1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * SCSI low-level driver for the 53c94 SCSI bus adaptor found
4 * on Power Macintosh computers, controlling the external SCSI chain.
5 * We assume the 53c94 is connected to a DBDMA (descriptor-based DMA)
6 * controller.
7 *
8 * Paul Mackerras, August 1996.
9 * Copyright (C) 1996 Paul Mackerras.
10 */
11 #include <linux/kernel.h>
12 #include <linux/delay.h>
13 #include <linux/types.h>
14 #include <linux/string.h>
15 #include <linux/slab.h>
16 #include <linux/blkdev.h>
17 #include <linux/proc_fs.h>
18 #include <linux/stat.h>
19 #include <linux/spinlock.h>
20 #include <linux/interrupt.h>
21 #include <linux/module.h>
22 #include <linux/pci.h>
23 #include <linux/pgtable.h>
24 #include <asm/dbdma.h>
25 #include <asm/io.h>
26 #include <asm/prom.h>
27 #include <asm/macio.h>
28
29 #include <scsi/scsi.h>
30 #include <scsi/scsi_cmnd.h>
31 #include <scsi/scsi_device.h>
32 #include <scsi/scsi_host.h>
33
34 #include "mac53c94.h"
35
36 enum fsc_phase {
37 idle,
38 selecting,
39 dataing,
40 completing,
41 busfreeing,
42 };
43
44 struct fsc_state {
45 struct mac53c94_regs __iomem *regs;
46 int intr;
47 struct dbdma_regs __iomem *dma;
48 int dmaintr;
49 int clk_freq;
50 struct Scsi_Host *host;
51 struct scsi_cmnd *request_q;
52 struct scsi_cmnd *request_qtail;
53 struct scsi_cmnd *current_req; /* req we're currently working on */
54 enum fsc_phase phase; /* what we're currently trying to do */
55 struct dbdma_cmd *dma_cmds; /* space for dbdma commands, aligned */
56 void *dma_cmd_space;
57 struct pci_dev *pdev;
58 dma_addr_t dma_addr;
59 struct macio_dev *mdev;
60 };
61
62 static void mac53c94_init(struct fsc_state *);
63 static void mac53c94_start(struct fsc_state *);
64 static void mac53c94_interrupt(int, void *);
65 static irqreturn_t do_mac53c94_interrupt(int, void *);
66 static void cmd_done(struct fsc_state *, int result);
67 static void set_dma_cmds(struct fsc_state *, struct scsi_cmnd *);
68
mac53c94_queue_lck(struct scsi_cmnd * cmd)69 static int mac53c94_queue_lck(struct scsi_cmnd *cmd)
70 {
71 struct fsc_state *state;
72
73 #if 0
74 if (cmd->sc_data_direction == DMA_TO_DEVICE) {
75 int i;
76 printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd);
77 for (i = 0; i < cmd->cmd_len; ++i)
78 printk(KERN_CONT " %.2x", cmd->cmnd[i]);
79 printk(KERN_CONT "\n");
80 printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
81 scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd));
82 }
83 #endif
84
85 cmd->host_scribble = NULL;
86
87 state = (struct fsc_state *) cmd->device->host->hostdata;
88
89 if (state->request_q == NULL)
90 state->request_q = cmd;
91 else
92 state->request_qtail->host_scribble = (void *) cmd;
93 state->request_qtail = cmd;
94
95 if (state->phase == idle)
96 mac53c94_start(state);
97
98 return 0;
99 }
100
DEF_SCSI_QCMD(mac53c94_queue)101 static DEF_SCSI_QCMD(mac53c94_queue)
102
103 static int mac53c94_host_reset(struct scsi_cmnd *cmd)
104 {
105 struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata;
106 struct mac53c94_regs __iomem *regs = state->regs;
107 struct dbdma_regs __iomem *dma = state->dma;
108 unsigned long flags;
109
110 spin_lock_irqsave(cmd->device->host->host_lock, flags);
111
112 writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control);
113 writeb(CMD_SCSI_RESET, ®s->command); /* assert RST */
114 udelay(100); /* leave it on for a while (>= 25us) */
115 writeb(CMD_RESET, ®s->command);
116 udelay(20);
117 mac53c94_init(state);
118 writeb(CMD_NOP, ®s->command);
119
120 spin_unlock_irqrestore(cmd->device->host->host_lock, flags);
121 return SUCCESS;
122 }
123
mac53c94_init(struct fsc_state * state)124 static void mac53c94_init(struct fsc_state *state)
125 {
126 struct mac53c94_regs __iomem *regs = state->regs;
127 struct dbdma_regs __iomem *dma = state->dma;
128
129 writeb(state->host->this_id | CF1_PAR_ENABLE, ®s->config1);
130 writeb(TIMO_VAL(250), ®s->sel_timeout); /* 250ms */
131 writeb(CLKF_VAL(state->clk_freq), ®s->clk_factor);
132 writeb(CF2_FEATURE_EN, ®s->config2);
133 writeb(0, ®s->config3);
134 writeb(0, ®s->sync_period);
135 writeb(0, ®s->sync_offset);
136 (void)readb(®s->interrupt);
137 writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control);
138 }
139
140 /*
141 * Start the next command for a 53C94.
142 * Should be called with interrupts disabled.
143 */
mac53c94_start(struct fsc_state * state)144 static void mac53c94_start(struct fsc_state *state)
145 {
146 struct scsi_cmnd *cmd;
147 struct mac53c94_regs __iomem *regs = state->regs;
148 int i;
149
150 if (state->phase != idle || state->current_req != NULL)
151 panic("inappropriate mac53c94_start (state=%p)", state);
152 if (state->request_q == NULL)
153 return;
154 state->current_req = cmd = state->request_q;
155 state->request_q = (struct scsi_cmnd *) cmd->host_scribble;
156
157 /* Off we go */
158 writeb(0, ®s->count_lo);
159 writeb(0, ®s->count_mid);
160 writeb(0, ®s->count_hi);
161 writeb(CMD_NOP + CMD_DMA_MODE, ®s->command);
162 udelay(1);
163 writeb(CMD_FLUSH, ®s->command);
164 udelay(1);
165 writeb(cmd->device->id, ®s->dest_id);
166 writeb(0, ®s->sync_period);
167 writeb(0, ®s->sync_offset);
168
169 /* load the command into the FIFO */
170 for (i = 0; i < cmd->cmd_len; ++i)
171 writeb(cmd->cmnd[i], ®s->fifo);
172
173 /* do select without ATN XXX */
174 writeb(CMD_SELECT, ®s->command);
175 state->phase = selecting;
176
177 set_dma_cmds(state, cmd);
178 }
179
do_mac53c94_interrupt(int irq,void * dev_id)180 static irqreturn_t do_mac53c94_interrupt(int irq, void *dev_id)
181 {
182 unsigned long flags;
183 struct Scsi_Host *dev = ((struct fsc_state *) dev_id)->current_req->device->host;
184
185 spin_lock_irqsave(dev->host_lock, flags);
186 mac53c94_interrupt(irq, dev_id);
187 spin_unlock_irqrestore(dev->host_lock, flags);
188 return IRQ_HANDLED;
189 }
190
mac53c94_interrupt(int irq,void * dev_id)191 static void mac53c94_interrupt(int irq, void *dev_id)
192 {
193 struct fsc_state *state = (struct fsc_state *) dev_id;
194 struct mac53c94_regs __iomem *regs = state->regs;
195 struct dbdma_regs __iomem *dma = state->dma;
196 struct scsi_cmnd *const cmd = state->current_req;
197 struct mac53c94_cmd_priv *const mcmd = mac53c94_priv(cmd);
198 int nb, stat, seq, intr;
199 static int mac53c94_errors;
200
201 /*
202 * Apparently, reading the interrupt register unlatches
203 * the status and sequence step registers.
204 */
205 seq = readb(®s->seqstep);
206 stat = readb(®s->status);
207 intr = readb(®s->interrupt);
208
209 #if 0
210 printk(KERN_DEBUG "mac53c94_intr, intr=%x stat=%x seq=%x phase=%d\n",
211 intr, stat, seq, state->phase);
212 #endif
213
214 if (intr & INTR_RESET) {
215 /* SCSI bus was reset */
216 printk(KERN_INFO "external SCSI bus reset detected\n");
217 writeb(CMD_NOP, ®s->command);
218 writel(RUN << 16, &dma->control); /* stop dma */
219 cmd_done(state, DID_RESET << 16);
220 return;
221 }
222 if (intr & INTR_ILL_CMD) {
223 printk(KERN_ERR "53c94: invalid cmd, intr=%x stat=%x seq=%x phase=%d\n",
224 intr, stat, seq, state->phase);
225 cmd_done(state, DID_ERROR << 16);
226 return;
227 }
228 if (stat & STAT_ERROR) {
229 #if 0
230 /* XXX these seem to be harmless? */
231 printk("53c94: bad error, intr=%x stat=%x seq=%x phase=%d\n",
232 intr, stat, seq, state->phase);
233 #endif
234 ++mac53c94_errors;
235 writeb(CMD_NOP + CMD_DMA_MODE, ®s->command);
236 }
237 if (!cmd) {
238 printk(KERN_DEBUG "53c94: interrupt with no command active?\n");
239 return;
240 }
241 if (stat & STAT_PARITY) {
242 printk(KERN_ERR "mac53c94: parity error\n");
243 cmd_done(state, DID_PARITY << 16);
244 return;
245 }
246 switch (state->phase) {
247 case selecting:
248 if (intr & INTR_DISCONNECT) {
249 /* selection timed out */
250 cmd_done(state, DID_BAD_TARGET << 16);
251 return;
252 }
253 if (intr != INTR_BUS_SERV + INTR_DONE) {
254 printk(KERN_DEBUG "got intr %x during selection\n", intr);
255 cmd_done(state, DID_ERROR << 16);
256 return;
257 }
258 if ((seq & SS_MASK) != SS_DONE) {
259 printk(KERN_DEBUG "seq step %x after command\n", seq);
260 cmd_done(state, DID_ERROR << 16);
261 return;
262 }
263 writeb(CMD_NOP, ®s->command);
264 /* set DMA controller going if any data to transfer */
265 if ((stat & (STAT_MSG|STAT_CD)) == 0
266 && (scsi_sg_count(cmd) > 0 || scsi_bufflen(cmd))) {
267 nb = mcmd->this_residual;
268 if (nb > 0xfff0)
269 nb = 0xfff0;
270 mcmd->this_residual -= nb;
271 writeb(nb, ®s->count_lo);
272 writeb(nb >> 8, ®s->count_mid);
273 writeb(CMD_DMA_MODE + CMD_NOP, ®s->command);
274 writel(virt_to_phys(state->dma_cmds), &dma->cmdptr);
275 writel((RUN << 16) | RUN, &dma->control);
276 writeb(CMD_DMA_MODE + CMD_XFER_DATA, ®s->command);
277 state->phase = dataing;
278 break;
279 } else if ((stat & STAT_PHASE) == STAT_CD + STAT_IO) {
280 /* up to status phase already */
281 writeb(CMD_I_COMPLETE, ®s->command);
282 state->phase = completing;
283 } else {
284 printk(KERN_DEBUG "in unexpected phase %x after cmd\n",
285 stat & STAT_PHASE);
286 cmd_done(state, DID_ERROR << 16);
287 return;
288 }
289 break;
290
291 case dataing:
292 if (intr != INTR_BUS_SERV) {
293 printk(KERN_DEBUG "got intr %x before status\n", intr);
294 cmd_done(state, DID_ERROR << 16);
295 return;
296 }
297 if (mcmd->this_residual != 0
298 && (stat & (STAT_MSG|STAT_CD)) == 0) {
299 /* Set up the count regs to transfer more */
300 nb = mcmd->this_residual;
301 if (nb > 0xfff0)
302 nb = 0xfff0;
303 mcmd->this_residual -= nb;
304 writeb(nb, ®s->count_lo);
305 writeb(nb >> 8, ®s->count_mid);
306 writeb(CMD_DMA_MODE + CMD_NOP, ®s->command);
307 writeb(CMD_DMA_MODE + CMD_XFER_DATA, ®s->command);
308 break;
309 }
310 if ((stat & STAT_PHASE) != STAT_CD + STAT_IO) {
311 printk(KERN_DEBUG "intr %x before data xfer complete\n", intr);
312 }
313 writel(RUN << 16, &dma->control); /* stop dma */
314 scsi_dma_unmap(cmd);
315 /* should check dma status */
316 writeb(CMD_I_COMPLETE, ®s->command);
317 state->phase = completing;
318 break;
319 case completing:
320 if (intr != INTR_DONE) {
321 printk(KERN_DEBUG "got intr %x on completion\n", intr);
322 cmd_done(state, DID_ERROR << 16);
323 return;
324 }
325 mcmd->status = readb(®s->fifo);
326 mcmd->message = readb(®s->fifo);
327 writeb(CMD_ACCEPT_MSG, ®s->command);
328 state->phase = busfreeing;
329 break;
330 case busfreeing:
331 if (intr != INTR_DISCONNECT) {
332 printk(KERN_DEBUG "got intr %x when expected disconnect\n", intr);
333 }
334 cmd_done(state, (DID_OK << 16) + (mcmd->message << 8) + mcmd->status);
335 break;
336 default:
337 printk(KERN_DEBUG "don't know about phase %d\n", state->phase);
338 }
339 }
340
cmd_done(struct fsc_state * state,int result)341 static void cmd_done(struct fsc_state *state, int result)
342 {
343 struct scsi_cmnd *cmd;
344
345 cmd = state->current_req;
346 if (cmd) {
347 cmd->result = result;
348 scsi_done(cmd);
349 state->current_req = NULL;
350 }
351 state->phase = idle;
352 mac53c94_start(state);
353 }
354
355 /*
356 * Set up DMA commands for transferring data.
357 */
set_dma_cmds(struct fsc_state * state,struct scsi_cmnd * cmd)358 static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd)
359 {
360 int i, dma_cmd, total, nseg;
361 struct scatterlist *scl;
362 struct dbdma_cmd *dcmds;
363 dma_addr_t dma_addr;
364 u32 dma_len;
365
366 nseg = scsi_dma_map(cmd);
367 BUG_ON(nseg < 0);
368 if (!nseg)
369 return;
370
371 dma_cmd = cmd->sc_data_direction == DMA_TO_DEVICE ?
372 OUTPUT_MORE : INPUT_MORE;
373 dcmds = state->dma_cmds;
374 total = 0;
375
376 scsi_for_each_sg(cmd, scl, nseg, i) {
377 dma_addr = sg_dma_address(scl);
378 dma_len = sg_dma_len(scl);
379 if (dma_len > 0xffff)
380 panic("mac53c94: scatterlist element >= 64k");
381 total += dma_len;
382 dcmds->req_count = cpu_to_le16(dma_len);
383 dcmds->command = cpu_to_le16(dma_cmd);
384 dcmds->phy_addr = cpu_to_le32(dma_addr);
385 dcmds->xfer_status = 0;
386 ++dcmds;
387 }
388
389 dma_cmd += OUTPUT_LAST - OUTPUT_MORE;
390 dcmds[-1].command = cpu_to_le16(dma_cmd);
391 dcmds->command = cpu_to_le16(DBDMA_STOP);
392 mac53c94_priv(cmd)->this_residual = total;
393 }
394
395 static const struct scsi_host_template mac53c94_template = {
396 .proc_name = "53c94",
397 .name = "53C94",
398 .queuecommand = mac53c94_queue,
399 .eh_host_reset_handler = mac53c94_host_reset,
400 .can_queue = 1,
401 .this_id = 7,
402 .sg_tablesize = SG_ALL,
403 .max_segment_size = 65535,
404 .cmd_size = sizeof(struct mac53c94_cmd_priv),
405 };
406
mac53c94_probe(struct macio_dev * mdev,const struct of_device_id * match)407 static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *match)
408 {
409 struct device_node *node = macio_get_of_node(mdev);
410 struct pci_dev *pdev = macio_get_pci_dev(mdev);
411 struct fsc_state *state;
412 struct Scsi_Host *host;
413 void *dma_cmd_space;
414 const unsigned char *clkprop;
415 int proplen, rc = -ENODEV;
416
417 if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) {
418 printk(KERN_ERR "mac53c94: expected 2 addrs and intrs"
419 " (got %d/%d)\n",
420 macio_resource_count(mdev), macio_irq_count(mdev));
421 return -ENODEV;
422 }
423
424 if (macio_request_resources(mdev, "mac53c94") != 0) {
425 printk(KERN_ERR "mac53c94: unable to request memory resources");
426 return -EBUSY;
427 }
428
429 host = scsi_host_alloc(&mac53c94_template, sizeof(struct fsc_state));
430 if (host == NULL) {
431 printk(KERN_ERR "mac53c94: couldn't register host");
432 rc = -ENOMEM;
433 goto out_release;
434 }
435
436 state = (struct fsc_state *) host->hostdata;
437 macio_set_drvdata(mdev, state);
438 state->host = host;
439 state->pdev = pdev;
440 state->mdev = mdev;
441
442 state->regs = (struct mac53c94_regs __iomem *)
443 ioremap(macio_resource_start(mdev, 0), 0x1000);
444 state->intr = macio_irq(mdev, 0);
445 state->dma = (struct dbdma_regs __iomem *)
446 ioremap(macio_resource_start(mdev, 1), 0x1000);
447 state->dmaintr = macio_irq(mdev, 1);
448 if (state->regs == NULL || state->dma == NULL) {
449 printk(KERN_ERR "mac53c94: ioremap failed for %pOF\n", node);
450 goto out_free;
451 }
452
453 clkprop = of_get_property(node, "clock-frequency", &proplen);
454 if (clkprop == NULL || proplen != sizeof(int)) {
455 printk(KERN_ERR "%pOF: can't get clock frequency, "
456 "assuming 25MHz\n", node);
457 state->clk_freq = 25000000;
458 } else
459 state->clk_freq = *(int *)clkprop;
460
461 /* Space for dma command list: +1 for stop command,
462 * +1 to allow for aligning.
463 * XXX FIXME: Use DMA consistent routines
464 */
465 dma_cmd_space = kmalloc_array(host->sg_tablesize + 2,
466 sizeof(struct dbdma_cmd),
467 GFP_KERNEL);
468 if (!dma_cmd_space) {
469 printk(KERN_ERR "mac53c94: couldn't allocate dma "
470 "command space for %pOF\n", node);
471 rc = -ENOMEM;
472 goto out_free;
473 }
474
475 state->dma_cmds = (struct dbdma_cmd *)DBDMA_ALIGN(dma_cmd_space);
476 memset(state->dma_cmds, 0, (host->sg_tablesize + 1)
477 * sizeof(struct dbdma_cmd));
478 state->dma_cmd_space = dma_cmd_space;
479
480 mac53c94_init(state);
481
482 if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94",state)) {
483 printk(KERN_ERR "mac53C94: can't get irq %d for %pOF\n",
484 state->intr, node);
485 goto out_free_dma;
486 }
487
488 rc = scsi_add_host(host, &mdev->ofdev.dev);
489 if (rc != 0)
490 goto out_release_irq;
491
492 scsi_scan_host(host);
493 return 0;
494
495 out_release_irq:
496 free_irq(state->intr, state);
497 out_free_dma:
498 kfree(state->dma_cmd_space);
499 out_free:
500 if (state->dma != NULL)
501 iounmap(state->dma);
502 if (state->regs != NULL)
503 iounmap(state->regs);
504 scsi_host_put(host);
505 out_release:
506 macio_release_resources(mdev);
507
508 return rc;
509 }
510
mac53c94_remove(struct macio_dev * mdev)511 static int mac53c94_remove(struct macio_dev *mdev)
512 {
513 struct fsc_state *fp = (struct fsc_state *)macio_get_drvdata(mdev);
514 struct Scsi_Host *host = fp->host;
515
516 scsi_remove_host(host);
517
518 free_irq(fp->intr, fp);
519
520 if (fp->regs)
521 iounmap(fp->regs);
522 if (fp->dma)
523 iounmap(fp->dma);
524 kfree(fp->dma_cmd_space);
525
526 scsi_host_put(host);
527
528 macio_release_resources(mdev);
529
530 return 0;
531 }
532
533
534 static struct of_device_id mac53c94_match[] =
535 {
536 {
537 .name = "53c94",
538 },
539 {},
540 };
541 MODULE_DEVICE_TABLE (of, mac53c94_match);
542
543 static struct macio_driver mac53c94_driver =
544 {
545 .driver = {
546 .name = "mac53c94",
547 .owner = THIS_MODULE,
548 .of_match_table = mac53c94_match,
549 },
550 .probe = mac53c94_probe,
551 .remove = mac53c94_remove,
552 };
553
554
init_mac53c94(void)555 static int __init init_mac53c94(void)
556 {
557 return macio_register_driver(&mac53c94_driver);
558 }
559
exit_mac53c94(void)560 static void __exit exit_mac53c94(void)
561 {
562 return macio_unregister_driver(&mac53c94_driver);
563 }
564
565 module_init(init_mac53c94);
566 module_exit(exit_mac53c94);
567
568 MODULE_DESCRIPTION("PowerMac 53c94 SCSI driver");
569 MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
570 MODULE_LICENSE("GPL");
571