xref: /openbmc/linux/drivers/scsi/lpfc/lpfc_disc.h (revision 5d331b7f)
1 /*******************************************************************
2  * This file is part of the Emulex Linux Device Driver for         *
3  * Fibre Channel Host Bus Adapters.                                *
4  * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
5  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
6  * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
7  * EMULEX and SLI are trademarks of Emulex.                        *
8  * www.broadcom.com                                                *
9  *                                                                 *
10  * This program is free software; you can redistribute it and/or   *
11  * modify it under the terms of version 2 of the GNU General       *
12  * Public License as published by the Free Software Foundation.    *
13  * This program is distributed in the hope that it will be useful. *
14  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
15  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
16  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
17  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
18  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
19  * more details, a copy of which can be found in the file COPYING  *
20  * included with this package.                                     *
21  *******************************************************************/
22 
23 #define FC_MAX_HOLD_RSCN     32	      /* max number of deferred RSCNs */
24 #define FC_MAX_NS_RSP        64512    /* max size NameServer rsp */
25 #define FC_MAXLOOP           126      /* max devices supported on a fc loop */
26 #define LPFC_DISC_FLOGI_TMO  10	      /* Discovery FLOGI ratov */
27 
28 
29 /* This is the protocol dependent definition for a Node List Entry.
30  * This is used by Fibre Channel protocol to support FCP.
31  */
32 
33 /* worker thread events */
34 enum lpfc_work_type {
35 	LPFC_EVT_ONLINE,
36 	LPFC_EVT_OFFLINE_PREP,
37 	LPFC_EVT_OFFLINE,
38 	LPFC_EVT_WARM_START,
39 	LPFC_EVT_KILL,
40 	LPFC_EVT_ELS_RETRY,
41 	LPFC_EVT_DEV_LOSS,
42 	LPFC_EVT_FASTPATH_MGMT_EVT,
43 	LPFC_EVT_RESET_HBA,
44 };
45 
46 /* structure used to queue event to the discovery tasklet */
47 struct lpfc_work_evt {
48 	struct list_head      evt_listp;
49 	void                 *evt_arg1;
50 	void                 *evt_arg2;
51 	enum lpfc_work_type   evt;
52 };
53 
54 struct lpfc_scsi_check_condition_event;
55 struct lpfc_scsi_varqueuedepth_event;
56 struct lpfc_scsi_event_header;
57 struct lpfc_fabric_event_header;
58 struct lpfc_fcprdchkerr_event;
59 
60 /* structure used for sending events from fast path */
61 struct lpfc_fast_path_event {
62 	struct lpfc_work_evt work_evt;
63 	struct lpfc_vport     *vport;
64 	union {
65 		struct lpfc_scsi_check_condition_event check_cond_evt;
66 		struct lpfc_scsi_varqueuedepth_event queue_depth_evt;
67 		struct lpfc_scsi_event_header scsi_evt;
68 		struct lpfc_fabric_event_header fabric_evt;
69 		struct lpfc_fcprdchkerr_event read_check_error;
70 	} un;
71 };
72 
73 #define LPFC_SLI4_MAX_XRI	1024	/* Used to make the ndlp's xri_bitmap */
74 #define XRI_BITMAP_ULONGS (LPFC_SLI4_MAX_XRI / BITS_PER_LONG)
75 struct lpfc_node_rrqs {
76 	unsigned long xri_bitmap[XRI_BITMAP_ULONGS];
77 };
78 
79 struct lpfc_nodelist {
80 	struct list_head nlp_listp;
81 	struct lpfc_name nlp_portname;
82 	struct lpfc_name nlp_nodename;
83 	uint32_t         nlp_flag;		/* entry flags */
84 	uint32_t         nlp_DID;		/* FC D_ID of entry */
85 	uint32_t         nlp_last_elscmd;	/* Last ELS cmd sent */
86 	uint16_t         nlp_type;
87 #define NLP_FC_NODE        0x1			/* entry is an FC node */
88 #define NLP_FABRIC         0x4			/* entry rep a Fabric entity */
89 #define NLP_FCP_TARGET     0x8			/* entry is an FCP target */
90 #define NLP_FCP_INITIATOR  0x10			/* entry is an FCP Initiator */
91 #define NLP_NVME_TARGET    0x20			/* entry is a NVME Target */
92 #define NLP_NVME_INITIATOR 0x40			/* entry is a NVME Initiator */
93 #define NLP_NVME_DISCOVERY 0x80                 /* entry has NVME disc srvc */
94 
95 	uint16_t	nlp_fc4_type;		/* FC types node supports. */
96 						/* Assigned from GID_FF, only
97 						 * FCP (0x8) and NVME (0x28)
98 						 * supported.
99 						 */
100 #define NLP_FC4_NONE	0x0
101 #define NLP_FC4_FCP	0x1			/* FC4 Type FCP (value x8)) */
102 #define NLP_FC4_NVME	0x2			/* FC4 TYPE NVME (value x28) */
103 
104 	uint16_t        nlp_rpi;
105 	uint16_t        nlp_state;		/* state transition indicator */
106 	uint16_t        nlp_prev_state;		/* state transition indicator */
107 	uint16_t        nlp_xri;		/* output exchange id for RPI */
108 	uint16_t        nlp_sid;		/* scsi id */
109 #define NLP_NO_SID		0xffff
110 	uint16_t	nlp_maxframe;		/* Max RCV frame size */
111 	uint8_t		nlp_class_sup;		/* Supported Classes */
112 	uint8_t         nlp_retry;		/* used for ELS retries */
113 	uint8_t         nlp_fcp_info;	        /* class info, bits 0-3 */
114 #define NLP_FCP_2_DEVICE   0x10			/* FCP-2 device */
115 
116 	uint16_t        nlp_usg_map;	/* ndlp management usage bitmap */
117 #define NLP_USG_NODE_ACT_BIT	0x1	/* Indicate ndlp is actively used */
118 #define NLP_USG_IACT_REQ_BIT	0x2	/* Request to inactivate ndlp */
119 #define NLP_USG_FREE_REQ_BIT	0x4	/* Request to invoke ndlp memory free */
120 #define NLP_USG_FREE_ACK_BIT	0x8	/* Indicate ndlp memory free invoked */
121 
122 	struct timer_list   nlp_delayfunc;	/* Used for delayed ELS cmds */
123 	struct lpfc_hba *phba;
124 	struct fc_rport *rport;		/* scsi_transport_fc port structure */
125 	struct lpfc_nvme_rport *nrport;	/* nvme transport rport struct. */
126 	struct lpfc_vport *vport;
127 	struct lpfc_work_evt els_retry_evt;
128 	struct lpfc_work_evt dev_loss_evt;
129 	struct kref     kref;
130 	atomic_t cmd_pending;
131 	uint32_t cmd_qdepth;
132 	unsigned long last_change_time;
133 	unsigned long *active_rrqs_xri_bitmap;
134 	struct lpfc_scsicmd_bkt *lat_data;	/* Latency data */
135 	uint32_t fc4_prli_sent;
136 	uint32_t upcall_flags;
137 #define NLP_WAIT_FOR_UNREG    0x1
138 
139 	uint32_t nvme_fb_size; /* NVME target's supported byte cnt */
140 #define NVME_FB_BIT_SHIFT 9    /* PRLI Rsp first burst in 512B units. */
141 };
142 struct lpfc_node_rrq {
143 	struct list_head list;
144 	uint16_t xritag;
145 	uint16_t send_rrq;
146 	uint16_t rxid;
147 	uint32_t         nlp_DID;		/* FC D_ID of entry */
148 	struct lpfc_vport *vport;
149 	struct lpfc_nodelist *ndlp;
150 	unsigned long rrq_stop_time;
151 };
152 
153 #define lpfc_ndlp_check_qdepth(phba, ndlp) \
154 	(ndlp->cmd_qdepth < phba->sli4_hba.max_cfg_param.max_xri)
155 
156 /* Defines for nlp_flag (uint32) */
157 #define NLP_IGNR_REG_CMPL  0x00000001 /* Rcvd rscn before we cmpl reg login */
158 #define NLP_REG_LOGIN_SEND 0x00000002   /* sent reglogin to adapter */
159 #define NLP_SUPPRESS_RSP   0x00000010	/* Remote NPort supports suppress rsp */
160 #define NLP_PLOGI_SND      0x00000020	/* sent PLOGI request for this entry */
161 #define NLP_PRLI_SND       0x00000040	/* sent PRLI request for this entry */
162 #define NLP_ADISC_SND      0x00000080	/* sent ADISC request for this entry */
163 #define NLP_LOGO_SND       0x00000100	/* sent LOGO request for this entry */
164 #define NLP_RNID_SND       0x00000400	/* sent RNID request for this entry */
165 #define NLP_ELS_SND_MASK   0x000007e0	/* sent ELS request for this entry */
166 #define NLP_NVMET_RECOV    0x00001000   /* NVMET auditing node for recovery. */
167 #define NLP_FCP_PRLI_RJT   0x00002000   /* Rport does not support FCP PRLI. */
168 #define NLP_DEFER_RM       0x00010000	/* Remove this ndlp if no longer used */
169 #define NLP_DELAY_TMO      0x00020000	/* delay timeout is running for node */
170 #define NLP_NPR_2B_DISC    0x00040000	/* node is included in num_disc_nodes */
171 #define NLP_RCV_PLOGI      0x00080000	/* Rcv'ed PLOGI from remote system */
172 #define NLP_LOGO_ACC       0x00100000	/* Process LOGO after ACC completes */
173 #define NLP_TGT_NO_SCSIID  0x00200000	/* good PRLI but no binding for scsid */
174 #define NLP_ISSUE_LOGO     0x00400000	/* waiting to issue a LOGO */
175 #define NLP_IN_DEV_LOSS    0x00800000	/* devloss in progress */
176 #define NLP_ACC_REGLOGIN   0x01000000	/* Issue Reg Login after successful
177 					   ACC */
178 #define NLP_NPR_ADISC      0x02000000	/* Issue ADISC when dq'ed from
179 					   NPR list */
180 #define NLP_RM_DFLT_RPI    0x04000000	/* need to remove leftover dflt RPI */
181 #define NLP_NODEV_REMOVE   0x08000000	/* Defer removal till discovery ends */
182 #define NLP_TARGET_REMOVE  0x10000000   /* Target remove in process */
183 #define NLP_SC_REQ         0x20000000	/* Target requires authentication */
184 #define NLP_FIRSTBURST     0x40000000	/* Target supports FirstBurst */
185 #define NLP_RPI_REGISTERED 0x80000000	/* nlp_rpi is valid */
186 
187 
188 /* ndlp usage management macros */
189 #define NLP_CHK_NODE_ACT(ndlp)		(((ndlp)->nlp_usg_map \
190 						& NLP_USG_NODE_ACT_BIT) \
191 					&& \
192 					!((ndlp)->nlp_usg_map \
193 						& NLP_USG_FREE_ACK_BIT))
194 #define NLP_SET_NODE_ACT(ndlp)		((ndlp)->nlp_usg_map \
195 						|= NLP_USG_NODE_ACT_BIT)
196 #define NLP_INT_NODE_ACT(ndlp)		((ndlp)->nlp_usg_map \
197 						= NLP_USG_NODE_ACT_BIT)
198 #define NLP_CLR_NODE_ACT(ndlp)		((ndlp)->nlp_usg_map \
199 						&= ~NLP_USG_NODE_ACT_BIT)
200 #define NLP_CHK_IACT_REQ(ndlp)          ((ndlp)->nlp_usg_map \
201 						& NLP_USG_IACT_REQ_BIT)
202 #define NLP_SET_IACT_REQ(ndlp)          ((ndlp)->nlp_usg_map \
203 						|= NLP_USG_IACT_REQ_BIT)
204 #define NLP_CHK_FREE_REQ(ndlp)		((ndlp)->nlp_usg_map \
205 						& NLP_USG_FREE_REQ_BIT)
206 #define NLP_SET_FREE_REQ(ndlp)		((ndlp)->nlp_usg_map \
207 						|= NLP_USG_FREE_REQ_BIT)
208 #define NLP_CHK_FREE_ACK(ndlp)		((ndlp)->nlp_usg_map \
209 						& NLP_USG_FREE_ACK_BIT)
210 #define NLP_SET_FREE_ACK(ndlp)		((ndlp)->nlp_usg_map \
211 						|= NLP_USG_FREE_ACK_BIT)
212 
213 /* There are 4 different double linked lists nodelist entries can reside on.
214  * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used
215  * when Link Up discovery or Registered State Change Notification (RSCN)
216  * processing is needed.  Each list holds the nodes that require a PLOGI or
217  * ADISC Extended Link Service (ELS) request.  These lists keep track of the
218  * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected
219  * by Link Up) event.  The unmapped_list contains all nodes that have
220  * successfully logged into at the Fibre Channel level.  The
221  * mapped_list will contain all nodes that are mapped FCP targets.
222  *
223  * The bind list is a list of undiscovered (potentially non-existent) nodes
224  * that we have saved binding information on. This information is used when
225  * nodes transition from the unmapped to the mapped list.
226  */
227 
228 /* Defines for nlp_state */
229 #define NLP_STE_UNUSED_NODE       0x0	/* node is just allocated */
230 #define NLP_STE_PLOGI_ISSUE       0x1	/* PLOGI was sent to NL_PORT */
231 #define NLP_STE_ADISC_ISSUE       0x2	/* ADISC was sent to NL_PORT */
232 #define NLP_STE_REG_LOGIN_ISSUE   0x3	/* REG_LOGIN was issued for NL_PORT */
233 #define NLP_STE_PRLI_ISSUE        0x4	/* PRLI was sent to NL_PORT */
234 #define NLP_STE_LOGO_ISSUE	  0x5	/* LOGO was sent to NL_PORT */
235 #define NLP_STE_UNMAPPED_NODE     0x6	/* PRLI completed from NL_PORT */
236 #define NLP_STE_MAPPED_NODE       0x7	/* Identified as a FCP Target */
237 #define NLP_STE_NPR_NODE          0x8	/* NPort disappeared */
238 #define NLP_STE_MAX_STATE         0x9
239 #define NLP_STE_FREED_NODE        0xff	/* node entry was freed to MEM_NLP */
240 
241 /* For UNUSED_NODE state, the node has just been allocated.
242  * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on
243  * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list
244  * and put on the unmapped list. For ADISC processing, the node is taken off
245  * the ADISC list and placed on either the mapped or unmapped list (depending
246  * on its previous state). Once on the unmapped list, a PRLI is issued and the
247  * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is
248  * changed to PRLI_COMPL. If the completion indicates a mapped
249  * node, the node is taken off the unmapped list. The binding list is checked
250  * for a valid binding, or a binding is automatically assigned. If binding
251  * assignment is unsuccessful, the node is left on the unmapped list. If
252  * binding assignment is successful, the associated binding list entry (if
253  * any) is removed, and the node is placed on the mapped list.
254  */
255 /*
256  * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped
257  * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers
258  * expire, all effected nodes will receive a DEVICE_RM event.
259  */
260 /*
261  * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists
262  * to either the ADISC or PLOGI list.  After a Nameserver query or ALPA loopmap
263  * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to /
264  * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated,
265  * we will first process the ADISC list.  32 entries are processed initially and
266  * ADISC is initited for each one.  Completions / Events for each node are
267  * funnelled thru the state machine.  As each node finishes ADISC processing, it
268  * starts ADISC for any nodes waiting for ADISC processing. If no nodes are
269  * waiting, and the ADISC list count is identically 0, then we are done. For
270  * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we
271  * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI
272  * list.  32 entries are processed initially and PLOGI is initited for each one.
273  * Completions / Events for each node are funnelled thru the state machine.  As
274  * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting
275  * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is
276  * identically 0, then we are done. We have now completed discovery / RSCN
277  * handling. Upon completion, ALL nodes should be on either the mapped or
278  * unmapped lists.
279  */
280 
281 /* Defines for Node List Entry Events that could happen */
282 #define NLP_EVT_RCV_PLOGI         0x0	/* Rcv'd an ELS PLOGI command */
283 #define NLP_EVT_RCV_PRLI          0x1	/* Rcv'd an ELS PRLI  command */
284 #define NLP_EVT_RCV_LOGO          0x2	/* Rcv'd an ELS LOGO  command */
285 #define NLP_EVT_RCV_ADISC         0x3	/* Rcv'd an ELS ADISC command */
286 #define NLP_EVT_RCV_PDISC         0x4	/* Rcv'd an ELS PDISC command */
287 #define NLP_EVT_RCV_PRLO          0x5	/* Rcv'd an ELS PRLO  command */
288 #define NLP_EVT_CMPL_PLOGI        0x6	/* Sent an ELS PLOGI command */
289 #define NLP_EVT_CMPL_PRLI         0x7	/* Sent an ELS PRLI  command */
290 #define NLP_EVT_CMPL_LOGO         0x8	/* Sent an ELS LOGO  command */
291 #define NLP_EVT_CMPL_ADISC        0x9	/* Sent an ELS ADISC command */
292 #define NLP_EVT_CMPL_REG_LOGIN    0xa	/* REG_LOGIN mbox cmd completed */
293 #define NLP_EVT_DEVICE_RM         0xb	/* Device not found in NS / ALPAmap */
294 #define NLP_EVT_DEVICE_RECOVERY   0xc	/* Device existence unknown */
295 #define NLP_EVT_MAX_EVENT         0xd
296 
297