1 /******************************************************************* 2 * This file is part of the Emulex Linux Device Driver for * 3 * Fibre Channel Host Bus Adapters. * 4 * Copyright (C) 2017-2021 Broadcom. All Rights Reserved. The term * 5 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * 6 * Copyright (C) 2010-2015 Emulex. All rights reserved. * 7 * EMULEX and SLI are trademarks of Emulex. * 8 * www.broadcom.com * 9 * * 10 * This program is free software; you can redistribute it and/or * 11 * modify it under the terms of version 2 of the GNU General * 12 * Public License as published by the Free Software Foundation. * 13 * This program is distributed in the hope that it will be useful. * 14 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * 15 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * 16 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * 17 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * 18 * TO BE LEGALLY INVALID. See the GNU General Public License for * 19 * more details, a copy of which can be found in the file COPYING * 20 * included with this package. * 21 *******************************************************************/ 22 /* bsg definitions 23 * No pointers to user data are allowed, all application buffers and sizes will 24 * derived through the bsg interface. 25 * 26 * These are the vendor unique structures passed in using the bsg 27 * FC_BSG_HST_VENDOR message code type. 28 */ 29 #define LPFC_BSG_VENDOR_SET_CT_EVENT 1 30 #define LPFC_BSG_VENDOR_GET_CT_EVENT 2 31 #define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3 32 #define LPFC_BSG_VENDOR_DIAG_MODE 4 33 #define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK 5 34 #define LPFC_BSG_VENDOR_GET_MGMT_REV 6 35 #define LPFC_BSG_VENDOR_MBOX 7 36 #define LPFC_BSG_VENDOR_MENLO_CMD 8 37 #define LPFC_BSG_VENDOR_MENLO_DATA 9 38 #define LPFC_BSG_VENDOR_DIAG_MODE_END 10 39 #define LPFC_BSG_VENDOR_LINK_DIAG_TEST 11 40 #define LPFC_BSG_VENDOR_FORCED_LINK_SPEED 14 41 #define LPFC_BSG_VENDOR_RAS_GET_LWPD 16 42 #define LPFC_BSG_VENDOR_RAS_GET_FWLOG 17 43 #define LPFC_BSG_VENDOR_RAS_GET_CONFIG 18 44 #define LPFC_BSG_VENDOR_RAS_SET_CONFIG 19 45 #define LPFC_BSG_VENDOR_GET_TRUNK_INFO 20 46 #define LPFC_BSG_VENDOR_GET_CGNBUF_INFO 21 47 48 struct set_ct_event { 49 uint32_t command; 50 uint32_t type_mask; 51 uint32_t ev_req_id; 52 uint32_t ev_reg_id; 53 }; 54 55 struct get_ct_event { 56 uint32_t command; 57 uint32_t ev_reg_id; 58 uint32_t ev_req_id; 59 }; 60 61 struct get_ct_event_reply { 62 uint32_t immed_data; 63 uint32_t type; 64 }; 65 66 struct send_mgmt_resp { 67 uint32_t command; 68 uint32_t tag; 69 }; 70 71 72 #define DISABLE_LOOP_BACK 0x0 /* disables loop back */ 73 #define INTERNAL_LOOP_BACK 0x1 /* adapter short cuts the loop internally */ 74 #define EXTERNAL_LOOP_BACK 0x2 /* requires an external loopback plug */ 75 76 struct diag_mode_set { 77 uint32_t command; 78 uint32_t type; 79 uint32_t timeout; 80 uint32_t physical_link; 81 }; 82 83 struct sli4_link_diag { 84 uint32_t command; 85 uint32_t timeout; 86 uint32_t test_id; 87 uint32_t loops; 88 uint32_t test_version; 89 uint32_t error_action; 90 }; 91 92 struct diag_mode_test { 93 uint32_t command; 94 }; 95 96 struct diag_status { 97 uint32_t mbox_status; 98 uint32_t shdr_status; 99 uint32_t shdr_add_status; 100 }; 101 102 #define LPFC_WWNN_TYPE 0 103 #define LPFC_WWPN_TYPE 1 104 105 struct get_mgmt_rev { 106 uint32_t command; 107 }; 108 109 #define MANAGEMENT_MAJOR_REV 1 110 #define MANAGEMENT_MINOR_REV 1 111 112 /* the MgmtRevInfo structure */ 113 struct MgmtRevInfo { 114 uint32_t a_Major; 115 uint32_t a_Minor; 116 }; 117 118 struct get_mgmt_rev_reply { 119 struct MgmtRevInfo info; 120 }; 121 122 #define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */ 123 124 /* BSG mailbox request header */ 125 struct dfc_mbox_req { 126 uint32_t command; 127 uint32_t mbOffset; 128 uint32_t inExtWLen; 129 uint32_t outExtWLen; 130 uint32_t extMboxTag; 131 uint32_t extSeqNum; 132 }; 133 134 /* Used for menlo command or menlo data. The xri is only used for menlo data */ 135 struct menlo_command { 136 uint32_t cmd; 137 uint32_t xri; 138 }; 139 140 struct menlo_response { 141 uint32_t xri; /* return the xri of the iocb exchange */ 142 }; 143 144 /* 145 * macros and data structures for handling sli-config mailbox command 146 * pass-through support, this header file is shared between user and 147 * kernel spaces, note the set of macros are duplicates from lpfc_hw4.h, 148 * with macro names prefixed with bsg_, as the macros defined in 149 * lpfc_hw4.h are not accessible from user space. 150 */ 151 152 /* Macros to deal with bit fields. Each bit field must have 3 #defines 153 * associated with it (_SHIFT, _MASK, and _WORD). 154 * EG. For a bit field that is in the 7th bit of the "field4" field of a 155 * structure and is 2 bits in size the following #defines must exist: 156 * struct temp { 157 * uint32_t field1; 158 * uint32_t field2; 159 * uint32_t field3; 160 * uint32_t field4; 161 * #define example_bit_field_SHIFT 7 162 * #define example_bit_field_MASK 0x03 163 * #define example_bit_field_WORD field4 164 * uint32_t field5; 165 * }; 166 * Then the macros below may be used to get or set the value of that field. 167 * EG. To get the value of the bit field from the above example: 168 * struct temp t1; 169 * value = bsg_bf_get(example_bit_field, &t1); 170 * And then to set that bit field: 171 * bsg_bf_set(example_bit_field, &t1, 2); 172 * Or clear that bit field: 173 * bsg_bf_set(example_bit_field, &t1, 0); 174 */ 175 #define bsg_bf_get_le32(name, ptr) \ 176 ((le32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK) 177 #define bsg_bf_get(name, ptr) \ 178 (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK) 179 #define bsg_bf_set_le32(name, ptr, value) \ 180 ((ptr)->name##_WORD = cpu_to_le32(((((value) & \ 181 name##_MASK) << name##_SHIFT) | (le32_to_cpu((ptr)->name##_WORD) & \ 182 ~(name##_MASK << name##_SHIFT))))) 183 #define bsg_bf_set(name, ptr, value) \ 184 ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \ 185 ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT)))) 186 187 /* 188 * The sli_config structure specified here is based on the following 189 * restriction: 190 * 191 * -- SLI_CONFIG EMB=0, carrying MSEs, will carry subcommands without 192 * carrying HBD. 193 * -- SLI_CONFIG EMB=1, not carrying MSE, will carry subcommands with or 194 * without carrying HBDs. 195 */ 196 197 struct lpfc_sli_config_mse { 198 uint32_t pa_lo; 199 uint32_t pa_hi; 200 uint32_t buf_len; 201 #define lpfc_mbox_sli_config_mse_len_SHIFT 0 202 #define lpfc_mbox_sli_config_mse_len_MASK 0xffffff 203 #define lpfc_mbox_sli_config_mse_len_WORD buf_len 204 }; 205 206 struct lpfc_sli_config_hbd { 207 uint32_t buf_len; 208 #define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0 209 #define lpfc_mbox_sli_config_ecmn_hbd_len_MASK 0xffffff 210 #define lpfc_mbox_sli_config_ecmn_hbd_len_WORD buf_len 211 uint32_t pa_lo; 212 uint32_t pa_hi; 213 }; 214 215 struct lpfc_sli_config_hdr { 216 uint32_t word1; 217 #define lpfc_mbox_hdr_emb_SHIFT 0 218 #define lpfc_mbox_hdr_emb_MASK 0x00000001 219 #define lpfc_mbox_hdr_emb_WORD word1 220 #define lpfc_mbox_hdr_mse_cnt_SHIFT 3 221 #define lpfc_mbox_hdr_mse_cnt_MASK 0x0000001f 222 #define lpfc_mbox_hdr_mse_cnt_WORD word1 223 uint32_t payload_length; 224 uint32_t tag_lo; 225 uint32_t tag_hi; 226 uint32_t reserved5; 227 }; 228 229 #define LPFC_CSF_BOOT_DEV 0x1D 230 #define LPFC_CSF_QUERY 0 231 #define LPFC_CSF_SAVE 1 232 233 struct lpfc_sli_config_emb0_subsys { 234 struct lpfc_sli_config_hdr sli_config_hdr; 235 #define LPFC_MBX_SLI_CONFIG_MAX_MSE 19 236 struct lpfc_sli_config_mse mse[LPFC_MBX_SLI_CONFIG_MAX_MSE]; 237 uint32_t padding; 238 uint32_t word64; 239 #define lpfc_emb0_subcmnd_opcode_SHIFT 0 240 #define lpfc_emb0_subcmnd_opcode_MASK 0xff 241 #define lpfc_emb0_subcmnd_opcode_WORD word64 242 #define lpfc_emb0_subcmnd_subsys_SHIFT 8 243 #define lpfc_emb0_subcmnd_subsys_MASK 0xff 244 #define lpfc_emb0_subcmnd_subsys_WORD word64 245 /* Subsystem FCOE (0x0C) OpCodes */ 246 #define SLI_CONFIG_SUBSYS_FCOE 0x0C 247 #define FCOE_OPCODE_READ_FCF 0x08 248 #define FCOE_OPCODE_ADD_FCF 0x09 249 #define FCOE_OPCODE_SET_DPORT_MODE 0x27 250 #define FCOE_OPCODE_GET_DPORT_RESULTS 0x28 251 uint32_t timeout; /* comn_set_feature timeout */ 252 uint32_t request_length; /* comn_set_feature request len */ 253 uint32_t version; /* comn_set_feature version */ 254 uint32_t csf_feature; /* comn_set_feature feature */ 255 uint32_t word69; /* comn_set_feature parameter len */ 256 uint32_t word70; /* comn_set_feature parameter val0 */ 257 #define lpfc_emb0_subcmnd_csf_p0_SHIFT 0 258 #define lpfc_emb0_subcmnd_csf_p0_MASK 0x3 259 #define lpfc_emb0_subcmnd_csf_p0_WORD word70 260 }; 261 262 struct lpfc_sli_config_emb1_subsys { 263 struct lpfc_sli_config_hdr sli_config_hdr; 264 uint32_t word6; 265 #define lpfc_emb1_subcmnd_opcode_SHIFT 0 266 #define lpfc_emb1_subcmnd_opcode_MASK 0xff 267 #define lpfc_emb1_subcmnd_opcode_WORD word6 268 #define lpfc_emb1_subcmnd_subsys_SHIFT 8 269 #define lpfc_emb1_subcmnd_subsys_MASK 0xff 270 #define lpfc_emb1_subcmnd_subsys_WORD word6 271 /* Subsystem COMN (0x01) OpCodes */ 272 #define SLI_CONFIG_SUBSYS_COMN 0x01 273 #define COMN_OPCODE_GET_PROFILE_CONFIG 0xA4 274 #define COMN_OPCODE_READ_OBJECT 0xAB 275 #define COMN_OPCODE_WRITE_OBJECT 0xAC 276 #define COMN_OPCODE_READ_OBJECT_LIST 0xAD 277 #define COMN_OPCODE_DELETE_OBJECT 0xAE 278 #define COMN_OPCODE_SET_FEATURES 0xBF 279 #define COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES 0x79 280 #define COMN_OPCODE_GET_CNTL_ATTRIBUTES 0x20 281 uint32_t timeout; 282 uint32_t request_length; 283 uint32_t word9; 284 #define lpfc_subcmnd_version_SHIFT 0 285 #define lpfc_subcmnd_version_MASK 0xff 286 #define lpfc_subcmnd_version_WORD word9 287 uint32_t word10; 288 #define lpfc_subcmnd_ask_rd_len_SHIFT 0 289 #define lpfc_subcmnd_ask_rd_len_MASK 0xffffff 290 #define lpfc_subcmnd_ask_rd_len_WORD word10 291 uint32_t rd_offset; 292 uint32_t obj_name[26]; 293 uint32_t hbd_count; 294 #define LPFC_MBX_SLI_CONFIG_MAX_HBD 8 295 struct lpfc_sli_config_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD]; 296 }; 297 298 struct lpfc_sli_config_mbox { 299 uint32_t word0; 300 #define lpfc_mqe_status_SHIFT 16 301 #define lpfc_mqe_status_MASK 0x0000FFFF 302 #define lpfc_mqe_status_WORD word0 303 #define lpfc_mqe_command_SHIFT 8 304 #define lpfc_mqe_command_MASK 0x000000FF 305 #define lpfc_mqe_command_WORD word0 306 union { 307 struct lpfc_sli_config_emb0_subsys sli_config_emb0_subsys; 308 struct lpfc_sli_config_emb1_subsys sli_config_emb1_subsys; 309 } un; 310 }; 311 312 #define LPFC_FORCED_LINK_SPEED_NOT_SUPPORTED 0 313 #define LPFC_FORCED_LINK_SPEED_SUPPORTED 1 314 struct get_forced_link_speed_support { 315 uint32_t command; 316 }; 317 struct forced_link_speed_support_reply { 318 uint8_t supported; 319 }; 320 321 struct lpfc_bsg_ras_req { 322 uint32_t command; 323 }; 324 325 struct lpfc_bsg_get_fwlog_req { 326 uint32_t command; 327 uint32_t read_size; 328 uint32_t read_offset; 329 }; 330 331 struct lpfc_bsg_get_ras_lwpd { 332 uint32_t offset; 333 uint32_t wrap_count; 334 }; 335 336 struct lpfc_bsg_set_ras_config_req { 337 uint32_t command; 338 uint8_t action; 339 #define LPFC_RASACTION_STOP_LOGGING 0x00 340 #define LPFC_RASACTION_START_LOGGING 0x01 341 uint8_t log_level; 342 }; 343 344 struct lpfc_bsg_get_ras_config_reply { 345 uint8_t state; 346 #define LPFC_RASLOG_STATE_STOPPED 0x00 347 #define LPFC_RASLOG_STATE_RUNNING 0x01 348 uint8_t log_level; 349 uint32_t log_buff_sz; 350 }; 351 352 struct lpfc_trunk_info { 353 uint32_t word0; 354 #define lpfc_trunk_info_link_status_SHIFT 0 355 #define lpfc_trunk_info_link_status_MASK 1 356 #define lpfc_trunk_info_link_status_WORD word0 357 #define lpfc_trunk_info_trunk_active0_SHIFT 8 358 #define lpfc_trunk_info_trunk_active0_MASK 1 359 #define lpfc_trunk_info_trunk_active0_WORD word0 360 #define lpfc_trunk_info_trunk_active1_SHIFT 9 361 #define lpfc_trunk_info_trunk_active1_MASK 1 362 #define lpfc_trunk_info_trunk_active1_WORD word0 363 #define lpfc_trunk_info_trunk_active2_SHIFT 10 364 #define lpfc_trunk_info_trunk_active2_MASK 1 365 #define lpfc_trunk_info_trunk_active2_WORD word0 366 #define lpfc_trunk_info_trunk_active3_SHIFT 11 367 #define lpfc_trunk_info_trunk_active3_MASK 1 368 #define lpfc_trunk_info_trunk_active3_WORD word0 369 #define lpfc_trunk_info_trunk_config0_SHIFT 12 370 #define lpfc_trunk_info_trunk_config0_MASK 1 371 #define lpfc_trunk_info_trunk_config0_WORD word0 372 #define lpfc_trunk_info_trunk_config1_SHIFT 13 373 #define lpfc_trunk_info_trunk_config1_MASK 1 374 #define lpfc_trunk_info_trunk_config1_WORD word0 375 #define lpfc_trunk_info_trunk_config2_SHIFT 14 376 #define lpfc_trunk_info_trunk_config2_MASK 1 377 #define lpfc_trunk_info_trunk_config2_WORD word0 378 #define lpfc_trunk_info_trunk_config3_SHIFT 15 379 #define lpfc_trunk_info_trunk_config3_MASK 1 380 #define lpfc_trunk_info_trunk_config3_WORD word0 381 uint16_t port_speed; 382 uint16_t logical_speed; 383 uint32_t reserved3; 384 }; 385 386 struct get_trunk_info_req { 387 uint32_t command; 388 }; 389 390 struct get_cgnbuf_info_req { 391 uint32_t command; 392 uint32_t read_size; 393 uint32_t reset; 394 #define LPFC_BSG_CGN_RESET_STAT 1 395 }; 396 397 /* driver only */ 398 #define SLI_CONFIG_NOT_HANDLED 0 399 #define SLI_CONFIG_HANDLED 1 400