1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * 4 * Linux MegaRAID device driver 5 * 6 * Copyright (c) 2003-2004 LSI Logic Corporation. 7 * 8 * FILE : megaraid_mbox.h 9 */ 10 11 #ifndef _MEGARAID_H_ 12 #define _MEGARAID_H_ 13 14 15 #include "mega_common.h" 16 #include "mbox_defs.h" 17 #include "megaraid_ioctl.h" 18 19 20 #define MEGARAID_VERSION "2.20.5.1" 21 #define MEGARAID_EXT_VERSION "(Release Date: Thu Nov 16 15:32:35 EST 2006)" 22 23 24 /* 25 * Define some PCI values here until they are put in the kernel 26 */ 27 #define PCI_DEVICE_ID_PERC4_DI_DISCOVERY 0x000E 28 #define PCI_SUBSYS_ID_PERC4_DI_DISCOVERY 0x0123 29 30 #define PCI_DEVICE_ID_PERC4_SC 0x1960 31 #define PCI_SUBSYS_ID_PERC4_SC 0x0520 32 33 #define PCI_DEVICE_ID_PERC4_DC 0x1960 34 #define PCI_SUBSYS_ID_PERC4_DC 0x0518 35 36 #define PCI_DEVICE_ID_VERDE 0x0407 37 38 #define PCI_DEVICE_ID_PERC4_DI_EVERGLADES 0x000F 39 #define PCI_SUBSYS_ID_PERC4_DI_EVERGLADES 0x014A 40 41 #define PCI_DEVICE_ID_PERC4E_SI_BIGBEND 0x0013 42 #define PCI_SUBSYS_ID_PERC4E_SI_BIGBEND 0x016c 43 44 #define PCI_DEVICE_ID_PERC4E_DI_KOBUK 0x0013 45 #define PCI_SUBSYS_ID_PERC4E_DI_KOBUK 0x016d 46 47 #define PCI_DEVICE_ID_PERC4E_DI_CORVETTE 0x0013 48 #define PCI_SUBSYS_ID_PERC4E_DI_CORVETTE 0x016e 49 50 #define PCI_DEVICE_ID_PERC4E_DI_EXPEDITION 0x0013 51 #define PCI_SUBSYS_ID_PERC4E_DI_EXPEDITION 0x016f 52 53 #define PCI_DEVICE_ID_PERC4E_DI_GUADALUPE 0x0013 54 #define PCI_SUBSYS_ID_PERC4E_DI_GUADALUPE 0x0170 55 56 #define PCI_DEVICE_ID_DOBSON 0x0408 57 58 #define PCI_DEVICE_ID_MEGARAID_SCSI_320_0 0x1960 59 #define PCI_SUBSYS_ID_MEGARAID_SCSI_320_0 0xA520 60 61 #define PCI_DEVICE_ID_MEGARAID_SCSI_320_1 0x1960 62 #define PCI_SUBSYS_ID_MEGARAID_SCSI_320_1 0x0520 63 64 #define PCI_DEVICE_ID_MEGARAID_SCSI_320_2 0x1960 65 #define PCI_SUBSYS_ID_MEGARAID_SCSI_320_2 0x0518 66 67 #define PCI_DEVICE_ID_MEGARAID_I4_133_RAID 0x1960 68 #define PCI_SUBSYS_ID_MEGARAID_I4_133_RAID 0x0522 69 70 #define PCI_DEVICE_ID_MEGARAID_SATA_150_4 0x1960 71 #define PCI_SUBSYS_ID_MEGARAID_SATA_150_4 0x4523 72 73 #define PCI_DEVICE_ID_MEGARAID_SATA_150_6 0x1960 74 #define PCI_SUBSYS_ID_MEGARAID_SATA_150_6 0x0523 75 76 #define PCI_DEVICE_ID_LINDSAY 0x0409 77 78 #define PCI_DEVICE_ID_INTEL_RAID_SRCS16 0x1960 79 #define PCI_SUBSYS_ID_INTEL_RAID_SRCS16 0x0523 80 81 #define PCI_DEVICE_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK 0x1960 82 #define PCI_SUBSYS_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK 0x0520 83 84 #define PCI_SUBSYS_ID_PERC3_QC 0x0471 85 #define PCI_SUBSYS_ID_PERC3_DC 0x0493 86 #define PCI_SUBSYS_ID_PERC3_SC 0x0475 87 #define PCI_SUBSYS_ID_CERC_ATA100_4CH 0x0511 88 89 90 #define MBOX_MAX_SCSI_CMDS 128 // number of cmds reserved for kernel 91 #define MBOX_MAX_USER_CMDS 32 // number of cmds for applications 92 #define MBOX_DEF_CMD_PER_LUN 64 // default commands per lun 93 #define MBOX_DEFAULT_SG_SIZE 26 // default sg size supported by all fw 94 #define MBOX_MAX_SG_SIZE 32 // maximum scatter-gather list size 95 #define MBOX_MAX_SECTORS 128 // maximum sectors per IO 96 #define MBOX_TIMEOUT 30 // timeout value for internal cmds 97 #define MBOX_BUSY_WAIT 10 // max usec to wait for busy mailbox 98 #define MBOX_RESET_WAIT 180 // wait these many seconds in reset 99 #define MBOX_RESET_EXT_WAIT 120 // extended wait reset 100 #define MBOX_SYNC_WAIT_CNT 0xFFFF // wait loop index for synchronous mode 101 102 #define MBOX_SYNC_DELAY_200 200 // 200 micro-seconds 103 104 /* 105 * maximum transfer that can happen through the firmware commands issued 106 * internnaly from the driver. 107 */ 108 #define MBOX_IBUF_SIZE 4096 109 110 111 /** 112 * mbox_ccb_t - command control block specific to mailbox based controllers 113 * @raw_mbox : raw mailbox pointer 114 * @mbox : mailbox 115 * @mbox64 : extended mailbox 116 * @mbox_dma_h : mailbox dma address 117 * @sgl64 : 64-bit scatter-gather list 118 * @sgl32 : 32-bit scatter-gather list 119 * @sgl_dma_h : dma handle for the scatter-gather list 120 * @pthru : passthru structure 121 * @pthru_dma_h : dma handle for the passthru structure 122 * @epthru : extended passthru structure 123 * @epthru_dma_h : dma handle for extended passthru structure 124 * @buf_dma_h : dma handle for buffers w/o sg list 125 * 126 * command control block specific to the mailbox based controllers 127 */ 128 typedef struct { 129 uint8_t *raw_mbox; 130 mbox_t *mbox; 131 mbox64_t *mbox64; 132 dma_addr_t mbox_dma_h; 133 mbox_sgl64 *sgl64; 134 mbox_sgl32 *sgl32; 135 dma_addr_t sgl_dma_h; 136 mraid_passthru_t *pthru; 137 dma_addr_t pthru_dma_h; 138 mraid_epassthru_t *epthru; 139 dma_addr_t epthru_dma_h; 140 dma_addr_t buf_dma_h; 141 } mbox_ccb_t; 142 143 144 /** 145 * mraid_device_t - adapter soft state structure for mailbox controllers 146 * @una_mbox64 : 64-bit mbox - unaligned 147 * @una_mbox64_dma : mbox dma addr - unaligned 148 * @mbox : 32-bit mbox - aligned 149 * @mbox64 : 64-bit mbox - aligned 150 * @mbox_dma : mbox dma addr - aligned 151 * @mailbox_lock : exclusion lock for the mailbox 152 * @baseport : base port of hba memory 153 * @baseaddr : mapped addr of hba memory 154 * @mbox_pool : pool of mailboxes 155 * @mbox_pool_handle : handle for the mailbox pool memory 156 * @epthru_pool : a pool for extended passthru commands 157 * @epthru_pool_handle : handle to the pool above 158 * @sg_pool : pool of scatter-gather lists for this driver 159 * @sg_pool_handle : handle to the pool above 160 * @ccb_list : list of our command control blocks 161 * @uccb_list : list of cmd control blocks for mgmt module 162 * @umbox64 : array of mailbox for user commands (cmm) 163 * @pdrv_state : array for state of each physical drive. 164 * @last_disp : flag used to show device scanning 165 * @hw_error : set if FW not responding 166 * @fast_load : If set, skip physical device scanning 167 * @channel_class : channel class, RAID or SCSI 168 * @sysfs_mtx : mutex to serialize access to sysfs res. 169 * @sysfs_uioc : management packet to issue FW calls from sysfs 170 * @sysfs_mbox64 : mailbox packet to issue FW calls from sysfs 171 * @sysfs_buffer : data buffer for FW commands issued from sysfs 172 * @sysfs_buffer_dma : DMA buffer for FW commands issued from sysfs 173 * @sysfs_wait_q : wait queue for sysfs operations 174 * @random_del_supported : set if the random deletion is supported 175 * @curr_ldmap : current LDID map 176 * 177 * Initialization structure for mailbox controllers: memory based and IO based 178 * All the fields in this structure are LLD specific and may be discovered at 179 * init() or start() time. 180 * 181 * NOTE: The fields of this structures are placed to minimize cache misses 182 */ 183 #define MAX_LD_EXTENDED64 64 184 typedef struct { 185 mbox64_t *una_mbox64; 186 dma_addr_t una_mbox64_dma; 187 mbox_t *mbox; 188 mbox64_t *mbox64; 189 dma_addr_t mbox_dma; 190 spinlock_t mailbox_lock; 191 unsigned long baseport; 192 void __iomem * baseaddr; 193 struct mraid_pci_blk mbox_pool[MBOX_MAX_SCSI_CMDS]; 194 struct dma_pool *mbox_pool_handle; 195 struct mraid_pci_blk epthru_pool[MBOX_MAX_SCSI_CMDS]; 196 struct dma_pool *epthru_pool_handle; 197 struct mraid_pci_blk sg_pool[MBOX_MAX_SCSI_CMDS]; 198 struct dma_pool *sg_pool_handle; 199 mbox_ccb_t ccb_list[MBOX_MAX_SCSI_CMDS]; 200 mbox_ccb_t uccb_list[MBOX_MAX_USER_CMDS]; 201 mbox64_t umbox64[MBOX_MAX_USER_CMDS]; 202 203 uint8_t pdrv_state[MBOX_MAX_PHYSICAL_DRIVES]; 204 uint32_t last_disp; 205 int hw_error; 206 int fast_load; 207 uint8_t channel_class; 208 struct mutex sysfs_mtx; 209 uioc_t *sysfs_uioc; 210 mbox64_t *sysfs_mbox64; 211 caddr_t sysfs_buffer; 212 dma_addr_t sysfs_buffer_dma; 213 wait_queue_head_t sysfs_wait_q; 214 int random_del_supported; 215 uint16_t curr_ldmap[MAX_LD_EXTENDED64]; 216 } mraid_device_t; 217 218 // route to raid device from adapter 219 #define ADAP2RAIDDEV(adp) ((mraid_device_t *)((adp)->raid_device)) 220 221 #define MAILBOX_LOCK(rdev) (&(rdev)->mailbox_lock) 222 223 // Find out if this channel is a RAID or SCSI 224 #define IS_RAID_CH(rdev, ch) (((rdev)->channel_class >> (ch)) & 0x01) 225 226 227 #define RDINDOOR(rdev) readl((rdev)->baseaddr + 0x20) 228 #define RDOUTDOOR(rdev) readl((rdev)->baseaddr + 0x2C) 229 #define WRINDOOR(rdev, value) writel(value, (rdev)->baseaddr + 0x20) 230 #define WROUTDOOR(rdev, value) writel(value, (rdev)->baseaddr + 0x2C) 231 232 #endif // _MEGARAID_H_ 233 234 // vim: set ts=8 sw=8 tw=78: 235