1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Driver for Broadcom MPI3 Storage Controllers 4 * 5 * Copyright (C) 2017-2023 Broadcom Inc. 6 * (mailto: mpi3mr-linuxdrv.pdl@broadcom.com) 7 * 8 */ 9 10 #include "mpi3mr.h" 11 #include <linux/io-64-nonatomic-lo-hi.h> 12 13 static int 14 mpi3mr_issue_reset(struct mpi3mr_ioc *mrioc, u16 reset_type, u32 reset_reason); 15 static int mpi3mr_setup_admin_qpair(struct mpi3mr_ioc *mrioc); 16 static void mpi3mr_process_factsdata(struct mpi3mr_ioc *mrioc, 17 struct mpi3_ioc_facts_data *facts_data); 18 static void mpi3mr_pel_wait_complete(struct mpi3mr_ioc *mrioc, 19 struct mpi3mr_drv_cmd *drv_cmd); 20 21 static int poll_queues; 22 module_param(poll_queues, int, 0444); 23 MODULE_PARM_DESC(poll_queues, "Number of queues for io_uring poll mode. (Range 1 - 126)"); 24 25 #if defined(writeq) && defined(CONFIG_64BIT) 26 static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr) 27 { 28 writeq(b, addr); 29 } 30 #else 31 static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr) 32 { 33 __u64 data_out = b; 34 35 writel((u32)(data_out), addr); 36 writel((u32)(data_out >> 32), (addr + 4)); 37 } 38 #endif 39 40 static inline bool 41 mpi3mr_check_req_qfull(struct op_req_qinfo *op_req_q) 42 { 43 u16 pi, ci, max_entries; 44 bool is_qfull = false; 45 46 pi = op_req_q->pi; 47 ci = READ_ONCE(op_req_q->ci); 48 max_entries = op_req_q->num_requests; 49 50 if ((ci == (pi + 1)) || ((!ci) && (pi == (max_entries - 1)))) 51 is_qfull = true; 52 53 return is_qfull; 54 } 55 56 static void mpi3mr_sync_irqs(struct mpi3mr_ioc *mrioc) 57 { 58 u16 i, max_vectors; 59 60 max_vectors = mrioc->intr_info_count; 61 62 for (i = 0; i < max_vectors; i++) 63 synchronize_irq(pci_irq_vector(mrioc->pdev, i)); 64 } 65 66 void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc) 67 { 68 mrioc->intr_enabled = 0; 69 mpi3mr_sync_irqs(mrioc); 70 } 71 72 void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc) 73 { 74 mrioc->intr_enabled = 1; 75 } 76 77 static void mpi3mr_cleanup_isr(struct mpi3mr_ioc *mrioc) 78 { 79 u16 i; 80 81 mpi3mr_ioc_disable_intr(mrioc); 82 83 if (!mrioc->intr_info) 84 return; 85 86 for (i = 0; i < mrioc->intr_info_count; i++) 87 free_irq(pci_irq_vector(mrioc->pdev, i), 88 (mrioc->intr_info + i)); 89 90 kfree(mrioc->intr_info); 91 mrioc->intr_info = NULL; 92 mrioc->intr_info_count = 0; 93 mrioc->is_intr_info_set = false; 94 pci_free_irq_vectors(mrioc->pdev); 95 } 96 97 void mpi3mr_add_sg_single(void *paddr, u8 flags, u32 length, 98 dma_addr_t dma_addr) 99 { 100 struct mpi3_sge_common *sgel = paddr; 101 102 sgel->flags = flags; 103 sgel->length = cpu_to_le32(length); 104 sgel->address = cpu_to_le64(dma_addr); 105 } 106 107 void mpi3mr_build_zero_len_sge(void *paddr) 108 { 109 u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; 110 111 mpi3mr_add_sg_single(paddr, sgl_flags, 0, -1); 112 } 113 114 void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc, 115 dma_addr_t phys_addr) 116 { 117 if (!phys_addr) 118 return NULL; 119 120 if ((phys_addr < mrioc->reply_buf_dma) || 121 (phys_addr > mrioc->reply_buf_dma_max_address)) 122 return NULL; 123 124 return mrioc->reply_buf + (phys_addr - mrioc->reply_buf_dma); 125 } 126 127 void *mpi3mr_get_sensebuf_virt_addr(struct mpi3mr_ioc *mrioc, 128 dma_addr_t phys_addr) 129 { 130 if (!phys_addr) 131 return NULL; 132 133 return mrioc->sense_buf + (phys_addr - mrioc->sense_buf_dma); 134 } 135 136 static void mpi3mr_repost_reply_buf(struct mpi3mr_ioc *mrioc, 137 u64 reply_dma) 138 { 139 u32 old_idx = 0; 140 unsigned long flags; 141 142 spin_lock_irqsave(&mrioc->reply_free_queue_lock, flags); 143 old_idx = mrioc->reply_free_queue_host_index; 144 mrioc->reply_free_queue_host_index = ( 145 (mrioc->reply_free_queue_host_index == 146 (mrioc->reply_free_qsz - 1)) ? 0 : 147 (mrioc->reply_free_queue_host_index + 1)); 148 mrioc->reply_free_q[old_idx] = cpu_to_le64(reply_dma); 149 writel(mrioc->reply_free_queue_host_index, 150 &mrioc->sysif_regs->reply_free_host_index); 151 spin_unlock_irqrestore(&mrioc->reply_free_queue_lock, flags); 152 } 153 154 void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc, 155 u64 sense_buf_dma) 156 { 157 u32 old_idx = 0; 158 unsigned long flags; 159 160 spin_lock_irqsave(&mrioc->sbq_lock, flags); 161 old_idx = mrioc->sbq_host_index; 162 mrioc->sbq_host_index = ((mrioc->sbq_host_index == 163 (mrioc->sense_buf_q_sz - 1)) ? 0 : 164 (mrioc->sbq_host_index + 1)); 165 mrioc->sense_buf_q[old_idx] = cpu_to_le64(sense_buf_dma); 166 writel(mrioc->sbq_host_index, 167 &mrioc->sysif_regs->sense_buffer_free_host_index); 168 spin_unlock_irqrestore(&mrioc->sbq_lock, flags); 169 } 170 171 static void mpi3mr_print_event_data(struct mpi3mr_ioc *mrioc, 172 struct mpi3_event_notification_reply *event_reply) 173 { 174 char *desc = NULL; 175 u16 event; 176 177 event = event_reply->event; 178 179 switch (event) { 180 case MPI3_EVENT_LOG_DATA: 181 desc = "Log Data"; 182 break; 183 case MPI3_EVENT_CHANGE: 184 desc = "Event Change"; 185 break; 186 case MPI3_EVENT_GPIO_INTERRUPT: 187 desc = "GPIO Interrupt"; 188 break; 189 case MPI3_EVENT_CABLE_MGMT: 190 desc = "Cable Management"; 191 break; 192 case MPI3_EVENT_ENERGY_PACK_CHANGE: 193 desc = "Energy Pack Change"; 194 break; 195 case MPI3_EVENT_DEVICE_ADDED: 196 { 197 struct mpi3_device_page0 *event_data = 198 (struct mpi3_device_page0 *)event_reply->event_data; 199 ioc_info(mrioc, "Device Added: dev=0x%04x Form=0x%x\n", 200 event_data->dev_handle, event_data->device_form); 201 return; 202 } 203 case MPI3_EVENT_DEVICE_INFO_CHANGED: 204 { 205 struct mpi3_device_page0 *event_data = 206 (struct mpi3_device_page0 *)event_reply->event_data; 207 ioc_info(mrioc, "Device Info Changed: dev=0x%04x Form=0x%x\n", 208 event_data->dev_handle, event_data->device_form); 209 return; 210 } 211 case MPI3_EVENT_DEVICE_STATUS_CHANGE: 212 { 213 struct mpi3_event_data_device_status_change *event_data = 214 (struct mpi3_event_data_device_status_change *)event_reply->event_data; 215 ioc_info(mrioc, "Device status Change: dev=0x%04x RC=0x%x\n", 216 event_data->dev_handle, event_data->reason_code); 217 return; 218 } 219 case MPI3_EVENT_SAS_DISCOVERY: 220 { 221 struct mpi3_event_data_sas_discovery *event_data = 222 (struct mpi3_event_data_sas_discovery *)event_reply->event_data; 223 ioc_info(mrioc, "SAS Discovery: (%s) status (0x%08x)\n", 224 (event_data->reason_code == MPI3_EVENT_SAS_DISC_RC_STARTED) ? 225 "start" : "stop", 226 le32_to_cpu(event_data->discovery_status)); 227 return; 228 } 229 case MPI3_EVENT_SAS_BROADCAST_PRIMITIVE: 230 desc = "SAS Broadcast Primitive"; 231 break; 232 case MPI3_EVENT_SAS_NOTIFY_PRIMITIVE: 233 desc = "SAS Notify Primitive"; 234 break; 235 case MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: 236 desc = "SAS Init Device Status Change"; 237 break; 238 case MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW: 239 desc = "SAS Init Table Overflow"; 240 break; 241 case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST: 242 desc = "SAS Topology Change List"; 243 break; 244 case MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE: 245 desc = "Enclosure Device Status Change"; 246 break; 247 case MPI3_EVENT_ENCL_DEVICE_ADDED: 248 desc = "Enclosure Added"; 249 break; 250 case MPI3_EVENT_HARD_RESET_RECEIVED: 251 desc = "Hard Reset Received"; 252 break; 253 case MPI3_EVENT_SAS_PHY_COUNTER: 254 desc = "SAS PHY Counter"; 255 break; 256 case MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR: 257 desc = "SAS Device Discovery Error"; 258 break; 259 case MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST: 260 desc = "PCIE Topology Change List"; 261 break; 262 case MPI3_EVENT_PCIE_ENUMERATION: 263 { 264 struct mpi3_event_data_pcie_enumeration *event_data = 265 (struct mpi3_event_data_pcie_enumeration *)event_reply->event_data; 266 ioc_info(mrioc, "PCIE Enumeration: (%s)", 267 (event_data->reason_code == 268 MPI3_EVENT_PCIE_ENUM_RC_STARTED) ? "start" : "stop"); 269 if (event_data->enumeration_status) 270 ioc_info(mrioc, "enumeration_status(0x%08x)\n", 271 le32_to_cpu(event_data->enumeration_status)); 272 return; 273 } 274 case MPI3_EVENT_PREPARE_FOR_RESET: 275 desc = "Prepare For Reset"; 276 break; 277 } 278 279 if (!desc) 280 return; 281 282 ioc_info(mrioc, "%s\n", desc); 283 } 284 285 static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc, 286 struct mpi3_default_reply *def_reply) 287 { 288 struct mpi3_event_notification_reply *event_reply = 289 (struct mpi3_event_notification_reply *)def_reply; 290 291 mrioc->change_count = le16_to_cpu(event_reply->ioc_change_count); 292 mpi3mr_print_event_data(mrioc, event_reply); 293 mpi3mr_os_handle_events(mrioc, event_reply); 294 } 295 296 static struct mpi3mr_drv_cmd * 297 mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag, 298 struct mpi3_default_reply *def_reply) 299 { 300 u16 idx; 301 302 switch (host_tag) { 303 case MPI3MR_HOSTTAG_INITCMDS: 304 return &mrioc->init_cmds; 305 case MPI3MR_HOSTTAG_CFG_CMDS: 306 return &mrioc->cfg_cmds; 307 case MPI3MR_HOSTTAG_BSG_CMDS: 308 return &mrioc->bsg_cmds; 309 case MPI3MR_HOSTTAG_BLK_TMS: 310 return &mrioc->host_tm_cmds; 311 case MPI3MR_HOSTTAG_PEL_ABORT: 312 return &mrioc->pel_abort_cmd; 313 case MPI3MR_HOSTTAG_PEL_WAIT: 314 return &mrioc->pel_cmds; 315 case MPI3MR_HOSTTAG_TRANSPORT_CMDS: 316 return &mrioc->transport_cmds; 317 case MPI3MR_HOSTTAG_INVALID: 318 if (def_reply && def_reply->function == 319 MPI3_FUNCTION_EVENT_NOTIFICATION) 320 mpi3mr_handle_events(mrioc, def_reply); 321 return NULL; 322 default: 323 break; 324 } 325 if (host_tag >= MPI3MR_HOSTTAG_DEVRMCMD_MIN && 326 host_tag <= MPI3MR_HOSTTAG_DEVRMCMD_MAX) { 327 idx = host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN; 328 return &mrioc->dev_rmhs_cmds[idx]; 329 } 330 331 if (host_tag >= MPI3MR_HOSTTAG_EVTACKCMD_MIN && 332 host_tag <= MPI3MR_HOSTTAG_EVTACKCMD_MAX) { 333 idx = host_tag - MPI3MR_HOSTTAG_EVTACKCMD_MIN; 334 return &mrioc->evtack_cmds[idx]; 335 } 336 337 return NULL; 338 } 339 340 static void mpi3mr_process_admin_reply_desc(struct mpi3mr_ioc *mrioc, 341 struct mpi3_default_reply_descriptor *reply_desc, u64 *reply_dma) 342 { 343 u16 reply_desc_type, host_tag = 0; 344 u16 ioc_status = MPI3_IOCSTATUS_SUCCESS; 345 u32 ioc_loginfo = 0; 346 struct mpi3_status_reply_descriptor *status_desc; 347 struct mpi3_address_reply_descriptor *addr_desc; 348 struct mpi3_success_reply_descriptor *success_desc; 349 struct mpi3_default_reply *def_reply = NULL; 350 struct mpi3mr_drv_cmd *cmdptr = NULL; 351 struct mpi3_scsi_io_reply *scsi_reply; 352 u8 *sense_buf = NULL; 353 354 *reply_dma = 0; 355 reply_desc_type = le16_to_cpu(reply_desc->reply_flags) & 356 MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK; 357 switch (reply_desc_type) { 358 case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS: 359 status_desc = (struct mpi3_status_reply_descriptor *)reply_desc; 360 host_tag = le16_to_cpu(status_desc->host_tag); 361 ioc_status = le16_to_cpu(status_desc->ioc_status); 362 if (ioc_status & 363 MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL) 364 ioc_loginfo = le32_to_cpu(status_desc->ioc_log_info); 365 ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK; 366 break; 367 case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY: 368 addr_desc = (struct mpi3_address_reply_descriptor *)reply_desc; 369 *reply_dma = le64_to_cpu(addr_desc->reply_frame_address); 370 def_reply = mpi3mr_get_reply_virt_addr(mrioc, *reply_dma); 371 if (!def_reply) 372 goto out; 373 host_tag = le16_to_cpu(def_reply->host_tag); 374 ioc_status = le16_to_cpu(def_reply->ioc_status); 375 if (ioc_status & 376 MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL) 377 ioc_loginfo = le32_to_cpu(def_reply->ioc_log_info); 378 ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK; 379 if (def_reply->function == MPI3_FUNCTION_SCSI_IO) { 380 scsi_reply = (struct mpi3_scsi_io_reply *)def_reply; 381 sense_buf = mpi3mr_get_sensebuf_virt_addr(mrioc, 382 le64_to_cpu(scsi_reply->sense_data_buffer_address)); 383 } 384 break; 385 case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS: 386 success_desc = (struct mpi3_success_reply_descriptor *)reply_desc; 387 host_tag = le16_to_cpu(success_desc->host_tag); 388 break; 389 default: 390 break; 391 } 392 393 cmdptr = mpi3mr_get_drv_cmd(mrioc, host_tag, def_reply); 394 if (cmdptr) { 395 if (cmdptr->state & MPI3MR_CMD_PENDING) { 396 cmdptr->state |= MPI3MR_CMD_COMPLETE; 397 cmdptr->ioc_loginfo = ioc_loginfo; 398 cmdptr->ioc_status = ioc_status; 399 cmdptr->state &= ~MPI3MR_CMD_PENDING; 400 if (def_reply) { 401 cmdptr->state |= MPI3MR_CMD_REPLY_VALID; 402 memcpy((u8 *)cmdptr->reply, (u8 *)def_reply, 403 mrioc->reply_sz); 404 } 405 if (cmdptr->is_waiting) { 406 complete(&cmdptr->done); 407 cmdptr->is_waiting = 0; 408 } else if (cmdptr->callback) 409 cmdptr->callback(mrioc, cmdptr); 410 } 411 } 412 out: 413 if (sense_buf) 414 mpi3mr_repost_sense_buf(mrioc, 415 le64_to_cpu(scsi_reply->sense_data_buffer_address)); 416 } 417 418 int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc) 419 { 420 u32 exp_phase = mrioc->admin_reply_ephase; 421 u32 admin_reply_ci = mrioc->admin_reply_ci; 422 u32 num_admin_replies = 0; 423 u64 reply_dma = 0; 424 struct mpi3_default_reply_descriptor *reply_desc; 425 426 if (!atomic_add_unless(&mrioc->admin_reply_q_in_use, 1, 1)) 427 return 0; 428 429 reply_desc = (struct mpi3_default_reply_descriptor *)mrioc->admin_reply_base + 430 admin_reply_ci; 431 432 if ((le16_to_cpu(reply_desc->reply_flags) & 433 MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) { 434 atomic_dec(&mrioc->admin_reply_q_in_use); 435 return 0; 436 } 437 438 do { 439 if (mrioc->unrecoverable) 440 break; 441 442 mrioc->admin_req_ci = le16_to_cpu(reply_desc->request_queue_ci); 443 mpi3mr_process_admin_reply_desc(mrioc, reply_desc, &reply_dma); 444 if (reply_dma) 445 mpi3mr_repost_reply_buf(mrioc, reply_dma); 446 num_admin_replies++; 447 if (++admin_reply_ci == mrioc->num_admin_replies) { 448 admin_reply_ci = 0; 449 exp_phase ^= 1; 450 } 451 reply_desc = 452 (struct mpi3_default_reply_descriptor *)mrioc->admin_reply_base + 453 admin_reply_ci; 454 if ((le16_to_cpu(reply_desc->reply_flags) & 455 MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) 456 break; 457 } while (1); 458 459 writel(admin_reply_ci, &mrioc->sysif_regs->admin_reply_queue_ci); 460 mrioc->admin_reply_ci = admin_reply_ci; 461 mrioc->admin_reply_ephase = exp_phase; 462 atomic_dec(&mrioc->admin_reply_q_in_use); 463 464 return num_admin_replies; 465 } 466 467 /** 468 * mpi3mr_get_reply_desc - get reply descriptor frame corresponding to 469 * queue's consumer index from operational reply descriptor queue. 470 * @op_reply_q: op_reply_qinfo object 471 * @reply_ci: operational reply descriptor's queue consumer index 472 * 473 * Returns reply descriptor frame address 474 */ 475 static inline struct mpi3_default_reply_descriptor * 476 mpi3mr_get_reply_desc(struct op_reply_qinfo *op_reply_q, u32 reply_ci) 477 { 478 void *segment_base_addr; 479 struct segments *segments = op_reply_q->q_segments; 480 struct mpi3_default_reply_descriptor *reply_desc = NULL; 481 482 segment_base_addr = 483 segments[reply_ci / op_reply_q->segment_qd].segment; 484 reply_desc = (struct mpi3_default_reply_descriptor *)segment_base_addr + 485 (reply_ci % op_reply_q->segment_qd); 486 return reply_desc; 487 } 488 489 /** 490 * mpi3mr_process_op_reply_q - Operational reply queue handler 491 * @mrioc: Adapter instance reference 492 * @op_reply_q: Operational reply queue info 493 * 494 * Checks the specific operational reply queue and drains the 495 * reply queue entries until the queue is empty and process the 496 * individual reply descriptors. 497 * 498 * Return: 0 if queue is already processed,or number of reply 499 * descriptors processed. 500 */ 501 int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc, 502 struct op_reply_qinfo *op_reply_q) 503 { 504 struct op_req_qinfo *op_req_q; 505 u32 exp_phase; 506 u32 reply_ci; 507 u32 num_op_reply = 0; 508 u64 reply_dma = 0; 509 struct mpi3_default_reply_descriptor *reply_desc; 510 u16 req_q_idx = 0, reply_qidx; 511 512 reply_qidx = op_reply_q->qid - 1; 513 514 if (!atomic_add_unless(&op_reply_q->in_use, 1, 1)) 515 return 0; 516 517 exp_phase = op_reply_q->ephase; 518 reply_ci = op_reply_q->ci; 519 520 reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci); 521 if ((le16_to_cpu(reply_desc->reply_flags) & 522 MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) { 523 atomic_dec(&op_reply_q->in_use); 524 return 0; 525 } 526 527 do { 528 if (mrioc->unrecoverable) 529 break; 530 531 req_q_idx = le16_to_cpu(reply_desc->request_queue_id) - 1; 532 op_req_q = &mrioc->req_qinfo[req_q_idx]; 533 534 WRITE_ONCE(op_req_q->ci, le16_to_cpu(reply_desc->request_queue_ci)); 535 mpi3mr_process_op_reply_desc(mrioc, reply_desc, &reply_dma, 536 reply_qidx); 537 atomic_dec(&op_reply_q->pend_ios); 538 if (reply_dma) 539 mpi3mr_repost_reply_buf(mrioc, reply_dma); 540 num_op_reply++; 541 542 if (++reply_ci == op_reply_q->num_replies) { 543 reply_ci = 0; 544 exp_phase ^= 1; 545 } 546 547 reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci); 548 549 if ((le16_to_cpu(reply_desc->reply_flags) & 550 MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) 551 break; 552 #ifndef CONFIG_PREEMPT_RT 553 /* 554 * Exit completion loop to avoid CPU lockup 555 * Ensure remaining completion happens from threaded ISR. 556 */ 557 if (num_op_reply > mrioc->max_host_ios) { 558 op_reply_q->enable_irq_poll = true; 559 break; 560 } 561 #endif 562 } while (1); 563 564 writel(reply_ci, 565 &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].consumer_index); 566 op_reply_q->ci = reply_ci; 567 op_reply_q->ephase = exp_phase; 568 569 atomic_dec(&op_reply_q->in_use); 570 return num_op_reply; 571 } 572 573 /** 574 * mpi3mr_blk_mq_poll - Operational reply queue handler 575 * @shost: SCSI Host reference 576 * @queue_num: Request queue number (w.r.t OS it is hardware context number) 577 * 578 * Checks the specific operational reply queue and drains the 579 * reply queue entries until the queue is empty and process the 580 * individual reply descriptors. 581 * 582 * Return: 0 if queue is already processed,or number of reply 583 * descriptors processed. 584 */ 585 int mpi3mr_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num) 586 { 587 int num_entries = 0; 588 struct mpi3mr_ioc *mrioc; 589 590 mrioc = (struct mpi3mr_ioc *)shost->hostdata; 591 592 if ((mrioc->reset_in_progress || mrioc->prepare_for_reset || 593 mrioc->unrecoverable)) 594 return 0; 595 596 num_entries = mpi3mr_process_op_reply_q(mrioc, 597 &mrioc->op_reply_qinfo[queue_num]); 598 599 return num_entries; 600 } 601 602 static irqreturn_t mpi3mr_isr_primary(int irq, void *privdata) 603 { 604 struct mpi3mr_intr_info *intr_info = privdata; 605 struct mpi3mr_ioc *mrioc; 606 u16 midx; 607 u32 num_admin_replies = 0, num_op_reply = 0; 608 609 if (!intr_info) 610 return IRQ_NONE; 611 612 mrioc = intr_info->mrioc; 613 614 if (!mrioc->intr_enabled) 615 return IRQ_NONE; 616 617 midx = intr_info->msix_index; 618 619 if (!midx) 620 num_admin_replies = mpi3mr_process_admin_reply_q(mrioc); 621 if (intr_info->op_reply_q) 622 num_op_reply = mpi3mr_process_op_reply_q(mrioc, 623 intr_info->op_reply_q); 624 625 if (num_admin_replies || num_op_reply) 626 return IRQ_HANDLED; 627 else 628 return IRQ_NONE; 629 } 630 631 #ifndef CONFIG_PREEMPT_RT 632 633 static irqreturn_t mpi3mr_isr(int irq, void *privdata) 634 { 635 struct mpi3mr_intr_info *intr_info = privdata; 636 int ret; 637 638 if (!intr_info) 639 return IRQ_NONE; 640 641 /* Call primary ISR routine */ 642 ret = mpi3mr_isr_primary(irq, privdata); 643 644 /* 645 * If more IOs are expected, schedule IRQ polling thread. 646 * Otherwise exit from ISR. 647 */ 648 if (!intr_info->op_reply_q) 649 return ret; 650 651 if (!intr_info->op_reply_q->enable_irq_poll || 652 !atomic_read(&intr_info->op_reply_q->pend_ios)) 653 return ret; 654 655 disable_irq_nosync(intr_info->os_irq); 656 657 return IRQ_WAKE_THREAD; 658 } 659 660 /** 661 * mpi3mr_isr_poll - Reply queue polling routine 662 * @irq: IRQ 663 * @privdata: Interrupt info 664 * 665 * poll for pending I/O completions in a loop until pending I/Os 666 * present or controller queue depth I/Os are processed. 667 * 668 * Return: IRQ_NONE or IRQ_HANDLED 669 */ 670 static irqreturn_t mpi3mr_isr_poll(int irq, void *privdata) 671 { 672 struct mpi3mr_intr_info *intr_info = privdata; 673 struct mpi3mr_ioc *mrioc; 674 u16 midx; 675 u32 num_op_reply = 0; 676 677 if (!intr_info || !intr_info->op_reply_q) 678 return IRQ_NONE; 679 680 mrioc = intr_info->mrioc; 681 midx = intr_info->msix_index; 682 683 /* Poll for pending IOs completions */ 684 do { 685 if (!mrioc->intr_enabled || mrioc->unrecoverable) 686 break; 687 688 if (!midx) 689 mpi3mr_process_admin_reply_q(mrioc); 690 if (intr_info->op_reply_q) 691 num_op_reply += 692 mpi3mr_process_op_reply_q(mrioc, 693 intr_info->op_reply_q); 694 695 usleep_range(MPI3MR_IRQ_POLL_SLEEP, 10 * MPI3MR_IRQ_POLL_SLEEP); 696 697 } while (atomic_read(&intr_info->op_reply_q->pend_ios) && 698 (num_op_reply < mrioc->max_host_ios)); 699 700 intr_info->op_reply_q->enable_irq_poll = false; 701 enable_irq(intr_info->os_irq); 702 703 return IRQ_HANDLED; 704 } 705 706 #endif 707 708 /** 709 * mpi3mr_request_irq - Request IRQ and register ISR 710 * @mrioc: Adapter instance reference 711 * @index: IRQ vector index 712 * 713 * Request threaded ISR with primary ISR and secondary 714 * 715 * Return: 0 on success and non zero on failures. 716 */ 717 static inline int mpi3mr_request_irq(struct mpi3mr_ioc *mrioc, u16 index) 718 { 719 struct pci_dev *pdev = mrioc->pdev; 720 struct mpi3mr_intr_info *intr_info = mrioc->intr_info + index; 721 int retval = 0; 722 723 intr_info->mrioc = mrioc; 724 intr_info->msix_index = index; 725 intr_info->op_reply_q = NULL; 726 727 snprintf(intr_info->name, MPI3MR_NAME_LENGTH, "%s%d-msix%d", 728 mrioc->driver_name, mrioc->id, index); 729 730 #ifndef CONFIG_PREEMPT_RT 731 retval = request_threaded_irq(pci_irq_vector(pdev, index), mpi3mr_isr, 732 mpi3mr_isr_poll, IRQF_SHARED, intr_info->name, intr_info); 733 #else 734 retval = request_threaded_irq(pci_irq_vector(pdev, index), mpi3mr_isr_primary, 735 NULL, IRQF_SHARED, intr_info->name, intr_info); 736 #endif 737 if (retval) { 738 ioc_err(mrioc, "%s: Unable to allocate interrupt %d!\n", 739 intr_info->name, pci_irq_vector(pdev, index)); 740 return retval; 741 } 742 743 intr_info->os_irq = pci_irq_vector(pdev, index); 744 return retval; 745 } 746 747 static void mpi3mr_calc_poll_queues(struct mpi3mr_ioc *mrioc, u16 max_vectors) 748 { 749 if (!mrioc->requested_poll_qcount) 750 return; 751 752 /* Reserved for Admin and Default Queue */ 753 if (max_vectors > 2 && 754 (mrioc->requested_poll_qcount < max_vectors - 2)) { 755 ioc_info(mrioc, 756 "enabled polled queues (%d) msix (%d)\n", 757 mrioc->requested_poll_qcount, max_vectors); 758 } else { 759 ioc_info(mrioc, 760 "disabled polled queues (%d) msix (%d) because of no resources for default queue\n", 761 mrioc->requested_poll_qcount, max_vectors); 762 mrioc->requested_poll_qcount = 0; 763 } 764 } 765 766 /** 767 * mpi3mr_setup_isr - Setup ISR for the controller 768 * @mrioc: Adapter instance reference 769 * @setup_one: Request one IRQ or more 770 * 771 * Allocate IRQ vectors and call mpi3mr_request_irq to setup ISR 772 * 773 * Return: 0 on success and non zero on failures. 774 */ 775 static int mpi3mr_setup_isr(struct mpi3mr_ioc *mrioc, u8 setup_one) 776 { 777 unsigned int irq_flags = PCI_IRQ_MSIX; 778 int max_vectors, min_vec; 779 int retval; 780 int i; 781 struct irq_affinity desc = { .pre_vectors = 1, .post_vectors = 1 }; 782 783 if (mrioc->is_intr_info_set) 784 return 0; 785 786 mpi3mr_cleanup_isr(mrioc); 787 788 if (setup_one || reset_devices) { 789 max_vectors = 1; 790 retval = pci_alloc_irq_vectors(mrioc->pdev, 791 1, max_vectors, irq_flags); 792 if (retval < 0) { 793 ioc_err(mrioc, "cannot allocate irq vectors, ret %d\n", 794 retval); 795 goto out_failed; 796 } 797 } else { 798 max_vectors = 799 min_t(int, mrioc->cpu_count + 1 + 800 mrioc->requested_poll_qcount, mrioc->msix_count); 801 802 mpi3mr_calc_poll_queues(mrioc, max_vectors); 803 804 ioc_info(mrioc, 805 "MSI-X vectors supported: %d, no of cores: %d,", 806 mrioc->msix_count, mrioc->cpu_count); 807 ioc_info(mrioc, 808 "MSI-x vectors requested: %d poll_queues %d\n", 809 max_vectors, mrioc->requested_poll_qcount); 810 811 desc.post_vectors = mrioc->requested_poll_qcount; 812 min_vec = desc.pre_vectors + desc.post_vectors; 813 irq_flags |= PCI_IRQ_AFFINITY | PCI_IRQ_ALL_TYPES; 814 815 retval = pci_alloc_irq_vectors_affinity(mrioc->pdev, 816 min_vec, max_vectors, irq_flags, &desc); 817 818 if (retval < 0) { 819 ioc_err(mrioc, "cannot allocate irq vectors, ret %d\n", 820 retval); 821 goto out_failed; 822 } 823 824 825 /* 826 * If only one MSI-x is allocated, then MSI-x 0 will be shared 827 * between Admin queue and operational queue 828 */ 829 if (retval == min_vec) 830 mrioc->op_reply_q_offset = 0; 831 else if (retval != (max_vectors)) { 832 ioc_info(mrioc, 833 "allocated vectors (%d) are less than configured (%d)\n", 834 retval, max_vectors); 835 } 836 837 max_vectors = retval; 838 mrioc->op_reply_q_offset = (max_vectors > 1) ? 1 : 0; 839 840 mpi3mr_calc_poll_queues(mrioc, max_vectors); 841 842 } 843 844 mrioc->intr_info = kzalloc(sizeof(struct mpi3mr_intr_info) * max_vectors, 845 GFP_KERNEL); 846 if (!mrioc->intr_info) { 847 retval = -ENOMEM; 848 pci_free_irq_vectors(mrioc->pdev); 849 goto out_failed; 850 } 851 for (i = 0; i < max_vectors; i++) { 852 retval = mpi3mr_request_irq(mrioc, i); 853 if (retval) { 854 mrioc->intr_info_count = i; 855 goto out_failed; 856 } 857 } 858 if (reset_devices || !setup_one) 859 mrioc->is_intr_info_set = true; 860 mrioc->intr_info_count = max_vectors; 861 mpi3mr_ioc_enable_intr(mrioc); 862 return 0; 863 864 out_failed: 865 mpi3mr_cleanup_isr(mrioc); 866 867 return retval; 868 } 869 870 static const struct { 871 enum mpi3mr_iocstate value; 872 char *name; 873 } mrioc_states[] = { 874 { MRIOC_STATE_READY, "ready" }, 875 { MRIOC_STATE_FAULT, "fault" }, 876 { MRIOC_STATE_RESET, "reset" }, 877 { MRIOC_STATE_BECOMING_READY, "becoming ready" }, 878 { MRIOC_STATE_RESET_REQUESTED, "reset requested" }, 879 { MRIOC_STATE_UNRECOVERABLE, "unrecoverable error" }, 880 }; 881 882 static const char *mpi3mr_iocstate_name(enum mpi3mr_iocstate mrioc_state) 883 { 884 int i; 885 char *name = NULL; 886 887 for (i = 0; i < ARRAY_SIZE(mrioc_states); i++) { 888 if (mrioc_states[i].value == mrioc_state) { 889 name = mrioc_states[i].name; 890 break; 891 } 892 } 893 return name; 894 } 895 896 /* Reset reason to name mapper structure*/ 897 static const struct { 898 enum mpi3mr_reset_reason value; 899 char *name; 900 } mpi3mr_reset_reason_codes[] = { 901 { MPI3MR_RESET_FROM_BRINGUP, "timeout in bringup" }, 902 { MPI3MR_RESET_FROM_FAULT_WATCH, "fault" }, 903 { MPI3MR_RESET_FROM_APP, "application invocation" }, 904 { MPI3MR_RESET_FROM_EH_HOS, "error handling" }, 905 { MPI3MR_RESET_FROM_TM_TIMEOUT, "TM timeout" }, 906 { MPI3MR_RESET_FROM_APP_TIMEOUT, "application command timeout" }, 907 { MPI3MR_RESET_FROM_MUR_FAILURE, "MUR failure" }, 908 { MPI3MR_RESET_FROM_CTLR_CLEANUP, "timeout in controller cleanup" }, 909 { MPI3MR_RESET_FROM_CIACTIV_FAULT, "component image activation fault" }, 910 { MPI3MR_RESET_FROM_PE_TIMEOUT, "port enable timeout" }, 911 { MPI3MR_RESET_FROM_TSU_TIMEOUT, "time stamp update timeout" }, 912 { MPI3MR_RESET_FROM_DELREQQ_TIMEOUT, "delete request queue timeout" }, 913 { MPI3MR_RESET_FROM_DELREPQ_TIMEOUT, "delete reply queue timeout" }, 914 { 915 MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT, 916 "create request queue timeout" 917 }, 918 { 919 MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT, 920 "create reply queue timeout" 921 }, 922 { MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT, "IOC facts timeout" }, 923 { MPI3MR_RESET_FROM_IOCINIT_TIMEOUT, "IOC init timeout" }, 924 { MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT, "event notify timeout" }, 925 { MPI3MR_RESET_FROM_EVTACK_TIMEOUT, "event acknowledgment timeout" }, 926 { 927 MPI3MR_RESET_FROM_CIACTVRST_TIMER, 928 "component image activation timeout" 929 }, 930 { 931 MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT, 932 "get package version timeout" 933 }, 934 { MPI3MR_RESET_FROM_SYSFS, "sysfs invocation" }, 935 { MPI3MR_RESET_FROM_SYSFS_TIMEOUT, "sysfs TM timeout" }, 936 { MPI3MR_RESET_FROM_FIRMWARE, "firmware asynchronous reset" }, 937 { MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT, "configuration request timeout"}, 938 { MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT, "timeout of a SAS transport layer request" }, 939 }; 940 941 /** 942 * mpi3mr_reset_rc_name - get reset reason code name 943 * @reason_code: reset reason code value 944 * 945 * Map reset reason to an NULL terminated ASCII string 946 * 947 * Return: name corresponding to reset reason value or NULL. 948 */ 949 static const char *mpi3mr_reset_rc_name(enum mpi3mr_reset_reason reason_code) 950 { 951 int i; 952 char *name = NULL; 953 954 for (i = 0; i < ARRAY_SIZE(mpi3mr_reset_reason_codes); i++) { 955 if (mpi3mr_reset_reason_codes[i].value == reason_code) { 956 name = mpi3mr_reset_reason_codes[i].name; 957 break; 958 } 959 } 960 return name; 961 } 962 963 /* Reset type to name mapper structure*/ 964 static const struct { 965 u16 reset_type; 966 char *name; 967 } mpi3mr_reset_types[] = { 968 { MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, "soft" }, 969 { MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, "diag fault" }, 970 }; 971 972 /** 973 * mpi3mr_reset_type_name - get reset type name 974 * @reset_type: reset type value 975 * 976 * Map reset type to an NULL terminated ASCII string 977 * 978 * Return: name corresponding to reset type value or NULL. 979 */ 980 static const char *mpi3mr_reset_type_name(u16 reset_type) 981 { 982 int i; 983 char *name = NULL; 984 985 for (i = 0; i < ARRAY_SIZE(mpi3mr_reset_types); i++) { 986 if (mpi3mr_reset_types[i].reset_type == reset_type) { 987 name = mpi3mr_reset_types[i].name; 988 break; 989 } 990 } 991 return name; 992 } 993 994 /** 995 * mpi3mr_print_fault_info - Display fault information 996 * @mrioc: Adapter instance reference 997 * 998 * Display the controller fault information if there is a 999 * controller fault. 1000 * 1001 * Return: Nothing. 1002 */ 1003 void mpi3mr_print_fault_info(struct mpi3mr_ioc *mrioc) 1004 { 1005 u32 ioc_status, code, code1, code2, code3; 1006 1007 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 1008 1009 if (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) { 1010 code = readl(&mrioc->sysif_regs->fault); 1011 code1 = readl(&mrioc->sysif_regs->fault_info[0]); 1012 code2 = readl(&mrioc->sysif_regs->fault_info[1]); 1013 code3 = readl(&mrioc->sysif_regs->fault_info[2]); 1014 1015 ioc_info(mrioc, 1016 "fault code(0x%08X): Additional code: (0x%08X:0x%08X:0x%08X)\n", 1017 code, code1, code2, code3); 1018 } 1019 } 1020 1021 /** 1022 * mpi3mr_get_iocstate - Get IOC State 1023 * @mrioc: Adapter instance reference 1024 * 1025 * Return a proper IOC state enum based on the IOC status and 1026 * IOC configuration and unrcoverable state of the controller. 1027 * 1028 * Return: Current IOC state. 1029 */ 1030 enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc) 1031 { 1032 u32 ioc_status, ioc_config; 1033 u8 ready, enabled; 1034 1035 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 1036 ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); 1037 1038 if (mrioc->unrecoverable) 1039 return MRIOC_STATE_UNRECOVERABLE; 1040 if (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) 1041 return MRIOC_STATE_FAULT; 1042 1043 ready = (ioc_status & MPI3_SYSIF_IOC_STATUS_READY); 1044 enabled = (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC); 1045 1046 if (ready && enabled) 1047 return MRIOC_STATE_READY; 1048 if ((!ready) && (!enabled)) 1049 return MRIOC_STATE_RESET; 1050 if ((!ready) && (enabled)) 1051 return MRIOC_STATE_BECOMING_READY; 1052 1053 return MRIOC_STATE_RESET_REQUESTED; 1054 } 1055 1056 /** 1057 * mpi3mr_clear_reset_history - clear reset history 1058 * @mrioc: Adapter instance reference 1059 * 1060 * Write the reset history bit in IOC status to clear the bit, 1061 * if it is already set. 1062 * 1063 * Return: Nothing. 1064 */ 1065 static inline void mpi3mr_clear_reset_history(struct mpi3mr_ioc *mrioc) 1066 { 1067 u32 ioc_status; 1068 1069 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 1070 if (ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) 1071 writel(ioc_status, &mrioc->sysif_regs->ioc_status); 1072 } 1073 1074 /** 1075 * mpi3mr_issue_and_process_mur - Message unit Reset handler 1076 * @mrioc: Adapter instance reference 1077 * @reset_reason: Reset reason code 1078 * 1079 * Issue Message unit Reset to the controller and wait for it to 1080 * be complete. 1081 * 1082 * Return: 0 on success, -1 on failure. 1083 */ 1084 static int mpi3mr_issue_and_process_mur(struct mpi3mr_ioc *mrioc, 1085 u32 reset_reason) 1086 { 1087 u32 ioc_config, timeout, ioc_status; 1088 int retval = -1; 1089 1090 ioc_info(mrioc, "Issuing Message unit Reset(MUR)\n"); 1091 if (mrioc->unrecoverable) { 1092 ioc_info(mrioc, "IOC is unrecoverable MUR not issued\n"); 1093 return retval; 1094 } 1095 mpi3mr_clear_reset_history(mrioc); 1096 writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]); 1097 ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); 1098 ioc_config &= ~MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC; 1099 writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); 1100 1101 timeout = MPI3MR_MUR_TIMEOUT * 10; 1102 do { 1103 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 1104 if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY)) { 1105 mpi3mr_clear_reset_history(mrioc); 1106 break; 1107 } 1108 if (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) { 1109 mpi3mr_print_fault_info(mrioc); 1110 break; 1111 } 1112 msleep(100); 1113 } while (--timeout); 1114 1115 ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); 1116 if (timeout && !((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) || 1117 (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) || 1118 (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC))) 1119 retval = 0; 1120 1121 ioc_info(mrioc, "Base IOC Sts/Config after %s MUR is (0x%x)/(0x%x)\n", 1122 (!retval) ? "successful" : "failed", ioc_status, ioc_config); 1123 return retval; 1124 } 1125 1126 /** 1127 * mpi3mr_revalidate_factsdata - validate IOCFacts parameters 1128 * during reset/resume 1129 * @mrioc: Adapter instance reference 1130 * 1131 * Return zero if the new IOCFacts parameters value is compatible with 1132 * older values else return -EPERM 1133 */ 1134 static int 1135 mpi3mr_revalidate_factsdata(struct mpi3mr_ioc *mrioc) 1136 { 1137 void *removepend_bitmap; 1138 1139 if (mrioc->facts.reply_sz > mrioc->reply_sz) { 1140 ioc_err(mrioc, 1141 "cannot increase reply size from %d to %d\n", 1142 mrioc->reply_sz, mrioc->facts.reply_sz); 1143 return -EPERM; 1144 } 1145 1146 if (mrioc->facts.max_op_reply_q < mrioc->num_op_reply_q) { 1147 ioc_err(mrioc, 1148 "cannot reduce number of operational reply queues from %d to %d\n", 1149 mrioc->num_op_reply_q, 1150 mrioc->facts.max_op_reply_q); 1151 return -EPERM; 1152 } 1153 1154 if (mrioc->facts.max_op_req_q < mrioc->num_op_req_q) { 1155 ioc_err(mrioc, 1156 "cannot reduce number of operational request queues from %d to %d\n", 1157 mrioc->num_op_req_q, mrioc->facts.max_op_req_q); 1158 return -EPERM; 1159 } 1160 1161 if ((mrioc->sas_transport_enabled) && (mrioc->facts.ioc_capabilities & 1162 MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED)) 1163 ioc_err(mrioc, 1164 "critical error: multipath capability is enabled at the\n" 1165 "\tcontroller while sas transport support is enabled at the\n" 1166 "\tdriver, please reboot the system or reload the driver\n"); 1167 1168 if (mrioc->facts.max_devhandle > mrioc->dev_handle_bitmap_bits) { 1169 removepend_bitmap = bitmap_zalloc(mrioc->facts.max_devhandle, 1170 GFP_KERNEL); 1171 if (!removepend_bitmap) { 1172 ioc_err(mrioc, 1173 "failed to increase removepend_bitmap bits from %d to %d\n", 1174 mrioc->dev_handle_bitmap_bits, 1175 mrioc->facts.max_devhandle); 1176 return -EPERM; 1177 } 1178 bitmap_free(mrioc->removepend_bitmap); 1179 mrioc->removepend_bitmap = removepend_bitmap; 1180 ioc_info(mrioc, 1181 "increased bits of dev_handle_bitmap from %d to %d\n", 1182 mrioc->dev_handle_bitmap_bits, 1183 mrioc->facts.max_devhandle); 1184 mrioc->dev_handle_bitmap_bits = mrioc->facts.max_devhandle; 1185 } 1186 1187 return 0; 1188 } 1189 1190 /** 1191 * mpi3mr_bring_ioc_ready - Bring controller to ready state 1192 * @mrioc: Adapter instance reference 1193 * 1194 * Set Enable IOC bit in IOC configuration register and wait for 1195 * the controller to become ready. 1196 * 1197 * Return: 0 on success, appropriate error on failure. 1198 */ 1199 static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc) 1200 { 1201 u32 ioc_config, ioc_status, timeout, host_diagnostic; 1202 int retval = 0; 1203 enum mpi3mr_iocstate ioc_state; 1204 u64 base_info; 1205 1206 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 1207 ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); 1208 base_info = lo_hi_readq(&mrioc->sysif_regs->ioc_information); 1209 ioc_info(mrioc, "ioc_status(0x%08x), ioc_config(0x%08x), ioc_info(0x%016llx) at the bringup\n", 1210 ioc_status, ioc_config, base_info); 1211 1212 /*The timeout value is in 2sec unit, changing it to seconds*/ 1213 mrioc->ready_timeout = 1214 ((base_info & MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_MASK) >> 1215 MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_SHIFT) * 2; 1216 1217 ioc_info(mrioc, "ready timeout: %d seconds\n", mrioc->ready_timeout); 1218 1219 ioc_state = mpi3mr_get_iocstate(mrioc); 1220 ioc_info(mrioc, "controller is in %s state during detection\n", 1221 mpi3mr_iocstate_name(ioc_state)); 1222 1223 if (ioc_state == MRIOC_STATE_BECOMING_READY || 1224 ioc_state == MRIOC_STATE_RESET_REQUESTED) { 1225 timeout = mrioc->ready_timeout * 10; 1226 do { 1227 msleep(100); 1228 } while (--timeout); 1229 1230 if (!pci_device_is_present(mrioc->pdev)) { 1231 mrioc->unrecoverable = 1; 1232 ioc_err(mrioc, 1233 "controller is not present while waiting to reset\n"); 1234 retval = -1; 1235 goto out_device_not_present; 1236 } 1237 1238 ioc_state = mpi3mr_get_iocstate(mrioc); 1239 ioc_info(mrioc, 1240 "controller is in %s state after waiting to reset\n", 1241 mpi3mr_iocstate_name(ioc_state)); 1242 } 1243 1244 if (ioc_state == MRIOC_STATE_READY) { 1245 ioc_info(mrioc, "issuing message unit reset (MUR) to bring to reset state\n"); 1246 retval = mpi3mr_issue_and_process_mur(mrioc, 1247 MPI3MR_RESET_FROM_BRINGUP); 1248 ioc_state = mpi3mr_get_iocstate(mrioc); 1249 if (retval) 1250 ioc_err(mrioc, 1251 "message unit reset failed with error %d current state %s\n", 1252 retval, mpi3mr_iocstate_name(ioc_state)); 1253 } 1254 if (ioc_state != MRIOC_STATE_RESET) { 1255 if (ioc_state == MRIOC_STATE_FAULT) { 1256 timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10; 1257 mpi3mr_print_fault_info(mrioc); 1258 do { 1259 host_diagnostic = 1260 readl(&mrioc->sysif_regs->host_diagnostic); 1261 if (!(host_diagnostic & 1262 MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS)) 1263 break; 1264 if (!pci_device_is_present(mrioc->pdev)) { 1265 mrioc->unrecoverable = 1; 1266 ioc_err(mrioc, "controller is not present at the bringup\n"); 1267 goto out_device_not_present; 1268 } 1269 msleep(100); 1270 } while (--timeout); 1271 } 1272 mpi3mr_print_fault_info(mrioc); 1273 ioc_info(mrioc, "issuing soft reset to bring to reset state\n"); 1274 retval = mpi3mr_issue_reset(mrioc, 1275 MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, 1276 MPI3MR_RESET_FROM_BRINGUP); 1277 if (retval) { 1278 ioc_err(mrioc, 1279 "soft reset failed with error %d\n", retval); 1280 goto out_failed; 1281 } 1282 } 1283 ioc_state = mpi3mr_get_iocstate(mrioc); 1284 if (ioc_state != MRIOC_STATE_RESET) { 1285 ioc_err(mrioc, 1286 "cannot bring controller to reset state, current state: %s\n", 1287 mpi3mr_iocstate_name(ioc_state)); 1288 goto out_failed; 1289 } 1290 mpi3mr_clear_reset_history(mrioc); 1291 retval = mpi3mr_setup_admin_qpair(mrioc); 1292 if (retval) { 1293 ioc_err(mrioc, "failed to setup admin queues: error %d\n", 1294 retval); 1295 goto out_failed; 1296 } 1297 1298 ioc_info(mrioc, "bringing controller to ready state\n"); 1299 ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); 1300 ioc_config |= MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC; 1301 writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); 1302 1303 timeout = mrioc->ready_timeout * 10; 1304 do { 1305 ioc_state = mpi3mr_get_iocstate(mrioc); 1306 if (ioc_state == MRIOC_STATE_READY) { 1307 ioc_info(mrioc, 1308 "successfully transitioned to %s state\n", 1309 mpi3mr_iocstate_name(ioc_state)); 1310 return 0; 1311 } 1312 if (!pci_device_is_present(mrioc->pdev)) { 1313 mrioc->unrecoverable = 1; 1314 ioc_err(mrioc, 1315 "controller is not present at the bringup\n"); 1316 retval = -1; 1317 goto out_device_not_present; 1318 } 1319 msleep(100); 1320 } while (--timeout); 1321 1322 out_failed: 1323 ioc_state = mpi3mr_get_iocstate(mrioc); 1324 ioc_err(mrioc, 1325 "failed to bring to ready state, current state: %s\n", 1326 mpi3mr_iocstate_name(ioc_state)); 1327 out_device_not_present: 1328 return retval; 1329 } 1330 1331 /** 1332 * mpi3mr_soft_reset_success - Check softreset is success or not 1333 * @ioc_status: IOC status register value 1334 * @ioc_config: IOC config register value 1335 * 1336 * Check whether the soft reset is successful or not based on 1337 * IOC status and IOC config register values. 1338 * 1339 * Return: True when the soft reset is success, false otherwise. 1340 */ 1341 static inline bool 1342 mpi3mr_soft_reset_success(u32 ioc_status, u32 ioc_config) 1343 { 1344 if (!((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) || 1345 (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC))) 1346 return true; 1347 return false; 1348 } 1349 1350 /** 1351 * mpi3mr_diagfault_success - Check diag fault is success or not 1352 * @mrioc: Adapter reference 1353 * @ioc_status: IOC status register value 1354 * 1355 * Check whether the controller hit diag reset fault code. 1356 * 1357 * Return: True when there is diag fault, false otherwise. 1358 */ 1359 static inline bool mpi3mr_diagfault_success(struct mpi3mr_ioc *mrioc, 1360 u32 ioc_status) 1361 { 1362 u32 fault; 1363 1364 if (!(ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT)) 1365 return false; 1366 fault = readl(&mrioc->sysif_regs->fault) & MPI3_SYSIF_FAULT_CODE_MASK; 1367 if (fault == MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET) { 1368 mpi3mr_print_fault_info(mrioc); 1369 return true; 1370 } 1371 return false; 1372 } 1373 1374 /** 1375 * mpi3mr_set_diagsave - Set diag save bit for snapdump 1376 * @mrioc: Adapter reference 1377 * 1378 * Set diag save bit in IOC configuration register to enable 1379 * snapdump. 1380 * 1381 * Return: Nothing. 1382 */ 1383 static inline void mpi3mr_set_diagsave(struct mpi3mr_ioc *mrioc) 1384 { 1385 u32 ioc_config; 1386 1387 ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); 1388 ioc_config |= MPI3_SYSIF_IOC_CONFIG_DIAG_SAVE; 1389 writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); 1390 } 1391 1392 /** 1393 * mpi3mr_issue_reset - Issue reset to the controller 1394 * @mrioc: Adapter reference 1395 * @reset_type: Reset type 1396 * @reset_reason: Reset reason code 1397 * 1398 * Unlock the host diagnostic registers and write the specific 1399 * reset type to that, wait for reset acknowledgment from the 1400 * controller, if the reset is not successful retry for the 1401 * predefined number of times. 1402 * 1403 * Return: 0 on success, non-zero on failure. 1404 */ 1405 static int mpi3mr_issue_reset(struct mpi3mr_ioc *mrioc, u16 reset_type, 1406 u32 reset_reason) 1407 { 1408 int retval = -1; 1409 u8 unlock_retry_count = 0; 1410 u32 host_diagnostic, ioc_status, ioc_config; 1411 u32 timeout = MPI3MR_RESET_ACK_TIMEOUT * 10; 1412 1413 if ((reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET) && 1414 (reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT)) 1415 return retval; 1416 if (mrioc->unrecoverable) 1417 return retval; 1418 if (reset_reason == MPI3MR_RESET_FROM_FIRMWARE) { 1419 retval = 0; 1420 return retval; 1421 } 1422 1423 ioc_info(mrioc, "%s reset due to %s(0x%x)\n", 1424 mpi3mr_reset_type_name(reset_type), 1425 mpi3mr_reset_rc_name(reset_reason), reset_reason); 1426 1427 mpi3mr_clear_reset_history(mrioc); 1428 do { 1429 ioc_info(mrioc, 1430 "Write magic sequence to unlock host diag register (retry=%d)\n", 1431 ++unlock_retry_count); 1432 if (unlock_retry_count >= MPI3MR_HOSTDIAG_UNLOCK_RETRY_COUNT) { 1433 ioc_err(mrioc, 1434 "%s reset failed due to unlock failure, host_diagnostic(0x%08x)\n", 1435 mpi3mr_reset_type_name(reset_type), 1436 host_diagnostic); 1437 mrioc->unrecoverable = 1; 1438 return retval; 1439 } 1440 1441 writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH, 1442 &mrioc->sysif_regs->write_sequence); 1443 writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_1ST, 1444 &mrioc->sysif_regs->write_sequence); 1445 writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND, 1446 &mrioc->sysif_regs->write_sequence); 1447 writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_3RD, 1448 &mrioc->sysif_regs->write_sequence); 1449 writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_4TH, 1450 &mrioc->sysif_regs->write_sequence); 1451 writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_5TH, 1452 &mrioc->sysif_regs->write_sequence); 1453 writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_6TH, 1454 &mrioc->sysif_regs->write_sequence); 1455 usleep_range(1000, 1100); 1456 host_diagnostic = readl(&mrioc->sysif_regs->host_diagnostic); 1457 ioc_info(mrioc, 1458 "wrote magic sequence: retry_count(%d), host_diagnostic(0x%08x)\n", 1459 unlock_retry_count, host_diagnostic); 1460 } while (!(host_diagnostic & MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE)); 1461 1462 writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]); 1463 writel(host_diagnostic | reset_type, 1464 &mrioc->sysif_regs->host_diagnostic); 1465 switch (reset_type) { 1466 case MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET: 1467 do { 1468 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 1469 ioc_config = 1470 readl(&mrioc->sysif_regs->ioc_configuration); 1471 if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) 1472 && mpi3mr_soft_reset_success(ioc_status, ioc_config) 1473 ) { 1474 mpi3mr_clear_reset_history(mrioc); 1475 retval = 0; 1476 break; 1477 } 1478 msleep(100); 1479 } while (--timeout); 1480 mpi3mr_print_fault_info(mrioc); 1481 break; 1482 case MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT: 1483 do { 1484 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 1485 if (mpi3mr_diagfault_success(mrioc, ioc_status)) { 1486 retval = 0; 1487 break; 1488 } 1489 msleep(100); 1490 } while (--timeout); 1491 break; 1492 default: 1493 break; 1494 } 1495 1496 writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND, 1497 &mrioc->sysif_regs->write_sequence); 1498 1499 ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); 1500 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 1501 ioc_info(mrioc, 1502 "ioc_status/ioc_onfig after %s reset is (0x%x)/(0x%x)\n", 1503 (!retval)?"successful":"failed", ioc_status, 1504 ioc_config); 1505 if (retval) 1506 mrioc->unrecoverable = 1; 1507 return retval; 1508 } 1509 1510 /** 1511 * mpi3mr_admin_request_post - Post request to admin queue 1512 * @mrioc: Adapter reference 1513 * @admin_req: MPI3 request 1514 * @admin_req_sz: Request size 1515 * @ignore_reset: Ignore reset in process 1516 * 1517 * Post the MPI3 request into admin request queue and 1518 * inform the controller, if the queue is full return 1519 * appropriate error. 1520 * 1521 * Return: 0 on success, non-zero on failure. 1522 */ 1523 int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req, 1524 u16 admin_req_sz, u8 ignore_reset) 1525 { 1526 u16 areq_pi = 0, areq_ci = 0, max_entries = 0; 1527 int retval = 0; 1528 unsigned long flags; 1529 u8 *areq_entry; 1530 1531 if (mrioc->unrecoverable) { 1532 ioc_err(mrioc, "%s : Unrecoverable controller\n", __func__); 1533 return -EFAULT; 1534 } 1535 1536 spin_lock_irqsave(&mrioc->admin_req_lock, flags); 1537 areq_pi = mrioc->admin_req_pi; 1538 areq_ci = mrioc->admin_req_ci; 1539 max_entries = mrioc->num_admin_req; 1540 if ((areq_ci == (areq_pi + 1)) || ((!areq_ci) && 1541 (areq_pi == (max_entries - 1)))) { 1542 ioc_err(mrioc, "AdminReqQ full condition detected\n"); 1543 retval = -EAGAIN; 1544 goto out; 1545 } 1546 if (!ignore_reset && mrioc->reset_in_progress) { 1547 ioc_err(mrioc, "AdminReqQ submit reset in progress\n"); 1548 retval = -EAGAIN; 1549 goto out; 1550 } 1551 areq_entry = (u8 *)mrioc->admin_req_base + 1552 (areq_pi * MPI3MR_ADMIN_REQ_FRAME_SZ); 1553 memset(areq_entry, 0, MPI3MR_ADMIN_REQ_FRAME_SZ); 1554 memcpy(areq_entry, (u8 *)admin_req, admin_req_sz); 1555 1556 if (++areq_pi == max_entries) 1557 areq_pi = 0; 1558 mrioc->admin_req_pi = areq_pi; 1559 1560 writel(mrioc->admin_req_pi, &mrioc->sysif_regs->admin_request_queue_pi); 1561 1562 out: 1563 spin_unlock_irqrestore(&mrioc->admin_req_lock, flags); 1564 1565 return retval; 1566 } 1567 1568 /** 1569 * mpi3mr_free_op_req_q_segments - free request memory segments 1570 * @mrioc: Adapter instance reference 1571 * @q_idx: operational request queue index 1572 * 1573 * Free memory segments allocated for operational request queue 1574 * 1575 * Return: Nothing. 1576 */ 1577 static void mpi3mr_free_op_req_q_segments(struct mpi3mr_ioc *mrioc, u16 q_idx) 1578 { 1579 u16 j; 1580 int size; 1581 struct segments *segments; 1582 1583 segments = mrioc->req_qinfo[q_idx].q_segments; 1584 if (!segments) 1585 return; 1586 1587 if (mrioc->enable_segqueue) { 1588 size = MPI3MR_OP_REQ_Q_SEG_SIZE; 1589 if (mrioc->req_qinfo[q_idx].q_segment_list) { 1590 dma_free_coherent(&mrioc->pdev->dev, 1591 MPI3MR_MAX_SEG_LIST_SIZE, 1592 mrioc->req_qinfo[q_idx].q_segment_list, 1593 mrioc->req_qinfo[q_idx].q_segment_list_dma); 1594 mrioc->req_qinfo[q_idx].q_segment_list = NULL; 1595 } 1596 } else 1597 size = mrioc->req_qinfo[q_idx].segment_qd * 1598 mrioc->facts.op_req_sz; 1599 1600 for (j = 0; j < mrioc->req_qinfo[q_idx].num_segments; j++) { 1601 if (!segments[j].segment) 1602 continue; 1603 dma_free_coherent(&mrioc->pdev->dev, 1604 size, segments[j].segment, segments[j].segment_dma); 1605 segments[j].segment = NULL; 1606 } 1607 kfree(mrioc->req_qinfo[q_idx].q_segments); 1608 mrioc->req_qinfo[q_idx].q_segments = NULL; 1609 mrioc->req_qinfo[q_idx].qid = 0; 1610 } 1611 1612 /** 1613 * mpi3mr_free_op_reply_q_segments - free reply memory segments 1614 * @mrioc: Adapter instance reference 1615 * @q_idx: operational reply queue index 1616 * 1617 * Free memory segments allocated for operational reply queue 1618 * 1619 * Return: Nothing. 1620 */ 1621 static void mpi3mr_free_op_reply_q_segments(struct mpi3mr_ioc *mrioc, u16 q_idx) 1622 { 1623 u16 j; 1624 int size; 1625 struct segments *segments; 1626 1627 segments = mrioc->op_reply_qinfo[q_idx].q_segments; 1628 if (!segments) 1629 return; 1630 1631 if (mrioc->enable_segqueue) { 1632 size = MPI3MR_OP_REP_Q_SEG_SIZE; 1633 if (mrioc->op_reply_qinfo[q_idx].q_segment_list) { 1634 dma_free_coherent(&mrioc->pdev->dev, 1635 MPI3MR_MAX_SEG_LIST_SIZE, 1636 mrioc->op_reply_qinfo[q_idx].q_segment_list, 1637 mrioc->op_reply_qinfo[q_idx].q_segment_list_dma); 1638 mrioc->op_reply_qinfo[q_idx].q_segment_list = NULL; 1639 } 1640 } else 1641 size = mrioc->op_reply_qinfo[q_idx].segment_qd * 1642 mrioc->op_reply_desc_sz; 1643 1644 for (j = 0; j < mrioc->op_reply_qinfo[q_idx].num_segments; j++) { 1645 if (!segments[j].segment) 1646 continue; 1647 dma_free_coherent(&mrioc->pdev->dev, 1648 size, segments[j].segment, segments[j].segment_dma); 1649 segments[j].segment = NULL; 1650 } 1651 1652 kfree(mrioc->op_reply_qinfo[q_idx].q_segments); 1653 mrioc->op_reply_qinfo[q_idx].q_segments = NULL; 1654 mrioc->op_reply_qinfo[q_idx].qid = 0; 1655 } 1656 1657 /** 1658 * mpi3mr_delete_op_reply_q - delete operational reply queue 1659 * @mrioc: Adapter instance reference 1660 * @qidx: operational reply queue index 1661 * 1662 * Delete operatinal reply queue by issuing MPI request 1663 * through admin queue. 1664 * 1665 * Return: 0 on success, non-zero on failure. 1666 */ 1667 static int mpi3mr_delete_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx) 1668 { 1669 struct mpi3_delete_reply_queue_request delq_req; 1670 struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx; 1671 int retval = 0; 1672 u16 reply_qid = 0, midx; 1673 1674 reply_qid = op_reply_q->qid; 1675 1676 midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, mrioc->op_reply_q_offset); 1677 1678 if (!reply_qid) { 1679 retval = -1; 1680 ioc_err(mrioc, "Issue DelRepQ: called with invalid ReqQID\n"); 1681 goto out; 1682 } 1683 1684 (op_reply_q->qtype == MPI3MR_DEFAULT_QUEUE) ? mrioc->default_qcount-- : 1685 mrioc->active_poll_qcount--; 1686 1687 memset(&delq_req, 0, sizeof(delq_req)); 1688 mutex_lock(&mrioc->init_cmds.mutex); 1689 if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { 1690 retval = -1; 1691 ioc_err(mrioc, "Issue DelRepQ: Init command is in use\n"); 1692 mutex_unlock(&mrioc->init_cmds.mutex); 1693 goto out; 1694 } 1695 mrioc->init_cmds.state = MPI3MR_CMD_PENDING; 1696 mrioc->init_cmds.is_waiting = 1; 1697 mrioc->init_cmds.callback = NULL; 1698 delq_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); 1699 delq_req.function = MPI3_FUNCTION_DELETE_REPLY_QUEUE; 1700 delq_req.queue_id = cpu_to_le16(reply_qid); 1701 1702 init_completion(&mrioc->init_cmds.done); 1703 retval = mpi3mr_admin_request_post(mrioc, &delq_req, sizeof(delq_req), 1704 1); 1705 if (retval) { 1706 ioc_err(mrioc, "Issue DelRepQ: Admin Post failed\n"); 1707 goto out_unlock; 1708 } 1709 wait_for_completion_timeout(&mrioc->init_cmds.done, 1710 (MPI3MR_INTADMCMD_TIMEOUT * HZ)); 1711 if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { 1712 ioc_err(mrioc, "delete reply queue timed out\n"); 1713 mpi3mr_check_rh_fault_ioc(mrioc, 1714 MPI3MR_RESET_FROM_DELREPQ_TIMEOUT); 1715 retval = -1; 1716 goto out_unlock; 1717 } 1718 if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) 1719 != MPI3_IOCSTATUS_SUCCESS) { 1720 ioc_err(mrioc, 1721 "Issue DelRepQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", 1722 (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), 1723 mrioc->init_cmds.ioc_loginfo); 1724 retval = -1; 1725 goto out_unlock; 1726 } 1727 mrioc->intr_info[midx].op_reply_q = NULL; 1728 1729 mpi3mr_free_op_reply_q_segments(mrioc, qidx); 1730 out_unlock: 1731 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 1732 mutex_unlock(&mrioc->init_cmds.mutex); 1733 out: 1734 1735 return retval; 1736 } 1737 1738 /** 1739 * mpi3mr_alloc_op_reply_q_segments -Alloc segmented reply pool 1740 * @mrioc: Adapter instance reference 1741 * @qidx: request queue index 1742 * 1743 * Allocate segmented memory pools for operational reply 1744 * queue. 1745 * 1746 * Return: 0 on success, non-zero on failure. 1747 */ 1748 static int mpi3mr_alloc_op_reply_q_segments(struct mpi3mr_ioc *mrioc, u16 qidx) 1749 { 1750 struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx; 1751 int i, size; 1752 u64 *q_segment_list_entry = NULL; 1753 struct segments *segments; 1754 1755 if (mrioc->enable_segqueue) { 1756 op_reply_q->segment_qd = 1757 MPI3MR_OP_REP_Q_SEG_SIZE / mrioc->op_reply_desc_sz; 1758 1759 size = MPI3MR_OP_REP_Q_SEG_SIZE; 1760 1761 op_reply_q->q_segment_list = dma_alloc_coherent(&mrioc->pdev->dev, 1762 MPI3MR_MAX_SEG_LIST_SIZE, &op_reply_q->q_segment_list_dma, 1763 GFP_KERNEL); 1764 if (!op_reply_q->q_segment_list) 1765 return -ENOMEM; 1766 q_segment_list_entry = (u64 *)op_reply_q->q_segment_list; 1767 } else { 1768 op_reply_q->segment_qd = op_reply_q->num_replies; 1769 size = op_reply_q->num_replies * mrioc->op_reply_desc_sz; 1770 } 1771 1772 op_reply_q->num_segments = DIV_ROUND_UP(op_reply_q->num_replies, 1773 op_reply_q->segment_qd); 1774 1775 op_reply_q->q_segments = kcalloc(op_reply_q->num_segments, 1776 sizeof(struct segments), GFP_KERNEL); 1777 if (!op_reply_q->q_segments) 1778 return -ENOMEM; 1779 1780 segments = op_reply_q->q_segments; 1781 for (i = 0; i < op_reply_q->num_segments; i++) { 1782 segments[i].segment = 1783 dma_alloc_coherent(&mrioc->pdev->dev, 1784 size, &segments[i].segment_dma, GFP_KERNEL); 1785 if (!segments[i].segment) 1786 return -ENOMEM; 1787 if (mrioc->enable_segqueue) 1788 q_segment_list_entry[i] = 1789 (unsigned long)segments[i].segment_dma; 1790 } 1791 1792 return 0; 1793 } 1794 1795 /** 1796 * mpi3mr_alloc_op_req_q_segments - Alloc segmented req pool. 1797 * @mrioc: Adapter instance reference 1798 * @qidx: request queue index 1799 * 1800 * Allocate segmented memory pools for operational request 1801 * queue. 1802 * 1803 * Return: 0 on success, non-zero on failure. 1804 */ 1805 static int mpi3mr_alloc_op_req_q_segments(struct mpi3mr_ioc *mrioc, u16 qidx) 1806 { 1807 struct op_req_qinfo *op_req_q = mrioc->req_qinfo + qidx; 1808 int i, size; 1809 u64 *q_segment_list_entry = NULL; 1810 struct segments *segments; 1811 1812 if (mrioc->enable_segqueue) { 1813 op_req_q->segment_qd = 1814 MPI3MR_OP_REQ_Q_SEG_SIZE / mrioc->facts.op_req_sz; 1815 1816 size = MPI3MR_OP_REQ_Q_SEG_SIZE; 1817 1818 op_req_q->q_segment_list = dma_alloc_coherent(&mrioc->pdev->dev, 1819 MPI3MR_MAX_SEG_LIST_SIZE, &op_req_q->q_segment_list_dma, 1820 GFP_KERNEL); 1821 if (!op_req_q->q_segment_list) 1822 return -ENOMEM; 1823 q_segment_list_entry = (u64 *)op_req_q->q_segment_list; 1824 1825 } else { 1826 op_req_q->segment_qd = op_req_q->num_requests; 1827 size = op_req_q->num_requests * mrioc->facts.op_req_sz; 1828 } 1829 1830 op_req_q->num_segments = DIV_ROUND_UP(op_req_q->num_requests, 1831 op_req_q->segment_qd); 1832 1833 op_req_q->q_segments = kcalloc(op_req_q->num_segments, 1834 sizeof(struct segments), GFP_KERNEL); 1835 if (!op_req_q->q_segments) 1836 return -ENOMEM; 1837 1838 segments = op_req_q->q_segments; 1839 for (i = 0; i < op_req_q->num_segments; i++) { 1840 segments[i].segment = 1841 dma_alloc_coherent(&mrioc->pdev->dev, 1842 size, &segments[i].segment_dma, GFP_KERNEL); 1843 if (!segments[i].segment) 1844 return -ENOMEM; 1845 if (mrioc->enable_segqueue) 1846 q_segment_list_entry[i] = 1847 (unsigned long)segments[i].segment_dma; 1848 } 1849 1850 return 0; 1851 } 1852 1853 /** 1854 * mpi3mr_create_op_reply_q - create operational reply queue 1855 * @mrioc: Adapter instance reference 1856 * @qidx: operational reply queue index 1857 * 1858 * Create operatinal reply queue by issuing MPI request 1859 * through admin queue. 1860 * 1861 * Return: 0 on success, non-zero on failure. 1862 */ 1863 static int mpi3mr_create_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx) 1864 { 1865 struct mpi3_create_reply_queue_request create_req; 1866 struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx; 1867 int retval = 0; 1868 u16 reply_qid = 0, midx; 1869 1870 reply_qid = op_reply_q->qid; 1871 1872 midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, mrioc->op_reply_q_offset); 1873 1874 if (reply_qid) { 1875 retval = -1; 1876 ioc_err(mrioc, "CreateRepQ: called for duplicate qid %d\n", 1877 reply_qid); 1878 1879 return retval; 1880 } 1881 1882 reply_qid = qidx + 1; 1883 op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD; 1884 if (!mrioc->pdev->revision) 1885 op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD4K; 1886 op_reply_q->ci = 0; 1887 op_reply_q->ephase = 1; 1888 atomic_set(&op_reply_q->pend_ios, 0); 1889 atomic_set(&op_reply_q->in_use, 0); 1890 op_reply_q->enable_irq_poll = false; 1891 1892 if (!op_reply_q->q_segments) { 1893 retval = mpi3mr_alloc_op_reply_q_segments(mrioc, qidx); 1894 if (retval) { 1895 mpi3mr_free_op_reply_q_segments(mrioc, qidx); 1896 goto out; 1897 } 1898 } 1899 1900 memset(&create_req, 0, sizeof(create_req)); 1901 mutex_lock(&mrioc->init_cmds.mutex); 1902 if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { 1903 retval = -1; 1904 ioc_err(mrioc, "CreateRepQ: Init command is in use\n"); 1905 goto out_unlock; 1906 } 1907 mrioc->init_cmds.state = MPI3MR_CMD_PENDING; 1908 mrioc->init_cmds.is_waiting = 1; 1909 mrioc->init_cmds.callback = NULL; 1910 create_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); 1911 create_req.function = MPI3_FUNCTION_CREATE_REPLY_QUEUE; 1912 create_req.queue_id = cpu_to_le16(reply_qid); 1913 1914 if (midx < (mrioc->intr_info_count - mrioc->requested_poll_qcount)) 1915 op_reply_q->qtype = MPI3MR_DEFAULT_QUEUE; 1916 else 1917 op_reply_q->qtype = MPI3MR_POLL_QUEUE; 1918 1919 if (op_reply_q->qtype == MPI3MR_DEFAULT_QUEUE) { 1920 create_req.flags = 1921 MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE; 1922 create_req.msix_index = 1923 cpu_to_le16(mrioc->intr_info[midx].msix_index); 1924 } else { 1925 create_req.msix_index = cpu_to_le16(mrioc->intr_info_count - 1); 1926 ioc_info(mrioc, "create reply queue(polled): for qid(%d), midx(%d)\n", 1927 reply_qid, midx); 1928 if (!mrioc->active_poll_qcount) 1929 disable_irq_nosync(pci_irq_vector(mrioc->pdev, 1930 mrioc->intr_info_count - 1)); 1931 } 1932 1933 if (mrioc->enable_segqueue) { 1934 create_req.flags |= 1935 MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED; 1936 create_req.base_address = cpu_to_le64( 1937 op_reply_q->q_segment_list_dma); 1938 } else 1939 create_req.base_address = cpu_to_le64( 1940 op_reply_q->q_segments[0].segment_dma); 1941 1942 create_req.size = cpu_to_le16(op_reply_q->num_replies); 1943 1944 init_completion(&mrioc->init_cmds.done); 1945 retval = mpi3mr_admin_request_post(mrioc, &create_req, 1946 sizeof(create_req), 1); 1947 if (retval) { 1948 ioc_err(mrioc, "CreateRepQ: Admin Post failed\n"); 1949 goto out_unlock; 1950 } 1951 wait_for_completion_timeout(&mrioc->init_cmds.done, 1952 (MPI3MR_INTADMCMD_TIMEOUT * HZ)); 1953 if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { 1954 ioc_err(mrioc, "create reply queue timed out\n"); 1955 mpi3mr_check_rh_fault_ioc(mrioc, 1956 MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT); 1957 retval = -1; 1958 goto out_unlock; 1959 } 1960 if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) 1961 != MPI3_IOCSTATUS_SUCCESS) { 1962 ioc_err(mrioc, 1963 "CreateRepQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", 1964 (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), 1965 mrioc->init_cmds.ioc_loginfo); 1966 retval = -1; 1967 goto out_unlock; 1968 } 1969 op_reply_q->qid = reply_qid; 1970 if (midx < mrioc->intr_info_count) 1971 mrioc->intr_info[midx].op_reply_q = op_reply_q; 1972 1973 (op_reply_q->qtype == MPI3MR_DEFAULT_QUEUE) ? mrioc->default_qcount++ : 1974 mrioc->active_poll_qcount++; 1975 1976 out_unlock: 1977 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 1978 mutex_unlock(&mrioc->init_cmds.mutex); 1979 out: 1980 1981 return retval; 1982 } 1983 1984 /** 1985 * mpi3mr_create_op_req_q - create operational request queue 1986 * @mrioc: Adapter instance reference 1987 * @idx: operational request queue index 1988 * @reply_qid: Reply queue ID 1989 * 1990 * Create operatinal request queue by issuing MPI request 1991 * through admin queue. 1992 * 1993 * Return: 0 on success, non-zero on failure. 1994 */ 1995 static int mpi3mr_create_op_req_q(struct mpi3mr_ioc *mrioc, u16 idx, 1996 u16 reply_qid) 1997 { 1998 struct mpi3_create_request_queue_request create_req; 1999 struct op_req_qinfo *op_req_q = mrioc->req_qinfo + idx; 2000 int retval = 0; 2001 u16 req_qid = 0; 2002 2003 req_qid = op_req_q->qid; 2004 2005 if (req_qid) { 2006 retval = -1; 2007 ioc_err(mrioc, "CreateReqQ: called for duplicate qid %d\n", 2008 req_qid); 2009 2010 return retval; 2011 } 2012 req_qid = idx + 1; 2013 2014 op_req_q->num_requests = MPI3MR_OP_REQ_Q_QD; 2015 op_req_q->ci = 0; 2016 op_req_q->pi = 0; 2017 op_req_q->reply_qid = reply_qid; 2018 spin_lock_init(&op_req_q->q_lock); 2019 2020 if (!op_req_q->q_segments) { 2021 retval = mpi3mr_alloc_op_req_q_segments(mrioc, idx); 2022 if (retval) { 2023 mpi3mr_free_op_req_q_segments(mrioc, idx); 2024 goto out; 2025 } 2026 } 2027 2028 memset(&create_req, 0, sizeof(create_req)); 2029 mutex_lock(&mrioc->init_cmds.mutex); 2030 if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { 2031 retval = -1; 2032 ioc_err(mrioc, "CreateReqQ: Init command is in use\n"); 2033 goto out_unlock; 2034 } 2035 mrioc->init_cmds.state = MPI3MR_CMD_PENDING; 2036 mrioc->init_cmds.is_waiting = 1; 2037 mrioc->init_cmds.callback = NULL; 2038 create_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); 2039 create_req.function = MPI3_FUNCTION_CREATE_REQUEST_QUEUE; 2040 create_req.queue_id = cpu_to_le16(req_qid); 2041 if (mrioc->enable_segqueue) { 2042 create_req.flags = 2043 MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED; 2044 create_req.base_address = cpu_to_le64( 2045 op_req_q->q_segment_list_dma); 2046 } else 2047 create_req.base_address = cpu_to_le64( 2048 op_req_q->q_segments[0].segment_dma); 2049 create_req.reply_queue_id = cpu_to_le16(reply_qid); 2050 create_req.size = cpu_to_le16(op_req_q->num_requests); 2051 2052 init_completion(&mrioc->init_cmds.done); 2053 retval = mpi3mr_admin_request_post(mrioc, &create_req, 2054 sizeof(create_req), 1); 2055 if (retval) { 2056 ioc_err(mrioc, "CreateReqQ: Admin Post failed\n"); 2057 goto out_unlock; 2058 } 2059 wait_for_completion_timeout(&mrioc->init_cmds.done, 2060 (MPI3MR_INTADMCMD_TIMEOUT * HZ)); 2061 if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { 2062 ioc_err(mrioc, "create request queue timed out\n"); 2063 mpi3mr_check_rh_fault_ioc(mrioc, 2064 MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT); 2065 retval = -1; 2066 goto out_unlock; 2067 } 2068 if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) 2069 != MPI3_IOCSTATUS_SUCCESS) { 2070 ioc_err(mrioc, 2071 "CreateReqQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", 2072 (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), 2073 mrioc->init_cmds.ioc_loginfo); 2074 retval = -1; 2075 goto out_unlock; 2076 } 2077 op_req_q->qid = req_qid; 2078 2079 out_unlock: 2080 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 2081 mutex_unlock(&mrioc->init_cmds.mutex); 2082 out: 2083 2084 return retval; 2085 } 2086 2087 /** 2088 * mpi3mr_create_op_queues - create operational queue pairs 2089 * @mrioc: Adapter instance reference 2090 * 2091 * Allocate memory for operational queue meta data and call 2092 * create request and reply queue functions. 2093 * 2094 * Return: 0 on success, non-zero on failures. 2095 */ 2096 static int mpi3mr_create_op_queues(struct mpi3mr_ioc *mrioc) 2097 { 2098 int retval = 0; 2099 u16 num_queues = 0, i = 0, msix_count_op_q = 1; 2100 2101 num_queues = min_t(int, mrioc->facts.max_op_reply_q, 2102 mrioc->facts.max_op_req_q); 2103 2104 msix_count_op_q = 2105 mrioc->intr_info_count - mrioc->op_reply_q_offset; 2106 if (!mrioc->num_queues) 2107 mrioc->num_queues = min_t(int, num_queues, msix_count_op_q); 2108 /* 2109 * During reset set the num_queues to the number of queues 2110 * that was set before the reset. 2111 */ 2112 num_queues = mrioc->num_op_reply_q ? 2113 mrioc->num_op_reply_q : mrioc->num_queues; 2114 ioc_info(mrioc, "trying to create %d operational queue pairs\n", 2115 num_queues); 2116 2117 if (!mrioc->req_qinfo) { 2118 mrioc->req_qinfo = kcalloc(num_queues, 2119 sizeof(struct op_req_qinfo), GFP_KERNEL); 2120 if (!mrioc->req_qinfo) { 2121 retval = -1; 2122 goto out_failed; 2123 } 2124 2125 mrioc->op_reply_qinfo = kzalloc(sizeof(struct op_reply_qinfo) * 2126 num_queues, GFP_KERNEL); 2127 if (!mrioc->op_reply_qinfo) { 2128 retval = -1; 2129 goto out_failed; 2130 } 2131 } 2132 2133 if (mrioc->enable_segqueue) 2134 ioc_info(mrioc, 2135 "allocating operational queues through segmented queues\n"); 2136 2137 for (i = 0; i < num_queues; i++) { 2138 if (mpi3mr_create_op_reply_q(mrioc, i)) { 2139 ioc_err(mrioc, "Cannot create OP RepQ %d\n", i); 2140 break; 2141 } 2142 if (mpi3mr_create_op_req_q(mrioc, i, 2143 mrioc->op_reply_qinfo[i].qid)) { 2144 ioc_err(mrioc, "Cannot create OP ReqQ %d\n", i); 2145 mpi3mr_delete_op_reply_q(mrioc, i); 2146 break; 2147 } 2148 } 2149 2150 if (i == 0) { 2151 /* Not even one queue is created successfully*/ 2152 retval = -1; 2153 goto out_failed; 2154 } 2155 mrioc->num_op_reply_q = mrioc->num_op_req_q = i; 2156 ioc_info(mrioc, 2157 "successfully created %d operational queue pairs(default/polled) queue = (%d/%d)\n", 2158 mrioc->num_op_reply_q, mrioc->default_qcount, 2159 mrioc->active_poll_qcount); 2160 2161 return retval; 2162 out_failed: 2163 kfree(mrioc->req_qinfo); 2164 mrioc->req_qinfo = NULL; 2165 2166 kfree(mrioc->op_reply_qinfo); 2167 mrioc->op_reply_qinfo = NULL; 2168 2169 return retval; 2170 } 2171 2172 /** 2173 * mpi3mr_op_request_post - Post request to operational queue 2174 * @mrioc: Adapter reference 2175 * @op_req_q: Operational request queue info 2176 * @req: MPI3 request 2177 * 2178 * Post the MPI3 request into operational request queue and 2179 * inform the controller, if the queue is full return 2180 * appropriate error. 2181 * 2182 * Return: 0 on success, non-zero on failure. 2183 */ 2184 int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc, 2185 struct op_req_qinfo *op_req_q, u8 *req) 2186 { 2187 u16 pi = 0, max_entries, reply_qidx = 0, midx; 2188 int retval = 0; 2189 unsigned long flags; 2190 u8 *req_entry; 2191 void *segment_base_addr; 2192 u16 req_sz = mrioc->facts.op_req_sz; 2193 struct segments *segments = op_req_q->q_segments; 2194 2195 reply_qidx = op_req_q->reply_qid - 1; 2196 2197 if (mrioc->unrecoverable) 2198 return -EFAULT; 2199 2200 spin_lock_irqsave(&op_req_q->q_lock, flags); 2201 pi = op_req_q->pi; 2202 max_entries = op_req_q->num_requests; 2203 2204 if (mpi3mr_check_req_qfull(op_req_q)) { 2205 midx = REPLY_QUEUE_IDX_TO_MSIX_IDX( 2206 reply_qidx, mrioc->op_reply_q_offset); 2207 mpi3mr_process_op_reply_q(mrioc, mrioc->intr_info[midx].op_reply_q); 2208 2209 if (mpi3mr_check_req_qfull(op_req_q)) { 2210 retval = -EAGAIN; 2211 goto out; 2212 } 2213 } 2214 2215 if (mrioc->reset_in_progress) { 2216 ioc_err(mrioc, "OpReqQ submit reset in progress\n"); 2217 retval = -EAGAIN; 2218 goto out; 2219 } 2220 2221 segment_base_addr = segments[pi / op_req_q->segment_qd].segment; 2222 req_entry = (u8 *)segment_base_addr + 2223 ((pi % op_req_q->segment_qd) * req_sz); 2224 2225 memset(req_entry, 0, req_sz); 2226 memcpy(req_entry, req, MPI3MR_ADMIN_REQ_FRAME_SZ); 2227 2228 if (++pi == max_entries) 2229 pi = 0; 2230 op_req_q->pi = pi; 2231 2232 #ifndef CONFIG_PREEMPT_RT 2233 if (atomic_inc_return(&mrioc->op_reply_qinfo[reply_qidx].pend_ios) 2234 > MPI3MR_IRQ_POLL_TRIGGER_IOCOUNT) 2235 mrioc->op_reply_qinfo[reply_qidx].enable_irq_poll = true; 2236 #else 2237 atomic_inc_return(&mrioc->op_reply_qinfo[reply_qidx].pend_ios); 2238 #endif 2239 2240 writel(op_req_q->pi, 2241 &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].producer_index); 2242 2243 out: 2244 spin_unlock_irqrestore(&op_req_q->q_lock, flags); 2245 return retval; 2246 } 2247 2248 /** 2249 * mpi3mr_check_rh_fault_ioc - check reset history and fault 2250 * controller 2251 * @mrioc: Adapter instance reference 2252 * @reason_code: reason code for the fault. 2253 * 2254 * This routine will save snapdump and fault the controller with 2255 * the given reason code if it is not already in the fault or 2256 * not asynchronosuly reset. This will be used to handle 2257 * initilaization time faults/resets/timeout as in those cases 2258 * immediate soft reset invocation is not required. 2259 * 2260 * Return: None. 2261 */ 2262 void mpi3mr_check_rh_fault_ioc(struct mpi3mr_ioc *mrioc, u32 reason_code) 2263 { 2264 u32 ioc_status, host_diagnostic, timeout; 2265 2266 if (mrioc->unrecoverable) { 2267 ioc_err(mrioc, "controller is unrecoverable\n"); 2268 return; 2269 } 2270 2271 if (!pci_device_is_present(mrioc->pdev)) { 2272 mrioc->unrecoverable = 1; 2273 ioc_err(mrioc, "controller is not present\n"); 2274 return; 2275 } 2276 2277 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 2278 if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) || 2279 (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT)) { 2280 mpi3mr_print_fault_info(mrioc); 2281 return; 2282 } 2283 mpi3mr_set_diagsave(mrioc); 2284 mpi3mr_issue_reset(mrioc, MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, 2285 reason_code); 2286 timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10; 2287 do { 2288 host_diagnostic = readl(&mrioc->sysif_regs->host_diagnostic); 2289 if (!(host_diagnostic & MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS)) 2290 break; 2291 msleep(100); 2292 } while (--timeout); 2293 } 2294 2295 /** 2296 * mpi3mr_sync_timestamp - Issue time stamp sync request 2297 * @mrioc: Adapter reference 2298 * 2299 * Issue IO unit control MPI request to synchornize firmware 2300 * timestamp with host time. 2301 * 2302 * Return: 0 on success, non-zero on failure. 2303 */ 2304 static int mpi3mr_sync_timestamp(struct mpi3mr_ioc *mrioc) 2305 { 2306 ktime_t current_time; 2307 struct mpi3_iounit_control_request iou_ctrl; 2308 int retval = 0; 2309 2310 memset(&iou_ctrl, 0, sizeof(iou_ctrl)); 2311 mutex_lock(&mrioc->init_cmds.mutex); 2312 if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { 2313 retval = -1; 2314 ioc_err(mrioc, "Issue IOUCTL time_stamp: command is in use\n"); 2315 mutex_unlock(&mrioc->init_cmds.mutex); 2316 goto out; 2317 } 2318 mrioc->init_cmds.state = MPI3MR_CMD_PENDING; 2319 mrioc->init_cmds.is_waiting = 1; 2320 mrioc->init_cmds.callback = NULL; 2321 iou_ctrl.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); 2322 iou_ctrl.function = MPI3_FUNCTION_IO_UNIT_CONTROL; 2323 iou_ctrl.operation = MPI3_CTRL_OP_UPDATE_TIMESTAMP; 2324 current_time = ktime_get_real(); 2325 iou_ctrl.param64[0] = cpu_to_le64(ktime_to_ms(current_time)); 2326 2327 init_completion(&mrioc->init_cmds.done); 2328 retval = mpi3mr_admin_request_post(mrioc, &iou_ctrl, 2329 sizeof(iou_ctrl), 0); 2330 if (retval) { 2331 ioc_err(mrioc, "Issue IOUCTL time_stamp: Admin Post failed\n"); 2332 goto out_unlock; 2333 } 2334 2335 wait_for_completion_timeout(&mrioc->init_cmds.done, 2336 (MPI3MR_INTADMCMD_TIMEOUT * HZ)); 2337 if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { 2338 ioc_err(mrioc, "Issue IOUCTL time_stamp: command timed out\n"); 2339 mrioc->init_cmds.is_waiting = 0; 2340 if (!(mrioc->init_cmds.state & MPI3MR_CMD_RESET)) 2341 mpi3mr_soft_reset_handler(mrioc, 2342 MPI3MR_RESET_FROM_TSU_TIMEOUT, 1); 2343 retval = -1; 2344 goto out_unlock; 2345 } 2346 if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) 2347 != MPI3_IOCSTATUS_SUCCESS) { 2348 ioc_err(mrioc, 2349 "Issue IOUCTL time_stamp: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", 2350 (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), 2351 mrioc->init_cmds.ioc_loginfo); 2352 retval = -1; 2353 goto out_unlock; 2354 } 2355 2356 out_unlock: 2357 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 2358 mutex_unlock(&mrioc->init_cmds.mutex); 2359 2360 out: 2361 return retval; 2362 } 2363 2364 /** 2365 * mpi3mr_print_pkg_ver - display controller fw package version 2366 * @mrioc: Adapter reference 2367 * 2368 * Retrieve firmware package version from the component image 2369 * header of the controller flash and display it. 2370 * 2371 * Return: 0 on success and non-zero on failure. 2372 */ 2373 static int mpi3mr_print_pkg_ver(struct mpi3mr_ioc *mrioc) 2374 { 2375 struct mpi3_ci_upload_request ci_upload; 2376 int retval = -1; 2377 void *data = NULL; 2378 dma_addr_t data_dma; 2379 struct mpi3_ci_manifest_mpi *manifest; 2380 u32 data_len = sizeof(struct mpi3_ci_manifest_mpi); 2381 u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; 2382 2383 data = dma_alloc_coherent(&mrioc->pdev->dev, data_len, &data_dma, 2384 GFP_KERNEL); 2385 if (!data) 2386 return -ENOMEM; 2387 2388 memset(&ci_upload, 0, sizeof(ci_upload)); 2389 mutex_lock(&mrioc->init_cmds.mutex); 2390 if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { 2391 ioc_err(mrioc, "sending get package version failed due to command in use\n"); 2392 mutex_unlock(&mrioc->init_cmds.mutex); 2393 goto out; 2394 } 2395 mrioc->init_cmds.state = MPI3MR_CMD_PENDING; 2396 mrioc->init_cmds.is_waiting = 1; 2397 mrioc->init_cmds.callback = NULL; 2398 ci_upload.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); 2399 ci_upload.function = MPI3_FUNCTION_CI_UPLOAD; 2400 ci_upload.msg_flags = MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_PRIMARY; 2401 ci_upload.signature1 = cpu_to_le32(MPI3_IMAGE_HEADER_SIGNATURE1_MANIFEST); 2402 ci_upload.image_offset = cpu_to_le32(MPI3_IMAGE_HEADER_SIZE); 2403 ci_upload.segment_size = cpu_to_le32(data_len); 2404 2405 mpi3mr_add_sg_single(&ci_upload.sgl, sgl_flags, data_len, 2406 data_dma); 2407 init_completion(&mrioc->init_cmds.done); 2408 retval = mpi3mr_admin_request_post(mrioc, &ci_upload, 2409 sizeof(ci_upload), 1); 2410 if (retval) { 2411 ioc_err(mrioc, "posting get package version failed\n"); 2412 goto out_unlock; 2413 } 2414 wait_for_completion_timeout(&mrioc->init_cmds.done, 2415 (MPI3MR_INTADMCMD_TIMEOUT * HZ)); 2416 if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { 2417 ioc_err(mrioc, "get package version timed out\n"); 2418 mpi3mr_check_rh_fault_ioc(mrioc, 2419 MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT); 2420 retval = -1; 2421 goto out_unlock; 2422 } 2423 if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) 2424 == MPI3_IOCSTATUS_SUCCESS) { 2425 manifest = (struct mpi3_ci_manifest_mpi *) data; 2426 if (manifest->manifest_type == MPI3_CI_MANIFEST_TYPE_MPI) { 2427 ioc_info(mrioc, 2428 "firmware package version(%d.%d.%d.%d.%05d-%05d)\n", 2429 manifest->package_version.gen_major, 2430 manifest->package_version.gen_minor, 2431 manifest->package_version.phase_major, 2432 manifest->package_version.phase_minor, 2433 manifest->package_version.customer_id, 2434 manifest->package_version.build_num); 2435 } 2436 } 2437 retval = 0; 2438 out_unlock: 2439 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 2440 mutex_unlock(&mrioc->init_cmds.mutex); 2441 2442 out: 2443 if (data) 2444 dma_free_coherent(&mrioc->pdev->dev, data_len, data, 2445 data_dma); 2446 return retval; 2447 } 2448 2449 /** 2450 * mpi3mr_watchdog_work - watchdog thread to monitor faults 2451 * @work: work struct 2452 * 2453 * Watch dog work periodically executed (1 second interval) to 2454 * monitor firmware fault and to issue periodic timer sync to 2455 * the firmware. 2456 * 2457 * Return: Nothing. 2458 */ 2459 static void mpi3mr_watchdog_work(struct work_struct *work) 2460 { 2461 struct mpi3mr_ioc *mrioc = 2462 container_of(work, struct mpi3mr_ioc, watchdog_work.work); 2463 unsigned long flags; 2464 enum mpi3mr_iocstate ioc_state; 2465 u32 fault, host_diagnostic, ioc_status; 2466 u32 reset_reason = MPI3MR_RESET_FROM_FAULT_WATCH; 2467 2468 if (mrioc->reset_in_progress) 2469 return; 2470 2471 if (!mrioc->unrecoverable && !pci_device_is_present(mrioc->pdev)) { 2472 ioc_err(mrioc, "watchdog could not detect the controller\n"); 2473 mrioc->unrecoverable = 1; 2474 } 2475 2476 if (mrioc->unrecoverable) { 2477 ioc_err(mrioc, 2478 "flush pending commands for unrecoverable controller\n"); 2479 mpi3mr_flush_cmds_for_unrecovered_controller(mrioc); 2480 return; 2481 } 2482 2483 if (mrioc->ts_update_counter++ >= MPI3MR_TSUPDATE_INTERVAL) { 2484 mrioc->ts_update_counter = 0; 2485 mpi3mr_sync_timestamp(mrioc); 2486 } 2487 2488 if ((mrioc->prepare_for_reset) && 2489 ((mrioc->prepare_for_reset_timeout_counter++) >= 2490 MPI3MR_PREPARE_FOR_RESET_TIMEOUT)) { 2491 mpi3mr_soft_reset_handler(mrioc, 2492 MPI3MR_RESET_FROM_CIACTVRST_TIMER, 1); 2493 return; 2494 } 2495 2496 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 2497 if (ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) { 2498 mpi3mr_soft_reset_handler(mrioc, MPI3MR_RESET_FROM_FIRMWARE, 0); 2499 return; 2500 } 2501 2502 /*Check for fault state every one second and issue Soft reset*/ 2503 ioc_state = mpi3mr_get_iocstate(mrioc); 2504 if (ioc_state != MRIOC_STATE_FAULT) 2505 goto schedule_work; 2506 2507 fault = readl(&mrioc->sysif_regs->fault) & MPI3_SYSIF_FAULT_CODE_MASK; 2508 host_diagnostic = readl(&mrioc->sysif_regs->host_diagnostic); 2509 if (host_diagnostic & MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS) { 2510 if (!mrioc->diagsave_timeout) { 2511 mpi3mr_print_fault_info(mrioc); 2512 ioc_warn(mrioc, "diag save in progress\n"); 2513 } 2514 if ((mrioc->diagsave_timeout++) <= MPI3_SYSIF_DIAG_SAVE_TIMEOUT) 2515 goto schedule_work; 2516 } 2517 2518 mpi3mr_print_fault_info(mrioc); 2519 mrioc->diagsave_timeout = 0; 2520 2521 switch (fault) { 2522 case MPI3_SYSIF_FAULT_CODE_COMPLETE_RESET_NEEDED: 2523 case MPI3_SYSIF_FAULT_CODE_POWER_CYCLE_REQUIRED: 2524 ioc_warn(mrioc, 2525 "controller requires system power cycle, marking controller as unrecoverable\n"); 2526 mrioc->unrecoverable = 1; 2527 goto schedule_work; 2528 case MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS: 2529 goto schedule_work; 2530 case MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET: 2531 reset_reason = MPI3MR_RESET_FROM_CIACTIV_FAULT; 2532 break; 2533 default: 2534 break; 2535 } 2536 mpi3mr_soft_reset_handler(mrioc, reset_reason, 0); 2537 return; 2538 2539 schedule_work: 2540 spin_lock_irqsave(&mrioc->watchdog_lock, flags); 2541 if (mrioc->watchdog_work_q) 2542 queue_delayed_work(mrioc->watchdog_work_q, 2543 &mrioc->watchdog_work, 2544 msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL)); 2545 spin_unlock_irqrestore(&mrioc->watchdog_lock, flags); 2546 return; 2547 } 2548 2549 /** 2550 * mpi3mr_start_watchdog - Start watchdog 2551 * @mrioc: Adapter instance reference 2552 * 2553 * Create and start the watchdog thread to monitor controller 2554 * faults. 2555 * 2556 * Return: Nothing. 2557 */ 2558 void mpi3mr_start_watchdog(struct mpi3mr_ioc *mrioc) 2559 { 2560 if (mrioc->watchdog_work_q) 2561 return; 2562 2563 INIT_DELAYED_WORK(&mrioc->watchdog_work, mpi3mr_watchdog_work); 2564 snprintf(mrioc->watchdog_work_q_name, 2565 sizeof(mrioc->watchdog_work_q_name), "watchdog_%s%d", mrioc->name, 2566 mrioc->id); 2567 mrioc->watchdog_work_q = 2568 create_singlethread_workqueue(mrioc->watchdog_work_q_name); 2569 if (!mrioc->watchdog_work_q) { 2570 ioc_err(mrioc, "%s: failed (line=%d)\n", __func__, __LINE__); 2571 return; 2572 } 2573 2574 if (mrioc->watchdog_work_q) 2575 queue_delayed_work(mrioc->watchdog_work_q, 2576 &mrioc->watchdog_work, 2577 msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL)); 2578 } 2579 2580 /** 2581 * mpi3mr_stop_watchdog - Stop watchdog 2582 * @mrioc: Adapter instance reference 2583 * 2584 * Stop the watchdog thread created to monitor controller 2585 * faults. 2586 * 2587 * Return: Nothing. 2588 */ 2589 void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc) 2590 { 2591 unsigned long flags; 2592 struct workqueue_struct *wq; 2593 2594 spin_lock_irqsave(&mrioc->watchdog_lock, flags); 2595 wq = mrioc->watchdog_work_q; 2596 mrioc->watchdog_work_q = NULL; 2597 spin_unlock_irqrestore(&mrioc->watchdog_lock, flags); 2598 if (wq) { 2599 if (!cancel_delayed_work_sync(&mrioc->watchdog_work)) 2600 flush_workqueue(wq); 2601 destroy_workqueue(wq); 2602 } 2603 } 2604 2605 /** 2606 * mpi3mr_setup_admin_qpair - Setup admin queue pair 2607 * @mrioc: Adapter instance reference 2608 * 2609 * Allocate memory for admin queue pair if required and register 2610 * the admin queue with the controller. 2611 * 2612 * Return: 0 on success, non-zero on failures. 2613 */ 2614 static int mpi3mr_setup_admin_qpair(struct mpi3mr_ioc *mrioc) 2615 { 2616 int retval = 0; 2617 u32 num_admin_entries = 0; 2618 2619 mrioc->admin_req_q_sz = MPI3MR_ADMIN_REQ_Q_SIZE; 2620 mrioc->num_admin_req = mrioc->admin_req_q_sz / 2621 MPI3MR_ADMIN_REQ_FRAME_SZ; 2622 mrioc->admin_req_ci = mrioc->admin_req_pi = 0; 2623 2624 mrioc->admin_reply_q_sz = MPI3MR_ADMIN_REPLY_Q_SIZE; 2625 mrioc->num_admin_replies = mrioc->admin_reply_q_sz / 2626 MPI3MR_ADMIN_REPLY_FRAME_SZ; 2627 mrioc->admin_reply_ci = 0; 2628 mrioc->admin_reply_ephase = 1; 2629 atomic_set(&mrioc->admin_reply_q_in_use, 0); 2630 2631 if (!mrioc->admin_req_base) { 2632 mrioc->admin_req_base = dma_alloc_coherent(&mrioc->pdev->dev, 2633 mrioc->admin_req_q_sz, &mrioc->admin_req_dma, GFP_KERNEL); 2634 2635 if (!mrioc->admin_req_base) { 2636 retval = -1; 2637 goto out_failed; 2638 } 2639 2640 mrioc->admin_reply_base = dma_alloc_coherent(&mrioc->pdev->dev, 2641 mrioc->admin_reply_q_sz, &mrioc->admin_reply_dma, 2642 GFP_KERNEL); 2643 2644 if (!mrioc->admin_reply_base) { 2645 retval = -1; 2646 goto out_failed; 2647 } 2648 } 2649 2650 num_admin_entries = (mrioc->num_admin_replies << 16) | 2651 (mrioc->num_admin_req); 2652 writel(num_admin_entries, &mrioc->sysif_regs->admin_queue_num_entries); 2653 mpi3mr_writeq(mrioc->admin_req_dma, 2654 &mrioc->sysif_regs->admin_request_queue_address); 2655 mpi3mr_writeq(mrioc->admin_reply_dma, 2656 &mrioc->sysif_regs->admin_reply_queue_address); 2657 writel(mrioc->admin_req_pi, &mrioc->sysif_regs->admin_request_queue_pi); 2658 writel(mrioc->admin_reply_ci, &mrioc->sysif_regs->admin_reply_queue_ci); 2659 return retval; 2660 2661 out_failed: 2662 2663 if (mrioc->admin_reply_base) { 2664 dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_reply_q_sz, 2665 mrioc->admin_reply_base, mrioc->admin_reply_dma); 2666 mrioc->admin_reply_base = NULL; 2667 } 2668 if (mrioc->admin_req_base) { 2669 dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_req_q_sz, 2670 mrioc->admin_req_base, mrioc->admin_req_dma); 2671 mrioc->admin_req_base = NULL; 2672 } 2673 return retval; 2674 } 2675 2676 /** 2677 * mpi3mr_issue_iocfacts - Send IOC Facts 2678 * @mrioc: Adapter instance reference 2679 * @facts_data: Cached IOC facts data 2680 * 2681 * Issue IOC Facts MPI request through admin queue and wait for 2682 * the completion of it or time out. 2683 * 2684 * Return: 0 on success, non-zero on failures. 2685 */ 2686 static int mpi3mr_issue_iocfacts(struct mpi3mr_ioc *mrioc, 2687 struct mpi3_ioc_facts_data *facts_data) 2688 { 2689 struct mpi3_ioc_facts_request iocfacts_req; 2690 void *data = NULL; 2691 dma_addr_t data_dma; 2692 u32 data_len = sizeof(*facts_data); 2693 int retval = 0; 2694 u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; 2695 2696 data = dma_alloc_coherent(&mrioc->pdev->dev, data_len, &data_dma, 2697 GFP_KERNEL); 2698 2699 if (!data) { 2700 retval = -1; 2701 goto out; 2702 } 2703 2704 memset(&iocfacts_req, 0, sizeof(iocfacts_req)); 2705 mutex_lock(&mrioc->init_cmds.mutex); 2706 if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { 2707 retval = -1; 2708 ioc_err(mrioc, "Issue IOCFacts: Init command is in use\n"); 2709 mutex_unlock(&mrioc->init_cmds.mutex); 2710 goto out; 2711 } 2712 mrioc->init_cmds.state = MPI3MR_CMD_PENDING; 2713 mrioc->init_cmds.is_waiting = 1; 2714 mrioc->init_cmds.callback = NULL; 2715 iocfacts_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); 2716 iocfacts_req.function = MPI3_FUNCTION_IOC_FACTS; 2717 2718 mpi3mr_add_sg_single(&iocfacts_req.sgl, sgl_flags, data_len, 2719 data_dma); 2720 2721 init_completion(&mrioc->init_cmds.done); 2722 retval = mpi3mr_admin_request_post(mrioc, &iocfacts_req, 2723 sizeof(iocfacts_req), 1); 2724 if (retval) { 2725 ioc_err(mrioc, "Issue IOCFacts: Admin Post failed\n"); 2726 goto out_unlock; 2727 } 2728 wait_for_completion_timeout(&mrioc->init_cmds.done, 2729 (MPI3MR_INTADMCMD_TIMEOUT * HZ)); 2730 if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { 2731 ioc_err(mrioc, "ioc_facts timed out\n"); 2732 mpi3mr_check_rh_fault_ioc(mrioc, 2733 MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT); 2734 retval = -1; 2735 goto out_unlock; 2736 } 2737 if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) 2738 != MPI3_IOCSTATUS_SUCCESS) { 2739 ioc_err(mrioc, 2740 "Issue IOCFacts: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", 2741 (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), 2742 mrioc->init_cmds.ioc_loginfo); 2743 retval = -1; 2744 goto out_unlock; 2745 } 2746 memcpy(facts_data, (u8 *)data, data_len); 2747 mpi3mr_process_factsdata(mrioc, facts_data); 2748 out_unlock: 2749 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 2750 mutex_unlock(&mrioc->init_cmds.mutex); 2751 2752 out: 2753 if (data) 2754 dma_free_coherent(&mrioc->pdev->dev, data_len, data, data_dma); 2755 2756 return retval; 2757 } 2758 2759 /** 2760 * mpi3mr_check_reset_dma_mask - Process IOC facts data 2761 * @mrioc: Adapter instance reference 2762 * 2763 * Check whether the new DMA mask requested through IOCFacts by 2764 * firmware needs to be set, if so set it . 2765 * 2766 * Return: 0 on success, non-zero on failure. 2767 */ 2768 static inline int mpi3mr_check_reset_dma_mask(struct mpi3mr_ioc *mrioc) 2769 { 2770 struct pci_dev *pdev = mrioc->pdev; 2771 int r; 2772 u64 facts_dma_mask = DMA_BIT_MASK(mrioc->facts.dma_mask); 2773 2774 if (!mrioc->facts.dma_mask || (mrioc->dma_mask <= facts_dma_mask)) 2775 return 0; 2776 2777 ioc_info(mrioc, "Changing DMA mask from 0x%016llx to 0x%016llx\n", 2778 mrioc->dma_mask, facts_dma_mask); 2779 2780 r = dma_set_mask_and_coherent(&pdev->dev, facts_dma_mask); 2781 if (r) { 2782 ioc_err(mrioc, "Setting DMA mask to 0x%016llx failed: %d\n", 2783 facts_dma_mask, r); 2784 return r; 2785 } 2786 mrioc->dma_mask = facts_dma_mask; 2787 return r; 2788 } 2789 2790 /** 2791 * mpi3mr_process_factsdata - Process IOC facts data 2792 * @mrioc: Adapter instance reference 2793 * @facts_data: Cached IOC facts data 2794 * 2795 * Convert IOC facts data into cpu endianness and cache it in 2796 * the driver . 2797 * 2798 * Return: Nothing. 2799 */ 2800 static void mpi3mr_process_factsdata(struct mpi3mr_ioc *mrioc, 2801 struct mpi3_ioc_facts_data *facts_data) 2802 { 2803 u32 ioc_config, req_sz, facts_flags; 2804 2805 if ((le16_to_cpu(facts_data->ioc_facts_data_length)) != 2806 (sizeof(*facts_data) / 4)) { 2807 ioc_warn(mrioc, 2808 "IOCFactsdata length mismatch driver_sz(%zu) firmware_sz(%d)\n", 2809 sizeof(*facts_data), 2810 le16_to_cpu(facts_data->ioc_facts_data_length) * 4); 2811 } 2812 2813 ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); 2814 req_sz = 1 << ((ioc_config & MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ) >> 2815 MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ_SHIFT); 2816 if (le16_to_cpu(facts_data->ioc_request_frame_size) != (req_sz / 4)) { 2817 ioc_err(mrioc, 2818 "IOCFacts data reqFrameSize mismatch hw_size(%d) firmware_sz(%d)\n", 2819 req_sz / 4, le16_to_cpu(facts_data->ioc_request_frame_size)); 2820 } 2821 2822 memset(&mrioc->facts, 0, sizeof(mrioc->facts)); 2823 2824 facts_flags = le32_to_cpu(facts_data->flags); 2825 mrioc->facts.op_req_sz = req_sz; 2826 mrioc->op_reply_desc_sz = 1 << ((ioc_config & 2827 MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ) >> 2828 MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ_SHIFT); 2829 2830 mrioc->facts.ioc_num = facts_data->ioc_number; 2831 mrioc->facts.who_init = facts_data->who_init; 2832 mrioc->facts.max_msix_vectors = le16_to_cpu(facts_data->max_msix_vectors); 2833 mrioc->facts.personality = (facts_flags & 2834 MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK); 2835 mrioc->facts.dma_mask = (facts_flags & 2836 MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK) >> 2837 MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT; 2838 mrioc->facts.protocol_flags = facts_data->protocol_flags; 2839 mrioc->facts.mpi_version = le32_to_cpu(facts_data->mpi_version.word); 2840 mrioc->facts.max_reqs = le16_to_cpu(facts_data->max_outstanding_requests); 2841 mrioc->facts.product_id = le16_to_cpu(facts_data->product_id); 2842 mrioc->facts.reply_sz = le16_to_cpu(facts_data->reply_frame_size) * 4; 2843 mrioc->facts.exceptions = le16_to_cpu(facts_data->ioc_exceptions); 2844 mrioc->facts.max_perids = le16_to_cpu(facts_data->max_persistent_id); 2845 mrioc->facts.max_vds = le16_to_cpu(facts_data->max_vds); 2846 mrioc->facts.max_hpds = le16_to_cpu(facts_data->max_host_pds); 2847 mrioc->facts.max_advhpds = le16_to_cpu(facts_data->max_adv_host_pds); 2848 mrioc->facts.max_raid_pds = le16_to_cpu(facts_data->max_raid_pds); 2849 mrioc->facts.max_nvme = le16_to_cpu(facts_data->max_nvme); 2850 mrioc->facts.max_pcie_switches = 2851 le16_to_cpu(facts_data->max_pcie_switches); 2852 mrioc->facts.max_sasexpanders = 2853 le16_to_cpu(facts_data->max_sas_expanders); 2854 mrioc->facts.max_sasinitiators = 2855 le16_to_cpu(facts_data->max_sas_initiators); 2856 mrioc->facts.max_enclosures = le16_to_cpu(facts_data->max_enclosures); 2857 mrioc->facts.min_devhandle = le16_to_cpu(facts_data->min_dev_handle); 2858 mrioc->facts.max_devhandle = le16_to_cpu(facts_data->max_dev_handle); 2859 mrioc->facts.max_op_req_q = 2860 le16_to_cpu(facts_data->max_operational_request_queues); 2861 mrioc->facts.max_op_reply_q = 2862 le16_to_cpu(facts_data->max_operational_reply_queues); 2863 mrioc->facts.ioc_capabilities = 2864 le32_to_cpu(facts_data->ioc_capabilities); 2865 mrioc->facts.fw_ver.build_num = 2866 le16_to_cpu(facts_data->fw_version.build_num); 2867 mrioc->facts.fw_ver.cust_id = 2868 le16_to_cpu(facts_data->fw_version.customer_id); 2869 mrioc->facts.fw_ver.ph_minor = facts_data->fw_version.phase_minor; 2870 mrioc->facts.fw_ver.ph_major = facts_data->fw_version.phase_major; 2871 mrioc->facts.fw_ver.gen_minor = facts_data->fw_version.gen_minor; 2872 mrioc->facts.fw_ver.gen_major = facts_data->fw_version.gen_major; 2873 mrioc->msix_count = min_t(int, mrioc->msix_count, 2874 mrioc->facts.max_msix_vectors); 2875 mrioc->facts.sge_mod_mask = facts_data->sge_modifier_mask; 2876 mrioc->facts.sge_mod_value = facts_data->sge_modifier_value; 2877 mrioc->facts.sge_mod_shift = facts_data->sge_modifier_shift; 2878 mrioc->facts.shutdown_timeout = 2879 le16_to_cpu(facts_data->shutdown_timeout); 2880 2881 mrioc->facts.max_dev_per_tg = 2882 facts_data->max_devices_per_throttle_group; 2883 mrioc->facts.io_throttle_data_length = 2884 le16_to_cpu(facts_data->io_throttle_data_length); 2885 mrioc->facts.max_io_throttle_group = 2886 le16_to_cpu(facts_data->max_io_throttle_group); 2887 mrioc->facts.io_throttle_low = le16_to_cpu(facts_data->io_throttle_low); 2888 mrioc->facts.io_throttle_high = 2889 le16_to_cpu(facts_data->io_throttle_high); 2890 2891 /* Store in 512b block count */ 2892 if (mrioc->facts.io_throttle_data_length) 2893 mrioc->io_throttle_data_length = 2894 (mrioc->facts.io_throttle_data_length * 2 * 4); 2895 else 2896 /* set the length to 1MB + 1K to disable throttle */ 2897 mrioc->io_throttle_data_length = MPI3MR_MAX_SECTORS + 2; 2898 2899 mrioc->io_throttle_high = (mrioc->facts.io_throttle_high * 2 * 1024); 2900 mrioc->io_throttle_low = (mrioc->facts.io_throttle_low * 2 * 1024); 2901 2902 ioc_info(mrioc, "ioc_num(%d), maxopQ(%d), maxopRepQ(%d), maxdh(%d),", 2903 mrioc->facts.ioc_num, mrioc->facts.max_op_req_q, 2904 mrioc->facts.max_op_reply_q, mrioc->facts.max_devhandle); 2905 ioc_info(mrioc, 2906 "maxreqs(%d), mindh(%d) maxvectors(%d) maxperids(%d)\n", 2907 mrioc->facts.max_reqs, mrioc->facts.min_devhandle, 2908 mrioc->facts.max_msix_vectors, mrioc->facts.max_perids); 2909 ioc_info(mrioc, "SGEModMask 0x%x SGEModVal 0x%x SGEModShift 0x%x ", 2910 mrioc->facts.sge_mod_mask, mrioc->facts.sge_mod_value, 2911 mrioc->facts.sge_mod_shift); 2912 ioc_info(mrioc, "DMA mask %d InitialPE status 0x%x\n", 2913 mrioc->facts.dma_mask, (facts_flags & 2914 MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_MASK)); 2915 ioc_info(mrioc, 2916 "max_dev_per_throttle_group(%d), max_throttle_groups(%d)\n", 2917 mrioc->facts.max_dev_per_tg, mrioc->facts.max_io_throttle_group); 2918 ioc_info(mrioc, 2919 "io_throttle_data_len(%dKiB), io_throttle_high(%dMiB), io_throttle_low(%dMiB)\n", 2920 mrioc->facts.io_throttle_data_length * 4, 2921 mrioc->facts.io_throttle_high, mrioc->facts.io_throttle_low); 2922 } 2923 2924 /** 2925 * mpi3mr_alloc_reply_sense_bufs - Send IOC Init 2926 * @mrioc: Adapter instance reference 2927 * 2928 * Allocate and initialize the reply free buffers, sense 2929 * buffers, reply free queue and sense buffer queue. 2930 * 2931 * Return: 0 on success, non-zero on failures. 2932 */ 2933 static int mpi3mr_alloc_reply_sense_bufs(struct mpi3mr_ioc *mrioc) 2934 { 2935 int retval = 0; 2936 u32 sz, i; 2937 2938 if (mrioc->init_cmds.reply) 2939 return retval; 2940 2941 mrioc->init_cmds.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); 2942 if (!mrioc->init_cmds.reply) 2943 goto out_failed; 2944 2945 mrioc->bsg_cmds.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); 2946 if (!mrioc->bsg_cmds.reply) 2947 goto out_failed; 2948 2949 mrioc->transport_cmds.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); 2950 if (!mrioc->transport_cmds.reply) 2951 goto out_failed; 2952 2953 for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { 2954 mrioc->dev_rmhs_cmds[i].reply = kzalloc(mrioc->reply_sz, 2955 GFP_KERNEL); 2956 if (!mrioc->dev_rmhs_cmds[i].reply) 2957 goto out_failed; 2958 } 2959 2960 for (i = 0; i < MPI3MR_NUM_EVTACKCMD; i++) { 2961 mrioc->evtack_cmds[i].reply = kzalloc(mrioc->reply_sz, 2962 GFP_KERNEL); 2963 if (!mrioc->evtack_cmds[i].reply) 2964 goto out_failed; 2965 } 2966 2967 mrioc->host_tm_cmds.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); 2968 if (!mrioc->host_tm_cmds.reply) 2969 goto out_failed; 2970 2971 mrioc->pel_cmds.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); 2972 if (!mrioc->pel_cmds.reply) 2973 goto out_failed; 2974 2975 mrioc->pel_abort_cmd.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); 2976 if (!mrioc->pel_abort_cmd.reply) 2977 goto out_failed; 2978 2979 mrioc->dev_handle_bitmap_bits = mrioc->facts.max_devhandle; 2980 mrioc->removepend_bitmap = bitmap_zalloc(mrioc->dev_handle_bitmap_bits, 2981 GFP_KERNEL); 2982 if (!mrioc->removepend_bitmap) 2983 goto out_failed; 2984 2985 mrioc->devrem_bitmap = bitmap_zalloc(MPI3MR_NUM_DEVRMCMD, GFP_KERNEL); 2986 if (!mrioc->devrem_bitmap) 2987 goto out_failed; 2988 2989 mrioc->evtack_cmds_bitmap = bitmap_zalloc(MPI3MR_NUM_EVTACKCMD, 2990 GFP_KERNEL); 2991 if (!mrioc->evtack_cmds_bitmap) 2992 goto out_failed; 2993 2994 mrioc->num_reply_bufs = mrioc->facts.max_reqs + MPI3MR_NUM_EVT_REPLIES; 2995 mrioc->reply_free_qsz = mrioc->num_reply_bufs + 1; 2996 mrioc->num_sense_bufs = mrioc->facts.max_reqs / MPI3MR_SENSEBUF_FACTOR; 2997 mrioc->sense_buf_q_sz = mrioc->num_sense_bufs + 1; 2998 2999 /* reply buffer pool, 16 byte align */ 3000 sz = mrioc->num_reply_bufs * mrioc->reply_sz; 3001 mrioc->reply_buf_pool = dma_pool_create("reply_buf pool", 3002 &mrioc->pdev->dev, sz, 16, 0); 3003 if (!mrioc->reply_buf_pool) { 3004 ioc_err(mrioc, "reply buf pool: dma_pool_create failed\n"); 3005 goto out_failed; 3006 } 3007 3008 mrioc->reply_buf = dma_pool_zalloc(mrioc->reply_buf_pool, GFP_KERNEL, 3009 &mrioc->reply_buf_dma); 3010 if (!mrioc->reply_buf) 3011 goto out_failed; 3012 3013 mrioc->reply_buf_dma_max_address = mrioc->reply_buf_dma + sz; 3014 3015 /* reply free queue, 8 byte align */ 3016 sz = mrioc->reply_free_qsz * 8; 3017 mrioc->reply_free_q_pool = dma_pool_create("reply_free_q pool", 3018 &mrioc->pdev->dev, sz, 8, 0); 3019 if (!mrioc->reply_free_q_pool) { 3020 ioc_err(mrioc, "reply_free_q pool: dma_pool_create failed\n"); 3021 goto out_failed; 3022 } 3023 mrioc->reply_free_q = dma_pool_zalloc(mrioc->reply_free_q_pool, 3024 GFP_KERNEL, &mrioc->reply_free_q_dma); 3025 if (!mrioc->reply_free_q) 3026 goto out_failed; 3027 3028 /* sense buffer pool, 4 byte align */ 3029 sz = mrioc->num_sense_bufs * MPI3MR_SENSE_BUF_SZ; 3030 mrioc->sense_buf_pool = dma_pool_create("sense_buf pool", 3031 &mrioc->pdev->dev, sz, 4, 0); 3032 if (!mrioc->sense_buf_pool) { 3033 ioc_err(mrioc, "sense_buf pool: dma_pool_create failed\n"); 3034 goto out_failed; 3035 } 3036 mrioc->sense_buf = dma_pool_zalloc(mrioc->sense_buf_pool, GFP_KERNEL, 3037 &mrioc->sense_buf_dma); 3038 if (!mrioc->sense_buf) 3039 goto out_failed; 3040 3041 /* sense buffer queue, 8 byte align */ 3042 sz = mrioc->sense_buf_q_sz * 8; 3043 mrioc->sense_buf_q_pool = dma_pool_create("sense_buf_q pool", 3044 &mrioc->pdev->dev, sz, 8, 0); 3045 if (!mrioc->sense_buf_q_pool) { 3046 ioc_err(mrioc, "sense_buf_q pool: dma_pool_create failed\n"); 3047 goto out_failed; 3048 } 3049 mrioc->sense_buf_q = dma_pool_zalloc(mrioc->sense_buf_q_pool, 3050 GFP_KERNEL, &mrioc->sense_buf_q_dma); 3051 if (!mrioc->sense_buf_q) 3052 goto out_failed; 3053 3054 return retval; 3055 3056 out_failed: 3057 retval = -1; 3058 return retval; 3059 } 3060 3061 /** 3062 * mpimr_initialize_reply_sbuf_queues - initialize reply sense 3063 * buffers 3064 * @mrioc: Adapter instance reference 3065 * 3066 * Helper function to initialize reply and sense buffers along 3067 * with some debug prints. 3068 * 3069 * Return: None. 3070 */ 3071 static void mpimr_initialize_reply_sbuf_queues(struct mpi3mr_ioc *mrioc) 3072 { 3073 u32 sz, i; 3074 dma_addr_t phy_addr; 3075 3076 sz = mrioc->num_reply_bufs * mrioc->reply_sz; 3077 ioc_info(mrioc, 3078 "reply buf pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), reply_dma(0x%llx)\n", 3079 mrioc->reply_buf, mrioc->num_reply_bufs, mrioc->reply_sz, 3080 (sz / 1024), (unsigned long long)mrioc->reply_buf_dma); 3081 sz = mrioc->reply_free_qsz * 8; 3082 ioc_info(mrioc, 3083 "reply_free_q pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), reply_dma(0x%llx)\n", 3084 mrioc->reply_free_q, mrioc->reply_free_qsz, 8, (sz / 1024), 3085 (unsigned long long)mrioc->reply_free_q_dma); 3086 sz = mrioc->num_sense_bufs * MPI3MR_SENSE_BUF_SZ; 3087 ioc_info(mrioc, 3088 "sense_buf pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), sense_dma(0x%llx)\n", 3089 mrioc->sense_buf, mrioc->num_sense_bufs, MPI3MR_SENSE_BUF_SZ, 3090 (sz / 1024), (unsigned long long)mrioc->sense_buf_dma); 3091 sz = mrioc->sense_buf_q_sz * 8; 3092 ioc_info(mrioc, 3093 "sense_buf_q pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), sense_dma(0x%llx)\n", 3094 mrioc->sense_buf_q, mrioc->sense_buf_q_sz, 8, (sz / 1024), 3095 (unsigned long long)mrioc->sense_buf_q_dma); 3096 3097 /* initialize Reply buffer Queue */ 3098 for (i = 0, phy_addr = mrioc->reply_buf_dma; 3099 i < mrioc->num_reply_bufs; i++, phy_addr += mrioc->reply_sz) 3100 mrioc->reply_free_q[i] = cpu_to_le64(phy_addr); 3101 mrioc->reply_free_q[i] = cpu_to_le64(0); 3102 3103 /* initialize Sense Buffer Queue */ 3104 for (i = 0, phy_addr = mrioc->sense_buf_dma; 3105 i < mrioc->num_sense_bufs; i++, phy_addr += MPI3MR_SENSE_BUF_SZ) 3106 mrioc->sense_buf_q[i] = cpu_to_le64(phy_addr); 3107 mrioc->sense_buf_q[i] = cpu_to_le64(0); 3108 } 3109 3110 /** 3111 * mpi3mr_issue_iocinit - Send IOC Init 3112 * @mrioc: Adapter instance reference 3113 * 3114 * Issue IOC Init MPI request through admin queue and wait for 3115 * the completion of it or time out. 3116 * 3117 * Return: 0 on success, non-zero on failures. 3118 */ 3119 static int mpi3mr_issue_iocinit(struct mpi3mr_ioc *mrioc) 3120 { 3121 struct mpi3_ioc_init_request iocinit_req; 3122 struct mpi3_driver_info_layout *drv_info; 3123 dma_addr_t data_dma; 3124 u32 data_len = sizeof(*drv_info); 3125 int retval = 0; 3126 ktime_t current_time; 3127 3128 drv_info = dma_alloc_coherent(&mrioc->pdev->dev, data_len, &data_dma, 3129 GFP_KERNEL); 3130 if (!drv_info) { 3131 retval = -1; 3132 goto out; 3133 } 3134 mpimr_initialize_reply_sbuf_queues(mrioc); 3135 3136 drv_info->information_length = cpu_to_le32(data_len); 3137 strscpy(drv_info->driver_signature, "Broadcom", sizeof(drv_info->driver_signature)); 3138 strscpy(drv_info->os_name, utsname()->sysname, sizeof(drv_info->os_name)); 3139 strscpy(drv_info->os_version, utsname()->release, sizeof(drv_info->os_version)); 3140 strscpy(drv_info->driver_name, MPI3MR_DRIVER_NAME, sizeof(drv_info->driver_name)); 3141 strscpy(drv_info->driver_version, MPI3MR_DRIVER_VERSION, sizeof(drv_info->driver_version)); 3142 strscpy(drv_info->driver_release_date, MPI3MR_DRIVER_RELDATE, 3143 sizeof(drv_info->driver_release_date)); 3144 drv_info->driver_capabilities = 0; 3145 memcpy((u8 *)&mrioc->driver_info, (u8 *)drv_info, 3146 sizeof(mrioc->driver_info)); 3147 3148 memset(&iocinit_req, 0, sizeof(iocinit_req)); 3149 mutex_lock(&mrioc->init_cmds.mutex); 3150 if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { 3151 retval = -1; 3152 ioc_err(mrioc, "Issue IOCInit: Init command is in use\n"); 3153 mutex_unlock(&mrioc->init_cmds.mutex); 3154 goto out; 3155 } 3156 mrioc->init_cmds.state = MPI3MR_CMD_PENDING; 3157 mrioc->init_cmds.is_waiting = 1; 3158 mrioc->init_cmds.callback = NULL; 3159 iocinit_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); 3160 iocinit_req.function = MPI3_FUNCTION_IOC_INIT; 3161 iocinit_req.mpi_version.mpi3_version.dev = MPI3_VERSION_DEV; 3162 iocinit_req.mpi_version.mpi3_version.unit = MPI3_VERSION_UNIT; 3163 iocinit_req.mpi_version.mpi3_version.major = MPI3_VERSION_MAJOR; 3164 iocinit_req.mpi_version.mpi3_version.minor = MPI3_VERSION_MINOR; 3165 iocinit_req.who_init = MPI3_WHOINIT_HOST_DRIVER; 3166 iocinit_req.reply_free_queue_depth = cpu_to_le16(mrioc->reply_free_qsz); 3167 iocinit_req.reply_free_queue_address = 3168 cpu_to_le64(mrioc->reply_free_q_dma); 3169 iocinit_req.sense_buffer_length = cpu_to_le16(MPI3MR_SENSE_BUF_SZ); 3170 iocinit_req.sense_buffer_free_queue_depth = 3171 cpu_to_le16(mrioc->sense_buf_q_sz); 3172 iocinit_req.sense_buffer_free_queue_address = 3173 cpu_to_le64(mrioc->sense_buf_q_dma); 3174 iocinit_req.driver_information_address = cpu_to_le64(data_dma); 3175 3176 current_time = ktime_get_real(); 3177 iocinit_req.time_stamp = cpu_to_le64(ktime_to_ms(current_time)); 3178 3179 init_completion(&mrioc->init_cmds.done); 3180 retval = mpi3mr_admin_request_post(mrioc, &iocinit_req, 3181 sizeof(iocinit_req), 1); 3182 if (retval) { 3183 ioc_err(mrioc, "Issue IOCInit: Admin Post failed\n"); 3184 goto out_unlock; 3185 } 3186 wait_for_completion_timeout(&mrioc->init_cmds.done, 3187 (MPI3MR_INTADMCMD_TIMEOUT * HZ)); 3188 if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { 3189 mpi3mr_check_rh_fault_ioc(mrioc, 3190 MPI3MR_RESET_FROM_IOCINIT_TIMEOUT); 3191 ioc_err(mrioc, "ioc_init timed out\n"); 3192 retval = -1; 3193 goto out_unlock; 3194 } 3195 if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) 3196 != MPI3_IOCSTATUS_SUCCESS) { 3197 ioc_err(mrioc, 3198 "Issue IOCInit: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", 3199 (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), 3200 mrioc->init_cmds.ioc_loginfo); 3201 retval = -1; 3202 goto out_unlock; 3203 } 3204 3205 mrioc->reply_free_queue_host_index = mrioc->num_reply_bufs; 3206 writel(mrioc->reply_free_queue_host_index, 3207 &mrioc->sysif_regs->reply_free_host_index); 3208 3209 mrioc->sbq_host_index = mrioc->num_sense_bufs; 3210 writel(mrioc->sbq_host_index, 3211 &mrioc->sysif_regs->sense_buffer_free_host_index); 3212 out_unlock: 3213 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 3214 mutex_unlock(&mrioc->init_cmds.mutex); 3215 3216 out: 3217 if (drv_info) 3218 dma_free_coherent(&mrioc->pdev->dev, data_len, drv_info, 3219 data_dma); 3220 3221 return retval; 3222 } 3223 3224 /** 3225 * mpi3mr_unmask_events - Unmask events in event mask bitmap 3226 * @mrioc: Adapter instance reference 3227 * @event: MPI event ID 3228 * 3229 * Un mask the specific event by resetting the event_mask 3230 * bitmap. 3231 * 3232 * Return: 0 on success, non-zero on failures. 3233 */ 3234 static void mpi3mr_unmask_events(struct mpi3mr_ioc *mrioc, u16 event) 3235 { 3236 u32 desired_event; 3237 u8 word; 3238 3239 if (event >= 128) 3240 return; 3241 3242 desired_event = (1 << (event % 32)); 3243 word = event / 32; 3244 3245 mrioc->event_masks[word] &= ~desired_event; 3246 } 3247 3248 /** 3249 * mpi3mr_issue_event_notification - Send event notification 3250 * @mrioc: Adapter instance reference 3251 * 3252 * Issue event notification MPI request through admin queue and 3253 * wait for the completion of it or time out. 3254 * 3255 * Return: 0 on success, non-zero on failures. 3256 */ 3257 static int mpi3mr_issue_event_notification(struct mpi3mr_ioc *mrioc) 3258 { 3259 struct mpi3_event_notification_request evtnotify_req; 3260 int retval = 0; 3261 u8 i; 3262 3263 memset(&evtnotify_req, 0, sizeof(evtnotify_req)); 3264 mutex_lock(&mrioc->init_cmds.mutex); 3265 if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { 3266 retval = -1; 3267 ioc_err(mrioc, "Issue EvtNotify: Init command is in use\n"); 3268 mutex_unlock(&mrioc->init_cmds.mutex); 3269 goto out; 3270 } 3271 mrioc->init_cmds.state = MPI3MR_CMD_PENDING; 3272 mrioc->init_cmds.is_waiting = 1; 3273 mrioc->init_cmds.callback = NULL; 3274 evtnotify_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); 3275 evtnotify_req.function = MPI3_FUNCTION_EVENT_NOTIFICATION; 3276 for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) 3277 evtnotify_req.event_masks[i] = 3278 cpu_to_le32(mrioc->event_masks[i]); 3279 init_completion(&mrioc->init_cmds.done); 3280 retval = mpi3mr_admin_request_post(mrioc, &evtnotify_req, 3281 sizeof(evtnotify_req), 1); 3282 if (retval) { 3283 ioc_err(mrioc, "Issue EvtNotify: Admin Post failed\n"); 3284 goto out_unlock; 3285 } 3286 wait_for_completion_timeout(&mrioc->init_cmds.done, 3287 (MPI3MR_INTADMCMD_TIMEOUT * HZ)); 3288 if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { 3289 ioc_err(mrioc, "event notification timed out\n"); 3290 mpi3mr_check_rh_fault_ioc(mrioc, 3291 MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT); 3292 retval = -1; 3293 goto out_unlock; 3294 } 3295 if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) 3296 != MPI3_IOCSTATUS_SUCCESS) { 3297 ioc_err(mrioc, 3298 "Issue EvtNotify: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", 3299 (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), 3300 mrioc->init_cmds.ioc_loginfo); 3301 retval = -1; 3302 goto out_unlock; 3303 } 3304 3305 out_unlock: 3306 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 3307 mutex_unlock(&mrioc->init_cmds.mutex); 3308 out: 3309 return retval; 3310 } 3311 3312 /** 3313 * mpi3mr_process_event_ack - Process event acknowledgment 3314 * @mrioc: Adapter instance reference 3315 * @event: MPI3 event ID 3316 * @event_ctx: event context 3317 * 3318 * Send event acknowledgment through admin queue and wait for 3319 * it to complete. 3320 * 3321 * Return: 0 on success, non-zero on failures. 3322 */ 3323 int mpi3mr_process_event_ack(struct mpi3mr_ioc *mrioc, u8 event, 3324 u32 event_ctx) 3325 { 3326 struct mpi3_event_ack_request evtack_req; 3327 int retval = 0; 3328 3329 memset(&evtack_req, 0, sizeof(evtack_req)); 3330 mutex_lock(&mrioc->init_cmds.mutex); 3331 if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { 3332 retval = -1; 3333 ioc_err(mrioc, "Send EvtAck: Init command is in use\n"); 3334 mutex_unlock(&mrioc->init_cmds.mutex); 3335 goto out; 3336 } 3337 mrioc->init_cmds.state = MPI3MR_CMD_PENDING; 3338 mrioc->init_cmds.is_waiting = 1; 3339 mrioc->init_cmds.callback = NULL; 3340 evtack_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); 3341 evtack_req.function = MPI3_FUNCTION_EVENT_ACK; 3342 evtack_req.event = event; 3343 evtack_req.event_context = cpu_to_le32(event_ctx); 3344 3345 init_completion(&mrioc->init_cmds.done); 3346 retval = mpi3mr_admin_request_post(mrioc, &evtack_req, 3347 sizeof(evtack_req), 1); 3348 if (retval) { 3349 ioc_err(mrioc, "Send EvtAck: Admin Post failed\n"); 3350 goto out_unlock; 3351 } 3352 wait_for_completion_timeout(&mrioc->init_cmds.done, 3353 (MPI3MR_INTADMCMD_TIMEOUT * HZ)); 3354 if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { 3355 ioc_err(mrioc, "Issue EvtNotify: command timed out\n"); 3356 if (!(mrioc->init_cmds.state & MPI3MR_CMD_RESET)) 3357 mpi3mr_soft_reset_handler(mrioc, 3358 MPI3MR_RESET_FROM_EVTACK_TIMEOUT, 1); 3359 retval = -1; 3360 goto out_unlock; 3361 } 3362 if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) 3363 != MPI3_IOCSTATUS_SUCCESS) { 3364 ioc_err(mrioc, 3365 "Send EvtAck: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", 3366 (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), 3367 mrioc->init_cmds.ioc_loginfo); 3368 retval = -1; 3369 goto out_unlock; 3370 } 3371 3372 out_unlock: 3373 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 3374 mutex_unlock(&mrioc->init_cmds.mutex); 3375 out: 3376 return retval; 3377 } 3378 3379 /** 3380 * mpi3mr_alloc_chain_bufs - Allocate chain buffers 3381 * @mrioc: Adapter instance reference 3382 * 3383 * Allocate chain buffers and set a bitmap to indicate free 3384 * chain buffers. Chain buffers are used to pass the SGE 3385 * information along with MPI3 SCSI IO requests for host I/O. 3386 * 3387 * Return: 0 on success, non-zero on failure 3388 */ 3389 static int mpi3mr_alloc_chain_bufs(struct mpi3mr_ioc *mrioc) 3390 { 3391 int retval = 0; 3392 u32 sz, i; 3393 u16 num_chains; 3394 3395 if (mrioc->chain_sgl_list) 3396 return retval; 3397 3398 num_chains = mrioc->max_host_ios / MPI3MR_CHAINBUF_FACTOR; 3399 3400 if (prot_mask & (SHOST_DIX_TYPE0_PROTECTION 3401 | SHOST_DIX_TYPE1_PROTECTION 3402 | SHOST_DIX_TYPE2_PROTECTION 3403 | SHOST_DIX_TYPE3_PROTECTION)) 3404 num_chains += (num_chains / MPI3MR_CHAINBUFDIX_FACTOR); 3405 3406 mrioc->chain_buf_count = num_chains; 3407 sz = sizeof(struct chain_element) * num_chains; 3408 mrioc->chain_sgl_list = kzalloc(sz, GFP_KERNEL); 3409 if (!mrioc->chain_sgl_list) 3410 goto out_failed; 3411 3412 sz = MPI3MR_PAGE_SIZE_4K; 3413 mrioc->chain_buf_pool = dma_pool_create("chain_buf pool", 3414 &mrioc->pdev->dev, sz, 16, 0); 3415 if (!mrioc->chain_buf_pool) { 3416 ioc_err(mrioc, "chain buf pool: dma_pool_create failed\n"); 3417 goto out_failed; 3418 } 3419 3420 for (i = 0; i < num_chains; i++) { 3421 mrioc->chain_sgl_list[i].addr = 3422 dma_pool_zalloc(mrioc->chain_buf_pool, GFP_KERNEL, 3423 &mrioc->chain_sgl_list[i].dma_addr); 3424 3425 if (!mrioc->chain_sgl_list[i].addr) 3426 goto out_failed; 3427 } 3428 mrioc->chain_bitmap = bitmap_zalloc(num_chains, GFP_KERNEL); 3429 if (!mrioc->chain_bitmap) 3430 goto out_failed; 3431 return retval; 3432 out_failed: 3433 retval = -1; 3434 return retval; 3435 } 3436 3437 /** 3438 * mpi3mr_port_enable_complete - Mark port enable complete 3439 * @mrioc: Adapter instance reference 3440 * @drv_cmd: Internal command tracker 3441 * 3442 * Call back for asynchronous port enable request sets the 3443 * driver command to indicate port enable request is complete. 3444 * 3445 * Return: Nothing 3446 */ 3447 static void mpi3mr_port_enable_complete(struct mpi3mr_ioc *mrioc, 3448 struct mpi3mr_drv_cmd *drv_cmd) 3449 { 3450 drv_cmd->callback = NULL; 3451 mrioc->scan_started = 0; 3452 if (drv_cmd->state & MPI3MR_CMD_RESET) 3453 mrioc->scan_failed = MPI3_IOCSTATUS_INTERNAL_ERROR; 3454 else 3455 mrioc->scan_failed = drv_cmd->ioc_status; 3456 drv_cmd->state = MPI3MR_CMD_NOTUSED; 3457 } 3458 3459 /** 3460 * mpi3mr_issue_port_enable - Issue Port Enable 3461 * @mrioc: Adapter instance reference 3462 * @async: Flag to wait for completion or not 3463 * 3464 * Issue Port Enable MPI request through admin queue and if the 3465 * async flag is not set wait for the completion of the port 3466 * enable or time out. 3467 * 3468 * Return: 0 on success, non-zero on failures. 3469 */ 3470 int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async) 3471 { 3472 struct mpi3_port_enable_request pe_req; 3473 int retval = 0; 3474 u32 pe_timeout = MPI3MR_PORTENABLE_TIMEOUT; 3475 3476 memset(&pe_req, 0, sizeof(pe_req)); 3477 mutex_lock(&mrioc->init_cmds.mutex); 3478 if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { 3479 retval = -1; 3480 ioc_err(mrioc, "Issue PortEnable: Init command is in use\n"); 3481 mutex_unlock(&mrioc->init_cmds.mutex); 3482 goto out; 3483 } 3484 mrioc->init_cmds.state = MPI3MR_CMD_PENDING; 3485 if (async) { 3486 mrioc->init_cmds.is_waiting = 0; 3487 mrioc->init_cmds.callback = mpi3mr_port_enable_complete; 3488 } else { 3489 mrioc->init_cmds.is_waiting = 1; 3490 mrioc->init_cmds.callback = NULL; 3491 init_completion(&mrioc->init_cmds.done); 3492 } 3493 pe_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); 3494 pe_req.function = MPI3_FUNCTION_PORT_ENABLE; 3495 3496 retval = mpi3mr_admin_request_post(mrioc, &pe_req, sizeof(pe_req), 1); 3497 if (retval) { 3498 ioc_err(mrioc, "Issue PortEnable: Admin Post failed\n"); 3499 goto out_unlock; 3500 } 3501 if (async) { 3502 mutex_unlock(&mrioc->init_cmds.mutex); 3503 goto out; 3504 } 3505 3506 wait_for_completion_timeout(&mrioc->init_cmds.done, (pe_timeout * HZ)); 3507 if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { 3508 ioc_err(mrioc, "port enable timed out\n"); 3509 retval = -1; 3510 mpi3mr_check_rh_fault_ioc(mrioc, MPI3MR_RESET_FROM_PE_TIMEOUT); 3511 goto out_unlock; 3512 } 3513 mpi3mr_port_enable_complete(mrioc, &mrioc->init_cmds); 3514 3515 out_unlock: 3516 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 3517 mutex_unlock(&mrioc->init_cmds.mutex); 3518 out: 3519 return retval; 3520 } 3521 3522 /* Protocol type to name mapper structure */ 3523 static const struct { 3524 u8 protocol; 3525 char *name; 3526 } mpi3mr_protocols[] = { 3527 { MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR, "Initiator" }, 3528 { MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET, "Target" }, 3529 { MPI3_IOCFACTS_PROTOCOL_NVME, "NVMe attachment" }, 3530 }; 3531 3532 /* Capability to name mapper structure*/ 3533 static const struct { 3534 u32 capability; 3535 char *name; 3536 } mpi3mr_capabilities[] = { 3537 { MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE, "RAID" }, 3538 { MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED, "MultiPath" }, 3539 }; 3540 3541 /** 3542 * mpi3mr_print_ioc_info - Display controller information 3543 * @mrioc: Adapter instance reference 3544 * 3545 * Display controller personalit, capability, supported 3546 * protocols etc. 3547 * 3548 * Return: Nothing 3549 */ 3550 static void 3551 mpi3mr_print_ioc_info(struct mpi3mr_ioc *mrioc) 3552 { 3553 int i = 0, bytes_written = 0; 3554 char personality[16]; 3555 char protocol[50] = {0}; 3556 char capabilities[100] = {0}; 3557 struct mpi3mr_compimg_ver *fwver = &mrioc->facts.fw_ver; 3558 3559 switch (mrioc->facts.personality) { 3560 case MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA: 3561 strncpy(personality, "Enhanced HBA", sizeof(personality)); 3562 break; 3563 case MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR: 3564 strncpy(personality, "RAID", sizeof(personality)); 3565 break; 3566 default: 3567 strncpy(personality, "Unknown", sizeof(personality)); 3568 break; 3569 } 3570 3571 ioc_info(mrioc, "Running in %s Personality", personality); 3572 3573 ioc_info(mrioc, "FW version(%d.%d.%d.%d.%d.%d)\n", 3574 fwver->gen_major, fwver->gen_minor, fwver->ph_major, 3575 fwver->ph_minor, fwver->cust_id, fwver->build_num); 3576 3577 for (i = 0; i < ARRAY_SIZE(mpi3mr_protocols); i++) { 3578 if (mrioc->facts.protocol_flags & 3579 mpi3mr_protocols[i].protocol) { 3580 bytes_written += scnprintf(protocol + bytes_written, 3581 sizeof(protocol) - bytes_written, "%s%s", 3582 bytes_written ? "," : "", 3583 mpi3mr_protocols[i].name); 3584 } 3585 } 3586 3587 bytes_written = 0; 3588 for (i = 0; i < ARRAY_SIZE(mpi3mr_capabilities); i++) { 3589 if (mrioc->facts.protocol_flags & 3590 mpi3mr_capabilities[i].capability) { 3591 bytes_written += scnprintf(capabilities + bytes_written, 3592 sizeof(capabilities) - bytes_written, "%s%s", 3593 bytes_written ? "," : "", 3594 mpi3mr_capabilities[i].name); 3595 } 3596 } 3597 3598 ioc_info(mrioc, "Protocol=(%s), Capabilities=(%s)\n", 3599 protocol, capabilities); 3600 } 3601 3602 /** 3603 * mpi3mr_cleanup_resources - Free PCI resources 3604 * @mrioc: Adapter instance reference 3605 * 3606 * Unmap PCI device memory and disable PCI device. 3607 * 3608 * Return: 0 on success and non-zero on failure. 3609 */ 3610 void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc) 3611 { 3612 struct pci_dev *pdev = mrioc->pdev; 3613 3614 mpi3mr_cleanup_isr(mrioc); 3615 3616 if (mrioc->sysif_regs) { 3617 iounmap((void __iomem *)mrioc->sysif_regs); 3618 mrioc->sysif_regs = NULL; 3619 } 3620 3621 if (pci_is_enabled(pdev)) { 3622 if (mrioc->bars) 3623 pci_release_selected_regions(pdev, mrioc->bars); 3624 pci_disable_device(pdev); 3625 } 3626 } 3627 3628 /** 3629 * mpi3mr_setup_resources - Enable PCI resources 3630 * @mrioc: Adapter instance reference 3631 * 3632 * Enable PCI device memory, MSI-x registers and set DMA mask. 3633 * 3634 * Return: 0 on success and non-zero on failure. 3635 */ 3636 int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc) 3637 { 3638 struct pci_dev *pdev = mrioc->pdev; 3639 u32 memap_sz = 0; 3640 int i, retval = 0, capb = 0; 3641 u16 message_control; 3642 u64 dma_mask = mrioc->dma_mask ? mrioc->dma_mask : 3643 ((sizeof(dma_addr_t) > 4) ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32)); 3644 3645 if (pci_enable_device_mem(pdev)) { 3646 ioc_err(mrioc, "pci_enable_device_mem: failed\n"); 3647 retval = -ENODEV; 3648 goto out_failed; 3649 } 3650 3651 capb = pci_find_capability(pdev, PCI_CAP_ID_MSIX); 3652 if (!capb) { 3653 ioc_err(mrioc, "Unable to find MSI-X Capabilities\n"); 3654 retval = -ENODEV; 3655 goto out_failed; 3656 } 3657 mrioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); 3658 3659 if (pci_request_selected_regions(pdev, mrioc->bars, 3660 mrioc->driver_name)) { 3661 ioc_err(mrioc, "pci_request_selected_regions: failed\n"); 3662 retval = -ENODEV; 3663 goto out_failed; 3664 } 3665 3666 for (i = 0; (i < DEVICE_COUNT_RESOURCE); i++) { 3667 if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { 3668 mrioc->sysif_regs_phys = pci_resource_start(pdev, i); 3669 memap_sz = pci_resource_len(pdev, i); 3670 mrioc->sysif_regs = 3671 ioremap(mrioc->sysif_regs_phys, memap_sz); 3672 break; 3673 } 3674 } 3675 3676 pci_set_master(pdev); 3677 3678 retval = dma_set_mask_and_coherent(&pdev->dev, dma_mask); 3679 if (retval) { 3680 if (dma_mask != DMA_BIT_MASK(32)) { 3681 ioc_warn(mrioc, "Setting 64 bit DMA mask failed\n"); 3682 dma_mask = DMA_BIT_MASK(32); 3683 retval = dma_set_mask_and_coherent(&pdev->dev, 3684 dma_mask); 3685 } 3686 if (retval) { 3687 mrioc->dma_mask = 0; 3688 ioc_err(mrioc, "Setting 32 bit DMA mask also failed\n"); 3689 goto out_failed; 3690 } 3691 } 3692 mrioc->dma_mask = dma_mask; 3693 3694 if (!mrioc->sysif_regs) { 3695 ioc_err(mrioc, 3696 "Unable to map adapter memory or resource not found\n"); 3697 retval = -EINVAL; 3698 goto out_failed; 3699 } 3700 3701 pci_read_config_word(pdev, capb + 2, &message_control); 3702 mrioc->msix_count = (message_control & 0x3FF) + 1; 3703 3704 pci_save_state(pdev); 3705 3706 pci_set_drvdata(pdev, mrioc->shost); 3707 3708 mpi3mr_ioc_disable_intr(mrioc); 3709 3710 ioc_info(mrioc, "iomem(0x%016llx), mapped(0x%p), size(%d)\n", 3711 (unsigned long long)mrioc->sysif_regs_phys, 3712 mrioc->sysif_regs, memap_sz); 3713 ioc_info(mrioc, "Number of MSI-X vectors found in capabilities: (%d)\n", 3714 mrioc->msix_count); 3715 3716 if (!reset_devices && poll_queues > 0) 3717 mrioc->requested_poll_qcount = min_t(int, poll_queues, 3718 mrioc->msix_count - 2); 3719 return retval; 3720 3721 out_failed: 3722 mpi3mr_cleanup_resources(mrioc); 3723 return retval; 3724 } 3725 3726 /** 3727 * mpi3mr_enable_events - Enable required events 3728 * @mrioc: Adapter instance reference 3729 * 3730 * This routine unmasks the events required by the driver by 3731 * sennding appropriate event mask bitmapt through an event 3732 * notification request. 3733 * 3734 * Return: 0 on success and non-zero on failure. 3735 */ 3736 static int mpi3mr_enable_events(struct mpi3mr_ioc *mrioc) 3737 { 3738 int retval = 0; 3739 u32 i; 3740 3741 for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) 3742 mrioc->event_masks[i] = -1; 3743 3744 mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_ADDED); 3745 mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_INFO_CHANGED); 3746 mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_STATUS_CHANGE); 3747 mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE); 3748 mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENCL_DEVICE_ADDED); 3749 mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST); 3750 mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DISCOVERY); 3751 mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR); 3752 mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_BROADCAST_PRIMITIVE); 3753 mpi3mr_unmask_events(mrioc, MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST); 3754 mpi3mr_unmask_events(mrioc, MPI3_EVENT_PCIE_ENUMERATION); 3755 mpi3mr_unmask_events(mrioc, MPI3_EVENT_PREPARE_FOR_RESET); 3756 mpi3mr_unmask_events(mrioc, MPI3_EVENT_CABLE_MGMT); 3757 mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENERGY_PACK_CHANGE); 3758 3759 retval = mpi3mr_issue_event_notification(mrioc); 3760 if (retval) 3761 ioc_err(mrioc, "failed to issue event notification %d\n", 3762 retval); 3763 return retval; 3764 } 3765 3766 /** 3767 * mpi3mr_init_ioc - Initialize the controller 3768 * @mrioc: Adapter instance reference 3769 * 3770 * This the controller initialization routine, executed either 3771 * after soft reset or from pci probe callback. 3772 * Setup the required resources, memory map the controller 3773 * registers, create admin and operational reply queue pairs, 3774 * allocate required memory for reply pool, sense buffer pool, 3775 * issue IOC init request to the firmware, unmask the events and 3776 * issue port enable to discover SAS/SATA/NVMe devies and RAID 3777 * volumes. 3778 * 3779 * Return: 0 on success and non-zero on failure. 3780 */ 3781 int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc) 3782 { 3783 int retval = 0; 3784 u8 retry = 0; 3785 struct mpi3_ioc_facts_data facts_data; 3786 u32 sz; 3787 3788 retry_init: 3789 retval = mpi3mr_bring_ioc_ready(mrioc); 3790 if (retval) { 3791 ioc_err(mrioc, "Failed to bring ioc ready: error %d\n", 3792 retval); 3793 goto out_failed_noretry; 3794 } 3795 3796 retval = mpi3mr_setup_isr(mrioc, 1); 3797 if (retval) { 3798 ioc_err(mrioc, "Failed to setup ISR error %d\n", 3799 retval); 3800 goto out_failed_noretry; 3801 } 3802 3803 retval = mpi3mr_issue_iocfacts(mrioc, &facts_data); 3804 if (retval) { 3805 ioc_err(mrioc, "Failed to Issue IOC Facts %d\n", 3806 retval); 3807 goto out_failed; 3808 } 3809 3810 mrioc->max_host_ios = mrioc->facts.max_reqs - MPI3MR_INTERNAL_CMDS_RESVD; 3811 3812 mrioc->num_io_throttle_group = mrioc->facts.max_io_throttle_group; 3813 atomic_set(&mrioc->pend_large_data_sz, 0); 3814 3815 if (reset_devices) 3816 mrioc->max_host_ios = min_t(int, mrioc->max_host_ios, 3817 MPI3MR_HOST_IOS_KDUMP); 3818 3819 if (!(mrioc->facts.ioc_capabilities & 3820 MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED)) { 3821 mrioc->sas_transport_enabled = 1; 3822 mrioc->scsi_device_channel = 1; 3823 mrioc->shost->max_channel = 1; 3824 mrioc->shost->transportt = mpi3mr_transport_template; 3825 } 3826 3827 mrioc->reply_sz = mrioc->facts.reply_sz; 3828 3829 retval = mpi3mr_check_reset_dma_mask(mrioc); 3830 if (retval) { 3831 ioc_err(mrioc, "Resetting dma mask failed %d\n", 3832 retval); 3833 goto out_failed_noretry; 3834 } 3835 3836 mpi3mr_print_ioc_info(mrioc); 3837 3838 if (!mrioc->cfg_page) { 3839 dprint_init(mrioc, "allocating config page buffers\n"); 3840 mrioc->cfg_page_sz = MPI3MR_DEFAULT_CFG_PAGE_SZ; 3841 mrioc->cfg_page = dma_alloc_coherent(&mrioc->pdev->dev, 3842 mrioc->cfg_page_sz, &mrioc->cfg_page_dma, GFP_KERNEL); 3843 if (!mrioc->cfg_page) { 3844 retval = -1; 3845 goto out_failed_noretry; 3846 } 3847 } 3848 3849 if (!mrioc->init_cmds.reply) { 3850 retval = mpi3mr_alloc_reply_sense_bufs(mrioc); 3851 if (retval) { 3852 ioc_err(mrioc, 3853 "%s :Failed to allocated reply sense buffers %d\n", 3854 __func__, retval); 3855 goto out_failed_noretry; 3856 } 3857 } 3858 3859 if (!mrioc->chain_sgl_list) { 3860 retval = mpi3mr_alloc_chain_bufs(mrioc); 3861 if (retval) { 3862 ioc_err(mrioc, "Failed to allocated chain buffers %d\n", 3863 retval); 3864 goto out_failed_noretry; 3865 } 3866 } 3867 3868 retval = mpi3mr_issue_iocinit(mrioc); 3869 if (retval) { 3870 ioc_err(mrioc, "Failed to Issue IOC Init %d\n", 3871 retval); 3872 goto out_failed; 3873 } 3874 3875 retval = mpi3mr_print_pkg_ver(mrioc); 3876 if (retval) { 3877 ioc_err(mrioc, "failed to get package version\n"); 3878 goto out_failed; 3879 } 3880 3881 retval = mpi3mr_setup_isr(mrioc, 0); 3882 if (retval) { 3883 ioc_err(mrioc, "Failed to re-setup ISR, error %d\n", 3884 retval); 3885 goto out_failed_noretry; 3886 } 3887 3888 retval = mpi3mr_create_op_queues(mrioc); 3889 if (retval) { 3890 ioc_err(mrioc, "Failed to create OpQueues error %d\n", 3891 retval); 3892 goto out_failed; 3893 } 3894 3895 if (!mrioc->pel_seqnum_virt) { 3896 dprint_init(mrioc, "allocating memory for pel_seqnum_virt\n"); 3897 mrioc->pel_seqnum_sz = sizeof(struct mpi3_pel_seq); 3898 mrioc->pel_seqnum_virt = dma_alloc_coherent(&mrioc->pdev->dev, 3899 mrioc->pel_seqnum_sz, &mrioc->pel_seqnum_dma, 3900 GFP_KERNEL); 3901 if (!mrioc->pel_seqnum_virt) { 3902 retval = -ENOMEM; 3903 goto out_failed_noretry; 3904 } 3905 } 3906 3907 if (!mrioc->throttle_groups && mrioc->num_io_throttle_group) { 3908 dprint_init(mrioc, "allocating memory for throttle groups\n"); 3909 sz = sizeof(struct mpi3mr_throttle_group_info); 3910 mrioc->throttle_groups = kcalloc(mrioc->num_io_throttle_group, sz, GFP_KERNEL); 3911 if (!mrioc->throttle_groups) { 3912 retval = -1; 3913 goto out_failed_noretry; 3914 } 3915 } 3916 3917 retval = mpi3mr_enable_events(mrioc); 3918 if (retval) { 3919 ioc_err(mrioc, "failed to enable events %d\n", 3920 retval); 3921 goto out_failed; 3922 } 3923 3924 ioc_info(mrioc, "controller initialization completed successfully\n"); 3925 return retval; 3926 out_failed: 3927 if (retry < 2) { 3928 retry++; 3929 ioc_warn(mrioc, "retrying controller initialization, retry_count:%d\n", 3930 retry); 3931 mpi3mr_memset_buffers(mrioc); 3932 goto retry_init; 3933 } 3934 retval = -1; 3935 out_failed_noretry: 3936 ioc_err(mrioc, "controller initialization failed\n"); 3937 mpi3mr_issue_reset(mrioc, MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, 3938 MPI3MR_RESET_FROM_CTLR_CLEANUP); 3939 mrioc->unrecoverable = 1; 3940 return retval; 3941 } 3942 3943 /** 3944 * mpi3mr_reinit_ioc - Re-Initialize the controller 3945 * @mrioc: Adapter instance reference 3946 * @is_resume: Called from resume or reset path 3947 * 3948 * This the controller re-initialization routine, executed from 3949 * the soft reset handler or resume callback. Creates 3950 * operational reply queue pairs, allocate required memory for 3951 * reply pool, sense buffer pool, issue IOC init request to the 3952 * firmware, unmask the events and issue port enable to discover 3953 * SAS/SATA/NVMe devices and RAID volumes. 3954 * 3955 * Return: 0 on success and non-zero on failure. 3956 */ 3957 int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume) 3958 { 3959 int retval = 0; 3960 u8 retry = 0; 3961 struct mpi3_ioc_facts_data facts_data; 3962 u32 pe_timeout, ioc_status; 3963 3964 retry_init: 3965 pe_timeout = 3966 (MPI3MR_PORTENABLE_TIMEOUT / MPI3MR_PORTENABLE_POLL_INTERVAL); 3967 3968 dprint_reset(mrioc, "bringing up the controller to ready state\n"); 3969 retval = mpi3mr_bring_ioc_ready(mrioc); 3970 if (retval) { 3971 ioc_err(mrioc, "failed to bring to ready state\n"); 3972 goto out_failed_noretry; 3973 } 3974 3975 if (is_resume) { 3976 dprint_reset(mrioc, "setting up single ISR\n"); 3977 retval = mpi3mr_setup_isr(mrioc, 1); 3978 if (retval) { 3979 ioc_err(mrioc, "failed to setup ISR\n"); 3980 goto out_failed_noretry; 3981 } 3982 } else 3983 mpi3mr_ioc_enable_intr(mrioc); 3984 3985 dprint_reset(mrioc, "getting ioc_facts\n"); 3986 retval = mpi3mr_issue_iocfacts(mrioc, &facts_data); 3987 if (retval) { 3988 ioc_err(mrioc, "failed to get ioc_facts\n"); 3989 goto out_failed; 3990 } 3991 3992 dprint_reset(mrioc, "validating ioc_facts\n"); 3993 retval = mpi3mr_revalidate_factsdata(mrioc); 3994 if (retval) { 3995 ioc_err(mrioc, "failed to revalidate ioc_facts data\n"); 3996 goto out_failed_noretry; 3997 } 3998 3999 mpi3mr_print_ioc_info(mrioc); 4000 4001 dprint_reset(mrioc, "sending ioc_init\n"); 4002 retval = mpi3mr_issue_iocinit(mrioc); 4003 if (retval) { 4004 ioc_err(mrioc, "failed to send ioc_init\n"); 4005 goto out_failed; 4006 } 4007 4008 dprint_reset(mrioc, "getting package version\n"); 4009 retval = mpi3mr_print_pkg_ver(mrioc); 4010 if (retval) { 4011 ioc_err(mrioc, "failed to get package version\n"); 4012 goto out_failed; 4013 } 4014 4015 if (is_resume) { 4016 dprint_reset(mrioc, "setting up multiple ISR\n"); 4017 retval = mpi3mr_setup_isr(mrioc, 0); 4018 if (retval) { 4019 ioc_err(mrioc, "failed to re-setup ISR\n"); 4020 goto out_failed_noretry; 4021 } 4022 } 4023 4024 dprint_reset(mrioc, "creating operational queue pairs\n"); 4025 retval = mpi3mr_create_op_queues(mrioc); 4026 if (retval) { 4027 ioc_err(mrioc, "failed to create operational queue pairs\n"); 4028 goto out_failed; 4029 } 4030 4031 if (!mrioc->pel_seqnum_virt) { 4032 dprint_reset(mrioc, "allocating memory for pel_seqnum_virt\n"); 4033 mrioc->pel_seqnum_sz = sizeof(struct mpi3_pel_seq); 4034 mrioc->pel_seqnum_virt = dma_alloc_coherent(&mrioc->pdev->dev, 4035 mrioc->pel_seqnum_sz, &mrioc->pel_seqnum_dma, 4036 GFP_KERNEL); 4037 if (!mrioc->pel_seqnum_virt) { 4038 retval = -ENOMEM; 4039 goto out_failed_noretry; 4040 } 4041 } 4042 4043 if (mrioc->shost->nr_hw_queues > mrioc->num_op_reply_q) { 4044 ioc_err(mrioc, 4045 "cannot create minimum number of operational queues expected:%d created:%d\n", 4046 mrioc->shost->nr_hw_queues, mrioc->num_op_reply_q); 4047 retval = -1; 4048 goto out_failed_noretry; 4049 } 4050 4051 dprint_reset(mrioc, "enabling events\n"); 4052 retval = mpi3mr_enable_events(mrioc); 4053 if (retval) { 4054 ioc_err(mrioc, "failed to enable events\n"); 4055 goto out_failed; 4056 } 4057 4058 mrioc->device_refresh_on = 1; 4059 mpi3mr_add_event_wait_for_device_refresh(mrioc); 4060 4061 ioc_info(mrioc, "sending port enable\n"); 4062 retval = mpi3mr_issue_port_enable(mrioc, 1); 4063 if (retval) { 4064 ioc_err(mrioc, "failed to issue port enable\n"); 4065 goto out_failed; 4066 } 4067 do { 4068 ssleep(MPI3MR_PORTENABLE_POLL_INTERVAL); 4069 if (mrioc->init_cmds.state == MPI3MR_CMD_NOTUSED) 4070 break; 4071 if (!pci_device_is_present(mrioc->pdev)) 4072 mrioc->unrecoverable = 1; 4073 if (mrioc->unrecoverable) { 4074 retval = -1; 4075 goto out_failed_noretry; 4076 } 4077 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 4078 if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) || 4079 (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT)) { 4080 mpi3mr_print_fault_info(mrioc); 4081 mrioc->init_cmds.is_waiting = 0; 4082 mrioc->init_cmds.callback = NULL; 4083 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 4084 goto out_failed; 4085 } 4086 } while (--pe_timeout); 4087 4088 if (!pe_timeout) { 4089 ioc_err(mrioc, "port enable timed out\n"); 4090 mpi3mr_check_rh_fault_ioc(mrioc, 4091 MPI3MR_RESET_FROM_PE_TIMEOUT); 4092 mrioc->init_cmds.is_waiting = 0; 4093 mrioc->init_cmds.callback = NULL; 4094 mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; 4095 goto out_failed; 4096 } else if (mrioc->scan_failed) { 4097 ioc_err(mrioc, 4098 "port enable failed with status=0x%04x\n", 4099 mrioc->scan_failed); 4100 } else 4101 ioc_info(mrioc, "port enable completed successfully\n"); 4102 4103 ioc_info(mrioc, "controller %s completed successfully\n", 4104 (is_resume)?"resume":"re-initialization"); 4105 return retval; 4106 out_failed: 4107 if (retry < 2) { 4108 retry++; 4109 ioc_warn(mrioc, "retrying controller %s, retry_count:%d\n", 4110 (is_resume)?"resume":"re-initialization", retry); 4111 mpi3mr_memset_buffers(mrioc); 4112 goto retry_init; 4113 } 4114 retval = -1; 4115 out_failed_noretry: 4116 ioc_err(mrioc, "controller %s is failed\n", 4117 (is_resume)?"resume":"re-initialization"); 4118 mpi3mr_issue_reset(mrioc, MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, 4119 MPI3MR_RESET_FROM_CTLR_CLEANUP); 4120 mrioc->unrecoverable = 1; 4121 return retval; 4122 } 4123 4124 /** 4125 * mpi3mr_memset_op_reply_q_buffers - memset the operational reply queue's 4126 * segments 4127 * @mrioc: Adapter instance reference 4128 * @qidx: Operational reply queue index 4129 * 4130 * Return: Nothing. 4131 */ 4132 static void mpi3mr_memset_op_reply_q_buffers(struct mpi3mr_ioc *mrioc, u16 qidx) 4133 { 4134 struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx; 4135 struct segments *segments; 4136 int i, size; 4137 4138 if (!op_reply_q->q_segments) 4139 return; 4140 4141 size = op_reply_q->segment_qd * mrioc->op_reply_desc_sz; 4142 segments = op_reply_q->q_segments; 4143 for (i = 0; i < op_reply_q->num_segments; i++) 4144 memset(segments[i].segment, 0, size); 4145 } 4146 4147 /** 4148 * mpi3mr_memset_op_req_q_buffers - memset the operational request queue's 4149 * segments 4150 * @mrioc: Adapter instance reference 4151 * @qidx: Operational request queue index 4152 * 4153 * Return: Nothing. 4154 */ 4155 static void mpi3mr_memset_op_req_q_buffers(struct mpi3mr_ioc *mrioc, u16 qidx) 4156 { 4157 struct op_req_qinfo *op_req_q = mrioc->req_qinfo + qidx; 4158 struct segments *segments; 4159 int i, size; 4160 4161 if (!op_req_q->q_segments) 4162 return; 4163 4164 size = op_req_q->segment_qd * mrioc->facts.op_req_sz; 4165 segments = op_req_q->q_segments; 4166 for (i = 0; i < op_req_q->num_segments; i++) 4167 memset(segments[i].segment, 0, size); 4168 } 4169 4170 /** 4171 * mpi3mr_memset_buffers - memset memory for a controller 4172 * @mrioc: Adapter instance reference 4173 * 4174 * clear all the memory allocated for a controller, typically 4175 * called post reset to reuse the memory allocated during the 4176 * controller init. 4177 * 4178 * Return: Nothing. 4179 */ 4180 void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc) 4181 { 4182 u16 i; 4183 struct mpi3mr_throttle_group_info *tg; 4184 4185 mrioc->change_count = 0; 4186 mrioc->active_poll_qcount = 0; 4187 mrioc->default_qcount = 0; 4188 if (mrioc->admin_req_base) 4189 memset(mrioc->admin_req_base, 0, mrioc->admin_req_q_sz); 4190 if (mrioc->admin_reply_base) 4191 memset(mrioc->admin_reply_base, 0, mrioc->admin_reply_q_sz); 4192 atomic_set(&mrioc->admin_reply_q_in_use, 0); 4193 4194 if (mrioc->init_cmds.reply) { 4195 memset(mrioc->init_cmds.reply, 0, sizeof(*mrioc->init_cmds.reply)); 4196 memset(mrioc->bsg_cmds.reply, 0, 4197 sizeof(*mrioc->bsg_cmds.reply)); 4198 memset(mrioc->host_tm_cmds.reply, 0, 4199 sizeof(*mrioc->host_tm_cmds.reply)); 4200 memset(mrioc->pel_cmds.reply, 0, 4201 sizeof(*mrioc->pel_cmds.reply)); 4202 memset(mrioc->pel_abort_cmd.reply, 0, 4203 sizeof(*mrioc->pel_abort_cmd.reply)); 4204 memset(mrioc->transport_cmds.reply, 0, 4205 sizeof(*mrioc->transport_cmds.reply)); 4206 for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) 4207 memset(mrioc->dev_rmhs_cmds[i].reply, 0, 4208 sizeof(*mrioc->dev_rmhs_cmds[i].reply)); 4209 for (i = 0; i < MPI3MR_NUM_EVTACKCMD; i++) 4210 memset(mrioc->evtack_cmds[i].reply, 0, 4211 sizeof(*mrioc->evtack_cmds[i].reply)); 4212 bitmap_clear(mrioc->removepend_bitmap, 0, 4213 mrioc->dev_handle_bitmap_bits); 4214 bitmap_clear(mrioc->devrem_bitmap, 0, MPI3MR_NUM_DEVRMCMD); 4215 bitmap_clear(mrioc->evtack_cmds_bitmap, 0, 4216 MPI3MR_NUM_EVTACKCMD); 4217 } 4218 4219 for (i = 0; i < mrioc->num_queues; i++) { 4220 mrioc->op_reply_qinfo[i].qid = 0; 4221 mrioc->op_reply_qinfo[i].ci = 0; 4222 mrioc->op_reply_qinfo[i].num_replies = 0; 4223 mrioc->op_reply_qinfo[i].ephase = 0; 4224 atomic_set(&mrioc->op_reply_qinfo[i].pend_ios, 0); 4225 atomic_set(&mrioc->op_reply_qinfo[i].in_use, 0); 4226 mpi3mr_memset_op_reply_q_buffers(mrioc, i); 4227 4228 mrioc->req_qinfo[i].ci = 0; 4229 mrioc->req_qinfo[i].pi = 0; 4230 mrioc->req_qinfo[i].num_requests = 0; 4231 mrioc->req_qinfo[i].qid = 0; 4232 mrioc->req_qinfo[i].reply_qid = 0; 4233 spin_lock_init(&mrioc->req_qinfo[i].q_lock); 4234 mpi3mr_memset_op_req_q_buffers(mrioc, i); 4235 } 4236 4237 atomic_set(&mrioc->pend_large_data_sz, 0); 4238 if (mrioc->throttle_groups) { 4239 tg = mrioc->throttle_groups; 4240 for (i = 0; i < mrioc->num_io_throttle_group; i++, tg++) { 4241 tg->id = 0; 4242 tg->fw_qd = 0; 4243 tg->modified_qd = 0; 4244 tg->io_divert = 0; 4245 tg->need_qd_reduction = 0; 4246 tg->high = 0; 4247 tg->low = 0; 4248 tg->qd_reduction = 0; 4249 atomic_set(&tg->pend_large_data_sz, 0); 4250 } 4251 } 4252 } 4253 4254 /** 4255 * mpi3mr_free_mem - Free memory allocated for a controller 4256 * @mrioc: Adapter instance reference 4257 * 4258 * Free all the memory allocated for a controller. 4259 * 4260 * Return: Nothing. 4261 */ 4262 void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc) 4263 { 4264 u16 i; 4265 struct mpi3mr_intr_info *intr_info; 4266 4267 mpi3mr_free_enclosure_list(mrioc); 4268 4269 if (mrioc->sense_buf_pool) { 4270 if (mrioc->sense_buf) 4271 dma_pool_free(mrioc->sense_buf_pool, mrioc->sense_buf, 4272 mrioc->sense_buf_dma); 4273 dma_pool_destroy(mrioc->sense_buf_pool); 4274 mrioc->sense_buf = NULL; 4275 mrioc->sense_buf_pool = NULL; 4276 } 4277 if (mrioc->sense_buf_q_pool) { 4278 if (mrioc->sense_buf_q) 4279 dma_pool_free(mrioc->sense_buf_q_pool, 4280 mrioc->sense_buf_q, mrioc->sense_buf_q_dma); 4281 dma_pool_destroy(mrioc->sense_buf_q_pool); 4282 mrioc->sense_buf_q = NULL; 4283 mrioc->sense_buf_q_pool = NULL; 4284 } 4285 4286 if (mrioc->reply_buf_pool) { 4287 if (mrioc->reply_buf) 4288 dma_pool_free(mrioc->reply_buf_pool, mrioc->reply_buf, 4289 mrioc->reply_buf_dma); 4290 dma_pool_destroy(mrioc->reply_buf_pool); 4291 mrioc->reply_buf = NULL; 4292 mrioc->reply_buf_pool = NULL; 4293 } 4294 if (mrioc->reply_free_q_pool) { 4295 if (mrioc->reply_free_q) 4296 dma_pool_free(mrioc->reply_free_q_pool, 4297 mrioc->reply_free_q, mrioc->reply_free_q_dma); 4298 dma_pool_destroy(mrioc->reply_free_q_pool); 4299 mrioc->reply_free_q = NULL; 4300 mrioc->reply_free_q_pool = NULL; 4301 } 4302 4303 for (i = 0; i < mrioc->num_op_req_q; i++) 4304 mpi3mr_free_op_req_q_segments(mrioc, i); 4305 4306 for (i = 0; i < mrioc->num_op_reply_q; i++) 4307 mpi3mr_free_op_reply_q_segments(mrioc, i); 4308 4309 for (i = 0; i < mrioc->intr_info_count; i++) { 4310 intr_info = mrioc->intr_info + i; 4311 intr_info->op_reply_q = NULL; 4312 } 4313 4314 kfree(mrioc->req_qinfo); 4315 mrioc->req_qinfo = NULL; 4316 mrioc->num_op_req_q = 0; 4317 4318 kfree(mrioc->op_reply_qinfo); 4319 mrioc->op_reply_qinfo = NULL; 4320 mrioc->num_op_reply_q = 0; 4321 4322 kfree(mrioc->init_cmds.reply); 4323 mrioc->init_cmds.reply = NULL; 4324 4325 kfree(mrioc->bsg_cmds.reply); 4326 mrioc->bsg_cmds.reply = NULL; 4327 4328 kfree(mrioc->host_tm_cmds.reply); 4329 mrioc->host_tm_cmds.reply = NULL; 4330 4331 kfree(mrioc->pel_cmds.reply); 4332 mrioc->pel_cmds.reply = NULL; 4333 4334 kfree(mrioc->pel_abort_cmd.reply); 4335 mrioc->pel_abort_cmd.reply = NULL; 4336 4337 for (i = 0; i < MPI3MR_NUM_EVTACKCMD; i++) { 4338 kfree(mrioc->evtack_cmds[i].reply); 4339 mrioc->evtack_cmds[i].reply = NULL; 4340 } 4341 4342 bitmap_free(mrioc->removepend_bitmap); 4343 mrioc->removepend_bitmap = NULL; 4344 4345 bitmap_free(mrioc->devrem_bitmap); 4346 mrioc->devrem_bitmap = NULL; 4347 4348 bitmap_free(mrioc->evtack_cmds_bitmap); 4349 mrioc->evtack_cmds_bitmap = NULL; 4350 4351 bitmap_free(mrioc->chain_bitmap); 4352 mrioc->chain_bitmap = NULL; 4353 4354 kfree(mrioc->transport_cmds.reply); 4355 mrioc->transport_cmds.reply = NULL; 4356 4357 for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { 4358 kfree(mrioc->dev_rmhs_cmds[i].reply); 4359 mrioc->dev_rmhs_cmds[i].reply = NULL; 4360 } 4361 4362 if (mrioc->chain_buf_pool) { 4363 for (i = 0; i < mrioc->chain_buf_count; i++) { 4364 if (mrioc->chain_sgl_list[i].addr) { 4365 dma_pool_free(mrioc->chain_buf_pool, 4366 mrioc->chain_sgl_list[i].addr, 4367 mrioc->chain_sgl_list[i].dma_addr); 4368 mrioc->chain_sgl_list[i].addr = NULL; 4369 } 4370 } 4371 dma_pool_destroy(mrioc->chain_buf_pool); 4372 mrioc->chain_buf_pool = NULL; 4373 } 4374 4375 kfree(mrioc->chain_sgl_list); 4376 mrioc->chain_sgl_list = NULL; 4377 4378 if (mrioc->admin_reply_base) { 4379 dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_reply_q_sz, 4380 mrioc->admin_reply_base, mrioc->admin_reply_dma); 4381 mrioc->admin_reply_base = NULL; 4382 } 4383 if (mrioc->admin_req_base) { 4384 dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_req_q_sz, 4385 mrioc->admin_req_base, mrioc->admin_req_dma); 4386 mrioc->admin_req_base = NULL; 4387 } 4388 if (mrioc->cfg_page) { 4389 dma_free_coherent(&mrioc->pdev->dev, mrioc->cfg_page_sz, 4390 mrioc->cfg_page, mrioc->cfg_page_dma); 4391 mrioc->cfg_page = NULL; 4392 } 4393 if (mrioc->pel_seqnum_virt) { 4394 dma_free_coherent(&mrioc->pdev->dev, mrioc->pel_seqnum_sz, 4395 mrioc->pel_seqnum_virt, mrioc->pel_seqnum_dma); 4396 mrioc->pel_seqnum_virt = NULL; 4397 } 4398 4399 kfree(mrioc->throttle_groups); 4400 mrioc->throttle_groups = NULL; 4401 4402 kfree(mrioc->logdata_buf); 4403 mrioc->logdata_buf = NULL; 4404 4405 } 4406 4407 /** 4408 * mpi3mr_issue_ioc_shutdown - shutdown controller 4409 * @mrioc: Adapter instance reference 4410 * 4411 * Send shutodwn notification to the controller and wait for the 4412 * shutdown_timeout for it to be completed. 4413 * 4414 * Return: Nothing. 4415 */ 4416 static void mpi3mr_issue_ioc_shutdown(struct mpi3mr_ioc *mrioc) 4417 { 4418 u32 ioc_config, ioc_status; 4419 u8 retval = 1; 4420 u32 timeout = MPI3MR_DEFAULT_SHUTDOWN_TIME * 10; 4421 4422 ioc_info(mrioc, "Issuing shutdown Notification\n"); 4423 if (mrioc->unrecoverable) { 4424 ioc_warn(mrioc, 4425 "IOC is unrecoverable shutdown is not issued\n"); 4426 return; 4427 } 4428 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 4429 if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK) 4430 == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS) { 4431 ioc_info(mrioc, "shutdown already in progress\n"); 4432 return; 4433 } 4434 4435 ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); 4436 ioc_config |= MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL; 4437 ioc_config |= MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN_SEND_REQ; 4438 4439 writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); 4440 4441 if (mrioc->facts.shutdown_timeout) 4442 timeout = mrioc->facts.shutdown_timeout * 10; 4443 4444 do { 4445 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 4446 if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK) 4447 == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_COMPLETE) { 4448 retval = 0; 4449 break; 4450 } 4451 msleep(100); 4452 } while (--timeout); 4453 4454 ioc_status = readl(&mrioc->sysif_regs->ioc_status); 4455 ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); 4456 4457 if (retval) { 4458 if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK) 4459 == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS) 4460 ioc_warn(mrioc, 4461 "shutdown still in progress after timeout\n"); 4462 } 4463 4464 ioc_info(mrioc, 4465 "Base IOC Sts/Config after %s shutdown is (0x%x)/(0x%x)\n", 4466 (!retval) ? "successful" : "failed", ioc_status, 4467 ioc_config); 4468 } 4469 4470 /** 4471 * mpi3mr_cleanup_ioc - Cleanup controller 4472 * @mrioc: Adapter instance reference 4473 * 4474 * controller cleanup handler, Message unit reset or soft reset 4475 * and shutdown notification is issued to the controller. 4476 * 4477 * Return: Nothing. 4478 */ 4479 void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc) 4480 { 4481 enum mpi3mr_iocstate ioc_state; 4482 4483 dprint_exit(mrioc, "cleaning up the controller\n"); 4484 mpi3mr_ioc_disable_intr(mrioc); 4485 4486 ioc_state = mpi3mr_get_iocstate(mrioc); 4487 4488 if ((!mrioc->unrecoverable) && (!mrioc->reset_in_progress) && 4489 (ioc_state == MRIOC_STATE_READY)) { 4490 if (mpi3mr_issue_and_process_mur(mrioc, 4491 MPI3MR_RESET_FROM_CTLR_CLEANUP)) 4492 mpi3mr_issue_reset(mrioc, 4493 MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, 4494 MPI3MR_RESET_FROM_MUR_FAILURE); 4495 mpi3mr_issue_ioc_shutdown(mrioc); 4496 } 4497 dprint_exit(mrioc, "controller cleanup completed\n"); 4498 } 4499 4500 /** 4501 * mpi3mr_drv_cmd_comp_reset - Flush a internal driver command 4502 * @mrioc: Adapter instance reference 4503 * @cmdptr: Internal command tracker 4504 * 4505 * Complete an internal driver commands with state indicating it 4506 * is completed due to reset. 4507 * 4508 * Return: Nothing. 4509 */ 4510 static inline void mpi3mr_drv_cmd_comp_reset(struct mpi3mr_ioc *mrioc, 4511 struct mpi3mr_drv_cmd *cmdptr) 4512 { 4513 if (cmdptr->state & MPI3MR_CMD_PENDING) { 4514 cmdptr->state |= MPI3MR_CMD_RESET; 4515 cmdptr->state &= ~MPI3MR_CMD_PENDING; 4516 if (cmdptr->is_waiting) { 4517 complete(&cmdptr->done); 4518 cmdptr->is_waiting = 0; 4519 } else if (cmdptr->callback) 4520 cmdptr->callback(mrioc, cmdptr); 4521 } 4522 } 4523 4524 /** 4525 * mpi3mr_flush_drv_cmds - Flush internaldriver commands 4526 * @mrioc: Adapter instance reference 4527 * 4528 * Flush all internal driver commands post reset 4529 * 4530 * Return: Nothing. 4531 */ 4532 void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc) 4533 { 4534 struct mpi3mr_drv_cmd *cmdptr; 4535 u8 i; 4536 4537 cmdptr = &mrioc->init_cmds; 4538 mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); 4539 4540 cmdptr = &mrioc->cfg_cmds; 4541 mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); 4542 4543 cmdptr = &mrioc->bsg_cmds; 4544 mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); 4545 cmdptr = &mrioc->host_tm_cmds; 4546 mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); 4547 4548 for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { 4549 cmdptr = &mrioc->dev_rmhs_cmds[i]; 4550 mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); 4551 } 4552 4553 for (i = 0; i < MPI3MR_NUM_EVTACKCMD; i++) { 4554 cmdptr = &mrioc->evtack_cmds[i]; 4555 mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); 4556 } 4557 4558 cmdptr = &mrioc->pel_cmds; 4559 mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); 4560 4561 cmdptr = &mrioc->pel_abort_cmd; 4562 mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); 4563 4564 cmdptr = &mrioc->transport_cmds; 4565 mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); 4566 } 4567 4568 /** 4569 * mpi3mr_pel_wait_post - Issue PEL Wait 4570 * @mrioc: Adapter instance reference 4571 * @drv_cmd: Internal command tracker 4572 * 4573 * Issue PEL Wait MPI request through admin queue and return. 4574 * 4575 * Return: Nothing. 4576 */ 4577 static void mpi3mr_pel_wait_post(struct mpi3mr_ioc *mrioc, 4578 struct mpi3mr_drv_cmd *drv_cmd) 4579 { 4580 struct mpi3_pel_req_action_wait pel_wait; 4581 4582 mrioc->pel_abort_requested = false; 4583 4584 memset(&pel_wait, 0, sizeof(pel_wait)); 4585 drv_cmd->state = MPI3MR_CMD_PENDING; 4586 drv_cmd->is_waiting = 0; 4587 drv_cmd->callback = mpi3mr_pel_wait_complete; 4588 drv_cmd->ioc_status = 0; 4589 drv_cmd->ioc_loginfo = 0; 4590 pel_wait.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_PEL_WAIT); 4591 pel_wait.function = MPI3_FUNCTION_PERSISTENT_EVENT_LOG; 4592 pel_wait.action = MPI3_PEL_ACTION_WAIT; 4593 pel_wait.starting_sequence_number = cpu_to_le32(mrioc->pel_newest_seqnum); 4594 pel_wait.locale = cpu_to_le16(mrioc->pel_locale); 4595 pel_wait.class = cpu_to_le16(mrioc->pel_class); 4596 pel_wait.wait_time = MPI3_PEL_WAITTIME_INFINITE_WAIT; 4597 dprint_bsg_info(mrioc, "sending pel_wait seqnum(%d), class(%d), locale(0x%08x)\n", 4598 mrioc->pel_newest_seqnum, mrioc->pel_class, mrioc->pel_locale); 4599 4600 if (mpi3mr_admin_request_post(mrioc, &pel_wait, sizeof(pel_wait), 0)) { 4601 dprint_bsg_err(mrioc, 4602 "Issuing PELWait: Admin post failed\n"); 4603 drv_cmd->state = MPI3MR_CMD_NOTUSED; 4604 drv_cmd->callback = NULL; 4605 drv_cmd->retry_count = 0; 4606 mrioc->pel_enabled = false; 4607 } 4608 } 4609 4610 /** 4611 * mpi3mr_pel_get_seqnum_post - Issue PEL Get Sequence number 4612 * @mrioc: Adapter instance reference 4613 * @drv_cmd: Internal command tracker 4614 * 4615 * Issue PEL get sequence number MPI request through admin queue 4616 * and return. 4617 * 4618 * Return: 0 on success, non-zero on failure. 4619 */ 4620 int mpi3mr_pel_get_seqnum_post(struct mpi3mr_ioc *mrioc, 4621 struct mpi3mr_drv_cmd *drv_cmd) 4622 { 4623 struct mpi3_pel_req_action_get_sequence_numbers pel_getseq_req; 4624 u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; 4625 int retval = 0; 4626 4627 memset(&pel_getseq_req, 0, sizeof(pel_getseq_req)); 4628 mrioc->pel_cmds.state = MPI3MR_CMD_PENDING; 4629 mrioc->pel_cmds.is_waiting = 0; 4630 mrioc->pel_cmds.ioc_status = 0; 4631 mrioc->pel_cmds.ioc_loginfo = 0; 4632 mrioc->pel_cmds.callback = mpi3mr_pel_get_seqnum_complete; 4633 pel_getseq_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_PEL_WAIT); 4634 pel_getseq_req.function = MPI3_FUNCTION_PERSISTENT_EVENT_LOG; 4635 pel_getseq_req.action = MPI3_PEL_ACTION_GET_SEQNUM; 4636 mpi3mr_add_sg_single(&pel_getseq_req.sgl, sgl_flags, 4637 mrioc->pel_seqnum_sz, mrioc->pel_seqnum_dma); 4638 4639 retval = mpi3mr_admin_request_post(mrioc, &pel_getseq_req, 4640 sizeof(pel_getseq_req), 0); 4641 if (retval) { 4642 if (drv_cmd) { 4643 drv_cmd->state = MPI3MR_CMD_NOTUSED; 4644 drv_cmd->callback = NULL; 4645 drv_cmd->retry_count = 0; 4646 } 4647 mrioc->pel_enabled = false; 4648 } 4649 4650 return retval; 4651 } 4652 4653 /** 4654 * mpi3mr_pel_wait_complete - PELWait Completion callback 4655 * @mrioc: Adapter instance reference 4656 * @drv_cmd: Internal command tracker 4657 * 4658 * This is a callback handler for the PELWait request and 4659 * firmware completes a PELWait request when it is aborted or a 4660 * new PEL entry is available. This sends AEN to the application 4661 * and if the PELwait completion is not due to PELAbort then 4662 * this will send a request for new PEL Sequence number 4663 * 4664 * Return: Nothing. 4665 */ 4666 static void mpi3mr_pel_wait_complete(struct mpi3mr_ioc *mrioc, 4667 struct mpi3mr_drv_cmd *drv_cmd) 4668 { 4669 struct mpi3_pel_reply *pel_reply = NULL; 4670 u16 ioc_status, pe_log_status; 4671 bool do_retry = false; 4672 4673 if (drv_cmd->state & MPI3MR_CMD_RESET) 4674 goto cleanup_drv_cmd; 4675 4676 ioc_status = drv_cmd->ioc_status & MPI3_IOCSTATUS_STATUS_MASK; 4677 if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { 4678 ioc_err(mrioc, "%s: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", 4679 __func__, ioc_status, drv_cmd->ioc_loginfo); 4680 dprint_bsg_err(mrioc, 4681 "pel_wait: failed with ioc_status(0x%04x), log_info(0x%08x)\n", 4682 ioc_status, drv_cmd->ioc_loginfo); 4683 do_retry = true; 4684 } 4685 4686 if (drv_cmd->state & MPI3MR_CMD_REPLY_VALID) 4687 pel_reply = (struct mpi3_pel_reply *)drv_cmd->reply; 4688 4689 if (!pel_reply) { 4690 dprint_bsg_err(mrioc, 4691 "pel_wait: failed due to no reply\n"); 4692 goto out_failed; 4693 } 4694 4695 pe_log_status = le16_to_cpu(pel_reply->pe_log_status); 4696 if ((pe_log_status != MPI3_PEL_STATUS_SUCCESS) && 4697 (pe_log_status != MPI3_PEL_STATUS_ABORTED)) { 4698 ioc_err(mrioc, "%s: Failed pe_log_status(0x%04x)\n", 4699 __func__, pe_log_status); 4700 dprint_bsg_err(mrioc, 4701 "pel_wait: failed due to pel_log_status(0x%04x)\n", 4702 pe_log_status); 4703 do_retry = true; 4704 } 4705 4706 if (do_retry) { 4707 if (drv_cmd->retry_count < MPI3MR_PEL_RETRY_COUNT) { 4708 drv_cmd->retry_count++; 4709 dprint_bsg_err(mrioc, "pel_wait: retrying(%d)\n", 4710 drv_cmd->retry_count); 4711 mpi3mr_pel_wait_post(mrioc, drv_cmd); 4712 return; 4713 } 4714 dprint_bsg_err(mrioc, 4715 "pel_wait: failed after all retries(%d)\n", 4716 drv_cmd->retry_count); 4717 goto out_failed; 4718 } 4719 atomic64_inc(&event_counter); 4720 if (!mrioc->pel_abort_requested) { 4721 mrioc->pel_cmds.retry_count = 0; 4722 mpi3mr_pel_get_seqnum_post(mrioc, &mrioc->pel_cmds); 4723 } 4724 4725 return; 4726 out_failed: 4727 mrioc->pel_enabled = false; 4728 cleanup_drv_cmd: 4729 drv_cmd->state = MPI3MR_CMD_NOTUSED; 4730 drv_cmd->callback = NULL; 4731 drv_cmd->retry_count = 0; 4732 } 4733 4734 /** 4735 * mpi3mr_pel_get_seqnum_complete - PELGetSeqNum Completion callback 4736 * @mrioc: Adapter instance reference 4737 * @drv_cmd: Internal command tracker 4738 * 4739 * This is a callback handler for the PEL get sequence number 4740 * request and a new PEL wait request will be issued to the 4741 * firmware from this 4742 * 4743 * Return: Nothing. 4744 */ 4745 void mpi3mr_pel_get_seqnum_complete(struct mpi3mr_ioc *mrioc, 4746 struct mpi3mr_drv_cmd *drv_cmd) 4747 { 4748 struct mpi3_pel_reply *pel_reply = NULL; 4749 struct mpi3_pel_seq *pel_seqnum_virt; 4750 u16 ioc_status; 4751 bool do_retry = false; 4752 4753 pel_seqnum_virt = (struct mpi3_pel_seq *)mrioc->pel_seqnum_virt; 4754 4755 if (drv_cmd->state & MPI3MR_CMD_RESET) 4756 goto cleanup_drv_cmd; 4757 4758 ioc_status = drv_cmd->ioc_status & MPI3_IOCSTATUS_STATUS_MASK; 4759 if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { 4760 dprint_bsg_err(mrioc, 4761 "pel_get_seqnum: failed with ioc_status(0x%04x), log_info(0x%08x)\n", 4762 ioc_status, drv_cmd->ioc_loginfo); 4763 do_retry = true; 4764 } 4765 4766 if (drv_cmd->state & MPI3MR_CMD_REPLY_VALID) 4767 pel_reply = (struct mpi3_pel_reply *)drv_cmd->reply; 4768 if (!pel_reply) { 4769 dprint_bsg_err(mrioc, 4770 "pel_get_seqnum: failed due to no reply\n"); 4771 goto out_failed; 4772 } 4773 4774 if (le16_to_cpu(pel_reply->pe_log_status) != MPI3_PEL_STATUS_SUCCESS) { 4775 dprint_bsg_err(mrioc, 4776 "pel_get_seqnum: failed due to pel_log_status(0x%04x)\n", 4777 le16_to_cpu(pel_reply->pe_log_status)); 4778 do_retry = true; 4779 } 4780 4781 if (do_retry) { 4782 if (drv_cmd->retry_count < MPI3MR_PEL_RETRY_COUNT) { 4783 drv_cmd->retry_count++; 4784 dprint_bsg_err(mrioc, 4785 "pel_get_seqnum: retrying(%d)\n", 4786 drv_cmd->retry_count); 4787 mpi3mr_pel_get_seqnum_post(mrioc, drv_cmd); 4788 return; 4789 } 4790 4791 dprint_bsg_err(mrioc, 4792 "pel_get_seqnum: failed after all retries(%d)\n", 4793 drv_cmd->retry_count); 4794 goto out_failed; 4795 } 4796 mrioc->pel_newest_seqnum = le32_to_cpu(pel_seqnum_virt->newest) + 1; 4797 drv_cmd->retry_count = 0; 4798 mpi3mr_pel_wait_post(mrioc, drv_cmd); 4799 4800 return; 4801 out_failed: 4802 mrioc->pel_enabled = false; 4803 cleanup_drv_cmd: 4804 drv_cmd->state = MPI3MR_CMD_NOTUSED; 4805 drv_cmd->callback = NULL; 4806 drv_cmd->retry_count = 0; 4807 } 4808 4809 /** 4810 * mpi3mr_soft_reset_handler - Reset the controller 4811 * @mrioc: Adapter instance reference 4812 * @reset_reason: Reset reason code 4813 * @snapdump: Flag to generate snapdump in firmware or not 4814 * 4815 * This is an handler for recovering controller by issuing soft 4816 * reset are diag fault reset. This is a blocking function and 4817 * when one reset is executed if any other resets they will be 4818 * blocked. All BSG requests will be blocked during the reset. If 4819 * controller reset is successful then the controller will be 4820 * reinitalized, otherwise the controller will be marked as not 4821 * recoverable 4822 * 4823 * In snapdump bit is set, the controller is issued with diag 4824 * fault reset so that the firmware can create a snap dump and 4825 * post that the firmware will result in F000 fault and the 4826 * driver will issue soft reset to recover from that. 4827 * 4828 * Return: 0 on success, non-zero on failure. 4829 */ 4830 int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc, 4831 u32 reset_reason, u8 snapdump) 4832 { 4833 int retval = 0, i; 4834 unsigned long flags; 4835 u32 host_diagnostic, timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10; 4836 4837 /* Block the reset handler until diag save in progress*/ 4838 dprint_reset(mrioc, 4839 "soft_reset_handler: check and block on diagsave_timeout(%d)\n", 4840 mrioc->diagsave_timeout); 4841 while (mrioc->diagsave_timeout) 4842 ssleep(1); 4843 /* 4844 * Block new resets until the currently executing one is finished and 4845 * return the status of the existing reset for all blocked resets 4846 */ 4847 dprint_reset(mrioc, "soft_reset_handler: acquiring reset_mutex\n"); 4848 if (!mutex_trylock(&mrioc->reset_mutex)) { 4849 ioc_info(mrioc, 4850 "controller reset triggered by %s is blocked due to another reset in progress\n", 4851 mpi3mr_reset_rc_name(reset_reason)); 4852 do { 4853 ssleep(1); 4854 } while (mrioc->reset_in_progress == 1); 4855 ioc_info(mrioc, 4856 "returning previous reset result(%d) for the reset triggered by %s\n", 4857 mrioc->prev_reset_result, 4858 mpi3mr_reset_rc_name(reset_reason)); 4859 return mrioc->prev_reset_result; 4860 } 4861 ioc_info(mrioc, "controller reset is triggered by %s\n", 4862 mpi3mr_reset_rc_name(reset_reason)); 4863 4864 mrioc->device_refresh_on = 0; 4865 mrioc->reset_in_progress = 1; 4866 mrioc->stop_bsgs = 1; 4867 mrioc->prev_reset_result = -1; 4868 4869 if ((!snapdump) && (reset_reason != MPI3MR_RESET_FROM_FAULT_WATCH) && 4870 (reset_reason != MPI3MR_RESET_FROM_FIRMWARE) && 4871 (reset_reason != MPI3MR_RESET_FROM_CIACTIV_FAULT)) { 4872 for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) 4873 mrioc->event_masks[i] = -1; 4874 4875 dprint_reset(mrioc, "soft_reset_handler: masking events\n"); 4876 mpi3mr_issue_event_notification(mrioc); 4877 } 4878 4879 mpi3mr_wait_for_host_io(mrioc, MPI3MR_RESET_HOST_IOWAIT_TIMEOUT); 4880 4881 mpi3mr_ioc_disable_intr(mrioc); 4882 4883 if (snapdump) { 4884 mpi3mr_set_diagsave(mrioc); 4885 retval = mpi3mr_issue_reset(mrioc, 4886 MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason); 4887 if (!retval) { 4888 do { 4889 host_diagnostic = 4890 readl(&mrioc->sysif_regs->host_diagnostic); 4891 if (!(host_diagnostic & 4892 MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS)) 4893 break; 4894 msleep(100); 4895 } while (--timeout); 4896 } 4897 } 4898 4899 retval = mpi3mr_issue_reset(mrioc, 4900 MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, reset_reason); 4901 if (retval) { 4902 ioc_err(mrioc, "Failed to issue soft reset to the ioc\n"); 4903 goto out; 4904 } 4905 if (mrioc->num_io_throttle_group != 4906 mrioc->facts.max_io_throttle_group) { 4907 ioc_err(mrioc, 4908 "max io throttle group doesn't match old(%d), new(%d)\n", 4909 mrioc->num_io_throttle_group, 4910 mrioc->facts.max_io_throttle_group); 4911 retval = -EPERM; 4912 goto out; 4913 } 4914 4915 mpi3mr_flush_delayed_cmd_lists(mrioc); 4916 mpi3mr_flush_drv_cmds(mrioc); 4917 bitmap_clear(mrioc->devrem_bitmap, 0, MPI3MR_NUM_DEVRMCMD); 4918 bitmap_clear(mrioc->removepend_bitmap, 0, 4919 mrioc->dev_handle_bitmap_bits); 4920 bitmap_clear(mrioc->evtack_cmds_bitmap, 0, MPI3MR_NUM_EVTACKCMD); 4921 mpi3mr_flush_host_io(mrioc); 4922 mpi3mr_cleanup_fwevt_list(mrioc); 4923 mpi3mr_invalidate_devhandles(mrioc); 4924 mpi3mr_free_enclosure_list(mrioc); 4925 4926 if (mrioc->prepare_for_reset) { 4927 mrioc->prepare_for_reset = 0; 4928 mrioc->prepare_for_reset_timeout_counter = 0; 4929 } 4930 mpi3mr_memset_buffers(mrioc); 4931 retval = mpi3mr_reinit_ioc(mrioc, 0); 4932 if (retval) { 4933 pr_err(IOCNAME "reinit after soft reset failed: reason %d\n", 4934 mrioc->name, reset_reason); 4935 goto out; 4936 } 4937 ssleep(MPI3MR_RESET_TOPOLOGY_SETTLE_TIME); 4938 4939 out: 4940 if (!retval) { 4941 mrioc->diagsave_timeout = 0; 4942 mrioc->reset_in_progress = 0; 4943 mrioc->pel_abort_requested = 0; 4944 if (mrioc->pel_enabled) { 4945 mrioc->pel_cmds.retry_count = 0; 4946 mpi3mr_pel_wait_post(mrioc, &mrioc->pel_cmds); 4947 } 4948 4949 mrioc->device_refresh_on = 0; 4950 4951 mrioc->ts_update_counter = 0; 4952 spin_lock_irqsave(&mrioc->watchdog_lock, flags); 4953 if (mrioc->watchdog_work_q) 4954 queue_delayed_work(mrioc->watchdog_work_q, 4955 &mrioc->watchdog_work, 4956 msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL)); 4957 spin_unlock_irqrestore(&mrioc->watchdog_lock, flags); 4958 mrioc->stop_bsgs = 0; 4959 if (mrioc->pel_enabled) 4960 atomic64_inc(&event_counter); 4961 } else { 4962 mpi3mr_issue_reset(mrioc, 4963 MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason); 4964 mrioc->device_refresh_on = 0; 4965 mrioc->unrecoverable = 1; 4966 mrioc->reset_in_progress = 0; 4967 retval = -1; 4968 mpi3mr_flush_cmds_for_unrecovered_controller(mrioc); 4969 } 4970 mrioc->prev_reset_result = retval; 4971 mutex_unlock(&mrioc->reset_mutex); 4972 ioc_info(mrioc, "controller reset is %s\n", 4973 ((retval == 0) ? "successful" : "failed")); 4974 return retval; 4975 } 4976 4977 4978 /** 4979 * mpi3mr_free_config_dma_memory - free memory for config page 4980 * @mrioc: Adapter instance reference 4981 * @mem_desc: memory descriptor structure 4982 * 4983 * Check whether the size of the buffer specified by the memory 4984 * descriptor is greater than the default page size if so then 4985 * free the memory pointed by the descriptor. 4986 * 4987 * Return: Nothing. 4988 */ 4989 static void mpi3mr_free_config_dma_memory(struct mpi3mr_ioc *mrioc, 4990 struct dma_memory_desc *mem_desc) 4991 { 4992 if ((mem_desc->size > mrioc->cfg_page_sz) && mem_desc->addr) { 4993 dma_free_coherent(&mrioc->pdev->dev, mem_desc->size, 4994 mem_desc->addr, mem_desc->dma_addr); 4995 mem_desc->addr = NULL; 4996 } 4997 } 4998 4999 /** 5000 * mpi3mr_alloc_config_dma_memory - Alloc memory for config page 5001 * @mrioc: Adapter instance reference 5002 * @mem_desc: Memory descriptor to hold dma memory info 5003 * 5004 * This function allocates new dmaable memory or provides the 5005 * default config page dmaable memory based on the memory size 5006 * described by the descriptor. 5007 * 5008 * Return: 0 on success, non-zero on failure. 5009 */ 5010 static int mpi3mr_alloc_config_dma_memory(struct mpi3mr_ioc *mrioc, 5011 struct dma_memory_desc *mem_desc) 5012 { 5013 if (mem_desc->size > mrioc->cfg_page_sz) { 5014 mem_desc->addr = dma_alloc_coherent(&mrioc->pdev->dev, 5015 mem_desc->size, &mem_desc->dma_addr, GFP_KERNEL); 5016 if (!mem_desc->addr) 5017 return -ENOMEM; 5018 } else { 5019 mem_desc->addr = mrioc->cfg_page; 5020 mem_desc->dma_addr = mrioc->cfg_page_dma; 5021 memset(mem_desc->addr, 0, mrioc->cfg_page_sz); 5022 } 5023 return 0; 5024 } 5025 5026 /** 5027 * mpi3mr_post_cfg_req - Issue config requests and wait 5028 * @mrioc: Adapter instance reference 5029 * @cfg_req: Configuration request 5030 * @timeout: Timeout in seconds 5031 * @ioc_status: Pointer to return ioc status 5032 * 5033 * A generic function for posting MPI3 configuration request to 5034 * the firmware. This blocks for the completion of request for 5035 * timeout seconds and if the request times out this function 5036 * faults the controller with proper reason code. 5037 * 5038 * On successful completion of the request this function returns 5039 * appropriate ioc status from the firmware back to the caller. 5040 * 5041 * Return: 0 on success, non-zero on failure. 5042 */ 5043 static int mpi3mr_post_cfg_req(struct mpi3mr_ioc *mrioc, 5044 struct mpi3_config_request *cfg_req, int timeout, u16 *ioc_status) 5045 { 5046 int retval = 0; 5047 5048 mutex_lock(&mrioc->cfg_cmds.mutex); 5049 if (mrioc->cfg_cmds.state & MPI3MR_CMD_PENDING) { 5050 retval = -1; 5051 ioc_err(mrioc, "sending config request failed due to command in use\n"); 5052 mutex_unlock(&mrioc->cfg_cmds.mutex); 5053 goto out; 5054 } 5055 mrioc->cfg_cmds.state = MPI3MR_CMD_PENDING; 5056 mrioc->cfg_cmds.is_waiting = 1; 5057 mrioc->cfg_cmds.callback = NULL; 5058 mrioc->cfg_cmds.ioc_status = 0; 5059 mrioc->cfg_cmds.ioc_loginfo = 0; 5060 5061 cfg_req->host_tag = cpu_to_le16(MPI3MR_HOSTTAG_CFG_CMDS); 5062 cfg_req->function = MPI3_FUNCTION_CONFIG; 5063 5064 init_completion(&mrioc->cfg_cmds.done); 5065 dprint_cfg_info(mrioc, "posting config request\n"); 5066 if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) 5067 dprint_dump(cfg_req, sizeof(struct mpi3_config_request), 5068 "mpi3_cfg_req"); 5069 retval = mpi3mr_admin_request_post(mrioc, cfg_req, sizeof(*cfg_req), 1); 5070 if (retval) { 5071 ioc_err(mrioc, "posting config request failed\n"); 5072 goto out_unlock; 5073 } 5074 wait_for_completion_timeout(&mrioc->cfg_cmds.done, (timeout * HZ)); 5075 if (!(mrioc->cfg_cmds.state & MPI3MR_CMD_COMPLETE)) { 5076 mpi3mr_check_rh_fault_ioc(mrioc, 5077 MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT); 5078 ioc_err(mrioc, "config request timed out\n"); 5079 retval = -1; 5080 goto out_unlock; 5081 } 5082 *ioc_status = mrioc->cfg_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK; 5083 if ((*ioc_status) != MPI3_IOCSTATUS_SUCCESS) 5084 dprint_cfg_err(mrioc, 5085 "cfg_page request returned with ioc_status(0x%04x), log_info(0x%08x)\n", 5086 *ioc_status, mrioc->cfg_cmds.ioc_loginfo); 5087 5088 out_unlock: 5089 mrioc->cfg_cmds.state = MPI3MR_CMD_NOTUSED; 5090 mutex_unlock(&mrioc->cfg_cmds.mutex); 5091 5092 out: 5093 return retval; 5094 } 5095 5096 /** 5097 * mpi3mr_process_cfg_req - config page request processor 5098 * @mrioc: Adapter instance reference 5099 * @cfg_req: Configuration request 5100 * @cfg_hdr: Configuration page header 5101 * @timeout: Timeout in seconds 5102 * @ioc_status: Pointer to return ioc status 5103 * @cfg_buf: Memory pointer to copy config page or header 5104 * @cfg_buf_sz: Size of the memory to get config page or header 5105 * 5106 * This is handler for config page read, write and config page 5107 * header read operations. 5108 * 5109 * This function expects the cfg_req to be populated with page 5110 * type, page number, action for the header read and with page 5111 * address for all other operations. 5112 * 5113 * The cfg_hdr can be passed as null for reading required header 5114 * details for read/write pages the cfg_hdr should point valid 5115 * configuration page header. 5116 * 5117 * This allocates dmaable memory based on the size of the config 5118 * buffer and set the SGE of the cfg_req. 5119 * 5120 * For write actions, the config page data has to be passed in 5121 * the cfg_buf and size of the data has to be mentioned in the 5122 * cfg_buf_sz. 5123 * 5124 * For read/header actions, on successful completion of the 5125 * request with successful ioc_status the data will be copied 5126 * into the cfg_buf limited to a minimum of actual page size and 5127 * cfg_buf_sz 5128 * 5129 * 5130 * Return: 0 on success, non-zero on failure. 5131 */ 5132 static int mpi3mr_process_cfg_req(struct mpi3mr_ioc *mrioc, 5133 struct mpi3_config_request *cfg_req, 5134 struct mpi3_config_page_header *cfg_hdr, int timeout, u16 *ioc_status, 5135 void *cfg_buf, u32 cfg_buf_sz) 5136 { 5137 struct dma_memory_desc mem_desc; 5138 int retval = -1; 5139 u8 invalid_action = 0; 5140 u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; 5141 5142 memset(&mem_desc, 0, sizeof(struct dma_memory_desc)); 5143 5144 if (cfg_req->action == MPI3_CONFIG_ACTION_PAGE_HEADER) 5145 mem_desc.size = sizeof(struct mpi3_config_page_header); 5146 else { 5147 if (!cfg_hdr) { 5148 ioc_err(mrioc, "null config header passed for config action(%d), page_type(0x%02x), page_num(%d)\n", 5149 cfg_req->action, cfg_req->page_type, 5150 cfg_req->page_number); 5151 goto out; 5152 } 5153 switch (cfg_hdr->page_attribute & MPI3_CONFIG_PAGEATTR_MASK) { 5154 case MPI3_CONFIG_PAGEATTR_READ_ONLY: 5155 if (cfg_req->action 5156 != MPI3_CONFIG_ACTION_READ_CURRENT) 5157 invalid_action = 1; 5158 break; 5159 case MPI3_CONFIG_PAGEATTR_CHANGEABLE: 5160 if ((cfg_req->action == 5161 MPI3_CONFIG_ACTION_READ_PERSISTENT) || 5162 (cfg_req->action == 5163 MPI3_CONFIG_ACTION_WRITE_PERSISTENT)) 5164 invalid_action = 1; 5165 break; 5166 case MPI3_CONFIG_PAGEATTR_PERSISTENT: 5167 default: 5168 break; 5169 } 5170 if (invalid_action) { 5171 ioc_err(mrioc, 5172 "config action(%d) is not allowed for page_type(0x%02x), page_num(%d) with page_attribute(0x%02x)\n", 5173 cfg_req->action, cfg_req->page_type, 5174 cfg_req->page_number, cfg_hdr->page_attribute); 5175 goto out; 5176 } 5177 mem_desc.size = le16_to_cpu(cfg_hdr->page_length) * 4; 5178 cfg_req->page_length = cfg_hdr->page_length; 5179 cfg_req->page_version = cfg_hdr->page_version; 5180 } 5181 if (mpi3mr_alloc_config_dma_memory(mrioc, &mem_desc)) 5182 goto out; 5183 5184 mpi3mr_add_sg_single(&cfg_req->sgl, sgl_flags, mem_desc.size, 5185 mem_desc.dma_addr); 5186 5187 if ((cfg_req->action == MPI3_CONFIG_ACTION_WRITE_PERSISTENT) || 5188 (cfg_req->action == MPI3_CONFIG_ACTION_WRITE_CURRENT)) { 5189 memcpy(mem_desc.addr, cfg_buf, min_t(u16, mem_desc.size, 5190 cfg_buf_sz)); 5191 dprint_cfg_info(mrioc, "config buffer to be written\n"); 5192 if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) 5193 dprint_dump(mem_desc.addr, mem_desc.size, "cfg_buf"); 5194 } 5195 5196 if (mpi3mr_post_cfg_req(mrioc, cfg_req, timeout, ioc_status)) 5197 goto out; 5198 5199 retval = 0; 5200 if ((*ioc_status == MPI3_IOCSTATUS_SUCCESS) && 5201 (cfg_req->action != MPI3_CONFIG_ACTION_WRITE_PERSISTENT) && 5202 (cfg_req->action != MPI3_CONFIG_ACTION_WRITE_CURRENT)) { 5203 memcpy(cfg_buf, mem_desc.addr, min_t(u16, mem_desc.size, 5204 cfg_buf_sz)); 5205 dprint_cfg_info(mrioc, "config buffer read\n"); 5206 if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) 5207 dprint_dump(mem_desc.addr, mem_desc.size, "cfg_buf"); 5208 } 5209 5210 out: 5211 mpi3mr_free_config_dma_memory(mrioc, &mem_desc); 5212 return retval; 5213 } 5214 5215 /** 5216 * mpi3mr_cfg_get_dev_pg0 - Read current device page0 5217 * @mrioc: Adapter instance reference 5218 * @ioc_status: Pointer to return ioc status 5219 * @dev_pg0: Pointer to return device page 0 5220 * @pg_sz: Size of the memory allocated to the page pointer 5221 * @form: The form to be used for addressing the page 5222 * @form_spec: Form specific information like device handle 5223 * 5224 * This is handler for config page read for a specific device 5225 * page0. The ioc_status has the controller returned ioc_status. 5226 * This routine doesn't check ioc_status to decide whether the 5227 * page read is success or not and it is the callers 5228 * responsibility. 5229 * 5230 * Return: 0 on success, non-zero on failure. 5231 */ 5232 int mpi3mr_cfg_get_dev_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 5233 struct mpi3_device_page0 *dev_pg0, u16 pg_sz, u32 form, u32 form_spec) 5234 { 5235 struct mpi3_config_page_header cfg_hdr; 5236 struct mpi3_config_request cfg_req; 5237 u32 page_address; 5238 5239 memset(dev_pg0, 0, pg_sz); 5240 memset(&cfg_hdr, 0, sizeof(cfg_hdr)); 5241 memset(&cfg_req, 0, sizeof(cfg_req)); 5242 5243 cfg_req.function = MPI3_FUNCTION_CONFIG; 5244 cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; 5245 cfg_req.page_type = MPI3_CONFIG_PAGETYPE_DEVICE; 5246 cfg_req.page_number = 0; 5247 cfg_req.page_address = 0; 5248 5249 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, 5250 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { 5251 ioc_err(mrioc, "device page0 header read failed\n"); 5252 goto out_failed; 5253 } 5254 if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5255 ioc_err(mrioc, "device page0 header read failed with ioc_status(0x%04x)\n", 5256 *ioc_status); 5257 goto out_failed; 5258 } 5259 cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; 5260 page_address = ((form & MPI3_DEVICE_PGAD_FORM_MASK) | 5261 (form_spec & MPI3_DEVICE_PGAD_HANDLE_MASK)); 5262 cfg_req.page_address = cpu_to_le32(page_address); 5263 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, 5264 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, dev_pg0, pg_sz)) { 5265 ioc_err(mrioc, "device page0 read failed\n"); 5266 goto out_failed; 5267 } 5268 return 0; 5269 out_failed: 5270 return -1; 5271 } 5272 5273 5274 /** 5275 * mpi3mr_cfg_get_sas_phy_pg0 - Read current SAS Phy page0 5276 * @mrioc: Adapter instance reference 5277 * @ioc_status: Pointer to return ioc status 5278 * @phy_pg0: Pointer to return SAS Phy page 0 5279 * @pg_sz: Size of the memory allocated to the page pointer 5280 * @form: The form to be used for addressing the page 5281 * @form_spec: Form specific information like phy number 5282 * 5283 * This is handler for config page read for a specific SAS Phy 5284 * page0. The ioc_status has the controller returned ioc_status. 5285 * This routine doesn't check ioc_status to decide whether the 5286 * page read is success or not and it is the callers 5287 * responsibility. 5288 * 5289 * Return: 0 on success, non-zero on failure. 5290 */ 5291 int mpi3mr_cfg_get_sas_phy_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 5292 struct mpi3_sas_phy_page0 *phy_pg0, u16 pg_sz, u32 form, 5293 u32 form_spec) 5294 { 5295 struct mpi3_config_page_header cfg_hdr; 5296 struct mpi3_config_request cfg_req; 5297 u32 page_address; 5298 5299 memset(phy_pg0, 0, pg_sz); 5300 memset(&cfg_hdr, 0, sizeof(cfg_hdr)); 5301 memset(&cfg_req, 0, sizeof(cfg_req)); 5302 5303 cfg_req.function = MPI3_FUNCTION_CONFIG; 5304 cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; 5305 cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_PHY; 5306 cfg_req.page_number = 0; 5307 cfg_req.page_address = 0; 5308 5309 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, 5310 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { 5311 ioc_err(mrioc, "sas phy page0 header read failed\n"); 5312 goto out_failed; 5313 } 5314 if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5315 ioc_err(mrioc, "sas phy page0 header read failed with ioc_status(0x%04x)\n", 5316 *ioc_status); 5317 goto out_failed; 5318 } 5319 cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; 5320 page_address = ((form & MPI3_SAS_PHY_PGAD_FORM_MASK) | 5321 (form_spec & MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK)); 5322 cfg_req.page_address = cpu_to_le32(page_address); 5323 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, 5324 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, phy_pg0, pg_sz)) { 5325 ioc_err(mrioc, "sas phy page0 read failed\n"); 5326 goto out_failed; 5327 } 5328 return 0; 5329 out_failed: 5330 return -1; 5331 } 5332 5333 /** 5334 * mpi3mr_cfg_get_sas_phy_pg1 - Read current SAS Phy page1 5335 * @mrioc: Adapter instance reference 5336 * @ioc_status: Pointer to return ioc status 5337 * @phy_pg1: Pointer to return SAS Phy page 1 5338 * @pg_sz: Size of the memory allocated to the page pointer 5339 * @form: The form to be used for addressing the page 5340 * @form_spec: Form specific information like phy number 5341 * 5342 * This is handler for config page read for a specific SAS Phy 5343 * page1. The ioc_status has the controller returned ioc_status. 5344 * This routine doesn't check ioc_status to decide whether the 5345 * page read is success or not and it is the callers 5346 * responsibility. 5347 * 5348 * Return: 0 on success, non-zero on failure. 5349 */ 5350 int mpi3mr_cfg_get_sas_phy_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 5351 struct mpi3_sas_phy_page1 *phy_pg1, u16 pg_sz, u32 form, 5352 u32 form_spec) 5353 { 5354 struct mpi3_config_page_header cfg_hdr; 5355 struct mpi3_config_request cfg_req; 5356 u32 page_address; 5357 5358 memset(phy_pg1, 0, pg_sz); 5359 memset(&cfg_hdr, 0, sizeof(cfg_hdr)); 5360 memset(&cfg_req, 0, sizeof(cfg_req)); 5361 5362 cfg_req.function = MPI3_FUNCTION_CONFIG; 5363 cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; 5364 cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_PHY; 5365 cfg_req.page_number = 1; 5366 cfg_req.page_address = 0; 5367 5368 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, 5369 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { 5370 ioc_err(mrioc, "sas phy page1 header read failed\n"); 5371 goto out_failed; 5372 } 5373 if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5374 ioc_err(mrioc, "sas phy page1 header read failed with ioc_status(0x%04x)\n", 5375 *ioc_status); 5376 goto out_failed; 5377 } 5378 cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; 5379 page_address = ((form & MPI3_SAS_PHY_PGAD_FORM_MASK) | 5380 (form_spec & MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK)); 5381 cfg_req.page_address = cpu_to_le32(page_address); 5382 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, 5383 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, phy_pg1, pg_sz)) { 5384 ioc_err(mrioc, "sas phy page1 read failed\n"); 5385 goto out_failed; 5386 } 5387 return 0; 5388 out_failed: 5389 return -1; 5390 } 5391 5392 5393 /** 5394 * mpi3mr_cfg_get_sas_exp_pg0 - Read current SAS Expander page0 5395 * @mrioc: Adapter instance reference 5396 * @ioc_status: Pointer to return ioc status 5397 * @exp_pg0: Pointer to return SAS Expander page 0 5398 * @pg_sz: Size of the memory allocated to the page pointer 5399 * @form: The form to be used for addressing the page 5400 * @form_spec: Form specific information like device handle 5401 * 5402 * This is handler for config page read for a specific SAS 5403 * Expander page0. The ioc_status has the controller returned 5404 * ioc_status. This routine doesn't check ioc_status to decide 5405 * whether the page read is success or not and it is the callers 5406 * responsibility. 5407 * 5408 * Return: 0 on success, non-zero on failure. 5409 */ 5410 int mpi3mr_cfg_get_sas_exp_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 5411 struct mpi3_sas_expander_page0 *exp_pg0, u16 pg_sz, u32 form, 5412 u32 form_spec) 5413 { 5414 struct mpi3_config_page_header cfg_hdr; 5415 struct mpi3_config_request cfg_req; 5416 u32 page_address; 5417 5418 memset(exp_pg0, 0, pg_sz); 5419 memset(&cfg_hdr, 0, sizeof(cfg_hdr)); 5420 memset(&cfg_req, 0, sizeof(cfg_req)); 5421 5422 cfg_req.function = MPI3_FUNCTION_CONFIG; 5423 cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; 5424 cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_EXPANDER; 5425 cfg_req.page_number = 0; 5426 cfg_req.page_address = 0; 5427 5428 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, 5429 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { 5430 ioc_err(mrioc, "expander page0 header read failed\n"); 5431 goto out_failed; 5432 } 5433 if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5434 ioc_err(mrioc, "expander page0 header read failed with ioc_status(0x%04x)\n", 5435 *ioc_status); 5436 goto out_failed; 5437 } 5438 cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; 5439 page_address = ((form & MPI3_SAS_EXPAND_PGAD_FORM_MASK) | 5440 (form_spec & (MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK | 5441 MPI3_SAS_EXPAND_PGAD_HANDLE_MASK))); 5442 cfg_req.page_address = cpu_to_le32(page_address); 5443 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, 5444 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, exp_pg0, pg_sz)) { 5445 ioc_err(mrioc, "expander page0 read failed\n"); 5446 goto out_failed; 5447 } 5448 return 0; 5449 out_failed: 5450 return -1; 5451 } 5452 5453 /** 5454 * mpi3mr_cfg_get_sas_exp_pg1 - Read current SAS Expander page1 5455 * @mrioc: Adapter instance reference 5456 * @ioc_status: Pointer to return ioc status 5457 * @exp_pg1: Pointer to return SAS Expander page 1 5458 * @pg_sz: Size of the memory allocated to the page pointer 5459 * @form: The form to be used for addressing the page 5460 * @form_spec: Form specific information like phy number 5461 * 5462 * This is handler for config page read for a specific SAS 5463 * Expander page1. The ioc_status has the controller returned 5464 * ioc_status. This routine doesn't check ioc_status to decide 5465 * whether the page read is success or not and it is the callers 5466 * responsibility. 5467 * 5468 * Return: 0 on success, non-zero on failure. 5469 */ 5470 int mpi3mr_cfg_get_sas_exp_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 5471 struct mpi3_sas_expander_page1 *exp_pg1, u16 pg_sz, u32 form, 5472 u32 form_spec) 5473 { 5474 struct mpi3_config_page_header cfg_hdr; 5475 struct mpi3_config_request cfg_req; 5476 u32 page_address; 5477 5478 memset(exp_pg1, 0, pg_sz); 5479 memset(&cfg_hdr, 0, sizeof(cfg_hdr)); 5480 memset(&cfg_req, 0, sizeof(cfg_req)); 5481 5482 cfg_req.function = MPI3_FUNCTION_CONFIG; 5483 cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; 5484 cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_EXPANDER; 5485 cfg_req.page_number = 1; 5486 cfg_req.page_address = 0; 5487 5488 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, 5489 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { 5490 ioc_err(mrioc, "expander page1 header read failed\n"); 5491 goto out_failed; 5492 } 5493 if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5494 ioc_err(mrioc, "expander page1 header read failed with ioc_status(0x%04x)\n", 5495 *ioc_status); 5496 goto out_failed; 5497 } 5498 cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; 5499 page_address = ((form & MPI3_SAS_EXPAND_PGAD_FORM_MASK) | 5500 (form_spec & (MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK | 5501 MPI3_SAS_EXPAND_PGAD_HANDLE_MASK))); 5502 cfg_req.page_address = cpu_to_le32(page_address); 5503 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, 5504 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, exp_pg1, pg_sz)) { 5505 ioc_err(mrioc, "expander page1 read failed\n"); 5506 goto out_failed; 5507 } 5508 return 0; 5509 out_failed: 5510 return -1; 5511 } 5512 5513 /** 5514 * mpi3mr_cfg_get_enclosure_pg0 - Read current Enclosure page0 5515 * @mrioc: Adapter instance reference 5516 * @ioc_status: Pointer to return ioc status 5517 * @encl_pg0: Pointer to return Enclosure page 0 5518 * @pg_sz: Size of the memory allocated to the page pointer 5519 * @form: The form to be used for addressing the page 5520 * @form_spec: Form specific information like device handle 5521 * 5522 * This is handler for config page read for a specific Enclosure 5523 * page0. The ioc_status has the controller returned ioc_status. 5524 * This routine doesn't check ioc_status to decide whether the 5525 * page read is success or not and it is the callers 5526 * responsibility. 5527 * 5528 * Return: 0 on success, non-zero on failure. 5529 */ 5530 int mpi3mr_cfg_get_enclosure_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 5531 struct mpi3_enclosure_page0 *encl_pg0, u16 pg_sz, u32 form, 5532 u32 form_spec) 5533 { 5534 struct mpi3_config_page_header cfg_hdr; 5535 struct mpi3_config_request cfg_req; 5536 u32 page_address; 5537 5538 memset(encl_pg0, 0, pg_sz); 5539 memset(&cfg_hdr, 0, sizeof(cfg_hdr)); 5540 memset(&cfg_req, 0, sizeof(cfg_req)); 5541 5542 cfg_req.function = MPI3_FUNCTION_CONFIG; 5543 cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; 5544 cfg_req.page_type = MPI3_CONFIG_PAGETYPE_ENCLOSURE; 5545 cfg_req.page_number = 0; 5546 cfg_req.page_address = 0; 5547 5548 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, 5549 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { 5550 ioc_err(mrioc, "enclosure page0 header read failed\n"); 5551 goto out_failed; 5552 } 5553 if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5554 ioc_err(mrioc, "enclosure page0 header read failed with ioc_status(0x%04x)\n", 5555 *ioc_status); 5556 goto out_failed; 5557 } 5558 cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; 5559 page_address = ((form & MPI3_ENCLOS_PGAD_FORM_MASK) | 5560 (form_spec & MPI3_ENCLOS_PGAD_HANDLE_MASK)); 5561 cfg_req.page_address = cpu_to_le32(page_address); 5562 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, 5563 MPI3MR_INTADMCMD_TIMEOUT, ioc_status, encl_pg0, pg_sz)) { 5564 ioc_err(mrioc, "enclosure page0 read failed\n"); 5565 goto out_failed; 5566 } 5567 return 0; 5568 out_failed: 5569 return -1; 5570 } 5571 5572 5573 /** 5574 * mpi3mr_cfg_get_sas_io_unit_pg0 - Read current SASIOUnit page0 5575 * @mrioc: Adapter instance reference 5576 * @sas_io_unit_pg0: Pointer to return SAS IO Unit page 0 5577 * @pg_sz: Size of the memory allocated to the page pointer 5578 * 5579 * This is handler for config page read for the SAS IO Unit 5580 * page0. This routine checks ioc_status to decide whether the 5581 * page read is success or not. 5582 * 5583 * Return: 0 on success, non-zero on failure. 5584 */ 5585 int mpi3mr_cfg_get_sas_io_unit_pg0(struct mpi3mr_ioc *mrioc, 5586 struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0, u16 pg_sz) 5587 { 5588 struct mpi3_config_page_header cfg_hdr; 5589 struct mpi3_config_request cfg_req; 5590 u16 ioc_status = 0; 5591 5592 memset(sas_io_unit_pg0, 0, pg_sz); 5593 memset(&cfg_hdr, 0, sizeof(cfg_hdr)); 5594 memset(&cfg_req, 0, sizeof(cfg_req)); 5595 5596 cfg_req.function = MPI3_FUNCTION_CONFIG; 5597 cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; 5598 cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT; 5599 cfg_req.page_number = 0; 5600 cfg_req.page_address = 0; 5601 5602 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, 5603 MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { 5604 ioc_err(mrioc, "sas io unit page0 header read failed\n"); 5605 goto out_failed; 5606 } 5607 if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5608 ioc_err(mrioc, "sas io unit page0 header read failed with ioc_status(0x%04x)\n", 5609 ioc_status); 5610 goto out_failed; 5611 } 5612 cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; 5613 5614 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, 5615 MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg0, pg_sz)) { 5616 ioc_err(mrioc, "sas io unit page0 read failed\n"); 5617 goto out_failed; 5618 } 5619 if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5620 ioc_err(mrioc, "sas io unit page0 read failed with ioc_status(0x%04x)\n", 5621 ioc_status); 5622 goto out_failed; 5623 } 5624 return 0; 5625 out_failed: 5626 return -1; 5627 } 5628 5629 /** 5630 * mpi3mr_cfg_get_sas_io_unit_pg1 - Read current SASIOUnit page1 5631 * @mrioc: Adapter instance reference 5632 * @sas_io_unit_pg1: Pointer to return SAS IO Unit page 1 5633 * @pg_sz: Size of the memory allocated to the page pointer 5634 * 5635 * This is handler for config page read for the SAS IO Unit 5636 * page1. This routine checks ioc_status to decide whether the 5637 * page read is success or not. 5638 * 5639 * Return: 0 on success, non-zero on failure. 5640 */ 5641 int mpi3mr_cfg_get_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc, 5642 struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz) 5643 { 5644 struct mpi3_config_page_header cfg_hdr; 5645 struct mpi3_config_request cfg_req; 5646 u16 ioc_status = 0; 5647 5648 memset(sas_io_unit_pg1, 0, pg_sz); 5649 memset(&cfg_hdr, 0, sizeof(cfg_hdr)); 5650 memset(&cfg_req, 0, sizeof(cfg_req)); 5651 5652 cfg_req.function = MPI3_FUNCTION_CONFIG; 5653 cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; 5654 cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT; 5655 cfg_req.page_number = 1; 5656 cfg_req.page_address = 0; 5657 5658 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, 5659 MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { 5660 ioc_err(mrioc, "sas io unit page1 header read failed\n"); 5661 goto out_failed; 5662 } 5663 if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5664 ioc_err(mrioc, "sas io unit page1 header read failed with ioc_status(0x%04x)\n", 5665 ioc_status); 5666 goto out_failed; 5667 } 5668 cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; 5669 5670 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, 5671 MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg1, pg_sz)) { 5672 ioc_err(mrioc, "sas io unit page1 read failed\n"); 5673 goto out_failed; 5674 } 5675 if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5676 ioc_err(mrioc, "sas io unit page1 read failed with ioc_status(0x%04x)\n", 5677 ioc_status); 5678 goto out_failed; 5679 } 5680 return 0; 5681 out_failed: 5682 return -1; 5683 } 5684 5685 /** 5686 * mpi3mr_cfg_set_sas_io_unit_pg1 - Write SASIOUnit page1 5687 * @mrioc: Adapter instance reference 5688 * @sas_io_unit_pg1: Pointer to the SAS IO Unit page 1 to write 5689 * @pg_sz: Size of the memory allocated to the page pointer 5690 * 5691 * This is handler for config page write for the SAS IO Unit 5692 * page1. This routine checks ioc_status to decide whether the 5693 * page read is success or not. This will modify both current 5694 * and persistent page. 5695 * 5696 * Return: 0 on success, non-zero on failure. 5697 */ 5698 int mpi3mr_cfg_set_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc, 5699 struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz) 5700 { 5701 struct mpi3_config_page_header cfg_hdr; 5702 struct mpi3_config_request cfg_req; 5703 u16 ioc_status = 0; 5704 5705 memset(&cfg_hdr, 0, sizeof(cfg_hdr)); 5706 memset(&cfg_req, 0, sizeof(cfg_req)); 5707 5708 cfg_req.function = MPI3_FUNCTION_CONFIG; 5709 cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; 5710 cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT; 5711 cfg_req.page_number = 1; 5712 cfg_req.page_address = 0; 5713 5714 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, 5715 MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { 5716 ioc_err(mrioc, "sas io unit page1 header read failed\n"); 5717 goto out_failed; 5718 } 5719 if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5720 ioc_err(mrioc, "sas io unit page1 header read failed with ioc_status(0x%04x)\n", 5721 ioc_status); 5722 goto out_failed; 5723 } 5724 cfg_req.action = MPI3_CONFIG_ACTION_WRITE_CURRENT; 5725 5726 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, 5727 MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg1, pg_sz)) { 5728 ioc_err(mrioc, "sas io unit page1 write current failed\n"); 5729 goto out_failed; 5730 } 5731 if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5732 ioc_err(mrioc, "sas io unit page1 write current failed with ioc_status(0x%04x)\n", 5733 ioc_status); 5734 goto out_failed; 5735 } 5736 5737 cfg_req.action = MPI3_CONFIG_ACTION_WRITE_PERSISTENT; 5738 5739 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, 5740 MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg1, pg_sz)) { 5741 ioc_err(mrioc, "sas io unit page1 write persistent failed\n"); 5742 goto out_failed; 5743 } 5744 if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5745 ioc_err(mrioc, "sas io unit page1 write persistent failed with ioc_status(0x%04x)\n", 5746 ioc_status); 5747 goto out_failed; 5748 } 5749 return 0; 5750 out_failed: 5751 return -1; 5752 } 5753 5754 /** 5755 * mpi3mr_cfg_get_driver_pg1 - Read current Driver page1 5756 * @mrioc: Adapter instance reference 5757 * @driver_pg1: Pointer to return Driver page 1 5758 * @pg_sz: Size of the memory allocated to the page pointer 5759 * 5760 * This is handler for config page read for the Driver page1. 5761 * This routine checks ioc_status to decide whether the page 5762 * read is success or not. 5763 * 5764 * Return: 0 on success, non-zero on failure. 5765 */ 5766 int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc, 5767 struct mpi3_driver_page1 *driver_pg1, u16 pg_sz) 5768 { 5769 struct mpi3_config_page_header cfg_hdr; 5770 struct mpi3_config_request cfg_req; 5771 u16 ioc_status = 0; 5772 5773 memset(driver_pg1, 0, pg_sz); 5774 memset(&cfg_hdr, 0, sizeof(cfg_hdr)); 5775 memset(&cfg_req, 0, sizeof(cfg_req)); 5776 5777 cfg_req.function = MPI3_FUNCTION_CONFIG; 5778 cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; 5779 cfg_req.page_type = MPI3_CONFIG_PAGETYPE_DRIVER; 5780 cfg_req.page_number = 1; 5781 cfg_req.page_address = 0; 5782 5783 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, 5784 MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { 5785 ioc_err(mrioc, "driver page1 header read failed\n"); 5786 goto out_failed; 5787 } 5788 if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5789 ioc_err(mrioc, "driver page1 header read failed with ioc_status(0x%04x)\n", 5790 ioc_status); 5791 goto out_failed; 5792 } 5793 cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; 5794 5795 if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, 5796 MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, driver_pg1, pg_sz)) { 5797 ioc_err(mrioc, "driver page1 read failed\n"); 5798 goto out_failed; 5799 } 5800 if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { 5801 ioc_err(mrioc, "driver page1 read failed with ioc_status(0x%04x)\n", 5802 ioc_status); 5803 goto out_failed; 5804 } 5805 return 0; 5806 out_failed: 5807 return -1; 5808 } 5809