1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright 2000-2015 Avago Technologies.  All rights reserved.
4  *
5  *
6  *          Name:  mpi2_sas.h
7  *         Title:  MPI Serial Attached SCSI structures and definitions
8  * Creation Date:  February 9, 2007
9  *
10  * mpi2_sas.h Version:  02.00.10
11  *
12  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
13  *       prefix are for use only on MPI v2.5 products, and must not be used
14  *       with MPI v2.0 products. Unless otherwise noted, names beginning with
15  *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
16  *
17  * Version History
18  * ---------------
19  *
20  * Date      Version   Description
21  * --------  --------  ------------------------------------------------------
22  * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
23  * 06-26-07  02.00.01  Added Clear All Persistent Operation to SAS IO Unit
24  *                     Control Request.
25  * 10-02-08  02.00.02  Added Set IOC Parameter Operation to SAS IO Unit Control
26  *                     Request.
27  * 10-28-09  02.00.03  Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
28  *                     to MPI2_SGE_IO_UNION since it supports chained SGLs.
29  * 05-12-10  02.00.04  Modified some comments.
30  * 08-11-10  02.00.05  Added NCQ operations to SAS IO Unit Control.
31  * 11-18-11  02.00.06  Incorporating additions for MPI v2.5.
32  * 07-10-12  02.00.07  Added MPI2_SATA_PT_SGE_UNION for use in the SATA
33  *                     Passthrough Request message.
34  * 08-19-13  02.00.08  Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete
35  *			for anything newer than MPI v2.0.
36  * 11-18-14  02.00.09  Updated copyright information.
37  * 03-16-15  02.00.10  Updated for MPI v2.6.
38  *                     Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA.
39  * --------------------------------------------------------------------------
40  */
41 
42 #ifndef MPI2_SAS_H
43 #define MPI2_SAS_H
44 
45 /*
46  *Values for SASStatus.
47  */
48 #define MPI2_SASSTATUS_SUCCESS                          (0x00)
49 #define MPI2_SASSTATUS_UNKNOWN_ERROR                    (0x01)
50 #define MPI2_SASSTATUS_INVALID_FRAME                    (0x02)
51 #define MPI2_SASSTATUS_UTC_BAD_DEST                     (0x03)
52 #define MPI2_SASSTATUS_UTC_BREAK_RECEIVED               (0x04)
53 #define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED   (0x05)
54 #define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST           (0x06)
55 #define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED       (0x07)
56 #define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY           (0x08)
57 #define MPI2_SASSTATUS_UTC_WRONG_DESTINATION            (0x09)
58 #define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT           (0x0A)
59 #define MPI2_SASSTATUS_LONG_INFORMATION_UNIT            (0x0B)
60 #define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA    (0x0C)
61 #define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR    (0x0D)
62 #define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED            (0x0E)
63 #define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH       (0x0F)
64 #define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA          (0x10)
65 #define MPI2_SASSTATUS_DATA_OFFSET_ERROR                (0x11)
66 #define MPI2_SASSTATUS_SDSF_NAK_RECEIVED                (0x12)
67 #define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED           (0x13)
68 #define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT       (0x14)
69 
70 /*
71  *Values for the SAS DeviceInfo field used in SAS Device Status Change Event
72  *data and SAS Configuration pages.
73  */
74 #define MPI2_SAS_DEVICE_INFO_SEP                (0x00004000)
75 #define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE       (0x00002000)
76 #define MPI2_SAS_DEVICE_INFO_LSI_DEVICE         (0x00001000)
77 #define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH      (0x00000800)
78 #define MPI2_SAS_DEVICE_INFO_SSP_TARGET         (0x00000400)
79 #define MPI2_SAS_DEVICE_INFO_STP_TARGET         (0x00000200)
80 #define MPI2_SAS_DEVICE_INFO_SMP_TARGET         (0x00000100)
81 #define MPI2_SAS_DEVICE_INFO_SATA_DEVICE        (0x00000080)
82 #define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR      (0x00000040)
83 #define MPI2_SAS_DEVICE_INFO_STP_INITIATOR      (0x00000020)
84 #define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR      (0x00000010)
85 #define MPI2_SAS_DEVICE_INFO_SATA_HOST          (0x00000008)
86 
87 #define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE   (0x00000007)
88 #define MPI2_SAS_DEVICE_INFO_NO_DEVICE          (0x00000000)
89 #define MPI2_SAS_DEVICE_INFO_END_DEVICE         (0x00000001)
90 #define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER      (0x00000002)
91 #define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER    (0x00000003)
92 
93 /*****************************************************************************
94 *
95 *       SAS Messages
96 *
97 *****************************************************************************/
98 
99 /****************************************************************************
100 * SMP Passthrough messages
101 ****************************************************************************/
102 
103 /*SMP Passthrough Request Message */
104 typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST {
105 	U8 PassthroughFlags;	/*0x00 */
106 	U8 PhysicalPort;	/*0x01 */
107 	U8 ChainOffset;		/*0x02 */
108 	U8 Function;		/*0x03 */
109 	U16 RequestDataLength;	/*0x04 */
110 	U8 SGLFlags;		/*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
111 	U8 MsgFlags;		/*0x07 */
112 	U8 VP_ID;		/*0x08 */
113 	U8 VF_ID;		/*0x09 */
114 	U16 Reserved1;		/*0x0A */
115 	U32 Reserved2;		/*0x0C */
116 	U64 SASAddress;		/*0x10 */
117 	U32 Reserved3;		/*0x18 */
118 	U32 Reserved4;		/*0x1C */
119 	MPI2_SIMPLE_SGE_UNION SGL;/*0x20 */
120 } MPI2_SMP_PASSTHROUGH_REQUEST, *PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
121 	Mpi2SmpPassthroughRequest_t, *pMpi2SmpPassthroughRequest_t;
122 
123 /*values for PassthroughFlags field */
124 #define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE      (0x80)
125 
126 /*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
127 
128 /*SMP Passthrough Reply Message */
129 typedef struct _MPI2_SMP_PASSTHROUGH_REPLY {
130 	U8 PassthroughFlags;	/*0x00 */
131 	U8 PhysicalPort;	/*0x01 */
132 	U8 MsgLength;		/*0x02 */
133 	U8 Function;		/*0x03 */
134 	U16 ResponseDataLength;	/*0x04 */
135 	U8 SGLFlags;		/*0x06 */
136 	U8 MsgFlags;		/*0x07 */
137 	U8 VP_ID;		/*0x08 */
138 	U8 VF_ID;		/*0x09 */
139 	U16 Reserved1;		/*0x0A */
140 	U8 Reserved2;		/*0x0C */
141 	U8 SASStatus;		/*0x0D */
142 	U16 IOCStatus;		/*0x0E */
143 	U32 IOCLogInfo;		/*0x10 */
144 	U32 Reserved3;		/*0x14 */
145 	U8 ResponseData[4];	/*0x18 */
146 } MPI2_SMP_PASSTHROUGH_REPLY, *PTR_MPI2_SMP_PASSTHROUGH_REPLY,
147 	Mpi2SmpPassthroughReply_t, *pMpi2SmpPassthroughReply_t;
148 
149 /*values for PassthroughFlags field */
150 #define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE    (0x80)
151 
152 /*values for SASStatus field are at the top of this file */
153 
154 /****************************************************************************
155 * SATA Passthrough messages
156 ****************************************************************************/
157 
158 typedef union _MPI2_SATA_PT_SGE_UNION {
159 	MPI2_SGE_SIMPLE_UNION MpiSimple;	/*MPI v2.0 only */
160 	MPI2_SGE_CHAIN_UNION MpiChain;	/*MPI v2.0 only */
161 	MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
162 	MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;	/*MPI v2.0 only */
163 	MPI25_IEEE_SGE_CHAIN64 IeeeChain64;	/*MPI v2.5 only */
164 } MPI2_SATA_PT_SGE_UNION, *PTR_MPI2_SATA_PT_SGE_UNION,
165 	Mpi2SataPTSGEUnion_t, *pMpi2SataPTSGEUnion_t;
166 
167 /*SATA Passthrough Request Message */
168 typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST {
169 	U16 DevHandle;		/*0x00 */
170 	U8 ChainOffset;		/*0x02 */
171 	U8 Function;		/*0x03 */
172 	U16 PassthroughFlags;	/*0x04 */
173 	U8 SGLFlags;		/*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
174 	U8 MsgFlags;		/*0x07 */
175 	U8 VP_ID;		/*0x08 */
176 	U8 VF_ID;		/*0x09 */
177 	U16 Reserved1;		/*0x0A */
178 	U32 Reserved2;		/*0x0C */
179 	U32 Reserved3;		/*0x10 */
180 	U32 Reserved4;		/*0x14 */
181 	U32 DataLength;		/*0x18 */
182 	U8 CommandFIS[20];	/*0x1C */
183 	MPI2_SATA_PT_SGE_UNION SGL;/*0x30*//*MPI v2.5: IEEE 64 elements only*/
184 } MPI2_SATA_PASSTHROUGH_REQUEST, *PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
185 	Mpi2SataPassthroughRequest_t,
186 	*pMpi2SataPassthroughRequest_t;
187 
188 /*values for PassthroughFlags field */
189 #define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG      (0x0100)
190 #define MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA             (0x0040)
191 #define MPI2_SATA_PT_REQ_PT_FLAGS_DMA               (0x0020)
192 #define MPI2_SATA_PT_REQ_PT_FLAGS_PIO               (0x0010)
193 #define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU    (0x0004)
194 #define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE             (0x0002)
195 #define MPI2_SATA_PT_REQ_PT_FLAGS_READ              (0x0001)
196 
197 /*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
198 
199 /*SATA Passthrough Reply Message */
200 typedef struct _MPI2_SATA_PASSTHROUGH_REPLY {
201 	U16 DevHandle;		/*0x00 */
202 	U8 MsgLength;		/*0x02 */
203 	U8 Function;		/*0x03 */
204 	U16 PassthroughFlags;	/*0x04 */
205 	U8 SGLFlags;		/*0x06 */
206 	U8 MsgFlags;		/*0x07 */
207 	U8 VP_ID;		/*0x08 */
208 	U8 VF_ID;		/*0x09 */
209 	U16 Reserved1;		/*0x0A */
210 	U8 Reserved2;		/*0x0C */
211 	U8 SASStatus;		/*0x0D */
212 	U16 IOCStatus;		/*0x0E */
213 	U32 IOCLogInfo;		/*0x10 */
214 	U8 StatusFIS[20];	/*0x14 */
215 	U32 StatusControlRegisters;	/*0x28 */
216 	U32 TransferCount;	/*0x2C */
217 } MPI2_SATA_PASSTHROUGH_REPLY, *PTR_MPI2_SATA_PASSTHROUGH_REPLY,
218 	Mpi2SataPassthroughReply_t, *pMpi2SataPassthroughReply_t;
219 
220 /*values for SASStatus field are at the top of this file */
221 
222 /****************************************************************************
223 * SAS IO Unit Control messages
224 * (MPI v2.5 and earlier only.
225 * Replaced by IO Unit Control messages in MPI v2.6 and later.)
226 ****************************************************************************/
227 
228 /*SAS IO Unit Control Request Message */
229 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST {
230 	U8 Operation;		/*0x00 */
231 	U8 Reserved1;		/*0x01 */
232 	U8 ChainOffset;		/*0x02 */
233 	U8 Function;		/*0x03 */
234 	U16 DevHandle;		/*0x04 */
235 	U8 IOCParameter;	/*0x06 */
236 	U8 MsgFlags;		/*0x07 */
237 	U8 VP_ID;		/*0x08 */
238 	U8 VF_ID;		/*0x09 */
239 	U16 Reserved3;		/*0x0A */
240 	U16 Reserved4;		/*0x0C */
241 	U8 PhyNum;		/*0x0E */
242 	U8 PrimFlags;		/*0x0F */
243 	U32 Primitive;		/*0x10 */
244 	U8 LookupMethod;	/*0x14 */
245 	U8 Reserved5;		/*0x15 */
246 	U16 SlotNumber;		/*0x16 */
247 	U64 LookupAddress;	/*0x18 */
248 	U32 IOCParameterValue;	/*0x20 */
249 	U32 Reserved7;		/*0x24 */
250 	U32 Reserved8;		/*0x28 */
251 } MPI2_SAS_IOUNIT_CONTROL_REQUEST,
252 	*PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
253 	Mpi2SasIoUnitControlRequest_t,
254 	*pMpi2SasIoUnitControlRequest_t;
255 
256 /*values for the Operation field */
257 #define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT        (0x02)
258 #define MPI2_SAS_OP_PHY_LINK_RESET              (0x06)
259 #define MPI2_SAS_OP_PHY_HARD_RESET              (0x07)
260 #define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG         (0x08)
261 #define MPI2_SAS_OP_SEND_PRIMITIVE              (0x0A)
262 #define MPI2_SAS_OP_FORCE_FULL_DISCOVERY        (0x0B)
263 #define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) /* MPI v2.0 only */
264 #define MPI2_SAS_OP_REMOVE_DEVICE               (0x0D)
265 #define MPI2_SAS_OP_LOOKUP_MAPPING              (0x0E)
266 #define MPI2_SAS_OP_SET_IOC_PARAMETER           (0x0F)
267 #define MPI25_SAS_OP_ENABLE_FP_DEVICE           (0x10)
268 #define MPI25_SAS_OP_DISABLE_FP_DEVICE          (0x11)
269 #define MPI25_SAS_OP_ENABLE_FP_ALL              (0x12)
270 #define MPI25_SAS_OP_DISABLE_FP_ALL             (0x13)
271 #define MPI2_SAS_OP_DEV_ENABLE_NCQ              (0x14)
272 #define MPI2_SAS_OP_DEV_DISABLE_NCQ             (0x15)
273 #define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN        (0x80)
274 
275 /*values for the PrimFlags field */
276 #define MPI2_SAS_PRIMFLAGS_SINGLE               (0x08)
277 #define MPI2_SAS_PRIMFLAGS_TRIPLE               (0x02)
278 #define MPI2_SAS_PRIMFLAGS_REDUNDANT            (0x01)
279 
280 /*values for the LookupMethod field */
281 #define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS          (0x01)
282 #define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT   (0x02)
283 #define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME      (0x03)
284 
285 /*SAS IO Unit Control Reply Message */
286 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY {
287 	U8 Operation;		/*0x00 */
288 	U8 Reserved1;		/*0x01 */
289 	U8 MsgLength;		/*0x02 */
290 	U8 Function;		/*0x03 */
291 	U16 DevHandle;		/*0x04 */
292 	U8 IOCParameter;	/*0x06 */
293 	U8 MsgFlags;		/*0x07 */
294 	U8 VP_ID;		/*0x08 */
295 	U8 VF_ID;		/*0x09 */
296 	U16 Reserved3;		/*0x0A */
297 	U16 Reserved4;		/*0x0C */
298 	U16 IOCStatus;		/*0x0E */
299 	U32 IOCLogInfo;		/*0x10 */
300 } MPI2_SAS_IOUNIT_CONTROL_REPLY,
301 	*PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
302 	Mpi2SasIoUnitControlReply_t, *pMpi2SasIoUnitControlReply_t;
303 
304 #endif
305