1 /******************************************************************* 2 * This file is part of the Emulex Linux Device Driver for * 3 * Fibre Channel Host Bus Adapters. * 4 * Copyright (C) 2004-2012 Emulex. All rights reserved. * 5 * EMULEX and SLI are trademarks of Emulex. * 6 * www.emulex.com * 7 * Portions Copyright (C) 2004-2005 Christoph Hellwig * 8 * * 9 * This program is free software; you can redistribute it and/or * 10 * modify it under the terms of version 2 of the GNU General * 11 * Public License as published by the Free Software Foundation. * 12 * This program is distributed in the hope that it will be useful. * 13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * 14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * 15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * 16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * 17 * TO BE LEGALLY INVALID. See the GNU General Public License for * 18 * more details, a copy of which can be found in the file COPYING * 19 * included with this package. * 20 *******************************************************************/ 21 22 #include <linux/blkdev.h> 23 #include <linux/delay.h> 24 #include <linux/slab.h> 25 #include <linux/pci.h> 26 #include <linux/kthread.h> 27 #include <linux/interrupt.h> 28 29 #include <scsi/scsi.h> 30 #include <scsi/scsi_device.h> 31 #include <scsi/scsi_host.h> 32 #include <scsi/scsi_transport_fc.h> 33 34 #include "lpfc_hw4.h" 35 #include "lpfc_hw.h" 36 #include "lpfc_nl.h" 37 #include "lpfc_disc.h" 38 #include "lpfc_sli.h" 39 #include "lpfc_sli4.h" 40 #include "lpfc_scsi.h" 41 #include "lpfc.h" 42 #include "lpfc_logmsg.h" 43 #include "lpfc_crtn.h" 44 #include "lpfc_vport.h" 45 #include "lpfc_debugfs.h" 46 47 /* AlpaArray for assignment of scsid for scan-down and bind_method */ 48 static uint8_t lpfcAlpaArray[] = { 49 0xEF, 0xE8, 0xE4, 0xE2, 0xE1, 0xE0, 0xDC, 0xDA, 0xD9, 0xD6, 50 0xD5, 0xD4, 0xD3, 0xD2, 0xD1, 0xCE, 0xCD, 0xCC, 0xCB, 0xCA, 51 0xC9, 0xC7, 0xC6, 0xC5, 0xC3, 0xBC, 0xBA, 0xB9, 0xB6, 0xB5, 52 0xB4, 0xB3, 0xB2, 0xB1, 0xAE, 0xAD, 0xAC, 0xAB, 0xAA, 0xA9, 53 0xA7, 0xA6, 0xA5, 0xA3, 0x9F, 0x9E, 0x9D, 0x9B, 0x98, 0x97, 54 0x90, 0x8F, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7C, 0x7A, 0x79, 55 0x76, 0x75, 0x74, 0x73, 0x72, 0x71, 0x6E, 0x6D, 0x6C, 0x6B, 56 0x6A, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5C, 0x5A, 0x59, 0x56, 57 0x55, 0x54, 0x53, 0x52, 0x51, 0x4E, 0x4D, 0x4C, 0x4B, 0x4A, 58 0x49, 0x47, 0x46, 0x45, 0x43, 0x3C, 0x3A, 0x39, 0x36, 0x35, 59 0x34, 0x33, 0x32, 0x31, 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29, 60 0x27, 0x26, 0x25, 0x23, 0x1F, 0x1E, 0x1D, 0x1B, 0x18, 0x17, 61 0x10, 0x0F, 0x08, 0x04, 0x02, 0x01 62 }; 63 64 static void lpfc_disc_timeout_handler(struct lpfc_vport *); 65 static void lpfc_disc_flush_list(struct lpfc_vport *vport); 66 static void lpfc_unregister_fcfi_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *); 67 static int lpfc_fcf_inuse(struct lpfc_hba *); 68 69 void 70 lpfc_terminate_rport_io(struct fc_rport *rport) 71 { 72 struct lpfc_rport_data *rdata; 73 struct lpfc_nodelist * ndlp; 74 struct lpfc_hba *phba; 75 76 rdata = rport->dd_data; 77 ndlp = rdata->pnode; 78 79 if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { 80 if (rport->roles & FC_RPORT_ROLE_FCP_TARGET) 81 printk(KERN_ERR "Cannot find remote node" 82 " to terminate I/O Data x%x\n", 83 rport->port_id); 84 return; 85 } 86 87 phba = ndlp->phba; 88 89 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT, 90 "rport terminate: sid:x%x did:x%x flg:x%x", 91 ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag); 92 93 if (ndlp->nlp_sid != NLP_NO_SID) { 94 lpfc_sli_abort_iocb(ndlp->vport, 95 &phba->sli.ring[phba->sli.fcp_ring], 96 ndlp->nlp_sid, 0, LPFC_CTX_TGT); 97 } 98 } 99 100 /* 101 * This function will be called when dev_loss_tmo fire. 102 */ 103 void 104 lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) 105 { 106 struct lpfc_rport_data *rdata; 107 struct lpfc_nodelist * ndlp; 108 struct lpfc_vport *vport; 109 struct lpfc_hba *phba; 110 struct lpfc_work_evt *evtp; 111 int put_node; 112 int put_rport; 113 114 rdata = rport->dd_data; 115 ndlp = rdata->pnode; 116 if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) 117 return; 118 119 vport = ndlp->vport; 120 phba = vport->phba; 121 122 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, 123 "rport devlosscb: sid:x%x did:x%x flg:x%x", 124 ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag); 125 126 /* Don't defer this if we are in the process of deleting the vport 127 * or unloading the driver. The unload will cleanup the node 128 * appropriately we just need to cleanup the ndlp rport info here. 129 */ 130 if (vport->load_flag & FC_UNLOADING) { 131 put_node = rdata->pnode != NULL; 132 put_rport = ndlp->rport != NULL; 133 rdata->pnode = NULL; 134 ndlp->rport = NULL; 135 if (put_node) 136 lpfc_nlp_put(ndlp); 137 if (put_rport) 138 put_device(&rport->dev); 139 return; 140 } 141 142 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) 143 return; 144 145 evtp = &ndlp->dev_loss_evt; 146 147 if (!list_empty(&evtp->evt_listp)) 148 return; 149 150 spin_lock_irq(&phba->hbalock); 151 /* We need to hold the node by incrementing the reference 152 * count until this queued work is done 153 */ 154 evtp->evt_arg1 = lpfc_nlp_get(ndlp); 155 if (evtp->evt_arg1) { 156 evtp->evt = LPFC_EVT_DEV_LOSS; 157 list_add_tail(&evtp->evt_listp, &phba->work_list); 158 lpfc_worker_wake_up(phba); 159 } 160 spin_unlock_irq(&phba->hbalock); 161 162 return; 163 } 164 165 /** 166 * lpfc_dev_loss_tmo_handler - Remote node devloss timeout handler 167 * @ndlp: Pointer to remote node object. 168 * 169 * This function is called from the worker thread when devloss timeout timer 170 * expires. For SLI4 host, this routine shall return 1 when at lease one 171 * remote node, including this @ndlp, is still in use of FCF; otherwise, this 172 * routine shall return 0 when there is no remote node is still in use of FCF 173 * when devloss timeout happened to this @ndlp. 174 **/ 175 static int 176 lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) 177 { 178 struct lpfc_rport_data *rdata; 179 struct fc_rport *rport; 180 struct lpfc_vport *vport; 181 struct lpfc_hba *phba; 182 uint8_t *name; 183 int put_node; 184 int put_rport; 185 int warn_on = 0; 186 int fcf_inuse = 0; 187 188 rport = ndlp->rport; 189 190 if (!rport) 191 return fcf_inuse; 192 193 rdata = rport->dd_data; 194 name = (uint8_t *) &ndlp->nlp_portname; 195 vport = ndlp->vport; 196 phba = vport->phba; 197 198 if (phba->sli_rev == LPFC_SLI_REV4) 199 fcf_inuse = lpfc_fcf_inuse(phba); 200 201 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, 202 "rport devlosstmo:did:x%x type:x%x id:x%x", 203 ndlp->nlp_DID, ndlp->nlp_type, rport->scsi_target_id); 204 205 /* Don't defer this if we are in the process of deleting the vport 206 * or unloading the driver. The unload will cleanup the node 207 * appropriately we just need to cleanup the ndlp rport info here. 208 */ 209 if (vport->load_flag & FC_UNLOADING) { 210 if (ndlp->nlp_sid != NLP_NO_SID) { 211 /* flush the target */ 212 lpfc_sli_abort_iocb(vport, 213 &phba->sli.ring[phba->sli.fcp_ring], 214 ndlp->nlp_sid, 0, LPFC_CTX_TGT); 215 } 216 put_node = rdata->pnode != NULL; 217 put_rport = ndlp->rport != NULL; 218 rdata->pnode = NULL; 219 ndlp->rport = NULL; 220 if (put_node) 221 lpfc_nlp_put(ndlp); 222 if (put_rport) 223 put_device(&rport->dev); 224 return fcf_inuse; 225 } 226 227 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) { 228 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, 229 "0284 Devloss timeout Ignored on " 230 "WWPN %x:%x:%x:%x:%x:%x:%x:%x " 231 "NPort x%x\n", 232 *name, *(name+1), *(name+2), *(name+3), 233 *(name+4), *(name+5), *(name+6), *(name+7), 234 ndlp->nlp_DID); 235 return fcf_inuse; 236 } 237 238 if (ndlp->nlp_type & NLP_FABRIC) { 239 /* We will clean up these Nodes in linkup */ 240 put_node = rdata->pnode != NULL; 241 put_rport = ndlp->rport != NULL; 242 rdata->pnode = NULL; 243 ndlp->rport = NULL; 244 if (put_node) 245 lpfc_nlp_put(ndlp); 246 if (put_rport) 247 put_device(&rport->dev); 248 return fcf_inuse; 249 } 250 251 if (ndlp->nlp_sid != NLP_NO_SID) { 252 warn_on = 1; 253 /* flush the target */ 254 lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring], 255 ndlp->nlp_sid, 0, LPFC_CTX_TGT); 256 } 257 258 if (warn_on) { 259 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, 260 "0203 Devloss timeout on " 261 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x " 262 "NPort x%06x Data: x%x x%x x%x\n", 263 *name, *(name+1), *(name+2), *(name+3), 264 *(name+4), *(name+5), *(name+6), *(name+7), 265 ndlp->nlp_DID, ndlp->nlp_flag, 266 ndlp->nlp_state, ndlp->nlp_rpi); 267 } else { 268 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, 269 "0204 Devloss timeout on " 270 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x " 271 "NPort x%06x Data: x%x x%x x%x\n", 272 *name, *(name+1), *(name+2), *(name+3), 273 *(name+4), *(name+5), *(name+6), *(name+7), 274 ndlp->nlp_DID, ndlp->nlp_flag, 275 ndlp->nlp_state, ndlp->nlp_rpi); 276 } 277 278 put_node = rdata->pnode != NULL; 279 put_rport = ndlp->rport != NULL; 280 rdata->pnode = NULL; 281 ndlp->rport = NULL; 282 if (put_node) 283 lpfc_nlp_put(ndlp); 284 if (put_rport) 285 put_device(&rport->dev); 286 287 if (!(vport->load_flag & FC_UNLOADING) && 288 !(ndlp->nlp_flag & NLP_DELAY_TMO) && 289 !(ndlp->nlp_flag & NLP_NPR_2B_DISC) && 290 (ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) && 291 (ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) && 292 (ndlp->nlp_state != NLP_STE_PRLI_ISSUE)) 293 lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM); 294 295 return fcf_inuse; 296 } 297 298 /** 299 * lpfc_sli4_post_dev_loss_tmo_handler - SLI4 post devloss timeout handler 300 * @phba: Pointer to hba context object. 301 * @fcf_inuse: SLI4 FCF in-use state reported from devloss timeout handler. 302 * @nlp_did: remote node identifer with devloss timeout. 303 * 304 * This function is called from the worker thread after invoking devloss 305 * timeout handler and releasing the reference count for the ndlp with 306 * which the devloss timeout was handled for SLI4 host. For the devloss 307 * timeout of the last remote node which had been in use of FCF, when this 308 * routine is invoked, it shall be guaranteed that none of the remote are 309 * in-use of FCF. When devloss timeout to the last remote using the FCF, 310 * if the FIP engine is neither in FCF table scan process nor roundrobin 311 * failover process, the in-use FCF shall be unregistered. If the FIP 312 * engine is in FCF discovery process, the devloss timeout state shall 313 * be set for either the FCF table scan process or roundrobin failover 314 * process to unregister the in-use FCF. 315 **/ 316 static void 317 lpfc_sli4_post_dev_loss_tmo_handler(struct lpfc_hba *phba, int fcf_inuse, 318 uint32_t nlp_did) 319 { 320 /* If devloss timeout happened to a remote node when FCF had no 321 * longer been in-use, do nothing. 322 */ 323 if (!fcf_inuse) 324 return; 325 326 if ((phba->hba_flag & HBA_FIP_SUPPORT) && !lpfc_fcf_inuse(phba)) { 327 spin_lock_irq(&phba->hbalock); 328 if (phba->fcf.fcf_flag & FCF_DISCOVERY) { 329 if (phba->hba_flag & HBA_DEVLOSS_TMO) { 330 spin_unlock_irq(&phba->hbalock); 331 return; 332 } 333 phba->hba_flag |= HBA_DEVLOSS_TMO; 334 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 335 "2847 Last remote node (x%x) using " 336 "FCF devloss tmo\n", nlp_did); 337 } 338 if (phba->fcf.fcf_flag & FCF_REDISC_PROG) { 339 spin_unlock_irq(&phba->hbalock); 340 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 341 "2868 Devloss tmo to FCF rediscovery " 342 "in progress\n"); 343 return; 344 } 345 if (!(phba->hba_flag & (FCF_TS_INPROG | FCF_RR_INPROG))) { 346 spin_unlock_irq(&phba->hbalock); 347 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 348 "2869 Devloss tmo to idle FIP engine, " 349 "unreg in-use FCF and rescan.\n"); 350 /* Unregister in-use FCF and rescan */ 351 lpfc_unregister_fcf_rescan(phba); 352 return; 353 } 354 spin_unlock_irq(&phba->hbalock); 355 if (phba->hba_flag & FCF_TS_INPROG) 356 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 357 "2870 FCF table scan in progress\n"); 358 if (phba->hba_flag & FCF_RR_INPROG) 359 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 360 "2871 FLOGI roundrobin FCF failover " 361 "in progress\n"); 362 } 363 lpfc_unregister_unused_fcf(phba); 364 } 365 366 /** 367 * lpfc_alloc_fast_evt - Allocates data structure for posting event 368 * @phba: Pointer to hba context object. 369 * 370 * This function is called from the functions which need to post 371 * events from interrupt context. This function allocates data 372 * structure required for posting event. It also keeps track of 373 * number of events pending and prevent event storm when there are 374 * too many events. 375 **/ 376 struct lpfc_fast_path_event * 377 lpfc_alloc_fast_evt(struct lpfc_hba *phba) { 378 struct lpfc_fast_path_event *ret; 379 380 /* If there are lot of fast event do not exhaust memory due to this */ 381 if (atomic_read(&phba->fast_event_count) > LPFC_MAX_EVT_COUNT) 382 return NULL; 383 384 ret = kzalloc(sizeof(struct lpfc_fast_path_event), 385 GFP_ATOMIC); 386 if (ret) { 387 atomic_inc(&phba->fast_event_count); 388 INIT_LIST_HEAD(&ret->work_evt.evt_listp); 389 ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT; 390 } 391 return ret; 392 } 393 394 /** 395 * lpfc_free_fast_evt - Frees event data structure 396 * @phba: Pointer to hba context object. 397 * @evt: Event object which need to be freed. 398 * 399 * This function frees the data structure required for posting 400 * events. 401 **/ 402 void 403 lpfc_free_fast_evt(struct lpfc_hba *phba, 404 struct lpfc_fast_path_event *evt) { 405 406 atomic_dec(&phba->fast_event_count); 407 kfree(evt); 408 } 409 410 /** 411 * lpfc_send_fastpath_evt - Posts events generated from fast path 412 * @phba: Pointer to hba context object. 413 * @evtp: Event data structure. 414 * 415 * This function is called from worker thread, when the interrupt 416 * context need to post an event. This function posts the event 417 * to fc transport netlink interface. 418 **/ 419 static void 420 lpfc_send_fastpath_evt(struct lpfc_hba *phba, 421 struct lpfc_work_evt *evtp) 422 { 423 unsigned long evt_category, evt_sub_category; 424 struct lpfc_fast_path_event *fast_evt_data; 425 char *evt_data; 426 uint32_t evt_data_size; 427 struct Scsi_Host *shost; 428 429 fast_evt_data = container_of(evtp, struct lpfc_fast_path_event, 430 work_evt); 431 432 evt_category = (unsigned long) fast_evt_data->un.fabric_evt.event_type; 433 evt_sub_category = (unsigned long) fast_evt_data->un. 434 fabric_evt.subcategory; 435 shost = lpfc_shost_from_vport(fast_evt_data->vport); 436 if (evt_category == FC_REG_FABRIC_EVENT) { 437 if (evt_sub_category == LPFC_EVENT_FCPRDCHKERR) { 438 evt_data = (char *) &fast_evt_data->un.read_check_error; 439 evt_data_size = sizeof(fast_evt_data->un. 440 read_check_error); 441 } else if ((evt_sub_category == LPFC_EVENT_FABRIC_BUSY) || 442 (evt_sub_category == LPFC_EVENT_PORT_BUSY)) { 443 evt_data = (char *) &fast_evt_data->un.fabric_evt; 444 evt_data_size = sizeof(fast_evt_data->un.fabric_evt); 445 } else { 446 lpfc_free_fast_evt(phba, fast_evt_data); 447 return; 448 } 449 } else if (evt_category == FC_REG_SCSI_EVENT) { 450 switch (evt_sub_category) { 451 case LPFC_EVENT_QFULL: 452 case LPFC_EVENT_DEVBSY: 453 evt_data = (char *) &fast_evt_data->un.scsi_evt; 454 evt_data_size = sizeof(fast_evt_data->un.scsi_evt); 455 break; 456 case LPFC_EVENT_CHECK_COND: 457 evt_data = (char *) &fast_evt_data->un.check_cond_evt; 458 evt_data_size = sizeof(fast_evt_data->un. 459 check_cond_evt); 460 break; 461 case LPFC_EVENT_VARQUEDEPTH: 462 evt_data = (char *) &fast_evt_data->un.queue_depth_evt; 463 evt_data_size = sizeof(fast_evt_data->un. 464 queue_depth_evt); 465 break; 466 default: 467 lpfc_free_fast_evt(phba, fast_evt_data); 468 return; 469 } 470 } else { 471 lpfc_free_fast_evt(phba, fast_evt_data); 472 return; 473 } 474 475 fc_host_post_vendor_event(shost, 476 fc_get_event_number(), 477 evt_data_size, 478 evt_data, 479 LPFC_NL_VENDOR_ID); 480 481 lpfc_free_fast_evt(phba, fast_evt_data); 482 return; 483 } 484 485 static void 486 lpfc_work_list_done(struct lpfc_hba *phba) 487 { 488 struct lpfc_work_evt *evtp = NULL; 489 struct lpfc_nodelist *ndlp; 490 int free_evt; 491 int fcf_inuse; 492 uint32_t nlp_did; 493 494 spin_lock_irq(&phba->hbalock); 495 while (!list_empty(&phba->work_list)) { 496 list_remove_head((&phba->work_list), evtp, typeof(*evtp), 497 evt_listp); 498 spin_unlock_irq(&phba->hbalock); 499 free_evt = 1; 500 switch (evtp->evt) { 501 case LPFC_EVT_ELS_RETRY: 502 ndlp = (struct lpfc_nodelist *) (evtp->evt_arg1); 503 lpfc_els_retry_delay_handler(ndlp); 504 free_evt = 0; /* evt is part of ndlp */ 505 /* decrement the node reference count held 506 * for this queued work 507 */ 508 lpfc_nlp_put(ndlp); 509 break; 510 case LPFC_EVT_DEV_LOSS: 511 ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1); 512 fcf_inuse = lpfc_dev_loss_tmo_handler(ndlp); 513 free_evt = 0; 514 /* decrement the node reference count held for 515 * this queued work 516 */ 517 nlp_did = ndlp->nlp_DID; 518 lpfc_nlp_put(ndlp); 519 if (phba->sli_rev == LPFC_SLI_REV4) 520 lpfc_sli4_post_dev_loss_tmo_handler(phba, 521 fcf_inuse, 522 nlp_did); 523 break; 524 case LPFC_EVT_ONLINE: 525 if (phba->link_state < LPFC_LINK_DOWN) 526 *(int *) (evtp->evt_arg1) = lpfc_online(phba); 527 else 528 *(int *) (evtp->evt_arg1) = 0; 529 complete((struct completion *)(evtp->evt_arg2)); 530 break; 531 case LPFC_EVT_OFFLINE_PREP: 532 if (phba->link_state >= LPFC_LINK_DOWN) 533 lpfc_offline_prep(phba); 534 *(int *)(evtp->evt_arg1) = 0; 535 complete((struct completion *)(evtp->evt_arg2)); 536 break; 537 case LPFC_EVT_OFFLINE: 538 lpfc_offline(phba); 539 lpfc_sli_brdrestart(phba); 540 *(int *)(evtp->evt_arg1) = 541 lpfc_sli_brdready(phba, HS_FFRDY | HS_MBRDY); 542 lpfc_unblock_mgmt_io(phba); 543 complete((struct completion *)(evtp->evt_arg2)); 544 break; 545 case LPFC_EVT_WARM_START: 546 lpfc_offline(phba); 547 lpfc_reset_barrier(phba); 548 lpfc_sli_brdreset(phba); 549 lpfc_hba_down_post(phba); 550 *(int *)(evtp->evt_arg1) = 551 lpfc_sli_brdready(phba, HS_MBRDY); 552 lpfc_unblock_mgmt_io(phba); 553 complete((struct completion *)(evtp->evt_arg2)); 554 break; 555 case LPFC_EVT_KILL: 556 lpfc_offline(phba); 557 *(int *)(evtp->evt_arg1) 558 = (phba->pport->stopped) 559 ? 0 : lpfc_sli_brdkill(phba); 560 lpfc_unblock_mgmt_io(phba); 561 complete((struct completion *)(evtp->evt_arg2)); 562 break; 563 case LPFC_EVT_FASTPATH_MGMT_EVT: 564 lpfc_send_fastpath_evt(phba, evtp); 565 free_evt = 0; 566 break; 567 case LPFC_EVT_RESET_HBA: 568 if (!(phba->pport->load_flag & FC_UNLOADING)) 569 lpfc_reset_hba(phba); 570 break; 571 } 572 if (free_evt) 573 kfree(evtp); 574 spin_lock_irq(&phba->hbalock); 575 } 576 spin_unlock_irq(&phba->hbalock); 577 578 } 579 580 static void 581 lpfc_work_done(struct lpfc_hba *phba) 582 { 583 struct lpfc_sli_ring *pring; 584 uint32_t ha_copy, status, control, work_port_events; 585 struct lpfc_vport **vports; 586 struct lpfc_vport *vport; 587 int i; 588 589 spin_lock_irq(&phba->hbalock); 590 ha_copy = phba->work_ha; 591 phba->work_ha = 0; 592 spin_unlock_irq(&phba->hbalock); 593 594 /* First, try to post the next mailbox command to SLI4 device */ 595 if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) 596 lpfc_sli4_post_async_mbox(phba); 597 598 if (ha_copy & HA_ERATT) 599 /* Handle the error attention event */ 600 lpfc_handle_eratt(phba); 601 602 if (ha_copy & HA_MBATT) 603 lpfc_sli_handle_mb_event(phba); 604 605 if (ha_copy & HA_LATT) 606 lpfc_handle_latt(phba); 607 608 /* Process SLI4 events */ 609 if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) { 610 if (phba->hba_flag & HBA_RRQ_ACTIVE) 611 lpfc_handle_rrq_active(phba); 612 if (phba->hba_flag & FCP_XRI_ABORT_EVENT) 613 lpfc_sli4_fcp_xri_abort_event_proc(phba); 614 if (phba->hba_flag & ELS_XRI_ABORT_EVENT) 615 lpfc_sli4_els_xri_abort_event_proc(phba); 616 if (phba->hba_flag & ASYNC_EVENT) 617 lpfc_sli4_async_event_proc(phba); 618 if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) { 619 spin_lock_irq(&phba->hbalock); 620 phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER; 621 spin_unlock_irq(&phba->hbalock); 622 lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ); 623 } 624 if (phba->fcf.fcf_flag & FCF_REDISC_EVT) 625 lpfc_sli4_fcf_redisc_event_proc(phba); 626 } 627 628 vports = lpfc_create_vport_work_array(phba); 629 if (vports != NULL) 630 for (i = 0; i <= phba->max_vports; i++) { 631 /* 632 * We could have no vports in array if unloading, so if 633 * this happens then just use the pport 634 */ 635 if (vports[i] == NULL && i == 0) 636 vport = phba->pport; 637 else 638 vport = vports[i]; 639 if (vport == NULL) 640 break; 641 spin_lock_irq(&vport->work_port_lock); 642 work_port_events = vport->work_port_events; 643 vport->work_port_events &= ~work_port_events; 644 spin_unlock_irq(&vport->work_port_lock); 645 if (work_port_events & WORKER_DISC_TMO) 646 lpfc_disc_timeout_handler(vport); 647 if (work_port_events & WORKER_ELS_TMO) 648 lpfc_els_timeout_handler(vport); 649 if (work_port_events & WORKER_HB_TMO) 650 lpfc_hb_timeout_handler(phba); 651 if (work_port_events & WORKER_MBOX_TMO) 652 lpfc_mbox_timeout_handler(phba); 653 if (work_port_events & WORKER_FABRIC_BLOCK_TMO) 654 lpfc_unblock_fabric_iocbs(phba); 655 if (work_port_events & WORKER_FDMI_TMO) 656 lpfc_fdmi_timeout_handler(vport); 657 if (work_port_events & WORKER_RAMP_DOWN_QUEUE) 658 lpfc_ramp_down_queue_handler(phba); 659 if (work_port_events & WORKER_RAMP_UP_QUEUE) 660 lpfc_ramp_up_queue_handler(phba); 661 if (work_port_events & WORKER_DELAYED_DISC_TMO) 662 lpfc_delayed_disc_timeout_handler(vport); 663 } 664 lpfc_destroy_vport_work_array(phba, vports); 665 666 pring = &phba->sli.ring[LPFC_ELS_RING]; 667 status = (ha_copy & (HA_RXMASK << (4*LPFC_ELS_RING))); 668 status >>= (4*LPFC_ELS_RING); 669 if ((status & HA_RXMASK) || 670 (pring->flag & LPFC_DEFERRED_RING_EVENT) || 671 (phba->hba_flag & HBA_SP_QUEUE_EVT)) { 672 if (pring->flag & LPFC_STOP_IOCB_EVENT) { 673 pring->flag |= LPFC_DEFERRED_RING_EVENT; 674 /* Set the lpfc data pending flag */ 675 set_bit(LPFC_DATA_READY, &phba->data_flags); 676 } else { 677 pring->flag &= ~LPFC_DEFERRED_RING_EVENT; 678 lpfc_sli_handle_slow_ring_event(phba, pring, 679 (status & 680 HA_RXMASK)); 681 } 682 if ((phba->sli_rev == LPFC_SLI_REV4) && pring->txq_cnt) 683 lpfc_drain_txq(phba); 684 /* 685 * Turn on Ring interrupts 686 */ 687 if (phba->sli_rev <= LPFC_SLI_REV3) { 688 spin_lock_irq(&phba->hbalock); 689 control = readl(phba->HCregaddr); 690 if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) { 691 lpfc_debugfs_slow_ring_trc(phba, 692 "WRK Enable ring: cntl:x%x hacopy:x%x", 693 control, ha_copy, 0); 694 695 control |= (HC_R0INT_ENA << LPFC_ELS_RING); 696 writel(control, phba->HCregaddr); 697 readl(phba->HCregaddr); /* flush */ 698 } else { 699 lpfc_debugfs_slow_ring_trc(phba, 700 "WRK Ring ok: cntl:x%x hacopy:x%x", 701 control, ha_copy, 0); 702 } 703 spin_unlock_irq(&phba->hbalock); 704 } 705 } 706 lpfc_work_list_done(phba); 707 } 708 709 int 710 lpfc_do_work(void *p) 711 { 712 struct lpfc_hba *phba = p; 713 int rc; 714 715 set_user_nice(current, -20); 716 phba->data_flags = 0; 717 718 while (!kthread_should_stop()) { 719 /* wait and check worker queue activities */ 720 rc = wait_event_interruptible(phba->work_waitq, 721 (test_and_clear_bit(LPFC_DATA_READY, 722 &phba->data_flags) 723 || kthread_should_stop())); 724 /* Signal wakeup shall terminate the worker thread */ 725 if (rc) { 726 lpfc_printf_log(phba, KERN_ERR, LOG_ELS, 727 "0433 Wakeup on signal: rc=x%x\n", rc); 728 break; 729 } 730 731 /* Attend pending lpfc data processing */ 732 lpfc_work_done(phba); 733 } 734 phba->worker_thread = NULL; 735 lpfc_printf_log(phba, KERN_INFO, LOG_ELS, 736 "0432 Worker thread stopped.\n"); 737 return 0; 738 } 739 740 /* 741 * This is only called to handle FC worker events. Since this a rare 742 * occurrence, we allocate a struct lpfc_work_evt structure here instead of 743 * embedding it in the IOCB. 744 */ 745 int 746 lpfc_workq_post_event(struct lpfc_hba *phba, void *arg1, void *arg2, 747 uint32_t evt) 748 { 749 struct lpfc_work_evt *evtp; 750 unsigned long flags; 751 752 /* 753 * All Mailbox completions and LPFC_ELS_RING rcv ring IOCB events will 754 * be queued to worker thread for processing 755 */ 756 evtp = kmalloc(sizeof(struct lpfc_work_evt), GFP_ATOMIC); 757 if (!evtp) 758 return 0; 759 760 evtp->evt_arg1 = arg1; 761 evtp->evt_arg2 = arg2; 762 evtp->evt = evt; 763 764 spin_lock_irqsave(&phba->hbalock, flags); 765 list_add_tail(&evtp->evt_listp, &phba->work_list); 766 spin_unlock_irqrestore(&phba->hbalock, flags); 767 768 lpfc_worker_wake_up(phba); 769 770 return 1; 771 } 772 773 void 774 lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove) 775 { 776 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 777 struct lpfc_hba *phba = vport->phba; 778 struct lpfc_nodelist *ndlp, *next_ndlp; 779 int rc; 780 781 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { 782 if (!NLP_CHK_NODE_ACT(ndlp)) 783 continue; 784 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) 785 continue; 786 if ((phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) || 787 ((vport->port_type == LPFC_NPIV_PORT) && 788 (ndlp->nlp_DID == NameServer_DID))) 789 lpfc_unreg_rpi(vport, ndlp); 790 791 /* Leave Fabric nodes alone on link down */ 792 if ((phba->sli_rev < LPFC_SLI_REV4) && 793 (!remove && ndlp->nlp_type & NLP_FABRIC)) 794 continue; 795 rc = lpfc_disc_state_machine(vport, ndlp, NULL, 796 remove 797 ? NLP_EVT_DEVICE_RM 798 : NLP_EVT_DEVICE_RECOVERY); 799 } 800 if (phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) { 801 if (phba->sli_rev == LPFC_SLI_REV4) 802 lpfc_sli4_unreg_all_rpis(vport); 803 lpfc_mbx_unreg_vpi(vport); 804 spin_lock_irq(shost->host_lock); 805 vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; 806 spin_unlock_irq(shost->host_lock); 807 } 808 } 809 810 void 811 lpfc_port_link_failure(struct lpfc_vport *vport) 812 { 813 lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); 814 815 /* Cleanup any outstanding received buffers */ 816 lpfc_cleanup_rcv_buffers(vport); 817 818 /* Cleanup any outstanding RSCN activity */ 819 lpfc_els_flush_rscn(vport); 820 821 /* Cleanup any outstanding ELS commands */ 822 lpfc_els_flush_cmd(vport); 823 824 lpfc_cleanup_rpis(vport, 0); 825 826 /* Turn off discovery timer if its running */ 827 lpfc_can_disctmo(vport); 828 } 829 830 void 831 lpfc_linkdown_port(struct lpfc_vport *vport) 832 { 833 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 834 835 fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKDOWN, 0); 836 837 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, 838 "Link Down: state:x%x rtry:x%x flg:x%x", 839 vport->port_state, vport->fc_ns_retry, vport->fc_flag); 840 841 lpfc_port_link_failure(vport); 842 843 /* Stop delayed Nport discovery */ 844 spin_lock_irq(shost->host_lock); 845 vport->fc_flag &= ~FC_DISC_DELAYED; 846 spin_unlock_irq(shost->host_lock); 847 del_timer_sync(&vport->delayed_disc_tmo); 848 } 849 850 int 851 lpfc_linkdown(struct lpfc_hba *phba) 852 { 853 struct lpfc_vport *vport = phba->pport; 854 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 855 struct lpfc_vport **vports; 856 LPFC_MBOXQ_t *mb; 857 int i; 858 859 if (phba->link_state == LPFC_LINK_DOWN) 860 return 0; 861 862 /* Block all SCSI stack I/Os */ 863 lpfc_scsi_dev_block(phba); 864 865 spin_lock_irq(&phba->hbalock); 866 phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE); 867 spin_unlock_irq(&phba->hbalock); 868 if (phba->link_state > LPFC_LINK_DOWN) { 869 phba->link_state = LPFC_LINK_DOWN; 870 spin_lock_irq(shost->host_lock); 871 phba->pport->fc_flag &= ~FC_LBIT; 872 spin_unlock_irq(shost->host_lock); 873 } 874 vports = lpfc_create_vport_work_array(phba); 875 if (vports != NULL) 876 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { 877 /* Issue a LINK DOWN event to all nodes */ 878 lpfc_linkdown_port(vports[i]); 879 } 880 lpfc_destroy_vport_work_array(phba, vports); 881 /* Clean up any firmware default rpi's */ 882 mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 883 if (mb) { 884 lpfc_unreg_did(phba, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS, mb); 885 mb->vport = vport; 886 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; 887 if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) 888 == MBX_NOT_FINISHED) { 889 mempool_free(mb, phba->mbox_mem_pool); 890 } 891 } 892 893 /* Setup myDID for link up if we are in pt2pt mode */ 894 if (phba->pport->fc_flag & FC_PT2PT) { 895 phba->pport->fc_myDID = 0; 896 mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 897 if (mb) { 898 lpfc_config_link(phba, mb); 899 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; 900 mb->vport = vport; 901 if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) 902 == MBX_NOT_FINISHED) { 903 mempool_free(mb, phba->mbox_mem_pool); 904 } 905 } 906 spin_lock_irq(shost->host_lock); 907 phba->pport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI); 908 spin_unlock_irq(shost->host_lock); 909 } 910 911 return 0; 912 } 913 914 static void 915 lpfc_linkup_cleanup_nodes(struct lpfc_vport *vport) 916 { 917 struct lpfc_nodelist *ndlp; 918 919 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { 920 if (!NLP_CHK_NODE_ACT(ndlp)) 921 continue; 922 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) 923 continue; 924 if (ndlp->nlp_type & NLP_FABRIC) { 925 /* On Linkup its safe to clean up the ndlp 926 * from Fabric connections. 927 */ 928 if (ndlp->nlp_DID != Fabric_DID) 929 lpfc_unreg_rpi(vport, ndlp); 930 lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); 931 } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) { 932 /* Fail outstanding IO now since device is 933 * marked for PLOGI. 934 */ 935 lpfc_unreg_rpi(vport, ndlp); 936 } 937 } 938 } 939 940 static void 941 lpfc_linkup_port(struct lpfc_vport *vport) 942 { 943 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 944 struct lpfc_hba *phba = vport->phba; 945 946 if ((vport->load_flag & FC_UNLOADING) != 0) 947 return; 948 949 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, 950 "Link Up: top:x%x speed:x%x flg:x%x", 951 phba->fc_topology, phba->fc_linkspeed, phba->link_flag); 952 953 /* If NPIV is not enabled, only bring the physical port up */ 954 if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && 955 (vport != phba->pport)) 956 return; 957 958 fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKUP, 0); 959 960 spin_lock_irq(shost->host_lock); 961 vport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI | FC_ABORT_DISCOVERY | 962 FC_RSCN_MODE | FC_NLP_MORE | FC_RSCN_DISCOVERY); 963 vport->fc_flag |= FC_NDISC_ACTIVE; 964 vport->fc_ns_retry = 0; 965 spin_unlock_irq(shost->host_lock); 966 967 if (vport->fc_flag & FC_LBIT) 968 lpfc_linkup_cleanup_nodes(vport); 969 970 } 971 972 static int 973 lpfc_linkup(struct lpfc_hba *phba) 974 { 975 struct lpfc_vport **vports; 976 int i; 977 978 lpfc_cleanup_wt_rrqs(phba); 979 phba->link_state = LPFC_LINK_UP; 980 981 /* Unblock fabric iocbs if they are blocked */ 982 clear_bit(FABRIC_COMANDS_BLOCKED, &phba->bit_flags); 983 del_timer_sync(&phba->fabric_block_timer); 984 985 vports = lpfc_create_vport_work_array(phba); 986 if (vports != NULL) 987 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) 988 lpfc_linkup_port(vports[i]); 989 lpfc_destroy_vport_work_array(phba, vports); 990 if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && 991 (phba->sli_rev < LPFC_SLI_REV4)) 992 lpfc_issue_clear_la(phba, phba->pport); 993 994 return 0; 995 } 996 997 /* 998 * This routine handles processing a CLEAR_LA mailbox 999 * command upon completion. It is setup in the LPFC_MBOXQ 1000 * as the completion routine when the command is 1001 * handed off to the SLI layer. 1002 */ 1003 static void 1004 lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 1005 { 1006 struct lpfc_vport *vport = pmb->vport; 1007 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 1008 struct lpfc_sli *psli = &phba->sli; 1009 MAILBOX_t *mb = &pmb->u.mb; 1010 uint32_t control; 1011 1012 /* Since we don't do discovery right now, turn these off here */ 1013 psli->ring[psli->extra_ring].flag &= ~LPFC_STOP_IOCB_EVENT; 1014 psli->ring[psli->fcp_ring].flag &= ~LPFC_STOP_IOCB_EVENT; 1015 psli->ring[psli->next_ring].flag &= ~LPFC_STOP_IOCB_EVENT; 1016 1017 /* Check for error */ 1018 if ((mb->mbxStatus) && (mb->mbxStatus != 0x1601)) { 1019 /* CLEAR_LA mbox error <mbxStatus> state <hba_state> */ 1020 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, 1021 "0320 CLEAR_LA mbxStatus error x%x hba " 1022 "state x%x\n", 1023 mb->mbxStatus, vport->port_state); 1024 phba->link_state = LPFC_HBA_ERROR; 1025 goto out; 1026 } 1027 1028 if (vport->port_type == LPFC_PHYSICAL_PORT) 1029 phba->link_state = LPFC_HBA_READY; 1030 1031 spin_lock_irq(&phba->hbalock); 1032 psli->sli_flag |= LPFC_PROCESS_LA; 1033 control = readl(phba->HCregaddr); 1034 control |= HC_LAINT_ENA; 1035 writel(control, phba->HCregaddr); 1036 readl(phba->HCregaddr); /* flush */ 1037 spin_unlock_irq(&phba->hbalock); 1038 mempool_free(pmb, phba->mbox_mem_pool); 1039 return; 1040 1041 out: 1042 /* Device Discovery completes */ 1043 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, 1044 "0225 Device Discovery completes\n"); 1045 mempool_free(pmb, phba->mbox_mem_pool); 1046 1047 spin_lock_irq(shost->host_lock); 1048 vport->fc_flag &= ~FC_ABORT_DISCOVERY; 1049 spin_unlock_irq(shost->host_lock); 1050 1051 lpfc_can_disctmo(vport); 1052 1053 /* turn on Link Attention interrupts */ 1054 1055 spin_lock_irq(&phba->hbalock); 1056 psli->sli_flag |= LPFC_PROCESS_LA; 1057 control = readl(phba->HCregaddr); 1058 control |= HC_LAINT_ENA; 1059 writel(control, phba->HCregaddr); 1060 readl(phba->HCregaddr); /* flush */ 1061 spin_unlock_irq(&phba->hbalock); 1062 1063 return; 1064 } 1065 1066 1067 static void 1068 lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 1069 { 1070 struct lpfc_vport *vport = pmb->vport; 1071 1072 if (pmb->u.mb.mbxStatus) 1073 goto out; 1074 1075 mempool_free(pmb, phba->mbox_mem_pool); 1076 1077 /* don't perform discovery for SLI4 loopback diagnostic test */ 1078 if ((phba->sli_rev == LPFC_SLI_REV4) && 1079 !(phba->hba_flag & HBA_FCOE_MODE) && 1080 (phba->link_flag & LS_LOOPBACK_MODE)) 1081 return; 1082 1083 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP && 1084 vport->fc_flag & FC_PUBLIC_LOOP && 1085 !(vport->fc_flag & FC_LBIT)) { 1086 /* Need to wait for FAN - use discovery timer 1087 * for timeout. port_state is identically 1088 * LPFC_LOCAL_CFG_LINK while waiting for FAN 1089 */ 1090 lpfc_set_disctmo(vport); 1091 return; 1092 } 1093 1094 /* Start discovery by sending a FLOGI. port_state is identically 1095 * LPFC_FLOGI while waiting for FLOGI cmpl 1096 */ 1097 if (vport->port_state != LPFC_FLOGI) 1098 lpfc_initial_flogi(vport); 1099 return; 1100 1101 out: 1102 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, 1103 "0306 CONFIG_LINK mbxStatus error x%x " 1104 "HBA state x%x\n", 1105 pmb->u.mb.mbxStatus, vport->port_state); 1106 mempool_free(pmb, phba->mbox_mem_pool); 1107 1108 lpfc_linkdown(phba); 1109 1110 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, 1111 "0200 CONFIG_LINK bad hba state x%x\n", 1112 vport->port_state); 1113 1114 lpfc_issue_clear_la(phba, vport); 1115 return; 1116 } 1117 1118 /** 1119 * lpfc_sli4_clear_fcf_rr_bmask 1120 * @phba pointer to the struct lpfc_hba for this port. 1121 * This fucnction resets the round robin bit mask and clears the 1122 * fcf priority list. The list deletions are done while holding the 1123 * hbalock. The ON_LIST flag and the FLOGI_FAILED flags are cleared 1124 * from the lpfc_fcf_pri record. 1125 **/ 1126 void 1127 lpfc_sli4_clear_fcf_rr_bmask(struct lpfc_hba *phba) 1128 { 1129 struct lpfc_fcf_pri *fcf_pri; 1130 struct lpfc_fcf_pri *next_fcf_pri; 1131 memset(phba->fcf.fcf_rr_bmask, 0, sizeof(*phba->fcf.fcf_rr_bmask)); 1132 spin_lock_irq(&phba->hbalock); 1133 list_for_each_entry_safe(fcf_pri, next_fcf_pri, 1134 &phba->fcf.fcf_pri_list, list) { 1135 list_del_init(&fcf_pri->list); 1136 fcf_pri->fcf_rec.flag = 0; 1137 } 1138 spin_unlock_irq(&phba->hbalock); 1139 } 1140 static void 1141 lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 1142 { 1143 struct lpfc_vport *vport = mboxq->vport; 1144 1145 if (mboxq->u.mb.mbxStatus) { 1146 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, 1147 "2017 REG_FCFI mbxStatus error x%x " 1148 "HBA state x%x\n", 1149 mboxq->u.mb.mbxStatus, vport->port_state); 1150 goto fail_out; 1151 } 1152 1153 /* Start FCoE discovery by sending a FLOGI. */ 1154 phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi, &mboxq->u.mqe.un.reg_fcfi); 1155 /* Set the FCFI registered flag */ 1156 spin_lock_irq(&phba->hbalock); 1157 phba->fcf.fcf_flag |= FCF_REGISTERED; 1158 spin_unlock_irq(&phba->hbalock); 1159 1160 /* If there is a pending FCoE event, restart FCF table scan. */ 1161 if ((!(phba->hba_flag & FCF_RR_INPROG)) && 1162 lpfc_check_pending_fcoe_event(phba, LPFC_UNREG_FCF)) 1163 goto fail_out; 1164 1165 /* Mark successful completion of FCF table scan */ 1166 spin_lock_irq(&phba->hbalock); 1167 phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE); 1168 phba->hba_flag &= ~FCF_TS_INPROG; 1169 if (vport->port_state != LPFC_FLOGI) { 1170 phba->hba_flag |= FCF_RR_INPROG; 1171 spin_unlock_irq(&phba->hbalock); 1172 lpfc_issue_init_vfi(vport); 1173 goto out; 1174 } 1175 spin_unlock_irq(&phba->hbalock); 1176 goto out; 1177 1178 fail_out: 1179 spin_lock_irq(&phba->hbalock); 1180 phba->hba_flag &= ~FCF_RR_INPROG; 1181 spin_unlock_irq(&phba->hbalock); 1182 out: 1183 mempool_free(mboxq, phba->mbox_mem_pool); 1184 } 1185 1186 /** 1187 * lpfc_fab_name_match - Check if the fcf fabric name match. 1188 * @fab_name: pointer to fabric name. 1189 * @new_fcf_record: pointer to fcf record. 1190 * 1191 * This routine compare the fcf record's fabric name with provided 1192 * fabric name. If the fabric name are identical this function 1193 * returns 1 else return 0. 1194 **/ 1195 static uint32_t 1196 lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record) 1197 { 1198 if (fab_name[0] != bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record)) 1199 return 0; 1200 if (fab_name[1] != bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record)) 1201 return 0; 1202 if (fab_name[2] != bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record)) 1203 return 0; 1204 if (fab_name[3] != bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record)) 1205 return 0; 1206 if (fab_name[4] != bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record)) 1207 return 0; 1208 if (fab_name[5] != bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record)) 1209 return 0; 1210 if (fab_name[6] != bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record)) 1211 return 0; 1212 if (fab_name[7] != bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record)) 1213 return 0; 1214 return 1; 1215 } 1216 1217 /** 1218 * lpfc_sw_name_match - Check if the fcf switch name match. 1219 * @fab_name: pointer to fabric name. 1220 * @new_fcf_record: pointer to fcf record. 1221 * 1222 * This routine compare the fcf record's switch name with provided 1223 * switch name. If the switch name are identical this function 1224 * returns 1 else return 0. 1225 **/ 1226 static uint32_t 1227 lpfc_sw_name_match(uint8_t *sw_name, struct fcf_record *new_fcf_record) 1228 { 1229 if (sw_name[0] != bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record)) 1230 return 0; 1231 if (sw_name[1] != bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record)) 1232 return 0; 1233 if (sw_name[2] != bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record)) 1234 return 0; 1235 if (sw_name[3] != bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record)) 1236 return 0; 1237 if (sw_name[4] != bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record)) 1238 return 0; 1239 if (sw_name[5] != bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record)) 1240 return 0; 1241 if (sw_name[6] != bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record)) 1242 return 0; 1243 if (sw_name[7] != bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record)) 1244 return 0; 1245 return 1; 1246 } 1247 1248 /** 1249 * lpfc_mac_addr_match - Check if the fcf mac address match. 1250 * @mac_addr: pointer to mac address. 1251 * @new_fcf_record: pointer to fcf record. 1252 * 1253 * This routine compare the fcf record's mac address with HBA's 1254 * FCF mac address. If the mac addresses are identical this function 1255 * returns 1 else return 0. 1256 **/ 1257 static uint32_t 1258 lpfc_mac_addr_match(uint8_t *mac_addr, struct fcf_record *new_fcf_record) 1259 { 1260 if (mac_addr[0] != bf_get(lpfc_fcf_record_mac_0, new_fcf_record)) 1261 return 0; 1262 if (mac_addr[1] != bf_get(lpfc_fcf_record_mac_1, new_fcf_record)) 1263 return 0; 1264 if (mac_addr[2] != bf_get(lpfc_fcf_record_mac_2, new_fcf_record)) 1265 return 0; 1266 if (mac_addr[3] != bf_get(lpfc_fcf_record_mac_3, new_fcf_record)) 1267 return 0; 1268 if (mac_addr[4] != bf_get(lpfc_fcf_record_mac_4, new_fcf_record)) 1269 return 0; 1270 if (mac_addr[5] != bf_get(lpfc_fcf_record_mac_5, new_fcf_record)) 1271 return 0; 1272 return 1; 1273 } 1274 1275 static bool 1276 lpfc_vlan_id_match(uint16_t curr_vlan_id, uint16_t new_vlan_id) 1277 { 1278 return (curr_vlan_id == new_vlan_id); 1279 } 1280 1281 /** 1282 * lpfc_update_fcf_record - Update driver fcf record 1283 * __lpfc_update_fcf_record_pri - update the lpfc_fcf_pri record. 1284 * @phba: pointer to lpfc hba data structure. 1285 * @fcf_index: Index for the lpfc_fcf_record. 1286 * @new_fcf_record: pointer to hba fcf record. 1287 * 1288 * This routine updates the driver FCF priority record from the new HBA FCF 1289 * record. This routine is called with the host lock held. 1290 **/ 1291 static void 1292 __lpfc_update_fcf_record_pri(struct lpfc_hba *phba, uint16_t fcf_index, 1293 struct fcf_record *new_fcf_record 1294 ) 1295 { 1296 struct lpfc_fcf_pri *fcf_pri; 1297 1298 fcf_pri = &phba->fcf.fcf_pri[fcf_index]; 1299 fcf_pri->fcf_rec.fcf_index = fcf_index; 1300 /* FCF record priority */ 1301 fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority; 1302 1303 } 1304 1305 /** 1306 * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba. 1307 * @fcf: pointer to driver fcf record. 1308 * @new_fcf_record: pointer to fcf record. 1309 * 1310 * This routine copies the FCF information from the FCF 1311 * record to lpfc_hba data structure. 1312 **/ 1313 static void 1314 lpfc_copy_fcf_record(struct lpfc_fcf_rec *fcf_rec, 1315 struct fcf_record *new_fcf_record) 1316 { 1317 /* Fabric name */ 1318 fcf_rec->fabric_name[0] = 1319 bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record); 1320 fcf_rec->fabric_name[1] = 1321 bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record); 1322 fcf_rec->fabric_name[2] = 1323 bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record); 1324 fcf_rec->fabric_name[3] = 1325 bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record); 1326 fcf_rec->fabric_name[4] = 1327 bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record); 1328 fcf_rec->fabric_name[5] = 1329 bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record); 1330 fcf_rec->fabric_name[6] = 1331 bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record); 1332 fcf_rec->fabric_name[7] = 1333 bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record); 1334 /* Mac address */ 1335 fcf_rec->mac_addr[0] = bf_get(lpfc_fcf_record_mac_0, new_fcf_record); 1336 fcf_rec->mac_addr[1] = bf_get(lpfc_fcf_record_mac_1, new_fcf_record); 1337 fcf_rec->mac_addr[2] = bf_get(lpfc_fcf_record_mac_2, new_fcf_record); 1338 fcf_rec->mac_addr[3] = bf_get(lpfc_fcf_record_mac_3, new_fcf_record); 1339 fcf_rec->mac_addr[4] = bf_get(lpfc_fcf_record_mac_4, new_fcf_record); 1340 fcf_rec->mac_addr[5] = bf_get(lpfc_fcf_record_mac_5, new_fcf_record); 1341 /* FCF record index */ 1342 fcf_rec->fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); 1343 /* FCF record priority */ 1344 fcf_rec->priority = new_fcf_record->fip_priority; 1345 /* Switch name */ 1346 fcf_rec->switch_name[0] = 1347 bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record); 1348 fcf_rec->switch_name[1] = 1349 bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record); 1350 fcf_rec->switch_name[2] = 1351 bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record); 1352 fcf_rec->switch_name[3] = 1353 bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record); 1354 fcf_rec->switch_name[4] = 1355 bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record); 1356 fcf_rec->switch_name[5] = 1357 bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record); 1358 fcf_rec->switch_name[6] = 1359 bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record); 1360 fcf_rec->switch_name[7] = 1361 bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record); 1362 } 1363 1364 /** 1365 * lpfc_update_fcf_record - Update driver fcf record 1366 * @phba: pointer to lpfc hba data structure. 1367 * @fcf_rec: pointer to driver fcf record. 1368 * @new_fcf_record: pointer to hba fcf record. 1369 * @addr_mode: address mode to be set to the driver fcf record. 1370 * @vlan_id: vlan tag to be set to the driver fcf record. 1371 * @flag: flag bits to be set to the driver fcf record. 1372 * 1373 * This routine updates the driver FCF record from the new HBA FCF record 1374 * together with the address mode, vlan_id, and other informations. This 1375 * routine is called with the host lock held. 1376 **/ 1377 static void 1378 __lpfc_update_fcf_record(struct lpfc_hba *phba, struct lpfc_fcf_rec *fcf_rec, 1379 struct fcf_record *new_fcf_record, uint32_t addr_mode, 1380 uint16_t vlan_id, uint32_t flag) 1381 { 1382 /* Copy the fields from the HBA's FCF record */ 1383 lpfc_copy_fcf_record(fcf_rec, new_fcf_record); 1384 /* Update other fields of driver FCF record */ 1385 fcf_rec->addr_mode = addr_mode; 1386 fcf_rec->vlan_id = vlan_id; 1387 fcf_rec->flag |= (flag | RECORD_VALID); 1388 __lpfc_update_fcf_record_pri(phba, 1389 bf_get(lpfc_fcf_record_fcf_index, new_fcf_record), 1390 new_fcf_record); 1391 } 1392 1393 /** 1394 * lpfc_register_fcf - Register the FCF with hba. 1395 * @phba: pointer to lpfc hba data structure. 1396 * 1397 * This routine issues a register fcfi mailbox command to register 1398 * the fcf with HBA. 1399 **/ 1400 static void 1401 lpfc_register_fcf(struct lpfc_hba *phba) 1402 { 1403 LPFC_MBOXQ_t *fcf_mbxq; 1404 int rc; 1405 1406 spin_lock_irq(&phba->hbalock); 1407 /* If the FCF is not available do nothing. */ 1408 if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) { 1409 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); 1410 spin_unlock_irq(&phba->hbalock); 1411 return; 1412 } 1413 1414 /* The FCF is already registered, start discovery */ 1415 if (phba->fcf.fcf_flag & FCF_REGISTERED) { 1416 phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE); 1417 phba->hba_flag &= ~FCF_TS_INPROG; 1418 if (phba->pport->port_state != LPFC_FLOGI) { 1419 phba->hba_flag |= FCF_RR_INPROG; 1420 spin_unlock_irq(&phba->hbalock); 1421 lpfc_initial_flogi(phba->pport); 1422 return; 1423 } 1424 spin_unlock_irq(&phba->hbalock); 1425 return; 1426 } 1427 spin_unlock_irq(&phba->hbalock); 1428 1429 fcf_mbxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 1430 if (!fcf_mbxq) { 1431 spin_lock_irq(&phba->hbalock); 1432 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); 1433 spin_unlock_irq(&phba->hbalock); 1434 return; 1435 } 1436 1437 lpfc_reg_fcfi(phba, fcf_mbxq); 1438 fcf_mbxq->vport = phba->pport; 1439 fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi; 1440 rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT); 1441 if (rc == MBX_NOT_FINISHED) { 1442 spin_lock_irq(&phba->hbalock); 1443 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); 1444 spin_unlock_irq(&phba->hbalock); 1445 mempool_free(fcf_mbxq, phba->mbox_mem_pool); 1446 } 1447 1448 return; 1449 } 1450 1451 /** 1452 * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery. 1453 * @phba: pointer to lpfc hba data structure. 1454 * @new_fcf_record: pointer to fcf record. 1455 * @boot_flag: Indicates if this record used by boot bios. 1456 * @addr_mode: The address mode to be used by this FCF 1457 * @vlan_id: The vlan id to be used as vlan tagging by this FCF. 1458 * 1459 * This routine compare the fcf record with connect list obtained from the 1460 * config region to decide if this FCF can be used for SAN discovery. It returns 1461 * 1 if this record can be used for SAN discovery else return zero. If this FCF 1462 * record can be used for SAN discovery, the boot_flag will indicate if this FCF 1463 * is used by boot bios and addr_mode will indicate the addressing mode to be 1464 * used for this FCF when the function returns. 1465 * If the FCF record need to be used with a particular vlan id, the vlan is 1466 * set in the vlan_id on return of the function. If not VLAN tagging need to 1467 * be used with the FCF vlan_id will be set to LPFC_FCOE_NULL_VID; 1468 **/ 1469 static int 1470 lpfc_match_fcf_conn_list(struct lpfc_hba *phba, 1471 struct fcf_record *new_fcf_record, 1472 uint32_t *boot_flag, uint32_t *addr_mode, 1473 uint16_t *vlan_id) 1474 { 1475 struct lpfc_fcf_conn_entry *conn_entry; 1476 int i, j, fcf_vlan_id = 0; 1477 1478 /* Find the lowest VLAN id in the FCF record */ 1479 for (i = 0; i < 512; i++) { 1480 if (new_fcf_record->vlan_bitmap[i]) { 1481 fcf_vlan_id = i * 8; 1482 j = 0; 1483 while (!((new_fcf_record->vlan_bitmap[i] >> j) & 1)) { 1484 j++; 1485 fcf_vlan_id++; 1486 } 1487 break; 1488 } 1489 } 1490 1491 /* If FCF not available return 0 */ 1492 if (!bf_get(lpfc_fcf_record_fcf_avail, new_fcf_record) || 1493 !bf_get(lpfc_fcf_record_fcf_valid, new_fcf_record)) 1494 return 0; 1495 1496 if (!(phba->hba_flag & HBA_FIP_SUPPORT)) { 1497 *boot_flag = 0; 1498 *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, 1499 new_fcf_record); 1500 if (phba->valid_vlan) 1501 *vlan_id = phba->vlan_id; 1502 else 1503 *vlan_id = LPFC_FCOE_NULL_VID; 1504 return 1; 1505 } 1506 1507 /* 1508 * If there are no FCF connection table entry, driver connect to all 1509 * FCFs. 1510 */ 1511 if (list_empty(&phba->fcf_conn_rec_list)) { 1512 *boot_flag = 0; 1513 *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, 1514 new_fcf_record); 1515 1516 /* 1517 * When there are no FCF connect entries, use driver's default 1518 * addressing mode - FPMA. 1519 */ 1520 if (*addr_mode & LPFC_FCF_FPMA) 1521 *addr_mode = LPFC_FCF_FPMA; 1522 1523 /* If FCF record report a vlan id use that vlan id */ 1524 if (fcf_vlan_id) 1525 *vlan_id = fcf_vlan_id; 1526 else 1527 *vlan_id = LPFC_FCOE_NULL_VID; 1528 return 1; 1529 } 1530 1531 list_for_each_entry(conn_entry, 1532 &phba->fcf_conn_rec_list, list) { 1533 if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID)) 1534 continue; 1535 1536 if ((conn_entry->conn_rec.flags & FCFCNCT_FBNM_VALID) && 1537 !lpfc_fab_name_match(conn_entry->conn_rec.fabric_name, 1538 new_fcf_record)) 1539 continue; 1540 if ((conn_entry->conn_rec.flags & FCFCNCT_SWNM_VALID) && 1541 !lpfc_sw_name_match(conn_entry->conn_rec.switch_name, 1542 new_fcf_record)) 1543 continue; 1544 if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) { 1545 /* 1546 * If the vlan bit map does not have the bit set for the 1547 * vlan id to be used, then it is not a match. 1548 */ 1549 if (!(new_fcf_record->vlan_bitmap 1550 [conn_entry->conn_rec.vlan_tag / 8] & 1551 (1 << (conn_entry->conn_rec.vlan_tag % 8)))) 1552 continue; 1553 } 1554 1555 /* 1556 * If connection record does not support any addressing mode, 1557 * skip the FCF record. 1558 */ 1559 if (!(bf_get(lpfc_fcf_record_mac_addr_prov, new_fcf_record) 1560 & (LPFC_FCF_FPMA | LPFC_FCF_SPMA))) 1561 continue; 1562 1563 /* 1564 * Check if the connection record specifies a required 1565 * addressing mode. 1566 */ 1567 if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && 1568 !(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)) { 1569 1570 /* 1571 * If SPMA required but FCF not support this continue. 1572 */ 1573 if ((conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && 1574 !(bf_get(lpfc_fcf_record_mac_addr_prov, 1575 new_fcf_record) & LPFC_FCF_SPMA)) 1576 continue; 1577 1578 /* 1579 * If FPMA required but FCF not support this continue. 1580 */ 1581 if (!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && 1582 !(bf_get(lpfc_fcf_record_mac_addr_prov, 1583 new_fcf_record) & LPFC_FCF_FPMA)) 1584 continue; 1585 } 1586 1587 /* 1588 * This fcf record matches filtering criteria. 1589 */ 1590 if (conn_entry->conn_rec.flags & FCFCNCT_BOOT) 1591 *boot_flag = 1; 1592 else 1593 *boot_flag = 0; 1594 1595 /* 1596 * If user did not specify any addressing mode, or if the 1597 * preferred addressing mode specified by user is not supported 1598 * by FCF, allow fabric to pick the addressing mode. 1599 */ 1600 *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, 1601 new_fcf_record); 1602 /* 1603 * If the user specified a required address mode, assign that 1604 * address mode 1605 */ 1606 if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && 1607 (!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED))) 1608 *addr_mode = (conn_entry->conn_rec.flags & 1609 FCFCNCT_AM_SPMA) ? 1610 LPFC_FCF_SPMA : LPFC_FCF_FPMA; 1611 /* 1612 * If the user specified a preferred address mode, use the 1613 * addr mode only if FCF support the addr_mode. 1614 */ 1615 else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && 1616 (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) && 1617 (conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && 1618 (*addr_mode & LPFC_FCF_SPMA)) 1619 *addr_mode = LPFC_FCF_SPMA; 1620 else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && 1621 (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) && 1622 !(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && 1623 (*addr_mode & LPFC_FCF_FPMA)) 1624 *addr_mode = LPFC_FCF_FPMA; 1625 1626 /* If matching connect list has a vlan id, use it */ 1627 if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) 1628 *vlan_id = conn_entry->conn_rec.vlan_tag; 1629 /* 1630 * If no vlan id is specified in connect list, use the vlan id 1631 * in the FCF record 1632 */ 1633 else if (fcf_vlan_id) 1634 *vlan_id = fcf_vlan_id; 1635 else 1636 *vlan_id = LPFC_FCOE_NULL_VID; 1637 1638 return 1; 1639 } 1640 1641 return 0; 1642 } 1643 1644 /** 1645 * lpfc_check_pending_fcoe_event - Check if there is pending fcoe event. 1646 * @phba: pointer to lpfc hba data structure. 1647 * @unreg_fcf: Unregister FCF if FCF table need to be re-scaned. 1648 * 1649 * This function check if there is any fcoe event pending while driver 1650 * scan FCF entries. If there is any pending event, it will restart the 1651 * FCF saning and return 1 else return 0. 1652 */ 1653 int 1654 lpfc_check_pending_fcoe_event(struct lpfc_hba *phba, uint8_t unreg_fcf) 1655 { 1656 /* 1657 * If the Link is up and no FCoE events while in the 1658 * FCF discovery, no need to restart FCF discovery. 1659 */ 1660 if ((phba->link_state >= LPFC_LINK_UP) && 1661 (phba->fcoe_eventtag == phba->fcoe_eventtag_at_fcf_scan)) 1662 return 0; 1663 1664 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 1665 "2768 Pending link or FCF event during current " 1666 "handling of the previous event: link_state:x%x, " 1667 "evt_tag_at_scan:x%x, evt_tag_current:x%x\n", 1668 phba->link_state, phba->fcoe_eventtag_at_fcf_scan, 1669 phba->fcoe_eventtag); 1670 1671 spin_lock_irq(&phba->hbalock); 1672 phba->fcf.fcf_flag &= ~FCF_AVAILABLE; 1673 spin_unlock_irq(&phba->hbalock); 1674 1675 if (phba->link_state >= LPFC_LINK_UP) { 1676 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, 1677 "2780 Restart FCF table scan due to " 1678 "pending FCF event:evt_tag_at_scan:x%x, " 1679 "evt_tag_current:x%x\n", 1680 phba->fcoe_eventtag_at_fcf_scan, 1681 phba->fcoe_eventtag); 1682 lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST); 1683 } else { 1684 /* 1685 * Do not continue FCF discovery and clear FCF_TS_INPROG 1686 * flag 1687 */ 1688 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, 1689 "2833 Stop FCF discovery process due to link " 1690 "state change (x%x)\n", phba->link_state); 1691 spin_lock_irq(&phba->hbalock); 1692 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG); 1693 phba->fcf.fcf_flag &= ~(FCF_REDISC_FOV | FCF_DISCOVERY); 1694 spin_unlock_irq(&phba->hbalock); 1695 } 1696 1697 /* Unregister the currently registered FCF if required */ 1698 if (unreg_fcf) { 1699 spin_lock_irq(&phba->hbalock); 1700 phba->fcf.fcf_flag &= ~FCF_REGISTERED; 1701 spin_unlock_irq(&phba->hbalock); 1702 lpfc_sli4_unregister_fcf(phba); 1703 } 1704 return 1; 1705 } 1706 1707 /** 1708 * lpfc_sli4_new_fcf_random_select - Randomly select an eligible new fcf record 1709 * @phba: pointer to lpfc hba data structure. 1710 * @fcf_cnt: number of eligible fcf record seen so far. 1711 * 1712 * This function makes an running random selection decision on FCF record to 1713 * use through a sequence of @fcf_cnt eligible FCF records with equal 1714 * probability. To perform integer manunipulation of random numbers with 1715 * size unit32_t, the lower 16 bits of the 32-bit random number returned 1716 * from random32() are taken as the random random number generated. 1717 * 1718 * Returns true when outcome is for the newly read FCF record should be 1719 * chosen; otherwise, return false when outcome is for keeping the previously 1720 * chosen FCF record. 1721 **/ 1722 static bool 1723 lpfc_sli4_new_fcf_random_select(struct lpfc_hba *phba, uint32_t fcf_cnt) 1724 { 1725 uint32_t rand_num; 1726 1727 /* Get 16-bit uniform random number */ 1728 rand_num = (0xFFFF & random32()); 1729 1730 /* Decision with probability 1/fcf_cnt */ 1731 if ((fcf_cnt * rand_num) < 0xFFFF) 1732 return true; 1733 else 1734 return false; 1735 } 1736 1737 /** 1738 * lpfc_sli4_fcf_rec_mbox_parse - Parse read_fcf mbox command. 1739 * @phba: pointer to lpfc hba data structure. 1740 * @mboxq: pointer to mailbox object. 1741 * @next_fcf_index: pointer to holder of next fcf index. 1742 * 1743 * This routine parses the non-embedded fcf mailbox command by performing the 1744 * necessarily error checking, non-embedded read FCF record mailbox command 1745 * SGE parsing, and endianness swapping. 1746 * 1747 * Returns the pointer to the new FCF record in the non-embedded mailbox 1748 * command DMA memory if successfully, other NULL. 1749 */ 1750 static struct fcf_record * 1751 lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, 1752 uint16_t *next_fcf_index) 1753 { 1754 void *virt_addr; 1755 dma_addr_t phys_addr; 1756 struct lpfc_mbx_sge sge; 1757 struct lpfc_mbx_read_fcf_tbl *read_fcf; 1758 uint32_t shdr_status, shdr_add_status; 1759 union lpfc_sli4_cfg_shdr *shdr; 1760 struct fcf_record *new_fcf_record; 1761 1762 /* Get the first SGE entry from the non-embedded DMA memory. This 1763 * routine only uses a single SGE. 1764 */ 1765 lpfc_sli4_mbx_sge_get(mboxq, 0, &sge); 1766 phys_addr = getPaddr(sge.pa_hi, sge.pa_lo); 1767 if (unlikely(!mboxq->sge_array)) { 1768 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, 1769 "2524 Failed to get the non-embedded SGE " 1770 "virtual address\n"); 1771 return NULL; 1772 } 1773 virt_addr = mboxq->sge_array->addr[0]; 1774 1775 shdr = (union lpfc_sli4_cfg_shdr *)virt_addr; 1776 shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); 1777 shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); 1778 if (shdr_status || shdr_add_status) { 1779 if (shdr_status == STATUS_FCF_TABLE_EMPTY) 1780 lpfc_printf_log(phba, KERN_ERR, LOG_FIP, 1781 "2726 READ_FCF_RECORD Indicates empty " 1782 "FCF table.\n"); 1783 else 1784 lpfc_printf_log(phba, KERN_ERR, LOG_FIP, 1785 "2521 READ_FCF_RECORD mailbox failed " 1786 "with status x%x add_status x%x, " 1787 "mbx\n", shdr_status, shdr_add_status); 1788 return NULL; 1789 } 1790 1791 /* Interpreting the returned information of the FCF record */ 1792 read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr; 1793 lpfc_sli_pcimem_bcopy(read_fcf, read_fcf, 1794 sizeof(struct lpfc_mbx_read_fcf_tbl)); 1795 *next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf); 1796 new_fcf_record = (struct fcf_record *)(virt_addr + 1797 sizeof(struct lpfc_mbx_read_fcf_tbl)); 1798 lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record, 1799 offsetof(struct fcf_record, vlan_bitmap)); 1800 new_fcf_record->word137 = le32_to_cpu(new_fcf_record->word137); 1801 new_fcf_record->word138 = le32_to_cpu(new_fcf_record->word138); 1802 1803 return new_fcf_record; 1804 } 1805 1806 /** 1807 * lpfc_sli4_log_fcf_record_info - Log the information of a fcf record 1808 * @phba: pointer to lpfc hba data structure. 1809 * @fcf_record: pointer to the fcf record. 1810 * @vlan_id: the lowest vlan identifier associated to this fcf record. 1811 * @next_fcf_index: the index to the next fcf record in hba's fcf table. 1812 * 1813 * This routine logs the detailed FCF record if the LOG_FIP loggin is 1814 * enabled. 1815 **/ 1816 static void 1817 lpfc_sli4_log_fcf_record_info(struct lpfc_hba *phba, 1818 struct fcf_record *fcf_record, 1819 uint16_t vlan_id, 1820 uint16_t next_fcf_index) 1821 { 1822 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 1823 "2764 READ_FCF_RECORD:\n" 1824 "\tFCF_Index : x%x\n" 1825 "\tFCF_Avail : x%x\n" 1826 "\tFCF_Valid : x%x\n" 1827 "\tFIP_Priority : x%x\n" 1828 "\tMAC_Provider : x%x\n" 1829 "\tLowest VLANID : x%x\n" 1830 "\tFCF_MAC Addr : x%x:%x:%x:%x:%x:%x\n" 1831 "\tFabric_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n" 1832 "\tSwitch_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n" 1833 "\tNext_FCF_Index: x%x\n", 1834 bf_get(lpfc_fcf_record_fcf_index, fcf_record), 1835 bf_get(lpfc_fcf_record_fcf_avail, fcf_record), 1836 bf_get(lpfc_fcf_record_fcf_valid, fcf_record), 1837 fcf_record->fip_priority, 1838 bf_get(lpfc_fcf_record_mac_addr_prov, fcf_record), 1839 vlan_id, 1840 bf_get(lpfc_fcf_record_mac_0, fcf_record), 1841 bf_get(lpfc_fcf_record_mac_1, fcf_record), 1842 bf_get(lpfc_fcf_record_mac_2, fcf_record), 1843 bf_get(lpfc_fcf_record_mac_3, fcf_record), 1844 bf_get(lpfc_fcf_record_mac_4, fcf_record), 1845 bf_get(lpfc_fcf_record_mac_5, fcf_record), 1846 bf_get(lpfc_fcf_record_fab_name_0, fcf_record), 1847 bf_get(lpfc_fcf_record_fab_name_1, fcf_record), 1848 bf_get(lpfc_fcf_record_fab_name_2, fcf_record), 1849 bf_get(lpfc_fcf_record_fab_name_3, fcf_record), 1850 bf_get(lpfc_fcf_record_fab_name_4, fcf_record), 1851 bf_get(lpfc_fcf_record_fab_name_5, fcf_record), 1852 bf_get(lpfc_fcf_record_fab_name_6, fcf_record), 1853 bf_get(lpfc_fcf_record_fab_name_7, fcf_record), 1854 bf_get(lpfc_fcf_record_switch_name_0, fcf_record), 1855 bf_get(lpfc_fcf_record_switch_name_1, fcf_record), 1856 bf_get(lpfc_fcf_record_switch_name_2, fcf_record), 1857 bf_get(lpfc_fcf_record_switch_name_3, fcf_record), 1858 bf_get(lpfc_fcf_record_switch_name_4, fcf_record), 1859 bf_get(lpfc_fcf_record_switch_name_5, fcf_record), 1860 bf_get(lpfc_fcf_record_switch_name_6, fcf_record), 1861 bf_get(lpfc_fcf_record_switch_name_7, fcf_record), 1862 next_fcf_index); 1863 } 1864 1865 /** 1866 lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF 1867 * @phba: pointer to lpfc hba data structure. 1868 * @fcf_rec: pointer to an existing FCF record. 1869 * @new_fcf_record: pointer to a new FCF record. 1870 * @new_vlan_id: vlan id from the new FCF record. 1871 * 1872 * This function performs matching test of a new FCF record against an existing 1873 * FCF record. If the new_vlan_id passed in is LPFC_FCOE_IGNORE_VID, vlan id 1874 * will not be used as part of the FCF record matching criteria. 1875 * 1876 * Returns true if all the fields matching, otherwise returns false. 1877 */ 1878 static bool 1879 lpfc_sli4_fcf_record_match(struct lpfc_hba *phba, 1880 struct lpfc_fcf_rec *fcf_rec, 1881 struct fcf_record *new_fcf_record, 1882 uint16_t new_vlan_id) 1883 { 1884 if (new_vlan_id != LPFC_FCOE_IGNORE_VID) 1885 if (!lpfc_vlan_id_match(fcf_rec->vlan_id, new_vlan_id)) 1886 return false; 1887 if (!lpfc_mac_addr_match(fcf_rec->mac_addr, new_fcf_record)) 1888 return false; 1889 if (!lpfc_sw_name_match(fcf_rec->switch_name, new_fcf_record)) 1890 return false; 1891 if (!lpfc_fab_name_match(fcf_rec->fabric_name, new_fcf_record)) 1892 return false; 1893 if (fcf_rec->priority != new_fcf_record->fip_priority) 1894 return false; 1895 return true; 1896 } 1897 1898 /** 1899 * lpfc_sli4_fcf_rr_next_proc - processing next roundrobin fcf 1900 * @vport: Pointer to vport object. 1901 * @fcf_index: index to next fcf. 1902 * 1903 * This function processing the roundrobin fcf failover to next fcf index. 1904 * When this function is invoked, there will be a current fcf registered 1905 * for flogi. 1906 * Return: 0 for continue retrying flogi on currently registered fcf; 1907 * 1 for stop flogi on currently registered fcf; 1908 */ 1909 int lpfc_sli4_fcf_rr_next_proc(struct lpfc_vport *vport, uint16_t fcf_index) 1910 { 1911 struct lpfc_hba *phba = vport->phba; 1912 int rc; 1913 1914 if (fcf_index == LPFC_FCOE_FCF_NEXT_NONE) { 1915 spin_lock_irq(&phba->hbalock); 1916 if (phba->hba_flag & HBA_DEVLOSS_TMO) { 1917 spin_unlock_irq(&phba->hbalock); 1918 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 1919 "2872 Devloss tmo with no eligible " 1920 "FCF, unregister in-use FCF (x%x) " 1921 "and rescan FCF table\n", 1922 phba->fcf.current_rec.fcf_indx); 1923 lpfc_unregister_fcf_rescan(phba); 1924 goto stop_flogi_current_fcf; 1925 } 1926 /* Mark the end to FLOGI roundrobin failover */ 1927 phba->hba_flag &= ~FCF_RR_INPROG; 1928 /* Allow action to new fcf asynchronous event */ 1929 phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE); 1930 spin_unlock_irq(&phba->hbalock); 1931 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 1932 "2865 No FCF available, stop roundrobin FCF " 1933 "failover and change port state:x%x/x%x\n", 1934 phba->pport->port_state, LPFC_VPORT_UNKNOWN); 1935 phba->pport->port_state = LPFC_VPORT_UNKNOWN; 1936 goto stop_flogi_current_fcf; 1937 } else { 1938 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_ELS, 1939 "2794 Try FLOGI roundrobin FCF failover to " 1940 "(x%x)\n", fcf_index); 1941 rc = lpfc_sli4_fcf_rr_read_fcf_rec(phba, fcf_index); 1942 if (rc) 1943 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS, 1944 "2761 FLOGI roundrobin FCF failover " 1945 "failed (rc:x%x) to read FCF (x%x)\n", 1946 rc, phba->fcf.current_rec.fcf_indx); 1947 else 1948 goto stop_flogi_current_fcf; 1949 } 1950 return 0; 1951 1952 stop_flogi_current_fcf: 1953 lpfc_can_disctmo(vport); 1954 return 1; 1955 } 1956 1957 /** 1958 * lpfc_sli4_fcf_pri_list_del 1959 * @phba: pointer to lpfc hba data structure. 1960 * @fcf_index the index of the fcf record to delete 1961 * This routine checks the on list flag of the fcf_index to be deleted. 1962 * If it is one the list then it is removed from the list, and the flag 1963 * is cleared. This routine grab the hbalock before removing the fcf 1964 * record from the list. 1965 **/ 1966 static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba, 1967 uint16_t fcf_index) 1968 { 1969 struct lpfc_fcf_pri *new_fcf_pri; 1970 1971 new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; 1972 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 1973 "3058 deleting idx x%x pri x%x flg x%x\n", 1974 fcf_index, new_fcf_pri->fcf_rec.priority, 1975 new_fcf_pri->fcf_rec.flag); 1976 spin_lock_irq(&phba->hbalock); 1977 if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST) { 1978 if (phba->fcf.current_rec.priority == 1979 new_fcf_pri->fcf_rec.priority) 1980 phba->fcf.eligible_fcf_cnt--; 1981 list_del_init(&new_fcf_pri->list); 1982 new_fcf_pri->fcf_rec.flag &= ~LPFC_FCF_ON_PRI_LIST; 1983 } 1984 spin_unlock_irq(&phba->hbalock); 1985 } 1986 1987 /** 1988 * lpfc_sli4_set_fcf_flogi_fail 1989 * @phba: pointer to lpfc hba data structure. 1990 * @fcf_index the index of the fcf record to update 1991 * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED 1992 * flag so the the round robin slection for the particular priority level 1993 * will try a different fcf record that does not have this bit set. 1994 * If the fcf record is re-read for any reason this flag is cleared brfore 1995 * adding it to the priority list. 1996 **/ 1997 void 1998 lpfc_sli4_set_fcf_flogi_fail(struct lpfc_hba *phba, uint16_t fcf_index) 1999 { 2000 struct lpfc_fcf_pri *new_fcf_pri; 2001 new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; 2002 spin_lock_irq(&phba->hbalock); 2003 new_fcf_pri->fcf_rec.flag |= LPFC_FCF_FLOGI_FAILED; 2004 spin_unlock_irq(&phba->hbalock); 2005 } 2006 2007 /** 2008 * lpfc_sli4_fcf_pri_list_add 2009 * @phba: pointer to lpfc hba data structure. 2010 * @fcf_index the index of the fcf record to add 2011 * This routine checks the priority of the fcf_index to be added. 2012 * If it is a lower priority than the current head of the fcf_pri list 2013 * then it is added to the list in the right order. 2014 * If it is the same priority as the current head of the list then it 2015 * is added to the head of the list and its bit in the rr_bmask is set. 2016 * If the fcf_index to be added is of a higher priority than the current 2017 * head of the list then the rr_bmask is cleared, its bit is set in the 2018 * rr_bmask and it is added to the head of the list. 2019 * returns: 2020 * 0=success 1=failure 2021 **/ 2022 int lpfc_sli4_fcf_pri_list_add(struct lpfc_hba *phba, uint16_t fcf_index, 2023 struct fcf_record *new_fcf_record) 2024 { 2025 uint16_t current_fcf_pri; 2026 uint16_t last_index; 2027 struct lpfc_fcf_pri *fcf_pri; 2028 struct lpfc_fcf_pri *next_fcf_pri; 2029 struct lpfc_fcf_pri *new_fcf_pri; 2030 int ret; 2031 2032 new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; 2033 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2034 "3059 adding idx x%x pri x%x flg x%x\n", 2035 fcf_index, new_fcf_record->fip_priority, 2036 new_fcf_pri->fcf_rec.flag); 2037 spin_lock_irq(&phba->hbalock); 2038 if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST) 2039 list_del_init(&new_fcf_pri->list); 2040 new_fcf_pri->fcf_rec.fcf_index = fcf_index; 2041 new_fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority; 2042 if (list_empty(&phba->fcf.fcf_pri_list)) { 2043 list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list); 2044 ret = lpfc_sli4_fcf_rr_index_set(phba, 2045 new_fcf_pri->fcf_rec.fcf_index); 2046 goto out; 2047 } 2048 2049 last_index = find_first_bit(phba->fcf.fcf_rr_bmask, 2050 LPFC_SLI4_FCF_TBL_INDX_MAX); 2051 if (last_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) { 2052 ret = 0; /* Empty rr list */ 2053 goto out; 2054 } 2055 current_fcf_pri = phba->fcf.fcf_pri[last_index].fcf_rec.priority; 2056 if (new_fcf_pri->fcf_rec.priority <= current_fcf_pri) { 2057 list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list); 2058 if (new_fcf_pri->fcf_rec.priority < current_fcf_pri) { 2059 memset(phba->fcf.fcf_rr_bmask, 0, 2060 sizeof(*phba->fcf.fcf_rr_bmask)); 2061 /* fcfs_at_this_priority_level = 1; */ 2062 phba->fcf.eligible_fcf_cnt = 1; 2063 } else 2064 /* fcfs_at_this_priority_level++; */ 2065 phba->fcf.eligible_fcf_cnt++; 2066 ret = lpfc_sli4_fcf_rr_index_set(phba, 2067 new_fcf_pri->fcf_rec.fcf_index); 2068 goto out; 2069 } 2070 2071 list_for_each_entry_safe(fcf_pri, next_fcf_pri, 2072 &phba->fcf.fcf_pri_list, list) { 2073 if (new_fcf_pri->fcf_rec.priority <= 2074 fcf_pri->fcf_rec.priority) { 2075 if (fcf_pri->list.prev == &phba->fcf.fcf_pri_list) 2076 list_add(&new_fcf_pri->list, 2077 &phba->fcf.fcf_pri_list); 2078 else 2079 list_add(&new_fcf_pri->list, 2080 &((struct lpfc_fcf_pri *) 2081 fcf_pri->list.prev)->list); 2082 ret = 0; 2083 goto out; 2084 } else if (fcf_pri->list.next == &phba->fcf.fcf_pri_list 2085 || new_fcf_pri->fcf_rec.priority < 2086 next_fcf_pri->fcf_rec.priority) { 2087 list_add(&new_fcf_pri->list, &fcf_pri->list); 2088 ret = 0; 2089 goto out; 2090 } 2091 if (new_fcf_pri->fcf_rec.priority > fcf_pri->fcf_rec.priority) 2092 continue; 2093 2094 } 2095 ret = 1; 2096 out: 2097 /* we use = instead of |= to clear the FLOGI_FAILED flag. */ 2098 new_fcf_pri->fcf_rec.flag = LPFC_FCF_ON_PRI_LIST; 2099 spin_unlock_irq(&phba->hbalock); 2100 return ret; 2101 } 2102 2103 /** 2104 * lpfc_mbx_cmpl_fcf_scan_read_fcf_rec - fcf scan read_fcf mbox cmpl handler. 2105 * @phba: pointer to lpfc hba data structure. 2106 * @mboxq: pointer to mailbox object. 2107 * 2108 * This function iterates through all the fcf records available in 2109 * HBA and chooses the optimal FCF record for discovery. After finding 2110 * the FCF for discovery it registers the FCF record and kicks start 2111 * discovery. 2112 * If FCF_IN_USE flag is set in currently used FCF, the routine tries to 2113 * use an FCF record which matches fabric name and mac address of the 2114 * currently used FCF record. 2115 * If the driver supports only one FCF, it will try to use the FCF record 2116 * used by BOOT_BIOS. 2117 */ 2118 void 2119 lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 2120 { 2121 struct fcf_record *new_fcf_record; 2122 uint32_t boot_flag, addr_mode; 2123 uint16_t fcf_index, next_fcf_index; 2124 struct lpfc_fcf_rec *fcf_rec = NULL; 2125 uint16_t vlan_id; 2126 uint32_t seed; 2127 bool select_new_fcf; 2128 int rc; 2129 2130 /* If there is pending FCoE event restart FCF table scan */ 2131 if (lpfc_check_pending_fcoe_event(phba, LPFC_SKIP_UNREG_FCF)) { 2132 lpfc_sli4_mbox_cmd_free(phba, mboxq); 2133 return; 2134 } 2135 2136 /* Parse the FCF record from the non-embedded mailbox command */ 2137 new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, 2138 &next_fcf_index); 2139 if (!new_fcf_record) { 2140 lpfc_printf_log(phba, KERN_ERR, LOG_FIP, 2141 "2765 Mailbox command READ_FCF_RECORD " 2142 "failed to retrieve a FCF record.\n"); 2143 /* Let next new FCF event trigger fast failover */ 2144 spin_lock_irq(&phba->hbalock); 2145 phba->hba_flag &= ~FCF_TS_INPROG; 2146 spin_unlock_irq(&phba->hbalock); 2147 lpfc_sli4_mbox_cmd_free(phba, mboxq); 2148 return; 2149 } 2150 2151 /* Check the FCF record against the connection list */ 2152 rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, 2153 &addr_mode, &vlan_id); 2154 2155 /* Log the FCF record information if turned on */ 2156 lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, 2157 next_fcf_index); 2158 2159 /* 2160 * If the fcf record does not match with connect list entries 2161 * read the next entry; otherwise, this is an eligible FCF 2162 * record for roundrobin FCF failover. 2163 */ 2164 if (!rc) { 2165 lpfc_sli4_fcf_pri_list_del(phba, 2166 bf_get(lpfc_fcf_record_fcf_index, 2167 new_fcf_record)); 2168 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, 2169 "2781 FCF (x%x) failed connection " 2170 "list check: (x%x/x%x)\n", 2171 bf_get(lpfc_fcf_record_fcf_index, 2172 new_fcf_record), 2173 bf_get(lpfc_fcf_record_fcf_avail, 2174 new_fcf_record), 2175 bf_get(lpfc_fcf_record_fcf_valid, 2176 new_fcf_record)); 2177 if ((phba->fcf.fcf_flag & FCF_IN_USE) && 2178 lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec, 2179 new_fcf_record, LPFC_FCOE_IGNORE_VID)) { 2180 if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) != 2181 phba->fcf.current_rec.fcf_indx) { 2182 lpfc_printf_log(phba, KERN_ERR, LOG_FIP, 2183 "2862 FCF (x%x) matches property " 2184 "of in-use FCF (x%x)\n", 2185 bf_get(lpfc_fcf_record_fcf_index, 2186 new_fcf_record), 2187 phba->fcf.current_rec.fcf_indx); 2188 goto read_next_fcf; 2189 } 2190 /* 2191 * In case the current in-use FCF record becomes 2192 * invalid/unavailable during FCF discovery that 2193 * was not triggered by fast FCF failover process, 2194 * treat it as fast FCF failover. 2195 */ 2196 if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND) && 2197 !(phba->fcf.fcf_flag & FCF_REDISC_FOV)) { 2198 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, 2199 "2835 Invalid in-use FCF " 2200 "(x%x), enter FCF failover " 2201 "table scan.\n", 2202 phba->fcf.current_rec.fcf_indx); 2203 spin_lock_irq(&phba->hbalock); 2204 phba->fcf.fcf_flag |= FCF_REDISC_FOV; 2205 spin_unlock_irq(&phba->hbalock); 2206 lpfc_sli4_mbox_cmd_free(phba, mboxq); 2207 lpfc_sli4_fcf_scan_read_fcf_rec(phba, 2208 LPFC_FCOE_FCF_GET_FIRST); 2209 return; 2210 } 2211 } 2212 goto read_next_fcf; 2213 } else { 2214 fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); 2215 rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index, 2216 new_fcf_record); 2217 if (rc) 2218 goto read_next_fcf; 2219 } 2220 2221 /* 2222 * If this is not the first FCF discovery of the HBA, use last 2223 * FCF record for the discovery. The condition that a rescan 2224 * matches the in-use FCF record: fabric name, switch name, mac 2225 * address, and vlan_id. 2226 */ 2227 spin_lock_irq(&phba->hbalock); 2228 if (phba->fcf.fcf_flag & FCF_IN_USE) { 2229 if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV && 2230 lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec, 2231 new_fcf_record, vlan_id)) { 2232 if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) == 2233 phba->fcf.current_rec.fcf_indx) { 2234 phba->fcf.fcf_flag |= FCF_AVAILABLE; 2235 if (phba->fcf.fcf_flag & FCF_REDISC_PEND) 2236 /* Stop FCF redisc wait timer */ 2237 __lpfc_sli4_stop_fcf_redisc_wait_timer( 2238 phba); 2239 else if (phba->fcf.fcf_flag & FCF_REDISC_FOV) 2240 /* Fast failover, mark completed */ 2241 phba->fcf.fcf_flag &= ~FCF_REDISC_FOV; 2242 spin_unlock_irq(&phba->hbalock); 2243 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2244 "2836 New FCF matches in-use " 2245 "FCF (x%x)\n", 2246 phba->fcf.current_rec.fcf_indx); 2247 goto out; 2248 } else 2249 lpfc_printf_log(phba, KERN_ERR, LOG_FIP, 2250 "2863 New FCF (x%x) matches " 2251 "property of in-use FCF (x%x)\n", 2252 bf_get(lpfc_fcf_record_fcf_index, 2253 new_fcf_record), 2254 phba->fcf.current_rec.fcf_indx); 2255 } 2256 /* 2257 * Read next FCF record from HBA searching for the matching 2258 * with in-use record only if not during the fast failover 2259 * period. In case of fast failover period, it shall try to 2260 * determine whether the FCF record just read should be the 2261 * next candidate. 2262 */ 2263 if (!(phba->fcf.fcf_flag & FCF_REDISC_FOV)) { 2264 spin_unlock_irq(&phba->hbalock); 2265 goto read_next_fcf; 2266 } 2267 } 2268 /* 2269 * Update on failover FCF record only if it's in FCF fast-failover 2270 * period; otherwise, update on current FCF record. 2271 */ 2272 if (phba->fcf.fcf_flag & FCF_REDISC_FOV) 2273 fcf_rec = &phba->fcf.failover_rec; 2274 else 2275 fcf_rec = &phba->fcf.current_rec; 2276 2277 if (phba->fcf.fcf_flag & FCF_AVAILABLE) { 2278 /* 2279 * If the driver FCF record does not have boot flag 2280 * set and new hba fcf record has boot flag set, use 2281 * the new hba fcf record. 2282 */ 2283 if (boot_flag && !(fcf_rec->flag & BOOT_ENABLE)) { 2284 /* Choose this FCF record */ 2285 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2286 "2837 Update current FCF record " 2287 "(x%x) with new FCF record (x%x)\n", 2288 fcf_rec->fcf_indx, 2289 bf_get(lpfc_fcf_record_fcf_index, 2290 new_fcf_record)); 2291 __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, 2292 addr_mode, vlan_id, BOOT_ENABLE); 2293 spin_unlock_irq(&phba->hbalock); 2294 goto read_next_fcf; 2295 } 2296 /* 2297 * If the driver FCF record has boot flag set and the 2298 * new hba FCF record does not have boot flag, read 2299 * the next FCF record. 2300 */ 2301 if (!boot_flag && (fcf_rec->flag & BOOT_ENABLE)) { 2302 spin_unlock_irq(&phba->hbalock); 2303 goto read_next_fcf; 2304 } 2305 /* 2306 * If the new hba FCF record has lower priority value 2307 * than the driver FCF record, use the new record. 2308 */ 2309 if (new_fcf_record->fip_priority < fcf_rec->priority) { 2310 /* Choose the new FCF record with lower priority */ 2311 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2312 "2838 Update current FCF record " 2313 "(x%x) with new FCF record (x%x)\n", 2314 fcf_rec->fcf_indx, 2315 bf_get(lpfc_fcf_record_fcf_index, 2316 new_fcf_record)); 2317 __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, 2318 addr_mode, vlan_id, 0); 2319 /* Reset running random FCF selection count */ 2320 phba->fcf.eligible_fcf_cnt = 1; 2321 } else if (new_fcf_record->fip_priority == fcf_rec->priority) { 2322 /* Update running random FCF selection count */ 2323 phba->fcf.eligible_fcf_cnt++; 2324 select_new_fcf = lpfc_sli4_new_fcf_random_select(phba, 2325 phba->fcf.eligible_fcf_cnt); 2326 if (select_new_fcf) { 2327 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2328 "2839 Update current FCF record " 2329 "(x%x) with new FCF record (x%x)\n", 2330 fcf_rec->fcf_indx, 2331 bf_get(lpfc_fcf_record_fcf_index, 2332 new_fcf_record)); 2333 /* Choose the new FCF by random selection */ 2334 __lpfc_update_fcf_record(phba, fcf_rec, 2335 new_fcf_record, 2336 addr_mode, vlan_id, 0); 2337 } 2338 } 2339 spin_unlock_irq(&phba->hbalock); 2340 goto read_next_fcf; 2341 } 2342 /* 2343 * This is the first suitable FCF record, choose this record for 2344 * initial best-fit FCF. 2345 */ 2346 if (fcf_rec) { 2347 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2348 "2840 Update initial FCF candidate " 2349 "with FCF (x%x)\n", 2350 bf_get(lpfc_fcf_record_fcf_index, 2351 new_fcf_record)); 2352 __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, 2353 addr_mode, vlan_id, (boot_flag ? 2354 BOOT_ENABLE : 0)); 2355 phba->fcf.fcf_flag |= FCF_AVAILABLE; 2356 /* Setup initial running random FCF selection count */ 2357 phba->fcf.eligible_fcf_cnt = 1; 2358 /* Seeding the random number generator for random selection */ 2359 seed = (uint32_t)(0xFFFFFFFF & jiffies); 2360 srandom32(seed); 2361 } 2362 spin_unlock_irq(&phba->hbalock); 2363 goto read_next_fcf; 2364 2365 read_next_fcf: 2366 lpfc_sli4_mbox_cmd_free(phba, mboxq); 2367 if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0) { 2368 if (phba->fcf.fcf_flag & FCF_REDISC_FOV) { 2369 /* 2370 * Case of FCF fast failover scan 2371 */ 2372 2373 /* 2374 * It has not found any suitable FCF record, cancel 2375 * FCF scan inprogress, and do nothing 2376 */ 2377 if (!(phba->fcf.failover_rec.flag & RECORD_VALID)) { 2378 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, 2379 "2782 No suitable FCF found: " 2380 "(x%x/x%x)\n", 2381 phba->fcoe_eventtag_at_fcf_scan, 2382 bf_get(lpfc_fcf_record_fcf_index, 2383 new_fcf_record)); 2384 spin_lock_irq(&phba->hbalock); 2385 if (phba->hba_flag & HBA_DEVLOSS_TMO) { 2386 phba->hba_flag &= ~FCF_TS_INPROG; 2387 spin_unlock_irq(&phba->hbalock); 2388 /* Unregister in-use FCF and rescan */ 2389 lpfc_printf_log(phba, KERN_INFO, 2390 LOG_FIP, 2391 "2864 On devloss tmo " 2392 "unreg in-use FCF and " 2393 "rescan FCF table\n"); 2394 lpfc_unregister_fcf_rescan(phba); 2395 return; 2396 } 2397 /* 2398 * Let next new FCF event trigger fast failover 2399 */ 2400 phba->hba_flag &= ~FCF_TS_INPROG; 2401 spin_unlock_irq(&phba->hbalock); 2402 return; 2403 } 2404 /* 2405 * It has found a suitable FCF record that is not 2406 * the same as in-use FCF record, unregister the 2407 * in-use FCF record, replace the in-use FCF record 2408 * with the new FCF record, mark FCF fast failover 2409 * completed, and then start register the new FCF 2410 * record. 2411 */ 2412 2413 /* Unregister the current in-use FCF record */ 2414 lpfc_unregister_fcf(phba); 2415 2416 /* Replace in-use record with the new record */ 2417 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2418 "2842 Replace in-use FCF (x%x) " 2419 "with failover FCF (x%x)\n", 2420 phba->fcf.current_rec.fcf_indx, 2421 phba->fcf.failover_rec.fcf_indx); 2422 memcpy(&phba->fcf.current_rec, 2423 &phba->fcf.failover_rec, 2424 sizeof(struct lpfc_fcf_rec)); 2425 /* 2426 * Mark the fast FCF failover rediscovery completed 2427 * and the start of the first round of the roundrobin 2428 * FCF failover. 2429 */ 2430 spin_lock_irq(&phba->hbalock); 2431 phba->fcf.fcf_flag &= ~FCF_REDISC_FOV; 2432 spin_unlock_irq(&phba->hbalock); 2433 /* Register to the new FCF record */ 2434 lpfc_register_fcf(phba); 2435 } else { 2436 /* 2437 * In case of transaction period to fast FCF failover, 2438 * do nothing when search to the end of the FCF table. 2439 */ 2440 if ((phba->fcf.fcf_flag & FCF_REDISC_EVT) || 2441 (phba->fcf.fcf_flag & FCF_REDISC_PEND)) 2442 return; 2443 2444 if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV && 2445 phba->fcf.fcf_flag & FCF_IN_USE) { 2446 /* 2447 * In case the current in-use FCF record no 2448 * longer existed during FCF discovery that 2449 * was not triggered by fast FCF failover 2450 * process, treat it as fast FCF failover. 2451 */ 2452 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2453 "2841 In-use FCF record (x%x) " 2454 "not reported, entering fast " 2455 "FCF failover mode scanning.\n", 2456 phba->fcf.current_rec.fcf_indx); 2457 spin_lock_irq(&phba->hbalock); 2458 phba->fcf.fcf_flag |= FCF_REDISC_FOV; 2459 spin_unlock_irq(&phba->hbalock); 2460 lpfc_sli4_fcf_scan_read_fcf_rec(phba, 2461 LPFC_FCOE_FCF_GET_FIRST); 2462 return; 2463 } 2464 /* Register to the new FCF record */ 2465 lpfc_register_fcf(phba); 2466 } 2467 } else 2468 lpfc_sli4_fcf_scan_read_fcf_rec(phba, next_fcf_index); 2469 return; 2470 2471 out: 2472 lpfc_sli4_mbox_cmd_free(phba, mboxq); 2473 lpfc_register_fcf(phba); 2474 2475 return; 2476 } 2477 2478 /** 2479 * lpfc_mbx_cmpl_fcf_rr_read_fcf_rec - fcf roundrobin read_fcf mbox cmpl hdler 2480 * @phba: pointer to lpfc hba data structure. 2481 * @mboxq: pointer to mailbox object. 2482 * 2483 * This is the callback function for FLOGI failure roundrobin FCF failover 2484 * read FCF record mailbox command from the eligible FCF record bmask for 2485 * performing the failover. If the FCF read back is not valid/available, it 2486 * fails through to retrying FLOGI to the currently registered FCF again. 2487 * Otherwise, if the FCF read back is valid and available, it will set the 2488 * newly read FCF record to the failover FCF record, unregister currently 2489 * registered FCF record, copy the failover FCF record to the current 2490 * FCF record, and then register the current FCF record before proceeding 2491 * to trying FLOGI on the new failover FCF. 2492 */ 2493 void 2494 lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 2495 { 2496 struct fcf_record *new_fcf_record; 2497 uint32_t boot_flag, addr_mode; 2498 uint16_t next_fcf_index, fcf_index; 2499 uint16_t current_fcf_index; 2500 uint16_t vlan_id; 2501 int rc; 2502 2503 /* If link state is not up, stop the roundrobin failover process */ 2504 if (phba->link_state < LPFC_LINK_UP) { 2505 spin_lock_irq(&phba->hbalock); 2506 phba->fcf.fcf_flag &= ~FCF_DISCOVERY; 2507 phba->hba_flag &= ~FCF_RR_INPROG; 2508 spin_unlock_irq(&phba->hbalock); 2509 goto out; 2510 } 2511 2512 /* Parse the FCF record from the non-embedded mailbox command */ 2513 new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, 2514 &next_fcf_index); 2515 if (!new_fcf_record) { 2516 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, 2517 "2766 Mailbox command READ_FCF_RECORD " 2518 "failed to retrieve a FCF record.\n"); 2519 goto error_out; 2520 } 2521 2522 /* Get the needed parameters from FCF record */ 2523 rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, 2524 &addr_mode, &vlan_id); 2525 2526 /* Log the FCF record information if turned on */ 2527 lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, 2528 next_fcf_index); 2529 2530 fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); 2531 if (!rc) { 2532 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2533 "2848 Remove ineligible FCF (x%x) from " 2534 "from roundrobin bmask\n", fcf_index); 2535 /* Clear roundrobin bmask bit for ineligible FCF */ 2536 lpfc_sli4_fcf_rr_index_clear(phba, fcf_index); 2537 /* Perform next round of roundrobin FCF failover */ 2538 fcf_index = lpfc_sli4_fcf_rr_next_index_get(phba); 2539 rc = lpfc_sli4_fcf_rr_next_proc(phba->pport, fcf_index); 2540 if (rc) 2541 goto out; 2542 goto error_out; 2543 } 2544 2545 if (fcf_index == phba->fcf.current_rec.fcf_indx) { 2546 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2547 "2760 Perform FLOGI roundrobin FCF failover: " 2548 "FCF (x%x) back to FCF (x%x)\n", 2549 phba->fcf.current_rec.fcf_indx, fcf_index); 2550 /* Wait 500 ms before retrying FLOGI to current FCF */ 2551 msleep(500); 2552 lpfc_issue_init_vfi(phba->pport); 2553 goto out; 2554 } 2555 2556 /* Upload new FCF record to the failover FCF record */ 2557 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2558 "2834 Update current FCF (x%x) with new FCF (x%x)\n", 2559 phba->fcf.failover_rec.fcf_indx, fcf_index); 2560 spin_lock_irq(&phba->hbalock); 2561 __lpfc_update_fcf_record(phba, &phba->fcf.failover_rec, 2562 new_fcf_record, addr_mode, vlan_id, 2563 (boot_flag ? BOOT_ENABLE : 0)); 2564 spin_unlock_irq(&phba->hbalock); 2565 2566 current_fcf_index = phba->fcf.current_rec.fcf_indx; 2567 2568 /* Unregister the current in-use FCF record */ 2569 lpfc_unregister_fcf(phba); 2570 2571 /* Replace in-use record with the new record */ 2572 memcpy(&phba->fcf.current_rec, &phba->fcf.failover_rec, 2573 sizeof(struct lpfc_fcf_rec)); 2574 2575 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2576 "2783 Perform FLOGI roundrobin FCF failover: FCF " 2577 "(x%x) to FCF (x%x)\n", current_fcf_index, fcf_index); 2578 2579 error_out: 2580 lpfc_register_fcf(phba); 2581 out: 2582 lpfc_sli4_mbox_cmd_free(phba, mboxq); 2583 } 2584 2585 /** 2586 * lpfc_mbx_cmpl_read_fcf_rec - read fcf completion handler. 2587 * @phba: pointer to lpfc hba data structure. 2588 * @mboxq: pointer to mailbox object. 2589 * 2590 * This is the callback function of read FCF record mailbox command for 2591 * updating the eligible FCF bmask for FLOGI failure roundrobin FCF 2592 * failover when a new FCF event happened. If the FCF read back is 2593 * valid/available and it passes the connection list check, it updates 2594 * the bmask for the eligible FCF record for roundrobin failover. 2595 */ 2596 void 2597 lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 2598 { 2599 struct fcf_record *new_fcf_record; 2600 uint32_t boot_flag, addr_mode; 2601 uint16_t fcf_index, next_fcf_index; 2602 uint16_t vlan_id; 2603 int rc; 2604 2605 /* If link state is not up, no need to proceed */ 2606 if (phba->link_state < LPFC_LINK_UP) 2607 goto out; 2608 2609 /* If FCF discovery period is over, no need to proceed */ 2610 if (!(phba->fcf.fcf_flag & FCF_DISCOVERY)) 2611 goto out; 2612 2613 /* Parse the FCF record from the non-embedded mailbox command */ 2614 new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, 2615 &next_fcf_index); 2616 if (!new_fcf_record) { 2617 lpfc_printf_log(phba, KERN_INFO, LOG_FIP, 2618 "2767 Mailbox command READ_FCF_RECORD " 2619 "failed to retrieve a FCF record.\n"); 2620 goto out; 2621 } 2622 2623 /* Check the connection list for eligibility */ 2624 rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, 2625 &addr_mode, &vlan_id); 2626 2627 /* Log the FCF record information if turned on */ 2628 lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, 2629 next_fcf_index); 2630 2631 if (!rc) 2632 goto out; 2633 2634 /* Update the eligible FCF record index bmask */ 2635 fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); 2636 2637 rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index, new_fcf_record); 2638 2639 out: 2640 lpfc_sli4_mbox_cmd_free(phba, mboxq); 2641 } 2642 2643 /** 2644 * lpfc_init_vfi_cmpl - Completion handler for init_vfi mbox command. 2645 * @phba: pointer to lpfc hba data structure. 2646 * @mboxq: pointer to mailbox data structure. 2647 * 2648 * This function handles completion of init vfi mailbox command. 2649 */ 2650 void 2651 lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 2652 { 2653 struct lpfc_vport *vport = mboxq->vport; 2654 2655 /* 2656 * VFI not supported on interface type 0, just do the flogi 2657 * Also continue if the VFI is in use - just use the same one. 2658 */ 2659 if (mboxq->u.mb.mbxStatus && 2660 (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != 2661 LPFC_SLI_INTF_IF_TYPE_0) && 2662 mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) { 2663 lpfc_printf_vlog(vport, KERN_ERR, 2664 LOG_MBOX, 2665 "2891 Init VFI mailbox failed 0x%x\n", 2666 mboxq->u.mb.mbxStatus); 2667 mempool_free(mboxq, phba->mbox_mem_pool); 2668 lpfc_vport_set_state(vport, FC_VPORT_FAILED); 2669 return; 2670 } 2671 2672 lpfc_initial_flogi(vport); 2673 mempool_free(mboxq, phba->mbox_mem_pool); 2674 return; 2675 } 2676 2677 /** 2678 * lpfc_issue_init_vfi - Issue init_vfi mailbox command. 2679 * @vport: pointer to lpfc_vport data structure. 2680 * 2681 * This function issue a init_vfi mailbox command to initialize the VFI and 2682 * VPI for the physical port. 2683 */ 2684 void 2685 lpfc_issue_init_vfi(struct lpfc_vport *vport) 2686 { 2687 LPFC_MBOXQ_t *mboxq; 2688 int rc; 2689 struct lpfc_hba *phba = vport->phba; 2690 2691 mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 2692 if (!mboxq) { 2693 lpfc_printf_vlog(vport, KERN_ERR, 2694 LOG_MBOX, "2892 Failed to allocate " 2695 "init_vfi mailbox\n"); 2696 return; 2697 } 2698 lpfc_init_vfi(mboxq, vport); 2699 mboxq->mbox_cmpl = lpfc_init_vfi_cmpl; 2700 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT); 2701 if (rc == MBX_NOT_FINISHED) { 2702 lpfc_printf_vlog(vport, KERN_ERR, 2703 LOG_MBOX, "2893 Failed to issue init_vfi mailbox\n"); 2704 mempool_free(mboxq, vport->phba->mbox_mem_pool); 2705 } 2706 } 2707 2708 /** 2709 * lpfc_init_vpi_cmpl - Completion handler for init_vpi mbox command. 2710 * @phba: pointer to lpfc hba data structure. 2711 * @mboxq: pointer to mailbox data structure. 2712 * 2713 * This function handles completion of init vpi mailbox command. 2714 */ 2715 void 2716 lpfc_init_vpi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 2717 { 2718 struct lpfc_vport *vport = mboxq->vport; 2719 struct lpfc_nodelist *ndlp; 2720 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 2721 2722 if (mboxq->u.mb.mbxStatus) { 2723 lpfc_printf_vlog(vport, KERN_ERR, 2724 LOG_MBOX, 2725 "2609 Init VPI mailbox failed 0x%x\n", 2726 mboxq->u.mb.mbxStatus); 2727 mempool_free(mboxq, phba->mbox_mem_pool); 2728 lpfc_vport_set_state(vport, FC_VPORT_FAILED); 2729 return; 2730 } 2731 spin_lock_irq(shost->host_lock); 2732 vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI; 2733 spin_unlock_irq(shost->host_lock); 2734 2735 /* If this port is physical port or FDISC is done, do reg_vpi */ 2736 if ((phba->pport == vport) || (vport->port_state == LPFC_FDISC)) { 2737 ndlp = lpfc_findnode_did(vport, Fabric_DID); 2738 if (!ndlp) 2739 lpfc_printf_vlog(vport, KERN_ERR, 2740 LOG_DISCOVERY, 2741 "2731 Cannot find fabric " 2742 "controller node\n"); 2743 else 2744 lpfc_register_new_vport(phba, vport, ndlp); 2745 mempool_free(mboxq, phba->mbox_mem_pool); 2746 return; 2747 } 2748 2749 if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) 2750 lpfc_initial_fdisc(vport); 2751 else { 2752 lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); 2753 lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, 2754 "2606 No NPIV Fabric support\n"); 2755 } 2756 mempool_free(mboxq, phba->mbox_mem_pool); 2757 return; 2758 } 2759 2760 /** 2761 * lpfc_issue_init_vpi - Issue init_vpi mailbox command. 2762 * @vport: pointer to lpfc_vport data structure. 2763 * 2764 * This function issue a init_vpi mailbox command to initialize 2765 * VPI for the vport. 2766 */ 2767 void 2768 lpfc_issue_init_vpi(struct lpfc_vport *vport) 2769 { 2770 LPFC_MBOXQ_t *mboxq; 2771 int rc; 2772 2773 mboxq = mempool_alloc(vport->phba->mbox_mem_pool, GFP_KERNEL); 2774 if (!mboxq) { 2775 lpfc_printf_vlog(vport, KERN_ERR, 2776 LOG_MBOX, "2607 Failed to allocate " 2777 "init_vpi mailbox\n"); 2778 return; 2779 } 2780 lpfc_init_vpi(vport->phba, mboxq, vport->vpi); 2781 mboxq->vport = vport; 2782 mboxq->mbox_cmpl = lpfc_init_vpi_cmpl; 2783 rc = lpfc_sli_issue_mbox(vport->phba, mboxq, MBX_NOWAIT); 2784 if (rc == MBX_NOT_FINISHED) { 2785 lpfc_printf_vlog(vport, KERN_ERR, 2786 LOG_MBOX, "2608 Failed to issue init_vpi mailbox\n"); 2787 mempool_free(mboxq, vport->phba->mbox_mem_pool); 2788 } 2789 } 2790 2791 /** 2792 * lpfc_start_fdiscs - send fdiscs for each vports on this port. 2793 * @phba: pointer to lpfc hba data structure. 2794 * 2795 * This function loops through the list of vports on the @phba and issues an 2796 * FDISC if possible. 2797 */ 2798 void 2799 lpfc_start_fdiscs(struct lpfc_hba *phba) 2800 { 2801 struct lpfc_vport **vports; 2802 int i; 2803 2804 vports = lpfc_create_vport_work_array(phba); 2805 if (vports != NULL) { 2806 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { 2807 if (vports[i]->port_type == LPFC_PHYSICAL_PORT) 2808 continue; 2809 /* There are no vpi for this vport */ 2810 if (vports[i]->vpi > phba->max_vpi) { 2811 lpfc_vport_set_state(vports[i], 2812 FC_VPORT_FAILED); 2813 continue; 2814 } 2815 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { 2816 lpfc_vport_set_state(vports[i], 2817 FC_VPORT_LINKDOWN); 2818 continue; 2819 } 2820 if (vports[i]->fc_flag & FC_VPORT_NEEDS_INIT_VPI) { 2821 lpfc_issue_init_vpi(vports[i]); 2822 continue; 2823 } 2824 if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) 2825 lpfc_initial_fdisc(vports[i]); 2826 else { 2827 lpfc_vport_set_state(vports[i], 2828 FC_VPORT_NO_FABRIC_SUPP); 2829 lpfc_printf_vlog(vports[i], KERN_ERR, 2830 LOG_ELS, 2831 "0259 No NPIV " 2832 "Fabric support\n"); 2833 } 2834 } 2835 } 2836 lpfc_destroy_vport_work_array(phba, vports); 2837 } 2838 2839 void 2840 lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 2841 { 2842 struct lpfc_dmabuf *dmabuf = mboxq->context1; 2843 struct lpfc_vport *vport = mboxq->vport; 2844 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 2845 2846 /* 2847 * VFI not supported for interface type 0, so ignore any mailbox 2848 * error (except VFI in use) and continue with the discovery. 2849 */ 2850 if (mboxq->u.mb.mbxStatus && 2851 (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != 2852 LPFC_SLI_INTF_IF_TYPE_0) && 2853 mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) { 2854 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, 2855 "2018 REG_VFI mbxStatus error x%x " 2856 "HBA state x%x\n", 2857 mboxq->u.mb.mbxStatus, vport->port_state); 2858 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { 2859 /* FLOGI failed, use loop map to make discovery list */ 2860 lpfc_disc_list_loopmap(vport); 2861 /* Start discovery */ 2862 lpfc_disc_start(vport); 2863 goto out_free_mem; 2864 } 2865 lpfc_vport_set_state(vport, FC_VPORT_FAILED); 2866 goto out_free_mem; 2867 } 2868 /* The VPI is implicitly registered when the VFI is registered */ 2869 spin_lock_irq(shost->host_lock); 2870 vport->vpi_state |= LPFC_VPI_REGISTERED; 2871 vport->fc_flag |= FC_VFI_REGISTERED; 2872 vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; 2873 vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI; 2874 spin_unlock_irq(shost->host_lock); 2875 2876 /* In case SLI4 FC loopback test, we are ready */ 2877 if ((phba->sli_rev == LPFC_SLI_REV4) && 2878 (phba->link_flag & LS_LOOPBACK_MODE)) { 2879 phba->link_state = LPFC_HBA_READY; 2880 goto out_free_mem; 2881 } 2882 2883 if (vport->port_state == LPFC_FABRIC_CFG_LINK) { 2884 /* For private loop just start discovery and we are done. */ 2885 if ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) && 2886 !(vport->fc_flag & FC_PUBLIC_LOOP)) { 2887 /* Use loop map to make discovery list */ 2888 lpfc_disc_list_loopmap(vport); 2889 /* Start discovery */ 2890 lpfc_disc_start(vport); 2891 } else { 2892 lpfc_start_fdiscs(phba); 2893 lpfc_do_scr_ns_plogi(phba, vport); 2894 } 2895 } 2896 2897 out_free_mem: 2898 mempool_free(mboxq, phba->mbox_mem_pool); 2899 lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys); 2900 kfree(dmabuf); 2901 return; 2902 } 2903 2904 static void 2905 lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 2906 { 2907 MAILBOX_t *mb = &pmb->u.mb; 2908 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) pmb->context1; 2909 struct lpfc_vport *vport = pmb->vport; 2910 2911 2912 /* Check for error */ 2913 if (mb->mbxStatus) { 2914 /* READ_SPARAM mbox error <mbxStatus> state <hba_state> */ 2915 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, 2916 "0319 READ_SPARAM mbxStatus error x%x " 2917 "hba state x%x>\n", 2918 mb->mbxStatus, vport->port_state); 2919 lpfc_linkdown(phba); 2920 goto out; 2921 } 2922 2923 memcpy((uint8_t *) &vport->fc_sparam, (uint8_t *) mp->virt, 2924 sizeof (struct serv_parm)); 2925 lpfc_update_vport_wwn(vport); 2926 if (vport->port_type == LPFC_PHYSICAL_PORT) { 2927 memcpy(&phba->wwnn, &vport->fc_nodename, sizeof(phba->wwnn)); 2928 memcpy(&phba->wwpn, &vport->fc_portname, sizeof(phba->wwnn)); 2929 } 2930 2931 lpfc_mbuf_free(phba, mp->virt, mp->phys); 2932 kfree(mp); 2933 mempool_free(pmb, phba->mbox_mem_pool); 2934 return; 2935 2936 out: 2937 pmb->context1 = NULL; 2938 lpfc_mbuf_free(phba, mp->virt, mp->phys); 2939 kfree(mp); 2940 lpfc_issue_clear_la(phba, vport); 2941 mempool_free(pmb, phba->mbox_mem_pool); 2942 return; 2943 } 2944 2945 static void 2946 lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la) 2947 { 2948 struct lpfc_vport *vport = phba->pport; 2949 LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL; 2950 struct Scsi_Host *shost; 2951 int i; 2952 struct lpfc_dmabuf *mp; 2953 int rc; 2954 struct fcf_record *fcf_record; 2955 2956 spin_lock_irq(&phba->hbalock); 2957 switch (bf_get(lpfc_mbx_read_top_link_spd, la)) { 2958 case LPFC_LINK_SPEED_1GHZ: 2959 case LPFC_LINK_SPEED_2GHZ: 2960 case LPFC_LINK_SPEED_4GHZ: 2961 case LPFC_LINK_SPEED_8GHZ: 2962 case LPFC_LINK_SPEED_10GHZ: 2963 case LPFC_LINK_SPEED_16GHZ: 2964 phba->fc_linkspeed = bf_get(lpfc_mbx_read_top_link_spd, la); 2965 break; 2966 default: 2967 phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN; 2968 break; 2969 } 2970 2971 phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la); 2972 phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED; 2973 2974 shost = lpfc_shost_from_vport(vport); 2975 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { 2976 phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED; 2977 2978 /* if npiv is enabled and this adapter supports npiv log 2979 * a message that npiv is not supported in this topology 2980 */ 2981 if (phba->cfg_enable_npiv && phba->max_vpi) 2982 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, 2983 "1309 Link Up Event npiv not supported in loop " 2984 "topology\n"); 2985 /* Get Loop Map information */ 2986 if (bf_get(lpfc_mbx_read_top_il, la)) { 2987 spin_lock(shost->host_lock); 2988 vport->fc_flag |= FC_LBIT; 2989 spin_unlock(shost->host_lock); 2990 } 2991 2992 vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la); 2993 i = la->lilpBde64.tus.f.bdeSize; 2994 2995 if (i == 0) { 2996 phba->alpa_map[0] = 0; 2997 } else { 2998 if (vport->cfg_log_verbose & LOG_LINK_EVENT) { 2999 int numalpa, j, k; 3000 union { 3001 uint8_t pamap[16]; 3002 struct { 3003 uint32_t wd1; 3004 uint32_t wd2; 3005 uint32_t wd3; 3006 uint32_t wd4; 3007 } pa; 3008 } un; 3009 numalpa = phba->alpa_map[0]; 3010 j = 0; 3011 while (j < numalpa) { 3012 memset(un.pamap, 0, 16); 3013 for (k = 1; j < numalpa; k++) { 3014 un.pamap[k - 1] = 3015 phba->alpa_map[j + 1]; 3016 j++; 3017 if (k == 16) 3018 break; 3019 } 3020 /* Link Up Event ALPA map */ 3021 lpfc_printf_log(phba, 3022 KERN_WARNING, 3023 LOG_LINK_EVENT, 3024 "1304 Link Up Event " 3025 "ALPA map Data: x%x " 3026 "x%x x%x x%x\n", 3027 un.pa.wd1, un.pa.wd2, 3028 un.pa.wd3, un.pa.wd4); 3029 } 3030 } 3031 } 3032 } else { 3033 if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) { 3034 if (phba->max_vpi && phba->cfg_enable_npiv && 3035 (phba->sli_rev >= LPFC_SLI_REV3)) 3036 phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED; 3037 } 3038 vport->fc_myDID = phba->fc_pref_DID; 3039 spin_lock(shost->host_lock); 3040 vport->fc_flag |= FC_LBIT; 3041 spin_unlock(shost->host_lock); 3042 } 3043 spin_unlock_irq(&phba->hbalock); 3044 3045 lpfc_linkup(phba); 3046 sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 3047 if (!sparam_mbox) 3048 goto out; 3049 3050 rc = lpfc_read_sparam(phba, sparam_mbox, 0); 3051 if (rc) { 3052 mempool_free(sparam_mbox, phba->mbox_mem_pool); 3053 goto out; 3054 } 3055 sparam_mbox->vport = vport; 3056 sparam_mbox->mbox_cmpl = lpfc_mbx_cmpl_read_sparam; 3057 rc = lpfc_sli_issue_mbox(phba, sparam_mbox, MBX_NOWAIT); 3058 if (rc == MBX_NOT_FINISHED) { 3059 mp = (struct lpfc_dmabuf *) sparam_mbox->context1; 3060 lpfc_mbuf_free(phba, mp->virt, mp->phys); 3061 kfree(mp); 3062 mempool_free(sparam_mbox, phba->mbox_mem_pool); 3063 goto out; 3064 } 3065 3066 if (!(phba->hba_flag & HBA_FCOE_MODE)) { 3067 cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 3068 if (!cfglink_mbox) 3069 goto out; 3070 vport->port_state = LPFC_LOCAL_CFG_LINK; 3071 lpfc_config_link(phba, cfglink_mbox); 3072 cfglink_mbox->vport = vport; 3073 cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link; 3074 rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT); 3075 if (rc == MBX_NOT_FINISHED) { 3076 mempool_free(cfglink_mbox, phba->mbox_mem_pool); 3077 goto out; 3078 } 3079 } else { 3080 vport->port_state = LPFC_VPORT_UNKNOWN; 3081 /* 3082 * Add the driver's default FCF record at FCF index 0 now. This 3083 * is phase 1 implementation that support FCF index 0 and driver 3084 * defaults. 3085 */ 3086 if (!(phba->hba_flag & HBA_FIP_SUPPORT)) { 3087 fcf_record = kzalloc(sizeof(struct fcf_record), 3088 GFP_KERNEL); 3089 if (unlikely(!fcf_record)) { 3090 lpfc_printf_log(phba, KERN_ERR, 3091 LOG_MBOX | LOG_SLI, 3092 "2554 Could not allocate memory for " 3093 "fcf record\n"); 3094 rc = -ENODEV; 3095 goto out; 3096 } 3097 3098 lpfc_sli4_build_dflt_fcf_record(phba, fcf_record, 3099 LPFC_FCOE_FCF_DEF_INDEX); 3100 rc = lpfc_sli4_add_fcf_record(phba, fcf_record); 3101 if (unlikely(rc)) { 3102 lpfc_printf_log(phba, KERN_ERR, 3103 LOG_MBOX | LOG_SLI, 3104 "2013 Could not manually add FCF " 3105 "record 0, status %d\n", rc); 3106 rc = -ENODEV; 3107 kfree(fcf_record); 3108 goto out; 3109 } 3110 kfree(fcf_record); 3111 } 3112 /* 3113 * The driver is expected to do FIP/FCF. Call the port 3114 * and get the FCF Table. 3115 */ 3116 spin_lock_irq(&phba->hbalock); 3117 if (phba->hba_flag & FCF_TS_INPROG) { 3118 spin_unlock_irq(&phba->hbalock); 3119 return; 3120 } 3121 /* This is the initial FCF discovery scan */ 3122 phba->fcf.fcf_flag |= FCF_INIT_DISC; 3123 spin_unlock_irq(&phba->hbalock); 3124 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, 3125 "2778 Start FCF table scan at linkup\n"); 3126 rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, 3127 LPFC_FCOE_FCF_GET_FIRST); 3128 if (rc) { 3129 spin_lock_irq(&phba->hbalock); 3130 phba->fcf.fcf_flag &= ~FCF_INIT_DISC; 3131 spin_unlock_irq(&phba->hbalock); 3132 goto out; 3133 } 3134 /* Reset FCF roundrobin bmask for new discovery */ 3135 lpfc_sli4_clear_fcf_rr_bmask(phba); 3136 } 3137 3138 return; 3139 out: 3140 lpfc_vport_set_state(vport, FC_VPORT_FAILED); 3141 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, 3142 "0263 Discovery Mailbox error: state: 0x%x : %p %p\n", 3143 vport->port_state, sparam_mbox, cfglink_mbox); 3144 lpfc_issue_clear_la(phba, vport); 3145 return; 3146 } 3147 3148 static void 3149 lpfc_enable_la(struct lpfc_hba *phba) 3150 { 3151 uint32_t control; 3152 struct lpfc_sli *psli = &phba->sli; 3153 spin_lock_irq(&phba->hbalock); 3154 psli->sli_flag |= LPFC_PROCESS_LA; 3155 if (phba->sli_rev <= LPFC_SLI_REV3) { 3156 control = readl(phba->HCregaddr); 3157 control |= HC_LAINT_ENA; 3158 writel(control, phba->HCregaddr); 3159 readl(phba->HCregaddr); /* flush */ 3160 } 3161 spin_unlock_irq(&phba->hbalock); 3162 } 3163 3164 static void 3165 lpfc_mbx_issue_link_down(struct lpfc_hba *phba) 3166 { 3167 lpfc_linkdown(phba); 3168 lpfc_enable_la(phba); 3169 lpfc_unregister_unused_fcf(phba); 3170 /* turn on Link Attention interrupts - no CLEAR_LA needed */ 3171 } 3172 3173 3174 /* 3175 * This routine handles processing a READ_TOPOLOGY mailbox 3176 * command upon completion. It is setup in the LPFC_MBOXQ 3177 * as the completion routine when the command is 3178 * handed off to the SLI layer. 3179 */ 3180 void 3181 lpfc_mbx_cmpl_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 3182 { 3183 struct lpfc_vport *vport = pmb->vport; 3184 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 3185 struct lpfc_mbx_read_top *la; 3186 MAILBOX_t *mb = &pmb->u.mb; 3187 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1); 3188 3189 /* Unblock ELS traffic */ 3190 phba->sli.ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT; 3191 /* Check for error */ 3192 if (mb->mbxStatus) { 3193 lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, 3194 "1307 READ_LA mbox error x%x state x%x\n", 3195 mb->mbxStatus, vport->port_state); 3196 lpfc_mbx_issue_link_down(phba); 3197 phba->link_state = LPFC_HBA_ERROR; 3198 goto lpfc_mbx_cmpl_read_topology_free_mbuf; 3199 } 3200 3201 la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop; 3202 3203 memcpy(&phba->alpa_map[0], mp->virt, 128); 3204 3205 spin_lock_irq(shost->host_lock); 3206 if (bf_get(lpfc_mbx_read_top_pb, la)) 3207 vport->fc_flag |= FC_BYPASSED_MODE; 3208 else 3209 vport->fc_flag &= ~FC_BYPASSED_MODE; 3210 spin_unlock_irq(shost->host_lock); 3211 3212 if ((phba->fc_eventTag < la->eventTag) || 3213 (phba->fc_eventTag == la->eventTag)) { 3214 phba->fc_stat.LinkMultiEvent++; 3215 if (bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP) 3216 if (phba->fc_eventTag != 0) 3217 lpfc_linkdown(phba); 3218 } 3219 3220 phba->fc_eventTag = la->eventTag; 3221 spin_lock_irq(&phba->hbalock); 3222 if (bf_get(lpfc_mbx_read_top_mm, la)) 3223 phba->sli.sli_flag |= LPFC_MENLO_MAINT; 3224 else 3225 phba->sli.sli_flag &= ~LPFC_MENLO_MAINT; 3226 spin_unlock_irq(&phba->hbalock); 3227 3228 phba->link_events++; 3229 if ((bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP) && 3230 (!bf_get(lpfc_mbx_read_top_mm, la))) { 3231 phba->fc_stat.LinkUp++; 3232 if (phba->link_flag & LS_LOOPBACK_MODE) { 3233 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, 3234 "1306 Link Up Event in loop back mode " 3235 "x%x received Data: x%x x%x x%x x%x\n", 3236 la->eventTag, phba->fc_eventTag, 3237 bf_get(lpfc_mbx_read_top_alpa_granted, 3238 la), 3239 bf_get(lpfc_mbx_read_top_link_spd, la), 3240 phba->alpa_map[0]); 3241 } else { 3242 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, 3243 "1303 Link Up Event x%x received " 3244 "Data: x%x x%x x%x x%x x%x x%x %d\n", 3245 la->eventTag, phba->fc_eventTag, 3246 bf_get(lpfc_mbx_read_top_alpa_granted, 3247 la), 3248 bf_get(lpfc_mbx_read_top_link_spd, la), 3249 phba->alpa_map[0], 3250 bf_get(lpfc_mbx_read_top_mm, la), 3251 bf_get(lpfc_mbx_read_top_fa, la), 3252 phba->wait_4_mlo_maint_flg); 3253 } 3254 lpfc_mbx_process_link_up(phba, la); 3255 } else if (bf_get(lpfc_mbx_read_top_att_type, la) == 3256 LPFC_ATT_LINK_DOWN) { 3257 phba->fc_stat.LinkDown++; 3258 if (phba->link_flag & LS_LOOPBACK_MODE) 3259 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, 3260 "1308 Link Down Event in loop back mode " 3261 "x%x received " 3262 "Data: x%x x%x x%x\n", 3263 la->eventTag, phba->fc_eventTag, 3264 phba->pport->port_state, vport->fc_flag); 3265 else 3266 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, 3267 "1305 Link Down Event x%x received " 3268 "Data: x%x x%x x%x x%x x%x\n", 3269 la->eventTag, phba->fc_eventTag, 3270 phba->pport->port_state, vport->fc_flag, 3271 bf_get(lpfc_mbx_read_top_mm, la), 3272 bf_get(lpfc_mbx_read_top_fa, la)); 3273 lpfc_mbx_issue_link_down(phba); 3274 } 3275 if ((bf_get(lpfc_mbx_read_top_mm, la)) && 3276 (bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP)) { 3277 if (phba->link_state != LPFC_LINK_DOWN) { 3278 phba->fc_stat.LinkDown++; 3279 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, 3280 "1312 Link Down Event x%x received " 3281 "Data: x%x x%x x%x\n", 3282 la->eventTag, phba->fc_eventTag, 3283 phba->pport->port_state, vport->fc_flag); 3284 lpfc_mbx_issue_link_down(phba); 3285 } else 3286 lpfc_enable_la(phba); 3287 3288 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, 3289 "1310 Menlo Maint Mode Link up Event x%x rcvd " 3290 "Data: x%x x%x x%x\n", 3291 la->eventTag, phba->fc_eventTag, 3292 phba->pport->port_state, vport->fc_flag); 3293 /* 3294 * The cmnd that triggered this will be waiting for this 3295 * signal. 3296 */ 3297 /* WAKEUP for MENLO_SET_MODE or MENLO_RESET command. */ 3298 if (phba->wait_4_mlo_maint_flg) { 3299 phba->wait_4_mlo_maint_flg = 0; 3300 wake_up_interruptible(&phba->wait_4_mlo_m_q); 3301 } 3302 } 3303 3304 if (bf_get(lpfc_mbx_read_top_fa, la)) { 3305 if (bf_get(lpfc_mbx_read_top_mm, la)) 3306 lpfc_issue_clear_la(phba, vport); 3307 lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, 3308 "1311 fa %d\n", 3309 bf_get(lpfc_mbx_read_top_fa, la)); 3310 } 3311 3312 lpfc_mbx_cmpl_read_topology_free_mbuf: 3313 lpfc_mbuf_free(phba, mp->virt, mp->phys); 3314 kfree(mp); 3315 mempool_free(pmb, phba->mbox_mem_pool); 3316 return; 3317 } 3318 3319 /* 3320 * This routine handles processing a REG_LOGIN mailbox 3321 * command upon completion. It is setup in the LPFC_MBOXQ 3322 * as the completion routine when the command is 3323 * handed off to the SLI layer. 3324 */ 3325 void 3326 lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 3327 { 3328 struct lpfc_vport *vport = pmb->vport; 3329 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1); 3330 struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2; 3331 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 3332 3333 pmb->context1 = NULL; 3334 pmb->context2 = NULL; 3335 3336 if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND) 3337 ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND; 3338 3339 if (ndlp->nlp_flag & NLP_IGNR_REG_CMPL || 3340 ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) { 3341 /* We rcvd a rscn after issuing this 3342 * mbox reg login, we may have cycled 3343 * back through the state and be 3344 * back at reg login state so this 3345 * mbox needs to be ignored becase 3346 * there is another reg login in 3347 * process. 3348 */ 3349 spin_lock_irq(shost->host_lock); 3350 ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL; 3351 spin_unlock_irq(shost->host_lock); 3352 } else 3353 /* Good status, call state machine */ 3354 lpfc_disc_state_machine(vport, ndlp, pmb, 3355 NLP_EVT_CMPL_REG_LOGIN); 3356 3357 lpfc_mbuf_free(phba, mp->virt, mp->phys); 3358 kfree(mp); 3359 mempool_free(pmb, phba->mbox_mem_pool); 3360 /* decrement the node reference count held for this callback 3361 * function. 3362 */ 3363 lpfc_nlp_put(ndlp); 3364 3365 return; 3366 } 3367 3368 static void 3369 lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 3370 { 3371 MAILBOX_t *mb = &pmb->u.mb; 3372 struct lpfc_vport *vport = pmb->vport; 3373 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 3374 3375 switch (mb->mbxStatus) { 3376 case 0x0011: 3377 case 0x0020: 3378 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, 3379 "0911 cmpl_unreg_vpi, mb status = 0x%x\n", 3380 mb->mbxStatus); 3381 break; 3382 /* If VPI is busy, reset the HBA */ 3383 case 0x9700: 3384 lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, 3385 "2798 Unreg_vpi failed vpi 0x%x, mb status = 0x%x\n", 3386 vport->vpi, mb->mbxStatus); 3387 if (!(phba->pport->load_flag & FC_UNLOADING)) 3388 lpfc_workq_post_event(phba, NULL, NULL, 3389 LPFC_EVT_RESET_HBA); 3390 } 3391 spin_lock_irq(shost->host_lock); 3392 vport->vpi_state &= ~LPFC_VPI_REGISTERED; 3393 vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; 3394 spin_unlock_irq(shost->host_lock); 3395 vport->unreg_vpi_cmpl = VPORT_OK; 3396 mempool_free(pmb, phba->mbox_mem_pool); 3397 lpfc_cleanup_vports_rrqs(vport, NULL); 3398 /* 3399 * This shost reference might have been taken at the beginning of 3400 * lpfc_vport_delete() 3401 */ 3402 if ((vport->load_flag & FC_UNLOADING) && (vport != phba->pport)) 3403 scsi_host_put(shost); 3404 } 3405 3406 int 3407 lpfc_mbx_unreg_vpi(struct lpfc_vport *vport) 3408 { 3409 struct lpfc_hba *phba = vport->phba; 3410 LPFC_MBOXQ_t *mbox; 3411 int rc; 3412 3413 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 3414 if (!mbox) 3415 return 1; 3416 3417 lpfc_unreg_vpi(phba, vport->vpi, mbox); 3418 mbox->vport = vport; 3419 mbox->mbox_cmpl = lpfc_mbx_cmpl_unreg_vpi; 3420 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); 3421 if (rc == MBX_NOT_FINISHED) { 3422 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, 3423 "1800 Could not issue unreg_vpi\n"); 3424 mempool_free(mbox, phba->mbox_mem_pool); 3425 vport->unreg_vpi_cmpl = VPORT_ERROR; 3426 return rc; 3427 } 3428 return 0; 3429 } 3430 3431 static void 3432 lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 3433 { 3434 struct lpfc_vport *vport = pmb->vport; 3435 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 3436 MAILBOX_t *mb = &pmb->u.mb; 3437 3438 switch (mb->mbxStatus) { 3439 case 0x0011: 3440 case 0x9601: 3441 case 0x9602: 3442 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, 3443 "0912 cmpl_reg_vpi, mb status = 0x%x\n", 3444 mb->mbxStatus); 3445 lpfc_vport_set_state(vport, FC_VPORT_FAILED); 3446 spin_lock_irq(shost->host_lock); 3447 vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP); 3448 spin_unlock_irq(shost->host_lock); 3449 vport->fc_myDID = 0; 3450 goto out; 3451 } 3452 3453 spin_lock_irq(shost->host_lock); 3454 vport->vpi_state |= LPFC_VPI_REGISTERED; 3455 vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; 3456 spin_unlock_irq(shost->host_lock); 3457 vport->num_disc_nodes = 0; 3458 /* go thru NPR list and issue ELS PLOGIs */ 3459 if (vport->fc_npr_cnt) 3460 lpfc_els_disc_plogi(vport); 3461 3462 if (!vport->num_disc_nodes) { 3463 spin_lock_irq(shost->host_lock); 3464 vport->fc_flag &= ~FC_NDISC_ACTIVE; 3465 spin_unlock_irq(shost->host_lock); 3466 lpfc_can_disctmo(vport); 3467 } 3468 vport->port_state = LPFC_VPORT_READY; 3469 3470 out: 3471 mempool_free(pmb, phba->mbox_mem_pool); 3472 return; 3473 } 3474 3475 /** 3476 * lpfc_create_static_vport - Read HBA config region to create static vports. 3477 * @phba: pointer to lpfc hba data structure. 3478 * 3479 * This routine issue a DUMP mailbox command for config region 22 to get 3480 * the list of static vports to be created. The function create vports 3481 * based on the information returned from the HBA. 3482 **/ 3483 void 3484 lpfc_create_static_vport(struct lpfc_hba *phba) 3485 { 3486 LPFC_MBOXQ_t *pmb = NULL; 3487 MAILBOX_t *mb; 3488 struct static_vport_info *vport_info; 3489 int rc = 0, i; 3490 struct fc_vport_identifiers vport_id; 3491 struct fc_vport *new_fc_vport; 3492 struct Scsi_Host *shost; 3493 struct lpfc_vport *vport; 3494 uint16_t offset = 0; 3495 uint8_t *vport_buff; 3496 struct lpfc_dmabuf *mp; 3497 uint32_t byte_count = 0; 3498 3499 pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 3500 if (!pmb) { 3501 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 3502 "0542 lpfc_create_static_vport failed to" 3503 " allocate mailbox memory\n"); 3504 return; 3505 } 3506 3507 mb = &pmb->u.mb; 3508 3509 vport_info = kzalloc(sizeof(struct static_vport_info), GFP_KERNEL); 3510 if (!vport_info) { 3511 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 3512 "0543 lpfc_create_static_vport failed to" 3513 " allocate vport_info\n"); 3514 mempool_free(pmb, phba->mbox_mem_pool); 3515 return; 3516 } 3517 3518 vport_buff = (uint8_t *) vport_info; 3519 do { 3520 if (lpfc_dump_static_vport(phba, pmb, offset)) 3521 goto out; 3522 3523 pmb->vport = phba->pport; 3524 rc = lpfc_sli_issue_mbox_wait(phba, pmb, LPFC_MBOX_TMO); 3525 3526 if ((rc != MBX_SUCCESS) || mb->mbxStatus) { 3527 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, 3528 "0544 lpfc_create_static_vport failed to" 3529 " issue dump mailbox command ret 0x%x " 3530 "status 0x%x\n", 3531 rc, mb->mbxStatus); 3532 goto out; 3533 } 3534 3535 if (phba->sli_rev == LPFC_SLI_REV4) { 3536 byte_count = pmb->u.mqe.un.mb_words[5]; 3537 mp = (struct lpfc_dmabuf *) pmb->context2; 3538 if (byte_count > sizeof(struct static_vport_info) - 3539 offset) 3540 byte_count = sizeof(struct static_vport_info) 3541 - offset; 3542 memcpy(vport_buff + offset, mp->virt, byte_count); 3543 offset += byte_count; 3544 } else { 3545 if (mb->un.varDmp.word_cnt > 3546 sizeof(struct static_vport_info) - offset) 3547 mb->un.varDmp.word_cnt = 3548 sizeof(struct static_vport_info) 3549 - offset; 3550 byte_count = mb->un.varDmp.word_cnt; 3551 lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET, 3552 vport_buff + offset, 3553 byte_count); 3554 3555 offset += byte_count; 3556 } 3557 3558 } while (byte_count && 3559 offset < sizeof(struct static_vport_info)); 3560 3561 3562 if ((le32_to_cpu(vport_info->signature) != VPORT_INFO_SIG) || 3563 ((le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK) 3564 != VPORT_INFO_REV)) { 3565 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 3566 "0545 lpfc_create_static_vport bad" 3567 " information header 0x%x 0x%x\n", 3568 le32_to_cpu(vport_info->signature), 3569 le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK); 3570 3571 goto out; 3572 } 3573 3574 shost = lpfc_shost_from_vport(phba->pport); 3575 3576 for (i = 0; i < MAX_STATIC_VPORT_COUNT; i++) { 3577 memset(&vport_id, 0, sizeof(vport_id)); 3578 vport_id.port_name = wwn_to_u64(vport_info->vport_list[i].wwpn); 3579 vport_id.node_name = wwn_to_u64(vport_info->vport_list[i].wwnn); 3580 if (!vport_id.port_name || !vport_id.node_name) 3581 continue; 3582 3583 vport_id.roles = FC_PORT_ROLE_FCP_INITIATOR; 3584 vport_id.vport_type = FC_PORTTYPE_NPIV; 3585 vport_id.disable = false; 3586 new_fc_vport = fc_vport_create(shost, 0, &vport_id); 3587 3588 if (!new_fc_vport) { 3589 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, 3590 "0546 lpfc_create_static_vport failed to" 3591 " create vport\n"); 3592 continue; 3593 } 3594 3595 vport = *(struct lpfc_vport **)new_fc_vport->dd_data; 3596 vport->vport_flag |= STATIC_VPORT; 3597 } 3598 3599 out: 3600 kfree(vport_info); 3601 if (rc != MBX_TIMEOUT) { 3602 if (pmb->context2) { 3603 mp = (struct lpfc_dmabuf *) pmb->context2; 3604 lpfc_mbuf_free(phba, mp->virt, mp->phys); 3605 kfree(mp); 3606 } 3607 mempool_free(pmb, phba->mbox_mem_pool); 3608 } 3609 3610 return; 3611 } 3612 3613 /* 3614 * This routine handles processing a Fabric REG_LOGIN mailbox 3615 * command upon completion. It is setup in the LPFC_MBOXQ 3616 * as the completion routine when the command is 3617 * handed off to the SLI layer. 3618 */ 3619 void 3620 lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 3621 { 3622 struct lpfc_vport *vport = pmb->vport; 3623 MAILBOX_t *mb = &pmb->u.mb; 3624 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1); 3625 struct lpfc_nodelist *ndlp; 3626 struct Scsi_Host *shost; 3627 3628 ndlp = (struct lpfc_nodelist *) pmb->context2; 3629 pmb->context1 = NULL; 3630 pmb->context2 = NULL; 3631 3632 if (mb->mbxStatus) { 3633 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, 3634 "0258 Register Fabric login error: 0x%x\n", 3635 mb->mbxStatus); 3636 lpfc_mbuf_free(phba, mp->virt, mp->phys); 3637 kfree(mp); 3638 mempool_free(pmb, phba->mbox_mem_pool); 3639 3640 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { 3641 /* FLOGI failed, use loop map to make discovery list */ 3642 lpfc_disc_list_loopmap(vport); 3643 3644 /* Start discovery */ 3645 lpfc_disc_start(vport); 3646 /* Decrement the reference count to ndlp after the 3647 * reference to the ndlp are done. 3648 */ 3649 lpfc_nlp_put(ndlp); 3650 return; 3651 } 3652 3653 lpfc_vport_set_state(vport, FC_VPORT_FAILED); 3654 /* Decrement the reference count to ndlp after the reference 3655 * to the ndlp are done. 3656 */ 3657 lpfc_nlp_put(ndlp); 3658 return; 3659 } 3660 3661 if (phba->sli_rev < LPFC_SLI_REV4) 3662 ndlp->nlp_rpi = mb->un.varWords[0]; 3663 ndlp->nlp_flag |= NLP_RPI_REGISTERED; 3664 ndlp->nlp_type |= NLP_FABRIC; 3665 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); 3666 3667 if (vport->port_state == LPFC_FABRIC_CFG_LINK) { 3668 /* when physical port receive logo donot start 3669 * vport discovery */ 3670 if (!(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG)) 3671 lpfc_start_fdiscs(phba); 3672 else { 3673 shost = lpfc_shost_from_vport(vport); 3674 spin_lock_irq(shost->host_lock); 3675 vport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG ; 3676 spin_unlock_irq(shost->host_lock); 3677 } 3678 lpfc_do_scr_ns_plogi(phba, vport); 3679 } 3680 3681 lpfc_mbuf_free(phba, mp->virt, mp->phys); 3682 kfree(mp); 3683 mempool_free(pmb, phba->mbox_mem_pool); 3684 3685 /* Drop the reference count from the mbox at the end after 3686 * all the current reference to the ndlp have been done. 3687 */ 3688 lpfc_nlp_put(ndlp); 3689 return; 3690 } 3691 3692 /* 3693 * This routine handles processing a NameServer REG_LOGIN mailbox 3694 * command upon completion. It is setup in the LPFC_MBOXQ 3695 * as the completion routine when the command is 3696 * handed off to the SLI layer. 3697 */ 3698 void 3699 lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 3700 { 3701 MAILBOX_t *mb = &pmb->u.mb; 3702 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1); 3703 struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2; 3704 struct lpfc_vport *vport = pmb->vport; 3705 3706 pmb->context1 = NULL; 3707 pmb->context2 = NULL; 3708 3709 if (mb->mbxStatus) { 3710 out: 3711 lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, 3712 "0260 Register NameServer error: 0x%x\n", 3713 mb->mbxStatus); 3714 /* decrement the node reference count held for this 3715 * callback function. 3716 */ 3717 lpfc_nlp_put(ndlp); 3718 lpfc_mbuf_free(phba, mp->virt, mp->phys); 3719 kfree(mp); 3720 mempool_free(pmb, phba->mbox_mem_pool); 3721 3722 /* If no other thread is using the ndlp, free it */ 3723 lpfc_nlp_not_used(ndlp); 3724 3725 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { 3726 /* 3727 * RegLogin failed, use loop map to make discovery 3728 * list 3729 */ 3730 lpfc_disc_list_loopmap(vport); 3731 3732 /* Start discovery */ 3733 lpfc_disc_start(vport); 3734 return; 3735 } 3736 lpfc_vport_set_state(vport, FC_VPORT_FAILED); 3737 return; 3738 } 3739 3740 if (phba->sli_rev < LPFC_SLI_REV4) 3741 ndlp->nlp_rpi = mb->un.varWords[0]; 3742 ndlp->nlp_flag |= NLP_RPI_REGISTERED; 3743 ndlp->nlp_type |= NLP_FABRIC; 3744 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); 3745 3746 if (vport->port_state < LPFC_VPORT_READY) { 3747 /* Link up discovery requires Fabric registration. */ 3748 lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0, 0); /* Do this first! */ 3749 lpfc_ns_cmd(vport, SLI_CTNS_RNN_ID, 0, 0); 3750 lpfc_ns_cmd(vport, SLI_CTNS_RSNN_NN, 0, 0); 3751 lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0); 3752 lpfc_ns_cmd(vport, SLI_CTNS_RFT_ID, 0, 0); 3753 3754 /* Issue SCR just before NameServer GID_FT Query */ 3755 lpfc_issue_els_scr(vport, SCR_DID, 0); 3756 } 3757 3758 vport->fc_ns_retry = 0; 3759 /* Good status, issue CT Request to NameServer */ 3760 if (lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, 0, 0)) { 3761 /* Cannot issue NameServer Query, so finish up discovery */ 3762 goto out; 3763 } 3764 3765 /* decrement the node reference count held for this 3766 * callback function. 3767 */ 3768 lpfc_nlp_put(ndlp); 3769 lpfc_mbuf_free(phba, mp->virt, mp->phys); 3770 kfree(mp); 3771 mempool_free(pmb, phba->mbox_mem_pool); 3772 3773 return; 3774 } 3775 3776 static void 3777 lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) 3778 { 3779 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 3780 struct fc_rport *rport; 3781 struct lpfc_rport_data *rdata; 3782 struct fc_rport_identifiers rport_ids; 3783 struct lpfc_hba *phba = vport->phba; 3784 3785 /* Remote port has reappeared. Re-register w/ FC transport */ 3786 rport_ids.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn); 3787 rport_ids.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn); 3788 rport_ids.port_id = ndlp->nlp_DID; 3789 rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; 3790 3791 /* 3792 * We leave our node pointer in rport->dd_data when we unregister a 3793 * FCP target port. But fc_remote_port_add zeros the space to which 3794 * rport->dd_data points. So, if we're reusing a previously 3795 * registered port, drop the reference that we took the last time we 3796 * registered the port. 3797 */ 3798 if (ndlp->rport && ndlp->rport->dd_data && 3799 ((struct lpfc_rport_data *) ndlp->rport->dd_data)->pnode == ndlp) 3800 lpfc_nlp_put(ndlp); 3801 3802 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, 3803 "rport add: did:x%x flg:x%x type x%x", 3804 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); 3805 3806 /* Don't add the remote port if unloading. */ 3807 if (vport->load_flag & FC_UNLOADING) 3808 return; 3809 3810 ndlp->rport = rport = fc_remote_port_add(shost, 0, &rport_ids); 3811 if (!rport || !get_device(&rport->dev)) { 3812 dev_printk(KERN_WARNING, &phba->pcidev->dev, 3813 "Warning: fc_remote_port_add failed\n"); 3814 return; 3815 } 3816 3817 /* initialize static port data */ 3818 rport->maxframe_size = ndlp->nlp_maxframe; 3819 rport->supported_classes = ndlp->nlp_class_sup; 3820 rdata = rport->dd_data; 3821 rdata->pnode = lpfc_nlp_get(ndlp); 3822 3823 if (ndlp->nlp_type & NLP_FCP_TARGET) 3824 rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET; 3825 if (ndlp->nlp_type & NLP_FCP_INITIATOR) 3826 rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR; 3827 3828 if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN) 3829 fc_remote_port_rolechg(rport, rport_ids.roles); 3830 3831 if ((rport->scsi_target_id != -1) && 3832 (rport->scsi_target_id < LPFC_MAX_TARGET)) { 3833 ndlp->nlp_sid = rport->scsi_target_id; 3834 } 3835 return; 3836 } 3837 3838 static void 3839 lpfc_unregister_remote_port(struct lpfc_nodelist *ndlp) 3840 { 3841 struct fc_rport *rport = ndlp->rport; 3842 3843 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT, 3844 "rport delete: did:x%x flg:x%x type x%x", 3845 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); 3846 3847 fc_remote_port_delete(rport); 3848 3849 return; 3850 } 3851 3852 static void 3853 lpfc_nlp_counters(struct lpfc_vport *vport, int state, int count) 3854 { 3855 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 3856 3857 spin_lock_irq(shost->host_lock); 3858 switch (state) { 3859 case NLP_STE_UNUSED_NODE: 3860 vport->fc_unused_cnt += count; 3861 break; 3862 case NLP_STE_PLOGI_ISSUE: 3863 vport->fc_plogi_cnt += count; 3864 break; 3865 case NLP_STE_ADISC_ISSUE: 3866 vport->fc_adisc_cnt += count; 3867 break; 3868 case NLP_STE_REG_LOGIN_ISSUE: 3869 vport->fc_reglogin_cnt += count; 3870 break; 3871 case NLP_STE_PRLI_ISSUE: 3872 vport->fc_prli_cnt += count; 3873 break; 3874 case NLP_STE_UNMAPPED_NODE: 3875 vport->fc_unmap_cnt += count; 3876 break; 3877 case NLP_STE_MAPPED_NODE: 3878 vport->fc_map_cnt += count; 3879 break; 3880 case NLP_STE_NPR_NODE: 3881 vport->fc_npr_cnt += count; 3882 break; 3883 } 3884 spin_unlock_irq(shost->host_lock); 3885 } 3886 3887 static void 3888 lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, 3889 int old_state, int new_state) 3890 { 3891 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 3892 3893 if (new_state == NLP_STE_UNMAPPED_NODE) { 3894 ndlp->nlp_flag &= ~NLP_NODEV_REMOVE; 3895 ndlp->nlp_type |= NLP_FC_NODE; 3896 } 3897 if (new_state == NLP_STE_MAPPED_NODE) 3898 ndlp->nlp_flag &= ~NLP_NODEV_REMOVE; 3899 if (new_state == NLP_STE_NPR_NODE) 3900 ndlp->nlp_flag &= ~NLP_RCV_PLOGI; 3901 3902 /* Transport interface */ 3903 if (ndlp->rport && (old_state == NLP_STE_MAPPED_NODE || 3904 old_state == NLP_STE_UNMAPPED_NODE)) { 3905 vport->phba->nport_event_cnt++; 3906 lpfc_unregister_remote_port(ndlp); 3907 } 3908 3909 if (new_state == NLP_STE_MAPPED_NODE || 3910 new_state == NLP_STE_UNMAPPED_NODE) { 3911 vport->phba->nport_event_cnt++; 3912 /* 3913 * Tell the fc transport about the port, if we haven't 3914 * already. If we have, and it's a scsi entity, be 3915 * sure to unblock any attached scsi devices 3916 */ 3917 lpfc_register_remote_port(vport, ndlp); 3918 } 3919 if ((new_state == NLP_STE_MAPPED_NODE) && 3920 (vport->stat_data_enabled)) { 3921 /* 3922 * A new target is discovered, if there is no buffer for 3923 * statistical data collection allocate buffer. 3924 */ 3925 ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT, 3926 sizeof(struct lpfc_scsicmd_bkt), 3927 GFP_KERNEL); 3928 3929 if (!ndlp->lat_data) 3930 lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, 3931 "0286 lpfc_nlp_state_cleanup failed to " 3932 "allocate statistical data buffer DID " 3933 "0x%x\n", ndlp->nlp_DID); 3934 } 3935 /* 3936 * if we added to Mapped list, but the remote port 3937 * registration failed or assigned a target id outside 3938 * our presentable range - move the node to the 3939 * Unmapped List 3940 */ 3941 if (new_state == NLP_STE_MAPPED_NODE && 3942 (!ndlp->rport || 3943 ndlp->rport->scsi_target_id == -1 || 3944 ndlp->rport->scsi_target_id >= LPFC_MAX_TARGET)) { 3945 spin_lock_irq(shost->host_lock); 3946 ndlp->nlp_flag |= NLP_TGT_NO_SCSIID; 3947 spin_unlock_irq(shost->host_lock); 3948 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); 3949 } 3950 } 3951 3952 static char * 3953 lpfc_nlp_state_name(char *buffer, size_t size, int state) 3954 { 3955 static char *states[] = { 3956 [NLP_STE_UNUSED_NODE] = "UNUSED", 3957 [NLP_STE_PLOGI_ISSUE] = "PLOGI", 3958 [NLP_STE_ADISC_ISSUE] = "ADISC", 3959 [NLP_STE_REG_LOGIN_ISSUE] = "REGLOGIN", 3960 [NLP_STE_PRLI_ISSUE] = "PRLI", 3961 [NLP_STE_UNMAPPED_NODE] = "UNMAPPED", 3962 [NLP_STE_MAPPED_NODE] = "MAPPED", 3963 [NLP_STE_NPR_NODE] = "NPR", 3964 }; 3965 3966 if (state < NLP_STE_MAX_STATE && states[state]) 3967 strlcpy(buffer, states[state], size); 3968 else 3969 snprintf(buffer, size, "unknown (%d)", state); 3970 return buffer; 3971 } 3972 3973 void 3974 lpfc_nlp_set_state(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, 3975 int state) 3976 { 3977 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 3978 int old_state = ndlp->nlp_state; 3979 char name1[16], name2[16]; 3980 3981 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, 3982 "0904 NPort state transition x%06x, %s -> %s\n", 3983 ndlp->nlp_DID, 3984 lpfc_nlp_state_name(name1, sizeof(name1), old_state), 3985 lpfc_nlp_state_name(name2, sizeof(name2), state)); 3986 3987 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, 3988 "node statechg did:x%x old:%d ste:%d", 3989 ndlp->nlp_DID, old_state, state); 3990 3991 if (old_state == NLP_STE_NPR_NODE && 3992 state != NLP_STE_NPR_NODE) 3993 lpfc_cancel_retry_delay_tmo(vport, ndlp); 3994 if (old_state == NLP_STE_UNMAPPED_NODE) { 3995 ndlp->nlp_flag &= ~NLP_TGT_NO_SCSIID; 3996 ndlp->nlp_type &= ~NLP_FC_NODE; 3997 } 3998 3999 if (list_empty(&ndlp->nlp_listp)) { 4000 spin_lock_irq(shost->host_lock); 4001 list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes); 4002 spin_unlock_irq(shost->host_lock); 4003 } else if (old_state) 4004 lpfc_nlp_counters(vport, old_state, -1); 4005 4006 ndlp->nlp_state = state; 4007 lpfc_nlp_counters(vport, state, 1); 4008 lpfc_nlp_state_cleanup(vport, ndlp, old_state, state); 4009 } 4010 4011 void 4012 lpfc_enqueue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) 4013 { 4014 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 4015 4016 if (list_empty(&ndlp->nlp_listp)) { 4017 spin_lock_irq(shost->host_lock); 4018 list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes); 4019 spin_unlock_irq(shost->host_lock); 4020 } 4021 } 4022 4023 void 4024 lpfc_dequeue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) 4025 { 4026 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 4027 4028 lpfc_cancel_retry_delay_tmo(vport, ndlp); 4029 if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp)) 4030 lpfc_nlp_counters(vport, ndlp->nlp_state, -1); 4031 spin_lock_irq(shost->host_lock); 4032 list_del_init(&ndlp->nlp_listp); 4033 spin_unlock_irq(shost->host_lock); 4034 lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state, 4035 NLP_STE_UNUSED_NODE); 4036 } 4037 4038 static void 4039 lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) 4040 { 4041 lpfc_cancel_retry_delay_tmo(vport, ndlp); 4042 if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp)) 4043 lpfc_nlp_counters(vport, ndlp->nlp_state, -1); 4044 lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state, 4045 NLP_STE_UNUSED_NODE); 4046 } 4047 /** 4048 * lpfc_initialize_node - Initialize all fields of node object 4049 * @vport: Pointer to Virtual Port object. 4050 * @ndlp: Pointer to FC node object. 4051 * @did: FC_ID of the node. 4052 * 4053 * This function is always called when node object need to be initialized. 4054 * It initializes all the fields of the node object. Although the reference 4055 * to phba from @ndlp can be obtained indirectly through it's reference to 4056 * @vport, a direct reference to phba is taken here by @ndlp. This is due 4057 * to the life-span of the @ndlp might go beyond the existence of @vport as 4058 * the final release of ndlp is determined by its reference count. And, the 4059 * operation on @ndlp needs the reference to phba. 4060 **/ 4061 static inline void 4062 lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, 4063 uint32_t did) 4064 { 4065 INIT_LIST_HEAD(&ndlp->els_retry_evt.evt_listp); 4066 INIT_LIST_HEAD(&ndlp->dev_loss_evt.evt_listp); 4067 init_timer(&ndlp->nlp_delayfunc); 4068 ndlp->nlp_delayfunc.function = lpfc_els_retry_delay; 4069 ndlp->nlp_delayfunc.data = (unsigned long)ndlp; 4070 ndlp->nlp_DID = did; 4071 ndlp->vport = vport; 4072 ndlp->phba = vport->phba; 4073 ndlp->nlp_sid = NLP_NO_SID; 4074 kref_init(&ndlp->kref); 4075 NLP_INT_NODE_ACT(ndlp); 4076 atomic_set(&ndlp->cmd_pending, 0); 4077 ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth; 4078 if (vport->phba->sli_rev == LPFC_SLI_REV4) 4079 ndlp->nlp_rpi = lpfc_sli4_alloc_rpi(vport->phba); 4080 } 4081 4082 struct lpfc_nodelist * 4083 lpfc_enable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, 4084 int state) 4085 { 4086 struct lpfc_hba *phba = vport->phba; 4087 uint32_t did; 4088 unsigned long flags; 4089 4090 if (!ndlp) 4091 return NULL; 4092 4093 spin_lock_irqsave(&phba->ndlp_lock, flags); 4094 /* The ndlp should not be in memory free mode */ 4095 if (NLP_CHK_FREE_REQ(ndlp)) { 4096 spin_unlock_irqrestore(&phba->ndlp_lock, flags); 4097 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE, 4098 "0277 lpfc_enable_node: ndlp:x%p " 4099 "usgmap:x%x refcnt:%d\n", 4100 (void *)ndlp, ndlp->nlp_usg_map, 4101 atomic_read(&ndlp->kref.refcount)); 4102 return NULL; 4103 } 4104 /* The ndlp should not already be in active mode */ 4105 if (NLP_CHK_NODE_ACT(ndlp)) { 4106 spin_unlock_irqrestore(&phba->ndlp_lock, flags); 4107 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE, 4108 "0278 lpfc_enable_node: ndlp:x%p " 4109 "usgmap:x%x refcnt:%d\n", 4110 (void *)ndlp, ndlp->nlp_usg_map, 4111 atomic_read(&ndlp->kref.refcount)); 4112 return NULL; 4113 } 4114 4115 /* Keep the original DID */ 4116 did = ndlp->nlp_DID; 4117 4118 /* re-initialize ndlp except of ndlp linked list pointer */ 4119 memset((((char *)ndlp) + sizeof (struct list_head)), 0, 4120 sizeof (struct lpfc_nodelist) - sizeof (struct list_head)); 4121 lpfc_initialize_node(vport, ndlp, did); 4122 4123 spin_unlock_irqrestore(&phba->ndlp_lock, flags); 4124 4125 if (state != NLP_STE_UNUSED_NODE) 4126 lpfc_nlp_set_state(vport, ndlp, state); 4127 4128 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, 4129 "node enable: did:x%x", 4130 ndlp->nlp_DID, 0, 0); 4131 return ndlp; 4132 } 4133 4134 void 4135 lpfc_drop_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) 4136 { 4137 /* 4138 * Use of lpfc_drop_node and UNUSED list: lpfc_drop_node should 4139 * be used if we wish to issue the "last" lpfc_nlp_put() to remove 4140 * the ndlp from the vport. The ndlp marked as UNUSED on the list 4141 * until ALL other outstanding threads have completed. We check 4142 * that the ndlp not already in the UNUSED state before we proceed. 4143 */ 4144 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) 4145 return; 4146 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); 4147 if (vport->phba->sli_rev == LPFC_SLI_REV4) 4148 lpfc_cleanup_vports_rrqs(vport, ndlp); 4149 lpfc_nlp_put(ndlp); 4150 return; 4151 } 4152 4153 /* 4154 * Start / ReStart rescue timer for Discovery / RSCN handling 4155 */ 4156 void 4157 lpfc_set_disctmo(struct lpfc_vport *vport) 4158 { 4159 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 4160 struct lpfc_hba *phba = vport->phba; 4161 uint32_t tmo; 4162 4163 if (vport->port_state == LPFC_LOCAL_CFG_LINK) { 4164 /* For FAN, timeout should be greater than edtov */ 4165 tmo = (((phba->fc_edtov + 999) / 1000) + 1); 4166 } else { 4167 /* Normal discovery timeout should be > than ELS/CT timeout 4168 * FC spec states we need 3 * ratov for CT requests 4169 */ 4170 tmo = ((phba->fc_ratov * 3) + 3); 4171 } 4172 4173 4174 if (!timer_pending(&vport->fc_disctmo)) { 4175 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, 4176 "set disc timer: tmo:x%x state:x%x flg:x%x", 4177 tmo, vport->port_state, vport->fc_flag); 4178 } 4179 4180 mod_timer(&vport->fc_disctmo, jiffies + HZ * tmo); 4181 spin_lock_irq(shost->host_lock); 4182 vport->fc_flag |= FC_DISC_TMO; 4183 spin_unlock_irq(shost->host_lock); 4184 4185 /* Start Discovery Timer state <hba_state> */ 4186 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, 4187 "0247 Start Discovery Timer state x%x " 4188 "Data: x%x x%lx x%x x%x\n", 4189 vport->port_state, tmo, 4190 (unsigned long)&vport->fc_disctmo, vport->fc_plogi_cnt, 4191 vport->fc_adisc_cnt); 4192 4193 return; 4194 } 4195 4196 /* 4197 * Cancel rescue timer for Discovery / RSCN handling 4198 */ 4199 int 4200 lpfc_can_disctmo(struct lpfc_vport *vport) 4201 { 4202 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 4203 unsigned long iflags; 4204 4205 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, 4206 "can disc timer: state:x%x rtry:x%x flg:x%x", 4207 vport->port_state, vport->fc_ns_retry, vport->fc_flag); 4208 4209 /* Turn off discovery timer if its running */ 4210 if (vport->fc_flag & FC_DISC_TMO) { 4211 spin_lock_irqsave(shost->host_lock, iflags); 4212 vport->fc_flag &= ~FC_DISC_TMO; 4213 spin_unlock_irqrestore(shost->host_lock, iflags); 4214 del_timer_sync(&vport->fc_disctmo); 4215 spin_lock_irqsave(&vport->work_port_lock, iflags); 4216 vport->work_port_events &= ~WORKER_DISC_TMO; 4217 spin_unlock_irqrestore(&vport->work_port_lock, iflags); 4218 } 4219 4220 /* Cancel Discovery Timer state <hba_state> */ 4221 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, 4222 "0248 Cancel Discovery Timer state x%x " 4223 "Data: x%x x%x x%x\n", 4224 vport->port_state, vport->fc_flag, 4225 vport->fc_plogi_cnt, vport->fc_adisc_cnt); 4226 return 0; 4227 } 4228 4229 /* 4230 * Check specified ring for outstanding IOCB on the SLI queue 4231 * Return true if iocb matches the specified nport 4232 */ 4233 int 4234 lpfc_check_sli_ndlp(struct lpfc_hba *phba, 4235 struct lpfc_sli_ring *pring, 4236 struct lpfc_iocbq *iocb, 4237 struct lpfc_nodelist *ndlp) 4238 { 4239 struct lpfc_sli *psli = &phba->sli; 4240 IOCB_t *icmd = &iocb->iocb; 4241 struct lpfc_vport *vport = ndlp->vport; 4242 4243 if (iocb->vport != vport) 4244 return 0; 4245 4246 if (pring->ringno == LPFC_ELS_RING) { 4247 switch (icmd->ulpCommand) { 4248 case CMD_GEN_REQUEST64_CR: 4249 if (iocb->context_un.ndlp == ndlp) 4250 return 1; 4251 case CMD_ELS_REQUEST64_CR: 4252 if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID) 4253 return 1; 4254 case CMD_XMIT_ELS_RSP64_CX: 4255 if (iocb->context1 == (uint8_t *) ndlp) 4256 return 1; 4257 } 4258 } else if (pring->ringno == psli->extra_ring) { 4259 4260 } else if (pring->ringno == psli->fcp_ring) { 4261 /* Skip match check if waiting to relogin to FCP target */ 4262 if ((ndlp->nlp_type & NLP_FCP_TARGET) && 4263 (ndlp->nlp_flag & NLP_DELAY_TMO)) { 4264 return 0; 4265 } 4266 if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi) { 4267 return 1; 4268 } 4269 } else if (pring->ringno == psli->next_ring) { 4270 4271 } 4272 return 0; 4273 } 4274 4275 /* 4276 * Free resources / clean up outstanding I/Os 4277 * associated with nlp_rpi in the LPFC_NODELIST entry. 4278 */ 4279 static int 4280 lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) 4281 { 4282 LIST_HEAD(completions); 4283 struct lpfc_sli *psli; 4284 struct lpfc_sli_ring *pring; 4285 struct lpfc_iocbq *iocb, *next_iocb; 4286 uint32_t i; 4287 4288 lpfc_fabric_abort_nport(ndlp); 4289 4290 /* 4291 * Everything that matches on txcmplq will be returned 4292 * by firmware with a no rpi error. 4293 */ 4294 psli = &phba->sli; 4295 if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { 4296 /* Now process each ring */ 4297 for (i = 0; i < psli->num_rings; i++) { 4298 pring = &psli->ring[i]; 4299 4300 spin_lock_irq(&phba->hbalock); 4301 list_for_each_entry_safe(iocb, next_iocb, &pring->txq, 4302 list) { 4303 /* 4304 * Check to see if iocb matches the nport we are 4305 * looking for 4306 */ 4307 if ((lpfc_check_sli_ndlp(phba, pring, iocb, 4308 ndlp))) { 4309 /* It matches, so deque and call compl 4310 with an error */ 4311 list_move_tail(&iocb->list, 4312 &completions); 4313 pring->txq_cnt--; 4314 } 4315 } 4316 spin_unlock_irq(&phba->hbalock); 4317 } 4318 } 4319 4320 /* Cancel all the IOCBs from the completions list */ 4321 lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, 4322 IOERR_SLI_ABORTED); 4323 4324 return 0; 4325 } 4326 4327 /* 4328 * Free rpi associated with LPFC_NODELIST entry. 4329 * This routine is called from lpfc_freenode(), when we are removing 4330 * a LPFC_NODELIST entry. It is also called if the driver initiates a 4331 * LOGO that completes successfully, and we are waiting to PLOGI back 4332 * to the remote NPort. In addition, it is called after we receive 4333 * and unsolicated ELS cmd, send back a rsp, the rsp completes and 4334 * we are waiting to PLOGI back to the remote NPort. 4335 */ 4336 int 4337 lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) 4338 { 4339 struct lpfc_hba *phba = vport->phba; 4340 LPFC_MBOXQ_t *mbox; 4341 int rc; 4342 uint16_t rpi; 4343 4344 if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { 4345 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 4346 if (mbox) { 4347 /* SLI4 ports require the physical rpi value. */ 4348 rpi = ndlp->nlp_rpi; 4349 if (phba->sli_rev == LPFC_SLI_REV4) 4350 rpi = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; 4351 lpfc_unreg_login(phba, vport->vpi, rpi, mbox); 4352 mbox->vport = vport; 4353 mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; 4354 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); 4355 if (rc == MBX_NOT_FINISHED) 4356 mempool_free(mbox, phba->mbox_mem_pool); 4357 } 4358 lpfc_no_rpi(phba, ndlp); 4359 4360 if (phba->sli_rev != LPFC_SLI_REV4) 4361 ndlp->nlp_rpi = 0; 4362 ndlp->nlp_flag &= ~NLP_RPI_REGISTERED; 4363 ndlp->nlp_flag &= ~NLP_NPR_ADISC; 4364 return 1; 4365 } 4366 return 0; 4367 } 4368 4369 /** 4370 * lpfc_unreg_hba_rpis - Unregister rpis registered to the hba. 4371 * @phba: pointer to lpfc hba data structure. 4372 * 4373 * This routine is invoked to unregister all the currently registered RPIs 4374 * to the HBA. 4375 **/ 4376 void 4377 lpfc_unreg_hba_rpis(struct lpfc_hba *phba) 4378 { 4379 struct lpfc_vport **vports; 4380 struct lpfc_nodelist *ndlp; 4381 struct Scsi_Host *shost; 4382 int i; 4383 4384 vports = lpfc_create_vport_work_array(phba); 4385 if (!vports) { 4386 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, 4387 "2884 Vport array allocation failed \n"); 4388 return; 4389 } 4390 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { 4391 shost = lpfc_shost_from_vport(vports[i]); 4392 spin_lock_irq(shost->host_lock); 4393 list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) { 4394 if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { 4395 /* The mempool_alloc might sleep */ 4396 spin_unlock_irq(shost->host_lock); 4397 lpfc_unreg_rpi(vports[i], ndlp); 4398 spin_lock_irq(shost->host_lock); 4399 } 4400 } 4401 spin_unlock_irq(shost->host_lock); 4402 } 4403 lpfc_destroy_vport_work_array(phba, vports); 4404 } 4405 4406 void 4407 lpfc_unreg_all_rpis(struct lpfc_vport *vport) 4408 { 4409 struct lpfc_hba *phba = vport->phba; 4410 LPFC_MBOXQ_t *mbox; 4411 int rc; 4412 4413 if (phba->sli_rev == LPFC_SLI_REV4) { 4414 lpfc_sli4_unreg_all_rpis(vport); 4415 return; 4416 } 4417 4418 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 4419 if (mbox) { 4420 lpfc_unreg_login(phba, vport->vpi, LPFC_UNREG_ALL_RPIS_VPORT, 4421 mbox); 4422 mbox->vport = vport; 4423 mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; 4424 mbox->context1 = NULL; 4425 rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); 4426 if (rc != MBX_TIMEOUT) 4427 mempool_free(mbox, phba->mbox_mem_pool); 4428 4429 if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) 4430 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, 4431 "1836 Could not issue " 4432 "unreg_login(all_rpis) status %d\n", rc); 4433 } 4434 } 4435 4436 void 4437 lpfc_unreg_default_rpis(struct lpfc_vport *vport) 4438 { 4439 struct lpfc_hba *phba = vport->phba; 4440 LPFC_MBOXQ_t *mbox; 4441 int rc; 4442 4443 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 4444 if (mbox) { 4445 lpfc_unreg_did(phba, vport->vpi, LPFC_UNREG_ALL_DFLT_RPIS, 4446 mbox); 4447 mbox->vport = vport; 4448 mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; 4449 mbox->context1 = NULL; 4450 rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); 4451 if (rc != MBX_TIMEOUT) 4452 mempool_free(mbox, phba->mbox_mem_pool); 4453 4454 if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) 4455 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, 4456 "1815 Could not issue " 4457 "unreg_did (default rpis) status %d\n", 4458 rc); 4459 } 4460 } 4461 4462 /* 4463 * Free resources associated with LPFC_NODELIST entry 4464 * so it can be freed. 4465 */ 4466 static int 4467 lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) 4468 { 4469 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 4470 struct lpfc_hba *phba = vport->phba; 4471 LPFC_MBOXQ_t *mb, *nextmb; 4472 struct lpfc_dmabuf *mp; 4473 4474 /* Cleanup node for NPort <nlp_DID> */ 4475 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, 4476 "0900 Cleanup node for NPort x%x " 4477 "Data: x%x x%x x%x\n", 4478 ndlp->nlp_DID, ndlp->nlp_flag, 4479 ndlp->nlp_state, ndlp->nlp_rpi); 4480 if (NLP_CHK_FREE_REQ(ndlp)) { 4481 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE, 4482 "0280 lpfc_cleanup_node: ndlp:x%p " 4483 "usgmap:x%x refcnt:%d\n", 4484 (void *)ndlp, ndlp->nlp_usg_map, 4485 atomic_read(&ndlp->kref.refcount)); 4486 lpfc_dequeue_node(vport, ndlp); 4487 } else { 4488 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE, 4489 "0281 lpfc_cleanup_node: ndlp:x%p " 4490 "usgmap:x%x refcnt:%d\n", 4491 (void *)ndlp, ndlp->nlp_usg_map, 4492 atomic_read(&ndlp->kref.refcount)); 4493 lpfc_disable_node(vport, ndlp); 4494 } 4495 4496 /* cleanup any ndlp on mbox q waiting for reglogin cmpl */ 4497 if ((mb = phba->sli.mbox_active)) { 4498 if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && 4499 (ndlp == (struct lpfc_nodelist *) mb->context2)) { 4500 mb->context2 = NULL; 4501 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; 4502 } 4503 } 4504 4505 spin_lock_irq(&phba->hbalock); 4506 /* Cleanup REG_LOGIN completions which are not yet processed */ 4507 list_for_each_entry(mb, &phba->sli.mboxq_cmpl, list) { 4508 if ((mb->u.mb.mbxCommand != MBX_REG_LOGIN64) || 4509 (ndlp != (struct lpfc_nodelist *) mb->context2)) 4510 continue; 4511 4512 mb->context2 = NULL; 4513 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; 4514 } 4515 4516 list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) { 4517 if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && 4518 (ndlp == (struct lpfc_nodelist *) mb->context2)) { 4519 mp = (struct lpfc_dmabuf *) (mb->context1); 4520 if (mp) { 4521 __lpfc_mbuf_free(phba, mp->virt, mp->phys); 4522 kfree(mp); 4523 } 4524 list_del(&mb->list); 4525 mempool_free(mb, phba->mbox_mem_pool); 4526 /* We shall not invoke the lpfc_nlp_put to decrement 4527 * the ndlp reference count as we are in the process 4528 * of lpfc_nlp_release. 4529 */ 4530 } 4531 } 4532 spin_unlock_irq(&phba->hbalock); 4533 4534 lpfc_els_abort(phba, ndlp); 4535 4536 spin_lock_irq(shost->host_lock); 4537 ndlp->nlp_flag &= ~NLP_DELAY_TMO; 4538 spin_unlock_irq(shost->host_lock); 4539 4540 ndlp->nlp_last_elscmd = 0; 4541 del_timer_sync(&ndlp->nlp_delayfunc); 4542 4543 list_del_init(&ndlp->els_retry_evt.evt_listp); 4544 list_del_init(&ndlp->dev_loss_evt.evt_listp); 4545 lpfc_cleanup_vports_rrqs(vport, ndlp); 4546 lpfc_unreg_rpi(vport, ndlp); 4547 4548 return 0; 4549 } 4550 4551 /* 4552 * Check to see if we can free the nlp back to the freelist. 4553 * If we are in the middle of using the nlp in the discovery state 4554 * machine, defer the free till we reach the end of the state machine. 4555 */ 4556 static void 4557 lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) 4558 { 4559 struct lpfc_hba *phba = vport->phba; 4560 struct lpfc_rport_data *rdata; 4561 LPFC_MBOXQ_t *mbox; 4562 int rc; 4563 4564 lpfc_cancel_retry_delay_tmo(vport, ndlp); 4565 if ((ndlp->nlp_flag & NLP_DEFER_RM) && 4566 !(ndlp->nlp_flag & NLP_REG_LOGIN_SEND) && 4567 !(ndlp->nlp_flag & NLP_RPI_REGISTERED)) { 4568 /* For this case we need to cleanup the default rpi 4569 * allocated by the firmware. 4570 */ 4571 if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL)) 4572 != NULL) { 4573 rc = lpfc_reg_rpi(phba, vport->vpi, ndlp->nlp_DID, 4574 (uint8_t *) &vport->fc_sparam, mbox, ndlp->nlp_rpi); 4575 if (rc) { 4576 mempool_free(mbox, phba->mbox_mem_pool); 4577 } 4578 else { 4579 mbox->mbox_flag |= LPFC_MBX_IMED_UNREG; 4580 mbox->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi; 4581 mbox->vport = vport; 4582 mbox->context2 = NULL; 4583 rc =lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); 4584 if (rc == MBX_NOT_FINISHED) { 4585 mempool_free(mbox, phba->mbox_mem_pool); 4586 } 4587 } 4588 } 4589 } 4590 lpfc_cleanup_node(vport, ndlp); 4591 4592 /* 4593 * We can get here with a non-NULL ndlp->rport because when we 4594 * unregister a rport we don't break the rport/node linkage. So if we 4595 * do, make sure we don't leaving any dangling pointers behind. 4596 */ 4597 if (ndlp->rport) { 4598 rdata = ndlp->rport->dd_data; 4599 rdata->pnode = NULL; 4600 ndlp->rport = NULL; 4601 } 4602 } 4603 4604 static int 4605 lpfc_matchdid(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, 4606 uint32_t did) 4607 { 4608 D_ID mydid, ndlpdid, matchdid; 4609 4610 if (did == Bcast_DID) 4611 return 0; 4612 4613 /* First check for Direct match */ 4614 if (ndlp->nlp_DID == did) 4615 return 1; 4616 4617 /* Next check for area/domain identically equals 0 match */ 4618 mydid.un.word = vport->fc_myDID; 4619 if ((mydid.un.b.domain == 0) && (mydid.un.b.area == 0)) { 4620 return 0; 4621 } 4622 4623 matchdid.un.word = did; 4624 ndlpdid.un.word = ndlp->nlp_DID; 4625 if (matchdid.un.b.id == ndlpdid.un.b.id) { 4626 if ((mydid.un.b.domain == matchdid.un.b.domain) && 4627 (mydid.un.b.area == matchdid.un.b.area)) { 4628 if ((ndlpdid.un.b.domain == 0) && 4629 (ndlpdid.un.b.area == 0)) { 4630 if (ndlpdid.un.b.id) 4631 return 1; 4632 } 4633 return 0; 4634 } 4635 4636 matchdid.un.word = ndlp->nlp_DID; 4637 if ((mydid.un.b.domain == ndlpdid.un.b.domain) && 4638 (mydid.un.b.area == ndlpdid.un.b.area)) { 4639 if ((matchdid.un.b.domain == 0) && 4640 (matchdid.un.b.area == 0)) { 4641 if (matchdid.un.b.id) 4642 return 1; 4643 } 4644 } 4645 } 4646 return 0; 4647 } 4648 4649 /* Search for a nodelist entry */ 4650 static struct lpfc_nodelist * 4651 __lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did) 4652 { 4653 struct lpfc_nodelist *ndlp; 4654 uint32_t data1; 4655 4656 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { 4657 if (lpfc_matchdid(vport, ndlp, did)) { 4658 data1 = (((uint32_t) ndlp->nlp_state << 24) | 4659 ((uint32_t) ndlp->nlp_xri << 16) | 4660 ((uint32_t) ndlp->nlp_type << 8) | 4661 ((uint32_t) ndlp->nlp_rpi & 0xff)); 4662 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, 4663 "0929 FIND node DID " 4664 "Data: x%p x%x x%x x%x\n", 4665 ndlp, ndlp->nlp_DID, 4666 ndlp->nlp_flag, data1); 4667 return ndlp; 4668 } 4669 } 4670 4671 /* FIND node did <did> NOT FOUND */ 4672 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, 4673 "0932 FIND node did x%x NOT FOUND.\n", did); 4674 return NULL; 4675 } 4676 4677 struct lpfc_nodelist * 4678 lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did) 4679 { 4680 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 4681 struct lpfc_nodelist *ndlp; 4682 unsigned long iflags; 4683 4684 spin_lock_irqsave(shost->host_lock, iflags); 4685 ndlp = __lpfc_findnode_did(vport, did); 4686 spin_unlock_irqrestore(shost->host_lock, iflags); 4687 return ndlp; 4688 } 4689 4690 struct lpfc_nodelist * 4691 lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did) 4692 { 4693 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 4694 struct lpfc_nodelist *ndlp; 4695 4696 ndlp = lpfc_findnode_did(vport, did); 4697 if (!ndlp) { 4698 if ((vport->fc_flag & FC_RSCN_MODE) != 0 && 4699 lpfc_rscn_payload_check(vport, did) == 0) 4700 return NULL; 4701 ndlp = (struct lpfc_nodelist *) 4702 mempool_alloc(vport->phba->nlp_mem_pool, GFP_KERNEL); 4703 if (!ndlp) 4704 return NULL; 4705 lpfc_nlp_init(vport, ndlp, did); 4706 lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); 4707 spin_lock_irq(shost->host_lock); 4708 ndlp->nlp_flag |= NLP_NPR_2B_DISC; 4709 spin_unlock_irq(shost->host_lock); 4710 return ndlp; 4711 } else if (!NLP_CHK_NODE_ACT(ndlp)) { 4712 ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_NPR_NODE); 4713 if (!ndlp) 4714 return NULL; 4715 spin_lock_irq(shost->host_lock); 4716 ndlp->nlp_flag |= NLP_NPR_2B_DISC; 4717 spin_unlock_irq(shost->host_lock); 4718 return ndlp; 4719 } 4720 4721 if ((vport->fc_flag & FC_RSCN_MODE) && 4722 !(vport->fc_flag & FC_NDISC_ACTIVE)) { 4723 if (lpfc_rscn_payload_check(vport, did)) { 4724 /* If we've already received a PLOGI from this NPort 4725 * we don't need to try to discover it again. 4726 */ 4727 if (ndlp->nlp_flag & NLP_RCV_PLOGI) 4728 return NULL; 4729 4730 /* Since this node is marked for discovery, 4731 * delay timeout is not needed. 4732 */ 4733 lpfc_cancel_retry_delay_tmo(vport, ndlp); 4734 spin_lock_irq(shost->host_lock); 4735 ndlp->nlp_flag |= NLP_NPR_2B_DISC; 4736 spin_unlock_irq(shost->host_lock); 4737 } else 4738 ndlp = NULL; 4739 } else { 4740 /* If we've already received a PLOGI from this NPort, 4741 * or we are already in the process of discovery on it, 4742 * we don't need to try to discover it again. 4743 */ 4744 if (ndlp->nlp_state == NLP_STE_ADISC_ISSUE || 4745 ndlp->nlp_state == NLP_STE_PLOGI_ISSUE || 4746 ndlp->nlp_flag & NLP_RCV_PLOGI) 4747 return NULL; 4748 lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); 4749 spin_lock_irq(shost->host_lock); 4750 ndlp->nlp_flag |= NLP_NPR_2B_DISC; 4751 spin_unlock_irq(shost->host_lock); 4752 } 4753 return ndlp; 4754 } 4755 4756 /* Build a list of nodes to discover based on the loopmap */ 4757 void 4758 lpfc_disc_list_loopmap(struct lpfc_vport *vport) 4759 { 4760 struct lpfc_hba *phba = vport->phba; 4761 int j; 4762 uint32_t alpa, index; 4763 4764 if (!lpfc_is_link_up(phba)) 4765 return; 4766 4767 if (phba->fc_topology != LPFC_TOPOLOGY_LOOP) 4768 return; 4769 4770 /* Check for loop map present or not */ 4771 if (phba->alpa_map[0]) { 4772 for (j = 1; j <= phba->alpa_map[0]; j++) { 4773 alpa = phba->alpa_map[j]; 4774 if (((vport->fc_myDID & 0xff) == alpa) || (alpa == 0)) 4775 continue; 4776 lpfc_setup_disc_node(vport, alpa); 4777 } 4778 } else { 4779 /* No alpamap, so try all alpa's */ 4780 for (j = 0; j < FC_MAXLOOP; j++) { 4781 /* If cfg_scan_down is set, start from highest 4782 * ALPA (0xef) to lowest (0x1). 4783 */ 4784 if (vport->cfg_scan_down) 4785 index = j; 4786 else 4787 index = FC_MAXLOOP - j - 1; 4788 alpa = lpfcAlpaArray[index]; 4789 if ((vport->fc_myDID & 0xff) == alpa) 4790 continue; 4791 lpfc_setup_disc_node(vport, alpa); 4792 } 4793 } 4794 return; 4795 } 4796 4797 void 4798 lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport) 4799 { 4800 LPFC_MBOXQ_t *mbox; 4801 struct lpfc_sli *psli = &phba->sli; 4802 struct lpfc_sli_ring *extra_ring = &psli->ring[psli->extra_ring]; 4803 struct lpfc_sli_ring *fcp_ring = &psli->ring[psli->fcp_ring]; 4804 struct lpfc_sli_ring *next_ring = &psli->ring[psli->next_ring]; 4805 int rc; 4806 4807 /* 4808 * if it's not a physical port or if we already send 4809 * clear_la then don't send it. 4810 */ 4811 if ((phba->link_state >= LPFC_CLEAR_LA) || 4812 (vport->port_type != LPFC_PHYSICAL_PORT) || 4813 (phba->sli_rev == LPFC_SLI_REV4)) 4814 return; 4815 4816 /* Link up discovery */ 4817 if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL)) != NULL) { 4818 phba->link_state = LPFC_CLEAR_LA; 4819 lpfc_clear_la(phba, mbox); 4820 mbox->mbox_cmpl = lpfc_mbx_cmpl_clear_la; 4821 mbox->vport = vport; 4822 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); 4823 if (rc == MBX_NOT_FINISHED) { 4824 mempool_free(mbox, phba->mbox_mem_pool); 4825 lpfc_disc_flush_list(vport); 4826 extra_ring->flag &= ~LPFC_STOP_IOCB_EVENT; 4827 fcp_ring->flag &= ~LPFC_STOP_IOCB_EVENT; 4828 next_ring->flag &= ~LPFC_STOP_IOCB_EVENT; 4829 phba->link_state = LPFC_HBA_ERROR; 4830 } 4831 } 4832 } 4833 4834 /* Reg_vpi to tell firmware to resume normal operations */ 4835 void 4836 lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport) 4837 { 4838 LPFC_MBOXQ_t *regvpimbox; 4839 4840 regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 4841 if (regvpimbox) { 4842 lpfc_reg_vpi(vport, regvpimbox); 4843 regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi; 4844 regvpimbox->vport = vport; 4845 if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT) 4846 == MBX_NOT_FINISHED) { 4847 mempool_free(regvpimbox, phba->mbox_mem_pool); 4848 } 4849 } 4850 } 4851 4852 /* Start Link up / RSCN discovery on NPR nodes */ 4853 void 4854 lpfc_disc_start(struct lpfc_vport *vport) 4855 { 4856 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 4857 struct lpfc_hba *phba = vport->phba; 4858 uint32_t num_sent; 4859 uint32_t clear_la_pending; 4860 int did_changed; 4861 4862 if (!lpfc_is_link_up(phba)) 4863 return; 4864 4865 if (phba->link_state == LPFC_CLEAR_LA) 4866 clear_la_pending = 1; 4867 else 4868 clear_la_pending = 0; 4869 4870 if (vport->port_state < LPFC_VPORT_READY) 4871 vport->port_state = LPFC_DISC_AUTH; 4872 4873 lpfc_set_disctmo(vport); 4874 4875 if (vport->fc_prevDID == vport->fc_myDID) 4876 did_changed = 0; 4877 else 4878 did_changed = 1; 4879 4880 vport->fc_prevDID = vport->fc_myDID; 4881 vport->num_disc_nodes = 0; 4882 4883 /* Start Discovery state <hba_state> */ 4884 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, 4885 "0202 Start Discovery hba state x%x " 4886 "Data: x%x x%x x%x\n", 4887 vport->port_state, vport->fc_flag, vport->fc_plogi_cnt, 4888 vport->fc_adisc_cnt); 4889 4890 /* First do ADISCs - if any */ 4891 num_sent = lpfc_els_disc_adisc(vport); 4892 4893 if (num_sent) 4894 return; 4895 4896 /* Register the VPI for SLI3, NON-NPIV only. */ 4897 if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && 4898 !(vport->fc_flag & FC_PT2PT) && 4899 !(vport->fc_flag & FC_RSCN_MODE) && 4900 (phba->sli_rev < LPFC_SLI_REV4)) { 4901 lpfc_issue_reg_vpi(phba, vport); 4902 return; 4903 } 4904 4905 /* 4906 * For SLI2, we need to set port_state to READY and continue 4907 * discovery. 4908 */ 4909 if (vport->port_state < LPFC_VPORT_READY && !clear_la_pending) { 4910 /* If we get here, there is nothing to ADISC */ 4911 if (vport->port_type == LPFC_PHYSICAL_PORT) 4912 lpfc_issue_clear_la(phba, vport); 4913 4914 if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) { 4915 vport->num_disc_nodes = 0; 4916 /* go thru NPR nodes and issue ELS PLOGIs */ 4917 if (vport->fc_npr_cnt) 4918 lpfc_els_disc_plogi(vport); 4919 4920 if (!vport->num_disc_nodes) { 4921 spin_lock_irq(shost->host_lock); 4922 vport->fc_flag &= ~FC_NDISC_ACTIVE; 4923 spin_unlock_irq(shost->host_lock); 4924 lpfc_can_disctmo(vport); 4925 } 4926 } 4927 vport->port_state = LPFC_VPORT_READY; 4928 } else { 4929 /* Next do PLOGIs - if any */ 4930 num_sent = lpfc_els_disc_plogi(vport); 4931 4932 if (num_sent) 4933 return; 4934 4935 if (vport->fc_flag & FC_RSCN_MODE) { 4936 /* Check to see if more RSCNs came in while we 4937 * were processing this one. 4938 */ 4939 if ((vport->fc_rscn_id_cnt == 0) && 4940 (!(vport->fc_flag & FC_RSCN_DISCOVERY))) { 4941 spin_lock_irq(shost->host_lock); 4942 vport->fc_flag &= ~FC_RSCN_MODE; 4943 spin_unlock_irq(shost->host_lock); 4944 lpfc_can_disctmo(vport); 4945 } else 4946 lpfc_els_handle_rscn(vport); 4947 } 4948 } 4949 return; 4950 } 4951 4952 /* 4953 * Ignore completion for all IOCBs on tx and txcmpl queue for ELS 4954 * ring the match the sppecified nodelist. 4955 */ 4956 static void 4957 lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) 4958 { 4959 LIST_HEAD(completions); 4960 struct lpfc_sli *psli; 4961 IOCB_t *icmd; 4962 struct lpfc_iocbq *iocb, *next_iocb; 4963 struct lpfc_sli_ring *pring; 4964 4965 psli = &phba->sli; 4966 pring = &psli->ring[LPFC_ELS_RING]; 4967 4968 /* Error matching iocb on txq or txcmplq 4969 * First check the txq. 4970 */ 4971 spin_lock_irq(&phba->hbalock); 4972 list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) { 4973 if (iocb->context1 != ndlp) { 4974 continue; 4975 } 4976 icmd = &iocb->iocb; 4977 if ((icmd->ulpCommand == CMD_ELS_REQUEST64_CR) || 4978 (icmd->ulpCommand == CMD_XMIT_ELS_RSP64_CX)) { 4979 4980 list_move_tail(&iocb->list, &completions); 4981 pring->txq_cnt--; 4982 } 4983 } 4984 4985 /* Next check the txcmplq */ 4986 list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) { 4987 if (iocb->context1 != ndlp) { 4988 continue; 4989 } 4990 icmd = &iocb->iocb; 4991 if (icmd->ulpCommand == CMD_ELS_REQUEST64_CR || 4992 icmd->ulpCommand == CMD_XMIT_ELS_RSP64_CX) { 4993 lpfc_sli_issue_abort_iotag(phba, pring, iocb); 4994 } 4995 } 4996 spin_unlock_irq(&phba->hbalock); 4997 4998 /* Cancel all the IOCBs from the completions list */ 4999 lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, 5000 IOERR_SLI_ABORTED); 5001 } 5002 5003 static void 5004 lpfc_disc_flush_list(struct lpfc_vport *vport) 5005 { 5006 struct lpfc_nodelist *ndlp, *next_ndlp; 5007 struct lpfc_hba *phba = vport->phba; 5008 5009 if (vport->fc_plogi_cnt || vport->fc_adisc_cnt) { 5010 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, 5011 nlp_listp) { 5012 if (!NLP_CHK_NODE_ACT(ndlp)) 5013 continue; 5014 if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE || 5015 ndlp->nlp_state == NLP_STE_ADISC_ISSUE) { 5016 lpfc_free_tx(phba, ndlp); 5017 } 5018 } 5019 } 5020 } 5021 5022 void 5023 lpfc_cleanup_discovery_resources(struct lpfc_vport *vport) 5024 { 5025 lpfc_els_flush_rscn(vport); 5026 lpfc_els_flush_cmd(vport); 5027 lpfc_disc_flush_list(vport); 5028 } 5029 5030 /*****************************************************************************/ 5031 /* 5032 * NAME: lpfc_disc_timeout 5033 * 5034 * FUNCTION: Fibre Channel driver discovery timeout routine. 5035 * 5036 * EXECUTION ENVIRONMENT: interrupt only 5037 * 5038 * CALLED FROM: 5039 * Timer function 5040 * 5041 * RETURNS: 5042 * none 5043 */ 5044 /*****************************************************************************/ 5045 void 5046 lpfc_disc_timeout(unsigned long ptr) 5047 { 5048 struct lpfc_vport *vport = (struct lpfc_vport *) ptr; 5049 struct lpfc_hba *phba = vport->phba; 5050 uint32_t tmo_posted; 5051 unsigned long flags = 0; 5052 5053 if (unlikely(!phba)) 5054 return; 5055 5056 spin_lock_irqsave(&vport->work_port_lock, flags); 5057 tmo_posted = vport->work_port_events & WORKER_DISC_TMO; 5058 if (!tmo_posted) 5059 vport->work_port_events |= WORKER_DISC_TMO; 5060 spin_unlock_irqrestore(&vport->work_port_lock, flags); 5061 5062 if (!tmo_posted) 5063 lpfc_worker_wake_up(phba); 5064 return; 5065 } 5066 5067 static void 5068 lpfc_disc_timeout_handler(struct lpfc_vport *vport) 5069 { 5070 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 5071 struct lpfc_hba *phba = vport->phba; 5072 struct lpfc_sli *psli = &phba->sli; 5073 struct lpfc_nodelist *ndlp, *next_ndlp; 5074 LPFC_MBOXQ_t *initlinkmbox; 5075 int rc, clrlaerr = 0; 5076 5077 if (!(vport->fc_flag & FC_DISC_TMO)) 5078 return; 5079 5080 spin_lock_irq(shost->host_lock); 5081 vport->fc_flag &= ~FC_DISC_TMO; 5082 spin_unlock_irq(shost->host_lock); 5083 5084 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, 5085 "disc timeout: state:x%x rtry:x%x flg:x%x", 5086 vport->port_state, vport->fc_ns_retry, vport->fc_flag); 5087 5088 switch (vport->port_state) { 5089 5090 case LPFC_LOCAL_CFG_LINK: 5091 /* port_state is identically LPFC_LOCAL_CFG_LINK while waiting for 5092 * FAN 5093 */ 5094 /* FAN timeout */ 5095 lpfc_printf_vlog(vport, KERN_WARNING, LOG_DISCOVERY, 5096 "0221 FAN timeout\n"); 5097 /* Start discovery by sending FLOGI, clean up old rpis */ 5098 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, 5099 nlp_listp) { 5100 if (!NLP_CHK_NODE_ACT(ndlp)) 5101 continue; 5102 if (ndlp->nlp_state != NLP_STE_NPR_NODE) 5103 continue; 5104 if (ndlp->nlp_type & NLP_FABRIC) { 5105 /* Clean up the ndlp on Fabric connections */ 5106 lpfc_drop_node(vport, ndlp); 5107 5108 } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) { 5109 /* Fail outstanding IO now since device 5110 * is marked for PLOGI. 5111 */ 5112 lpfc_unreg_rpi(vport, ndlp); 5113 } 5114 } 5115 if (vport->port_state != LPFC_FLOGI) { 5116 if (phba->sli_rev <= LPFC_SLI_REV3) 5117 lpfc_initial_flogi(vport); 5118 else 5119 lpfc_issue_init_vfi(vport); 5120 return; 5121 } 5122 break; 5123 5124 case LPFC_FDISC: 5125 case LPFC_FLOGI: 5126 /* port_state is identically LPFC_FLOGI while waiting for FLOGI cmpl */ 5127 /* Initial FLOGI timeout */ 5128 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, 5129 "0222 Initial %s timeout\n", 5130 vport->vpi ? "FDISC" : "FLOGI"); 5131 5132 /* Assume no Fabric and go on with discovery. 5133 * Check for outstanding ELS FLOGI to abort. 5134 */ 5135 5136 /* FLOGI failed, so just use loop map to make discovery list */ 5137 lpfc_disc_list_loopmap(vport); 5138 5139 /* Start discovery */ 5140 lpfc_disc_start(vport); 5141 break; 5142 5143 case LPFC_FABRIC_CFG_LINK: 5144 /* hba_state is identically LPFC_FABRIC_CFG_LINK while waiting for 5145 NameServer login */ 5146 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, 5147 "0223 Timeout while waiting for " 5148 "NameServer login\n"); 5149 /* Next look for NameServer ndlp */ 5150 ndlp = lpfc_findnode_did(vport, NameServer_DID); 5151 if (ndlp && NLP_CHK_NODE_ACT(ndlp)) 5152 lpfc_els_abort(phba, ndlp); 5153 5154 /* ReStart discovery */ 5155 goto restart_disc; 5156 5157 case LPFC_NS_QRY: 5158 /* Check for wait for NameServer Rsp timeout */ 5159 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, 5160 "0224 NameServer Query timeout " 5161 "Data: x%x x%x\n", 5162 vport->fc_ns_retry, LPFC_MAX_NS_RETRY); 5163 5164 if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) { 5165 /* Try it one more time */ 5166 vport->fc_ns_retry++; 5167 rc = lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, 5168 vport->fc_ns_retry, 0); 5169 if (rc == 0) 5170 break; 5171 } 5172 vport->fc_ns_retry = 0; 5173 5174 restart_disc: 5175 /* 5176 * Discovery is over. 5177 * set port_state to PORT_READY if SLI2. 5178 * cmpl_reg_vpi will set port_state to READY for SLI3. 5179 */ 5180 if (phba->sli_rev < LPFC_SLI_REV4) { 5181 if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) 5182 lpfc_issue_reg_vpi(phba, vport); 5183 else { 5184 lpfc_issue_clear_la(phba, vport); 5185 vport->port_state = LPFC_VPORT_READY; 5186 } 5187 } 5188 5189 /* Setup and issue mailbox INITIALIZE LINK command */ 5190 initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 5191 if (!initlinkmbox) { 5192 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, 5193 "0206 Device Discovery " 5194 "completion error\n"); 5195 phba->link_state = LPFC_HBA_ERROR; 5196 break; 5197 } 5198 5199 lpfc_linkdown(phba); 5200 lpfc_init_link(phba, initlinkmbox, phba->cfg_topology, 5201 phba->cfg_link_speed); 5202 initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0; 5203 initlinkmbox->vport = vport; 5204 initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; 5205 rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT); 5206 lpfc_set_loopback_flag(phba); 5207 if (rc == MBX_NOT_FINISHED) 5208 mempool_free(initlinkmbox, phba->mbox_mem_pool); 5209 5210 break; 5211 5212 case LPFC_DISC_AUTH: 5213 /* Node Authentication timeout */ 5214 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, 5215 "0227 Node Authentication timeout\n"); 5216 lpfc_disc_flush_list(vport); 5217 5218 /* 5219 * set port_state to PORT_READY if SLI2. 5220 * cmpl_reg_vpi will set port_state to READY for SLI3. 5221 */ 5222 if (phba->sli_rev < LPFC_SLI_REV4) { 5223 if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) 5224 lpfc_issue_reg_vpi(phba, vport); 5225 else { /* NPIV Not enabled */ 5226 lpfc_issue_clear_la(phba, vport); 5227 vport->port_state = LPFC_VPORT_READY; 5228 } 5229 } 5230 break; 5231 5232 case LPFC_VPORT_READY: 5233 if (vport->fc_flag & FC_RSCN_MODE) { 5234 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, 5235 "0231 RSCN timeout Data: x%x " 5236 "x%x\n", 5237 vport->fc_ns_retry, LPFC_MAX_NS_RETRY); 5238 5239 /* Cleanup any outstanding ELS commands */ 5240 lpfc_els_flush_cmd(vport); 5241 5242 lpfc_els_flush_rscn(vport); 5243 lpfc_disc_flush_list(vport); 5244 } 5245 break; 5246 5247 default: 5248 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, 5249 "0273 Unexpected discovery timeout, " 5250 "vport State x%x\n", vport->port_state); 5251 break; 5252 } 5253 5254 switch (phba->link_state) { 5255 case LPFC_CLEAR_LA: 5256 /* CLEAR LA timeout */ 5257 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, 5258 "0228 CLEAR LA timeout\n"); 5259 clrlaerr = 1; 5260 break; 5261 5262 case LPFC_LINK_UP: 5263 lpfc_issue_clear_la(phba, vport); 5264 /* Drop thru */ 5265 case LPFC_LINK_UNKNOWN: 5266 case LPFC_WARM_START: 5267 case LPFC_INIT_START: 5268 case LPFC_INIT_MBX_CMDS: 5269 case LPFC_LINK_DOWN: 5270 case LPFC_HBA_ERROR: 5271 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, 5272 "0230 Unexpected timeout, hba link " 5273 "state x%x\n", phba->link_state); 5274 clrlaerr = 1; 5275 break; 5276 5277 case LPFC_HBA_READY: 5278 break; 5279 } 5280 5281 if (clrlaerr) { 5282 lpfc_disc_flush_list(vport); 5283 psli->ring[(psli->extra_ring)].flag &= ~LPFC_STOP_IOCB_EVENT; 5284 psli->ring[(psli->fcp_ring)].flag &= ~LPFC_STOP_IOCB_EVENT; 5285 psli->ring[(psli->next_ring)].flag &= ~LPFC_STOP_IOCB_EVENT; 5286 vport->port_state = LPFC_VPORT_READY; 5287 } 5288 5289 return; 5290 } 5291 5292 /* 5293 * This routine handles processing a NameServer REG_LOGIN mailbox 5294 * command upon completion. It is setup in the LPFC_MBOXQ 5295 * as the completion routine when the command is 5296 * handed off to the SLI layer. 5297 */ 5298 void 5299 lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) 5300 { 5301 MAILBOX_t *mb = &pmb->u.mb; 5302 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1); 5303 struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2; 5304 struct lpfc_vport *vport = pmb->vport; 5305 5306 pmb->context1 = NULL; 5307 pmb->context2 = NULL; 5308 5309 if (phba->sli_rev < LPFC_SLI_REV4) 5310 ndlp->nlp_rpi = mb->un.varWords[0]; 5311 ndlp->nlp_flag |= NLP_RPI_REGISTERED; 5312 ndlp->nlp_type |= NLP_FABRIC; 5313 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); 5314 5315 /* 5316 * Start issuing Fabric-Device Management Interface (FDMI) command to 5317 * 0xfffffa (FDMI well known port) or Delay issuing FDMI command if 5318 * fdmi-on=2 (supporting RPA/hostnmae) 5319 */ 5320 5321 if (vport->cfg_fdmi_on == 1) 5322 lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA); 5323 else 5324 mod_timer(&vport->fc_fdmitmo, jiffies + HZ * 60); 5325 5326 /* decrement the node reference count held for this callback 5327 * function. 5328 */ 5329 lpfc_nlp_put(ndlp); 5330 lpfc_mbuf_free(phba, mp->virt, mp->phys); 5331 kfree(mp); 5332 mempool_free(pmb, phba->mbox_mem_pool); 5333 5334 return; 5335 } 5336 5337 static int 5338 lpfc_filter_by_rpi(struct lpfc_nodelist *ndlp, void *param) 5339 { 5340 uint16_t *rpi = param; 5341 5342 /* check for active node */ 5343 if (!NLP_CHK_NODE_ACT(ndlp)) 5344 return 0; 5345 5346 return ndlp->nlp_rpi == *rpi; 5347 } 5348 5349 static int 5350 lpfc_filter_by_wwpn(struct lpfc_nodelist *ndlp, void *param) 5351 { 5352 return memcmp(&ndlp->nlp_portname, param, 5353 sizeof(ndlp->nlp_portname)) == 0; 5354 } 5355 5356 static struct lpfc_nodelist * 5357 __lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param) 5358 { 5359 struct lpfc_nodelist *ndlp; 5360 5361 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { 5362 if (filter(ndlp, param)) 5363 return ndlp; 5364 } 5365 return NULL; 5366 } 5367 5368 /* 5369 * This routine looks up the ndlp lists for the given RPI. If rpi found it 5370 * returns the node list element pointer else return NULL. 5371 */ 5372 struct lpfc_nodelist * 5373 __lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi) 5374 { 5375 return __lpfc_find_node(vport, lpfc_filter_by_rpi, &rpi); 5376 } 5377 5378 /* 5379 * This routine looks up the ndlp lists for the given WWPN. If WWPN found it 5380 * returns the node element list pointer else return NULL. 5381 */ 5382 struct lpfc_nodelist * 5383 lpfc_findnode_wwpn(struct lpfc_vport *vport, struct lpfc_name *wwpn) 5384 { 5385 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 5386 struct lpfc_nodelist *ndlp; 5387 5388 spin_lock_irq(shost->host_lock); 5389 ndlp = __lpfc_find_node(vport, lpfc_filter_by_wwpn, wwpn); 5390 spin_unlock_irq(shost->host_lock); 5391 return ndlp; 5392 } 5393 5394 /* 5395 * This routine looks up the ndlp lists for the given RPI. If the rpi 5396 * is found, the routine returns the node element list pointer else 5397 * return NULL. 5398 */ 5399 struct lpfc_nodelist * 5400 lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi) 5401 { 5402 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 5403 struct lpfc_nodelist *ndlp; 5404 5405 spin_lock_irq(shost->host_lock); 5406 ndlp = __lpfc_findnode_rpi(vport, rpi); 5407 spin_unlock_irq(shost->host_lock); 5408 return ndlp; 5409 } 5410 5411 /** 5412 * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier 5413 * @phba: pointer to lpfc hba data structure. 5414 * @vpi: the physical host virtual N_Port identifier. 5415 * 5416 * This routine finds a vport on a HBA (referred by @phba) through a 5417 * @vpi. The function walks the HBA's vport list and returns the address 5418 * of the vport with the matching @vpi. 5419 * 5420 * Return code 5421 * NULL - No vport with the matching @vpi found 5422 * Otherwise - Address to the vport with the matching @vpi. 5423 **/ 5424 struct lpfc_vport * 5425 lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) 5426 { 5427 struct lpfc_vport *vport; 5428 unsigned long flags; 5429 int i = 0; 5430 5431 /* The physical ports are always vpi 0 - translate is unnecessary. */ 5432 if (vpi > 0) { 5433 /* 5434 * Translate the physical vpi to the logical vpi. The 5435 * vport stores the logical vpi. 5436 */ 5437 for (i = 0; i < phba->max_vpi; i++) { 5438 if (vpi == phba->vpi_ids[i]) 5439 break; 5440 } 5441 5442 if (i >= phba->max_vpi) { 5443 lpfc_printf_log(phba, KERN_ERR, LOG_ELS, 5444 "2936 Could not find Vport mapped " 5445 "to vpi %d\n", vpi); 5446 return NULL; 5447 } 5448 } 5449 5450 spin_lock_irqsave(&phba->hbalock, flags); 5451 list_for_each_entry(vport, &phba->port_list, listentry) { 5452 if (vport->vpi == i) { 5453 spin_unlock_irqrestore(&phba->hbalock, flags); 5454 return vport; 5455 } 5456 } 5457 spin_unlock_irqrestore(&phba->hbalock, flags); 5458 return NULL; 5459 } 5460 5461 void 5462 lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, 5463 uint32_t did) 5464 { 5465 memset(ndlp, 0, sizeof (struct lpfc_nodelist)); 5466 5467 lpfc_initialize_node(vport, ndlp, did); 5468 INIT_LIST_HEAD(&ndlp->nlp_listp); 5469 5470 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, 5471 "node init: did:x%x", 5472 ndlp->nlp_DID, 0, 0); 5473 5474 return; 5475 } 5476 5477 /* This routine releases all resources associated with a specifc NPort's ndlp 5478 * and mempool_free's the nodelist. 5479 */ 5480 static void 5481 lpfc_nlp_release(struct kref *kref) 5482 { 5483 struct lpfc_hba *phba; 5484 unsigned long flags; 5485 struct lpfc_nodelist *ndlp = container_of(kref, struct lpfc_nodelist, 5486 kref); 5487 5488 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, 5489 "node release: did:x%x flg:x%x type:x%x", 5490 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); 5491 5492 lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE, 5493 "0279 lpfc_nlp_release: ndlp:x%p " 5494 "usgmap:x%x refcnt:%d\n", 5495 (void *)ndlp, ndlp->nlp_usg_map, 5496 atomic_read(&ndlp->kref.refcount)); 5497 5498 /* remove ndlp from action. */ 5499 lpfc_nlp_remove(ndlp->vport, ndlp); 5500 5501 /* clear the ndlp active flag for all release cases */ 5502 phba = ndlp->phba; 5503 spin_lock_irqsave(&phba->ndlp_lock, flags); 5504 NLP_CLR_NODE_ACT(ndlp); 5505 spin_unlock_irqrestore(&phba->ndlp_lock, flags); 5506 if (phba->sli_rev == LPFC_SLI_REV4) 5507 lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi); 5508 5509 /* free ndlp memory for final ndlp release */ 5510 if (NLP_CHK_FREE_REQ(ndlp)) { 5511 kfree(ndlp->lat_data); 5512 mempool_free(ndlp, ndlp->phba->nlp_mem_pool); 5513 } 5514 } 5515 5516 /* This routine bumps the reference count for a ndlp structure to ensure 5517 * that one discovery thread won't free a ndlp while another discovery thread 5518 * is using it. 5519 */ 5520 struct lpfc_nodelist * 5521 lpfc_nlp_get(struct lpfc_nodelist *ndlp) 5522 { 5523 struct lpfc_hba *phba; 5524 unsigned long flags; 5525 5526 if (ndlp) { 5527 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, 5528 "node get: did:x%x flg:x%x refcnt:x%x", 5529 ndlp->nlp_DID, ndlp->nlp_flag, 5530 atomic_read(&ndlp->kref.refcount)); 5531 /* The check of ndlp usage to prevent incrementing the 5532 * ndlp reference count that is in the process of being 5533 * released. 5534 */ 5535 phba = ndlp->phba; 5536 spin_lock_irqsave(&phba->ndlp_lock, flags); 5537 if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) { 5538 spin_unlock_irqrestore(&phba->ndlp_lock, flags); 5539 lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE, 5540 "0276 lpfc_nlp_get: ndlp:x%p " 5541 "usgmap:x%x refcnt:%d\n", 5542 (void *)ndlp, ndlp->nlp_usg_map, 5543 atomic_read(&ndlp->kref.refcount)); 5544 return NULL; 5545 } else 5546 kref_get(&ndlp->kref); 5547 spin_unlock_irqrestore(&phba->ndlp_lock, flags); 5548 } 5549 return ndlp; 5550 } 5551 5552 /* This routine decrements the reference count for a ndlp structure. If the 5553 * count goes to 0, this indicates the the associated nodelist should be 5554 * freed. Returning 1 indicates the ndlp resource has been released; on the 5555 * other hand, returning 0 indicates the ndlp resource has not been released 5556 * yet. 5557 */ 5558 int 5559 lpfc_nlp_put(struct lpfc_nodelist *ndlp) 5560 { 5561 struct lpfc_hba *phba; 5562 unsigned long flags; 5563 5564 if (!ndlp) 5565 return 1; 5566 5567 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, 5568 "node put: did:x%x flg:x%x refcnt:x%x", 5569 ndlp->nlp_DID, ndlp->nlp_flag, 5570 atomic_read(&ndlp->kref.refcount)); 5571 phba = ndlp->phba; 5572 spin_lock_irqsave(&phba->ndlp_lock, flags); 5573 /* Check the ndlp memory free acknowledge flag to avoid the 5574 * possible race condition that kref_put got invoked again 5575 * after previous one has done ndlp memory free. 5576 */ 5577 if (NLP_CHK_FREE_ACK(ndlp)) { 5578 spin_unlock_irqrestore(&phba->ndlp_lock, flags); 5579 lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE, 5580 "0274 lpfc_nlp_put: ndlp:x%p " 5581 "usgmap:x%x refcnt:%d\n", 5582 (void *)ndlp, ndlp->nlp_usg_map, 5583 atomic_read(&ndlp->kref.refcount)); 5584 return 1; 5585 } 5586 /* Check the ndlp inactivate log flag to avoid the possible 5587 * race condition that kref_put got invoked again after ndlp 5588 * is already in inactivating state. 5589 */ 5590 if (NLP_CHK_IACT_REQ(ndlp)) { 5591 spin_unlock_irqrestore(&phba->ndlp_lock, flags); 5592 lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE, 5593 "0275 lpfc_nlp_put: ndlp:x%p " 5594 "usgmap:x%x refcnt:%d\n", 5595 (void *)ndlp, ndlp->nlp_usg_map, 5596 atomic_read(&ndlp->kref.refcount)); 5597 return 1; 5598 } 5599 /* For last put, mark the ndlp usage flags to make sure no 5600 * other kref_get and kref_put on the same ndlp shall get 5601 * in between the process when the final kref_put has been 5602 * invoked on this ndlp. 5603 */ 5604 if (atomic_read(&ndlp->kref.refcount) == 1) { 5605 /* Indicate ndlp is put to inactive state. */ 5606 NLP_SET_IACT_REQ(ndlp); 5607 /* Acknowledge ndlp memory free has been seen. */ 5608 if (NLP_CHK_FREE_REQ(ndlp)) 5609 NLP_SET_FREE_ACK(ndlp); 5610 } 5611 spin_unlock_irqrestore(&phba->ndlp_lock, flags); 5612 /* Note, the kref_put returns 1 when decrementing a reference 5613 * count that was 1, it invokes the release callback function, 5614 * but it still left the reference count as 1 (not actually 5615 * performs the last decrementation). Otherwise, it actually 5616 * decrements the reference count and returns 0. 5617 */ 5618 return kref_put(&ndlp->kref, lpfc_nlp_release); 5619 } 5620 5621 /* This routine free's the specified nodelist if it is not in use 5622 * by any other discovery thread. This routine returns 1 if the 5623 * ndlp has been freed. A return value of 0 indicates the ndlp is 5624 * not yet been released. 5625 */ 5626 int 5627 lpfc_nlp_not_used(struct lpfc_nodelist *ndlp) 5628 { 5629 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, 5630 "node not used: did:x%x flg:x%x refcnt:x%x", 5631 ndlp->nlp_DID, ndlp->nlp_flag, 5632 atomic_read(&ndlp->kref.refcount)); 5633 if (atomic_read(&ndlp->kref.refcount) == 1) 5634 if (lpfc_nlp_put(ndlp)) 5635 return 1; 5636 return 0; 5637 } 5638 5639 /** 5640 * lpfc_fcf_inuse - Check if FCF can be unregistered. 5641 * @phba: Pointer to hba context object. 5642 * 5643 * This function iterate through all FC nodes associated 5644 * will all vports to check if there is any node with 5645 * fc_rports associated with it. If there is an fc_rport 5646 * associated with the node, then the node is either in 5647 * discovered state or its devloss_timer is pending. 5648 */ 5649 static int 5650 lpfc_fcf_inuse(struct lpfc_hba *phba) 5651 { 5652 struct lpfc_vport **vports; 5653 int i, ret = 0; 5654 struct lpfc_nodelist *ndlp; 5655 struct Scsi_Host *shost; 5656 5657 vports = lpfc_create_vport_work_array(phba); 5658 5659 /* If driver cannot allocate memory, indicate fcf is in use */ 5660 if (!vports) 5661 return 1; 5662 5663 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { 5664 shost = lpfc_shost_from_vport(vports[i]); 5665 spin_lock_irq(shost->host_lock); 5666 /* 5667 * IF the CVL_RCVD bit is not set then we have sent the 5668 * flogi. 5669 * If dev_loss fires while we are waiting we do not want to 5670 * unreg the fcf. 5671 */ 5672 if (!(vports[i]->fc_flag & FC_VPORT_CVL_RCVD)) { 5673 spin_unlock_irq(shost->host_lock); 5674 ret = 1; 5675 goto out; 5676 } 5677 list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) { 5678 if (NLP_CHK_NODE_ACT(ndlp) && ndlp->rport && 5679 (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) { 5680 ret = 1; 5681 spin_unlock_irq(shost->host_lock); 5682 goto out; 5683 } else if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { 5684 ret = 1; 5685 lpfc_printf_log(phba, KERN_INFO, LOG_ELS, 5686 "2624 RPI %x DID %x flag %x " 5687 "still logged in\n", 5688 ndlp->nlp_rpi, ndlp->nlp_DID, 5689 ndlp->nlp_flag); 5690 } 5691 } 5692 spin_unlock_irq(shost->host_lock); 5693 } 5694 out: 5695 lpfc_destroy_vport_work_array(phba, vports); 5696 return ret; 5697 } 5698 5699 /** 5700 * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi. 5701 * @phba: Pointer to hba context object. 5702 * @mboxq: Pointer to mailbox object. 5703 * 5704 * This function frees memory associated with the mailbox command. 5705 */ 5706 void 5707 lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 5708 { 5709 struct lpfc_vport *vport = mboxq->vport; 5710 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 5711 5712 if (mboxq->u.mb.mbxStatus) { 5713 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX, 5714 "2555 UNREG_VFI mbxStatus error x%x " 5715 "HBA state x%x\n", 5716 mboxq->u.mb.mbxStatus, vport->port_state); 5717 } 5718 spin_lock_irq(shost->host_lock); 5719 phba->pport->fc_flag &= ~FC_VFI_REGISTERED; 5720 spin_unlock_irq(shost->host_lock); 5721 mempool_free(mboxq, phba->mbox_mem_pool); 5722 return; 5723 } 5724 5725 /** 5726 * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi. 5727 * @phba: Pointer to hba context object. 5728 * @mboxq: Pointer to mailbox object. 5729 * 5730 * This function frees memory associated with the mailbox command. 5731 */ 5732 static void 5733 lpfc_unregister_fcfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) 5734 { 5735 struct lpfc_vport *vport = mboxq->vport; 5736 5737 if (mboxq->u.mb.mbxStatus) { 5738 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX, 5739 "2550 UNREG_FCFI mbxStatus error x%x " 5740 "HBA state x%x\n", 5741 mboxq->u.mb.mbxStatus, vport->port_state); 5742 } 5743 mempool_free(mboxq, phba->mbox_mem_pool); 5744 return; 5745 } 5746 5747 /** 5748 * lpfc_unregister_fcf_prep - Unregister fcf record preparation 5749 * @phba: Pointer to hba context object. 5750 * 5751 * This function prepare the HBA for unregistering the currently registered 5752 * FCF from the HBA. It performs unregistering, in order, RPIs, VPIs, and 5753 * VFIs. 5754 */ 5755 int 5756 lpfc_unregister_fcf_prep(struct lpfc_hba *phba) 5757 { 5758 struct lpfc_vport **vports; 5759 struct lpfc_nodelist *ndlp; 5760 struct Scsi_Host *shost; 5761 int i, rc; 5762 5763 /* Unregister RPIs */ 5764 if (lpfc_fcf_inuse(phba)) 5765 lpfc_unreg_hba_rpis(phba); 5766 5767 /* At this point, all discovery is aborted */ 5768 phba->pport->port_state = LPFC_VPORT_UNKNOWN; 5769 5770 /* Unregister VPIs */ 5771 vports = lpfc_create_vport_work_array(phba); 5772 if (vports && (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) 5773 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { 5774 /* Stop FLOGI/FDISC retries */ 5775 ndlp = lpfc_findnode_did(vports[i], Fabric_DID); 5776 if (ndlp) 5777 lpfc_cancel_retry_delay_tmo(vports[i], ndlp); 5778 lpfc_cleanup_pending_mbox(vports[i]); 5779 if (phba->sli_rev == LPFC_SLI_REV4) 5780 lpfc_sli4_unreg_all_rpis(vports[i]); 5781 lpfc_mbx_unreg_vpi(vports[i]); 5782 shost = lpfc_shost_from_vport(vports[i]); 5783 spin_lock_irq(shost->host_lock); 5784 vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; 5785 vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED; 5786 spin_unlock_irq(shost->host_lock); 5787 } 5788 lpfc_destroy_vport_work_array(phba, vports); 5789 5790 /* Cleanup any outstanding ELS commands */ 5791 lpfc_els_flush_all_cmd(phba); 5792 5793 /* Unregister the physical port VFI */ 5794 rc = lpfc_issue_unreg_vfi(phba->pport); 5795 return rc; 5796 } 5797 5798 /** 5799 * lpfc_sli4_unregister_fcf - Unregister currently registered FCF record 5800 * @phba: Pointer to hba context object. 5801 * 5802 * This function issues synchronous unregister FCF mailbox command to HBA to 5803 * unregister the currently registered FCF record. The driver does not reset 5804 * the driver FCF usage state flags. 5805 * 5806 * Return 0 if successfully issued, none-zero otherwise. 5807 */ 5808 int 5809 lpfc_sli4_unregister_fcf(struct lpfc_hba *phba) 5810 { 5811 LPFC_MBOXQ_t *mbox; 5812 int rc; 5813 5814 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 5815 if (!mbox) { 5816 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX, 5817 "2551 UNREG_FCFI mbox allocation failed" 5818 "HBA state x%x\n", phba->pport->port_state); 5819 return -ENOMEM; 5820 } 5821 lpfc_unreg_fcfi(mbox, phba->fcf.fcfi); 5822 mbox->vport = phba->pport; 5823 mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl; 5824 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); 5825 5826 if (rc == MBX_NOT_FINISHED) { 5827 lpfc_printf_log(phba, KERN_ERR, LOG_SLI, 5828 "2552 Unregister FCFI command failed rc x%x " 5829 "HBA state x%x\n", 5830 rc, phba->pport->port_state); 5831 return -EINVAL; 5832 } 5833 return 0; 5834 } 5835 5836 /** 5837 * lpfc_unregister_fcf_rescan - Unregister currently registered fcf and rescan 5838 * @phba: Pointer to hba context object. 5839 * 5840 * This function unregisters the currently reigstered FCF. This function 5841 * also tries to find another FCF for discovery by rescan the HBA FCF table. 5842 */ 5843 void 5844 lpfc_unregister_fcf_rescan(struct lpfc_hba *phba) 5845 { 5846 int rc; 5847 5848 /* Preparation for unregistering fcf */ 5849 rc = lpfc_unregister_fcf_prep(phba); 5850 if (rc) { 5851 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, 5852 "2748 Failed to prepare for unregistering " 5853 "HBA's FCF record: rc=%d\n", rc); 5854 return; 5855 } 5856 5857 /* Now, unregister FCF record and reset HBA FCF state */ 5858 rc = lpfc_sli4_unregister_fcf(phba); 5859 if (rc) 5860 return; 5861 /* Reset HBA FCF states after successful unregister FCF */ 5862 phba->fcf.fcf_flag = 0; 5863 phba->fcf.current_rec.flag = 0; 5864 5865 /* 5866 * If driver is not unloading, check if there is any other 5867 * FCF record that can be used for discovery. 5868 */ 5869 if ((phba->pport->load_flag & FC_UNLOADING) || 5870 (phba->link_state < LPFC_LINK_UP)) 5871 return; 5872 5873 /* This is considered as the initial FCF discovery scan */ 5874 spin_lock_irq(&phba->hbalock); 5875 phba->fcf.fcf_flag |= FCF_INIT_DISC; 5876 spin_unlock_irq(&phba->hbalock); 5877 5878 /* Reset FCF roundrobin bmask for new discovery */ 5879 lpfc_sli4_clear_fcf_rr_bmask(phba); 5880 5881 rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST); 5882 5883 if (rc) { 5884 spin_lock_irq(&phba->hbalock); 5885 phba->fcf.fcf_flag &= ~FCF_INIT_DISC; 5886 spin_unlock_irq(&phba->hbalock); 5887 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX, 5888 "2553 lpfc_unregister_unused_fcf failed " 5889 "to read FCF record HBA state x%x\n", 5890 phba->pport->port_state); 5891 } 5892 } 5893 5894 /** 5895 * lpfc_unregister_fcf - Unregister the currently registered fcf record 5896 * @phba: Pointer to hba context object. 5897 * 5898 * This function just unregisters the currently reigstered FCF. It does not 5899 * try to find another FCF for discovery. 5900 */ 5901 void 5902 lpfc_unregister_fcf(struct lpfc_hba *phba) 5903 { 5904 int rc; 5905 5906 /* Preparation for unregistering fcf */ 5907 rc = lpfc_unregister_fcf_prep(phba); 5908 if (rc) { 5909 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, 5910 "2749 Failed to prepare for unregistering " 5911 "HBA's FCF record: rc=%d\n", rc); 5912 return; 5913 } 5914 5915 /* Now, unregister FCF record and reset HBA FCF state */ 5916 rc = lpfc_sli4_unregister_fcf(phba); 5917 if (rc) 5918 return; 5919 /* Set proper HBA FCF states after successful unregister FCF */ 5920 spin_lock_irq(&phba->hbalock); 5921 phba->fcf.fcf_flag &= ~FCF_REGISTERED; 5922 spin_unlock_irq(&phba->hbalock); 5923 } 5924 5925 /** 5926 * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected. 5927 * @phba: Pointer to hba context object. 5928 * 5929 * This function check if there are any connected remote port for the FCF and 5930 * if all the devices are disconnected, this function unregister FCFI. 5931 * This function also tries to use another FCF for discovery. 5932 */ 5933 void 5934 lpfc_unregister_unused_fcf(struct lpfc_hba *phba) 5935 { 5936 /* 5937 * If HBA is not running in FIP mode, if HBA does not support 5938 * FCoE, if FCF discovery is ongoing, or if FCF has not been 5939 * registered, do nothing. 5940 */ 5941 spin_lock_irq(&phba->hbalock); 5942 if (!(phba->hba_flag & HBA_FCOE_MODE) || 5943 !(phba->fcf.fcf_flag & FCF_REGISTERED) || 5944 !(phba->hba_flag & HBA_FIP_SUPPORT) || 5945 (phba->fcf.fcf_flag & FCF_DISCOVERY) || 5946 (phba->pport->port_state == LPFC_FLOGI)) { 5947 spin_unlock_irq(&phba->hbalock); 5948 return; 5949 } 5950 spin_unlock_irq(&phba->hbalock); 5951 5952 if (lpfc_fcf_inuse(phba)) 5953 return; 5954 5955 lpfc_unregister_fcf_rescan(phba); 5956 } 5957 5958 /** 5959 * lpfc_read_fcf_conn_tbl - Create driver FCF connection table. 5960 * @phba: Pointer to hba context object. 5961 * @buff: Buffer containing the FCF connection table as in the config 5962 * region. 5963 * This function create driver data structure for the FCF connection 5964 * record table read from config region 23. 5965 */ 5966 static void 5967 lpfc_read_fcf_conn_tbl(struct lpfc_hba *phba, 5968 uint8_t *buff) 5969 { 5970 struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry; 5971 struct lpfc_fcf_conn_hdr *conn_hdr; 5972 struct lpfc_fcf_conn_rec *conn_rec; 5973 uint32_t record_count; 5974 int i; 5975 5976 /* Free the current connect table */ 5977 list_for_each_entry_safe(conn_entry, next_conn_entry, 5978 &phba->fcf_conn_rec_list, list) { 5979 list_del_init(&conn_entry->list); 5980 kfree(conn_entry); 5981 } 5982 5983 conn_hdr = (struct lpfc_fcf_conn_hdr *) buff; 5984 record_count = conn_hdr->length * sizeof(uint32_t)/ 5985 sizeof(struct lpfc_fcf_conn_rec); 5986 5987 conn_rec = (struct lpfc_fcf_conn_rec *) 5988 (buff + sizeof(struct lpfc_fcf_conn_hdr)); 5989 5990 for (i = 0; i < record_count; i++) { 5991 if (!(conn_rec[i].flags & FCFCNCT_VALID)) 5992 continue; 5993 conn_entry = kzalloc(sizeof(struct lpfc_fcf_conn_entry), 5994 GFP_KERNEL); 5995 if (!conn_entry) { 5996 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 5997 "2566 Failed to allocate connection" 5998 " table entry\n"); 5999 return; 6000 } 6001 6002 memcpy(&conn_entry->conn_rec, &conn_rec[i], 6003 sizeof(struct lpfc_fcf_conn_rec)); 6004 conn_entry->conn_rec.vlan_tag = 6005 le16_to_cpu(conn_entry->conn_rec.vlan_tag) & 0xFFF; 6006 conn_entry->conn_rec.flags = 6007 le16_to_cpu(conn_entry->conn_rec.flags); 6008 list_add_tail(&conn_entry->list, 6009 &phba->fcf_conn_rec_list); 6010 } 6011 } 6012 6013 /** 6014 * lpfc_read_fcoe_param - Read FCoe parameters from conf region.. 6015 * @phba: Pointer to hba context object. 6016 * @buff: Buffer containing the FCoE parameter data structure. 6017 * 6018 * This function update driver data structure with config 6019 * parameters read from config region 23. 6020 */ 6021 static void 6022 lpfc_read_fcoe_param(struct lpfc_hba *phba, 6023 uint8_t *buff) 6024 { 6025 struct lpfc_fip_param_hdr *fcoe_param_hdr; 6026 struct lpfc_fcoe_params *fcoe_param; 6027 6028 fcoe_param_hdr = (struct lpfc_fip_param_hdr *) 6029 buff; 6030 fcoe_param = (struct lpfc_fcoe_params *) 6031 (buff + sizeof(struct lpfc_fip_param_hdr)); 6032 6033 if ((fcoe_param_hdr->parm_version != FIPP_VERSION) || 6034 (fcoe_param_hdr->length != FCOE_PARAM_LENGTH)) 6035 return; 6036 6037 if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) { 6038 phba->valid_vlan = 1; 6039 phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) & 6040 0xFFF; 6041 } 6042 6043 phba->fc_map[0] = fcoe_param->fc_map[0]; 6044 phba->fc_map[1] = fcoe_param->fc_map[1]; 6045 phba->fc_map[2] = fcoe_param->fc_map[2]; 6046 return; 6047 } 6048 6049 /** 6050 * lpfc_get_rec_conf23 - Get a record type in config region data. 6051 * @buff: Buffer containing config region 23 data. 6052 * @size: Size of the data buffer. 6053 * @rec_type: Record type to be searched. 6054 * 6055 * This function searches config region data to find the beginning 6056 * of the record specified by record_type. If record found, this 6057 * function return pointer to the record else return NULL. 6058 */ 6059 static uint8_t * 6060 lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type) 6061 { 6062 uint32_t offset = 0, rec_length; 6063 6064 if ((buff[0] == LPFC_REGION23_LAST_REC) || 6065 (size < sizeof(uint32_t))) 6066 return NULL; 6067 6068 rec_length = buff[offset + 1]; 6069 6070 /* 6071 * One TLV record has one word header and number of data words 6072 * specified in the rec_length field of the record header. 6073 */ 6074 while ((offset + rec_length * sizeof(uint32_t) + sizeof(uint32_t)) 6075 <= size) { 6076 if (buff[offset] == rec_type) 6077 return &buff[offset]; 6078 6079 if (buff[offset] == LPFC_REGION23_LAST_REC) 6080 return NULL; 6081 6082 offset += rec_length * sizeof(uint32_t) + sizeof(uint32_t); 6083 rec_length = buff[offset + 1]; 6084 } 6085 return NULL; 6086 } 6087 6088 /** 6089 * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23. 6090 * @phba: Pointer to lpfc_hba data structure. 6091 * @buff: Buffer containing config region 23 data. 6092 * @size: Size of the data buffer. 6093 * 6094 * This function parses the FCoE config parameters in config region 23 and 6095 * populate driver data structure with the parameters. 6096 */ 6097 void 6098 lpfc_parse_fcoe_conf(struct lpfc_hba *phba, 6099 uint8_t *buff, 6100 uint32_t size) 6101 { 6102 uint32_t offset = 0, rec_length; 6103 uint8_t *rec_ptr; 6104 6105 /* 6106 * If data size is less than 2 words signature and version cannot be 6107 * verified. 6108 */ 6109 if (size < 2*sizeof(uint32_t)) 6110 return; 6111 6112 /* Check the region signature first */ 6113 if (memcmp(buff, LPFC_REGION23_SIGNATURE, 4)) { 6114 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 6115 "2567 Config region 23 has bad signature\n"); 6116 return; 6117 } 6118 6119 offset += 4; 6120 6121 /* Check the data structure version */ 6122 if (buff[offset] != LPFC_REGION23_VERSION) { 6123 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 6124 "2568 Config region 23 has bad version\n"); 6125 return; 6126 } 6127 offset += 4; 6128 6129 rec_length = buff[offset + 1]; 6130 6131 /* Read FCoE param record */ 6132 rec_ptr = lpfc_get_rec_conf23(&buff[offset], 6133 size - offset, FCOE_PARAM_TYPE); 6134 if (rec_ptr) 6135 lpfc_read_fcoe_param(phba, rec_ptr); 6136 6137 /* Read FCF connection table */ 6138 rec_ptr = lpfc_get_rec_conf23(&buff[offset], 6139 size - offset, FCOE_CONN_TBL_TYPE); 6140 if (rec_ptr) 6141 lpfc_read_fcf_conn_tbl(phba, rec_ptr); 6142 6143 } 6144