1 /* 2 * SAS Transport Layer for MPT (Message Passing Technology) based controllers 3 * 4 * This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c 5 * Copyright (C) 2012-2014 LSI Corporation 6 * Copyright (C) 2013-2014 Avago Technologies 7 * (mailto: MPT-FusionLinux.pdl@avagotech.com) 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; either version 2 12 * of the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * NO WARRANTY 20 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 21 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 22 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 23 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 24 * solely responsible for determining the appropriateness of using and 25 * distributing the Program and assumes all risks associated with its 26 * exercise of rights under this Agreement, including but not limited to 27 * the risks and costs of program errors, damage to or loss of data, 28 * programs or equipment, and unavailability or interruption of operations. 29 30 * DISCLAIMER OF LIABILITY 31 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 32 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 34 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 35 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 36 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 37 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 38 39 * You should have received a copy of the GNU General Public License 40 * along with this program; if not, write to the Free Software 41 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 42 * USA. 43 */ 44 45 #include <linux/module.h> 46 #include <linux/kernel.h> 47 #include <linux/init.h> 48 #include <linux/errno.h> 49 #include <linux/sched.h> 50 #include <linux/workqueue.h> 51 #include <linux/delay.h> 52 #include <linux/pci.h> 53 54 #include <scsi/scsi.h> 55 #include <scsi/scsi_cmnd.h> 56 #include <scsi/scsi_device.h> 57 #include <scsi/scsi_host.h> 58 #include <scsi/scsi_transport_sas.h> 59 #include <scsi/scsi_dbg.h> 60 61 #include "mpt3sas_base.h" 62 63 /** 64 * _transport_get_port_id_by_sas_phy - get zone's port id that Phy belong to 65 * @phy: sas_phy object 66 * 67 * Return Port number 68 */ 69 static inline u8 70 _transport_get_port_id_by_sas_phy(struct sas_phy *phy) 71 { 72 u8 port_id = 0xFF; 73 struct hba_port *port = phy->hostdata; 74 75 if (port) 76 port_id = port->port_id; 77 78 return port_id; 79 } 80 81 /** 82 * _transport_sas_node_find_by_sas_address - sas node search 83 * @ioc: per adapter object 84 * @sas_address: sas address of expander or sas host 85 * @port: hba port entry 86 * Context: Calling function should acquire ioc->sas_node_lock. 87 * 88 * Search for either hba phys or expander device based on handle, then returns 89 * the sas_node object. 90 */ 91 static struct _sas_node * 92 _transport_sas_node_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc, 93 u64 sas_address, struct hba_port *port) 94 { 95 if (ioc->sas_hba.sas_address == sas_address) 96 return &ioc->sas_hba; 97 else 98 return mpt3sas_scsih_expander_find_by_sas_address(ioc, 99 sas_address, port); 100 } 101 102 /** 103 * _transport_get_port_id_by_rphy - Get Port number from rphy object 104 * @ioc: per adapter object 105 * @rphy: sas_rphy object 106 * 107 * Returns Port number. 108 */ 109 static u8 110 _transport_get_port_id_by_rphy(struct MPT3SAS_ADAPTER *ioc, 111 struct sas_rphy *rphy) 112 { 113 struct _sas_node *sas_expander; 114 struct _sas_device *sas_device; 115 unsigned long flags; 116 u8 port_id = 0xFF; 117 118 if (!rphy) 119 return port_id; 120 121 if (rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE || 122 rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) { 123 spin_lock_irqsave(&ioc->sas_node_lock, flags); 124 list_for_each_entry(sas_expander, 125 &ioc->sas_expander_list, list) { 126 if (sas_expander->rphy == rphy) { 127 port_id = sas_expander->port->port_id; 128 break; 129 } 130 } 131 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 132 } else if (rphy->identify.device_type == SAS_END_DEVICE) { 133 spin_lock_irqsave(&ioc->sas_device_lock, flags); 134 sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy); 135 if (sas_device) { 136 port_id = sas_device->port->port_id; 137 sas_device_put(sas_device); 138 } 139 spin_unlock_irqrestore(&ioc->sas_device_lock, flags); 140 } 141 142 return port_id; 143 } 144 145 /** 146 * _transport_convert_phy_link_rate - 147 * @link_rate: link rate returned from mpt firmware 148 * 149 * Convert link_rate from mpi fusion into sas_transport form. 150 */ 151 static enum sas_linkrate 152 _transport_convert_phy_link_rate(u8 link_rate) 153 { 154 enum sas_linkrate rc; 155 156 switch (link_rate) { 157 case MPI2_SAS_NEG_LINK_RATE_1_5: 158 rc = SAS_LINK_RATE_1_5_GBPS; 159 break; 160 case MPI2_SAS_NEG_LINK_RATE_3_0: 161 rc = SAS_LINK_RATE_3_0_GBPS; 162 break; 163 case MPI2_SAS_NEG_LINK_RATE_6_0: 164 rc = SAS_LINK_RATE_6_0_GBPS; 165 break; 166 case MPI25_SAS_NEG_LINK_RATE_12_0: 167 rc = SAS_LINK_RATE_12_0_GBPS; 168 break; 169 case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED: 170 rc = SAS_PHY_DISABLED; 171 break; 172 case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED: 173 rc = SAS_LINK_RATE_FAILED; 174 break; 175 case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR: 176 rc = SAS_SATA_PORT_SELECTOR; 177 break; 178 case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS: 179 rc = SAS_PHY_RESET_IN_PROGRESS; 180 break; 181 182 default: 183 case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE: 184 case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE: 185 rc = SAS_LINK_RATE_UNKNOWN; 186 break; 187 } 188 return rc; 189 } 190 191 /** 192 * _transport_set_identify - set identify for phys and end devices 193 * @ioc: per adapter object 194 * @handle: device handle 195 * @identify: sas identify info 196 * 197 * Populates sas identify info. 198 * 199 * Return: 0 for success, non-zero for failure. 200 */ 201 static int 202 _transport_set_identify(struct MPT3SAS_ADAPTER *ioc, u16 handle, 203 struct sas_identify *identify) 204 { 205 Mpi2SasDevicePage0_t sas_device_pg0; 206 Mpi2ConfigReply_t mpi_reply; 207 u32 device_info; 208 u32 ioc_status; 209 210 if (ioc->shost_recovery || ioc->pci_error_recovery) { 211 ioc_info(ioc, "%s: host reset in progress!\n", __func__); 212 return -EFAULT; 213 } 214 215 if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, 216 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { 217 ioc_err(ioc, "failure at %s:%d/%s()!\n", 218 __FILE__, __LINE__, __func__); 219 return -ENXIO; 220 } 221 222 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & 223 MPI2_IOCSTATUS_MASK; 224 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { 225 ioc_err(ioc, "handle(0x%04x), ioc_status(0x%04x) failure at %s:%d/%s()!\n", 226 handle, ioc_status, __FILE__, __LINE__, __func__); 227 return -EIO; 228 } 229 230 memset(identify, 0, sizeof(struct sas_identify)); 231 device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); 232 233 /* sas_address */ 234 identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress); 235 236 /* phy number of the parent device this device is linked to */ 237 identify->phy_identifier = sas_device_pg0.PhyNum; 238 239 /* device_type */ 240 switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) { 241 case MPI2_SAS_DEVICE_INFO_NO_DEVICE: 242 identify->device_type = SAS_PHY_UNUSED; 243 break; 244 case MPI2_SAS_DEVICE_INFO_END_DEVICE: 245 identify->device_type = SAS_END_DEVICE; 246 break; 247 case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER: 248 identify->device_type = SAS_EDGE_EXPANDER_DEVICE; 249 break; 250 case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER: 251 identify->device_type = SAS_FANOUT_EXPANDER_DEVICE; 252 break; 253 } 254 255 /* initiator_port_protocols */ 256 if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR) 257 identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; 258 if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR) 259 identify->initiator_port_protocols |= SAS_PROTOCOL_STP; 260 if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR) 261 identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; 262 if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST) 263 identify->initiator_port_protocols |= SAS_PROTOCOL_SATA; 264 265 /* target_port_protocols */ 266 if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) 267 identify->target_port_protocols |= SAS_PROTOCOL_SSP; 268 if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) 269 identify->target_port_protocols |= SAS_PROTOCOL_STP; 270 if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) 271 identify->target_port_protocols |= SAS_PROTOCOL_SMP; 272 if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) 273 identify->target_port_protocols |= SAS_PROTOCOL_SATA; 274 275 return 0; 276 } 277 278 /** 279 * mpt3sas_transport_done - internal transport layer callback handler. 280 * @ioc: per adapter object 281 * @smid: system request message index 282 * @msix_index: MSIX table index supplied by the OS 283 * @reply: reply message frame(lower 32bit addr) 284 * 285 * Callback handler when sending internal generated transport cmds. 286 * The callback index passed is `ioc->transport_cb_idx` 287 * 288 * Return: 1 meaning mf should be freed from _base_interrupt 289 * 0 means the mf is freed from this function. 290 */ 291 u8 292 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 293 u32 reply) 294 { 295 MPI2DefaultReply_t *mpi_reply; 296 297 mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); 298 if (ioc->transport_cmds.status == MPT3_CMD_NOT_USED) 299 return 1; 300 if (ioc->transport_cmds.smid != smid) 301 return 1; 302 ioc->transport_cmds.status |= MPT3_CMD_COMPLETE; 303 if (mpi_reply) { 304 memcpy(ioc->transport_cmds.reply, mpi_reply, 305 mpi_reply->MsgLength*4); 306 ioc->transport_cmds.status |= MPT3_CMD_REPLY_VALID; 307 } 308 ioc->transport_cmds.status &= ~MPT3_CMD_PENDING; 309 complete(&ioc->transport_cmds.done); 310 return 1; 311 } 312 313 /* report manufacture request structure */ 314 struct rep_manu_request { 315 u8 smp_frame_type; 316 u8 function; 317 u8 reserved; 318 u8 request_length; 319 }; 320 321 /* report manufacture reply structure */ 322 struct rep_manu_reply { 323 u8 smp_frame_type; /* 0x41 */ 324 u8 function; /* 0x01 */ 325 u8 function_result; 326 u8 response_length; 327 u16 expander_change_count; 328 u8 reserved0[2]; 329 u8 sas_format; 330 u8 reserved2[3]; 331 u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN]; 332 u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN]; 333 u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN]; 334 u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN]; 335 u16 component_id; 336 u8 component_revision_id; 337 u8 reserved3; 338 u8 vendor_specific[8]; 339 }; 340 341 /** 342 * _transport_expander_report_manufacture - obtain SMP report_manufacture 343 * @ioc: per adapter object 344 * @sas_address: expander sas address 345 * @edev: the sas_expander_device object 346 * @port_id: Port ID number 347 * 348 * Fills in the sas_expander_device object when SMP port is created. 349 * 350 * Return: 0 for success, non-zero for failure. 351 */ 352 static int 353 _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc, 354 u64 sas_address, struct sas_expander_device *edev, u8 port_id) 355 { 356 Mpi2SmpPassthroughRequest_t *mpi_request; 357 Mpi2SmpPassthroughReply_t *mpi_reply; 358 struct rep_manu_reply *manufacture_reply; 359 struct rep_manu_request *manufacture_request; 360 int rc; 361 u16 smid; 362 void *psge; 363 u8 issue_reset = 0; 364 void *data_out = NULL; 365 dma_addr_t data_out_dma; 366 dma_addr_t data_in_dma; 367 size_t data_in_sz; 368 size_t data_out_sz; 369 370 if (ioc->shost_recovery || ioc->pci_error_recovery) { 371 ioc_info(ioc, "%s: host reset in progress!\n", __func__); 372 return -EFAULT; 373 } 374 375 mutex_lock(&ioc->transport_cmds.mutex); 376 377 if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { 378 ioc_err(ioc, "%s: transport_cmds in use\n", __func__); 379 rc = -EAGAIN; 380 goto out; 381 } 382 ioc->transport_cmds.status = MPT3_CMD_PENDING; 383 384 rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT); 385 if (rc) 386 goto out; 387 388 smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); 389 if (!smid) { 390 ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); 391 rc = -EAGAIN; 392 goto out; 393 } 394 395 rc = 0; 396 mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); 397 ioc->transport_cmds.smid = smid; 398 399 data_out_sz = sizeof(struct rep_manu_request); 400 data_in_sz = sizeof(struct rep_manu_reply); 401 data_out = dma_alloc_coherent(&ioc->pdev->dev, data_out_sz + data_in_sz, 402 &data_out_dma, GFP_KERNEL); 403 if (!data_out) { 404 pr_err("failure at %s:%d/%s()!\n", __FILE__, 405 __LINE__, __func__); 406 rc = -ENOMEM; 407 mpt3sas_base_free_smid(ioc, smid); 408 goto out; 409 } 410 411 data_in_dma = data_out_dma + sizeof(struct rep_manu_request); 412 413 manufacture_request = data_out; 414 manufacture_request->smp_frame_type = 0x40; 415 manufacture_request->function = 1; 416 manufacture_request->reserved = 0; 417 manufacture_request->request_length = 0; 418 419 memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); 420 mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; 421 mpi_request->PhysicalPort = port_id; 422 mpi_request->SASAddress = cpu_to_le64(sas_address); 423 mpi_request->RequestDataLength = cpu_to_le16(data_out_sz); 424 psge = &mpi_request->SGL; 425 426 ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma, 427 data_in_sz); 428 429 dtransportprintk(ioc, 430 ioc_info(ioc, "report_manufacture - send to sas_addr(0x%016llx)\n", 431 (u64)sas_address)); 432 init_completion(&ioc->transport_cmds.done); 433 ioc->put_smid_default(ioc, smid); 434 wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); 435 436 if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { 437 ioc_err(ioc, "%s: timeout\n", __func__); 438 _debug_dump_mf(mpi_request, 439 sizeof(Mpi2SmpPassthroughRequest_t)/4); 440 if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) 441 issue_reset = 1; 442 goto issue_host_reset; 443 } 444 445 dtransportprintk(ioc, ioc_info(ioc, "report_manufacture - complete\n")); 446 447 if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { 448 u8 *tmp; 449 450 mpi_reply = ioc->transport_cmds.reply; 451 452 dtransportprintk(ioc, 453 ioc_info(ioc, "report_manufacture - reply data transfer size(%d)\n", 454 le16_to_cpu(mpi_reply->ResponseDataLength))); 455 456 if (le16_to_cpu(mpi_reply->ResponseDataLength) != 457 sizeof(struct rep_manu_reply)) 458 goto out; 459 460 manufacture_reply = data_out + sizeof(struct rep_manu_request); 461 strncpy(edev->vendor_id, manufacture_reply->vendor_id, 462 SAS_EXPANDER_VENDOR_ID_LEN); 463 strncpy(edev->product_id, manufacture_reply->product_id, 464 SAS_EXPANDER_PRODUCT_ID_LEN); 465 strncpy(edev->product_rev, manufacture_reply->product_rev, 466 SAS_EXPANDER_PRODUCT_REV_LEN); 467 edev->level = manufacture_reply->sas_format & 1; 468 if (edev->level) { 469 strncpy(edev->component_vendor_id, 470 manufacture_reply->component_vendor_id, 471 SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); 472 tmp = (u8 *)&manufacture_reply->component_id; 473 edev->component_id = tmp[0] << 8 | tmp[1]; 474 edev->component_revision_id = 475 manufacture_reply->component_revision_id; 476 } 477 } else 478 dtransportprintk(ioc, 479 ioc_info(ioc, "report_manufacture - no reply\n")); 480 481 issue_host_reset: 482 if (issue_reset) 483 mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); 484 out: 485 ioc->transport_cmds.status = MPT3_CMD_NOT_USED; 486 if (data_out) 487 dma_free_coherent(&ioc->pdev->dev, data_out_sz + data_in_sz, 488 data_out, data_out_dma); 489 490 mutex_unlock(&ioc->transport_cmds.mutex); 491 return rc; 492 } 493 494 495 /** 496 * _transport_delete_port - helper function to removing a port 497 * @ioc: per adapter object 498 * @mpt3sas_port: mpt3sas per port object 499 */ 500 static void 501 _transport_delete_port(struct MPT3SAS_ADAPTER *ioc, 502 struct _sas_port *mpt3sas_port) 503 { 504 u64 sas_address = mpt3sas_port->remote_identify.sas_address; 505 struct hba_port *port = mpt3sas_port->hba_port; 506 enum sas_device_type device_type = 507 mpt3sas_port->remote_identify.device_type; 508 509 dev_printk(KERN_INFO, &mpt3sas_port->port->dev, 510 "remove: sas_addr(0x%016llx)\n", 511 (unsigned long long) sas_address); 512 513 ioc->logging_level |= MPT_DEBUG_TRANSPORT; 514 if (device_type == SAS_END_DEVICE) 515 mpt3sas_device_remove_by_sas_address(ioc, 516 sas_address, port); 517 else if (device_type == SAS_EDGE_EXPANDER_DEVICE || 518 device_type == SAS_FANOUT_EXPANDER_DEVICE) 519 mpt3sas_expander_remove(ioc, sas_address, port); 520 ioc->logging_level &= ~MPT_DEBUG_TRANSPORT; 521 } 522 523 /** 524 * _transport_delete_phy - helper function to removing single phy from port 525 * @ioc: per adapter object 526 * @mpt3sas_port: mpt3sas per port object 527 * @mpt3sas_phy: mpt3sas per phy object 528 */ 529 static void 530 _transport_delete_phy(struct MPT3SAS_ADAPTER *ioc, 531 struct _sas_port *mpt3sas_port, struct _sas_phy *mpt3sas_phy) 532 { 533 u64 sas_address = mpt3sas_port->remote_identify.sas_address; 534 535 dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, 536 "remove: sas_addr(0x%016llx), phy(%d)\n", 537 (unsigned long long) sas_address, mpt3sas_phy->phy_id); 538 539 list_del(&mpt3sas_phy->port_siblings); 540 mpt3sas_port->num_phys--; 541 sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy); 542 mpt3sas_phy->phy_belongs_to_port = 0; 543 } 544 545 /** 546 * _transport_add_phy - helper function to adding single phy to port 547 * @ioc: per adapter object 548 * @mpt3sas_port: mpt3sas per port object 549 * @mpt3sas_phy: mpt3sas per phy object 550 */ 551 static void 552 _transport_add_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_port *mpt3sas_port, 553 struct _sas_phy *mpt3sas_phy) 554 { 555 u64 sas_address = mpt3sas_port->remote_identify.sas_address; 556 557 dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, 558 "add: sas_addr(0x%016llx), phy(%d)\n", (unsigned long long) 559 sas_address, mpt3sas_phy->phy_id); 560 561 list_add_tail(&mpt3sas_phy->port_siblings, &mpt3sas_port->phy_list); 562 mpt3sas_port->num_phys++; 563 sas_port_add_phy(mpt3sas_port->port, mpt3sas_phy->phy); 564 mpt3sas_phy->phy_belongs_to_port = 1; 565 } 566 567 /** 568 * mpt3sas_transport_add_phy_to_an_existing_port - adding new phy to existing port 569 * @ioc: per adapter object 570 * @sas_node: sas node object (either expander or sas host) 571 * @mpt3sas_phy: mpt3sas per phy object 572 * @sas_address: sas address of device/expander were phy needs to be added to 573 * @port: hba port entry 574 */ 575 void 576 mpt3sas_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc, 577 struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy, 578 u64 sas_address, struct hba_port *port) 579 { 580 struct _sas_port *mpt3sas_port; 581 struct _sas_phy *phy_srch; 582 583 if (mpt3sas_phy->phy_belongs_to_port == 1) 584 return; 585 586 if (!port) 587 return; 588 589 list_for_each_entry(mpt3sas_port, &sas_node->sas_port_list, 590 port_list) { 591 if (mpt3sas_port->remote_identify.sas_address != 592 sas_address) 593 continue; 594 if (mpt3sas_port->hba_port != port) 595 continue; 596 list_for_each_entry(phy_srch, &mpt3sas_port->phy_list, 597 port_siblings) { 598 if (phy_srch == mpt3sas_phy) 599 return; 600 } 601 _transport_add_phy(ioc, mpt3sas_port, mpt3sas_phy); 602 return; 603 } 604 605 } 606 607 /** 608 * mpt3sas_transport_del_phy_from_an_existing_port - delete phy from existing port 609 * @ioc: per adapter object 610 * @sas_node: sas node object (either expander or sas host) 611 * @mpt3sas_phy: mpt3sas per phy object 612 */ 613 void 614 mpt3sas_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc, 615 struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy) 616 { 617 struct _sas_port *mpt3sas_port, *next; 618 struct _sas_phy *phy_srch; 619 620 if (mpt3sas_phy->phy_belongs_to_port == 0) 621 return; 622 623 list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list, 624 port_list) { 625 list_for_each_entry(phy_srch, &mpt3sas_port->phy_list, 626 port_siblings) { 627 if (phy_srch != mpt3sas_phy) 628 continue; 629 630 /* 631 * Don't delete port during host reset, 632 * just delete phy. 633 */ 634 if (mpt3sas_port->num_phys == 1 && !ioc->shost_recovery) 635 _transport_delete_port(ioc, mpt3sas_port); 636 else 637 _transport_delete_phy(ioc, mpt3sas_port, 638 mpt3sas_phy); 639 return; 640 } 641 } 642 } 643 644 /** 645 * _transport_sanity_check - sanity check when adding a new port 646 * @ioc: per adapter object 647 * @sas_node: sas node object (either expander or sas host) 648 * @sas_address: sas address of device being added 649 * @port: hba port entry 650 * 651 * See the explanation above from _transport_delete_duplicate_port 652 */ 653 static void 654 _transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, 655 u64 sas_address, struct hba_port *port) 656 { 657 int i; 658 659 for (i = 0; i < sas_node->num_phys; i++) { 660 if (sas_node->phy[i].remote_identify.sas_address != sas_address) 661 continue; 662 if (sas_node->phy[i].port != port) 663 continue; 664 if (sas_node->phy[i].phy_belongs_to_port == 1) 665 mpt3sas_transport_del_phy_from_an_existing_port(ioc, 666 sas_node, &sas_node->phy[i]); 667 } 668 } 669 670 /** 671 * mpt3sas_transport_port_add - insert port to the list 672 * @ioc: per adapter object 673 * @handle: handle of attached device 674 * @sas_address: sas address of parent expander or sas host 675 * @hba_port: hba port entry 676 * Context: This function will acquire ioc->sas_node_lock. 677 * 678 * Adding new port object to the sas_node->sas_port_list. 679 * 680 * Return: mpt3sas_port. 681 */ 682 struct _sas_port * 683 mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, 684 u64 sas_address, struct hba_port *hba_port) 685 { 686 struct _sas_phy *mpt3sas_phy, *next; 687 struct _sas_port *mpt3sas_port; 688 unsigned long flags; 689 struct _sas_node *sas_node; 690 struct sas_rphy *rphy; 691 struct _sas_device *sas_device = NULL; 692 int i; 693 struct sas_port *port; 694 struct virtual_phy *vphy = NULL; 695 696 if (!hba_port) { 697 ioc_err(ioc, "failure at %s:%d/%s()!\n", 698 __FILE__, __LINE__, __func__); 699 return NULL; 700 } 701 702 mpt3sas_port = kzalloc(sizeof(struct _sas_port), 703 GFP_KERNEL); 704 if (!mpt3sas_port) { 705 ioc_err(ioc, "failure at %s:%d/%s()!\n", 706 __FILE__, __LINE__, __func__); 707 return NULL; 708 } 709 710 INIT_LIST_HEAD(&mpt3sas_port->port_list); 711 INIT_LIST_HEAD(&mpt3sas_port->phy_list); 712 spin_lock_irqsave(&ioc->sas_node_lock, flags); 713 sas_node = _transport_sas_node_find_by_sas_address(ioc, 714 sas_address, hba_port); 715 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 716 717 if (!sas_node) { 718 ioc_err(ioc, "%s: Could not find parent sas_address(0x%016llx)!\n", 719 __func__, (u64)sas_address); 720 goto out_fail; 721 } 722 723 if ((_transport_set_identify(ioc, handle, 724 &mpt3sas_port->remote_identify))) { 725 ioc_err(ioc, "failure at %s:%d/%s()!\n", 726 __FILE__, __LINE__, __func__); 727 goto out_fail; 728 } 729 730 if (mpt3sas_port->remote_identify.device_type == SAS_PHY_UNUSED) { 731 ioc_err(ioc, "failure at %s:%d/%s()!\n", 732 __FILE__, __LINE__, __func__); 733 goto out_fail; 734 } 735 736 mpt3sas_port->hba_port = hba_port; 737 _transport_sanity_check(ioc, sas_node, 738 mpt3sas_port->remote_identify.sas_address, hba_port); 739 740 for (i = 0; i < sas_node->num_phys; i++) { 741 if (sas_node->phy[i].remote_identify.sas_address != 742 mpt3sas_port->remote_identify.sas_address) 743 continue; 744 if (sas_node->phy[i].port != hba_port) 745 continue; 746 list_add_tail(&sas_node->phy[i].port_siblings, 747 &mpt3sas_port->phy_list); 748 mpt3sas_port->num_phys++; 749 if (sas_node->handle <= ioc->sas_hba.num_phys) { 750 if (!sas_node->phy[i].hba_vphy) { 751 hba_port->phy_mask |= (1 << i); 752 continue; 753 } 754 755 vphy = mpt3sas_get_vphy_by_phy(ioc, hba_port, i); 756 if (!vphy) { 757 ioc_err(ioc, "failure at %s:%d/%s()!\n", 758 __FILE__, __LINE__, __func__); 759 goto out_fail; 760 } 761 } 762 } 763 764 if (!mpt3sas_port->num_phys) { 765 ioc_err(ioc, "failure at %s:%d/%s()!\n", 766 __FILE__, __LINE__, __func__); 767 goto out_fail; 768 } 769 770 if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { 771 sas_device = mpt3sas_get_sdev_by_addr(ioc, 772 mpt3sas_port->remote_identify.sas_address, 773 mpt3sas_port->hba_port); 774 if (!sas_device) { 775 ioc_err(ioc, "failure at %s:%d/%s()!\n", 776 __FILE__, __LINE__, __func__); 777 goto out_fail; 778 } 779 sas_device->pend_sas_rphy_add = 1; 780 } 781 782 if (!sas_node->parent_dev) { 783 ioc_err(ioc, "failure at %s:%d/%s()!\n", 784 __FILE__, __LINE__, __func__); 785 goto out_fail; 786 } 787 port = sas_port_alloc_num(sas_node->parent_dev); 788 if (!port || (sas_port_add(port))) { 789 ioc_err(ioc, "failure at %s:%d/%s()!\n", 790 __FILE__, __LINE__, __func__); 791 goto out_fail; 792 } 793 794 list_for_each_entry(mpt3sas_phy, &mpt3sas_port->phy_list, 795 port_siblings) { 796 if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) 797 dev_printk(KERN_INFO, &port->dev, 798 "add: handle(0x%04x), sas_addr(0x%016llx), phy(%d)\n", 799 handle, (unsigned long long) 800 mpt3sas_port->remote_identify.sas_address, 801 mpt3sas_phy->phy_id); 802 sas_port_add_phy(port, mpt3sas_phy->phy); 803 mpt3sas_phy->phy_belongs_to_port = 1; 804 mpt3sas_phy->port = hba_port; 805 } 806 807 mpt3sas_port->port = port; 808 if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { 809 rphy = sas_end_device_alloc(port); 810 sas_device->rphy = rphy; 811 if (sas_node->handle <= ioc->sas_hba.num_phys) { 812 if (!vphy) 813 hba_port->sas_address = 814 sas_device->sas_address; 815 else 816 vphy->sas_address = 817 sas_device->sas_address; 818 } 819 } else { 820 rphy = sas_expander_alloc(port, 821 mpt3sas_port->remote_identify.device_type); 822 if (sas_node->handle <= ioc->sas_hba.num_phys) 823 hba_port->sas_address = 824 mpt3sas_port->remote_identify.sas_address; 825 } 826 827 if (!rphy) { 828 ioc_err(ioc, "failure at %s:%d/%s()!\n", 829 __FILE__, __LINE__, __func__); 830 goto out_delete_port; 831 } 832 833 rphy->identify = mpt3sas_port->remote_identify; 834 835 if ((sas_rphy_add(rphy))) { 836 ioc_err(ioc, "failure at %s:%d/%s()!\n", 837 __FILE__, __LINE__, __func__); 838 sas_rphy_free(rphy); 839 rphy = NULL; 840 goto out_delete_port; 841 } 842 843 if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { 844 sas_device->pend_sas_rphy_add = 0; 845 sas_device_put(sas_device); 846 } 847 848 dev_info(&rphy->dev, 849 "add: handle(0x%04x), sas_addr(0x%016llx)\n", handle, 850 (unsigned long long)mpt3sas_port->remote_identify.sas_address); 851 852 mpt3sas_port->rphy = rphy; 853 spin_lock_irqsave(&ioc->sas_node_lock, flags); 854 list_add_tail(&mpt3sas_port->port_list, &sas_node->sas_port_list); 855 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 856 857 /* fill in report manufacture */ 858 if (mpt3sas_port->remote_identify.device_type == 859 MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || 860 mpt3sas_port->remote_identify.device_type == 861 MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) 862 _transport_expander_report_manufacture(ioc, 863 mpt3sas_port->remote_identify.sas_address, 864 rphy_to_expander_device(rphy), hba_port->port_id); 865 return mpt3sas_port; 866 867 out_delete_port: 868 sas_port_delete(port); 869 870 out_fail: 871 list_for_each_entry_safe(mpt3sas_phy, next, &mpt3sas_port->phy_list, 872 port_siblings) 873 list_del(&mpt3sas_phy->port_siblings); 874 kfree(mpt3sas_port); 875 return NULL; 876 } 877 878 /** 879 * mpt3sas_transport_port_remove - remove port from the list 880 * @ioc: per adapter object 881 * @sas_address: sas address of attached device 882 * @sas_address_parent: sas address of parent expander or sas host 883 * @port: hba port entry 884 * Context: This function will acquire ioc->sas_node_lock. 885 * 886 * Removing object and freeing associated memory from the 887 * ioc->sas_port_list. 888 */ 889 void 890 mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, 891 u64 sas_address_parent, struct hba_port *port) 892 { 893 int i; 894 unsigned long flags; 895 struct _sas_port *mpt3sas_port, *next; 896 struct _sas_node *sas_node; 897 u8 found = 0; 898 struct _sas_phy *mpt3sas_phy, *next_phy; 899 struct hba_port *hba_port_next, *hba_port = NULL; 900 struct virtual_phy *vphy, *vphy_next = NULL; 901 902 if (!port) 903 return; 904 905 spin_lock_irqsave(&ioc->sas_node_lock, flags); 906 sas_node = _transport_sas_node_find_by_sas_address(ioc, 907 sas_address_parent, port); 908 if (!sas_node) { 909 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 910 return; 911 } 912 list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list, 913 port_list) { 914 if (mpt3sas_port->remote_identify.sas_address != sas_address) 915 continue; 916 if (mpt3sas_port->hba_port != port) 917 continue; 918 found = 1; 919 list_del(&mpt3sas_port->port_list); 920 goto out; 921 } 922 out: 923 if (!found) { 924 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 925 return; 926 } 927 928 if (sas_node->handle <= ioc->sas_hba.num_phys && 929 (ioc->multipath_on_hba)) { 930 if (port->vphys_mask) { 931 list_for_each_entry_safe(vphy, vphy_next, 932 &port->vphys_list, list) { 933 if (vphy->sas_address != sas_address) 934 continue; 935 ioc_info(ioc, 936 "remove vphy entry: %p of port:%p,from %d port's vphys list\n", 937 vphy, port, port->port_id); 938 port->vphys_mask &= ~vphy->phy_mask; 939 list_del(&vphy->list); 940 kfree(vphy); 941 } 942 } 943 944 list_for_each_entry_safe(hba_port, hba_port_next, 945 &ioc->port_table_list, list) { 946 if (hba_port != port) 947 continue; 948 /* 949 * Delete hba_port object if 950 * - hba_port object's sas address matches with current 951 * removed device's sas address and no vphy's 952 * associated with it. 953 * - Current removed device is a vSES device and 954 * none of the other direct attached device have 955 * this vSES device's port number (hence hba_port 956 * object sas_address field will be zero). 957 */ 958 if ((hba_port->sas_address == sas_address || 959 !hba_port->sas_address) && !hba_port->vphys_mask) { 960 ioc_info(ioc, 961 "remove hba_port entry: %p port: %d from hba_port list\n", 962 hba_port, hba_port->port_id); 963 list_del(&hba_port->list); 964 kfree(hba_port); 965 } else if (hba_port->sas_address == sas_address && 966 hba_port->vphys_mask) { 967 /* 968 * Current removed device is a non vSES device 969 * and a vSES device has the same port number 970 * as of current device's port number. Hence 971 * only clear the sas_address filed, don't 972 * delete the hba_port object. 973 */ 974 ioc_info(ioc, 975 "clearing sas_address from hba_port entry: %p port: %d from hba_port list\n", 976 hba_port, hba_port->port_id); 977 port->sas_address = 0; 978 } 979 break; 980 } 981 } 982 983 for (i = 0; i < sas_node->num_phys; i++) { 984 if (sas_node->phy[i].remote_identify.sas_address == sas_address) 985 memset(&sas_node->phy[i].remote_identify, 0 , 986 sizeof(struct sas_identify)); 987 } 988 989 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 990 991 list_for_each_entry_safe(mpt3sas_phy, next_phy, 992 &mpt3sas_port->phy_list, port_siblings) { 993 if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) 994 dev_printk(KERN_INFO, &mpt3sas_port->port->dev, 995 "remove: sas_addr(0x%016llx), phy(%d)\n", 996 (unsigned long long) 997 mpt3sas_port->remote_identify.sas_address, 998 mpt3sas_phy->phy_id); 999 mpt3sas_phy->phy_belongs_to_port = 0; 1000 if (!ioc->remove_host) 1001 sas_port_delete_phy(mpt3sas_port->port, 1002 mpt3sas_phy->phy); 1003 list_del(&mpt3sas_phy->port_siblings); 1004 } 1005 if (!ioc->remove_host) 1006 sas_port_delete(mpt3sas_port->port); 1007 ioc_info(ioc, "%s: removed: sas_addr(0x%016llx)\n", 1008 __func__, (unsigned long long)sas_address); 1009 kfree(mpt3sas_port); 1010 } 1011 1012 /** 1013 * mpt3sas_transport_add_host_phy - report sas_host phy to transport 1014 * @ioc: per adapter object 1015 * @mpt3sas_phy: mpt3sas per phy object 1016 * @phy_pg0: sas phy page 0 1017 * @parent_dev: parent device class object 1018 * 1019 * Return: 0 for success, non-zero for failure. 1020 */ 1021 int 1022 mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy 1023 *mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev) 1024 { 1025 struct sas_phy *phy; 1026 int phy_index = mpt3sas_phy->phy_id; 1027 1028 1029 INIT_LIST_HEAD(&mpt3sas_phy->port_siblings); 1030 phy = sas_phy_alloc(parent_dev, phy_index); 1031 if (!phy) { 1032 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1033 __FILE__, __LINE__, __func__); 1034 return -1; 1035 } 1036 if ((_transport_set_identify(ioc, mpt3sas_phy->handle, 1037 &mpt3sas_phy->identify))) { 1038 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1039 __FILE__, __LINE__, __func__); 1040 sas_phy_free(phy); 1041 return -1; 1042 } 1043 phy->identify = mpt3sas_phy->identify; 1044 mpt3sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle); 1045 if (mpt3sas_phy->attached_handle) 1046 _transport_set_identify(ioc, mpt3sas_phy->attached_handle, 1047 &mpt3sas_phy->remote_identify); 1048 phy->identify.phy_identifier = mpt3sas_phy->phy_id; 1049 phy->negotiated_linkrate = _transport_convert_phy_link_rate( 1050 phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); 1051 phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( 1052 phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); 1053 phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( 1054 phy_pg0.HwLinkRate >> 4); 1055 phy->minimum_linkrate = _transport_convert_phy_link_rate( 1056 phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); 1057 phy->maximum_linkrate = _transport_convert_phy_link_rate( 1058 phy_pg0.ProgrammedLinkRate >> 4); 1059 phy->hostdata = mpt3sas_phy->port; 1060 1061 if ((sas_phy_add(phy))) { 1062 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1063 __FILE__, __LINE__, __func__); 1064 sas_phy_free(phy); 1065 return -1; 1066 } 1067 if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) 1068 dev_printk(KERN_INFO, &phy->dev, 1069 "add: handle(0x%04x), sas_addr(0x%016llx)\n" 1070 "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", 1071 mpt3sas_phy->handle, (unsigned long long) 1072 mpt3sas_phy->identify.sas_address, 1073 mpt3sas_phy->attached_handle, 1074 (unsigned long long) 1075 mpt3sas_phy->remote_identify.sas_address); 1076 mpt3sas_phy->phy = phy; 1077 return 0; 1078 } 1079 1080 1081 /** 1082 * mpt3sas_transport_add_expander_phy - report expander phy to transport 1083 * @ioc: per adapter object 1084 * @mpt3sas_phy: mpt3sas per phy object 1085 * @expander_pg1: expander page 1 1086 * @parent_dev: parent device class object 1087 * 1088 * Return: 0 for success, non-zero for failure. 1089 */ 1090 int 1091 mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy 1092 *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1, 1093 struct device *parent_dev) 1094 { 1095 struct sas_phy *phy; 1096 int phy_index = mpt3sas_phy->phy_id; 1097 1098 INIT_LIST_HEAD(&mpt3sas_phy->port_siblings); 1099 phy = sas_phy_alloc(parent_dev, phy_index); 1100 if (!phy) { 1101 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1102 __FILE__, __LINE__, __func__); 1103 return -1; 1104 } 1105 if ((_transport_set_identify(ioc, mpt3sas_phy->handle, 1106 &mpt3sas_phy->identify))) { 1107 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1108 __FILE__, __LINE__, __func__); 1109 sas_phy_free(phy); 1110 return -1; 1111 } 1112 phy->identify = mpt3sas_phy->identify; 1113 mpt3sas_phy->attached_handle = 1114 le16_to_cpu(expander_pg1.AttachedDevHandle); 1115 if (mpt3sas_phy->attached_handle) 1116 _transport_set_identify(ioc, mpt3sas_phy->attached_handle, 1117 &mpt3sas_phy->remote_identify); 1118 phy->identify.phy_identifier = mpt3sas_phy->phy_id; 1119 phy->negotiated_linkrate = _transport_convert_phy_link_rate( 1120 expander_pg1.NegotiatedLinkRate & 1121 MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); 1122 phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( 1123 expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); 1124 phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( 1125 expander_pg1.HwLinkRate >> 4); 1126 phy->minimum_linkrate = _transport_convert_phy_link_rate( 1127 expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); 1128 phy->maximum_linkrate = _transport_convert_phy_link_rate( 1129 expander_pg1.ProgrammedLinkRate >> 4); 1130 phy->hostdata = mpt3sas_phy->port; 1131 1132 if ((sas_phy_add(phy))) { 1133 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1134 __FILE__, __LINE__, __func__); 1135 sas_phy_free(phy); 1136 return -1; 1137 } 1138 if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) 1139 dev_printk(KERN_INFO, &phy->dev, 1140 "add: handle(0x%04x), sas_addr(0x%016llx)\n" 1141 "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", 1142 mpt3sas_phy->handle, (unsigned long long) 1143 mpt3sas_phy->identify.sas_address, 1144 mpt3sas_phy->attached_handle, 1145 (unsigned long long) 1146 mpt3sas_phy->remote_identify.sas_address); 1147 mpt3sas_phy->phy = phy; 1148 return 0; 1149 } 1150 1151 /** 1152 * mpt3sas_transport_update_links - refreshing phy link changes 1153 * @ioc: per adapter object 1154 * @sas_address: sas address of parent expander or sas host 1155 * @handle: attached device handle 1156 * @phy_number: phy number 1157 * @link_rate: new link rate 1158 * @port: hba port entry 1159 * 1160 * Return nothing. 1161 */ 1162 void 1163 mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, 1164 u64 sas_address, u16 handle, u8 phy_number, u8 link_rate, 1165 struct hba_port *port) 1166 { 1167 unsigned long flags; 1168 struct _sas_node *sas_node; 1169 struct _sas_phy *mpt3sas_phy; 1170 struct hba_port *hba_port = NULL; 1171 1172 if (ioc->shost_recovery || ioc->pci_error_recovery) 1173 return; 1174 1175 spin_lock_irqsave(&ioc->sas_node_lock, flags); 1176 sas_node = _transport_sas_node_find_by_sas_address(ioc, 1177 sas_address, port); 1178 if (!sas_node) { 1179 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1180 return; 1181 } 1182 1183 mpt3sas_phy = &sas_node->phy[phy_number]; 1184 mpt3sas_phy->attached_handle = handle; 1185 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1186 if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) { 1187 _transport_set_identify(ioc, handle, 1188 &mpt3sas_phy->remote_identify); 1189 if ((sas_node->handle <= ioc->sas_hba.num_phys) && 1190 (ioc->multipath_on_hba)) { 1191 list_for_each_entry(hba_port, 1192 &ioc->port_table_list, list) { 1193 if (hba_port->sas_address == sas_address && 1194 hba_port == port) 1195 hba_port->phy_mask |= 1196 (1 << mpt3sas_phy->phy_id); 1197 } 1198 } 1199 mpt3sas_transport_add_phy_to_an_existing_port(ioc, sas_node, 1200 mpt3sas_phy, mpt3sas_phy->remote_identify.sas_address, 1201 port); 1202 } else 1203 memset(&mpt3sas_phy->remote_identify, 0 , sizeof(struct 1204 sas_identify)); 1205 1206 if (mpt3sas_phy->phy) 1207 mpt3sas_phy->phy->negotiated_linkrate = 1208 _transport_convert_phy_link_rate(link_rate); 1209 1210 if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) 1211 dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, 1212 "refresh: parent sas_addr(0x%016llx),\n" 1213 "\tlink_rate(0x%02x), phy(%d)\n" 1214 "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", 1215 (unsigned long long)sas_address, 1216 link_rate, phy_number, handle, (unsigned long long) 1217 mpt3sas_phy->remote_identify.sas_address); 1218 } 1219 1220 static inline void * 1221 phy_to_ioc(struct sas_phy *phy) 1222 { 1223 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); 1224 return shost_priv(shost); 1225 } 1226 1227 static inline void * 1228 rphy_to_ioc(struct sas_rphy *rphy) 1229 { 1230 struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); 1231 return shost_priv(shost); 1232 } 1233 1234 /* report phy error log structure */ 1235 struct phy_error_log_request { 1236 u8 smp_frame_type; /* 0x40 */ 1237 u8 function; /* 0x11 */ 1238 u8 allocated_response_length; 1239 u8 request_length; /* 02 */ 1240 u8 reserved_1[5]; 1241 u8 phy_identifier; 1242 u8 reserved_2[2]; 1243 }; 1244 1245 /* report phy error log reply structure */ 1246 struct phy_error_log_reply { 1247 u8 smp_frame_type; /* 0x41 */ 1248 u8 function; /* 0x11 */ 1249 u8 function_result; 1250 u8 response_length; 1251 __be16 expander_change_count; 1252 u8 reserved_1[3]; 1253 u8 phy_identifier; 1254 u8 reserved_2[2]; 1255 __be32 invalid_dword; 1256 __be32 running_disparity_error; 1257 __be32 loss_of_dword_sync; 1258 __be32 phy_reset_problem; 1259 }; 1260 1261 /** 1262 * _transport_get_expander_phy_error_log - return expander counters 1263 * @ioc: per adapter object 1264 * @phy: The sas phy object 1265 * 1266 * Return: 0 for success, non-zero for failure. 1267 * 1268 */ 1269 static int 1270 _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc, 1271 struct sas_phy *phy) 1272 { 1273 Mpi2SmpPassthroughRequest_t *mpi_request; 1274 Mpi2SmpPassthroughReply_t *mpi_reply; 1275 struct phy_error_log_request *phy_error_log_request; 1276 struct phy_error_log_reply *phy_error_log_reply; 1277 int rc; 1278 u16 smid; 1279 void *psge; 1280 u8 issue_reset = 0; 1281 void *data_out = NULL; 1282 dma_addr_t data_out_dma; 1283 u32 sz; 1284 1285 if (ioc->shost_recovery || ioc->pci_error_recovery) { 1286 ioc_info(ioc, "%s: host reset in progress!\n", __func__); 1287 return -EFAULT; 1288 } 1289 1290 mutex_lock(&ioc->transport_cmds.mutex); 1291 1292 if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { 1293 ioc_err(ioc, "%s: transport_cmds in use\n", __func__); 1294 rc = -EAGAIN; 1295 goto out; 1296 } 1297 ioc->transport_cmds.status = MPT3_CMD_PENDING; 1298 1299 rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT); 1300 if (rc) 1301 goto out; 1302 1303 smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); 1304 if (!smid) { 1305 ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); 1306 rc = -EAGAIN; 1307 goto out; 1308 } 1309 1310 mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); 1311 ioc->transport_cmds.smid = smid; 1312 1313 sz = sizeof(struct phy_error_log_request) + 1314 sizeof(struct phy_error_log_reply); 1315 data_out = dma_alloc_coherent(&ioc->pdev->dev, sz, &data_out_dma, 1316 GFP_KERNEL); 1317 if (!data_out) { 1318 pr_err("failure at %s:%d/%s()!\n", __FILE__, 1319 __LINE__, __func__); 1320 rc = -ENOMEM; 1321 mpt3sas_base_free_smid(ioc, smid); 1322 goto out; 1323 } 1324 1325 rc = -EINVAL; 1326 memset(data_out, 0, sz); 1327 phy_error_log_request = data_out; 1328 phy_error_log_request->smp_frame_type = 0x40; 1329 phy_error_log_request->function = 0x11; 1330 phy_error_log_request->request_length = 2; 1331 phy_error_log_request->allocated_response_length = 0; 1332 phy_error_log_request->phy_identifier = phy->number; 1333 1334 memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); 1335 mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; 1336 mpi_request->PhysicalPort = _transport_get_port_id_by_sas_phy(phy); 1337 mpi_request->VF_ID = 0; /* TODO */ 1338 mpi_request->VP_ID = 0; 1339 mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); 1340 mpi_request->RequestDataLength = 1341 cpu_to_le16(sizeof(struct phy_error_log_request)); 1342 psge = &mpi_request->SGL; 1343 1344 ioc->build_sg(ioc, psge, data_out_dma, 1345 sizeof(struct phy_error_log_request), 1346 data_out_dma + sizeof(struct phy_error_log_request), 1347 sizeof(struct phy_error_log_reply)); 1348 1349 dtransportprintk(ioc, 1350 ioc_info(ioc, "phy_error_log - send to sas_addr(0x%016llx), phy(%d)\n", 1351 (u64)phy->identify.sas_address, 1352 phy->number)); 1353 init_completion(&ioc->transport_cmds.done); 1354 ioc->put_smid_default(ioc, smid); 1355 wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); 1356 1357 if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { 1358 ioc_err(ioc, "%s: timeout\n", __func__); 1359 _debug_dump_mf(mpi_request, 1360 sizeof(Mpi2SmpPassthroughRequest_t)/4); 1361 if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) 1362 issue_reset = 1; 1363 goto issue_host_reset; 1364 } 1365 1366 dtransportprintk(ioc, ioc_info(ioc, "phy_error_log - complete\n")); 1367 1368 if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { 1369 1370 mpi_reply = ioc->transport_cmds.reply; 1371 1372 dtransportprintk(ioc, 1373 ioc_info(ioc, "phy_error_log - reply data transfer size(%d)\n", 1374 le16_to_cpu(mpi_reply->ResponseDataLength))); 1375 1376 if (le16_to_cpu(mpi_reply->ResponseDataLength) != 1377 sizeof(struct phy_error_log_reply)) 1378 goto out; 1379 1380 phy_error_log_reply = data_out + 1381 sizeof(struct phy_error_log_request); 1382 1383 dtransportprintk(ioc, 1384 ioc_info(ioc, "phy_error_log - function_result(%d)\n", 1385 phy_error_log_reply->function_result)); 1386 1387 phy->invalid_dword_count = 1388 be32_to_cpu(phy_error_log_reply->invalid_dword); 1389 phy->running_disparity_error_count = 1390 be32_to_cpu(phy_error_log_reply->running_disparity_error); 1391 phy->loss_of_dword_sync_count = 1392 be32_to_cpu(phy_error_log_reply->loss_of_dword_sync); 1393 phy->phy_reset_problem_count = 1394 be32_to_cpu(phy_error_log_reply->phy_reset_problem); 1395 rc = 0; 1396 } else 1397 dtransportprintk(ioc, 1398 ioc_info(ioc, "phy_error_log - no reply\n")); 1399 1400 issue_host_reset: 1401 if (issue_reset) 1402 mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); 1403 out: 1404 ioc->transport_cmds.status = MPT3_CMD_NOT_USED; 1405 if (data_out) 1406 dma_free_coherent(&ioc->pdev->dev, sz, data_out, data_out_dma); 1407 1408 mutex_unlock(&ioc->transport_cmds.mutex); 1409 return rc; 1410 } 1411 1412 /** 1413 * _transport_get_linkerrors - return phy counters for both hba and expanders 1414 * @phy: The sas phy object 1415 * 1416 * Return: 0 for success, non-zero for failure. 1417 * 1418 */ 1419 static int 1420 _transport_get_linkerrors(struct sas_phy *phy) 1421 { 1422 struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); 1423 unsigned long flags; 1424 Mpi2ConfigReply_t mpi_reply; 1425 Mpi2SasPhyPage1_t phy_pg1; 1426 struct hba_port *port = phy->hostdata; 1427 int port_id = port->port_id; 1428 1429 spin_lock_irqsave(&ioc->sas_node_lock, flags); 1430 if (_transport_sas_node_find_by_sas_address(ioc, 1431 phy->identify.sas_address, 1432 mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { 1433 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1434 return -EINVAL; 1435 } 1436 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1437 1438 if (phy->identify.sas_address != ioc->sas_hba.sas_address) 1439 return _transport_get_expander_phy_error_log(ioc, phy); 1440 1441 /* get hba phy error logs */ 1442 if ((mpt3sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1, 1443 phy->number))) { 1444 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1445 __FILE__, __LINE__, __func__); 1446 return -ENXIO; 1447 } 1448 1449 if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) 1450 ioc_info(ioc, "phy(%d), ioc_status (0x%04x), loginfo(0x%08x)\n", 1451 phy->number, 1452 le16_to_cpu(mpi_reply.IOCStatus), 1453 le32_to_cpu(mpi_reply.IOCLogInfo)); 1454 1455 phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount); 1456 phy->running_disparity_error_count = 1457 le32_to_cpu(phy_pg1.RunningDisparityErrorCount); 1458 phy->loss_of_dword_sync_count = 1459 le32_to_cpu(phy_pg1.LossDwordSynchCount); 1460 phy->phy_reset_problem_count = 1461 le32_to_cpu(phy_pg1.PhyResetProblemCount); 1462 return 0; 1463 } 1464 1465 /** 1466 * _transport_get_enclosure_identifier - 1467 * @rphy: The sas phy object 1468 * @identifier: ? 1469 * 1470 * Obtain the enclosure logical id for an expander. 1471 * Return: 0 for success, non-zero for failure. 1472 */ 1473 static int 1474 _transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) 1475 { 1476 struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy); 1477 struct _sas_device *sas_device; 1478 unsigned long flags; 1479 int rc; 1480 1481 spin_lock_irqsave(&ioc->sas_device_lock, flags); 1482 sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy); 1483 if (sas_device) { 1484 *identifier = sas_device->enclosure_logical_id; 1485 rc = 0; 1486 sas_device_put(sas_device); 1487 } else { 1488 *identifier = 0; 1489 rc = -ENXIO; 1490 } 1491 1492 spin_unlock_irqrestore(&ioc->sas_device_lock, flags); 1493 return rc; 1494 } 1495 1496 /** 1497 * _transport_get_bay_identifier - 1498 * @rphy: The sas phy object 1499 * 1500 * Return: the slot id for a device that resides inside an enclosure. 1501 */ 1502 static int 1503 _transport_get_bay_identifier(struct sas_rphy *rphy) 1504 { 1505 struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy); 1506 struct _sas_device *sas_device; 1507 unsigned long flags; 1508 int rc; 1509 1510 spin_lock_irqsave(&ioc->sas_device_lock, flags); 1511 sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy); 1512 if (sas_device) { 1513 rc = sas_device->slot; 1514 sas_device_put(sas_device); 1515 } else { 1516 rc = -ENXIO; 1517 } 1518 spin_unlock_irqrestore(&ioc->sas_device_lock, flags); 1519 return rc; 1520 } 1521 1522 /* phy control request structure */ 1523 struct phy_control_request { 1524 u8 smp_frame_type; /* 0x40 */ 1525 u8 function; /* 0x91 */ 1526 u8 allocated_response_length; 1527 u8 request_length; /* 0x09 */ 1528 u16 expander_change_count; 1529 u8 reserved_1[3]; 1530 u8 phy_identifier; 1531 u8 phy_operation; 1532 u8 reserved_2[13]; 1533 u64 attached_device_name; 1534 u8 programmed_min_physical_link_rate; 1535 u8 programmed_max_physical_link_rate; 1536 u8 reserved_3[6]; 1537 }; 1538 1539 /* phy control reply structure */ 1540 struct phy_control_reply { 1541 u8 smp_frame_type; /* 0x41 */ 1542 u8 function; /* 0x11 */ 1543 u8 function_result; 1544 u8 response_length; 1545 }; 1546 1547 #define SMP_PHY_CONTROL_LINK_RESET (0x01) 1548 #define SMP_PHY_CONTROL_HARD_RESET (0x02) 1549 #define SMP_PHY_CONTROL_DISABLE (0x03) 1550 1551 /** 1552 * _transport_expander_phy_control - expander phy control 1553 * @ioc: per adapter object 1554 * @phy: The sas phy object 1555 * @phy_operation: ? 1556 * 1557 * Return: 0 for success, non-zero for failure. 1558 * 1559 */ 1560 static int 1561 _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc, 1562 struct sas_phy *phy, u8 phy_operation) 1563 { 1564 Mpi2SmpPassthroughRequest_t *mpi_request; 1565 Mpi2SmpPassthroughReply_t *mpi_reply; 1566 struct phy_control_request *phy_control_request; 1567 struct phy_control_reply *phy_control_reply; 1568 int rc; 1569 u16 smid; 1570 void *psge; 1571 u8 issue_reset = 0; 1572 void *data_out = NULL; 1573 dma_addr_t data_out_dma; 1574 u32 sz; 1575 1576 if (ioc->shost_recovery || ioc->pci_error_recovery) { 1577 ioc_info(ioc, "%s: host reset in progress!\n", __func__); 1578 return -EFAULT; 1579 } 1580 1581 mutex_lock(&ioc->transport_cmds.mutex); 1582 1583 if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { 1584 ioc_err(ioc, "%s: transport_cmds in use\n", __func__); 1585 rc = -EAGAIN; 1586 goto out; 1587 } 1588 ioc->transport_cmds.status = MPT3_CMD_PENDING; 1589 1590 rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT); 1591 if (rc) 1592 goto out; 1593 1594 smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); 1595 if (!smid) { 1596 ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); 1597 rc = -EAGAIN; 1598 goto out; 1599 } 1600 1601 mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); 1602 ioc->transport_cmds.smid = smid; 1603 1604 sz = sizeof(struct phy_control_request) + 1605 sizeof(struct phy_control_reply); 1606 data_out = dma_alloc_coherent(&ioc->pdev->dev, sz, &data_out_dma, 1607 GFP_KERNEL); 1608 if (!data_out) { 1609 pr_err("failure at %s:%d/%s()!\n", __FILE__, 1610 __LINE__, __func__); 1611 rc = -ENOMEM; 1612 mpt3sas_base_free_smid(ioc, smid); 1613 goto out; 1614 } 1615 1616 rc = -EINVAL; 1617 memset(data_out, 0, sz); 1618 phy_control_request = data_out; 1619 phy_control_request->smp_frame_type = 0x40; 1620 phy_control_request->function = 0x91; 1621 phy_control_request->request_length = 9; 1622 phy_control_request->allocated_response_length = 0; 1623 phy_control_request->phy_identifier = phy->number; 1624 phy_control_request->phy_operation = phy_operation; 1625 phy_control_request->programmed_min_physical_link_rate = 1626 phy->minimum_linkrate << 4; 1627 phy_control_request->programmed_max_physical_link_rate = 1628 phy->maximum_linkrate << 4; 1629 1630 memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); 1631 mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; 1632 mpi_request->PhysicalPort = _transport_get_port_id_by_sas_phy(phy); 1633 mpi_request->VF_ID = 0; /* TODO */ 1634 mpi_request->VP_ID = 0; 1635 mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); 1636 mpi_request->RequestDataLength = 1637 cpu_to_le16(sizeof(struct phy_error_log_request)); 1638 psge = &mpi_request->SGL; 1639 1640 ioc->build_sg(ioc, psge, data_out_dma, 1641 sizeof(struct phy_control_request), 1642 data_out_dma + sizeof(struct phy_control_request), 1643 sizeof(struct phy_control_reply)); 1644 1645 dtransportprintk(ioc, 1646 ioc_info(ioc, "phy_control - send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n", 1647 (u64)phy->identify.sas_address, 1648 phy->number, phy_operation)); 1649 init_completion(&ioc->transport_cmds.done); 1650 ioc->put_smid_default(ioc, smid); 1651 wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); 1652 1653 if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { 1654 ioc_err(ioc, "%s: timeout\n", __func__); 1655 _debug_dump_mf(mpi_request, 1656 sizeof(Mpi2SmpPassthroughRequest_t)/4); 1657 if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) 1658 issue_reset = 1; 1659 goto issue_host_reset; 1660 } 1661 1662 dtransportprintk(ioc, ioc_info(ioc, "phy_control - complete\n")); 1663 1664 if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { 1665 1666 mpi_reply = ioc->transport_cmds.reply; 1667 1668 dtransportprintk(ioc, 1669 ioc_info(ioc, "phy_control - reply data transfer size(%d)\n", 1670 le16_to_cpu(mpi_reply->ResponseDataLength))); 1671 1672 if (le16_to_cpu(mpi_reply->ResponseDataLength) != 1673 sizeof(struct phy_control_reply)) 1674 goto out; 1675 1676 phy_control_reply = data_out + 1677 sizeof(struct phy_control_request); 1678 1679 dtransportprintk(ioc, 1680 ioc_info(ioc, "phy_control - function_result(%d)\n", 1681 phy_control_reply->function_result)); 1682 1683 rc = 0; 1684 } else 1685 dtransportprintk(ioc, 1686 ioc_info(ioc, "phy_control - no reply\n")); 1687 1688 issue_host_reset: 1689 if (issue_reset) 1690 mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); 1691 out: 1692 ioc->transport_cmds.status = MPT3_CMD_NOT_USED; 1693 if (data_out) 1694 dma_free_coherent(&ioc->pdev->dev, sz, data_out, 1695 data_out_dma); 1696 1697 mutex_unlock(&ioc->transport_cmds.mutex); 1698 return rc; 1699 } 1700 1701 /** 1702 * _transport_phy_reset - 1703 * @phy: The sas phy object 1704 * @hard_reset: 1705 * 1706 * Return: 0 for success, non-zero for failure. 1707 */ 1708 static int 1709 _transport_phy_reset(struct sas_phy *phy, int hard_reset) 1710 { 1711 struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); 1712 Mpi2SasIoUnitControlReply_t mpi_reply; 1713 Mpi2SasIoUnitControlRequest_t mpi_request; 1714 struct hba_port *port = phy->hostdata; 1715 int port_id = port->port_id; 1716 unsigned long flags; 1717 1718 spin_lock_irqsave(&ioc->sas_node_lock, flags); 1719 if (_transport_sas_node_find_by_sas_address(ioc, 1720 phy->identify.sas_address, 1721 mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { 1722 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1723 return -EINVAL; 1724 } 1725 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1726 1727 /* handle expander phys */ 1728 if (phy->identify.sas_address != ioc->sas_hba.sas_address) 1729 return _transport_expander_phy_control(ioc, phy, 1730 (hard_reset == 1) ? SMP_PHY_CONTROL_HARD_RESET : 1731 SMP_PHY_CONTROL_LINK_RESET); 1732 1733 /* handle hba phys */ 1734 memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t)); 1735 mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; 1736 mpi_request.Operation = hard_reset ? 1737 MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET; 1738 mpi_request.PhyNum = phy->number; 1739 1740 if ((mpt3sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) { 1741 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1742 __FILE__, __LINE__, __func__); 1743 return -ENXIO; 1744 } 1745 1746 if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) 1747 ioc_info(ioc, "phy(%d), ioc_status(0x%04x), loginfo(0x%08x)\n", 1748 phy->number, le16_to_cpu(mpi_reply.IOCStatus), 1749 le32_to_cpu(mpi_reply.IOCLogInfo)); 1750 1751 return 0; 1752 } 1753 1754 /** 1755 * _transport_phy_enable - enable/disable phys 1756 * @phy: The sas phy object 1757 * @enable: enable phy when true 1758 * 1759 * Only support sas_host direct attached phys. 1760 * Return: 0 for success, non-zero for failure. 1761 */ 1762 static int 1763 _transport_phy_enable(struct sas_phy *phy, int enable) 1764 { 1765 struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); 1766 Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; 1767 Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; 1768 Mpi2ConfigReply_t mpi_reply; 1769 u16 ioc_status; 1770 u16 sz; 1771 int rc = 0; 1772 unsigned long flags; 1773 int i, discovery_active; 1774 struct hba_port *port = phy->hostdata; 1775 int port_id = port->port_id; 1776 1777 spin_lock_irqsave(&ioc->sas_node_lock, flags); 1778 if (_transport_sas_node_find_by_sas_address(ioc, 1779 phy->identify.sas_address, 1780 mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { 1781 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1782 return -EINVAL; 1783 } 1784 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1785 1786 /* handle expander phys */ 1787 if (phy->identify.sas_address != ioc->sas_hba.sas_address) 1788 return _transport_expander_phy_control(ioc, phy, 1789 (enable == 1) ? SMP_PHY_CONTROL_LINK_RESET : 1790 SMP_PHY_CONTROL_DISABLE); 1791 1792 /* handle hba phys */ 1793 1794 /* read sas_iounit page 0 */ 1795 sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * 1796 sizeof(Mpi2SasIOUnit0PhyData_t)); 1797 sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); 1798 if (!sas_iounit_pg0) { 1799 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1800 __FILE__, __LINE__, __func__); 1801 rc = -ENOMEM; 1802 goto out; 1803 } 1804 if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, 1805 sas_iounit_pg0, sz))) { 1806 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1807 __FILE__, __LINE__, __func__); 1808 rc = -ENXIO; 1809 goto out; 1810 } 1811 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & 1812 MPI2_IOCSTATUS_MASK; 1813 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { 1814 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1815 __FILE__, __LINE__, __func__); 1816 rc = -EIO; 1817 goto out; 1818 } 1819 1820 /* unable to enable/disable phys when when discovery is active */ 1821 for (i = 0, discovery_active = 0; i < ioc->sas_hba.num_phys ; i++) { 1822 if (sas_iounit_pg0->PhyData[i].PortFlags & 1823 MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS) { 1824 ioc_err(ioc, "discovery is active on port = %d, phy = %d: unable to enable/disable phys, try again later!\n", 1825 sas_iounit_pg0->PhyData[i].Port, i); 1826 discovery_active = 1; 1827 } 1828 } 1829 1830 if (discovery_active) { 1831 rc = -EAGAIN; 1832 goto out; 1833 } 1834 1835 /* read sas_iounit page 1 */ 1836 sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * 1837 sizeof(Mpi2SasIOUnit1PhyData_t)); 1838 sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); 1839 if (!sas_iounit_pg1) { 1840 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1841 __FILE__, __LINE__, __func__); 1842 rc = -ENOMEM; 1843 goto out; 1844 } 1845 if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, 1846 sas_iounit_pg1, sz))) { 1847 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1848 __FILE__, __LINE__, __func__); 1849 rc = -ENXIO; 1850 goto out; 1851 } 1852 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & 1853 MPI2_IOCSTATUS_MASK; 1854 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { 1855 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1856 __FILE__, __LINE__, __func__); 1857 rc = -EIO; 1858 goto out; 1859 } 1860 1861 /* copy Port/PortFlags/PhyFlags from page 0 */ 1862 for (i = 0; i < ioc->sas_hba.num_phys ; i++) { 1863 sas_iounit_pg1->PhyData[i].Port = 1864 sas_iounit_pg0->PhyData[i].Port; 1865 sas_iounit_pg1->PhyData[i].PortFlags = 1866 (sas_iounit_pg0->PhyData[i].PortFlags & 1867 MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG); 1868 sas_iounit_pg1->PhyData[i].PhyFlags = 1869 (sas_iounit_pg0->PhyData[i].PhyFlags & 1870 (MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED + 1871 MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED)); 1872 } 1873 1874 if (enable) 1875 sas_iounit_pg1->PhyData[phy->number].PhyFlags 1876 &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; 1877 else 1878 sas_iounit_pg1->PhyData[phy->number].PhyFlags 1879 |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; 1880 1881 mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz); 1882 1883 /* link reset */ 1884 if (enable) 1885 _transport_phy_reset(phy, 0); 1886 1887 out: 1888 kfree(sas_iounit_pg1); 1889 kfree(sas_iounit_pg0); 1890 return rc; 1891 } 1892 1893 /** 1894 * _transport_phy_speed - set phy min/max link rates 1895 * @phy: The sas phy object 1896 * @rates: rates defined in sas_phy_linkrates 1897 * 1898 * Only support sas_host direct attached phys. 1899 * 1900 * Return: 0 for success, non-zero for failure. 1901 */ 1902 static int 1903 _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) 1904 { 1905 struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); 1906 Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; 1907 Mpi2SasPhyPage0_t phy_pg0; 1908 Mpi2ConfigReply_t mpi_reply; 1909 u16 ioc_status; 1910 u16 sz; 1911 int i; 1912 int rc = 0; 1913 unsigned long flags; 1914 struct hba_port *port = phy->hostdata; 1915 int port_id = port->port_id; 1916 1917 spin_lock_irqsave(&ioc->sas_node_lock, flags); 1918 if (_transport_sas_node_find_by_sas_address(ioc, 1919 phy->identify.sas_address, 1920 mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { 1921 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1922 return -EINVAL; 1923 } 1924 spin_unlock_irqrestore(&ioc->sas_node_lock, flags); 1925 1926 if (!rates->minimum_linkrate) 1927 rates->minimum_linkrate = phy->minimum_linkrate; 1928 else if (rates->minimum_linkrate < phy->minimum_linkrate_hw) 1929 rates->minimum_linkrate = phy->minimum_linkrate_hw; 1930 1931 if (!rates->maximum_linkrate) 1932 rates->maximum_linkrate = phy->maximum_linkrate; 1933 else if (rates->maximum_linkrate > phy->maximum_linkrate_hw) 1934 rates->maximum_linkrate = phy->maximum_linkrate_hw; 1935 1936 /* handle expander phys */ 1937 if (phy->identify.sas_address != ioc->sas_hba.sas_address) { 1938 phy->minimum_linkrate = rates->minimum_linkrate; 1939 phy->maximum_linkrate = rates->maximum_linkrate; 1940 return _transport_expander_phy_control(ioc, phy, 1941 SMP_PHY_CONTROL_LINK_RESET); 1942 } 1943 1944 /* handle hba phys */ 1945 1946 /* sas_iounit page 1 */ 1947 sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * 1948 sizeof(Mpi2SasIOUnit1PhyData_t)); 1949 sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); 1950 if (!sas_iounit_pg1) { 1951 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1952 __FILE__, __LINE__, __func__); 1953 rc = -ENOMEM; 1954 goto out; 1955 } 1956 if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, 1957 sas_iounit_pg1, sz))) { 1958 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1959 __FILE__, __LINE__, __func__); 1960 rc = -ENXIO; 1961 goto out; 1962 } 1963 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & 1964 MPI2_IOCSTATUS_MASK; 1965 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { 1966 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1967 __FILE__, __LINE__, __func__); 1968 rc = -EIO; 1969 goto out; 1970 } 1971 1972 for (i = 0; i < ioc->sas_hba.num_phys; i++) { 1973 if (phy->number != i) { 1974 sas_iounit_pg1->PhyData[i].MaxMinLinkRate = 1975 (ioc->sas_hba.phy[i].phy->minimum_linkrate + 1976 (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4)); 1977 } else { 1978 sas_iounit_pg1->PhyData[i].MaxMinLinkRate = 1979 (rates->minimum_linkrate + 1980 (rates->maximum_linkrate << 4)); 1981 } 1982 } 1983 1984 if (mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, 1985 sz)) { 1986 ioc_err(ioc, "failure at %s:%d/%s()!\n", 1987 __FILE__, __LINE__, __func__); 1988 rc = -ENXIO; 1989 goto out; 1990 } 1991 1992 /* link reset */ 1993 _transport_phy_reset(phy, 0); 1994 1995 /* read phy page 0, then update the rates in the sas transport phy */ 1996 if (!mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, 1997 phy->number)) { 1998 phy->minimum_linkrate = _transport_convert_phy_link_rate( 1999 phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); 2000 phy->maximum_linkrate = _transport_convert_phy_link_rate( 2001 phy_pg0.ProgrammedLinkRate >> 4); 2002 phy->negotiated_linkrate = _transport_convert_phy_link_rate( 2003 phy_pg0.NegotiatedLinkRate & 2004 MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); 2005 } 2006 2007 out: 2008 kfree(sas_iounit_pg1); 2009 return rc; 2010 } 2011 2012 static int 2013 _transport_map_smp_buffer(struct device *dev, struct bsg_buffer *buf, 2014 dma_addr_t *dma_addr, size_t *dma_len, void **p) 2015 { 2016 /* Check if the request is split across multiple segments */ 2017 if (buf->sg_cnt > 1) { 2018 *p = dma_alloc_coherent(dev, buf->payload_len, dma_addr, 2019 GFP_KERNEL); 2020 if (!*p) 2021 return -ENOMEM; 2022 *dma_len = buf->payload_len; 2023 } else { 2024 if (!dma_map_sg(dev, buf->sg_list, 1, DMA_BIDIRECTIONAL)) 2025 return -ENOMEM; 2026 *dma_addr = sg_dma_address(buf->sg_list); 2027 *dma_len = sg_dma_len(buf->sg_list); 2028 *p = NULL; 2029 } 2030 2031 return 0; 2032 } 2033 2034 static void 2035 _transport_unmap_smp_buffer(struct device *dev, struct bsg_buffer *buf, 2036 dma_addr_t dma_addr, void *p) 2037 { 2038 if (p) 2039 dma_free_coherent(dev, buf->payload_len, p, dma_addr); 2040 else 2041 dma_unmap_sg(dev, buf->sg_list, 1, DMA_BIDIRECTIONAL); 2042 } 2043 2044 /** 2045 * _transport_smp_handler - transport portal for smp passthru 2046 * @job: ? 2047 * @shost: shost object 2048 * @rphy: sas transport rphy object 2049 * 2050 * This used primarily for smp_utils. 2051 * Example: 2052 * smp_rep_general /sys/class/bsg/expander-5:0 2053 */ 2054 static void 2055 _transport_smp_handler(struct bsg_job *job, struct Scsi_Host *shost, 2056 struct sas_rphy *rphy) 2057 { 2058 struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); 2059 Mpi2SmpPassthroughRequest_t *mpi_request; 2060 Mpi2SmpPassthroughReply_t *mpi_reply; 2061 int rc; 2062 u16 smid; 2063 void *psge; 2064 dma_addr_t dma_addr_in; 2065 dma_addr_t dma_addr_out; 2066 void *addr_in = NULL; 2067 void *addr_out = NULL; 2068 size_t dma_len_in; 2069 size_t dma_len_out; 2070 unsigned int reslen = 0; 2071 2072 if (ioc->shost_recovery || ioc->pci_error_recovery) { 2073 ioc_info(ioc, "%s: host reset in progress!\n", __func__); 2074 rc = -EFAULT; 2075 goto job_done; 2076 } 2077 2078 rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex); 2079 if (rc) 2080 goto job_done; 2081 2082 if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { 2083 ioc_err(ioc, "%s: transport_cmds in use\n", 2084 __func__); 2085 rc = -EAGAIN; 2086 goto out; 2087 } 2088 ioc->transport_cmds.status = MPT3_CMD_PENDING; 2089 2090 rc = _transport_map_smp_buffer(&ioc->pdev->dev, &job->request_payload, 2091 &dma_addr_out, &dma_len_out, &addr_out); 2092 if (rc) 2093 goto out; 2094 if (addr_out) { 2095 sg_copy_to_buffer(job->request_payload.sg_list, 2096 job->request_payload.sg_cnt, addr_out, 2097 job->request_payload.payload_len); 2098 } 2099 2100 rc = _transport_map_smp_buffer(&ioc->pdev->dev, &job->reply_payload, 2101 &dma_addr_in, &dma_len_in, &addr_in); 2102 if (rc) 2103 goto unmap_out; 2104 2105 rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT); 2106 if (rc) 2107 goto unmap_in; 2108 2109 smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); 2110 if (!smid) { 2111 ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); 2112 rc = -EAGAIN; 2113 goto unmap_in; 2114 } 2115 2116 rc = 0; 2117 mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); 2118 ioc->transport_cmds.smid = smid; 2119 2120 memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); 2121 mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; 2122 mpi_request->PhysicalPort = _transport_get_port_id_by_rphy(ioc, rphy); 2123 mpi_request->SASAddress = (rphy) ? 2124 cpu_to_le64(rphy->identify.sas_address) : 2125 cpu_to_le64(ioc->sas_hba.sas_address); 2126 mpi_request->RequestDataLength = cpu_to_le16(dma_len_out - 4); 2127 psge = &mpi_request->SGL; 2128 2129 ioc->build_sg(ioc, psge, dma_addr_out, dma_len_out - 4, dma_addr_in, 2130 dma_len_in - 4); 2131 2132 dtransportprintk(ioc, 2133 ioc_info(ioc, "%s: sending smp request\n", __func__)); 2134 2135 init_completion(&ioc->transport_cmds.done); 2136 ioc->put_smid_default(ioc, smid); 2137 wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); 2138 2139 if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { 2140 ioc_err(ioc, "%s: timeout\n", __func__); 2141 _debug_dump_mf(mpi_request, 2142 sizeof(Mpi2SmpPassthroughRequest_t)/4); 2143 if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) { 2144 mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); 2145 rc = -ETIMEDOUT; 2146 goto unmap_in; 2147 } 2148 } 2149 2150 dtransportprintk(ioc, ioc_info(ioc, "%s - complete\n", __func__)); 2151 2152 if (!(ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID)) { 2153 dtransportprintk(ioc, 2154 ioc_info(ioc, "%s: no reply\n", __func__)); 2155 rc = -ENXIO; 2156 goto unmap_in; 2157 } 2158 2159 mpi_reply = ioc->transport_cmds.reply; 2160 2161 dtransportprintk(ioc, 2162 ioc_info(ioc, "%s: reply data transfer size(%d)\n", 2163 __func__, 2164 le16_to_cpu(mpi_reply->ResponseDataLength))); 2165 2166 memcpy(job->reply, mpi_reply, sizeof(*mpi_reply)); 2167 job->reply_len = sizeof(*mpi_reply); 2168 reslen = le16_to_cpu(mpi_reply->ResponseDataLength); 2169 2170 if (addr_in) { 2171 sg_copy_to_buffer(job->reply_payload.sg_list, 2172 job->reply_payload.sg_cnt, addr_in, 2173 job->reply_payload.payload_len); 2174 } 2175 2176 rc = 0; 2177 unmap_in: 2178 _transport_unmap_smp_buffer(&ioc->pdev->dev, &job->reply_payload, 2179 dma_addr_in, addr_in); 2180 unmap_out: 2181 _transport_unmap_smp_buffer(&ioc->pdev->dev, &job->request_payload, 2182 dma_addr_out, addr_out); 2183 out: 2184 ioc->transport_cmds.status = MPT3_CMD_NOT_USED; 2185 mutex_unlock(&ioc->transport_cmds.mutex); 2186 job_done: 2187 bsg_job_done(job, rc, reslen); 2188 } 2189 2190 struct sas_function_template mpt3sas_transport_functions = { 2191 .get_linkerrors = _transport_get_linkerrors, 2192 .get_enclosure_identifier = _transport_get_enclosure_identifier, 2193 .get_bay_identifier = _transport_get_bay_identifier, 2194 .phy_reset = _transport_phy_reset, 2195 .phy_enable = _transport_phy_enable, 2196 .set_phy_speed = _transport_phy_speed, 2197 .smp_handler = _transport_smp_handler, 2198 }; 2199 2200 struct scsi_transport_template *mpt3sas_transport_template; 2201