1 /******************************************************************* 2 * This file is part of the Emulex Linux Device Driver for * 3 * Fibre Channel Host Bus Adapters. * 4 * Copyright (C) 2004-2008 Emulex. All rights reserved. * 5 * EMULEX and SLI are trademarks of Emulex. * 6 * www.emulex.com * 7 * Portions Copyright (C) 2004-2005 Christoph Hellwig * 8 * * 9 * This program is free software; you can redistribute it and/or * 10 * modify it under the terms of version 2 of the GNU General * 11 * Public License as published by the Free Software Foundation. * 12 * This program is distributed in the hope that it will be useful. * 13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * 14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * 15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * 16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * 17 * TO BE LEGALLY INVALID. See the GNU General Public License for * 18 * more details, a copy of which can be found in the file COPYING * 19 * included with this package. * 20 *******************************************************************/ 21 22 #include <linux/blkdev.h> 23 #include <linux/delay.h> 24 #include <linux/dma-mapping.h> 25 #include <linux/idr.h> 26 #include <linux/interrupt.h> 27 #include <linux/kthread.h> 28 #include <linux/pci.h> 29 #include <linux/slab.h> 30 #include <linux/spinlock.h> 31 32 #include <scsi/scsi.h> 33 #include <scsi/scsi_device.h> 34 #include <scsi/scsi_host.h> 35 #include <scsi/scsi_transport_fc.h> 36 #include "lpfc_hw4.h" 37 #include "lpfc_hw.h" 38 #include "lpfc_sli.h" 39 #include "lpfc_sli4.h" 40 #include "lpfc_nl.h" 41 #include "lpfc_disc.h" 42 #include "lpfc_scsi.h" 43 #include "lpfc.h" 44 #include "lpfc_logmsg.h" 45 #include "lpfc_crtn.h" 46 #include "lpfc_version.h" 47 #include "lpfc_vport.h" 48 49 inline void lpfc_vport_set_state(struct lpfc_vport *vport, 50 enum fc_vport_state new_state) 51 { 52 struct fc_vport *fc_vport = vport->fc_vport; 53 54 if (fc_vport) { 55 /* 56 * When the transport defines fc_vport_set state we will replace 57 * this code with the following line 58 */ 59 /* fc_vport_set_state(fc_vport, new_state); */ 60 if (new_state != FC_VPORT_INITIALIZING) 61 fc_vport->vport_last_state = fc_vport->vport_state; 62 fc_vport->vport_state = new_state; 63 } 64 65 /* for all the error states we will set the invternal state to FAILED */ 66 switch (new_state) { 67 case FC_VPORT_NO_FABRIC_SUPP: 68 case FC_VPORT_NO_FABRIC_RSCS: 69 case FC_VPORT_FABRIC_LOGOUT: 70 case FC_VPORT_FABRIC_REJ_WWN: 71 case FC_VPORT_FAILED: 72 vport->port_state = LPFC_VPORT_FAILED; 73 break; 74 case FC_VPORT_LINKDOWN: 75 vport->port_state = LPFC_VPORT_UNKNOWN; 76 break; 77 default: 78 /* do nothing */ 79 break; 80 } 81 } 82 83 static int 84 lpfc_alloc_vpi(struct lpfc_hba *phba) 85 { 86 int vpi; 87 88 spin_lock_irq(&phba->hbalock); 89 /* Start at bit 1 because vpi zero is reserved for the physical port */ 90 vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1); 91 if (vpi > phba->max_vpi) 92 vpi = 0; 93 else 94 set_bit(vpi, phba->vpi_bmask); 95 if (phba->sli_rev == LPFC_SLI_REV4) 96 phba->sli4_hba.max_cfg_param.vpi_used++; 97 spin_unlock_irq(&phba->hbalock); 98 return vpi; 99 } 100 101 static void 102 lpfc_free_vpi(struct lpfc_hba *phba, int vpi) 103 { 104 if (vpi == 0) 105 return; 106 spin_lock_irq(&phba->hbalock); 107 clear_bit(vpi, phba->vpi_bmask); 108 if (phba->sli_rev == LPFC_SLI_REV4) 109 phba->sli4_hba.max_cfg_param.vpi_used--; 110 spin_unlock_irq(&phba->hbalock); 111 } 112 113 static int 114 lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport) 115 { 116 LPFC_MBOXQ_t *pmb; 117 MAILBOX_t *mb; 118 struct lpfc_dmabuf *mp; 119 int rc; 120 121 pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 122 if (!pmb) { 123 return -ENOMEM; 124 } 125 mb = &pmb->u.mb; 126 127 rc = lpfc_read_sparam(phba, pmb, vport->vpi); 128 if (rc) { 129 mempool_free(pmb, phba->mbox_mem_pool); 130 return -ENOMEM; 131 } 132 133 /* 134 * Grab buffer pointer and clear context1 so we can use 135 * lpfc_sli_issue_box_wait 136 */ 137 mp = (struct lpfc_dmabuf *) pmb->context1; 138 pmb->context1 = NULL; 139 140 pmb->vport = vport; 141 rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2); 142 if (rc != MBX_SUCCESS) { 143 if (signal_pending(current)) { 144 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT, 145 "1830 Signal aborted mbxCmd x%x\n", 146 mb->mbxCommand); 147 lpfc_mbuf_free(phba, mp->virt, mp->phys); 148 kfree(mp); 149 if (rc != MBX_TIMEOUT) 150 mempool_free(pmb, phba->mbox_mem_pool); 151 return -EINTR; 152 } else { 153 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT, 154 "1818 VPort failed init, mbxCmd x%x " 155 "READ_SPARM mbxStatus x%x, rc = x%x\n", 156 mb->mbxCommand, mb->mbxStatus, rc); 157 lpfc_mbuf_free(phba, mp->virt, mp->phys); 158 kfree(mp); 159 if (rc != MBX_TIMEOUT) 160 mempool_free(pmb, phba->mbox_mem_pool); 161 return -EIO; 162 } 163 } 164 165 memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm)); 166 memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, 167 sizeof (struct lpfc_name)); 168 memcpy(&vport->fc_portname, &vport->fc_sparam.portName, 169 sizeof (struct lpfc_name)); 170 171 lpfc_mbuf_free(phba, mp->virt, mp->phys); 172 kfree(mp); 173 mempool_free(pmb, phba->mbox_mem_pool); 174 175 return 0; 176 } 177 178 static int 179 lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn, 180 const char *name_type) 181 { 182 /* ensure that IEEE format 1 addresses 183 * contain zeros in bits 59-48 184 */ 185 if (!((wwn->u.wwn[0] >> 4) == 1 && 186 ((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0))) 187 return 1; 188 189 lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, 190 "1822 Invalid %s: %02x:%02x:%02x:%02x:" 191 "%02x:%02x:%02x:%02x\n", 192 name_type, 193 wwn->u.wwn[0], wwn->u.wwn[1], 194 wwn->u.wwn[2], wwn->u.wwn[3], 195 wwn->u.wwn[4], wwn->u.wwn[5], 196 wwn->u.wwn[6], wwn->u.wwn[7]); 197 return 0; 198 } 199 200 static int 201 lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport) 202 { 203 struct lpfc_vport *vport; 204 unsigned long flags; 205 206 spin_lock_irqsave(&phba->hbalock, flags); 207 list_for_each_entry(vport, &phba->port_list, listentry) { 208 if (vport == new_vport) 209 continue; 210 /* If they match, return not unique */ 211 if (memcmp(&vport->fc_sparam.portName, 212 &new_vport->fc_sparam.portName, 213 sizeof(struct lpfc_name)) == 0) { 214 spin_unlock_irqrestore(&phba->hbalock, flags); 215 return 0; 216 } 217 } 218 spin_unlock_irqrestore(&phba->hbalock, flags); 219 return 1; 220 } 221 222 /** 223 * lpfc_discovery_wait - Wait for driver discovery to quiesce 224 * @vport: The virtual port for which this call is being executed. 225 * 226 * This driver calls this routine specifically from lpfc_vport_delete 227 * to enforce a synchronous execution of vport 228 * delete relative to discovery activities. The 229 * lpfc_vport_delete routine should not return until it 230 * can reasonably guarantee that discovery has quiesced. 231 * Post FDISC LOGO, the driver must wait until its SAN teardown is 232 * complete and all resources recovered before allowing 233 * cleanup. 234 * 235 * This routine does not require any locks held. 236 **/ 237 static void lpfc_discovery_wait(struct lpfc_vport *vport) 238 { 239 struct lpfc_hba *phba = vport->phba; 240 uint32_t wait_flags = 0; 241 unsigned long wait_time_max; 242 unsigned long start_time; 243 244 wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE | 245 FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO; 246 247 /* 248 * The time constraint on this loop is a balance between the 249 * fabric RA_TOV value and dev_loss tmo. The driver's 250 * devloss_tmo is 10 giving this loop a 3x multiplier minimally. 251 */ 252 wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000); 253 wait_time_max += jiffies; 254 start_time = jiffies; 255 while (time_before(jiffies, wait_time_max)) { 256 if ((vport->num_disc_nodes > 0) || 257 (vport->fc_flag & wait_flags) || 258 ((vport->port_state > LPFC_VPORT_FAILED) && 259 (vport->port_state < LPFC_VPORT_READY))) { 260 lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT, 261 "1833 Vport discovery quiesce Wait:" 262 " state x%x fc_flags x%x" 263 " num_nodes x%x, waiting 1000 msecs" 264 " total wait msecs x%x\n", 265 vport->port_state, vport->fc_flag, 266 vport->num_disc_nodes, 267 jiffies_to_msecs(jiffies - start_time)); 268 msleep(1000); 269 } else { 270 /* Base case. Wait variants satisfied. Break out */ 271 lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT, 272 "1834 Vport discovery quiesced:" 273 " state x%x fc_flags x%x" 274 " wait msecs x%x\n", 275 vport->port_state, vport->fc_flag, 276 jiffies_to_msecs(jiffies 277 - start_time)); 278 break; 279 } 280 } 281 282 if (time_after(jiffies, wait_time_max)) 283 lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, 284 "1835 Vport discovery quiesce failed:" 285 " state x%x fc_flags x%x wait msecs x%x\n", 286 vport->port_state, vport->fc_flag, 287 jiffies_to_msecs(jiffies - start_time)); 288 } 289 290 int 291 lpfc_vport_create(struct fc_vport *fc_vport, bool disable) 292 { 293 struct lpfc_nodelist *ndlp; 294 struct Scsi_Host *shost = fc_vport->shost; 295 struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata; 296 struct lpfc_hba *phba = pport->phba; 297 struct lpfc_vport *vport = NULL; 298 int instance; 299 int vpi; 300 int rc = VPORT_ERROR; 301 int status; 302 303 if ((phba->sli_rev < 3) || !(phba->cfg_enable_npiv)) { 304 lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, 305 "1808 Create VPORT failed: " 306 "NPIV is not enabled: SLImode:%d\n", 307 phba->sli_rev); 308 rc = VPORT_INVAL; 309 goto error_out; 310 } 311 312 vpi = lpfc_alloc_vpi(phba); 313 if (vpi == 0) { 314 lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, 315 "1809 Create VPORT failed: " 316 "Max VPORTs (%d) exceeded\n", 317 phba->max_vpi); 318 rc = VPORT_NORESOURCES; 319 goto error_out; 320 } 321 322 /* Assign an unused board number */ 323 if ((instance = lpfc_get_instance()) < 0) { 324 lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, 325 "1810 Create VPORT failed: Cannot get " 326 "instance number\n"); 327 lpfc_free_vpi(phba, vpi); 328 rc = VPORT_NORESOURCES; 329 goto error_out; 330 } 331 332 vport = lpfc_create_port(phba, instance, &fc_vport->dev); 333 if (!vport) { 334 lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, 335 "1811 Create VPORT failed: vpi x%x\n", vpi); 336 lpfc_free_vpi(phba, vpi); 337 rc = VPORT_NORESOURCES; 338 goto error_out; 339 } 340 341 vport->vpi = vpi; 342 lpfc_debugfs_initialize(vport); 343 344 if ((status = lpfc_vport_sparm(phba, vport))) { 345 if (status == -EINTR) { 346 lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, 347 "1831 Create VPORT Interrupted.\n"); 348 rc = VPORT_ERROR; 349 } else { 350 lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, 351 "1813 Create VPORT failed. " 352 "Cannot get sparam\n"); 353 rc = VPORT_NORESOURCES; 354 } 355 lpfc_free_vpi(phba, vpi); 356 destroy_port(vport); 357 goto error_out; 358 } 359 360 u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn); 361 u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn); 362 363 memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8); 364 memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8); 365 366 if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") || 367 !lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) { 368 lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, 369 "1821 Create VPORT failed. " 370 "Invalid WWN format\n"); 371 lpfc_free_vpi(phba, vpi); 372 destroy_port(vport); 373 rc = VPORT_INVAL; 374 goto error_out; 375 } 376 377 if (!lpfc_unique_wwpn(phba, vport)) { 378 lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, 379 "1823 Create VPORT failed. " 380 "Duplicate WWN on HBA\n"); 381 lpfc_free_vpi(phba, vpi); 382 destroy_port(vport); 383 rc = VPORT_INVAL; 384 goto error_out; 385 } 386 387 /* Create binary sysfs attribute for vport */ 388 lpfc_alloc_sysfs_attr(vport); 389 390 *(struct lpfc_vport **)fc_vport->dd_data = vport; 391 vport->fc_vport = fc_vport; 392 393 /* 394 * In SLI4, the vpi must be activated before it can be used 395 * by the port. 396 */ 397 if ((phba->sli_rev == LPFC_SLI_REV4) && 398 (pport->fc_flag & FC_VFI_REGISTERED)) { 399 rc = lpfc_sli4_init_vpi(vport); 400 if (rc) { 401 lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, 402 "1838 Failed to INIT_VPI on vpi %d " 403 "status %d\n", vpi, rc); 404 rc = VPORT_NORESOURCES; 405 lpfc_free_vpi(phba, vpi); 406 goto error_out; 407 } 408 } else if (phba->sli_rev == LPFC_SLI_REV4) { 409 /* 410 * Driver cannot INIT_VPI now. Set the flags to 411 * init_vpi when reg_vfi complete. 412 */ 413 vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; 414 lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); 415 rc = VPORT_OK; 416 goto out; 417 } 418 419 if ((phba->link_state < LPFC_LINK_UP) || 420 (pport->port_state < LPFC_FABRIC_CFG_LINK) || 421 (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) { 422 lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); 423 rc = VPORT_OK; 424 goto out; 425 } 426 427 if (disable) { 428 lpfc_vport_set_state(vport, FC_VPORT_DISABLED); 429 rc = VPORT_OK; 430 goto out; 431 } 432 433 /* Use the Physical nodes Fabric NDLP to determine if the link is 434 * up and ready to FDISC. 435 */ 436 ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); 437 if (ndlp && NLP_CHK_NODE_ACT(ndlp) && 438 ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { 439 if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) { 440 lpfc_set_disctmo(vport); 441 lpfc_initial_fdisc(vport); 442 } else { 443 lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); 444 lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, 445 "0262 No NPIV Fabric support\n"); 446 } 447 } else { 448 lpfc_vport_set_state(vport, FC_VPORT_FAILED); 449 } 450 rc = VPORT_OK; 451 452 out: 453 lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, 454 "1825 Vport Created.\n"); 455 lpfc_host_attrib_init(lpfc_shost_from_vport(vport)); 456 error_out: 457 return rc; 458 } 459 460 static int 461 disable_vport(struct fc_vport *fc_vport) 462 { 463 struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; 464 struct lpfc_hba *phba = vport->phba; 465 struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; 466 long timeout; 467 468 ndlp = lpfc_findnode_did(vport, Fabric_DID); 469 if (ndlp && NLP_CHK_NODE_ACT(ndlp) 470 && phba->link_state >= LPFC_LINK_UP) { 471 vport->unreg_vpi_cmpl = VPORT_INVAL; 472 timeout = msecs_to_jiffies(phba->fc_ratov * 2000); 473 if (!lpfc_issue_els_npiv_logo(vport, ndlp)) 474 while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout) 475 timeout = schedule_timeout(timeout); 476 } 477 478 lpfc_sli_host_down(vport); 479 480 /* Mark all nodes for discovery so we can remove them by 481 * calling lpfc_cleanup_rpis(vport, 1) 482 */ 483 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { 484 if (!NLP_CHK_NODE_ACT(ndlp)) 485 continue; 486 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) 487 continue; 488 lpfc_disc_state_machine(vport, ndlp, NULL, 489 NLP_EVT_DEVICE_RECOVERY); 490 } 491 lpfc_cleanup_rpis(vport, 1); 492 493 lpfc_stop_vport_timers(vport); 494 lpfc_unreg_all_rpis(vport); 495 lpfc_unreg_default_rpis(vport); 496 /* 497 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the 498 * scsi_host_put() to release the vport. 499 */ 500 lpfc_mbx_unreg_vpi(vport); 501 502 lpfc_vport_set_state(vport, FC_VPORT_DISABLED); 503 lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, 504 "1826 Vport Disabled.\n"); 505 return VPORT_OK; 506 } 507 508 static int 509 enable_vport(struct fc_vport *fc_vport) 510 { 511 struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; 512 struct lpfc_hba *phba = vport->phba; 513 struct lpfc_nodelist *ndlp = NULL; 514 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 515 516 if ((phba->link_state < LPFC_LINK_UP) || 517 (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) { 518 lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); 519 return VPORT_OK; 520 } 521 522 spin_lock_irq(shost->host_lock); 523 vport->load_flag |= FC_LOADING; 524 vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; 525 spin_unlock_irq(shost->host_lock); 526 527 /* Use the Physical nodes Fabric NDLP to determine if the link is 528 * up and ready to FDISC. 529 */ 530 ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); 531 if (ndlp && NLP_CHK_NODE_ACT(ndlp) 532 && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { 533 if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) { 534 lpfc_set_disctmo(vport); 535 lpfc_initial_fdisc(vport); 536 } else { 537 lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); 538 lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, 539 "0264 No NPIV Fabric support\n"); 540 } 541 } else { 542 lpfc_vport_set_state(vport, FC_VPORT_FAILED); 543 } 544 lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, 545 "1827 Vport Enabled.\n"); 546 return VPORT_OK; 547 } 548 549 int 550 lpfc_vport_disable(struct fc_vport *fc_vport, bool disable) 551 { 552 if (disable) 553 return disable_vport(fc_vport); 554 else 555 return enable_vport(fc_vport); 556 } 557 558 559 int 560 lpfc_vport_delete(struct fc_vport *fc_vport) 561 { 562 struct lpfc_nodelist *ndlp = NULL; 563 struct Scsi_Host *shost = (struct Scsi_Host *) fc_vport->shost; 564 struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; 565 struct lpfc_hba *phba = vport->phba; 566 long timeout; 567 568 if (vport->port_type == LPFC_PHYSICAL_PORT) { 569 lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, 570 "1812 vport_delete failed: Cannot delete " 571 "physical host\n"); 572 return VPORT_ERROR; 573 } 574 575 /* If the vport is a static vport fail the deletion. */ 576 if ((vport->vport_flag & STATIC_VPORT) && 577 !(phba->pport->load_flag & FC_UNLOADING)) { 578 lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, 579 "1837 vport_delete failed: Cannot delete " 580 "static vport.\n"); 581 return VPORT_ERROR; 582 } 583 spin_lock_irq(&phba->hbalock); 584 vport->load_flag |= FC_UNLOADING; 585 spin_unlock_irq(&phba->hbalock); 586 /* 587 * If we are not unloading the driver then prevent the vport_delete 588 * from happening until after this vport's discovery is finished. 589 */ 590 if (!(phba->pport->load_flag & FC_UNLOADING)) { 591 int check_count = 0; 592 while (check_count < ((phba->fc_ratov * 3) + 3) && 593 vport->port_state > LPFC_VPORT_FAILED && 594 vport->port_state < LPFC_VPORT_READY) { 595 check_count++; 596 msleep(1000); 597 } 598 if (vport->port_state > LPFC_VPORT_FAILED && 599 vport->port_state < LPFC_VPORT_READY) 600 return -EAGAIN; 601 } 602 /* 603 * This is a bit of a mess. We want to ensure the shost doesn't get 604 * torn down until we're done with the embedded lpfc_vport structure. 605 * 606 * Beyond holding a reference for this function, we also need a 607 * reference for outstanding I/O requests we schedule during delete 608 * processing. But once we scsi_remove_host() we can no longer obtain 609 * a reference through scsi_host_get(). 610 * 611 * So we take two references here. We release one reference at the 612 * bottom of the function -- after delinking the vport. And we 613 * release the other at the completion of the unreg_vpi that get's 614 * initiated after we've disposed of all other resources associated 615 * with the port. 616 */ 617 if (!scsi_host_get(shost)) 618 return VPORT_INVAL; 619 if (!scsi_host_get(shost)) { 620 scsi_host_put(shost); 621 return VPORT_INVAL; 622 } 623 lpfc_free_sysfs_attr(vport); 624 625 lpfc_debugfs_terminate(vport); 626 627 /* Remove FC host and then SCSI host with the vport */ 628 fc_remove_host(lpfc_shost_from_vport(vport)); 629 scsi_remove_host(lpfc_shost_from_vport(vport)); 630 631 ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); 632 633 /* In case of driver unload, we shall not perform fabric logo as the 634 * worker thread already stopped at this stage and, in this case, we 635 * can safely skip the fabric logo. 636 */ 637 if (phba->pport->load_flag & FC_UNLOADING) { 638 if (ndlp && NLP_CHK_NODE_ACT(ndlp) && 639 ndlp->nlp_state == NLP_STE_UNMAPPED_NODE && 640 phba->link_state >= LPFC_LINK_UP) { 641 /* First look for the Fabric ndlp */ 642 ndlp = lpfc_findnode_did(vport, Fabric_DID); 643 if (!ndlp) 644 goto skip_logo; 645 else if (!NLP_CHK_NODE_ACT(ndlp)) { 646 ndlp = lpfc_enable_node(vport, ndlp, 647 NLP_STE_UNUSED_NODE); 648 if (!ndlp) 649 goto skip_logo; 650 } 651 /* Remove ndlp from vport npld list */ 652 lpfc_dequeue_node(vport, ndlp); 653 654 /* Indicate free memory when release */ 655 spin_lock_irq(&phba->ndlp_lock); 656 NLP_SET_FREE_REQ(ndlp); 657 spin_unlock_irq(&phba->ndlp_lock); 658 /* Kick off release ndlp when it can be safely done */ 659 lpfc_nlp_put(ndlp); 660 } 661 goto skip_logo; 662 } 663 664 /* Otherwise, we will perform fabric logo as needed */ 665 if (ndlp && NLP_CHK_NODE_ACT(ndlp) && 666 ndlp->nlp_state == NLP_STE_UNMAPPED_NODE && 667 phba->link_state >= LPFC_LINK_UP && 668 phba->fc_topology != LPFC_TOPOLOGY_LOOP) { 669 if (vport->cfg_enable_da_id) { 670 timeout = msecs_to_jiffies(phba->fc_ratov * 2000); 671 if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0)) 672 while (vport->ct_flags && timeout) 673 timeout = schedule_timeout(timeout); 674 else 675 lpfc_printf_log(vport->phba, KERN_WARNING, 676 LOG_VPORT, 677 "1829 CT command failed to " 678 "delete objects on fabric\n"); 679 } 680 /* First look for the Fabric ndlp */ 681 ndlp = lpfc_findnode_did(vport, Fabric_DID); 682 if (!ndlp) { 683 /* Cannot find existing Fabric ndlp, allocate one */ 684 ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL); 685 if (!ndlp) 686 goto skip_logo; 687 lpfc_nlp_init(vport, ndlp, Fabric_DID); 688 /* Indicate free memory when release */ 689 NLP_SET_FREE_REQ(ndlp); 690 } else { 691 if (!NLP_CHK_NODE_ACT(ndlp)) 692 ndlp = lpfc_enable_node(vport, ndlp, 693 NLP_STE_UNUSED_NODE); 694 if (!ndlp) 695 goto skip_logo; 696 697 /* Remove ndlp from vport npld list */ 698 lpfc_dequeue_node(vport, ndlp); 699 spin_lock_irq(&phba->ndlp_lock); 700 if (!NLP_CHK_FREE_REQ(ndlp)) 701 /* Indicate free memory when release */ 702 NLP_SET_FREE_REQ(ndlp); 703 else { 704 /* Skip this if ndlp is already in free mode */ 705 spin_unlock_irq(&phba->ndlp_lock); 706 goto skip_logo; 707 } 708 spin_unlock_irq(&phba->ndlp_lock); 709 } 710 if (!(vport->vpi_state & LPFC_VPI_REGISTERED)) 711 goto skip_logo; 712 vport->unreg_vpi_cmpl = VPORT_INVAL; 713 timeout = msecs_to_jiffies(phba->fc_ratov * 2000); 714 if (!lpfc_issue_els_npiv_logo(vport, ndlp)) 715 while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout) 716 timeout = schedule_timeout(timeout); 717 } 718 719 if (!(phba->pport->load_flag & FC_UNLOADING)) 720 lpfc_discovery_wait(vport); 721 722 skip_logo: 723 lpfc_cleanup(vport); 724 lpfc_sli_host_down(vport); 725 726 lpfc_stop_vport_timers(vport); 727 728 if (!(phba->pport->load_flag & FC_UNLOADING)) { 729 lpfc_unreg_all_rpis(vport); 730 lpfc_unreg_default_rpis(vport); 731 /* 732 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) 733 * does the scsi_host_put() to release the vport. 734 */ 735 if (lpfc_mbx_unreg_vpi(vport)) 736 scsi_host_put(shost); 737 } else 738 scsi_host_put(shost); 739 740 lpfc_free_vpi(phba, vport->vpi); 741 vport->work_port_events = 0; 742 spin_lock_irq(&phba->hbalock); 743 list_del_init(&vport->listentry); 744 spin_unlock_irq(&phba->hbalock); 745 lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, 746 "1828 Vport Deleted.\n"); 747 scsi_host_put(shost); 748 return VPORT_OK; 749 } 750 751 struct lpfc_vport ** 752 lpfc_create_vport_work_array(struct lpfc_hba *phba) 753 { 754 struct lpfc_vport *port_iterator; 755 struct lpfc_vport **vports; 756 int index = 0; 757 vports = kzalloc((phba->max_vports + 1) * sizeof(struct lpfc_vport *), 758 GFP_KERNEL); 759 if (vports == NULL) 760 return NULL; 761 spin_lock_irq(&phba->hbalock); 762 list_for_each_entry(port_iterator, &phba->port_list, listentry) { 763 if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) { 764 if (!(port_iterator->load_flag & FC_UNLOADING)) 765 lpfc_printf_vlog(port_iterator, KERN_ERR, 766 LOG_VPORT, 767 "1801 Create vport work array FAILED: " 768 "cannot do scsi_host_get\n"); 769 continue; 770 } 771 vports[index++] = port_iterator; 772 } 773 spin_unlock_irq(&phba->hbalock); 774 return vports; 775 } 776 777 void 778 lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports) 779 { 780 int i; 781 if (vports == NULL) 782 return; 783 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) 784 scsi_host_put(lpfc_shost_from_vport(vports[i])); 785 kfree(vports); 786 } 787 788 789 /** 790 * lpfc_vport_reset_stat_data - Reset the statistical data for the vport 791 * @vport: Pointer to vport object. 792 * 793 * This function resets the statistical data for the vport. This function 794 * is called with the host_lock held 795 **/ 796 void 797 lpfc_vport_reset_stat_data(struct lpfc_vport *vport) 798 { 799 struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; 800 801 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { 802 if (!NLP_CHK_NODE_ACT(ndlp)) 803 continue; 804 if (ndlp->lat_data) 805 memset(ndlp->lat_data, 0, LPFC_MAX_BUCKET_COUNT * 806 sizeof(struct lpfc_scsicmd_bkt)); 807 } 808 } 809 810 811 /** 812 * lpfc_alloc_bucket - Allocate data buffer required for statistical data 813 * @vport: Pointer to vport object. 814 * 815 * This function allocates data buffer required for all the FC 816 * nodes of the vport to collect statistical data. 817 **/ 818 void 819 lpfc_alloc_bucket(struct lpfc_vport *vport) 820 { 821 struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; 822 823 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { 824 if (!NLP_CHK_NODE_ACT(ndlp)) 825 continue; 826 827 kfree(ndlp->lat_data); 828 ndlp->lat_data = NULL; 829 830 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) { 831 ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT, 832 sizeof(struct lpfc_scsicmd_bkt), 833 GFP_ATOMIC); 834 835 if (!ndlp->lat_data) 836 lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, 837 "0287 lpfc_alloc_bucket failed to " 838 "allocate statistical data buffer DID " 839 "0x%x\n", ndlp->nlp_DID); 840 } 841 } 842 } 843 844 /** 845 * lpfc_free_bucket - Free data buffer required for statistical data 846 * @vport: Pointer to vport object. 847 * 848 * Th function frees statistical data buffer of all the FC 849 * nodes of the vport. 850 **/ 851 void 852 lpfc_free_bucket(struct lpfc_vport *vport) 853 { 854 struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; 855 856 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { 857 if (!NLP_CHK_NODE_ACT(ndlp)) 858 continue; 859 860 kfree(ndlp->lat_data); 861 ndlp->lat_data = NULL; 862 } 863 } 864