1 /* 2 * Generic Macintosh NCR5380 driver 3 * 4 * Copyright 1998, Michael Schmitz <mschmitz@lbl.gov> 5 * 6 * derived in part from: 7 */ 8 /* 9 * Generic Generic NCR5380 driver 10 * 11 * Copyright 1995, Russell King 12 * 13 * ALPHA RELEASE 1. 14 * 15 * For more information, please consult 16 * 17 * NCR 5380 Family 18 * SCSI Protocol Controller 19 * Databook 20 * 21 * NCR Microelectronics 22 * 1635 Aeroplaza Drive 23 * Colorado Springs, CO 80916 24 * 1+ (719) 578-3400 25 * 1+ (800) 334-5454 26 */ 27 28 /* 29 * $Log: mac_NCR5380.c,v $ 30 */ 31 32 #include <linux/types.h> 33 #include <linux/stddef.h> 34 #include <linux/ctype.h> 35 #include <linux/delay.h> 36 37 #include <linux/module.h> 38 #include <linux/signal.h> 39 #include <linux/ioport.h> 40 #include <linux/init.h> 41 #include <linux/blkdev.h> 42 #include <linux/interrupt.h> 43 44 #include <asm/io.h> 45 #include <asm/irq.h> 46 #include <asm/system.h> 47 48 #include <asm/macintosh.h> 49 #include <asm/macints.h> 50 #include <asm/mac_via.h> 51 52 #include "scsi.h" 53 #include <scsi/scsi_host.h> 54 #include "mac_scsi.h" 55 56 /* These control the behaviour of the generic 5380 core */ 57 #define AUTOSENSE 58 #define PSEUDO_DMA 59 60 #include "NCR5380.h" 61 62 #if 0 63 #define NDEBUG (NDEBUG_INTR | NDEBUG_PSEUDO_DMA | NDEBUG_ARBITRATION | NDEBUG_SELECTION | NDEBUG_RESELECTION) 64 #else 65 #define NDEBUG (NDEBUG_ABORT) 66 #endif 67 68 #define RESET_BOOT 69 #define DRIVER_SETUP 70 71 extern void via_scsi_clear(void); 72 73 #ifdef RESET_BOOT 74 static void mac_scsi_reset_boot(struct Scsi_Host *instance); 75 #endif 76 77 static int setup_called = 0; 78 static int setup_can_queue = -1; 79 static int setup_cmd_per_lun = -1; 80 static int setup_sg_tablesize = -1; 81 static int setup_use_pdma = -1; 82 #ifdef SUPPORT_TAGS 83 static int setup_use_tagged_queuing = -1; 84 #endif 85 static int setup_hostid = -1; 86 87 /* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms, 88 * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more 89 * need ten times the standard value... */ 90 #define TOSHIBA_DELAY 91 92 #ifdef TOSHIBA_DELAY 93 #define AFTER_RESET_DELAY (5*HZ/2) 94 #else 95 #define AFTER_RESET_DELAY (HZ/2) 96 #endif 97 98 static volatile unsigned char *mac_scsi_regp = NULL; 99 static volatile unsigned char *mac_scsi_drq = NULL; 100 static volatile unsigned char *mac_scsi_nodrq = NULL; 101 102 103 /* 104 * NCR 5380 register access functions 105 */ 106 107 #if 0 108 /* Debug versions */ 109 #define CTRL(p,v) (*ctrl = (v)) 110 111 static char macscsi_read(struct Scsi_Host *instance, int reg) 112 { 113 int iobase = instance->io_port; 114 int i; 115 int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; 116 117 CTRL(iobase, 0); 118 i = in_8(iobase + (reg<<4)); 119 CTRL(iobase, 0x40); 120 121 return i; 122 } 123 124 static void macscsi_write(struct Scsi_Host *instance, int reg, int value) 125 { 126 int iobase = instance->io_port; 127 int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; 128 129 CTRL(iobase, 0); 130 out_8(iobase + (reg<<4), value); 131 CTRL(iobase, 0x40); 132 } 133 #else 134 135 /* Fast versions */ 136 static __inline__ char macscsi_read(struct Scsi_Host *instance, int reg) 137 { 138 return in_8(instance->io_port + (reg<<4)); 139 } 140 141 static __inline__ void macscsi_write(struct Scsi_Host *instance, int reg, int value) 142 { 143 out_8(instance->io_port + (reg<<4), value); 144 } 145 #endif 146 147 148 /* 149 * Function : mac_scsi_setup(char *str) 150 * 151 * Purpose : booter command line initialization of the overrides array, 152 * 153 * Inputs : str - comma delimited list of options 154 * 155 */ 156 157 static int __init mac_scsi_setup(char *str) { 158 #ifdef DRIVER_SETUP 159 int ints[7]; 160 161 (void)get_options( str, ARRAY_SIZE(ints), ints); 162 163 if (setup_called++ || ints[0] < 1 || ints[0] > 6) { 164 printk(KERN_WARNING "scsi: <mac5380>" 165 " Usage: mac5380=<can_queue>[,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>,<use_pdma>]\n"); 166 printk(KERN_ALERT "scsi: <mac5380> Bad Penguin parameters?\n"); 167 return 0; 168 } 169 170 if (ints[0] >= 1) { 171 if (ints[1] > 0) 172 /* no limits on this, just > 0 */ 173 setup_can_queue = ints[1]; 174 } 175 if (ints[0] >= 2) { 176 if (ints[2] > 0) 177 setup_cmd_per_lun = ints[2]; 178 } 179 if (ints[0] >= 3) { 180 if (ints[3] >= 0) { 181 setup_sg_tablesize = ints[3]; 182 /* Must be <= SG_ALL (255) */ 183 if (setup_sg_tablesize > SG_ALL) 184 setup_sg_tablesize = SG_ALL; 185 } 186 } 187 if (ints[0] >= 4) { 188 /* Must be between 0 and 7 */ 189 if (ints[4] >= 0 && ints[4] <= 7) 190 setup_hostid = ints[4]; 191 else if (ints[4] > 7) 192 printk(KERN_WARNING "mac_scsi_setup: invalid host ID %d !\n", ints[4] ); 193 } 194 #ifdef SUPPORT_TAGS 195 if (ints[0] >= 5) { 196 if (ints[5] >= 0) 197 setup_use_tagged_queuing = !!ints[5]; 198 } 199 200 if (ints[0] == 6) { 201 if (ints[6] >= 0) 202 setup_use_pdma = ints[6]; 203 } 204 #else 205 if (ints[0] == 5) { 206 if (ints[5] >= 0) 207 setup_use_pdma = ints[5]; 208 } 209 #endif /* SUPPORT_TAGS */ 210 211 #endif /* DRIVER_SETUP */ 212 return 1; 213 } 214 215 __setup("mac5380=", mac_scsi_setup); 216 217 /* 218 * Function : int macscsi_detect(struct scsi_host_template * tpnt) 219 * 220 * Purpose : initializes mac NCR5380 driver based on the 221 * command line / compile time port and irq definitions. 222 * 223 * Inputs : tpnt - template for this SCSI adapter. 224 * 225 * Returns : 1 if a host adapter was found, 0 if not. 226 * 227 */ 228 229 int __init macscsi_detect(struct scsi_host_template * tpnt) 230 { 231 static int called = 0; 232 int flags = 0; 233 struct Scsi_Host *instance; 234 235 if (!MACH_IS_MAC || called) 236 return( 0 ); 237 238 if (macintosh_config->scsi_type != MAC_SCSI_OLD) 239 return( 0 ); 240 241 /* setup variables */ 242 tpnt->can_queue = 243 (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE; 244 tpnt->cmd_per_lun = 245 (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN; 246 tpnt->sg_tablesize = 247 (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE; 248 249 if (setup_hostid >= 0) 250 tpnt->this_id = setup_hostid; 251 else { 252 /* use 7 as default */ 253 tpnt->this_id = 7; 254 } 255 256 #ifdef SUPPORT_TAGS 257 if (setup_use_tagged_queuing < 0) 258 setup_use_tagged_queuing = USE_TAGGED_QUEUING; 259 #endif 260 261 /* Once we support multiple 5380s (e.g. DuoDock) we'll do 262 something different here */ 263 instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata)); 264 265 if (macintosh_config->ident == MAC_MODEL_IIFX) { 266 mac_scsi_regp = via1+0x8000; 267 mac_scsi_drq = via1+0xE000; 268 mac_scsi_nodrq = via1+0xC000; 269 /* The IIFX should be able to do true DMA, but pseudo-dma doesn't work */ 270 flags = FLAG_NO_PSEUDO_DMA; 271 } else { 272 mac_scsi_regp = via1+0x10000; 273 mac_scsi_drq = via1+0x6000; 274 mac_scsi_nodrq = via1+0x12000; 275 } 276 277 if (! setup_use_pdma) 278 flags = FLAG_NO_PSEUDO_DMA; 279 280 instance->io_port = (unsigned long) mac_scsi_regp; 281 instance->irq = IRQ_MAC_SCSI; 282 283 #ifdef RESET_BOOT 284 mac_scsi_reset_boot(instance); 285 #endif 286 287 NCR5380_init(instance, flags); 288 289 instance->n_io_port = 255; 290 291 ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0; 292 293 if (instance->irq != SCSI_IRQ_NONE) 294 if (request_irq(instance->irq, NCR5380_intr, IRQ_FLG_SLOW, 295 "ncr5380", instance)) { 296 printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n", 297 instance->host_no, instance->irq); 298 instance->irq = SCSI_IRQ_NONE; 299 } 300 301 printk(KERN_INFO "scsi%d: generic 5380 at port %lX irq", instance->host_no, instance->io_port); 302 if (instance->irq == SCSI_IRQ_NONE) 303 printk (KERN_INFO "s disabled"); 304 else 305 printk (KERN_INFO " %d", instance->irq); 306 printk(KERN_INFO " options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", 307 instance->can_queue, instance->cmd_per_lun, MACSCSI_PUBLIC_RELEASE); 308 printk(KERN_INFO "\nscsi%d:", instance->host_no); 309 NCR5380_print_options(instance); 310 printk("\n"); 311 called = 1; 312 return 1; 313 } 314 315 int macscsi_release (struct Scsi_Host *shpnt) 316 { 317 if (shpnt->irq != SCSI_IRQ_NONE) 318 free_irq(shpnt->irq, shpnt); 319 NCR5380_exit(shpnt); 320 321 return 0; 322 } 323 324 #ifdef RESET_BOOT 325 /* 326 * Our 'bus reset on boot' function 327 */ 328 329 static void mac_scsi_reset_boot(struct Scsi_Host *instance) 330 { 331 unsigned long end; 332 333 NCR5380_local_declare(); 334 NCR5380_setup(instance); 335 336 /* 337 * Do a SCSI reset to clean up the bus during initialization. No messing 338 * with the queues, interrupts, or locks necessary here. 339 */ 340 341 printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." ); 342 343 /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */ 344 disable_irq(IRQ_MAC_SCSI); 345 346 /* get in phase */ 347 NCR5380_write( TARGET_COMMAND_REG, 348 PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) )); 349 350 /* assert RST */ 351 NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST ); 352 /* The min. reset hold time is 25us, so 40us should be enough */ 353 udelay( 50 ); 354 /* reset RST and interrupt */ 355 NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE ); 356 NCR5380_read( RESET_PARITY_INTERRUPT_REG ); 357 358 for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); ) 359 barrier(); 360 361 /* switch on SCSI IRQ again */ 362 enable_irq(IRQ_MAC_SCSI); 363 364 printk(KERN_INFO " done\n" ); 365 } 366 #endif 367 368 const char * macscsi_info (struct Scsi_Host *spnt) { 369 return ""; 370 } 371 372 /* 373 Pseudo-DMA: (Ove Edlund) 374 The code attempts to catch bus errors that occur if one for example 375 "trips over the cable". 376 XXX: Since bus errors in the PDMA routines never happen on my 377 computer, the bus error code is untested. 378 If the code works as intended, a bus error results in Pseudo-DMA 379 beeing disabled, meaning that the driver switches to slow handshake. 380 If bus errors are NOT extremely rare, this has to be changed. 381 */ 382 383 #define CP_IO_TO_MEM(s,d,len) \ 384 __asm__ __volatile__ \ 385 (" cmp.w #4,%2\n" \ 386 " bls 8f\n" \ 387 " move.w %1,%%d0\n" \ 388 " neg.b %%d0\n" \ 389 " and.w #3,%%d0\n" \ 390 " sub.w %%d0,%2\n" \ 391 " bra 2f\n" \ 392 " 1: move.b (%0),(%1)+\n" \ 393 " 2: dbf %%d0,1b\n" \ 394 " move.w %2,%%d0\n" \ 395 " lsr.w #5,%%d0\n" \ 396 " bra 4f\n" \ 397 " 3: move.l (%0),(%1)+\n" \ 398 "31: move.l (%0),(%1)+\n" \ 399 "32: move.l (%0),(%1)+\n" \ 400 "33: move.l (%0),(%1)+\n" \ 401 "34: move.l (%0),(%1)+\n" \ 402 "35: move.l (%0),(%1)+\n" \ 403 "36: move.l (%0),(%1)+\n" \ 404 "37: move.l (%0),(%1)+\n" \ 405 " 4: dbf %%d0,3b\n" \ 406 " move.w %2,%%d0\n" \ 407 " lsr.w #2,%%d0\n" \ 408 " and.w #7,%%d0\n" \ 409 " bra 6f\n" \ 410 " 5: move.l (%0),(%1)+\n" \ 411 " 6: dbf %%d0,5b\n" \ 412 " and.w #3,%2\n" \ 413 " bra 8f\n" \ 414 " 7: move.b (%0),(%1)+\n" \ 415 " 8: dbf %2,7b\n" \ 416 " moveq.l #0, %2\n" \ 417 " 9: \n" \ 418 ".section .fixup,\"ax\"\n" \ 419 " .even\n" \ 420 "90: moveq.l #1, %2\n" \ 421 " jra 9b\n" \ 422 ".previous\n" \ 423 ".section __ex_table,\"a\"\n" \ 424 " .align 4\n" \ 425 " .long 1b,90b\n" \ 426 " .long 3b,90b\n" \ 427 " .long 31b,90b\n" \ 428 " .long 32b,90b\n" \ 429 " .long 33b,90b\n" \ 430 " .long 34b,90b\n" \ 431 " .long 35b,90b\n" \ 432 " .long 36b,90b\n" \ 433 " .long 37b,90b\n" \ 434 " .long 5b,90b\n" \ 435 " .long 7b,90b\n" \ 436 ".previous" \ 437 : "=a"(s), "=a"(d), "=d"(len) \ 438 : "0"(s), "1"(d), "2"(len) \ 439 : "d0") 440 441 442 static int macscsi_pread (struct Scsi_Host *instance, 443 unsigned char *dst, int len) 444 { 445 unsigned char *d; 446 volatile unsigned char *s; 447 448 NCR5380_local_declare(); 449 NCR5380_setup(instance); 450 451 s = mac_scsi_drq+0x60; 452 d = dst; 453 454 /* These conditions are derived from MacOS */ 455 456 while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) 457 && !(NCR5380_read(STATUS_REG) & SR_REQ)) 458 ; 459 if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) 460 && (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) { 461 printk(KERN_ERR "Error in macscsi_pread\n"); 462 return -1; 463 } 464 465 CP_IO_TO_MEM(s, d, len); 466 467 if (len != 0) { 468 printk(KERN_NOTICE "Bus error in macscsi_pread\n"); 469 return -1; 470 } 471 472 return 0; 473 } 474 475 476 #define CP_MEM_TO_IO(s,d,len) \ 477 __asm__ __volatile__ \ 478 (" cmp.w #4,%2\n" \ 479 " bls 8f\n" \ 480 " move.w %0,%%d0\n" \ 481 " neg.b %%d0\n" \ 482 " and.w #3,%%d0\n" \ 483 " sub.w %%d0,%2\n" \ 484 " bra 2f\n" \ 485 " 1: move.b (%0)+,(%1)\n" \ 486 " 2: dbf %%d0,1b\n" \ 487 " move.w %2,%%d0\n" \ 488 " lsr.w #5,%%d0\n" \ 489 " bra 4f\n" \ 490 " 3: move.l (%0)+,(%1)\n" \ 491 "31: move.l (%0)+,(%1)\n" \ 492 "32: move.l (%0)+,(%1)\n" \ 493 "33: move.l (%0)+,(%1)\n" \ 494 "34: move.l (%0)+,(%1)\n" \ 495 "35: move.l (%0)+,(%1)\n" \ 496 "36: move.l (%0)+,(%1)\n" \ 497 "37: move.l (%0)+,(%1)\n" \ 498 " 4: dbf %%d0,3b\n" \ 499 " move.w %2,%%d0\n" \ 500 " lsr.w #2,%%d0\n" \ 501 " and.w #7,%%d0\n" \ 502 " bra 6f\n" \ 503 " 5: move.l (%0)+,(%1)\n" \ 504 " 6: dbf %%d0,5b\n" \ 505 " and.w #3,%2\n" \ 506 " bra 8f\n" \ 507 " 7: move.b (%0)+,(%1)\n" \ 508 " 8: dbf %2,7b\n" \ 509 " moveq.l #0, %2\n" \ 510 " 9: \n" \ 511 ".section .fixup,\"ax\"\n" \ 512 " .even\n" \ 513 "90: moveq.l #1, %2\n" \ 514 " jra 9b\n" \ 515 ".previous\n" \ 516 ".section __ex_table,\"a\"\n" \ 517 " .align 4\n" \ 518 " .long 1b,90b\n" \ 519 " .long 3b,90b\n" \ 520 " .long 31b,90b\n" \ 521 " .long 32b,90b\n" \ 522 " .long 33b,90b\n" \ 523 " .long 34b,90b\n" \ 524 " .long 35b,90b\n" \ 525 " .long 36b,90b\n" \ 526 " .long 37b,90b\n" \ 527 " .long 5b,90b\n" \ 528 " .long 7b,90b\n" \ 529 ".previous" \ 530 : "=a"(s), "=a"(d), "=d"(len) \ 531 : "0"(s), "1"(d), "2"(len) \ 532 : "d0") 533 534 static int macscsi_pwrite (struct Scsi_Host *instance, 535 unsigned char *src, int len) 536 { 537 unsigned char *s; 538 volatile unsigned char *d; 539 540 NCR5380_local_declare(); 541 NCR5380_setup(instance); 542 543 s = src; 544 d = mac_scsi_drq; 545 546 /* These conditions are derived from MacOS */ 547 548 while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) 549 && (!(NCR5380_read(STATUS_REG) & SR_REQ) 550 || (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))) 551 ; 552 if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) { 553 printk(KERN_ERR "Error in macscsi_pwrite\n"); 554 return -1; 555 } 556 557 CP_MEM_TO_IO(s, d, len); 558 559 if (len != 0) { 560 printk(KERN_NOTICE "Bus error in macscsi_pwrite\n"); 561 return -1; 562 } 563 564 return 0; 565 } 566 567 568 #include "NCR5380.c" 569 570 static struct scsi_host_template driver_template = { 571 .proc_name = "Mac5380", 572 .proc_info = macscsi_proc_info, 573 .name = "Macintosh NCR5380 SCSI", 574 .detect = macscsi_detect, 575 .release = macscsi_release, 576 .info = macscsi_info, 577 .queuecommand = macscsi_queue_command, 578 .eh_abort_handler = macscsi_abort, 579 .eh_bus_reset_handler = macscsi_bus_reset, 580 .can_queue = CAN_QUEUE, 581 .this_id = 7, 582 .sg_tablesize = SG_ALL, 583 .cmd_per_lun = CMD_PER_LUN, 584 .use_clustering = DISABLE_CLUSTERING 585 }; 586 587 588 #include "scsi_module.c" 589