xref: /openbmc/linux/drivers/scsi/lpfc/lpfc_nvme.h (revision 68198dca)
1 /*******************************************************************
2  * This file is part of the Emulex Linux Device Driver for         *
3  * Fibre Channel Host Bus Adapters.                                *
4  * Copyright (C) 2017 Broadcom. All Rights Reserved. The term      *
5  * “Broadcom” refers to Broadcom Limited and/or its subsidiaries.  *
6  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
7  * EMULEX and SLI are trademarks of Emulex.                        *
8  * www.broadcom.com                                                *
9  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
10  *                                                                 *
11  * This program is free software; you can redistribute it and/or   *
12  * modify it under the terms of version 2 of the GNU General       *
13  * Public License as published by the Free Software Foundation.    *
14  * This program is distributed in the hope that it will be useful. *
15  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
16  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
17  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
18  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
19  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
20  * more details, a copy of which can be found in the file COPYING  *
21  * included with this package.                                     *
22  ********************************************************************/
23 
24 #define LPFC_NVME_DEFAULT_SEGS		(64 + 1)	/* 256K IOs */
25 #define LPFC_NVME_WQSIZE		256
26 
27 #define LPFC_NVME_ERSP_LEN		0x20
28 
29 struct lpfc_nvme_qhandle {
30 	uint32_t index;		/* WQ index to use */
31 	uint32_t qidx;		/* queue index passed to create */
32 	uint32_t cpu_id;	/* current cpu id at time of create */
33 };
34 
35 /* Declare nvme-based local and remote port definitions. */
36 struct lpfc_nvme_lport {
37 	struct lpfc_vport *vport;
38 	struct completion lport_unreg_done;
39 	/* Add sttats counters here */
40 };
41 
42 struct lpfc_nvme_rport {
43 	struct lpfc_nvme_lport *lport;
44 	struct nvme_fc_remote_port *remoteport;
45 	struct lpfc_nodelist *ndlp;
46 	struct completion rport_unreg_done;
47 };
48 
49 struct lpfc_nvme_buf {
50 	struct list_head list;
51 	struct nvmefc_fcp_req *nvmeCmd;
52 	struct lpfc_nvme_rport *nrport;
53 	struct lpfc_nodelist *ndlp;
54 
55 	uint32_t timeout;
56 
57 	uint16_t flags;  /* TBD convert exch_busy to flags */
58 #define LPFC_SBUF_XBUSY         0x1     /* SLI4 hba reported XB on WCQE cmpl */
59 	uint16_t exch_busy;     /* SLI4 hba reported XB on complete WCQE */
60 	uint16_t status;	/* From IOCB Word 7- ulpStatus */
61 	uint16_t cpu;
62 	uint16_t qidx;
63 	uint16_t sqid;
64 	uint32_t result;	/* From IOCB Word 4. */
65 
66 	uint32_t   seg_cnt;	/* Number of scatter-gather segments returned by
67 				 * dma_map_sg.  The driver needs this for calls
68 				 * to dma_unmap_sg.
69 				 */
70 	dma_addr_t nonsg_phys;	/* Non scatter-gather physical address. */
71 
72 	/*
73 	 * data and dma_handle are the kernel virtual and bus address of the
74 	 * dma-able buffer containing the fcp_cmd, fcp_rsp and a scatter
75 	 * gather bde list that supports the sg_tablesize value.
76 	 */
77 	void *data;
78 	dma_addr_t dma_handle;
79 
80 	struct sli4_sge *nvme_sgl;
81 	dma_addr_t dma_phys_sgl;
82 
83 	/* cur_iocbq has phys of the dma-able buffer.
84 	 * Iotag is in here
85 	 */
86 	struct lpfc_iocbq cur_iocbq;
87 
88 	wait_queue_head_t *waitq;
89 	unsigned long start_time;
90 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
91 	uint64_t ts_cmd_start;
92 	uint64_t ts_last_cmd;
93 	uint64_t ts_cmd_wqput;
94 	uint64_t ts_isr_cmpl;
95 	uint64_t ts_data_nvme;
96 #endif
97 };
98 
99 struct lpfc_nvme_fcpreq_priv {
100 	struct lpfc_nvme_buf *nvme_buf;
101 };
102