1 /* 2 * This is the Fusion MPT base driver providing common API layer interface 3 * for access to MPT (Message Passing Technology) firmware. 4 * 5 * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h 6 * Copyright (C) 2012-2014 LSI Corporation 7 * Copyright (C) 2013-2014 Avago Technologies 8 * (mailto: MPT-FusionLinux.pdl@avagotech.com) 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License 12 * as published by the Free Software Foundation; either version 2 13 * of the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * NO WARRANTY 21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 25 * solely responsible for determining the appropriateness of using and 26 * distributing the Program and assumes all risks associated with its 27 * exercise of rights under this Agreement, including but not limited to 28 * the risks and costs of program errors, damage to or loss of data, 29 * programs or equipment, and unavailability or interruption of operations. 30 31 * DISCLAIMER OF LIABILITY 32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 39 40 * You should have received a copy of the GNU General Public License 41 * along with this program; if not, write to the Free Software 42 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 43 * USA. 44 */ 45 46 #ifndef MPT3SAS_BASE_H_INCLUDED 47 #define MPT3SAS_BASE_H_INCLUDED 48 49 #include "mpi/mpi2_type.h" 50 #include "mpi/mpi2.h" 51 #include "mpi/mpi2_ioc.h" 52 #include "mpi/mpi2_cnfg.h" 53 #include "mpi/mpi2_init.h" 54 #include "mpi/mpi2_raid.h" 55 #include "mpi/mpi2_tool.h" 56 #include "mpi/mpi2_sas.h" 57 58 #include <scsi/scsi.h> 59 #include <scsi/scsi_cmnd.h> 60 #include <scsi/scsi_device.h> 61 #include <scsi/scsi_host.h> 62 #include <scsi/scsi_tcq.h> 63 #include <scsi/scsi_transport_sas.h> 64 #include <scsi/scsi_dbg.h> 65 #include <scsi/scsi_eh.h> 66 #include <linux/pci.h> 67 #include <linux/poll.h> 68 69 #include "mpt3sas_debug.h" 70 #include "mpt3sas_trigger_diag.h" 71 72 /* driver versioning info */ 73 #define MPT3SAS_DRIVER_NAME "mpt3sas" 74 #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>" 75 #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" 76 #define MPT3SAS_DRIVER_VERSION "13.100.00.00" 77 #define MPT3SAS_MAJOR_VERSION 13 78 #define MPT3SAS_MINOR_VERSION 100 79 #define MPT3SAS_BUILD_VERSION 0 80 #define MPT3SAS_RELEASE_VERSION 00 81 82 #define MPT2SAS_DRIVER_NAME "mpt2sas" 83 #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" 84 #define MPT2SAS_DRIVER_VERSION "20.102.00.00" 85 #define MPT2SAS_MAJOR_VERSION 20 86 #define MPT2SAS_MINOR_VERSION 102 87 #define MPT2SAS_BUILD_VERSION 0 88 #define MPT2SAS_RELEASE_VERSION 00 89 90 /* 91 * Set MPT3SAS_SG_DEPTH value based on user input. 92 */ 93 #define MPT_MAX_PHYS_SEGMENTS SG_CHUNK_SIZE 94 #define MPT_MIN_PHYS_SEGMENTS 16 95 96 #ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE 97 #define MPT3SAS_SG_DEPTH CONFIG_SCSI_MPT3SAS_MAX_SGE 98 #else 99 #define MPT3SAS_SG_DEPTH MPT_MAX_PHYS_SEGMENTS 100 #endif 101 102 #ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE 103 #define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE 104 #else 105 #define MPT2SAS_SG_DEPTH MPT_MAX_PHYS_SEGMENTS 106 #endif 107 108 /* 109 * Generic Defines 110 */ 111 #define MPT3SAS_SATA_QUEUE_DEPTH 32 112 #define MPT3SAS_SAS_QUEUE_DEPTH 254 113 #define MPT3SAS_RAID_QUEUE_DEPTH 128 114 115 #define MPT3SAS_RAID_MAX_SECTORS 8192 116 117 #define MPT_NAME_LENGTH 32 /* generic length of strings */ 118 #define MPT_STRING_LENGTH 64 119 120 #define MPT_MAX_CALLBACKS 32 121 122 123 #define CAN_SLEEP 1 124 #define NO_SLEEP 0 125 126 #define INTERNAL_CMDS_COUNT 10 /* reserved cmds */ 127 /* reserved for issuing internally framed scsi io cmds */ 128 #define INTERNAL_SCSIIO_CMDS_COUNT 3 129 130 #define MPI3_HIM_MASK 0xFFFFFFFF /* mask every bit*/ 131 132 #define MPT3SAS_INVALID_DEVICE_HANDLE 0xFFFF 133 134 #define MAX_CHAIN_ELEMT_SZ 16 135 #define DEFAULT_NUM_FWCHAIN_ELEMTS 8 136 137 /* 138 * reset phases 139 */ 140 #define MPT3_IOC_PRE_RESET 1 /* prior to host reset */ 141 #define MPT3_IOC_AFTER_RESET 2 /* just after host reset */ 142 #define MPT3_IOC_DONE_RESET 3 /* links re-initialized */ 143 144 /* 145 * logging format 146 */ 147 #define MPT3SAS_FMT "%s: " 148 149 /* 150 * WarpDrive Specific Log codes 151 */ 152 153 #define MPT2_WARPDRIVE_LOGENTRY (0x8002) 154 #define MPT2_WARPDRIVE_LC_SSDT (0x41) 155 #define MPT2_WARPDRIVE_LC_SSDLW (0x43) 156 #define MPT2_WARPDRIVE_LC_SSDLF (0x44) 157 #define MPT2_WARPDRIVE_LC_BRMF (0x4D) 158 159 /* 160 * per target private data 161 */ 162 #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 163 #define MPT_TARGET_FLAGS_VOLUME 0x02 164 #define MPT_TARGET_FLAGS_DELETED 0x04 165 #define MPT_TARGET_FASTPATH_IO 0x08 166 167 #define SAS2_PCI_DEVICE_B0_REVISION (0x01) 168 #define SAS3_PCI_DEVICE_C0_REVISION (0x02) 169 170 /* 171 * Intel HBA branding 172 */ 173 #define MPT2SAS_INTEL_RMS25JB080_BRANDING \ 174 "Intel(R) Integrated RAID Module RMS25JB080" 175 #define MPT2SAS_INTEL_RMS25JB040_BRANDING \ 176 "Intel(R) Integrated RAID Module RMS25JB040" 177 #define MPT2SAS_INTEL_RMS25KB080_BRANDING \ 178 "Intel(R) Integrated RAID Module RMS25KB080" 179 #define MPT2SAS_INTEL_RMS25KB040_BRANDING \ 180 "Intel(R) Integrated RAID Module RMS25KB040" 181 #define MPT2SAS_INTEL_RMS25LB040_BRANDING \ 182 "Intel(R) Integrated RAID Module RMS25LB040" 183 #define MPT2SAS_INTEL_RMS25LB080_BRANDING \ 184 "Intel(R) Integrated RAID Module RMS25LB080" 185 #define MPT2SAS_INTEL_RMS2LL080_BRANDING \ 186 "Intel Integrated RAID Module RMS2LL080" 187 #define MPT2SAS_INTEL_RMS2LL040_BRANDING \ 188 "Intel Integrated RAID Module RMS2LL040" 189 #define MPT2SAS_INTEL_RS25GB008_BRANDING \ 190 "Intel(R) RAID Controller RS25GB008" 191 #define MPT2SAS_INTEL_SSD910_BRANDING \ 192 "Intel(R) SSD 910 Series" 193 194 #define MPT3SAS_INTEL_RMS3JC080_BRANDING \ 195 "Intel(R) Integrated RAID Module RMS3JC080" 196 #define MPT3SAS_INTEL_RS3GC008_BRANDING \ 197 "Intel(R) RAID Controller RS3GC008" 198 #define MPT3SAS_INTEL_RS3FC044_BRANDING \ 199 "Intel(R) RAID Controller RS3FC044" 200 #define MPT3SAS_INTEL_RS3UC080_BRANDING \ 201 "Intel(R) RAID Controller RS3UC080" 202 203 /* 204 * Intel HBA SSDIDs 205 */ 206 #define MPT2SAS_INTEL_RMS25JB080_SSDID 0x3516 207 #define MPT2SAS_INTEL_RMS25JB040_SSDID 0x3517 208 #define MPT2SAS_INTEL_RMS25KB080_SSDID 0x3518 209 #define MPT2SAS_INTEL_RMS25KB040_SSDID 0x3519 210 #define MPT2SAS_INTEL_RMS25LB040_SSDID 0x351A 211 #define MPT2SAS_INTEL_RMS25LB080_SSDID 0x351B 212 #define MPT2SAS_INTEL_RMS2LL080_SSDID 0x350E 213 #define MPT2SAS_INTEL_RMS2LL040_SSDID 0x350F 214 #define MPT2SAS_INTEL_RS25GB008_SSDID 0x3000 215 #define MPT2SAS_INTEL_SSD910_SSDID 0x3700 216 217 #define MPT3SAS_INTEL_RMS3JC080_SSDID 0x3521 218 #define MPT3SAS_INTEL_RS3GC008_SSDID 0x3522 219 #define MPT3SAS_INTEL_RS3FC044_SSDID 0x3523 220 #define MPT3SAS_INTEL_RS3UC080_SSDID 0x3524 221 222 /* 223 * Dell HBA branding 224 */ 225 #define MPT2SAS_DELL_BRANDING_SIZE 32 226 227 #define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA" 228 #define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter" 229 #define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated" 230 #define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular" 231 #define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded" 232 #define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200" 233 #define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS" 234 235 #define MPT3SAS_DELL_12G_HBA_BRANDING \ 236 "Dell 12Gbps HBA" 237 238 /* 239 * Dell HBA SSDIDs 240 */ 241 #define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C 242 #define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D 243 #define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E 244 #define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F 245 #define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20 246 #define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21 247 #define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22 248 249 #define MPT3SAS_DELL_12G_HBA_SSDID 0x1F46 250 251 /* 252 * Cisco HBA branding 253 */ 254 #define MPT3SAS_CISCO_12G_8E_HBA_BRANDING \ 255 "Cisco 9300-8E 12G SAS HBA" 256 #define MPT3SAS_CISCO_12G_8I_HBA_BRANDING \ 257 "Cisco 9300-8i 12G SAS HBA" 258 #define MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING \ 259 "Cisco 12G Modular SAS Pass through Controller" 260 #define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING \ 261 "UCS C3X60 12G SAS Pass through Controller" 262 /* 263 * Cisco HBA SSSDIDs 264 */ 265 #define MPT3SAS_CISCO_12G_8E_HBA_SSDID 0x14C 266 #define MPT3SAS_CISCO_12G_8I_HBA_SSDID 0x154 267 #define MPT3SAS_CISCO_12G_AVILA_HBA_SSDID 0x155 268 #define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID 0x156 269 270 /* 271 * status bits for ioc->diag_buffer_status 272 */ 273 #define MPT3_DIAG_BUFFER_IS_REGISTERED (0x01) 274 #define MPT3_DIAG_BUFFER_IS_RELEASED (0x02) 275 #define MPT3_DIAG_BUFFER_IS_DIAG_RESET (0x04) 276 277 /* 278 * HP HBA branding 279 */ 280 #define MPT2SAS_HP_3PAR_SSVID 0x1590 281 282 #define MPT2SAS_HP_2_4_INTERNAL_BRANDING \ 283 "HP H220 Host Bus Adapter" 284 #define MPT2SAS_HP_2_4_EXTERNAL_BRANDING \ 285 "HP H221 Host Bus Adapter" 286 #define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING \ 287 "HP H222 Host Bus Adapter" 288 #define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING \ 289 "HP H220i Host Bus Adapter" 290 #define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING \ 291 "HP H210i Host Bus Adapter" 292 293 /* 294 * HO HBA SSDIDs 295 */ 296 #define MPT2SAS_HP_2_4_INTERNAL_SSDID 0x0041 297 #define MPT2SAS_HP_2_4_EXTERNAL_SSDID 0x0042 298 #define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID 0x0043 299 #define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID 0x0044 300 #define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID 0x0046 301 302 /* 303 * Combined Reply Queue constants, 304 * There are twelve Supplemental Reply Post Host Index Registers 305 * and each register is at offset 0x10 bytes from the previous one. 306 */ 307 #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT 12 308 #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET (0x10) 309 310 /* OEM Identifiers */ 311 #define MFG10_OEM_ID_INVALID (0x00000000) 312 #define MFG10_OEM_ID_DELL (0x00000001) 313 #define MFG10_OEM_ID_FSC (0x00000002) 314 #define MFG10_OEM_ID_SUN (0x00000003) 315 #define MFG10_OEM_ID_IBM (0x00000004) 316 317 /* GENERIC Flags 0*/ 318 #define MFG10_GF0_OCE_DISABLED (0x00000001) 319 #define MFG10_GF0_R1E_DRIVE_COUNT (0x00000002) 320 #define MFG10_GF0_R10_DISPLAY (0x00000004) 321 #define MFG10_GF0_SSD_DATA_SCRUB_DISABLE (0x00000008) 322 #define MFG10_GF0_SINGLE_DRIVE_R0 (0x00000010) 323 324 #define VIRTUAL_IO_FAILED_RETRY (0x32010081) 325 326 /* OEM Specific Flags will come from OEM specific header files */ 327 struct Mpi2ManufacturingPage10_t { 328 MPI2_CONFIG_PAGE_HEADER Header; /* 00h */ 329 U8 OEMIdentifier; /* 04h */ 330 U8 Reserved1; /* 05h */ 331 U16 Reserved2; /* 08h */ 332 U32 Reserved3; /* 0Ch */ 333 U32 GenericFlags0; /* 10h */ 334 U32 GenericFlags1; /* 14h */ 335 U32 Reserved4; /* 18h */ 336 U32 OEMSpecificFlags0; /* 1Ch */ 337 U32 OEMSpecificFlags1; /* 20h */ 338 U32 Reserved5[18]; /* 24h - 60h*/ 339 }; 340 341 342 /* Miscellaneous options */ 343 struct Mpi2ManufacturingPage11_t { 344 MPI2_CONFIG_PAGE_HEADER Header; /* 00h */ 345 __le32 Reserved1; /* 04h */ 346 u8 Reserved2; /* 08h */ 347 u8 EEDPTagMode; /* 09h */ 348 u8 Reserved3; /* 0Ah */ 349 u8 Reserved4; /* 0Bh */ 350 __le32 Reserved5[23]; /* 0Ch-60h*/ 351 }; 352 353 /** 354 * struct MPT3SAS_TARGET - starget private hostdata 355 * @starget: starget object 356 * @sas_address: target sas address 357 * @raid_device: raid_device pointer to access volume data 358 * @handle: device handle 359 * @num_luns: number luns 360 * @flags: MPT_TARGET_FLAGS_XXX flags 361 * @deleted: target flaged for deletion 362 * @tm_busy: target is busy with TM request. 363 * @sdev: The sas_device associated with this target 364 */ 365 struct MPT3SAS_TARGET { 366 struct scsi_target *starget; 367 u64 sas_address; 368 struct _raid_device *raid_device; 369 u16 handle; 370 int num_luns; 371 u32 flags; 372 u8 deleted; 373 u8 tm_busy; 374 struct _sas_device *sdev; 375 }; 376 377 378 /* 379 * per device private data 380 */ 381 #define MPT_DEVICE_FLAGS_INIT 0x01 382 #define MPT_DEVICE_TLR_ON 0x02 383 384 #define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003) 385 #define MFG_PAGE10_HIDE_ALL_DISKS (0x00) 386 #define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01) 387 #define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02) 388 389 /** 390 * struct MPT3SAS_DEVICE - sdev private hostdata 391 * @sas_target: starget private hostdata 392 * @lun: lun number 393 * @flags: MPT_DEVICE_XXX flags 394 * @configured_lun: lun is configured 395 * @block: device is in SDEV_BLOCK state 396 * @tlr_snoop_check: flag used in determining whether to disable TLR 397 * @eedp_enable: eedp support enable bit 398 * @eedp_type: 0(type_1), 1(type_2), 2(type_3) 399 * @eedp_block_length: block size 400 */ 401 struct MPT3SAS_DEVICE { 402 struct MPT3SAS_TARGET *sas_target; 403 unsigned int lun; 404 u32 flags; 405 u8 configured_lun; 406 u8 block; 407 u8 tlr_snoop_check; 408 u8 ignore_delay_remove; 409 }; 410 411 #define MPT3_CMD_NOT_USED 0x8000 /* free */ 412 #define MPT3_CMD_COMPLETE 0x0001 /* completed */ 413 #define MPT3_CMD_PENDING 0x0002 /* pending */ 414 #define MPT3_CMD_REPLY_VALID 0x0004 /* reply is valid */ 415 #define MPT3_CMD_RESET 0x0008 /* host reset dropped the command */ 416 417 /** 418 * struct _internal_cmd - internal commands struct 419 * @mutex: mutex 420 * @done: completion 421 * @reply: reply message pointer 422 * @sense: sense data 423 * @status: MPT3_CMD_XXX status 424 * @smid: system message id 425 */ 426 struct _internal_cmd { 427 struct mutex mutex; 428 struct completion done; 429 void *reply; 430 void *sense; 431 u16 status; 432 u16 smid; 433 }; 434 435 436 437 /** 438 * struct _sas_device - attached device information 439 * @list: sas device list 440 * @starget: starget object 441 * @sas_address: device sas address 442 * @device_name: retrieved from the SAS IDENTIFY frame. 443 * @handle: device handle 444 * @sas_address_parent: sas address of parent expander or sas host 445 * @enclosure_handle: enclosure handle 446 * @enclosure_logical_id: enclosure logical identifier 447 * @volume_handle: volume handle (valid when hidden raid member) 448 * @volume_wwid: volume unique identifier 449 * @device_info: bitfield provides detailed info about the device 450 * @id: target id 451 * @channel: target channel 452 * @slot: number number 453 * @phy: phy identifier provided in sas device page 0 454 * @responding: used in _scsih_sas_device_mark_responding 455 * @fast_path: fast path feature enable bit 456 * @pfa_led_on: flag for PFA LED status 457 * @pend_sas_rphy_add: flag to check if device is in sas_rphy_add() 458 * addition routine. 459 */ 460 struct _sas_device { 461 struct list_head list; 462 struct scsi_target *starget; 463 u64 sas_address; 464 u64 device_name; 465 u16 handle; 466 u64 sas_address_parent; 467 u16 enclosure_handle; 468 u64 enclosure_logical_id; 469 u16 volume_handle; 470 u64 volume_wwid; 471 u32 device_info; 472 int id; 473 int channel; 474 u16 slot; 475 u8 phy; 476 u8 responding; 477 u8 fast_path; 478 u8 pfa_led_on; 479 u8 pend_sas_rphy_add; 480 u8 enclosure_level; 481 u8 connector_name[4]; 482 struct kref refcount; 483 }; 484 485 static inline void sas_device_get(struct _sas_device *s) 486 { 487 kref_get(&s->refcount); 488 } 489 490 static inline void sas_device_free(struct kref *r) 491 { 492 kfree(container_of(r, struct _sas_device, refcount)); 493 } 494 495 static inline void sas_device_put(struct _sas_device *s) 496 { 497 kref_put(&s->refcount, sas_device_free); 498 } 499 500 /** 501 * struct _raid_device - raid volume link list 502 * @list: sas device list 503 * @starget: starget object 504 * @sdev: scsi device struct (volumes are single lun) 505 * @wwid: unique identifier for the volume 506 * @handle: device handle 507 * @block_size: Block size of the volume 508 * @id: target id 509 * @channel: target channel 510 * @volume_type: the raid level 511 * @device_info: bitfield provides detailed info about the hidden components 512 * @num_pds: number of hidden raid components 513 * @responding: used in _scsih_raid_device_mark_responding 514 * @percent_complete: resync percent complete 515 * @direct_io_enabled: Whether direct io to PDs are allowed or not 516 * @stripe_exponent: X where 2powX is the stripe sz in blocks 517 * @block_exponent: X where 2powX is the block sz in bytes 518 * @max_lba: Maximum number of LBA in the volume 519 * @stripe_sz: Stripe Size of the volume 520 * @device_info: Device info of the volume member disk 521 * @pd_handle: Array of handles of the physical drives for direct I/O in le16 522 */ 523 #define MPT_MAX_WARPDRIVE_PDS 8 524 struct _raid_device { 525 struct list_head list; 526 struct scsi_target *starget; 527 struct scsi_device *sdev; 528 u64 wwid; 529 u16 handle; 530 u16 block_sz; 531 int id; 532 int channel; 533 u8 volume_type; 534 u8 num_pds; 535 u8 responding; 536 u8 percent_complete; 537 u8 direct_io_enabled; 538 u8 stripe_exponent; 539 u8 block_exponent; 540 u64 max_lba; 541 u32 stripe_sz; 542 u32 device_info; 543 u16 pd_handle[MPT_MAX_WARPDRIVE_PDS]; 544 }; 545 546 /** 547 * struct _boot_device - boot device info 548 * @is_raid: flag to indicate whether this is volume 549 * @device: holds pointer for either struct _sas_device or 550 * struct _raid_device 551 */ 552 struct _boot_device { 553 u8 is_raid; 554 void *device; 555 }; 556 557 /** 558 * struct _sas_port - wide/narrow sas port information 559 * @port_list: list of ports belonging to expander 560 * @num_phys: number of phys belonging to this port 561 * @remote_identify: attached device identification 562 * @rphy: sas transport rphy object 563 * @port: sas transport wide/narrow port object 564 * @phy_list: _sas_phy list objects belonging to this port 565 */ 566 struct _sas_port { 567 struct list_head port_list; 568 u8 num_phys; 569 struct sas_identify remote_identify; 570 struct sas_rphy *rphy; 571 struct sas_port *port; 572 struct list_head phy_list; 573 }; 574 575 /** 576 * struct _sas_phy - phy information 577 * @port_siblings: list of phys belonging to a port 578 * @identify: phy identification 579 * @remote_identify: attached device identification 580 * @phy: sas transport phy object 581 * @phy_id: unique phy id 582 * @handle: device handle for this phy 583 * @attached_handle: device handle for attached device 584 * @phy_belongs_to_port: port has been created for this phy 585 */ 586 struct _sas_phy { 587 struct list_head port_siblings; 588 struct sas_identify identify; 589 struct sas_identify remote_identify; 590 struct sas_phy *phy; 591 u8 phy_id; 592 u16 handle; 593 u16 attached_handle; 594 u8 phy_belongs_to_port; 595 }; 596 597 /** 598 * struct _sas_node - sas_host/expander information 599 * @list: list of expanders 600 * @parent_dev: parent device class 601 * @num_phys: number phys belonging to this sas_host/expander 602 * @sas_address: sas address of this sas_host/expander 603 * @handle: handle for this sas_host/expander 604 * @sas_address_parent: sas address of parent expander or sas host 605 * @enclosure_handle: handle for this a member of an enclosure 606 * @device_info: bitwise defining capabilities of this sas_host/expander 607 * @responding: used in _scsih_expander_device_mark_responding 608 * @phy: a list of phys that make up this sas_host/expander 609 * @sas_port_list: list of ports attached to this sas_host/expander 610 */ 611 struct _sas_node { 612 struct list_head list; 613 struct device *parent_dev; 614 u8 num_phys; 615 u64 sas_address; 616 u16 handle; 617 u64 sas_address_parent; 618 u16 enclosure_handle; 619 u64 enclosure_logical_id; 620 u8 responding; 621 struct _sas_phy *phy; 622 struct list_head sas_port_list; 623 }; 624 625 /** 626 * enum reset_type - reset state 627 * @FORCE_BIG_HAMMER: issue diagnostic reset 628 * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer 629 */ 630 enum reset_type { 631 FORCE_BIG_HAMMER, 632 SOFT_RESET, 633 }; 634 635 /** 636 * struct chain_tracker - firmware chain tracker 637 * @chain_buffer: chain buffer 638 * @chain_buffer_dma: physical address 639 * @tracker_list: list of free request (ioc->free_chain_list) 640 */ 641 struct chain_tracker { 642 void *chain_buffer; 643 dma_addr_t chain_buffer_dma; 644 struct list_head tracker_list; 645 }; 646 647 /** 648 * struct scsiio_tracker - scsi mf request tracker 649 * @smid: system message id 650 * @scmd: scsi request pointer 651 * @cb_idx: callback index 652 * @direct_io: To indicate whether I/O is direct (WARPDRIVE) 653 * @tracker_list: list of free request (ioc->free_list) 654 * @msix_io: IO's msix 655 */ 656 struct scsiio_tracker { 657 u16 smid; 658 struct scsi_cmnd *scmd; 659 u8 cb_idx; 660 u8 direct_io; 661 struct list_head chain_list; 662 struct list_head tracker_list; 663 u16 msix_io; 664 }; 665 666 /** 667 * struct request_tracker - firmware request tracker 668 * @smid: system message id 669 * @cb_idx: callback index 670 * @tracker_list: list of free request (ioc->free_list) 671 */ 672 struct request_tracker { 673 u16 smid; 674 u8 cb_idx; 675 struct list_head tracker_list; 676 }; 677 678 /** 679 * struct _tr_list - target reset list 680 * @handle: device handle 681 * @state: state machine 682 */ 683 struct _tr_list { 684 struct list_head list; 685 u16 handle; 686 u16 state; 687 }; 688 689 /** 690 * struct _sc_list - delayed SAS_IO_UNIT_CONTROL message list 691 * @handle: device handle 692 */ 693 struct _sc_list { 694 struct list_head list; 695 u16 handle; 696 }; 697 698 /** 699 * struct _event_ack_list - delayed event acknowledgment list 700 * @Event: Event ID 701 * @EventContext: used to track the event uniquely 702 */ 703 struct _event_ack_list { 704 struct list_head list; 705 u16 Event; 706 u32 EventContext; 707 }; 708 709 /** 710 * struct adapter_reply_queue - the reply queue struct 711 * @ioc: per adapter object 712 * @msix_index: msix index into vector table 713 * @vector: irq vector 714 * @reply_post_host_index: head index in the pool where FW completes IO 715 * @reply_post_free: reply post base virt address 716 * @name: the name registered to request_irq() 717 * @busy: isr is actively processing replies on another cpu 718 * @list: this list 719 */ 720 struct adapter_reply_queue { 721 struct MPT3SAS_ADAPTER *ioc; 722 u8 msix_index; 723 unsigned int vector; 724 u32 reply_post_host_index; 725 Mpi2ReplyDescriptorsUnion_t *reply_post_free; 726 char name[MPT_NAME_LENGTH]; 727 atomic_t busy; 728 cpumask_var_t affinity_hint; 729 struct list_head list; 730 }; 731 732 typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); 733 734 /* SAS3.0 support */ 735 typedef int (*MPT_BUILD_SG_SCMD)(struct MPT3SAS_ADAPTER *ioc, 736 struct scsi_cmnd *scmd, u16 smid); 737 typedef void (*MPT_BUILD_SG)(struct MPT3SAS_ADAPTER *ioc, void *psge, 738 dma_addr_t data_out_dma, size_t data_out_sz, 739 dma_addr_t data_in_dma, size_t data_in_sz); 740 typedef void (*MPT_BUILD_ZERO_LEN_SGE)(struct MPT3SAS_ADAPTER *ioc, 741 void *paddr); 742 743 744 745 /* IOC Facts and Port Facts converted from little endian to cpu */ 746 union mpi3_version_union { 747 MPI2_VERSION_STRUCT Struct; 748 u32 Word; 749 }; 750 751 struct mpt3sas_facts { 752 u16 MsgVersion; 753 u16 HeaderVersion; 754 u8 IOCNumber; 755 u8 VP_ID; 756 u8 VF_ID; 757 u16 IOCExceptions; 758 u16 IOCStatus; 759 u32 IOCLogInfo; 760 u8 MaxChainDepth; 761 u8 WhoInit; 762 u8 NumberOfPorts; 763 u8 MaxMSIxVectors; 764 u16 RequestCredit; 765 u16 ProductID; 766 u32 IOCCapabilities; 767 union mpi3_version_union FWVersion; 768 u16 IOCRequestFrameSize; 769 u16 IOCMaxChainSegmentSize; 770 u16 MaxInitiators; 771 u16 MaxTargets; 772 u16 MaxSasExpanders; 773 u16 MaxEnclosures; 774 u16 ProtocolFlags; 775 u16 HighPriorityCredit; 776 u16 MaxReplyDescriptorPostQueueDepth; 777 u8 ReplyFrameSize; 778 u8 MaxVolumes; 779 u16 MaxDevHandle; 780 u16 MaxPersistentEntries; 781 u16 MinDevHandle; 782 }; 783 784 struct mpt3sas_port_facts { 785 u8 PortNumber; 786 u8 VP_ID; 787 u8 VF_ID; 788 u8 PortType; 789 u16 MaxPostedCmdBuffers; 790 }; 791 792 struct reply_post_struct { 793 Mpi2ReplyDescriptorsUnion_t *reply_post_free; 794 dma_addr_t reply_post_free_dma; 795 }; 796 797 /** 798 * enum mutex_type - task management mutex type 799 * @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it 800 * @TM_MUTEX_ON: mutex is required 801 */ 802 enum mutex_type { 803 TM_MUTEX_OFF = 0, 804 TM_MUTEX_ON = 1, 805 }; 806 807 typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); 808 /** 809 * struct MPT3SAS_ADAPTER - per adapter struct 810 * @list: ioc_list 811 * @shost: shost object 812 * @id: unique adapter id 813 * @cpu_count: number online cpus 814 * @name: generic ioc string 815 * @tmp_string: tmp string used for logging 816 * @pdev: pci pdev object 817 * @pio_chip: physical io register space 818 * @chip: memory mapped register space 819 * @chip_phys: physical addrss prior to mapping 820 * @logging_level: see mpt3sas_debug.h 821 * @fwfault_debug: debuging FW timeouts 822 * @ir_firmware: IR firmware present 823 * @bars: bitmask of BAR's that must be configured 824 * @mask_interrupts: ignore interrupt 825 * @dma_mask: used to set the consistent dma mask 826 * @fault_reset_work_q_name: fw fault work queue 827 * @fault_reset_work_q: "" 828 * @fault_reset_work: "" 829 * @firmware_event_name: fw event work queue 830 * @firmware_event_thread: "" 831 * @fw_event_lock: 832 * @fw_event_list: list of fw events 833 * @aen_event_read_flag: event log was read 834 * @broadcast_aen_busy: broadcast aen waiting to be serviced 835 * @shost_recovery: host reset in progress 836 * @ioc_reset_in_progress_lock: 837 * @ioc_link_reset_in_progress: phy/hard reset in progress 838 * @ignore_loginfos: ignore loginfos during task management 839 * @remove_host: flag for when driver unloads, to avoid sending dev resets 840 * @pci_error_recovery: flag to prevent ioc access until slot reset completes 841 * @wait_for_discovery_to_complete: flag set at driver load time when 842 * waiting on reporting devices 843 * @is_driver_loading: flag set at driver load time 844 * @port_enable_failed: flag set when port enable has failed 845 * @start_scan: flag set from scan_start callback, cleared from _mpt3sas_fw_work 846 * @start_scan_failed: means port enable failed, return's the ioc_status 847 * @msix_enable: flag indicating msix is enabled 848 * @msix_vector_count: number msix vectors 849 * @cpu_msix_table: table for mapping cpus to msix index 850 * @cpu_msix_table_sz: table size 851 * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands 852 * @scsi_io_cb_idx: shost generated commands 853 * @tm_cb_idx: task management commands 854 * @scsih_cb_idx: scsih internal commands 855 * @transport_cb_idx: transport internal commands 856 * @ctl_cb_idx: clt internal commands 857 * @base_cb_idx: base internal commands 858 * @config_cb_idx: base internal commands 859 * @tm_tr_cb_idx : device removal target reset handshake 860 * @tm_tr_volume_cb_idx : volume removal target reset 861 * @base_cmds: 862 * @transport_cmds: 863 * @scsih_cmds: 864 * @tm_cmds: 865 * @ctl_cmds: 866 * @config_cmds: 867 * @base_add_sg_single: handler for either 32/64 bit sgl's 868 * @event_type: bits indicating which events to log 869 * @event_context: unique id for each logged event 870 * @event_log: event log pointer 871 * @event_masks: events that are masked 872 * @facts: static facts data 873 * @pfacts: static port facts data 874 * @manu_pg0: static manufacturing page 0 875 * @manu_pg10: static manufacturing page 10 876 * @manu_pg11: static manufacturing page 11 877 * @bios_pg2: static bios page 2 878 * @bios_pg3: static bios page 3 879 * @ioc_pg8: static ioc page 8 880 * @iounit_pg0: static iounit page 0 881 * @iounit_pg1: static iounit page 1 882 * @iounit_pg8: static iounit page 8 883 * @sas_hba: sas host object 884 * @sas_expander_list: expander object list 885 * @sas_node_lock: 886 * @sas_device_list: sas device object list 887 * @sas_device_init_list: sas device object list (used only at init time) 888 * @sas_device_lock: 889 * @io_missing_delay: time for IO completed by fw when PDR enabled 890 * @device_missing_delay: time for device missing by fw when PDR enabled 891 * @sas_id : used for setting volume target IDs 892 * @blocking_handles: bitmask used to identify which devices need blocking 893 * @pd_handles : bitmask for PD handles 894 * @pd_handles_sz : size of pd_handle bitmask 895 * @config_page_sz: config page size 896 * @config_page: reserve memory for config page payload 897 * @config_page_dma: 898 * @hba_queue_depth: hba request queue depth 899 * @sge_size: sg element size for either 32/64 bit 900 * @scsiio_depth: SCSI_IO queue depth 901 * @request_sz: per request frame size 902 * @request: pool of request frames 903 * @request_dma: 904 * @request_dma_sz: 905 * @scsi_lookup: firmware request tracker list 906 * @scsi_lookup_lock: 907 * @free_list: free list of request 908 * @pending_io_count: 909 * @reset_wq: 910 * @chain: pool of chains 911 * @chain_dma: 912 * @max_sges_in_main_message: number sg elements in main message 913 * @max_sges_in_chain_message: number sg elements per chain 914 * @chains_needed_per_io: max chains per io 915 * @chain_depth: total chains allocated 916 * @chain_segment_sz: gives the max number of 917 * SGEs accommodate on single chain buffer 918 * @hi_priority_smid: 919 * @hi_priority: 920 * @hi_priority_dma: 921 * @hi_priority_depth: 922 * @hpr_lookup: 923 * @hpr_free_list: 924 * @internal_smid: 925 * @internal: 926 * @internal_dma: 927 * @internal_depth: 928 * @internal_lookup: 929 * @internal_free_list: 930 * @sense: pool of sense 931 * @sense_dma: 932 * @sense_dma_pool: 933 * @reply_depth: hba reply queue depth: 934 * @reply_sz: per reply frame size: 935 * @reply: pool of replys: 936 * @reply_dma: 937 * @reply_dma_pool: 938 * @reply_free_queue_depth: reply free depth 939 * @reply_free: pool for reply free queue (32 bit addr) 940 * @reply_free_dma: 941 * @reply_free_dma_pool: 942 * @reply_free_host_index: tail index in pool to insert free replys 943 * @reply_post_queue_depth: reply post queue depth 944 * @reply_post_struct: struct for reply_post_free physical & virt address 945 * @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init 946 * @rdpq_array_enable: rdpq_array support is enabled in the driver 947 * @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag 948 * is assigned only ones 949 * @reply_queue_count: number of reply queue's 950 * @reply_queue_list: link list contaning the reply queue info 951 * @msix96_vector: 96 MSI-X vector support 952 * @replyPostRegisterIndex: index of next position in Reply Desc Post Queue 953 * @delayed_tr_list: target reset link list 954 * @delayed_tr_volume_list: volume target reset link list 955 * @delayed_sc_list: 956 * @delayed_event_ack_list: 957 * @temp_sensors_count: flag to carry the number of temperature sensors 958 * @pci_access_mutex: Mutex to synchronize ioctl,sysfs show path and 959 * pci resource handling. PCI resource freeing will lead to free 960 * vital hardware/memory resource, which might be in use by cli/sysfs 961 * path functions resulting in Null pointer reference followed by kernel 962 * crash. To avoid the above race condition we use mutex syncrhonization 963 * which ensures the syncrhonization between cli/sysfs_show path. 964 */ 965 struct MPT3SAS_ADAPTER { 966 struct list_head list; 967 struct Scsi_Host *shost; 968 u8 id; 969 int cpu_count; 970 char name[MPT_NAME_LENGTH]; 971 char driver_name[MPT_NAME_LENGTH]; 972 char tmp_string[MPT_STRING_LENGTH]; 973 struct pci_dev *pdev; 974 Mpi2SystemInterfaceRegs_t __iomem *chip; 975 resource_size_t chip_phys; 976 int logging_level; 977 int fwfault_debug; 978 u8 ir_firmware; 979 int bars; 980 u8 mask_interrupts; 981 int dma_mask; 982 983 /* fw fault handler */ 984 char fault_reset_work_q_name[20]; 985 struct workqueue_struct *fault_reset_work_q; 986 struct delayed_work fault_reset_work; 987 988 /* fw event handler */ 989 char firmware_event_name[20]; 990 struct workqueue_struct *firmware_event_thread; 991 spinlock_t fw_event_lock; 992 struct list_head fw_event_list; 993 994 /* misc flags */ 995 int aen_event_read_flag; 996 u8 broadcast_aen_busy; 997 u16 broadcast_aen_pending; 998 u8 shost_recovery; 999 1000 struct mutex reset_in_progress_mutex; 1001 spinlock_t ioc_reset_in_progress_lock; 1002 u8 ioc_link_reset_in_progress; 1003 u8 ioc_reset_in_progress_status; 1004 1005 u8 ignore_loginfos; 1006 u8 remove_host; 1007 u8 pci_error_recovery; 1008 u8 wait_for_discovery_to_complete; 1009 u8 is_driver_loading; 1010 u8 port_enable_failed; 1011 u8 start_scan; 1012 u16 start_scan_failed; 1013 1014 u8 msix_enable; 1015 u16 msix_vector_count; 1016 u8 *cpu_msix_table; 1017 u16 cpu_msix_table_sz; 1018 resource_size_t __iomem **reply_post_host_index; 1019 u32 ioc_reset_count; 1020 MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; 1021 u32 non_operational_loop; 1022 1023 /* internal commands, callback index */ 1024 u8 scsi_io_cb_idx; 1025 u8 tm_cb_idx; 1026 u8 transport_cb_idx; 1027 u8 scsih_cb_idx; 1028 u8 ctl_cb_idx; 1029 u8 base_cb_idx; 1030 u8 port_enable_cb_idx; 1031 u8 config_cb_idx; 1032 u8 tm_tr_cb_idx; 1033 u8 tm_tr_volume_cb_idx; 1034 u8 tm_sas_control_cb_idx; 1035 struct _internal_cmd base_cmds; 1036 struct _internal_cmd port_enable_cmds; 1037 struct _internal_cmd transport_cmds; 1038 struct _internal_cmd scsih_cmds; 1039 struct _internal_cmd tm_cmds; 1040 struct _internal_cmd ctl_cmds; 1041 struct _internal_cmd config_cmds; 1042 1043 MPT_ADD_SGE base_add_sg_single; 1044 1045 /* function ptr for either IEEE or MPI sg elements */ 1046 MPT_BUILD_SG_SCMD build_sg_scmd; 1047 MPT_BUILD_SG build_sg; 1048 MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge; 1049 u16 sge_size_ieee; 1050 u16 hba_mpi_version_belonged; 1051 1052 /* function ptr for MPI sg elements only */ 1053 MPT_BUILD_SG build_sg_mpi; 1054 MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge_mpi; 1055 1056 /* event log */ 1057 u32 event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; 1058 u32 event_context; 1059 void *event_log; 1060 u32 event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; 1061 1062 /* static config pages */ 1063 struct mpt3sas_facts facts; 1064 struct mpt3sas_port_facts *pfacts; 1065 Mpi2ManufacturingPage0_t manu_pg0; 1066 struct Mpi2ManufacturingPage10_t manu_pg10; 1067 struct Mpi2ManufacturingPage11_t manu_pg11; 1068 Mpi2BiosPage2_t bios_pg2; 1069 Mpi2BiosPage3_t bios_pg3; 1070 Mpi2IOCPage8_t ioc_pg8; 1071 Mpi2IOUnitPage0_t iounit_pg0; 1072 Mpi2IOUnitPage1_t iounit_pg1; 1073 Mpi2IOUnitPage8_t iounit_pg8; 1074 1075 struct _boot_device req_boot_device; 1076 struct _boot_device req_alt_boot_device; 1077 struct _boot_device current_boot_device; 1078 1079 /* sas hba, expander, and device list */ 1080 struct _sas_node sas_hba; 1081 struct list_head sas_expander_list; 1082 spinlock_t sas_node_lock; 1083 struct list_head sas_device_list; 1084 struct list_head sas_device_init_list; 1085 spinlock_t sas_device_lock; 1086 struct list_head raid_device_list; 1087 spinlock_t raid_device_lock; 1088 u8 io_missing_delay; 1089 u16 device_missing_delay; 1090 int sas_id; 1091 1092 void *blocking_handles; 1093 void *pd_handles; 1094 u16 pd_handles_sz; 1095 1096 /* config page */ 1097 u16 config_page_sz; 1098 void *config_page; 1099 dma_addr_t config_page_dma; 1100 1101 /* scsiio request */ 1102 u16 hba_queue_depth; 1103 u16 sge_size; 1104 u16 scsiio_depth; 1105 u16 request_sz; 1106 u8 *request; 1107 dma_addr_t request_dma; 1108 u32 request_dma_sz; 1109 struct scsiio_tracker *scsi_lookup; 1110 ulong scsi_lookup_pages; 1111 spinlock_t scsi_lookup_lock; 1112 struct list_head free_list; 1113 int pending_io_count; 1114 wait_queue_head_t reset_wq; 1115 1116 /* chain */ 1117 struct chain_tracker *chain_lookup; 1118 struct list_head free_chain_list; 1119 struct dma_pool *chain_dma_pool; 1120 ulong chain_pages; 1121 u16 max_sges_in_main_message; 1122 u16 max_sges_in_chain_message; 1123 u16 chains_needed_per_io; 1124 u32 chain_depth; 1125 u16 chain_segment_sz; 1126 1127 /* hi-priority queue */ 1128 u16 hi_priority_smid; 1129 u8 *hi_priority; 1130 dma_addr_t hi_priority_dma; 1131 u16 hi_priority_depth; 1132 struct request_tracker *hpr_lookup; 1133 struct list_head hpr_free_list; 1134 1135 /* internal queue */ 1136 u16 internal_smid; 1137 u8 *internal; 1138 dma_addr_t internal_dma; 1139 u16 internal_depth; 1140 struct request_tracker *internal_lookup; 1141 struct list_head internal_free_list; 1142 1143 /* sense */ 1144 u8 *sense; 1145 dma_addr_t sense_dma; 1146 struct dma_pool *sense_dma_pool; 1147 1148 /* reply */ 1149 u16 reply_sz; 1150 u8 *reply; 1151 dma_addr_t reply_dma; 1152 u32 reply_dma_max_address; 1153 u32 reply_dma_min_address; 1154 struct dma_pool *reply_dma_pool; 1155 1156 /* reply free queue */ 1157 u16 reply_free_queue_depth; 1158 __le32 *reply_free; 1159 dma_addr_t reply_free_dma; 1160 struct dma_pool *reply_free_dma_pool; 1161 u32 reply_free_host_index; 1162 1163 /* reply post queue */ 1164 u16 reply_post_queue_depth; 1165 struct reply_post_struct *reply_post; 1166 u8 rdpq_array_capable; 1167 u8 rdpq_array_enable; 1168 u8 rdpq_array_enable_assigned; 1169 struct dma_pool *reply_post_free_dma_pool; 1170 u8 reply_queue_count; 1171 struct list_head reply_queue_list; 1172 1173 u8 msix96_vector; 1174 /* reply post register index */ 1175 resource_size_t **replyPostRegisterIndex; 1176 1177 struct list_head delayed_tr_list; 1178 struct list_head delayed_tr_volume_list; 1179 struct list_head delayed_sc_list; 1180 struct list_head delayed_event_ack_list; 1181 u8 temp_sensors_count; 1182 struct mutex pci_access_mutex; 1183 1184 /* diag buffer support */ 1185 u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT]; 1186 u32 diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT]; 1187 dma_addr_t diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT]; 1188 u8 diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT]; 1189 u32 unique_id[MPI2_DIAG_BUF_TYPE_COUNT]; 1190 u32 product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23]; 1191 u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT]; 1192 u32 ring_buffer_offset; 1193 u32 ring_buffer_sz; 1194 u8 is_warpdrive; 1195 u8 hide_ir_msg; 1196 u8 mfg_pg10_hide_flag; 1197 u8 hide_drives; 1198 spinlock_t diag_trigger_lock; 1199 u8 diag_trigger_active; 1200 struct SL_WH_MASTER_TRIGGER_T diag_trigger_master; 1201 struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event; 1202 struct SL_WH_SCSI_TRIGGERS_T diag_trigger_scsi; 1203 struct SL_WH_MPI_TRIGGERS_T diag_trigger_mpi; 1204 }; 1205 1206 typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 1207 u32 reply); 1208 1209 1210 /* base shared API */ 1211 extern struct list_head mpt3sas_ioc_list; 1212 extern char driver_name[MPT_NAME_LENGTH]; 1213 /* spinlock on list operations over IOCs 1214 * Case: when multiple warpdrive cards(IOCs) are in use 1215 * Each IOC will added to the ioc list structure on initialization. 1216 * Watchdog threads run at regular intervals to check IOC for any 1217 * fault conditions which will trigger the dead_ioc thread to 1218 * deallocate pci resource, resulting deleting the IOC netry from list, 1219 * this deletion need to protected by spinlock to enusre that 1220 * ioc removal is syncrhonized, if not synchronized it might lead to 1221 * list_del corruption as the ioc list is traversed in cli path. 1222 */ 1223 extern spinlock_t gioc_lock; 1224 1225 void mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc); 1226 void mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc); 1227 1228 int mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc); 1229 void mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc); 1230 int mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc); 1231 void mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc); 1232 int mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, int sleep_flag, 1233 enum reset_type type); 1234 1235 void *mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid); 1236 void *mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid); 1237 __le32 mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, 1238 u16 smid); 1239 1240 void mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc); 1241 1242 /* hi-priority queue */ 1243 u16 mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx); 1244 u16 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx, 1245 struct scsi_cmnd *scmd); 1246 1247 u16 mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx); 1248 void mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid); 1249 void mpt3sas_base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, 1250 u16 handle); 1251 void mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, 1252 u16 handle); 1253 void mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, 1254 u16 smid, u16 msix_task); 1255 void mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid); 1256 void mpt3sas_base_initialize_callback_handler(void); 1257 u8 mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func); 1258 void mpt3sas_base_release_callback_handler(u8 cb_idx); 1259 1260 u8 mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 1261 u32 reply); 1262 u8 mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, 1263 u8 msix_index, u32 reply); 1264 void *mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, 1265 u32 phys_addr); 1266 1267 u32 mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked); 1268 1269 void mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code); 1270 int mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc, 1271 Mpi2SasIoUnitControlReply_t *mpi_reply, 1272 Mpi2SasIoUnitControlRequest_t *mpi_request); 1273 int mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc, 1274 Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request); 1275 1276 void mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, 1277 u32 *event_type); 1278 1279 void mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc); 1280 1281 void mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc, 1282 u16 device_missing_delay, u8 io_missing_delay); 1283 1284 int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc); 1285 1286 1287 /* scsih shared API */ 1288 u8 mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, 1289 u32 reply); 1290 void mpt3sas_scsih_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase); 1291 1292 int mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, 1293 uint channel, uint id, uint lun, u8 type, u16 smid_task, 1294 ulong timeout, enum mutex_type m_type); 1295 void mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle); 1296 void mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle); 1297 void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address); 1298 void mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc, 1299 u64 sas_address); 1300 u8 mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER *ioc, 1301 u16 smid); 1302 1303 struct _sas_node *mpt3sas_scsih_expander_find_by_handle( 1304 struct MPT3SAS_ADAPTER *ioc, u16 handle); 1305 struct _sas_node *mpt3sas_scsih_expander_find_by_sas_address( 1306 struct MPT3SAS_ADAPTER *ioc, u64 sas_address); 1307 struct _sas_device *mpt3sas_get_sdev_by_addr( 1308 struct MPT3SAS_ADAPTER *ioc, u64 sas_address); 1309 struct _sas_device *__mpt3sas_get_sdev_by_addr( 1310 struct MPT3SAS_ADAPTER *ioc, u64 sas_address); 1311 1312 void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc); 1313 struct _raid_device * 1314 mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle); 1315 1316 /* config shared API */ 1317 u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 1318 u32 reply); 1319 int mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc, 1320 u8 *num_phys); 1321 int mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc, 1322 Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page); 1323 int mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc, 1324 Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page, 1325 u16 sz); 1326 int mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc, 1327 Mpi2ConfigReply_t *mpi_reply, 1328 struct Mpi2ManufacturingPage10_t *config_page); 1329 1330 int mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc, 1331 Mpi2ConfigReply_t *mpi_reply, 1332 struct Mpi2ManufacturingPage11_t *config_page); 1333 int mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc, 1334 Mpi2ConfigReply_t *mpi_reply, 1335 struct Mpi2ManufacturingPage11_t *config_page); 1336 1337 int mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1338 *mpi_reply, Mpi2BiosPage2_t *config_page); 1339 int mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1340 *mpi_reply, Mpi2BiosPage3_t *config_page); 1341 int mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1342 *mpi_reply, Mpi2IOUnitPage0_t *config_page); 1343 int mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc, 1344 Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page, 1345 u32 form, u32 handle); 1346 int mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc, 1347 Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page, 1348 u32 form, u32 handle); 1349 int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, 1350 Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, 1351 u16 sz); 1352 int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1353 *mpi_reply, Mpi2IOUnitPage1_t *config_page); 1354 int mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc, 1355 Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz); 1356 int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1357 *mpi_reply, Mpi2IOUnitPage1_t *config_page); 1358 int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1359 *mpi_reply, Mpi2IOUnitPage8_t *config_page); 1360 int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, 1361 Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, 1362 u16 sz); 1363 int mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, 1364 Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, 1365 u16 sz); 1366 int mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1367 *mpi_reply, Mpi2IOCPage8_t *config_page); 1368 int mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc, 1369 Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage0_t *config_page, 1370 u32 form, u32 handle); 1371 int mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc, 1372 Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage1_t *config_page, 1373 u32 phy_number, u16 handle); 1374 int mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc, 1375 Mpi2ConfigReply_t *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, 1376 u32 form, u32 handle); 1377 int mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1378 *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number); 1379 int mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t 1380 *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number); 1381 int mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc, 1382 Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, 1383 u32 handle); 1384 int mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle, 1385 u8 *num_pds); 1386 int mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc, 1387 Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, 1388 u32 handle, u16 sz); 1389 int mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, 1390 Mpi2ConfigReply_t *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, 1391 u32 form, u32 form_specific); 1392 int mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle, 1393 u16 *volume_handle); 1394 int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, 1395 u16 volume_handle, u64 *wwid); 1396 1397 /* ctl shared API */ 1398 extern struct device_attribute *mpt3sas_host_attrs[]; 1399 extern struct device_attribute *mpt3sas_dev_attrs[]; 1400 void mpt3sas_ctl_init(ushort hbas_to_enumerate); 1401 void mpt3sas_ctl_exit(ushort hbas_to_enumerate); 1402 u8 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 1403 u32 reply); 1404 void mpt3sas_ctl_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase); 1405 u8 mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc, 1406 u8 msix_index, u32 reply); 1407 void mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc, 1408 Mpi2EventNotificationReply_t *mpi_reply); 1409 1410 void mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc, 1411 u8 bits_to_regsiter); 1412 int mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type, 1413 u8 *issue_reset); 1414 1415 /* transport shared API */ 1416 extern struct scsi_transport_template *mpt3sas_transport_template; 1417 u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, 1418 u32 reply); 1419 struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, 1420 u16 handle, u64 sas_address); 1421 void mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, 1422 u64 sas_address_parent); 1423 int mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy 1424 *mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev); 1425 int mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, 1426 struct _sas_phy *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1, 1427 struct device *parent_dev); 1428 void mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, 1429 u64 sas_address, u16 handle, u8 phy_number, u8 link_rate); 1430 extern struct sas_function_template mpt3sas_transport_functions; 1431 extern struct scsi_transport_template *mpt3sas_transport_template; 1432 extern int scsi_internal_device_block(struct scsi_device *sdev); 1433 extern int scsi_internal_device_unblock(struct scsi_device *sdev, 1434 enum scsi_device_state new_state); 1435 /* trigger data externs */ 1436 void mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc, 1437 struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data); 1438 void mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc, 1439 struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data); 1440 void mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc, 1441 u32 tigger_bitmask); 1442 void mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event, 1443 u16 log_entry_qualifier); 1444 void mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key, 1445 u8 asc, u8 ascq); 1446 void mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status, 1447 u32 loginfo); 1448 1449 /* warpdrive APIs */ 1450 u8 mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc); 1451 void mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc, 1452 struct _raid_device *raid_device); 1453 u8 1454 mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid); 1455 void 1456 mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io); 1457 void 1458 mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, 1459 struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request, 1460 u16 smid); 1461 1462 #endif /* MPT3SAS_BASE_H_INCLUDED */ 1463