1 /******************************************************************* 2 * This file is part of the Emulex Linux Device Driver for * 3 * Fibre Channel Host Bus Adapters. * 4 * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term * 5 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * 6 * Copyright (C) 2004-2016 Emulex. All rights reserved. * 7 * EMULEX and SLI are trademarks of Emulex. * 8 * www.broadcom.com * 9 * Portions Copyright (C) 2004-2005 Christoph Hellwig * 10 * * 11 * This program is free software; you can redistribute it and/or * 12 * modify it under the terms of version 2 of the GNU General * 13 * Public License as published by the Free Software Foundation. * 14 * This program is distributed in the hope that it will be useful. * 15 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * 16 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * 17 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * 18 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * 19 * TO BE LEGALLY INVALID. See the GNU General Public License for * 20 * more details, a copy of which can be found in the file COPYING * 21 * included with this package. * 22 *******************************************************************/ 23 24 #include <linux/blkdev.h> 25 #include <linux/pci.h> 26 #include <linux/slab.h> 27 #include <linux/interrupt.h> 28 29 #include <scsi/scsi_device.h> 30 #include <scsi/scsi_transport_fc.h> 31 #include <scsi/scsi.h> 32 #include <scsi/fc/fc_fs.h> 33 34 #include "lpfc_hw4.h" 35 #include "lpfc_hw.h" 36 #include "lpfc_sli.h" 37 #include "lpfc_sli4.h" 38 #include "lpfc_nl.h" 39 #include "lpfc_disc.h" 40 #include "lpfc_scsi.h" 41 #include "lpfc.h" 42 #include "lpfc_logmsg.h" 43 #include "lpfc_crtn.h" 44 #include "lpfc_compat.h" 45 46 /** 47 * lpfc_dump_static_vport - Dump HBA's static vport information. 48 * @phba: pointer to lpfc hba data structure. 49 * @pmb: pointer to the driver internal queue element for mailbox command. 50 * @offset: offset for dumping vport info. 51 * 52 * The dump mailbox command provides a method for the device driver to obtain 53 * various types of information from the HBA device. 54 * 55 * This routine prepares the mailbox command for dumping list of static 56 * vports to be created. 57 **/ 58 int 59 lpfc_dump_static_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, 60 uint16_t offset) 61 { 62 MAILBOX_t *mb; 63 struct lpfc_dmabuf *mp; 64 65 mb = &pmb->u.mb; 66 67 /* Setup to dump vport info region */ 68 memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); 69 mb->mbxCommand = MBX_DUMP_MEMORY; 70 mb->un.varDmp.type = DMP_NV_PARAMS; 71 mb->un.varDmp.entry_index = offset; 72 mb->un.varDmp.region_id = DMP_REGION_VPORT; 73 mb->mbxOwner = OWN_HOST; 74 75 /* For SLI3 HBAs data is embedded in mailbox */ 76 if (phba->sli_rev != LPFC_SLI_REV4) { 77 mb->un.varDmp.cv = 1; 78 mb->un.varDmp.word_cnt = DMP_RSP_SIZE/sizeof(uint32_t); 79 return 0; 80 } 81 82 /* For SLI4 HBAs driver need to allocate memory */ 83 mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); 84 if (mp) 85 mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); 86 87 if (!mp || !mp->virt) { 88 kfree(mp); 89 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, 90 "2605 lpfc_dump_static_vport: memory" 91 " allocation failed\n"); 92 return 1; 93 } 94 memset(mp->virt, 0, LPFC_BPL_SIZE); 95 INIT_LIST_HEAD(&mp->list); 96 /* save address for completion */ 97 pmb->ctx_buf = (uint8_t *)mp; 98 mb->un.varWords[3] = putPaddrLow(mp->phys); 99 mb->un.varWords[4] = putPaddrHigh(mp->phys); 100 mb->un.varDmp.sli4_length = sizeof(struct static_vport_info); 101 102 return 0; 103 } 104 105 /** 106 * lpfc_down_link - Bring down HBAs link. 107 * @phba: pointer to lpfc hba data structure. 108 * @pmb: pointer to the driver internal queue element for mailbox command. 109 * 110 * This routine prepares a mailbox command to bring down HBA link. 111 **/ 112 void 113 lpfc_down_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 114 { 115 MAILBOX_t *mb; 116 memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); 117 mb = &pmb->u.mb; 118 mb->mbxCommand = MBX_DOWN_LINK; 119 mb->mbxOwner = OWN_HOST; 120 } 121 122 /** 123 * lpfc_dump_mem - Prepare a mailbox command for reading a region. 124 * @phba: pointer to lpfc hba data structure. 125 * @pmb: pointer to the driver internal queue element for mailbox command. 126 * @offset: offset into the region. 127 * @region_id: config region id. 128 * 129 * The dump mailbox command provides a method for the device driver to obtain 130 * various types of information from the HBA device. 131 * 132 * This routine prepares the mailbox command for dumping HBA's config region. 133 **/ 134 void 135 lpfc_dump_mem(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, uint16_t offset, 136 uint16_t region_id) 137 { 138 MAILBOX_t *mb; 139 void *ctx; 140 141 mb = &pmb->u.mb; 142 ctx = pmb->ctx_buf; 143 144 /* Setup to dump VPD region */ 145 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 146 mb->mbxCommand = MBX_DUMP_MEMORY; 147 mb->un.varDmp.cv = 1; 148 mb->un.varDmp.type = DMP_NV_PARAMS; 149 mb->un.varDmp.entry_index = offset; 150 mb->un.varDmp.region_id = region_id; 151 mb->un.varDmp.word_cnt = (DMP_RSP_SIZE / sizeof (uint32_t)); 152 mb->un.varDmp.co = 0; 153 mb->un.varDmp.resp_offset = 0; 154 pmb->ctx_buf = ctx; 155 mb->mbxOwner = OWN_HOST; 156 return; 157 } 158 159 /** 160 * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params 161 * @phba: pointer to lpfc hba data structure. 162 * @pmb: pointer to the driver internal queue element for mailbox command. 163 * 164 * This function create a dump memory mailbox command to dump wake up 165 * parameters. 166 */ 167 void 168 lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 169 { 170 MAILBOX_t *mb; 171 void *ctx; 172 173 mb = &pmb->u.mb; 174 /* Save context so that we can restore after memset */ 175 ctx = pmb->ctx_buf; 176 177 /* Setup to dump VPD region */ 178 memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); 179 mb->mbxCommand = MBX_DUMP_MEMORY; 180 mb->mbxOwner = OWN_HOST; 181 mb->un.varDmp.cv = 1; 182 mb->un.varDmp.type = DMP_NV_PARAMS; 183 if (phba->sli_rev < LPFC_SLI_REV4) 184 mb->un.varDmp.entry_index = 0; 185 mb->un.varDmp.region_id = WAKE_UP_PARMS_REGION_ID; 186 mb->un.varDmp.word_cnt = WAKE_UP_PARMS_WORD_SIZE; 187 mb->un.varDmp.co = 0; 188 mb->un.varDmp.resp_offset = 0; 189 pmb->ctx_buf = ctx; 190 return; 191 } 192 193 /** 194 * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param 195 * @phba: pointer to lpfc hba data structure. 196 * @pmb: pointer to the driver internal queue element for mailbox command. 197 * 198 * The read NVRAM mailbox command returns the HBA's non-volatile parameters 199 * that are used as defaults when the Fibre Channel link is brought on-line. 200 * 201 * This routine prepares the mailbox command for reading information stored 202 * in the HBA's NVRAM. Specifically, the HBA's WWNN and WWPN. 203 **/ 204 void 205 lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) 206 { 207 MAILBOX_t *mb; 208 209 mb = &pmb->u.mb; 210 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 211 mb->mbxCommand = MBX_READ_NV; 212 mb->mbxOwner = OWN_HOST; 213 return; 214 } 215 216 /** 217 * lpfc_config_async - Prepare a mailbox command for enabling HBA async event 218 * @phba: pointer to lpfc hba data structure. 219 * @pmb: pointer to the driver internal queue element for mailbox command. 220 * @ring: ring number for the asynchronous event to be configured. 221 * 222 * The asynchronous event enable mailbox command is used to enable the 223 * asynchronous event posting via the ASYNC_STATUS_CN IOCB response and 224 * specifies the default ring to which events are posted. 225 * 226 * This routine prepares the mailbox command for enabling HBA asynchronous 227 * event support on a IOCB ring. 228 **/ 229 void 230 lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, 231 uint32_t ring) 232 { 233 MAILBOX_t *mb; 234 235 mb = &pmb->u.mb; 236 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 237 mb->mbxCommand = MBX_ASYNCEVT_ENABLE; 238 mb->un.varCfgAsyncEvent.ring = ring; 239 mb->mbxOwner = OWN_HOST; 240 return; 241 } 242 243 /** 244 * lpfc_heart_beat - Prepare a mailbox command for heart beat 245 * @phba: pointer to lpfc hba data structure. 246 * @pmb: pointer to the driver internal queue element for mailbox command. 247 * 248 * The heart beat mailbox command is used to detect an unresponsive HBA, which 249 * is defined as any device where no error attention is sent and both mailbox 250 * and rings are not processed. 251 * 252 * This routine prepares the mailbox command for issuing a heart beat in the 253 * form of mailbox command to the HBA. The timely completion of the heart 254 * beat mailbox command indicates the health of the HBA. 255 **/ 256 void 257 lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) 258 { 259 MAILBOX_t *mb; 260 261 mb = &pmb->u.mb; 262 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 263 mb->mbxCommand = MBX_HEARTBEAT; 264 mb->mbxOwner = OWN_HOST; 265 return; 266 } 267 268 /** 269 * lpfc_read_topology - Prepare a mailbox command for reading HBA topology 270 * @phba: pointer to lpfc hba data structure. 271 * @pmb: pointer to the driver internal queue element for mailbox command. 272 * @mp: DMA buffer memory for reading the link attention information into. 273 * 274 * The read topology mailbox command is issued to read the link topology 275 * information indicated by the HBA port when the Link Event bit of the Host 276 * Attention (HSTATT) register is set to 1 (For SLI-3) or when an FC Link 277 * Attention ACQE is received from the port (For SLI-4). A Link Event 278 * Attention occurs based on an exception detected at the Fibre Channel link 279 * interface. 280 * 281 * This routine prepares the mailbox command for reading HBA link topology 282 * information. A DMA memory has been set aside and address passed to the 283 * HBA through @mp for the HBA to DMA link attention information into the 284 * memory as part of the execution of the mailbox command. 285 * 286 * Return codes 287 * 0 - Success (currently always return 0) 288 **/ 289 int 290 lpfc_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, 291 struct lpfc_dmabuf *mp) 292 { 293 MAILBOX_t *mb; 294 295 mb = &pmb->u.mb; 296 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 297 298 INIT_LIST_HEAD(&mp->list); 299 mb->mbxCommand = MBX_READ_TOPOLOGY; 300 mb->un.varReadTop.lilpBde64.tus.f.bdeSize = LPFC_ALPA_MAP_SIZE; 301 mb->un.varReadTop.lilpBde64.addrHigh = putPaddrHigh(mp->phys); 302 mb->un.varReadTop.lilpBde64.addrLow = putPaddrLow(mp->phys); 303 304 /* Save address for later completion and set the owner to host so that 305 * the FW knows this mailbox is available for processing. 306 */ 307 pmb->ctx_buf = (uint8_t *)mp; 308 mb->mbxOwner = OWN_HOST; 309 return (0); 310 } 311 312 /** 313 * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention 314 * @phba: pointer to lpfc hba data structure. 315 * @pmb: pointer to the driver internal queue element for mailbox command. 316 * 317 * The clear link attention mailbox command is issued to clear the link event 318 * attention condition indicated by the Link Event bit of the Host Attention 319 * (HSTATT) register. The link event attention condition is cleared only if 320 * the event tag specified matches that of the current link event counter. 321 * The current event tag is read using the read link attention event mailbox 322 * command. 323 * 324 * This routine prepares the mailbox command for clearing HBA link attention 325 * information. 326 **/ 327 void 328 lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) 329 { 330 MAILBOX_t *mb; 331 332 mb = &pmb->u.mb; 333 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 334 335 mb->un.varClearLA.eventTag = phba->fc_eventTag; 336 mb->mbxCommand = MBX_CLEAR_LA; 337 mb->mbxOwner = OWN_HOST; 338 return; 339 } 340 341 /** 342 * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA 343 * @phba: pointer to lpfc hba data structure. 344 * @pmb: pointer to the driver internal queue element for mailbox command. 345 * 346 * The configure link mailbox command is used before the initialize link 347 * mailbox command to override default value and to configure link-oriented 348 * parameters such as DID address and various timers. Typically, this 349 * command would be used after an F_Port login to set the returned DID address 350 * and the fabric timeout values. This command is not valid before a configure 351 * port command has configured the HBA port. 352 * 353 * This routine prepares the mailbox command for configuring link on a HBA. 354 **/ 355 void 356 lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) 357 { 358 struct lpfc_vport *vport = phba->pport; 359 MAILBOX_t *mb = &pmb->u.mb; 360 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 361 362 /* NEW_FEATURE 363 * SLI-2, Coalescing Response Feature. 364 */ 365 if (phba->cfg_cr_delay && (phba->sli_rev < LPFC_SLI_REV4)) { 366 mb->un.varCfgLnk.cr = 1; 367 mb->un.varCfgLnk.ci = 1; 368 mb->un.varCfgLnk.cr_delay = phba->cfg_cr_delay; 369 mb->un.varCfgLnk.cr_count = phba->cfg_cr_count; 370 } 371 372 mb->un.varCfgLnk.myId = vport->fc_myDID; 373 mb->un.varCfgLnk.edtov = phba->fc_edtov; 374 mb->un.varCfgLnk.arbtov = phba->fc_arbtov; 375 mb->un.varCfgLnk.ratov = phba->fc_ratov; 376 mb->un.varCfgLnk.rttov = phba->fc_rttov; 377 mb->un.varCfgLnk.altov = phba->fc_altov; 378 mb->un.varCfgLnk.crtov = phba->fc_crtov; 379 mb->un.varCfgLnk.cscn = 0; 380 if (phba->bbcredit_support && phba->cfg_enable_bbcr) { 381 mb->un.varCfgLnk.cscn = 1; 382 mb->un.varCfgLnk.bbscn = bf_get(lpfc_bbscn_def, 383 &phba->sli4_hba.bbscn_params); 384 } 385 386 if (phba->cfg_ack0 && (phba->sli_rev < LPFC_SLI_REV4)) 387 mb->un.varCfgLnk.ack0_enable = 1; 388 389 mb->mbxCommand = MBX_CONFIG_LINK; 390 mb->mbxOwner = OWN_HOST; 391 return; 392 } 393 394 /** 395 * lpfc_config_msi - Prepare a mailbox command for configuring msi-x 396 * @phba: pointer to lpfc hba data structure. 397 * @pmb: pointer to the driver internal queue element for mailbox command. 398 * 399 * The configure MSI-X mailbox command is used to configure the HBA's SLI-3 400 * MSI-X multi-message interrupt vector association to interrupt attention 401 * conditions. 402 * 403 * Return codes 404 * 0 - Success 405 * -EINVAL - Failure 406 **/ 407 int 408 lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 409 { 410 MAILBOX_t *mb = &pmb->u.mb; 411 uint32_t attentionConditions[2]; 412 413 /* Sanity check */ 414 if (phba->cfg_use_msi != 2) { 415 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 416 "0475 Not configured for supporting MSI-X " 417 "cfg_use_msi: 0x%x\n", phba->cfg_use_msi); 418 return -EINVAL; 419 } 420 421 if (phba->sli_rev < 3) { 422 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 423 "0476 HBA not supporting SLI-3 or later " 424 "SLI Revision: 0x%x\n", phba->sli_rev); 425 return -EINVAL; 426 } 427 428 /* Clear mailbox command fields */ 429 memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); 430 431 /* 432 * SLI-3, Message Signaled Interrupt Fearure. 433 */ 434 435 /* Multi-message attention configuration */ 436 attentionConditions[0] = (HA_R0ATT | HA_R1ATT | HA_R2ATT | HA_ERATT | 437 HA_LATT | HA_MBATT); 438 attentionConditions[1] = 0; 439 440 mb->un.varCfgMSI.attentionConditions[0] = attentionConditions[0]; 441 mb->un.varCfgMSI.attentionConditions[1] = attentionConditions[1]; 442 443 /* 444 * Set up message number to HA bit association 445 */ 446 #ifdef __BIG_ENDIAN_BITFIELD 447 /* RA0 (FCP Ring) */ 448 mb->un.varCfgMSI.messageNumberByHA[HA_R0_POS] = 1; 449 /* RA1 (Other Protocol Extra Ring) */ 450 mb->un.varCfgMSI.messageNumberByHA[HA_R1_POS] = 1; 451 #else /* __LITTLE_ENDIAN_BITFIELD */ 452 /* RA0 (FCP Ring) */ 453 mb->un.varCfgMSI.messageNumberByHA[HA_R0_POS^3] = 1; 454 /* RA1 (Other Protocol Extra Ring) */ 455 mb->un.varCfgMSI.messageNumberByHA[HA_R1_POS^3] = 1; 456 #endif 457 /* Multi-message interrupt autoclear configuration*/ 458 mb->un.varCfgMSI.autoClearHA[0] = attentionConditions[0]; 459 mb->un.varCfgMSI.autoClearHA[1] = attentionConditions[1]; 460 461 /* For now, HBA autoclear does not work reliably, disable it */ 462 mb->un.varCfgMSI.autoClearHA[0] = 0; 463 mb->un.varCfgMSI.autoClearHA[1] = 0; 464 465 /* Set command and owner bit */ 466 mb->mbxCommand = MBX_CONFIG_MSI; 467 mb->mbxOwner = OWN_HOST; 468 469 return 0; 470 } 471 472 /** 473 * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA 474 * @phba: pointer to lpfc hba data structure. 475 * @pmb: pointer to the driver internal queue element for mailbox command. 476 * @topology: the link topology for the link to be initialized to. 477 * @linkspeed: the link speed for the link to be initialized to. 478 * 479 * The initialize link mailbox command is used to initialize the Fibre 480 * Channel link. This command must follow a configure port command that 481 * establishes the mode of operation. 482 * 483 * This routine prepares the mailbox command for initializing link on a HBA 484 * with the specified link topology and speed. 485 **/ 486 void 487 lpfc_init_link(struct lpfc_hba * phba, 488 LPFC_MBOXQ_t * pmb, uint32_t topology, uint32_t linkspeed) 489 { 490 lpfc_vpd_t *vpd; 491 MAILBOX_t *mb; 492 493 mb = &pmb->u.mb; 494 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 495 496 switch (topology) { 497 case FLAGS_TOPOLOGY_MODE_LOOP_PT: 498 mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_LOOP; 499 mb->un.varInitLnk.link_flags |= FLAGS_TOPOLOGY_FAILOVER; 500 break; 501 case FLAGS_TOPOLOGY_MODE_PT_PT: 502 mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT; 503 break; 504 case FLAGS_TOPOLOGY_MODE_LOOP: 505 mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_LOOP; 506 break; 507 case FLAGS_TOPOLOGY_MODE_PT_LOOP: 508 mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT; 509 mb->un.varInitLnk.link_flags |= FLAGS_TOPOLOGY_FAILOVER; 510 break; 511 case FLAGS_LOCAL_LB: 512 mb->un.varInitLnk.link_flags = FLAGS_LOCAL_LB; 513 break; 514 } 515 516 if ((phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC || 517 phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC) && 518 !(phba->sli4_hba.pc_sli4_params.pls) && 519 mb->un.varInitLnk.link_flags & FLAGS_TOPOLOGY_MODE_LOOP) { 520 mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT; 521 phba->cfg_topology = FLAGS_TOPOLOGY_MODE_PT_PT; 522 } 523 524 /* Enable asynchronous ABTS responses from firmware */ 525 mb->un.varInitLnk.link_flags |= FLAGS_IMED_ABORT; 526 527 /* NEW_FEATURE 528 * Setting up the link speed 529 */ 530 vpd = &phba->vpd; 531 if (vpd->rev.feaLevelHigh >= 0x02){ 532 switch(linkspeed){ 533 case LPFC_USER_LINK_SPEED_1G: 534 mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED; 535 mb->un.varInitLnk.link_speed = LINK_SPEED_1G; 536 break; 537 case LPFC_USER_LINK_SPEED_2G: 538 mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED; 539 mb->un.varInitLnk.link_speed = LINK_SPEED_2G; 540 break; 541 case LPFC_USER_LINK_SPEED_4G: 542 mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED; 543 mb->un.varInitLnk.link_speed = LINK_SPEED_4G; 544 break; 545 case LPFC_USER_LINK_SPEED_8G: 546 mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED; 547 mb->un.varInitLnk.link_speed = LINK_SPEED_8G; 548 break; 549 case LPFC_USER_LINK_SPEED_10G: 550 mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED; 551 mb->un.varInitLnk.link_speed = LINK_SPEED_10G; 552 break; 553 case LPFC_USER_LINK_SPEED_16G: 554 mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED; 555 mb->un.varInitLnk.link_speed = LINK_SPEED_16G; 556 break; 557 case LPFC_USER_LINK_SPEED_32G: 558 mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED; 559 mb->un.varInitLnk.link_speed = LINK_SPEED_32G; 560 break; 561 case LPFC_USER_LINK_SPEED_64G: 562 mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED; 563 mb->un.varInitLnk.link_speed = LINK_SPEED_64G; 564 break; 565 case LPFC_USER_LINK_SPEED_AUTO: 566 default: 567 mb->un.varInitLnk.link_speed = LINK_SPEED_AUTO; 568 break; 569 } 570 571 } 572 else 573 mb->un.varInitLnk.link_speed = LINK_SPEED_AUTO; 574 575 mb->mbxCommand = (volatile uint8_t)MBX_INIT_LINK; 576 mb->mbxOwner = OWN_HOST; 577 mb->un.varInitLnk.fabric_AL_PA = phba->fc_pref_ALPA; 578 return; 579 } 580 581 /** 582 * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters 583 * @phba: pointer to lpfc hba data structure. 584 * @pmb: pointer to the driver internal queue element for mailbox command. 585 * @vpi: virtual N_Port identifier. 586 * 587 * The read service parameter mailbox command is used to read the HBA port 588 * service parameters. The service parameters are read into the buffer 589 * specified directly by a BDE in the mailbox command. These service 590 * parameters may then be used to build the payload of an N_Port/F_POrt 591 * login request and reply (LOGI/ACC). 592 * 593 * This routine prepares the mailbox command for reading HBA port service 594 * parameters. The DMA memory is allocated in this function and the addresses 595 * are populated into the mailbox command for the HBA to DMA the service 596 * parameters into. 597 * 598 * Return codes 599 * 0 - Success 600 * 1 - DMA memory allocation failed 601 **/ 602 int 603 lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) 604 { 605 struct lpfc_dmabuf *mp; 606 MAILBOX_t *mb; 607 608 mb = &pmb->u.mb; 609 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 610 611 mb->mbxOwner = OWN_HOST; 612 613 /* Get a buffer to hold the HBAs Service Parameters */ 614 615 mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL); 616 if (mp) 617 mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); 618 if (!mp || !mp->virt) { 619 kfree(mp); 620 mb->mbxCommand = MBX_READ_SPARM64; 621 /* READ_SPARAM: no buffers */ 622 lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, 623 "0301 READ_SPARAM: no buffers\n"); 624 return (1); 625 } 626 INIT_LIST_HEAD(&mp->list); 627 mb->mbxCommand = MBX_READ_SPARM64; 628 mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm); 629 mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys); 630 mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys); 631 if (phba->sli_rev >= LPFC_SLI_REV3) 632 mb->un.varRdSparm.vpi = phba->vpi_ids[vpi]; 633 634 /* save address for completion */ 635 pmb->ctx_buf = mp; 636 637 return (0); 638 } 639 640 /** 641 * lpfc_unreg_did - Prepare a mailbox command for unregistering DID 642 * @phba: pointer to lpfc hba data structure. 643 * @vpi: virtual N_Port identifier. 644 * @did: remote port identifier. 645 * @pmb: pointer to the driver internal queue element for mailbox command. 646 * 647 * The unregister DID mailbox command is used to unregister an N_Port/F_Port 648 * login for an unknown RPI by specifying the DID of a remote port. This 649 * command frees an RPI context in the HBA port. This has the effect of 650 * performing an implicit N_Port/F_Port logout. 651 * 652 * This routine prepares the mailbox command for unregistering a remote 653 * N_Port/F_Port (DID) login. 654 **/ 655 void 656 lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, 657 LPFC_MBOXQ_t * pmb) 658 { 659 MAILBOX_t *mb; 660 661 mb = &pmb->u.mb; 662 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 663 664 mb->un.varUnregDID.did = did; 665 mb->un.varUnregDID.vpi = vpi; 666 if ((vpi != 0xffff) && 667 (phba->sli_rev == LPFC_SLI_REV4)) 668 mb->un.varUnregDID.vpi = phba->vpi_ids[vpi]; 669 670 mb->mbxCommand = MBX_UNREG_D_ID; 671 mb->mbxOwner = OWN_HOST; 672 return; 673 } 674 675 /** 676 * lpfc_read_config - Prepare a mailbox command for reading HBA configuration 677 * @phba: pointer to lpfc hba data structure. 678 * @pmb: pointer to the driver internal queue element for mailbox command. 679 * 680 * The read configuration mailbox command is used to read the HBA port 681 * configuration parameters. This mailbox command provides a method for 682 * seeing any parameters that may have changed via various configuration 683 * mailbox commands. 684 * 685 * This routine prepares the mailbox command for reading out HBA configuration 686 * parameters. 687 **/ 688 void 689 lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) 690 { 691 MAILBOX_t *mb; 692 693 mb = &pmb->u.mb; 694 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 695 696 mb->mbxCommand = MBX_READ_CONFIG; 697 mb->mbxOwner = OWN_HOST; 698 return; 699 } 700 701 /** 702 * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats 703 * @phba: pointer to lpfc hba data structure. 704 * @pmb: pointer to the driver internal queue element for mailbox command. 705 * 706 * The read link status mailbox command is used to read the link status from 707 * the HBA. Link status includes all link-related error counters. These 708 * counters are maintained by the HBA and originated in the link hardware 709 * unit. Note that all of these counters wrap. 710 * 711 * This routine prepares the mailbox command for reading out HBA link status. 712 **/ 713 void 714 lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) 715 { 716 MAILBOX_t *mb; 717 718 mb = &pmb->u.mb; 719 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 720 721 mb->mbxCommand = MBX_READ_LNK_STAT; 722 mb->mbxOwner = OWN_HOST; 723 return; 724 } 725 726 /** 727 * lpfc_reg_rpi - Prepare a mailbox command for registering remote login 728 * @phba: pointer to lpfc hba data structure. 729 * @vpi: virtual N_Port identifier. 730 * @did: remote port identifier. 731 * @param: pointer to memory holding the server parameters. 732 * @pmb: pointer to the driver internal queue element for mailbox command. 733 * @rpi: the rpi to use in the registration (usually only used for SLI4. 734 * 735 * The registration login mailbox command is used to register an N_Port or 736 * F_Port login. This registration allows the HBA to cache the remote N_Port 737 * service parameters internally and thereby make the appropriate FC-2 738 * decisions. The remote port service parameters are handed off by the driver 739 * to the HBA using a descriptor entry that directly identifies a buffer in 740 * host memory. In exchange, the HBA returns an RPI identifier. 741 * 742 * This routine prepares the mailbox command for registering remote port login. 743 * The function allocates DMA buffer for passing the service parameters to the 744 * HBA with the mailbox command. 745 * 746 * Return codes 747 * 0 - Success 748 * 1 - DMA memory allocation failed 749 **/ 750 int 751 lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, 752 uint8_t *param, LPFC_MBOXQ_t *pmb, uint16_t rpi) 753 { 754 MAILBOX_t *mb = &pmb->u.mb; 755 uint8_t *sparam; 756 struct lpfc_dmabuf *mp; 757 758 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 759 760 mb->un.varRegLogin.rpi = 0; 761 if (phba->sli_rev == LPFC_SLI_REV4) 762 mb->un.varRegLogin.rpi = phba->sli4_hba.rpi_ids[rpi]; 763 if (phba->sli_rev >= LPFC_SLI_REV3) 764 mb->un.varRegLogin.vpi = phba->vpi_ids[vpi]; 765 mb->un.varRegLogin.did = did; 766 mb->mbxOwner = OWN_HOST; 767 /* Get a buffer to hold NPorts Service Parameters */ 768 mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL); 769 if (mp) 770 mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); 771 if (!mp || !mp->virt) { 772 kfree(mp); 773 mb->mbxCommand = MBX_REG_LOGIN64; 774 /* REG_LOGIN: no buffers */ 775 lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, 776 "0302 REG_LOGIN: no buffers, VPI:%d DID:x%x, " 777 "rpi x%x\n", vpi, did, rpi); 778 return 1; 779 } 780 INIT_LIST_HEAD(&mp->list); 781 sparam = mp->virt; 782 783 /* Copy param's into a new buffer */ 784 memcpy(sparam, param, sizeof (struct serv_parm)); 785 786 /* save address for completion */ 787 pmb->ctx_buf = (uint8_t *)mp; 788 789 mb->mbxCommand = MBX_REG_LOGIN64; 790 mb->un.varRegLogin.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm); 791 mb->un.varRegLogin.un.sp64.addrHigh = putPaddrHigh(mp->phys); 792 mb->un.varRegLogin.un.sp64.addrLow = putPaddrLow(mp->phys); 793 794 return 0; 795 } 796 797 /** 798 * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login 799 * @phba: pointer to lpfc hba data structure. 800 * @vpi: virtual N_Port identifier. 801 * @rpi: remote port identifier 802 * @pmb: pointer to the driver internal queue element for mailbox command. 803 * 804 * The unregistration login mailbox command is used to unregister an N_Port 805 * or F_Port login. This command frees an RPI context in the HBA. It has the 806 * effect of performing an implicit N_Port/F_Port logout. 807 * 808 * This routine prepares the mailbox command for unregistering remote port 809 * login. 810 * 811 * For SLI4 ports, the rpi passed to this function must be the physical 812 * rpi value, not the logical index. 813 **/ 814 void 815 lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, 816 LPFC_MBOXQ_t * pmb) 817 { 818 MAILBOX_t *mb; 819 820 mb = &pmb->u.mb; 821 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 822 823 mb->un.varUnregLogin.rpi = rpi; 824 mb->un.varUnregLogin.rsvd1 = 0; 825 if (phba->sli_rev >= LPFC_SLI_REV3) 826 mb->un.varUnregLogin.vpi = phba->vpi_ids[vpi]; 827 828 mb->mbxCommand = MBX_UNREG_LOGIN; 829 mb->mbxOwner = OWN_HOST; 830 831 return; 832 } 833 834 /** 835 * lpfc_sli4_unreg_all_rpis - unregister all RPIs for a vport on SLI4 HBA. 836 * @vport: pointer to a vport object. 837 * 838 * This routine sends mailbox command to unregister all active RPIs for 839 * a vport. 840 **/ 841 void 842 lpfc_sli4_unreg_all_rpis(struct lpfc_vport *vport) 843 { 844 struct lpfc_hba *phba = vport->phba; 845 LPFC_MBOXQ_t *mbox; 846 int rc; 847 848 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 849 if (mbox) { 850 /* 851 * For SLI4 functions, the rpi field is overloaded for 852 * the vport context unreg all. This routine passes 853 * 0 for the rpi field in lpfc_unreg_login for compatibility 854 * with SLI3 and then overrides the rpi field with the 855 * expected value for SLI4. 856 */ 857 lpfc_unreg_login(phba, vport->vpi, phba->vpi_ids[vport->vpi], 858 mbox); 859 mbox->u.mb.un.varUnregLogin.rsvd1 = 0x4000; 860 mbox->vport = vport; 861 mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; 862 mbox->ctx_ndlp = NULL; 863 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); 864 if (rc == MBX_NOT_FINISHED) 865 mempool_free(mbox, phba->mbox_mem_pool); 866 } 867 } 868 869 /** 870 * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier 871 * @vport: pointer to a vport object. 872 * @pmb: pointer to the driver internal queue element for mailbox command. 873 * 874 * The registration vport identifier mailbox command is used to activate a 875 * virtual N_Port after it has acquired an N_Port_ID. The HBA validates the 876 * N_Port_ID against the information in the selected virtual N_Port context 877 * block and marks it active to allow normal processing of IOCB commands and 878 * received unsolicited exchanges. 879 * 880 * This routine prepares the mailbox command for registering a virtual N_Port. 881 **/ 882 void 883 lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb) 884 { 885 MAILBOX_t *mb = &pmb->u.mb; 886 struct lpfc_hba *phba = vport->phba; 887 888 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 889 /* 890 * Set the re-reg VPI bit for f/w to update the MAC address. 891 */ 892 if ((phba->sli_rev == LPFC_SLI_REV4) && 893 !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) 894 mb->un.varRegVpi.upd = 1; 895 896 mb->un.varRegVpi.vpi = phba->vpi_ids[vport->vpi]; 897 mb->un.varRegVpi.sid = vport->fc_myDID; 898 if (phba->sli_rev == LPFC_SLI_REV4) 899 mb->un.varRegVpi.vfi = phba->sli4_hba.vfi_ids[vport->vfi]; 900 else 901 mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base; 902 memcpy(mb->un.varRegVpi.wwn, &vport->fc_portname, 903 sizeof(struct lpfc_name)); 904 mb->un.varRegVpi.wwn[0] = cpu_to_le32(mb->un.varRegVpi.wwn[0]); 905 mb->un.varRegVpi.wwn[1] = cpu_to_le32(mb->un.varRegVpi.wwn[1]); 906 907 mb->mbxCommand = MBX_REG_VPI; 908 mb->mbxOwner = OWN_HOST; 909 return; 910 911 } 912 913 /** 914 * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id 915 * @phba: pointer to lpfc hba data structure. 916 * @vpi: virtual N_Port identifier. 917 * @pmb: pointer to the driver internal queue element for mailbox command. 918 * 919 * The unregistration vport identifier mailbox command is used to inactivate 920 * a virtual N_Port. The driver must have logged out and unregistered all 921 * remote N_Ports to abort any activity on the virtual N_Port. The HBA will 922 * unregisters any default RPIs associated with the specified vpi, aborting 923 * any active exchanges. The HBA will post the mailbox response after making 924 * the virtual N_Port inactive. 925 * 926 * This routine prepares the mailbox command for unregistering a virtual 927 * N_Port. 928 **/ 929 void 930 lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) 931 { 932 MAILBOX_t *mb = &pmb->u.mb; 933 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 934 935 if (phba->sli_rev == LPFC_SLI_REV3) 936 mb->un.varUnregVpi.vpi = phba->vpi_ids[vpi]; 937 else if (phba->sli_rev >= LPFC_SLI_REV4) 938 mb->un.varUnregVpi.sli4_vpi = phba->vpi_ids[vpi]; 939 940 mb->mbxCommand = MBX_UNREG_VPI; 941 mb->mbxOwner = OWN_HOST; 942 return; 943 944 } 945 946 /** 947 * lpfc_config_pcb_setup - Set up IOCB rings in the Port Control Block (PCB) 948 * @phba: pointer to lpfc hba data structure. 949 * 950 * This routine sets up and initializes the IOCB rings in the Port Control 951 * Block (PCB). 952 **/ 953 static void 954 lpfc_config_pcb_setup(struct lpfc_hba * phba) 955 { 956 struct lpfc_sli *psli = &phba->sli; 957 struct lpfc_sli_ring *pring; 958 PCB_t *pcbp = phba->pcb; 959 dma_addr_t pdma_addr; 960 uint32_t offset; 961 uint32_t iocbCnt = 0; 962 int i; 963 964 pcbp->maxRing = (psli->num_rings - 1); 965 966 for (i = 0; i < psli->num_rings; i++) { 967 pring = &psli->sli3_ring[i]; 968 969 pring->sli.sli3.sizeCiocb = 970 phba->sli_rev == 3 ? SLI3_IOCB_CMD_SIZE : 971 SLI2_IOCB_CMD_SIZE; 972 pring->sli.sli3.sizeRiocb = 973 phba->sli_rev == 3 ? SLI3_IOCB_RSP_SIZE : 974 SLI2_IOCB_RSP_SIZE; 975 /* A ring MUST have both cmd and rsp entries defined to be 976 valid */ 977 if ((pring->sli.sli3.numCiocb == 0) || 978 (pring->sli.sli3.numRiocb == 0)) { 979 pcbp->rdsc[i].cmdEntries = 0; 980 pcbp->rdsc[i].rspEntries = 0; 981 pcbp->rdsc[i].cmdAddrHigh = 0; 982 pcbp->rdsc[i].rspAddrHigh = 0; 983 pcbp->rdsc[i].cmdAddrLow = 0; 984 pcbp->rdsc[i].rspAddrLow = 0; 985 pring->sli.sli3.cmdringaddr = NULL; 986 pring->sli.sli3.rspringaddr = NULL; 987 continue; 988 } 989 /* Command ring setup for ring */ 990 pring->sli.sli3.cmdringaddr = (void *)&phba->IOCBs[iocbCnt]; 991 pcbp->rdsc[i].cmdEntries = pring->sli.sli3.numCiocb; 992 993 offset = (uint8_t *) &phba->IOCBs[iocbCnt] - 994 (uint8_t *) phba->slim2p.virt; 995 pdma_addr = phba->slim2p.phys + offset; 996 pcbp->rdsc[i].cmdAddrHigh = putPaddrHigh(pdma_addr); 997 pcbp->rdsc[i].cmdAddrLow = putPaddrLow(pdma_addr); 998 iocbCnt += pring->sli.sli3.numCiocb; 999 1000 /* Response ring setup for ring */ 1001 pring->sli.sli3.rspringaddr = (void *) &phba->IOCBs[iocbCnt]; 1002 1003 pcbp->rdsc[i].rspEntries = pring->sli.sli3.numRiocb; 1004 offset = (uint8_t *)&phba->IOCBs[iocbCnt] - 1005 (uint8_t *)phba->slim2p.virt; 1006 pdma_addr = phba->slim2p.phys + offset; 1007 pcbp->rdsc[i].rspAddrHigh = putPaddrHigh(pdma_addr); 1008 pcbp->rdsc[i].rspAddrLow = putPaddrLow(pdma_addr); 1009 iocbCnt += pring->sli.sli3.numRiocb; 1010 } 1011 } 1012 1013 /** 1014 * lpfc_read_rev - Prepare a mailbox command for reading HBA revision 1015 * @phba: pointer to lpfc hba data structure. 1016 * @pmb: pointer to the driver internal queue element for mailbox command. 1017 * 1018 * The read revision mailbox command is used to read the revision levels of 1019 * the HBA components. These components include hardware units, resident 1020 * firmware, and available firmware. HBAs that supports SLI-3 mode of 1021 * operation provide different response information depending on the version 1022 * requested by the driver. 1023 * 1024 * This routine prepares the mailbox command for reading HBA revision 1025 * information. 1026 **/ 1027 void 1028 lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) 1029 { 1030 MAILBOX_t *mb = &pmb->u.mb; 1031 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 1032 mb->un.varRdRev.cv = 1; 1033 mb->un.varRdRev.v3req = 1; /* Request SLI3 info */ 1034 mb->mbxCommand = MBX_READ_REV; 1035 mb->mbxOwner = OWN_HOST; 1036 return; 1037 } 1038 1039 void 1040 lpfc_sli4_swap_str(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 1041 { 1042 MAILBOX_t *mb = &pmb->u.mb; 1043 struct lpfc_mqe *mqe; 1044 1045 switch (mb->mbxCommand) { 1046 case MBX_READ_REV: 1047 mqe = &pmb->u.mqe; 1048 lpfc_sli_pcimem_bcopy(mqe->un.read_rev.fw_name, 1049 mqe->un.read_rev.fw_name, 16); 1050 lpfc_sli_pcimem_bcopy(mqe->un.read_rev.ulp_fw_name, 1051 mqe->un.read_rev.ulp_fw_name, 16); 1052 break; 1053 default: 1054 break; 1055 } 1056 return; 1057 } 1058 1059 /** 1060 * lpfc_build_hbq_profile2 - Set up the HBQ Selection Profile 2 1061 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. 1062 * @hbq_desc: pointer to the HBQ selection profile descriptor. 1063 * 1064 * The Host Buffer Queue (HBQ) Selection Profile 2 specifies that the HBA 1065 * tests the incoming frames' R_CTL/TYPE fields with works 10:15 and performs 1066 * the Sequence Length Test using the fields in the Selection Profile 2 1067 * extension in words 20:31. 1068 **/ 1069 static void 1070 lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb, 1071 struct lpfc_hbq_init *hbq_desc) 1072 { 1073 hbqmb->profiles.profile2.seqlenbcnt = hbq_desc->seqlenbcnt; 1074 hbqmb->profiles.profile2.maxlen = hbq_desc->maxlen; 1075 hbqmb->profiles.profile2.seqlenoff = hbq_desc->seqlenoff; 1076 } 1077 1078 /** 1079 * lpfc_build_hbq_profile3 - Set up the HBQ Selection Profile 3 1080 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. 1081 * @hbq_desc: pointer to the HBQ selection profile descriptor. 1082 * 1083 * The Host Buffer Queue (HBQ) Selection Profile 3 specifies that the HBA 1084 * tests the incoming frame's R_CTL/TYPE fields with words 10:15 and performs 1085 * the Sequence Length Test and Byte Field Test using the fields in the 1086 * Selection Profile 3 extension in words 20:31. 1087 **/ 1088 static void 1089 lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb, 1090 struct lpfc_hbq_init *hbq_desc) 1091 { 1092 hbqmb->profiles.profile3.seqlenbcnt = hbq_desc->seqlenbcnt; 1093 hbqmb->profiles.profile3.maxlen = hbq_desc->maxlen; 1094 hbqmb->profiles.profile3.cmdcodeoff = hbq_desc->cmdcodeoff; 1095 hbqmb->profiles.profile3.seqlenoff = hbq_desc->seqlenoff; 1096 memcpy(&hbqmb->profiles.profile3.cmdmatch, hbq_desc->cmdmatch, 1097 sizeof(hbqmb->profiles.profile3.cmdmatch)); 1098 } 1099 1100 /** 1101 * lpfc_build_hbq_profile5 - Set up the HBQ Selection Profile 5 1102 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. 1103 * @hbq_desc: pointer to the HBQ selection profile descriptor. 1104 * 1105 * The Host Buffer Queue (HBQ) Selection Profile 5 specifies a header HBQ. The 1106 * HBA tests the initial frame of an incoming sequence using the frame's 1107 * R_CTL/TYPE fields with words 10:15 and performs the Sequence Length Test 1108 * and Byte Field Test using the fields in the Selection Profile 5 extension 1109 * words 20:31. 1110 **/ 1111 static void 1112 lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb, 1113 struct lpfc_hbq_init *hbq_desc) 1114 { 1115 hbqmb->profiles.profile5.seqlenbcnt = hbq_desc->seqlenbcnt; 1116 hbqmb->profiles.profile5.maxlen = hbq_desc->maxlen; 1117 hbqmb->profiles.profile5.cmdcodeoff = hbq_desc->cmdcodeoff; 1118 hbqmb->profiles.profile5.seqlenoff = hbq_desc->seqlenoff; 1119 memcpy(&hbqmb->profiles.profile5.cmdmatch, hbq_desc->cmdmatch, 1120 sizeof(hbqmb->profiles.profile5.cmdmatch)); 1121 } 1122 1123 /** 1124 * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ 1125 * @phba: pointer to lpfc hba data structure. 1126 * @id: HBQ identifier. 1127 * @hbq_desc: pointer to the HBA descriptor data structure. 1128 * @hbq_entry_index: index of the HBQ entry data structures. 1129 * @pmb: pointer to the driver internal queue element for mailbox command. 1130 * 1131 * The configure HBQ (Host Buffer Queue) mailbox command is used to configure 1132 * an HBQ. The configuration binds events that require buffers to a particular 1133 * ring and HBQ based on a selection profile. 1134 * 1135 * This routine prepares the mailbox command for configuring an HBQ. 1136 **/ 1137 void 1138 lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id, 1139 struct lpfc_hbq_init *hbq_desc, 1140 uint32_t hbq_entry_index, LPFC_MBOXQ_t *pmb) 1141 { 1142 int i; 1143 MAILBOX_t *mb = &pmb->u.mb; 1144 struct config_hbq_var *hbqmb = &mb->un.varCfgHbq; 1145 1146 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 1147 hbqmb->hbqId = id; 1148 hbqmb->entry_count = hbq_desc->entry_count; /* # entries in HBQ */ 1149 hbqmb->recvNotify = hbq_desc->rn; /* Receive 1150 * Notification */ 1151 hbqmb->numMask = hbq_desc->mask_count; /* # R_CTL/TYPE masks 1152 * # in words 0-19 */ 1153 hbqmb->profile = hbq_desc->profile; /* Selection profile: 1154 * 0 = all, 1155 * 7 = logentry */ 1156 hbqmb->ringMask = hbq_desc->ring_mask; /* Binds HBQ to a ring 1157 * e.g. Ring0=b0001, 1158 * ring2=b0100 */ 1159 hbqmb->headerLen = hbq_desc->headerLen; /* 0 if not profile 4 1160 * or 5 */ 1161 hbqmb->logEntry = hbq_desc->logEntry; /* Set to 1 if this 1162 * HBQ will be used 1163 * for LogEntry 1164 * buffers */ 1165 hbqmb->hbqaddrLow = putPaddrLow(phba->hbqslimp.phys) + 1166 hbq_entry_index * sizeof(struct lpfc_hbq_entry); 1167 hbqmb->hbqaddrHigh = putPaddrHigh(phba->hbqslimp.phys); 1168 1169 mb->mbxCommand = MBX_CONFIG_HBQ; 1170 mb->mbxOwner = OWN_HOST; 1171 1172 /* Copy info for profiles 2,3,5. Other 1173 * profiles this area is reserved 1174 */ 1175 if (hbq_desc->profile == 2) 1176 lpfc_build_hbq_profile2(hbqmb, hbq_desc); 1177 else if (hbq_desc->profile == 3) 1178 lpfc_build_hbq_profile3(hbqmb, hbq_desc); 1179 else if (hbq_desc->profile == 5) 1180 lpfc_build_hbq_profile5(hbqmb, hbq_desc); 1181 1182 /* Return if no rctl / type masks for this HBQ */ 1183 if (!hbq_desc->mask_count) 1184 return; 1185 1186 /* Otherwise we setup specific rctl / type masks for this HBQ */ 1187 for (i = 0; i < hbq_desc->mask_count; i++) { 1188 hbqmb->hbqMasks[i].tmatch = hbq_desc->hbqMasks[i].tmatch; 1189 hbqmb->hbqMasks[i].tmask = hbq_desc->hbqMasks[i].tmask; 1190 hbqmb->hbqMasks[i].rctlmatch = hbq_desc->hbqMasks[i].rctlmatch; 1191 hbqmb->hbqMasks[i].rctlmask = hbq_desc->hbqMasks[i].rctlmask; 1192 } 1193 1194 return; 1195 } 1196 1197 /** 1198 * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring 1199 * @phba: pointer to lpfc hba data structure. 1200 * @ring: ring number/index 1201 * @pmb: pointer to the driver internal queue element for mailbox command. 1202 * 1203 * The configure ring mailbox command is used to configure an IOCB ring. This 1204 * configuration binds from one to six of HBA RC_CTL/TYPE mask entries to the 1205 * ring. This is used to map incoming sequences to a particular ring whose 1206 * RC_CTL/TYPE mask entry matches that of the sequence. The driver should not 1207 * attempt to configure a ring whose number is greater than the number 1208 * specified in the Port Control Block (PCB). It is an error to issue the 1209 * configure ring command more than once with the same ring number. The HBA 1210 * returns an error if the driver attempts this. 1211 * 1212 * This routine prepares the mailbox command for configuring IOCB ring. 1213 **/ 1214 void 1215 lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb) 1216 { 1217 int i; 1218 MAILBOX_t *mb = &pmb->u.mb; 1219 struct lpfc_sli *psli; 1220 struct lpfc_sli_ring *pring; 1221 1222 memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); 1223 1224 mb->un.varCfgRing.ring = ring; 1225 mb->un.varCfgRing.maxOrigXchg = 0; 1226 mb->un.varCfgRing.maxRespXchg = 0; 1227 mb->un.varCfgRing.recvNotify = 1; 1228 1229 psli = &phba->sli; 1230 pring = &psli->sli3_ring[ring]; 1231 mb->un.varCfgRing.numMask = pring->num_mask; 1232 mb->mbxCommand = MBX_CONFIG_RING; 1233 mb->mbxOwner = OWN_HOST; 1234 1235 /* Is this ring configured for a specific profile */ 1236 if (pring->prt[0].profile) { 1237 mb->un.varCfgRing.profile = pring->prt[0].profile; 1238 return; 1239 } 1240 1241 /* Otherwise we setup specific rctl / type masks for this ring */ 1242 for (i = 0; i < pring->num_mask; i++) { 1243 mb->un.varCfgRing.rrRegs[i].rval = pring->prt[i].rctl; 1244 if (mb->un.varCfgRing.rrRegs[i].rval != FC_RCTL_ELS_REQ) 1245 mb->un.varCfgRing.rrRegs[i].rmask = 0xff; 1246 else 1247 mb->un.varCfgRing.rrRegs[i].rmask = 0xfe; 1248 mb->un.varCfgRing.rrRegs[i].tval = pring->prt[i].type; 1249 mb->un.varCfgRing.rrRegs[i].tmask = 0xff; 1250 } 1251 1252 return; 1253 } 1254 1255 /** 1256 * lpfc_config_port - Prepare a mailbox command for configuring port 1257 * @phba: pointer to lpfc hba data structure. 1258 * @pmb: pointer to the driver internal queue element for mailbox command. 1259 * 1260 * The configure port mailbox command is used to identify the Port Control 1261 * Block (PCB) in the driver memory. After this command is issued, the 1262 * driver must not access the mailbox in the HBA without first resetting 1263 * the HBA. The HBA may copy the PCB information to internal storage for 1264 * subsequent use; the driver can not change the PCB information unless it 1265 * resets the HBA. 1266 * 1267 * This routine prepares the mailbox command for configuring port. 1268 **/ 1269 void 1270 lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 1271 { 1272 MAILBOX_t __iomem *mb_slim = (MAILBOX_t __iomem *) phba->MBslimaddr; 1273 MAILBOX_t *mb = &pmb->u.mb; 1274 dma_addr_t pdma_addr; 1275 uint32_t bar_low, bar_high; 1276 size_t offset; 1277 struct lpfc_hgp hgp; 1278 int i; 1279 uint32_t pgp_offset; 1280 1281 memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); 1282 mb->mbxCommand = MBX_CONFIG_PORT; 1283 mb->mbxOwner = OWN_HOST; 1284 1285 mb->un.varCfgPort.pcbLen = sizeof(PCB_t); 1286 1287 offset = (uint8_t *)phba->pcb - (uint8_t *)phba->slim2p.virt; 1288 pdma_addr = phba->slim2p.phys + offset; 1289 mb->un.varCfgPort.pcbLow = putPaddrLow(pdma_addr); 1290 mb->un.varCfgPort.pcbHigh = putPaddrHigh(pdma_addr); 1291 1292 /* Always Host Group Pointer is in SLIM */ 1293 mb->un.varCfgPort.hps = 1; 1294 1295 /* If HBA supports SLI=3 ask for it */ 1296 1297 if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) { 1298 if (phba->cfg_enable_bg) 1299 mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */ 1300 mb->un.varCfgPort.cerbm = 1; /* Request HBQs */ 1301 mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */ 1302 mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count(); 1303 if (phba->max_vpi && phba->cfg_enable_npiv && 1304 phba->vpd.sli3Feat.cmv) { 1305 mb->un.varCfgPort.max_vpi = LPFC_MAX_VPI; 1306 mb->un.varCfgPort.cmv = 1; 1307 } else 1308 mb->un.varCfgPort.max_vpi = phba->max_vpi = 0; 1309 } else 1310 phba->sli_rev = LPFC_SLI_REV2; 1311 mb->un.varCfgPort.sli_mode = phba->sli_rev; 1312 1313 /* If this is an SLI3 port, configure async status notification. */ 1314 if (phba->sli_rev == LPFC_SLI_REV3) 1315 mb->un.varCfgPort.casabt = 1; 1316 1317 /* Now setup pcb */ 1318 phba->pcb->type = TYPE_NATIVE_SLI2; 1319 phba->pcb->feature = FEATURE_INITIAL_SLI2; 1320 1321 /* Setup Mailbox pointers */ 1322 phba->pcb->mailBoxSize = sizeof(MAILBOX_t) + MAILBOX_EXT_SIZE; 1323 offset = (uint8_t *)phba->mbox - (uint8_t *)phba->slim2p.virt; 1324 pdma_addr = phba->slim2p.phys + offset; 1325 phba->pcb->mbAddrHigh = putPaddrHigh(pdma_addr); 1326 phba->pcb->mbAddrLow = putPaddrLow(pdma_addr); 1327 1328 /* 1329 * Setup Host Group ring pointer. 1330 * 1331 * For efficiency reasons, the ring get/put pointers can be 1332 * placed in adapter memory (SLIM) rather than in host memory. 1333 * This allows firmware to avoid PCI reads/writes when updating 1334 * and checking pointers. 1335 * 1336 * The firmware recognizes the use of SLIM memory by comparing 1337 * the address of the get/put pointers structure with that of 1338 * the SLIM BAR (BAR0). 1339 * 1340 * Caution: be sure to use the PCI config space value of BAR0/BAR1 1341 * (the hardware's view of the base address), not the OS's 1342 * value of pci_resource_start() as the OS value may be a cookie 1343 * for ioremap/iomap. 1344 */ 1345 1346 1347 pci_read_config_dword(phba->pcidev, PCI_BASE_ADDRESS_0, &bar_low); 1348 pci_read_config_dword(phba->pcidev, PCI_BASE_ADDRESS_1, &bar_high); 1349 1350 /* 1351 * Set up HGP - Port Memory 1352 * 1353 * The port expects the host get/put pointers to reside in memory 1354 * following the "non-diagnostic" mode mailbox (32 words, 0x80 bytes) 1355 * area of SLIM. In SLI-2 mode, there's an additional 16 reserved 1356 * words (0x40 bytes). This area is not reserved if HBQs are 1357 * configured in SLI-3. 1358 * 1359 * CR0Put - SLI2(no HBQs) = 0xc0, With HBQs = 0x80 1360 * RR0Get 0xc4 0x84 1361 * CR1Put 0xc8 0x88 1362 * RR1Get 0xcc 0x8c 1363 * CR2Put 0xd0 0x90 1364 * RR2Get 0xd4 0x94 1365 * CR3Put 0xd8 0x98 1366 * RR3Get 0xdc 0x9c 1367 * 1368 * Reserved 0xa0-0xbf 1369 * If HBQs configured: 1370 * HBQ 0 Put ptr 0xc0 1371 * HBQ 1 Put ptr 0xc4 1372 * HBQ 2 Put ptr 0xc8 1373 * ...... 1374 * HBQ(M-1)Put Pointer 0xc0+(M-1)*4 1375 * 1376 */ 1377 1378 if (phba->cfg_hostmem_hgp && phba->sli_rev != 3) { 1379 phba->host_gp = (struct lpfc_hgp __iomem *) 1380 &phba->mbox->us.s2.host[0]; 1381 phba->hbq_put = NULL; 1382 offset = (uint8_t *)&phba->mbox->us.s2.host - 1383 (uint8_t *)phba->slim2p.virt; 1384 pdma_addr = phba->slim2p.phys + offset; 1385 phba->pcb->hgpAddrHigh = putPaddrHigh(pdma_addr); 1386 phba->pcb->hgpAddrLow = putPaddrLow(pdma_addr); 1387 } else { 1388 /* Always Host Group Pointer is in SLIM */ 1389 mb->un.varCfgPort.hps = 1; 1390 1391 if (phba->sli_rev == 3) { 1392 phba->host_gp = &mb_slim->us.s3.host[0]; 1393 phba->hbq_put = &mb_slim->us.s3.hbq_put[0]; 1394 } else { 1395 phba->host_gp = &mb_slim->us.s2.host[0]; 1396 phba->hbq_put = NULL; 1397 } 1398 1399 /* mask off BAR0's flag bits 0 - 3 */ 1400 phba->pcb->hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) + 1401 (void __iomem *)phba->host_gp - 1402 (void __iomem *)phba->MBslimaddr; 1403 if (bar_low & PCI_BASE_ADDRESS_MEM_TYPE_64) 1404 phba->pcb->hgpAddrHigh = bar_high; 1405 else 1406 phba->pcb->hgpAddrHigh = 0; 1407 /* write HGP data to SLIM at the required longword offset */ 1408 memset(&hgp, 0, sizeof(struct lpfc_hgp)); 1409 1410 for (i = 0; i < phba->sli.num_rings; i++) { 1411 lpfc_memcpy_to_slim(phba->host_gp + i, &hgp, 1412 sizeof(*phba->host_gp)); 1413 } 1414 } 1415 1416 /* Setup Port Group offset */ 1417 if (phba->sli_rev == 3) 1418 pgp_offset = offsetof(struct lpfc_sli2_slim, 1419 mbx.us.s3_pgp.port); 1420 else 1421 pgp_offset = offsetof(struct lpfc_sli2_slim, mbx.us.s2.port); 1422 pdma_addr = phba->slim2p.phys + pgp_offset; 1423 phba->pcb->pgpAddrHigh = putPaddrHigh(pdma_addr); 1424 phba->pcb->pgpAddrLow = putPaddrLow(pdma_addr); 1425 1426 /* Use callback routine to setp rings in the pcb */ 1427 lpfc_config_pcb_setup(phba); 1428 1429 /* special handling for LC HBAs */ 1430 if (lpfc_is_LC_HBA(phba->pcidev->device)) { 1431 uint32_t hbainit[5]; 1432 1433 lpfc_hba_init(phba, hbainit); 1434 1435 memcpy(&mb->un.varCfgPort.hbainit, hbainit, 20); 1436 } 1437 1438 /* Swap PCB if needed */ 1439 lpfc_sli_pcimem_bcopy(phba->pcb, phba->pcb, sizeof(PCB_t)); 1440 } 1441 1442 /** 1443 * lpfc_kill_board - Prepare a mailbox command for killing board 1444 * @phba: pointer to lpfc hba data structure. 1445 * @pmb: pointer to the driver internal queue element for mailbox command. 1446 * 1447 * The kill board mailbox command is used to tell firmware to perform a 1448 * graceful shutdown of a channel on a specified board to prepare for reset. 1449 * When the kill board mailbox command is received, the ER3 bit is set to 1 1450 * in the Host Status register and the ER Attention bit is set to 1 in the 1451 * Host Attention register of the HBA function that received the kill board 1452 * command. 1453 * 1454 * This routine prepares the mailbox command for killing the board in 1455 * preparation for a graceful shutdown. 1456 **/ 1457 void 1458 lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) 1459 { 1460 MAILBOX_t *mb = &pmb->u.mb; 1461 1462 memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); 1463 mb->mbxCommand = MBX_KILL_BOARD; 1464 mb->mbxOwner = OWN_HOST; 1465 return; 1466 } 1467 1468 /** 1469 * lpfc_mbox_put - Put a mailbox cmd into the tail of driver's mailbox queue 1470 * @phba: pointer to lpfc hba data structure. 1471 * @mbq: pointer to the driver internal queue element for mailbox command. 1472 * 1473 * Driver maintains a internal mailbox command queue implemented as a linked 1474 * list. When a mailbox command is issued, it shall be put into the mailbox 1475 * command queue such that they shall be processed orderly as HBA can process 1476 * one mailbox command at a time. 1477 **/ 1478 void 1479 lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) 1480 { 1481 struct lpfc_sli *psli; 1482 1483 psli = &phba->sli; 1484 1485 list_add_tail(&mbq->list, &psli->mboxq); 1486 1487 psli->mboxq_cnt++; 1488 1489 return; 1490 } 1491 1492 /** 1493 * lpfc_mbox_get - Remove a mailbox cmd from the head of driver's mailbox queue 1494 * @phba: pointer to lpfc hba data structure. 1495 * 1496 * Driver maintains a internal mailbox command queue implemented as a linked 1497 * list. When a mailbox command is issued, it shall be put into the mailbox 1498 * command queue such that they shall be processed orderly as HBA can process 1499 * one mailbox command at a time. After HBA finished processing a mailbox 1500 * command, the driver will remove a pending mailbox command from the head of 1501 * the mailbox command queue and send to the HBA for processing. 1502 * 1503 * Return codes 1504 * pointer to the driver internal queue element for mailbox command. 1505 **/ 1506 LPFC_MBOXQ_t * 1507 lpfc_mbox_get(struct lpfc_hba * phba) 1508 { 1509 LPFC_MBOXQ_t *mbq = NULL; 1510 struct lpfc_sli *psli = &phba->sli; 1511 1512 list_remove_head((&psli->mboxq), mbq, LPFC_MBOXQ_t, list); 1513 if (mbq) 1514 psli->mboxq_cnt--; 1515 1516 return mbq; 1517 } 1518 1519 /** 1520 * __lpfc_mbox_cmpl_put - Put mailbox cmd into mailbox cmd complete list 1521 * @phba: pointer to lpfc hba data structure. 1522 * @mbq: pointer to the driver internal queue element for mailbox command. 1523 * 1524 * This routine put the completed mailbox command into the mailbox command 1525 * complete list. This is the unlocked version of the routine. The mailbox 1526 * complete list is used by the driver worker thread to process mailbox 1527 * complete callback functions outside the driver interrupt handler. 1528 **/ 1529 void 1530 __lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq) 1531 { 1532 list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl); 1533 } 1534 1535 /** 1536 * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list 1537 * @phba: pointer to lpfc hba data structure. 1538 * @mbq: pointer to the driver internal queue element for mailbox command. 1539 * 1540 * This routine put the completed mailbox command into the mailbox command 1541 * complete list. This is the locked version of the routine. The mailbox 1542 * complete list is used by the driver worker thread to process mailbox 1543 * complete callback functions outside the driver interrupt handler. 1544 **/ 1545 void 1546 lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq) 1547 { 1548 unsigned long iflag; 1549 1550 /* This function expects to be called from interrupt context */ 1551 spin_lock_irqsave(&phba->hbalock, iflag); 1552 __lpfc_mbox_cmpl_put(phba, mbq); 1553 spin_unlock_irqrestore(&phba->hbalock, iflag); 1554 return; 1555 } 1556 1557 /** 1558 * lpfc_mbox_cmd_check - Check the validality of a mailbox command 1559 * @phba: pointer to lpfc hba data structure. 1560 * @mboxq: pointer to the driver internal queue element for mailbox command. 1561 * 1562 * This routine is to check whether a mailbox command is valid to be issued. 1563 * This check will be performed by both the mailbox issue API when a client 1564 * is to issue a mailbox command to the mailbox transport. 1565 * 1566 * Return 0 - pass the check, -ENODEV - fail the check 1567 **/ 1568 int 1569 lpfc_mbox_cmd_check(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 1570 { 1571 /* Mailbox command that have a completion handler must also have a 1572 * vport specified. 1573 */ 1574 if (mboxq->mbox_cmpl && mboxq->mbox_cmpl != lpfc_sli_def_mbox_cmpl && 1575 mboxq->mbox_cmpl != lpfc_sli_wake_mbox_wait) { 1576 if (!mboxq->vport) { 1577 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_VPORT, 1578 "1814 Mbox x%x failed, no vport\n", 1579 mboxq->u.mb.mbxCommand); 1580 dump_stack(); 1581 return -ENODEV; 1582 } 1583 } 1584 return 0; 1585 } 1586 1587 /** 1588 * lpfc_mbox_dev_check - Check the device state for issuing a mailbox command 1589 * @phba: pointer to lpfc hba data structure. 1590 * 1591 * This routine is to check whether the HBA device is ready for posting a 1592 * mailbox command. It is used by the mailbox transport API at the time the 1593 * to post a mailbox command to the device. 1594 * 1595 * Return 0 - pass the check, -ENODEV - fail the check 1596 **/ 1597 int 1598 lpfc_mbox_dev_check(struct lpfc_hba *phba) 1599 { 1600 /* If the PCI channel is in offline state, do not issue mbox */ 1601 if (unlikely(pci_channel_offline(phba->pcidev))) 1602 return -ENODEV; 1603 1604 /* If the HBA is in error state, do not issue mbox */ 1605 if (phba->link_state == LPFC_HBA_ERROR) 1606 return -ENODEV; 1607 1608 return 0; 1609 } 1610 1611 /** 1612 * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value 1613 * @phba: pointer to lpfc hba data structure. 1614 * @mboxq: pointer to the driver internal queue element for mailbox command. 1615 * 1616 * This routine retrieves the proper timeout value according to the mailbox 1617 * command code. 1618 * 1619 * Return codes 1620 * Timeout value to be used for the given mailbox command 1621 **/ 1622 int 1623 lpfc_mbox_tmo_val(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 1624 { 1625 MAILBOX_t *mbox = &mboxq->u.mb; 1626 uint8_t subsys, opcode; 1627 1628 switch (mbox->mbxCommand) { 1629 case MBX_WRITE_NV: /* 0x03 */ 1630 case MBX_DUMP_MEMORY: /* 0x17 */ 1631 case MBX_UPDATE_CFG: /* 0x1B */ 1632 case MBX_DOWN_LOAD: /* 0x1C */ 1633 case MBX_DEL_LD_ENTRY: /* 0x1D */ 1634 case MBX_WRITE_VPARMS: /* 0x32 */ 1635 case MBX_LOAD_AREA: /* 0x81 */ 1636 case MBX_WRITE_WWN: /* 0x98 */ 1637 case MBX_LOAD_EXP_ROM: /* 0x9C */ 1638 case MBX_ACCESS_VDATA: /* 0xA5 */ 1639 return LPFC_MBOX_TMO_FLASH_CMD; 1640 case MBX_SLI4_CONFIG: /* 0x9b */ 1641 subsys = lpfc_sli_config_mbox_subsys_get(phba, mboxq); 1642 opcode = lpfc_sli_config_mbox_opcode_get(phba, mboxq); 1643 if (subsys == LPFC_MBOX_SUBSYSTEM_COMMON) { 1644 switch (opcode) { 1645 case LPFC_MBOX_OPCODE_READ_OBJECT: 1646 case LPFC_MBOX_OPCODE_WRITE_OBJECT: 1647 case LPFC_MBOX_OPCODE_READ_OBJECT_LIST: 1648 case LPFC_MBOX_OPCODE_DELETE_OBJECT: 1649 case LPFC_MBOX_OPCODE_GET_PROFILE_LIST: 1650 case LPFC_MBOX_OPCODE_SET_ACT_PROFILE: 1651 case LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG: 1652 case LPFC_MBOX_OPCODE_SET_PROFILE_CONFIG: 1653 case LPFC_MBOX_OPCODE_GET_FACTORY_PROFILE_CONFIG: 1654 case LPFC_MBOX_OPCODE_GET_PROFILE_CAPACITIES: 1655 case LPFC_MBOX_OPCODE_SEND_ACTIVATION: 1656 case LPFC_MBOX_OPCODE_RESET_LICENSES: 1657 case LPFC_MBOX_OPCODE_SET_BOOT_CONFIG: 1658 case LPFC_MBOX_OPCODE_GET_VPD_DATA: 1659 case LPFC_MBOX_OPCODE_SET_PHYSICAL_LINK_CONFIG: 1660 return LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO; 1661 } 1662 } 1663 if (subsys == LPFC_MBOX_SUBSYSTEM_FCOE) { 1664 switch (opcode) { 1665 case LPFC_MBOX_OPCODE_FCOE_SET_FCLINK_SETTINGS: 1666 return LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO; 1667 } 1668 } 1669 return LPFC_MBOX_SLI4_CONFIG_TMO; 1670 } 1671 return LPFC_MBOX_TMO; 1672 } 1673 1674 /** 1675 * lpfc_sli4_mbx_sge_set - Set a sge entry in non-embedded mailbox command 1676 * @mbox: pointer to lpfc mbox command. 1677 * @sgentry: sge entry index. 1678 * @phyaddr: physical address for the sge 1679 * @length: Length of the sge. 1680 * 1681 * This routine sets up an entry in the non-embedded mailbox command at the sge 1682 * index location. 1683 **/ 1684 void 1685 lpfc_sli4_mbx_sge_set(struct lpfcMboxq *mbox, uint32_t sgentry, 1686 dma_addr_t phyaddr, uint32_t length) 1687 { 1688 struct lpfc_mbx_nembed_cmd *nembed_sge; 1689 1690 nembed_sge = (struct lpfc_mbx_nembed_cmd *) 1691 &mbox->u.mqe.un.nembed_cmd; 1692 nembed_sge->sge[sgentry].pa_lo = putPaddrLow(phyaddr); 1693 nembed_sge->sge[sgentry].pa_hi = putPaddrHigh(phyaddr); 1694 nembed_sge->sge[sgentry].length = length; 1695 } 1696 1697 /** 1698 * lpfc_sli4_mbx_sge_get - Get a sge entry from non-embedded mailbox command 1699 * @mbox: pointer to lpfc mbox command. 1700 * @sgentry: sge entry index. 1701 * @sge: pointer to lpfc mailbox sge to load into. 1702 * 1703 * This routine gets an entry from the non-embedded mailbox command at the sge 1704 * index location. 1705 **/ 1706 void 1707 lpfc_sli4_mbx_sge_get(struct lpfcMboxq *mbox, uint32_t sgentry, 1708 struct lpfc_mbx_sge *sge) 1709 { 1710 struct lpfc_mbx_nembed_cmd *nembed_sge; 1711 1712 nembed_sge = (struct lpfc_mbx_nembed_cmd *) 1713 &mbox->u.mqe.un.nembed_cmd; 1714 sge->pa_lo = nembed_sge->sge[sgentry].pa_lo; 1715 sge->pa_hi = nembed_sge->sge[sgentry].pa_hi; 1716 sge->length = nembed_sge->sge[sgentry].length; 1717 } 1718 1719 /** 1720 * lpfc_sli4_mbox_cmd_free - Free a sli4 mailbox command 1721 * @phba: pointer to lpfc hba data structure. 1722 * @mbox: pointer to lpfc mbox command. 1723 * 1724 * This routine frees SLI4 specific mailbox command for sending IOCTL command. 1725 **/ 1726 void 1727 lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox) 1728 { 1729 struct lpfc_mbx_sli4_config *sli4_cfg; 1730 struct lpfc_mbx_sge sge; 1731 dma_addr_t phyaddr; 1732 uint32_t sgecount, sgentry; 1733 1734 sli4_cfg = &mbox->u.mqe.un.sli4_config; 1735 1736 /* For embedded mbox command, just free the mbox command */ 1737 if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) { 1738 mempool_free(mbox, phba->mbox_mem_pool); 1739 return; 1740 } 1741 1742 /* For non-embedded mbox command, we need to free the pages first */ 1743 sgecount = bf_get(lpfc_mbox_hdr_sge_cnt, &sli4_cfg->header.cfg_mhdr); 1744 /* There is nothing we can do if there is no sge address array */ 1745 if (unlikely(!mbox->sge_array)) { 1746 mempool_free(mbox, phba->mbox_mem_pool); 1747 return; 1748 } 1749 /* Each non-embedded DMA memory was allocated in the length of a page */ 1750 for (sgentry = 0; sgentry < sgecount; sgentry++) { 1751 lpfc_sli4_mbx_sge_get(mbox, sgentry, &sge); 1752 phyaddr = getPaddr(sge.pa_hi, sge.pa_lo); 1753 dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE, 1754 mbox->sge_array->addr[sgentry], phyaddr); 1755 } 1756 /* Free the sge address array memory */ 1757 kfree(mbox->sge_array); 1758 /* Finally, free the mailbox command itself */ 1759 mempool_free(mbox, phba->mbox_mem_pool); 1760 } 1761 1762 /** 1763 * lpfc_sli4_config - Initialize the SLI4 Config Mailbox command 1764 * @phba: pointer to lpfc hba data structure. 1765 * @mbox: pointer to lpfc mbox command. 1766 * @subsystem: The sli4 config sub mailbox subsystem. 1767 * @opcode: The sli4 config sub mailbox command opcode. 1768 * @length: Length of the sli4 config mailbox command (including sub-header). 1769 * @emb: True if embedded mbox command should be setup. 1770 * 1771 * This routine sets up the header fields of SLI4 specific mailbox command 1772 * for sending IOCTL command. 1773 * 1774 * Return: the actual length of the mbox command allocated (mostly useful 1775 * for none embedded mailbox command). 1776 **/ 1777 int 1778 lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox, 1779 uint8_t subsystem, uint8_t opcode, uint32_t length, bool emb) 1780 { 1781 struct lpfc_mbx_sli4_config *sli4_config; 1782 union lpfc_sli4_cfg_shdr *cfg_shdr = NULL; 1783 uint32_t alloc_len; 1784 uint32_t resid_len; 1785 uint32_t pagen, pcount; 1786 void *viraddr; 1787 dma_addr_t phyaddr; 1788 1789 /* Set up SLI4 mailbox command header fields */ 1790 memset(mbox, 0, sizeof(*mbox)); 1791 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_SLI4_CONFIG); 1792 1793 /* Set up SLI4 ioctl command header fields */ 1794 sli4_config = &mbox->u.mqe.un.sli4_config; 1795 1796 /* Setup for the embedded mbox command */ 1797 if (emb) { 1798 /* Set up main header fields */ 1799 bf_set(lpfc_mbox_hdr_emb, &sli4_config->header.cfg_mhdr, 1); 1800 sli4_config->header.cfg_mhdr.payload_length = length; 1801 /* Set up sub-header fields following main header */ 1802 bf_set(lpfc_mbox_hdr_opcode, 1803 &sli4_config->header.cfg_shdr.request, opcode); 1804 bf_set(lpfc_mbox_hdr_subsystem, 1805 &sli4_config->header.cfg_shdr.request, subsystem); 1806 sli4_config->header.cfg_shdr.request.request_length = 1807 length - LPFC_MBX_CMD_HDR_LENGTH; 1808 return length; 1809 } 1810 1811 /* Setup for the non-embedded mbox command */ 1812 pcount = (SLI4_PAGE_ALIGN(length))/SLI4_PAGE_SIZE; 1813 pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ? 1814 LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount; 1815 /* Allocate record for keeping SGE virtual addresses */ 1816 mbox->sge_array = kzalloc(sizeof(struct lpfc_mbx_nembed_sge_virt), 1817 GFP_KERNEL); 1818 if (!mbox->sge_array) { 1819 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, 1820 "2527 Failed to allocate non-embedded SGE " 1821 "array.\n"); 1822 return 0; 1823 } 1824 for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) { 1825 /* The DMA memory is always allocated in the length of a 1826 * page even though the last SGE might not fill up to a 1827 * page, this is used as a priori size of SLI4_PAGE_SIZE for 1828 * the later DMA memory free. 1829 */ 1830 viraddr = dma_alloc_coherent(&phba->pcidev->dev, 1831 SLI4_PAGE_SIZE, &phyaddr, 1832 GFP_KERNEL); 1833 /* In case of malloc fails, proceed with whatever we have */ 1834 if (!viraddr) 1835 break; 1836 mbox->sge_array->addr[pagen] = viraddr; 1837 /* Keep the first page for later sub-header construction */ 1838 if (pagen == 0) 1839 cfg_shdr = (union lpfc_sli4_cfg_shdr *)viraddr; 1840 resid_len = length - alloc_len; 1841 if (resid_len > SLI4_PAGE_SIZE) { 1842 lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr, 1843 SLI4_PAGE_SIZE); 1844 alloc_len += SLI4_PAGE_SIZE; 1845 } else { 1846 lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr, 1847 resid_len); 1848 alloc_len = length; 1849 } 1850 } 1851 1852 /* Set up main header fields in mailbox command */ 1853 sli4_config->header.cfg_mhdr.payload_length = alloc_len; 1854 bf_set(lpfc_mbox_hdr_sge_cnt, &sli4_config->header.cfg_mhdr, pagen); 1855 1856 /* Set up sub-header fields into the first page */ 1857 if (pagen > 0) { 1858 bf_set(lpfc_mbox_hdr_opcode, &cfg_shdr->request, opcode); 1859 bf_set(lpfc_mbox_hdr_subsystem, &cfg_shdr->request, subsystem); 1860 cfg_shdr->request.request_length = 1861 alloc_len - sizeof(union lpfc_sli4_cfg_shdr); 1862 } 1863 /* The sub-header is in DMA memory, which needs endian converstion */ 1864 if (cfg_shdr) 1865 lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr, 1866 sizeof(union lpfc_sli4_cfg_shdr)); 1867 return alloc_len; 1868 } 1869 1870 /** 1871 * lpfc_sli4_mbox_rsrc_extent - Initialize the opcode resource extent. 1872 * @phba: pointer to lpfc hba data structure. 1873 * @mbox: pointer to an allocated lpfc mbox resource. 1874 * @exts_count: the number of extents, if required, to allocate. 1875 * @rsrc_type: the resource extent type. 1876 * @emb: true if LPFC_SLI4_MBX_EMBED. false if LPFC_SLI4_MBX_NEMBED. 1877 * 1878 * This routine completes the subcommand header for SLI4 resource extent 1879 * mailbox commands. It is called after lpfc_sli4_config. The caller must 1880 * pass an allocated mailbox and the attributes required to initialize the 1881 * mailbox correctly. 1882 * 1883 * Return: the actual length of the mbox command allocated. 1884 **/ 1885 int 1886 lpfc_sli4_mbox_rsrc_extent(struct lpfc_hba *phba, struct lpfcMboxq *mbox, 1887 uint16_t exts_count, uint16_t rsrc_type, bool emb) 1888 { 1889 uint8_t opcode = 0; 1890 struct lpfc_mbx_nembed_rsrc_extent *n_rsrc_extnt = NULL; 1891 void *virtaddr = NULL; 1892 1893 /* Set up SLI4 ioctl command header fields */ 1894 if (emb == LPFC_SLI4_MBX_NEMBED) { 1895 /* Get the first SGE entry from the non-embedded DMA memory */ 1896 virtaddr = mbox->sge_array->addr[0]; 1897 if (virtaddr == NULL) 1898 return 1; 1899 n_rsrc_extnt = (struct lpfc_mbx_nembed_rsrc_extent *) virtaddr; 1900 } 1901 1902 /* 1903 * The resource type is common to all extent Opcodes and resides in the 1904 * same position. 1905 */ 1906 if (emb == LPFC_SLI4_MBX_EMBED) 1907 bf_set(lpfc_mbx_alloc_rsrc_extents_type, 1908 &mbox->u.mqe.un.alloc_rsrc_extents.u.req, 1909 rsrc_type); 1910 else { 1911 /* This is DMA data. Byteswap is required. */ 1912 bf_set(lpfc_mbx_alloc_rsrc_extents_type, 1913 n_rsrc_extnt, rsrc_type); 1914 lpfc_sli_pcimem_bcopy(&n_rsrc_extnt->word4, 1915 &n_rsrc_extnt->word4, 1916 sizeof(uint32_t)); 1917 } 1918 1919 /* Complete the initialization for the particular Opcode. */ 1920 opcode = lpfc_sli_config_mbox_opcode_get(phba, mbox); 1921 switch (opcode) { 1922 case LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT: 1923 if (emb == LPFC_SLI4_MBX_EMBED) 1924 bf_set(lpfc_mbx_alloc_rsrc_extents_cnt, 1925 &mbox->u.mqe.un.alloc_rsrc_extents.u.req, 1926 exts_count); 1927 else 1928 bf_set(lpfc_mbx_alloc_rsrc_extents_cnt, 1929 n_rsrc_extnt, exts_count); 1930 break; 1931 case LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT: 1932 case LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO: 1933 case LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT: 1934 /* Initialization is complete.*/ 1935 break; 1936 default: 1937 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, 1938 "2929 Resource Extent Opcode x%x is " 1939 "unsupported\n", opcode); 1940 return 1; 1941 } 1942 1943 return 0; 1944 } 1945 1946 /** 1947 * lpfc_sli_config_mbox_subsys_get - Get subsystem from a sli_config mbox cmd 1948 * @phba: pointer to lpfc hba data structure. 1949 * @mbox: pointer to lpfc mbox command queue entry. 1950 * 1951 * This routine gets the subsystem from a SLI4 specific SLI_CONFIG mailbox 1952 * command. If the mailbox command is not MBX_SLI4_CONFIG (0x9B) or if the 1953 * sub-header is not present, subsystem LPFC_MBOX_SUBSYSTEM_NA (0x0) shall 1954 * be returned. 1955 **/ 1956 uint8_t 1957 lpfc_sli_config_mbox_subsys_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox) 1958 { 1959 struct lpfc_mbx_sli4_config *sli4_cfg; 1960 union lpfc_sli4_cfg_shdr *cfg_shdr; 1961 1962 if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG) 1963 return LPFC_MBOX_SUBSYSTEM_NA; 1964 sli4_cfg = &mbox->u.mqe.un.sli4_config; 1965 1966 /* For embedded mbox command, get opcode from embedded sub-header*/ 1967 if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) { 1968 cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr; 1969 return bf_get(lpfc_mbox_hdr_subsystem, &cfg_shdr->request); 1970 } 1971 1972 /* For non-embedded mbox command, get opcode from first dma page */ 1973 if (unlikely(!mbox->sge_array)) 1974 return LPFC_MBOX_SUBSYSTEM_NA; 1975 cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0]; 1976 return bf_get(lpfc_mbox_hdr_subsystem, &cfg_shdr->request); 1977 } 1978 1979 /** 1980 * lpfc_sli_config_mbox_opcode_get - Get opcode from a sli_config mbox cmd 1981 * @phba: pointer to lpfc hba data structure. 1982 * @mbox: pointer to lpfc mbox command queue entry. 1983 * 1984 * This routine gets the opcode from a SLI4 specific SLI_CONFIG mailbox 1985 * command. If the mailbox command is not MBX_SLI4_CONFIG (0x9B) or if 1986 * the sub-header is not present, opcode LPFC_MBOX_OPCODE_NA (0x0) be 1987 * returned. 1988 **/ 1989 uint8_t 1990 lpfc_sli_config_mbox_opcode_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox) 1991 { 1992 struct lpfc_mbx_sli4_config *sli4_cfg; 1993 union lpfc_sli4_cfg_shdr *cfg_shdr; 1994 1995 if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG) 1996 return LPFC_MBOX_OPCODE_NA; 1997 sli4_cfg = &mbox->u.mqe.un.sli4_config; 1998 1999 /* For embedded mbox command, get opcode from embedded sub-header*/ 2000 if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) { 2001 cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr; 2002 return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request); 2003 } 2004 2005 /* For non-embedded mbox command, get opcode from first dma page */ 2006 if (unlikely(!mbox->sge_array)) 2007 return LPFC_MBOX_OPCODE_NA; 2008 cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0]; 2009 return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request); 2010 } 2011 2012 /** 2013 * lpfc_sli4_mbx_read_fcf_rec - Allocate and construct read fcf mbox cmd 2014 * @phba: pointer to lpfc hba data structure. 2015 * @mboxq: pointer to lpfc mbox command. 2016 * @fcf_index: index to fcf table. 2017 * 2018 * This routine routine allocates and constructs non-embedded mailbox command 2019 * for reading a FCF table entry referred by @fcf_index. 2020 * 2021 * Return: pointer to the mailbox command constructed if successful, otherwise 2022 * NULL. 2023 **/ 2024 int 2025 lpfc_sli4_mbx_read_fcf_rec(struct lpfc_hba *phba, 2026 struct lpfcMboxq *mboxq, 2027 uint16_t fcf_index) 2028 { 2029 void *virt_addr; 2030 uint8_t *bytep; 2031 struct lpfc_mbx_sge sge; 2032 uint32_t alloc_len, req_len; 2033 struct lpfc_mbx_read_fcf_tbl *read_fcf; 2034 2035 if (!mboxq) 2036 return -ENOMEM; 2037 2038 req_len = sizeof(struct fcf_record) + 2039 sizeof(union lpfc_sli4_cfg_shdr) + 2 * sizeof(uint32_t); 2040 2041 /* Set up READ_FCF SLI4_CONFIG mailbox-ioctl command */ 2042 alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE, 2043 LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE, req_len, 2044 LPFC_SLI4_MBX_NEMBED); 2045 2046 if (alloc_len < req_len) { 2047 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, 2048 "0291 Allocated DMA memory size (x%x) is " 2049 "less than the requested DMA memory " 2050 "size (x%x)\n", alloc_len, req_len); 2051 return -ENOMEM; 2052 } 2053 2054 /* Get the first SGE entry from the non-embedded DMA memory. This 2055 * routine only uses a single SGE. 2056 */ 2057 lpfc_sli4_mbx_sge_get(mboxq, 0, &sge); 2058 virt_addr = mboxq->sge_array->addr[0]; 2059 read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr; 2060 2061 /* Set up command fields */ 2062 bf_set(lpfc_mbx_read_fcf_tbl_indx, &read_fcf->u.request, fcf_index); 2063 /* Perform necessary endian conversion */ 2064 bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr); 2065 lpfc_sli_pcimem_bcopy(bytep, bytep, sizeof(uint32_t)); 2066 2067 return 0; 2068 } 2069 2070 /** 2071 * lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox 2072 * @phba: pointer to lpfc hba data structure. 2073 * @mboxq: pointer to lpfc mbox command. 2074 * 2075 * This routine sets up the mailbox for an SLI4 REQUEST_FEATURES 2076 * mailbox command. 2077 **/ 2078 void 2079 lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq) 2080 { 2081 /* Set up SLI4 mailbox command header fields */ 2082 memset(mboxq, 0, sizeof(LPFC_MBOXQ_t)); 2083 bf_set(lpfc_mqe_command, &mboxq->u.mqe, MBX_SLI4_REQ_FTRS); 2084 2085 /* Set up host requested features. */ 2086 bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1); 2087 bf_set(lpfc_mbx_rq_ftr_rq_perfh, &mboxq->u.mqe.un.req_ftrs, 1); 2088 2089 /* Enable DIF (block guard) only if configured to do so. */ 2090 if (phba->cfg_enable_bg) 2091 bf_set(lpfc_mbx_rq_ftr_rq_dif, &mboxq->u.mqe.un.req_ftrs, 1); 2092 2093 /* Enable NPIV only if configured to do so. */ 2094 if (phba->max_vpi && phba->cfg_enable_npiv) 2095 bf_set(lpfc_mbx_rq_ftr_rq_npiv, &mboxq->u.mqe.un.req_ftrs, 1); 2096 2097 if (phba->nvmet_support) { 2098 bf_set(lpfc_mbx_rq_ftr_rq_mrqp, &mboxq->u.mqe.un.req_ftrs, 1); 2099 /* iaab/iaar NOT set for now */ 2100 bf_set(lpfc_mbx_rq_ftr_rq_iaab, &mboxq->u.mqe.un.req_ftrs, 0); 2101 bf_set(lpfc_mbx_rq_ftr_rq_iaar, &mboxq->u.mqe.un.req_ftrs, 0); 2102 } 2103 return; 2104 } 2105 2106 /** 2107 * lpfc_init_vfi - Initialize the INIT_VFI mailbox command 2108 * @mbox: pointer to lpfc mbox command to initialize. 2109 * @vport: Vport associated with the VF. 2110 * 2111 * This routine initializes @mbox to all zeros and then fills in the mailbox 2112 * fields from @vport. INIT_VFI configures virtual fabrics identified by VFI 2113 * in the context of an FCF. The driver issues this command to setup a VFI 2114 * before issuing a FLOGI to login to the VSAN. The driver should also issue a 2115 * REG_VFI after a successful VSAN login. 2116 **/ 2117 void 2118 lpfc_init_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport) 2119 { 2120 struct lpfc_mbx_init_vfi *init_vfi; 2121 2122 memset(mbox, 0, sizeof(*mbox)); 2123 mbox->vport = vport; 2124 init_vfi = &mbox->u.mqe.un.init_vfi; 2125 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VFI); 2126 bf_set(lpfc_init_vfi_vr, init_vfi, 1); 2127 bf_set(lpfc_init_vfi_vt, init_vfi, 1); 2128 bf_set(lpfc_init_vfi_vp, init_vfi, 1); 2129 bf_set(lpfc_init_vfi_vfi, init_vfi, 2130 vport->phba->sli4_hba.vfi_ids[vport->vfi]); 2131 bf_set(lpfc_init_vfi_vpi, init_vfi, 2132 vport->phba->vpi_ids[vport->vpi]); 2133 bf_set(lpfc_init_vfi_fcfi, init_vfi, 2134 vport->phba->fcf.fcfi); 2135 } 2136 2137 /** 2138 * lpfc_reg_vfi - Initialize the REG_VFI mailbox command 2139 * @mbox: pointer to lpfc mbox command to initialize. 2140 * @vport: vport associated with the VF. 2141 * @phys: BDE DMA bus address used to send the service parameters to the HBA. 2142 * 2143 * This routine initializes @mbox to all zeros and then fills in the mailbox 2144 * fields from @vport, and uses @buf as a DMAable buffer to send the vport's 2145 * fc service parameters to the HBA for this VFI. REG_VFI configures virtual 2146 * fabrics identified by VFI in the context of an FCF. 2147 **/ 2148 void 2149 lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys) 2150 { 2151 struct lpfc_mbx_reg_vfi *reg_vfi; 2152 struct lpfc_hba *phba = vport->phba; 2153 uint8_t bbscn_fabric = 0, bbscn_max = 0, bbscn_def = 0; 2154 2155 memset(mbox, 0, sizeof(*mbox)); 2156 reg_vfi = &mbox->u.mqe.un.reg_vfi; 2157 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_VFI); 2158 bf_set(lpfc_reg_vfi_vp, reg_vfi, 1); 2159 bf_set(lpfc_reg_vfi_vfi, reg_vfi, 2160 phba->sli4_hba.vfi_ids[vport->vfi]); 2161 bf_set(lpfc_reg_vfi_fcfi, reg_vfi, phba->fcf.fcfi); 2162 bf_set(lpfc_reg_vfi_vpi, reg_vfi, phba->vpi_ids[vport->vpi]); 2163 memcpy(reg_vfi->wwn, &vport->fc_portname, sizeof(struct lpfc_name)); 2164 reg_vfi->wwn[0] = cpu_to_le32(reg_vfi->wwn[0]); 2165 reg_vfi->wwn[1] = cpu_to_le32(reg_vfi->wwn[1]); 2166 reg_vfi->e_d_tov = phba->fc_edtov; 2167 reg_vfi->r_a_tov = phba->fc_ratov; 2168 if (phys) { 2169 reg_vfi->bde.addrHigh = putPaddrHigh(phys); 2170 reg_vfi->bde.addrLow = putPaddrLow(phys); 2171 reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam); 2172 reg_vfi->bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64; 2173 } 2174 bf_set(lpfc_reg_vfi_nport_id, reg_vfi, vport->fc_myDID); 2175 2176 /* Only FC supports upd bit */ 2177 if ((phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC) && 2178 (vport->fc_flag & FC_VFI_REGISTERED) && 2179 (!phba->fc_topology_changed)) 2180 bf_set(lpfc_reg_vfi_upd, reg_vfi, 1); 2181 2182 bf_set(lpfc_reg_vfi_bbcr, reg_vfi, 0); 2183 bf_set(lpfc_reg_vfi_bbscn, reg_vfi, 0); 2184 bbscn_fabric = (phba->fc_fabparam.cmn.bbRcvSizeMsb >> 4) & 0xF; 2185 2186 if (phba->bbcredit_support && phba->cfg_enable_bbcr && 2187 bbscn_fabric != 0) { 2188 bbscn_max = bf_get(lpfc_bbscn_max, 2189 &phba->sli4_hba.bbscn_params); 2190 if (bbscn_fabric <= bbscn_max) { 2191 bbscn_def = bf_get(lpfc_bbscn_def, 2192 &phba->sli4_hba.bbscn_params); 2193 2194 if (bbscn_fabric > bbscn_def) 2195 bf_set(lpfc_reg_vfi_bbscn, reg_vfi, 2196 bbscn_fabric); 2197 else 2198 bf_set(lpfc_reg_vfi_bbscn, reg_vfi, bbscn_def); 2199 2200 bf_set(lpfc_reg_vfi_bbcr, reg_vfi, 1); 2201 } 2202 } 2203 lpfc_printf_vlog(vport, KERN_INFO, LOG_MBOX, 2204 "3134 Register VFI, mydid:x%x, fcfi:%d, " 2205 " vfi:%d, vpi:%d, fc_pname:%x%x fc_flag:x%x" 2206 " port_state:x%x topology chg:%d bbscn_fabric :%d\n", 2207 vport->fc_myDID, 2208 phba->fcf.fcfi, 2209 phba->sli4_hba.vfi_ids[vport->vfi], 2210 phba->vpi_ids[vport->vpi], 2211 reg_vfi->wwn[0], reg_vfi->wwn[1], vport->fc_flag, 2212 vport->port_state, phba->fc_topology_changed, 2213 bbscn_fabric); 2214 } 2215 2216 /** 2217 * lpfc_init_vpi - Initialize the INIT_VPI mailbox command 2218 * @phba: pointer to the hba structure to init the VPI for. 2219 * @mbox: pointer to lpfc mbox command to initialize. 2220 * @vpi: VPI to be initialized. 2221 * 2222 * The INIT_VPI mailbox command supports virtual N_Ports. The driver uses the 2223 * command to activate a virtual N_Port. The HBA assigns a MAC address to use 2224 * with the virtual N Port. The SLI Host issues this command before issuing a 2225 * FDISC to connect to the Fabric. The SLI Host should issue a REG_VPI after a 2226 * successful virtual NPort login. 2227 **/ 2228 void 2229 lpfc_init_vpi(struct lpfc_hba *phba, struct lpfcMboxq *mbox, uint16_t vpi) 2230 { 2231 memset(mbox, 0, sizeof(*mbox)); 2232 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VPI); 2233 bf_set(lpfc_init_vpi_vpi, &mbox->u.mqe.un.init_vpi, 2234 phba->vpi_ids[vpi]); 2235 bf_set(lpfc_init_vpi_vfi, &mbox->u.mqe.un.init_vpi, 2236 phba->sli4_hba.vfi_ids[phba->pport->vfi]); 2237 } 2238 2239 /** 2240 * lpfc_unreg_vfi - Initialize the UNREG_VFI mailbox command 2241 * @mbox: pointer to lpfc mbox command to initialize. 2242 * @vport: vport associated with the VF. 2243 * 2244 * The UNREG_VFI mailbox command causes the SLI Host to put a virtual fabric 2245 * (logical NPort) into the inactive state. The SLI Host must have logged out 2246 * and unregistered all remote N_Ports to abort any activity on the virtual 2247 * fabric. The SLI Port posts the mailbox response after marking the virtual 2248 * fabric inactive. 2249 **/ 2250 void 2251 lpfc_unreg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport) 2252 { 2253 memset(mbox, 0, sizeof(*mbox)); 2254 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI); 2255 bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, 2256 vport->phba->sli4_hba.vfi_ids[vport->vfi]); 2257 } 2258 2259 /** 2260 * lpfc_sli4_dump_cfg_rg23 - Dump sli4 port config region 23 2261 * @phba: pointer to the hba structure containing. 2262 * @mbox: pointer to lpfc mbox command to initialize. 2263 * 2264 * This function create a SLI4 dump mailbox command to dump configure 2265 * region 23. 2266 **/ 2267 int 2268 lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox) 2269 { 2270 struct lpfc_dmabuf *mp = NULL; 2271 MAILBOX_t *mb; 2272 2273 memset(mbox, 0, sizeof(*mbox)); 2274 mb = &mbox->u.mb; 2275 2276 mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); 2277 if (mp) 2278 mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); 2279 2280 if (!mp || !mp->virt) { 2281 kfree(mp); 2282 /* dump config region 23 failed to allocate memory */ 2283 lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, 2284 "2569 lpfc dump config region 23: memory" 2285 " allocation failed\n"); 2286 return 1; 2287 } 2288 2289 memset(mp->virt, 0, LPFC_BPL_SIZE); 2290 INIT_LIST_HEAD(&mp->list); 2291 2292 /* save address for completion */ 2293 mbox->ctx_buf = (uint8_t *)mp; 2294 2295 mb->mbxCommand = MBX_DUMP_MEMORY; 2296 mb->un.varDmp.type = DMP_NV_PARAMS; 2297 mb->un.varDmp.region_id = DMP_REGION_23; 2298 mb->un.varDmp.sli4_length = DMP_RGN23_SIZE; 2299 mb->un.varWords[3] = putPaddrLow(mp->phys); 2300 mb->un.varWords[4] = putPaddrHigh(mp->phys); 2301 return 0; 2302 } 2303 2304 static void 2305 lpfc_mbx_cmpl_rdp_link_stat(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 2306 { 2307 MAILBOX_t *mb; 2308 int rc = FAILURE; 2309 struct lpfc_rdp_context *rdp_context = 2310 (struct lpfc_rdp_context *)(mboxq->ctx_ndlp); 2311 2312 mb = &mboxq->u.mb; 2313 if (mb->mbxStatus) 2314 goto mbx_failed; 2315 2316 memcpy(&rdp_context->link_stat, &mb->un.varRdLnk, sizeof(READ_LNK_VAR)); 2317 2318 rc = SUCCESS; 2319 2320 mbx_failed: 2321 lpfc_sli4_mbox_cmd_free(phba, mboxq); 2322 rdp_context->cmpl(phba, rdp_context, rc); 2323 } 2324 2325 static void 2326 lpfc_mbx_cmpl_rdp_page_a2(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox) 2327 { 2328 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *)mbox->ctx_buf; 2329 struct lpfc_rdp_context *rdp_context = 2330 (struct lpfc_rdp_context *)(mbox->ctx_ndlp); 2331 2332 if (bf_get(lpfc_mqe_status, &mbox->u.mqe)) 2333 goto error_mbuf_free; 2334 2335 lpfc_sli_bemem_bcopy(mp->virt, &rdp_context->page_a2, 2336 DMP_SFF_PAGE_A2_SIZE); 2337 2338 /* We don't need dma buffer for link stat. */ 2339 lpfc_mbuf_free(phba, mp->virt, mp->phys); 2340 kfree(mp); 2341 2342 memset(mbox, 0, sizeof(*mbox)); 2343 lpfc_read_lnk_stat(phba, mbox); 2344 mbox->vport = rdp_context->ndlp->vport; 2345 mbox->mbox_cmpl = lpfc_mbx_cmpl_rdp_link_stat; 2346 mbox->ctx_ndlp = (struct lpfc_rdp_context *)rdp_context; 2347 if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) == MBX_NOT_FINISHED) 2348 goto error_cmd_free; 2349 2350 return; 2351 2352 error_mbuf_free: 2353 lpfc_mbuf_free(phba, mp->virt, mp->phys); 2354 kfree(mp); 2355 error_cmd_free: 2356 lpfc_sli4_mbox_cmd_free(phba, mbox); 2357 rdp_context->cmpl(phba, rdp_context, FAILURE); 2358 } 2359 2360 void 2361 lpfc_mbx_cmpl_rdp_page_a0(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox) 2362 { 2363 int rc; 2364 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *)(mbox->ctx_buf); 2365 struct lpfc_rdp_context *rdp_context = 2366 (struct lpfc_rdp_context *)(mbox->ctx_ndlp); 2367 2368 if (bf_get(lpfc_mqe_status, &mbox->u.mqe)) 2369 goto error; 2370 2371 lpfc_sli_bemem_bcopy(mp->virt, &rdp_context->page_a0, 2372 DMP_SFF_PAGE_A0_SIZE); 2373 2374 memset(mbox, 0, sizeof(*mbox)); 2375 2376 memset(mp->virt, 0, DMP_SFF_PAGE_A2_SIZE); 2377 INIT_LIST_HEAD(&mp->list); 2378 2379 /* save address for completion */ 2380 mbox->ctx_buf = mp; 2381 mbox->vport = rdp_context->ndlp->vport; 2382 2383 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_DUMP_MEMORY); 2384 bf_set(lpfc_mbx_memory_dump_type3_type, 2385 &mbox->u.mqe.un.mem_dump_type3, DMP_LMSD); 2386 bf_set(lpfc_mbx_memory_dump_type3_link, 2387 &mbox->u.mqe.un.mem_dump_type3, phba->sli4_hba.physical_port); 2388 bf_set(lpfc_mbx_memory_dump_type3_page_no, 2389 &mbox->u.mqe.un.mem_dump_type3, DMP_PAGE_A2); 2390 bf_set(lpfc_mbx_memory_dump_type3_length, 2391 &mbox->u.mqe.un.mem_dump_type3, DMP_SFF_PAGE_A2_SIZE); 2392 mbox->u.mqe.un.mem_dump_type3.addr_lo = putPaddrLow(mp->phys); 2393 mbox->u.mqe.un.mem_dump_type3.addr_hi = putPaddrHigh(mp->phys); 2394 2395 mbox->mbox_cmpl = lpfc_mbx_cmpl_rdp_page_a2; 2396 mbox->ctx_ndlp = (struct lpfc_rdp_context *)rdp_context; 2397 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); 2398 if (rc == MBX_NOT_FINISHED) 2399 goto error; 2400 2401 return; 2402 2403 error: 2404 lpfc_mbuf_free(phba, mp->virt, mp->phys); 2405 kfree(mp); 2406 lpfc_sli4_mbox_cmd_free(phba, mbox); 2407 rdp_context->cmpl(phba, rdp_context, FAILURE); 2408 } 2409 2410 2411 /* 2412 * lpfc_sli4_dump_page_a0 - Dump sli4 read SFP Diagnostic. 2413 * @phba: pointer to the hba structure containing. 2414 * @mbox: pointer to lpfc mbox command to initialize. 2415 * 2416 * This function create a SLI4 dump mailbox command to dump configure 2417 * type 3 page 0xA0. 2418 */ 2419 int 2420 lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox) 2421 { 2422 struct lpfc_dmabuf *mp = NULL; 2423 2424 memset(mbox, 0, sizeof(*mbox)); 2425 2426 mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); 2427 if (mp) 2428 mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); 2429 if (!mp || !mp->virt) { 2430 kfree(mp); 2431 lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, 2432 "3569 dump type 3 page 0xA0 allocation failed\n"); 2433 return 1; 2434 } 2435 2436 memset(mp->virt, 0, LPFC_BPL_SIZE); 2437 INIT_LIST_HEAD(&mp->list); 2438 2439 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_DUMP_MEMORY); 2440 /* save address for completion */ 2441 mbox->ctx_buf = mp; 2442 2443 bf_set(lpfc_mbx_memory_dump_type3_type, 2444 &mbox->u.mqe.un.mem_dump_type3, DMP_LMSD); 2445 bf_set(lpfc_mbx_memory_dump_type3_link, 2446 &mbox->u.mqe.un.mem_dump_type3, phba->sli4_hba.physical_port); 2447 bf_set(lpfc_mbx_memory_dump_type3_page_no, 2448 &mbox->u.mqe.un.mem_dump_type3, DMP_PAGE_A0); 2449 bf_set(lpfc_mbx_memory_dump_type3_length, 2450 &mbox->u.mqe.un.mem_dump_type3, DMP_SFF_PAGE_A0_SIZE); 2451 mbox->u.mqe.un.mem_dump_type3.addr_lo = putPaddrLow(mp->phys); 2452 mbox->u.mqe.un.mem_dump_type3.addr_hi = putPaddrHigh(mp->phys); 2453 2454 return 0; 2455 } 2456 2457 /** 2458 * lpfc_reg_fcfi - Initialize the REG_FCFI mailbox command 2459 * @phba: pointer to the hba structure containing the FCF index and RQ ID. 2460 * @mbox: pointer to lpfc mbox command to initialize. 2461 * 2462 * The REG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). The 2463 * SLI Host uses the command to activate an FCF after it has acquired FCF 2464 * information via a READ_FCF mailbox command. This mailbox command also is used 2465 * to indicate where received unsolicited frames from this FCF will be sent. By 2466 * default this routine will set up the FCF to forward all unsolicited frames 2467 * the the RQ ID passed in the @phba. This can be overridden by the caller for 2468 * more complicated setups. 2469 **/ 2470 void 2471 lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox) 2472 { 2473 struct lpfc_mbx_reg_fcfi *reg_fcfi; 2474 2475 memset(mbox, 0, sizeof(*mbox)); 2476 reg_fcfi = &mbox->u.mqe.un.reg_fcfi; 2477 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_FCFI); 2478 if (phba->nvmet_support == 0) { 2479 bf_set(lpfc_reg_fcfi_rq_id0, reg_fcfi, 2480 phba->sli4_hba.hdr_rq->queue_id); 2481 /* Match everything - rq_id0 */ 2482 bf_set(lpfc_reg_fcfi_type_match0, reg_fcfi, 0); 2483 bf_set(lpfc_reg_fcfi_type_mask0, reg_fcfi, 0); 2484 bf_set(lpfc_reg_fcfi_rctl_match0, reg_fcfi, 0); 2485 bf_set(lpfc_reg_fcfi_rctl_mask0, reg_fcfi, 0); 2486 2487 bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID); 2488 2489 /* addr mode is bit wise inverted value of fcf addr_mode */ 2490 bf_set(lpfc_reg_fcfi_mam, reg_fcfi, 2491 (~phba->fcf.addr_mode) & 0x3); 2492 } else { 2493 /* This is ONLY for NVMET MRQ == 1 */ 2494 if (phba->cfg_nvmet_mrq != 1) 2495 return; 2496 2497 bf_set(lpfc_reg_fcfi_rq_id0, reg_fcfi, 2498 phba->sli4_hba.nvmet_mrq_hdr[0]->queue_id); 2499 /* Match type FCP - rq_id0 */ 2500 bf_set(lpfc_reg_fcfi_type_match0, reg_fcfi, FC_TYPE_FCP); 2501 bf_set(lpfc_reg_fcfi_type_mask0, reg_fcfi, 0xff); 2502 bf_set(lpfc_reg_fcfi_rctl_match0, reg_fcfi, 2503 FC_RCTL_DD_UNSOL_CMD); 2504 2505 bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, 2506 phba->sli4_hba.hdr_rq->queue_id); 2507 /* Match everything else - rq_id1 */ 2508 bf_set(lpfc_reg_fcfi_type_match1, reg_fcfi, 0); 2509 bf_set(lpfc_reg_fcfi_type_mask1, reg_fcfi, 0); 2510 bf_set(lpfc_reg_fcfi_rctl_match1, reg_fcfi, 0); 2511 bf_set(lpfc_reg_fcfi_rctl_mask1, reg_fcfi, 0); 2512 } 2513 bf_set(lpfc_reg_fcfi_rq_id2, reg_fcfi, REG_FCF_INVALID_QID); 2514 bf_set(lpfc_reg_fcfi_rq_id3, reg_fcfi, REG_FCF_INVALID_QID); 2515 bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, 2516 phba->fcf.current_rec.fcf_indx); 2517 if (phba->fcf.current_rec.vlan_id != LPFC_FCOE_NULL_VID) { 2518 bf_set(lpfc_reg_fcfi_vv, reg_fcfi, 1); 2519 bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, 2520 phba->fcf.current_rec.vlan_id); 2521 } 2522 } 2523 2524 /** 2525 * lpfc_reg_fcfi_mrq - Initialize the REG_FCFI_MRQ mailbox command 2526 * @phba: pointer to the hba structure containing the FCF index and RQ ID. 2527 * @mbox: pointer to lpfc mbox command to initialize. 2528 * @mode: 0 to register FCFI, 1 to register MRQs 2529 * 2530 * The REG_FCFI_MRQ mailbox command supports Fibre Channel Forwarders (FCFs). 2531 * The SLI Host uses the command to activate an FCF after it has acquired FCF 2532 * information via a READ_FCF mailbox command. This mailbox command also is used 2533 * to indicate where received unsolicited frames from this FCF will be sent. By 2534 * default this routine will set up the FCF to forward all unsolicited frames 2535 * the the RQ ID passed in the @phba. This can be overridden by the caller for 2536 * more complicated setups. 2537 **/ 2538 void 2539 lpfc_reg_fcfi_mrq(struct lpfc_hba *phba, struct lpfcMboxq *mbox, int mode) 2540 { 2541 struct lpfc_mbx_reg_fcfi_mrq *reg_fcfi; 2542 2543 /* This is ONLY for MRQ */ 2544 if (phba->cfg_nvmet_mrq <= 1) 2545 return; 2546 2547 memset(mbox, 0, sizeof(*mbox)); 2548 reg_fcfi = &mbox->u.mqe.un.reg_fcfi_mrq; 2549 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_FCFI_MRQ); 2550 if (mode == 0) { 2551 bf_set(lpfc_reg_fcfi_mrq_info_index, reg_fcfi, 2552 phba->fcf.current_rec.fcf_indx); 2553 if (phba->fcf.current_rec.vlan_id != LPFC_FCOE_NULL_VID) { 2554 bf_set(lpfc_reg_fcfi_mrq_vv, reg_fcfi, 1); 2555 bf_set(lpfc_reg_fcfi_mrq_vlan_tag, reg_fcfi, 2556 phba->fcf.current_rec.vlan_id); 2557 } 2558 return; 2559 } 2560 2561 bf_set(lpfc_reg_fcfi_mrq_rq_id0, reg_fcfi, 2562 phba->sli4_hba.nvmet_mrq_hdr[0]->queue_id); 2563 /* Match NVME frames of type FCP (protocol NVME) - rq_id0 */ 2564 bf_set(lpfc_reg_fcfi_mrq_type_match0, reg_fcfi, FC_TYPE_FCP); 2565 bf_set(lpfc_reg_fcfi_mrq_type_mask0, reg_fcfi, 0xff); 2566 bf_set(lpfc_reg_fcfi_mrq_rctl_match0, reg_fcfi, FC_RCTL_DD_UNSOL_CMD); 2567 bf_set(lpfc_reg_fcfi_mrq_rctl_mask0, reg_fcfi, 0xff); 2568 bf_set(lpfc_reg_fcfi_mrq_ptc0, reg_fcfi, 1); 2569 bf_set(lpfc_reg_fcfi_mrq_pt0, reg_fcfi, 1); 2570 2571 bf_set(lpfc_reg_fcfi_mrq_policy, reg_fcfi, 3); /* NVME connection id */ 2572 bf_set(lpfc_reg_fcfi_mrq_mode, reg_fcfi, 1); 2573 bf_set(lpfc_reg_fcfi_mrq_filter, reg_fcfi, 1); /* rq_id0 */ 2574 bf_set(lpfc_reg_fcfi_mrq_npairs, reg_fcfi, phba->cfg_nvmet_mrq); 2575 2576 bf_set(lpfc_reg_fcfi_mrq_rq_id1, reg_fcfi, 2577 phba->sli4_hba.hdr_rq->queue_id); 2578 /* Match everything - rq_id1 */ 2579 bf_set(lpfc_reg_fcfi_mrq_type_match1, reg_fcfi, 0); 2580 bf_set(lpfc_reg_fcfi_mrq_type_mask1, reg_fcfi, 0); 2581 bf_set(lpfc_reg_fcfi_mrq_rctl_match1, reg_fcfi, 0); 2582 bf_set(lpfc_reg_fcfi_mrq_rctl_mask1, reg_fcfi, 0); 2583 2584 bf_set(lpfc_reg_fcfi_mrq_rq_id2, reg_fcfi, REG_FCF_INVALID_QID); 2585 bf_set(lpfc_reg_fcfi_mrq_rq_id3, reg_fcfi, REG_FCF_INVALID_QID); 2586 } 2587 2588 /** 2589 * lpfc_unreg_fcfi - Initialize the UNREG_FCFI mailbox command 2590 * @mbox: pointer to lpfc mbox command to initialize. 2591 * @fcfi: FCFI to be unregistered. 2592 * 2593 * The UNREG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). 2594 * The SLI Host uses the command to inactivate an FCFI. 2595 **/ 2596 void 2597 lpfc_unreg_fcfi(struct lpfcMboxq *mbox, uint16_t fcfi) 2598 { 2599 memset(mbox, 0, sizeof(*mbox)); 2600 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_FCFI); 2601 bf_set(lpfc_unreg_fcfi, &mbox->u.mqe.un.unreg_fcfi, fcfi); 2602 } 2603 2604 /** 2605 * lpfc_resume_rpi - Initialize the RESUME_RPI mailbox command 2606 * @mbox: pointer to lpfc mbox command to initialize. 2607 * @ndlp: The nodelist structure that describes the RPI to resume. 2608 * 2609 * The RESUME_RPI mailbox command is used to restart I/O to an RPI after a 2610 * link event. 2611 **/ 2612 void 2613 lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp) 2614 { 2615 struct lpfc_hba *phba = ndlp->phba; 2616 struct lpfc_mbx_resume_rpi *resume_rpi; 2617 2618 memset(mbox, 0, sizeof(*mbox)); 2619 resume_rpi = &mbox->u.mqe.un.resume_rpi; 2620 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI); 2621 bf_set(lpfc_resume_rpi_index, resume_rpi, 2622 phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); 2623 bf_set(lpfc_resume_rpi_ii, resume_rpi, RESUME_INDEX_RPI); 2624 resume_rpi->event_tag = ndlp->phba->fc_eventTag; 2625 } 2626 2627 /** 2628 * lpfc_supported_pages - Initialize the PORT_CAPABILITIES supported pages 2629 * mailbox command. 2630 * @mbox: pointer to lpfc mbox command to initialize. 2631 * 2632 * The PORT_CAPABILITIES supported pages mailbox command is issued to 2633 * retrieve the particular feature pages supported by the port. 2634 **/ 2635 void 2636 lpfc_supported_pages(struct lpfcMboxq *mbox) 2637 { 2638 struct lpfc_mbx_supp_pages *supp_pages; 2639 2640 memset(mbox, 0, sizeof(*mbox)); 2641 supp_pages = &mbox->u.mqe.un.supp_pages; 2642 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES); 2643 bf_set(cpn, supp_pages, LPFC_SUPP_PAGES); 2644 } 2645 2646 /** 2647 * lpfc_pc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params mbox cmd. 2648 * @mbox: pointer to lpfc mbox command to initialize. 2649 * 2650 * The PORT_CAPABILITIES SLI4 parameters mailbox command is issued to 2651 * retrieve the particular SLI4 features supported by the port. 2652 **/ 2653 void 2654 lpfc_pc_sli4_params(struct lpfcMboxq *mbox) 2655 { 2656 struct lpfc_mbx_pc_sli4_params *sli4_params; 2657 2658 memset(mbox, 0, sizeof(*mbox)); 2659 sli4_params = &mbox->u.mqe.un.sli4_params; 2660 bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES); 2661 bf_set(cpn, sli4_params, LPFC_SLI4_PARAMETERS); 2662 } 2663