cp->scsi_smsg2[0] = IDENTIFY(0, cmd->device->lun); 6623 cp->phys.smsg.addr = cpu_to_scr(CCB_PHYS (cp, scsi_smsg2)); 6624 cp->phys.smsg.size = cpu_to_scr(1); 6625 6626 /* 6627 ** sense command 6628 */ 6629 cp->phys.cmd.addr = cpu_to_scr(CCB_PHYS (cp, sensecmd)); 6630 cp->phys.cmd.size = cpu_to_scr(6); 6631 6632 /* 6633 ** patch requested size into sense command 6634 */ 6635 cp->sensecmd[0] = 0x03; 6636 cp->sensecmd[1] = (cmd->device->lun & 0x7) << 5; 6637 cp->sensecmd[4] = sizeof(cp->sense_buf); 6638 6639 /* 6640 ** sense data 6641 */ 6642 memset(cp->sense_buf, 0, sizeof(cp->sense_buf)); 6643 cp->phys.sense.addr = cpu_to_scr(CCB_PHYS(cp,sense_buf[0])); 6644 cp->phys.sense.size = cpu_to_scr(sizeof(cp->sense_buf)); 6645 6646 /* 6647 ** requeue the command. 6648 */ 6649 startp = cpu_to_scr(NCB_SCRIPTH_PHYS (np, sdata_in)); 6650 6651 cp->phys.header.savep = startp; 6652 cp->phys.header.goalp = startp + 24; 6653 cp->phys.header.lastp = startp; 6654 cp->phys.header.wgoalp = startp + 24; 6655 cp->phys.header.wlastp = startp; 6656 6657 cp->host_status = HS_BUSY; 6658 cp->scsi_status = S_ILLEGAL; 6659 cp->auto_sense = s_status; 6660 6661 cp->start.schedule.l_paddr = 6662 cpu_to_scr(NCB_SCRIPT_PHYS (np, select)); 6663 6664 /* 6665 ** Select without ATN for quirky devices. 6666 */ 6667 if (cmd->device->select_no_atn) 6668 cp->start.schedule.l_paddr = 6669 cpu_to_scr(NCB_SCRIPTH_PHYS (np, select_no_atn)); 6670 6671 ncr_put_start_queue(np, cp); 6672 6673 OUTL_DSP (NCB_SCRIPT_PHYS (np, start)); 6674 return; 6675 } 6676 6677 out: 6678 OUTONB_STD (); 6679 return; 6680 } 6681 6682 6683 /*========================================================== 6684 ** 6685 ** 6686 ** ncr chip exception handler for programmed interrupts. 6687 ** 6688 ** 6689 **========================================================== 6690 */ 6691 6692 void ncr_int_sir (struct ncb *np) 6693 { 6694 u_char scntl3; 6695 u_char chg, ofs, per, fak, wide; 6696 u_char num = INB (nc_dsps); 6697 struct ccb *cp=NULL; 6698 u_long dsa = INL (nc_dsa); 6699 u_char target = INB (nc_sdid) & 0x0f; 6700 struct tcb *tp = &np->target[target]; 6701 struct scsi_target *starget = tp->starget; 6702 6703 if (DEBUG_FLAGS & DEBUG_TINY) printk ("I#%d", num); 6704 6705 switch (num) { 6706 case SIR_INTFLY: 6707 /* 6708 ** This is used for HP Zalon/53c720 where INTFLY 6709 ** operation is currently broken. 6710 */ 6711 ncr_wakeup_done(np); 6712 #ifdef SCSI_NCR_CCB_DONE_SUPPORT 6713 OUTL(nc_dsp, NCB_SCRIPT_PHYS (np, done_end) + 8); 6714 #else 6715 OUTL(nc_dsp, NCB_SCRIPT_PHYS (np, start)); 6716 #endif 6717 return; 6718 case SIR_RESEL_NO_MSG_IN: 6719 case SIR_RESEL_NO_IDENTIFY: 6720 /* 6721 ** If devices reselecting without sending an IDENTIFY 6722 ** message still exist, this should help. 6723 ** We just assume lun=0, 1 CCB, no tag. 6724 */ 6725 if (tp->lp[0]) { 6726 OUTL_DSP (scr_to_cpu(tp->lp[0]->jump_ccb[0])); 6727 return; 6728 } 6729 case SIR_RESEL_BAD_TARGET: /* Will send a TARGET RESET message */ 6730 case SIR_RESEL_BAD_LUN: /* Will send a TARGET RESET message */ 6731 case SIR_RESEL_BAD_I_T_L_Q: /* Will send an ABORT TAG message */ 6732 case SIR_RESEL_BAD_I_T_L: /* Will send an ABORT message */ 6733 printk ("%s:%d: SIR %d, " 6734 "incorrect nexus identification on reselection\n", 6735 ncr_name (np), target, num); 6736 goto out; 6737 case SIR_DONE_OVERFLOW: 6738 printk ("%s:%d: SIR %d, " 6739 "CCB done queue overflow\n", 6740 ncr_name (np), target, num); 6741 goto out; 6742 case SIR_BAD_STATUS: 6743 cp = np->header.cp; 6744 if (!cp || CCB_PHYS (cp, phys) != dsa) 6745 goto out; 6746 ncr_sir_to_redo(np, num, cp); 6747 return; 6748 default: 6749 /* 6750 ** lookup the ccb 6751 */ 6752 cp = np->ccb; 6753 while (cp && (CCB_PHYS (cp, phys) != dsa)) 6754 cp = cp->link_ccb; 6755 6756 BUG_ON(!cp); 6757 BUG_ON(cp != np->header.cp); 6758 6759 if (!cp || cp != np->header.cp) 6760 goto out; 6761 } 6762 6763 switch (num) { 6764 /*----------------------------------------------------------------------------- 6765 ** 6766 ** Was Sie schon immer ueber transfermode negotiation wissen wollten ... 6767 ** ("Everything you've always wanted to know about transfer mode 6768 ** negotiation") 6769 ** 6770 ** We try to negotiate sync and wide transfer only after 6771 ** a successful inquire command. We look at byte 7 of the 6772 ** inquire data to determine the capabilities of the target. 6773 ** 6774 ** When we try to negotiate, we append the negotiation message 6775 ** to the identify and (maybe) simple tag message. 6776 ** The host status field is set to HS_NEGOTIATE to mark this 6777 ** situation. 6778 ** 6779 ** If the target doesn't answer this message immediately 6780 ** (as required by the standard), the SIR_NEGO_FAIL interrupt 6781 ** will be raised eventually. 6782 ** The handler removes the HS_NEGOTIATE status, and sets the 6783 ** negotiated value to the default (async / nowide). 6784 ** 6785 ** If we receive a matching answer immediately, we check it 6786 ** for validity, and set the values. 6787 ** 6788 ** If we receive a Reject message immediately, we assume the 6789 ** negotiation has failed, and fall back to standard values. 6790 ** 6791 ** If we receive a negotiation message while not in HS_NEGOTIATE 6792 ** state, it's a target initiated negotiation. We prepare a 6793 ** (hopefully) valid answer, set our parameters, and send back 6794 ** this answer to the target. 6795 ** 6796 ** If the target doesn't fetch the answer (no message out phase), 6797 ** we assume the negotiation has failed, and fall back to default 6798 ** settings. 6799 ** 6800 ** When we set the values, we adjust them in all ccbs belonging 6801 ** to this target, in the controller's register, and in the "phys" 6802 ** field of the controller's struct ncb. 6803 ** 6804 ** Possible cases: hs sir msg_in value send goto 6805 ** We try to negotiate: 6806 ** -> target doesn't msgin NEG FAIL noop defa. - dispatch 6807 ** -> target rejected our msg NEG FAIL reject defa. - dispatch 6808 ** -> target answered (ok) NEG SYNC sdtr set - clrack 6809 ** -> target answered (!ok) NEG SYNC sdtr defa. REJ--->msg_bad 6810 ** -> target answered (ok) NEG WIDE wdtr set - clrack 6811 ** -> target answered (!ok) NEG WIDE wdtr defa. REJ--->msg_bad 6812 ** -> any other msgin NEG FAIL noop defa. - dispatch 6813 ** 6814 ** Target tries to negotiate: 6815 ** -> incoming message --- SYNC sdtr set SDTR - 6816 ** -> incoming message --- WIDE wdtr set WDTR - 6817 ** We sent our answer: 6818 ** -> target doesn't msgout --- PROTO ? defa. - dispatch 6819 ** 6820 **----------------------------------------------------------------------------- 6821 */ 6822 6823 case SIR_NEGO_FAILED: 6824 /*------------------------------------------------------- 6825 ** 6826 ** Negotiation failed. 6827 ** Target doesn't send an answer message, 6828 ** or target rejected our message. 6829 ** 6830 ** Remove negotiation request. 6831 ** 6832 **------------------------------------------------------- 6833 */ 6834 OUTB (HS_PRT, HS_BUSY); 6835 6836 /* fall through */ 6837 6838 case SIR_NEGO_PROTO: 6839 /*------------------------------------------------------- 6840 ** 6841 ** Negotiation failed. 6842 ** Target doesn't fetch the answer message. 6843 ** 6844 **------------------------------------------------------- 6845 */ 6846 6847 if (DEBUG_FLAGS & DEBUG_NEGO) { 6848 PRINT_ADDR(cp->cmd, "negotiation failed sir=%x " 6849 "status=%x.\n", num, cp->nego_status); 6850 } 6851 6852 /* 6853 ** any error in negotiation: 6854 ** fall back to default mode. 6855 */ 6856 switch (cp->nego_status) { 6857 6858 case NS_SYNC: 6859 spi_period(starget) = 0; 6860 spi_offset(starget) = 0; 6861 ncr_setsync (np, cp, 0, 0xe0); 6862 break; 6863 6864 case NS_WIDE: 6865 spi_width(starget) = 0; 6866 ncr_setwide (np, cp, 0, 0); 6867 break; 6868 6869 } 6870 np->msgin [0] = NOP; 6871 np->msgout[0] = NOP; 6872 cp->nego_status = 0; 6873 break; 6874 6875 case SIR_NEGO_SYNC: 6876 if (DEBUG_FLAGS & DEBUG_NEGO) { 6877 ncr_print_msg(cp, "sync msgin", np->msgin); 6878 } 6879 6880 chg = 0; 6881 per = np->msgin[3]; 6882 ofs = np->msgin[4]; 6883 if (ofs==0) per=255; 6884 6885 /* 6886 ** if target sends SDTR message, 6887 ** it CAN transfer synch. 6888 */ 6889 6890 if (ofs && starget) 6891 spi_support_sync(starget) = 1; 6892 6893 /* 6894 ** check values against driver limits. 6895 */ 6896 6897 if (per < np->minsync) 6898 {chg = 1; per = np->minsync;} 6899 if (per < tp->minsync) 6900 {chg = 1; per = tp->minsync;} 6901 if (ofs > tp->maxoffs) 6902 {chg = 1; ofs = tp->maxoffs;} 6903 6904 /* 6905 ** Check against controller limits. 6906 */ 6907 fak = 7; 6908 scntl3 = 0; 6909 if (ofs != 0) { 6910 ncr_getsync(np, per, &fak, &scntl3); 6911 if (fak > 7) { 6912 chg = 1; 6913 ofs = 0; 6914 } 6915 } 6916 if (ofs == 0) { 6917 fak = 7; 6918 per = 0; 6919 scntl3 = 0; 6920 tp->minsync = 0; 6921 } 6922 6923 if (DEBUG_FLAGS & DEBUG_NEGO) { 6924 PRINT_ADDR(cp->cmd, "sync: per=%d scntl3=0x%x ofs=%d " 6925 "fak=%d chg=%d.\n", per, scntl3, ofs, fak, chg); 6926 } 6927 6928 if (INB (HS_PRT) == HS_NEGOTIATE) { 6929 OUTB (HS_PRT, HS_BUSY); 6930 switch (cp->nego_status) { 6931 6932 case NS_SYNC: 6933 /* This was an answer message */ 6934 if (chg) { 6935 /* Answer wasn't acceptable. */ 6936 spi_period(starget) = 0; 6937 spi_offset(starget) = 0; 6938 ncr_setsync(np, cp, 0, 0xe0); 6939 OUTL_DSP(NCB_SCRIPT_PHYS (np, msg_bad)); 6940 } else { 6941 /* Answer is ok. */ 6942 spi_period(starget) = per; 6943 spi_offset(starget) = ofs; 6944 ncr_setsync(np, cp, scntl3, (fak<<5)|ofs); 6945 OUTL_DSP(NCB_SCRIPT_PHYS (np, clrack)); 6946 } 6947 return; 6948 6949 case NS_WIDE: 6950 spi_width(starget) = 0; 6951 ncr_setwide(np, cp, 0, 0); 6952 break; 6953 } 6954 } 6955 6956 /* 6957 ** It was a request. Set value and 6958 ** prepare an answer message 6959 */ 6960 6961 spi_period(starget) = per; 6962 spi_offset(starget) = ofs; 6963 ncr_setsync(np, cp, scntl3, (fak<<5)|ofs); 6964 6965 spi_populate_sync_msg(np->msgout, per, ofs); 6966 cp->nego_status = NS_SYNC; 6967 6968 if (DEBUG_FLAGS & DEBUG_NEGO) { 6969 ncr_print_msg(cp, "sync msgout", np->msgout); 6970 } 6971 6972 if (!ofs) { 6973 OUTL_DSP (NCB_SCRIPT_PHYS (np, msg_bad)); 6974 return; 6975 } 6976 np->msgin [0] = NOP; 6977 6978 break; 6979 6980 case SIR_NEGO_WIDE: 6981 /* 6982 ** Wide request message received. 6983 */ 6984 if (DEBUG_FLAGS & DEBUG_NEGO) { 6985 ncr_print_msg(cp, "wide msgin", np->msgin); 6986 } 6987 6988 /* 6989 ** get requested values. 6990 */ 6991 6992 chg = 0; 6993 wide = np->msgin[3]; 6994 6995 /* 6996 ** if target sends WDTR message, 6997 ** it CAN transfer wide. 6998 */ 6999 7000 if (wide && starget) 7001 spi_support_wide(starget) = 1; 7002 7003 /* 7004 ** check values against driver limits. 7005 */ 7006 7007 if (wide > tp->usrwide) 7008 {chg = 1; wide = tp->usrwide;} 7009 7010 if (DEBUG_FLAGS & DEBUG_NEGO) { 7011 PRINT_ADDR(cp->cmd, "wide: wide=%d chg=%d.\n", wide, 7012 chg); 7013 } 7014 7015 if (INB (HS_PRT) == HS_NEGOTIATE) { 7016 OUTB (HS_PRT, HS_BUSY); 7017 switch (cp->nego_status) { 7018 7019 case NS_WIDE: 7020 /* 7021 ** This was an answer message 7022 */ 7023 if (chg) { 7024 /* Answer wasn't acceptable. */ 7025 spi_width(starget) = 0; 7026 ncr_setwide(np, cp, 0, 1); 7027 OUTL_DSP (NCB_SCRIPT_PHYS (np, msg_bad)); 7028 } else { 7029 /* Answer is ok. */ 7030 spi_width(starget) = wide; 7031 ncr_setwide(np, cp, wide, 1); 7032 OUTL_DSP (NCB_SCRIPT_PHYS (np, clrack)); 7033 } 7034 return; 7035 7036 case NS_SYNC: 7037 spi_period(starget) = 0; 7038 spi_offset(starget) = 0; 7039 ncr_setsync(np, cp, 0, 0xe0); 7040 break; 7041 } 7042 } 7043 7044 /* 7045 ** It was a request, set value and 7046 ** prepare an answer message 7047 */ 7048 7049 spi_width(starget) = wide; 7050 ncr_setwide(np, cp, wide, 1); 7051 spi_populate_width_msg(np->msgout, wide); 7052 7053 np->msgin [0] = NOP; 7054 7055 cp->nego_status = NS_WIDE; 7056 7057 if (DEBUG_FLAGS & DEBUG_NEGO) { 7058 ncr_print_msg(cp, "wide msgout", np->msgin); 7059 } 7060 break; 7061 7062 /*-------------------------------------------------------------------- 7063 ** 7064 ** Processing of special messages 7065 ** 7066 **-------------------------------------------------------------------- 7067 */ 7068 7069 case SIR_REJECT_RECEIVED: 7070 /*----------------------------------------------- 7071 ** 7072 ** We received a MESSAGE_REJECT. 7073 ** 7074 **----------------------------------------------- 7075 */ 7076 7077 PRINT_ADDR(cp->cmd, "MESSAGE_REJECT received (%x:%x).\n", 7078 (unsigned)scr_to_cpu(np->lastmsg), np->msgout[0]); 7079 break; 7080 7081 case SIR_REJECT_SENT: 7082 /*----------------------------------------------- 7083 ** 7084 ** We received an unknown message 7085 ** 7086 **----------------------------------------------- 7087 */ 7088 7089 ncr_print_msg(cp, "MESSAGE_REJECT sent for", np->msgin); 7090 break; 7091 7092 /*-------------------------------------------------------------------- 7093 ** 7094 ** Processing of special messages 7095 ** 7096 **-------------------------------------------------------------------- 7097 */ 7098 7099 case SIR_IGN_RESIDUE: 7100 /*----------------------------------------------- 7101 ** 7102 ** We received an IGNORE RESIDUE message, 7103 ** which couldn't be handled by the script. 7104 ** 7105 **----------------------------------------------- 7106 */ 7107 7108 PRINT_ADDR(cp->cmd, "IGNORE_WIDE_RESIDUE received, but not yet " 7109 "implemented.\n"); 7110 break; 7111 #if 0 7112 case SIR_MISSING_SAVE: 7113 /*----------------------------------------------- 7114 ** 7115 ** We received an DISCONNECT message, 7116 ** but the datapointer wasn't saved before. 7117 ** 7118 **----------------------------------------------- 7119 */ 7120 7121 PRINT_ADDR(cp->cmd, "DISCONNECT received, but datapointer " 7122 "not saved: data=%x save=%x goal=%x.\n", 7123 (unsigned) INL (nc_temp), 7124 (unsigned) scr_to_cpu(np->header.savep), 7125 (unsigned) scr_to_cpu(np->header.goalp)); 7126 break; 7127 #endif 7128 } 7129 7130 out: 7131 OUTONB_STD (); 7132 } 7133 7134 /*========================================================== 7135 ** 7136 ** 7137 ** Acquire a control block 7138 ** 7139 ** 7140 **========================================================== 7141 */ 7142 7143 static struct ccb *ncr_get_ccb(struct ncb *np, struct scsi_cmnd *cmd) 7144 { 7145 u_char tn = cmd->device->id; 7146 u_char ln = cmd->device->lun; 7147 struct tcb *tp = &np->target[tn]; 7148 struct lcb *lp = tp->lp[ln]; 7149 u_char tag = NO_TAG; 7150 struct ccb *cp = NULL; 7151 7152 /* 7153 ** Lun structure available ? 7154 */ 7155 if (lp) { 7156 struct list_head *qp; 7157 /* 7158 ** Keep from using more tags than we can handle. 7159 */ 7160 if (lp->usetags && lp->busyccbs >= lp->maxnxs) 7161 return NULL; 7162 7163 /* 7164 ** Allocate a new CCB if needed. 7165 */ 7166 if (list_empty(&lp->free_ccbq)) 7167 ncr_alloc_ccb(np, tn, ln); 7168 7169 /* 7170 ** Look for free CCB 7171 */ 7172 qp = ncr_list_pop(&lp->free_ccbq); 7173 if (qp) { 7174 cp = list_entry(qp, struct ccb, link_ccbq); 7175 if (cp->magic) { 7176 PRINT_ADDR(cmd, "ccb free list corrupted " 7177 "(@%p)\n", cp); 7178 cp = NULL; 7179 } else { 7180 list_add_tail(qp, &lp->wait_ccbq); 7181 ++lp->busyccbs; 7182 } 7183 } 7184 7185 /* 7186 ** If a CCB is available, 7187 ** Get a tag for this nexus if required. 7188 */ 7189 if (cp) { 7190 if (lp->usetags) 7191 tag = lp->cb_tags[lp->ia_tag]; 7192 } 7193 else if (lp->actccbs > 0) 7194 return NULL; 7195 } 7196 7197 /* 7198 ** if nothing available, take the default. 7199 */ 7200 if (!cp) 7201 cp = np->ccb; 7202 7203 /* 7204 ** Wait until available. 7205 */ 7206 #if 0 7207 while (cp->magic) { 7208 if (flags & SCSI_NOSLEEP) break; 7209 if (tsleep ((caddr_t)cp, PRIBIO|PCATCH, "ncr", 0)) 7210 break; 7211 } 7212 #endif 7213 7214 if (cp->magic) 7215 return NULL; 7216 7217 cp->magic = 1; 7218 7219 /* 7220 ** Move to next available tag if tag used. 7221 */ 7222 if (lp) { 7223 if (tag != NO_TAG) { 7224 ++lp->ia_tag; 7225 if (lp->ia_tag == MAX_TAGS) 7226 lp->ia_tag = 0; 7227 lp->tags_umap |= (((tagmap_t) 1) << tag); 7228 } 7229 } 7230 7231 /* 7232 ** Remember all informations needed to free this CCB. 7233 */ 7234 cp->tag = tag; 7235 cp->target = tn; 7236 cp->lun = ln; 7237 7238 if (DEBUG_FLAGS & DEBUG_TAGS) { 7239 PRINT_ADDR(cmd, "ccb @%p using tag %d.\n", cp, tag); 7240 } 7241 7242 return cp; 7243 } 7244 7245 /*========================================================== 7246 ** 7247 ** 7248 ** Release one control block 7249 ** 7250 ** 7251 **========================================================== 7252 */ 7253 7254 static void ncr_free_ccb (struct ncb *np, struct ccb *cp) 7255 { 7256 struct tcb *tp = &np->target[cp->target]; 7257 struct lcb *lp = tp->lp[cp->lun]; 7258 7259 if (DEBUG_FLAGS & DEBUG_TAGS) { 7260 PRINT_ADDR(cp->cmd, "ccb @%p freeing tag %d.\n", cp, cp->tag); 7261 } 7262 7263 /* 7264 ** If lun control block available, 7265 ** decrement active commands and increment credit, 7266 ** free the tag if any and remove the JUMP for reselect. 7267 */ 7268 if (lp) { 7269 if (cp->tag != NO_TAG) { 7270 lp->cb_tags[lp->if_tag++] = cp->tag; 7271 if (lp->if_tag == MAX_TAGS) 7272 lp->if_tag = 0; 7273 lp->tags_umap &= ~(((tagmap_t) 1) << cp->tag); 7274 lp->tags_smap &= lp->tags_umap; 7275 lp->jump_ccb[cp->tag] = 7276 cpu_to_scr(NCB_SCRIPTH_PHYS(np, bad_i_t_l_q)); 7277 } else { 7278 lp->jump_ccb[0] = 7279 cpu_to_scr(NCB_SCRIPTH_PHYS(np, bad_i_t_l)); 7280 } 7281 } 7282 7283 /* 7284 ** Make this CCB available. 7285 */ 7286 7287 if (lp) { 7288 if (cp != np->ccb) 7289 list_move(&cp->link_ccbq, &lp->free_ccbq); 7290 --lp->busyccbs; 7291 if (cp->queued) { 7292 --lp->queuedccbs; 7293 } 7294 } 7295 cp -> host_status = HS_IDLE; 7296 cp -> magic = 0; 7297 if (cp->queued) { 7298 --np->queuedccbs; 7299 cp->queued = 0; 7300 } 7301 7302 #if 0 7303 if (cp == np->ccb) 7304 wakeup ((caddr_t) cp); 7305 #endif 7306 } 7307 7308 7309 #define ncr_reg_bus_addr(r) (np->paddr + offsetof (struct ncr_reg, r)) 7310 7311 /*------------------------------------------------------------------------ 7312 ** Initialize the fixed part of a CCB structure. 7313 **------------------------------------------------------------------------ 7314 **------------------------------------------------------------------------ 7315 */ 7316 static void ncr_init_ccb(struct ncb *np, struct ccb *cp) 7317 { 7318 ncrcmd copy_4 = np->features & FE_PFEN ? SCR_COPY(4) : SCR_COPY_F(4); 7319 7320 /* 7321 ** Remember virtual and bus address of this ccb. 7322 */ 7323 cp->p_ccb = vtobus(cp); 7324 cp->phys.header.cp = cp; 7325 7326 /* 7327 ** This allows list_del to work for the default ccb. 7328 */ 7329 INIT_LIST_HEAD(&cp->link_ccbq); 7330 7331 /* 7332 ** Initialyze the start and restart launch script. 7333 ** 7334 ** COPY(4) @(...p_phys), @(dsa) 7335 ** JUMP @(sched_point) 7336 */ 7337 cp->start.setup_dsa[0] = cpu_to_scr(copy_4); 7338 cp->start.setup_dsa[1] = cpu_to_scr(CCB_PHYS(cp, start.p_phys)); 7339 cp->start.setup_dsa[2] = cpu_to_scr(ncr_reg_bus_addr(nc_dsa)); 7340 cp->start.schedule.l_cmd = cpu_to_scr(SCR_JUMP); 7341 cp->start.p_phys = cpu_to_scr(CCB_PHYS(cp, phys)); 7342 7343 memcpy(&cp->restart, &cp->start, sizeof(cp->restart)); 7344 7345 cp->start.schedule.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, idle)); 7346 cp->restart.schedule.l_paddr = cpu_to_scr(NCB_SCRIPTH_PHYS (np, abort)); 7347 } 7348 7349 7350 /*------------------------------------------------------------------------ 7351 ** Allocate a CCB and initialize its fixed part. 7352 **------------------------------------------------------------------------ 7353 **------------------------------------------------------------------------ 7354 */ 7355 static void ncr_alloc_ccb(struct ncb *np, u_char tn, u_char ln) 7356 { 7357 struct tcb *tp = &np->target[tn]; 7358 struct lcb *lp = tp->lp[ln]; 7359 struct ccb *cp = NULL; 7360 7361 /* 7362 ** Allocate memory for this CCB. 7363 */ 7364 cp = m_calloc_dma(sizeof(struct ccb), "CCB"); 7365 if (!cp) 7366 return; 7367 7368 /* 7369 ** Count it and initialyze it. 7370 */ 7371 lp->actccbs++; 7372 np->actccbs++; 7373 memset(cp, 0, sizeof (*cp)); 7374 ncr_init_ccb(np, cp); 7375 7376 /* 7377 ** Chain into wakeup list and free ccb queue and take it 7378 ** into account for tagged commands. 7379 */ 7380 cp->link_ccb = np->ccb->link_ccb; 7381 np->ccb->link_ccb = cp; 7382 7383 list_add(&cp->link_ccbq, &lp->free_ccbq); 7384 } 7385 7386 /*========================================================== 7387 ** 7388 ** 7389 ** Allocation of resources for Targets/Luns/Tags. 7390 ** 7391 ** 7392 **========================================================== 7393 */ 7394 7395 7396 /*------------------------------------------------------------------------ 7397 ** Target control block initialisation. 7398 **------------------------------------------------------------------------ 7399 ** This data structure is fully initialized after a SCSI command 7400 ** has been successfully completed for this target. 7401 ** It contains a SCRIPT that is called on target reselection. 7402 **------------------------------------------------------------------------ 7403 */ 7404 static void ncr_init_tcb (struct ncb *np, u_char tn) 7405 { 7406 struct tcb *tp = &np->target[tn]; 7407 ncrcmd copy_1 = np->features & FE_PFEN ? SCR_COPY(1) : SCR_COPY_F(1); 7408 int th = tn & 3; 7409 int i; 7410 7411 /* 7412 ** Jump to next tcb if SFBR does not match this target. 7413 ** JUMP IF (SFBR != #target#), @(next tcb) 7414 */ 7415 tp->jump_tcb.l_cmd = 7416 cpu_to_scr((SCR_JUMP ^ IFFALSE (DATA (0x80 + tn)))); 7417 tp->jump_tcb.l_paddr = np->jump_tcb[th].l_paddr; 7418 7419 /* 7420 ** Load the synchronous transfer register. 7421 ** COPY @(tp->sval), @(sxfer) 7422 */ 7423 tp->getscr[0] = cpu_to_scr(copy_1); 7424 tp->getscr[1] = cpu_to_scr(vtobus (&tp->sval)); 7425 #ifdef SCSI_NCR_BIG_ENDIAN 7426 tp->getscr[2] = cpu_to_scr(ncr_reg_bus_addr(nc_sxfer) ^ 3); 7427 #else 7428 tp->getscr[2] = cpu_to_scr(ncr_reg_bus_addr(nc_sxfer)); 7429 #endif 7430 7431 /* 7432 ** Load the timing register. 7433 ** COPY @(tp->wval), @(scntl3) 7434 */ 7435 tp->getscr[3] = cpu_to_scr(copy_1); 7436 tp->getscr[4] = cpu_to_scr(vtobus (&tp->wval)); 7437 #ifdef SCSI_NCR_BIG_ENDIAN 7438 tp->getscr[5] = cpu_to_scr(ncr_reg_bus_addr(nc_scntl3) ^ 3); 7439 #else 7440 tp->getscr[5] = cpu_to_scr(ncr_reg_bus_addr(nc_scntl3)); 7441 #endif 7442 7443 /* 7444 ** Get the IDENTIFY message and the lun. 7445 ** CALL @script(resel_lun) 7446 */ 7447 tp->call_lun.l_cmd = cpu_to_scr(SCR_CALL); 7448 tp->call_lun.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, resel_lun)); 7449 7450 /* 7451 ** Look for the lun control block of this nexus. 7452 ** For i = 0 to 3 7453 ** JUMP ^ IFTRUE (MASK (i, 3)), @(next_lcb) 7454 */ 7455 for (i = 0 ; i < 4 ; i++) { 7456 tp->jump_lcb[i].l_cmd = 7457 cpu_to_scr((SCR_JUMP ^ IFTRUE (MASK (i, 3)))); 7458 tp->jump_lcb[i].l_paddr = 7459 cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_identify)); 7460 } 7461 7462 /* 7463 ** Link this target control block to the JUMP chain. 7464 */ 7465 np->jump_tcb[th].l_paddr = cpu_to_scr(vtobus (&tp->jump_tcb)); 7466 7467 /* 7468 ** These assert's should be moved at driver initialisations. 7469 */ 7470 #ifdef SCSI_NCR_BIG_ENDIAN 7471 BUG_ON(((offsetof(struct ncr_reg, nc_sxfer) ^ 7472 offsetof(struct tcb , sval )) &3) != 3); 7473 BUG_ON(((offsetof(struct ncr_reg, nc_scntl3) ^ 7474 offsetof(struct tcb , wval )) &3) != 3); 7475 #else 7476 BUG_ON(((offsetof(struct ncr_reg, nc_sxfer) ^ 7477 offsetof(struct tcb , sval )) &3) != 0); 7478 BUG_ON(((offsetof(struct ncr_reg, nc_scntl3) ^ 7479 offsetof(struct tcb , wval )) &3) != 0); 7480 #endif 7481 } 7482 7483 7484 /*------------------------------------------------------------------------ 7485 ** Lun control block allocation and initialization. 7486 **------------------------------------------------------------------------ 7487 ** This data structure is allocated and initialized after a SCSI 7488 ** command has been successfully completed for this target/lun. 7489 **------------------------------------------------------------------------ 7490 */ 7491 static struct lcb *ncr_alloc_lcb (struct ncb *np, u_char tn, u_char ln) 7492 { 7493 struct tcb *tp = &np->target[tn]; 7494 struct lcb *lp = tp->lp[ln]; 7495 ncrcmd copy_4 = np->features & FE_PFEN ? SCR_COPY(4) : SCR_COPY_F(4); 7496 int lh = ln & 3; 7497 7498 /* 7499 ** Already done, return. 7500 */ 7501 if (lp) 7502 return lp; 7503 7504 /* 7505 ** Allocate the lcb. 7506 */ 7507 lp = m_calloc_dma(sizeof(struct lcb), "LCB"); 7508 if (!lp) 7509 goto fail; 7510 memset(lp, 0, sizeof(*lp)); 7511 tp->lp[ln] = lp; 7512 7513 /* 7514 ** Initialize the target control block if not yet. 7515 */ 7516 if (!tp->jump_tcb.l_cmd) 7517 ncr_init_tcb(np, tn); 7518 7519 /* 7520 ** Initialize the CCB queue headers. 7521 */ 7522 INIT_LIST_HEAD(&lp->free_ccbq); 7523 INIT_LIST_HEAD(&lp->busy_ccbq); 7524 INIT_LIST_HEAD(&lp->wait_ccbq); 7525 INIT_LIST_HEAD(&lp->skip_ccbq); 7526 7527 /* 7528 ** Set max CCBs to 1 and use the default 1 entry 7529 ** jump table by default. 7530 */ 7531 lp->maxnxs = 1; 7532 lp->jump_ccb = &lp->jump_ccb_0; 7533 lp->p_jump_ccb = cpu_to_scr(vtobus(lp->jump_ccb)); 7534 7535 /* 7536 ** Initilialyze the reselect script: 7537 ** 7538 ** Jump to next lcb if SFBR does not match this lun. 7539 ** Load TEMP with the CCB direct jump table bus address. 7540 ** Get the SIMPLE TAG message and the tag. 7541 ** 7542 ** JUMP IF (SFBR != #lun#), @(next lcb) 7543 ** COPY @(lp->p_jump_ccb), @(temp) 7544 ** JUMP @script(resel_notag) 7545 */ 7546 lp->jump_lcb.l_cmd = 7547 cpu_to_scr((SCR_JUMP ^ IFFALSE (MASK (0x80+ln, 0xff)))); 7548 lp->jump_lcb.l_paddr = tp->jump_lcb[lh].l_paddr; 7549 7550 lp->load_jump_ccb[0] = cpu_to_scr(copy_4); 7551 lp->load_jump_ccb[1] = cpu_to_scr(vtobus (&lp->p_jump_ccb)); 7552 lp->load_jump_ccb[2] = cpu_to_scr(ncr_reg_bus_addr(nc_temp)); 7553 7554 lp->jump_tag.l_cmd = cpu_to_scr(SCR_JUMP); 7555 lp->jump_tag.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, resel_notag)); 7556 7557 /* 7558 ** Link this lun control block to the JUMP chain. 7559 */ 7560 tp->jump_lcb[lh].l_paddr = cpu_to_scr(vtobus (&lp->jump_lcb)); 7561 7562 /* 7563 ** Initialize command queuing control. 7564 */ 7565 lp->busyccbs = 1; 7566 lp->queuedccbs = 1; 7567 lp->queuedepth = 1; 7568 fail: 7569 return lp; 7570 } 7571 7572 7573 /*------------------------------------------------------------------------ 7574 ** Lun control block setup on INQUIRY data received. 7575 **------------------------------------------------------------------------ 7576 ** We only support WIDE, SYNC for targets and CMDQ for logical units. 7577 ** This setup is done on each INQUIRY since we are expecting user 7578 ** will play with CHANGE DEFINITION commands. :-) 7579 **------------------------------------------------------------------------ 7580 */ 7581 static struct lcb *ncr_setup_lcb (struct ncb *np, struct scsi_device *sdev) 7582 { 7583 unsigned char tn = sdev->id, ln = sdev->lun; 7584 struct tcb *tp = &np->target[tn]; 7585 struct lcb *lp = tp->lp[ln]; 7586 7587 /* If no lcb, try to allocate it. */ 7588 if (!lp && !(lp = ncr_alloc_lcb(np, tn, ln))) 7589 goto fail; 7590 7591 /* 7592 ** If unit supports tagged commands, allocate the 7593 ** CCB JUMP table if not yet. 7594 */ 7595 if (sdev->tagged_supported && lp->jump_ccb == &lp->jump_ccb_0) { 7596 int i; 7597 lp->jump_ccb = m_calloc_dma(256, "JUMP_CCB"); 7598 if (!lp->jump_ccb) { 7599 lp->jump_ccb = &lp->jump_ccb_0; 7600 goto fail; 7601 } 7602 lp->p_jump_ccb = cpu_to_scr(vtobus(lp->jump_ccb)); 7603 for (i = 0 ; i < 64 ; i++) 7604 lp->jump_ccb[i] = 7605 cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_i_t_l_q)); 7606 for (i = 0 ; i < MAX_TAGS ; i++) 7607 lp->cb_tags[i] = i; 7608 lp->maxnxs = MAX_TAGS; 7609 lp->tags_stime = jiffies + 3*HZ; 7610 ncr_setup_tags (np, sdev); 7611 } 7612 7613 7614 fail: 7615 return lp; 7616 } 7617 7618 /*========================================================== 7619 ** 7620 ** 7621 ** Build Scatter Gather Block 7622 ** 7623 ** 7624 **========================================================== 7625 ** 7626 ** The transfer area may be scattered among 7627 ** several non adjacent physical pages. 7628 ** 7629 ** We may use MAX_SCATTER blocks. 7630 ** 7631 **---------------------------------------------------------- 7632 */ 7633 7634 /* 7635 ** We try to reduce the number of interrupts caused 7636 ** by unexpected phase changes due to disconnects. 7637 ** A typical harddisk may disconnect before ANY block. 7638 ** If we wanted to avoid unexpected phase changes at all 7639 ** we had to use a break point every 512 bytes. 7640 ** Of course the number of scatter/gather blocks is 7641 ** limited. 7642 ** Under Linux, the scatter/gatter blocks are provided by 7643 ** the generic driver. We just have to copy addresses and 7644 ** sizes to the data segment array. 7645 */ 7646 7647 static int ncr_scatter(struct ncb *np, struct ccb *cp, struct scsi_cmnd *cmd) 7648 { 7649 int segment = 0; 7650 int use_sg = scsi_sg_count(cmd); 7651 7652 cp->data_len = 0; 7653 7654 use_sg = map_scsi_sg_data(np, cmd); 7655 if (use_sg > 0) { 7656 struct scatterlist *sg; 7657 struct scr_tblmove *data; 7658 7659 if (use_sg > MAX_SCATTER) { 7660 unmap_scsi_data(np, cmd); 7661 return -1; 7662 } 7663 7664 data = &cp->phys.data[MAX_SCATTER - use_sg]; 7665 7666 scsi_for_each_sg(cmd, sg, use_sg, segment) { 7667 dma_addr_t baddr = sg_dma_address(sg); 7668 unsigned int len = sg_dma_len(sg); 7669 7670 ncr_build_sge(np, &data[segment], baddr, len); 7671 cp->data_len += len; 7672 } 7673 } else 7674 segment = -2; 7675 7676 return segment; 7677 } 7678 7679 /*========================================================== 7680 ** 7681 ** 7682 ** Test the bus snoop logic :-( 7683 ** 7684 ** Has to be called with interrupts disabled. 7685 ** 7686 ** 7687 **========================================================== 7688 */ 7689 7690 static int __init ncr_regtest (struct ncb* np) 7691 { 7692 register volatile u32 data; 7693 /* 7694 ** ncr registers may NOT be cached. 7695 ** write 0xffffffff to a read only register area, 7696 ** and try to read it back. 7697 */ 7698 data = 0xffffffff; 7699 OUTL_OFF(offsetof(struct ncr_reg, nc_dstat), data); 7700 data = INL_OFF(offsetof(struct ncr_reg, nc_dstat)); 7701 #if 1 7702 if (data == 0xffffffff) { 7703 #else 7704 if ((data & 0xe2f0fffd) != 0x02000080) { 7705 #endif 7706 printk ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n", 7707 (unsigned) data); 7708 return (0x10); 7709 } 7710 return (0); 7711 } 7712 7713 static int __init ncr_snooptest (struct ncb* np) 7714 { 7715 u32 ncr_rd, ncr_wr, ncr_bk, host_rd, host_wr, pc; 7716 int i, err=0; 7717 if (np->reg) { 7718 err |= ncr_regtest (np); 7719 if (err) 7720 return (err); 7721 } 7722 7723 /* init */ 7724 pc = NCB_SCRIPTH_PHYS (np, snooptest); 7725 host_wr = 1; 7726 ncr_wr = 2; 7727 /* 7728 ** Set memory and register. 7729 */ 7730 np->ncr_cache = cpu_to_scr(host_wr); 7731 OUTL (nc_temp, ncr_wr); 7732 /* 7733 ** Start script (exchange values) 7734 */ 7735 OUTL_DSP (pc); 7736 /* 7737 ** Wait 'til done (with timeout) 7738 */ 7739 for (i=0; i<NCR_SNOOP_TIMEOUT; i++) 7740 if (INB(nc_istat) & (INTF|SIP|DIP)) 7741 break; 7742 /* 7743 ** Save termination position. 7744 */ 7745 pc = INL (nc_dsp); 7746 /* 7747 ** Read memory and register. 7748 */ 7749 host_rd = scr_to_cpu(np->ncr_cache); 7750 ncr_rd = INL (nc_scratcha); 7751 ncr_bk = INL (nc_temp); 7752 /* 7753 ** Reset ncr chip 7754 */ 7755 ncr_chip_reset(np, 100); 7756 /* 7757 ** check for timeout 7758 */ 7759 if (i>=NCR_SNOOP_TIMEOUT) { 7760 printk ("CACHE TEST FAILED: timeout.\n"); 7761 return (0x20); 7762 } 7763 /* 7764 ** Check termination position. 7765 */ 7766 if (pc != NCB_SCRIPTH_PHYS (np, snoopend)+8) { 7767 printk ("CACHE TEST FAILED: script execution failed.\n"); 7768 printk ("start=%08lx, pc=%08lx, end=%08lx\n", 7769 (u_long) NCB_SCRIPTH_PHYS (np, snooptest), (u_long) pc, 7770 (u_long) NCB_SCRIPTH_PHYS (np, snoopend) +8); 7771 return (0x40); 7772 } 7773 /* 7774 ** Show results. 7775 */ 7776 if (host_wr != ncr_rd) { 7777 printk ("CACHE TEST FAILED: host wrote %d, ncr read %d.\n", 7778 (int) host_wr, (int) ncr_rd); 7779 err |= 1; 7780 } 7781 if (host_rd != ncr_wr) { 7782 printk ("CACHE TEST FAILED: ncr wrote %d, host read %d.\n", 7783 (int) ncr_wr, (int) host_rd); 7784 err |= 2; 7785 } 7786 if (ncr_bk != ncr_wr) { 7787 printk ("CACHE TEST FAILED: ncr wrote %d, read back %d.\n", 7788 (int) ncr_wr, (int) ncr_bk); 7789 err |= 4; 7790 } 7791 return (err); 7792 } 7793 7794 /*========================================================== 7795 ** 7796 ** Determine the ncr's clock frequency. 7797 ** This is essential for the negotiation 7798 ** of the synchronous transfer rate. 7799 ** 7800 **========================================================== 7801 ** 7802 ** Note: we have to return the correct value. 7803 ** THERE IS NO SAFE DEFAULT VALUE. 7804 ** 7805 ** Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock. 7806 ** 53C860 and 53C875 rev. 1 support fast20 transfers but 7807 ** do not have a clock doubler and so are provided with a 7808 ** 80 MHz clock. All other fast20 boards incorporate a doubler 7809 ** and so should be delivered with a 40 MHz clock. 7810 ** The future fast40 chips (895/895) use a 40 Mhz base clock 7811 ** and provide a clock quadrupler (160 Mhz). The code below 7812 ** tries to deal as cleverly as possible with all this stuff. 7813 ** 7814 **---------------------------------------------------------- 7815 */ 7816 7817 /* 7818 * Select NCR SCSI clock frequency 7819 */ 7820 static void ncr_selectclock(struct ncb *np, u_char scntl3) 7821 { 7822 if (np->multiplier < 2) { 7823 OUTB(nc_scntl3, scntl3); 7824 return; 7825 } 7826 7827 if (bootverbose >= 2) 7828 printk ("%s: enabling clock multiplier\n", ncr_name(np)); 7829 7830 OUTB(nc_stest1, DBLEN); /* Enable clock multiplier */ 7831 if (np->multiplier > 2) { /* Poll bit 5 of stest4 for quadrupler */ 7832 int i = 20; 7833 while (!(INB(nc_stest4) & LCKFRQ) && --i > 0) 7834 udelay(20); 7835 if (!i) 7836 printk("%s: the chip cannot lock the frequency\n", ncr_name(np)); 7837 } else /* Wait 20 micro-seconds for doubler */ 7838 udelay(20); 7839 OUTB(nc_stest3, HSC); /* Halt the scsi clock */ 7840 OUTB(nc_scntl3, scntl3); 7841 OUTB(nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */ 7842 OUTB(nc_stest3, 0x00); /* Restart scsi clock */ 7843 } 7844 7845 7846 /* 7847 * calculate NCR SCSI clock frequency (in KHz) 7848 */ 7849 static unsigned __init ncrgetfreq (struct ncb *np, int gen) 7850 { 7851 unsigned ms = 0; 7852 char count = 0; 7853 7854 /* 7855 * Measure GEN timer delay in order 7856 * to calculate SCSI clock frequency 7857 * 7858 * This code will never execute too 7859 * many loop iterations (if DELAY is 7860 * reasonably correct). It could get 7861 * too low a delay (too high a freq.) 7862 * if the CPU is slow executing the 7863 * loop for some reason (an NMI, for 7864 * example). For this reason we will 7865 * if multiple measurements are to be 7866 * performed trust the higher delay 7867 * (lower frequency returned). 7868 */ 7869 OUTB (nc_stest1, 0); /* make sure clock doubler is OFF */ 7870 OUTW (nc_sien , 0); /* mask all scsi interrupts */ 7871 (void) INW (nc_sist); /* clear pending scsi interrupt */ 7872 OUTB (nc_dien , 0); /* mask all dma interrupts */ 7873 (void) INW (nc_sist); /* another one, just to be sure :) */ 7874 OUTB (nc_scntl3, 4); /* set pre-scaler to divide by 3 */ 7875 OUTB (nc_stime1, 0); /* disable general purpose timer */ 7876 OUTB (nc_stime1, gen); /* set to nominal delay of 1<<gen * 125us */ 7877 while (!(INW(nc_sist) & GEN) && ms++ < 100000) { 7878 for (count = 0; count < 10; count ++) 7879 udelay(100); /* count ms */ 7880 } 7881 OUTB (nc_stime1, 0); /* disable general purpose timer */ 7882 /* 7883 * set prescaler to divide by whatever 0 means 7884 * 0 ought to choose divide by 2, but appears 7885 * to set divide by 3.5 mode in my 53c810 ... 7886 */ 7887 OUTB (nc_scntl3, 0); 7888 7889 if (bootverbose >= 2) 7890 printk ("%s: Delay (GEN=%d): %u msec\n", ncr_name(np), gen, ms); 7891 /* 7892 * adjust for prescaler, and convert into KHz 7893 */ 7894 return ms ? ((1 << gen) * 4340) / ms : 0; 7895 } 7896 7897 /* 7898 * Get/probe NCR SCSI clock frequency 7899 */ 7900 static void __init ncr_getclock (struct ncb *np, int mult) 7901 { 7902 unsigned char scntl3 = INB(nc_scntl3); 7903 unsigned char stest1 = INB(nc_stest1); 7904 unsigned f1; 7905 7906 np->multiplier = 1; 7907 f1 = 40000; 7908 7909 /* 7910 ** True with 875 or 895 with clock multiplier selected 7911 */ 7912 if (mult > 1 && (stest1 & (DBLEN+DBLSEL)) == DBLEN+DBLSEL) { 7913 if (bootverbose >= 2) 7914 printk ("%s: clock multiplier found\n", ncr_name(np)); 7915 np->multiplier = mult; 7916 } 7917 7918 /* 7919 ** If multiplier not found or scntl3 not 7,5,3, 7920 ** reset chip and get frequency from general purpose timer. 7921 ** Otherwise trust scntl3 BIOS setting. 7922 */ 7923 if (np->multiplier != mult || (scntl3 & 7) < 3 || !(scntl3 & 1)) { 7924 unsigned f2; 7925 7926 ncr_chip_reset(np, 5); 7927 7928 (void) ncrgetfreq (np, 11); /* throw away first result */ 7929 f1 = ncrgetfreq (np, 11); 7930 f2 = ncrgetfreq (np, 11); 7931 7932 if(bootverbose) 7933 printk ("%s: NCR clock is %uKHz, %uKHz\n", ncr_name(np), f1, f2); 7934 7935 if (f1 > f2) f1 = f2; /* trust lower result */ 7936 7937 if (f1 < 45000) f1 = 40000; 7938 else if (f1 < 55000) f1 = 50000; 7939 else f1 = 80000; 7940 7941 if (f1 < 80000 && mult > 1) { 7942 if (bootverbose >= 2) 7943 printk ("%s: clock multiplier assumed\n", ncr_name(np)); 7944 np->multiplier = mult; 7945 } 7946 } else { 7947 if ((scntl3 & 7) == 3) f1 = 40000; 7948 else if ((scntl3 & 7) == 5) f1 = 80000; 7949 else f1 = 160000; 7950 7951 f1 /= np->multiplier; 7952 } 7953 7954 /* 7955 ** Compute controller synchronous parameters. 7956 */ 7957 f1 *= np->multiplier; 7958 np->clock_khz = f1; 7959 } 7960 7961 /*===================== LINUX ENTRY POINTS SECTION ==========================*/ 7962 7963 static int ncr53c8xx_slave_alloc(struct scsi_device *device) 7964 { 7965 struct Scsi_Host *host = device->host; 7966 struct ncb *np = ((struct host_data *) host->hostdata)->ncb; 7967 struct tcb *tp = &np->target[device->id]; 7968 tp->starget = device->sdev_target; 7969 7970 return 0; 7971 } 7972 7973 static int ncr53c8xx_slave_configure(struct scsi_device *device) 7974 { 7975 struct Scsi_Host *host = device->host; 7976 struct ncb *np = ((struct host_data *) host->hostdata)->ncb; 7977 struct tcb *tp = &np->target[device->id]; 7978 struct lcb *lp = tp->lp[device->lun]; 7979 int numtags, depth_to_use; 7980 7981 ncr_setup_lcb(np, device); 7982 7983 /* 7984 ** Select queue depth from driver setup. 7985 ** Donnot use more than configured by user. 7986 ** Use at least 2. 7987 ** Donnot use more than our maximum. 7988 */ 7989 numtags = device_queue_depth(np->unit, device->id, device->lun); 7990 if (numtags > tp->usrtags) 7991 numtags = tp->usrtags; 7992 if (!device->tagged_supported) 7993 numtags = 1; 7994 depth_to_use = numtags; 7995 if (depth_to_use < 2) 7996 depth_to_use = 2; 7997 if (depth_to_use > MAX_TAGS) 7998 depth_to_use = MAX_TAGS; 7999 8000 scsi_change_queue_depth(device, depth_to_use); 8001 8002 /* 8003 ** Since the queue depth is not tunable under Linux, 8004 ** we need to know this value in order not to 8005 ** announce stupid things to user. 8006 ** 8007 ** XXX(hch): As of Linux 2.6 it certainly _is_ tunable.. 8008 ** In fact we just tuned it, or did I miss 8009 ** something important? :) 8010 */ 8011 if (lp) { 8012 lp->numtags = lp->maxtags = numtags; 8013 lp->scdev_depth = depth_to_use; 8014 } 8015 ncr_setup_tags (np, device); 8016 8017 #ifdef DEBUG_NCR53C8XX 8018 printk("ncr53c8xx_select_queue_depth: host=%d, id=%d, lun=%d, depth=%d\n", 8019 np->unit, device->id, device->lun, depth_to_use); 8020 #endif 8021 8022 if (spi_support_sync(device->sdev_target) && 8023 !spi_initial_dv(device->sdev_target)) 8024 spi_dv_device(device); 8025 return 0; 8026 } 8027 8028 static int ncr53c8xx_queue_command_lck (struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) 8029 { 8030 struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb; 8031 unsigned long flags; 8032 int sts; 8033 8034 #ifdef DEBUG_NCR53C8XX 8035 printk("ncr53c8xx_queue_command\n"); 8036 #endif 8037 8038 cmd->scsi_done = done; 8039 cmd->host_scribble = NULL; 8040 cmd->__data_mapped = 0; 8041 cmd->__data_mapping = 0; 8042 8043 spin_lock_irqsave(&np->smp_lock, flags); 8044 8045 if ((sts = ncr_queue_command(np, cmd)) != DID_OK) { 8046 cmd->result = ScsiResult(sts, 0); 8047 #ifdef DEBUG_NCR53C8XX 8048 printk("ncr53c8xx : command not queued - result=%d\n", sts); 8049 #endif 8050 } 8051 #ifdef DEBUG_NCR53C8XX 8052 else 8053 printk("ncr53c8xx : command successfully queued\n"); 8054 #endif 8055 8056 spin_unlock_irqrestore(&np->smp_lock, flags); 8057 8058 if (sts != DID_OK) { 8059 unmap_scsi_data(np, cmd); 8060 done(cmd); 8061 sts = 0; 8062 } 8063 8064 return sts; 8065 } 8066 8067 static DEF_SCSI_QCMD(ncr53c8xx_queue_command) 8068 8069 irqreturn_t ncr53c8xx_intr(int irq, void *dev_id) 8070 { 8071 unsigned long flags; 8072 struct Scsi_Host *shost = (struct Scsi_Host *)dev_id; 8073 struct host_data *host_data = (struct host_data *)shost->hostdata; 8074 struct ncb *np = host_data->ncb; 8075 struct scsi_cmnd *done_list; 8076 8077 #ifdef DEBUG_NCR53C8XX 8078 printk("ncr53c8xx : interrupt received\n"); 8079 #endif 8080 8081 if (DEBUG_FLAGS & DEBUG_TINY) printk ("["); 8082 8083 spin_lock_irqsave(&np->smp_lock, flags); 8084 ncr_exception(np); 8085 done_list = np->done_list; 8086 np->done_list = NULL; 8087 spin_unlock_irqrestore(&np->smp_lock, flags); 8088 8089 if (DEBUG_FLAGS & DEBUG_TINY) printk ("]\n"); 8090 8091 if (done_list) 8092 ncr_flush_done_cmds(done_list); 8093 return IRQ_HANDLED; 8094 } 8095 8096 static void ncr53c8xx_timeout(unsigned long npref) 8097 { 8098 struct ncb *np = (struct ncb *) npref; 8099 unsigned long flags; 8100 struct scsi_cmnd *done_list; 8101 8102 spin_lock_irqsave(&np->smp_lock, flags); 8103 ncr_timeout(np); 8104 done_list = np->done_list; 8105 np->done_list = NULL; 8106 spin_unlock_irqrestore(&np->smp_lock, flags); 8107 8108 if (done_list) 8109 ncr_flush_done_cmds(done_list); 8110 } 8111 8112 static int ncr53c8xx_bus_reset(struct scsi_cmnd *cmd) 8113 { 8114 struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb; 8115 int sts; 8116 unsigned long flags; 8117 struct scsi_cmnd *done_list; 8118 8119 /* 8120 * If the mid-level driver told us reset is synchronous, it seems 8121 * that we must call the done() callback for the involved command, 8122 * even if this command was not queued to the low-level driver, 8123 * before returning SUCCESS. 8124 */ 8125 8126 spin_lock_irqsave(&np->smp_lock, flags); 8127 sts = ncr_reset_bus(np, cmd, 1); 8128 8129 done_list = np->done_list; 8130 np->done_list = NULL; 8131 spin_unlock_irqrestore(&np->smp_lock, flags); 8132 8133 ncr_flush_done_cmds(done_list); 8134 8135 return sts; 8136 } 8137 8138 #if 0 /* unused and broken */ 8139 static int ncr53c8xx_abort(struct scsi_cmnd *cmd) 8140 { 8141 struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb; 8142 int sts; 8143 unsigned long flags; 8144 struct scsi_cmnd *done_list; 8145 8146 printk("ncr53c8xx_abort\n"); 8147 8148 NCR_LOCK_NCB(np, flags); 8149 8150 sts = ncr_abort_command(np, cmd); 8151 out: 8152 done_list = np->done_list; 8153 np->done_list = NULL; 8154 NCR_UNLOCK_NCB(np, flags); 8155 8156 ncr_flush_done_cmds(done_list); 8157 8158 return sts; 8159 } 8160 #endif 8161 8162 8163 /* 8164 ** Scsi command waiting list management. 8165 ** 8166 ** It may happen that we cannot insert a scsi command into the start queue, 8167 ** in the following circumstances. 8168 ** Too few preallocated ccb(s), 8169 ** maxtags < cmd_per_lun of the Linux host control block, 8170 ** etc... 8171 ** Such scsi commands are inserted into a waiting list. 8172 ** When a scsi command complete, we try to requeue the commands of the 8173 ** waiting list. 8174 */ 8175 8176 #define next_wcmd host_scribble 8177 8178 static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd) 8179 { 8180 struct scsi_cmnd *wcmd; 8181 8182 #ifdef DEBUG_WAITING_LIST 8183 printk("%s: cmd %lx inserted into waiting list\n", ncr_name(np), (u_long) cmd); 8184 #endif 8185 cmd->next_wcmd = NULL; 8186 if (!(wcmd = np->waiting_list)) np->waiting_list = cmd; 8187 else { 8188 while (wcmd->next_wcmd) 8189 wcmd = (struct scsi_cmnd *) wcmd->next_wcmd; 8190 wcmd->next_wcmd = (char *) cmd; 8191 } 8192 } 8193 8194 static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd) 8195 { 8196 struct scsi_cmnd **pcmd = &np->waiting_list; 8197 8198 while (*pcmd) { 8199 if (cmd == *pcmd) { 8200 if (to_remove) { 8201 *pcmd = (struct scsi_cmnd *) cmd->next_wcmd; 8202 cmd->next_wcmd = NULL; 8203 } 8204 #ifdef DEBUG_WAITING_LIST 8205 printk("%s: cmd %lx retrieved from waiting list\n", ncr_name(np), (u_long) cmd); 8206 #endif 8207 return cmd; 8208 } 8209 pcmd = (struct scsi_cmnd **) &(*pcmd)->next_wcmd; 8210 } 8211 return NULL; 8212 } 8213 8214 static void process_waiting_list(struct ncb *np, int sts) 8215 { 8216 struct scsi_cmnd *waiting_list, *wcmd; 8217 8218 waiting_list = np->waiting_list; 8219 np->waiting_list = NULL; 8220 8221 #ifdef DEBUG_WAITING_LIST 8222 if (waiting_list) printk("%s: waiting_list=%lx processing sts=%d\n", ncr_name(np), (u_long) waiting_list, sts); 8223 #endif 8224 while ((wcmd = waiting_list) != NULL) { 8225 waiting_list = (struct scsi_cmnd *) wcmd->next_wcmd; 8226 wcmd->next_wcmd = NULL; 8227 if (sts == DID_OK) { 8228 #ifdef DEBUG_WAITING_LIST 8229 printk("%s: cmd %lx trying to requeue\n", ncr_name(np), (u_long) wcmd); 8230 #endif 8231 sts = ncr_queue_command(np, wcmd); 8232 } 8233 if (sts != DID_OK) { 8234 #ifdef DEBUG_WAITING_LIST 8235 printk("%s: cmd %lx done forced sts=%d\n", ncr_name(np), (u_long) wcmd, sts); 8236 #endif 8237 wcmd->result = ScsiResult(sts, 0); 8238 ncr_queue_done_cmd(np, wcmd); 8239 } 8240 } 8241 } 8242 8243 #undef next_wcmd 8244 8245 static ssize_t show_ncr53c8xx_revision(struct device *dev, 8246 struct device_attribute *attr, char *buf) 8247 { 8248 struct Scsi_Host *host = class_to_shost(dev); 8249 struct host_data *host_data = (struct host_data *)host->hostdata; 8250 8251 return snprintf(buf, 20, "0x%x\n", host_data->ncb->revision_id); 8252 } 8253 8254 static struct device_attribute ncr53c8xx_revision_attr = { 8255 .attr = { .name = "revision", .mode = S_IRUGO, }, 8256 .show = show_ncr53c8xx_revision, 8257 }; 8258 8259 static struct device_attribute *ncr53c8xx_host_attrs[] = { 8260 &ncr53c8xx_revision_attr, 8261 NULL 8262 }; 8263 8264 /*========================================================== 8265 ** 8266 ** Boot command line. 8267 ** 8268 **========================================================== 8269 */ 8270 #ifdef MODULE 8271 char *ncr53c8xx; /* command line passed by insmod */ 8272 module_param(ncr53c8xx, charp, 0); 8273 #endif 8274 8275 #ifndef MODULE 8276 static int __init ncr53c8xx_setup(char *str) 8277 { 8278 return sym53c8xx__setup(str); 8279 } 8280 8281 __setup("ncr53c8xx=", ncr53c8xx_setup); 8282 #endif 8283 8284 8285 /* 8286 * Host attach and initialisations. 8287 * 8288 * Allocate host data and ncb structure. 8289 * Request IO region and remap MMIO region. 8290 * Do chip initialization. 8291 * If all is OK, install interrupt handling and 8292 * start the timer daemon. 8293 */ 8294 struct Scsi_Host * __init ncr_attach(struct scsi_host_template *tpnt, 8295 int unit, struct ncr_device *device) 8296 { 8297 struct host_data *host_data; 8298 struct ncb *np = NULL; 8299 struct Scsi_Host *instance = NULL; 8300 u_long flags = 0; 8301 int i; 8302 8303 if (!tpnt->name) 8304 tpnt->name = SCSI_NCR_DRIVER_NAME; 8305 if (!tpnt->shost_attrs) 8306 tpnt->shost_attrs = ncr53c8xx_host_attrs; 8307 8308 tpnt->queuecommand = ncr53c8xx_queue_command; 8309 tpnt->slave_configure = ncr53c8xx_slave_configure; 8310 tpnt->slave_alloc = ncr53c8xx_slave_alloc; 8311 tpnt->eh_bus_reset_handler = ncr53c8xx_bus_reset; 8312 tpnt->can_queue = SCSI_NCR_CAN_QUEUE; 8313 tpnt->this_id = 7; 8314 tpnt->sg_tablesize = SCSI_NCR_SG_TABLESIZE; 8315 tpnt->cmd_per_lun = SCSI_NCR_CMD_PER_LUN; 8316 tpnt->use_clustering = ENABLE_CLUSTERING; 8317 8318 if (device->differential) 8319 driver_setup.diff_support = device->differential; 8320 8321 printk(KERN_INFO "ncr53c720-%d: rev 0x%x irq %d\n", 8322 unit, device->chip.revision_id, device->slot.irq); 8323 8324 instance = scsi_host_alloc(tpnt, sizeof(*host_data)); 8325 if (!instance) 8326 goto attach_error; 8327 host_data = (struct host_data *) instance->hostdata; 8328 8329 np = __m_calloc_dma(device->dev, sizeof(struct ncb), "NCB"); 8330 if (!np) 8331 goto attach_error; 8332 spin_lock_init(&np->smp_lock); 8333 np->dev = device->dev; 8334 np->p_ncb = vtobus(np); 8335 host_data->ncb = np; 8336 8337 np->ccb = m_calloc_dma(sizeof(struct ccb), "CCB"); 8338 if (!np->ccb) 8339 goto attach_error; 8340 8341 /* Store input information in the host data structure. */ 8342 np->unit = unit; 8343 np->verbose = driver_setup.verbose; 8344 sprintf(np->inst_name, "ncr53c720-%d", np->unit); 8345 np->revision_id = device->chip.revision_id; 8346 np->features = device->chip.features; 8347 np->clock_divn = device->chip.nr_divisor; 8348 np->maxoffs = device->chip.offset_max; 8349 np->maxburst = device->chip.burst_max; 8350 np->myaddr = device->host_id; 8351 8352 /* Allocate SCRIPTS areas. */ 8353 np->script0 = m_calloc_dma(sizeof(struct script), "SCRIPT"); 8354 if (!np->script0) 8355 goto attach_error; 8356 np->scripth0 = m_calloc_dma(sizeof(struct scripth), "SCRIPTH"); 8357 if (!np->scripth0) 8358 goto attach_error; 8359 8360 init_timer(&np->timer); 8361 np->timer.data = (unsigned long) np; 8362 np->timer.function = ncr53c8xx_timeout; 8363 8364 /* Try to map the controller chip to virtual and physical memory. */ 8365 8366 np->paddr = device->slot.base; 8367 np->paddr2 = (np->features & FE_RAM) ? device->slot.base_2 : 0; 8368 8369 if (device->slot.base_v) 8370 np->vaddr = device->slot.base_v; 8371 else 8372 np->vaddr = ioremap(device->slot.base_c, 128); 8373 8374 if (!np->vaddr) { 8375 printk(KERN_ERR 8376 "%s: can't map memory mapped IO region\n",ncr_name(np)); 8377 goto attach_error; 8378 } else { 8379 if (bootverbose > 1) 8380 printk(KERN_INFO 8381 "%s: using memory mapped IO at virtual address 0x%lx\n", ncr_name(np), (u_long) np->vaddr); 8382 } 8383 8384 /* Make the controller's registers available. Now the INB INW INL 8385 * OUTB OUTW OUTL macros can be used safely. 8386 */ 8387 8388 np->reg = (struct ncr_reg __iomem *)np->vaddr; 8389 8390 /* Do chip dependent initialization. */ 8391 ncr_prepare_setting(np); 8392 8393 if (np->paddr2 && sizeof(struct script) > 4096) { 8394 np->paddr2 = 0; 8395 printk(KERN_WARNING "%s: script too large, NOT using on chip RAM.\n", 8396 ncr_name(np)); 8397 } 8398 8399 instance->max_channel = 0; 8400 instance->this_id = np->myaddr; 8401 instance->max_id = np->maxwide ? 16 : 8; 8402 instance->max_lun = SCSI_NCR_MAX_LUN; 8403 instance->base = (unsigned long) np->reg; 8404 instance->irq = device->slot.irq; 8405 instance->unique_id = device->slot.base; 8406 instance->dma_channel = 0; 8407 instance->cmd_per_lun = MAX_TAGS; 8408 instance->can_queue = (MAX_START-4); 8409 /* This can happen if you forget to call ncr53c8xx_init from 8410 * your module_init */ 8411 BUG_ON(!ncr53c8xx_transport_template); 8412 instance->transportt = ncr53c8xx_transport_template; 8413 8414 /* Patch script to physical addresses */ 8415 ncr_script_fill(&script0, &scripth0); 8416 8417 np->scripth = np->scripth0; 8418 np->p_scripth = vtobus(np->scripth); 8419 np->p_script = (np->paddr2) ? np->paddr2 : vtobus(np->script0); 8420 8421 ncr_script_copy_and_bind(np, (ncrcmd *) &script0, 8422 (ncrcmd *) np->script0, sizeof(struct script)); 8423 ncr_script_copy_and_bind(np, (ncrcmd *) &scripth0, 8424 (ncrcmd *) np->scripth0, sizeof(struct scripth)); 8425 np->ccb->p_ccb = vtobus (np->ccb); 8426 8427 /* Patch the script for LED support. */ 8428 8429 if (np->features & FE_LED0) { 8430 np->script0->idle[0] = 8431 cpu_to_scr(SCR_REG_REG(gpreg, SCR_OR, 0x01)); 8432 np->script0->reselected[0] = 8433 cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe)); 8434 np->script0->start[0] = 8435 cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe)); 8436 } 8437 8438 /* 8439 * Look for the target control block of this nexus. 8440 * For i = 0 to 3 8441 * JUMP ^ IFTRUE (MASK (i, 3)), @(next_lcb) 8442 */ 8443 for (i = 0 ; i < 4 ; i++) { 8444 np->jump_tcb[i].l_cmd = 8445 cpu_to_scr((SCR_JUMP ^ IFTRUE (MASK (i, 3)))); 8446 np->jump_tcb[i].l_paddr = 8447 cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_target)); 8448 } 8449 8450 ncr_chip_reset(np, 100); 8451 8452 /* Now check the cache handling of the chipset. */ 8453 8454 if (ncr_snooptest(np)) { 8455 printk(KERN_ERR "CACHE INCORRECTLY CONFIGURED.\n"); 8456 goto attach_error; 8457 } 8458 8459 /* Install the interrupt handler. */ 8460 np->irq = device->slot.irq; 8461 8462 /* Initialize the fixed part of the default ccb. */ 8463 ncr_init_ccb(np, np->ccb); 8464 8465 /* 8466 * After SCSI devices have been opened, we cannot reset the bus 8467 * safely, so we do it here. Interrupt handler does the real work. 8468 * Process the reset exception if interrupts are not enabled yet. 8469 * Then enable disconnects. 8470 */ 8471 spin_lock_irqsave(&np->smp_lock, flags); 8472 if (ncr_reset_scsi_bus(np, 0, driver_setup.settle_delay) != 0) { 8473 printk(KERN_ERR "%s: FATAL ERROR: CHECK SCSI BUS - CABLES, TERMINATION, DEVICE POWER etc.!\n", ncr_name(np)); 8474 8475 spin_unlock_irqrestore(&np->smp_lock, flags); 8476 goto attach_error; 8477 } 8478 ncr_exception(np); 8479 8480 np->disc = 1; 8481 8482 /* 8483 * The middle-level SCSI driver does not wait for devices to settle. 8484 * Wait synchronously if more than 2 seconds. 8485 */ 8486 if (driver_setup.settle_delay > 2) { 8487 printk(KERN_INFO "%s: waiting %d seconds for scsi devices to settle...\n", 8488 ncr_name(np), driver_setup.settle_delay); 8489 mdelay(1000 * driver_setup.settle_delay); 8490 } 8491 8492 /* start the timeout daemon */ 8493 np->lasttime=0; 8494 ncr_timeout (np); 8495 8496 /* use SIMPLE TAG messages by default */ 8497 #ifdef SCSI_NCR_ALWAYS_SIMPLE_TAG 8498 np->order = SIMPLE_QUEUE_TAG; 8499 #endif 8500 8501 spin_unlock_irqrestore(&np->smp_lock, flags); 8502 8503 return instance; 8504 8505 attach_error: 8506 if (!instance) 8507 return NULL; 8508 printk(KERN_INFO "%s: detaching...\n", ncr_name(np)); 8509 if (!np) 8510 goto unregister; 8511 if (np->scripth0) 8512 m_free_dma(np->scripth0, sizeof(struct scripth), "SCRIPTH"); 8513 if (np->script0) 8514 m_free_dma(np->script0, sizeof(struct script), "SCRIPT"); 8515 if (np->ccb) 8516 m_free_dma(np->ccb, sizeof(struct ccb), "CCB"); 8517 m_free_dma(np, sizeof(struct ncb), "NCB"); 8518 host_data->ncb = NULL; 8519 8520 unregister: 8521 scsi_host_put(instance); 8522 8523 return NULL; 8524 } 8525 8526 8527 void ncr53c8xx_release(struct Scsi_Host *host) 8528 { 8529 struct host_data *host_data = shost_priv(host); 8530 #ifdef DEBUG_NCR53C8XX 8531 printk("ncr53c8xx: release\n"); 8532 #endif 8533 if (host_data->ncb) 8534 ncr_detach(host_data->ncb); 8535 scsi_host_put(host); 8536 } 8537 8538 static void ncr53c8xx_set_period(struct scsi_target *starget, int period) 8539 { 8540 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); 8541 struct ncb *np = ((struct host_data *)shost->hostdata)->ncb; 8542 struct tcb *tp = &np->target[starget->id]; 8543 8544 if (period > np->maxsync) 8545 period = np->maxsync; 8546 else if (period < np->minsync) 8547 period = np->minsync; 8548 8549 tp->usrsync = period; 8550 8551 ncr_negotiate(np, tp); 8552 } 8553 8554 static void ncr53c8xx_set_offset(struct scsi_target *starget, int offset) 8555 { 8556 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); 8557 struct ncb *np = ((struct host_data *)shost->hostdata)->ncb; 8558 struct tcb *tp = &np->target[starget->id]; 8559 8560 if (offset > np->maxoffs) 8561 offset = np->maxoffs; 8562 else if (offset < 0) 8563 offset = 0; 8564 8565 tp->maxoffs = offset; 8566 8567 ncr_negotiate(np, tp); 8568 } 8569 8570 static void ncr53c8xx_set_width(struct scsi_target *starget, int width) 8571 { 8572 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); 8573 struct ncb *np = ((struct host_data *)shost->hostdata)->ncb; 8574 struct tcb *tp = &np->target[starget->id]; 8575 8576 if (width > np->maxwide) 8577 width = np->maxwide; 8578 else if (width < 0) 8579 width = 0; 8580 8581 tp->usrwide = width; 8582 8583 ncr_negotiate(np, tp); 8584 } 8585 8586 static void ncr53c8xx_get_signalling(struct Scsi_Host *shost) 8587 { 8588 struct ncb *np = ((struct host_data *)shost->hostdata)->ncb; 8589 enum spi_signal_type type; 8590 8591 switch (np->scsi_mode) { 8592 case SMODE_SE: 8593 type = SPI_SIGNAL_SE; 8594 break; 8595 case SMODE_HVD: 8596 type = SPI_SIGNAL_HVD; 8597 break; 8598 default: 8599 type = SPI_SIGNAL_UNKNOWN; 8600 break; 8601 } 8602 spi_signalling(shost) = type; 8603 } 8604 8605 static struct spi_function_template ncr53c8xx_transport_functions = { 8606 .set_period = ncr53c8xx_set_period, 8607 .show_period = 1, 8608 .set_offset = ncr53c8xx_set_offset, 8609 .show_offset = 1, 8610 .set_width = ncr53c8xx_set_width, 8611 .show_width = 1, 8612 .get_signalling = ncr53c8xx_get_signalling, 8613 }; 8614 8615 int __init ncr53c8xx_init(void) 8616 { 8617 ncr53c8xx_transport_template = spi_attach_transport(&ncr53c8xx_transport_functions); 8618 if (!ncr53c8xx_transport_template) 8619 return -ENODEV; 8620 return 0; 8621 } 8622 8623 void ncr53c8xx_exit(void) 8624 { 8625 spi_release_transport(ncr53c8xx_transport_template); 8626 } 8627