xref: /openbmc/linux/drivers/scsi/lpfc/lpfc.h (revision 56edb6c2)
1 /*******************************************************************
2  * This file is part of the Emulex Linux Device Driver for         *
3  * Fibre Channel Host Bus Adapters.                                *
4  * Copyright (C) 2017-2021 Broadcom. All Rights Reserved. The term *
5  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
6  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
7  * EMULEX and SLI are trademarks of Emulex.                        *
8  * www.broadcom.com                                                *
9  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
10  *                                                                 *
11  * This program is free software; you can redistribute it and/or   *
12  * modify it under the terms of version 2 of the GNU General       *
13  * Public License as published by the Free Software Foundation.    *
14  * This program is distributed in the hope that it will be useful. *
15  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
16  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
17  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
18  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
19  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
20  * more details, a copy of which can be found in the file COPYING  *
21  * included with this package.                                     *
22  *******************************************************************/
23 
24 #include <scsi/scsi_host.h>
25 #include <linux/hashtable.h>
26 #include <linux/ktime.h>
27 #include <linux/workqueue.h>
28 
29 #if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_SCSI_LPFC_DEBUG_FS)
30 #define CONFIG_SCSI_LPFC_DEBUG_FS
31 #endif
32 
33 struct lpfc_sli2_slim;
34 
35 #define ELX_MODEL_NAME_SIZE	80
36 
37 #define LPFC_PCI_DEV_LP		0x1
38 #define LPFC_PCI_DEV_OC		0x2
39 
40 #define LPFC_SLI_REV2		2
41 #define LPFC_SLI_REV3		3
42 #define LPFC_SLI_REV4		4
43 
44 #define LPFC_MAX_TARGET		4096	/* max number of targets supported */
45 #define LPFC_MAX_DISC_THREADS	64	/* max outstanding discovery els
46 					   requests */
47 #define LPFC_MAX_NS_RETRY	3	/* Number of retry attempts to contact
48 					   the NameServer  before giving up. */
49 #define LPFC_CMD_PER_LUN	3	/* max outstanding cmds per lun */
50 #define LPFC_DEFAULT_SG_SEG_CNT 64	/* sg element count per scsi cmnd */
51 #define LPFC_DEFAULT_MENLO_SG_SEG_CNT 128	/* sg element count per scsi
52 		cmnd for menlo needs nearly twice as for firmware
53 		downloads using bsg */
54 
55 #define LPFC_DEFAULT_XPSGL_SIZE	256
56 #define LPFC_MAX_SG_TABLESIZE	0xffff
57 #define LPFC_MIN_SG_SLI4_BUF_SZ	0x800	/* based on LPFC_DEFAULT_SG_SEG_CNT */
58 #define LPFC_MAX_BG_SLI4_SEG_CNT_DIF 128 /* sg element count for BlockGuard */
59 #define LPFC_MAX_SG_SEG_CNT_DIF 512	/* sg element count per scsi cmnd  */
60 #define LPFC_MAX_SG_SEG_CNT	4096	/* sg element count per scsi cmnd */
61 #define LPFC_MIN_SG_SEG_CNT	32	/* sg element count per scsi cmnd */
62 #define LPFC_MAX_SGL_SEG_CNT	512	/* SGL element count per scsi cmnd */
63 #define LPFC_MAX_BPL_SEG_CNT	4096	/* BPL element count per scsi cmnd */
64 #define LPFC_MAX_NVME_SEG_CNT	256	/* max SGL element cnt per NVME cmnd */
65 
66 #define LPFC_MAX_SGE_SIZE       0x80000000 /* Maximum data allowed in a SGE */
67 #define LPFC_IOCB_LIST_CNT	2250	/* list of IOCBs for fast-path usage. */
68 #define LPFC_Q_RAMP_UP_INTERVAL 120     /* lun q_depth ramp up interval */
69 #define LPFC_VNAME_LEN		100	/* vport symbolic name length */
70 #define LPFC_TGTQ_RAMPUP_PCENT	5	/* Target queue rampup in percentage */
71 #define LPFC_MIN_TGT_QDEPTH	10
72 #define LPFC_MAX_TGT_QDEPTH	0xFFFF
73 
74 #define  LPFC_MAX_BUCKET_COUNT 20	/* Maximum no. of buckets for stat data
75 					   collection. */
76 /*
77  * Following time intervals are used of adjusting SCSI device
78  * queue depths when there are driver resource error or Firmware
79  * resource error.
80  */
81 /* 1 Second */
82 #define QUEUE_RAMP_DOWN_INTERVAL	(msecs_to_jiffies(1000 * 1))
83 
84 /* Number of exchanges reserved for discovery to complete */
85 #define LPFC_DISC_IOCB_BUFF_COUNT 20
86 
87 #define LPFC_HB_MBOX_INTERVAL   5	/* Heart beat interval in seconds. */
88 #define LPFC_HB_MBOX_TIMEOUT    30	/* Heart beat timeout  in seconds. */
89 
90 /* Error Attention event polling interval */
91 #define LPFC_ERATT_POLL_INTERVAL	5 /* EATT poll interval in seconds */
92 
93 /* Define macros for 64 bit support */
94 #define putPaddrLow(addr)    ((uint32_t) (0xffffffff & (u64)(addr)))
95 #define putPaddrHigh(addr)   ((uint32_t) (0xffffffff & (((u64)(addr))>>32)))
96 #define getPaddr(high, low)  ((dma_addr_t)( \
97 			     (( (u64)(high)<<16 ) << 16)|( (u64)(low))))
98 /* Provide maximum configuration definitions. */
99 #define LPFC_DRVR_TIMEOUT	16	/* driver iocb timeout value in sec */
100 #define FC_MAX_ADPTMSG		64
101 
102 #define MAX_HBAEVT	32
103 #define MAX_HBAS_NO_RESET 16
104 
105 /* Number of MSI-X vectors the driver uses */
106 #define LPFC_MSIX_VECTORS	2
107 
108 /* lpfc wait event data ready flag */
109 #define LPFC_DATA_READY		0	/* bit 0 */
110 
111 /* queue dump line buffer size */
112 #define LPFC_LBUF_SZ		128
113 
114 /* mailbox system shutdown options */
115 #define LPFC_MBX_NO_WAIT	0
116 #define LPFC_MBX_WAIT		1
117 
118 #define LPFC_CFG_PARAM_MAGIC_NUM 0xFEAA0005
119 #define LPFC_PORT_CFG_NAME "/cfg/port.cfg"
120 
121 #define lpfc_rangecheck(val, min, max) \
122 	((uint)(val) >= (uint)(min) && (val) <= (max))
123 
124 enum lpfc_polling_flags {
125 	ENABLE_FCP_RING_POLLING = 0x1,
126 	DISABLE_FCP_RING_INT    = 0x2
127 };
128 
129 struct perf_prof {
130 	uint16_t cmd_cpu[40];
131 	uint16_t rsp_cpu[40];
132 	uint16_t qh_cpu[40];
133 	uint16_t wqidx[40];
134 };
135 
136 /*
137  * Provide for FC4 TYPE x28 - NVME.  The
138  * bit mask for FCP and NVME is 0x8 identically
139  * because they are 32 bit positions distance.
140  */
141 #define LPFC_FC4_TYPE_BITMASK	0x00000100
142 
143 /* Provide DMA memory definitions the driver uses per port instance. */
144 struct lpfc_dmabuf {
145 	struct list_head list;
146 	void *virt;		/* virtual address ptr */
147 	dma_addr_t phys;	/* mapped address */
148 	uint32_t   buffer_tag;	/* used for tagged queue ring */
149 };
150 
151 struct lpfc_nvmet_ctxbuf {
152 	struct list_head list;
153 	struct lpfc_async_xchg_ctx *context;
154 	struct lpfc_iocbq *iocbq;
155 	struct lpfc_sglq *sglq;
156 	struct work_struct defer_work;
157 };
158 
159 struct lpfc_dma_pool {
160 	struct lpfc_dmabuf   *elements;
161 	uint32_t    max_count;
162 	uint32_t    current_count;
163 };
164 
165 struct hbq_dmabuf {
166 	struct lpfc_dmabuf hbuf;
167 	struct lpfc_dmabuf dbuf;
168 	uint16_t total_size;
169 	uint16_t bytes_recv;
170 	uint32_t tag;
171 	struct lpfc_cq_event cq_event;
172 	unsigned long time_stamp;
173 	void *context;
174 };
175 
176 struct rqb_dmabuf {
177 	struct lpfc_dmabuf hbuf;
178 	struct lpfc_dmabuf dbuf;
179 	uint16_t total_size;
180 	uint16_t bytes_recv;
181 	uint16_t idx;
182 	struct lpfc_queue *hrq;	  /* ptr to associated Header RQ */
183 	struct lpfc_queue *drq;	  /* ptr to associated Data RQ */
184 };
185 
186 /* Priority bit.  Set value to exceed low water mark in lpfc_mem. */
187 #define MEM_PRI		0x100
188 
189 
190 /****************************************************************************/
191 /*      Device VPD save area                                                */
192 /****************************************************************************/
193 typedef struct lpfc_vpd {
194 	uint32_t status;	/* vpd status value */
195 	uint32_t length;	/* number of bytes actually returned */
196 	struct {
197 		uint32_t rsvd1;	/* Revision numbers */
198 		uint32_t biuRev;
199 		uint32_t smRev;
200 		uint32_t smFwRev;
201 		uint32_t endecRev;
202 		uint16_t rBit;
203 		uint8_t fcphHigh;
204 		uint8_t fcphLow;
205 		uint8_t feaLevelHigh;
206 		uint8_t feaLevelLow;
207 		uint32_t postKernRev;
208 		uint32_t opFwRev;
209 		uint8_t opFwName[16];
210 		uint32_t sli1FwRev;
211 		uint8_t sli1FwName[16];
212 		uint32_t sli2FwRev;
213 		uint8_t sli2FwName[16];
214 	} rev;
215 	struct {
216 #ifdef __BIG_ENDIAN_BITFIELD
217 		uint32_t rsvd3  :20;  /* Reserved                             */
218 		uint32_t rsvd2	: 3;  /* Reserved                             */
219 		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
220 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
221 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
222 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
223 		uint32_t chbs   : 1;  /* Cofigure Host Backing store          */
224 		uint32_t cinb   : 1;  /* Enable Interrupt Notification Block  */
225 		uint32_t cerbm	: 1;  /* Configure Enhanced Receive Buf Mgmt  */
226 		uint32_t cmx	: 1;  /* Configure Max XRIs                   */
227 		uint32_t cmr	: 1;  /* Configure Max RPIs                   */
228 #else	/*  __LITTLE_ENDIAN */
229 		uint32_t cmr	: 1;  /* Configure Max RPIs                   */
230 		uint32_t cmx	: 1;  /* Configure Max XRIs                   */
231 		uint32_t cerbm	: 1;  /* Configure Enhanced Receive Buf Mgmt  */
232 		uint32_t cinb   : 1;  /* Enable Interrupt Notification Block  */
233 		uint32_t chbs   : 1;  /* Cofigure Host Backing store          */
234 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
235 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
236 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
237 		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
238 		uint32_t rsvd2	: 3;  /* Reserved                             */
239 		uint32_t rsvd3  :20;  /* Reserved                             */
240 #endif
241 	} sli3Feat;
242 } lpfc_vpd_t;
243 
244 
245 /*
246  * lpfc stat counters
247  */
248 struct lpfc_stats {
249 	/* Statistics for ELS commands */
250 	uint32_t elsLogiCol;
251 	uint32_t elsRetryExceeded;
252 	uint32_t elsXmitRetry;
253 	uint32_t elsDelayRetry;
254 	uint32_t elsRcvDrop;
255 	uint32_t elsRcvFrame;
256 	uint32_t elsRcvRSCN;
257 	uint32_t elsRcvRNID;
258 	uint32_t elsRcvFARP;
259 	uint32_t elsRcvFARPR;
260 	uint32_t elsRcvFLOGI;
261 	uint32_t elsRcvPLOGI;
262 	uint32_t elsRcvADISC;
263 	uint32_t elsRcvPDISC;
264 	uint32_t elsRcvFAN;
265 	uint32_t elsRcvLOGO;
266 	uint32_t elsRcvPRLO;
267 	uint32_t elsRcvPRLI;
268 	uint32_t elsRcvLIRR;
269 	uint32_t elsRcvRLS;
270 	uint32_t elsRcvRPL;
271 	uint32_t elsRcvRRQ;
272 	uint32_t elsRcvRTV;
273 	uint32_t elsRcvECHO;
274 	uint32_t elsRcvLCB;
275 	uint32_t elsRcvRDP;
276 	uint32_t elsRcvRDF;
277 	uint32_t elsXmitFLOGI;
278 	uint32_t elsXmitFDISC;
279 	uint32_t elsXmitPLOGI;
280 	uint32_t elsXmitPRLI;
281 	uint32_t elsXmitADISC;
282 	uint32_t elsXmitLOGO;
283 	uint32_t elsXmitSCR;
284 	uint32_t elsXmitRSCN;
285 	uint32_t elsXmitRNID;
286 	uint32_t elsXmitFARP;
287 	uint32_t elsXmitFARPR;
288 	uint32_t elsXmitACC;
289 	uint32_t elsXmitLSRJT;
290 
291 	uint32_t frameRcvBcast;
292 	uint32_t frameRcvMulti;
293 	uint32_t strayXmitCmpl;
294 	uint32_t frameXmitDelay;
295 	uint32_t xriCmdCmpl;
296 	uint32_t xriStatErr;
297 	uint32_t LinkUp;
298 	uint32_t LinkDown;
299 	uint32_t LinkMultiEvent;
300 	uint32_t NoRcvBuf;
301 	uint32_t fcpCmd;
302 	uint32_t fcpCmpl;
303 	uint32_t fcpRspErr;
304 	uint32_t fcpRemoteStop;
305 	uint32_t fcpPortRjt;
306 	uint32_t fcpPortBusy;
307 	uint32_t fcpError;
308 	uint32_t fcpLocalErr;
309 };
310 
311 struct lpfc_hba;
312 
313 
314 #define LPFC_VMID_TIMER   300	/* timer interval in seconds */
315 
316 #define LPFC_MAX_VMID_SIZE      256
317 #define LPFC_COMPRESS_VMID_SIZE 16
318 
319 union lpfc_vmid_io_tag {
320 	u32 app_id;	/* App Id vmid */
321 	u8 cs_ctl_vmid;	/* Priority tag vmid */
322 };
323 
324 #define JIFFIES_PER_HR	(HZ * 60 * 60)
325 
326 struct lpfc_vmid {
327 	u8 flag;
328 #define LPFC_VMID_SLOT_FREE     0x0
329 #define LPFC_VMID_SLOT_USED     0x1
330 #define LPFC_VMID_REQ_REGISTER  0x2
331 #define LPFC_VMID_REGISTERED    0x4
332 #define LPFC_VMID_DE_REGISTER   0x8
333 	char host_vmid[LPFC_MAX_VMID_SIZE];
334 	union lpfc_vmid_io_tag un;
335 	struct hlist_node hnode;
336 	u64 io_rd_cnt;
337 	u64 io_wr_cnt;
338 	u8 vmid_len;
339 	u8 delete_inactive; /* Delete if inactive flag 0 = no, 1 = yes */
340 	u32 hash_index;
341 	u64 __percpu *last_io_time;
342 };
343 
344 #define lpfc_vmid_is_type_priority_tag(vport)\
345 	(vport->vmid_priority_tagging ? 1 : 0)
346 
347 #define LPFC_VMID_HASH_SIZE     256
348 #define LPFC_VMID_HASH_MASK     255
349 #define LPFC_VMID_HASH_SHIFT    6
350 
351 struct lpfc_vmid_context {
352 	struct lpfc_vmid *vmp;
353 	struct lpfc_nodelist *nlp;
354 	bool instantiated;
355 };
356 
357 struct lpfc_vmid_priority_range {
358 	u8 low;
359 	u8 high;
360 	u8 qos;
361 };
362 
363 struct lpfc_vmid_priority_info {
364 	u32 num_descriptors;
365 	struct lpfc_vmid_priority_range *vmid_range;
366 };
367 
368 #define QFPA_EVEN_ONLY 0x01
369 #define QFPA_ODD_ONLY  0x02
370 #define QFPA_EVEN_ODD  0x03
371 
372 enum discovery_state {
373 	LPFC_VPORT_UNKNOWN     =  0,    /* vport state is unknown */
374 	LPFC_VPORT_FAILED      =  1,    /* vport has failed */
375 	LPFC_LOCAL_CFG_LINK    =  6,    /* local NPORT Id configured */
376 	LPFC_FLOGI             =  7,    /* FLOGI sent to Fabric */
377 	LPFC_FDISC             =  8,    /* FDISC sent for vport */
378 	LPFC_FABRIC_CFG_LINK   =  9,    /* Fabric assigned NPORT Id
379 				         * configured */
380 	LPFC_NS_REG            =  10,   /* Register with NameServer */
381 	LPFC_NS_QRY            =  11,   /* Query NameServer for NPort ID list */
382 	LPFC_BUILD_DISC_LIST   =  12,   /* Build ADISC and PLOGI lists for
383 				         * device authentication / discovery */
384 	LPFC_DISC_AUTH         =  13,   /* Processing ADISC list */
385 	LPFC_VPORT_READY       =  32,
386 };
387 
388 enum hba_state {
389 	LPFC_LINK_UNKNOWN    =   0,   /* HBA state is unknown */
390 	LPFC_WARM_START      =   1,   /* HBA state after selective reset */
391 	LPFC_INIT_START      =   2,   /* Initial state after board reset */
392 	LPFC_INIT_MBX_CMDS   =   3,   /* Initialize HBA with mbox commands */
393 	LPFC_LINK_DOWN       =   4,   /* HBA initialized, link is down */
394 	LPFC_LINK_UP         =   5,   /* Link is up  - issue READ_LA */
395 	LPFC_CLEAR_LA        =   6,   /* authentication cmplt - issue
396 				       * CLEAR_LA */
397 	LPFC_HBA_READY       =  32,
398 	LPFC_HBA_ERROR       =  -1
399 };
400 
401 struct lpfc_trunk_link_state {
402 	enum hba_state state;
403 	uint8_t fault;
404 };
405 
406 struct lpfc_trunk_link  {
407 	struct lpfc_trunk_link_state link0,
408 				     link1,
409 				     link2,
410 				     link3;
411 };
412 
413 /* Format of congestion module parameters */
414 struct lpfc_cgn_param {
415 	uint32_t cgn_param_magic;
416 	uint8_t  cgn_param_version;	/* version 1 */
417 	uint8_t  cgn_param_mode;	/* 0=off 1=managed 2=monitor only */
418 #define LPFC_CFG_OFF		0
419 #define LPFC_CFG_MANAGED	1
420 #define LPFC_CFG_MONITOR	2
421 	uint8_t  cgn_rsvd1;
422 	uint8_t  cgn_rsvd2;
423 	uint8_t  cgn_param_level0;
424 	uint8_t  cgn_param_level1;
425 	uint8_t  cgn_param_level2;
426 	uint8_t  byte11;
427 	uint8_t  byte12;
428 	uint8_t  byte13;
429 	uint8_t  byte14;
430 	uint8_t  byte15;
431 };
432 
433 /* Max number of days of congestion data */
434 #define LPFC_MAX_CGN_DAYS 10
435 
436 /* Format of congestion buffer info
437  * This structure defines memory thats allocated and registered with
438  * the HBA firmware. When adding or removing fields from this structure
439  * the alignment must match the HBA firmware.
440  */
441 
442 struct lpfc_cgn_info {
443 	/* Header */
444 	__le16   cgn_info_size;		/* is sizeof(struct lpfc_cgn_info) */
445 	uint8_t  cgn_info_version;	/* represents format of structure */
446 #define LPFC_CGN_INFO_V1	1
447 #define LPFC_CGN_INFO_V2	2
448 #define LPFC_CGN_INFO_V3	3
449 	uint8_t  cgn_info_mode;		/* 0=off 1=managed 2=monitor only */
450 	uint8_t  cgn_info_detect;
451 	uint8_t  cgn_info_action;
452 	uint8_t  cgn_info_level0;
453 	uint8_t  cgn_info_level1;
454 	uint8_t  cgn_info_level2;
455 
456 	/* Start Time */
457 	uint8_t  cgn_info_month;
458 	uint8_t  cgn_info_day;
459 	uint8_t  cgn_info_year;
460 	uint8_t  cgn_info_hour;
461 	uint8_t  cgn_info_minute;
462 	uint8_t  cgn_info_second;
463 
464 	/* minute / hours / daily indices */
465 	uint8_t  cgn_index_minute;
466 	uint8_t  cgn_index_hour;
467 	uint8_t  cgn_index_day;
468 
469 	__le16   cgn_warn_freq;
470 	__le16   cgn_alarm_freq;
471 	__le16   cgn_lunq;
472 	uint8_t  cgn_pad1[8];
473 
474 	/* Driver Information */
475 	__le16   cgn_drvr_min[60];
476 	__le32   cgn_drvr_hr[24];
477 	__le32   cgn_drvr_day[LPFC_MAX_CGN_DAYS];
478 
479 	/* Congestion Warnings */
480 	__le16   cgn_warn_min[60];
481 	__le32   cgn_warn_hr[24];
482 	__le32   cgn_warn_day[LPFC_MAX_CGN_DAYS];
483 
484 	/* Latency Information */
485 	__le32   cgn_latency_min[60];
486 	__le32   cgn_latency_hr[24];
487 	__le32   cgn_latency_day[LPFC_MAX_CGN_DAYS];
488 
489 	/* Bandwidth Information */
490 	__le16   cgn_bw_min[60];
491 	__le16   cgn_bw_hr[24];
492 	__le16   cgn_bw_day[LPFC_MAX_CGN_DAYS];
493 
494 	/* Congestion Alarms */
495 	__le16   cgn_alarm_min[60];
496 	__le32   cgn_alarm_hr[24];
497 	__le32   cgn_alarm_day[LPFC_MAX_CGN_DAYS];
498 
499 	struct_group(cgn_stat,
500 		uint8_t  cgn_stat_npm;		/* Notifications per minute */
501 
502 		/* Start Time */
503 		uint8_t  cgn_stat_month;
504 		uint8_t  cgn_stat_day;
505 		uint8_t  cgn_stat_year;
506 		uint8_t  cgn_stat_hour;
507 		uint8_t  cgn_stat_minute;
508 		uint8_t  cgn_pad2[2];
509 
510 		__le32   cgn_notification;
511 		__le32   cgn_peer_notification;
512 		__le32   link_integ_notification;
513 		__le32   delivery_notification;
514 
515 		uint8_t  cgn_stat_cgn_month; /* Last congestion notification FPIN */
516 		uint8_t  cgn_stat_cgn_day;
517 		uint8_t  cgn_stat_cgn_year;
518 		uint8_t  cgn_stat_cgn_hour;
519 		uint8_t  cgn_stat_cgn_min;
520 		uint8_t  cgn_stat_cgn_sec;
521 
522 		uint8_t  cgn_stat_peer_month; /* Last peer congestion FPIN */
523 		uint8_t  cgn_stat_peer_day;
524 		uint8_t  cgn_stat_peer_year;
525 		uint8_t  cgn_stat_peer_hour;
526 		uint8_t  cgn_stat_peer_min;
527 		uint8_t  cgn_stat_peer_sec;
528 
529 		uint8_t  cgn_stat_lnk_month; /* Last link integrity FPIN */
530 		uint8_t  cgn_stat_lnk_day;
531 		uint8_t  cgn_stat_lnk_year;
532 		uint8_t  cgn_stat_lnk_hour;
533 		uint8_t  cgn_stat_lnk_min;
534 		uint8_t  cgn_stat_lnk_sec;
535 
536 		uint8_t  cgn_stat_del_month; /* Last delivery notification FPIN */
537 		uint8_t  cgn_stat_del_day;
538 		uint8_t  cgn_stat_del_year;
539 		uint8_t  cgn_stat_del_hour;
540 		uint8_t  cgn_stat_del_min;
541 		uint8_t  cgn_stat_del_sec;
542 	);
543 
544 	__le32   cgn_info_crc;
545 #define LPFC_CGN_CRC32_MAGIC_NUMBER	0x1EDC6F41
546 #define LPFC_CGN_CRC32_SEED		0xFFFFFFFF
547 };
548 
549 #define LPFC_CGN_INFO_SZ	(sizeof(struct lpfc_cgn_info) -  \
550 				sizeof(uint32_t))
551 
552 struct lpfc_cgn_stat {
553 	atomic64_t total_bytes;
554 	atomic64_t rcv_bytes;
555 	atomic64_t rx_latency;
556 #define LPFC_CGN_NOT_SENT	0xFFFFFFFFFFFFFFFFLL
557 	atomic_t rx_io_cnt;
558 };
559 
560 struct lpfc_cgn_acqe_stat {
561 	atomic64_t alarm;
562 	atomic64_t warn;
563 };
564 
565 struct lpfc_vport {
566 	struct lpfc_hba *phba;
567 	struct list_head listentry;
568 	uint8_t port_type;
569 #define LPFC_PHYSICAL_PORT 1
570 #define LPFC_NPIV_PORT  2
571 #define LPFC_FABRIC_PORT 3
572 	enum discovery_state port_state;
573 
574 	uint16_t vpi;
575 	uint16_t vfi;
576 	uint8_t vpi_state;
577 #define LPFC_VPI_REGISTERED	0x1
578 
579 	uint32_t fc_flag;	/* FC flags */
580 /* Several of these flags are HBA centric and should be moved to
581  * phba->link_flag (e.g. FC_PTP, FC_PUBLIC_LOOP)
582  */
583 #define FC_PT2PT                0x1	 /* pt2pt with no fabric */
584 #define FC_PT2PT_PLOGI          0x2	 /* pt2pt initiate PLOGI */
585 #define FC_DISC_TMO             0x4	 /* Discovery timer running */
586 #define FC_PUBLIC_LOOP          0x8	 /* Public loop */
587 #define FC_LBIT                 0x10	 /* LOGIN bit in loopinit set */
588 #define FC_RSCN_MODE            0x20	 /* RSCN cmd rcv'ed */
589 #define FC_NLP_MORE             0x40	 /* More node to process in node tbl */
590 #define FC_OFFLINE_MODE         0x80	 /* Interface is offline for diag */
591 #define FC_FABRIC               0x100	 /* We are fabric attached */
592 #define FC_VPORT_LOGO_RCVD      0x200    /* LOGO received on vport */
593 #define FC_RSCN_DISCOVERY       0x400	 /* Auth all devices after RSCN */
594 #define FC_LOGO_RCVD_DID_CHNG   0x800    /* FDISC on phys port detect DID chng*/
595 #define FC_PT2PT_NO_NVME        0x1000   /* Don't send NVME PRLI */
596 #define FC_SCSI_SCAN_TMO        0x4000	 /* scsi scan timer running */
597 #define FC_ABORT_DISCOVERY      0x8000	 /* we want to abort discovery */
598 #define FC_NDISC_ACTIVE         0x10000	 /* NPort discovery active */
599 #define FC_BYPASSED_MODE        0x20000	 /* NPort is in bypassed mode */
600 #define FC_VPORT_NEEDS_REG_VPI	0x80000  /* Needs to have its vpi registered */
601 #define FC_RSCN_DEFERRED	0x100000 /* A deferred RSCN being processed */
602 #define FC_VPORT_NEEDS_INIT_VPI 0x200000 /* Need to INIT_VPI before FDISC */
603 #define FC_VPORT_CVL_RCVD	0x400000 /* VLink failed due to CVL	 */
604 #define FC_VFI_REGISTERED	0x800000 /* VFI is registered */
605 #define FC_FDISC_COMPLETED	0x1000000/* FDISC completed */
606 #define FC_DISC_DELAYED		0x2000000/* Delay NPort discovery */
607 
608 	uint32_t ct_flags;
609 #define FC_CT_RFF_ID		0x1	 /* RFF_ID accepted by switch */
610 #define FC_CT_RNN_ID		0x2	 /* RNN_ID accepted by switch */
611 #define FC_CT_RSNN_NN		0x4	 /* RSNN_NN accepted by switch */
612 #define FC_CT_RSPN_ID		0x8	 /* RSPN_ID accepted by switch */
613 #define FC_CT_RFT_ID		0x10	 /* RFT_ID accepted by switch */
614 
615 	struct list_head fc_nodes;
616 
617 	/* Keep counters for the number of entries in each list. */
618 	uint16_t fc_plogi_cnt;
619 	uint16_t fc_adisc_cnt;
620 	uint16_t fc_reglogin_cnt;
621 	uint16_t fc_prli_cnt;
622 	uint16_t fc_unmap_cnt;
623 	uint16_t fc_map_cnt;
624 	uint16_t fc_npr_cnt;
625 	uint16_t fc_unused_cnt;
626 	struct serv_parm fc_sparam;	/* buffer for our service parameters */
627 
628 	uint32_t fc_myDID;	/* fibre channel S_ID */
629 	uint32_t fc_prevDID;	/* previous fibre channel S_ID */
630 	struct lpfc_name fabric_portname;
631 	struct lpfc_name fabric_nodename;
632 
633 	int32_t stopped;   /* HBA has not been restarted since last ERATT */
634 	uint8_t fc_linkspeed;	/* Link speed after last READ_LA */
635 
636 	uint32_t num_disc_nodes;	/* in addition to hba_state */
637 	uint32_t gidft_inp;		/* cnt of outstanding GID_FTs */
638 
639 	uint32_t fc_nlp_cnt;	/* outstanding NODELIST requests */
640 	uint32_t fc_rscn_id_cnt;	/* count of RSCNs payloads in list */
641 	uint32_t fc_rscn_flush;		/* flag use of fc_rscn_id_list */
642 	struct lpfc_dmabuf *fc_rscn_id_list[FC_MAX_HOLD_RSCN];
643 	struct lpfc_name fc_nodename;	/* fc nodename */
644 	struct lpfc_name fc_portname;	/* fc portname */
645 
646 	struct lpfc_work_evt disc_timeout_evt;
647 
648 	struct timer_list fc_disctmo;	/* Discovery rescue timer */
649 	uint8_t fc_ns_retry;	/* retries for fabric nameserver */
650 	uint32_t fc_prli_sent;	/* cntr for outstanding PRLIs */
651 
652 	spinlock_t work_port_lock;
653 	uint32_t work_port_events; /* Timeout to be handled  */
654 #define WORKER_DISC_TMO                0x1	/* vport: Discovery timeout */
655 #define WORKER_ELS_TMO                 0x2	/* vport: ELS timeout */
656 #define WORKER_DELAYED_DISC_TMO        0x8	/* vport: delayed discovery */
657 
658 #define WORKER_MBOX_TMO                0x100	/* hba: MBOX timeout */
659 #define WORKER_HB_TMO                  0x200	/* hba: Heart beat timeout */
660 #define WORKER_FABRIC_BLOCK_TMO        0x400	/* hba: fabric block timeout */
661 #define WORKER_RAMP_DOWN_QUEUE         0x800	/* hba: Decrease Q depth */
662 #define WORKER_RAMP_UP_QUEUE           0x1000	/* hba: Increase Q depth */
663 #define WORKER_SERVICE_TXQ             0x2000	/* hba: IOCBs on the txq */
664 #define WORKER_CHECK_INACTIVE_VMID     0x4000	/* hba: check inactive vmids */
665 #define WORKER_CHECK_VMID_ISSUE_QFPA   0x8000	/* vport: Check if qfpa needs
666 						 * to be issued */
667 
668 	struct timer_list els_tmofunc;
669 	struct timer_list delayed_disc_tmo;
670 
671 	uint8_t load_flag;
672 #define FC_LOADING		0x1	/* HBA in process of loading drvr */
673 #define FC_UNLOADING		0x2	/* HBA in process of unloading drvr */
674 #define FC_ALLOW_FDMI		0x4	/* port is ready for FDMI requests */
675 #define FC_ALLOW_VMID		0x8	/* Allow VMID I/Os */
676 #define FC_DEREGISTER_ALL_APP_ID	0x10	/* Deregister all VMIDs */
677 	/* Vport Config Parameters */
678 	uint32_t cfg_scan_down;
679 	uint32_t cfg_lun_queue_depth;
680 	uint32_t cfg_nodev_tmo;
681 	uint32_t cfg_devloss_tmo;
682 	uint32_t cfg_restrict_login;
683 	uint32_t cfg_peer_port_login;
684 	uint32_t cfg_fcp_class;
685 	uint32_t cfg_use_adisc;
686 	uint32_t cfg_discovery_threads;
687 	uint32_t cfg_log_verbose;
688 	uint32_t cfg_enable_fc4_type;
689 	uint32_t cfg_max_luns;
690 	uint32_t cfg_enable_da_id;
691 	uint32_t cfg_max_scsicmpl_time;
692 	uint32_t cfg_tgt_queue_depth;
693 	uint32_t cfg_first_burst_size;
694 	uint32_t dev_loss_tmo_changed;
695 	/* VMID parameters */
696 	u8 lpfc_vmid_host_uuid[LPFC_COMPRESS_VMID_SIZE];
697 	u32 max_vmid;	/* maximum VMIDs allowed per port */
698 	u32 cur_vmid_cnt;	/* Current VMID count */
699 #define LPFC_MIN_VMID	4
700 #define LPFC_MAX_VMID	255
701 	u32 vmid_inactivity_timeout;	/* Time after which the VMID */
702 						/* deregisters from switch */
703 	u32 vmid_priority_tagging;
704 #define LPFC_VMID_PRIO_TAG_DISABLE	0 /* Disable */
705 #define LPFC_VMID_PRIO_TAG_SUP_TARGETS	1 /* Allow supported targets only */
706 #define LPFC_VMID_PRIO_TAG_ALL_TARGETS	2 /* Allow all targets */
707 	unsigned long *vmid_priority_range;
708 #define LPFC_VMID_MAX_PRIORITY_RANGE    256
709 #define LPFC_VMID_PRIORITY_BITMAP_SIZE  32
710 	u8 vmid_flag;
711 #define LPFC_VMID_IN_USE		0x1
712 #define LPFC_VMID_ISSUE_QFPA		0x2
713 #define LPFC_VMID_QFPA_CMPL		0x4
714 #define LPFC_VMID_QOS_ENABLED		0x8
715 #define LPFC_VMID_TIMER_ENBLD		0x10
716 	struct fc_qfpa_res *qfpa_res;
717 
718 	struct fc_vport *fc_vport;
719 
720 	struct lpfc_vmid *vmid;
721 	DECLARE_HASHTABLE(hash_table, 8);
722 	rwlock_t vmid_lock;
723 	struct lpfc_vmid_priority_info vmid_priority;
724 
725 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
726 	struct dentry *debug_disc_trc;
727 	struct dentry *debug_nodelist;
728 	struct dentry *debug_nvmestat;
729 	struct dentry *debug_scsistat;
730 	struct dentry *debug_ioktime;
731 	struct dentry *debug_hdwqstat;
732 	struct dentry *vport_debugfs_root;
733 	struct lpfc_debugfs_trc *disc_trc;
734 	atomic_t disc_trc_cnt;
735 #endif
736 	uint8_t stat_data_enabled;
737 	uint8_t stat_data_blocked;
738 	struct list_head rcv_buffer_list;
739 	unsigned long rcv_buffer_time_stamp;
740 	uint32_t vport_flag;
741 #define STATIC_VPORT	1
742 #define FAWWPN_SET	2
743 #define FAWWPN_PARAM_CHG	4
744 
745 	uint16_t fdmi_num_disc;
746 	uint32_t fdmi_hba_mask;
747 	uint32_t fdmi_port_mask;
748 
749 	/* There is a single nvme instance per vport. */
750 	struct nvme_fc_local_port *localport;
751 	uint8_t  nvmei_support; /* driver supports NVME Initiator */
752 	uint32_t last_fcp_wqidx;
753 	uint32_t rcv_flogi_cnt; /* How many unsol FLOGIs ACK'd. */
754 };
755 
756 struct hbq_s {
757 	uint16_t entry_count;	  /* Current number of HBQ slots */
758 	uint16_t buffer_count;	  /* Current number of buffers posted */
759 	uint32_t next_hbqPutIdx;  /* Index to next HBQ slot to use */
760 	uint32_t hbqPutIdx;	  /* HBQ slot to use */
761 	uint32_t local_hbqGetIdx; /* Local copy of Get index from Port */
762 	void    *hbq_virt;	  /* Virtual ptr to this hbq */
763 	struct list_head hbq_buffer_list;  /* buffers assigned to this HBQ */
764 				  /* Callback for HBQ buffer allocation */
765 	struct hbq_dmabuf *(*hbq_alloc_buffer) (struct lpfc_hba *);
766 				  /* Callback for HBQ buffer free */
767 	void               (*hbq_free_buffer) (struct lpfc_hba *,
768 					       struct hbq_dmabuf *);
769 };
770 
771 /* this matches the position in the lpfc_hbq_defs array */
772 #define LPFC_ELS_HBQ	0
773 #define LPFC_MAX_HBQS	1
774 
775 enum hba_temp_state {
776 	HBA_NORMAL_TEMP,
777 	HBA_OVER_TEMP
778 };
779 
780 enum intr_type_t {
781 	NONE = 0,
782 	INTx,
783 	MSI,
784 	MSIX,
785 };
786 
787 #define LPFC_CT_CTX_MAX		64
788 struct unsol_rcv_ct_ctx {
789 	uint32_t ctxt_id;
790 	uint32_t SID;
791 	uint32_t valid;
792 #define UNSOL_INVALID		0
793 #define UNSOL_VALID		1
794 	uint16_t oxid;
795 	uint16_t rxid;
796 };
797 
798 #define LPFC_USER_LINK_SPEED_AUTO	0	/* auto select (default)*/
799 #define LPFC_USER_LINK_SPEED_1G		1	/* 1 Gigabaud */
800 #define LPFC_USER_LINK_SPEED_2G		2	/* 2 Gigabaud */
801 #define LPFC_USER_LINK_SPEED_4G		4	/* 4 Gigabaud */
802 #define LPFC_USER_LINK_SPEED_8G		8	/* 8 Gigabaud */
803 #define LPFC_USER_LINK_SPEED_10G	10	/* 10 Gigabaud */
804 #define LPFC_USER_LINK_SPEED_16G	16	/* 16 Gigabaud */
805 #define LPFC_USER_LINK_SPEED_32G	32	/* 32 Gigabaud */
806 #define LPFC_USER_LINK_SPEED_64G	64	/* 64 Gigabaud */
807 #define LPFC_USER_LINK_SPEED_MAX	LPFC_USER_LINK_SPEED_64G
808 
809 #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16, 32, 64"
810 
811 enum nemb_type {
812 	nemb_mse = 1,
813 	nemb_hbd
814 };
815 
816 enum mbox_type {
817 	mbox_rd = 1,
818 	mbox_wr
819 };
820 
821 enum dma_type {
822 	dma_mbox = 1,
823 	dma_ebuf
824 };
825 
826 enum sta_type {
827 	sta_pre_addr = 1,
828 	sta_pos_addr
829 };
830 
831 struct lpfc_mbox_ext_buf_ctx {
832 	uint32_t state;
833 #define LPFC_BSG_MBOX_IDLE		0
834 #define LPFC_BSG_MBOX_HOST              1
835 #define LPFC_BSG_MBOX_PORT		2
836 #define LPFC_BSG_MBOX_DONE		3
837 #define LPFC_BSG_MBOX_ABTS		4
838 	enum nemb_type nembType;
839 	enum mbox_type mboxType;
840 	uint32_t numBuf;
841 	uint32_t mbxTag;
842 	uint32_t seqNum;
843 	struct lpfc_dmabuf *mbx_dmabuf;
844 	struct list_head ext_dmabuf_list;
845 };
846 
847 struct lpfc_epd_pool {
848 	/* Expedite pool */
849 	struct list_head list;
850 	u32 count;
851 	spinlock_t lock;	/* lock for expedite pool */
852 };
853 
854 enum ras_state {
855 	INACTIVE,
856 	REG_INPROGRESS,
857 	ACTIVE
858 };
859 
860 struct lpfc_ras_fwlog {
861 	uint8_t *fwlog_buff;
862 	uint32_t fw_buffcount; /* Buffer size posted to FW */
863 #define LPFC_RAS_BUFF_ENTERIES  16      /* Each entry can hold max of 64k */
864 #define LPFC_RAS_MAX_ENTRY_SIZE (64 * 1024)
865 #define LPFC_RAS_MIN_BUFF_POST_SIZE (256 * 1024)
866 #define LPFC_RAS_MAX_BUFF_POST_SIZE (1024 * 1024)
867 	uint32_t fw_loglevel; /* Log level set */
868 	struct lpfc_dmabuf lwpd;
869 	struct list_head fwlog_buff_list;
870 
871 	/* RAS support status on adapter */
872 	bool ras_hwsupport; /* RAS Support available on HW or not */
873 	bool ras_enabled;   /* Ras Enabled for the function */
874 #define LPFC_RAS_DISABLE_LOGGING 0x00
875 #define LPFC_RAS_ENABLE_LOGGING 0x01
876 	enum ras_state state;    /* RAS logging running state */
877 };
878 
879 #define DBG_LOG_STR_SZ 256
880 #define DBG_LOG_SZ 256
881 
882 struct dbg_log_ent {
883 	char log[DBG_LOG_STR_SZ];
884 	u64     t_ns;
885 };
886 
887 enum lpfc_irq_chann_mode {
888 	/* Assign IRQs to all possible cpus that have hardware queues */
889 	NORMAL_MODE,
890 
891 	/* Assign IRQs only to cpus on the same numa node as HBA */
892 	NUMA_MODE,
893 
894 	/* Assign IRQs only on non-hyperthreaded CPUs. This is the
895 	 * same as normal_mode, but assign IRQS only on physical CPUs.
896 	 */
897 	NHT_MODE,
898 };
899 
900 struct lpfc_hba {
901 	/* SCSI interface function jump table entries */
902 	struct lpfc_io_buf * (*lpfc_get_scsi_buf)
903 		(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
904 		struct scsi_cmnd *cmnd);
905 	int (*lpfc_scsi_prep_dma_buf)
906 		(struct lpfc_hba *, struct lpfc_io_buf *);
907 	void (*lpfc_scsi_unprep_dma_buf)
908 		(struct lpfc_hba *, struct lpfc_io_buf *);
909 	void (*lpfc_release_scsi_buf)
910 		(struct lpfc_hba *, struct lpfc_io_buf *);
911 	void (*lpfc_rampdown_queue_depth)
912 		(struct lpfc_hba *);
913 	void (*lpfc_scsi_prep_cmnd)
914 		(struct lpfc_vport *, struct lpfc_io_buf *,
915 		 struct lpfc_nodelist *);
916 	int (*lpfc_scsi_prep_cmnd_buf)
917 		(struct lpfc_vport *vport,
918 		 struct lpfc_io_buf *lpfc_cmd,
919 		 uint8_t tmo);
920 
921 	/* IOCB interface function jump table entries */
922 	int (*__lpfc_sli_issue_iocb)
923 		(struct lpfc_hba *, uint32_t,
924 		 struct lpfc_iocbq *, uint32_t);
925 	int (*__lpfc_sli_issue_fcp_io)
926 		(struct lpfc_hba *phba, uint32_t ring_number,
927 		 struct lpfc_iocbq *piocb, uint32_t flag);
928 	void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
929 			 struct lpfc_iocbq *);
930 	int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
931 	IOCB_t * (*lpfc_get_iocb_from_iocbq)
932 		(struct lpfc_iocbq *);
933 	void (*lpfc_scsi_cmd_iocb_cmpl)
934 		(struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *);
935 
936 	/* MBOX interface function jump table entries */
937 	int (*lpfc_sli_issue_mbox)
938 		(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
939 
940 	/* Slow-path IOCB process function jump table entries */
941 	void (*lpfc_sli_handle_slow_ring_event)
942 		(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
943 		 uint32_t mask);
944 
945 	/* INIT device interface function jump table entries */
946 	int (*lpfc_sli_hbq_to_firmware)
947 		(struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
948 	int (*lpfc_sli_brdrestart)
949 		(struct lpfc_hba *);
950 	int (*lpfc_sli_brdready)
951 		(struct lpfc_hba *, uint32_t);
952 	void (*lpfc_handle_eratt)
953 		(struct lpfc_hba *);
954 	void (*lpfc_stop_port)
955 		(struct lpfc_hba *);
956 	int (*lpfc_hba_init_link)
957 		(struct lpfc_hba *, uint32_t);
958 	int (*lpfc_hba_down_link)
959 		(struct lpfc_hba *, uint32_t);
960 	int (*lpfc_selective_reset)
961 		(struct lpfc_hba *);
962 
963 	int (*lpfc_bg_scsi_prep_dma_buf)
964 		(struct lpfc_hba *, struct lpfc_io_buf *);
965 	/* Add new entries here */
966 
967 	/* expedite pool */
968 	struct lpfc_epd_pool epd_pool;
969 
970 	/* SLI4 specific HBA data structure */
971 	struct lpfc_sli4_hba sli4_hba;
972 
973 	struct workqueue_struct *wq;
974 	struct delayed_work     eq_delay_work;
975 
976 #define LPFC_IDLE_STAT_DELAY 1000
977 	struct delayed_work	idle_stat_delay_work;
978 
979 	struct lpfc_sli sli;
980 	uint8_t pci_dev_grp;	/* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
981 	uint32_t sli_rev;		/* SLI2, SLI3, or SLI4 */
982 	uint32_t sli3_options;		/* Mask of enabled SLI3 options */
983 #define LPFC_SLI3_HBQ_ENABLED		0x01
984 #define LPFC_SLI3_NPIV_ENABLED		0x02
985 #define LPFC_SLI3_VPORT_TEARDOWN	0x04
986 #define LPFC_SLI3_CRP_ENABLED		0x08
987 #define LPFC_SLI3_BG_ENABLED		0x20
988 #define LPFC_SLI3_DSS_ENABLED		0x40
989 #define LPFC_SLI4_PERFH_ENABLED		0x80
990 #define LPFC_SLI4_PHWQ_ENABLED		0x100
991 	uint32_t iocb_cmd_size;
992 	uint32_t iocb_rsp_size;
993 
994 	struct lpfc_trunk_link  trunk_link;
995 	enum hba_state link_state;
996 	uint32_t link_flag;	/* link state flags */
997 #define LS_LOOPBACK_MODE      0x1	/* NPort is in Loopback mode */
998 					/* This flag is set while issuing */
999 					/* INIT_LINK mailbox command */
1000 #define LS_NPIV_FAB_SUPPORTED 0x2	/* Fabric supports NPIV */
1001 #define LS_IGNORE_ERATT       0x4	/* intr handler should ignore ERATT */
1002 #define LS_MDS_LINK_DOWN      0x8	/* MDS Diagnostics Link Down */
1003 #define LS_MDS_LOOPBACK       0x10	/* MDS Diagnostics Link Up (Loopback) */
1004 #define LS_CT_VEN_RPA         0x20	/* Vendor RPA sent to switch */
1005 
1006 	uint32_t hba_flag;	/* hba generic flags */
1007 #define HBA_ERATT_HANDLED	0x1 /* This flag is set when eratt handled */
1008 #define DEFER_ERATT		0x2 /* Deferred error attention in progress */
1009 #define HBA_FCOE_MODE		0x4 /* HBA function in FCoE Mode */
1010 #define HBA_SP_QUEUE_EVT	0x8 /* Slow-path qevt posted to worker thread*/
1011 #define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
1012 #define HBA_PERSISTENT_TOPO	0x20 /* Persistent topology support in hba */
1013 #define ELS_XRI_ABORT_EVENT	0x40 /* ELS_XRI abort event was queued */
1014 #define ASYNC_EVENT		0x80
1015 #define LINK_DISABLED		0x100 /* Link disabled by user */
1016 #define FCF_TS_INPROG           0x200 /* FCF table scan in progress */
1017 #define FCF_RR_INPROG           0x400 /* FCF roundrobin flogi in progress */
1018 #define HBA_FIP_SUPPORT		0x800 /* FIP support in HBA */
1019 #define HBA_AER_ENABLED		0x1000 /* AER enabled with HBA */
1020 #define HBA_DEVLOSS_TMO         0x2000 /* HBA in devloss timeout */
1021 #define HBA_RRQ_ACTIVE		0x4000 /* process the rrq active list */
1022 #define HBA_IOQ_FLUSH		0x8000 /* FCP/NVME I/O queues being flushed */
1023 #define HBA_RECOVERABLE_UE	0x20000 /* Firmware supports recoverable UE */
1024 #define HBA_FORCED_LINK_SPEED	0x40000 /*
1025 					 * Firmware supports Forced Link Speed
1026 					 * capability
1027 					 */
1028 #define HBA_PCI_ERR		0x80000 /* The PCI slot is offline */
1029 #define HBA_FLOGI_ISSUED	0x100000 /* FLOGI was issued */
1030 #define HBA_SHORT_CMF		0x200000 /* shorter CMF timer routine */
1031 #define HBA_CGN_DAY_WRAP	0x400000 /* HBA Congestion info day wraps */
1032 #define HBA_DEFER_FLOGI		0x800000 /* Defer FLOGI till read_sparm cmpl */
1033 #define HBA_SETUP		0x1000000 /* Signifies HBA setup is completed */
1034 #define HBA_NEEDS_CFG_PORT	0x2000000 /* SLI3 - needs a CONFIG_PORT mbox */
1035 #define HBA_HBEAT_INP		0x4000000 /* mbox HBEAT is in progress */
1036 #define HBA_HBEAT_TMO		0x8000000 /* HBEAT initiated after timeout */
1037 #define HBA_FLOGI_OUTSTANDING	0x10000000 /* FLOGI is outstanding */
1038 
1039 	struct completion *fw_dump_cmpl; /* cmpl event tracker for fw_dump */
1040 	uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
1041 	struct lpfc_dmabuf slim2p;
1042 
1043 	MAILBOX_t *mbox;
1044 	uint32_t *mbox_ext;
1045 	struct lpfc_mbox_ext_buf_ctx mbox_ext_buf_ctx;
1046 	uint32_t ha_copy;
1047 	struct _PCB *pcb;
1048 	struct _IOCB *IOCBs;
1049 
1050 	struct lpfc_dmabuf hbqslimp;
1051 
1052 	uint16_t pci_cfg_value;
1053 
1054 	uint8_t fc_linkspeed;	/* Link speed after last READ_LA */
1055 
1056 	uint32_t fc_eventTag;	/* event tag for link attention */
1057 	uint32_t link_events;
1058 
1059 	/* These fields used to be binfo */
1060 	uint32_t fc_pref_DID;	/* preferred D_ID */
1061 	uint8_t  fc_pref_ALPA;	/* preferred AL_PA */
1062 	uint32_t fc_edtovResol; /* E_D_TOV timer resolution */
1063 	uint32_t fc_edtov;	/* E_D_TOV timer value */
1064 	uint32_t fc_arbtov;	/* ARB_TOV timer value */
1065 	uint32_t fc_ratov;	/* R_A_TOV timer value */
1066 	uint32_t fc_rttov;	/* R_T_TOV timer value */
1067 	uint32_t fc_altov;	/* AL_TOV timer value */
1068 	uint32_t fc_crtov;	/* C_R_TOV timer value */
1069 
1070 	struct serv_parm fc_fabparam;	/* fabric service parameters buffer */
1071 	uint8_t alpa_map[128];	/* AL_PA map from READ_LA */
1072 
1073 	uint32_t lmt;
1074 
1075 	uint32_t fc_topology;	/* link topology, from LINK INIT */
1076 	uint32_t fc_topology_changed;	/* link topology, from LINK INIT */
1077 
1078 	struct lpfc_stats fc_stat;
1079 
1080 	struct lpfc_nodelist fc_fcpnodev; /* nodelist entry for no device */
1081 	uint32_t nport_event_cnt;	/* timestamp for nlplist entry */
1082 
1083 	uint8_t  wwnn[8];
1084 	uint8_t  wwpn[8];
1085 	uint32_t RandomData[7];
1086 	uint8_t  fcp_embed_io;
1087 	uint8_t  nvmet_support;	/* driver supports NVMET */
1088 #define LPFC_NVMET_MAX_PORTS	32
1089 	uint8_t  mds_diags_support;
1090 	uint8_t  bbcredit_support;
1091 	uint8_t  enab_exp_wqcq_pages;
1092 	u8	 nsler; /* Firmware supports FC-NVMe-2 SLER */
1093 
1094 	/* HBA Config Parameters */
1095 	uint32_t cfg_ack0;
1096 	uint32_t cfg_xri_rebalancing;
1097 	uint32_t cfg_xpsgl;
1098 	uint32_t cfg_enable_npiv;
1099 	uint32_t cfg_enable_rrq;
1100 	uint32_t cfg_topology;
1101 	uint32_t cfg_link_speed;
1102 #define LPFC_FCF_FOV 1		/* Fast fcf failover */
1103 #define LPFC_FCF_PRIORITY 2	/* Priority fcf failover */
1104 	uint32_t cfg_fcf_failover_policy;
1105 	uint32_t cfg_fcp_io_sched;
1106 	uint32_t cfg_ns_query;
1107 	uint32_t cfg_fcp2_no_tgt_reset;
1108 	uint32_t cfg_cr_delay;
1109 	uint32_t cfg_cr_count;
1110 	uint32_t cfg_multi_ring_support;
1111 	uint32_t cfg_multi_ring_rctl;
1112 	uint32_t cfg_multi_ring_type;
1113 	uint32_t cfg_poll;
1114 	uint32_t cfg_poll_tmo;
1115 	uint32_t cfg_task_mgmt_tmo;
1116 	uint32_t cfg_use_msi;
1117 	uint32_t cfg_auto_imax;
1118 	uint32_t cfg_fcp_imax;
1119 	uint32_t cfg_force_rscn;
1120 	uint32_t cfg_cq_poll_threshold;
1121 	uint32_t cfg_cq_max_proc_limit;
1122 	uint32_t cfg_fcp_cpu_map;
1123 	uint32_t cfg_fcp_mq_threshold;
1124 	uint32_t cfg_hdw_queue;
1125 	uint32_t cfg_irq_chann;
1126 	uint32_t cfg_suppress_rsp;
1127 	uint32_t cfg_nvme_oas;
1128 	uint32_t cfg_nvme_embed_cmd;
1129 	uint32_t cfg_nvmet_mrq_post;
1130 	uint32_t cfg_nvmet_mrq;
1131 	uint32_t cfg_enable_nvmet;
1132 	uint32_t cfg_nvme_enable_fb;
1133 	uint32_t cfg_nvmet_fb_size;
1134 	uint32_t cfg_total_seg_cnt;
1135 	uint32_t cfg_sg_seg_cnt;
1136 	uint32_t cfg_nvme_seg_cnt;
1137 	uint32_t cfg_scsi_seg_cnt;
1138 	uint32_t cfg_sg_dma_buf_size;
1139 	uint64_t cfg_soft_wwnn;
1140 	uint64_t cfg_soft_wwpn;
1141 	uint32_t cfg_hba_queue_depth;
1142 	uint32_t cfg_enable_hba_reset;
1143 	uint32_t cfg_enable_hba_heartbeat;
1144 	uint32_t cfg_fof;
1145 	uint32_t cfg_EnableXLane;
1146 	uint8_t cfg_oas_tgt_wwpn[8];
1147 	uint8_t cfg_oas_vpt_wwpn[8];
1148 	uint32_t cfg_oas_lun_state;
1149 #define OAS_LUN_ENABLE	1
1150 #define OAS_LUN_DISABLE	0
1151 	uint32_t cfg_oas_lun_status;
1152 #define OAS_LUN_STATUS_EXISTS	0x01
1153 	uint32_t cfg_oas_flags;
1154 #define OAS_FIND_ANY_VPORT	0x01
1155 #define OAS_FIND_ANY_TARGET	0x02
1156 #define OAS_LUN_VALID	0x04
1157 	uint32_t cfg_oas_priority;
1158 	uint32_t cfg_XLanePriority;
1159 	uint32_t cfg_enable_bg;
1160 	uint32_t cfg_prot_mask;
1161 	uint32_t cfg_prot_guard;
1162 	uint32_t cfg_hostmem_hgp;
1163 	uint32_t cfg_log_verbose;
1164 	uint32_t cfg_enable_fc4_type;
1165 #define LPFC_ENABLE_FCP  1
1166 #define LPFC_ENABLE_NVME 2
1167 #define LPFC_ENABLE_BOTH 3
1168 #if (IS_ENABLED(CONFIG_NVME_FC))
1169 #define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_BOTH
1170 #define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_BOTH
1171 #else
1172 #define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_FCP
1173 #define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_FCP
1174 #endif
1175 	uint32_t cfg_aer_support;
1176 	uint32_t cfg_sriov_nr_virtfn;
1177 	uint32_t cfg_request_firmware_upgrade;
1178 	uint32_t cfg_suppress_link_up;
1179 	uint32_t cfg_rrq_xri_bitmap_sz;
1180 	u32      cfg_fcp_wait_abts_rsp;
1181 	uint32_t cfg_delay_discovery;
1182 	uint32_t cfg_sli_mode;
1183 #define LPFC_INITIALIZE_LINK              0	/* do normal init_link mbox */
1184 #define LPFC_DELAY_INIT_LINK              1	/* layered driver hold off */
1185 #define LPFC_DELAY_INIT_LINK_INDEFINITELY 2	/* wait, manual intervention */
1186 	uint32_t cfg_fdmi_on;
1187 #define LPFC_FDMI_NO_SUPPORT	0	/* FDMI not supported */
1188 #define LPFC_FDMI_SUPPORT	1	/* FDMI supported? */
1189 	uint32_t cfg_enable_SmartSAN;
1190 	uint32_t cfg_enable_mds_diags;
1191 	uint32_t cfg_ras_fwlog_level;
1192 	uint32_t cfg_ras_fwlog_buffsize;
1193 	uint32_t cfg_ras_fwlog_func;
1194 	uint32_t cfg_enable_bbcr;	/* Enable BB Credit Recovery */
1195 	uint32_t cfg_enable_dpp;	/* Enable Direct Packet Push */
1196 	uint32_t cfg_enable_pbde;
1197 	uint32_t cfg_enable_mi;
1198 	struct nvmet_fc_target_port *targetport;
1199 	lpfc_vpd_t vpd;		/* vital product data */
1200 
1201 	u32 cfg_max_vmid;	/* maximum VMIDs allowed per port */
1202 	u32 cfg_vmid_app_header;
1203 #define LPFC_VMID_APP_HEADER_DISABLE	0
1204 #define LPFC_VMID_APP_HEADER_ENABLE	1
1205 	u32 cfg_vmid_priority_tagging;
1206 	u32 cfg_vmid_inactivity_timeout;	/* Time after which the VMID */
1207 						/* deregisters from switch */
1208 	struct pci_dev *pcidev;
1209 	struct list_head      work_list;
1210 	uint32_t              work_ha;      /* Host Attention Bits for WT */
1211 	uint32_t              work_ha_mask; /* HA Bits owned by WT        */
1212 	uint32_t              work_hs;      /* HS stored in case of ERRAT */
1213 	uint32_t              work_status[2]; /* Extra status from SLIM */
1214 
1215 	wait_queue_head_t    work_waitq;
1216 	struct task_struct   *worker_thread;
1217 	unsigned long data_flags;
1218 	uint32_t border_sge_num;
1219 
1220 	uint32_t hbq_in_use;		/* HBQs in use flag */
1221 	uint32_t hbq_count;	        /* Count of configured HBQs */
1222 	struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies  */
1223 
1224 	atomic_t fcp_qidx;         /* next FCP WQ (RR Policy) */
1225 	atomic_t nvme_qidx;        /* next NVME WQ (RR Policy) */
1226 
1227 	phys_addr_t pci_bar0_map;     /* Physical address for PCI BAR0 */
1228 	phys_addr_t pci_bar1_map;     /* Physical address for PCI BAR1 */
1229 	phys_addr_t pci_bar2_map;     /* Physical address for PCI BAR2 */
1230 	void __iomem *slim_memmap_p;	/* Kernel memory mapped address for
1231 					   PCI BAR0 */
1232 	void __iomem *ctrl_regs_memmap_p;/* Kernel memory mapped address for
1233 					    PCI BAR2 */
1234 
1235 	void __iomem *pci_bar0_memmap_p; /* Kernel memory mapped address for
1236 					    PCI BAR0 with dual-ULP support */
1237 	void __iomem *pci_bar2_memmap_p; /* Kernel memory mapped address for
1238 					    PCI BAR2 with dual-ULP support */
1239 	void __iomem *pci_bar4_memmap_p; /* Kernel memory mapped address for
1240 					    PCI BAR4 with dual-ULP support */
1241 #define PCI_64BIT_BAR0	0
1242 #define PCI_64BIT_BAR2	2
1243 #define PCI_64BIT_BAR4	4
1244 	void __iomem *MBslimaddr;	/* virtual address for mbox cmds */
1245 	void __iomem *HAregaddr;	/* virtual address for host attn reg */
1246 	void __iomem *CAregaddr;	/* virtual address for chip attn reg */
1247 	void __iomem *HSregaddr;	/* virtual address for host status
1248 					   reg */
1249 	void __iomem *HCregaddr;	/* virtual address for host ctl reg */
1250 
1251 	struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */
1252 	struct lpfc_pgp   *port_gp;
1253 	uint32_t __iomem  *hbq_put;     /* Address in SLIM to HBQ put ptrs */
1254 	uint32_t          *hbq_get;     /* Host mem address of HBQ get ptrs */
1255 
1256 	int brd_no;			/* FC board number */
1257 	char SerialNumber[32];		/* adapter Serial Number */
1258 	char OptionROMVersion[32];	/* adapter BIOS / Fcode version */
1259 	char BIOSVersion[16];		/* Boot BIOS version */
1260 	char ModelDesc[256];		/* Model Description */
1261 	char ModelName[80];		/* Model Name */
1262 	char ProgramType[256];		/* Program Type */
1263 	char Port[20];			/* Port No */
1264 	uint8_t vpd_flag;               /* VPD data flag */
1265 
1266 #define VPD_MODEL_DESC      0x1         /* valid vpd model description */
1267 #define VPD_MODEL_NAME      0x2         /* valid vpd model name */
1268 #define VPD_PROGRAM_TYPE    0x4         /* valid vpd program type */
1269 #define VPD_PORT            0x8         /* valid vpd port data */
1270 #define VPD_MASK            0xf         /* mask for any vpd data */
1271 
1272 	uint8_t soft_wwn_enable;
1273 
1274 	struct timer_list fcp_poll_timer;
1275 	struct timer_list eratt_poll;
1276 	uint32_t eratt_poll_interval;
1277 
1278 	uint64_t bg_guard_err_cnt;
1279 	uint64_t bg_apptag_err_cnt;
1280 	uint64_t bg_reftag_err_cnt;
1281 
1282 	/* fastpath list. */
1283 	spinlock_t scsi_buf_list_get_lock;  /* SCSI buf alloc list lock */
1284 	spinlock_t scsi_buf_list_put_lock;  /* SCSI buf free list lock */
1285 	struct list_head lpfc_scsi_buf_list_get;
1286 	struct list_head lpfc_scsi_buf_list_put;
1287 	uint32_t total_scsi_bufs;
1288 	struct list_head lpfc_iocb_list;
1289 	uint32_t total_iocbq_bufs;
1290 	struct list_head active_rrq_list;
1291 	spinlock_t hbalock;
1292 	struct work_struct  unblock_request_work; /* SCSI layer unblock IOs */
1293 
1294 	/* dma_mem_pools */
1295 	struct dma_pool *lpfc_sg_dma_buf_pool;
1296 	struct dma_pool *lpfc_mbuf_pool;
1297 	struct dma_pool *lpfc_hrb_pool;	/* header receive buffer pool */
1298 	struct dma_pool *lpfc_drb_pool; /* data receive buffer pool */
1299 	struct dma_pool *lpfc_nvmet_drb_pool; /* data receive buffer pool */
1300 	struct dma_pool *lpfc_hbq_pool;	/* SLI3 hbq buffer pool */
1301 	struct dma_pool *lpfc_cmd_rsp_buf_pool;
1302 	struct lpfc_dma_pool lpfc_mbuf_safety_pool;
1303 
1304 	mempool_t *mbox_mem_pool;
1305 	mempool_t *nlp_mem_pool;
1306 	mempool_t *rrq_pool;
1307 	mempool_t *active_rrq_pool;
1308 
1309 	struct fc_host_statistics link_stats;
1310 	enum lpfc_irq_chann_mode irq_chann_mode;
1311 	enum intr_type_t intr_type;
1312 	uint32_t intr_mode;
1313 #define LPFC_INTR_ERROR	0xFFFFFFFF
1314 	struct list_head port_list;
1315 	spinlock_t port_list_lock;	/* lock for port_list mutations */
1316 	struct lpfc_vport *pport;	/* physical lpfc_vport pointer */
1317 	uint16_t max_vpi;		/* Maximum virtual nports */
1318 #define LPFC_MAX_VPI	0xFF		/* Max number VPI supported 0 - 0xff */
1319 #define LPFC_MAX_VPORTS	0x100		/* Max vports per port, with pport */
1320 	uint16_t max_vports;            /*
1321 					 * For IOV HBAs max_vpi can change
1322 					 * after a reset. max_vports is max
1323 					 * number of vports present. This can
1324 					 * be greater than max_vpi.
1325 					 */
1326 	uint16_t vpi_base;
1327 	uint16_t vfi_base;
1328 	unsigned long *vpi_bmask;	/* vpi allocation table */
1329 	uint16_t *vpi_ids;
1330 	uint16_t vpi_count;
1331 	struct list_head lpfc_vpi_blk_list;
1332 
1333 	/* Data structure used by fabric iocb scheduler */
1334 	struct list_head fabric_iocb_list;
1335 	atomic_t fabric_iocb_count;
1336 	struct timer_list fabric_block_timer;
1337 	unsigned long bit_flags;
1338 #define	FABRIC_COMANDS_BLOCKED	0
1339 	atomic_t num_rsrc_err;
1340 	atomic_t num_cmd_success;
1341 	unsigned long last_rsrc_error_time;
1342 	unsigned long last_ramp_down_time;
1343 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1344 	struct dentry *hba_debugfs_root;
1345 	atomic_t debugfs_vport_count;
1346 	struct dentry *debug_multixri_pools;
1347 	struct dentry *debug_hbqinfo;
1348 	struct dentry *debug_dumpHostSlim;
1349 	struct dentry *debug_dumpHBASlim;
1350 	struct dentry *debug_InjErrLBA;  /* LBA to inject errors at */
1351 	struct dentry *debug_InjErrNPortID;  /* NPortID to inject errors at */
1352 	struct dentry *debug_InjErrWWPN;  /* WWPN to inject errors at */
1353 	struct dentry *debug_writeGuard; /* inject write guard_tag errors */
1354 	struct dentry *debug_writeApp;   /* inject write app_tag errors */
1355 	struct dentry *debug_writeRef;   /* inject write ref_tag errors */
1356 	struct dentry *debug_readGuard;  /* inject read guard_tag errors */
1357 	struct dentry *debug_readApp;    /* inject read app_tag errors */
1358 	struct dentry *debug_readRef;    /* inject read ref_tag errors */
1359 
1360 	struct dentry *debug_nvmeio_trc;
1361 	struct lpfc_debugfs_nvmeio_trc *nvmeio_trc;
1362 	struct dentry *debug_hdwqinfo;
1363 #ifdef LPFC_HDWQ_LOCK_STAT
1364 	struct dentry *debug_lockstat;
1365 #endif
1366 	struct dentry *debug_cgn_buffer;
1367 	struct dentry *debug_rx_monitor;
1368 	struct dentry *debug_ras_log;
1369 	atomic_t nvmeio_trc_cnt;
1370 	uint32_t nvmeio_trc_size;
1371 	uint32_t nvmeio_trc_output_idx;
1372 
1373 	/* T10 DIF error injection */
1374 	uint32_t lpfc_injerr_wgrd_cnt;
1375 	uint32_t lpfc_injerr_wapp_cnt;
1376 	uint32_t lpfc_injerr_wref_cnt;
1377 	uint32_t lpfc_injerr_rgrd_cnt;
1378 	uint32_t lpfc_injerr_rapp_cnt;
1379 	uint32_t lpfc_injerr_rref_cnt;
1380 	uint32_t lpfc_injerr_nportid;
1381 	struct lpfc_name lpfc_injerr_wwpn;
1382 	sector_t lpfc_injerr_lba;
1383 #define LPFC_INJERR_LBA_OFF	(sector_t)(-1)
1384 
1385 	struct dentry *debug_slow_ring_trc;
1386 	struct lpfc_debugfs_trc *slow_ring_trc;
1387 	atomic_t slow_ring_trc_cnt;
1388 	/* iDiag debugfs sub-directory */
1389 	struct dentry *idiag_root;
1390 	struct dentry *idiag_pci_cfg;
1391 	struct dentry *idiag_bar_acc;
1392 	struct dentry *idiag_que_info;
1393 	struct dentry *idiag_que_acc;
1394 	struct dentry *idiag_drb_acc;
1395 	struct dentry *idiag_ctl_acc;
1396 	struct dentry *idiag_mbx_acc;
1397 	struct dentry *idiag_ext_acc;
1398 	uint8_t lpfc_idiag_last_eq;
1399 #endif
1400 	uint16_t nvmeio_trc_on;
1401 
1402 	/* Used for deferred freeing of ELS data buffers */
1403 	struct list_head elsbuf;
1404 	int elsbuf_cnt;
1405 	int elsbuf_prev_cnt;
1406 
1407 	uint8_t temp_sensor_support;
1408 	/* Fields used for heart beat. */
1409 	unsigned long last_completion_time;
1410 	unsigned long skipped_hb;
1411 	struct timer_list hb_tmofunc;
1412 	struct timer_list rrq_tmr;
1413 	enum hba_temp_state over_temp_state;
1414 	/*
1415 	 * Following bit will be set for all buffer tags which are not
1416 	 * associated with any HBQ.
1417 	 */
1418 #define QUE_BUFTAG_BIT  (1<<31)
1419 	uint32_t buffer_tag_count;
1420 	int wait_4_mlo_maint_flg;
1421 	wait_queue_head_t wait_4_mlo_m_q;
1422 	/* data structure used for latency data collection */
1423 #define LPFC_NO_BUCKET	   0
1424 #define LPFC_LINEAR_BUCKET 1
1425 #define LPFC_POWER2_BUCKET 2
1426 	uint8_t  bucket_type;
1427 	uint32_t bucket_base;
1428 	uint32_t bucket_step;
1429 
1430 /* Maximum number of events that can be outstanding at any time*/
1431 #define LPFC_MAX_EVT_COUNT 512
1432 	atomic_t fast_event_count;
1433 	uint32_t fcoe_eventtag;
1434 	uint32_t fcoe_eventtag_at_fcf_scan;
1435 	uint32_t fcoe_cvl_eventtag;
1436 	uint32_t fcoe_cvl_eventtag_attn;
1437 	struct lpfc_fcf fcf;
1438 	uint8_t fc_map[3];
1439 	uint8_t valid_vlan;
1440 	uint16_t vlan_id;
1441 	struct list_head fcf_conn_rec_list;
1442 
1443 	bool defer_flogi_acc_flag;
1444 	uint16_t defer_flogi_acc_rx_id;
1445 	uint16_t defer_flogi_acc_ox_id;
1446 
1447 	spinlock_t ct_ev_lock; /* synchronize access to ct_ev_waiters */
1448 	struct list_head ct_ev_waiters;
1449 	struct unsol_rcv_ct_ctx ct_ctx[LPFC_CT_CTX_MAX];
1450 	uint32_t ctx_idx;
1451 	struct timer_list inactive_vmid_poll;
1452 
1453 	/* RAS Support */
1454 	struct lpfc_ras_fwlog ras_fwlog;
1455 
1456 	uint8_t menlo_flag;	/* menlo generic flags */
1457 #define HBA_MENLO_SUPPORT	0x1 /* HBA supports menlo commands */
1458 	uint32_t iocb_cnt;
1459 	uint32_t iocb_max;
1460 	atomic_t sdev_cnt;
1461 	spinlock_t devicelock;	/* lock for luns list */
1462 	mempool_t *device_data_mem_pool;
1463 	struct list_head luns;
1464 #define LPFC_TRANSGRESSION_HIGH_TEMPERATURE	0x0080
1465 #define LPFC_TRANSGRESSION_LOW_TEMPERATURE	0x0040
1466 #define LPFC_TRANSGRESSION_HIGH_VOLTAGE		0x0020
1467 #define LPFC_TRANSGRESSION_LOW_VOLTAGE		0x0010
1468 #define LPFC_TRANSGRESSION_HIGH_TXBIAS		0x0008
1469 #define LPFC_TRANSGRESSION_LOW_TXBIAS		0x0004
1470 #define LPFC_TRANSGRESSION_HIGH_TXPOWER		0x0002
1471 #define LPFC_TRANSGRESSION_LOW_TXPOWER		0x0001
1472 #define LPFC_TRANSGRESSION_HIGH_RXPOWER		0x8000
1473 #define LPFC_TRANSGRESSION_LOW_RXPOWER		0x4000
1474 	uint16_t sfp_alarm;
1475 	uint16_t sfp_warning;
1476 
1477 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1478 	uint16_t hdwqstat_on;
1479 #define LPFC_CHECK_OFF		0
1480 #define LPFC_CHECK_NVME_IO	1
1481 #define LPFC_CHECK_NVMET_IO	2
1482 #define LPFC_CHECK_SCSI_IO	4
1483 	uint16_t ktime_on;
1484 	uint64_t ktime_data_samples;
1485 	uint64_t ktime_status_samples;
1486 	uint64_t ktime_last_cmd;
1487 	uint64_t ktime_seg1_total;
1488 	uint64_t ktime_seg1_min;
1489 	uint64_t ktime_seg1_max;
1490 	uint64_t ktime_seg2_total;
1491 	uint64_t ktime_seg2_min;
1492 	uint64_t ktime_seg2_max;
1493 	uint64_t ktime_seg3_total;
1494 	uint64_t ktime_seg3_min;
1495 	uint64_t ktime_seg3_max;
1496 	uint64_t ktime_seg4_total;
1497 	uint64_t ktime_seg4_min;
1498 	uint64_t ktime_seg4_max;
1499 	uint64_t ktime_seg5_total;
1500 	uint64_t ktime_seg5_min;
1501 	uint64_t ktime_seg5_max;
1502 	uint64_t ktime_seg6_total;
1503 	uint64_t ktime_seg6_min;
1504 	uint64_t ktime_seg6_max;
1505 	uint64_t ktime_seg7_total;
1506 	uint64_t ktime_seg7_min;
1507 	uint64_t ktime_seg7_max;
1508 	uint64_t ktime_seg8_total;
1509 	uint64_t ktime_seg8_min;
1510 	uint64_t ktime_seg8_max;
1511 	uint64_t ktime_seg9_total;
1512 	uint64_t ktime_seg9_min;
1513 	uint64_t ktime_seg9_max;
1514 	uint64_t ktime_seg10_total;
1515 	uint64_t ktime_seg10_min;
1516 	uint64_t ktime_seg10_max;
1517 #endif
1518 	/* CMF objects */
1519 	struct lpfc_cgn_stat __percpu *cmf_stat;
1520 	uint32_t cmf_interval_rate;  /* timer interval limit in ms */
1521 	uint32_t cmf_timer_cnt;
1522 #define LPFC_CMF_INTERVAL 90
1523 	uint64_t cmf_link_byte_count;
1524 	uint64_t cmf_max_line_rate;
1525 	uint64_t cmf_max_bytes_per_interval;
1526 	uint64_t cmf_last_sync_bw;
1527 #define  LPFC_CMF_BLK_SIZE 512
1528 	struct hrtimer cmf_timer;
1529 	atomic_t cmf_bw_wait;
1530 	atomic_t cmf_busy;
1531 	atomic_t cmf_stop_io;      /* To block request and stop IO's */
1532 	uint32_t cmf_active_mode;
1533 	uint32_t cmf_info_per_interval;
1534 #define LPFC_MAX_CMF_INFO 32
1535 	struct timespec64 cmf_latency;  /* Interval congestion timestamp */
1536 	uint32_t cmf_last_ts;   /* Interval congestion time (ms) */
1537 	uint32_t cmf_active_info;
1538 
1539 	/* Signal / FPIN handling for Congestion Mgmt */
1540 	u8 cgn_reg_fpin;           /* Negotiated value from RDF */
1541 	u8 cgn_init_reg_fpin;      /* Initial value from READ_CONFIG */
1542 #define LPFC_CGN_FPIN_NONE	0x0
1543 #define LPFC_CGN_FPIN_WARN	0x1
1544 #define LPFC_CGN_FPIN_ALARM	0x2
1545 #define LPFC_CGN_FPIN_BOTH	(LPFC_CGN_FPIN_WARN | LPFC_CGN_FPIN_ALARM)
1546 
1547 	u8 cgn_reg_signal;          /* Negotiated value from EDC */
1548 	u8 cgn_init_reg_signal;     /* Initial value from READ_CONFIG */
1549 		/* cgn_reg_signal and cgn_init_reg_signal use
1550 		 * enum fc_edc_cg_signal_cap_types
1551 		 */
1552 	u16 cgn_fpin_frequency;
1553 #define LPFC_FPIN_INIT_FREQ	0xffff
1554 	u32 cgn_sig_freq;
1555 	u32 cgn_acqe_cnt;
1556 
1557 	/* RX monitor handling for CMF */
1558 	struct rxtable_entry *rxtable;  /* RX_monitor information */
1559 	atomic_t rxtable_idx_head;
1560 #define LPFC_RXMONITOR_TABLE_IN_USE     (LPFC_MAX_RXMONITOR_ENTRY + 73)
1561 	atomic_t rxtable_idx_tail;
1562 	atomic_t rx_max_read_cnt;       /* Maximum read bytes */
1563 	uint64_t rx_block_cnt;
1564 
1565 	/* Congestion parameters from flash */
1566 	struct lpfc_cgn_param cgn_p;
1567 
1568 	/* Statistics counter for ACQE cgn alarms and warnings */
1569 	struct lpfc_cgn_acqe_stat cgn_acqe_stat;
1570 
1571 	/* Congestion buffer information */
1572 	struct lpfc_dmabuf *cgn_i;      /* Congestion Info buffer */
1573 	atomic_t cgn_fabric_warn_cnt;   /* Total warning cgn events for info */
1574 	atomic_t cgn_fabric_alarm_cnt;  /* Total alarm cgn events for info */
1575 	atomic_t cgn_sync_warn_cnt;     /* Total warning events for SYNC wqe */
1576 	atomic_t cgn_sync_alarm_cnt;    /* Total alarm events for SYNC wqe */
1577 	atomic_t cgn_driver_evt_cnt;    /* Total driver cgn events for fmw */
1578 	atomic_t cgn_latency_evt_cnt;
1579 	struct timespec64 cgn_daily_ts;
1580 	atomic64_t cgn_latency_evt;     /* Avg latency per minute */
1581 	unsigned long cgn_evt_timestamp;
1582 #define LPFC_CGN_TIMER_TO_MIN   60000 /* ms in a minute */
1583 	uint32_t cgn_evt_minute;
1584 #define LPFC_SEC_MIN		60
1585 #define LPFC_MIN_HOUR		60
1586 #define LPFC_HOUR_DAY		24
1587 #define LPFC_MIN_DAY		(LPFC_MIN_HOUR * LPFC_HOUR_DAY)
1588 
1589 	struct hlist_node cpuhp;	/* used for cpuhp per hba callback */
1590 	struct timer_list cpuhp_poll_timer;
1591 	struct list_head poll_list;	/* slowpath eq polling list */
1592 #define LPFC_POLL_HB	1		/* slowpath heartbeat */
1593 #define LPFC_POLL_FASTPATH	0	/* called from fastpath */
1594 #define LPFC_POLL_SLOWPATH	1	/* called from slowpath */
1595 
1596 	char os_host_name[MAXHOSTNAMELEN];
1597 
1598 	/* SCSI host template information - for physical port */
1599 	struct scsi_host_template port_template;
1600 	/* SCSI host template information - for all vports */
1601 	struct scsi_host_template vport_template;
1602 	atomic_t dbg_log_idx;
1603 	atomic_t dbg_log_cnt;
1604 	atomic_t dbg_log_dmping;
1605 	struct dbg_log_ent dbg_log[DBG_LOG_SZ];
1606 };
1607 
1608 #define LPFC_MAX_RXMONITOR_ENTRY	800
1609 #define LPFC_MAX_RXMONITOR_DUMP		32
1610 struct rxtable_entry {
1611 	uint64_t cmf_bytes;	/* Total no of read bytes for CMF_SYNC_WQE */
1612 	uint64_t total_bytes;   /* Total no of read bytes requested */
1613 	uint64_t rcv_bytes;     /* Total no of read bytes completed */
1614 	uint64_t avg_io_size;
1615 	uint64_t avg_io_latency;/* Average io latency in microseconds */
1616 	uint64_t max_read_cnt;  /* Maximum read bytes */
1617 	uint64_t max_bytes_per_interval;
1618 	uint32_t cmf_busy;
1619 	uint32_t cmf_info;      /* CMF_SYNC_WQE info */
1620 	uint32_t io_cnt;
1621 	uint32_t timer_utilization;
1622 	uint32_t timer_interval;
1623 };
1624 
1625 static inline struct Scsi_Host *
1626 lpfc_shost_from_vport(struct lpfc_vport *vport)
1627 {
1628 	return container_of((void *) vport, struct Scsi_Host, hostdata[0]);
1629 }
1630 
1631 static inline void
1632 lpfc_set_loopback_flag(struct lpfc_hba *phba)
1633 {
1634 	if (phba->cfg_topology == FLAGS_LOCAL_LB)
1635 		phba->link_flag |= LS_LOOPBACK_MODE;
1636 	else
1637 		phba->link_flag &= ~LS_LOOPBACK_MODE;
1638 }
1639 
1640 static inline int
1641 lpfc_is_link_up(struct lpfc_hba *phba)
1642 {
1643 	return  phba->link_state == LPFC_LINK_UP ||
1644 		phba->link_state == LPFC_CLEAR_LA ||
1645 		phba->link_state == LPFC_HBA_READY;
1646 }
1647 
1648 static inline void
1649 lpfc_worker_wake_up(struct lpfc_hba *phba)
1650 {
1651 	/* Set the lpfc data pending flag */
1652 	set_bit(LPFC_DATA_READY, &phba->data_flags);
1653 
1654 	/* Wake up worker thread */
1655 	wake_up(&phba->work_waitq);
1656 	return;
1657 }
1658 
1659 static inline int
1660 lpfc_readl(void __iomem *addr, uint32_t *data)
1661 {
1662 	uint32_t temp;
1663 	temp = readl(addr);
1664 	if (temp == 0xffffffff)
1665 		return -EIO;
1666 	*data = temp;
1667 	return 0;
1668 }
1669 
1670 static inline int
1671 lpfc_sli_read_hs(struct lpfc_hba *phba)
1672 {
1673 	/*
1674 	 * There was a link/board error. Read the status register to retrieve
1675 	 * the error event and process it.
1676 	 */
1677 	phba->sli.slistat.err_attn_event++;
1678 
1679 	/* Save status info and check for unplug error */
1680 	if (lpfc_readl(phba->HSregaddr, &phba->work_hs) ||
1681 		lpfc_readl(phba->MBslimaddr + 0xa8, &phba->work_status[0]) ||
1682 		lpfc_readl(phba->MBslimaddr + 0xac, &phba->work_status[1])) {
1683 		return -EIO;
1684 	}
1685 
1686 	/* Clear chip Host Attention error bit */
1687 	writel(HA_ERATT, phba->HAregaddr);
1688 	readl(phba->HAregaddr); /* flush */
1689 	phba->pport->stopped = 1;
1690 
1691 	return 0;
1692 }
1693 
1694 static inline struct lpfc_sli_ring *
1695 lpfc_phba_elsring(struct lpfc_hba *phba)
1696 {
1697 	/* Return NULL if sli_rev has become invalid due to bad fw */
1698 	if (phba->sli_rev != LPFC_SLI_REV4  &&
1699 	    phba->sli_rev != LPFC_SLI_REV3  &&
1700 	    phba->sli_rev != LPFC_SLI_REV2)
1701 		return NULL;
1702 
1703 	if (phba->sli_rev == LPFC_SLI_REV4) {
1704 		if (phba->sli4_hba.els_wq)
1705 			return phba->sli4_hba.els_wq->pring;
1706 		else
1707 			return NULL;
1708 	}
1709 	return &phba->sli.sli3_ring[LPFC_ELS_RING];
1710 }
1711 
1712 /**
1713  * lpfc_next_online_cpu - Finds next online CPU on cpumask
1714  * @mask: Pointer to phba's cpumask member.
1715  * @start: starting cpu index
1716  *
1717  * Note: If no valid cpu found, then nr_cpu_ids is returned.
1718  *
1719  **/
1720 static inline unsigned int
1721 lpfc_next_online_cpu(const struct cpumask *mask, unsigned int start)
1722 {
1723 	unsigned int cpu_it;
1724 
1725 	for_each_cpu_wrap(cpu_it, mask, start) {
1726 		if (cpu_online(cpu_it))
1727 			break;
1728 	}
1729 
1730 	return cpu_it;
1731 }
1732 /**
1733  * lpfc_sli4_mod_hba_eq_delay - update EQ delay
1734  * @phba: Pointer to HBA context object.
1735  * @q: The Event Queue to update.
1736  * @delay: The delay value (in us) to be written.
1737  *
1738  **/
1739 static inline void
1740 lpfc_sli4_mod_hba_eq_delay(struct lpfc_hba *phba, struct lpfc_queue *eq,
1741 			   u32 delay)
1742 {
1743 	struct lpfc_register reg_data;
1744 
1745 	reg_data.word0 = 0;
1746 	bf_set(lpfc_sliport_eqdelay_id, &reg_data, eq->queue_id);
1747 	bf_set(lpfc_sliport_eqdelay_delay, &reg_data, delay);
1748 	writel(reg_data.word0, phba->sli4_hba.u.if_type2.EQDregaddr);
1749 	eq->q_mode = delay;
1750 }
1751 
1752 
1753 /*
1754  * Macro that declares tables and a routine to perform enum type to
1755  * ascii string lookup.
1756  *
1757  * Defines a <key,value> table for an enum. Uses xxx_INIT defines for
1758  * the enum to populate the table.  Macro defines a routine (named
1759  * by caller) that will search all elements of the table for the key
1760  * and return the name string if found or "Unrecognized" if not found.
1761  */
1762 #define DECLARE_ENUM2STR_LOOKUP(routine, enum_name, enum_init)		\
1763 static struct {								\
1764 	enum enum_name		value;					\
1765 	char			*name;					\
1766 } fc_##enum_name##_e2str_names[] = enum_init;				\
1767 static const char *routine(enum enum_name table_key)			\
1768 {									\
1769 	int i;								\
1770 	char *name = "Unrecognized";					\
1771 									\
1772 	for (i = 0; i < ARRAY_SIZE(fc_##enum_name##_e2str_names); i++) {\
1773 		if (fc_##enum_name##_e2str_names[i].value == table_key) {\
1774 			name = fc_##enum_name##_e2str_names[i].name;	\
1775 			break;						\
1776 		}							\
1777 	}								\
1778 	return name;							\
1779 }
1780 
1781 /**
1782  * lpfc_is_vmid_enabled - returns if VMID is enabled for either switch types
1783  * @phba: Pointer to HBA context object.
1784  *
1785  * Relationship between the enable, target support and if vmid tag is required
1786  * for the particular combination
1787  * ---------------------------------------------------
1788  * Switch    Enable Flag  Target Support  VMID Needed
1789  * ---------------------------------------------------
1790  * App Id     0              NA              N
1791  * App Id     1               0              N
1792  * App Id     1               1              Y
1793  * Pr Tag     0              NA              N
1794  * Pr Tag     1               0              N
1795  * Pr Tag     1               1              Y
1796  * Pr Tag     2               *              Y
1797  ---------------------------------------------------
1798  *
1799  **/
1800 static inline int lpfc_is_vmid_enabled(struct lpfc_hba *phba)
1801 {
1802 	return phba->cfg_vmid_app_header || phba->cfg_vmid_priority_tagging;
1803 }
1804