1 /* 2 * Scsi Host Layer for MPT (Message Passing Technology) based controllers 3 * 4 * Copyright (C) 2012-2014 LSI Corporation 5 * Copyright (C) 2013-2015 Avago Technologies 6 * (mailto: MPT-FusionLinux.pdl@avagotech.com) 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License 10 * as published by the Free Software Foundation; either version 2 11 * of the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * NO WARRANTY 19 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 20 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 21 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 22 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 23 * solely responsible for determining the appropriateness of using and 24 * distributing the Program and assumes all risks associated with its 25 * exercise of rights under this Agreement, including but not limited to 26 * the risks and costs of program errors, damage to or loss of data, 27 * programs or equipment, and unavailability or interruption of operations. 28 29 * DISCLAIMER OF LIABILITY 30 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 31 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 32 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 33 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 34 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 35 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 36 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 37 38 * You should have received a copy of the GNU General Public License 39 * along with this program. 40 */ 41 #include <linux/kernel.h> 42 #include <linux/module.h> 43 #include <linux/errno.h> 44 #include <linux/types.h> 45 #include <asm/unaligned.h> 46 47 #include "mpt3sas_base.h" 48 49 /** 50 * _warpdrive_disable_ddio - Disable direct I/O for all the volumes 51 * @ioc: per adapter object 52 */ 53 static void 54 _warpdrive_disable_ddio(struct MPT3SAS_ADAPTER *ioc) 55 { 56 Mpi2RaidVolPage1_t vol_pg1; 57 Mpi2ConfigReply_t mpi_reply; 58 struct _raid_device *raid_device; 59 u16 handle; 60 u16 ioc_status; 61 unsigned long flags; 62 63 handle = 0xFFFF; 64 while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply, 65 &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { 66 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & 67 MPI2_IOCSTATUS_MASK; 68 if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) 69 break; 70 handle = le16_to_cpu(vol_pg1.DevHandle); 71 spin_lock_irqsave(&ioc->raid_device_lock, flags); 72 raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle); 73 if (raid_device) 74 raid_device->direct_io_enabled = 0; 75 spin_unlock_irqrestore(&ioc->raid_device_lock, flags); 76 } 77 return; 78 } 79 80 81 /** 82 * mpt3sas_get_num_volumes - Get number of volumes in the ioc 83 * @ioc: per adapter object 84 */ 85 u8 86 mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc) 87 { 88 Mpi2RaidVolPage1_t vol_pg1; 89 Mpi2ConfigReply_t mpi_reply; 90 u16 handle; 91 u8 vol_cnt = 0; 92 u16 ioc_status; 93 94 handle = 0xFFFF; 95 while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply, 96 &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { 97 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & 98 MPI2_IOCSTATUS_MASK; 99 if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) 100 break; 101 vol_cnt++; 102 handle = le16_to_cpu(vol_pg1.DevHandle); 103 } 104 return vol_cnt; 105 } 106 107 108 /** 109 * mpt3sas_init_warpdrive_properties - Set properties for warpdrive direct I/O. 110 * @ioc: per adapter object 111 * @raid_device: the raid_device object 112 */ 113 void 114 mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc, 115 struct _raid_device *raid_device) 116 { 117 Mpi2RaidVolPage0_t *vol_pg0; 118 Mpi2RaidPhysDiskPage0_t pd_pg0; 119 Mpi2ConfigReply_t mpi_reply; 120 u16 sz; 121 u8 num_pds, count; 122 unsigned long stripe_sz, block_sz; 123 u8 stripe_exp, block_exp; 124 u64 dev_max_lba; 125 126 if (!ioc->is_warpdrive) 127 return; 128 129 if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) { 130 ioc_info(ioc, "WarpDrive : Direct IO is disabled globally as drives are exposed\n"); 131 return; 132 } 133 if (mpt3sas_get_num_volumes(ioc) > 1) { 134 _warpdrive_disable_ddio(ioc); 135 ioc_info(ioc, "WarpDrive : Direct IO is disabled globally as number of drives > 1\n"); 136 return; 137 } 138 if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle, 139 &num_pds)) || !num_pds) { 140 ioc_info(ioc, "WarpDrive : Direct IO is disabled Failure in computing number of drives\n"); 141 return; 142 } 143 144 sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * 145 sizeof(Mpi2RaidVol0PhysDisk_t)); 146 vol_pg0 = kzalloc(sz, GFP_KERNEL); 147 if (!vol_pg0) { 148 ioc_info(ioc, "WarpDrive : Direct IO is disabled Memory allocation failure for RVPG0\n"); 149 return; 150 } 151 152 if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, 153 MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { 154 ioc_info(ioc, "WarpDrive : Direct IO is disabled Failure in retrieving RVPG0\n"); 155 kfree(vol_pg0); 156 return; 157 } 158 159 /* 160 * WARPDRIVE:If number of physical disks in a volume exceeds the max pds 161 * assumed for WARPDRIVE, disable direct I/O 162 */ 163 if (num_pds > MPT_MAX_WARPDRIVE_PDS) { 164 ioc_warn(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x): num_mem=%d, max_mem_allowed=%d\n", 165 raid_device->handle, num_pds, MPT_MAX_WARPDRIVE_PDS); 166 kfree(vol_pg0); 167 return; 168 } 169 for (count = 0; count < num_pds; count++) { 170 if (mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply, 171 &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM, 172 vol_pg0->PhysDisk[count].PhysDiskNum) || 173 le16_to_cpu(pd_pg0.DevHandle) == 174 MPT3SAS_INVALID_DEVICE_HANDLE) { 175 ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) member handle retrieval failed for member number=%d\n", 176 raid_device->handle, 177 vol_pg0->PhysDisk[count].PhysDiskNum); 178 goto out_error; 179 } 180 /* Disable direct I/O if member drive lba exceeds 4 bytes */ 181 dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA); 182 if (dev_max_lba >> 32) { 183 ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) member handle (0x%04x) unsupported max lba 0x%016llx\n", 184 raid_device->handle, 185 le16_to_cpu(pd_pg0.DevHandle), 186 (u64)dev_max_lba); 187 goto out_error; 188 } 189 190 raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle); 191 } 192 193 /* 194 * Assumption for WD: Direct I/O is not supported if the volume is 195 * not RAID0 196 */ 197 if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) { 198 ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x): type=%d, s_sz=%uK, blk_size=%u\n", 199 raid_device->handle, raid_device->volume_type, 200 (le32_to_cpu(vol_pg0->StripeSize) * 201 le16_to_cpu(vol_pg0->BlockSize)) / 1024, 202 le16_to_cpu(vol_pg0->BlockSize)); 203 goto out_error; 204 } 205 206 stripe_sz = le32_to_cpu(vol_pg0->StripeSize); 207 stripe_exp = find_first_bit(&stripe_sz, 32); 208 if (stripe_exp == 32) { 209 ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) invalid stripe sz %uK\n", 210 raid_device->handle, 211 (le32_to_cpu(vol_pg0->StripeSize) * 212 le16_to_cpu(vol_pg0->BlockSize)) / 1024); 213 goto out_error; 214 } 215 raid_device->stripe_exponent = stripe_exp; 216 block_sz = le16_to_cpu(vol_pg0->BlockSize); 217 block_exp = find_first_bit(&block_sz, 16); 218 if (block_exp == 16) { 219 ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) invalid block sz %u\n", 220 raid_device->handle, le16_to_cpu(vol_pg0->BlockSize)); 221 goto out_error; 222 } 223 raid_device->block_exponent = block_exp; 224 raid_device->direct_io_enabled = 1; 225 226 ioc_info(ioc, "WarpDrive : Direct IO is Enabled for the drive with handle(0x%04x)\n", 227 raid_device->handle); 228 /* 229 * WARPDRIVE: Though the following fields are not used for direct IO, 230 * stored for future purpose: 231 */ 232 raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA); 233 raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize); 234 raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize); 235 236 237 kfree(vol_pg0); 238 return; 239 240 out_error: 241 raid_device->direct_io_enabled = 0; 242 for (count = 0; count < num_pds; count++) 243 raid_device->pd_handle[count] = 0; 244 kfree(vol_pg0); 245 return; 246 } 247 248 /** 249 * mpt3sas_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O 250 * @ioc: per adapter object 251 * @scmd: pointer to scsi command object 252 * @raid_device: pointer to raid device data structure 253 * @mpi_request: pointer to the SCSI_IO reqest message frame 254 */ 255 void 256 mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, 257 struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request) 258 { 259 sector_t v_lba, p_lba, stripe_off, column, io_size; 260 u32 stripe_sz, stripe_exp; 261 u8 num_pds, cmd = scmd->cmnd[0]; 262 struct scsiio_tracker *st = scsi_cmd_priv(scmd); 263 264 if (cmd != READ_10 && cmd != WRITE_10 && 265 cmd != READ_16 && cmd != WRITE_16) 266 return; 267 268 if (cmd == READ_10 || cmd == WRITE_10) 269 v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]); 270 else 271 v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]); 272 273 io_size = scsi_bufflen(scmd) >> raid_device->block_exponent; 274 275 if (v_lba + io_size - 1 > raid_device->max_lba) 276 return; 277 278 stripe_sz = raid_device->stripe_sz; 279 stripe_exp = raid_device->stripe_exponent; 280 stripe_off = v_lba & (stripe_sz - 1); 281 282 /* Return unless IO falls within a stripe */ 283 if (stripe_off + io_size > stripe_sz) 284 return; 285 286 num_pds = raid_device->num_pds; 287 p_lba = v_lba >> stripe_exp; 288 column = sector_div(p_lba, num_pds); 289 p_lba = (p_lba << stripe_exp) + stripe_off; 290 mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]); 291 292 if (cmd == READ_10 || cmd == WRITE_10) 293 put_unaligned_be32(lower_32_bits(p_lba), 294 &mpi_request->CDB.CDB32[2]); 295 else 296 put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]); 297 298 st->direct_io = 1; 299 } 300