xref: /openbmc/linux/drivers/scsi/lpfc/lpfc_vport.c (revision ca637c0e)
1 /*******************************************************************
2  * This file is part of the Emulex Linux Device Driver for         *
3  * Fibre Channel Host Bus Adapters.                                *
4  * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
5  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
6  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
7  * EMULEX and SLI are trademarks of Emulex.                        *
8  * www.broadcom.com                                                *
9  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
10  *                                                                 *
11  * This program is free software; you can redistribute it and/or   *
12  * modify it under the terms of version 2 of the GNU General       *
13  * Public License as published by the Free Software Foundation.    *
14  * This program is distributed in the hope that it will be useful. *
15  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
16  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
17  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
18  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
19  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
20  * more details, a copy of which can be found in the file COPYING  *
21  * included with this package.                                     *
22  *******************************************************************/
23 
24 #include <linux/blkdev.h>
25 #include <linux/delay.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/idr.h>
28 #include <linux/interrupt.h>
29 #include <linux/kthread.h>
30 #include <linux/pci.h>
31 #include <linux/slab.h>
32 #include <linux/spinlock.h>
33 #include <linux/sched/signal.h>
34 
35 #include <scsi/scsi.h>
36 #include <scsi/scsi_device.h>
37 #include <scsi/scsi_host.h>
38 #include <scsi/scsi_transport_fc.h>
39 
40 #include "lpfc_hw4.h"
41 #include "lpfc_hw.h"
42 #include "lpfc_sli.h"
43 #include "lpfc_sli4.h"
44 #include "lpfc_nl.h"
45 #include "lpfc_disc.h"
46 #include "lpfc_scsi.h"
47 #include "lpfc.h"
48 #include "lpfc_logmsg.h"
49 #include "lpfc_crtn.h"
50 #include "lpfc_version.h"
51 #include "lpfc_vport.h"
52 
53 inline void lpfc_vport_set_state(struct lpfc_vport *vport,
54 				 enum fc_vport_state new_state)
55 {
56 	struct fc_vport *fc_vport = vport->fc_vport;
57 
58 	if (fc_vport) {
59 		/*
60 		 * When the transport defines fc_vport_set state we will replace
61 		 * this code with the following line
62 		 */
63 		/* fc_vport_set_state(fc_vport, new_state); */
64 		if (new_state != FC_VPORT_INITIALIZING)
65 			fc_vport->vport_last_state = fc_vport->vport_state;
66 		fc_vport->vport_state = new_state;
67 	}
68 
69 	/* for all the error states we will set the invternal state to FAILED */
70 	switch (new_state) {
71 	case FC_VPORT_NO_FABRIC_SUPP:
72 	case FC_VPORT_NO_FABRIC_RSCS:
73 	case FC_VPORT_FABRIC_LOGOUT:
74 	case FC_VPORT_FABRIC_REJ_WWN:
75 	case FC_VPORT_FAILED:
76 		vport->port_state = LPFC_VPORT_FAILED;
77 		break;
78 	case FC_VPORT_LINKDOWN:
79 		vport->port_state = LPFC_VPORT_UNKNOWN;
80 		break;
81 	default:
82 		/* do nothing */
83 		break;
84 	}
85 }
86 
87 int
88 lpfc_alloc_vpi(struct lpfc_hba *phba)
89 {
90 	unsigned long vpi;
91 
92 	spin_lock_irq(&phba->hbalock);
93 	/* Start at bit 1 because vpi zero is reserved for the physical port */
94 	vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1);
95 	if (vpi > phba->max_vpi)
96 		vpi = 0;
97 	else
98 		set_bit(vpi, phba->vpi_bmask);
99 	if (phba->sli_rev == LPFC_SLI_REV4)
100 		phba->sli4_hba.max_cfg_param.vpi_used++;
101 	spin_unlock_irq(&phba->hbalock);
102 	return vpi;
103 }
104 
105 static void
106 lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
107 {
108 	if (vpi == 0)
109 		return;
110 	spin_lock_irq(&phba->hbalock);
111 	clear_bit(vpi, phba->vpi_bmask);
112 	if (phba->sli_rev == LPFC_SLI_REV4)
113 		phba->sli4_hba.max_cfg_param.vpi_used--;
114 	spin_unlock_irq(&phba->hbalock);
115 }
116 
117 static int
118 lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
119 {
120 	LPFC_MBOXQ_t *pmb;
121 	MAILBOX_t *mb;
122 	struct lpfc_dmabuf *mp;
123 	int  rc;
124 
125 	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
126 	if (!pmb) {
127 		return -ENOMEM;
128 	}
129 	mb = &pmb->u.mb;
130 
131 	rc = lpfc_read_sparam(phba, pmb, vport->vpi);
132 	if (rc) {
133 		mempool_free(pmb, phba->mbox_mem_pool);
134 		return -ENOMEM;
135 	}
136 
137 	/*
138 	 * Wait for the read_sparams mailbox to complete.  Driver needs
139 	 * this per vport to start the FDISC.  If the mailbox fails,
140 	 * just cleanup and return an error unless the failure is a
141 	 * mailbox timeout.  For MBX_TIMEOUT, allow the default
142 	 * mbox completion handler to take care of the cleanup.  This
143 	 * is safe as the mailbox command isn't one that triggers
144 	 * another mailbox.
145 	 */
146 	pmb->vport = vport;
147 	rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2);
148 	if (rc != MBX_SUCCESS) {
149 		if (signal_pending(current)) {
150 			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
151 					 "1830 Signal aborted mbxCmd x%x\n",
152 					 mb->mbxCommand);
153 			if (rc != MBX_TIMEOUT)
154 				lpfc_mbox_rsrc_cleanup(phba, pmb,
155 						       MBOX_THD_UNLOCKED);
156 			return -EINTR;
157 		} else {
158 			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
159 					 "1818 VPort failed init, mbxCmd x%x "
160 					 "READ_SPARM mbxStatus x%x, rc = x%x\n",
161 					 mb->mbxCommand, mb->mbxStatus, rc);
162 			if (rc != MBX_TIMEOUT)
163 				lpfc_mbox_rsrc_cleanup(phba, pmb,
164 						       MBOX_THD_UNLOCKED);
165 			return -EIO;
166 		}
167 	}
168 
169 	mp = (struct lpfc_dmabuf *)pmb->ctx_buf;
170 	memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
171 	memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
172 	       sizeof (struct lpfc_name));
173 	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
174 	       sizeof (struct lpfc_name));
175 	lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED);
176 	return 0;
177 }
178 
179 static int
180 lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn,
181 		      const char *name_type)
182 {
183 				/* ensure that IEEE format 1 addresses
184 				 * contain zeros in bits 59-48
185 				 */
186 	if (!((wwn->u.wwn[0] >> 4) == 1 &&
187 	      ((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0)))
188 		return 1;
189 
190 	lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
191 			"1822 Invalid %s: %02x:%02x:%02x:%02x:"
192 			"%02x:%02x:%02x:%02x\n",
193 			name_type,
194 			wwn->u.wwn[0], wwn->u.wwn[1],
195 			wwn->u.wwn[2], wwn->u.wwn[3],
196 			wwn->u.wwn[4], wwn->u.wwn[5],
197 			wwn->u.wwn[6], wwn->u.wwn[7]);
198 	return 0;
199 }
200 
201 static int
202 lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport)
203 {
204 	struct lpfc_vport *vport;
205 	unsigned long flags;
206 
207 	spin_lock_irqsave(&phba->port_list_lock, flags);
208 	list_for_each_entry(vport, &phba->port_list, listentry) {
209 		if (vport == new_vport)
210 			continue;
211 		/* If they match, return not unique */
212 		if (memcmp(&vport->fc_sparam.portName,
213 			   &new_vport->fc_sparam.portName,
214 			   sizeof(struct lpfc_name)) == 0) {
215 			spin_unlock_irqrestore(&phba->port_list_lock, flags);
216 			return 0;
217 		}
218 	}
219 	spin_unlock_irqrestore(&phba->port_list_lock, flags);
220 	return 1;
221 }
222 
223 /**
224  * lpfc_discovery_wait - Wait for driver discovery to quiesce
225  * @vport: The virtual port for which this call is being executed.
226  *
227  * This driver calls this routine specifically from lpfc_vport_delete
228  * to enforce a synchronous execution of vport
229  * delete relative to discovery activities.  The
230  * lpfc_vport_delete routine should not return until it
231  * can reasonably guarantee that discovery has quiesced.
232  * Post FDISC LOGO, the driver must wait until its SAN teardown is
233  * complete and all resources recovered before allowing
234  * cleanup.
235  *
236  * This routine does not require any locks held.
237  **/
238 static void lpfc_discovery_wait(struct lpfc_vport *vport)
239 {
240 	struct lpfc_hba *phba = vport->phba;
241 	uint32_t wait_flags = 0;
242 	unsigned long wait_time_max;
243 	unsigned long start_time;
244 
245 	wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE |
246 		     FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO;
247 
248 	/*
249 	 * The time constraint on this loop is a balance between the
250 	 * fabric RA_TOV value and dev_loss tmo.  The driver's
251 	 * devloss_tmo is 10 giving this loop a 3x multiplier minimally.
252 	 */
253 	wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000);
254 	wait_time_max += jiffies;
255 	start_time = jiffies;
256 	while (time_before(jiffies, wait_time_max)) {
257 		if ((vport->num_disc_nodes > 0)    ||
258 		    (vport->fc_flag & wait_flags)  ||
259 		    ((vport->port_state > LPFC_VPORT_FAILED) &&
260 		     (vport->port_state < LPFC_VPORT_READY))) {
261 			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
262 					"1833 Vport discovery quiesce Wait:"
263 					" state x%x fc_flags x%x"
264 					" num_nodes x%x, waiting 1000 msecs"
265 					" total wait msecs x%x\n",
266 					vport->port_state, vport->fc_flag,
267 					vport->num_disc_nodes,
268 					jiffies_to_msecs(jiffies - start_time));
269 			msleep(1000);
270 		} else {
271 			/* Base case.  Wait variants satisfied.  Break out */
272 			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
273 					 "1834 Vport discovery quiesced:"
274 					 " state x%x fc_flags x%x"
275 					 " wait msecs x%x\n",
276 					 vport->port_state, vport->fc_flag,
277 					 jiffies_to_msecs(jiffies
278 						- start_time));
279 			break;
280 		}
281 	}
282 
283 	if (time_after(jiffies, wait_time_max))
284 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
285 				 "1835 Vport discovery quiesce failed:"
286 				 " state x%x fc_flags x%x wait msecs x%x\n",
287 				 vport->port_state, vport->fc_flag,
288 				 jiffies_to_msecs(jiffies - start_time));
289 }
290 
291 int
292 lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
293 {
294 	struct lpfc_nodelist *ndlp;
295 	struct Scsi_Host *shost = fc_vport->shost;
296 	struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata;
297 	struct lpfc_hba   *phba = pport->phba;
298 	struct lpfc_vport *vport = NULL;
299 	int instance;
300 	int vpi;
301 	int rc = VPORT_ERROR;
302 	int status;
303 
304 	if ((phba->sli_rev < 3) || !(phba->cfg_enable_npiv)) {
305 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
306 				"1808 Create VPORT failed: "
307 				"NPIV is not enabled: SLImode:%d\n",
308 				phba->sli_rev);
309 		rc = VPORT_INVAL;
310 		goto error_out;
311 	}
312 
313 	/* NPIV is not supported if HBA has NVME Target enabled */
314 	if (phba->nvmet_support) {
315 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
316 				"3189 Create VPORT failed: "
317 				"NPIV is not supported on NVME Target\n");
318 		rc = VPORT_INVAL;
319 		goto error_out;
320 	}
321 
322 	vpi = lpfc_alloc_vpi(phba);
323 	if (vpi == 0) {
324 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
325 				"1809 Create VPORT failed: "
326 				"Max VPORTs (%d) exceeded\n",
327 				phba->max_vpi);
328 		rc = VPORT_NORESOURCES;
329 		goto error_out;
330 	}
331 
332 	/* Assign an unused board number */
333 	if ((instance = lpfc_get_instance()) < 0) {
334 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
335 				"1810 Create VPORT failed: Cannot get "
336 				"instance number\n");
337 		lpfc_free_vpi(phba, vpi);
338 		rc = VPORT_NORESOURCES;
339 		goto error_out;
340 	}
341 
342 	vport = lpfc_create_port(phba, instance, &fc_vport->dev);
343 	if (!vport) {
344 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
345 				"1811 Create VPORT failed: vpi x%x\n", vpi);
346 		lpfc_free_vpi(phba, vpi);
347 		rc = VPORT_NORESOURCES;
348 		goto error_out;
349 	}
350 
351 	vport->vpi = vpi;
352 	lpfc_debugfs_initialize(vport);
353 
354 	if ((status = lpfc_vport_sparm(phba, vport))) {
355 		if (status == -EINTR) {
356 			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
357 					 "1831 Create VPORT Interrupted.\n");
358 			rc = VPORT_ERROR;
359 		} else {
360 			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
361 					 "1813 Create VPORT failed. "
362 					 "Cannot get sparam\n");
363 			rc = VPORT_NORESOURCES;
364 		}
365 		lpfc_free_vpi(phba, vpi);
366 		destroy_port(vport);
367 		goto error_out;
368 	}
369 
370 	u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn);
371 	u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn);
372 
373 	memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8);
374 	memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8);
375 
376 	if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") ||
377 	    !lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) {
378 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
379 				 "1821 Create VPORT failed. "
380 				 "Invalid WWN format\n");
381 		lpfc_free_vpi(phba, vpi);
382 		destroy_port(vport);
383 		rc = VPORT_INVAL;
384 		goto error_out;
385 	}
386 
387 	if (!lpfc_unique_wwpn(phba, vport)) {
388 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
389 				 "1823 Create VPORT failed. "
390 				 "Duplicate WWN on HBA\n");
391 		lpfc_free_vpi(phba, vpi);
392 		destroy_port(vport);
393 		rc = VPORT_INVAL;
394 		goto error_out;
395 	}
396 
397 	/* Create binary sysfs attribute for vport */
398 	lpfc_alloc_sysfs_attr(vport);
399 
400 	/* Set the DFT_LUN_Q_DEPTH accordingly */
401 	vport->cfg_lun_queue_depth  = phba->pport->cfg_lun_queue_depth;
402 
403 	/* Only the physical port can support NVME for now */
404 	vport->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
405 
406 	*(struct lpfc_vport **)fc_vport->dd_data = vport;
407 	vport->fc_vport = fc_vport;
408 
409 	/* At this point we are fully registered with SCSI Layer.  */
410 	vport->load_flag |= FC_ALLOW_FDMI;
411 	if (phba->cfg_enable_SmartSAN ||
412 	    (phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT)) {
413 		/* Setup appropriate attribute masks */
414 		vport->fdmi_hba_mask = phba->pport->fdmi_hba_mask;
415 		vport->fdmi_port_mask = phba->pport->fdmi_port_mask;
416 	}
417 
418 	/*
419 	 * In SLI4, the vpi must be activated before it can be used
420 	 * by the port.
421 	 */
422 	if ((phba->sli_rev == LPFC_SLI_REV4) &&
423 	    (pport->fc_flag & FC_VFI_REGISTERED)) {
424 		rc = lpfc_sli4_init_vpi(vport);
425 		if (rc) {
426 			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
427 					"1838 Failed to INIT_VPI on vpi %d "
428 					"status %d\n", vpi, rc);
429 			rc = VPORT_NORESOURCES;
430 			lpfc_free_vpi(phba, vpi);
431 			goto error_out;
432 		}
433 	} else if (phba->sli_rev == LPFC_SLI_REV4) {
434 		/*
435 		 * Driver cannot INIT_VPI now. Set the flags to
436 		 * init_vpi when reg_vfi complete.
437 		 */
438 		vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
439 		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
440 		rc = VPORT_OK;
441 		goto out;
442 	}
443 
444 	if ((phba->link_state < LPFC_LINK_UP) ||
445 	    (pport->port_state < LPFC_FABRIC_CFG_LINK) ||
446 	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
447 		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
448 		rc = VPORT_OK;
449 		goto out;
450 	}
451 
452 	if (disable) {
453 		lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
454 		rc = VPORT_OK;
455 		goto out;
456 	}
457 
458 	/* Use the Physical nodes Fabric NDLP to determine if the link is
459 	 * up and ready to FDISC.
460 	 */
461 	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
462 	if (ndlp &&
463 	    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
464 		if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
465 			lpfc_set_disctmo(vport);
466 			lpfc_initial_fdisc(vport);
467 		} else {
468 			lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
469 			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
470 					 "0262 No NPIV Fabric support\n");
471 		}
472 	} else {
473 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
474 	}
475 	rc = VPORT_OK;
476 
477 out:
478 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
479 			 "1825 Vport Created.\n");
480 	lpfc_host_attrib_init(lpfc_shost_from_vport(vport));
481 error_out:
482 	return rc;
483 }
484 
485 static int
486 lpfc_send_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
487 {
488 	int rc;
489 	struct lpfc_hba *phba = vport->phba;
490 
491 	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
492 
493 	spin_lock_irq(&ndlp->lock);
494 	if (!(ndlp->save_flags & NLP_WAIT_FOR_LOGO) &&
495 	    !ndlp->logo_waitq) {
496 		ndlp->logo_waitq = &waitq;
497 		ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
498 		ndlp->nlp_flag |= NLP_ISSUE_LOGO;
499 		ndlp->save_flags |= NLP_WAIT_FOR_LOGO;
500 	}
501 	spin_unlock_irq(&ndlp->lock);
502 	rc = lpfc_issue_els_npiv_logo(vport, ndlp);
503 	if (!rc) {
504 		wait_event_timeout(waitq,
505 				   (!(ndlp->save_flags & NLP_WAIT_FOR_LOGO)),
506 				   msecs_to_jiffies(phba->fc_ratov * 2000));
507 
508 		if (!(ndlp->save_flags & NLP_WAIT_FOR_LOGO))
509 			goto logo_cmpl;
510 		/* LOGO wait failed.  Correct status. */
511 		rc = -EINTR;
512 	} else {
513 		rc = -EIO;
514 	}
515 
516 	/* Error - clean up node flags. */
517 	spin_lock_irq(&ndlp->lock);
518 	ndlp->nlp_flag &= ~NLP_ISSUE_LOGO;
519 	ndlp->save_flags &= ~NLP_WAIT_FOR_LOGO;
520 	spin_unlock_irq(&ndlp->lock);
521 
522  logo_cmpl:
523 	lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
524 			 "1824 Issue LOGO completes with status %d\n",
525 			 rc);
526 	spin_lock_irq(&ndlp->lock);
527 	ndlp->logo_waitq = NULL;
528 	spin_unlock_irq(&ndlp->lock);
529 	return rc;
530 }
531 
532 static int
533 disable_vport(struct fc_vport *fc_vport)
534 {
535 	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
536 	struct lpfc_hba   *phba = vport->phba;
537 	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
538 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
539 
540 	/* Can't disable during an outstanding delete. */
541 	if (vport->load_flag & FC_UNLOADING)
542 		return 0;
543 
544 	ndlp = lpfc_findnode_did(vport, Fabric_DID);
545 	if (ndlp && phba->link_state >= LPFC_LINK_UP)
546 		(void)lpfc_send_npiv_logo(vport, ndlp);
547 
548 	lpfc_sli_host_down(vport);
549 
550 	/* Mark all nodes for discovery so we can remove them by
551 	 * calling lpfc_cleanup_rpis(vport, 1)
552 	 */
553 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
554 		if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
555 			continue;
556 		lpfc_disc_state_machine(vport, ndlp, NULL,
557 					NLP_EVT_DEVICE_RECOVERY);
558 	}
559 	lpfc_cleanup_rpis(vport, 1);
560 
561 	lpfc_stop_vport_timers(vport);
562 	lpfc_unreg_all_rpis(vport);
563 	lpfc_unreg_default_rpis(vport);
564 	/*
565 	 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the
566 	 * scsi_host_put() to release the vport.
567 	 */
568 	lpfc_mbx_unreg_vpi(vport);
569 	if (phba->sli_rev == LPFC_SLI_REV4) {
570 		spin_lock_irq(shost->host_lock);
571 		vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
572 		spin_unlock_irq(shost->host_lock);
573 	}
574 
575 	lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
576 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
577 			 "1826 Vport Disabled.\n");
578 	return VPORT_OK;
579 }
580 
581 static int
582 enable_vport(struct fc_vport *fc_vport)
583 {
584 	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
585 	struct lpfc_hba   *phba = vport->phba;
586 	struct lpfc_nodelist *ndlp = NULL;
587 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
588 
589 	if ((phba->link_state < LPFC_LINK_UP) ||
590 	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
591 		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
592 		return VPORT_OK;
593 	}
594 
595 	spin_lock_irq(shost->host_lock);
596 	vport->load_flag |= FC_LOADING;
597 	if (vport->fc_flag & FC_VPORT_NEEDS_INIT_VPI) {
598 		spin_unlock_irq(shost->host_lock);
599 		lpfc_issue_init_vpi(vport);
600 		goto out;
601 	}
602 
603 	vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
604 	spin_unlock_irq(shost->host_lock);
605 
606 	/* Use the Physical nodes Fabric NDLP to determine if the link is
607 	 * up and ready to FDISC.
608 	 */
609 	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
610 	if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
611 		if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
612 			lpfc_set_disctmo(vport);
613 			lpfc_initial_fdisc(vport);
614 		} else {
615 			lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
616 			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
617 					 "0264 No NPIV Fabric support\n");
618 		}
619 	} else {
620 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
621 	}
622 
623 out:
624 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
625 			 "1827 Vport Enabled.\n");
626 	return VPORT_OK;
627 }
628 
629 int
630 lpfc_vport_disable(struct fc_vport *fc_vport, bool disable)
631 {
632 	if (disable)
633 		return disable_vport(fc_vport);
634 	else
635 		return enable_vport(fc_vport);
636 }
637 
638 int
639 lpfc_vport_delete(struct fc_vport *fc_vport)
640 {
641 	struct lpfc_nodelist *ndlp = NULL;
642 	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
643 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
644 	struct lpfc_hba  *phba = vport->phba;
645 	int rc;
646 
647 	if (vport->port_type == LPFC_PHYSICAL_PORT) {
648 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
649 				 "1812 vport_delete failed: Cannot delete "
650 				 "physical host\n");
651 		return VPORT_ERROR;
652 	}
653 
654 	/* If the vport is a static vport fail the deletion. */
655 	if ((vport->vport_flag & STATIC_VPORT) &&
656 		!(phba->pport->load_flag & FC_UNLOADING)) {
657 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
658 				 "1837 vport_delete failed: Cannot delete "
659 				 "static vport.\n");
660 		return VPORT_ERROR;
661 	}
662 
663 	spin_lock_irq(&phba->hbalock);
664 	vport->load_flag |= FC_UNLOADING;
665 	spin_unlock_irq(&phba->hbalock);
666 
667 	/*
668 	 * If we are not unloading the driver then prevent the vport_delete
669 	 * from happening until after this vport's discovery is finished.
670 	 */
671 	if (!(phba->pport->load_flag & FC_UNLOADING)) {
672 		int check_count = 0;
673 		while (check_count < ((phba->fc_ratov * 3) + 3) &&
674 		       vport->port_state > LPFC_VPORT_FAILED &&
675 		       vport->port_state < LPFC_VPORT_READY) {
676 			check_count++;
677 			msleep(1000);
678 		}
679 		if (vport->port_state > LPFC_VPORT_FAILED &&
680 		    vport->port_state < LPFC_VPORT_READY)
681 			return -EAGAIN;
682 	}
683 
684 	/*
685 	 * Take early refcount for outstanding I/O requests we schedule during
686 	 * delete processing for unreg_vpi.  Always keep this before
687 	 * scsi_remove_host() as we can no longer obtain a reference through
688 	 * scsi_host_get() after scsi_host_remove as shost is set to SHOST_DEL.
689 	 */
690 	if (!scsi_host_get(shost))
691 		return VPORT_INVAL;
692 
693 	lpfc_free_sysfs_attr(vport);
694 	lpfc_debugfs_terminate(vport);
695 
696 	/* Remove FC host to break driver binding. */
697 	fc_remove_host(shost);
698 	scsi_remove_host(shost);
699 
700 	/* Send the DA_ID and Fabric LOGO to cleanup Nameserver entries. */
701 	ndlp = lpfc_findnode_did(vport, Fabric_DID);
702 	if (!ndlp)
703 		goto skip_logo;
704 
705 	if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
706 	    phba->link_state >= LPFC_LINK_UP &&
707 	    phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
708 		if (vport->cfg_enable_da_id) {
709 			/* Send DA_ID and wait for a completion. */
710 			rc = lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0);
711 			if (rc) {
712 				lpfc_printf_log(vport->phba, KERN_WARNING,
713 						LOG_VPORT,
714 						"1829 CT command failed to "
715 						"delete objects on fabric, "
716 						"rc %d\n", rc);
717 			}
718 		}
719 
720 		/*
721 		 * If the vpi is not registered, then a valid FDISC doesn't
722 		 * exist and there is no need for a ELS LOGO.  Just cleanup
723 		 * the ndlp.
724 		 */
725 		if (!(vport->vpi_state & LPFC_VPI_REGISTERED))
726 			goto skip_logo;
727 
728 		/* Issue a Fabric LOGO to cleanup fabric resources. */
729 		ndlp = lpfc_findnode_did(vport, Fabric_DID);
730 		if (!ndlp)
731 			goto skip_logo;
732 
733 		rc = lpfc_send_npiv_logo(vport, ndlp);
734 		if (rc)
735 			goto skip_logo;
736 	}
737 
738 	if (!(phba->pport->load_flag & FC_UNLOADING))
739 		lpfc_discovery_wait(vport);
740 
741 skip_logo:
742 
743 	lpfc_cleanup(vport);
744 
745 	/* Remove scsi host now.  The nodes are cleaned up. */
746 	lpfc_sli_host_down(vport);
747 	lpfc_stop_vport_timers(vport);
748 
749 	if (!(phba->pport->load_flag & FC_UNLOADING)) {
750 		lpfc_unreg_all_rpis(vport);
751 		lpfc_unreg_default_rpis(vport);
752 		/*
753 		 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi)
754 		 * does the scsi_host_put() to release the vport.
755 		 */
756 		if (!(vport->vpi_state & LPFC_VPI_REGISTERED) ||
757 				lpfc_mbx_unreg_vpi(vport))
758 			scsi_host_put(shost);
759 	} else {
760 		scsi_host_put(shost);
761 	}
762 
763 	lpfc_free_vpi(phba, vport->vpi);
764 	vport->work_port_events = 0;
765 	spin_lock_irq(&phba->port_list_lock);
766 	list_del_init(&vport->listentry);
767 	spin_unlock_irq(&phba->port_list_lock);
768 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
769 			 "1828 Vport Deleted.\n");
770 	scsi_host_put(shost);
771 	return VPORT_OK;
772 }
773 
774 struct lpfc_vport **
775 lpfc_create_vport_work_array(struct lpfc_hba *phba)
776 {
777 	struct lpfc_vport *port_iterator;
778 	struct lpfc_vport **vports;
779 	int index = 0;
780 	vports = kcalloc(phba->max_vports + 1, sizeof(struct lpfc_vport *),
781 			 GFP_KERNEL);
782 	if (vports == NULL)
783 		return NULL;
784 	spin_lock_irq(&phba->port_list_lock);
785 	list_for_each_entry(port_iterator, &phba->port_list, listentry) {
786 		if (port_iterator->load_flag & FC_UNLOADING)
787 			continue;
788 		if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) {
789 			lpfc_printf_vlog(port_iterator, KERN_ERR,
790 					 LOG_TRACE_EVENT,
791 					 "1801 Create vport work array FAILED: "
792 					 "cannot do scsi_host_get\n");
793 			continue;
794 		}
795 		vports[index++] = port_iterator;
796 	}
797 	spin_unlock_irq(&phba->port_list_lock);
798 	return vports;
799 }
800 
801 void
802 lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
803 {
804 	int i;
805 	if (vports == NULL)
806 		return;
807 	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
808 		scsi_host_put(lpfc_shost_from_vport(vports[i]));
809 	kfree(vports);
810 }
811 
812