1 /* 2 * SAS Transport Layer for MPT (Message Passing Technology) based controllers 3 * 4 * This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c 5 * Copyright (C) 2012-2013 LSI Corporation 6 * (mailto:DL-MPTFusionLinux@lsi.com) 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License 10 * as published by the Free Software Foundation; either version 2 11 * of the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * NO WARRANTY 19 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 20 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 21 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 22 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 23 * solely responsible for determining the appropriateness of using and 24 * distributing the Program and assumes all risks associated with its 25 * exercise of rights under this Agreement, including but not limited to 26 * the risks and costs of program errors, damage to or loss of data, 27 * programs or equipment, and unavailability or interruption of operations. 28 29 * DISCLAIMER OF LIABILITY 30 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 31 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 32 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 33 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 34 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 35 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 36 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 37 38 * You should have received a copy of the GNU General Public License 39 * along with this program; if not, write to the Free Software 40 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 41 * USA. 42 */ 43 44 #include <linux/module.h> 45 #include <linux/kernel.h> 46 #include <linux/init.h> 47 #include <linux/errno.h> 48 #include <linux/sched.h> 49 #include <linux/workqueue.h> 50 #include <linux/delay.h> 51 #include <linux/pci.h> 52 53 #include <scsi/scsi.h> 54 #include <scsi/scsi_cmnd.h> 55 #include <scsi/scsi_device.h> 56 #include <scsi/scsi_host.h> 57 #include <scsi/scsi_transport_sas.h> 58 #include <scsi/scsi_dbg.h> 59 60 #include "mpt3sas_base.h" 61 62 /** 63 * _transport_sas_node_find_by_sas_address - sas node search 64 * @ioc: per adapter object 65 * @sas_address: sas address of expander or sas host 66 * Context: Calling function should acquire ioc->sas_node_lock. 67 * 68 * Search for either hba phys or expander device based on handle, then returns 69 * the sas_node object. 70 */ 71 static struct _sas_node * 72 _transport_sas_node_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc, 73 u64 sas_address) 74 { 75 if (ioc->sas_hba.sas_address == sas_address) 76 return &ioc->sas_hba; 77 else 78 return mpt3sas_scsih_expander_find_by_sas_address(ioc, 79 sas_address); 80 } 81 82 /** 83 * _transport_convert_phy_link_rate - 84 * @link_rate: link rate returned from mpt firmware 85 * 86 * Convert link_rate from mpi fusion into sas_transport form. 87 */ 88 static enum sas_linkrate 89 _transport_convert_phy_link_rate(u8 link_rate) 90 { 91 enum sas_linkrate rc; 92 93 switch (link_rate) { 94 case MPI2_SAS_NEG_LINK_RATE_1_5: 95 rc = SAS_LINK_RATE_1_5_GBPS; 96 break; 97 case MPI2_SAS_NEG_LINK_RATE_3_0: 98 rc = SAS_LINK_RATE_3_0_GBPS; 99 break; 100 case MPI2_SAS_NEG_LINK_RATE_6_0: 101 rc = SAS_LINK_RATE_6_0_GBPS; 102 break; 103 case MPI25_SAS_NEG_LINK_RATE_12_0: 104 rc = SAS_LINK_RATE_12_0_GBPS; 105 break; 106 case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED: 107 rc = SAS_PHY_DISABLED; 108 break; 109 case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED: 110 rc = SAS_LINK_RATE_FAILED; 111 break; 112 case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR: 113 rc = SAS_SATA_PORT_SELECTOR; 114 break; 115 case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS: 116 rc = SAS_PHY_RESET_IN_PROGRESS; 117 break; 118 119 default: 120 case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE: 121 case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE: 122 rc = SAS_LINK_RATE_UNKNOWN; 123 break; 124 } 125 return rc; 126 } 127 128 /** 129 * _transport_set_identify - set identify for phys and end devices 130 * @ioc: per adapter object 131 * @handle: device handle 132 * @identify: sas identify info 133 * 134 * Populates sas identify info. 135 * 136 * Returns 0 for success, non-zero for failure. 137 */ 138 static int 139 _transport_set_identify(struct MPT3SAS_ADAPTER *ioc, u16 handle, 140 struct sas_identify *identify) 141 { 142 Mpi2SasDevicePage0_t sas_device_pg0; 143 Mpi2ConfigReply_t mpi_reply; 144 u32 device_info; 145 u32 ioc_status; 146 147 if (ioc->shost_recovery || ioc->pci_error_recovery) { 148 pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", 149 __func__, ioc->name); 150 return -EFAULT; 151 } 152 153 if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, 154 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { 155 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 156 ioc->name, __FILE__, __LINE__, __func__); 157 return -ENXIO; 158 } 159 160 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & 161 MPI2_IOCSTATUS_MASK; 162 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { 163 pr_err(MPT3SAS_FMT 164 "handle(0x%04x), ioc_status(0x%04x)\nfailure at %s:%d/%s()!\n", 165 ioc->name, handle, ioc_status, 166 __FILE__, __LINE__, __func__); 167 return -EIO; 168 } 169 170 memset(identify, 0, sizeof(struct sas_identify)); 171 device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); 172 173 /* sas_address */ 174 identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress); 175 176 /* phy number of the parent device this device is linked to */ 177 identify->phy_identifier = sas_device_pg0.PhyNum; 178 179 /* device_type */ 180 switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) { 181 case MPI2_SAS_DEVICE_INFO_NO_DEVICE: 182 identify->device_type = SAS_PHY_UNUSED; 183 break; 184 case MPI2_SAS_DEVICE_INFO_END_DEVICE: 185 identify->device_type = SAS_END_DEVICE; 186 break; 187 case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER: 188 identify->device_type = SAS_EDGE_EXPANDER_DEVICE; 189 break; 190 case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER: 191 identify->device_type = SAS_FANOUT_EXPANDER_DEVICE; 192 break; 193 } 194 195 /* initiator_port_protocols */ 196 if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR) 197 identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; 198 if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR) 199 identify->initiator_port_protocols |= SAS_PROTOCOL_STP; 200 if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR) 201 identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; 202 if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST) 203 identify->initiator_port_protocols |= SAS_PROTOCOL_SATA; 204 205 /* target_port_protocols */ 206 if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) 207 identify->target_port_protocols |= SAS_PROTOCOL_SSP; 208 if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) 209 identify->target_port_protocols |= SAS_PROTOCOL_STP; 210 if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) 211 identify->target_port_protocols |= SAS_PROTOCOL_SMP; 212 if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) 213 identify->target_port_protocols |= SAS_PROTOCOL_SATA; 214 215 return 0; 216 } 217 218 /** 219 * mpt3sas_transport_done - internal transport layer callback handler. 220 * @ioc: per adapter object 221 * @smid: system request message index 222 * @msix_index: MSIX table index supplied by the OS 223 * @reply: reply message frame(lower 32bit addr) 224 * 225 * Callback handler when sending internal generated transport cmds. 226 * The callback index passed is `ioc->transport_cb_idx` 227 * 228 * Return 1 meaning mf should be freed from _base_interrupt 229 * 0 means the mf is freed from this function. 230 */ 231 u8 232 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 233 u32 reply) 234 { 235 MPI2DefaultReply_t *mpi_reply; 236 237 mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); 238 if (ioc->transport_cmds.status == MPT3_CMD_NOT_USED) 239 return 1; 240 if (ioc->transport_cmds.smid != smid) 241 return 1; 242 ioc->transport_cmds.status |= MPT3_CMD_COMPLETE; 243 if (mpi_reply) { 244 memcpy(ioc->transport_cmds.reply, mpi_reply, 245 mpi_reply->MsgLength*4); 246 ioc->transport_cmds.status |= MPT3_CMD_REPLY_VALID; 247 } 248 ioc->transport_cmds.status &= ~MPT3_CMD_PENDING; 249 complete(&ioc->transport_cmds.done); 250 return 1; 251 } 252 253 /* report manufacture request structure */ 254 struct rep_manu_request { 255 u8 smp_frame_type; 256 u8 function; 257 u8 reserved; 258 u8 request_length; 259 }; 260 261 /* report manufacture reply structure */ 262 struct rep_manu_reply { 263 u8 smp_frame_type; /* 0x41 */ 264 u8 function; /* 0x01 */ 265 u8 function_result; 266 u8 response_length; 267 u16 expander_change_count; 268 u8 reserved0[2]; 269 u8 sas_format; 270 u8 reserved2[3]; 271 u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN]; 272 u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN]; 273 u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN]; 274 u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN]; 275 u16 component_id; 276 u8 component_revision_id; 277 u8 reserved3; 278 u8 vendor_specific[8]; 279 }; 280 281 /** 282 * transport_expander_report_manufacture - obtain SMP report_manufacture 283 * @ioc: per adapter object 284 * @sas_address: expander sas address 285 * @edev: the sas_expander_device object 286 * 287 * Fills in the sas_expander_device object when SMP port is created. 288 * 289 * Returns 0 for success, non-zero for failure. 290 */ 291 static int 292 _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc, 293 u64 sas_address, struct sas_expander_device *edev) 294 { 295 Mpi2SmpPassthroughRequest_t *mpi_request; 296 Mpi2SmpPassthroughReply_t *mpi_reply; 297 struct rep_manu_reply *manufacture_reply; 298 struct rep_manu_request *manufacture_request; 299 int rc; 300 u16 smid; 301 u32 ioc_state; 302 unsigned long timeleft; 303 void *psge; 304 u8 issue_reset = 0; 305 void *data_out = NULL; 306 dma_addr_t data_out_dma; 307 dma_addr_t data_in_dma; 308 size_t data_in_sz; 309 size_t data_out_sz; 310 u16 wait_state_count; 311 312 if (ioc->shost_recovery || ioc->pci_error_recovery) { 313 pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", 314 __func__, ioc->name); 315 return -EFAULT; 316 } 317 318 mutex_lock(&ioc->transport_cmds.mutex); 319 320 if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { 321 pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", 322 ioc->name, __func__); 323 rc = -EAGAIN; 324 goto out; 325 } 326 ioc->transport_cmds.status = MPT3_CMD_PENDING; 327 328 wait_state_count = 0; 329 ioc_state = mpt3sas_base_get_iocstate(ioc, 1); 330 while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { 331 if (wait_state_count++ == 10) { 332 pr_err(MPT3SAS_FMT 333 "%s: failed due to ioc not operational\n", 334 ioc->name, __func__); 335 rc = -EFAULT; 336 goto out; 337 } 338 ssleep(1); 339 ioc_state = mpt3sas_base_get_iocstate(ioc, 1); 340 pr_info(MPT3SAS_FMT 341 "%s: waiting for operational state(count=%d)\n", 342 ioc->name, __func__, wait_state_count); 343 } 344 if (wait_state_count) 345 pr_info(MPT3SAS_FMT "%s: ioc is operational\n", 346 ioc->name, __func__); 347 348 smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); 349 if (!smid) { 350 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", 351 ioc->name, __func__); 352 rc = -EAGAIN; 353 goto out; 354 } 355 356 rc = 0; 357 mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); 358 ioc->transport_cmds.smid = smid; 359 360 data_out_sz = sizeof(struct rep_manu_request); 361 data_in_sz = sizeof(struct rep_manu_reply); 362 data_out = pci_alloc_consistent(ioc->pdev, data_out_sz + data_in_sz, 363 &data_out_dma); 364 365 if (!data_out) { 366 pr_err("failure at %s:%d/%s()!\n", __FILE__, 367 __LINE__, __func__); 368 rc = -ENOMEM; 369 mpt3sas_base_free_smid(ioc, smid); 370 goto out; 371 } 372 373 data_in_dma = data_out_dma + sizeof(struct rep_manu_request); 374 375 manufacture_request = data_out; 376 manufacture_request->smp_frame_type = 0x40; 377 manufacture_request->function = 1; 378 manufacture_request->reserved = 0; 379 manufacture_request->request_length = 0; 380 381 memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); 382 mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; 383 mpi_request->PhysicalPort = 0xFF; 384 mpi_request->SASAddress = cpu_to_le64(sas_address); 385 mpi_request->RequestDataLength = cpu_to_le16(data_out_sz); 386 psge = &mpi_request->SGL; 387 388 ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma, 389 data_in_sz); 390 391 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 392 "report_manufacture - send to sas_addr(0x%016llx)\n", 393 ioc->name, (unsigned long long)sas_address)); 394 init_completion(&ioc->transport_cmds.done); 395 mpt3sas_base_put_smid_default(ioc, smid); 396 timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, 397 10*HZ); 398 399 if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { 400 pr_err(MPT3SAS_FMT "%s: timeout\n", 401 ioc->name, __func__); 402 _debug_dump_mf(mpi_request, 403 sizeof(Mpi2SmpPassthroughRequest_t)/4); 404 if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) 405 issue_reset = 1; 406 goto issue_host_reset; 407 } 408 409 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 410 "report_manufacture - complete\n", ioc->name)); 411 412 if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { 413 u8 *tmp; 414 415 mpi_reply = ioc->transport_cmds.reply; 416 417 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 418 "report_manufacture - reply data transfer size(%d)\n", 419 ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); 420 421 if (le16_to_cpu(mpi_reply->ResponseDataLength) != 422 sizeof(struct rep_manu_reply)) 423 goto out; 424 425 manufacture_reply = data_out + sizeof(struct rep_manu_request); 426 strncpy(edev->vendor_id, manufacture_reply->vendor_id, 427 SAS_EXPANDER_VENDOR_ID_LEN); 428 strncpy(edev->product_id, manufacture_reply->product_id, 429 SAS_EXPANDER_PRODUCT_ID_LEN); 430 strncpy(edev->product_rev, manufacture_reply->product_rev, 431 SAS_EXPANDER_PRODUCT_REV_LEN); 432 edev->level = manufacture_reply->sas_format & 1; 433 if (edev->level) { 434 strncpy(edev->component_vendor_id, 435 manufacture_reply->component_vendor_id, 436 SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); 437 tmp = (u8 *)&manufacture_reply->component_id; 438 edev->component_id = tmp[0] << 8 | tmp[1]; 439 edev->component_revision_id = 440 manufacture_reply->component_revision_id; 441 } 442 } else 443 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 444 "report_manufacture - no reply\n", ioc->name)); 445 446 issue_host_reset: 447 if (issue_reset) 448 mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, 449 FORCE_BIG_HAMMER); 450 out: 451 ioc->transport_cmds.status = MPT3_CMD_NOT_USED; 452 if (data_out) 453 pci_free_consistent(ioc->pdev, data_out_sz + data_in_sz, 454 data_out, data_out_dma); 455 456 mutex_unlock(&ioc->transport_cmds.mutex); 457 return rc; 458 } 459 460 461 /** 462 * _transport_delete_port - helper function to removing a port 463 * @ioc: per adapter object 464 * @mpt3sas_port: mpt3sas per port object 465 * 466 * Returns nothing. 467 */ 468 static void 469 _transport_delete_port(struct MPT3SAS_ADAPTER *ioc, 470 struct _sas_port *mpt3sas_port) 471 { 472 u64 sas_address = mpt3sas_port->remote_identify.sas_address; 473 enum sas_device_type device_type = 474 mpt3sas_port->remote_identify.device_type; 475 476 dev_printk(KERN_INFO, &mpt3sas_port->port->dev, 477 "remove: sas_addr(0x%016llx)\n", 478 (unsigned long long) sas_address); 479 480 ioc->logging_level |= MPT_DEBUG_TRANSPORT; 481 if (device_type == SAS_END_DEVICE) 482 mpt3sas_device_remove_by_sas_address(ioc, sas_address); 483 else if (device_type == SAS_EDGE_EXPANDER_DEVICE || 484 device_type == SAS_FANOUT_EXPANDER_DEVICE) 485 mpt3sas_expander_remove(ioc, sas_address); 486 ioc->logging_level &= ~MPT_DEBUG_TRANSPORT; 487 } 488 489 /** 490 * _transport_delete_phy - helper function to removing single phy from port 491 * @ioc: per adapter object 492 * @mpt3sas_port: mpt3sas per port object 493 * @mpt3sas_phy: mpt3sas per phy object 494 * 495 * Returns nothing. 496 */ 497 static void 498 _transport_delete_phy(struct MPT3SAS_ADAPTER *ioc, 499 struct _sas_port *mpt3sas_port, struct _sas_phy *mpt3sas_phy) 500 { 501 u64 sas_address = mpt3sas_port->remote_identify.sas_address; 502 503 dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, 504 "remove: sas_addr(0x%016llx), phy(%d)\n", 505 (unsigned long long) sas_address, mpt3sas_phy->phy_id); 506 507 list_del(&mpt3sas_phy->port_siblings); 508 mpt3sas_port->num_phys--; 509 sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy); 510 mpt3sas_phy->phy_belongs_to_port = 0; 511 } 512 513 /** 514 * _transport_add_phy - helper function to adding single phy to port 515 * @ioc: per adapter object 516 * @mpt3sas_port: mpt3sas per port object 517 * @mpt3sas_phy: mpt3sas per phy object 518 * 519 * Returns nothing. 520 */ 521 static void 522 _transport_add_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_port *mpt3sas_port, 523 struct _sas_phy *mpt3sas_phy) 524 { 525 u64 sas_address = mpt3sas_port->remote_identify.sas_address; 526 527 dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, 528 "add: sas_addr(0x%016llx), phy(%d)\n", (unsigned long long) 529 sas_address, mpt3sas_phy->phy_id); 530 531 list_add_tail(&mpt3sas_phy->port_siblings, &mpt3sas_port->phy_list); 532 mpt3sas_port->num_phys++; 533 sas_port_add_phy(mpt3sas_port->port, mpt3sas_phy->phy); 534 mpt3sas_phy->phy_belongs_to_port = 1; 535 } 536 537 /** 538 * _transport_add_phy_to_an_existing_port - adding new phy to existing port 539 * @ioc: per adapter object 540 * @sas_node: sas node object (either expander or sas host) 541 * @mpt3sas_phy: mpt3sas per phy object 542 * @sas_address: sas address of device/expander were phy needs to be added to 543 * 544 * Returns nothing. 545 */ 546 static void 547 _transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc, 548 struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy, 549 u64 sas_address) 550 { 551 struct _sas_port *mpt3sas_port; 552 struct _sas_phy *phy_srch; 553 554 if (mpt3sas_phy->phy_belongs_to_port == 1) 555 return; 556 557 list_for_each_entry(mpt3sas_port, &sas_node->sas_port_list, 558 port_list) { 559 if (mpt3sas_port->remote_identify.sas_address != 560 sas_address) 561 continue; 562 list_for_each_entry(phy_srch, &mpt3sas_port->phy_list, 563 port_siblings) { 564 if (phy_srch == mpt3sas_phy) 565 return; 566 } 567 _transport_add_phy(ioc, mpt3sas_port, mpt3sas_phy); 568 return; 569 } 570 571 } 572 573 /** 574 * _transport_del_phy_from_an_existing_port - delete phy from existing port 575 * @ioc: per adapter object 576 * @sas_node: sas node object (either expander or sas host) 577 * @mpt3sas_phy: mpt3sas per phy object 578 * 579 * Returns nothing. 580 */ 581 static void 582 _transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc, 583 struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy) 584 { 585 struct _sas_port *mpt3sas_port, *next; 586 struct _sas_phy *phy_srch; 587 588 if (mpt3sas_phy->phy_belongs_to_port == 0) 589 return; 590 591 list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list, 592 port_list) { 593 list_for_each_entry(phy_srch, &mpt3sas_port->phy_list, 594 port_siblings) { 595 if (phy_srch != mpt3sas_phy) 596 continue; 597 598 if (mpt3sas_port->num_phys == 1) 599 _transport_delete_port(ioc, mpt3sas_port); 600 else 601 _transport_delete_phy(ioc, mpt3sas_port, 602 mpt3sas_phy); 603 return; 604 } 605 } 606 } 607 608 /** 609 * _transport_sanity_check - sanity check when adding a new port 610 * @ioc: per adapter object 611 * @sas_node: sas node object (either expander or sas host) 612 * @sas_address: sas address of device being added 613 * 614 * See the explanation above from _transport_delete_duplicate_port 615 */ 616 static void 617 _transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, 618 u64 sas_address) 619 { 620 int i; 621 622 for (i = 0; i < sas_node->num_phys; i++) { 623 if (sas_node->phy[i].remote_identify.sas_address != sas_address) 624 continue; 625 if (sas_node->phy[i].phy_belongs_to_port == 1) 626 _transport_del_phy_from_an_existing_port(ioc, sas_node, 627 &sas_node->phy[i]); 628 } 629 } 630 631 /** 632 * mpt3sas_transport_port_add - insert port to the list 633 * @ioc: per adapter object 634 * @handle: handle of attached device 635 * @sas_address: sas address of parent expander or sas host 636 * Context: This function will acquire ioc->sas_node_lock. 637 * 638 * Adding new port object to the sas_node->sas_port_list. 639 * 640 * Returns mpt3sas_port. 641 */ 642 struct _sas_port * 643 mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, 644 u64 sas_address) 645 { 646 struct _sas_phy *mpt3sas_phy, *next; 647 struct _sas_port *mpt3sas_port; 648 unsigned long flags; 649 struct _sas_node *sas_node; 650 struct sas_rphy *rphy; 651 int i; 652 struct sas_port *port; 653 654 mpt3sas_port = kzalloc(sizeof(struct _sas_port), 655 GFP_KERNEL); 656 if (!mpt3sas_port) { 657 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 658 ioc->name, __FILE__, __LINE__, __func__); 659 return NULL; 660 } 661 662 INIT_LIST_HEAD(&mpt3sas_port->port_list); 663 INIT_LIST_HEAD(&mpt3sas_port->phy_list); 664 spin_lock_irqsave(&ioc->sas_node_lock, flags); 665 sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address); 666 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 667 668 if (!sas_node) { 669 pr_err(MPT3SAS_FMT 670 "%s: Could not find parent sas_address(0x%016llx)!\n", 671 ioc->name, __func__, (unsigned long long)sas_address); 672 goto out_fail; 673 } 674 675 if ((_transport_set_identify(ioc, handle, 676 &mpt3sas_port->remote_identify))) { 677 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 678 ioc->name, __FILE__, __LINE__, __func__); 679 goto out_fail; 680 } 681 682 if (mpt3sas_port->remote_identify.device_type == SAS_PHY_UNUSED) { 683 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 684 ioc->name, __FILE__, __LINE__, __func__); 685 goto out_fail; 686 } 687 688 _transport_sanity_check(ioc, sas_node, 689 mpt3sas_port->remote_identify.sas_address); 690 691 for (i = 0; i < sas_node->num_phys; i++) { 692 if (sas_node->phy[i].remote_identify.sas_address != 693 mpt3sas_port->remote_identify.sas_address) 694 continue; 695 list_add_tail(&sas_node->phy[i].port_siblings, 696 &mpt3sas_port->phy_list); 697 mpt3sas_port->num_phys++; 698 } 699 700 if (!mpt3sas_port->num_phys) { 701 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 702 ioc->name, __FILE__, __LINE__, __func__); 703 goto out_fail; 704 } 705 706 port = sas_port_alloc_num(sas_node->parent_dev); 707 if ((sas_port_add(port))) { 708 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 709 ioc->name, __FILE__, __LINE__, __func__); 710 goto out_fail; 711 } 712 713 list_for_each_entry(mpt3sas_phy, &mpt3sas_port->phy_list, 714 port_siblings) { 715 if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) 716 dev_printk(KERN_INFO, &port->dev, 717 "add: handle(0x%04x), sas_addr(0x%016llx), phy(%d)\n", 718 handle, (unsigned long long) 719 mpt3sas_port->remote_identify.sas_address, 720 mpt3sas_phy->phy_id); 721 sas_port_add_phy(port, mpt3sas_phy->phy); 722 mpt3sas_phy->phy_belongs_to_port = 1; 723 } 724 725 mpt3sas_port->port = port; 726 if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) 727 rphy = sas_end_device_alloc(port); 728 else 729 rphy = sas_expander_alloc(port, 730 mpt3sas_port->remote_identify.device_type); 731 732 rphy->identify = mpt3sas_port->remote_identify; 733 if ((sas_rphy_add(rphy))) { 734 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 735 ioc->name, __FILE__, __LINE__, __func__); 736 } 737 if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) 738 dev_printk(KERN_INFO, &rphy->dev, 739 "add: handle(0x%04x), sas_addr(0x%016llx)\n", 740 handle, (unsigned long long) 741 mpt3sas_port->remote_identify.sas_address); 742 mpt3sas_port->rphy = rphy; 743 spin_lock_irqsave(&ioc->sas_node_lock, flags); 744 list_add_tail(&mpt3sas_port->port_list, &sas_node->sas_port_list); 745 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 746 747 /* fill in report manufacture */ 748 if (mpt3sas_port->remote_identify.device_type == 749 MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || 750 mpt3sas_port->remote_identify.device_type == 751 MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) 752 _transport_expander_report_manufacture(ioc, 753 mpt3sas_port->remote_identify.sas_address, 754 rphy_to_expander_device(rphy)); 755 return mpt3sas_port; 756 757 out_fail: 758 list_for_each_entry_safe(mpt3sas_phy, next, &mpt3sas_port->phy_list, 759 port_siblings) 760 list_del(&mpt3sas_phy->port_siblings); 761 kfree(mpt3sas_port); 762 return NULL; 763 } 764 765 /** 766 * mpt3sas_transport_port_remove - remove port from the list 767 * @ioc: per adapter object 768 * @sas_address: sas address of attached device 769 * @sas_address_parent: sas address of parent expander or sas host 770 * Context: This function will acquire ioc->sas_node_lock. 771 * 772 * Removing object and freeing associated memory from the 773 * ioc->sas_port_list. 774 * 775 * Return nothing. 776 */ 777 void 778 mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, 779 u64 sas_address_parent) 780 { 781 int i; 782 unsigned long flags; 783 struct _sas_port *mpt3sas_port, *next; 784 struct _sas_node *sas_node; 785 u8 found = 0; 786 struct _sas_phy *mpt3sas_phy, *next_phy; 787 788 spin_lock_irqsave(&ioc->sas_node_lock, flags); 789 sas_node = _transport_sas_node_find_by_sas_address(ioc, 790 sas_address_parent); 791 if (!sas_node) { 792 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 793 return; 794 } 795 list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list, 796 port_list) { 797 if (mpt3sas_port->remote_identify.sas_address != sas_address) 798 continue; 799 found = 1; 800 list_del(&mpt3sas_port->port_list); 801 goto out; 802 } 803 out: 804 if (!found) { 805 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 806 return; 807 } 808 809 for (i = 0; i < sas_node->num_phys; i++) { 810 if (sas_node->phy[i].remote_identify.sas_address == sas_address) 811 memset(&sas_node->phy[i].remote_identify, 0 , 812 sizeof(struct sas_identify)); 813 } 814 815 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 816 817 list_for_each_entry_safe(mpt3sas_phy, next_phy, 818 &mpt3sas_port->phy_list, port_siblings) { 819 if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) 820 dev_printk(KERN_INFO, &mpt3sas_port->port->dev, 821 "remove: sas_addr(0x%016llx), phy(%d)\n", 822 (unsigned long long) 823 mpt3sas_port->remote_identify.sas_address, 824 mpt3sas_phy->phy_id); 825 mpt3sas_phy->phy_belongs_to_port = 0; 826 sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy); 827 list_del(&mpt3sas_phy->port_siblings); 828 } 829 sas_port_delete(mpt3sas_port->port); 830 kfree(mpt3sas_port); 831 } 832 833 /** 834 * mpt3sas_transport_add_host_phy - report sas_host phy to transport 835 * @ioc: per adapter object 836 * @mpt3sas_phy: mpt3sas per phy object 837 * @phy_pg0: sas phy page 0 838 * @parent_dev: parent device class object 839 * 840 * Returns 0 for success, non-zero for failure. 841 */ 842 int 843 mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy 844 *mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev) 845 { 846 struct sas_phy *phy; 847 int phy_index = mpt3sas_phy->phy_id; 848 849 850 INIT_LIST_HEAD(&mpt3sas_phy->port_siblings); 851 phy = sas_phy_alloc(parent_dev, phy_index); 852 if (!phy) { 853 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 854 ioc->name, __FILE__, __LINE__, __func__); 855 return -1; 856 } 857 if ((_transport_set_identify(ioc, mpt3sas_phy->handle, 858 &mpt3sas_phy->identify))) { 859 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 860 ioc->name, __FILE__, __LINE__, __func__); 861 sas_phy_free(phy); 862 return -1; 863 } 864 phy->identify = mpt3sas_phy->identify; 865 mpt3sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle); 866 if (mpt3sas_phy->attached_handle) 867 _transport_set_identify(ioc, mpt3sas_phy->attached_handle, 868 &mpt3sas_phy->remote_identify); 869 phy->identify.phy_identifier = mpt3sas_phy->phy_id; 870 phy->negotiated_linkrate = _transport_convert_phy_link_rate( 871 phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); 872 phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( 873 phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); 874 phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( 875 phy_pg0.HwLinkRate >> 4); 876 phy->minimum_linkrate = _transport_convert_phy_link_rate( 877 phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); 878 phy->maximum_linkrate = _transport_convert_phy_link_rate( 879 phy_pg0.ProgrammedLinkRate >> 4); 880 881 if ((sas_phy_add(phy))) { 882 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 883 ioc->name, __FILE__, __LINE__, __func__); 884 sas_phy_free(phy); 885 return -1; 886 } 887 if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) 888 dev_printk(KERN_INFO, &phy->dev, 889 "add: handle(0x%04x), sas_addr(0x%016llx)\n" 890 "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", 891 mpt3sas_phy->handle, (unsigned long long) 892 mpt3sas_phy->identify.sas_address, 893 mpt3sas_phy->attached_handle, 894 (unsigned long long) 895 mpt3sas_phy->remote_identify.sas_address); 896 mpt3sas_phy->phy = phy; 897 return 0; 898 } 899 900 901 /** 902 * mpt3sas_transport_add_expander_phy - report expander phy to transport 903 * @ioc: per adapter object 904 * @mpt3sas_phy: mpt3sas per phy object 905 * @expander_pg1: expander page 1 906 * @parent_dev: parent device class object 907 * 908 * Returns 0 for success, non-zero for failure. 909 */ 910 int 911 mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy 912 *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1, 913 struct device *parent_dev) 914 { 915 struct sas_phy *phy; 916 int phy_index = mpt3sas_phy->phy_id; 917 918 INIT_LIST_HEAD(&mpt3sas_phy->port_siblings); 919 phy = sas_phy_alloc(parent_dev, phy_index); 920 if (!phy) { 921 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 922 ioc->name, __FILE__, __LINE__, __func__); 923 return -1; 924 } 925 if ((_transport_set_identify(ioc, mpt3sas_phy->handle, 926 &mpt3sas_phy->identify))) { 927 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 928 ioc->name, __FILE__, __LINE__, __func__); 929 sas_phy_free(phy); 930 return -1; 931 } 932 phy->identify = mpt3sas_phy->identify; 933 mpt3sas_phy->attached_handle = 934 le16_to_cpu(expander_pg1.AttachedDevHandle); 935 if (mpt3sas_phy->attached_handle) 936 _transport_set_identify(ioc, mpt3sas_phy->attached_handle, 937 &mpt3sas_phy->remote_identify); 938 phy->identify.phy_identifier = mpt3sas_phy->phy_id; 939 phy->negotiated_linkrate = _transport_convert_phy_link_rate( 940 expander_pg1.NegotiatedLinkRate & 941 MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); 942 phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( 943 expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); 944 phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( 945 expander_pg1.HwLinkRate >> 4); 946 phy->minimum_linkrate = _transport_convert_phy_link_rate( 947 expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); 948 phy->maximum_linkrate = _transport_convert_phy_link_rate( 949 expander_pg1.ProgrammedLinkRate >> 4); 950 951 if ((sas_phy_add(phy))) { 952 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 953 ioc->name, __FILE__, __LINE__, __func__); 954 sas_phy_free(phy); 955 return -1; 956 } 957 if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) 958 dev_printk(KERN_INFO, &phy->dev, 959 "add: handle(0x%04x), sas_addr(0x%016llx)\n" 960 "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", 961 mpt3sas_phy->handle, (unsigned long long) 962 mpt3sas_phy->identify.sas_address, 963 mpt3sas_phy->attached_handle, 964 (unsigned long long) 965 mpt3sas_phy->remote_identify.sas_address); 966 mpt3sas_phy->phy = phy; 967 return 0; 968 } 969 970 /** 971 * mpt3sas_transport_update_links - refreshing phy link changes 972 * @ioc: per adapter object 973 * @sas_address: sas address of parent expander or sas host 974 * @handle: attached device handle 975 * @phy_numberv: phy number 976 * @link_rate: new link rate 977 * 978 * Returns nothing. 979 */ 980 void 981 mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, 982 u64 sas_address, u16 handle, u8 phy_number, u8 link_rate) 983 { 984 unsigned long flags; 985 struct _sas_node *sas_node; 986 struct _sas_phy *mpt3sas_phy; 987 988 if (ioc->shost_recovery || ioc->pci_error_recovery) 989 return; 990 991 spin_lock_irqsave(&ioc->sas_node_lock, flags); 992 sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address); 993 if (!sas_node) { 994 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 995 return; 996 } 997 998 mpt3sas_phy = &sas_node->phy[phy_number]; 999 mpt3sas_phy->attached_handle = handle; 1000 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1001 if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) { 1002 _transport_set_identify(ioc, handle, 1003 &mpt3sas_phy->remote_identify); 1004 _transport_add_phy_to_an_existing_port(ioc, sas_node, 1005 mpt3sas_phy, mpt3sas_phy->remote_identify.sas_address); 1006 } else { 1007 memset(&mpt3sas_phy->remote_identify, 0 , sizeof(struct 1008 sas_identify)); 1009 _transport_del_phy_from_an_existing_port(ioc, sas_node, 1010 mpt3sas_phy); 1011 } 1012 1013 if (mpt3sas_phy->phy) 1014 mpt3sas_phy->phy->negotiated_linkrate = 1015 _transport_convert_phy_link_rate(link_rate); 1016 1017 if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) 1018 dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, 1019 "refresh: parent sas_addr(0x%016llx),\n" 1020 "\tlink_rate(0x%02x), phy(%d)\n" 1021 "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", 1022 (unsigned long long)sas_address, 1023 link_rate, phy_number, handle, (unsigned long long) 1024 mpt3sas_phy->remote_identify.sas_address); 1025 } 1026 1027 static inline void * 1028 phy_to_ioc(struct sas_phy *phy) 1029 { 1030 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); 1031 return shost_priv(shost); 1032 } 1033 1034 static inline void * 1035 rphy_to_ioc(struct sas_rphy *rphy) 1036 { 1037 struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); 1038 return shost_priv(shost); 1039 } 1040 1041 /* report phy error log structure */ 1042 struct phy_error_log_request { 1043 u8 smp_frame_type; /* 0x40 */ 1044 u8 function; /* 0x11 */ 1045 u8 allocated_response_length; 1046 u8 request_length; /* 02 */ 1047 u8 reserved_1[5]; 1048 u8 phy_identifier; 1049 u8 reserved_2[2]; 1050 }; 1051 1052 /* report phy error log reply structure */ 1053 struct phy_error_log_reply { 1054 u8 smp_frame_type; /* 0x41 */ 1055 u8 function; /* 0x11 */ 1056 u8 function_result; 1057 u8 response_length; 1058 __be16 expander_change_count; 1059 u8 reserved_1[3]; 1060 u8 phy_identifier; 1061 u8 reserved_2[2]; 1062 __be32 invalid_dword; 1063 __be32 running_disparity_error; 1064 __be32 loss_of_dword_sync; 1065 __be32 phy_reset_problem; 1066 }; 1067 1068 /** 1069 * _transport_get_expander_phy_error_log - return expander counters 1070 * @ioc: per adapter object 1071 * @phy: The sas phy object 1072 * 1073 * Returns 0 for success, non-zero for failure. 1074 * 1075 */ 1076 static int 1077 _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc, 1078 struct sas_phy *phy) 1079 { 1080 Mpi2SmpPassthroughRequest_t *mpi_request; 1081 Mpi2SmpPassthroughReply_t *mpi_reply; 1082 struct phy_error_log_request *phy_error_log_request; 1083 struct phy_error_log_reply *phy_error_log_reply; 1084 int rc; 1085 u16 smid; 1086 u32 ioc_state; 1087 unsigned long timeleft; 1088 void *psge; 1089 u8 issue_reset = 0; 1090 void *data_out = NULL; 1091 dma_addr_t data_out_dma; 1092 u32 sz; 1093 u16 wait_state_count; 1094 1095 if (ioc->shost_recovery || ioc->pci_error_recovery) { 1096 pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", 1097 __func__, ioc->name); 1098 return -EFAULT; 1099 } 1100 1101 mutex_lock(&ioc->transport_cmds.mutex); 1102 1103 if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { 1104 pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", 1105 ioc->name, __func__); 1106 rc = -EAGAIN; 1107 goto out; 1108 } 1109 ioc->transport_cmds.status = MPT3_CMD_PENDING; 1110 1111 wait_state_count = 0; 1112 ioc_state = mpt3sas_base_get_iocstate(ioc, 1); 1113 while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { 1114 if (wait_state_count++ == 10) { 1115 pr_err(MPT3SAS_FMT 1116 "%s: failed due to ioc not operational\n", 1117 ioc->name, __func__); 1118 rc = -EFAULT; 1119 goto out; 1120 } 1121 ssleep(1); 1122 ioc_state = mpt3sas_base_get_iocstate(ioc, 1); 1123 pr_info(MPT3SAS_FMT 1124 "%s: waiting for operational state(count=%d)\n", 1125 ioc->name, __func__, wait_state_count); 1126 } 1127 if (wait_state_count) 1128 pr_info(MPT3SAS_FMT "%s: ioc is operational\n", 1129 ioc->name, __func__); 1130 1131 smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); 1132 if (!smid) { 1133 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", 1134 ioc->name, __func__); 1135 rc = -EAGAIN; 1136 goto out; 1137 } 1138 1139 mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); 1140 ioc->transport_cmds.smid = smid; 1141 1142 sz = sizeof(struct phy_error_log_request) + 1143 sizeof(struct phy_error_log_reply); 1144 data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma); 1145 if (!data_out) { 1146 pr_err("failure at %s:%d/%s()!\n", __FILE__, 1147 __LINE__, __func__); 1148 rc = -ENOMEM; 1149 mpt3sas_base_free_smid(ioc, smid); 1150 goto out; 1151 } 1152 1153 rc = -EINVAL; 1154 memset(data_out, 0, sz); 1155 phy_error_log_request = data_out; 1156 phy_error_log_request->smp_frame_type = 0x40; 1157 phy_error_log_request->function = 0x11; 1158 phy_error_log_request->request_length = 2; 1159 phy_error_log_request->allocated_response_length = 0; 1160 phy_error_log_request->phy_identifier = phy->number; 1161 1162 memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); 1163 mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; 1164 mpi_request->PhysicalPort = 0xFF; 1165 mpi_request->VF_ID = 0; /* TODO */ 1166 mpi_request->VP_ID = 0; 1167 mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); 1168 mpi_request->RequestDataLength = 1169 cpu_to_le16(sizeof(struct phy_error_log_request)); 1170 psge = &mpi_request->SGL; 1171 1172 ioc->build_sg(ioc, psge, data_out_dma, 1173 sizeof(struct phy_error_log_request), 1174 data_out_dma + sizeof(struct phy_error_log_request), 1175 sizeof(struct phy_error_log_reply)); 1176 1177 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 1178 "phy_error_log - send to sas_addr(0x%016llx), phy(%d)\n", 1179 ioc->name, (unsigned long long)phy->identify.sas_address, 1180 phy->number)); 1181 init_completion(&ioc->transport_cmds.done); 1182 mpt3sas_base_put_smid_default(ioc, smid); 1183 timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, 1184 10*HZ); 1185 1186 if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { 1187 pr_err(MPT3SAS_FMT "%s: timeout\n", 1188 ioc->name, __func__); 1189 _debug_dump_mf(mpi_request, 1190 sizeof(Mpi2SmpPassthroughRequest_t)/4); 1191 if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) 1192 issue_reset = 1; 1193 goto issue_host_reset; 1194 } 1195 1196 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 1197 "phy_error_log - complete\n", ioc->name)); 1198 1199 if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { 1200 1201 mpi_reply = ioc->transport_cmds.reply; 1202 1203 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 1204 "phy_error_log - reply data transfer size(%d)\n", 1205 ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); 1206 1207 if (le16_to_cpu(mpi_reply->ResponseDataLength) != 1208 sizeof(struct phy_error_log_reply)) 1209 goto out; 1210 1211 phy_error_log_reply = data_out + 1212 sizeof(struct phy_error_log_request); 1213 1214 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 1215 "phy_error_log - function_result(%d)\n", 1216 ioc->name, phy_error_log_reply->function_result)); 1217 1218 phy->invalid_dword_count = 1219 be32_to_cpu(phy_error_log_reply->invalid_dword); 1220 phy->running_disparity_error_count = 1221 be32_to_cpu(phy_error_log_reply->running_disparity_error); 1222 phy->loss_of_dword_sync_count = 1223 be32_to_cpu(phy_error_log_reply->loss_of_dword_sync); 1224 phy->phy_reset_problem_count = 1225 be32_to_cpu(phy_error_log_reply->phy_reset_problem); 1226 rc = 0; 1227 } else 1228 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 1229 "phy_error_log - no reply\n", ioc->name)); 1230 1231 issue_host_reset: 1232 if (issue_reset) 1233 mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, 1234 FORCE_BIG_HAMMER); 1235 out: 1236 ioc->transport_cmds.status = MPT3_CMD_NOT_USED; 1237 if (data_out) 1238 pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma); 1239 1240 mutex_unlock(&ioc->transport_cmds.mutex); 1241 return rc; 1242 } 1243 1244 /** 1245 * _transport_get_linkerrors - return phy counters for both hba and expanders 1246 * @phy: The sas phy object 1247 * 1248 * Returns 0 for success, non-zero for failure. 1249 * 1250 */ 1251 static int 1252 _transport_get_linkerrors(struct sas_phy *phy) 1253 { 1254 struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); 1255 unsigned long flags; 1256 Mpi2ConfigReply_t mpi_reply; 1257 Mpi2SasPhyPage1_t phy_pg1; 1258 1259 spin_lock_irqsave(&ioc->sas_node_lock, flags); 1260 if (_transport_sas_node_find_by_sas_address(ioc, 1261 phy->identify.sas_address) == NULL) { 1262 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1263 return -EINVAL; 1264 } 1265 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1266 1267 if (phy->identify.sas_address != ioc->sas_hba.sas_address) 1268 return _transport_get_expander_phy_error_log(ioc, phy); 1269 1270 /* get hba phy error logs */ 1271 if ((mpt3sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1, 1272 phy->number))) { 1273 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1274 ioc->name, __FILE__, __LINE__, __func__); 1275 return -ENXIO; 1276 } 1277 1278 if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) 1279 pr_info(MPT3SAS_FMT 1280 "phy(%d), ioc_status (0x%04x), loginfo(0x%08x)\n", 1281 ioc->name, phy->number, 1282 le16_to_cpu(mpi_reply.IOCStatus), 1283 le32_to_cpu(mpi_reply.IOCLogInfo)); 1284 1285 phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount); 1286 phy->running_disparity_error_count = 1287 le32_to_cpu(phy_pg1.RunningDisparityErrorCount); 1288 phy->loss_of_dword_sync_count = 1289 le32_to_cpu(phy_pg1.LossDwordSynchCount); 1290 phy->phy_reset_problem_count = 1291 le32_to_cpu(phy_pg1.PhyResetProblemCount); 1292 return 0; 1293 } 1294 1295 /** 1296 * _transport_get_enclosure_identifier - 1297 * @phy: The sas phy object 1298 * 1299 * Obtain the enclosure logical id for an expander. 1300 * Returns 0 for success, non-zero for failure. 1301 */ 1302 static int 1303 _transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) 1304 { 1305 struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy); 1306 struct _sas_device *sas_device; 1307 unsigned long flags; 1308 int rc; 1309 1310 spin_lock_irqsave(&ioc->sas_device_lock, flags); 1311 sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, 1312 rphy->identify.sas_address); 1313 if (sas_device) { 1314 *identifier = sas_device->enclosure_logical_id; 1315 rc = 0; 1316 } else { 1317 *identifier = 0; 1318 rc = -ENXIO; 1319 } 1320 spin_unlock_irqrestore(&ioc->sas_device_lock, flags); 1321 return rc; 1322 } 1323 1324 /** 1325 * _transport_get_bay_identifier - 1326 * @phy: The sas phy object 1327 * 1328 * Returns the slot id for a device that resides inside an enclosure. 1329 */ 1330 static int 1331 _transport_get_bay_identifier(struct sas_rphy *rphy) 1332 { 1333 struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy); 1334 struct _sas_device *sas_device; 1335 unsigned long flags; 1336 int rc; 1337 1338 spin_lock_irqsave(&ioc->sas_device_lock, flags); 1339 sas_device = mpt3sas_scsih_sas_device_find_by_sas_address(ioc, 1340 rphy->identify.sas_address); 1341 if (sas_device) 1342 rc = sas_device->slot; 1343 else 1344 rc = -ENXIO; 1345 spin_unlock_irqrestore(&ioc->sas_device_lock, flags); 1346 return rc; 1347 } 1348 1349 /* phy control request structure */ 1350 struct phy_control_request { 1351 u8 smp_frame_type; /* 0x40 */ 1352 u8 function; /* 0x91 */ 1353 u8 allocated_response_length; 1354 u8 request_length; /* 0x09 */ 1355 u16 expander_change_count; 1356 u8 reserved_1[3]; 1357 u8 phy_identifier; 1358 u8 phy_operation; 1359 u8 reserved_2[13]; 1360 u64 attached_device_name; 1361 u8 programmed_min_physical_link_rate; 1362 u8 programmed_max_physical_link_rate; 1363 u8 reserved_3[6]; 1364 }; 1365 1366 /* phy control reply structure */ 1367 struct phy_control_reply { 1368 u8 smp_frame_type; /* 0x41 */ 1369 u8 function; /* 0x11 */ 1370 u8 function_result; 1371 u8 response_length; 1372 }; 1373 1374 #define SMP_PHY_CONTROL_LINK_RESET (0x01) 1375 #define SMP_PHY_CONTROL_HARD_RESET (0x02) 1376 #define SMP_PHY_CONTROL_DISABLE (0x03) 1377 1378 /** 1379 * _transport_expander_phy_control - expander phy control 1380 * @ioc: per adapter object 1381 * @phy: The sas phy object 1382 * 1383 * Returns 0 for success, non-zero for failure. 1384 * 1385 */ 1386 static int 1387 _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc, 1388 struct sas_phy *phy, u8 phy_operation) 1389 { 1390 Mpi2SmpPassthroughRequest_t *mpi_request; 1391 Mpi2SmpPassthroughReply_t *mpi_reply; 1392 struct phy_control_request *phy_control_request; 1393 struct phy_control_reply *phy_control_reply; 1394 int rc; 1395 u16 smid; 1396 u32 ioc_state; 1397 unsigned long timeleft; 1398 void *psge; 1399 u32 sgl_flags; 1400 u8 issue_reset = 0; 1401 void *data_out = NULL; 1402 dma_addr_t data_out_dma; 1403 u32 sz; 1404 u16 wait_state_count; 1405 1406 if (ioc->shost_recovery || ioc->pci_error_recovery) { 1407 pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", 1408 __func__, ioc->name); 1409 return -EFAULT; 1410 } 1411 1412 mutex_lock(&ioc->transport_cmds.mutex); 1413 1414 if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { 1415 pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", 1416 ioc->name, __func__); 1417 rc = -EAGAIN; 1418 goto out; 1419 } 1420 ioc->transport_cmds.status = MPT3_CMD_PENDING; 1421 1422 wait_state_count = 0; 1423 ioc_state = mpt3sas_base_get_iocstate(ioc, 1); 1424 while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { 1425 if (wait_state_count++ == 10) { 1426 pr_err(MPT3SAS_FMT 1427 "%s: failed due to ioc not operational\n", 1428 ioc->name, __func__); 1429 rc = -EFAULT; 1430 goto out; 1431 } 1432 ssleep(1); 1433 ioc_state = mpt3sas_base_get_iocstate(ioc, 1); 1434 pr_info(MPT3SAS_FMT 1435 "%s: waiting for operational state(count=%d)\n", 1436 ioc->name, __func__, wait_state_count); 1437 } 1438 if (wait_state_count) 1439 pr_info(MPT3SAS_FMT "%s: ioc is operational\n", 1440 ioc->name, __func__); 1441 1442 smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); 1443 if (!smid) { 1444 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", 1445 ioc->name, __func__); 1446 rc = -EAGAIN; 1447 goto out; 1448 } 1449 1450 mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); 1451 ioc->transport_cmds.smid = smid; 1452 1453 sz = sizeof(struct phy_control_request) + 1454 sizeof(struct phy_control_reply); 1455 data_out = pci_alloc_consistent(ioc->pdev, sz, &data_out_dma); 1456 if (!data_out) { 1457 pr_err("failure at %s:%d/%s()!\n", __FILE__, 1458 __LINE__, __func__); 1459 rc = -ENOMEM; 1460 mpt3sas_base_free_smid(ioc, smid); 1461 goto out; 1462 } 1463 1464 rc = -EINVAL; 1465 memset(data_out, 0, sz); 1466 phy_control_request = data_out; 1467 phy_control_request->smp_frame_type = 0x40; 1468 phy_control_request->function = 0x91; 1469 phy_control_request->request_length = 9; 1470 phy_control_request->allocated_response_length = 0; 1471 phy_control_request->phy_identifier = phy->number; 1472 phy_control_request->phy_operation = phy_operation; 1473 phy_control_request->programmed_min_physical_link_rate = 1474 phy->minimum_linkrate << 4; 1475 phy_control_request->programmed_max_physical_link_rate = 1476 phy->maximum_linkrate << 4; 1477 1478 memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); 1479 mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; 1480 mpi_request->PhysicalPort = 0xFF; 1481 mpi_request->VF_ID = 0; /* TODO */ 1482 mpi_request->VP_ID = 0; 1483 mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); 1484 mpi_request->RequestDataLength = 1485 cpu_to_le16(sizeof(struct phy_error_log_request)); 1486 psge = &mpi_request->SGL; 1487 1488 /* WRITE sgel first */ 1489 sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | 1490 MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); 1491 sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; 1492 ioc->base_add_sg_single(psge, sgl_flags | 1493 sizeof(struct phy_control_request), data_out_dma); 1494 1495 /* incr sgel */ 1496 psge += ioc->sge_size; 1497 1498 /* READ sgel last */ 1499 sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | 1500 MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | 1501 MPI2_SGE_FLAGS_END_OF_LIST); 1502 sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; 1503 ioc->base_add_sg_single(psge, sgl_flags | 1504 sizeof(struct phy_control_reply), data_out_dma + 1505 sizeof(struct phy_control_request)); 1506 1507 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 1508 "phy_control - send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n", 1509 ioc->name, (unsigned long long)phy->identify.sas_address, 1510 phy->number, phy_operation)); 1511 init_completion(&ioc->transport_cmds.done); 1512 mpt3sas_base_put_smid_default(ioc, smid); 1513 timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, 1514 10*HZ); 1515 1516 if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { 1517 pr_err(MPT3SAS_FMT "%s: timeout\n", 1518 ioc->name, __func__); 1519 _debug_dump_mf(mpi_request, 1520 sizeof(Mpi2SmpPassthroughRequest_t)/4); 1521 if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) 1522 issue_reset = 1; 1523 goto issue_host_reset; 1524 } 1525 1526 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 1527 "phy_control - complete\n", ioc->name)); 1528 1529 if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { 1530 1531 mpi_reply = ioc->transport_cmds.reply; 1532 1533 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 1534 "phy_control - reply data transfer size(%d)\n", 1535 ioc->name, le16_to_cpu(mpi_reply->ResponseDataLength))); 1536 1537 if (le16_to_cpu(mpi_reply->ResponseDataLength) != 1538 sizeof(struct phy_control_reply)) 1539 goto out; 1540 1541 phy_control_reply = data_out + 1542 sizeof(struct phy_control_request); 1543 1544 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 1545 "phy_control - function_result(%d)\n", 1546 ioc->name, phy_control_reply->function_result)); 1547 1548 rc = 0; 1549 } else 1550 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 1551 "phy_control - no reply\n", ioc->name)); 1552 1553 issue_host_reset: 1554 if (issue_reset) 1555 mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, 1556 FORCE_BIG_HAMMER); 1557 out: 1558 ioc->transport_cmds.status = MPT3_CMD_NOT_USED; 1559 if (data_out) 1560 pci_free_consistent(ioc->pdev, sz, data_out, data_out_dma); 1561 1562 mutex_unlock(&ioc->transport_cmds.mutex); 1563 return rc; 1564 } 1565 1566 /** 1567 * _transport_phy_reset - 1568 * @phy: The sas phy object 1569 * @hard_reset: 1570 * 1571 * Returns 0 for success, non-zero for failure. 1572 */ 1573 static int 1574 _transport_phy_reset(struct sas_phy *phy, int hard_reset) 1575 { 1576 struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); 1577 Mpi2SasIoUnitControlReply_t mpi_reply; 1578 Mpi2SasIoUnitControlRequest_t mpi_request; 1579 unsigned long flags; 1580 1581 spin_lock_irqsave(&ioc->sas_node_lock, flags); 1582 if (_transport_sas_node_find_by_sas_address(ioc, 1583 phy->identify.sas_address) == NULL) { 1584 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1585 return -EINVAL; 1586 } 1587 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1588 1589 /* handle expander phys */ 1590 if (phy->identify.sas_address != ioc->sas_hba.sas_address) 1591 return _transport_expander_phy_control(ioc, phy, 1592 (hard_reset == 1) ? SMP_PHY_CONTROL_HARD_RESET : 1593 SMP_PHY_CONTROL_LINK_RESET); 1594 1595 /* handle hba phys */ 1596 memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlReply_t)); 1597 mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; 1598 mpi_request.Operation = hard_reset ? 1599 MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET; 1600 mpi_request.PhyNum = phy->number; 1601 1602 if ((mpt3sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) { 1603 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1604 ioc->name, __FILE__, __LINE__, __func__); 1605 return -ENXIO; 1606 } 1607 1608 if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) 1609 pr_info(MPT3SAS_FMT 1610 "phy(%d), ioc_status(0x%04x), loginfo(0x%08x)\n", 1611 ioc->name, phy->number, le16_to_cpu(mpi_reply.IOCStatus), 1612 le32_to_cpu(mpi_reply.IOCLogInfo)); 1613 1614 return 0; 1615 } 1616 1617 /** 1618 * _transport_phy_enable - enable/disable phys 1619 * @phy: The sas phy object 1620 * @enable: enable phy when true 1621 * 1622 * Only support sas_host direct attached phys. 1623 * Returns 0 for success, non-zero for failure. 1624 */ 1625 static int 1626 _transport_phy_enable(struct sas_phy *phy, int enable) 1627 { 1628 struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); 1629 Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; 1630 Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; 1631 Mpi2ConfigReply_t mpi_reply; 1632 u16 ioc_status; 1633 u16 sz; 1634 int rc = 0; 1635 unsigned long flags; 1636 int i, discovery_active; 1637 1638 spin_lock_irqsave(&ioc->sas_node_lock, flags); 1639 if (_transport_sas_node_find_by_sas_address(ioc, 1640 phy->identify.sas_address) == NULL) { 1641 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1642 return -EINVAL; 1643 } 1644 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1645 1646 /* handle expander phys */ 1647 if (phy->identify.sas_address != ioc->sas_hba.sas_address) 1648 return _transport_expander_phy_control(ioc, phy, 1649 (enable == 1) ? SMP_PHY_CONTROL_LINK_RESET : 1650 SMP_PHY_CONTROL_DISABLE); 1651 1652 /* handle hba phys */ 1653 1654 /* read sas_iounit page 0 */ 1655 sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * 1656 sizeof(Mpi2SasIOUnit0PhyData_t)); 1657 sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); 1658 if (!sas_iounit_pg0) { 1659 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1660 ioc->name, __FILE__, __LINE__, __func__); 1661 rc = -ENOMEM; 1662 goto out; 1663 } 1664 if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, 1665 sas_iounit_pg0, sz))) { 1666 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1667 ioc->name, __FILE__, __LINE__, __func__); 1668 rc = -ENXIO; 1669 goto out; 1670 } 1671 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & 1672 MPI2_IOCSTATUS_MASK; 1673 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { 1674 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1675 ioc->name, __FILE__, __LINE__, __func__); 1676 rc = -EIO; 1677 goto out; 1678 } 1679 1680 /* unable to enable/disable phys when when discovery is active */ 1681 for (i = 0, discovery_active = 0; i < ioc->sas_hba.num_phys ; i++) { 1682 if (sas_iounit_pg0->PhyData[i].PortFlags & 1683 MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS) { 1684 pr_err(MPT3SAS_FMT "discovery is active on " \ 1685 "port = %d, phy = %d: unable to enable/disable " 1686 "phys, try again later!\n", ioc->name, 1687 sas_iounit_pg0->PhyData[i].Port, i); 1688 discovery_active = 1; 1689 } 1690 } 1691 1692 if (discovery_active) { 1693 rc = -EAGAIN; 1694 goto out; 1695 } 1696 1697 /* read sas_iounit page 1 */ 1698 sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * 1699 sizeof(Mpi2SasIOUnit1PhyData_t)); 1700 sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); 1701 if (!sas_iounit_pg1) { 1702 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1703 ioc->name, __FILE__, __LINE__, __func__); 1704 rc = -ENOMEM; 1705 goto out; 1706 } 1707 if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, 1708 sas_iounit_pg1, sz))) { 1709 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1710 ioc->name, __FILE__, __LINE__, __func__); 1711 rc = -ENXIO; 1712 goto out; 1713 } 1714 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & 1715 MPI2_IOCSTATUS_MASK; 1716 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { 1717 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1718 ioc->name, __FILE__, __LINE__, __func__); 1719 rc = -EIO; 1720 goto out; 1721 } 1722 1723 /* copy Port/PortFlags/PhyFlags from page 0 */ 1724 for (i = 0; i < ioc->sas_hba.num_phys ; i++) { 1725 sas_iounit_pg1->PhyData[i].Port = 1726 sas_iounit_pg0->PhyData[i].Port; 1727 sas_iounit_pg1->PhyData[i].PortFlags = 1728 (sas_iounit_pg0->PhyData[i].PortFlags & 1729 MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG); 1730 sas_iounit_pg1->PhyData[i].PhyFlags = 1731 (sas_iounit_pg0->PhyData[i].PhyFlags & 1732 (MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED + 1733 MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED)); 1734 } 1735 1736 if (enable) 1737 sas_iounit_pg1->PhyData[phy->number].PhyFlags 1738 &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; 1739 else 1740 sas_iounit_pg1->PhyData[phy->number].PhyFlags 1741 |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; 1742 1743 mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz); 1744 1745 /* link reset */ 1746 if (enable) 1747 _transport_phy_reset(phy, 0); 1748 1749 out: 1750 kfree(sas_iounit_pg1); 1751 kfree(sas_iounit_pg0); 1752 return rc; 1753 } 1754 1755 /** 1756 * _transport_phy_speed - set phy min/max link rates 1757 * @phy: The sas phy object 1758 * @rates: rates defined in sas_phy_linkrates 1759 * 1760 * Only support sas_host direct attached phys. 1761 * Returns 0 for success, non-zero for failure. 1762 */ 1763 static int 1764 _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) 1765 { 1766 struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); 1767 Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; 1768 Mpi2SasPhyPage0_t phy_pg0; 1769 Mpi2ConfigReply_t mpi_reply; 1770 u16 ioc_status; 1771 u16 sz; 1772 int i; 1773 int rc = 0; 1774 unsigned long flags; 1775 1776 spin_lock_irqsave(&ioc->sas_node_lock, flags); 1777 if (_transport_sas_node_find_by_sas_address(ioc, 1778 phy->identify.sas_address) == NULL) { 1779 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1780 return -EINVAL; 1781 } 1782 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1783 1784 if (!rates->minimum_linkrate) 1785 rates->minimum_linkrate = phy->minimum_linkrate; 1786 else if (rates->minimum_linkrate < phy->minimum_linkrate_hw) 1787 rates->minimum_linkrate = phy->minimum_linkrate_hw; 1788 1789 if (!rates->maximum_linkrate) 1790 rates->maximum_linkrate = phy->maximum_linkrate; 1791 else if (rates->maximum_linkrate > phy->maximum_linkrate_hw) 1792 rates->maximum_linkrate = phy->maximum_linkrate_hw; 1793 1794 /* handle expander phys */ 1795 if (phy->identify.sas_address != ioc->sas_hba.sas_address) { 1796 phy->minimum_linkrate = rates->minimum_linkrate; 1797 phy->maximum_linkrate = rates->maximum_linkrate; 1798 return _transport_expander_phy_control(ioc, phy, 1799 SMP_PHY_CONTROL_LINK_RESET); 1800 } 1801 1802 /* handle hba phys */ 1803 1804 /* sas_iounit page 1 */ 1805 sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * 1806 sizeof(Mpi2SasIOUnit1PhyData_t)); 1807 sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); 1808 if (!sas_iounit_pg1) { 1809 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1810 ioc->name, __FILE__, __LINE__, __func__); 1811 rc = -ENOMEM; 1812 goto out; 1813 } 1814 if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, 1815 sas_iounit_pg1, sz))) { 1816 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1817 ioc->name, __FILE__, __LINE__, __func__); 1818 rc = -ENXIO; 1819 goto out; 1820 } 1821 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & 1822 MPI2_IOCSTATUS_MASK; 1823 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { 1824 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1825 ioc->name, __FILE__, __LINE__, __func__); 1826 rc = -EIO; 1827 goto out; 1828 } 1829 1830 for (i = 0; i < ioc->sas_hba.num_phys; i++) { 1831 if (phy->number != i) { 1832 sas_iounit_pg1->PhyData[i].MaxMinLinkRate = 1833 (ioc->sas_hba.phy[i].phy->minimum_linkrate + 1834 (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4)); 1835 } else { 1836 sas_iounit_pg1->PhyData[i].MaxMinLinkRate = 1837 (rates->minimum_linkrate + 1838 (rates->maximum_linkrate << 4)); 1839 } 1840 } 1841 1842 if (mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, 1843 sz)) { 1844 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", 1845 ioc->name, __FILE__, __LINE__, __func__); 1846 rc = -ENXIO; 1847 goto out; 1848 } 1849 1850 /* link reset */ 1851 _transport_phy_reset(phy, 0); 1852 1853 /* read phy page 0, then update the rates in the sas transport phy */ 1854 if (!mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, 1855 phy->number)) { 1856 phy->minimum_linkrate = _transport_convert_phy_link_rate( 1857 phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); 1858 phy->maximum_linkrate = _transport_convert_phy_link_rate( 1859 phy_pg0.ProgrammedLinkRate >> 4); 1860 phy->negotiated_linkrate = _transport_convert_phy_link_rate( 1861 phy_pg0.NegotiatedLinkRate & 1862 MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); 1863 } 1864 1865 out: 1866 kfree(sas_iounit_pg1); 1867 return rc; 1868 } 1869 1870 /** 1871 * _transport_smp_handler - transport portal for smp passthru 1872 * @shost: shost object 1873 * @rphy: sas transport rphy object 1874 * @req: 1875 * 1876 * This used primarily for smp_utils. 1877 * Example: 1878 * smp_rep_general /sys/class/bsg/expander-5:0 1879 */ 1880 static int 1881 _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, 1882 struct request *req) 1883 { 1884 struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); 1885 Mpi2SmpPassthroughRequest_t *mpi_request; 1886 Mpi2SmpPassthroughReply_t *mpi_reply; 1887 int rc, i; 1888 u16 smid; 1889 u32 ioc_state; 1890 unsigned long timeleft; 1891 void *psge; 1892 u8 issue_reset = 0; 1893 dma_addr_t dma_addr_in = 0; 1894 dma_addr_t dma_addr_out = 0; 1895 dma_addr_t pci_dma_in = 0; 1896 dma_addr_t pci_dma_out = 0; 1897 void *pci_addr_in = NULL; 1898 void *pci_addr_out = NULL; 1899 u16 wait_state_count; 1900 struct request *rsp = req->next_rq; 1901 struct bio_vec *bvec = NULL; 1902 1903 if (!rsp) { 1904 pr_err(MPT3SAS_FMT "%s: the smp response space is missing\n", 1905 ioc->name, __func__); 1906 return -EINVAL; 1907 } 1908 1909 if (ioc->shost_recovery || ioc->pci_error_recovery) { 1910 pr_info(MPT3SAS_FMT "%s: host reset in progress!\n", 1911 __func__, ioc->name); 1912 return -EFAULT; 1913 } 1914 1915 rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex); 1916 if (rc) 1917 return rc; 1918 1919 if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { 1920 pr_err(MPT3SAS_FMT "%s: transport_cmds in use\n", ioc->name, 1921 __func__); 1922 rc = -EAGAIN; 1923 goto out; 1924 } 1925 ioc->transport_cmds.status = MPT3_CMD_PENDING; 1926 1927 /* Check if the request is split across multiple segments */ 1928 if (req->bio->bi_vcnt > 1) { 1929 u32 offset = 0; 1930 1931 /* Allocate memory and copy the request */ 1932 pci_addr_out = pci_alloc_consistent(ioc->pdev, 1933 blk_rq_bytes(req), &pci_dma_out); 1934 if (!pci_addr_out) { 1935 pr_info(MPT3SAS_FMT "%s(): PCI Addr out = NULL\n", 1936 ioc->name, __func__); 1937 rc = -ENOMEM; 1938 goto out; 1939 } 1940 1941 bio_for_each_segment(bvec, req->bio, i) { 1942 memcpy(pci_addr_out + offset, 1943 page_address(bvec->bv_page) + bvec->bv_offset, 1944 bvec->bv_len); 1945 offset += bvec->bv_len; 1946 } 1947 } else { 1948 dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio), 1949 blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL); 1950 if (!dma_addr_out) { 1951 pr_info(MPT3SAS_FMT "%s(): DMA Addr out = NULL\n", 1952 ioc->name, __func__); 1953 rc = -ENOMEM; 1954 goto free_pci; 1955 } 1956 } 1957 1958 /* Check if the response needs to be populated across 1959 * multiple segments */ 1960 if (rsp->bio->bi_vcnt > 1) { 1961 pci_addr_in = pci_alloc_consistent(ioc->pdev, blk_rq_bytes(rsp), 1962 &pci_dma_in); 1963 if (!pci_addr_in) { 1964 pr_info(MPT3SAS_FMT "%s(): PCI Addr in = NULL\n", 1965 ioc->name, __func__); 1966 rc = -ENOMEM; 1967 goto unmap; 1968 } 1969 } else { 1970 dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio), 1971 blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL); 1972 if (!dma_addr_in) { 1973 pr_info(MPT3SAS_FMT "%s(): DMA Addr in = NULL\n", 1974 ioc->name, __func__); 1975 rc = -ENOMEM; 1976 goto unmap; 1977 } 1978 } 1979 1980 wait_state_count = 0; 1981 ioc_state = mpt3sas_base_get_iocstate(ioc, 1); 1982 while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { 1983 if (wait_state_count++ == 10) { 1984 pr_err(MPT3SAS_FMT 1985 "%s: failed due to ioc not operational\n", 1986 ioc->name, __func__); 1987 rc = -EFAULT; 1988 goto unmap; 1989 } 1990 ssleep(1); 1991 ioc_state = mpt3sas_base_get_iocstate(ioc, 1); 1992 pr_info(MPT3SAS_FMT 1993 "%s: waiting for operational state(count=%d)\n", 1994 ioc->name, __func__, wait_state_count); 1995 } 1996 if (wait_state_count) 1997 pr_info(MPT3SAS_FMT "%s: ioc is operational\n", 1998 ioc->name, __func__); 1999 2000 smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); 2001 if (!smid) { 2002 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", 2003 ioc->name, __func__); 2004 rc = -EAGAIN; 2005 goto unmap; 2006 } 2007 2008 rc = 0; 2009 mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); 2010 ioc->transport_cmds.smid = smid; 2011 2012 memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); 2013 mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; 2014 mpi_request->PhysicalPort = 0xFF; 2015 mpi_request->SASAddress = (rphy) ? 2016 cpu_to_le64(rphy->identify.sas_address) : 2017 cpu_to_le64(ioc->sas_hba.sas_address); 2018 mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4); 2019 psge = &mpi_request->SGL; 2020 2021 if (req->bio->bi_vcnt > 1) 2022 ioc->build_sg(ioc, psge, pci_dma_out, (blk_rq_bytes(req) - 4), 2023 pci_dma_in, (blk_rq_bytes(rsp) + 4)); 2024 else 2025 ioc->build_sg(ioc, psge, dma_addr_out, (blk_rq_bytes(req) - 4), 2026 dma_addr_in, (blk_rq_bytes(rsp) + 4)); 2027 2028 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 2029 "%s - sending smp request\n", ioc->name, __func__)); 2030 2031 init_completion(&ioc->transport_cmds.done); 2032 mpt3sas_base_put_smid_default(ioc, smid); 2033 timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done, 2034 10*HZ); 2035 2036 if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { 2037 pr_err(MPT3SAS_FMT "%s : timeout\n", 2038 __func__, ioc->name); 2039 _debug_dump_mf(mpi_request, 2040 sizeof(Mpi2SmpPassthroughRequest_t)/4); 2041 if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) 2042 issue_reset = 1; 2043 goto issue_host_reset; 2044 } 2045 2046 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 2047 "%s - complete\n", ioc->name, __func__)); 2048 2049 if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { 2050 2051 mpi_reply = ioc->transport_cmds.reply; 2052 2053 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 2054 "%s - reply data transfer size(%d)\n", 2055 ioc->name, __func__, 2056 le16_to_cpu(mpi_reply->ResponseDataLength))); 2057 2058 memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); 2059 req->sense_len = sizeof(*mpi_reply); 2060 req->resid_len = 0; 2061 rsp->resid_len -= 2062 le16_to_cpu(mpi_reply->ResponseDataLength); 2063 2064 /* check if the resp needs to be copied from the allocated 2065 * pci mem */ 2066 if (rsp->bio->bi_vcnt > 1) { 2067 u32 offset = 0; 2068 u32 bytes_to_copy = 2069 le16_to_cpu(mpi_reply->ResponseDataLength); 2070 bio_for_each_segment(bvec, rsp->bio, i) { 2071 if (bytes_to_copy <= bvec->bv_len) { 2072 memcpy(page_address(bvec->bv_page) + 2073 bvec->bv_offset, pci_addr_in + 2074 offset, bytes_to_copy); 2075 break; 2076 } else { 2077 memcpy(page_address(bvec->bv_page) + 2078 bvec->bv_offset, pci_addr_in + 2079 offset, bvec->bv_len); 2080 bytes_to_copy -= bvec->bv_len; 2081 } 2082 offset += bvec->bv_len; 2083 } 2084 } 2085 } else { 2086 dtransportprintk(ioc, pr_info(MPT3SAS_FMT 2087 "%s - no reply\n", ioc->name, __func__)); 2088 rc = -ENXIO; 2089 } 2090 2091 issue_host_reset: 2092 if (issue_reset) { 2093 mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, 2094 FORCE_BIG_HAMMER); 2095 rc = -ETIMEDOUT; 2096 } 2097 2098 unmap: 2099 if (dma_addr_out) 2100 pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req), 2101 PCI_DMA_BIDIRECTIONAL); 2102 if (dma_addr_in) 2103 pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp), 2104 PCI_DMA_BIDIRECTIONAL); 2105 2106 free_pci: 2107 if (pci_addr_out) 2108 pci_free_consistent(ioc->pdev, blk_rq_bytes(req), pci_addr_out, 2109 pci_dma_out); 2110 2111 if (pci_addr_in) 2112 pci_free_consistent(ioc->pdev, blk_rq_bytes(rsp), pci_addr_in, 2113 pci_dma_in); 2114 2115 out: 2116 ioc->transport_cmds.status = MPT3_CMD_NOT_USED; 2117 mutex_unlock(&ioc->transport_cmds.mutex); 2118 return rc; 2119 } 2120 2121 struct sas_function_template mpt3sas_transport_functions = { 2122 .get_linkerrors = _transport_get_linkerrors, 2123 .get_enclosure_identifier = _transport_get_enclosure_identifier, 2124 .get_bay_identifier = _transport_get_bay_identifier, 2125 .phy_reset = _transport_phy_reset, 2126 .phy_enable = _transport_phy_enable, 2127 .set_phy_speed = _transport_phy_speed, 2128 .smp_handler = _transport_smp_handler, 2129 }; 2130 2131 struct scsi_transport_template *mpt3sas_transport_template; 2132