1 /* 2 * Generic Macintosh NCR5380 driver 3 * 4 * Copyright 1998, Michael Schmitz <mschmitz@lbl.gov> 5 * 6 * derived in part from: 7 */ 8 /* 9 * Generic Generic NCR5380 driver 10 * 11 * Copyright 1995, Russell King 12 * 13 * ALPHA RELEASE 1. 14 * 15 * For more information, please consult 16 * 17 * NCR 5380 Family 18 * SCSI Protocol Controller 19 * Databook 20 * 21 * NCR Microelectronics 22 * 1635 Aeroplaza Drive 23 * Colorado Springs, CO 80916 24 * 1+ (719) 578-3400 25 * 1+ (800) 334-5454 26 */ 27 28 /* 29 * $Log: mac_NCR5380.c,v $ 30 */ 31 32 #include <linux/types.h> 33 #include <linux/stddef.h> 34 #include <linux/ctype.h> 35 #include <linux/delay.h> 36 37 #include <linux/module.h> 38 #include <linux/signal.h> 39 #include <linux/ioport.h> 40 #include <linux/init.h> 41 #include <linux/blkdev.h> 42 #include <linux/interrupt.h> 43 44 #include <asm/io.h> 45 #include <asm/irq.h> 46 #include <asm/system.h> 47 48 #include <asm/macintosh.h> 49 #include <asm/macints.h> 50 #include <asm/machw.h> 51 #include <asm/mac_via.h> 52 53 #include "scsi.h" 54 #include <scsi/scsi_host.h> 55 #include "mac_scsi.h" 56 57 /* These control the behaviour of the generic 5380 core */ 58 #define AUTOSENSE 59 #define PSEUDO_DMA 60 61 #include "NCR5380.h" 62 63 #if 0 64 #define NDEBUG (NDEBUG_INTR | NDEBUG_PSEUDO_DMA | NDEBUG_ARBITRATION | NDEBUG_SELECTION | NDEBUG_RESELECTION) 65 #else 66 #define NDEBUG (NDEBUG_ABORT) 67 #endif 68 69 #define RESET_BOOT 70 #define DRIVER_SETUP 71 72 extern void via_scsi_clear(void); 73 74 #ifdef RESET_BOOT 75 static void mac_scsi_reset_boot(struct Scsi_Host *instance); 76 #endif 77 78 static int setup_called = 0; 79 static int setup_can_queue = -1; 80 static int setup_cmd_per_lun = -1; 81 static int setup_sg_tablesize = -1; 82 static int setup_use_pdma = -1; 83 #ifdef SUPPORT_TAGS 84 static int setup_use_tagged_queuing = -1; 85 #endif 86 static int setup_hostid = -1; 87 88 /* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms, 89 * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more 90 * need ten times the standard value... */ 91 #define TOSHIBA_DELAY 92 93 #ifdef TOSHIBA_DELAY 94 #define AFTER_RESET_DELAY (5*HZ/2) 95 #else 96 #define AFTER_RESET_DELAY (HZ/2) 97 #endif 98 99 static volatile unsigned char *mac_scsi_regp = NULL; 100 static volatile unsigned char *mac_scsi_drq = NULL; 101 static volatile unsigned char *mac_scsi_nodrq = NULL; 102 103 104 /* 105 * NCR 5380 register access functions 106 */ 107 108 #if 0 109 /* Debug versions */ 110 #define CTRL(p,v) (*ctrl = (v)) 111 112 static char macscsi_read(struct Scsi_Host *instance, int reg) 113 { 114 int iobase = instance->io_port; 115 int i; 116 int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; 117 118 CTRL(iobase, 0); 119 i = in_8(iobase + (reg<<4)); 120 CTRL(iobase, 0x40); 121 122 return i; 123 } 124 125 static void macscsi_write(struct Scsi_Host *instance, int reg, int value) 126 { 127 int iobase = instance->io_port; 128 int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl; 129 130 CTRL(iobase, 0); 131 out_8(iobase + (reg<<4), value); 132 CTRL(iobase, 0x40); 133 } 134 #else 135 136 /* Fast versions */ 137 static __inline__ char macscsi_read(struct Scsi_Host *instance, int reg) 138 { 139 return in_8(instance->io_port + (reg<<4)); 140 } 141 142 static __inline__ void macscsi_write(struct Scsi_Host *instance, int reg, int value) 143 { 144 out_8(instance->io_port + (reg<<4), value); 145 } 146 #endif 147 148 149 /* 150 * Function : mac_scsi_setup(char *str) 151 * 152 * Purpose : booter command line initialization of the overrides array, 153 * 154 * Inputs : str - comma delimited list of options 155 * 156 */ 157 158 static int __init mac_scsi_setup(char *str) { 159 #ifdef DRIVER_SETUP 160 int ints[7]; 161 162 (void)get_options( str, ARRAY_SIZE(ints), ints); 163 164 if (setup_called++ || ints[0] < 1 || ints[0] > 6) { 165 printk(KERN_WARNING "scsi: <mac5380>" 166 " Usage: mac5380=<can_queue>[,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>,<use_pdma>]\n"); 167 printk(KERN_ALERT "scsi: <mac5380> Bad Penguin parameters?\n"); 168 return 0; 169 } 170 171 if (ints[0] >= 1) { 172 if (ints[1] > 0) 173 /* no limits on this, just > 0 */ 174 setup_can_queue = ints[1]; 175 } 176 if (ints[0] >= 2) { 177 if (ints[2] > 0) 178 setup_cmd_per_lun = ints[2]; 179 } 180 if (ints[0] >= 3) { 181 if (ints[3] >= 0) { 182 setup_sg_tablesize = ints[3]; 183 /* Must be <= SG_ALL (255) */ 184 if (setup_sg_tablesize > SG_ALL) 185 setup_sg_tablesize = SG_ALL; 186 } 187 } 188 if (ints[0] >= 4) { 189 /* Must be between 0 and 7 */ 190 if (ints[4] >= 0 && ints[4] <= 7) 191 setup_hostid = ints[4]; 192 else if (ints[4] > 7) 193 printk(KERN_WARNING "mac_scsi_setup: invalid host ID %d !\n", ints[4] ); 194 } 195 #ifdef SUPPORT_TAGS 196 if (ints[0] >= 5) { 197 if (ints[5] >= 0) 198 setup_use_tagged_queuing = !!ints[5]; 199 } 200 201 if (ints[0] == 6) { 202 if (ints[6] >= 0) 203 setup_use_pdma = ints[6]; 204 } 205 #else 206 if (ints[0] == 5) { 207 if (ints[5] >= 0) 208 setup_use_pdma = ints[5]; 209 } 210 #endif /* SUPPORT_TAGS */ 211 212 #endif /* DRIVER_SETUP */ 213 return 1; 214 } 215 216 __setup("mac5380=", mac_scsi_setup); 217 218 /* 219 * If you want to find the instance with (k)gdb ... 220 */ 221 #if NDEBUG 222 static struct Scsi_Host *default_instance; 223 #endif 224 225 /* 226 * Function : int macscsi_detect(struct scsi_host_template * tpnt) 227 * 228 * Purpose : initializes mac NCR5380 driver based on the 229 * command line / compile time port and irq definitions. 230 * 231 * Inputs : tpnt - template for this SCSI adapter. 232 * 233 * Returns : 1 if a host adapter was found, 0 if not. 234 * 235 */ 236 237 int macscsi_detect(struct scsi_host_template * tpnt) 238 { 239 static int called = 0; 240 int flags = 0; 241 struct Scsi_Host *instance; 242 243 if (!MACH_IS_MAC || called) 244 return( 0 ); 245 246 if (macintosh_config->scsi_type != MAC_SCSI_OLD) 247 return( 0 ); 248 249 /* setup variables */ 250 tpnt->can_queue = 251 (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE; 252 tpnt->cmd_per_lun = 253 (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN; 254 tpnt->sg_tablesize = 255 (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE; 256 257 if (setup_hostid >= 0) 258 tpnt->this_id = setup_hostid; 259 else { 260 /* use 7 as default */ 261 tpnt->this_id = 7; 262 } 263 264 #ifdef SUPPORT_TAGS 265 if (setup_use_tagged_queuing < 0) 266 setup_use_tagged_queuing = USE_TAGGED_QUEUING; 267 #endif 268 269 /* Once we support multiple 5380s (e.g. DuoDock) we'll do 270 something different here */ 271 instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata)); 272 #if NDEBUG 273 default_instance = instance; 274 #endif 275 276 if (macintosh_config->ident == MAC_MODEL_IIFX) { 277 mac_scsi_regp = via1+0x8000; 278 mac_scsi_drq = via1+0xE000; 279 mac_scsi_nodrq = via1+0xC000; 280 /* The IIFX should be able to do true DMA, but pseudo-dma doesn't work */ 281 flags = FLAG_NO_PSEUDO_DMA; 282 } else { 283 mac_scsi_regp = via1+0x10000; 284 mac_scsi_drq = via1+0x6000; 285 mac_scsi_nodrq = via1+0x12000; 286 } 287 288 if (! setup_use_pdma) 289 flags = FLAG_NO_PSEUDO_DMA; 290 291 instance->io_port = (unsigned long) mac_scsi_regp; 292 instance->irq = IRQ_MAC_SCSI; 293 294 #ifdef RESET_BOOT 295 mac_scsi_reset_boot(instance); 296 #endif 297 298 NCR5380_init(instance, flags); 299 300 instance->n_io_port = 255; 301 302 ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0; 303 304 if (instance->irq != SCSI_IRQ_NONE) 305 if (request_irq(instance->irq, NCR5380_intr, IRQ_FLG_SLOW, 306 "ncr5380", instance)) { 307 printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n", 308 instance->host_no, instance->irq); 309 instance->irq = SCSI_IRQ_NONE; 310 } 311 312 printk(KERN_INFO "scsi%d: generic 5380 at port %lX irq", instance->host_no, instance->io_port); 313 if (instance->irq == SCSI_IRQ_NONE) 314 printk (KERN_INFO "s disabled"); 315 else 316 printk (KERN_INFO " %d", instance->irq); 317 printk(KERN_INFO " options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", 318 instance->can_queue, instance->cmd_per_lun, MACSCSI_PUBLIC_RELEASE); 319 printk(KERN_INFO "\nscsi%d:", instance->host_no); 320 NCR5380_print_options(instance); 321 printk("\n"); 322 called = 1; 323 return 1; 324 } 325 326 int macscsi_release (struct Scsi_Host *shpnt) 327 { 328 if (shpnt->irq != SCSI_IRQ_NONE) 329 free_irq(shpnt->irq, shpnt); 330 NCR5380_exit(shpnt); 331 332 return 0; 333 } 334 335 #ifdef RESET_BOOT 336 /* 337 * Our 'bus reset on boot' function 338 */ 339 340 static void mac_scsi_reset_boot(struct Scsi_Host *instance) 341 { 342 unsigned long end; 343 344 NCR5380_local_declare(); 345 NCR5380_setup(instance); 346 347 /* 348 * Do a SCSI reset to clean up the bus during initialization. No messing 349 * with the queues, interrupts, or locks necessary here. 350 */ 351 352 printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." ); 353 354 /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */ 355 disable_irq(IRQ_MAC_SCSI); 356 357 /* get in phase */ 358 NCR5380_write( TARGET_COMMAND_REG, 359 PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) )); 360 361 /* assert RST */ 362 NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST ); 363 /* The min. reset hold time is 25us, so 40us should be enough */ 364 udelay( 50 ); 365 /* reset RST and interrupt */ 366 NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE ); 367 NCR5380_read( RESET_PARITY_INTERRUPT_REG ); 368 369 for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); ) 370 barrier(); 371 372 /* switch on SCSI IRQ again */ 373 enable_irq(IRQ_MAC_SCSI); 374 375 printk(KERN_INFO " done\n" ); 376 } 377 #endif 378 379 const char * macscsi_info (struct Scsi_Host *spnt) { 380 return ""; 381 } 382 383 /* 384 Pseudo-DMA: (Ove Edlund) 385 The code attempts to catch bus errors that occur if one for example 386 "trips over the cable". 387 XXX: Since bus errors in the PDMA routines never happen on my 388 computer, the bus error code is untested. 389 If the code works as intended, a bus error results in Pseudo-DMA 390 beeing disabled, meaning that the driver switches to slow handshake. 391 If bus errors are NOT extremely rare, this has to be changed. 392 */ 393 394 #define CP_IO_TO_MEM(s,d,len) \ 395 __asm__ __volatile__ \ 396 (" cmp.w #4,%2\n" \ 397 " bls 8f\n" \ 398 " move.w %1,%%d0\n" \ 399 " neg.b %%d0\n" \ 400 " and.w #3,%%d0\n" \ 401 " sub.w %%d0,%2\n" \ 402 " bra 2f\n" \ 403 " 1: move.b (%0),(%1)+\n" \ 404 " 2: dbf %%d0,1b\n" \ 405 " move.w %2,%%d0\n" \ 406 " lsr.w #5,%%d0\n" \ 407 " bra 4f\n" \ 408 " 3: move.l (%0),(%1)+\n" \ 409 "31: move.l (%0),(%1)+\n" \ 410 "32: move.l (%0),(%1)+\n" \ 411 "33: move.l (%0),(%1)+\n" \ 412 "34: move.l (%0),(%1)+\n" \ 413 "35: move.l (%0),(%1)+\n" \ 414 "36: move.l (%0),(%1)+\n" \ 415 "37: move.l (%0),(%1)+\n" \ 416 " 4: dbf %%d0,3b\n" \ 417 " move.w %2,%%d0\n" \ 418 " lsr.w #2,%%d0\n" \ 419 " and.w #7,%%d0\n" \ 420 " bra 6f\n" \ 421 " 5: move.l (%0),(%1)+\n" \ 422 " 6: dbf %%d0,5b\n" \ 423 " and.w #3,%2\n" \ 424 " bra 8f\n" \ 425 " 7: move.b (%0),(%1)+\n" \ 426 " 8: dbf %2,7b\n" \ 427 " moveq.l #0, %2\n" \ 428 " 9: \n" \ 429 ".section .fixup,\"ax\"\n" \ 430 " .even\n" \ 431 "90: moveq.l #1, %2\n" \ 432 " jra 9b\n" \ 433 ".previous\n" \ 434 ".section __ex_table,\"a\"\n" \ 435 " .align 4\n" \ 436 " .long 1b,90b\n" \ 437 " .long 3b,90b\n" \ 438 " .long 31b,90b\n" \ 439 " .long 32b,90b\n" \ 440 " .long 33b,90b\n" \ 441 " .long 34b,90b\n" \ 442 " .long 35b,90b\n" \ 443 " .long 36b,90b\n" \ 444 " .long 37b,90b\n" \ 445 " .long 5b,90b\n" \ 446 " .long 7b,90b\n" \ 447 ".previous" \ 448 : "=a"(s), "=a"(d), "=d"(len) \ 449 : "0"(s), "1"(d), "2"(len) \ 450 : "d0") 451 452 453 static int macscsi_pread (struct Scsi_Host *instance, 454 unsigned char *dst, int len) 455 { 456 unsigned char *d; 457 volatile unsigned char *s; 458 459 NCR5380_local_declare(); 460 NCR5380_setup(instance); 461 462 s = mac_scsi_drq+0x60; 463 d = dst; 464 465 /* These conditions are derived from MacOS */ 466 467 while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) 468 && !(NCR5380_read(STATUS_REG) & SR_REQ)) 469 ; 470 if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) 471 && (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) { 472 printk(KERN_ERR "Error in macscsi_pread\n"); 473 return -1; 474 } 475 476 CP_IO_TO_MEM(s, d, len); 477 478 if (len != 0) { 479 printk(KERN_NOTICE "Bus error in macscsi_pread\n"); 480 return -1; 481 } 482 483 return 0; 484 } 485 486 487 #define CP_MEM_TO_IO(s,d,len) \ 488 __asm__ __volatile__ \ 489 (" cmp.w #4,%2\n" \ 490 " bls 8f\n" \ 491 " move.w %0,%%d0\n" \ 492 " neg.b %%d0\n" \ 493 " and.w #3,%%d0\n" \ 494 " sub.w %%d0,%2\n" \ 495 " bra 2f\n" \ 496 " 1: move.b (%0)+,(%1)\n" \ 497 " 2: dbf %%d0,1b\n" \ 498 " move.w %2,%%d0\n" \ 499 " lsr.w #5,%%d0\n" \ 500 " bra 4f\n" \ 501 " 3: move.l (%0)+,(%1)\n" \ 502 "31: move.l (%0)+,(%1)\n" \ 503 "32: move.l (%0)+,(%1)\n" \ 504 "33: move.l (%0)+,(%1)\n" \ 505 "34: move.l (%0)+,(%1)\n" \ 506 "35: move.l (%0)+,(%1)\n" \ 507 "36: move.l (%0)+,(%1)\n" \ 508 "37: move.l (%0)+,(%1)\n" \ 509 " 4: dbf %%d0,3b\n" \ 510 " move.w %2,%%d0\n" \ 511 " lsr.w #2,%%d0\n" \ 512 " and.w #7,%%d0\n" \ 513 " bra 6f\n" \ 514 " 5: move.l (%0)+,(%1)\n" \ 515 " 6: dbf %%d0,5b\n" \ 516 " and.w #3,%2\n" \ 517 " bra 8f\n" \ 518 " 7: move.b (%0)+,(%1)\n" \ 519 " 8: dbf %2,7b\n" \ 520 " moveq.l #0, %2\n" \ 521 " 9: \n" \ 522 ".section .fixup,\"ax\"\n" \ 523 " .even\n" \ 524 "90: moveq.l #1, %2\n" \ 525 " jra 9b\n" \ 526 ".previous\n" \ 527 ".section __ex_table,\"a\"\n" \ 528 " .align 4\n" \ 529 " .long 1b,90b\n" \ 530 " .long 3b,90b\n" \ 531 " .long 31b,90b\n" \ 532 " .long 32b,90b\n" \ 533 " .long 33b,90b\n" \ 534 " .long 34b,90b\n" \ 535 " .long 35b,90b\n" \ 536 " .long 36b,90b\n" \ 537 " .long 37b,90b\n" \ 538 " .long 5b,90b\n" \ 539 " .long 7b,90b\n" \ 540 ".previous" \ 541 : "=a"(s), "=a"(d), "=d"(len) \ 542 : "0"(s), "1"(d), "2"(len) \ 543 : "d0") 544 545 static int macscsi_pwrite (struct Scsi_Host *instance, 546 unsigned char *src, int len) 547 { 548 unsigned char *s; 549 volatile unsigned char *d; 550 551 NCR5380_local_declare(); 552 NCR5380_setup(instance); 553 554 s = src; 555 d = mac_scsi_drq; 556 557 /* These conditions are derived from MacOS */ 558 559 while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) 560 && (!(NCR5380_read(STATUS_REG) & SR_REQ) 561 || (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))) 562 ; 563 if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) { 564 printk(KERN_ERR "Error in macscsi_pwrite\n"); 565 return -1; 566 } 567 568 CP_MEM_TO_IO(s, d, len); 569 570 if (len != 0) { 571 printk(KERN_NOTICE "Bus error in macscsi_pwrite\n"); 572 return -1; 573 } 574 575 return 0; 576 } 577 578 579 #include "NCR5380.c" 580 581 static struct scsi_host_template driver_template = { 582 .proc_name = "Mac5380", 583 .proc_info = macscsi_proc_info, 584 .name = "Macintosh NCR5380 SCSI", 585 .detect = macscsi_detect, 586 .release = macscsi_release, 587 .info = macscsi_info, 588 .queuecommand = macscsi_queue_command, 589 .eh_abort_handler = macscsi_abort, 590 .eh_bus_reset_handler = macscsi_bus_reset, 591 .can_queue = CAN_QUEUE, 592 .this_id = 7, 593 .sg_tablesize = SG_ALL, 594 .cmd_per_lun = CMD_PER_LUN, 595 .use_clustering = DISABLE_CLUSTERING 596 }; 597 598 599 #include "scsi_module.c" 600