xref: /openbmc/linux/drivers/scsi/lpfc/lpfc_nvme.c (revision d236d361)
1 /*******************************************************************
2  * This file is part of the Emulex Linux Device Driver for         *
3  * Fibre Channel Host Bus Adapters.                                *
4  * Copyright (C) 2017 Broadcom. All Rights Reserved. The term      *
5  * “Broadcom” refers to Broadcom Limited and/or its subsidiaries.  *
6  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
7  * EMULEX and SLI are trademarks of Emulex.                        *
8  * www.broadcom.com                                                *
9  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
10  *                                                                 *
11  * This program is free software; you can redistribute it and/or   *
12  * modify it under the terms of version 2 of the GNU General       *
13  * Public License as published by the Free Software Foundation.    *
14  * This program is distributed in the hope that it will be useful. *
15  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
16  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
17  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
18  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
19  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
20  * more details, a copy of which can be found in the file COPYING  *
21  * included with this package.                                     *
22  ********************************************************************/
23 #include <linux/pci.h>
24 #include <linux/slab.h>
25 #include <linux/interrupt.h>
26 #include <linux/delay.h>
27 #include <asm/unaligned.h>
28 #include <linux/crc-t10dif.h>
29 #include <net/checksum.h>
30 
31 #include <scsi/scsi.h>
32 #include <scsi/scsi_device.h>
33 #include <scsi/scsi_eh.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_tcq.h>
36 #include <scsi/scsi_transport_fc.h>
37 #include <scsi/fc/fc_fs.h>
38 
39 #include <linux/nvme.h>
40 #include <linux/nvme-fc-driver.h>
41 #include <linux/nvme-fc.h>
42 #include "lpfc_version.h"
43 #include "lpfc_hw4.h"
44 #include "lpfc_hw.h"
45 #include "lpfc_sli.h"
46 #include "lpfc_sli4.h"
47 #include "lpfc_nl.h"
48 #include "lpfc_disc.h"
49 #include "lpfc.h"
50 #include "lpfc_nvme.h"
51 #include "lpfc_scsi.h"
52 #include "lpfc_logmsg.h"
53 #include "lpfc_crtn.h"
54 #include "lpfc_vport.h"
55 #include "lpfc_debugfs.h"
56 
57 /* NVME initiator-based functions */
58 
59 static struct lpfc_nvme_buf *
60 lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp);
61 
62 static void
63 lpfc_release_nvme_buf(struct lpfc_hba *, struct lpfc_nvme_buf *);
64 
65 
66 /**
67  * lpfc_nvme_create_queue -
68  * @lpfc_pnvme: Pointer to the driver's nvme instance data
69  * @qidx: An cpu index used to affinitize IO queues and MSIX vectors.
70  * @handle: An opaque driver handle used in follow-up calls.
71  *
72  * Driver registers this routine to preallocate and initialize any
73  * internal data structures to bind the @qidx to its internal IO queues.
74  * A hardware queue maps (qidx) to a specific driver MSI-X vector/EQ/CQ/WQ.
75  *
76  * Return value :
77  *   0 - Success
78  *   -EINVAL - Unsupported input value.
79  *   -ENOMEM - Could not alloc necessary memory
80  **/
81 static int
82 lpfc_nvme_create_queue(struct nvme_fc_local_port *pnvme_lport,
83 		       unsigned int qidx, u16 qsize,
84 		       void **handle)
85 {
86 	struct lpfc_nvme_lport *lport;
87 	struct lpfc_vport *vport;
88 	struct lpfc_nvme_qhandle *qhandle;
89 	char *str;
90 
91 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
92 	vport = lport->vport;
93 	qhandle = kzalloc(sizeof(struct lpfc_nvme_qhandle), GFP_KERNEL);
94 	if (qhandle == NULL)
95 		return -ENOMEM;
96 
97 	qhandle->cpu_id = smp_processor_id();
98 	qhandle->qidx = qidx;
99 	/*
100 	 * NVME qidx == 0 is the admin queue, so both admin queue
101 	 * and first IO queue will use MSI-X vector and associated
102 	 * EQ/CQ/WQ at index 0. After that they are sequentially assigned.
103 	 */
104 	if (qidx) {
105 		str = "IO ";  /* IO queue */
106 		qhandle->index = ((qidx - 1) %
107 			vport->phba->cfg_nvme_io_channel);
108 	} else {
109 		str = "ADM";  /* Admin queue */
110 		qhandle->index = qidx;
111 	}
112 
113 	lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
114 			 "6073 Binding %s HdwQueue %d  (cpu %d) to "
115 			 "io_channel %d qhandle %p\n", str,
116 			 qidx, qhandle->cpu_id, qhandle->index, qhandle);
117 	*handle = (void *)qhandle;
118 	return 0;
119 }
120 
121 /**
122  * lpfc_nvme_delete_queue -
123  * @lpfc_pnvme: Pointer to the driver's nvme instance data
124  * @qidx: An cpu index used to affinitize IO queues and MSIX vectors.
125  * @handle: An opaque driver handle from lpfc_nvme_create_queue
126  *
127  * Driver registers this routine to free
128  * any internal data structures to bind the @qidx to its internal
129  * IO queues.
130  *
131  * Return value :
132  *   0 - Success
133  *   TODO:  What are the failure codes.
134  **/
135 static void
136 lpfc_nvme_delete_queue(struct nvme_fc_local_port *pnvme_lport,
137 		       unsigned int qidx,
138 		       void *handle)
139 {
140 	struct lpfc_nvme_lport *lport;
141 	struct lpfc_vport *vport;
142 
143 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
144 	vport = lport->vport;
145 
146 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
147 			"6001 ENTER.  lpfc_pnvme %p, qidx x%xi qhandle %p\n",
148 			lport, qidx, handle);
149 	kfree(handle);
150 }
151 
152 static void
153 lpfc_nvme_localport_delete(struct nvme_fc_local_port *localport)
154 {
155 	struct lpfc_nvme_lport *lport = localport->private;
156 
157 	/* release any threads waiting for the unreg to complete */
158 	complete(&lport->lport_unreg_done);
159 }
160 
161 /* lpfc_nvme_remoteport_delete
162  *
163  * @remoteport: Pointer to an nvme transport remoteport instance.
164  *
165  * This is a template downcall.  NVME transport calls this function
166  * when it has completed the unregistration of a previously
167  * registered remoteport.
168  *
169  * Return value :
170  * None
171  */
172 void
173 lpfc_nvme_remoteport_delete(struct nvme_fc_remote_port *remoteport)
174 {
175 	struct lpfc_nvme_rport *rport = remoteport->private;
176 	struct lpfc_vport *vport;
177 	struct lpfc_nodelist *ndlp;
178 
179 	ndlp = rport->ndlp;
180 	if (!ndlp)
181 		goto rport_err;
182 
183 	vport = ndlp->vport;
184 	if (!vport)
185 		goto rport_err;
186 
187 	/* Remove this rport from the lport's list - memory is owned by the
188 	 * transport. Remove the ndlp reference for the NVME transport before
189 	 * calling state machine to remove the node, this is devloss = 0
190 	 * semantics.
191 	 */
192 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
193 			"6146 remoteport delete complete %p\n",
194 			remoteport);
195 	list_del(&rport->list);
196 	lpfc_nlp_put(ndlp);
197 
198  rport_err:
199 	/* This call has to execute as long as the rport is valid.
200 	 * Release any threads waiting for the unreg to complete.
201 	 */
202 	complete(&rport->rport_unreg_done);
203 }
204 
205 static void
206 lpfc_nvme_cmpl_gen_req(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
207 		       struct lpfc_wcqe_complete *wcqe)
208 {
209 	struct lpfc_vport *vport = cmdwqe->vport;
210 	uint32_t status;
211 	struct nvmefc_ls_req *pnvme_lsreq;
212 	struct lpfc_dmabuf *buf_ptr;
213 	struct lpfc_nodelist *ndlp;
214 
215 	vport->phba->fc4NvmeLsCmpls++;
216 
217 	pnvme_lsreq = (struct nvmefc_ls_req *)cmdwqe->context2;
218 	status = bf_get(lpfc_wcqe_c_status, wcqe) & LPFC_IOCB_STATUS_MASK;
219 	ndlp = (struct lpfc_nodelist *)cmdwqe->context1;
220 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
221 			 "6047 nvme cmpl Enter "
222 			 "Data %p DID %x Xri: %x status %x cmd:%p lsreg:%p "
223 			 "bmp:%p ndlp:%p\n",
224 			 pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
225 			 cmdwqe->sli4_xritag, status,
226 			 cmdwqe, pnvme_lsreq, cmdwqe->context3, ndlp);
227 
228 	lpfc_nvmeio_data(phba, "NVME LS  CMPL: xri x%x stat x%x parm x%x\n",
229 			 cmdwqe->sli4_xritag, status, wcqe->parameter);
230 
231 	if (cmdwqe->context3) {
232 		buf_ptr = (struct lpfc_dmabuf *)cmdwqe->context3;
233 		lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
234 		kfree(buf_ptr);
235 		cmdwqe->context3 = NULL;
236 	}
237 	if (pnvme_lsreq->done)
238 		pnvme_lsreq->done(pnvme_lsreq, status);
239 	else
240 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
241 				 "6046 nvme cmpl without done call back? "
242 				 "Data %p DID %x Xri: %x status %x\n",
243 				pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
244 				cmdwqe->sli4_xritag, status);
245 	if (ndlp) {
246 		lpfc_nlp_put(ndlp);
247 		cmdwqe->context1 = NULL;
248 	}
249 	lpfc_sli_release_iocbq(phba, cmdwqe);
250 }
251 
252 static int
253 lpfc_nvme_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
254 		  struct lpfc_dmabuf *inp,
255 		 struct nvmefc_ls_req *pnvme_lsreq,
256 	     void (*cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
257 			   struct lpfc_wcqe_complete *),
258 	     struct lpfc_nodelist *ndlp, uint32_t num_entry,
259 	     uint32_t tmo, uint8_t retry)
260 {
261 	struct lpfc_hba  *phba = vport->phba;
262 	union lpfc_wqe *wqe;
263 	struct lpfc_iocbq *genwqe;
264 	struct ulp_bde64 *bpl;
265 	struct ulp_bde64 bde;
266 	int i, rc, xmit_len, first_len;
267 
268 	/* Allocate buffer for  command WQE */
269 	genwqe = lpfc_sli_get_iocbq(phba);
270 	if (genwqe == NULL)
271 		return 1;
272 
273 	wqe = &genwqe->wqe;
274 	memset(wqe, 0, sizeof(union lpfc_wqe));
275 
276 	genwqe->context3 = (uint8_t *)bmp;
277 	genwqe->iocb_flag |= LPFC_IO_NVME_LS;
278 
279 	/* Save for completion so we can release these resources */
280 	genwqe->context1 = lpfc_nlp_get(ndlp);
281 	genwqe->context2 = (uint8_t *)pnvme_lsreq;
282 	/* Fill in payload, bp points to frame payload */
283 
284 	if (!tmo)
285 		/* FC spec states we need 3 * ratov for CT requests */
286 		tmo = (3 * phba->fc_ratov);
287 
288 	/* For this command calculate the xmit length of the request bde. */
289 	xmit_len = 0;
290 	first_len = 0;
291 	bpl = (struct ulp_bde64 *)bmp->virt;
292 	for (i = 0; i < num_entry; i++) {
293 		bde.tus.w = bpl[i].tus.w;
294 		if (bde.tus.f.bdeFlags != BUFF_TYPE_BDE_64)
295 			break;
296 		xmit_len += bde.tus.f.bdeSize;
297 		if (i == 0)
298 			first_len = xmit_len;
299 	}
300 
301 	genwqe->rsvd2 = num_entry;
302 	genwqe->hba_wqidx = 0;
303 
304 	/* Words 0 - 2 */
305 	wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
306 	wqe->generic.bde.tus.f.bdeSize = first_len;
307 	wqe->generic.bde.addrLow = bpl[0].addrLow;
308 	wqe->generic.bde.addrHigh = bpl[0].addrHigh;
309 
310 	/* Word 3 */
311 	wqe->gen_req.request_payload_len = first_len;
312 
313 	/* Word 4 */
314 
315 	/* Word 5 */
316 	bf_set(wqe_dfctl, &wqe->gen_req.wge_ctl, 0);
317 	bf_set(wqe_si, &wqe->gen_req.wge_ctl, 1);
318 	bf_set(wqe_la, &wqe->gen_req.wge_ctl, 1);
319 	bf_set(wqe_rctl, &wqe->gen_req.wge_ctl, FC_RCTL_ELS4_REQ);
320 	bf_set(wqe_type, &wqe->gen_req.wge_ctl, FC_TYPE_NVME);
321 
322 	/* Word 6 */
323 	bf_set(wqe_ctxt_tag, &wqe->gen_req.wqe_com,
324 	       phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
325 	bf_set(wqe_xri_tag, &wqe->gen_req.wqe_com, genwqe->sli4_xritag);
326 
327 	/* Word 7 */
328 	bf_set(wqe_tmo, &wqe->gen_req.wqe_com, (vport->phba->fc_ratov-1));
329 	bf_set(wqe_class, &wqe->gen_req.wqe_com, CLASS3);
330 	bf_set(wqe_cmnd, &wqe->gen_req.wqe_com, CMD_GEN_REQUEST64_WQE);
331 	bf_set(wqe_ct, &wqe->gen_req.wqe_com, SLI4_CT_RPI);
332 
333 	/* Word 8 */
334 	wqe->gen_req.wqe_com.abort_tag = genwqe->iotag;
335 
336 	/* Word 9 */
337 	bf_set(wqe_reqtag, &wqe->gen_req.wqe_com, genwqe->iotag);
338 
339 	/* Word 10 */
340 	bf_set(wqe_dbde, &wqe->gen_req.wqe_com, 1);
341 	bf_set(wqe_iod, &wqe->gen_req.wqe_com, LPFC_WQE_IOD_READ);
342 	bf_set(wqe_qosd, &wqe->gen_req.wqe_com, 1);
343 	bf_set(wqe_lenloc, &wqe->gen_req.wqe_com, LPFC_WQE_LENLOC_NONE);
344 	bf_set(wqe_ebde_cnt, &wqe->gen_req.wqe_com, 0);
345 
346 	/* Word 11 */
347 	bf_set(wqe_cqid, &wqe->gen_req.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
348 	bf_set(wqe_cmd_type, &wqe->gen_req.wqe_com, OTHER_COMMAND);
349 
350 
351 	/* Issue GEN REQ WQE for NPORT <did> */
352 	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
353 			 "6050 Issue GEN REQ WQE to NPORT x%x "
354 			 "Data: x%x x%x wq:%p lsreq:%p bmp:%p xmit:%d 1st:%d\n",
355 			 ndlp->nlp_DID, genwqe->iotag,
356 			 vport->port_state,
357 			genwqe, pnvme_lsreq, bmp, xmit_len, first_len);
358 	genwqe->wqe_cmpl = cmpl;
359 	genwqe->iocb_cmpl = NULL;
360 	genwqe->drvrTimeout = tmo + LPFC_DRVR_TIMEOUT;
361 	genwqe->vport = vport;
362 	genwqe->retry = retry;
363 
364 	lpfc_nvmeio_data(phba, "NVME LS  XMIT: xri x%x iotag x%x to x%06x\n",
365 			 genwqe->sli4_xritag, genwqe->iotag, ndlp->nlp_DID);
366 
367 	rc = lpfc_sli4_issue_wqe(phba, LPFC_ELS_RING, genwqe);
368 	if (rc == WQE_ERROR) {
369 		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
370 				 "6045 Issue GEN REQ WQE to NPORT x%x "
371 				 "Data: x%x x%x\n",
372 				 ndlp->nlp_DID, genwqe->iotag,
373 				 vport->port_state);
374 		lpfc_sli_release_iocbq(phba, genwqe);
375 		return 1;
376 	}
377 	return 0;
378 }
379 
380 /**
381  * lpfc_nvme_ls_req - Issue an Link Service request
382  * @lpfc_pnvme: Pointer to the driver's nvme instance data
383  * @lpfc_nvme_lport: Pointer to the driver's local port data
384  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
385  *
386  * Driver registers this routine to handle any link service request
387  * from the nvme_fc transport to a remote nvme-aware port.
388  *
389  * Return value :
390  *   0 - Success
391  *   TODO: What are the failure codes.
392  **/
393 static int
394 lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport,
395 		 struct nvme_fc_remote_port *pnvme_rport,
396 		 struct nvmefc_ls_req *pnvme_lsreq)
397 {
398 	int ret = 0;
399 	struct lpfc_nvme_lport *lport;
400 	struct lpfc_vport *vport;
401 	struct lpfc_nodelist *ndlp;
402 	struct ulp_bde64 *bpl;
403 	struct lpfc_dmabuf *bmp;
404 	uint16_t ntype, nstate;
405 
406 	/* there are two dma buf in the request, actually there is one and
407 	 * the second one is just the start address + cmd size.
408 	 * Before calling lpfc_nvme_gen_req these buffers need to be wrapped
409 	 * in a lpfc_dmabuf struct. When freeing we just free the wrapper
410 	 * because the nvem layer owns the data bufs.
411 	 * We do not have to break these packets open, we don't care what is in
412 	 * them. And we do not have to look at the resonse data, we only care
413 	 * that we got a response. All of the caring is going to happen in the
414 	 * nvme-fc layer.
415 	 */
416 
417 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
418 	vport = lport->vport;
419 
420 	ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
421 	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
422 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
423 				 "6051 DID x%06x not an active rport.\n",
424 				 pnvme_rport->port_id);
425 		return -ENODEV;
426 	}
427 
428 	/* The remote node has to be a mapped nvme target or an
429 	 * unmapped nvme initiator or it's an error.
430 	 */
431 	ntype = ndlp->nlp_type;
432 	nstate = ndlp->nlp_state;
433 	if ((ntype & NLP_NVME_TARGET && nstate != NLP_STE_MAPPED_NODE) ||
434 	    (ntype & NLP_NVME_INITIATOR && nstate != NLP_STE_UNMAPPED_NODE)) {
435 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
436 				 "6088 DID x%06x not ready for "
437 				 "IO. State x%x, Type x%x\n",
438 				 pnvme_rport->port_id,
439 				 ndlp->nlp_state, ndlp->nlp_type);
440 		return -ENODEV;
441 	}
442 	bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
443 	if (!bmp) {
444 
445 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
446 				 "6044 Could not find node for DID %x\n",
447 				 pnvme_rport->port_id);
448 		return 2;
449 	}
450 	INIT_LIST_HEAD(&bmp->list);
451 	bmp->virt = lpfc_mbuf_alloc(vport->phba, MEM_PRI, &(bmp->phys));
452 	if (!bmp->virt) {
453 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
454 				 "6042 Could not find node for DID %x\n",
455 				 pnvme_rport->port_id);
456 		kfree(bmp);
457 		return 3;
458 	}
459 	bpl = (struct ulp_bde64 *)bmp->virt;
460 	bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rqstdma));
461 	bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rqstdma));
462 	bpl->tus.f.bdeFlags = 0;
463 	bpl->tus.f.bdeSize = pnvme_lsreq->rqstlen;
464 	bpl->tus.w = le32_to_cpu(bpl->tus.w);
465 	bpl++;
466 
467 	bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rspdma));
468 	bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rspdma));
469 	bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
470 	bpl->tus.f.bdeSize = pnvme_lsreq->rsplen;
471 	bpl->tus.w = le32_to_cpu(bpl->tus.w);
472 
473 	/* Expand print to include key fields. */
474 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
475 			 "6149 ENTER.  lport %p, rport %p lsreq%p rqstlen:%d "
476 			 "rsplen:%d %pad %pad\n",
477 			 pnvme_lport, pnvme_rport,
478 			 pnvme_lsreq, pnvme_lsreq->rqstlen,
479 			 pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma,
480 			 &pnvme_lsreq->rspdma);
481 
482 	vport->phba->fc4NvmeLsRequests++;
483 
484 	/* Hardcode the wait to 30 seconds.  Connections are failing otherwise.
485 	 * This code allows it all to work.
486 	 */
487 	ret = lpfc_nvme_gen_req(vport, bmp, pnvme_lsreq->rqstaddr,
488 				pnvme_lsreq, lpfc_nvme_cmpl_gen_req,
489 				ndlp, 2, 30, 0);
490 	if (ret != WQE_SUCCESS) {
491 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
492 				 "6052 EXIT. issue ls wqe failed lport %p, "
493 				 "rport %p lsreq%p Status %x DID %x\n",
494 				 pnvme_lport, pnvme_rport, pnvme_lsreq,
495 				 ret, ndlp->nlp_DID);
496 		lpfc_mbuf_free(vport->phba, bmp->virt, bmp->phys);
497 		kfree(bmp);
498 		return ret;
499 	}
500 
501 	/* Stub in routine and return 0 for now. */
502 	return ret;
503 }
504 
505 /**
506  * lpfc_nvme_ls_abort - Issue an Link Service request
507  * @lpfc_pnvme: Pointer to the driver's nvme instance data
508  * @lpfc_nvme_lport: Pointer to the driver's local port data
509  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
510  *
511  * Driver registers this routine to handle any link service request
512  * from the nvme_fc transport to a remote nvme-aware port.
513  *
514  * Return value :
515  *   0 - Success
516  *   TODO: What are the failure codes.
517  **/
518 static void
519 lpfc_nvme_ls_abort(struct nvme_fc_local_port *pnvme_lport,
520 		   struct nvme_fc_remote_port *pnvme_rport,
521 		   struct nvmefc_ls_req *pnvme_lsreq)
522 {
523 	struct lpfc_nvme_lport *lport;
524 	struct lpfc_vport *vport;
525 	struct lpfc_hba *phba;
526 	struct lpfc_nodelist *ndlp;
527 	LIST_HEAD(abort_list);
528 	struct lpfc_sli_ring *pring;
529 	struct lpfc_iocbq *wqe, *next_wqe;
530 
531 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
532 	vport = lport->vport;
533 	phba = vport->phba;
534 
535 	ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
536 	if (!ndlp) {
537 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
538 				 "6049 Could not find node for DID %x\n",
539 				 pnvme_rport->port_id);
540 		return;
541 	}
542 
543 	/* Expand print to include key fields. */
544 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
545 			 "6040 ENTER.  lport %p, rport %p lsreq %p rqstlen:%d "
546 			 "rsplen:%d %pad %pad\n",
547 			 pnvme_lport, pnvme_rport,
548 			 pnvme_lsreq, pnvme_lsreq->rqstlen,
549 			 pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma,
550 			 &pnvme_lsreq->rspdma);
551 
552 	/*
553 	 * Lock the ELS ring txcmplq and build a local list of all ELS IOs
554 	 * that need an ABTS.  The IOs need to stay on the txcmplq so that
555 	 * the abort operation completes them successfully.
556 	 */
557 	pring = phba->sli4_hba.nvmels_wq->pring;
558 	spin_lock_irq(&phba->hbalock);
559 	spin_lock(&pring->ring_lock);
560 	list_for_each_entry_safe(wqe, next_wqe, &pring->txcmplq, list) {
561 		/* Add to abort_list on on NDLP match. */
562 		if (lpfc_check_sli_ndlp(phba, pring, wqe, ndlp)) {
563 			wqe->iocb_flag |= LPFC_DRIVER_ABORTED;
564 			list_add_tail(&wqe->dlist, &abort_list);
565 		}
566 	}
567 	spin_unlock(&pring->ring_lock);
568 	spin_unlock_irq(&phba->hbalock);
569 
570 	/* Abort the targeted IOs and remove them from the abort list. */
571 	list_for_each_entry_safe(wqe, next_wqe, &abort_list, dlist) {
572 		spin_lock_irq(&phba->hbalock);
573 		list_del_init(&wqe->dlist);
574 		lpfc_sli_issue_abort_iotag(phba, pring, wqe);
575 		spin_unlock_irq(&phba->hbalock);
576 	}
577 }
578 
579 /* Fix up the existing sgls for NVME IO. */
580 static void
581 lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
582 		       struct lpfc_nvme_buf *lpfc_ncmd,
583 		       struct nvmefc_fcp_req *nCmd)
584 {
585 	struct sli4_sge *sgl;
586 	union lpfc_wqe128 *wqe;
587 	uint32_t *wptr, *dptr;
588 
589 	/*
590 	 * Adjust the FCP_CMD and FCP_RSP DMA data and sge_len to
591 	 * match NVME.  NVME sends 96 bytes. Also, use the
592 	 * nvme commands command and response dma addresses
593 	 * rather than the virtual memory to ease the restore
594 	 * operation.
595 	 */
596 	sgl = lpfc_ncmd->nvme_sgl;
597 	sgl->sge_len = cpu_to_le32(nCmd->cmdlen);
598 
599 	sgl++;
600 
601 	/* Setup the physical region for the FCP RSP */
602 	sgl->addr_hi = cpu_to_le32(putPaddrHigh(nCmd->rspdma));
603 	sgl->addr_lo = cpu_to_le32(putPaddrLow(nCmd->rspdma));
604 	sgl->word2 = le32_to_cpu(sgl->word2);
605 	if (nCmd->sg_cnt)
606 		bf_set(lpfc_sli4_sge_last, sgl, 0);
607 	else
608 		bf_set(lpfc_sli4_sge_last, sgl, 1);
609 	sgl->word2 = cpu_to_le32(sgl->word2);
610 	sgl->sge_len = cpu_to_le32(nCmd->rsplen);
611 
612 	/*
613 	 * Get a local pointer to the built-in wqe and correct
614 	 * the cmd size to match NVME's 96 bytes and fix
615 	 * the dma address.
616 	 */
617 
618 	/* 128 byte wqe support here */
619 	wqe = (union lpfc_wqe128 *)&lpfc_ncmd->cur_iocbq.wqe;
620 
621 	/* Word 0-2 - NVME CMND IU (embedded payload) */
622 	wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_IMMED;
623 	wqe->generic.bde.tus.f.bdeSize = 60;
624 	wqe->generic.bde.addrHigh = 0;
625 	wqe->generic.bde.addrLow =  64;  /* Word 16 */
626 
627 	/* Word 3 */
628 	bf_set(payload_offset_len, &wqe->fcp_icmd,
629 	       (nCmd->rsplen + nCmd->cmdlen));
630 
631 	/* Word 10 */
632 	bf_set(wqe_nvme, &wqe->fcp_icmd.wqe_com, 1);
633 	bf_set(wqe_wqes, &wqe->fcp_icmd.wqe_com, 1);
634 
635 	/*
636 	 * Embed the payload in the last half of the WQE
637 	 * WQE words 16-30 get the NVME CMD IU payload
638 	 *
639 	 * WQE words 16-19 get payload Words 1-4
640 	 * WQE words 20-21 get payload Words 6-7
641 	 * WQE words 22-29 get payload Words 16-23
642 	 */
643 	wptr = &wqe->words[16];  /* WQE ptr */
644 	dptr = (uint32_t *)nCmd->cmdaddr;  /* payload ptr */
645 	dptr++;			/* Skip Word 0 in payload */
646 
647 	*wptr++ = *dptr++;	/* Word 1 */
648 	*wptr++ = *dptr++;	/* Word 2 */
649 	*wptr++ = *dptr++;	/* Word 3 */
650 	*wptr++ = *dptr++;	/* Word 4 */
651 	dptr++;			/* Skip Word 5 in payload */
652 	*wptr++ = *dptr++;	/* Word 6 */
653 	*wptr++ = *dptr++;	/* Word 7 */
654 	dptr += 8;		/* Skip Words 8-15 in payload */
655 	*wptr++ = *dptr++;	/* Word 16 */
656 	*wptr++ = *dptr++;	/* Word 17 */
657 	*wptr++ = *dptr++;	/* Word 18 */
658 	*wptr++ = *dptr++;	/* Word 19 */
659 	*wptr++ = *dptr++;	/* Word 20 */
660 	*wptr++ = *dptr++;	/* Word 21 */
661 	*wptr++ = *dptr++;	/* Word 22 */
662 	*wptr   = *dptr;	/* Word 23 */
663 }
664 
665 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
666 static void
667 lpfc_nvme_ktime(struct lpfc_hba *phba,
668 		struct lpfc_nvme_buf *lpfc_ncmd)
669 {
670 	uint64_t seg1, seg2, seg3, seg4;
671 
672 	if (!phba->ktime_on)
673 		return;
674 	if (!lpfc_ncmd->ts_last_cmd ||
675 	    !lpfc_ncmd->ts_cmd_start ||
676 	    !lpfc_ncmd->ts_cmd_wqput ||
677 	    !lpfc_ncmd->ts_isr_cmpl ||
678 	    !lpfc_ncmd->ts_data_nvme)
679 		return;
680 	if (lpfc_ncmd->ts_cmd_start < lpfc_ncmd->ts_last_cmd)
681 		return;
682 	if (lpfc_ncmd->ts_cmd_wqput < lpfc_ncmd->ts_cmd_start)
683 		return;
684 	if (lpfc_ncmd->ts_isr_cmpl < lpfc_ncmd->ts_cmd_wqput)
685 		return;
686 	if (lpfc_ncmd->ts_data_nvme < lpfc_ncmd->ts_isr_cmpl)
687 		return;
688 	/*
689 	 * Segment 1 - Time from Last FCP command cmpl is handed
690 	 * off to NVME Layer to start of next command.
691 	 * Segment 2 - Time from Driver receives a IO cmd start
692 	 * from NVME Layer to WQ put is done on IO cmd.
693 	 * Segment 3 - Time from Driver WQ put is done on IO cmd
694 	 * to MSI-X ISR for IO cmpl.
695 	 * Segment 4 - Time from MSI-X ISR for IO cmpl to when
696 	 * cmpl is handled off to the NVME Layer.
697 	 */
698 	seg1 = lpfc_ncmd->ts_cmd_start - lpfc_ncmd->ts_last_cmd;
699 	if (seg1 > 5000000)  /* 5 ms - for sequential IOs */
700 		return;
701 
702 	/* Calculate times relative to start of IO */
703 	seg2 = (lpfc_ncmd->ts_cmd_wqput - lpfc_ncmd->ts_cmd_start);
704 	seg3 = (lpfc_ncmd->ts_isr_cmpl -
705 		lpfc_ncmd->ts_cmd_start) - seg2;
706 	seg4 = (lpfc_ncmd->ts_data_nvme -
707 		lpfc_ncmd->ts_cmd_start) - seg2 - seg3;
708 	phba->ktime_data_samples++;
709 	phba->ktime_seg1_total += seg1;
710 	if (seg1 < phba->ktime_seg1_min)
711 		phba->ktime_seg1_min = seg1;
712 	else if (seg1 > phba->ktime_seg1_max)
713 		phba->ktime_seg1_max = seg1;
714 	phba->ktime_seg2_total += seg2;
715 	if (seg2 < phba->ktime_seg2_min)
716 		phba->ktime_seg2_min = seg2;
717 	else if (seg2 > phba->ktime_seg2_max)
718 		phba->ktime_seg2_max = seg2;
719 	phba->ktime_seg3_total += seg3;
720 	if (seg3 < phba->ktime_seg3_min)
721 		phba->ktime_seg3_min = seg3;
722 	else if (seg3 > phba->ktime_seg3_max)
723 		phba->ktime_seg3_max = seg3;
724 	phba->ktime_seg4_total += seg4;
725 	if (seg4 < phba->ktime_seg4_min)
726 		phba->ktime_seg4_min = seg4;
727 	else if (seg4 > phba->ktime_seg4_max)
728 		phba->ktime_seg4_max = seg4;
729 
730 	lpfc_ncmd->ts_last_cmd = 0;
731 	lpfc_ncmd->ts_cmd_start = 0;
732 	lpfc_ncmd->ts_cmd_wqput  = 0;
733 	lpfc_ncmd->ts_isr_cmpl = 0;
734 	lpfc_ncmd->ts_data_nvme = 0;
735 }
736 #endif
737 
738 /**
739  * lpfc_nvme_io_cmd_wqe_cmpl - Complete an NVME-over-FCP IO
740  * @lpfc_pnvme: Pointer to the driver's nvme instance data
741  * @lpfc_nvme_lport: Pointer to the driver's local port data
742  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
743  *
744  * Driver registers this routine as it io request handler.  This
745  * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
746  * data structure to the rport indicated in @lpfc_nvme_rport.
747  *
748  * Return value :
749  *   0 - Success
750  *   TODO: What are the failure codes.
751  **/
752 static void
753 lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
754 			  struct lpfc_wcqe_complete *wcqe)
755 {
756 	struct lpfc_nvme_buf *lpfc_ncmd =
757 		(struct lpfc_nvme_buf *)pwqeIn->context1;
758 	struct lpfc_vport *vport = pwqeIn->vport;
759 	struct nvmefc_fcp_req *nCmd;
760 	struct nvme_fc_ersp_iu *ep;
761 	struct nvme_fc_cmd_iu *cp;
762 	struct lpfc_nvme_rport *rport;
763 	struct lpfc_nodelist *ndlp;
764 	struct lpfc_nvme_fcpreq_priv *freqpriv;
765 	unsigned long flags;
766 	uint32_t code;
767 	uint16_t cid, sqhd, data;
768 	uint32_t *ptr;
769 
770 	/* Sanity check on return of outstanding command */
771 	if (!lpfc_ncmd || !lpfc_ncmd->nvmeCmd || !lpfc_ncmd->nrport) {
772 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
773 				 "6071 Completion pointers bad on wqe %p.\n",
774 				 wcqe);
775 		return;
776 	}
777 	phba->fc4NvmeIoCmpls++;
778 
779 	nCmd = lpfc_ncmd->nvmeCmd;
780 	rport = lpfc_ncmd->nrport;
781 
782 	lpfc_nvmeio_data(phba, "NVME FCP CMPL: xri x%x stat x%x parm x%x\n",
783 			 lpfc_ncmd->cur_iocbq.sli4_xritag,
784 			 bf_get(lpfc_wcqe_c_status, wcqe), wcqe->parameter);
785 	/*
786 	 * Catch race where our node has transitioned, but the
787 	 * transport is still transitioning.
788 	 */
789 	ndlp = rport->ndlp;
790 	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
791 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
792 				 "6061 rport %p,  DID x%06x node not ready.\n",
793 				 rport, rport->remoteport->port_id);
794 
795 		ndlp = lpfc_findnode_did(vport, rport->remoteport->port_id);
796 		if (!ndlp) {
797 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
798 					 "6062 Ignoring NVME cmpl.  No ndlp\n");
799 			goto out_err;
800 		}
801 	}
802 
803 	code = bf_get(lpfc_wcqe_c_code, wcqe);
804 	if (code == CQE_CODE_NVME_ERSP) {
805 		/* For this type of CQE, we need to rebuild the rsp */
806 		ep = (struct nvme_fc_ersp_iu *)nCmd->rspaddr;
807 
808 		/*
809 		 * Get Command Id from cmd to plug into response. This
810 		 * code is not needed in the next NVME Transport drop.
811 		 */
812 		cp = (struct nvme_fc_cmd_iu *)nCmd->cmdaddr;
813 		cid = cp->sqe.common.command_id;
814 
815 		/*
816 		 * RSN is in CQE word 2
817 		 * SQHD is in CQE Word 3 bits 15:0
818 		 * Cmd Specific info is in CQE Word 1
819 		 * and in CQE Word 0 bits 15:0
820 		 */
821 		sqhd = bf_get(lpfc_wcqe_c_sqhead, wcqe);
822 
823 		/* Now lets build the NVME ERSP IU */
824 		ep->iu_len = cpu_to_be16(8);
825 		ep->rsn = wcqe->parameter;
826 		ep->xfrd_len = cpu_to_be32(nCmd->payload_length);
827 		ep->rsvd12 = 0;
828 		ptr = (uint32_t *)&ep->cqe.result.u64;
829 		*ptr++ = wcqe->total_data_placed;
830 		data = bf_get(lpfc_wcqe_c_ersp0, wcqe);
831 		*ptr = (uint32_t)data;
832 		ep->cqe.sq_head = sqhd;
833 		ep->cqe.sq_id =  nCmd->sqid;
834 		ep->cqe.command_id = cid;
835 		ep->cqe.status = 0;
836 
837 		lpfc_ncmd->status = IOSTAT_SUCCESS;
838 		lpfc_ncmd->result = 0;
839 		nCmd->rcv_rsplen = LPFC_NVME_ERSP_LEN;
840 		nCmd->transferred_length = nCmd->payload_length;
841 	} else {
842 		lpfc_ncmd->status = (bf_get(lpfc_wcqe_c_status, wcqe) &
843 			    LPFC_IOCB_STATUS_MASK);
844 		lpfc_ncmd->result = wcqe->parameter;
845 
846 		/* For NVME, the only failure path that results in an
847 		 * IO error is when the adapter rejects it.  All other
848 		 * conditions are a success case and resolved by the
849 		 * transport.
850 		 * IOSTAT_FCP_RSP_ERROR means:
851 		 * 1. Length of data received doesn't match total
852 		 *    transfer length in WQE
853 		 * 2. If the RSP payload does NOT match these cases:
854 		 *    a. RSP length 12/24 bytes and all zeros
855 		 *    b. NVME ERSP
856 		 */
857 		switch (lpfc_ncmd->status) {
858 		case IOSTAT_SUCCESS:
859 			nCmd->transferred_length = wcqe->total_data_placed;
860 			nCmd->rcv_rsplen = 0;
861 			nCmd->status = 0;
862 			break;
863 		case IOSTAT_FCP_RSP_ERROR:
864 			nCmd->transferred_length = wcqe->total_data_placed;
865 			nCmd->rcv_rsplen = wcqe->parameter;
866 			nCmd->status = 0;
867 			/* Sanity check */
868 			if (nCmd->rcv_rsplen == LPFC_NVME_ERSP_LEN)
869 				break;
870 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
871 					 "6081 NVME Completion Protocol Error: "
872 					 "xri %x status x%x result x%x "
873 					 "placed x%x\n",
874 					 lpfc_ncmd->cur_iocbq.sli4_xritag,
875 					 lpfc_ncmd->status, lpfc_ncmd->result,
876 					 wcqe->total_data_placed);
877 			break;
878 		default:
879 out_err:
880 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
881 					 "6072 NVME Completion Error: xri %x "
882 					 "status x%x result x%x placed x%x\n",
883 					 lpfc_ncmd->cur_iocbq.sli4_xritag,
884 					 lpfc_ncmd->status, lpfc_ncmd->result,
885 					 wcqe->total_data_placed);
886 			nCmd->transferred_length = 0;
887 			nCmd->rcv_rsplen = 0;
888 			nCmd->status = NVME_SC_FC_TRANSPORT_ERROR;
889 		}
890 	}
891 
892 	/* pick up SLI4 exhange busy condition */
893 	if (bf_get(lpfc_wcqe_c_xb, wcqe))
894 		lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
895 	else
896 		lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
897 
898 	if (ndlp && NLP_CHK_NODE_ACT(ndlp))
899 		atomic_dec(&ndlp->cmd_pending);
900 
901 	/* Update stats and complete the IO.  There is
902 	 * no need for dma unprep because the nvme_transport
903 	 * owns the dma address.
904 	 */
905 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
906 	if (phba->ktime_on) {
907 		lpfc_ncmd->ts_isr_cmpl = pwqeIn->isr_timestamp;
908 		lpfc_ncmd->ts_data_nvme = ktime_get_ns();
909 		phba->ktime_last_cmd = lpfc_ncmd->ts_data_nvme;
910 		lpfc_nvme_ktime(phba, lpfc_ncmd);
911 	}
912 	if (phba->cpucheck_on & LPFC_CHECK_NVME_IO) {
913 		if (lpfc_ncmd->cpu != smp_processor_id())
914 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
915 					 "6701 CPU Check cmpl: "
916 					 "cpu %d expect %d\n",
917 					 smp_processor_id(), lpfc_ncmd->cpu);
918 		if (lpfc_ncmd->cpu < LPFC_CHECK_CPU_CNT)
919 			phba->cpucheck_cmpl_io[lpfc_ncmd->cpu]++;
920 	}
921 #endif
922 	freqpriv = nCmd->private;
923 	freqpriv->nvme_buf = NULL;
924 	nCmd->done(nCmd);
925 
926 	spin_lock_irqsave(&phba->hbalock, flags);
927 	lpfc_ncmd->nrport = NULL;
928 	spin_unlock_irqrestore(&phba->hbalock, flags);
929 
930 	lpfc_release_nvme_buf(phba, lpfc_ncmd);
931 }
932 
933 
934 /**
935  * lpfc_nvme_prep_io_cmd - Issue an NVME-over-FCP IO
936  * @lpfc_pnvme: Pointer to the driver's nvme instance data
937  * @lpfc_nvme_lport: Pointer to the driver's local port data
938  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
939  * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
940  * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
941  *
942  * Driver registers this routine as it io request handler.  This
943  * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
944  * data structure to the rport indicated in @lpfc_nvme_rport.
945  *
946  * Return value :
947  *   0 - Success
948  *   TODO: What are the failure codes.
949  **/
950 static int
951 lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
952 		      struct lpfc_nvme_buf *lpfc_ncmd,
953 		      struct lpfc_nodelist *pnode)
954 {
955 	struct lpfc_hba *phba = vport->phba;
956 	struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
957 	struct lpfc_iocbq *pwqeq = &(lpfc_ncmd->cur_iocbq);
958 	union lpfc_wqe128 *wqe = (union lpfc_wqe128 *)&pwqeq->wqe;
959 	uint32_t req_len;
960 
961 	if (!pnode || !NLP_CHK_NODE_ACT(pnode))
962 		return -EINVAL;
963 
964 	/*
965 	 * There are three possibilities here - use scatter-gather segment, use
966 	 * the single mapping, or neither.
967 	 */
968 	wqe->fcp_iwrite.initial_xfer_len = 0;
969 	if (nCmd->sg_cnt) {
970 		if (nCmd->io_dir == NVMEFC_FCP_WRITE) {
971 			/* Word 5 */
972 			if ((phba->cfg_nvme_enable_fb) &&
973 			    (pnode->nlp_flag & NLP_FIRSTBURST)) {
974 				req_len = lpfc_ncmd->nvmeCmd->payload_length;
975 				if (req_len < pnode->nvme_fb_size)
976 					wqe->fcp_iwrite.initial_xfer_len =
977 						req_len;
978 				else
979 					wqe->fcp_iwrite.initial_xfer_len =
980 						pnode->nvme_fb_size;
981 			}
982 
983 			/* Word 7 */
984 			bf_set(wqe_cmnd, &wqe->generic.wqe_com,
985 			       CMD_FCP_IWRITE64_WQE);
986 			bf_set(wqe_pu, &wqe->generic.wqe_com,
987 			       PARM_READ_CHECK);
988 
989 			/* Word 10 */
990 			bf_set(wqe_qosd, &wqe->fcp_iwrite.wqe_com, 0);
991 			bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com,
992 			       LPFC_WQE_IOD_WRITE);
993 			bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com,
994 			       LPFC_WQE_LENLOC_WORD4);
995 			if (phba->cfg_nvme_oas)
996 				bf_set(wqe_oas, &wqe->fcp_iwrite.wqe_com, 1);
997 
998 			/* Word 11 */
999 			bf_set(wqe_cmd_type, &wqe->generic.wqe_com,
1000 			       NVME_WRITE_CMD);
1001 
1002 			phba->fc4NvmeOutputRequests++;
1003 		} else {
1004 			/* Word 7 */
1005 			bf_set(wqe_cmnd, &wqe->generic.wqe_com,
1006 			       CMD_FCP_IREAD64_WQE);
1007 			bf_set(wqe_pu, &wqe->generic.wqe_com,
1008 			       PARM_READ_CHECK);
1009 
1010 			/* Word 10 */
1011 			bf_set(wqe_qosd, &wqe->fcp_iread.wqe_com, 0);
1012 			bf_set(wqe_iod, &wqe->fcp_iread.wqe_com,
1013 			       LPFC_WQE_IOD_READ);
1014 			bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com,
1015 			       LPFC_WQE_LENLOC_WORD4);
1016 			if (phba->cfg_nvme_oas)
1017 				bf_set(wqe_oas, &wqe->fcp_iread.wqe_com, 1);
1018 
1019 			/* Word 11 */
1020 			bf_set(wqe_cmd_type, &wqe->generic.wqe_com,
1021 			       NVME_READ_CMD);
1022 
1023 			phba->fc4NvmeInputRequests++;
1024 		}
1025 	} else {
1026 		/* Word 4 */
1027 		wqe->fcp_icmd.rsrvd4 = 0;
1028 
1029 		/* Word 7 */
1030 		bf_set(wqe_cmnd, &wqe->generic.wqe_com, CMD_FCP_ICMND64_WQE);
1031 		bf_set(wqe_pu, &wqe->generic.wqe_com, 0);
1032 
1033 		/* Word 10 */
1034 		bf_set(wqe_qosd, &wqe->fcp_icmd.wqe_com, 1);
1035 		bf_set(wqe_iod, &wqe->fcp_icmd.wqe_com, LPFC_WQE_IOD_WRITE);
1036 		bf_set(wqe_lenloc, &wqe->fcp_icmd.wqe_com,
1037 		       LPFC_WQE_LENLOC_NONE);
1038 		if (phba->cfg_nvme_oas)
1039 			bf_set(wqe_oas, &wqe->fcp_icmd.wqe_com, 1);
1040 
1041 		/* Word 11 */
1042 		bf_set(wqe_cmd_type, &wqe->generic.wqe_com, NVME_READ_CMD);
1043 
1044 		phba->fc4NvmeControlRequests++;
1045 	}
1046 	/*
1047 	 * Finish initializing those WQE fields that are independent
1048 	 * of the nvme_cmnd request_buffer
1049 	 */
1050 
1051 	/* Word 6 */
1052 	bf_set(wqe_ctxt_tag, &wqe->generic.wqe_com,
1053 	       phba->sli4_hba.rpi_ids[pnode->nlp_rpi]);
1054 	bf_set(wqe_xri_tag, &wqe->generic.wqe_com, pwqeq->sli4_xritag);
1055 
1056 	/* Word 7 */
1057 	/* Preserve Class data in the ndlp. */
1058 	bf_set(wqe_class, &wqe->generic.wqe_com,
1059 	       (pnode->nlp_fcp_info & 0x0f));
1060 
1061 	/* Word 8 */
1062 	wqe->generic.wqe_com.abort_tag = pwqeq->iotag;
1063 
1064 	/* Word 9 */
1065 	bf_set(wqe_reqtag, &wqe->generic.wqe_com, pwqeq->iotag);
1066 
1067 	/* Word 11 */
1068 	bf_set(wqe_cqid, &wqe->generic.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
1069 
1070 	pwqeq->vport = vport;
1071 	return 0;
1072 }
1073 
1074 
1075 /**
1076  * lpfc_nvme_prep_io_dma - Issue an NVME-over-FCP IO
1077  * @lpfc_pnvme: Pointer to the driver's nvme instance data
1078  * @lpfc_nvme_lport: Pointer to the driver's local port data
1079  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
1080  * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
1081  * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
1082  *
1083  * Driver registers this routine as it io request handler.  This
1084  * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
1085  * data structure to the rport indicated in @lpfc_nvme_rport.
1086  *
1087  * Return value :
1088  *   0 - Success
1089  *   TODO: What are the failure codes.
1090  **/
1091 static int
1092 lpfc_nvme_prep_io_dma(struct lpfc_vport *vport,
1093 		      struct lpfc_nvme_buf *lpfc_ncmd)
1094 {
1095 	struct lpfc_hba *phba = vport->phba;
1096 	struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
1097 	union lpfc_wqe128 *wqe = (union lpfc_wqe128 *)&lpfc_ncmd->cur_iocbq.wqe;
1098 	struct sli4_sge *sgl = lpfc_ncmd->nvme_sgl;
1099 	struct scatterlist *data_sg;
1100 	struct sli4_sge *first_data_sgl;
1101 	dma_addr_t physaddr;
1102 	uint32_t num_bde = 0;
1103 	uint32_t dma_len;
1104 	uint32_t dma_offset = 0;
1105 	int nseg, i;
1106 
1107 	/* Fix up the command and response DMA stuff. */
1108 	lpfc_nvme_adj_fcp_sgls(vport, lpfc_ncmd, nCmd);
1109 
1110 	/*
1111 	 * There are three possibilities here - use scatter-gather segment, use
1112 	 * the single mapping, or neither.
1113 	 */
1114 	if (nCmd->sg_cnt) {
1115 		/*
1116 		 * Jump over the cmd and rsp SGEs.  The fix routine
1117 		 * has already adjusted for this.
1118 		 */
1119 		sgl += 2;
1120 
1121 		first_data_sgl = sgl;
1122 		lpfc_ncmd->seg_cnt = nCmd->sg_cnt;
1123 		if (lpfc_ncmd->seg_cnt > phba->cfg_nvme_seg_cnt) {
1124 			lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
1125 					"6058 Too many sg segments from "
1126 					"NVME Transport.  Max %d, "
1127 					"nvmeIO sg_cnt %d\n",
1128 					phba->cfg_nvme_seg_cnt,
1129 					lpfc_ncmd->seg_cnt);
1130 			lpfc_ncmd->seg_cnt = 0;
1131 			return 1;
1132 		}
1133 
1134 		/*
1135 		 * The driver established a maximum scatter-gather segment count
1136 		 * during probe that limits the number of sg elements in any
1137 		 * single nvme command.  Just run through the seg_cnt and format
1138 		 * the sge's.
1139 		 */
1140 		nseg = nCmd->sg_cnt;
1141 		data_sg = nCmd->first_sgl;
1142 		for (i = 0; i < nseg; i++) {
1143 			if (data_sg == NULL) {
1144 				lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
1145 						"6059 dptr err %d, nseg %d\n",
1146 						i, nseg);
1147 				lpfc_ncmd->seg_cnt = 0;
1148 				return 1;
1149 			}
1150 			physaddr = data_sg->dma_address;
1151 			dma_len = data_sg->length;
1152 			sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
1153 			sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
1154 			sgl->word2 = le32_to_cpu(sgl->word2);
1155 			if ((num_bde + 1) == nseg)
1156 				bf_set(lpfc_sli4_sge_last, sgl, 1);
1157 			else
1158 				bf_set(lpfc_sli4_sge_last, sgl, 0);
1159 			bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
1160 			bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
1161 			sgl->word2 = cpu_to_le32(sgl->word2);
1162 			sgl->sge_len = cpu_to_le32(dma_len);
1163 
1164 			dma_offset += dma_len;
1165 			data_sg = sg_next(data_sg);
1166 			sgl++;
1167 		}
1168 	} else {
1169 		/* For this clause to be valid, the payload_length
1170 		 * and sg_cnt must zero.
1171 		 */
1172 		if (nCmd->payload_length != 0) {
1173 			lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
1174 					"6063 NVME DMA Prep Err: sg_cnt %d "
1175 					"payload_length x%x\n",
1176 					nCmd->sg_cnt, nCmd->payload_length);
1177 			return 1;
1178 		}
1179 	}
1180 
1181 	/*
1182 	 * Due to difference in data length between DIF/non-DIF paths,
1183 	 * we need to set word 4 of WQE here
1184 	 */
1185 	wqe->fcp_iread.total_xfer_len = nCmd->payload_length;
1186 	return 0;
1187 }
1188 
1189 /**
1190  * lpfc_nvme_fcp_io_submit - Issue an NVME-over-FCP IO
1191  * @lpfc_pnvme: Pointer to the driver's nvme instance data
1192  * @lpfc_nvme_lport: Pointer to the driver's local port data
1193  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
1194  * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
1195  * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
1196  *
1197  * Driver registers this routine as it io request handler.  This
1198  * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
1199  * data structure to the rport
1200  indicated in @lpfc_nvme_rport.
1201  *
1202  * Return value :
1203  *   0 - Success
1204  *   TODO: What are the failure codes.
1205  **/
1206 static int
1207 lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport,
1208 			struct nvme_fc_remote_port *pnvme_rport,
1209 			void *hw_queue_handle,
1210 			struct nvmefc_fcp_req *pnvme_fcreq)
1211 {
1212 	int ret = 0;
1213 	struct lpfc_nvme_lport *lport;
1214 	struct lpfc_vport *vport;
1215 	struct lpfc_hba *phba;
1216 	struct lpfc_nodelist *ndlp;
1217 	struct lpfc_nvme_buf *lpfc_ncmd;
1218 	struct lpfc_nvme_rport *rport;
1219 	struct lpfc_nvme_qhandle *lpfc_queue_info;
1220 	struct lpfc_nvme_fcpreq_priv *freqpriv = pnvme_fcreq->private;
1221 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1222 	uint64_t start = 0;
1223 #endif
1224 
1225 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
1226 	vport = lport->vport;
1227 	phba = vport->phba;
1228 
1229 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1230 	if (phba->ktime_on)
1231 		start = ktime_get_ns();
1232 #endif
1233 	rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
1234 	lpfc_queue_info = (struct lpfc_nvme_qhandle *)hw_queue_handle;
1235 
1236 	/*
1237 	 * Catch race where our node has transitioned, but the
1238 	 * transport is still transitioning.
1239 	 */
1240 	ndlp = rport->ndlp;
1241 	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
1242 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
1243 				 "6053 rport %p, ndlp %p, DID x%06x "
1244 				 "ndlp not ready.\n",
1245 				 rport, ndlp, pnvme_rport->port_id);
1246 
1247 		ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
1248 		if (!ndlp) {
1249 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
1250 					 "6066 Missing node for DID %x\n",
1251 					 pnvme_rport->port_id);
1252 			ret = -ENODEV;
1253 			goto out_fail;
1254 		}
1255 	}
1256 
1257 	/* The remote node has to be a mapped target or it's an error. */
1258 	if ((ndlp->nlp_type & NLP_NVME_TARGET) &&
1259 	    (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
1260 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
1261 				 "6036 rport %p, DID x%06x not ready for "
1262 				 "IO. State x%x, Type x%x\n",
1263 				 rport, pnvme_rport->port_id,
1264 				 ndlp->nlp_state, ndlp->nlp_type);
1265 		ret = -ENODEV;
1266 		goto out_fail;
1267 
1268 	}
1269 
1270 	/* The node is shared with FCP IO, make sure the IO pending count does
1271 	 * not exceed the programmed depth.
1272 	 */
1273 	if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) {
1274 		ret = -EAGAIN;
1275 		goto out_fail;
1276 	}
1277 
1278 	lpfc_ncmd = lpfc_get_nvme_buf(phba, ndlp);
1279 	if (lpfc_ncmd == NULL) {
1280 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
1281 				 "6065 driver's buffer pool is empty, "
1282 				 "IO failed\n");
1283 		ret = -ENOMEM;
1284 		goto out_fail;
1285 	}
1286 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1287 	if (phba->ktime_on) {
1288 		lpfc_ncmd->ts_cmd_start = start;
1289 		lpfc_ncmd->ts_last_cmd = phba->ktime_last_cmd;
1290 	}
1291 #endif
1292 
1293 	/*
1294 	 * Store the data needed by the driver to issue, abort, and complete
1295 	 * an IO.
1296 	 * Do not let the IO hang out forever.  There is no midlayer issuing
1297 	 * an abort so inform the FW of the maximum IO pending time.
1298 	 */
1299 	freqpriv->nvme_buf = lpfc_ncmd;
1300 	lpfc_ncmd->nvmeCmd = pnvme_fcreq;
1301 	lpfc_ncmd->nrport = rport;
1302 	lpfc_ncmd->ndlp = ndlp;
1303 	lpfc_ncmd->start_time = jiffies;
1304 
1305 	lpfc_nvme_prep_io_cmd(vport, lpfc_ncmd, ndlp);
1306 	ret = lpfc_nvme_prep_io_dma(vport, lpfc_ncmd);
1307 	if (ret) {
1308 		ret = -ENOMEM;
1309 		goto out_free_nvme_buf;
1310 	}
1311 
1312 	atomic_inc(&ndlp->cmd_pending);
1313 
1314 	/*
1315 	 * Issue the IO on the WQ indicated by index in the hw_queue_handle.
1316 	 * This identfier was create in our hardware queue create callback
1317 	 * routine. The driver now is dependent on the IO queue steering from
1318 	 * the transport.  We are trusting the upper NVME layers know which
1319 	 * index to use and that they have affinitized a CPU to this hardware
1320 	 * queue. A hardware queue maps to a driver MSI-X vector/EQ/CQ/WQ.
1321 	 */
1322 	lpfc_ncmd->cur_iocbq.hba_wqidx = lpfc_queue_info->index;
1323 
1324 	lpfc_nvmeio_data(phba, "NVME FCP XMIT: xri x%x idx %d to %06x\n",
1325 			 lpfc_ncmd->cur_iocbq.sli4_xritag,
1326 			 lpfc_queue_info->index, ndlp->nlp_DID);
1327 
1328 	ret = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, &lpfc_ncmd->cur_iocbq);
1329 	if (ret) {
1330 		atomic_dec(&ndlp->cmd_pending);
1331 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
1332 				 "6113 FCP could not issue WQE err %x "
1333 				 "sid: x%x did: x%x oxid: x%x\n",
1334 				 ret, vport->fc_myDID, ndlp->nlp_DID,
1335 				 lpfc_ncmd->cur_iocbq.sli4_xritag);
1336 		ret = -EBUSY;
1337 		goto out_free_nvme_buf;
1338 	}
1339 
1340 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1341 	if (phba->ktime_on)
1342 		lpfc_ncmd->ts_cmd_wqput = ktime_get_ns();
1343 
1344 	if (phba->cpucheck_on & LPFC_CHECK_NVME_IO) {
1345 		lpfc_ncmd->cpu = smp_processor_id();
1346 		if (lpfc_ncmd->cpu != lpfc_queue_info->index) {
1347 			/* Check for admin queue */
1348 			if (lpfc_queue_info->qidx) {
1349 				lpfc_printf_vlog(vport,
1350 						 KERN_ERR, LOG_NVME_IOERR,
1351 						"6702 CPU Check cmd: "
1352 						"cpu %d wq %d\n",
1353 						lpfc_ncmd->cpu,
1354 						lpfc_queue_info->index);
1355 			}
1356 			lpfc_ncmd->cpu = lpfc_queue_info->index;
1357 		}
1358 		if (lpfc_ncmd->cpu < LPFC_CHECK_CPU_CNT)
1359 			phba->cpucheck_xmt_io[lpfc_ncmd->cpu]++;
1360 	}
1361 #endif
1362 	return 0;
1363 
1364  out_free_nvme_buf:
1365 	lpfc_release_nvme_buf(phba, lpfc_ncmd);
1366  out_fail:
1367 	return ret;
1368 }
1369 
1370 /**
1371  * lpfc_nvme_abort_fcreq_cmpl - Complete an NVME FCP abort request.
1372  * @phba: Pointer to HBA context object
1373  * @cmdiocb: Pointer to command iocb object.
1374  * @rspiocb: Pointer to response iocb object.
1375  *
1376  * This is the callback function for any NVME FCP IO that was aborted.
1377  *
1378  * Return value:
1379  *   None
1380  **/
1381 void
1382 lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
1383 			   struct lpfc_wcqe_complete *abts_cmpl)
1384 {
1385 	lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
1386 			"6145 ABORT_XRI_CN completing on rpi x%x "
1387 			"original iotag x%x, abort cmd iotag x%x "
1388 			"req_tag x%x, status x%x, hwstatus x%x\n",
1389 			cmdiocb->iocb.un.acxri.abortContextTag,
1390 			cmdiocb->iocb.un.acxri.abortIoTag,
1391 			cmdiocb->iotag,
1392 			bf_get(lpfc_wcqe_c_request_tag, abts_cmpl),
1393 			bf_get(lpfc_wcqe_c_status, abts_cmpl),
1394 			bf_get(lpfc_wcqe_c_hw_status, abts_cmpl));
1395 	lpfc_sli_release_iocbq(phba, cmdiocb);
1396 }
1397 
1398 /**
1399  * lpfc_nvme_fcp_abort - Issue an NVME-over-FCP ABTS
1400  * @lpfc_pnvme: Pointer to the driver's nvme instance data
1401  * @lpfc_nvme_lport: Pointer to the driver's local port data
1402  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
1403  * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
1404  * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
1405  *
1406  * Driver registers this routine as its nvme request io abort handler.  This
1407  * routine issues an fcp Abort WQE with data from the @lpfc_nvme_fcpreq
1408  * data structure to the rport indicated in @lpfc_nvme_rport.  This routine
1409  * is executed asynchronously - one the target is validated as "MAPPED" and
1410  * ready for IO, the driver issues the abort request and returns.
1411  *
1412  * Return value:
1413  *   None
1414  **/
1415 static void
1416 lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport,
1417 		    struct nvme_fc_remote_port *pnvme_rport,
1418 		    void *hw_queue_handle,
1419 		    struct nvmefc_fcp_req *pnvme_fcreq)
1420 {
1421 	struct lpfc_nvme_lport *lport;
1422 	struct lpfc_vport *vport;
1423 	struct lpfc_hba *phba;
1424 	struct lpfc_nodelist *ndlp;
1425 	struct lpfc_nvme_rport *rport;
1426 	struct lpfc_nvme_buf *lpfc_nbuf;
1427 	struct lpfc_iocbq *abts_buf;
1428 	struct lpfc_iocbq *nvmereq_wqe;
1429 	struct lpfc_nvme_fcpreq_priv *freqpriv = pnvme_fcreq->private;
1430 	union lpfc_wqe *abts_wqe;
1431 	unsigned long flags;
1432 	int ret_val;
1433 
1434 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
1435 	rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
1436 	vport = lport->vport;
1437 	phba = vport->phba;
1438 
1439 	/* Announce entry to new IO submit field. */
1440 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
1441 			 "6002 Abort Request to rport DID x%06x "
1442 			 "for nvme_fc_req %p\n",
1443 			 pnvme_rport->port_id,
1444 			 pnvme_fcreq);
1445 
1446 	/*
1447 	 * Catch race where our node has transitioned, but the
1448 	 * transport is still transitioning.
1449 	 */
1450 	ndlp = rport->ndlp;
1451 	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
1452 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_ABTS,
1453 				 "6054 rport %p, ndlp %p, DID x%06x ndlp "
1454 				 " not ready.\n",
1455 				 rport, ndlp, pnvme_rport->port_id);
1456 
1457 		ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
1458 		if (!ndlp) {
1459 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1460 					 "6055 Could not find node for "
1461 					 "DID %x\n",
1462 					 pnvme_rport->port_id);
1463 			return;
1464 		}
1465 	}
1466 
1467 	/* The remote node has to be ready to send an abort. */
1468 	if ((ndlp->nlp_state != NLP_STE_MAPPED_NODE) &&
1469 	    !(ndlp->nlp_type & NLP_NVME_TARGET)) {
1470 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1471 				 "6048 rport %p, DID x%06x not ready for "
1472 				 "IO. State x%x, Type x%x\n",
1473 				 rport, pnvme_rport->port_id,
1474 				 ndlp->nlp_state, ndlp->nlp_type);
1475 		return;
1476 	}
1477 
1478 	/* If the hba is getting reset, this flag is set.  It is
1479 	 * cleared when the reset is complete and rings reestablished.
1480 	 */
1481 	spin_lock_irqsave(&phba->hbalock, flags);
1482 	/* driver queued commands are in process of being flushed */
1483 	if (phba->hba_flag & HBA_NVME_IOQ_FLUSH) {
1484 		spin_unlock_irqrestore(&phba->hbalock, flags);
1485 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1486 				 "6139 Driver in reset cleanup - flushing "
1487 				 "NVME Req now.  hba_flag x%x\n",
1488 				 phba->hba_flag);
1489 		return;
1490 	}
1491 
1492 	lpfc_nbuf = freqpriv->nvme_buf;
1493 	if (!lpfc_nbuf) {
1494 		spin_unlock_irqrestore(&phba->hbalock, flags);
1495 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1496 				 "6140 NVME IO req has no matching lpfc nvme "
1497 				 "io buffer.  Skipping abort req.\n");
1498 		return;
1499 	} else if (!lpfc_nbuf->nvmeCmd) {
1500 		spin_unlock_irqrestore(&phba->hbalock, flags);
1501 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1502 				 "6141 lpfc NVME IO req has no nvme_fcreq "
1503 				 "io buffer.  Skipping abort req.\n");
1504 		return;
1505 	}
1506 	nvmereq_wqe = &lpfc_nbuf->cur_iocbq;
1507 
1508 	/*
1509 	 * The lpfc_nbuf and the mapped nvme_fcreq in the driver's
1510 	 * state must match the nvme_fcreq passed by the nvme
1511 	 * transport.  If they don't match, it is likely the driver
1512 	 * has already completed the NVME IO and the nvme transport
1513 	 * has not seen it yet.
1514 	 */
1515 	if (lpfc_nbuf->nvmeCmd != pnvme_fcreq) {
1516 		spin_unlock_irqrestore(&phba->hbalock, flags);
1517 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1518 				 "6143 NVME req mismatch: "
1519 				 "lpfc_nbuf %p nvmeCmd %p, "
1520 				 "pnvme_fcreq %p.  Skipping Abort xri x%x\n",
1521 				 lpfc_nbuf, lpfc_nbuf->nvmeCmd,
1522 				 pnvme_fcreq, nvmereq_wqe->sli4_xritag);
1523 		return;
1524 	}
1525 
1526 	/* Don't abort IOs no longer on the pending queue. */
1527 	if (!(nvmereq_wqe->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
1528 		spin_unlock_irqrestore(&phba->hbalock, flags);
1529 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1530 				 "6142 NVME IO req %p not queued - skipping "
1531 				 "abort req xri x%x\n",
1532 				 pnvme_fcreq, nvmereq_wqe->sli4_xritag);
1533 		return;
1534 	}
1535 
1536 	lpfc_nvmeio_data(phba, "NVME FCP ABORT: xri x%x idx %d to %06x\n",
1537 			 nvmereq_wqe->sli4_xritag,
1538 			 nvmereq_wqe->hba_wqidx, ndlp->nlp_DID);
1539 
1540 	/* Outstanding abort is in progress */
1541 	if (nvmereq_wqe->iocb_flag & LPFC_DRIVER_ABORTED) {
1542 		spin_unlock_irqrestore(&phba->hbalock, flags);
1543 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1544 				 "6144 Outstanding NVME I/O Abort Request "
1545 				 "still pending on nvme_fcreq %p, "
1546 				 "lpfc_ncmd %p xri x%x\n",
1547 				 pnvme_fcreq, lpfc_nbuf,
1548 				 nvmereq_wqe->sli4_xritag);
1549 		return;
1550 	}
1551 
1552 	abts_buf = __lpfc_sli_get_iocbq(phba);
1553 	if (!abts_buf) {
1554 		spin_unlock_irqrestore(&phba->hbalock, flags);
1555 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1556 				 "6136 No available abort wqes. Skipping "
1557 				 "Abts req for nvme_fcreq %p xri x%x\n",
1558 				 pnvme_fcreq, nvmereq_wqe->sli4_xritag);
1559 		return;
1560 	}
1561 
1562 	/* Ready - mark outstanding as aborted by driver. */
1563 	nvmereq_wqe->iocb_flag |= LPFC_DRIVER_ABORTED;
1564 
1565 	/* Complete prepping the abort wqe and issue to the FW. */
1566 	abts_wqe = &abts_buf->wqe;
1567 
1568 	/* WQEs are reused.  Clear stale data and set key fields to
1569 	 * zero like ia, iaab, iaar, xri_tag, and ctxt_tag.
1570 	 */
1571 	memset(abts_wqe, 0, sizeof(union lpfc_wqe));
1572 	bf_set(abort_cmd_criteria, &abts_wqe->abort_cmd, T_XRI_TAG);
1573 
1574 	/* word 7 */
1575 	bf_set(wqe_ct, &abts_wqe->abort_cmd.wqe_com, 0);
1576 	bf_set(wqe_cmnd, &abts_wqe->abort_cmd.wqe_com, CMD_ABORT_XRI_CX);
1577 	bf_set(wqe_class, &abts_wqe->abort_cmd.wqe_com,
1578 	       nvmereq_wqe->iocb.ulpClass);
1579 
1580 	/* word 8 - tell the FW to abort the IO associated with this
1581 	 * outstanding exchange ID.
1582 	 */
1583 	abts_wqe->abort_cmd.wqe_com.abort_tag = nvmereq_wqe->sli4_xritag;
1584 
1585 	/* word 9 - this is the iotag for the abts_wqe completion. */
1586 	bf_set(wqe_reqtag, &abts_wqe->abort_cmd.wqe_com,
1587 	       abts_buf->iotag);
1588 
1589 	/* word 10 */
1590 	bf_set(wqe_wqid, &abts_wqe->abort_cmd.wqe_com, nvmereq_wqe->hba_wqidx);
1591 	bf_set(wqe_qosd, &abts_wqe->abort_cmd.wqe_com, 1);
1592 	bf_set(wqe_lenloc, &abts_wqe->abort_cmd.wqe_com, LPFC_WQE_LENLOC_NONE);
1593 
1594 	/* word 11 */
1595 	bf_set(wqe_cmd_type, &abts_wqe->abort_cmd.wqe_com, OTHER_COMMAND);
1596 	bf_set(wqe_wqec, &abts_wqe->abort_cmd.wqe_com, 1);
1597 	bf_set(wqe_cqid, &abts_wqe->abort_cmd.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
1598 
1599 	/* ABTS WQE must go to the same WQ as the WQE to be aborted */
1600 	abts_buf->iocb_flag |= LPFC_IO_NVME;
1601 	abts_buf->hba_wqidx = nvmereq_wqe->hba_wqidx;
1602 	abts_buf->vport = vport;
1603 	abts_buf->wqe_cmpl = lpfc_nvme_abort_fcreq_cmpl;
1604 	ret_val = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abts_buf);
1605 	spin_unlock_irqrestore(&phba->hbalock, flags);
1606 	if (ret_val == IOCB_ERROR) {
1607 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1608 				 "6137 Failed abts issue_wqe with status x%x "
1609 				 "for nvme_fcreq %p.\n",
1610 				 ret_val, pnvme_fcreq);
1611 		lpfc_sli_release_iocbq(phba, abts_buf);
1612 		return;
1613 	}
1614 
1615 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
1616 			 "6138 Transport Abort NVME Request Issued for "
1617 			 "ox_id x%x on reqtag x%x\n",
1618 			 nvmereq_wqe->sli4_xritag,
1619 			 abts_buf->iotag);
1620 }
1621 
1622 /* Declare and initialization an instance of the FC NVME template. */
1623 static struct nvme_fc_port_template lpfc_nvme_template = {
1624 	/* initiator-based functions */
1625 	.localport_delete  = lpfc_nvme_localport_delete,
1626 	.remoteport_delete = lpfc_nvme_remoteport_delete,
1627 	.create_queue = lpfc_nvme_create_queue,
1628 	.delete_queue = lpfc_nvme_delete_queue,
1629 	.ls_req       = lpfc_nvme_ls_req,
1630 	.fcp_io       = lpfc_nvme_fcp_io_submit,
1631 	.ls_abort     = lpfc_nvme_ls_abort,
1632 	.fcp_abort    = lpfc_nvme_fcp_abort,
1633 
1634 	.max_hw_queues = 1,
1635 	.max_sgl_segments = LPFC_NVME_DEFAULT_SEGS,
1636 	.max_dif_sgl_segments = LPFC_NVME_DEFAULT_SEGS,
1637 	.dma_boundary = 0xFFFFFFFF,
1638 
1639 	/* Sizes of additional private data for data structures.
1640 	 * No use for the last two sizes at this time.
1641 	 */
1642 	.local_priv_sz = sizeof(struct lpfc_nvme_lport),
1643 	.remote_priv_sz = sizeof(struct lpfc_nvme_rport),
1644 	.lsrqst_priv_sz = 0,
1645 	.fcprqst_priv_sz = sizeof(struct lpfc_nvme_fcpreq_priv),
1646 };
1647 
1648 /**
1649  * lpfc_sli4_post_nvme_sgl_block - post a block of nvme sgl list to firmware
1650  * @phba: pointer to lpfc hba data structure.
1651  * @nblist: pointer to nvme buffer list.
1652  * @count: number of scsi buffers on the list.
1653  *
1654  * This routine is invoked to post a block of @count scsi sgl pages from a
1655  * SCSI buffer list @nblist to the HBA using non-embedded mailbox command.
1656  * No Lock is held.
1657  *
1658  **/
1659 static int
1660 lpfc_sli4_post_nvme_sgl_block(struct lpfc_hba *phba,
1661 			      struct list_head *nblist,
1662 			      int count)
1663 {
1664 	struct lpfc_nvme_buf *lpfc_ncmd;
1665 	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
1666 	struct sgl_page_pairs *sgl_pg_pairs;
1667 	void *viraddr;
1668 	LPFC_MBOXQ_t *mbox;
1669 	uint32_t reqlen, alloclen, pg_pairs;
1670 	uint32_t mbox_tmo;
1671 	uint16_t xritag_start = 0;
1672 	int rc = 0;
1673 	uint32_t shdr_status, shdr_add_status;
1674 	dma_addr_t pdma_phys_bpl1;
1675 	union lpfc_sli4_cfg_shdr *shdr;
1676 
1677 	/* Calculate the requested length of the dma memory */
1678 	reqlen = count * sizeof(struct sgl_page_pairs) +
1679 		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
1680 	if (reqlen > SLI4_PAGE_SIZE) {
1681 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
1682 				"6118 Block sgl registration required DMA "
1683 				"size (%d) great than a page\n", reqlen);
1684 		return -ENOMEM;
1685 	}
1686 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
1687 	if (!mbox) {
1688 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1689 				"6119 Failed to allocate mbox cmd memory\n");
1690 		return -ENOMEM;
1691 	}
1692 
1693 	/* Allocate DMA memory and set up the non-embedded mailbox command */
1694 	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
1695 				LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
1696 				LPFC_SLI4_MBX_NEMBED);
1697 
1698 	if (alloclen < reqlen) {
1699 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1700 				"6120 Allocated DMA memory size (%d) is "
1701 				"less than the requested DMA memory "
1702 				"size (%d)\n", alloclen, reqlen);
1703 		lpfc_sli4_mbox_cmd_free(phba, mbox);
1704 		return -ENOMEM;
1705 	}
1706 
1707 	/* Get the first SGE entry from the non-embedded DMA memory */
1708 	viraddr = mbox->sge_array->addr[0];
1709 
1710 	/* Set up the SGL pages in the non-embedded DMA pages */
1711 	sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
1712 	sgl_pg_pairs = &sgl->sgl_pg_pairs;
1713 
1714 	pg_pairs = 0;
1715 	list_for_each_entry(lpfc_ncmd, nblist, list) {
1716 		/* Set up the sge entry */
1717 		sgl_pg_pairs->sgl_pg0_addr_lo =
1718 			cpu_to_le32(putPaddrLow(lpfc_ncmd->dma_phys_sgl));
1719 		sgl_pg_pairs->sgl_pg0_addr_hi =
1720 			cpu_to_le32(putPaddrHigh(lpfc_ncmd->dma_phys_sgl));
1721 		if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
1722 			pdma_phys_bpl1 = lpfc_ncmd->dma_phys_sgl +
1723 						SGL_PAGE_SIZE;
1724 		else
1725 			pdma_phys_bpl1 = 0;
1726 		sgl_pg_pairs->sgl_pg1_addr_lo =
1727 			cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
1728 		sgl_pg_pairs->sgl_pg1_addr_hi =
1729 			cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
1730 		/* Keep the first xritag on the list */
1731 		if (pg_pairs == 0)
1732 			xritag_start = lpfc_ncmd->cur_iocbq.sli4_xritag;
1733 		sgl_pg_pairs++;
1734 		pg_pairs++;
1735 	}
1736 	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
1737 	bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
1738 	/* Perform endian conversion if necessary */
1739 	sgl->word0 = cpu_to_le32(sgl->word0);
1740 
1741 	if (!phba->sli4_hba.intr_enable)
1742 		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
1743 	else {
1744 		mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
1745 		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
1746 	}
1747 	shdr = (union lpfc_sli4_cfg_shdr *)&sgl->cfg_shdr;
1748 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
1749 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
1750 	if (rc != MBX_TIMEOUT)
1751 		lpfc_sli4_mbox_cmd_free(phba, mbox);
1752 	if (shdr_status || shdr_add_status || rc) {
1753 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
1754 				"6125 POST_SGL_BLOCK mailbox command failed "
1755 				"status x%x add_status x%x mbx status x%x\n",
1756 				shdr_status, shdr_add_status, rc);
1757 		rc = -ENXIO;
1758 	}
1759 	return rc;
1760 }
1761 
1762 /**
1763  * lpfc_post_nvme_sgl_list - Post blocks of nvme buffer sgls from a list
1764  * @phba: pointer to lpfc hba data structure.
1765  * @post_nblist: pointer to the nvme buffer list.
1766  *
1767  * This routine walks a list of nvme buffers that was passed in. It attempts
1768  * to construct blocks of nvme buffer sgls which contains contiguous xris and
1769  * uses the non-embedded SGL block post mailbox commands to post to the port.
1770  * For single NVME buffer sgl with non-contiguous xri, if any, it shall use
1771  * embedded SGL post mailbox command for posting. The @post_nblist passed in
1772  * must be local list, thus no lock is needed when manipulate the list.
1773  *
1774  * Returns: 0 = failure, non-zero number of successfully posted buffers.
1775  **/
1776 static int
1777 lpfc_post_nvme_sgl_list(struct lpfc_hba *phba,
1778 			     struct list_head *post_nblist, int sb_count)
1779 {
1780 	struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
1781 	int status, sgl_size;
1782 	int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
1783 	dma_addr_t pdma_phys_sgl1;
1784 	int last_xritag = NO_XRI;
1785 	int cur_xritag;
1786 	LIST_HEAD(prep_nblist);
1787 	LIST_HEAD(blck_nblist);
1788 	LIST_HEAD(nvme_nblist);
1789 
1790 	/* sanity check */
1791 	if (sb_count <= 0)
1792 		return -EINVAL;
1793 
1794 	sgl_size = phba->cfg_sg_dma_buf_size;
1795 
1796 	list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, post_nblist, list) {
1797 		list_del_init(&lpfc_ncmd->list);
1798 		block_cnt++;
1799 		if ((last_xritag != NO_XRI) &&
1800 		    (lpfc_ncmd->cur_iocbq.sli4_xritag != last_xritag + 1)) {
1801 			/* a hole in xri block, form a sgl posting block */
1802 			list_splice_init(&prep_nblist, &blck_nblist);
1803 			post_cnt = block_cnt - 1;
1804 			/* prepare list for next posting block */
1805 			list_add_tail(&lpfc_ncmd->list, &prep_nblist);
1806 			block_cnt = 1;
1807 		} else {
1808 			/* prepare list for next posting block */
1809 			list_add_tail(&lpfc_ncmd->list, &prep_nblist);
1810 			/* enough sgls for non-embed sgl mbox command */
1811 			if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
1812 				list_splice_init(&prep_nblist, &blck_nblist);
1813 				post_cnt = block_cnt;
1814 				block_cnt = 0;
1815 			}
1816 		}
1817 		num_posting++;
1818 		last_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
1819 
1820 		/* end of repost sgl list condition for NVME buffers */
1821 		if (num_posting == sb_count) {
1822 			if (post_cnt == 0) {
1823 				/* last sgl posting block */
1824 				list_splice_init(&prep_nblist, &blck_nblist);
1825 				post_cnt = block_cnt;
1826 			} else if (block_cnt == 1) {
1827 				/* last single sgl with non-contiguous xri */
1828 				if (sgl_size > SGL_PAGE_SIZE)
1829 					pdma_phys_sgl1 =
1830 						lpfc_ncmd->dma_phys_sgl +
1831 						SGL_PAGE_SIZE;
1832 				else
1833 					pdma_phys_sgl1 = 0;
1834 				cur_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
1835 				status = lpfc_sli4_post_sgl(phba,
1836 						lpfc_ncmd->dma_phys_sgl,
1837 						pdma_phys_sgl1, cur_xritag);
1838 				if (status) {
1839 					/* failure, put on abort nvme list */
1840 					lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
1841 				} else {
1842 					/* success, put on NVME buffer list */
1843 					lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
1844 					lpfc_ncmd->status = IOSTAT_SUCCESS;
1845 					num_posted++;
1846 				}
1847 				/* success, put on NVME buffer sgl list */
1848 				list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
1849 			}
1850 		}
1851 
1852 		/* continue until a nembed page worth of sgls */
1853 		if (post_cnt == 0)
1854 			continue;
1855 
1856 		/* post block of NVME buffer list sgls */
1857 		status = lpfc_sli4_post_nvme_sgl_block(phba, &blck_nblist,
1858 						       post_cnt);
1859 
1860 		/* don't reset xirtag due to hole in xri block */
1861 		if (block_cnt == 0)
1862 			last_xritag = NO_XRI;
1863 
1864 		/* reset NVME buffer post count for next round of posting */
1865 		post_cnt = 0;
1866 
1867 		/* put posted NVME buffer-sgl posted on NVME buffer sgl list */
1868 		while (!list_empty(&blck_nblist)) {
1869 			list_remove_head(&blck_nblist, lpfc_ncmd,
1870 					 struct lpfc_nvme_buf, list);
1871 			if (status) {
1872 				/* failure, put on abort nvme list */
1873 				lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
1874 			} else {
1875 				/* success, put on NVME buffer list */
1876 				lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
1877 				lpfc_ncmd->status = IOSTAT_SUCCESS;
1878 				num_posted++;
1879 			}
1880 			list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
1881 		}
1882 	}
1883 	/* Push NVME buffers with sgl posted to the available list */
1884 	while (!list_empty(&nvme_nblist)) {
1885 		list_remove_head(&nvme_nblist, lpfc_ncmd,
1886 				 struct lpfc_nvme_buf, list);
1887 		lpfc_release_nvme_buf(phba, lpfc_ncmd);
1888 	}
1889 	return num_posted;
1890 }
1891 
1892 /**
1893  * lpfc_repost_nvme_sgl_list - Repost all the allocated nvme buffer sgls
1894  * @phba: pointer to lpfc hba data structure.
1895  *
1896  * This routine walks the list of nvme buffers that have been allocated and
1897  * repost them to the port by using SGL block post. This is needed after a
1898  * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
1899  * is responsible for moving all nvme buffers on the lpfc_abts_nvme_sgl_list
1900  * to the lpfc_nvme_buf_list. If the repost fails, reject all nvme buffers.
1901  *
1902  * Returns: 0 = success, non-zero failure.
1903  **/
1904 int
1905 lpfc_repost_nvme_sgl_list(struct lpfc_hba *phba)
1906 {
1907 	LIST_HEAD(post_nblist);
1908 	int num_posted, rc = 0;
1909 
1910 	/* get all NVME buffers need to repost to a local list */
1911 	spin_lock_irq(&phba->nvme_buf_list_get_lock);
1912 	spin_lock(&phba->nvme_buf_list_put_lock);
1913 	list_splice_init(&phba->lpfc_nvme_buf_list_get, &post_nblist);
1914 	list_splice(&phba->lpfc_nvme_buf_list_put, &post_nblist);
1915 	spin_unlock(&phba->nvme_buf_list_put_lock);
1916 	spin_unlock_irq(&phba->nvme_buf_list_get_lock);
1917 
1918 	/* post the list of nvme buffer sgls to port if available */
1919 	if (!list_empty(&post_nblist)) {
1920 		num_posted = lpfc_post_nvme_sgl_list(phba, &post_nblist,
1921 						phba->sli4_hba.nvme_xri_cnt);
1922 		/* failed to post any nvme buffer, return error */
1923 		if (num_posted == 0)
1924 			rc = -EIO;
1925 	}
1926 	return rc;
1927 }
1928 
1929 /**
1930  * lpfc_new_nvme_buf - Scsi buffer allocator for HBA with SLI4 IF spec
1931  * @vport: The virtual port for which this call being executed.
1932  * @num_to_allocate: The requested number of buffers to allocate.
1933  *
1934  * This routine allocates nvme buffers for device with SLI-4 interface spec,
1935  * the nvme buffer contains all the necessary information needed to initiate
1936  * a NVME I/O. After allocating up to @num_to_allocate NVME buffers and put
1937  * them on a list, it post them to the port by using SGL block post.
1938  *
1939  * Return codes:
1940  *   int - number of nvme buffers that were allocated and posted.
1941  *   0 = failure, less than num_to_alloc is a partial failure.
1942  **/
1943 static int
1944 lpfc_new_nvme_buf(struct lpfc_vport *vport, int num_to_alloc)
1945 {
1946 	struct lpfc_hba *phba = vport->phba;
1947 	struct lpfc_nvme_buf *lpfc_ncmd;
1948 	struct lpfc_iocbq *pwqeq;
1949 	union lpfc_wqe128 *wqe;
1950 	struct sli4_sge *sgl;
1951 	dma_addr_t pdma_phys_sgl;
1952 	uint16_t iotag, lxri = 0;
1953 	int bcnt, num_posted, sgl_size;
1954 	LIST_HEAD(prep_nblist);
1955 	LIST_HEAD(post_nblist);
1956 	LIST_HEAD(nvme_nblist);
1957 
1958 	sgl_size = phba->cfg_sg_dma_buf_size;
1959 
1960 	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
1961 		lpfc_ncmd = kzalloc(sizeof(struct lpfc_nvme_buf), GFP_KERNEL);
1962 		if (!lpfc_ncmd)
1963 			break;
1964 		/*
1965 		 * Get memory from the pci pool to map the virt space to
1966 		 * pci bus space for an I/O. The DMA buffer includes the
1967 		 * number of SGE's necessary to support the sg_tablesize.
1968 		 */
1969 		lpfc_ncmd->data = pci_pool_alloc(phba->lpfc_sg_dma_buf_pool,
1970 						 GFP_KERNEL,
1971 						 &lpfc_ncmd->dma_handle);
1972 		if (!lpfc_ncmd->data) {
1973 			kfree(lpfc_ncmd);
1974 			break;
1975 		}
1976 		memset(lpfc_ncmd->data, 0, phba->cfg_sg_dma_buf_size);
1977 
1978 		lxri = lpfc_sli4_next_xritag(phba);
1979 		if (lxri == NO_XRI) {
1980 			pci_pool_free(phba->lpfc_sg_dma_buf_pool,
1981 				      lpfc_ncmd->data, lpfc_ncmd->dma_handle);
1982 			kfree(lpfc_ncmd);
1983 			break;
1984 		}
1985 		pwqeq = &(lpfc_ncmd->cur_iocbq);
1986 		wqe = (union lpfc_wqe128 *)&pwqeq->wqe;
1987 
1988 		/* Allocate iotag for lpfc_ncmd->cur_iocbq. */
1989 		iotag = lpfc_sli_next_iotag(phba, pwqeq);
1990 		if (iotag == 0) {
1991 			pci_pool_free(phba->lpfc_sg_dma_buf_pool,
1992 				      lpfc_ncmd->data, lpfc_ncmd->dma_handle);
1993 			kfree(lpfc_ncmd);
1994 			lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
1995 					"6121 Failed to allocated IOTAG for"
1996 					" XRI:0x%x\n", lxri);
1997 			lpfc_sli4_free_xri(phba, lxri);
1998 			break;
1999 		}
2000 		pwqeq->sli4_lxritag = lxri;
2001 		pwqeq->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
2002 		pwqeq->iocb_flag |= LPFC_IO_NVME;
2003 		pwqeq->context1 = lpfc_ncmd;
2004 		pwqeq->wqe_cmpl = lpfc_nvme_io_cmd_wqe_cmpl;
2005 
2006 		/* Initialize local short-hand pointers. */
2007 		lpfc_ncmd->nvme_sgl = lpfc_ncmd->data;
2008 		sgl = lpfc_ncmd->nvme_sgl;
2009 		pdma_phys_sgl = lpfc_ncmd->dma_handle;
2010 		lpfc_ncmd->dma_phys_sgl = pdma_phys_sgl;
2011 
2012 		/* Rsp SGE will be filled in when we rcv an IO
2013 		 * from the NVME Layer to be sent.
2014 		 * The cmd is going to be embedded so we need a SKIP SGE.
2015 		 */
2016 		bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_SKIP);
2017 		bf_set(lpfc_sli4_sge_last, sgl, 0);
2018 		sgl->word2 = cpu_to_le32(sgl->word2);
2019 		/* Fill in word 3 / sgl_len during cmd submission */
2020 
2021 		lpfc_ncmd->cur_iocbq.context1 = lpfc_ncmd;
2022 
2023 		/* Word 7 */
2024 		bf_set(wqe_erp, &wqe->generic.wqe_com, 0);
2025 		/* NVME upper layers will time things out, if needed */
2026 		bf_set(wqe_tmo, &wqe->generic.wqe_com, 0);
2027 
2028 		/* Word 10 */
2029 		bf_set(wqe_ebde_cnt, &wqe->generic.wqe_com, 0);
2030 		bf_set(wqe_dbde, &wqe->generic.wqe_com, 1);
2031 
2032 		/* add the nvme buffer to a post list */
2033 		list_add_tail(&lpfc_ncmd->list, &post_nblist);
2034 		spin_lock_irq(&phba->nvme_buf_list_get_lock);
2035 		phba->sli4_hba.nvme_xri_cnt++;
2036 		spin_unlock_irq(&phba->nvme_buf_list_get_lock);
2037 	}
2038 	lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
2039 			"6114 Allocate %d out of %d requested new NVME "
2040 			"buffers\n", bcnt, num_to_alloc);
2041 
2042 	/* post the list of nvme buffer sgls to port if available */
2043 	if (!list_empty(&post_nblist))
2044 		num_posted = lpfc_post_nvme_sgl_list(phba,
2045 						     &post_nblist, bcnt);
2046 	else
2047 		num_posted = 0;
2048 
2049 	return num_posted;
2050 }
2051 
2052 /**
2053  * lpfc_get_nvme_buf - Get a nvme buffer from lpfc_nvme_buf_list of the HBA
2054  * @phba: The HBA for which this call is being executed.
2055  *
2056  * This routine removes a nvme buffer from head of @phba lpfc_nvme_buf_list list
2057  * and returns to caller.
2058  *
2059  * Return codes:
2060  *   NULL - Error
2061  *   Pointer to lpfc_nvme_buf - Success
2062  **/
2063 static struct lpfc_nvme_buf *
2064 lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
2065 {
2066 	struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
2067 	unsigned long iflag = 0;
2068 	int found = 0;
2069 
2070 	spin_lock_irqsave(&phba->nvme_buf_list_get_lock, iflag);
2071 	list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
2072 				 &phba->lpfc_nvme_buf_list_get, list) {
2073 		if (lpfc_test_rrq_active(phba, ndlp,
2074 					 lpfc_ncmd->cur_iocbq.sli4_lxritag))
2075 			continue;
2076 		list_del_init(&lpfc_ncmd->list);
2077 		found = 1;
2078 		break;
2079 	}
2080 	if (!found) {
2081 		spin_lock(&phba->nvme_buf_list_put_lock);
2082 		list_splice(&phba->lpfc_nvme_buf_list_put,
2083 			    &phba->lpfc_nvme_buf_list_get);
2084 		INIT_LIST_HEAD(&phba->lpfc_nvme_buf_list_put);
2085 		spin_unlock(&phba->nvme_buf_list_put_lock);
2086 		list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
2087 					 &phba->lpfc_nvme_buf_list_get, list) {
2088 			if (lpfc_test_rrq_active(
2089 				phba, ndlp, lpfc_ncmd->cur_iocbq.sli4_lxritag))
2090 				continue;
2091 			list_del_init(&lpfc_ncmd->list);
2092 			found = 1;
2093 			break;
2094 		}
2095 	}
2096 	spin_unlock_irqrestore(&phba->nvme_buf_list_get_lock, iflag);
2097 	if (!found)
2098 		return NULL;
2099 	return  lpfc_ncmd;
2100 }
2101 
2102 /**
2103  * lpfc_release_nvme_buf: Return a nvme buffer back to hba nvme buf list.
2104  * @phba: The Hba for which this call is being executed.
2105  * @lpfc_ncmd: The nvme buffer which is being released.
2106  *
2107  * This routine releases @lpfc_ncmd nvme buffer by adding it to tail of @phba
2108  * lpfc_nvme_buf_list list. For SLI4 XRI's are tied to the nvme buffer
2109  * and cannot be reused for at least RA_TOV amount of time if it was
2110  * aborted.
2111  **/
2112 static void
2113 lpfc_release_nvme_buf(struct lpfc_hba *phba, struct lpfc_nvme_buf *lpfc_ncmd)
2114 {
2115 	unsigned long iflag = 0;
2116 
2117 	lpfc_ncmd->nonsg_phys = 0;
2118 	if (lpfc_ncmd->flags & LPFC_SBUF_XBUSY) {
2119 		lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
2120 				"6310 XB release deferred for "
2121 				"ox_id x%x on reqtag x%x\n",
2122 				lpfc_ncmd->cur_iocbq.sli4_xritag,
2123 				lpfc_ncmd->cur_iocbq.iotag);
2124 
2125 		spin_lock_irqsave(&phba->sli4_hba.abts_nvme_buf_list_lock,
2126 					iflag);
2127 		lpfc_ncmd->nvmeCmd = NULL;
2128 		list_add_tail(&lpfc_ncmd->list,
2129 			&phba->sli4_hba.lpfc_abts_nvme_buf_list);
2130 		spin_unlock_irqrestore(&phba->sli4_hba.abts_nvme_buf_list_lock,
2131 					iflag);
2132 	} else {
2133 		lpfc_ncmd->nvmeCmd = NULL;
2134 		lpfc_ncmd->cur_iocbq.iocb_flag = LPFC_IO_NVME;
2135 		spin_lock_irqsave(&phba->nvme_buf_list_put_lock, iflag);
2136 		list_add_tail(&lpfc_ncmd->list, &phba->lpfc_nvme_buf_list_put);
2137 		spin_unlock_irqrestore(&phba->nvme_buf_list_put_lock, iflag);
2138 	}
2139 }
2140 
2141 /**
2142  * lpfc_nvme_create_localport - Create/Bind an nvme localport instance.
2143  * @pvport - the lpfc_vport instance requesting a localport.
2144  *
2145  * This routine is invoked to create an nvme localport instance to bind
2146  * to the nvme_fc_transport.  It is called once during driver load
2147  * like lpfc_create_shost after all other services are initialized.
2148  * It requires a vport, vpi, and wwns at call time.  Other localport
2149  * parameters are modified as the driver's FCID and the Fabric WWN
2150  * are established.
2151  *
2152  * Return codes
2153  *      0 - successful
2154  *      -ENOMEM - no heap memory available
2155  *      other values - from nvme registration upcall
2156  **/
2157 int
2158 lpfc_nvme_create_localport(struct lpfc_vport *vport)
2159 {
2160 	int ret = 0;
2161 	struct lpfc_hba  *phba = vport->phba;
2162 	struct nvme_fc_port_info nfcp_info;
2163 	struct nvme_fc_local_port *localport;
2164 	struct lpfc_nvme_lport *lport;
2165 	int len;
2166 
2167 	/* Initialize this localport instance.  The vport wwn usage ensures
2168 	 * that NPIV is accounted for.
2169 	 */
2170 	memset(&nfcp_info, 0, sizeof(struct nvme_fc_port_info));
2171 	nfcp_info.port_role = FC_PORT_ROLE_NVME_INITIATOR;
2172 	nfcp_info.node_name = wwn_to_u64(vport->fc_nodename.u.wwn);
2173 	nfcp_info.port_name = wwn_to_u64(vport->fc_portname.u.wwn);
2174 
2175 	/* Limit to LPFC_MAX_NVME_SEG_CNT.
2176 	 * For now need + 1 to get around NVME transport logic.
2177 	 */
2178 	if (phba->cfg_sg_seg_cnt > LPFC_MAX_NVME_SEG_CNT) {
2179 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME | LOG_INIT,
2180 				 "6300 Reducing sg segment cnt to %d\n",
2181 				 LPFC_MAX_NVME_SEG_CNT);
2182 		phba->cfg_nvme_seg_cnt = LPFC_MAX_NVME_SEG_CNT;
2183 	} else {
2184 		phba->cfg_nvme_seg_cnt = phba->cfg_sg_seg_cnt;
2185 	}
2186 	lpfc_nvme_template.max_sgl_segments = phba->cfg_nvme_seg_cnt + 1;
2187 	lpfc_nvme_template.max_hw_queues = phba->cfg_nvme_io_channel;
2188 
2189 	/* localport is allocated from the stack, but the registration
2190 	 * call allocates heap memory as well as the private area.
2191 	 */
2192 #if (IS_ENABLED(CONFIG_NVME_FC))
2193 	ret = nvme_fc_register_localport(&nfcp_info, &lpfc_nvme_template,
2194 					 &vport->phba->pcidev->dev, &localport);
2195 #else
2196 	ret = -ENOMEM;
2197 #endif
2198 	if (!ret) {
2199 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME | LOG_NVME_DISC,
2200 				 "6005 Successfully registered local "
2201 				 "NVME port num %d, localP %p, private %p, "
2202 				 "sg_seg %d\n",
2203 				 localport->port_num, localport,
2204 				 localport->private,
2205 				 lpfc_nvme_template.max_sgl_segments);
2206 
2207 		/* Private is our lport size declared in the template. */
2208 		lport = (struct lpfc_nvme_lport *)localport->private;
2209 		vport->localport = localport;
2210 		lport->vport = vport;
2211 		INIT_LIST_HEAD(&lport->rport_list);
2212 		vport->nvmei_support = 1;
2213 		len  = lpfc_new_nvme_buf(vport, phba->sli4_hba.nvme_xri_max);
2214 		vport->phba->total_nvme_bufs += len;
2215 	}
2216 
2217 	return ret;
2218 }
2219 
2220 /**
2221  * lpfc_nvme_destroy_localport - Destroy lpfc_nvme bound to nvme transport.
2222  * @pnvme: pointer to lpfc nvme data structure.
2223  *
2224  * This routine is invoked to destroy all lports bound to the phba.
2225  * The lport memory was allocated by the nvme fc transport and is
2226  * released there.  This routine ensures all rports bound to the
2227  * lport have been disconnected.
2228  *
2229  **/
2230 void
2231 lpfc_nvme_destroy_localport(struct lpfc_vport *vport)
2232 {
2233 #if (IS_ENABLED(CONFIG_NVME_FC))
2234 	struct nvme_fc_local_port *localport;
2235 	struct lpfc_nvme_lport *lport;
2236 	struct lpfc_nvme_rport *rport = NULL, *rport_next = NULL;
2237 	int ret;
2238 
2239 	if (vport->nvmei_support == 0)
2240 		return;
2241 
2242 	localport = vport->localport;
2243 	vport->localport = NULL;
2244 	lport = (struct lpfc_nvme_lport *)localport->private;
2245 
2246 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
2247 			 "6011 Destroying NVME localport %p\n",
2248 			 localport);
2249 	list_for_each_entry_safe(rport, rport_next, &lport->rport_list, list) {
2250 		/* The last node ref has to get released now before the rport
2251 		 * private memory area is released by the transport.
2252 		 */
2253 		list_del(&rport->list);
2254 
2255 		init_completion(&rport->rport_unreg_done);
2256 		ret = nvme_fc_unregister_remoteport(rport->remoteport);
2257 		if (ret)
2258 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
2259 					 "6008 rport fail destroy %x\n", ret);
2260 		wait_for_completion_timeout(&rport->rport_unreg_done, 5);
2261 	}
2262 
2263 	/* lport's rport list is clear.  Unregister
2264 	 * lport and release resources.
2265 	 */
2266 	init_completion(&lport->lport_unreg_done);
2267 	ret = nvme_fc_unregister_localport(localport);
2268 	wait_for_completion_timeout(&lport->lport_unreg_done, 5);
2269 
2270 	/* Regardless of the unregister upcall response, clear
2271 	 * nvmei_support.  All rports are unregistered and the
2272 	 * driver will clean up.
2273 	 */
2274 	vport->nvmei_support = 0;
2275 	if (ret == 0) {
2276 		lpfc_printf_vlog(vport,
2277 				 KERN_INFO, LOG_NVME_DISC,
2278 				 "6009 Unregistered lport Success\n");
2279 	} else {
2280 		lpfc_printf_vlog(vport,
2281 				 KERN_INFO, LOG_NVME_DISC,
2282 				 "6010 Unregistered lport "
2283 				 "Failed, status x%x\n",
2284 				 ret);
2285 	}
2286 #endif
2287 }
2288 
2289 void
2290 lpfc_nvme_update_localport(struct lpfc_vport *vport)
2291 {
2292 #if (IS_ENABLED(CONFIG_NVME_FC))
2293 	struct nvme_fc_local_port *localport;
2294 	struct lpfc_nvme_lport *lport;
2295 
2296 	localport = vport->localport;
2297 	if (!localport) {
2298 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_NVME,
2299 				 "6710 Update NVME fail. No localport\n");
2300 		return;
2301 	}
2302 	lport = (struct lpfc_nvme_lport *)localport->private;
2303 	if (!lport) {
2304 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_NVME,
2305 				 "6171 Update NVME fail. localP %p, No lport\n",
2306 				 localport);
2307 		return;
2308 	}
2309 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
2310 			 "6012 Update NVME lport %p did x%x\n",
2311 			 localport, vport->fc_myDID);
2312 
2313 	localport->port_id = vport->fc_myDID;
2314 	if (localport->port_id == 0)
2315 		localport->port_role = FC_PORT_ROLE_NVME_DISCOVERY;
2316 	else
2317 		localport->port_role = FC_PORT_ROLE_NVME_INITIATOR;
2318 
2319 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
2320 			 "6030 bound lport %p to DID x%06x\n",
2321 			 lport, localport->port_id);
2322 #endif
2323 }
2324 
2325 int
2326 lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
2327 {
2328 #if (IS_ENABLED(CONFIG_NVME_FC))
2329 	int ret = 0;
2330 	struct nvme_fc_local_port *localport;
2331 	struct lpfc_nvme_lport *lport;
2332 	struct lpfc_nvme_rport *rport;
2333 	struct nvme_fc_remote_port *remote_port;
2334 	struct nvme_fc_port_info rpinfo;
2335 
2336 	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NVME_DISC,
2337 			 "6006 Register NVME PORT. DID x%06x nlptype x%x\n",
2338 			 ndlp->nlp_DID, ndlp->nlp_type);
2339 
2340 	localport = vport->localport;
2341 	lport = (struct lpfc_nvme_lport *)localport->private;
2342 
2343 	if (ndlp->nlp_type & (NLP_NVME_TARGET | NLP_NVME_INITIATOR)) {
2344 
2345 		/* The driver isn't expecting the rport wwn to change
2346 		 * but it might get a different DID on a different
2347 		 * fabric.
2348 		 */
2349 		list_for_each_entry(rport, &lport->rport_list, list) {
2350 			if (rport->remoteport->port_name !=
2351 			    wwn_to_u64(ndlp->nlp_portname.u.wwn))
2352 				continue;
2353 			lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NVME_DISC,
2354 					 "6035 lport %p, found matching rport "
2355 					 "at wwpn 0x%llx, Data: x%x x%x x%x "
2356 					 "x%06x\n",
2357 					 lport,
2358 					 rport->remoteport->port_name,
2359 					 rport->remoteport->port_id,
2360 					 rport->remoteport->port_role,
2361 					 ndlp->nlp_type,
2362 					 ndlp->nlp_DID);
2363 			remote_port = rport->remoteport;
2364 			if ((remote_port->port_id == 0) &&
2365 			    (remote_port->port_role ==
2366 			     FC_PORT_ROLE_NVME_DISCOVERY)) {
2367 				remote_port->port_id = ndlp->nlp_DID;
2368 				remote_port->port_role &=
2369 					~FC_PORT_ROLE_NVME_DISCOVERY;
2370 				if (ndlp->nlp_type & NLP_NVME_TARGET)
2371 					remote_port->port_role |=
2372 						FC_PORT_ROLE_NVME_TARGET;
2373 				if (ndlp->nlp_type & NLP_NVME_INITIATOR)
2374 					remote_port->port_role |=
2375 						FC_PORT_ROLE_NVME_INITIATOR;
2376 
2377 				lpfc_printf_vlog(ndlp->vport, KERN_INFO,
2378 						 LOG_NVME_DISC,
2379 						 "6014 Rebinding lport to "
2380 						 "rport wwpn 0x%llx, "
2381 						 "Data: x%x x%x x%x x%06x\n",
2382 						 remote_port->port_name,
2383 						 remote_port->port_id,
2384 						 remote_port->port_role,
2385 						 ndlp->nlp_type,
2386 						 ndlp->nlp_DID);
2387 			}
2388 			return 0;
2389 		}
2390 
2391 		/* NVME rports are not preserved across devloss.
2392 		 * Just register this instance.
2393 		 */
2394 		rpinfo.port_id = ndlp->nlp_DID;
2395 		rpinfo.port_role = 0;
2396 		if (ndlp->nlp_type & NLP_NVME_TARGET)
2397 			rpinfo.port_role |= FC_PORT_ROLE_NVME_TARGET;
2398 		if (ndlp->nlp_type & NLP_NVME_INITIATOR)
2399 			rpinfo.port_role |= FC_PORT_ROLE_NVME_INITIATOR;
2400 		rpinfo.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn);
2401 		rpinfo.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn);
2402 		ret = nvme_fc_register_remoteport(localport, &rpinfo,
2403 						  &remote_port);
2404 		if (!ret) {
2405 			rport = remote_port->private;
2406 			rport->remoteport = remote_port;
2407 			rport->lport = lport;
2408 			rport->ndlp = lpfc_nlp_get(ndlp);
2409 			if (!rport->ndlp)
2410 				return -1;
2411 			ndlp->nrport = rport;
2412 			INIT_LIST_HEAD(&rport->list);
2413 			list_add_tail(&rport->list, &lport->rport_list);
2414 			lpfc_printf_vlog(vport, KERN_INFO,
2415 					 LOG_NVME_DISC | LOG_NODE,
2416 					 "6022 Binding new rport to lport %p "
2417 					 "Rport WWNN 0x%llx, Rport WWPN 0x%llx "
2418 					 "DID x%06x Role x%x\n",
2419 					 lport,
2420 					 rpinfo.node_name, rpinfo.port_name,
2421 					 rpinfo.port_id, rpinfo.port_role);
2422 		} else {
2423 			lpfc_printf_vlog(vport, KERN_ERR,
2424 					 LOG_NVME_DISC | LOG_NODE,
2425 					 "6031 RemotePort Registration failed "
2426 					 "err: %d, DID x%06x\n",
2427 					 ret, ndlp->nlp_DID);
2428 		}
2429 	} else {
2430 		ret = -EINVAL;
2431 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
2432 				 "6027 Unknown nlp_type x%x on DID x%06x "
2433 				 "ndlp %p.  Not Registering nvme rport\n",
2434 				 ndlp->nlp_type, ndlp->nlp_DID, ndlp);
2435 	}
2436 	return ret;
2437 #else
2438 	return 0;
2439 #endif
2440 }
2441 
2442 /* lpfc_nvme_unregister_port - unbind the DID and port_role from this rport.
2443  *
2444  * There is no notion of Devloss or rport recovery from the current
2445  * nvme_transport perspective.  Loss of an rport just means IO cannot
2446  * be sent and recovery is completely up to the initator.
2447  * For now, the driver just unbinds the DID and port_role so that
2448  * no further IO can be issued.  Changes are planned for later.
2449  *
2450  * Notes - the ndlp reference count is not decremented here since
2451  * since there is no nvme_transport api for devloss.  Node ref count
2452  * is only adjusted in driver unload.
2453  */
2454 void
2455 lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
2456 {
2457 #if (IS_ENABLED(CONFIG_NVME_FC))
2458 	int ret;
2459 	struct nvme_fc_local_port *localport;
2460 	struct lpfc_nvme_lport *lport;
2461 	struct lpfc_nvme_rport *rport;
2462 	struct nvme_fc_remote_port *remoteport;
2463 	unsigned long wait_tmo;
2464 
2465 	localport = vport->localport;
2466 
2467 	/* This is fundamental error.  The localport is always
2468 	 * available until driver unload.  Just exit.
2469 	 */
2470 	if (!localport)
2471 		return;
2472 
2473 	lport = (struct lpfc_nvme_lport *)localport->private;
2474 	if (!lport)
2475 		goto input_err;
2476 
2477 	rport = ndlp->nrport;
2478 	if (!rport)
2479 		goto input_err;
2480 
2481 	remoteport = rport->remoteport;
2482 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
2483 			 "6033 Unreg nvme remoteport %p, portname x%llx, "
2484 			 "port_id x%06x, portstate x%x port type x%x\n",
2485 			 remoteport, remoteport->port_name,
2486 			 remoteport->port_id, remoteport->port_state,
2487 			 ndlp->nlp_type);
2488 
2489 	/* Sanity check ndlp type.  Only call for NVME ports. Don't
2490 	 * clear any rport state until the transport calls back.
2491 	 */
2492 	if (ndlp->nlp_type & (NLP_NVME_TARGET | NLP_NVME_INITIATOR)) {
2493 		init_completion(&rport->rport_unreg_done);
2494 		ret = nvme_fc_unregister_remoteport(remoteport);
2495 		if (ret != 0) {
2496 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
2497 					 "6167 NVME unregister failed %d "
2498 					 "port_state x%x\n",
2499 					 ret, remoteport->port_state);
2500 		}
2501 
2502 		/* Wait for the driver's delete completion routine to finish
2503 		 * before proceeding.  This guarantees the transport and driver
2504 		 * have completed the unreg process.
2505 		 */
2506 		wait_tmo = msecs_to_jiffies(5000);
2507 		ret = wait_for_completion_timeout(&rport->rport_unreg_done,
2508 						  wait_tmo);
2509 		if (ret == 0) {
2510 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
2511 					 "6169 Unreg nvme wait timeout\n");
2512 		}
2513 	}
2514 	return;
2515 
2516  input_err:
2517 #endif
2518 	lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
2519 			 "6168 State error: lport %p, rport%p FCID x%06x\n",
2520 			 vport->localport, ndlp->rport, ndlp->nlp_DID);
2521 }
2522 
2523 /**
2524  * lpfc_sli4_nvme_xri_aborted - Fast-path process of NVME xri abort
2525  * @phba: pointer to lpfc hba data structure.
2526  * @axri: pointer to the fcp xri abort wcqe structure.
2527  *
2528  * This routine is invoked by the worker thread to process a SLI4 fast-path
2529  * FCP aborted xri.
2530  **/
2531 void
2532 lpfc_sli4_nvme_xri_aborted(struct lpfc_hba *phba,
2533 			   struct sli4_wcqe_xri_aborted *axri)
2534 {
2535 	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
2536 	uint16_t rxid = bf_get(lpfc_wcqe_xa_remote_xid, axri);
2537 	struct lpfc_nvme_buf *lpfc_ncmd, *next_lpfc_ncmd;
2538 	struct lpfc_nodelist *ndlp;
2539 	unsigned long iflag = 0;
2540 	int rrq_empty = 0;
2541 
2542 	if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME))
2543 		return;
2544 	spin_lock_irqsave(&phba->hbalock, iflag);
2545 	spin_lock(&phba->sli4_hba.abts_nvme_buf_list_lock);
2546 	list_for_each_entry_safe(lpfc_ncmd, next_lpfc_ncmd,
2547 				 &phba->sli4_hba.lpfc_abts_nvme_buf_list,
2548 				 list) {
2549 		if (lpfc_ncmd->cur_iocbq.sli4_xritag == xri) {
2550 			list_del_init(&lpfc_ncmd->list);
2551 			lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
2552 			lpfc_ncmd->status = IOSTAT_SUCCESS;
2553 			spin_unlock(
2554 				&phba->sli4_hba.abts_nvme_buf_list_lock);
2555 
2556 			rrq_empty = list_empty(&phba->active_rrq_list);
2557 			spin_unlock_irqrestore(&phba->hbalock, iflag);
2558 			ndlp = lpfc_ncmd->ndlp;
2559 			if (ndlp) {
2560 				lpfc_set_rrq_active(
2561 					phba, ndlp,
2562 					lpfc_ncmd->cur_iocbq.sli4_lxritag,
2563 					rxid, 1);
2564 				lpfc_sli4_abts_err_handler(phba, ndlp, axri);
2565 			}
2566 
2567 			lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
2568 					"6311 XRI Aborted xri x%x tag x%x "
2569 					"released\n",
2570 					xri, lpfc_ncmd->cur_iocbq.iotag);
2571 
2572 			lpfc_release_nvme_buf(phba, lpfc_ncmd);
2573 			if (rrq_empty)
2574 				lpfc_worker_wake_up(phba);
2575 			return;
2576 		}
2577 	}
2578 	spin_unlock(&phba->sli4_hba.abts_nvme_buf_list_lock);
2579 	spin_unlock_irqrestore(&phba->hbalock, iflag);
2580 
2581 	lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
2582 			"6312 XRI Aborted xri x%x not found\n", xri);
2583 
2584 }
2585