1 /******************************************************************* 2 * This file is part of the Emulex Linux Device Driver for * 3 * Fibre Channel Host Bus Adapters. * 4 * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term * 5 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * 6 * Copyright (C) 2010-2015 Emulex. All rights reserved. * 7 * EMULEX and SLI are trademarks of Emulex. * 8 * www.broadcom.com * 9 * * 10 * This program is free software; you can redistribute it and/or * 11 * modify it under the terms of version 2 of the GNU General * 12 * Public License as published by the Free Software Foundation. * 13 * This program is distributed in the hope that it will be useful. * 14 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * 15 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * 16 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * 17 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * 18 * TO BE LEGALLY INVALID. See the GNU General Public License for * 19 * more details, a copy of which can be found in the file COPYING * 20 * included with this package. * 21 *******************************************************************/ 22 /* bsg definitions 23 * No pointers to user data are allowed, all application buffers and sizes will 24 * derived through the bsg interface. 25 * 26 * These are the vendor unique structures passed in using the bsg 27 * FC_BSG_HST_VENDOR message code type. 28 */ 29 #define LPFC_BSG_VENDOR_SET_CT_EVENT 1 30 #define LPFC_BSG_VENDOR_GET_CT_EVENT 2 31 #define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3 32 #define LPFC_BSG_VENDOR_DIAG_MODE 4 33 #define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK 5 34 #define LPFC_BSG_VENDOR_GET_MGMT_REV 6 35 #define LPFC_BSG_VENDOR_MBOX 7 36 #define LPFC_BSG_VENDOR_DIAG_MODE_END 10 37 #define LPFC_BSG_VENDOR_LINK_DIAG_TEST 11 38 #define LPFC_BSG_VENDOR_FORCED_LINK_SPEED 14 39 #define LPFC_BSG_VENDOR_RAS_GET_LWPD 16 40 #define LPFC_BSG_VENDOR_RAS_GET_FWLOG 17 41 #define LPFC_BSG_VENDOR_RAS_GET_CONFIG 18 42 #define LPFC_BSG_VENDOR_RAS_SET_CONFIG 19 43 #define LPFC_BSG_VENDOR_GET_TRUNK_INFO 20 44 #define LPFC_BSG_VENDOR_GET_CGNBUF_INFO 21 45 46 struct set_ct_event { 47 uint32_t command; 48 uint32_t type_mask; 49 uint32_t ev_req_id; 50 uint32_t ev_reg_id; 51 }; 52 53 struct get_ct_event { 54 uint32_t command; 55 uint32_t ev_reg_id; 56 uint32_t ev_req_id; 57 }; 58 59 struct get_ct_event_reply { 60 uint32_t immed_data; 61 uint32_t type; 62 }; 63 64 struct send_mgmt_resp { 65 uint32_t command; 66 uint32_t tag; 67 }; 68 69 70 #define DISABLE_LOOP_BACK 0x0 /* disables loop back */ 71 #define INTERNAL_LOOP_BACK 0x1 /* adapter short cuts the loop internally */ 72 #define EXTERNAL_LOOP_BACK 0x2 /* requires an external loopback plug */ 73 74 struct diag_mode_set { 75 uint32_t command; 76 uint32_t type; 77 uint32_t timeout; 78 uint32_t physical_link; 79 }; 80 81 struct sli4_link_diag { 82 uint32_t command; 83 uint32_t timeout; 84 uint32_t test_id; 85 uint32_t loops; 86 uint32_t test_version; 87 uint32_t error_action; 88 }; 89 90 struct diag_mode_test { 91 uint32_t command; 92 }; 93 94 struct diag_status { 95 uint32_t mbox_status; 96 uint32_t shdr_status; 97 uint32_t shdr_add_status; 98 }; 99 100 #define LPFC_WWNN_TYPE 0 101 #define LPFC_WWPN_TYPE 1 102 103 struct get_mgmt_rev { 104 uint32_t command; 105 }; 106 107 #define MANAGEMENT_MAJOR_REV 1 108 #define MANAGEMENT_MINOR_REV 1 109 110 /* the MgmtRevInfo structure */ 111 struct MgmtRevInfo { 112 uint32_t a_Major; 113 uint32_t a_Minor; 114 }; 115 116 struct get_mgmt_rev_reply { 117 struct MgmtRevInfo info; 118 }; 119 120 #define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */ 121 122 /* BSG mailbox request header */ 123 struct dfc_mbox_req { 124 uint32_t command; 125 uint32_t mbOffset; 126 uint32_t inExtWLen; 127 uint32_t outExtWLen; 128 uint32_t extMboxTag; 129 uint32_t extSeqNum; 130 }; 131 132 /* 133 * macros and data structures for handling sli-config mailbox command 134 * pass-through support, this header file is shared between user and 135 * kernel spaces, note the set of macros are duplicates from lpfc_hw4.h, 136 * with macro names prefixed with bsg_, as the macros defined in 137 * lpfc_hw4.h are not accessible from user space. 138 */ 139 140 /* Macros to deal with bit fields. Each bit field must have 3 #defines 141 * associated with it (_SHIFT, _MASK, and _WORD). 142 * EG. For a bit field that is in the 7th bit of the "field4" field of a 143 * structure and is 2 bits in size the following #defines must exist: 144 * struct temp { 145 * uint32_t field1; 146 * uint32_t field2; 147 * uint32_t field3; 148 * uint32_t field4; 149 * #define example_bit_field_SHIFT 7 150 * #define example_bit_field_MASK 0x03 151 * #define example_bit_field_WORD field4 152 * uint32_t field5; 153 * }; 154 * Then the macros below may be used to get or set the value of that field. 155 * EG. To get the value of the bit field from the above example: 156 * struct temp t1; 157 * value = bsg_bf_get(example_bit_field, &t1); 158 * And then to set that bit field: 159 * bsg_bf_set(example_bit_field, &t1, 2); 160 * Or clear that bit field: 161 * bsg_bf_set(example_bit_field, &t1, 0); 162 */ 163 #define bsg_bf_get_le32(name, ptr) \ 164 ((le32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK) 165 #define bsg_bf_get(name, ptr) \ 166 (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK) 167 #define bsg_bf_set_le32(name, ptr, value) \ 168 ((ptr)->name##_WORD = cpu_to_le32(((((value) & \ 169 name##_MASK) << name##_SHIFT) | (le32_to_cpu((ptr)->name##_WORD) & \ 170 ~(name##_MASK << name##_SHIFT))))) 171 #define bsg_bf_set(name, ptr, value) \ 172 ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \ 173 ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT)))) 174 175 /* 176 * The sli_config structure specified here is based on the following 177 * restriction: 178 * 179 * -- SLI_CONFIG EMB=0, carrying MSEs, will carry subcommands without 180 * carrying HBD. 181 * -- SLI_CONFIG EMB=1, not carrying MSE, will carry subcommands with or 182 * without carrying HBDs. 183 */ 184 185 struct lpfc_sli_config_mse { 186 uint32_t pa_lo; 187 uint32_t pa_hi; 188 uint32_t buf_len; 189 #define lpfc_mbox_sli_config_mse_len_SHIFT 0 190 #define lpfc_mbox_sli_config_mse_len_MASK 0xffffff 191 #define lpfc_mbox_sli_config_mse_len_WORD buf_len 192 }; 193 194 struct lpfc_sli_config_hbd { 195 uint32_t buf_len; 196 #define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0 197 #define lpfc_mbox_sli_config_ecmn_hbd_len_MASK 0xffffff 198 #define lpfc_mbox_sli_config_ecmn_hbd_len_WORD buf_len 199 uint32_t pa_lo; 200 uint32_t pa_hi; 201 }; 202 203 struct lpfc_sli_config_hdr { 204 uint32_t word1; 205 #define lpfc_mbox_hdr_emb_SHIFT 0 206 #define lpfc_mbox_hdr_emb_MASK 0x00000001 207 #define lpfc_mbox_hdr_emb_WORD word1 208 #define lpfc_mbox_hdr_mse_cnt_SHIFT 3 209 #define lpfc_mbox_hdr_mse_cnt_MASK 0x0000001f 210 #define lpfc_mbox_hdr_mse_cnt_WORD word1 211 uint32_t payload_length; 212 uint32_t tag_lo; 213 uint32_t tag_hi; 214 uint32_t reserved5; 215 }; 216 217 #define LPFC_CSF_BOOT_DEV 0x1D 218 #define LPFC_CSF_QUERY 0 219 #define LPFC_CSF_SAVE 1 220 221 struct lpfc_sli_config_emb0_subsys { 222 struct lpfc_sli_config_hdr sli_config_hdr; 223 #define LPFC_MBX_SLI_CONFIG_MAX_MSE 19 224 struct lpfc_sli_config_mse mse[LPFC_MBX_SLI_CONFIG_MAX_MSE]; 225 uint32_t padding; 226 uint32_t word64; 227 #define lpfc_emb0_subcmnd_opcode_SHIFT 0 228 #define lpfc_emb0_subcmnd_opcode_MASK 0xff 229 #define lpfc_emb0_subcmnd_opcode_WORD word64 230 #define lpfc_emb0_subcmnd_subsys_SHIFT 8 231 #define lpfc_emb0_subcmnd_subsys_MASK 0xff 232 #define lpfc_emb0_subcmnd_subsys_WORD word64 233 /* Subsystem FCOE (0x0C) OpCodes */ 234 #define SLI_CONFIG_SUBSYS_FCOE 0x0C 235 #define FCOE_OPCODE_READ_FCF 0x08 236 #define FCOE_OPCODE_ADD_FCF 0x09 237 #define FCOE_OPCODE_SET_DPORT_MODE 0x27 238 #define FCOE_OPCODE_GET_DPORT_RESULTS 0x28 239 uint32_t timeout; /* comn_set_feature timeout */ 240 uint32_t request_length; /* comn_set_feature request len */ 241 uint32_t version; /* comn_set_feature version */ 242 uint32_t csf_feature; /* comn_set_feature feature */ 243 uint32_t word69; /* comn_set_feature parameter len */ 244 uint32_t word70; /* comn_set_feature parameter val0 */ 245 #define lpfc_emb0_subcmnd_csf_p0_SHIFT 0 246 #define lpfc_emb0_subcmnd_csf_p0_MASK 0x3 247 #define lpfc_emb0_subcmnd_csf_p0_WORD word70 248 }; 249 250 struct lpfc_sli_config_emb1_subsys { 251 struct lpfc_sli_config_hdr sli_config_hdr; 252 uint32_t word6; 253 #define lpfc_emb1_subcmnd_opcode_SHIFT 0 254 #define lpfc_emb1_subcmnd_opcode_MASK 0xff 255 #define lpfc_emb1_subcmnd_opcode_WORD word6 256 #define lpfc_emb1_subcmnd_subsys_SHIFT 8 257 #define lpfc_emb1_subcmnd_subsys_MASK 0xff 258 #define lpfc_emb1_subcmnd_subsys_WORD word6 259 /* Subsystem COMN (0x01) OpCodes */ 260 #define SLI_CONFIG_SUBSYS_COMN 0x01 261 #define COMN_OPCODE_GET_PROFILE_CONFIG 0xA4 262 #define COMN_OPCODE_READ_OBJECT 0xAB 263 #define COMN_OPCODE_WRITE_OBJECT 0xAC 264 #define COMN_OPCODE_READ_OBJECT_LIST 0xAD 265 #define COMN_OPCODE_DELETE_OBJECT 0xAE 266 #define COMN_OPCODE_SET_FEATURES 0xBF 267 #define COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES 0x79 268 #define COMN_OPCODE_GET_CNTL_ATTRIBUTES 0x20 269 uint32_t timeout; 270 uint32_t request_length; 271 uint32_t word9; 272 #define lpfc_subcmnd_version_SHIFT 0 273 #define lpfc_subcmnd_version_MASK 0xff 274 #define lpfc_subcmnd_version_WORD word9 275 uint32_t word10; 276 #define lpfc_subcmnd_ask_rd_len_SHIFT 0 277 #define lpfc_subcmnd_ask_rd_len_MASK 0xffffff 278 #define lpfc_subcmnd_ask_rd_len_WORD word10 279 uint32_t rd_offset; 280 uint32_t obj_name[26]; 281 uint32_t hbd_count; 282 #define LPFC_MBX_SLI_CONFIG_MAX_HBD 8 283 struct lpfc_sli_config_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD]; 284 }; 285 286 struct lpfc_sli_config_mbox { 287 uint32_t word0; 288 #define lpfc_mqe_status_SHIFT 16 289 #define lpfc_mqe_status_MASK 0x0000FFFF 290 #define lpfc_mqe_status_WORD word0 291 #define lpfc_mqe_command_SHIFT 8 292 #define lpfc_mqe_command_MASK 0x000000FF 293 #define lpfc_mqe_command_WORD word0 294 union { 295 struct lpfc_sli_config_emb0_subsys sli_config_emb0_subsys; 296 struct lpfc_sli_config_emb1_subsys sli_config_emb1_subsys; 297 } un; 298 }; 299 300 #define LPFC_FORCED_LINK_SPEED_NOT_SUPPORTED 0 301 #define LPFC_FORCED_LINK_SPEED_SUPPORTED 1 302 struct get_forced_link_speed_support { 303 uint32_t command; 304 }; 305 struct forced_link_speed_support_reply { 306 uint8_t supported; 307 }; 308 309 struct lpfc_bsg_ras_req { 310 uint32_t command; 311 }; 312 313 struct lpfc_bsg_get_fwlog_req { 314 uint32_t command; 315 uint32_t read_size; 316 uint32_t read_offset; 317 }; 318 319 struct lpfc_bsg_get_ras_lwpd { 320 uint32_t offset; 321 uint32_t wrap_count; 322 }; 323 324 struct lpfc_bsg_set_ras_config_req { 325 uint32_t command; 326 uint8_t action; 327 #define LPFC_RASACTION_STOP_LOGGING 0x00 328 #define LPFC_RASACTION_START_LOGGING 0x01 329 uint8_t log_level; 330 }; 331 332 struct lpfc_bsg_get_ras_config_reply { 333 uint8_t state; 334 #define LPFC_RASLOG_STATE_STOPPED 0x00 335 #define LPFC_RASLOG_STATE_RUNNING 0x01 336 uint8_t log_level; 337 uint32_t log_buff_sz; 338 }; 339 340 struct lpfc_trunk_info { 341 uint32_t word0; 342 #define lpfc_trunk_info_link_status_SHIFT 0 343 #define lpfc_trunk_info_link_status_MASK 1 344 #define lpfc_trunk_info_link_status_WORD word0 345 #define lpfc_trunk_info_trunk_active0_SHIFT 8 346 #define lpfc_trunk_info_trunk_active0_MASK 1 347 #define lpfc_trunk_info_trunk_active0_WORD word0 348 #define lpfc_trunk_info_trunk_active1_SHIFT 9 349 #define lpfc_trunk_info_trunk_active1_MASK 1 350 #define lpfc_trunk_info_trunk_active1_WORD word0 351 #define lpfc_trunk_info_trunk_active2_SHIFT 10 352 #define lpfc_trunk_info_trunk_active2_MASK 1 353 #define lpfc_trunk_info_trunk_active2_WORD word0 354 #define lpfc_trunk_info_trunk_active3_SHIFT 11 355 #define lpfc_trunk_info_trunk_active3_MASK 1 356 #define lpfc_trunk_info_trunk_active3_WORD word0 357 #define lpfc_trunk_info_trunk_config0_SHIFT 12 358 #define lpfc_trunk_info_trunk_config0_MASK 1 359 #define lpfc_trunk_info_trunk_config0_WORD word0 360 #define lpfc_trunk_info_trunk_config1_SHIFT 13 361 #define lpfc_trunk_info_trunk_config1_MASK 1 362 #define lpfc_trunk_info_trunk_config1_WORD word0 363 #define lpfc_trunk_info_trunk_config2_SHIFT 14 364 #define lpfc_trunk_info_trunk_config2_MASK 1 365 #define lpfc_trunk_info_trunk_config2_WORD word0 366 #define lpfc_trunk_info_trunk_config3_SHIFT 15 367 #define lpfc_trunk_info_trunk_config3_MASK 1 368 #define lpfc_trunk_info_trunk_config3_WORD word0 369 uint16_t port_speed; 370 uint16_t logical_speed; 371 uint32_t reserved3; 372 }; 373 374 struct get_trunk_info_req { 375 uint32_t command; 376 }; 377 378 struct get_cgnbuf_info_req { 379 uint32_t command; 380 uint32_t read_size; 381 uint32_t reset; 382 #define LPFC_BSG_CGN_RESET_STAT 1 383 }; 384 385 /* driver only */ 386 #define SLI_CONFIG_NOT_HANDLED 0 387 #define SLI_CONFIG_HANDLED 1 388