1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Driver for Broadcom MPI3 Storage Controllers 4 * 5 * Copyright (C) 2017-2022 Broadcom Inc. 6 * (mailto: mpi3mr-linuxdrv.pdl@broadcom.com) 7 * 8 */ 9 10 #ifndef MPI3MR_H_INCLUDED 11 #define MPI3MR_H_INCLUDED 12 13 #include <linux/blkdev.h> 14 #include <linux/blk-mq.h> 15 #include <linux/blk-mq-pci.h> 16 #include <linux/delay.h> 17 #include <linux/dmapool.h> 18 #include <linux/errno.h> 19 #include <linux/init.h> 20 #include <linux/io.h> 21 #include <linux/interrupt.h> 22 #include <linux/kernel.h> 23 #include <linux/miscdevice.h> 24 #include <linux/module.h> 25 #include <linux/pci.h> 26 #include <linux/poll.h> 27 #include <linux/sched.h> 28 #include <linux/slab.h> 29 #include <linux/types.h> 30 #include <linux/uaccess.h> 31 #include <linux/utsname.h> 32 #include <linux/workqueue.h> 33 #include <asm/unaligned.h> 34 #include <scsi/scsi.h> 35 #include <scsi/scsi_cmnd.h> 36 #include <scsi/scsi_dbg.h> 37 #include <scsi/scsi_device.h> 38 #include <scsi/scsi_host.h> 39 #include <scsi/scsi_tcq.h> 40 #include <uapi/scsi/scsi_bsg_mpi3mr.h> 41 #include <scsi/scsi_transport_sas.h> 42 43 #include "mpi/mpi30_transport.h" 44 #include "mpi/mpi30_cnfg.h" 45 #include "mpi/mpi30_image.h" 46 #include "mpi/mpi30_init.h" 47 #include "mpi/mpi30_ioc.h" 48 #include "mpi/mpi30_sas.h" 49 #include "mpi/mpi30_pci.h" 50 #include "mpi3mr_debug.h" 51 52 /* Global list and lock for storing multiple adapters managed by the driver */ 53 extern spinlock_t mrioc_list_lock; 54 extern struct list_head mrioc_list; 55 extern int prot_mask; 56 extern atomic64_t event_counter; 57 58 #define MPI3MR_DRIVER_VERSION "8.2.0.3.0" 59 #define MPI3MR_DRIVER_RELDATE "08-September-2022" 60 61 #define MPI3MR_DRIVER_NAME "mpi3mr" 62 #define MPI3MR_DRIVER_LICENSE "GPL" 63 #define MPI3MR_DRIVER_AUTHOR "Broadcom Inc. <mpi3mr-linuxdrv.pdl@broadcom.com>" 64 #define MPI3MR_DRIVER_DESC "MPI3 Storage Controller Device Driver" 65 66 #define MPI3MR_NAME_LENGTH 32 67 #define IOCNAME "%s: " 68 69 #define MPI3MR_MAX_SECTORS 2048 70 71 /* Definitions for internal SGL and Chain SGL buffers */ 72 #define MPI3MR_PAGE_SIZE_4K 4096 73 #define MPI3MR_SG_DEPTH (MPI3MR_PAGE_SIZE_4K / sizeof(struct mpi3_sge_common)) 74 75 /* Definitions for MAX values for shost */ 76 #define MPI3MR_MAX_CMDS_LUN 128 77 #define MPI3MR_MAX_CDB_LENGTH 32 78 79 /* Admin queue management definitions */ 80 #define MPI3MR_ADMIN_REQ_Q_SIZE (2 * MPI3MR_PAGE_SIZE_4K) 81 #define MPI3MR_ADMIN_REPLY_Q_SIZE (4 * MPI3MR_PAGE_SIZE_4K) 82 #define MPI3MR_ADMIN_REQ_FRAME_SZ 128 83 #define MPI3MR_ADMIN_REPLY_FRAME_SZ 16 84 85 /* Operational queue management definitions */ 86 #define MPI3MR_OP_REQ_Q_QD 512 87 #define MPI3MR_OP_REP_Q_QD 1024 88 #define MPI3MR_OP_REP_Q_QD4K 4096 89 #define MPI3MR_OP_REQ_Q_SEG_SIZE 4096 90 #define MPI3MR_OP_REP_Q_SEG_SIZE 4096 91 #define MPI3MR_MAX_SEG_LIST_SIZE 4096 92 93 /* Reserved Host Tag definitions */ 94 #define MPI3MR_HOSTTAG_INVALID 0xFFFF 95 #define MPI3MR_HOSTTAG_INITCMDS 1 96 #define MPI3MR_HOSTTAG_BSG_CMDS 2 97 #define MPI3MR_HOSTTAG_PEL_ABORT 3 98 #define MPI3MR_HOSTTAG_PEL_WAIT 4 99 #define MPI3MR_HOSTTAG_BLK_TMS 5 100 #define MPI3MR_HOSTTAG_CFG_CMDS 6 101 #define MPI3MR_HOSTTAG_TRANSPORT_CMDS 7 102 103 #define MPI3MR_NUM_DEVRMCMD 16 104 #define MPI3MR_HOSTTAG_DEVRMCMD_MIN (MPI3MR_HOSTTAG_TRANSPORT_CMDS + 1) 105 #define MPI3MR_HOSTTAG_DEVRMCMD_MAX (MPI3MR_HOSTTAG_DEVRMCMD_MIN + \ 106 MPI3MR_NUM_DEVRMCMD - 1) 107 108 #define MPI3MR_INTERNAL_CMDS_RESVD MPI3MR_HOSTTAG_DEVRMCMD_MAX 109 #define MPI3MR_NUM_EVTACKCMD 4 110 #define MPI3MR_HOSTTAG_EVTACKCMD_MIN (MPI3MR_HOSTTAG_DEVRMCMD_MAX + 1) 111 #define MPI3MR_HOSTTAG_EVTACKCMD_MAX (MPI3MR_HOSTTAG_EVTACKCMD_MIN + \ 112 MPI3MR_NUM_EVTACKCMD - 1) 113 114 /* Reduced resource count definition for crash kernel */ 115 #define MPI3MR_HOST_IOS_KDUMP 128 116 117 /* command/controller interaction timeout definitions in seconds */ 118 #define MPI3MR_INTADMCMD_TIMEOUT 60 119 #define MPI3MR_PORTENABLE_TIMEOUT 300 120 #define MPI3MR_PORTENABLE_POLL_INTERVAL 5 121 #define MPI3MR_ABORTTM_TIMEOUT 60 122 #define MPI3MR_RESETTM_TIMEOUT 60 123 #define MPI3MR_RESET_HOST_IOWAIT_TIMEOUT 5 124 #define MPI3MR_TSUPDATE_INTERVAL 900 125 #define MPI3MR_DEFAULT_SHUTDOWN_TIME 120 126 #define MPI3MR_RAID_ERRREC_RESET_TIMEOUT 180 127 #define MPI3MR_PREPARE_FOR_RESET_TIMEOUT 180 128 #define MPI3MR_RESET_ACK_TIMEOUT 30 129 130 #define MPI3MR_WATCHDOG_INTERVAL 1000 /* in milli seconds */ 131 132 #define MPI3MR_DEFAULT_CFG_PAGE_SZ 1024 /* in bytes */ 133 134 #define MPI3MR_RESET_TOPOLOGY_SETTLE_TIME 10 135 136 #define MPI3MR_SCMD_TIMEOUT (60 * HZ) 137 #define MPI3MR_EH_SCMD_TIMEOUT (60 * HZ) 138 139 /* Internal admin command state definitions*/ 140 #define MPI3MR_CMD_NOTUSED 0x8000 141 #define MPI3MR_CMD_COMPLETE 0x0001 142 #define MPI3MR_CMD_PENDING 0x0002 143 #define MPI3MR_CMD_REPLY_VALID 0x0004 144 #define MPI3MR_CMD_RESET 0x0008 145 146 /* Definitions for Event replies and sense buffer allocated per controller */ 147 #define MPI3MR_NUM_EVT_REPLIES 64 148 #define MPI3MR_SENSE_BUF_SZ 256 149 #define MPI3MR_SENSEBUF_FACTOR 3 150 #define MPI3MR_CHAINBUF_FACTOR 3 151 #define MPI3MR_CHAINBUFDIX_FACTOR 2 152 153 /* Invalid target device handle */ 154 #define MPI3MR_INVALID_DEV_HANDLE 0xFFFF 155 156 /* Controller Reset related definitions */ 157 #define MPI3MR_HOSTDIAG_UNLOCK_RETRY_COUNT 5 158 #define MPI3MR_MAX_RESET_RETRY_COUNT 3 159 160 /* ResponseCode definitions */ 161 #define MPI3MR_RI_MASK_RESPCODE (0x000000FF) 162 #define MPI3MR_RSP_IO_QUEUED_ON_IOC \ 163 MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC 164 165 #define MPI3MR_DEFAULT_MDTS (128 * 1024) 166 #define MPI3MR_DEFAULT_PGSZEXP (12) 167 168 /* Command retry count definitions */ 169 #define MPI3MR_DEV_RMHS_RETRY_COUNT 3 170 #define MPI3MR_PEL_RETRY_COUNT 3 171 172 /* Default target device queue depth */ 173 #define MPI3MR_DEFAULT_SDEV_QD 32 174 175 /* Definitions for Threaded IRQ poll*/ 176 #define MPI3MR_IRQ_POLL_SLEEP 2 177 #define MPI3MR_IRQ_POLL_TRIGGER_IOCOUNT 8 178 179 /* Definitions for the controller security status*/ 180 #define MPI3MR_CTLR_SECURITY_STATUS_MASK 0x0C 181 #define MPI3MR_CTLR_SECURE_DBG_STATUS_MASK 0x02 182 183 #define MPI3MR_INVALID_DEVICE 0x00 184 #define MPI3MR_CONFIG_SECURE_DEVICE 0x04 185 #define MPI3MR_HARD_SECURE_DEVICE 0x08 186 #define MPI3MR_TAMPERED_DEVICE 0x0C 187 188 /* SGE Flag definition */ 189 #define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \ 190 (MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \ 191 MPI3_SGE_FLAGS_END_OF_LIST) 192 193 /* MSI Index from Reply Queue Index */ 194 #define REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, offset) (qidx + offset) 195 196 /* 197 * Maximum data transfer size definitions for management 198 * application commands 199 */ 200 #define MPI3MR_MAX_APP_XFER_SIZE (1 * 1024 * 1024) 201 #define MPI3MR_MAX_APP_XFER_SEGMENTS 512 202 /* 203 * 2048 sectors are for data buffers and additional 512 sectors for 204 * other buffers 205 */ 206 #define MPI3MR_MAX_APP_XFER_SECTORS (2048 + 512) 207 208 /** 209 * struct mpi3mr_nvme_pt_sge - Structure to store SGEs for NVMe 210 * Encapsulated commands. 211 * 212 * @base_addr: Physical address 213 * @length: SGE length 214 * @rsvd: Reserved 215 * @rsvd1: Reserved 216 * @sgl_type: sgl type 217 */ 218 struct mpi3mr_nvme_pt_sge { 219 u64 base_addr; 220 u32 length; 221 u16 rsvd; 222 u8 rsvd1; 223 u8 sgl_type; 224 }; 225 226 /** 227 * struct mpi3mr_buf_map - local structure to 228 * track kernel and user buffers associated with an BSG 229 * structure. 230 * 231 * @bsg_buf: BSG buffer virtual address 232 * @bsg_buf_len: BSG buffer length 233 * @kern_buf: Kernel buffer virtual address 234 * @kern_buf_len: Kernel buffer length 235 * @kern_buf_dma: Kernel buffer DMA address 236 * @data_dir: Data direction. 237 */ 238 struct mpi3mr_buf_map { 239 void *bsg_buf; 240 u32 bsg_buf_len; 241 void *kern_buf; 242 u32 kern_buf_len; 243 dma_addr_t kern_buf_dma; 244 u8 data_dir; 245 }; 246 247 /* IOC State definitions */ 248 enum mpi3mr_iocstate { 249 MRIOC_STATE_READY = 1, 250 MRIOC_STATE_RESET, 251 MRIOC_STATE_FAULT, 252 MRIOC_STATE_BECOMING_READY, 253 MRIOC_STATE_RESET_REQUESTED, 254 MRIOC_STATE_UNRECOVERABLE, 255 }; 256 257 /* Reset reason code definitions*/ 258 enum mpi3mr_reset_reason { 259 MPI3MR_RESET_FROM_BRINGUP = 1, 260 MPI3MR_RESET_FROM_FAULT_WATCH = 2, 261 MPI3MR_RESET_FROM_APP = 3, 262 MPI3MR_RESET_FROM_EH_HOS = 4, 263 MPI3MR_RESET_FROM_TM_TIMEOUT = 5, 264 MPI3MR_RESET_FROM_APP_TIMEOUT = 6, 265 MPI3MR_RESET_FROM_MUR_FAILURE = 7, 266 MPI3MR_RESET_FROM_CTLR_CLEANUP = 8, 267 MPI3MR_RESET_FROM_CIACTIV_FAULT = 9, 268 MPI3MR_RESET_FROM_PE_TIMEOUT = 10, 269 MPI3MR_RESET_FROM_TSU_TIMEOUT = 11, 270 MPI3MR_RESET_FROM_DELREQQ_TIMEOUT = 12, 271 MPI3MR_RESET_FROM_DELREPQ_TIMEOUT = 13, 272 MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT = 14, 273 MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT = 15, 274 MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT = 16, 275 MPI3MR_RESET_FROM_IOCINIT_TIMEOUT = 17, 276 MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT = 18, 277 MPI3MR_RESET_FROM_EVTACK_TIMEOUT = 19, 278 MPI3MR_RESET_FROM_CIACTVRST_TIMER = 20, 279 MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT = 21, 280 MPI3MR_RESET_FROM_PELABORT_TIMEOUT = 22, 281 MPI3MR_RESET_FROM_SYSFS = 23, 282 MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24, 283 MPI3MR_RESET_FROM_FIRMWARE = 27, 284 MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT = 29, 285 MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT = 30, 286 }; 287 288 /* Queue type definitions */ 289 enum queue_type { 290 MPI3MR_DEFAULT_QUEUE = 0, 291 MPI3MR_POLL_QUEUE, 292 }; 293 294 /** 295 * struct mpi3mr_compimg_ver - replica of component image 296 * version defined in mpi30_image.h in host endianness 297 * 298 */ 299 struct mpi3mr_compimg_ver { 300 u16 build_num; 301 u16 cust_id; 302 u8 ph_minor; 303 u8 ph_major; 304 u8 gen_minor; 305 u8 gen_major; 306 }; 307 308 /** 309 * struct mpi3mr_ioc_facs - replica of component image version 310 * defined in mpi30_ioc.h in host endianness 311 * 312 */ 313 struct mpi3mr_ioc_facts { 314 u32 ioc_capabilities; 315 struct mpi3mr_compimg_ver fw_ver; 316 u32 mpi_version; 317 u16 max_reqs; 318 u16 product_id; 319 u16 op_req_sz; 320 u16 reply_sz; 321 u16 exceptions; 322 u16 max_perids; 323 u16 max_pds; 324 u16 max_sasexpanders; 325 u16 max_sasinitiators; 326 u16 max_enclosures; 327 u16 max_pcie_switches; 328 u16 max_nvme; 329 u16 max_vds; 330 u16 max_hpds; 331 u16 max_advhpds; 332 u16 max_raid_pds; 333 u16 min_devhandle; 334 u16 max_devhandle; 335 u16 max_op_req_q; 336 u16 max_op_reply_q; 337 u16 shutdown_timeout; 338 u8 ioc_num; 339 u8 who_init; 340 u16 max_msix_vectors; 341 u8 personality; 342 u8 dma_mask; 343 u8 protocol_flags; 344 u8 sge_mod_mask; 345 u8 sge_mod_value; 346 u8 sge_mod_shift; 347 u8 max_dev_per_tg; 348 u16 max_io_throttle_group; 349 u16 io_throttle_data_length; 350 u16 io_throttle_low; 351 u16 io_throttle_high; 352 353 }; 354 355 /** 356 * struct segments - memory descriptor structure to store 357 * virtual and dma addresses for operational queue segments. 358 * 359 * @segment: virtual address 360 * @segment_dma: dma address 361 */ 362 struct segments { 363 void *segment; 364 dma_addr_t segment_dma; 365 }; 366 367 /** 368 * struct op_req_qinfo - Operational Request Queue Information 369 * 370 * @ci: consumer index 371 * @pi: producer index 372 * @num_request: Maximum number of entries in the queue 373 * @qid: Queue Id starting from 1 374 * @reply_qid: Associated reply queue Id 375 * @num_segments: Number of discontiguous memory segments 376 * @segment_qd: Depth of each segments 377 * @q_lock: Concurrent queue access lock 378 * @q_segments: Segment descriptor pointer 379 * @q_segment_list: Segment list base virtual address 380 * @q_segment_list_dma: Segment list base DMA address 381 */ 382 struct op_req_qinfo { 383 u16 ci; 384 u16 pi; 385 u16 num_requests; 386 u16 qid; 387 u16 reply_qid; 388 u16 num_segments; 389 u16 segment_qd; 390 spinlock_t q_lock; 391 struct segments *q_segments; 392 void *q_segment_list; 393 dma_addr_t q_segment_list_dma; 394 }; 395 396 /** 397 * struct op_reply_qinfo - Operational Reply Queue Information 398 * 399 * @ci: consumer index 400 * @qid: Queue Id starting from 1 401 * @num_replies: Maximum number of entries in the queue 402 * @num_segments: Number of discontiguous memory segments 403 * @segment_qd: Depth of each segments 404 * @q_segments: Segment descriptor pointer 405 * @q_segment_list: Segment list base virtual address 406 * @q_segment_list_dma: Segment list base DMA address 407 * @ephase: Expected phased identifier for the reply queue 408 * @pend_ios: Number of IOs pending in HW for this queue 409 * @enable_irq_poll: Flag to indicate polling is enabled 410 * @in_use: Queue is handled by poll/ISR 411 * @qtype: Type of queue (types defined in enum queue_type) 412 */ 413 struct op_reply_qinfo { 414 u16 ci; 415 u16 qid; 416 u16 num_replies; 417 u16 num_segments; 418 u16 segment_qd; 419 struct segments *q_segments; 420 void *q_segment_list; 421 dma_addr_t q_segment_list_dma; 422 u8 ephase; 423 atomic_t pend_ios; 424 bool enable_irq_poll; 425 atomic_t in_use; 426 enum queue_type qtype; 427 }; 428 429 /** 430 * struct mpi3mr_intr_info - Interrupt cookie information 431 * 432 * @mrioc: Adapter instance reference 433 * @os_irq: irq number 434 * @msix_index: MSIx index 435 * @op_reply_q: Associated operational reply queue 436 * @name: Dev name for the irq claiming device 437 */ 438 struct mpi3mr_intr_info { 439 struct mpi3mr_ioc *mrioc; 440 int os_irq; 441 u16 msix_index; 442 struct op_reply_qinfo *op_reply_q; 443 char name[MPI3MR_NAME_LENGTH]; 444 }; 445 446 /** 447 * struct mpi3mr_throttle_group_info - Throttle group info 448 * 449 * @io_divert: Flag indicates io divert is on or off for the TG 450 * @need_qd_reduction: Flag to indicate QD reduction is needed 451 * @qd_reduction: Queue Depth reduction in units of 10% 452 * @fw_qd: QueueDepth value reported by the firmware 453 * @modified_qd: Modified QueueDepth value due to throttling 454 * @id: Throttle Group ID. 455 * @high: High limit to turn on throttling in 512 byte blocks 456 * @low: Low limit to turn off throttling in 512 byte blocks 457 * @pend_large_data_sz: Counter to track pending large data 458 */ 459 struct mpi3mr_throttle_group_info { 460 u8 io_divert; 461 u8 need_qd_reduction; 462 u8 qd_reduction; 463 u16 fw_qd; 464 u16 modified_qd; 465 u16 id; 466 u32 high; 467 u32 low; 468 atomic_t pend_large_data_sz; 469 }; 470 471 /* HBA port flags */ 472 #define MPI3MR_HBA_PORT_FLAG_DIRTY 0x01 473 474 /** 475 * struct mpi3mr_hba_port - HBA's port information 476 * @port_id: Port number 477 * @flags: HBA port flags 478 */ 479 struct mpi3mr_hba_port { 480 struct list_head list; 481 u8 port_id; 482 u8 flags; 483 }; 484 485 /** 486 * struct mpi3mr_sas_port - Internal SAS port information 487 * @port_list: List of ports belonging to a SAS node 488 * @num_phys: Number of phys associated with port 489 * @marked_responding: used while refresing the sas ports 490 * @lowest_phy: lowest phy ID of current sas port 491 * @phy_mask: phy_mask of current sas port 492 * @hba_port: HBA port entry 493 * @remote_identify: Attached device identification 494 * @rphy: SAS transport layer rphy object 495 * @port: SAS transport layer port object 496 * @phy_list: mpi3mr_sas_phy objects belonging to this port 497 */ 498 struct mpi3mr_sas_port { 499 struct list_head port_list; 500 u8 num_phys; 501 u8 marked_responding; 502 int lowest_phy; 503 u32 phy_mask; 504 struct mpi3mr_hba_port *hba_port; 505 struct sas_identify remote_identify; 506 struct sas_rphy *rphy; 507 struct sas_port *port; 508 struct list_head phy_list; 509 }; 510 511 /** 512 * struct mpi3mr_sas_phy - Internal SAS Phy information 513 * @port_siblings: List of phys belonging to a port 514 * @identify: Phy identification 515 * @remote_identify: Attached device identification 516 * @phy: SAS transport layer Phy object 517 * @phy_id: Unique phy id within a port 518 * @handle: Firmware device handle for this phy 519 * @attached_handle: Firmware device handle for attached device 520 * @phy_belongs_to_port: Flag to indicate phy belongs to port 521 @hba_port: HBA port entry 522 */ 523 struct mpi3mr_sas_phy { 524 struct list_head port_siblings; 525 struct sas_identify identify; 526 struct sas_identify remote_identify; 527 struct sas_phy *phy; 528 u8 phy_id; 529 u16 handle; 530 u16 attached_handle; 531 u8 phy_belongs_to_port; 532 struct mpi3mr_hba_port *hba_port; 533 }; 534 535 /** 536 * struct mpi3mr_sas_node - SAS host/expander information 537 * @list: List of sas nodes in a controller 538 * @parent_dev: Parent device class 539 * @num_phys: Number phys belonging to sas_node 540 * @sas_address: SAS address of sas_node 541 * @handle: Firmware device handle for this sas_host/expander 542 * @sas_address_parent: SAS address of parent expander or host 543 * @enclosure_handle: Firmware handle of enclosure of this node 544 * @device_info: Capabilities of this sas_host/expander 545 * @non_responding: used to refresh the expander devices during reset 546 * @host_node: Flag to indicate this is a host_node 547 * @hba_port: HBA port entry 548 * @phy: A list of phys that make up this sas_host/expander 549 * @sas_port_list: List of internal ports of this node 550 * @rphy: sas_rphy object of this expander node 551 */ 552 struct mpi3mr_sas_node { 553 struct list_head list; 554 struct device *parent_dev; 555 u8 num_phys; 556 u64 sas_address; 557 u16 handle; 558 u64 sas_address_parent; 559 u16 enclosure_handle; 560 u64 enclosure_logical_id; 561 u8 non_responding; 562 u8 host_node; 563 struct mpi3mr_hba_port *hba_port; 564 struct mpi3mr_sas_phy *phy; 565 struct list_head sas_port_list; 566 struct sas_rphy *rphy; 567 }; 568 569 /** 570 * struct mpi3mr_enclosure_node - enclosure information 571 * @list: List of enclosures 572 * @pg0: Enclosure page 0; 573 */ 574 struct mpi3mr_enclosure_node { 575 struct list_head list; 576 struct mpi3_enclosure_page0 pg0; 577 }; 578 579 /** 580 * struct tgt_dev_sas_sata - SAS/SATA device specific 581 * information cached from firmware given data 582 * 583 * @sas_address: World wide unique SAS address 584 * @sas_address_parent: Sas address of parent expander or host 585 * @dev_info: Device information bits 586 * @phy_id: Phy identifier provided in device page 0 587 * @attached_phy_id: Attached phy identifier provided in device page 0 588 * @sas_transport_attached: Is this device exposed to transport 589 * @pend_sas_rphy_add: Flag to check device is in process of add 590 * @hba_port: HBA port entry 591 * @rphy: SAS transport layer rphy object 592 */ 593 struct tgt_dev_sas_sata { 594 u64 sas_address; 595 u64 sas_address_parent; 596 u16 dev_info; 597 u8 phy_id; 598 u8 attached_phy_id; 599 u8 sas_transport_attached; 600 u8 pend_sas_rphy_add; 601 struct mpi3mr_hba_port *hba_port; 602 struct sas_rphy *rphy; 603 }; 604 605 /** 606 * struct tgt_dev_pcie - PCIe device specific information cached 607 * from firmware given data 608 * 609 * @mdts: Maximum data transfer size 610 * @capb: Device capabilities 611 * @pgsz: Device page size 612 * @abort_to: Timeout for abort TM 613 * @reset_to: Timeout for Target/LUN reset TM 614 * @dev_info: Device information bits 615 */ 616 struct tgt_dev_pcie { 617 u32 mdts; 618 u16 capb; 619 u8 pgsz; 620 u8 abort_to; 621 u8 reset_to; 622 u16 dev_info; 623 }; 624 625 /** 626 * struct tgt_dev_vd - virtual device specific information 627 * cached from firmware given data 628 * 629 * @state: State of the VD 630 * @tg_qd_reduction: Queue Depth reduction in units of 10% 631 * @tg_id: VDs throttle group ID 632 * @high: High limit to turn on throttling in 512 byte blocks 633 * @low: Low limit to turn off throttling in 512 byte blocks 634 * @tg: Pointer to throttle group info 635 */ 636 struct tgt_dev_vd { 637 u8 state; 638 u8 tg_qd_reduction; 639 u16 tg_id; 640 u32 tg_high; 641 u32 tg_low; 642 struct mpi3mr_throttle_group_info *tg; 643 }; 644 645 646 /** 647 * union _form_spec_inf - union of device specific information 648 */ 649 union _form_spec_inf { 650 struct tgt_dev_sas_sata sas_sata_inf; 651 struct tgt_dev_pcie pcie_inf; 652 struct tgt_dev_vd vd_inf; 653 }; 654 655 656 657 /** 658 * struct mpi3mr_tgt_dev - target device data structure 659 * 660 * @list: List pointer 661 * @starget: Scsi_target pointer 662 * @dev_handle: FW device handle 663 * @parent_handle: FW parent device handle 664 * @slot: Slot number 665 * @encl_handle: FW enclosure handle 666 * @perst_id: FW assigned Persistent ID 667 * @devpg0_flag: Device Page0 flag 668 * @dev_type: SAS/SATA/PCIE device type 669 * @is_hidden: Should be exposed to upper layers or not 670 * @host_exposed: Already exposed to host or not 671 * @io_unit_port: IO Unit port ID 672 * @non_stl: Is this device not to be attached with SAS TL 673 * @io_throttle_enabled: I/O throttling needed or not 674 * @q_depth: Device specific Queue Depth 675 * @wwid: World wide ID 676 * @enclosure_logical_id: Enclosure logical identifier 677 * @dev_spec: Device type specific information 678 * @ref_count: Reference count 679 */ 680 struct mpi3mr_tgt_dev { 681 struct list_head list; 682 struct scsi_target *starget; 683 u16 dev_handle; 684 u16 parent_handle; 685 u16 slot; 686 u16 encl_handle; 687 u16 perst_id; 688 u16 devpg0_flag; 689 u8 dev_type; 690 u8 is_hidden; 691 u8 host_exposed; 692 u8 io_unit_port; 693 u8 non_stl; 694 u8 io_throttle_enabled; 695 u16 q_depth; 696 u64 wwid; 697 u64 enclosure_logical_id; 698 union _form_spec_inf dev_spec; 699 struct kref ref_count; 700 }; 701 702 /** 703 * mpi3mr_tgtdev_get - k reference incrementor 704 * @s: Target device reference 705 * 706 * Increment target device reference count. 707 */ 708 static inline void mpi3mr_tgtdev_get(struct mpi3mr_tgt_dev *s) 709 { 710 kref_get(&s->ref_count); 711 } 712 713 /** 714 * mpi3mr_free_tgtdev - target device memory dealloctor 715 * @r: k reference pointer of the target device 716 * 717 * Free target device memory when no reference. 718 */ 719 static inline void mpi3mr_free_tgtdev(struct kref *r) 720 { 721 kfree(container_of(r, struct mpi3mr_tgt_dev, ref_count)); 722 } 723 724 /** 725 * mpi3mr_tgtdev_put - k reference decrementor 726 * @s: Target device reference 727 * 728 * Decrement target device reference count. 729 */ 730 static inline void mpi3mr_tgtdev_put(struct mpi3mr_tgt_dev *s) 731 { 732 kref_put(&s->ref_count, mpi3mr_free_tgtdev); 733 } 734 735 736 /** 737 * struct mpi3mr_stgt_priv_data - SCSI target private structure 738 * 739 * @starget: Scsi_target pointer 740 * @dev_handle: FW device handle 741 * @perst_id: FW assigned Persistent ID 742 * @num_luns: Number of Logical Units 743 * @block_io: I/O blocked to the device or not 744 * @dev_removed: Device removed in the Firmware 745 * @dev_removedelay: Device is waiting to be removed in FW 746 * @dev_type: Device type 747 * @io_throttle_enabled: I/O throttling needed or not 748 * @io_divert: Flag indicates io divert is on or off for the dev 749 * @throttle_group: Pointer to throttle group info 750 * @tgt_dev: Internal target device pointer 751 * @pend_count: Counter to track pending I/Os during error 752 * handling 753 */ 754 struct mpi3mr_stgt_priv_data { 755 struct scsi_target *starget; 756 u16 dev_handle; 757 u16 perst_id; 758 u32 num_luns; 759 atomic_t block_io; 760 u8 dev_removed; 761 u8 dev_removedelay; 762 u8 dev_type; 763 u8 io_throttle_enabled; 764 u8 io_divert; 765 struct mpi3mr_throttle_group_info *throttle_group; 766 struct mpi3mr_tgt_dev *tgt_dev; 767 u32 pend_count; 768 }; 769 770 /** 771 * struct mpi3mr_stgt_priv_data - SCSI device private structure 772 * 773 * @tgt_priv_data: Scsi_target private data pointer 774 * @lun_id: LUN ID of the device 775 * @ncq_prio_enable: NCQ priority enable for SATA device 776 * @pend_count: Counter to track pending I/Os during error 777 * handling 778 */ 779 struct mpi3mr_sdev_priv_data { 780 struct mpi3mr_stgt_priv_data *tgt_priv_data; 781 u32 lun_id; 782 u8 ncq_prio_enable; 783 u32 pend_count; 784 }; 785 786 /** 787 * struct mpi3mr_drv_cmd - Internal command tracker 788 * 789 * @mutex: Command mutex 790 * @done: Completeor for wakeup 791 * @reply: Firmware reply for internal commands 792 * @sensebuf: Sensebuf for SCSI IO commands 793 * @iou_rc: IO Unit control reason code 794 * @state: Command State 795 * @dev_handle: Firmware handle for device specific commands 796 * @ioc_status: IOC status from the firmware 797 * @ioc_loginfo:IOC log info from the firmware 798 * @is_waiting: Is the command issued in block mode 799 * @is_sense: Is Sense data present 800 * @retry_count: Retry count for retriable commands 801 * @host_tag: Host tag used by the command 802 * @callback: Callback for non blocking commands 803 */ 804 struct mpi3mr_drv_cmd { 805 struct mutex mutex; 806 struct completion done; 807 void *reply; 808 u8 *sensebuf; 809 u8 iou_rc; 810 u16 state; 811 u16 dev_handle; 812 u16 ioc_status; 813 u32 ioc_loginfo; 814 u8 is_waiting; 815 u8 is_sense; 816 u8 retry_count; 817 u16 host_tag; 818 819 void (*callback)(struct mpi3mr_ioc *mrioc, 820 struct mpi3mr_drv_cmd *drv_cmd); 821 }; 822 823 /** 824 * struct dma_memory_desc - memory descriptor structure to store 825 * virtual address, dma address and size for any generic dma 826 * memory allocations in the driver. 827 * 828 * @size: buffer size 829 * @addr: virtual address 830 * @dma_addr: dma address 831 */ 832 struct dma_memory_desc { 833 u32 size; 834 void *addr; 835 dma_addr_t dma_addr; 836 }; 837 838 839 /** 840 * struct chain_element - memory descriptor structure to store 841 * virtual and dma addresses for chain elements. 842 * 843 * @addr: virtual address 844 * @dma_addr: dma address 845 */ 846 struct chain_element { 847 void *addr; 848 dma_addr_t dma_addr; 849 }; 850 851 /** 852 * struct scmd_priv - SCSI command private data 853 * 854 * @host_tag: Host tag specific to operational queue 855 * @in_lld_scope: Command in LLD scope or not 856 * @meta_sg_valid: DIX command with meta data SGL or not 857 * @scmd: SCSI Command pointer 858 * @req_q_idx: Operational request queue index 859 * @chain_idx: Chain frame index 860 * @meta_chain_idx: Chain frame index of meta data SGL 861 * @mpi3mr_scsiio_req: MPI SCSI IO request 862 */ 863 struct scmd_priv { 864 u16 host_tag; 865 u8 in_lld_scope; 866 u8 meta_sg_valid; 867 struct scsi_cmnd *scmd; 868 u16 req_q_idx; 869 int chain_idx; 870 int meta_chain_idx; 871 u8 mpi3mr_scsiio_req[MPI3MR_ADMIN_REQ_FRAME_SZ]; 872 }; 873 874 /** 875 * struct mpi3mr_ioc - Adapter anchor structure stored in shost 876 * private data 877 * 878 * @list: List pointer 879 * @pdev: PCI device pointer 880 * @shost: Scsi_Host pointer 881 * @id: Controller ID 882 * @cpu_count: Number of online CPUs 883 * @irqpoll_sleep: usleep unit used in threaded isr irqpoll 884 * @name: Controller ASCII name 885 * @driver_name: Driver ASCII name 886 * @sysif_regs: System interface registers virtual address 887 * @sysif_regs_phys: System interface registers physical address 888 * @bars: PCI BARS 889 * @dma_mask: DMA mask 890 * @msix_count: Number of MSIX vectors used 891 * @intr_enabled: Is interrupts enabled 892 * @num_admin_req: Number of admin requests 893 * @admin_req_q_sz: Admin request queue size 894 * @admin_req_pi: Admin request queue producer index 895 * @admin_req_ci: Admin request queue consumer index 896 * @admin_req_base: Admin request queue base virtual address 897 * @admin_req_dma: Admin request queue base dma address 898 * @admin_req_lock: Admin queue access lock 899 * @num_admin_replies: Number of admin replies 900 * @admin_reply_q_sz: Admin reply queue size 901 * @admin_reply_ci: Admin reply queue consumer index 902 * @admin_reply_ephase:Admin reply queue expected phase 903 * @admin_reply_base: Admin reply queue base virtual address 904 * @admin_reply_dma: Admin reply queue base dma address 905 * @admin_reply_q_in_use: Queue is handled by poll/ISR 906 * @ready_timeout: Controller ready timeout 907 * @intr_info: Interrupt cookie pointer 908 * @intr_info_count: Number of interrupt cookies 909 * @is_intr_info_set: Flag to indicate intr info is setup 910 * @num_queues: Number of operational queues 911 * @num_op_req_q: Number of operational request queues 912 * @req_qinfo: Operational request queue info pointer 913 * @num_op_reply_q: Number of operational reply queues 914 * @op_reply_qinfo: Operational reply queue info pointer 915 * @init_cmds: Command tracker for initialization commands 916 * @cfg_cmds: Command tracker for configuration requests 917 * @facts: Cached IOC facts data 918 * @op_reply_desc_sz: Operational reply descriptor size 919 * @num_reply_bufs: Number of reply buffers allocated 920 * @reply_buf_pool: Reply buffer pool 921 * @reply_buf: Reply buffer base virtual address 922 * @reply_buf_dma: Reply buffer DMA address 923 * @reply_buf_dma_max_address: Reply DMA address max limit 924 * @reply_free_qsz: Reply free queue size 925 * @reply_free_q_pool: Reply free queue pool 926 * @reply_free_q: Reply free queue base virtual address 927 * @reply_free_q_dma: Reply free queue base DMA address 928 * @reply_free_queue_lock: Reply free queue lock 929 * @reply_free_queue_host_index: Reply free queue host index 930 * @num_sense_bufs: Number of sense buffers 931 * @sense_buf_pool: Sense buffer pool 932 * @sense_buf: Sense buffer base virtual address 933 * @sense_buf_dma: Sense buffer base DMA address 934 * @sense_buf_q_sz: Sense buffer queue size 935 * @sense_buf_q_pool: Sense buffer queue pool 936 * @sense_buf_q: Sense buffer queue virtual address 937 * @sense_buf_q_dma: Sense buffer queue DMA address 938 * @sbq_lock: Sense buffer queue lock 939 * @sbq_host_index: Sense buffer queuehost index 940 * @event_masks: Event mask bitmap 941 * @fwevt_worker_name: Firmware event worker thread name 942 * @fwevt_worker_thread: Firmware event worker thread 943 * @fwevt_lock: Firmware event lock 944 * @fwevt_list: Firmware event list 945 * @watchdog_work_q_name: Fault watchdog worker thread name 946 * @watchdog_work_q: Fault watchdog worker thread 947 * @watchdog_work: Fault watchdog work 948 * @watchdog_lock: Fault watchdog lock 949 * @is_driver_loading: Is driver still loading 950 * @scan_started: Async scan started 951 * @scan_failed: Asycn scan failed 952 * @stop_drv_processing: Stop all command processing 953 * @device_refresh_on: Don't process the events until devices are refreshed 954 * @max_host_ios: Maximum host I/O count 955 * @chain_buf_count: Chain buffer count 956 * @chain_buf_pool: Chain buffer pool 957 * @chain_sgl_list: Chain SGL list 958 * @chain_bitmap: Chain buffer allocator bitmap 959 * @chain_buf_lock: Chain buffer list lock 960 * @bsg_cmds: Command tracker for BSG command 961 * @host_tm_cmds: Command tracker for task management commands 962 * @dev_rmhs_cmds: Command tracker for device removal commands 963 * @evtack_cmds: Command tracker for event ack commands 964 * @devrem_bitmap: Device removal bitmap 965 * @dev_handle_bitmap_bits: Number of bits in device handle bitmap 966 * @removepend_bitmap: Remove pending bitmap 967 * @delayed_rmhs_list: Delayed device removal list 968 * @evtack_cmds_bitmap: Event Ack bitmap 969 * @delayed_evtack_cmds_list: Delayed event acknowledgment list 970 * @ts_update_counter: Timestamp update counter 971 * @reset_in_progress: Reset in progress flag 972 * @unrecoverable: Controller unrecoverable flag 973 * @prev_reset_result: Result of previous reset 974 * @reset_mutex: Controller reset mutex 975 * @reset_waitq: Controller reset wait queue 976 * @prepare_for_reset: Prepare for reset event received 977 * @prepare_for_reset_timeout_counter: Prepare for reset timeout 978 * @prp_list_virt: NVMe encapsulated PRP list virtual base 979 * @prp_list_dma: NVMe encapsulated PRP list DMA 980 * @prp_sz: NVME encapsulated PRP list size 981 * @diagsave_timeout: Diagnostic information save timeout 982 * @logging_level: Controller debug logging level 983 * @flush_io_count: I/O count to flush after reset 984 * @current_event: Firmware event currently in process 985 * @driver_info: Driver, Kernel, OS information to firmware 986 * @change_count: Topology change count 987 * @pel_enabled: Persistent Event Log(PEL) enabled or not 988 * @pel_abort_requested: PEL abort is requested or not 989 * @pel_class: PEL Class identifier 990 * @pel_locale: PEL Locale identifier 991 * @pel_cmds: Command tracker for PEL wait command 992 * @pel_abort_cmd: Command tracker for PEL abort command 993 * @pel_newest_seqnum: Newest PEL sequenece number 994 * @pel_seqnum_virt: PEL sequence number virtual address 995 * @pel_seqnum_dma: PEL sequence number DMA address 996 * @pel_seqnum_sz: PEL sequenece number size 997 * @op_reply_q_offset: Operational reply queue offset with MSIx 998 * @default_qcount: Total Default queues 999 * @active_poll_qcount: Currently active poll queue count 1000 * @requested_poll_qcount: User requested poll queue count 1001 * @bsg_dev: BSG device structure 1002 * @bsg_queue: Request queue for BSG device 1003 * @stop_bsgs: Stop BSG request flag 1004 * @logdata_buf: Circular buffer to store log data entries 1005 * @logdata_buf_idx: Index of entry in buffer to store 1006 * @logdata_entry_sz: log data entry size 1007 * @pend_large_data_sz: Counter to track pending large data 1008 * @io_throttle_data_length: I/O size to track in 512b blocks 1009 * @io_throttle_high: I/O size to start throttle in 512b blocks 1010 * @io_throttle_low: I/O size to stop throttle in 512b blocks 1011 * @num_io_throttle_group: Maximum number of throttle groups 1012 * @throttle_groups: Pointer to throttle group info structures 1013 * @cfg_page: Default memory for configuration pages 1014 * @cfg_page_dma: Configuration page DMA address 1015 * @cfg_page_sz: Default configuration page memory size 1016 * @sas_transport_enabled: SAS transport enabled or not 1017 * @scsi_device_channel: Channel ID for SCSI devices 1018 * @transport_cmds: Command tracker for SAS transport commands 1019 * @sas_hba: SAS node for the controller 1020 * @sas_expander_list: SAS node list of expanders 1021 * @sas_node_lock: Lock to protect SAS node list 1022 * @hba_port_table_list: List of HBA Ports 1023 * @enclosure_list: List of Enclosure objects 1024 */ 1025 struct mpi3mr_ioc { 1026 struct list_head list; 1027 struct pci_dev *pdev; 1028 struct Scsi_Host *shost; 1029 u8 id; 1030 int cpu_count; 1031 bool enable_segqueue; 1032 u32 irqpoll_sleep; 1033 1034 char name[MPI3MR_NAME_LENGTH]; 1035 char driver_name[MPI3MR_NAME_LENGTH]; 1036 1037 volatile struct mpi3_sysif_registers __iomem *sysif_regs; 1038 resource_size_t sysif_regs_phys; 1039 int bars; 1040 u64 dma_mask; 1041 1042 u16 msix_count; 1043 u8 intr_enabled; 1044 1045 u16 num_admin_req; 1046 u32 admin_req_q_sz; 1047 u16 admin_req_pi; 1048 u16 admin_req_ci; 1049 void *admin_req_base; 1050 dma_addr_t admin_req_dma; 1051 spinlock_t admin_req_lock; 1052 1053 u16 num_admin_replies; 1054 u32 admin_reply_q_sz; 1055 u16 admin_reply_ci; 1056 u8 admin_reply_ephase; 1057 void *admin_reply_base; 1058 dma_addr_t admin_reply_dma; 1059 atomic_t admin_reply_q_in_use; 1060 1061 u32 ready_timeout; 1062 1063 struct mpi3mr_intr_info *intr_info; 1064 u16 intr_info_count; 1065 bool is_intr_info_set; 1066 1067 u16 num_queues; 1068 u16 num_op_req_q; 1069 struct op_req_qinfo *req_qinfo; 1070 1071 u16 num_op_reply_q; 1072 struct op_reply_qinfo *op_reply_qinfo; 1073 1074 struct mpi3mr_drv_cmd init_cmds; 1075 struct mpi3mr_drv_cmd cfg_cmds; 1076 struct mpi3mr_ioc_facts facts; 1077 u16 op_reply_desc_sz; 1078 1079 u32 num_reply_bufs; 1080 struct dma_pool *reply_buf_pool; 1081 u8 *reply_buf; 1082 dma_addr_t reply_buf_dma; 1083 dma_addr_t reply_buf_dma_max_address; 1084 1085 u16 reply_free_qsz; 1086 u16 reply_sz; 1087 struct dma_pool *reply_free_q_pool; 1088 __le64 *reply_free_q; 1089 dma_addr_t reply_free_q_dma; 1090 spinlock_t reply_free_queue_lock; 1091 u32 reply_free_queue_host_index; 1092 1093 u32 num_sense_bufs; 1094 struct dma_pool *sense_buf_pool; 1095 u8 *sense_buf; 1096 dma_addr_t sense_buf_dma; 1097 1098 u16 sense_buf_q_sz; 1099 struct dma_pool *sense_buf_q_pool; 1100 __le64 *sense_buf_q; 1101 dma_addr_t sense_buf_q_dma; 1102 spinlock_t sbq_lock; 1103 u32 sbq_host_index; 1104 u32 event_masks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS]; 1105 1106 char fwevt_worker_name[MPI3MR_NAME_LENGTH]; 1107 struct workqueue_struct *fwevt_worker_thread; 1108 spinlock_t fwevt_lock; 1109 struct list_head fwevt_list; 1110 1111 char watchdog_work_q_name[20]; 1112 struct workqueue_struct *watchdog_work_q; 1113 struct delayed_work watchdog_work; 1114 spinlock_t watchdog_lock; 1115 1116 u8 is_driver_loading; 1117 u8 scan_started; 1118 u16 scan_failed; 1119 u8 stop_drv_processing; 1120 u8 device_refresh_on; 1121 1122 u16 max_host_ios; 1123 spinlock_t tgtdev_lock; 1124 struct list_head tgtdev_list; 1125 1126 u32 chain_buf_count; 1127 struct dma_pool *chain_buf_pool; 1128 struct chain_element *chain_sgl_list; 1129 void *chain_bitmap; 1130 spinlock_t chain_buf_lock; 1131 1132 struct mpi3mr_drv_cmd bsg_cmds; 1133 struct mpi3mr_drv_cmd host_tm_cmds; 1134 struct mpi3mr_drv_cmd dev_rmhs_cmds[MPI3MR_NUM_DEVRMCMD]; 1135 struct mpi3mr_drv_cmd evtack_cmds[MPI3MR_NUM_EVTACKCMD]; 1136 void *devrem_bitmap; 1137 u16 dev_handle_bitmap_bits; 1138 void *removepend_bitmap; 1139 struct list_head delayed_rmhs_list; 1140 void *evtack_cmds_bitmap; 1141 struct list_head delayed_evtack_cmds_list; 1142 1143 u32 ts_update_counter; 1144 u8 reset_in_progress; 1145 u8 unrecoverable; 1146 int prev_reset_result; 1147 struct mutex reset_mutex; 1148 wait_queue_head_t reset_waitq; 1149 1150 u8 prepare_for_reset; 1151 u16 prepare_for_reset_timeout_counter; 1152 1153 void *prp_list_virt; 1154 dma_addr_t prp_list_dma; 1155 u32 prp_sz; 1156 1157 u16 diagsave_timeout; 1158 int logging_level; 1159 u16 flush_io_count; 1160 1161 struct mpi3mr_fwevt *current_event; 1162 struct mpi3_driver_info_layout driver_info; 1163 u16 change_count; 1164 1165 u8 pel_enabled; 1166 u8 pel_abort_requested; 1167 u8 pel_class; 1168 u16 pel_locale; 1169 struct mpi3mr_drv_cmd pel_cmds; 1170 struct mpi3mr_drv_cmd pel_abort_cmd; 1171 1172 u32 pel_newest_seqnum; 1173 void *pel_seqnum_virt; 1174 dma_addr_t pel_seqnum_dma; 1175 u32 pel_seqnum_sz; 1176 1177 u16 op_reply_q_offset; 1178 u16 default_qcount; 1179 u16 active_poll_qcount; 1180 u16 requested_poll_qcount; 1181 1182 struct device bsg_dev; 1183 struct request_queue *bsg_queue; 1184 u8 stop_bsgs; 1185 u8 *logdata_buf; 1186 u16 logdata_buf_idx; 1187 u16 logdata_entry_sz; 1188 1189 atomic_t pend_large_data_sz; 1190 u32 io_throttle_data_length; 1191 u32 io_throttle_high; 1192 u32 io_throttle_low; 1193 u16 num_io_throttle_group; 1194 struct mpi3mr_throttle_group_info *throttle_groups; 1195 1196 void *cfg_page; 1197 dma_addr_t cfg_page_dma; 1198 u16 cfg_page_sz; 1199 1200 u8 sas_transport_enabled; 1201 u8 scsi_device_channel; 1202 struct mpi3mr_drv_cmd transport_cmds; 1203 struct mpi3mr_sas_node sas_hba; 1204 struct list_head sas_expander_list; 1205 spinlock_t sas_node_lock; 1206 struct list_head hba_port_table_list; 1207 struct list_head enclosure_list; 1208 }; 1209 1210 /** 1211 * struct mpi3mr_fwevt - Firmware event structure. 1212 * 1213 * @list: list head 1214 * @work: Work structure 1215 * @mrioc: Adapter instance reference 1216 * @event_id: MPI3 firmware event ID 1217 * @send_ack: Event acknowledgment required or not 1218 * @process_evt: Bottomhalf processing required or not 1219 * @evt_ctx: Event context to send in Ack 1220 * @event_data_size: size of the event data in bytes 1221 * @pending_at_sml: waiting for device add/remove API to complete 1222 * @discard: discard this event 1223 * @ref_count: kref count 1224 * @event_data: Actual MPI3 event data 1225 */ 1226 struct mpi3mr_fwevt { 1227 struct list_head list; 1228 struct work_struct work; 1229 struct mpi3mr_ioc *mrioc; 1230 u16 event_id; 1231 bool send_ack; 1232 bool process_evt; 1233 u32 evt_ctx; 1234 u16 event_data_size; 1235 bool pending_at_sml; 1236 bool discard; 1237 struct kref ref_count; 1238 char event_data[] __aligned(4); 1239 }; 1240 1241 1242 /** 1243 * struct delayed_dev_rmhs_node - Delayed device removal node 1244 * 1245 * @list: list head 1246 * @handle: Device handle 1247 * @iou_rc: IO Unit Control Reason Code 1248 */ 1249 struct delayed_dev_rmhs_node { 1250 struct list_head list; 1251 u16 handle; 1252 u8 iou_rc; 1253 }; 1254 1255 /** 1256 * struct delayed_evt_ack_node - Delayed event ack node 1257 * @list: list head 1258 * @event: MPI3 event ID 1259 * @event_ctx: event context 1260 */ 1261 struct delayed_evt_ack_node { 1262 struct list_head list; 1263 u8 event; 1264 u32 event_ctx; 1265 }; 1266 1267 int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc); 1268 void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc); 1269 int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc); 1270 int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume); 1271 void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc); 1272 int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async); 1273 int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req, 1274 u16 admin_req_sz, u8 ignore_reset); 1275 int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc, 1276 struct op_req_qinfo *opreqq, u8 *req); 1277 void mpi3mr_add_sg_single(void *paddr, u8 flags, u32 length, 1278 dma_addr_t dma_addr); 1279 void mpi3mr_build_zero_len_sge(void *paddr); 1280 void *mpi3mr_get_sensebuf_virt_addr(struct mpi3mr_ioc *mrioc, 1281 dma_addr_t phys_addr); 1282 void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc, 1283 dma_addr_t phys_addr); 1284 void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc, 1285 u64 sense_buf_dma); 1286 1287 void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc); 1288 void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc); 1289 void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc, 1290 struct mpi3_event_notification_reply *event_reply); 1291 void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc, 1292 struct mpi3_default_reply_descriptor *reply_desc, 1293 u64 *reply_dma, u16 qidx); 1294 void mpi3mr_start_watchdog(struct mpi3mr_ioc *mrioc); 1295 void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc); 1296 1297 int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc, 1298 u32 reset_reason, u8 snapdump); 1299 void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc); 1300 void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc); 1301 1302 enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc); 1303 int mpi3mr_process_event_ack(struct mpi3mr_ioc *mrioc, u8 event, 1304 u32 event_ctx); 1305 1306 void mpi3mr_wait_for_host_io(struct mpi3mr_ioc *mrioc, u32 timeout); 1307 void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc); 1308 void mpi3mr_flush_host_io(struct mpi3mr_ioc *mrioc); 1309 void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc); 1310 void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc); 1311 void mpi3mr_flush_delayed_cmd_lists(struct mpi3mr_ioc *mrioc); 1312 void mpi3mr_check_rh_fault_ioc(struct mpi3mr_ioc *mrioc, u32 reason_code); 1313 void mpi3mr_print_fault_info(struct mpi3mr_ioc *mrioc); 1314 void mpi3mr_check_rh_fault_ioc(struct mpi3mr_ioc *mrioc, u32 reason_code); 1315 int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc, 1316 struct op_reply_qinfo *op_reply_q); 1317 int mpi3mr_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num); 1318 void mpi3mr_bsg_init(struct mpi3mr_ioc *mrioc); 1319 void mpi3mr_bsg_exit(struct mpi3mr_ioc *mrioc); 1320 int mpi3mr_issue_tm(struct mpi3mr_ioc *mrioc, u8 tm_type, 1321 u16 handle, uint lun, u16 htag, ulong timeout, 1322 struct mpi3mr_drv_cmd *drv_cmd, 1323 u8 *resp_code, struct scsi_cmnd *scmd); 1324 struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle( 1325 struct mpi3mr_ioc *mrioc, u16 handle); 1326 void mpi3mr_pel_get_seqnum_complete(struct mpi3mr_ioc *mrioc, 1327 struct mpi3mr_drv_cmd *drv_cmd); 1328 int mpi3mr_pel_get_seqnum_post(struct mpi3mr_ioc *mrioc, 1329 struct mpi3mr_drv_cmd *drv_cmd); 1330 void mpi3mr_app_save_logdata(struct mpi3mr_ioc *mrioc, char *event_data, 1331 u16 event_data_size); 1332 struct mpi3mr_enclosure_node *mpi3mr_enclosure_find_by_handle( 1333 struct mpi3mr_ioc *mrioc, u16 handle); 1334 extern const struct attribute_group *mpi3mr_host_groups[]; 1335 extern const struct attribute_group *mpi3mr_dev_groups[]; 1336 1337 extern struct sas_function_template mpi3mr_transport_functions; 1338 extern struct scsi_transport_template *mpi3mr_transport_template; 1339 1340 int mpi3mr_cfg_get_dev_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 1341 struct mpi3_device_page0 *dev_pg0, u16 pg_sz, u32 form, u32 form_spec); 1342 int mpi3mr_cfg_get_sas_phy_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 1343 struct mpi3_sas_phy_page0 *phy_pg0, u16 pg_sz, u32 form, 1344 u32 form_spec); 1345 int mpi3mr_cfg_get_sas_phy_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 1346 struct mpi3_sas_phy_page1 *phy_pg1, u16 pg_sz, u32 form, 1347 u32 form_spec); 1348 int mpi3mr_cfg_get_sas_exp_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 1349 struct mpi3_sas_expander_page0 *exp_pg0, u16 pg_sz, u32 form, 1350 u32 form_spec); 1351 int mpi3mr_cfg_get_sas_exp_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 1352 struct mpi3_sas_expander_page1 *exp_pg1, u16 pg_sz, u32 form, 1353 u32 form_spec); 1354 int mpi3mr_cfg_get_enclosure_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, 1355 struct mpi3_enclosure_page0 *encl_pg0, u16 pg_sz, u32 form, 1356 u32 form_spec); 1357 int mpi3mr_cfg_get_sas_io_unit_pg0(struct mpi3mr_ioc *mrioc, 1358 struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0, u16 pg_sz); 1359 int mpi3mr_cfg_get_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc, 1360 struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz); 1361 int mpi3mr_cfg_set_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc, 1362 struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz); 1363 int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc, 1364 struct mpi3_driver_page1 *driver_pg1, u16 pg_sz); 1365 1366 u8 mpi3mr_is_expander_device(u16 device_info); 1367 int mpi3mr_expander_add(struct mpi3mr_ioc *mrioc, u16 handle); 1368 void mpi3mr_expander_remove(struct mpi3mr_ioc *mrioc, u64 sas_address, 1369 struct mpi3mr_hba_port *hba_port); 1370 struct mpi3mr_sas_node *__mpi3mr_expander_find_by_handle(struct mpi3mr_ioc 1371 *mrioc, u16 handle); 1372 struct mpi3mr_hba_port *mpi3mr_get_hba_port_by_id(struct mpi3mr_ioc *mrioc, 1373 u8 port_id); 1374 void mpi3mr_sas_host_refresh(struct mpi3mr_ioc *mrioc); 1375 void mpi3mr_sas_host_add(struct mpi3mr_ioc *mrioc); 1376 void mpi3mr_update_links(struct mpi3mr_ioc *mrioc, 1377 u64 sas_address_parent, u16 handle, u8 phy_number, u8 link_rate, 1378 struct mpi3mr_hba_port *hba_port); 1379 void mpi3mr_remove_tgtdev_from_host(struct mpi3mr_ioc *mrioc, 1380 struct mpi3mr_tgt_dev *tgtdev); 1381 int mpi3mr_report_tgtdev_to_sas_transport(struct mpi3mr_ioc *mrioc, 1382 struct mpi3mr_tgt_dev *tgtdev); 1383 void mpi3mr_remove_tgtdev_from_sas_transport(struct mpi3mr_ioc *mrioc, 1384 struct mpi3mr_tgt_dev *tgtdev); 1385 struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_addr_and_rphy( 1386 struct mpi3mr_ioc *mrioc, u64 sas_address, struct sas_rphy *rphy); 1387 void mpi3mr_print_device_event_notice(struct mpi3mr_ioc *mrioc, 1388 bool device_add); 1389 void mpi3mr_refresh_sas_ports(struct mpi3mr_ioc *mrioc); 1390 void mpi3mr_refresh_expanders(struct mpi3mr_ioc *mrioc); 1391 void mpi3mr_add_event_wait_for_device_refresh(struct mpi3mr_ioc *mrioc); 1392 void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc); 1393 void mpi3mr_flush_cmds_for_unrecovered_controller(struct mpi3mr_ioc *mrioc); 1394 void mpi3mr_free_enclosure_list(struct mpi3mr_ioc *mrioc); 1395 int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc); 1396 void mpi3mr_expander_node_remove(struct mpi3mr_ioc *mrioc, 1397 struct mpi3mr_sas_node *sas_expander); 1398 #endif /*MPI3MR_H_INCLUDED*/ 1399