xref: /openbmc/linux/drivers/scsi/lpfc/lpfc_nvme.c (revision 4da722ca)
1 /*******************************************************************
2  * This file is part of the Emulex Linux Device Driver for         *
3  * Fibre Channel Host Bus Adapters.                                *
4  * Copyright (C) 2017 Broadcom. All Rights Reserved. The term      *
5  * “Broadcom” refers to Broadcom Limited and/or its subsidiaries.  *
6  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
7  * EMULEX and SLI are trademarks of Emulex.                        *
8  * www.broadcom.com                                                *
9  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
10  *                                                                 *
11  * This program is free software; you can redistribute it and/or   *
12  * modify it under the terms of version 2 of the GNU General       *
13  * Public License as published by the Free Software Foundation.    *
14  * This program is distributed in the hope that it will be useful. *
15  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
16  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
17  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
18  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
19  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
20  * more details, a copy of which can be found in the file COPYING  *
21  * included with this package.                                     *
22  ********************************************************************/
23 #include <linux/pci.h>
24 #include <linux/slab.h>
25 #include <linux/interrupt.h>
26 #include <linux/delay.h>
27 #include <asm/unaligned.h>
28 #include <linux/crc-t10dif.h>
29 #include <net/checksum.h>
30 
31 #include <scsi/scsi.h>
32 #include <scsi/scsi_device.h>
33 #include <scsi/scsi_eh.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_tcq.h>
36 #include <scsi/scsi_transport_fc.h>
37 #include <scsi/fc/fc_fs.h>
38 
39 #include <linux/nvme.h>
40 #include <linux/nvme-fc-driver.h>
41 #include <linux/nvme-fc.h>
42 #include "lpfc_version.h"
43 #include "lpfc_hw4.h"
44 #include "lpfc_hw.h"
45 #include "lpfc_sli.h"
46 #include "lpfc_sli4.h"
47 #include "lpfc_nl.h"
48 #include "lpfc_disc.h"
49 #include "lpfc.h"
50 #include "lpfc_nvme.h"
51 #include "lpfc_scsi.h"
52 #include "lpfc_logmsg.h"
53 #include "lpfc_crtn.h"
54 #include "lpfc_vport.h"
55 #include "lpfc_debugfs.h"
56 
57 /* NVME initiator-based functions */
58 
59 static struct lpfc_nvme_buf *
60 lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp);
61 
62 static void
63 lpfc_release_nvme_buf(struct lpfc_hba *, struct lpfc_nvme_buf *);
64 
65 
66 /**
67  * lpfc_nvme_create_queue -
68  * @lpfc_pnvme: Pointer to the driver's nvme instance data
69  * @qidx: An cpu index used to affinitize IO queues and MSIX vectors.
70  * @handle: An opaque driver handle used in follow-up calls.
71  *
72  * Driver registers this routine to preallocate and initialize any
73  * internal data structures to bind the @qidx to its internal IO queues.
74  * A hardware queue maps (qidx) to a specific driver MSI-X vector/EQ/CQ/WQ.
75  *
76  * Return value :
77  *   0 - Success
78  *   -EINVAL - Unsupported input value.
79  *   -ENOMEM - Could not alloc necessary memory
80  **/
81 static int
82 lpfc_nvme_create_queue(struct nvme_fc_local_port *pnvme_lport,
83 		       unsigned int qidx, u16 qsize,
84 		       void **handle)
85 {
86 	struct lpfc_nvme_lport *lport;
87 	struct lpfc_vport *vport;
88 	struct lpfc_nvme_qhandle *qhandle;
89 	char *str;
90 
91 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
92 	vport = lport->vport;
93 	qhandle = kzalloc(sizeof(struct lpfc_nvme_qhandle), GFP_KERNEL);
94 	if (qhandle == NULL)
95 		return -ENOMEM;
96 
97 	qhandle->cpu_id = smp_processor_id();
98 	qhandle->qidx = qidx;
99 	/*
100 	 * NVME qidx == 0 is the admin queue, so both admin queue
101 	 * and first IO queue will use MSI-X vector and associated
102 	 * EQ/CQ/WQ at index 0. After that they are sequentially assigned.
103 	 */
104 	if (qidx) {
105 		str = "IO ";  /* IO queue */
106 		qhandle->index = ((qidx - 1) %
107 			vport->phba->cfg_nvme_io_channel);
108 	} else {
109 		str = "ADM";  /* Admin queue */
110 		qhandle->index = qidx;
111 	}
112 
113 	lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
114 			 "6073 Binding %s HdwQueue %d  (cpu %d) to "
115 			 "io_channel %d qhandle %p\n", str,
116 			 qidx, qhandle->cpu_id, qhandle->index, qhandle);
117 	*handle = (void *)qhandle;
118 	return 0;
119 }
120 
121 /**
122  * lpfc_nvme_delete_queue -
123  * @lpfc_pnvme: Pointer to the driver's nvme instance data
124  * @qidx: An cpu index used to affinitize IO queues and MSIX vectors.
125  * @handle: An opaque driver handle from lpfc_nvme_create_queue
126  *
127  * Driver registers this routine to free
128  * any internal data structures to bind the @qidx to its internal
129  * IO queues.
130  *
131  * Return value :
132  *   0 - Success
133  *   TODO:  What are the failure codes.
134  **/
135 static void
136 lpfc_nvme_delete_queue(struct nvme_fc_local_port *pnvme_lport,
137 		       unsigned int qidx,
138 		       void *handle)
139 {
140 	struct lpfc_nvme_lport *lport;
141 	struct lpfc_vport *vport;
142 
143 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
144 	vport = lport->vport;
145 
146 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
147 			"6001 ENTER.  lpfc_pnvme %p, qidx x%xi qhandle %p\n",
148 			lport, qidx, handle);
149 	kfree(handle);
150 }
151 
152 static void
153 lpfc_nvme_localport_delete(struct nvme_fc_local_port *localport)
154 {
155 	struct lpfc_nvme_lport *lport = localport->private;
156 
157 	/* release any threads waiting for the unreg to complete */
158 	complete(&lport->lport_unreg_done);
159 }
160 
161 /* lpfc_nvme_remoteport_delete
162  *
163  * @remoteport: Pointer to an nvme transport remoteport instance.
164  *
165  * This is a template downcall.  NVME transport calls this function
166  * when it has completed the unregistration of a previously
167  * registered remoteport.
168  *
169  * Return value :
170  * None
171  */
172 void
173 lpfc_nvme_remoteport_delete(struct nvme_fc_remote_port *remoteport)
174 {
175 	struct lpfc_nvme_rport *rport = remoteport->private;
176 	struct lpfc_vport *vport;
177 	struct lpfc_nodelist *ndlp;
178 
179 	ndlp = rport->ndlp;
180 	if (!ndlp)
181 		goto rport_err;
182 
183 	vport = ndlp->vport;
184 	if (!vport)
185 		goto rport_err;
186 
187 	/* Remove this rport from the lport's list - memory is owned by the
188 	 * transport. Remove the ndlp reference for the NVME transport before
189 	 * calling state machine to remove the node.
190 	 */
191 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
192 			"6146 remoteport delete complete %p\n",
193 			remoteport);
194 	ndlp->nrport = NULL;
195 	lpfc_nlp_put(ndlp);
196 
197  rport_err:
198 	/* This call has to execute as long as the rport is valid.
199 	 * Release any threads waiting for the unreg to complete.
200 	 */
201 	complete(&rport->rport_unreg_done);
202 }
203 
204 static void
205 lpfc_nvme_cmpl_gen_req(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
206 		       struct lpfc_wcqe_complete *wcqe)
207 {
208 	struct lpfc_vport *vport = cmdwqe->vport;
209 	uint32_t status;
210 	struct nvmefc_ls_req *pnvme_lsreq;
211 	struct lpfc_dmabuf *buf_ptr;
212 	struct lpfc_nodelist *ndlp;
213 
214 	atomic_inc(&vport->phba->fc4NvmeLsCmpls);
215 
216 	pnvme_lsreq = (struct nvmefc_ls_req *)cmdwqe->context2;
217 	status = bf_get(lpfc_wcqe_c_status, wcqe) & LPFC_IOCB_STATUS_MASK;
218 	ndlp = (struct lpfc_nodelist *)cmdwqe->context1;
219 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
220 			 "6047 nvme cmpl Enter "
221 			 "Data %p DID %x Xri: %x status %x cmd:%p lsreg:%p "
222 			 "bmp:%p ndlp:%p\n",
223 			 pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
224 			 cmdwqe->sli4_xritag, status,
225 			 cmdwqe, pnvme_lsreq, cmdwqe->context3, ndlp);
226 
227 	lpfc_nvmeio_data(phba, "NVME LS  CMPL: xri x%x stat x%x parm x%x\n",
228 			 cmdwqe->sli4_xritag, status, wcqe->parameter);
229 
230 	if (cmdwqe->context3) {
231 		buf_ptr = (struct lpfc_dmabuf *)cmdwqe->context3;
232 		lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
233 		kfree(buf_ptr);
234 		cmdwqe->context3 = NULL;
235 	}
236 	if (pnvme_lsreq->done)
237 		pnvme_lsreq->done(pnvme_lsreq, status);
238 	else
239 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
240 				 "6046 nvme cmpl without done call back? "
241 				 "Data %p DID %x Xri: %x status %x\n",
242 				pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
243 				cmdwqe->sli4_xritag, status);
244 	if (ndlp) {
245 		lpfc_nlp_put(ndlp);
246 		cmdwqe->context1 = NULL;
247 	}
248 	lpfc_sli_release_iocbq(phba, cmdwqe);
249 }
250 
251 static int
252 lpfc_nvme_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
253 		  struct lpfc_dmabuf *inp,
254 		 struct nvmefc_ls_req *pnvme_lsreq,
255 	     void (*cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
256 			   struct lpfc_wcqe_complete *),
257 	     struct lpfc_nodelist *ndlp, uint32_t num_entry,
258 	     uint32_t tmo, uint8_t retry)
259 {
260 	struct lpfc_hba  *phba = vport->phba;
261 	union lpfc_wqe *wqe;
262 	struct lpfc_iocbq *genwqe;
263 	struct ulp_bde64 *bpl;
264 	struct ulp_bde64 bde;
265 	int i, rc, xmit_len, first_len;
266 
267 	/* Allocate buffer for  command WQE */
268 	genwqe = lpfc_sli_get_iocbq(phba);
269 	if (genwqe == NULL)
270 		return 1;
271 
272 	wqe = &genwqe->wqe;
273 	memset(wqe, 0, sizeof(union lpfc_wqe));
274 
275 	genwqe->context3 = (uint8_t *)bmp;
276 	genwqe->iocb_flag |= LPFC_IO_NVME_LS;
277 
278 	/* Save for completion so we can release these resources */
279 	genwqe->context1 = lpfc_nlp_get(ndlp);
280 	genwqe->context2 = (uint8_t *)pnvme_lsreq;
281 	/* Fill in payload, bp points to frame payload */
282 
283 	if (!tmo)
284 		/* FC spec states we need 3 * ratov for CT requests */
285 		tmo = (3 * phba->fc_ratov);
286 
287 	/* For this command calculate the xmit length of the request bde. */
288 	xmit_len = 0;
289 	first_len = 0;
290 	bpl = (struct ulp_bde64 *)bmp->virt;
291 	for (i = 0; i < num_entry; i++) {
292 		bde.tus.w = bpl[i].tus.w;
293 		if (bde.tus.f.bdeFlags != BUFF_TYPE_BDE_64)
294 			break;
295 		xmit_len += bde.tus.f.bdeSize;
296 		if (i == 0)
297 			first_len = xmit_len;
298 	}
299 
300 	genwqe->rsvd2 = num_entry;
301 	genwqe->hba_wqidx = 0;
302 
303 	/* Words 0 - 2 */
304 	wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
305 	wqe->generic.bde.tus.f.bdeSize = first_len;
306 	wqe->generic.bde.addrLow = bpl[0].addrLow;
307 	wqe->generic.bde.addrHigh = bpl[0].addrHigh;
308 
309 	/* Word 3 */
310 	wqe->gen_req.request_payload_len = first_len;
311 
312 	/* Word 4 */
313 
314 	/* Word 5 */
315 	bf_set(wqe_dfctl, &wqe->gen_req.wge_ctl, 0);
316 	bf_set(wqe_si, &wqe->gen_req.wge_ctl, 1);
317 	bf_set(wqe_la, &wqe->gen_req.wge_ctl, 1);
318 	bf_set(wqe_rctl, &wqe->gen_req.wge_ctl, FC_RCTL_ELS4_REQ);
319 	bf_set(wqe_type, &wqe->gen_req.wge_ctl, FC_TYPE_NVME);
320 
321 	/* Word 6 */
322 	bf_set(wqe_ctxt_tag, &wqe->gen_req.wqe_com,
323 	       phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
324 	bf_set(wqe_xri_tag, &wqe->gen_req.wqe_com, genwqe->sli4_xritag);
325 
326 	/* Word 7 */
327 	bf_set(wqe_tmo, &wqe->gen_req.wqe_com, (vport->phba->fc_ratov-1));
328 	bf_set(wqe_class, &wqe->gen_req.wqe_com, CLASS3);
329 	bf_set(wqe_cmnd, &wqe->gen_req.wqe_com, CMD_GEN_REQUEST64_WQE);
330 	bf_set(wqe_ct, &wqe->gen_req.wqe_com, SLI4_CT_RPI);
331 
332 	/* Word 8 */
333 	wqe->gen_req.wqe_com.abort_tag = genwqe->iotag;
334 
335 	/* Word 9 */
336 	bf_set(wqe_reqtag, &wqe->gen_req.wqe_com, genwqe->iotag);
337 
338 	/* Word 10 */
339 	bf_set(wqe_dbde, &wqe->gen_req.wqe_com, 1);
340 	bf_set(wqe_iod, &wqe->gen_req.wqe_com, LPFC_WQE_IOD_READ);
341 	bf_set(wqe_qosd, &wqe->gen_req.wqe_com, 1);
342 	bf_set(wqe_lenloc, &wqe->gen_req.wqe_com, LPFC_WQE_LENLOC_NONE);
343 	bf_set(wqe_ebde_cnt, &wqe->gen_req.wqe_com, 0);
344 
345 	/* Word 11 */
346 	bf_set(wqe_cqid, &wqe->gen_req.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
347 	bf_set(wqe_cmd_type, &wqe->gen_req.wqe_com, OTHER_COMMAND);
348 
349 
350 	/* Issue GEN REQ WQE for NPORT <did> */
351 	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
352 			 "6050 Issue GEN REQ WQE to NPORT x%x "
353 			 "Data: x%x x%x wq:%p lsreq:%p bmp:%p xmit:%d 1st:%d\n",
354 			 ndlp->nlp_DID, genwqe->iotag,
355 			 vport->port_state,
356 			genwqe, pnvme_lsreq, bmp, xmit_len, first_len);
357 	genwqe->wqe_cmpl = cmpl;
358 	genwqe->iocb_cmpl = NULL;
359 	genwqe->drvrTimeout = tmo + LPFC_DRVR_TIMEOUT;
360 	genwqe->vport = vport;
361 	genwqe->retry = retry;
362 
363 	lpfc_nvmeio_data(phba, "NVME LS  XMIT: xri x%x iotag x%x to x%06x\n",
364 			 genwqe->sli4_xritag, genwqe->iotag, ndlp->nlp_DID);
365 
366 	rc = lpfc_sli4_issue_wqe(phba, LPFC_ELS_RING, genwqe);
367 	if (rc == WQE_ERROR) {
368 		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
369 				 "6045 Issue GEN REQ WQE to NPORT x%x "
370 				 "Data: x%x x%x\n",
371 				 ndlp->nlp_DID, genwqe->iotag,
372 				 vport->port_state);
373 		lpfc_sli_release_iocbq(phba, genwqe);
374 		return 1;
375 	}
376 	return 0;
377 }
378 
379 /**
380  * lpfc_nvme_ls_req - Issue an Link Service request
381  * @lpfc_pnvme: Pointer to the driver's nvme instance data
382  * @lpfc_nvme_lport: Pointer to the driver's local port data
383  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
384  *
385  * Driver registers this routine to handle any link service request
386  * from the nvme_fc transport to a remote nvme-aware port.
387  *
388  * Return value :
389  *   0 - Success
390  *   TODO: What are the failure codes.
391  **/
392 static int
393 lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport,
394 		 struct nvme_fc_remote_port *pnvme_rport,
395 		 struct nvmefc_ls_req *pnvme_lsreq)
396 {
397 	int ret = 0;
398 	struct lpfc_nvme_lport *lport;
399 	struct lpfc_vport *vport;
400 	struct lpfc_nodelist *ndlp;
401 	struct ulp_bde64 *bpl;
402 	struct lpfc_dmabuf *bmp;
403 	uint16_t ntype, nstate;
404 
405 	/* there are two dma buf in the request, actually there is one and
406 	 * the second one is just the start address + cmd size.
407 	 * Before calling lpfc_nvme_gen_req these buffers need to be wrapped
408 	 * in a lpfc_dmabuf struct. When freeing we just free the wrapper
409 	 * because the nvem layer owns the data bufs.
410 	 * We do not have to break these packets open, we don't care what is in
411 	 * them. And we do not have to look at the resonse data, we only care
412 	 * that we got a response. All of the caring is going to happen in the
413 	 * nvme-fc layer.
414 	 */
415 
416 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
417 	vport = lport->vport;
418 
419 	ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
420 	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
421 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
422 				 "6051 DID x%06x not an active rport.\n",
423 				 pnvme_rport->port_id);
424 		return -ENODEV;
425 	}
426 
427 	/* The remote node has to be a mapped nvme target or an
428 	 * unmapped nvme initiator or it's an error.
429 	 */
430 	ntype = ndlp->nlp_type;
431 	nstate = ndlp->nlp_state;
432 	if ((ntype & NLP_NVME_TARGET && nstate != NLP_STE_MAPPED_NODE) ||
433 	    (ntype & NLP_NVME_INITIATOR && nstate != NLP_STE_UNMAPPED_NODE)) {
434 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
435 				 "6088 DID x%06x not ready for "
436 				 "IO. State x%x, Type x%x\n",
437 				 pnvme_rport->port_id,
438 				 ndlp->nlp_state, ndlp->nlp_type);
439 		return -ENODEV;
440 	}
441 	bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
442 	if (!bmp) {
443 
444 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
445 				 "6044 Could not find node for DID %x\n",
446 				 pnvme_rport->port_id);
447 		return 2;
448 	}
449 	INIT_LIST_HEAD(&bmp->list);
450 	bmp->virt = lpfc_mbuf_alloc(vport->phba, MEM_PRI, &(bmp->phys));
451 	if (!bmp->virt) {
452 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
453 				 "6042 Could not find node for DID %x\n",
454 				 pnvme_rport->port_id);
455 		kfree(bmp);
456 		return 3;
457 	}
458 	bpl = (struct ulp_bde64 *)bmp->virt;
459 	bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rqstdma));
460 	bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rqstdma));
461 	bpl->tus.f.bdeFlags = 0;
462 	bpl->tus.f.bdeSize = pnvme_lsreq->rqstlen;
463 	bpl->tus.w = le32_to_cpu(bpl->tus.w);
464 	bpl++;
465 
466 	bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rspdma));
467 	bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rspdma));
468 	bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
469 	bpl->tus.f.bdeSize = pnvme_lsreq->rsplen;
470 	bpl->tus.w = le32_to_cpu(bpl->tus.w);
471 
472 	/* Expand print to include key fields. */
473 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
474 			 "6149 ENTER.  lport %p, rport %p lsreq%p rqstlen:%d "
475 			 "rsplen:%d %pad %pad\n",
476 			 pnvme_lport, pnvme_rport,
477 			 pnvme_lsreq, pnvme_lsreq->rqstlen,
478 			 pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma,
479 			 &pnvme_lsreq->rspdma);
480 
481 	atomic_inc(&vport->phba->fc4NvmeLsRequests);
482 
483 	/* Hardcode the wait to 30 seconds.  Connections are failing otherwise.
484 	 * This code allows it all to work.
485 	 */
486 	ret = lpfc_nvme_gen_req(vport, bmp, pnvme_lsreq->rqstaddr,
487 				pnvme_lsreq, lpfc_nvme_cmpl_gen_req,
488 				ndlp, 2, 30, 0);
489 	if (ret != WQE_SUCCESS) {
490 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
491 				 "6052 EXIT. issue ls wqe failed lport %p, "
492 				 "rport %p lsreq%p Status %x DID %x\n",
493 				 pnvme_lport, pnvme_rport, pnvme_lsreq,
494 				 ret, ndlp->nlp_DID);
495 		lpfc_mbuf_free(vport->phba, bmp->virt, bmp->phys);
496 		kfree(bmp);
497 		return ret;
498 	}
499 
500 	/* Stub in routine and return 0 for now. */
501 	return ret;
502 }
503 
504 /**
505  * lpfc_nvme_ls_abort - Issue an Link Service request
506  * @lpfc_pnvme: Pointer to the driver's nvme instance data
507  * @lpfc_nvme_lport: Pointer to the driver's local port data
508  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
509  *
510  * Driver registers this routine to handle any link service request
511  * from the nvme_fc transport to a remote nvme-aware port.
512  *
513  * Return value :
514  *   0 - Success
515  *   TODO: What are the failure codes.
516  **/
517 static void
518 lpfc_nvme_ls_abort(struct nvme_fc_local_port *pnvme_lport,
519 		   struct nvme_fc_remote_port *pnvme_rport,
520 		   struct nvmefc_ls_req *pnvme_lsreq)
521 {
522 	struct lpfc_nvme_lport *lport;
523 	struct lpfc_vport *vport;
524 	struct lpfc_hba *phba;
525 	struct lpfc_nodelist *ndlp;
526 	LIST_HEAD(abort_list);
527 	struct lpfc_sli_ring *pring;
528 	struct lpfc_iocbq *wqe, *next_wqe;
529 
530 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
531 	vport = lport->vport;
532 	phba = vport->phba;
533 
534 	ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
535 	if (!ndlp) {
536 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
537 				 "6049 Could not find node for DID %x\n",
538 				 pnvme_rport->port_id);
539 		return;
540 	}
541 
542 	/* Expand print to include key fields. */
543 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
544 			 "6040 ENTER.  lport %p, rport %p lsreq %p rqstlen:%d "
545 			 "rsplen:%d %pad %pad\n",
546 			 pnvme_lport, pnvme_rport,
547 			 pnvme_lsreq, pnvme_lsreq->rqstlen,
548 			 pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma,
549 			 &pnvme_lsreq->rspdma);
550 
551 	/*
552 	 * Lock the ELS ring txcmplq and build a local list of all ELS IOs
553 	 * that need an ABTS.  The IOs need to stay on the txcmplq so that
554 	 * the abort operation completes them successfully.
555 	 */
556 	pring = phba->sli4_hba.nvmels_wq->pring;
557 	spin_lock_irq(&phba->hbalock);
558 	spin_lock(&pring->ring_lock);
559 	list_for_each_entry_safe(wqe, next_wqe, &pring->txcmplq, list) {
560 		/* Add to abort_list on on NDLP match. */
561 		if (lpfc_check_sli_ndlp(phba, pring, wqe, ndlp)) {
562 			wqe->iocb_flag |= LPFC_DRIVER_ABORTED;
563 			list_add_tail(&wqe->dlist, &abort_list);
564 		}
565 	}
566 	spin_unlock(&pring->ring_lock);
567 	spin_unlock_irq(&phba->hbalock);
568 
569 	/* Abort the targeted IOs and remove them from the abort list. */
570 	list_for_each_entry_safe(wqe, next_wqe, &abort_list, dlist) {
571 		spin_lock_irq(&phba->hbalock);
572 		list_del_init(&wqe->dlist);
573 		lpfc_sli_issue_abort_iotag(phba, pring, wqe);
574 		spin_unlock_irq(&phba->hbalock);
575 	}
576 }
577 
578 /* Fix up the existing sgls for NVME IO. */
579 static void
580 lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
581 		       struct lpfc_nvme_buf *lpfc_ncmd,
582 		       struct nvmefc_fcp_req *nCmd)
583 {
584 	struct sli4_sge *sgl;
585 	union lpfc_wqe128 *wqe;
586 	uint32_t *wptr, *dptr;
587 
588 	/*
589 	 * Adjust the FCP_CMD and FCP_RSP DMA data and sge_len to
590 	 * match NVME.  NVME sends 96 bytes. Also, use the
591 	 * nvme commands command and response dma addresses
592 	 * rather than the virtual memory to ease the restore
593 	 * operation.
594 	 */
595 	sgl = lpfc_ncmd->nvme_sgl;
596 	sgl->sge_len = cpu_to_le32(nCmd->cmdlen);
597 
598 	sgl++;
599 
600 	/* Setup the physical region for the FCP RSP */
601 	sgl->addr_hi = cpu_to_le32(putPaddrHigh(nCmd->rspdma));
602 	sgl->addr_lo = cpu_to_le32(putPaddrLow(nCmd->rspdma));
603 	sgl->word2 = le32_to_cpu(sgl->word2);
604 	if (nCmd->sg_cnt)
605 		bf_set(lpfc_sli4_sge_last, sgl, 0);
606 	else
607 		bf_set(lpfc_sli4_sge_last, sgl, 1);
608 	sgl->word2 = cpu_to_le32(sgl->word2);
609 	sgl->sge_len = cpu_to_le32(nCmd->rsplen);
610 
611 	/*
612 	 * Get a local pointer to the built-in wqe and correct
613 	 * the cmd size to match NVME's 96 bytes and fix
614 	 * the dma address.
615 	 */
616 
617 	/* 128 byte wqe support here */
618 	wqe = (union lpfc_wqe128 *)&lpfc_ncmd->cur_iocbq.wqe;
619 
620 	/* Word 0-2 - NVME CMND IU (embedded payload) */
621 	wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_IMMED;
622 	wqe->generic.bde.tus.f.bdeSize = 60;
623 	wqe->generic.bde.addrHigh = 0;
624 	wqe->generic.bde.addrLow =  64;  /* Word 16 */
625 
626 	/* Word 3 */
627 	bf_set(payload_offset_len, &wqe->fcp_icmd,
628 	       (nCmd->rsplen + nCmd->cmdlen));
629 
630 	/* Word 10 */
631 	bf_set(wqe_nvme, &wqe->fcp_icmd.wqe_com, 1);
632 	bf_set(wqe_wqes, &wqe->fcp_icmd.wqe_com, 1);
633 
634 	/*
635 	 * Embed the payload in the last half of the WQE
636 	 * WQE words 16-30 get the NVME CMD IU payload
637 	 *
638 	 * WQE words 16-19 get payload Words 1-4
639 	 * WQE words 20-21 get payload Words 6-7
640 	 * WQE words 22-29 get payload Words 16-23
641 	 */
642 	wptr = &wqe->words[16];  /* WQE ptr */
643 	dptr = (uint32_t *)nCmd->cmdaddr;  /* payload ptr */
644 	dptr++;			/* Skip Word 0 in payload */
645 
646 	*wptr++ = *dptr++;	/* Word 1 */
647 	*wptr++ = *dptr++;	/* Word 2 */
648 	*wptr++ = *dptr++;	/* Word 3 */
649 	*wptr++ = *dptr++;	/* Word 4 */
650 	dptr++;			/* Skip Word 5 in payload */
651 	*wptr++ = *dptr++;	/* Word 6 */
652 	*wptr++ = *dptr++;	/* Word 7 */
653 	dptr += 8;		/* Skip Words 8-15 in payload */
654 	*wptr++ = *dptr++;	/* Word 16 */
655 	*wptr++ = *dptr++;	/* Word 17 */
656 	*wptr++ = *dptr++;	/* Word 18 */
657 	*wptr++ = *dptr++;	/* Word 19 */
658 	*wptr++ = *dptr++;	/* Word 20 */
659 	*wptr++ = *dptr++;	/* Word 21 */
660 	*wptr++ = *dptr++;	/* Word 22 */
661 	*wptr   = *dptr;	/* Word 23 */
662 }
663 
664 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
665 static void
666 lpfc_nvme_ktime(struct lpfc_hba *phba,
667 		struct lpfc_nvme_buf *lpfc_ncmd)
668 {
669 	uint64_t seg1, seg2, seg3, seg4;
670 
671 	if (!phba->ktime_on)
672 		return;
673 	if (!lpfc_ncmd->ts_last_cmd ||
674 	    !lpfc_ncmd->ts_cmd_start ||
675 	    !lpfc_ncmd->ts_cmd_wqput ||
676 	    !lpfc_ncmd->ts_isr_cmpl ||
677 	    !lpfc_ncmd->ts_data_nvme)
678 		return;
679 	if (lpfc_ncmd->ts_cmd_start < lpfc_ncmd->ts_last_cmd)
680 		return;
681 	if (lpfc_ncmd->ts_cmd_wqput < lpfc_ncmd->ts_cmd_start)
682 		return;
683 	if (lpfc_ncmd->ts_isr_cmpl < lpfc_ncmd->ts_cmd_wqput)
684 		return;
685 	if (lpfc_ncmd->ts_data_nvme < lpfc_ncmd->ts_isr_cmpl)
686 		return;
687 	/*
688 	 * Segment 1 - Time from Last FCP command cmpl is handed
689 	 * off to NVME Layer to start of next command.
690 	 * Segment 2 - Time from Driver receives a IO cmd start
691 	 * from NVME Layer to WQ put is done on IO cmd.
692 	 * Segment 3 - Time from Driver WQ put is done on IO cmd
693 	 * to MSI-X ISR for IO cmpl.
694 	 * Segment 4 - Time from MSI-X ISR for IO cmpl to when
695 	 * cmpl is handled off to the NVME Layer.
696 	 */
697 	seg1 = lpfc_ncmd->ts_cmd_start - lpfc_ncmd->ts_last_cmd;
698 	if (seg1 > 5000000)  /* 5 ms - for sequential IOs */
699 		return;
700 
701 	/* Calculate times relative to start of IO */
702 	seg2 = (lpfc_ncmd->ts_cmd_wqput - lpfc_ncmd->ts_cmd_start);
703 	seg3 = (lpfc_ncmd->ts_isr_cmpl -
704 		lpfc_ncmd->ts_cmd_start) - seg2;
705 	seg4 = (lpfc_ncmd->ts_data_nvme -
706 		lpfc_ncmd->ts_cmd_start) - seg2 - seg3;
707 	phba->ktime_data_samples++;
708 	phba->ktime_seg1_total += seg1;
709 	if (seg1 < phba->ktime_seg1_min)
710 		phba->ktime_seg1_min = seg1;
711 	else if (seg1 > phba->ktime_seg1_max)
712 		phba->ktime_seg1_max = seg1;
713 	phba->ktime_seg2_total += seg2;
714 	if (seg2 < phba->ktime_seg2_min)
715 		phba->ktime_seg2_min = seg2;
716 	else if (seg2 > phba->ktime_seg2_max)
717 		phba->ktime_seg2_max = seg2;
718 	phba->ktime_seg3_total += seg3;
719 	if (seg3 < phba->ktime_seg3_min)
720 		phba->ktime_seg3_min = seg3;
721 	else if (seg3 > phba->ktime_seg3_max)
722 		phba->ktime_seg3_max = seg3;
723 	phba->ktime_seg4_total += seg4;
724 	if (seg4 < phba->ktime_seg4_min)
725 		phba->ktime_seg4_min = seg4;
726 	else if (seg4 > phba->ktime_seg4_max)
727 		phba->ktime_seg4_max = seg4;
728 
729 	lpfc_ncmd->ts_last_cmd = 0;
730 	lpfc_ncmd->ts_cmd_start = 0;
731 	lpfc_ncmd->ts_cmd_wqput  = 0;
732 	lpfc_ncmd->ts_isr_cmpl = 0;
733 	lpfc_ncmd->ts_data_nvme = 0;
734 }
735 #endif
736 
737 /**
738  * lpfc_nvme_io_cmd_wqe_cmpl - Complete an NVME-over-FCP IO
739  * @lpfc_pnvme: Pointer to the driver's nvme instance data
740  * @lpfc_nvme_lport: Pointer to the driver's local port data
741  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
742  *
743  * Driver registers this routine as it io request handler.  This
744  * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
745  * data structure to the rport indicated in @lpfc_nvme_rport.
746  *
747  * Return value :
748  *   0 - Success
749  *   TODO: What are the failure codes.
750  **/
751 static void
752 lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
753 			  struct lpfc_wcqe_complete *wcqe)
754 {
755 	struct lpfc_nvme_buf *lpfc_ncmd =
756 		(struct lpfc_nvme_buf *)pwqeIn->context1;
757 	struct lpfc_vport *vport = pwqeIn->vport;
758 	struct nvmefc_fcp_req *nCmd;
759 	struct nvme_fc_ersp_iu *ep;
760 	struct nvme_fc_cmd_iu *cp;
761 	struct lpfc_nvme_rport *rport;
762 	struct lpfc_nodelist *ndlp;
763 	struct lpfc_nvme_fcpreq_priv *freqpriv;
764 	unsigned long flags;
765 	uint32_t code;
766 	uint16_t cid, sqhd, data;
767 	uint32_t *ptr;
768 
769 	/* Sanity check on return of outstanding command */
770 	if (!lpfc_ncmd || !lpfc_ncmd->nvmeCmd || !lpfc_ncmd->nrport) {
771 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
772 				 "6071 Completion pointers bad on wqe %p.\n",
773 				 wcqe);
774 		return;
775 	}
776 	atomic_inc(&phba->fc4NvmeIoCmpls);
777 
778 	nCmd = lpfc_ncmd->nvmeCmd;
779 	rport = lpfc_ncmd->nrport;
780 
781 	lpfc_nvmeio_data(phba, "NVME FCP CMPL: xri x%x stat x%x parm x%x\n",
782 			 lpfc_ncmd->cur_iocbq.sli4_xritag,
783 			 bf_get(lpfc_wcqe_c_status, wcqe), wcqe->parameter);
784 	/*
785 	 * Catch race where our node has transitioned, but the
786 	 * transport is still transitioning.
787 	 */
788 	ndlp = rport->ndlp;
789 	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
790 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
791 				 "6061 rport %p,  DID x%06x node not ready.\n",
792 				 rport, rport->remoteport->port_id);
793 
794 		ndlp = lpfc_findnode_did(vport, rport->remoteport->port_id);
795 		if (!ndlp) {
796 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
797 					 "6062 Ignoring NVME cmpl.  No ndlp\n");
798 			goto out_err;
799 		}
800 	}
801 
802 	code = bf_get(lpfc_wcqe_c_code, wcqe);
803 	if (code == CQE_CODE_NVME_ERSP) {
804 		/* For this type of CQE, we need to rebuild the rsp */
805 		ep = (struct nvme_fc_ersp_iu *)nCmd->rspaddr;
806 
807 		/*
808 		 * Get Command Id from cmd to plug into response. This
809 		 * code is not needed in the next NVME Transport drop.
810 		 */
811 		cp = (struct nvme_fc_cmd_iu *)nCmd->cmdaddr;
812 		cid = cp->sqe.common.command_id;
813 
814 		/*
815 		 * RSN is in CQE word 2
816 		 * SQHD is in CQE Word 3 bits 15:0
817 		 * Cmd Specific info is in CQE Word 1
818 		 * and in CQE Word 0 bits 15:0
819 		 */
820 		sqhd = bf_get(lpfc_wcqe_c_sqhead, wcqe);
821 
822 		/* Now lets build the NVME ERSP IU */
823 		ep->iu_len = cpu_to_be16(8);
824 		ep->rsn = wcqe->parameter;
825 		ep->xfrd_len = cpu_to_be32(nCmd->payload_length);
826 		ep->rsvd12 = 0;
827 		ptr = (uint32_t *)&ep->cqe.result.u64;
828 		*ptr++ = wcqe->total_data_placed;
829 		data = bf_get(lpfc_wcqe_c_ersp0, wcqe);
830 		*ptr = (uint32_t)data;
831 		ep->cqe.sq_head = sqhd;
832 		ep->cqe.sq_id =  nCmd->sqid;
833 		ep->cqe.command_id = cid;
834 		ep->cqe.status = 0;
835 
836 		lpfc_ncmd->status = IOSTAT_SUCCESS;
837 		lpfc_ncmd->result = 0;
838 		nCmd->rcv_rsplen = LPFC_NVME_ERSP_LEN;
839 		nCmd->transferred_length = nCmd->payload_length;
840 	} else {
841 		lpfc_ncmd->status = (bf_get(lpfc_wcqe_c_status, wcqe) &
842 			    LPFC_IOCB_STATUS_MASK);
843 		lpfc_ncmd->result = wcqe->parameter;
844 
845 		/* For NVME, the only failure path that results in an
846 		 * IO error is when the adapter rejects it.  All other
847 		 * conditions are a success case and resolved by the
848 		 * transport.
849 		 * IOSTAT_FCP_RSP_ERROR means:
850 		 * 1. Length of data received doesn't match total
851 		 *    transfer length in WQE
852 		 * 2. If the RSP payload does NOT match these cases:
853 		 *    a. RSP length 12/24 bytes and all zeros
854 		 *    b. NVME ERSP
855 		 */
856 		switch (lpfc_ncmd->status) {
857 		case IOSTAT_SUCCESS:
858 			nCmd->transferred_length = wcqe->total_data_placed;
859 			nCmd->rcv_rsplen = 0;
860 			nCmd->status = 0;
861 			break;
862 		case IOSTAT_FCP_RSP_ERROR:
863 			nCmd->transferred_length = wcqe->total_data_placed;
864 			nCmd->rcv_rsplen = wcqe->parameter;
865 			nCmd->status = 0;
866 			/* Sanity check */
867 			if (nCmd->rcv_rsplen == LPFC_NVME_ERSP_LEN)
868 				break;
869 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
870 					 "6081 NVME Completion Protocol Error: "
871 					 "xri %x status x%x result x%x "
872 					 "placed x%x\n",
873 					 lpfc_ncmd->cur_iocbq.sli4_xritag,
874 					 lpfc_ncmd->status, lpfc_ncmd->result,
875 					 wcqe->total_data_placed);
876 			break;
877 		default:
878 out_err:
879 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
880 					 "6072 NVME Completion Error: xri %x "
881 					 "status x%x result x%x placed x%x\n",
882 					 lpfc_ncmd->cur_iocbq.sli4_xritag,
883 					 lpfc_ncmd->status, lpfc_ncmd->result,
884 					 wcqe->total_data_placed);
885 			nCmd->transferred_length = 0;
886 			nCmd->rcv_rsplen = 0;
887 			nCmd->status = NVME_SC_FC_TRANSPORT_ERROR;
888 		}
889 	}
890 
891 	/* pick up SLI4 exhange busy condition */
892 	if (bf_get(lpfc_wcqe_c_xb, wcqe))
893 		lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
894 	else
895 		lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
896 
897 	if (ndlp && NLP_CHK_NODE_ACT(ndlp))
898 		atomic_dec(&ndlp->cmd_pending);
899 
900 	/* Update stats and complete the IO.  There is
901 	 * no need for dma unprep because the nvme_transport
902 	 * owns the dma address.
903 	 */
904 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
905 	if (phba->ktime_on) {
906 		lpfc_ncmd->ts_isr_cmpl = pwqeIn->isr_timestamp;
907 		lpfc_ncmd->ts_data_nvme = ktime_get_ns();
908 		phba->ktime_last_cmd = lpfc_ncmd->ts_data_nvme;
909 		lpfc_nvme_ktime(phba, lpfc_ncmd);
910 	}
911 	if (phba->cpucheck_on & LPFC_CHECK_NVME_IO) {
912 		if (lpfc_ncmd->cpu != smp_processor_id())
913 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
914 					 "6701 CPU Check cmpl: "
915 					 "cpu %d expect %d\n",
916 					 smp_processor_id(), lpfc_ncmd->cpu);
917 		if (lpfc_ncmd->cpu < LPFC_CHECK_CPU_CNT)
918 			phba->cpucheck_cmpl_io[lpfc_ncmd->cpu]++;
919 	}
920 #endif
921 	freqpriv = nCmd->private;
922 	freqpriv->nvme_buf = NULL;
923 	nCmd->done(nCmd);
924 
925 	spin_lock_irqsave(&phba->hbalock, flags);
926 	lpfc_ncmd->nrport = NULL;
927 	spin_unlock_irqrestore(&phba->hbalock, flags);
928 
929 	lpfc_release_nvme_buf(phba, lpfc_ncmd);
930 }
931 
932 
933 /**
934  * lpfc_nvme_prep_io_cmd - Issue an NVME-over-FCP IO
935  * @lpfc_pnvme: Pointer to the driver's nvme instance data
936  * @lpfc_nvme_lport: Pointer to the driver's local port data
937  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
938  * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
939  * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
940  *
941  * Driver registers this routine as it io request handler.  This
942  * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
943  * data structure to the rport indicated in @lpfc_nvme_rport.
944  *
945  * Return value :
946  *   0 - Success
947  *   TODO: What are the failure codes.
948  **/
949 static int
950 lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
951 		      struct lpfc_nvme_buf *lpfc_ncmd,
952 		      struct lpfc_nodelist *pnode)
953 {
954 	struct lpfc_hba *phba = vport->phba;
955 	struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
956 	struct lpfc_iocbq *pwqeq = &(lpfc_ncmd->cur_iocbq);
957 	union lpfc_wqe128 *wqe = (union lpfc_wqe128 *)&pwqeq->wqe;
958 	uint32_t req_len;
959 
960 	if (!pnode || !NLP_CHK_NODE_ACT(pnode))
961 		return -EINVAL;
962 
963 	/*
964 	 * There are three possibilities here - use scatter-gather segment, use
965 	 * the single mapping, or neither.
966 	 */
967 	wqe->fcp_iwrite.initial_xfer_len = 0;
968 	if (nCmd->sg_cnt) {
969 		if (nCmd->io_dir == NVMEFC_FCP_WRITE) {
970 			/* Word 5 */
971 			if ((phba->cfg_nvme_enable_fb) &&
972 			    (pnode->nlp_flag & NLP_FIRSTBURST)) {
973 				req_len = lpfc_ncmd->nvmeCmd->payload_length;
974 				if (req_len < pnode->nvme_fb_size)
975 					wqe->fcp_iwrite.initial_xfer_len =
976 						req_len;
977 				else
978 					wqe->fcp_iwrite.initial_xfer_len =
979 						pnode->nvme_fb_size;
980 			}
981 
982 			/* Word 7 */
983 			bf_set(wqe_cmnd, &wqe->generic.wqe_com,
984 			       CMD_FCP_IWRITE64_WQE);
985 			bf_set(wqe_pu, &wqe->generic.wqe_com,
986 			       PARM_READ_CHECK);
987 
988 			/* Word 10 */
989 			bf_set(wqe_qosd, &wqe->fcp_iwrite.wqe_com, 0);
990 			bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com,
991 			       LPFC_WQE_IOD_WRITE);
992 			bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com,
993 			       LPFC_WQE_LENLOC_WORD4);
994 			if (phba->cfg_nvme_oas)
995 				bf_set(wqe_oas, &wqe->fcp_iwrite.wqe_com, 1);
996 
997 			/* Word 11 */
998 			bf_set(wqe_cmd_type, &wqe->generic.wqe_com,
999 			       NVME_WRITE_CMD);
1000 
1001 			atomic_inc(&phba->fc4NvmeOutputRequests);
1002 		} else {
1003 			/* Word 7 */
1004 			bf_set(wqe_cmnd, &wqe->generic.wqe_com,
1005 			       CMD_FCP_IREAD64_WQE);
1006 			bf_set(wqe_pu, &wqe->generic.wqe_com,
1007 			       PARM_READ_CHECK);
1008 
1009 			/* Word 10 */
1010 			bf_set(wqe_qosd, &wqe->fcp_iread.wqe_com, 0);
1011 			bf_set(wqe_iod, &wqe->fcp_iread.wqe_com,
1012 			       LPFC_WQE_IOD_READ);
1013 			bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com,
1014 			       LPFC_WQE_LENLOC_WORD4);
1015 			if (phba->cfg_nvme_oas)
1016 				bf_set(wqe_oas, &wqe->fcp_iread.wqe_com, 1);
1017 
1018 			/* Word 11 */
1019 			bf_set(wqe_cmd_type, &wqe->generic.wqe_com,
1020 			       NVME_READ_CMD);
1021 
1022 			atomic_inc(&phba->fc4NvmeInputRequests);
1023 		}
1024 	} else {
1025 		/* Word 4 */
1026 		wqe->fcp_icmd.rsrvd4 = 0;
1027 
1028 		/* Word 7 */
1029 		bf_set(wqe_cmnd, &wqe->generic.wqe_com, CMD_FCP_ICMND64_WQE);
1030 		bf_set(wqe_pu, &wqe->generic.wqe_com, 0);
1031 
1032 		/* Word 10 */
1033 		bf_set(wqe_qosd, &wqe->fcp_icmd.wqe_com, 1);
1034 		bf_set(wqe_iod, &wqe->fcp_icmd.wqe_com, LPFC_WQE_IOD_WRITE);
1035 		bf_set(wqe_lenloc, &wqe->fcp_icmd.wqe_com,
1036 		       LPFC_WQE_LENLOC_NONE);
1037 		if (phba->cfg_nvme_oas)
1038 			bf_set(wqe_oas, &wqe->fcp_icmd.wqe_com, 1);
1039 
1040 		/* Word 11 */
1041 		bf_set(wqe_cmd_type, &wqe->generic.wqe_com, NVME_READ_CMD);
1042 
1043 		atomic_inc(&phba->fc4NvmeControlRequests);
1044 	}
1045 	/*
1046 	 * Finish initializing those WQE fields that are independent
1047 	 * of the nvme_cmnd request_buffer
1048 	 */
1049 
1050 	/* Word 6 */
1051 	bf_set(wqe_ctxt_tag, &wqe->generic.wqe_com,
1052 	       phba->sli4_hba.rpi_ids[pnode->nlp_rpi]);
1053 	bf_set(wqe_xri_tag, &wqe->generic.wqe_com, pwqeq->sli4_xritag);
1054 
1055 	/* Word 7 */
1056 	/* Preserve Class data in the ndlp. */
1057 	bf_set(wqe_class, &wqe->generic.wqe_com,
1058 	       (pnode->nlp_fcp_info & 0x0f));
1059 
1060 	/* Word 8 */
1061 	wqe->generic.wqe_com.abort_tag = pwqeq->iotag;
1062 
1063 	/* Word 9 */
1064 	bf_set(wqe_reqtag, &wqe->generic.wqe_com, pwqeq->iotag);
1065 
1066 	/* Word 11 */
1067 	bf_set(wqe_cqid, &wqe->generic.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
1068 
1069 	pwqeq->vport = vport;
1070 	return 0;
1071 }
1072 
1073 
1074 /**
1075  * lpfc_nvme_prep_io_dma - Issue an NVME-over-FCP IO
1076  * @lpfc_pnvme: Pointer to the driver's nvme instance data
1077  * @lpfc_nvme_lport: Pointer to the driver's local port data
1078  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
1079  * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
1080  * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
1081  *
1082  * Driver registers this routine as it io request handler.  This
1083  * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
1084  * data structure to the rport indicated in @lpfc_nvme_rport.
1085  *
1086  * Return value :
1087  *   0 - Success
1088  *   TODO: What are the failure codes.
1089  **/
1090 static int
1091 lpfc_nvme_prep_io_dma(struct lpfc_vport *vport,
1092 		      struct lpfc_nvme_buf *lpfc_ncmd)
1093 {
1094 	struct lpfc_hba *phba = vport->phba;
1095 	struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
1096 	union lpfc_wqe128 *wqe = (union lpfc_wqe128 *)&lpfc_ncmd->cur_iocbq.wqe;
1097 	struct sli4_sge *sgl = lpfc_ncmd->nvme_sgl;
1098 	struct scatterlist *data_sg;
1099 	struct sli4_sge *first_data_sgl;
1100 	dma_addr_t physaddr;
1101 	uint32_t num_bde = 0;
1102 	uint32_t dma_len;
1103 	uint32_t dma_offset = 0;
1104 	int nseg, i;
1105 
1106 	/* Fix up the command and response DMA stuff. */
1107 	lpfc_nvme_adj_fcp_sgls(vport, lpfc_ncmd, nCmd);
1108 
1109 	/*
1110 	 * There are three possibilities here - use scatter-gather segment, use
1111 	 * the single mapping, or neither.
1112 	 */
1113 	if (nCmd->sg_cnt) {
1114 		/*
1115 		 * Jump over the cmd and rsp SGEs.  The fix routine
1116 		 * has already adjusted for this.
1117 		 */
1118 		sgl += 2;
1119 
1120 		first_data_sgl = sgl;
1121 		lpfc_ncmd->seg_cnt = nCmd->sg_cnt;
1122 		if (lpfc_ncmd->seg_cnt > phba->cfg_nvme_seg_cnt) {
1123 			lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
1124 					"6058 Too many sg segments from "
1125 					"NVME Transport.  Max %d, "
1126 					"nvmeIO sg_cnt %d\n",
1127 					phba->cfg_nvme_seg_cnt,
1128 					lpfc_ncmd->seg_cnt);
1129 			lpfc_ncmd->seg_cnt = 0;
1130 			return 1;
1131 		}
1132 
1133 		/*
1134 		 * The driver established a maximum scatter-gather segment count
1135 		 * during probe that limits the number of sg elements in any
1136 		 * single nvme command.  Just run through the seg_cnt and format
1137 		 * the sge's.
1138 		 */
1139 		nseg = nCmd->sg_cnt;
1140 		data_sg = nCmd->first_sgl;
1141 		for (i = 0; i < nseg; i++) {
1142 			if (data_sg == NULL) {
1143 				lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
1144 						"6059 dptr err %d, nseg %d\n",
1145 						i, nseg);
1146 				lpfc_ncmd->seg_cnt = 0;
1147 				return 1;
1148 			}
1149 			physaddr = data_sg->dma_address;
1150 			dma_len = data_sg->length;
1151 			sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
1152 			sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
1153 			sgl->word2 = le32_to_cpu(sgl->word2);
1154 			if ((num_bde + 1) == nseg)
1155 				bf_set(lpfc_sli4_sge_last, sgl, 1);
1156 			else
1157 				bf_set(lpfc_sli4_sge_last, sgl, 0);
1158 			bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
1159 			bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
1160 			sgl->word2 = cpu_to_le32(sgl->word2);
1161 			sgl->sge_len = cpu_to_le32(dma_len);
1162 
1163 			dma_offset += dma_len;
1164 			data_sg = sg_next(data_sg);
1165 			sgl++;
1166 		}
1167 	} else {
1168 		/* For this clause to be valid, the payload_length
1169 		 * and sg_cnt must zero.
1170 		 */
1171 		if (nCmd->payload_length != 0) {
1172 			lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
1173 					"6063 NVME DMA Prep Err: sg_cnt %d "
1174 					"payload_length x%x\n",
1175 					nCmd->sg_cnt, nCmd->payload_length);
1176 			return 1;
1177 		}
1178 	}
1179 
1180 	/*
1181 	 * Due to difference in data length between DIF/non-DIF paths,
1182 	 * we need to set word 4 of WQE here
1183 	 */
1184 	wqe->fcp_iread.total_xfer_len = nCmd->payload_length;
1185 	return 0;
1186 }
1187 
1188 /**
1189  * lpfc_nvme_fcp_io_submit - Issue an NVME-over-FCP IO
1190  * @lpfc_pnvme: Pointer to the driver's nvme instance data
1191  * @lpfc_nvme_lport: Pointer to the driver's local port data
1192  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
1193  * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
1194  * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
1195  *
1196  * Driver registers this routine as it io request handler.  This
1197  * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
1198  * data structure to the rport
1199  indicated in @lpfc_nvme_rport.
1200  *
1201  * Return value :
1202  *   0 - Success
1203  *   TODO: What are the failure codes.
1204  **/
1205 static int
1206 lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport,
1207 			struct nvme_fc_remote_port *pnvme_rport,
1208 			void *hw_queue_handle,
1209 			struct nvmefc_fcp_req *pnvme_fcreq)
1210 {
1211 	int ret = 0;
1212 	struct lpfc_nvme_lport *lport;
1213 	struct lpfc_vport *vport;
1214 	struct lpfc_hba *phba;
1215 	struct lpfc_nodelist *ndlp;
1216 	struct lpfc_nvme_buf *lpfc_ncmd;
1217 	struct lpfc_nvme_rport *rport;
1218 	struct lpfc_nvme_qhandle *lpfc_queue_info;
1219 	struct lpfc_nvme_fcpreq_priv *freqpriv = pnvme_fcreq->private;
1220 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1221 	uint64_t start = 0;
1222 #endif
1223 
1224 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
1225 	vport = lport->vport;
1226 	phba = vport->phba;
1227 
1228 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1229 	if (phba->ktime_on)
1230 		start = ktime_get_ns();
1231 #endif
1232 	rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
1233 	lpfc_queue_info = (struct lpfc_nvme_qhandle *)hw_queue_handle;
1234 
1235 	/*
1236 	 * Catch race where our node has transitioned, but the
1237 	 * transport is still transitioning.
1238 	 */
1239 	ndlp = rport->ndlp;
1240 	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
1241 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
1242 				 "6053 rport %p, ndlp %p, DID x%06x "
1243 				 "ndlp not ready.\n",
1244 				 rport, ndlp, pnvme_rport->port_id);
1245 
1246 		ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
1247 		if (!ndlp) {
1248 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
1249 					 "6066 Missing node for DID %x\n",
1250 					 pnvme_rport->port_id);
1251 			ret = -ENODEV;
1252 			goto out_fail;
1253 		}
1254 	}
1255 
1256 	/* The remote node has to be a mapped target or it's an error. */
1257 	if ((ndlp->nlp_type & NLP_NVME_TARGET) &&
1258 	    (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
1259 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
1260 				 "6036 rport %p, DID x%06x not ready for "
1261 				 "IO. State x%x, Type x%x\n",
1262 				 rport, pnvme_rport->port_id,
1263 				 ndlp->nlp_state, ndlp->nlp_type);
1264 		ret = -ENODEV;
1265 		goto out_fail;
1266 
1267 	}
1268 
1269 	/* The node is shared with FCP IO, make sure the IO pending count does
1270 	 * not exceed the programmed depth.
1271 	 */
1272 	if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) {
1273 		ret = -EAGAIN;
1274 		goto out_fail;
1275 	}
1276 
1277 	lpfc_ncmd = lpfc_get_nvme_buf(phba, ndlp);
1278 	if (lpfc_ncmd == NULL) {
1279 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
1280 				 "6065 driver's buffer pool is empty, "
1281 				 "IO failed\n");
1282 		ret = -ENOMEM;
1283 		goto out_fail;
1284 	}
1285 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1286 	if (phba->ktime_on) {
1287 		lpfc_ncmd->ts_cmd_start = start;
1288 		lpfc_ncmd->ts_last_cmd = phba->ktime_last_cmd;
1289 	}
1290 #endif
1291 
1292 	/*
1293 	 * Store the data needed by the driver to issue, abort, and complete
1294 	 * an IO.
1295 	 * Do not let the IO hang out forever.  There is no midlayer issuing
1296 	 * an abort so inform the FW of the maximum IO pending time.
1297 	 */
1298 	freqpriv->nvme_buf = lpfc_ncmd;
1299 	lpfc_ncmd->nvmeCmd = pnvme_fcreq;
1300 	lpfc_ncmd->nrport = rport;
1301 	lpfc_ncmd->ndlp = ndlp;
1302 	lpfc_ncmd->start_time = jiffies;
1303 
1304 	lpfc_nvme_prep_io_cmd(vport, lpfc_ncmd, ndlp);
1305 	ret = lpfc_nvme_prep_io_dma(vport, lpfc_ncmd);
1306 	if (ret) {
1307 		ret = -ENOMEM;
1308 		goto out_free_nvme_buf;
1309 	}
1310 
1311 	atomic_inc(&ndlp->cmd_pending);
1312 
1313 	/*
1314 	 * Issue the IO on the WQ indicated by index in the hw_queue_handle.
1315 	 * This identfier was create in our hardware queue create callback
1316 	 * routine. The driver now is dependent on the IO queue steering from
1317 	 * the transport.  We are trusting the upper NVME layers know which
1318 	 * index to use and that they have affinitized a CPU to this hardware
1319 	 * queue. A hardware queue maps to a driver MSI-X vector/EQ/CQ/WQ.
1320 	 */
1321 	lpfc_ncmd->cur_iocbq.hba_wqidx = lpfc_queue_info->index;
1322 
1323 	lpfc_nvmeio_data(phba, "NVME FCP XMIT: xri x%x idx %d to %06x\n",
1324 			 lpfc_ncmd->cur_iocbq.sli4_xritag,
1325 			 lpfc_queue_info->index, ndlp->nlp_DID);
1326 
1327 	ret = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, &lpfc_ncmd->cur_iocbq);
1328 	if (ret) {
1329 		atomic_dec(&ndlp->cmd_pending);
1330 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
1331 				 "6113 FCP could not issue WQE err %x "
1332 				 "sid: x%x did: x%x oxid: x%x\n",
1333 				 ret, vport->fc_myDID, ndlp->nlp_DID,
1334 				 lpfc_ncmd->cur_iocbq.sli4_xritag);
1335 		ret = -EBUSY;
1336 		goto out_free_nvme_buf;
1337 	}
1338 
1339 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1340 	if (phba->ktime_on)
1341 		lpfc_ncmd->ts_cmd_wqput = ktime_get_ns();
1342 
1343 	if (phba->cpucheck_on & LPFC_CHECK_NVME_IO) {
1344 		lpfc_ncmd->cpu = smp_processor_id();
1345 		if (lpfc_ncmd->cpu != lpfc_queue_info->index) {
1346 			/* Check for admin queue */
1347 			if (lpfc_queue_info->qidx) {
1348 				lpfc_printf_vlog(vport,
1349 						 KERN_ERR, LOG_NVME_IOERR,
1350 						"6702 CPU Check cmd: "
1351 						"cpu %d wq %d\n",
1352 						lpfc_ncmd->cpu,
1353 						lpfc_queue_info->index);
1354 			}
1355 			lpfc_ncmd->cpu = lpfc_queue_info->index;
1356 		}
1357 		if (lpfc_ncmd->cpu < LPFC_CHECK_CPU_CNT)
1358 			phba->cpucheck_xmt_io[lpfc_ncmd->cpu]++;
1359 	}
1360 #endif
1361 	return 0;
1362 
1363  out_free_nvme_buf:
1364 	if (lpfc_ncmd->nvmeCmd->sg_cnt) {
1365 		if (lpfc_ncmd->nvmeCmd->io_dir == NVMEFC_FCP_WRITE)
1366 			atomic_dec(&phba->fc4NvmeOutputRequests);
1367 		else
1368 			atomic_dec(&phba->fc4NvmeInputRequests);
1369 	} else
1370 		atomic_dec(&phba->fc4NvmeControlRequests);
1371 	lpfc_release_nvme_buf(phba, lpfc_ncmd);
1372  out_fail:
1373 	return ret;
1374 }
1375 
1376 /**
1377  * lpfc_nvme_abort_fcreq_cmpl - Complete an NVME FCP abort request.
1378  * @phba: Pointer to HBA context object
1379  * @cmdiocb: Pointer to command iocb object.
1380  * @rspiocb: Pointer to response iocb object.
1381  *
1382  * This is the callback function for any NVME FCP IO that was aborted.
1383  *
1384  * Return value:
1385  *   None
1386  **/
1387 void
1388 lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
1389 			   struct lpfc_wcqe_complete *abts_cmpl)
1390 {
1391 	lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
1392 			"6145 ABORT_XRI_CN completing on rpi x%x "
1393 			"original iotag x%x, abort cmd iotag x%x "
1394 			"req_tag x%x, status x%x, hwstatus x%x\n",
1395 			cmdiocb->iocb.un.acxri.abortContextTag,
1396 			cmdiocb->iocb.un.acxri.abortIoTag,
1397 			cmdiocb->iotag,
1398 			bf_get(lpfc_wcqe_c_request_tag, abts_cmpl),
1399 			bf_get(lpfc_wcqe_c_status, abts_cmpl),
1400 			bf_get(lpfc_wcqe_c_hw_status, abts_cmpl));
1401 	lpfc_sli_release_iocbq(phba, cmdiocb);
1402 }
1403 
1404 /**
1405  * lpfc_nvme_fcp_abort - Issue an NVME-over-FCP ABTS
1406  * @lpfc_pnvme: Pointer to the driver's nvme instance data
1407  * @lpfc_nvme_lport: Pointer to the driver's local port data
1408  * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
1409  * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
1410  * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
1411  *
1412  * Driver registers this routine as its nvme request io abort handler.  This
1413  * routine issues an fcp Abort WQE with data from the @lpfc_nvme_fcpreq
1414  * data structure to the rport indicated in @lpfc_nvme_rport.  This routine
1415  * is executed asynchronously - one the target is validated as "MAPPED" and
1416  * ready for IO, the driver issues the abort request and returns.
1417  *
1418  * Return value:
1419  *   None
1420  **/
1421 static void
1422 lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport,
1423 		    struct nvme_fc_remote_port *pnvme_rport,
1424 		    void *hw_queue_handle,
1425 		    struct nvmefc_fcp_req *pnvme_fcreq)
1426 {
1427 	struct lpfc_nvme_lport *lport;
1428 	struct lpfc_vport *vport;
1429 	struct lpfc_hba *phba;
1430 	struct lpfc_nvme_rport *rport;
1431 	struct lpfc_nvme_buf *lpfc_nbuf;
1432 	struct lpfc_iocbq *abts_buf;
1433 	struct lpfc_iocbq *nvmereq_wqe;
1434 	struct lpfc_nvme_fcpreq_priv *freqpriv = pnvme_fcreq->private;
1435 	union lpfc_wqe *abts_wqe;
1436 	unsigned long flags;
1437 	int ret_val;
1438 
1439 	lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
1440 	rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
1441 	vport = lport->vport;
1442 	phba = vport->phba;
1443 
1444 	/* Announce entry to new IO submit field. */
1445 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
1446 			 "6002 Abort Request to rport DID x%06x "
1447 			 "for nvme_fc_req %p\n",
1448 			 pnvme_rport->port_id,
1449 			 pnvme_fcreq);
1450 
1451 	/* If the hba is getting reset, this flag is set.  It is
1452 	 * cleared when the reset is complete and rings reestablished.
1453 	 */
1454 	spin_lock_irqsave(&phba->hbalock, flags);
1455 	/* driver queued commands are in process of being flushed */
1456 	if (phba->hba_flag & HBA_NVME_IOQ_FLUSH) {
1457 		spin_unlock_irqrestore(&phba->hbalock, flags);
1458 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1459 				 "6139 Driver in reset cleanup - flushing "
1460 				 "NVME Req now.  hba_flag x%x\n",
1461 				 phba->hba_flag);
1462 		return;
1463 	}
1464 
1465 	lpfc_nbuf = freqpriv->nvme_buf;
1466 	if (!lpfc_nbuf) {
1467 		spin_unlock_irqrestore(&phba->hbalock, flags);
1468 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1469 				 "6140 NVME IO req has no matching lpfc nvme "
1470 				 "io buffer.  Skipping abort req.\n");
1471 		return;
1472 	} else if (!lpfc_nbuf->nvmeCmd) {
1473 		spin_unlock_irqrestore(&phba->hbalock, flags);
1474 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1475 				 "6141 lpfc NVME IO req has no nvme_fcreq "
1476 				 "io buffer.  Skipping abort req.\n");
1477 		return;
1478 	}
1479 	nvmereq_wqe = &lpfc_nbuf->cur_iocbq;
1480 
1481 	/*
1482 	 * The lpfc_nbuf and the mapped nvme_fcreq in the driver's
1483 	 * state must match the nvme_fcreq passed by the nvme
1484 	 * transport.  If they don't match, it is likely the driver
1485 	 * has already completed the NVME IO and the nvme transport
1486 	 * has not seen it yet.
1487 	 */
1488 	if (lpfc_nbuf->nvmeCmd != pnvme_fcreq) {
1489 		spin_unlock_irqrestore(&phba->hbalock, flags);
1490 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1491 				 "6143 NVME req mismatch: "
1492 				 "lpfc_nbuf %p nvmeCmd %p, "
1493 				 "pnvme_fcreq %p.  Skipping Abort xri x%x\n",
1494 				 lpfc_nbuf, lpfc_nbuf->nvmeCmd,
1495 				 pnvme_fcreq, nvmereq_wqe->sli4_xritag);
1496 		return;
1497 	}
1498 
1499 	/* Don't abort IOs no longer on the pending queue. */
1500 	if (!(nvmereq_wqe->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
1501 		spin_unlock_irqrestore(&phba->hbalock, flags);
1502 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1503 				 "6142 NVME IO req %p not queued - skipping "
1504 				 "abort req xri x%x\n",
1505 				 pnvme_fcreq, nvmereq_wqe->sli4_xritag);
1506 		return;
1507 	}
1508 
1509 	lpfc_nvmeio_data(phba, "NVME FCP ABORT: xri x%x idx %d to %06x\n",
1510 			 nvmereq_wqe->sli4_xritag,
1511 			 nvmereq_wqe->hba_wqidx, pnvme_rport->port_id);
1512 
1513 	/* Outstanding abort is in progress */
1514 	if (nvmereq_wqe->iocb_flag & LPFC_DRIVER_ABORTED) {
1515 		spin_unlock_irqrestore(&phba->hbalock, flags);
1516 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1517 				 "6144 Outstanding NVME I/O Abort Request "
1518 				 "still pending on nvme_fcreq %p, "
1519 				 "lpfc_ncmd %p xri x%x\n",
1520 				 pnvme_fcreq, lpfc_nbuf,
1521 				 nvmereq_wqe->sli4_xritag);
1522 		return;
1523 	}
1524 
1525 	abts_buf = __lpfc_sli_get_iocbq(phba);
1526 	if (!abts_buf) {
1527 		spin_unlock_irqrestore(&phba->hbalock, flags);
1528 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1529 				 "6136 No available abort wqes. Skipping "
1530 				 "Abts req for nvme_fcreq %p xri x%x\n",
1531 				 pnvme_fcreq, nvmereq_wqe->sli4_xritag);
1532 		return;
1533 	}
1534 
1535 	/* Ready - mark outstanding as aborted by driver. */
1536 	nvmereq_wqe->iocb_flag |= LPFC_DRIVER_ABORTED;
1537 
1538 	/* Complete prepping the abort wqe and issue to the FW. */
1539 	abts_wqe = &abts_buf->wqe;
1540 
1541 	/* WQEs are reused.  Clear stale data and set key fields to
1542 	 * zero like ia, iaab, iaar, xri_tag, and ctxt_tag.
1543 	 */
1544 	memset(abts_wqe, 0, sizeof(union lpfc_wqe));
1545 	bf_set(abort_cmd_criteria, &abts_wqe->abort_cmd, T_XRI_TAG);
1546 
1547 	/* word 7 */
1548 	bf_set(wqe_ct, &abts_wqe->abort_cmd.wqe_com, 0);
1549 	bf_set(wqe_cmnd, &abts_wqe->abort_cmd.wqe_com, CMD_ABORT_XRI_CX);
1550 	bf_set(wqe_class, &abts_wqe->abort_cmd.wqe_com,
1551 	       nvmereq_wqe->iocb.ulpClass);
1552 
1553 	/* word 8 - tell the FW to abort the IO associated with this
1554 	 * outstanding exchange ID.
1555 	 */
1556 	abts_wqe->abort_cmd.wqe_com.abort_tag = nvmereq_wqe->sli4_xritag;
1557 
1558 	/* word 9 - this is the iotag for the abts_wqe completion. */
1559 	bf_set(wqe_reqtag, &abts_wqe->abort_cmd.wqe_com,
1560 	       abts_buf->iotag);
1561 
1562 	/* word 10 */
1563 	bf_set(wqe_wqid, &abts_wqe->abort_cmd.wqe_com, nvmereq_wqe->hba_wqidx);
1564 	bf_set(wqe_qosd, &abts_wqe->abort_cmd.wqe_com, 1);
1565 	bf_set(wqe_lenloc, &abts_wqe->abort_cmd.wqe_com, LPFC_WQE_LENLOC_NONE);
1566 
1567 	/* word 11 */
1568 	bf_set(wqe_cmd_type, &abts_wqe->abort_cmd.wqe_com, OTHER_COMMAND);
1569 	bf_set(wqe_wqec, &abts_wqe->abort_cmd.wqe_com, 1);
1570 	bf_set(wqe_cqid, &abts_wqe->abort_cmd.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
1571 
1572 	/* ABTS WQE must go to the same WQ as the WQE to be aborted */
1573 	abts_buf->iocb_flag |= LPFC_IO_NVME;
1574 	abts_buf->hba_wqidx = nvmereq_wqe->hba_wqidx;
1575 	abts_buf->vport = vport;
1576 	abts_buf->wqe_cmpl = lpfc_nvme_abort_fcreq_cmpl;
1577 	ret_val = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abts_buf);
1578 	spin_unlock_irqrestore(&phba->hbalock, flags);
1579 	if (ret_val == IOCB_ERROR) {
1580 		lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
1581 				 "6137 Failed abts issue_wqe with status x%x "
1582 				 "for nvme_fcreq %p.\n",
1583 				 ret_val, pnvme_fcreq);
1584 		lpfc_sli_release_iocbq(phba, abts_buf);
1585 		return;
1586 	}
1587 
1588 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
1589 			 "6138 Transport Abort NVME Request Issued for "
1590 			 "ox_id x%x on reqtag x%x\n",
1591 			 nvmereq_wqe->sli4_xritag,
1592 			 abts_buf->iotag);
1593 }
1594 
1595 /* Declare and initialization an instance of the FC NVME template. */
1596 static struct nvme_fc_port_template lpfc_nvme_template = {
1597 	/* initiator-based functions */
1598 	.localport_delete  = lpfc_nvme_localport_delete,
1599 	.remoteport_delete = lpfc_nvme_remoteport_delete,
1600 	.create_queue = lpfc_nvme_create_queue,
1601 	.delete_queue = lpfc_nvme_delete_queue,
1602 	.ls_req       = lpfc_nvme_ls_req,
1603 	.fcp_io       = lpfc_nvme_fcp_io_submit,
1604 	.ls_abort     = lpfc_nvme_ls_abort,
1605 	.fcp_abort    = lpfc_nvme_fcp_abort,
1606 
1607 	.max_hw_queues = 1,
1608 	.max_sgl_segments = LPFC_NVME_DEFAULT_SEGS,
1609 	.max_dif_sgl_segments = LPFC_NVME_DEFAULT_SEGS,
1610 	.dma_boundary = 0xFFFFFFFF,
1611 
1612 	/* Sizes of additional private data for data structures.
1613 	 * No use for the last two sizes at this time.
1614 	 */
1615 	.local_priv_sz = sizeof(struct lpfc_nvme_lport),
1616 	.remote_priv_sz = sizeof(struct lpfc_nvme_rport),
1617 	.lsrqst_priv_sz = 0,
1618 	.fcprqst_priv_sz = sizeof(struct lpfc_nvme_fcpreq_priv),
1619 };
1620 
1621 /**
1622  * lpfc_sli4_post_nvme_sgl_block - post a block of nvme sgl list to firmware
1623  * @phba: pointer to lpfc hba data structure.
1624  * @nblist: pointer to nvme buffer list.
1625  * @count: number of scsi buffers on the list.
1626  *
1627  * This routine is invoked to post a block of @count scsi sgl pages from a
1628  * SCSI buffer list @nblist to the HBA using non-embedded mailbox command.
1629  * No Lock is held.
1630  *
1631  **/
1632 static int
1633 lpfc_sli4_post_nvme_sgl_block(struct lpfc_hba *phba,
1634 			      struct list_head *nblist,
1635 			      int count)
1636 {
1637 	struct lpfc_nvme_buf *lpfc_ncmd;
1638 	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
1639 	struct sgl_page_pairs *sgl_pg_pairs;
1640 	void *viraddr;
1641 	LPFC_MBOXQ_t *mbox;
1642 	uint32_t reqlen, alloclen, pg_pairs;
1643 	uint32_t mbox_tmo;
1644 	uint16_t xritag_start = 0;
1645 	int rc = 0;
1646 	uint32_t shdr_status, shdr_add_status;
1647 	dma_addr_t pdma_phys_bpl1;
1648 	union lpfc_sli4_cfg_shdr *shdr;
1649 
1650 	/* Calculate the requested length of the dma memory */
1651 	reqlen = count * sizeof(struct sgl_page_pairs) +
1652 		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
1653 	if (reqlen > SLI4_PAGE_SIZE) {
1654 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
1655 				"6118 Block sgl registration required DMA "
1656 				"size (%d) great than a page\n", reqlen);
1657 		return -ENOMEM;
1658 	}
1659 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
1660 	if (!mbox) {
1661 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1662 				"6119 Failed to allocate mbox cmd memory\n");
1663 		return -ENOMEM;
1664 	}
1665 
1666 	/* Allocate DMA memory and set up the non-embedded mailbox command */
1667 	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
1668 				LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
1669 				LPFC_SLI4_MBX_NEMBED);
1670 
1671 	if (alloclen < reqlen) {
1672 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1673 				"6120 Allocated DMA memory size (%d) is "
1674 				"less than the requested DMA memory "
1675 				"size (%d)\n", alloclen, reqlen);
1676 		lpfc_sli4_mbox_cmd_free(phba, mbox);
1677 		return -ENOMEM;
1678 	}
1679 
1680 	/* Get the first SGE entry from the non-embedded DMA memory */
1681 	viraddr = mbox->sge_array->addr[0];
1682 
1683 	/* Set up the SGL pages in the non-embedded DMA pages */
1684 	sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
1685 	sgl_pg_pairs = &sgl->sgl_pg_pairs;
1686 
1687 	pg_pairs = 0;
1688 	list_for_each_entry(lpfc_ncmd, nblist, list) {
1689 		/* Set up the sge entry */
1690 		sgl_pg_pairs->sgl_pg0_addr_lo =
1691 			cpu_to_le32(putPaddrLow(lpfc_ncmd->dma_phys_sgl));
1692 		sgl_pg_pairs->sgl_pg0_addr_hi =
1693 			cpu_to_le32(putPaddrHigh(lpfc_ncmd->dma_phys_sgl));
1694 		if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
1695 			pdma_phys_bpl1 = lpfc_ncmd->dma_phys_sgl +
1696 						SGL_PAGE_SIZE;
1697 		else
1698 			pdma_phys_bpl1 = 0;
1699 		sgl_pg_pairs->sgl_pg1_addr_lo =
1700 			cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
1701 		sgl_pg_pairs->sgl_pg1_addr_hi =
1702 			cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
1703 		/* Keep the first xritag on the list */
1704 		if (pg_pairs == 0)
1705 			xritag_start = lpfc_ncmd->cur_iocbq.sli4_xritag;
1706 		sgl_pg_pairs++;
1707 		pg_pairs++;
1708 	}
1709 	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
1710 	bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
1711 	/* Perform endian conversion if necessary */
1712 	sgl->word0 = cpu_to_le32(sgl->word0);
1713 
1714 	if (!phba->sli4_hba.intr_enable)
1715 		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
1716 	else {
1717 		mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
1718 		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
1719 	}
1720 	shdr = (union lpfc_sli4_cfg_shdr *)&sgl->cfg_shdr;
1721 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
1722 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
1723 	if (rc != MBX_TIMEOUT)
1724 		lpfc_sli4_mbox_cmd_free(phba, mbox);
1725 	if (shdr_status || shdr_add_status || rc) {
1726 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
1727 				"6125 POST_SGL_BLOCK mailbox command failed "
1728 				"status x%x add_status x%x mbx status x%x\n",
1729 				shdr_status, shdr_add_status, rc);
1730 		rc = -ENXIO;
1731 	}
1732 	return rc;
1733 }
1734 
1735 /**
1736  * lpfc_post_nvme_sgl_list - Post blocks of nvme buffer sgls from a list
1737  * @phba: pointer to lpfc hba data structure.
1738  * @post_nblist: pointer to the nvme buffer list.
1739  *
1740  * This routine walks a list of nvme buffers that was passed in. It attempts
1741  * to construct blocks of nvme buffer sgls which contains contiguous xris and
1742  * uses the non-embedded SGL block post mailbox commands to post to the port.
1743  * For single NVME buffer sgl with non-contiguous xri, if any, it shall use
1744  * embedded SGL post mailbox command for posting. The @post_nblist passed in
1745  * must be local list, thus no lock is needed when manipulate the list.
1746  *
1747  * Returns: 0 = failure, non-zero number of successfully posted buffers.
1748  **/
1749 static int
1750 lpfc_post_nvme_sgl_list(struct lpfc_hba *phba,
1751 			     struct list_head *post_nblist, int sb_count)
1752 {
1753 	struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
1754 	int status, sgl_size;
1755 	int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
1756 	dma_addr_t pdma_phys_sgl1;
1757 	int last_xritag = NO_XRI;
1758 	int cur_xritag;
1759 	LIST_HEAD(prep_nblist);
1760 	LIST_HEAD(blck_nblist);
1761 	LIST_HEAD(nvme_nblist);
1762 
1763 	/* sanity check */
1764 	if (sb_count <= 0)
1765 		return -EINVAL;
1766 
1767 	sgl_size = phba->cfg_sg_dma_buf_size;
1768 
1769 	list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, post_nblist, list) {
1770 		list_del_init(&lpfc_ncmd->list);
1771 		block_cnt++;
1772 		if ((last_xritag != NO_XRI) &&
1773 		    (lpfc_ncmd->cur_iocbq.sli4_xritag != last_xritag + 1)) {
1774 			/* a hole in xri block, form a sgl posting block */
1775 			list_splice_init(&prep_nblist, &blck_nblist);
1776 			post_cnt = block_cnt - 1;
1777 			/* prepare list for next posting block */
1778 			list_add_tail(&lpfc_ncmd->list, &prep_nblist);
1779 			block_cnt = 1;
1780 		} else {
1781 			/* prepare list for next posting block */
1782 			list_add_tail(&lpfc_ncmd->list, &prep_nblist);
1783 			/* enough sgls for non-embed sgl mbox command */
1784 			if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
1785 				list_splice_init(&prep_nblist, &blck_nblist);
1786 				post_cnt = block_cnt;
1787 				block_cnt = 0;
1788 			}
1789 		}
1790 		num_posting++;
1791 		last_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
1792 
1793 		/* end of repost sgl list condition for NVME buffers */
1794 		if (num_posting == sb_count) {
1795 			if (post_cnt == 0) {
1796 				/* last sgl posting block */
1797 				list_splice_init(&prep_nblist, &blck_nblist);
1798 				post_cnt = block_cnt;
1799 			} else if (block_cnt == 1) {
1800 				/* last single sgl with non-contiguous xri */
1801 				if (sgl_size > SGL_PAGE_SIZE)
1802 					pdma_phys_sgl1 =
1803 						lpfc_ncmd->dma_phys_sgl +
1804 						SGL_PAGE_SIZE;
1805 				else
1806 					pdma_phys_sgl1 = 0;
1807 				cur_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
1808 				status = lpfc_sli4_post_sgl(phba,
1809 						lpfc_ncmd->dma_phys_sgl,
1810 						pdma_phys_sgl1, cur_xritag);
1811 				if (status) {
1812 					/* failure, put on abort nvme list */
1813 					lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
1814 				} else {
1815 					/* success, put on NVME buffer list */
1816 					lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
1817 					lpfc_ncmd->status = IOSTAT_SUCCESS;
1818 					num_posted++;
1819 				}
1820 				/* success, put on NVME buffer sgl list */
1821 				list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
1822 			}
1823 		}
1824 
1825 		/* continue until a nembed page worth of sgls */
1826 		if (post_cnt == 0)
1827 			continue;
1828 
1829 		/* post block of NVME buffer list sgls */
1830 		status = lpfc_sli4_post_nvme_sgl_block(phba, &blck_nblist,
1831 						       post_cnt);
1832 
1833 		/* don't reset xirtag due to hole in xri block */
1834 		if (block_cnt == 0)
1835 			last_xritag = NO_XRI;
1836 
1837 		/* reset NVME buffer post count for next round of posting */
1838 		post_cnt = 0;
1839 
1840 		/* put posted NVME buffer-sgl posted on NVME buffer sgl list */
1841 		while (!list_empty(&blck_nblist)) {
1842 			list_remove_head(&blck_nblist, lpfc_ncmd,
1843 					 struct lpfc_nvme_buf, list);
1844 			if (status) {
1845 				/* failure, put on abort nvme list */
1846 				lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
1847 			} else {
1848 				/* success, put on NVME buffer list */
1849 				lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
1850 				lpfc_ncmd->status = IOSTAT_SUCCESS;
1851 				num_posted++;
1852 			}
1853 			list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
1854 		}
1855 	}
1856 	/* Push NVME buffers with sgl posted to the available list */
1857 	while (!list_empty(&nvme_nblist)) {
1858 		list_remove_head(&nvme_nblist, lpfc_ncmd,
1859 				 struct lpfc_nvme_buf, list);
1860 		lpfc_release_nvme_buf(phba, lpfc_ncmd);
1861 	}
1862 	return num_posted;
1863 }
1864 
1865 /**
1866  * lpfc_repost_nvme_sgl_list - Repost all the allocated nvme buffer sgls
1867  * @phba: pointer to lpfc hba data structure.
1868  *
1869  * This routine walks the list of nvme buffers that have been allocated and
1870  * repost them to the port by using SGL block post. This is needed after a
1871  * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
1872  * is responsible for moving all nvme buffers on the lpfc_abts_nvme_sgl_list
1873  * to the lpfc_nvme_buf_list. If the repost fails, reject all nvme buffers.
1874  *
1875  * Returns: 0 = success, non-zero failure.
1876  **/
1877 int
1878 lpfc_repost_nvme_sgl_list(struct lpfc_hba *phba)
1879 {
1880 	LIST_HEAD(post_nblist);
1881 	int num_posted, rc = 0;
1882 
1883 	/* get all NVME buffers need to repost to a local list */
1884 	spin_lock_irq(&phba->nvme_buf_list_get_lock);
1885 	spin_lock(&phba->nvme_buf_list_put_lock);
1886 	list_splice_init(&phba->lpfc_nvme_buf_list_get, &post_nblist);
1887 	list_splice(&phba->lpfc_nvme_buf_list_put, &post_nblist);
1888 	spin_unlock(&phba->nvme_buf_list_put_lock);
1889 	spin_unlock_irq(&phba->nvme_buf_list_get_lock);
1890 
1891 	/* post the list of nvme buffer sgls to port if available */
1892 	if (!list_empty(&post_nblist)) {
1893 		num_posted = lpfc_post_nvme_sgl_list(phba, &post_nblist,
1894 						phba->sli4_hba.nvme_xri_cnt);
1895 		/* failed to post any nvme buffer, return error */
1896 		if (num_posted == 0)
1897 			rc = -EIO;
1898 	}
1899 	return rc;
1900 }
1901 
1902 /**
1903  * lpfc_new_nvme_buf - Scsi buffer allocator for HBA with SLI4 IF spec
1904  * @vport: The virtual port for which this call being executed.
1905  * @num_to_allocate: The requested number of buffers to allocate.
1906  *
1907  * This routine allocates nvme buffers for device with SLI-4 interface spec,
1908  * the nvme buffer contains all the necessary information needed to initiate
1909  * a NVME I/O. After allocating up to @num_to_allocate NVME buffers and put
1910  * them on a list, it post them to the port by using SGL block post.
1911  *
1912  * Return codes:
1913  *   int - number of nvme buffers that were allocated and posted.
1914  *   0 = failure, less than num_to_alloc is a partial failure.
1915  **/
1916 static int
1917 lpfc_new_nvme_buf(struct lpfc_vport *vport, int num_to_alloc)
1918 {
1919 	struct lpfc_hba *phba = vport->phba;
1920 	struct lpfc_nvme_buf *lpfc_ncmd;
1921 	struct lpfc_iocbq *pwqeq;
1922 	union lpfc_wqe128 *wqe;
1923 	struct sli4_sge *sgl;
1924 	dma_addr_t pdma_phys_sgl;
1925 	uint16_t iotag, lxri = 0;
1926 	int bcnt, num_posted, sgl_size;
1927 	LIST_HEAD(prep_nblist);
1928 	LIST_HEAD(post_nblist);
1929 	LIST_HEAD(nvme_nblist);
1930 
1931 	sgl_size = phba->cfg_sg_dma_buf_size;
1932 
1933 	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
1934 		lpfc_ncmd = kzalloc(sizeof(struct lpfc_nvme_buf), GFP_KERNEL);
1935 		if (!lpfc_ncmd)
1936 			break;
1937 		/*
1938 		 * Get memory from the pci pool to map the virt space to
1939 		 * pci bus space for an I/O. The DMA buffer includes the
1940 		 * number of SGE's necessary to support the sg_tablesize.
1941 		 */
1942 		lpfc_ncmd->data = pci_pool_alloc(phba->lpfc_sg_dma_buf_pool,
1943 						 GFP_KERNEL,
1944 						 &lpfc_ncmd->dma_handle);
1945 		if (!lpfc_ncmd->data) {
1946 			kfree(lpfc_ncmd);
1947 			break;
1948 		}
1949 		memset(lpfc_ncmd->data, 0, phba->cfg_sg_dma_buf_size);
1950 
1951 		lxri = lpfc_sli4_next_xritag(phba);
1952 		if (lxri == NO_XRI) {
1953 			pci_pool_free(phba->lpfc_sg_dma_buf_pool,
1954 				      lpfc_ncmd->data, lpfc_ncmd->dma_handle);
1955 			kfree(lpfc_ncmd);
1956 			break;
1957 		}
1958 		pwqeq = &(lpfc_ncmd->cur_iocbq);
1959 		wqe = (union lpfc_wqe128 *)&pwqeq->wqe;
1960 
1961 		/* Allocate iotag for lpfc_ncmd->cur_iocbq. */
1962 		iotag = lpfc_sli_next_iotag(phba, pwqeq);
1963 		if (iotag == 0) {
1964 			pci_pool_free(phba->lpfc_sg_dma_buf_pool,
1965 				      lpfc_ncmd->data, lpfc_ncmd->dma_handle);
1966 			kfree(lpfc_ncmd);
1967 			lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
1968 					"6121 Failed to allocated IOTAG for"
1969 					" XRI:0x%x\n", lxri);
1970 			lpfc_sli4_free_xri(phba, lxri);
1971 			break;
1972 		}
1973 		pwqeq->sli4_lxritag = lxri;
1974 		pwqeq->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
1975 		pwqeq->iocb_flag |= LPFC_IO_NVME;
1976 		pwqeq->context1 = lpfc_ncmd;
1977 		pwqeq->wqe_cmpl = lpfc_nvme_io_cmd_wqe_cmpl;
1978 
1979 		/* Initialize local short-hand pointers. */
1980 		lpfc_ncmd->nvme_sgl = lpfc_ncmd->data;
1981 		sgl = lpfc_ncmd->nvme_sgl;
1982 		pdma_phys_sgl = lpfc_ncmd->dma_handle;
1983 		lpfc_ncmd->dma_phys_sgl = pdma_phys_sgl;
1984 
1985 		/* Rsp SGE will be filled in when we rcv an IO
1986 		 * from the NVME Layer to be sent.
1987 		 * The cmd is going to be embedded so we need a SKIP SGE.
1988 		 */
1989 		bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_SKIP);
1990 		bf_set(lpfc_sli4_sge_last, sgl, 0);
1991 		sgl->word2 = cpu_to_le32(sgl->word2);
1992 		/* Fill in word 3 / sgl_len during cmd submission */
1993 
1994 		lpfc_ncmd->cur_iocbq.context1 = lpfc_ncmd;
1995 
1996 		/* Word 7 */
1997 		bf_set(wqe_erp, &wqe->generic.wqe_com, 0);
1998 		/* NVME upper layers will time things out, if needed */
1999 		bf_set(wqe_tmo, &wqe->generic.wqe_com, 0);
2000 
2001 		/* Word 10 */
2002 		bf_set(wqe_ebde_cnt, &wqe->generic.wqe_com, 0);
2003 		bf_set(wqe_dbde, &wqe->generic.wqe_com, 1);
2004 
2005 		/* add the nvme buffer to a post list */
2006 		list_add_tail(&lpfc_ncmd->list, &post_nblist);
2007 		spin_lock_irq(&phba->nvme_buf_list_get_lock);
2008 		phba->sli4_hba.nvme_xri_cnt++;
2009 		spin_unlock_irq(&phba->nvme_buf_list_get_lock);
2010 	}
2011 	lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
2012 			"6114 Allocate %d out of %d requested new NVME "
2013 			"buffers\n", bcnt, num_to_alloc);
2014 
2015 	/* post the list of nvme buffer sgls to port if available */
2016 	if (!list_empty(&post_nblist))
2017 		num_posted = lpfc_post_nvme_sgl_list(phba,
2018 						     &post_nblist, bcnt);
2019 	else
2020 		num_posted = 0;
2021 
2022 	return num_posted;
2023 }
2024 
2025 /**
2026  * lpfc_get_nvme_buf - Get a nvme buffer from lpfc_nvme_buf_list of the HBA
2027  * @phba: The HBA for which this call is being executed.
2028  *
2029  * This routine removes a nvme buffer from head of @phba lpfc_nvme_buf_list list
2030  * and returns to caller.
2031  *
2032  * Return codes:
2033  *   NULL - Error
2034  *   Pointer to lpfc_nvme_buf - Success
2035  **/
2036 static struct lpfc_nvme_buf *
2037 lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
2038 {
2039 	struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
2040 	unsigned long iflag = 0;
2041 	int found = 0;
2042 
2043 	spin_lock_irqsave(&phba->nvme_buf_list_get_lock, iflag);
2044 	list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
2045 				 &phba->lpfc_nvme_buf_list_get, list) {
2046 		if (lpfc_test_rrq_active(phba, ndlp,
2047 					 lpfc_ncmd->cur_iocbq.sli4_lxritag))
2048 			continue;
2049 		list_del_init(&lpfc_ncmd->list);
2050 		found = 1;
2051 		break;
2052 	}
2053 	if (!found) {
2054 		spin_lock(&phba->nvme_buf_list_put_lock);
2055 		list_splice(&phba->lpfc_nvme_buf_list_put,
2056 			    &phba->lpfc_nvme_buf_list_get);
2057 		INIT_LIST_HEAD(&phba->lpfc_nvme_buf_list_put);
2058 		spin_unlock(&phba->nvme_buf_list_put_lock);
2059 		list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
2060 					 &phba->lpfc_nvme_buf_list_get, list) {
2061 			if (lpfc_test_rrq_active(
2062 				phba, ndlp, lpfc_ncmd->cur_iocbq.sli4_lxritag))
2063 				continue;
2064 			list_del_init(&lpfc_ncmd->list);
2065 			found = 1;
2066 			break;
2067 		}
2068 	}
2069 	spin_unlock_irqrestore(&phba->nvme_buf_list_get_lock, iflag);
2070 	if (!found)
2071 		return NULL;
2072 	return  lpfc_ncmd;
2073 }
2074 
2075 /**
2076  * lpfc_release_nvme_buf: Return a nvme buffer back to hba nvme buf list.
2077  * @phba: The Hba for which this call is being executed.
2078  * @lpfc_ncmd: The nvme buffer which is being released.
2079  *
2080  * This routine releases @lpfc_ncmd nvme buffer by adding it to tail of @phba
2081  * lpfc_nvme_buf_list list. For SLI4 XRI's are tied to the nvme buffer
2082  * and cannot be reused for at least RA_TOV amount of time if it was
2083  * aborted.
2084  **/
2085 static void
2086 lpfc_release_nvme_buf(struct lpfc_hba *phba, struct lpfc_nvme_buf *lpfc_ncmd)
2087 {
2088 	unsigned long iflag = 0;
2089 
2090 	lpfc_ncmd->nonsg_phys = 0;
2091 	if (lpfc_ncmd->flags & LPFC_SBUF_XBUSY) {
2092 		lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
2093 				"6310 XB release deferred for "
2094 				"ox_id x%x on reqtag x%x\n",
2095 				lpfc_ncmd->cur_iocbq.sli4_xritag,
2096 				lpfc_ncmd->cur_iocbq.iotag);
2097 
2098 		spin_lock_irqsave(&phba->sli4_hba.abts_nvme_buf_list_lock,
2099 					iflag);
2100 		lpfc_ncmd->nvmeCmd = NULL;
2101 		list_add_tail(&lpfc_ncmd->list,
2102 			&phba->sli4_hba.lpfc_abts_nvme_buf_list);
2103 		spin_unlock_irqrestore(&phba->sli4_hba.abts_nvme_buf_list_lock,
2104 					iflag);
2105 	} else {
2106 		lpfc_ncmd->nvmeCmd = NULL;
2107 		lpfc_ncmd->cur_iocbq.iocb_flag = LPFC_IO_NVME;
2108 		spin_lock_irqsave(&phba->nvme_buf_list_put_lock, iflag);
2109 		list_add_tail(&lpfc_ncmd->list, &phba->lpfc_nvme_buf_list_put);
2110 		spin_unlock_irqrestore(&phba->nvme_buf_list_put_lock, iflag);
2111 	}
2112 }
2113 
2114 /**
2115  * lpfc_nvme_create_localport - Create/Bind an nvme localport instance.
2116  * @pvport - the lpfc_vport instance requesting a localport.
2117  *
2118  * This routine is invoked to create an nvme localport instance to bind
2119  * to the nvme_fc_transport.  It is called once during driver load
2120  * like lpfc_create_shost after all other services are initialized.
2121  * It requires a vport, vpi, and wwns at call time.  Other localport
2122  * parameters are modified as the driver's FCID and the Fabric WWN
2123  * are established.
2124  *
2125  * Return codes
2126  *      0 - successful
2127  *      -ENOMEM - no heap memory available
2128  *      other values - from nvme registration upcall
2129  **/
2130 int
2131 lpfc_nvme_create_localport(struct lpfc_vport *vport)
2132 {
2133 	int ret = 0;
2134 	struct lpfc_hba  *phba = vport->phba;
2135 	struct nvme_fc_port_info nfcp_info;
2136 	struct nvme_fc_local_port *localport;
2137 	struct lpfc_nvme_lport *lport;
2138 	int len;
2139 
2140 	/* Initialize this localport instance.  The vport wwn usage ensures
2141 	 * that NPIV is accounted for.
2142 	 */
2143 	memset(&nfcp_info, 0, sizeof(struct nvme_fc_port_info));
2144 	nfcp_info.port_role = FC_PORT_ROLE_NVME_INITIATOR;
2145 	nfcp_info.node_name = wwn_to_u64(vport->fc_nodename.u.wwn);
2146 	nfcp_info.port_name = wwn_to_u64(vport->fc_portname.u.wwn);
2147 
2148 	/* Limit to LPFC_MAX_NVME_SEG_CNT.
2149 	 * For now need + 1 to get around NVME transport logic.
2150 	 */
2151 	if (phba->cfg_sg_seg_cnt > LPFC_MAX_NVME_SEG_CNT) {
2152 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME | LOG_INIT,
2153 				 "6300 Reducing sg segment cnt to %d\n",
2154 				 LPFC_MAX_NVME_SEG_CNT);
2155 		phba->cfg_nvme_seg_cnt = LPFC_MAX_NVME_SEG_CNT;
2156 	} else {
2157 		phba->cfg_nvme_seg_cnt = phba->cfg_sg_seg_cnt;
2158 	}
2159 	lpfc_nvme_template.max_sgl_segments = phba->cfg_nvme_seg_cnt + 1;
2160 	lpfc_nvme_template.max_hw_queues = phba->cfg_nvme_io_channel;
2161 
2162 	/* localport is allocated from the stack, but the registration
2163 	 * call allocates heap memory as well as the private area.
2164 	 */
2165 #if (IS_ENABLED(CONFIG_NVME_FC))
2166 	ret = nvme_fc_register_localport(&nfcp_info, &lpfc_nvme_template,
2167 					 &vport->phba->pcidev->dev, &localport);
2168 #else
2169 	ret = -ENOMEM;
2170 #endif
2171 	if (!ret) {
2172 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME | LOG_NVME_DISC,
2173 				 "6005 Successfully registered local "
2174 				 "NVME port num %d, localP %p, private %p, "
2175 				 "sg_seg %d\n",
2176 				 localport->port_num, localport,
2177 				 localport->private,
2178 				 lpfc_nvme_template.max_sgl_segments);
2179 
2180 		/* Private is our lport size declared in the template. */
2181 		lport = (struct lpfc_nvme_lport *)localport->private;
2182 		vport->localport = localport;
2183 		lport->vport = vport;
2184 		vport->nvmei_support = 1;
2185 		len  = lpfc_new_nvme_buf(vport, phba->sli4_hba.nvme_xri_max);
2186 		vport->phba->total_nvme_bufs += len;
2187 	}
2188 
2189 	return ret;
2190 }
2191 
2192 /**
2193  * lpfc_nvme_destroy_localport - Destroy lpfc_nvme bound to nvme transport.
2194  * @pnvme: pointer to lpfc nvme data structure.
2195  *
2196  * This routine is invoked to destroy all lports bound to the phba.
2197  * The lport memory was allocated by the nvme fc transport and is
2198  * released there.  This routine ensures all rports bound to the
2199  * lport have been disconnected.
2200  *
2201  **/
2202 void
2203 lpfc_nvme_destroy_localport(struct lpfc_vport *vport)
2204 {
2205 #if (IS_ENABLED(CONFIG_NVME_FC))
2206 	struct nvme_fc_local_port *localport;
2207 	struct lpfc_nvme_lport *lport;
2208 	int ret;
2209 
2210 	if (vport->nvmei_support == 0)
2211 		return;
2212 
2213 	localport = vport->localport;
2214 	vport->localport = NULL;
2215 	lport = (struct lpfc_nvme_lport *)localport->private;
2216 
2217 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
2218 			 "6011 Destroying NVME localport %p\n",
2219 			 localport);
2220 
2221 	/* lport's rport list is clear.  Unregister
2222 	 * lport and release resources.
2223 	 */
2224 	init_completion(&lport->lport_unreg_done);
2225 	ret = nvme_fc_unregister_localport(localport);
2226 	wait_for_completion_timeout(&lport->lport_unreg_done, 5);
2227 
2228 	/* Regardless of the unregister upcall response, clear
2229 	 * nvmei_support.  All rports are unregistered and the
2230 	 * driver will clean up.
2231 	 */
2232 	vport->nvmei_support = 0;
2233 	if (ret == 0) {
2234 		lpfc_printf_vlog(vport,
2235 				 KERN_INFO, LOG_NVME_DISC,
2236 				 "6009 Unregistered lport Success\n");
2237 	} else {
2238 		lpfc_printf_vlog(vport,
2239 				 KERN_INFO, LOG_NVME_DISC,
2240 				 "6010 Unregistered lport "
2241 				 "Failed, status x%x\n",
2242 				 ret);
2243 	}
2244 #endif
2245 }
2246 
2247 void
2248 lpfc_nvme_update_localport(struct lpfc_vport *vport)
2249 {
2250 #if (IS_ENABLED(CONFIG_NVME_FC))
2251 	struct nvme_fc_local_port *localport;
2252 	struct lpfc_nvme_lport *lport;
2253 
2254 	localport = vport->localport;
2255 	if (!localport) {
2256 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_NVME,
2257 				 "6710 Update NVME fail. No localport\n");
2258 		return;
2259 	}
2260 	lport = (struct lpfc_nvme_lport *)localport->private;
2261 	if (!lport) {
2262 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_NVME,
2263 				 "6171 Update NVME fail. localP %p, No lport\n",
2264 				 localport);
2265 		return;
2266 	}
2267 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
2268 			 "6012 Update NVME lport %p did x%x\n",
2269 			 localport, vport->fc_myDID);
2270 
2271 	localport->port_id = vport->fc_myDID;
2272 	if (localport->port_id == 0)
2273 		localport->port_role = FC_PORT_ROLE_NVME_DISCOVERY;
2274 	else
2275 		localport->port_role = FC_PORT_ROLE_NVME_INITIATOR;
2276 
2277 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
2278 			 "6030 bound lport %p to DID x%06x\n",
2279 			 lport, localport->port_id);
2280 #endif
2281 }
2282 
2283 int
2284 lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
2285 {
2286 #if (IS_ENABLED(CONFIG_NVME_FC))
2287 	int ret = 0;
2288 	struct nvme_fc_local_port *localport;
2289 	struct lpfc_nvme_lport *lport;
2290 	struct lpfc_nvme_rport *rport;
2291 	struct nvme_fc_remote_port *remote_port;
2292 	struct nvme_fc_port_info rpinfo;
2293 
2294 	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NVME_DISC,
2295 			 "6006 Register NVME PORT. DID x%06x nlptype x%x\n",
2296 			 ndlp->nlp_DID, ndlp->nlp_type);
2297 
2298 	localport = vport->localport;
2299 	lport = (struct lpfc_nvme_lport *)localport->private;
2300 
2301 	/* NVME rports are not preserved across devloss.
2302 	 * Just register this instance.  Note, rpinfo->dev_loss_tmo
2303 	 * is left 0 to indicate accept transport defaults.  The
2304 	 * driver communicates port role capabilities consistent
2305 	 * with the PRLI response data.
2306 	 */
2307 	memset(&rpinfo, 0, sizeof(struct nvme_fc_port_info));
2308 	rpinfo.port_id = ndlp->nlp_DID;
2309 	if (ndlp->nlp_type & NLP_NVME_TARGET)
2310 		rpinfo.port_role |= FC_PORT_ROLE_NVME_TARGET;
2311 	if (ndlp->nlp_type & NLP_NVME_INITIATOR)
2312 		rpinfo.port_role |= FC_PORT_ROLE_NVME_INITIATOR;
2313 
2314 	if (ndlp->nlp_type & NLP_NVME_DISCOVERY)
2315 		rpinfo.port_role |= FC_PORT_ROLE_NVME_DISCOVERY;
2316 
2317 	rpinfo.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn);
2318 	rpinfo.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn);
2319 	ret = nvme_fc_register_remoteport(localport, &rpinfo, &remote_port);
2320 	if (!ret) {
2321 		/* If the ndlp already has an nrport, this is just
2322 		 * a resume of the existing rport.  Else this is a
2323 		 * new rport.
2324 		 */
2325 		rport = remote_port->private;
2326 		if (ndlp->nrport == rport) {
2327 			lpfc_printf_vlog(ndlp->vport, KERN_INFO,
2328 					 LOG_NVME_DISC,
2329 					 "6014 Rebinding lport to "
2330 					 "rport wwpn 0x%llx, "
2331 					 "Data: x%x x%x x%x x%06x\n",
2332 					 remote_port->port_name,
2333 					 remote_port->port_id,
2334 					 remote_port->port_role,
2335 					 ndlp->nlp_type,
2336 					 ndlp->nlp_DID);
2337 		} else {
2338 			/* New rport. */
2339 			rport->remoteport = remote_port;
2340 			rport->lport = lport;
2341 			rport->ndlp = lpfc_nlp_get(ndlp);
2342 			if (!rport->ndlp)
2343 				return -1;
2344 			ndlp->nrport = rport;
2345 			lpfc_printf_vlog(vport, KERN_INFO,
2346 					 LOG_NVME_DISC | LOG_NODE,
2347 					 "6022 Binding new rport to "
2348 					 "lport %p Rport WWNN 0x%llx, "
2349 					 "Rport WWPN 0x%llx DID "
2350 					 "x%06x Role x%x\n",
2351 					 lport,
2352 					 rpinfo.node_name, rpinfo.port_name,
2353 					 rpinfo.port_id, rpinfo.port_role);
2354 		}
2355 	} else {
2356 		lpfc_printf_vlog(vport, KERN_ERR,
2357 				 LOG_NVME_DISC | LOG_NODE,
2358 				 "6031 RemotePort Registration failed "
2359 				 "err: %d, DID x%06x\n",
2360 				 ret, ndlp->nlp_DID);
2361 	}
2362 
2363 	return ret;
2364 #else
2365 	return 0;
2366 #endif
2367 }
2368 
2369 /* lpfc_nvme_unregister_port - unbind the DID and port_role from this rport.
2370  *
2371  * There is no notion of Devloss or rport recovery from the current
2372  * nvme_transport perspective.  Loss of an rport just means IO cannot
2373  * be sent and recovery is completely up to the initator.
2374  * For now, the driver just unbinds the DID and port_role so that
2375  * no further IO can be issued.  Changes are planned for later.
2376  *
2377  * Notes - the ndlp reference count is not decremented here since
2378  * since there is no nvme_transport api for devloss.  Node ref count
2379  * is only adjusted in driver unload.
2380  */
2381 void
2382 lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
2383 {
2384 #if (IS_ENABLED(CONFIG_NVME_FC))
2385 	int ret;
2386 	struct nvme_fc_local_port *localport;
2387 	struct lpfc_nvme_lport *lport;
2388 	struct lpfc_nvme_rport *rport;
2389 	struct nvme_fc_remote_port *remoteport;
2390 
2391 	localport = vport->localport;
2392 
2393 	/* This is fundamental error.  The localport is always
2394 	 * available until driver unload.  Just exit.
2395 	 */
2396 	if (!localport)
2397 		return;
2398 
2399 	lport = (struct lpfc_nvme_lport *)localport->private;
2400 	if (!lport)
2401 		goto input_err;
2402 
2403 	rport = ndlp->nrport;
2404 	if (!rport)
2405 		goto input_err;
2406 
2407 	remoteport = rport->remoteport;
2408 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
2409 			 "6033 Unreg nvme remoteport %p, portname x%llx, "
2410 			 "port_id x%06x, portstate x%x port type x%x\n",
2411 			 remoteport, remoteport->port_name,
2412 			 remoteport->port_id, remoteport->port_state,
2413 			 ndlp->nlp_type);
2414 
2415 	/* Sanity check ndlp type.  Only call for NVME ports. Don't
2416 	 * clear any rport state until the transport calls back.
2417 	 */
2418 	if (ndlp->nlp_type & (NLP_NVME_TARGET | NLP_NVME_INITIATOR)) {
2419 		init_completion(&rport->rport_unreg_done);
2420 
2421 		/* No concern about the role change on the nvme remoteport.
2422 		 * The transport will update it.
2423 		 */
2424 		ret = nvme_fc_unregister_remoteport(remoteport);
2425 		if (ret != 0) {
2426 			lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
2427 					 "6167 NVME unregister failed %d "
2428 					 "port_state x%x\n",
2429 					 ret, remoteport->port_state);
2430 		}
2431 
2432 	}
2433 	return;
2434 
2435  input_err:
2436 #endif
2437 	lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
2438 			 "6168 State error: lport %p, rport%p FCID x%06x\n",
2439 			 vport->localport, ndlp->rport, ndlp->nlp_DID);
2440 }
2441 
2442 /**
2443  * lpfc_sli4_nvme_xri_aborted - Fast-path process of NVME xri abort
2444  * @phba: pointer to lpfc hba data structure.
2445  * @axri: pointer to the fcp xri abort wcqe structure.
2446  *
2447  * This routine is invoked by the worker thread to process a SLI4 fast-path
2448  * FCP aborted xri.
2449  **/
2450 void
2451 lpfc_sli4_nvme_xri_aborted(struct lpfc_hba *phba,
2452 			   struct sli4_wcqe_xri_aborted *axri)
2453 {
2454 	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
2455 	uint16_t rxid = bf_get(lpfc_wcqe_xa_remote_xid, axri);
2456 	struct lpfc_nvme_buf *lpfc_ncmd, *next_lpfc_ncmd;
2457 	struct lpfc_nodelist *ndlp;
2458 	unsigned long iflag = 0;
2459 	int rrq_empty = 0;
2460 
2461 	if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME))
2462 		return;
2463 	spin_lock_irqsave(&phba->hbalock, iflag);
2464 	spin_lock(&phba->sli4_hba.abts_nvme_buf_list_lock);
2465 	list_for_each_entry_safe(lpfc_ncmd, next_lpfc_ncmd,
2466 				 &phba->sli4_hba.lpfc_abts_nvme_buf_list,
2467 				 list) {
2468 		if (lpfc_ncmd->cur_iocbq.sli4_xritag == xri) {
2469 			list_del_init(&lpfc_ncmd->list);
2470 			lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
2471 			lpfc_ncmd->status = IOSTAT_SUCCESS;
2472 			spin_unlock(
2473 				&phba->sli4_hba.abts_nvme_buf_list_lock);
2474 
2475 			rrq_empty = list_empty(&phba->active_rrq_list);
2476 			spin_unlock_irqrestore(&phba->hbalock, iflag);
2477 			ndlp = lpfc_ncmd->ndlp;
2478 			if (ndlp) {
2479 				lpfc_set_rrq_active(
2480 					phba, ndlp,
2481 					lpfc_ncmd->cur_iocbq.sli4_lxritag,
2482 					rxid, 1);
2483 				lpfc_sli4_abts_err_handler(phba, ndlp, axri);
2484 			}
2485 
2486 			lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
2487 					"6311 XRI Aborted xri x%x tag x%x "
2488 					"released\n",
2489 					xri, lpfc_ncmd->cur_iocbq.iotag);
2490 
2491 			lpfc_release_nvme_buf(phba, lpfc_ncmd);
2492 			if (rrq_empty)
2493 				lpfc_worker_wake_up(phba);
2494 			return;
2495 		}
2496 	}
2497 	spin_unlock(&phba->sli4_hba.abts_nvme_buf_list_lock);
2498 	spin_unlock_irqrestore(&phba->hbalock, iflag);
2499 
2500 	lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
2501 			"6312 XRI Aborted xri x%x not found\n", xri);
2502 
2503 }
2504