1 /* 2 * Copyright 2000-2015 Avago Technologies. All rights reserved. 3 * 4 * 5 * Name: mpi2_init.h 6 * Title: MPI SCSI initiator mode messages and structures 7 * Creation Date: June 23, 2006 8 * 9 * mpi2_init.h Version: 02.00.21 10 * 11 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 12 * prefix are for use only on MPI v2.5 products, and must not be used 13 * with MPI v2.0 products. Unless otherwise noted, names beginning with 14 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. 15 * 16 * Version History 17 * --------------- 18 * 19 * Date Version Description 20 * -------- -------- ------------------------------------------------------ 21 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 22 * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. 23 * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. 24 * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. 25 * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. 26 * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. 27 * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO 28 * Control field Task Attribute flags. 29 * Moved LUN field defines to mpi2.h becasue they are 30 * common to many structures. 31 * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to 32 * Query Asynchronous Event. 33 * Defined two new bits in the SlotStatus field of the SCSI 34 * Enclosure Processor Request and Reply. 35 * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for 36 * both SCSI IO Error Reply and SCSI Task Management Reply. 37 * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. 38 * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. 39 * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it. 40 * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request. 41 * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define. 42 * 11-18-11 02.00.12 Incorporating additions for MPI v2.5. 43 * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command 44 * Priority to match SAM-4. 45 * Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY. 46 * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION. 47 * 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY, 48 * replacing the Reserved4 field. 49 * 11-18-14 02.00.16 Updated copyright information. 50 * 03-16-15 02.00.17 Updated for MPI v2.6. 51 * Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH. 52 * Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and 53 * MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF. 54 * 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset. 55 * 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message. 56 * 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message. 57 * 01-21-16 02.00.21 Modified MPI26_SCSITASKMGMT_MSGFLAGS_PCIE* defines to 58 * be unique within first 32 characters. 59 * -------------------------------------------------------------------------- 60 */ 61 62 #ifndef MPI2_INIT_H 63 #define MPI2_INIT_H 64 65 /***************************************************************************** 66 * 67 * SCSI Initiator Messages 68 * 69 *****************************************************************************/ 70 71 /**************************************************************************** 72 * SCSI IO messages and associated structures 73 ****************************************************************************/ 74 75 typedef struct _MPI2_SCSI_IO_CDB_EEDP32 { 76 U8 CDB[20]; /*0x00 */ 77 U32 PrimaryReferenceTag; /*0x14 */ 78 U16 PrimaryApplicationTag; /*0x18 */ 79 U16 PrimaryApplicationTagMask; /*0x1A */ 80 U32 TransferLength; /*0x1C */ 81 } MPI2_SCSI_IO_CDB_EEDP32, *PTR_MPI2_SCSI_IO_CDB_EEDP32, 82 Mpi2ScsiIoCdbEedp32_t, *pMpi2ScsiIoCdbEedp32_t; 83 84 /*MPI v2.0 CDB field */ 85 typedef union _MPI2_SCSI_IO_CDB_UNION { 86 U8 CDB32[32]; 87 MPI2_SCSI_IO_CDB_EEDP32 EEDP32; 88 MPI2_SGE_SIMPLE_UNION SGE; 89 } MPI2_SCSI_IO_CDB_UNION, *PTR_MPI2_SCSI_IO_CDB_UNION, 90 Mpi2ScsiIoCdb_t, *pMpi2ScsiIoCdb_t; 91 92 /*MPI v2.0 SCSI IO Request Message */ 93 typedef struct _MPI2_SCSI_IO_REQUEST { 94 U16 DevHandle; /*0x00 */ 95 U8 ChainOffset; /*0x02 */ 96 U8 Function; /*0x03 */ 97 U16 Reserved1; /*0x04 */ 98 U8 Reserved2; /*0x06 */ 99 U8 MsgFlags; /*0x07 */ 100 U8 VP_ID; /*0x08 */ 101 U8 VF_ID; /*0x09 */ 102 U16 Reserved3; /*0x0A */ 103 U32 SenseBufferLowAddress; /*0x0C */ 104 U16 SGLFlags; /*0x10 */ 105 U8 SenseBufferLength; /*0x12 */ 106 U8 Reserved4; /*0x13 */ 107 U8 SGLOffset0; /*0x14 */ 108 U8 SGLOffset1; /*0x15 */ 109 U8 SGLOffset2; /*0x16 */ 110 U8 SGLOffset3; /*0x17 */ 111 U32 SkipCount; /*0x18 */ 112 U32 DataLength; /*0x1C */ 113 U32 BidirectionalDataLength; /*0x20 */ 114 U16 IoFlags; /*0x24 */ 115 U16 EEDPFlags; /*0x26 */ 116 U32 EEDPBlockSize; /*0x28 */ 117 U32 SecondaryReferenceTag; /*0x2C */ 118 U16 SecondaryApplicationTag; /*0x30 */ 119 U16 ApplicationTagTranslationMask; /*0x32 */ 120 U8 LUN[8]; /*0x34 */ 121 U32 Control; /*0x3C */ 122 MPI2_SCSI_IO_CDB_UNION CDB; /*0x40 */ 123 124 #ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */ 125 MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion; 126 #endif 127 128 MPI2_SGE_IO_UNION SGL; /*0x60 */ 129 130 } MPI2_SCSI_IO_REQUEST, *PTR_MPI2_SCSI_IO_REQUEST, 131 Mpi2SCSIIORequest_t, *pMpi2SCSIIORequest_t; 132 133 /*SCSI IO MsgFlags bits */ 134 135 /*MsgFlags for SenseBufferAddressSpace */ 136 #define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C) 137 #define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00) 138 #define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04) 139 #define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) 140 #define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) 141 #define MPI26_SCSIIO_MSGFLAGS_IOCCTL_SENSE_ADDR (0x08) 142 143 /*SCSI IO SGLFlags bits */ 144 145 /*base values for Data Location Address Space */ 146 #define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C) 147 #define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00) 148 #define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04) 149 #define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08) 150 #define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) 151 152 /*base values for Type */ 153 #define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03) 154 #define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00) 155 #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01) 156 #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02) 157 158 /*shift values for each sub-field */ 159 #define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12) 160 #define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8) 161 #define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) 162 #define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) 163 164 /*number of SGLOffset fields */ 165 #define MPI2_SCSIIO_NUM_SGLOFFSETS (4) 166 167 /*SCSI IO IoFlags bits */ 168 169 /*Large CDB Address Space */ 170 #define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000) 171 #define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000) 172 #define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000) 173 #define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000) 174 #define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000) 175 176 #define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) 177 #define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) 178 #define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400) 179 #define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200) 180 #define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) 181 182 /*SCSI IO EEDPFlags bits */ 183 184 #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000) 185 #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000) 186 #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000) 187 #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000) 188 189 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400) 190 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200) 191 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100) 192 193 #define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) 194 195 #define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007) 196 #define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000) 197 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001) 198 #define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002) 199 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) 200 #define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004) 201 #define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006) 202 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007) 203 204 /*SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */ 205 206 /*SCSI IO Control bits */ 207 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000) 208 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) 209 210 #define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) 211 #define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24) 212 #define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) 213 #define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) 214 #define MPI2_SCSIIO_CONTROL_READ (0x02000000) 215 #define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000) 216 217 #define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) 218 #define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) 219 /*alternate name for the previous field; called Command Priority in SAM-4 */ 220 #define MPI2_SCSIIO_CONTROL_CMDPRI_MASK (0x00007800) 221 #define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT (11) 222 223 #define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) 224 #define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) 225 #define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100) 226 #define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200) 227 #define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400) 228 229 #define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0) 230 #define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000) 231 #define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040) 232 #define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080) 233 234 /*MPI v2.5 CDB field */ 235 typedef union _MPI25_SCSI_IO_CDB_UNION { 236 U8 CDB32[32]; 237 MPI2_SCSI_IO_CDB_EEDP32 EEDP32; 238 MPI2_IEEE_SGE_SIMPLE64 SGE; 239 } MPI25_SCSI_IO_CDB_UNION, *PTR_MPI25_SCSI_IO_CDB_UNION, 240 Mpi25ScsiIoCdb_t, *pMpi25ScsiIoCdb_t; 241 242 /*MPI v2.5/2.6 SCSI IO Request Message */ 243 typedef struct _MPI25_SCSI_IO_REQUEST { 244 U16 DevHandle; /*0x00 */ 245 U8 ChainOffset; /*0x02 */ 246 U8 Function; /*0x03 */ 247 U16 Reserved1; /*0x04 */ 248 U8 Reserved2; /*0x06 */ 249 U8 MsgFlags; /*0x07 */ 250 U8 VP_ID; /*0x08 */ 251 U8 VF_ID; /*0x09 */ 252 U16 Reserved3; /*0x0A */ 253 U32 SenseBufferLowAddress; /*0x0C */ 254 U8 DMAFlags; /*0x10 */ 255 U8 Reserved5; /*0x11 */ 256 U8 SenseBufferLength; /*0x12 */ 257 U8 Reserved4; /*0x13 */ 258 U8 SGLOffset0; /*0x14 */ 259 U8 SGLOffset1; /*0x15 */ 260 U8 SGLOffset2; /*0x16 */ 261 U8 SGLOffset3; /*0x17 */ 262 U32 SkipCount; /*0x18 */ 263 U32 DataLength; /*0x1C */ 264 U32 BidirectionalDataLength; /*0x20 */ 265 U16 IoFlags; /*0x24 */ 266 U16 EEDPFlags; /*0x26 */ 267 U16 EEDPBlockSize; /*0x28 */ 268 U16 Reserved6; /*0x2A */ 269 U32 SecondaryReferenceTag; /*0x2C */ 270 U16 SecondaryApplicationTag; /*0x30 */ 271 U16 ApplicationTagTranslationMask; /*0x32 */ 272 U8 LUN[8]; /*0x34 */ 273 U32 Control; /*0x3C */ 274 MPI25_SCSI_IO_CDB_UNION CDB; /*0x40 */ 275 276 #ifdef MPI25_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */ 277 MPI25_SCSI_IO_VENDOR_UNIQUE VendorRegion; 278 #endif 279 280 MPI25_SGE_IO_UNION SGL; /*0x60 */ 281 282 } MPI25_SCSI_IO_REQUEST, *PTR_MPI25_SCSI_IO_REQUEST, 283 Mpi25SCSIIORequest_t, *pMpi25SCSIIORequest_t; 284 285 /*use MPI2_SCSIIO_MSGFLAGS_ defines for the MsgFlags field */ 286 287 /*Defines for the DMAFlags field 288 * Each setting affects 4 SGLS, from SGL0 to SGL3. 289 * D = Data 290 * C = Cache DIF 291 * I = Interleaved 292 * H = Host DIF 293 */ 294 #define MPI25_SCSIIO_DMAFLAGS_OP_MASK (0x0F) 295 #define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_D (0x00) 296 #define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_C (0x01) 297 #define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_I (0x02) 298 #define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_C (0x03) 299 #define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_I (0x04) 300 #define MPI25_SCSIIO_DMAFLAGS_OP_D_D_I_I (0x05) 301 #define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_C (0x06) 302 #define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_I (0x07) 303 #define MPI25_SCSIIO_DMAFLAGS_OP_D_C_I_I (0x08) 304 #define MPI25_SCSIIO_DMAFLAGS_OP_D_I_I_I (0x09) 305 #define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_D (0x0A) 306 #define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_C (0x0B) 307 #define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_I (0x0C) 308 #define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_C (0x0D) 309 #define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_I (0x0E) 310 #define MPI25_SCSIIO_DMAFLAGS_OP_D_H_I_I (0x0F) 311 312 /*number of SGLOffset fields */ 313 #define MPI25_SCSIIO_NUM_SGLOFFSETS (4) 314 315 /*defines for the IoFlags field */ 316 #define MPI25_SCSIIO_IOFLAGS_IO_PATH_MASK (0xC000) 317 #define MPI25_SCSIIO_IOFLAGS_NORMAL_PATH (0x0000) 318 #define MPI25_SCSIIO_IOFLAGS_FAST_PATH (0x4000) 319 320 #define MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH (0x2000) 321 #define MPI25_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) 322 #define MPI25_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) 323 #define MPI26_SCSIIO_IOFLAGS_PORT_REQUEST (0x0400) 324 #define MPI25_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) 325 326 /*MPI v2.5 defines for the EEDPFlags bits */ 327 /*use MPI2_SCSIIO_EEDPFLAGS_ defines for the other EEDPFlags bits */ 328 #define MPI25_SCSIIO_EEDPFLAGS_ESCAPE_MODE_MASK (0x00C0) 329 #define MPI25_SCSIIO_EEDPFLAGS_COMPATIBLE_MODE (0x0000) 330 #define MPI25_SCSIIO_EEDPFLAGS_DO_NOT_DISABLE_MODE (0x0040) 331 #define MPI25_SCSIIO_EEDPFLAGS_APPTAG_DISABLE_MODE (0x0080) 332 #define MPI25_SCSIIO_EEDPFLAGS_APPTAG_REFTAG_DISABLE_MODE (0x00C0) 333 334 #define MPI25_SCSIIO_EEDPFLAGS_HOST_GUARD_METHOD_MASK (0x0030) 335 #define MPI25_SCSIIO_EEDPFLAGS_T10_CRC_HOST_GUARD (0x0000) 336 #define MPI25_SCSIIO_EEDPFLAGS_IP_CHKSUM_HOST_GUARD (0x0010) 337 338 /*use MPI2_LUN_ defines from mpi2.h for the LUN field */ 339 340 /*use MPI2_SCSIIO_CONTROL_ defines for the Control field */ 341 342 /*NOTE: The SCSI IO Reply is nearly the same for MPI 2.0 and MPI 2.5, so 343 * MPI2_SCSI_IO_REPLY is used for both. 344 */ 345 346 /*SCSI IO Error Reply Message */ 347 typedef struct _MPI2_SCSI_IO_REPLY { 348 U16 DevHandle; /*0x00 */ 349 U8 MsgLength; /*0x02 */ 350 U8 Function; /*0x03 */ 351 U16 Reserved1; /*0x04 */ 352 U8 Reserved2; /*0x06 */ 353 U8 MsgFlags; /*0x07 */ 354 U8 VP_ID; /*0x08 */ 355 U8 VF_ID; /*0x09 */ 356 U16 Reserved3; /*0x0A */ 357 U8 SCSIStatus; /*0x0C */ 358 U8 SCSIState; /*0x0D */ 359 U16 IOCStatus; /*0x0E */ 360 U32 IOCLogInfo; /*0x10 */ 361 U32 TransferCount; /*0x14 */ 362 U32 SenseCount; /*0x18 */ 363 U32 ResponseInfo; /*0x1C */ 364 U16 TaskTag; /*0x20 */ 365 U16 SCSIStatusQualifier; /* 0x22 */ 366 U32 BidirectionalTransferCount; /*0x24 */ 367 /* MPI 2.5+ only; Reserved in MPI 2.0 */ 368 U32 EEDPErrorOffset; /* 0x28 */ 369 /* MPI 2.5+ only; Reserved in MPI 2.0 */ 370 U16 EEDPObservedAppTag; /* 0x2C */ 371 /* MPI 2.5+ only; Reserved in MPI 2.0 */ 372 U16 EEDPObservedGuard; /* 0x2E */ 373 /* MPI 2.5+ only; Reserved in MPI 2.0 */ 374 U32 EEDPObservedRefTag; /* 0x30 */ 375 } MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY, 376 Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t; 377 378 /*SCSI IO Reply MsgFlags bits */ 379 #define MPI26_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01) 380 #define MPI26_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x02) 381 #define MPI26_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x04) 382 383 /*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ 384 385 #define MPI2_SCSI_STATUS_GOOD (0x00) 386 #define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02) 387 #define MPI2_SCSI_STATUS_CONDITION_MET (0x04) 388 #define MPI2_SCSI_STATUS_BUSY (0x08) 389 #define MPI2_SCSI_STATUS_INTERMEDIATE (0x10) 390 #define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) 391 #define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18) 392 #define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /*obsolete */ 393 #define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28) 394 #define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30) 395 #define MPI2_SCSI_STATUS_TASK_ABORTED (0x40) 396 397 /*SCSI IO Reply SCSIState flags */ 398 399 #define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10) 400 #define MPI2_SCSI_STATE_TERMINATED (0x08) 401 #define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04) 402 #define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02) 403 #define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01) 404 405 /*masks and shifts for the ResponseInfo field */ 406 407 #define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF) 408 #define MPI2_SCSI_RI_SHIFT_REASONCODE (0) 409 410 #define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF) 411 412 /**************************************************************************** 413 * SCSI Task Management messages 414 ****************************************************************************/ 415 416 /*SCSI Task Management Request Message */ 417 typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST { 418 U16 DevHandle; /*0x00 */ 419 U8 ChainOffset; /*0x02 */ 420 U8 Function; /*0x03 */ 421 U8 Reserved1; /*0x04 */ 422 U8 TaskType; /*0x05 */ 423 U8 Reserved2; /*0x06 */ 424 U8 MsgFlags; /*0x07 */ 425 U8 VP_ID; /*0x08 */ 426 U8 VF_ID; /*0x09 */ 427 U16 Reserved3; /*0x0A */ 428 U8 LUN[8]; /*0x0C */ 429 U32 Reserved4[7]; /*0x14 */ 430 U16 TaskMID; /*0x30 */ 431 U16 Reserved5; /*0x32 */ 432 } MPI2_SCSI_TASK_MANAGE_REQUEST, 433 *PTR_MPI2_SCSI_TASK_MANAGE_REQUEST, 434 Mpi2SCSITaskManagementRequest_t, 435 *pMpi2SCSITaskManagementRequest_t; 436 437 /*TaskType values */ 438 439 #define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) 440 #define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) 441 #define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) 442 #define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) 443 #define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) 444 #define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) 445 #define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) 446 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) 447 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A) 448 449 /*obsolete TaskType name */ 450 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \ 451 (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT) 452 453 /*MsgFlags bits */ 454 455 #define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) 456 #define MPI26_SCSITASKMGMT_MSGFLAGS_HOT_RESET_PCIE (0x00) 457 #define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) 458 #define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) 459 #define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) 460 461 #define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) 462 #define MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE (0x18) 463 464 /*SCSI Task Management Reply Message */ 465 typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY { 466 U16 DevHandle; /*0x00 */ 467 U8 MsgLength; /*0x02 */ 468 U8 Function; /*0x03 */ 469 U8 ResponseCode; /*0x04 */ 470 U8 TaskType; /*0x05 */ 471 U8 Reserved1; /*0x06 */ 472 U8 MsgFlags; /*0x07 */ 473 U8 VP_ID; /*0x08 */ 474 U8 VF_ID; /*0x09 */ 475 U16 Reserved2; /*0x0A */ 476 U16 Reserved3; /*0x0C */ 477 U16 IOCStatus; /*0x0E */ 478 U32 IOCLogInfo; /*0x10 */ 479 U32 TerminationCount; /*0x14 */ 480 U32 ResponseInfo; /*0x18 */ 481 } MPI2_SCSI_TASK_MANAGE_REPLY, 482 *PTR_MPI2_SCSI_TASK_MANAGE_REPLY, 483 Mpi2SCSITaskManagementReply_t, *pMpi2SCSIManagementReply_t; 484 485 /*ResponseCode values */ 486 487 #define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00) 488 #define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02) 489 #define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04) 490 #define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05) 491 #define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) 492 #define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) 493 #define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A) 494 #define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) 495 496 /*masks and shifts for the ResponseInfo field */ 497 498 #define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF) 499 #define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0) 500 #define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00) 501 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8) 502 #define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000) 503 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16) 504 #define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000) 505 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24) 506 507 /**************************************************************************** 508 * SCSI Enclosure Processor messages 509 ****************************************************************************/ 510 511 /*SCSI Enclosure Processor Request Message */ 512 typedef struct _MPI2_SEP_REQUEST { 513 U16 DevHandle; /*0x00 */ 514 U8 ChainOffset; /*0x02 */ 515 U8 Function; /*0x03 */ 516 U8 Action; /*0x04 */ 517 U8 Flags; /*0x05 */ 518 U8 Reserved1; /*0x06 */ 519 U8 MsgFlags; /*0x07 */ 520 U8 VP_ID; /*0x08 */ 521 U8 VF_ID; /*0x09 */ 522 U16 Reserved2; /*0x0A */ 523 U32 SlotStatus; /*0x0C */ 524 U32 Reserved3; /*0x10 */ 525 U32 Reserved4; /*0x14 */ 526 U32 Reserved5; /*0x18 */ 527 U16 Slot; /*0x1C */ 528 U16 EnclosureHandle; /*0x1E */ 529 } MPI2_SEP_REQUEST, *PTR_MPI2_SEP_REQUEST, 530 Mpi2SepRequest_t, *pMpi2SepRequest_t; 531 532 /*Action defines */ 533 #define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00) 534 #define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01) 535 536 /*Flags defines */ 537 #define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00) 538 #define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) 539 540 /*SlotStatus defines */ 541 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF (0x00080000) 542 #define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) 543 #define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) 544 #define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) 545 #define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) 546 #define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) 547 #define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) 548 #define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) 549 #define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) 550 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) 551 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) 552 #define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) 553 554 /*SCSI Enclosure Processor Reply Message */ 555 typedef struct _MPI2_SEP_REPLY { 556 U16 DevHandle; /*0x00 */ 557 U8 MsgLength; /*0x02 */ 558 U8 Function; /*0x03 */ 559 U8 Action; /*0x04 */ 560 U8 Flags; /*0x05 */ 561 U8 Reserved1; /*0x06 */ 562 U8 MsgFlags; /*0x07 */ 563 U8 VP_ID; /*0x08 */ 564 U8 VF_ID; /*0x09 */ 565 U16 Reserved2; /*0x0A */ 566 U16 Reserved3; /*0x0C */ 567 U16 IOCStatus; /*0x0E */ 568 U32 IOCLogInfo; /*0x10 */ 569 U32 SlotStatus; /*0x14 */ 570 U32 Reserved4; /*0x18 */ 571 U16 Slot; /*0x1C */ 572 U16 EnclosureHandle; /*0x1E */ 573 } MPI2_SEP_REPLY, *PTR_MPI2_SEP_REPLY, 574 Mpi2SepReply_t, *pMpi2SepReply_t; 575 576 /*SlotStatus defines */ 577 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x00080000) 578 #define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) 579 #define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) 580 #define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) 581 #define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) 582 #define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) 583 #define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) 584 #define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010) 585 #define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008) 586 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) 587 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) 588 #define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) 589 590 #endif 591