xref: /openbmc/linux/drivers/scsi/mac53c94.c (revision df0e68c1)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * SCSI low-level driver for the 53c94 SCSI bus adaptor found
4  * on Power Macintosh computers, controlling the external SCSI chain.
5  * We assume the 53c94 is connected to a DBDMA (descriptor-based DMA)
6  * controller.
7  *
8  * Paul Mackerras, August 1996.
9  * Copyright (C) 1996 Paul Mackerras.
10  */
11 #include <linux/kernel.h>
12 #include <linux/delay.h>
13 #include <linux/types.h>
14 #include <linux/string.h>
15 #include <linux/slab.h>
16 #include <linux/blkdev.h>
17 #include <linux/proc_fs.h>
18 #include <linux/stat.h>
19 #include <linux/spinlock.h>
20 #include <linux/interrupt.h>
21 #include <linux/module.h>
22 #include <linux/pci.h>
23 #include <linux/pgtable.h>
24 #include <asm/dbdma.h>
25 #include <asm/io.h>
26 #include <asm/prom.h>
27 #include <asm/macio.h>
28 
29 #include <scsi/scsi.h>
30 #include <scsi/scsi_cmnd.h>
31 #include <scsi/scsi_device.h>
32 #include <scsi/scsi_host.h>
33 
34 #include "mac53c94.h"
35 
36 enum fsc_phase {
37 	idle,
38 	selecting,
39 	dataing,
40 	completing,
41 	busfreeing,
42 };
43 
44 struct fsc_state {
45 	struct	mac53c94_regs __iomem *regs;
46 	int	intr;
47 	struct	dbdma_regs __iomem *dma;
48 	int	dmaintr;
49 	int	clk_freq;
50 	struct	Scsi_Host *host;
51 	struct scsi_cmnd *request_q;
52 	struct scsi_cmnd *request_qtail;
53 	struct scsi_cmnd *current_req;		/* req we're currently working on */
54 	enum fsc_phase phase;		/* what we're currently trying to do */
55 	struct dbdma_cmd *dma_cmds;	/* space for dbdma commands, aligned */
56 	void	*dma_cmd_space;
57 	struct	pci_dev *pdev;
58 	dma_addr_t dma_addr;
59 	struct macio_dev *mdev;
60 };
61 
62 static void mac53c94_init(struct fsc_state *);
63 static void mac53c94_start(struct fsc_state *);
64 static void mac53c94_interrupt(int, void *);
65 static irqreturn_t do_mac53c94_interrupt(int, void *);
66 static void cmd_done(struct fsc_state *, int result);
67 static void set_dma_cmds(struct fsc_state *, struct scsi_cmnd *);
68 
69 static int mac53c94_queue_lck(struct scsi_cmnd *cmd)
70 {
71 	struct fsc_state *state;
72 
73 #if 0
74 	if (cmd->sc_data_direction == DMA_TO_DEVICE) {
75 		int i;
76 		printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd);
77 		for (i = 0; i < cmd->cmd_len; ++i)
78 			printk(KERN_CONT " %.2x", cmd->cmnd[i]);
79 		printk(KERN_CONT "\n");
80 		printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
81 		       scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd));
82 	}
83 #endif
84 
85 	cmd->host_scribble = NULL;
86 
87 	state = (struct fsc_state *) cmd->device->host->hostdata;
88 
89 	if (state->request_q == NULL)
90 		state->request_q = cmd;
91 	else
92 		state->request_qtail->host_scribble = (void *) cmd;
93 	state->request_qtail = cmd;
94 
95 	if (state->phase == idle)
96 		mac53c94_start(state);
97 
98 	return 0;
99 }
100 
101 static DEF_SCSI_QCMD(mac53c94_queue)
102 
103 static int mac53c94_host_reset(struct scsi_cmnd *cmd)
104 {
105 	struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata;
106 	struct mac53c94_regs __iomem *regs = state->regs;
107 	struct dbdma_regs __iomem *dma = state->dma;
108 	unsigned long flags;
109 
110 	spin_lock_irqsave(cmd->device->host->host_lock, flags);
111 
112 	writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control);
113 	writeb(CMD_SCSI_RESET, &regs->command);	/* assert RST */
114 	udelay(100);			/* leave it on for a while (>= 25us) */
115 	writeb(CMD_RESET, &regs->command);
116 	udelay(20);
117 	mac53c94_init(state);
118 	writeb(CMD_NOP, &regs->command);
119 
120 	spin_unlock_irqrestore(cmd->device->host->host_lock, flags);
121 	return SUCCESS;
122 }
123 
124 static void mac53c94_init(struct fsc_state *state)
125 {
126 	struct mac53c94_regs __iomem *regs = state->regs;
127 	struct dbdma_regs __iomem *dma = state->dma;
128 	int x;
129 
130 	writeb(state->host->this_id | CF1_PAR_ENABLE, &regs->config1);
131 	writeb(TIMO_VAL(250), &regs->sel_timeout);	/* 250ms */
132 	writeb(CLKF_VAL(state->clk_freq), &regs->clk_factor);
133 	writeb(CF2_FEATURE_EN, &regs->config2);
134 	writeb(0, &regs->config3);
135 	writeb(0, &regs->sync_period);
136 	writeb(0, &regs->sync_offset);
137 	x = readb(&regs->interrupt);
138 	writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control);
139 }
140 
141 /*
142  * Start the next command for a 53C94.
143  * Should be called with interrupts disabled.
144  */
145 static void mac53c94_start(struct fsc_state *state)
146 {
147 	struct scsi_cmnd *cmd;
148 	struct mac53c94_regs __iomem *regs = state->regs;
149 	int i;
150 
151 	if (state->phase != idle || state->current_req != NULL)
152 		panic("inappropriate mac53c94_start (state=%p)", state);
153 	if (state->request_q == NULL)
154 		return;
155 	state->current_req = cmd = state->request_q;
156 	state->request_q = (struct scsi_cmnd *) cmd->host_scribble;
157 
158 	/* Off we go */
159 	writeb(0, &regs->count_lo);
160 	writeb(0, &regs->count_mid);
161 	writeb(0, &regs->count_hi);
162 	writeb(CMD_NOP + CMD_DMA_MODE, &regs->command);
163 	udelay(1);
164 	writeb(CMD_FLUSH, &regs->command);
165 	udelay(1);
166 	writeb(cmd->device->id, &regs->dest_id);
167 	writeb(0, &regs->sync_period);
168 	writeb(0, &regs->sync_offset);
169 
170 	/* load the command into the FIFO */
171 	for (i = 0; i < cmd->cmd_len; ++i)
172 		writeb(cmd->cmnd[i], &regs->fifo);
173 
174 	/* do select without ATN XXX */
175 	writeb(CMD_SELECT, &regs->command);
176 	state->phase = selecting;
177 
178 	set_dma_cmds(state, cmd);
179 }
180 
181 static irqreturn_t do_mac53c94_interrupt(int irq, void *dev_id)
182 {
183 	unsigned long flags;
184 	struct Scsi_Host *dev = ((struct fsc_state *) dev_id)->current_req->device->host;
185 
186 	spin_lock_irqsave(dev->host_lock, flags);
187 	mac53c94_interrupt(irq, dev_id);
188 	spin_unlock_irqrestore(dev->host_lock, flags);
189 	return IRQ_HANDLED;
190 }
191 
192 static void mac53c94_interrupt(int irq, void *dev_id)
193 {
194 	struct fsc_state *state = (struct fsc_state *) dev_id;
195 	struct mac53c94_regs __iomem *regs = state->regs;
196 	struct dbdma_regs __iomem *dma = state->dma;
197 	struct scsi_cmnd *cmd = state->current_req;
198 	int nb, stat, seq, intr;
199 	static int mac53c94_errors;
200 
201 	/*
202 	 * Apparently, reading the interrupt register unlatches
203 	 * the status and sequence step registers.
204 	 */
205 	seq = readb(&regs->seqstep);
206 	stat = readb(&regs->status);
207 	intr = readb(&regs->interrupt);
208 
209 #if 0
210 	printk(KERN_DEBUG "mac53c94_intr, intr=%x stat=%x seq=%x phase=%d\n",
211 	       intr, stat, seq, state->phase);
212 #endif
213 
214 	if (intr & INTR_RESET) {
215 		/* SCSI bus was reset */
216 		printk(KERN_INFO "external SCSI bus reset detected\n");
217 		writeb(CMD_NOP, &regs->command);
218 		writel(RUN << 16, &dma->control);	/* stop dma */
219 		cmd_done(state, DID_RESET << 16);
220 		return;
221 	}
222 	if (intr & INTR_ILL_CMD) {
223 		printk(KERN_ERR "53c94: invalid cmd, intr=%x stat=%x seq=%x phase=%d\n",
224 		       intr, stat, seq, state->phase);
225 		cmd_done(state, DID_ERROR << 16);
226 		return;
227 	}
228 	if (stat & STAT_ERROR) {
229 #if 0
230 		/* XXX these seem to be harmless? */
231 		printk("53c94: bad error, intr=%x stat=%x seq=%x phase=%d\n",
232 		       intr, stat, seq, state->phase);
233 #endif
234 		++mac53c94_errors;
235 		writeb(CMD_NOP + CMD_DMA_MODE, &regs->command);
236 	}
237 	if (cmd == 0) {
238 		printk(KERN_DEBUG "53c94: interrupt with no command active?\n");
239 		return;
240 	}
241 	if (stat & STAT_PARITY) {
242 		printk(KERN_ERR "mac53c94: parity error\n");
243 		cmd_done(state, DID_PARITY << 16);
244 		return;
245 	}
246 	switch (state->phase) {
247 	case selecting:
248 		if (intr & INTR_DISCONNECT) {
249 			/* selection timed out */
250 			cmd_done(state, DID_BAD_TARGET << 16);
251 			return;
252 		}
253 		if (intr != INTR_BUS_SERV + INTR_DONE) {
254 			printk(KERN_DEBUG "got intr %x during selection\n", intr);
255 			cmd_done(state, DID_ERROR << 16);
256 			return;
257 		}
258 		if ((seq & SS_MASK) != SS_DONE) {
259 			printk(KERN_DEBUG "seq step %x after command\n", seq);
260 			cmd_done(state, DID_ERROR << 16);
261 			return;
262 		}
263 		writeb(CMD_NOP, &regs->command);
264 		/* set DMA controller going if any data to transfer */
265 		if ((stat & (STAT_MSG|STAT_CD)) == 0
266 		    && (scsi_sg_count(cmd) > 0 || scsi_bufflen(cmd))) {
267 			nb = cmd->SCp.this_residual;
268 			if (nb > 0xfff0)
269 				nb = 0xfff0;
270 			cmd->SCp.this_residual -= nb;
271 			writeb(nb, &regs->count_lo);
272 			writeb(nb >> 8, &regs->count_mid);
273 			writeb(CMD_DMA_MODE + CMD_NOP, &regs->command);
274 			writel(virt_to_phys(state->dma_cmds), &dma->cmdptr);
275 			writel((RUN << 16) | RUN, &dma->control);
276 			writeb(CMD_DMA_MODE + CMD_XFER_DATA, &regs->command);
277 			state->phase = dataing;
278 			break;
279 		} else if ((stat & STAT_PHASE) == STAT_CD + STAT_IO) {
280 			/* up to status phase already */
281 			writeb(CMD_I_COMPLETE, &regs->command);
282 			state->phase = completing;
283 		} else {
284 			printk(KERN_DEBUG "in unexpected phase %x after cmd\n",
285 			       stat & STAT_PHASE);
286 			cmd_done(state, DID_ERROR << 16);
287 			return;
288 		}
289 		break;
290 
291 	case dataing:
292 		if (intr != INTR_BUS_SERV) {
293 			printk(KERN_DEBUG "got intr %x before status\n", intr);
294 			cmd_done(state, DID_ERROR << 16);
295 			return;
296 		}
297 		if (cmd->SCp.this_residual != 0
298 		    && (stat & (STAT_MSG|STAT_CD)) == 0) {
299 			/* Set up the count regs to transfer more */
300 			nb = cmd->SCp.this_residual;
301 			if (nb > 0xfff0)
302 				nb = 0xfff0;
303 			cmd->SCp.this_residual -= nb;
304 			writeb(nb, &regs->count_lo);
305 			writeb(nb >> 8, &regs->count_mid);
306 			writeb(CMD_DMA_MODE + CMD_NOP, &regs->command);
307 			writeb(CMD_DMA_MODE + CMD_XFER_DATA, &regs->command);
308 			break;
309 		}
310 		if ((stat & STAT_PHASE) != STAT_CD + STAT_IO) {
311 			printk(KERN_DEBUG "intr %x before data xfer complete\n", intr);
312 		}
313 		writel(RUN << 16, &dma->control);	/* stop dma */
314 		scsi_dma_unmap(cmd);
315 		/* should check dma status */
316 		writeb(CMD_I_COMPLETE, &regs->command);
317 		state->phase = completing;
318 		break;
319 	case completing:
320 		if (intr != INTR_DONE) {
321 			printk(KERN_DEBUG "got intr %x on completion\n", intr);
322 			cmd_done(state, DID_ERROR << 16);
323 			return;
324 		}
325 		cmd->SCp.Status = readb(&regs->fifo);
326 		cmd->SCp.Message = readb(&regs->fifo);
327 		writeb(CMD_ACCEPT_MSG, &regs->command);
328 		state->phase = busfreeing;
329 		break;
330 	case busfreeing:
331 		if (intr != INTR_DISCONNECT) {
332 			printk(KERN_DEBUG "got intr %x when expected disconnect\n", intr);
333 		}
334 		cmd_done(state, (DID_OK << 16) + (cmd->SCp.Message << 8)
335 			 + cmd->SCp.Status);
336 		break;
337 	default:
338 		printk(KERN_DEBUG "don't know about phase %d\n", state->phase);
339 	}
340 }
341 
342 static void cmd_done(struct fsc_state *state, int result)
343 {
344 	struct scsi_cmnd *cmd;
345 
346 	cmd = state->current_req;
347 	if (cmd) {
348 		cmd->result = result;
349 		scsi_done(cmd);
350 		state->current_req = NULL;
351 	}
352 	state->phase = idle;
353 	mac53c94_start(state);
354 }
355 
356 /*
357  * Set up DMA commands for transferring data.
358  */
359 static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd)
360 {
361 	int i, dma_cmd, total, nseg;
362 	struct scatterlist *scl;
363 	struct dbdma_cmd *dcmds;
364 	dma_addr_t dma_addr;
365 	u32 dma_len;
366 
367 	nseg = scsi_dma_map(cmd);
368 	BUG_ON(nseg < 0);
369 	if (!nseg)
370 		return;
371 
372 	dma_cmd = cmd->sc_data_direction == DMA_TO_DEVICE ?
373 			OUTPUT_MORE : INPUT_MORE;
374 	dcmds = state->dma_cmds;
375 	total = 0;
376 
377 	scsi_for_each_sg(cmd, scl, nseg, i) {
378 		dma_addr = sg_dma_address(scl);
379 		dma_len = sg_dma_len(scl);
380 		if (dma_len > 0xffff)
381 			panic("mac53c94: scatterlist element >= 64k");
382 		total += dma_len;
383 		dcmds->req_count = cpu_to_le16(dma_len);
384 		dcmds->command = cpu_to_le16(dma_cmd);
385 		dcmds->phy_addr = cpu_to_le32(dma_addr);
386 		dcmds->xfer_status = 0;
387 		++dcmds;
388 	}
389 
390 	dma_cmd += OUTPUT_LAST - OUTPUT_MORE;
391 	dcmds[-1].command = cpu_to_le16(dma_cmd);
392 	dcmds->command = cpu_to_le16(DBDMA_STOP);
393 	cmd->SCp.this_residual = total;
394 }
395 
396 static struct scsi_host_template mac53c94_template = {
397 	.proc_name	= "53c94",
398 	.name		= "53C94",
399 	.queuecommand	= mac53c94_queue,
400 	.eh_host_reset_handler = mac53c94_host_reset,
401 	.can_queue	= 1,
402 	.this_id	= 7,
403 	.sg_tablesize	= SG_ALL,
404 	.max_segment_size = 65535,
405 };
406 
407 static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *match)
408 {
409 	struct device_node *node = macio_get_of_node(mdev);
410 	struct pci_dev *pdev = macio_get_pci_dev(mdev);
411 	struct fsc_state *state;
412 	struct Scsi_Host *host;
413 	void *dma_cmd_space;
414 	const unsigned char *clkprop;
415 	int proplen, rc = -ENODEV;
416 
417 	if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) {
418 		printk(KERN_ERR "mac53c94: expected 2 addrs and intrs"
419 		       " (got %d/%d)\n",
420 		       macio_resource_count(mdev), macio_irq_count(mdev));
421 		return -ENODEV;
422 	}
423 
424 	if (macio_request_resources(mdev, "mac53c94") != 0) {
425        		printk(KERN_ERR "mac53c94: unable to request memory resources");
426 		return -EBUSY;
427 	}
428 
429        	host = scsi_host_alloc(&mac53c94_template, sizeof(struct fsc_state));
430 	if (host == NULL) {
431 		printk(KERN_ERR "mac53c94: couldn't register host");
432 		rc = -ENOMEM;
433 		goto out_release;
434 	}
435 
436 	state = (struct fsc_state *) host->hostdata;
437 	macio_set_drvdata(mdev, state);
438 	state->host = host;
439 	state->pdev = pdev;
440 	state->mdev = mdev;
441 
442 	state->regs = (struct mac53c94_regs __iomem *)
443 		ioremap(macio_resource_start(mdev, 0), 0x1000);
444 	state->intr = macio_irq(mdev, 0);
445 	state->dma = (struct dbdma_regs __iomem *)
446 		ioremap(macio_resource_start(mdev, 1), 0x1000);
447 	state->dmaintr = macio_irq(mdev, 1);
448 	if (state->regs == NULL || state->dma == NULL) {
449 		printk(KERN_ERR "mac53c94: ioremap failed for %pOF\n", node);
450 		goto out_free;
451 	}
452 
453 	clkprop = of_get_property(node, "clock-frequency", &proplen);
454        	if (clkprop == NULL || proplen != sizeof(int)) {
455        		printk(KERN_ERR "%pOF: can't get clock frequency, "
456        		       "assuming 25MHz\n", node);
457        		state->clk_freq = 25000000;
458        	} else
459        		state->clk_freq = *(int *)clkprop;
460 
461        	/* Space for dma command list: +1 for stop command,
462        	 * +1 to allow for aligning.
463 	 * XXX FIXME: Use DMA consistent routines
464 	 */
465        	dma_cmd_space = kmalloc_array(host->sg_tablesize + 2,
466 					     sizeof(struct dbdma_cmd),
467 					     GFP_KERNEL);
468 	if (!dma_cmd_space) {
469 		printk(KERN_ERR "mac53c94: couldn't allocate dma "
470 		       "command space for %pOF\n", node);
471 		rc = -ENOMEM;
472 		goto out_free;
473 	}
474 
475 	state->dma_cmds = (struct dbdma_cmd *)DBDMA_ALIGN(dma_cmd_space);
476 	memset(state->dma_cmds, 0, (host->sg_tablesize + 1)
477 	       * sizeof(struct dbdma_cmd));
478 	state->dma_cmd_space = dma_cmd_space;
479 
480 	mac53c94_init(state);
481 
482 	if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94",state)) {
483 		printk(KERN_ERR "mac53C94: can't get irq %d for %pOF\n",
484 		       state->intr, node);
485 		goto out_free_dma;
486 	}
487 
488 	rc = scsi_add_host(host, &mdev->ofdev.dev);
489 	if (rc != 0)
490 		goto out_release_irq;
491 
492 	scsi_scan_host(host);
493 	return 0;
494 
495  out_release_irq:
496 	free_irq(state->intr, state);
497  out_free_dma:
498 	kfree(state->dma_cmd_space);
499  out_free:
500 	if (state->dma != NULL)
501 		iounmap(state->dma);
502 	if (state->regs != NULL)
503 		iounmap(state->regs);
504 	scsi_host_put(host);
505  out_release:
506 	macio_release_resources(mdev);
507 
508 	return rc;
509 }
510 
511 static int mac53c94_remove(struct macio_dev *mdev)
512 {
513 	struct fsc_state *fp = (struct fsc_state *)macio_get_drvdata(mdev);
514 	struct Scsi_Host *host = fp->host;
515 
516 	scsi_remove_host(host);
517 
518 	free_irq(fp->intr, fp);
519 
520 	if (fp->regs)
521 		iounmap(fp->regs);
522 	if (fp->dma)
523 		iounmap(fp->dma);
524 	kfree(fp->dma_cmd_space);
525 
526 	scsi_host_put(host);
527 
528 	macio_release_resources(mdev);
529 
530 	return 0;
531 }
532 
533 
534 static struct of_device_id mac53c94_match[] =
535 {
536 	{
537 	.name 		= "53c94",
538 	},
539 	{},
540 };
541 MODULE_DEVICE_TABLE (of, mac53c94_match);
542 
543 static struct macio_driver mac53c94_driver =
544 {
545 	.driver = {
546 		.name 		= "mac53c94",
547 		.owner		= THIS_MODULE,
548 		.of_match_table	= mac53c94_match,
549 	},
550 	.probe		= mac53c94_probe,
551 	.remove		= mac53c94_remove,
552 };
553 
554 
555 static int __init init_mac53c94(void)
556 {
557 	return macio_register_driver(&mac53c94_driver);
558 }
559 
560 static void __exit exit_mac53c94(void)
561 {
562 	return macio_unregister_driver(&mac53c94_driver);
563 }
564 
565 module_init(init_mac53c94);
566 module_exit(exit_mac53c94);
567 
568 MODULE_DESCRIPTION("PowerMac 53c94 SCSI driver");
569 MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
570 MODULE_LICENSE("GPL");
571