xref: /openbmc/linux/drivers/scsi/lpfc/lpfc_vport.c (revision a2cce7a9)
1 /*******************************************************************
2  * This file is part of the Emulex Linux Device Driver for         *
3  * Fibre Channel Host Bus Adapters.                                *
4  * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
5  * EMULEX and SLI are trademarks of Emulex.                        *
6  * www.emulex.com                                                  *
7  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
8  *                                                                 *
9  * This program is free software; you can redistribute it and/or   *
10  * modify it under the terms of version 2 of the GNU General       *
11  * Public License as published by the Free Software Foundation.    *
12  * This program is distributed in the hope that it will be useful. *
13  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
14  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
15  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
16  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
18  * more details, a copy of which can be found in the file COPYING  *
19  * included with this package.                                     *
20  *******************************************************************/
21 
22 #include <linux/blkdev.h>
23 #include <linux/delay.h>
24 #include <linux/dma-mapping.h>
25 #include <linux/idr.h>
26 #include <linux/interrupt.h>
27 #include <linux/kthread.h>
28 #include <linux/pci.h>
29 #include <linux/slab.h>
30 #include <linux/spinlock.h>
31 
32 #include <scsi/scsi.h>
33 #include <scsi/scsi_device.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_transport_fc.h>
36 #include "lpfc_hw4.h"
37 #include "lpfc_hw.h"
38 #include "lpfc_sli.h"
39 #include "lpfc_sli4.h"
40 #include "lpfc_nl.h"
41 #include "lpfc_disc.h"
42 #include "lpfc_scsi.h"
43 #include "lpfc.h"
44 #include "lpfc_logmsg.h"
45 #include "lpfc_crtn.h"
46 #include "lpfc_version.h"
47 #include "lpfc_vport.h"
48 
49 inline void lpfc_vport_set_state(struct lpfc_vport *vport,
50 				 enum fc_vport_state new_state)
51 {
52 	struct fc_vport *fc_vport = vport->fc_vport;
53 
54 	if (fc_vport) {
55 		/*
56 		 * When the transport defines fc_vport_set state we will replace
57 		 * this code with the following line
58 		 */
59 		/* fc_vport_set_state(fc_vport, new_state); */
60 		if (new_state != FC_VPORT_INITIALIZING)
61 			fc_vport->vport_last_state = fc_vport->vport_state;
62 		fc_vport->vport_state = new_state;
63 	}
64 
65 	/* for all the error states we will set the invternal state to FAILED */
66 	switch (new_state) {
67 	case FC_VPORT_NO_FABRIC_SUPP:
68 	case FC_VPORT_NO_FABRIC_RSCS:
69 	case FC_VPORT_FABRIC_LOGOUT:
70 	case FC_VPORT_FABRIC_REJ_WWN:
71 	case FC_VPORT_FAILED:
72 		vport->port_state = LPFC_VPORT_FAILED;
73 		break;
74 	case FC_VPORT_LINKDOWN:
75 		vport->port_state = LPFC_VPORT_UNKNOWN;
76 		break;
77 	default:
78 		/* do nothing */
79 		break;
80 	}
81 }
82 
83 int
84 lpfc_alloc_vpi(struct lpfc_hba *phba)
85 {
86 	unsigned long vpi;
87 
88 	spin_lock_irq(&phba->hbalock);
89 	/* Start at bit 1 because vpi zero is reserved for the physical port */
90 	vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1);
91 	if (vpi > phba->max_vpi)
92 		vpi = 0;
93 	else
94 		set_bit(vpi, phba->vpi_bmask);
95 	if (phba->sli_rev == LPFC_SLI_REV4)
96 		phba->sli4_hba.max_cfg_param.vpi_used++;
97 	spin_unlock_irq(&phba->hbalock);
98 	return vpi;
99 }
100 
101 static void
102 lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
103 {
104 	if (vpi == 0)
105 		return;
106 	spin_lock_irq(&phba->hbalock);
107 	clear_bit(vpi, phba->vpi_bmask);
108 	if (phba->sli_rev == LPFC_SLI_REV4)
109 		phba->sli4_hba.max_cfg_param.vpi_used--;
110 	spin_unlock_irq(&phba->hbalock);
111 }
112 
113 static int
114 lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
115 {
116 	LPFC_MBOXQ_t *pmb;
117 	MAILBOX_t *mb;
118 	struct lpfc_dmabuf *mp;
119 	int  rc;
120 
121 	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
122 	if (!pmb) {
123 		return -ENOMEM;
124 	}
125 	mb = &pmb->u.mb;
126 
127 	rc = lpfc_read_sparam(phba, pmb, vport->vpi);
128 	if (rc) {
129 		mempool_free(pmb, phba->mbox_mem_pool);
130 		return -ENOMEM;
131 	}
132 
133 	/*
134 	 * Grab buffer pointer and clear context1 so we can use
135 	 * lpfc_sli_issue_box_wait
136 	 */
137 	mp = (struct lpfc_dmabuf *) pmb->context1;
138 	pmb->context1 = NULL;
139 
140 	pmb->vport = vport;
141 	rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2);
142 	if (rc != MBX_SUCCESS) {
143 		if (signal_pending(current)) {
144 			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
145 					 "1830 Signal aborted mbxCmd x%x\n",
146 					 mb->mbxCommand);
147 			lpfc_mbuf_free(phba, mp->virt, mp->phys);
148 			kfree(mp);
149 			if (rc != MBX_TIMEOUT)
150 				mempool_free(pmb, phba->mbox_mem_pool);
151 			return -EINTR;
152 		} else {
153 			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
154 					 "1818 VPort failed init, mbxCmd x%x "
155 					 "READ_SPARM mbxStatus x%x, rc = x%x\n",
156 					 mb->mbxCommand, mb->mbxStatus, rc);
157 			lpfc_mbuf_free(phba, mp->virt, mp->phys);
158 			kfree(mp);
159 			if (rc != MBX_TIMEOUT)
160 				mempool_free(pmb, phba->mbox_mem_pool);
161 			return -EIO;
162 		}
163 	}
164 
165 	memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
166 	memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
167 	       sizeof (struct lpfc_name));
168 	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
169 	       sizeof (struct lpfc_name));
170 
171 	lpfc_mbuf_free(phba, mp->virt, mp->phys);
172 	kfree(mp);
173 	mempool_free(pmb, phba->mbox_mem_pool);
174 
175 	return 0;
176 }
177 
178 static int
179 lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn,
180 		      const char *name_type)
181 {
182 				/* ensure that IEEE format 1 addresses
183 				 * contain zeros in bits 59-48
184 				 */
185 	if (!((wwn->u.wwn[0] >> 4) == 1 &&
186 	      ((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0)))
187 		return 1;
188 
189 	lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
190 			"1822 Invalid %s: %02x:%02x:%02x:%02x:"
191 			"%02x:%02x:%02x:%02x\n",
192 			name_type,
193 			wwn->u.wwn[0], wwn->u.wwn[1],
194 			wwn->u.wwn[2], wwn->u.wwn[3],
195 			wwn->u.wwn[4], wwn->u.wwn[5],
196 			wwn->u.wwn[6], wwn->u.wwn[7]);
197 	return 0;
198 }
199 
200 static int
201 lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport)
202 {
203 	struct lpfc_vport *vport;
204 	unsigned long flags;
205 
206 	spin_lock_irqsave(&phba->hbalock, flags);
207 	list_for_each_entry(vport, &phba->port_list, listentry) {
208 		if (vport == new_vport)
209 			continue;
210 		/* If they match, return not unique */
211 		if (memcmp(&vport->fc_sparam.portName,
212 			   &new_vport->fc_sparam.portName,
213 			   sizeof(struct lpfc_name)) == 0) {
214 			spin_unlock_irqrestore(&phba->hbalock, flags);
215 			return 0;
216 		}
217 	}
218 	spin_unlock_irqrestore(&phba->hbalock, flags);
219 	return 1;
220 }
221 
222 /**
223  * lpfc_discovery_wait - Wait for driver discovery to quiesce
224  * @vport: The virtual port for which this call is being executed.
225  *
226  * This driver calls this routine specifically from lpfc_vport_delete
227  * to enforce a synchronous execution of vport
228  * delete relative to discovery activities.  The
229  * lpfc_vport_delete routine should not return until it
230  * can reasonably guarantee that discovery has quiesced.
231  * Post FDISC LOGO, the driver must wait until its SAN teardown is
232  * complete and all resources recovered before allowing
233  * cleanup.
234  *
235  * This routine does not require any locks held.
236  **/
237 static void lpfc_discovery_wait(struct lpfc_vport *vport)
238 {
239 	struct lpfc_hba *phba = vport->phba;
240 	uint32_t wait_flags = 0;
241 	unsigned long wait_time_max;
242 	unsigned long start_time;
243 
244 	wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE |
245 		     FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO;
246 
247 	/*
248 	 * The time constraint on this loop is a balance between the
249 	 * fabric RA_TOV value and dev_loss tmo.  The driver's
250 	 * devloss_tmo is 10 giving this loop a 3x multiplier minimally.
251 	 */
252 	wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000);
253 	wait_time_max += jiffies;
254 	start_time = jiffies;
255 	while (time_before(jiffies, wait_time_max)) {
256 		if ((vport->num_disc_nodes > 0)    ||
257 		    (vport->fc_flag & wait_flags)  ||
258 		    ((vport->port_state > LPFC_VPORT_FAILED) &&
259 		     (vport->port_state < LPFC_VPORT_READY))) {
260 			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
261 					"1833 Vport discovery quiesce Wait:"
262 					" state x%x fc_flags x%x"
263 					" num_nodes x%x, waiting 1000 msecs"
264 					" total wait msecs x%x\n",
265 					vport->port_state, vport->fc_flag,
266 					vport->num_disc_nodes,
267 					jiffies_to_msecs(jiffies - start_time));
268 			msleep(1000);
269 		} else {
270 			/* Base case.  Wait variants satisfied.  Break out */
271 			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
272 					 "1834 Vport discovery quiesced:"
273 					 " state x%x fc_flags x%x"
274 					 " wait msecs x%x\n",
275 					 vport->port_state, vport->fc_flag,
276 					 jiffies_to_msecs(jiffies
277 						- start_time));
278 			break;
279 		}
280 	}
281 
282 	if (time_after(jiffies, wait_time_max))
283 		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
284 				"1835 Vport discovery quiesce failed:"
285 				" state x%x fc_flags x%x wait msecs x%x\n",
286 				vport->port_state, vport->fc_flag,
287 				jiffies_to_msecs(jiffies - start_time));
288 }
289 
290 int
291 lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
292 {
293 	struct lpfc_nodelist *ndlp;
294 	struct Scsi_Host *shost = fc_vport->shost;
295 	struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata;
296 	struct lpfc_hba   *phba = pport->phba;
297 	struct lpfc_vport *vport = NULL;
298 	int instance;
299 	int vpi;
300 	int rc = VPORT_ERROR;
301 	int status;
302 
303 	if ((phba->sli_rev < 3) || !(phba->cfg_enable_npiv)) {
304 		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
305 				"1808 Create VPORT failed: "
306 				"NPIV is not enabled: SLImode:%d\n",
307 				phba->sli_rev);
308 		rc = VPORT_INVAL;
309 		goto error_out;
310 	}
311 
312 	vpi = lpfc_alloc_vpi(phba);
313 	if (vpi == 0) {
314 		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
315 				"1809 Create VPORT failed: "
316 				"Max VPORTs (%d) exceeded\n",
317 				phba->max_vpi);
318 		rc = VPORT_NORESOURCES;
319 		goto error_out;
320 	}
321 
322 	/* Assign an unused board number */
323 	if ((instance = lpfc_get_instance()) < 0) {
324 		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
325 				"1810 Create VPORT failed: Cannot get "
326 				"instance number\n");
327 		lpfc_free_vpi(phba, vpi);
328 		rc = VPORT_NORESOURCES;
329 		goto error_out;
330 	}
331 
332 	vport = lpfc_create_port(phba, instance, &fc_vport->dev);
333 	if (!vport) {
334 		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
335 				"1811 Create VPORT failed: vpi x%x\n", vpi);
336 		lpfc_free_vpi(phba, vpi);
337 		rc = VPORT_NORESOURCES;
338 		goto error_out;
339 	}
340 
341 	vport->vpi = vpi;
342 	lpfc_debugfs_initialize(vport);
343 
344 	if ((status = lpfc_vport_sparm(phba, vport))) {
345 		if (status == -EINTR) {
346 			lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
347 					 "1831 Create VPORT Interrupted.\n");
348 			rc = VPORT_ERROR;
349 		} else {
350 			lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
351 					 "1813 Create VPORT failed. "
352 					 "Cannot get sparam\n");
353 			rc = VPORT_NORESOURCES;
354 		}
355 		lpfc_free_vpi(phba, vpi);
356 		destroy_port(vport);
357 		goto error_out;
358 	}
359 
360 	u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn);
361 	u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn);
362 
363 	memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8);
364 	memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8);
365 
366 	if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") ||
367 	    !lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) {
368 		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
369 				 "1821 Create VPORT failed. "
370 				 "Invalid WWN format\n");
371 		lpfc_free_vpi(phba, vpi);
372 		destroy_port(vport);
373 		rc = VPORT_INVAL;
374 		goto error_out;
375 	}
376 
377 	if (!lpfc_unique_wwpn(phba, vport)) {
378 		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
379 				 "1823 Create VPORT failed. "
380 				 "Duplicate WWN on HBA\n");
381 		lpfc_free_vpi(phba, vpi);
382 		destroy_port(vport);
383 		rc = VPORT_INVAL;
384 		goto error_out;
385 	}
386 
387 	/* Create binary sysfs attribute for vport */
388 	lpfc_alloc_sysfs_attr(vport);
389 
390 	/* Set the DFT_LUN_Q_DEPTH accordingly */
391 	vport->cfg_lun_queue_depth  = phba->pport->cfg_lun_queue_depth;
392 
393 	*(struct lpfc_vport **)fc_vport->dd_data = vport;
394 	vport->fc_vport = fc_vport;
395 
396 	/*
397 	 * In SLI4, the vpi must be activated before it can be used
398 	 * by the port.
399 	 */
400 	if ((phba->sli_rev == LPFC_SLI_REV4) &&
401 	    (pport->fc_flag & FC_VFI_REGISTERED)) {
402 		rc = lpfc_sli4_init_vpi(vport);
403 		if (rc) {
404 			lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
405 					"1838 Failed to INIT_VPI on vpi %d "
406 					"status %d\n", vpi, rc);
407 			rc = VPORT_NORESOURCES;
408 			lpfc_free_vpi(phba, vpi);
409 			goto error_out;
410 		}
411 	} else if (phba->sli_rev == LPFC_SLI_REV4) {
412 		/*
413 		 * Driver cannot INIT_VPI now. Set the flags to
414 		 * init_vpi when reg_vfi complete.
415 		 */
416 		vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
417 		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
418 		rc = VPORT_OK;
419 		goto out;
420 	}
421 
422 	if ((phba->link_state < LPFC_LINK_UP) ||
423 	    (pport->port_state < LPFC_FABRIC_CFG_LINK) ||
424 	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
425 		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
426 		rc = VPORT_OK;
427 		goto out;
428 	}
429 
430 	if (disable) {
431 		lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
432 		rc = VPORT_OK;
433 		goto out;
434 	}
435 
436 	/* Use the Physical nodes Fabric NDLP to determine if the link is
437 	 * up and ready to FDISC.
438 	 */
439 	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
440 	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
441 	    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
442 		if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
443 			lpfc_set_disctmo(vport);
444 			lpfc_initial_fdisc(vport);
445 		} else {
446 			lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
447 			lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
448 					 "0262 No NPIV Fabric support\n");
449 		}
450 	} else {
451 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
452 	}
453 	rc = VPORT_OK;
454 
455 out:
456 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
457 			"1825 Vport Created.\n");
458 	lpfc_host_attrib_init(lpfc_shost_from_vport(vport));
459 error_out:
460 	return rc;
461 }
462 
463 static int
464 disable_vport(struct fc_vport *fc_vport)
465 {
466 	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
467 	struct lpfc_hba   *phba = vport->phba;
468 	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
469 	long timeout;
470 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
471 
472 	ndlp = lpfc_findnode_did(vport, Fabric_DID);
473 	if (ndlp && NLP_CHK_NODE_ACT(ndlp)
474 	    && phba->link_state >= LPFC_LINK_UP) {
475 		vport->unreg_vpi_cmpl = VPORT_INVAL;
476 		timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
477 		if (!lpfc_issue_els_npiv_logo(vport, ndlp))
478 			while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
479 				timeout = schedule_timeout(timeout);
480 	}
481 
482 	lpfc_sli_host_down(vport);
483 
484 	/* Mark all nodes for discovery so we can remove them by
485 	 * calling lpfc_cleanup_rpis(vport, 1)
486 	 */
487 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
488 		if (!NLP_CHK_NODE_ACT(ndlp))
489 			continue;
490 		if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
491 			continue;
492 		lpfc_disc_state_machine(vport, ndlp, NULL,
493 					NLP_EVT_DEVICE_RECOVERY);
494 	}
495 	lpfc_cleanup_rpis(vport, 1);
496 
497 	lpfc_stop_vport_timers(vport);
498 	lpfc_unreg_all_rpis(vport);
499 	lpfc_unreg_default_rpis(vport);
500 	/*
501 	 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the
502 	 * scsi_host_put() to release the vport.
503 	 */
504 	lpfc_mbx_unreg_vpi(vport);
505 	spin_lock_irq(shost->host_lock);
506 	vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
507 	spin_unlock_irq(shost->host_lock);
508 
509 	lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
510 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
511 			 "1826 Vport Disabled.\n");
512 	return VPORT_OK;
513 }
514 
515 static int
516 enable_vport(struct fc_vport *fc_vport)
517 {
518 	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
519 	struct lpfc_hba   *phba = vport->phba;
520 	struct lpfc_nodelist *ndlp = NULL;
521 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
522 
523 	if ((phba->link_state < LPFC_LINK_UP) ||
524 	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
525 		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
526 		return VPORT_OK;
527 	}
528 
529 	spin_lock_irq(shost->host_lock);
530 	vport->load_flag |= FC_LOADING;
531 	vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
532 	spin_unlock_irq(shost->host_lock);
533 
534 	/* Use the Physical nodes Fabric NDLP to determine if the link is
535 	 * up and ready to FDISC.
536 	 */
537 	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
538 	if (ndlp && NLP_CHK_NODE_ACT(ndlp)
539 	    && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
540 		if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
541 			lpfc_set_disctmo(vport);
542 			lpfc_initial_fdisc(vport);
543 		} else {
544 			lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
545 			lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
546 					 "0264 No NPIV Fabric support\n");
547 		}
548 	} else {
549 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
550 	}
551 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
552 			 "1827 Vport Enabled.\n");
553 	return VPORT_OK;
554 }
555 
556 int
557 lpfc_vport_disable(struct fc_vport *fc_vport, bool disable)
558 {
559 	if (disable)
560 		return disable_vport(fc_vport);
561 	else
562 		return enable_vport(fc_vport);
563 }
564 
565 
566 int
567 lpfc_vport_delete(struct fc_vport *fc_vport)
568 {
569 	struct lpfc_nodelist *ndlp = NULL;
570 	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
571 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
572 	struct lpfc_hba   *phba = vport->phba;
573 	long timeout;
574 	bool ns_ndlp_referenced = false;
575 
576 	if (vport->port_type == LPFC_PHYSICAL_PORT) {
577 		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
578 				 "1812 vport_delete failed: Cannot delete "
579 				 "physical host\n");
580 		return VPORT_ERROR;
581 	}
582 
583 	/* If the vport is a static vport fail the deletion. */
584 	if ((vport->vport_flag & STATIC_VPORT) &&
585 		!(phba->pport->load_flag & FC_UNLOADING)) {
586 		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
587 				 "1837 vport_delete failed: Cannot delete "
588 				 "static vport.\n");
589 		return VPORT_ERROR;
590 	}
591 	spin_lock_irq(&phba->hbalock);
592 	vport->load_flag |= FC_UNLOADING;
593 	spin_unlock_irq(&phba->hbalock);
594 	/*
595 	 * If we are not unloading the driver then prevent the vport_delete
596 	 * from happening until after this vport's discovery is finished.
597 	 */
598 	if (!(phba->pport->load_flag & FC_UNLOADING)) {
599 		int check_count = 0;
600 		while (check_count < ((phba->fc_ratov * 3) + 3) &&
601 		       vport->port_state > LPFC_VPORT_FAILED &&
602 		       vport->port_state < LPFC_VPORT_READY) {
603 			check_count++;
604 			msleep(1000);
605 		}
606 		if (vport->port_state > LPFC_VPORT_FAILED &&
607 		    vport->port_state < LPFC_VPORT_READY)
608 			return -EAGAIN;
609 	}
610 	/*
611 	 * This is a bit of a mess.  We want to ensure the shost doesn't get
612 	 * torn down until we're done with the embedded lpfc_vport structure.
613 	 *
614 	 * Beyond holding a reference for this function, we also need a
615 	 * reference for outstanding I/O requests we schedule during delete
616 	 * processing.  But once we scsi_remove_host() we can no longer obtain
617 	 * a reference through scsi_host_get().
618 	 *
619 	 * So we take two references here.  We release one reference at the
620 	 * bottom of the function -- after delinking the vport.  And we
621 	 * release the other at the completion of the unreg_vpi that get's
622 	 * initiated after we've disposed of all other resources associated
623 	 * with the port.
624 	 */
625 	if (!scsi_host_get(shost))
626 		return VPORT_INVAL;
627 	if (!scsi_host_get(shost)) {
628 		scsi_host_put(shost);
629 		return VPORT_INVAL;
630 	}
631 	lpfc_free_sysfs_attr(vport);
632 
633 	lpfc_debugfs_terminate(vport);
634 
635 	/*
636 	 * The call to fc_remove_host might release the NameServer ndlp. Since
637 	 * we might need to use the ndlp to send the DA_ID CT command,
638 	 * increment the reference for the NameServer ndlp to prevent it from
639 	 * being released.
640 	 */
641 	ndlp = lpfc_findnode_did(vport, NameServer_DID);
642 	if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
643 		lpfc_nlp_get(ndlp);
644 		ns_ndlp_referenced = true;
645 	}
646 
647 	/* Remove FC host and then SCSI host with the vport */
648 	fc_remove_host(shost);
649 	scsi_remove_host(shost);
650 
651 	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
652 
653 	/* In case of driver unload, we shall not perform fabric logo as the
654 	 * worker thread already stopped at this stage and, in this case, we
655 	 * can safely skip the fabric logo.
656 	 */
657 	if (phba->pport->load_flag & FC_UNLOADING) {
658 		if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
659 		    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
660 		    phba->link_state >= LPFC_LINK_UP) {
661 			/* First look for the Fabric ndlp */
662 			ndlp = lpfc_findnode_did(vport, Fabric_DID);
663 			if (!ndlp)
664 				goto skip_logo;
665 			else if (!NLP_CHK_NODE_ACT(ndlp)) {
666 				ndlp = lpfc_enable_node(vport, ndlp,
667 							NLP_STE_UNUSED_NODE);
668 				if (!ndlp)
669 					goto skip_logo;
670 			}
671 			/* Remove ndlp from vport npld list */
672 			lpfc_dequeue_node(vport, ndlp);
673 
674 			/* Indicate free memory when release */
675 			spin_lock_irq(&phba->ndlp_lock);
676 			NLP_SET_FREE_REQ(ndlp);
677 			spin_unlock_irq(&phba->ndlp_lock);
678 			/* Kick off release ndlp when it can be safely done */
679 			lpfc_nlp_put(ndlp);
680 		}
681 		goto skip_logo;
682 	}
683 
684 	/* Otherwise, we will perform fabric logo as needed */
685 	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
686 	    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
687 	    phba->link_state >= LPFC_LINK_UP &&
688 	    phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
689 		if (vport->cfg_enable_da_id) {
690 			timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
691 			if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0))
692 				while (vport->ct_flags && timeout)
693 					timeout = schedule_timeout(timeout);
694 			else
695 				lpfc_printf_log(vport->phba, KERN_WARNING,
696 						LOG_VPORT,
697 						"1829 CT command failed to "
698 						"delete objects on fabric\n");
699 		}
700 		/* First look for the Fabric ndlp */
701 		ndlp = lpfc_findnode_did(vport, Fabric_DID);
702 		if (!ndlp) {
703 			/* Cannot find existing Fabric ndlp, allocate one */
704 			ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL);
705 			if (!ndlp)
706 				goto skip_logo;
707 			lpfc_nlp_init(vport, ndlp, Fabric_DID);
708 			/* Indicate free memory when release */
709 			NLP_SET_FREE_REQ(ndlp);
710 		} else {
711 			if (!NLP_CHK_NODE_ACT(ndlp)) {
712 				ndlp = lpfc_enable_node(vport, ndlp,
713 						NLP_STE_UNUSED_NODE);
714 				if (!ndlp)
715 					goto skip_logo;
716 			}
717 
718 			/* Remove ndlp from vport list */
719 			lpfc_dequeue_node(vport, ndlp);
720 			spin_lock_irq(&phba->ndlp_lock);
721 			if (!NLP_CHK_FREE_REQ(ndlp))
722 				/* Indicate free memory when release */
723 				NLP_SET_FREE_REQ(ndlp);
724 			else {
725 				/* Skip this if ndlp is already in free mode */
726 				spin_unlock_irq(&phba->ndlp_lock);
727 				goto skip_logo;
728 			}
729 			spin_unlock_irq(&phba->ndlp_lock);
730 		}
731 
732 		/*
733 		 * If the vpi is not registered, then a valid FDISC doesn't
734 		 * exist and there is no need for a ELS LOGO.  Just cleanup
735 		 * the ndlp.
736 		 */
737 		if (!(vport->vpi_state & LPFC_VPI_REGISTERED)) {
738 			lpfc_nlp_put(ndlp);
739 			goto skip_logo;
740 		}
741 
742 		vport->unreg_vpi_cmpl = VPORT_INVAL;
743 		timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
744 		if (!lpfc_issue_els_npiv_logo(vport, ndlp))
745 			while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
746 				timeout = schedule_timeout(timeout);
747 	}
748 
749 	if (!(phba->pport->load_flag & FC_UNLOADING))
750 		lpfc_discovery_wait(vport);
751 
752 skip_logo:
753 
754 	/*
755 	 * If the NameServer ndlp has been incremented to allow the DA_ID CT
756 	 * command to be sent, decrement the ndlp now.
757 	 */
758 	if (ns_ndlp_referenced) {
759 		ndlp = lpfc_findnode_did(vport, NameServer_DID);
760 		lpfc_nlp_put(ndlp);
761 	}
762 
763 	lpfc_cleanup(vport);
764 	lpfc_sli_host_down(vport);
765 
766 	lpfc_stop_vport_timers(vport);
767 
768 	if (!(phba->pport->load_flag & FC_UNLOADING)) {
769 		lpfc_unreg_all_rpis(vport);
770 		lpfc_unreg_default_rpis(vport);
771 		/*
772 		 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi)
773 		 * does the scsi_host_put() to release the vport.
774 		 */
775 		if (!(vport->vpi_state & LPFC_VPI_REGISTERED) ||
776 				lpfc_mbx_unreg_vpi(vport))
777 			scsi_host_put(shost);
778 	} else
779 		scsi_host_put(shost);
780 
781 	lpfc_free_vpi(phba, vport->vpi);
782 	vport->work_port_events = 0;
783 	spin_lock_irq(&phba->hbalock);
784 	list_del_init(&vport->listentry);
785 	spin_unlock_irq(&phba->hbalock);
786 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
787 			 "1828 Vport Deleted.\n");
788 	scsi_host_put(shost);
789 	return VPORT_OK;
790 }
791 
792 struct lpfc_vport **
793 lpfc_create_vport_work_array(struct lpfc_hba *phba)
794 {
795 	struct lpfc_vport *port_iterator;
796 	struct lpfc_vport **vports;
797 	int index = 0;
798 	vports = kzalloc((phba->max_vports + 1) * sizeof(struct lpfc_vport *),
799 			 GFP_KERNEL);
800 	if (vports == NULL)
801 		return NULL;
802 	spin_lock_irq(&phba->hbalock);
803 	list_for_each_entry(port_iterator, &phba->port_list, listentry) {
804 		if (port_iterator->load_flag & FC_UNLOADING)
805 			continue;
806 		if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) {
807 			lpfc_printf_vlog(port_iterator, KERN_ERR, LOG_VPORT,
808 					 "1801 Create vport work array FAILED: "
809 					 "cannot do scsi_host_get\n");
810 			continue;
811 		}
812 		vports[index++] = port_iterator;
813 	}
814 	spin_unlock_irq(&phba->hbalock);
815 	return vports;
816 }
817 
818 void
819 lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
820 {
821 	int i;
822 	if (vports == NULL)
823 		return;
824 	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
825 		scsi_host_put(lpfc_shost_from_vport(vports[i]));
826 	kfree(vports);
827 }
828 
829 
830 /**
831  * lpfc_vport_reset_stat_data - Reset the statistical data for the vport
832  * @vport: Pointer to vport object.
833  *
834  * This function resets the statistical data for the vport. This function
835  * is called with the host_lock held
836  **/
837 void
838 lpfc_vport_reset_stat_data(struct lpfc_vport *vport)
839 {
840 	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
841 
842 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
843 		if (!NLP_CHK_NODE_ACT(ndlp))
844 			continue;
845 		if (ndlp->lat_data)
846 			memset(ndlp->lat_data, 0, LPFC_MAX_BUCKET_COUNT *
847 				sizeof(struct lpfc_scsicmd_bkt));
848 	}
849 }
850 
851 
852 /**
853  * lpfc_alloc_bucket - Allocate data buffer required for statistical data
854  * @vport: Pointer to vport object.
855  *
856  * This function allocates data buffer required for all the FC
857  * nodes of the vport to collect statistical data.
858  **/
859 void
860 lpfc_alloc_bucket(struct lpfc_vport *vport)
861 {
862 	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
863 
864 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
865 		if (!NLP_CHK_NODE_ACT(ndlp))
866 			continue;
867 
868 		kfree(ndlp->lat_data);
869 		ndlp->lat_data = NULL;
870 
871 		if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) {
872 			ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT,
873 					 sizeof(struct lpfc_scsicmd_bkt),
874 					 GFP_ATOMIC);
875 
876 			if (!ndlp->lat_data)
877 				lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE,
878 					"0287 lpfc_alloc_bucket failed to "
879 					"allocate statistical data buffer DID "
880 					"0x%x\n", ndlp->nlp_DID);
881 		}
882 	}
883 }
884 
885 /**
886  * lpfc_free_bucket - Free data buffer required for statistical data
887  * @vport: Pointer to vport object.
888  *
889  * Th function frees statistical data buffer of all the FC
890  * nodes of the vport.
891  **/
892 void
893 lpfc_free_bucket(struct lpfc_vport *vport)
894 {
895 	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
896 
897 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
898 		if (!NLP_CHK_NODE_ACT(ndlp))
899 			continue;
900 
901 		kfree(ndlp->lat_data);
902 		ndlp->lat_data = NULL;
903 	}
904 }
905