1 /* 2 * Support for SATA devices on Serial Attached SCSI (SAS) controllers 3 * 4 * Copyright (C) 2006 IBM Corporation 5 * 6 * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of the 11 * License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 21 * USA 22 */ 23 24 #include <linux/scatterlist.h> 25 #include <linux/slab.h> 26 #include <linux/async.h> 27 #include <linux/export.h> 28 29 #include <scsi/sas_ata.h> 30 #include "sas_internal.h" 31 #include <scsi/scsi_host.h> 32 #include <scsi/scsi_device.h> 33 #include <scsi/scsi_tcq.h> 34 #include <scsi/scsi.h> 35 #include <scsi/scsi_transport.h> 36 #include <scsi/scsi_transport_sas.h> 37 #include "../scsi_sas_internal.h" 38 #include "../scsi_transport_api.h" 39 #include <scsi/scsi_eh.h> 40 41 static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts) 42 { 43 /* Cheesy attempt to translate SAS errors into ATA. Hah! */ 44 45 /* transport error */ 46 if (ts->resp == SAS_TASK_UNDELIVERED) 47 return AC_ERR_ATA_BUS; 48 49 /* ts->resp == SAS_TASK_COMPLETE */ 50 /* task delivered, what happened afterwards? */ 51 switch (ts->stat) { 52 case SAS_DEV_NO_RESPONSE: 53 return AC_ERR_TIMEOUT; 54 55 case SAS_INTERRUPTED: 56 case SAS_PHY_DOWN: 57 case SAS_NAK_R_ERR: 58 return AC_ERR_ATA_BUS; 59 60 61 case SAS_DATA_UNDERRUN: 62 /* 63 * Some programs that use the taskfile interface 64 * (smartctl in particular) can cause underrun 65 * problems. Ignore these errors, perhaps at our 66 * peril. 67 */ 68 return 0; 69 70 case SAS_DATA_OVERRUN: 71 case SAS_QUEUE_FULL: 72 case SAS_DEVICE_UNKNOWN: 73 case SAS_SG_ERR: 74 return AC_ERR_INVALID; 75 76 case SAS_OPEN_TO: 77 case SAS_OPEN_REJECT: 78 SAS_DPRINTK("%s: Saw error %d. What to do?\n", 79 __func__, ts->stat); 80 return AC_ERR_OTHER; 81 82 case SAM_STAT_CHECK_CONDITION: 83 case SAS_ABORTED_TASK: 84 return AC_ERR_DEV; 85 86 case SAS_PROTO_RESPONSE: 87 /* This means the ending_fis has the error 88 * value; return 0 here to collect it */ 89 return 0; 90 default: 91 return 0; 92 } 93 } 94 95 static void sas_ata_task_done(struct sas_task *task) 96 { 97 struct ata_queued_cmd *qc = task->uldd_task; 98 struct domain_device *dev = task->dev; 99 struct task_status_struct *stat = &task->task_status; 100 struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf; 101 struct sas_ha_struct *sas_ha = dev->port->ha; 102 enum ata_completion_errors ac; 103 unsigned long flags; 104 struct ata_link *link; 105 struct ata_port *ap; 106 107 spin_lock_irqsave(&dev->done_lock, flags); 108 if (test_bit(SAS_HA_FROZEN, &sas_ha->state)) 109 task = NULL; 110 else if (qc && qc->scsicmd) 111 ASSIGN_SAS_TASK(qc->scsicmd, NULL); 112 spin_unlock_irqrestore(&dev->done_lock, flags); 113 114 /* check if libsas-eh got to the task before us */ 115 if (unlikely(!task)) 116 return; 117 118 if (!qc) 119 goto qc_already_gone; 120 121 ap = qc->ap; 122 link = &ap->link; 123 124 spin_lock_irqsave(ap->lock, flags); 125 /* check if we lost the race with libata/sas_ata_post_internal() */ 126 if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) { 127 spin_unlock_irqrestore(ap->lock, flags); 128 if (qc->scsicmd) 129 goto qc_already_gone; 130 else { 131 /* if eh is not involved and the port is frozen then the 132 * ata internal abort process has taken responsibility 133 * for this sas_task 134 */ 135 return; 136 } 137 } 138 139 if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD || 140 ((stat->stat == SAM_STAT_CHECK_CONDITION && 141 dev->sata_dev.class == ATA_DEV_ATAPI))) { 142 memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE); 143 144 if (!link->sactive) { 145 qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]); 146 } else { 147 link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]); 148 if (unlikely(link->eh_info.err_mask)) 149 qc->flags |= ATA_QCFLAG_FAILED; 150 } 151 } else { 152 ac = sas_to_ata_err(stat); 153 if (ac) { 154 SAS_DPRINTK("%s: SAS error %x\n", __func__, 155 stat->stat); 156 /* We saw a SAS error. Send a vague error. */ 157 if (!link->sactive) { 158 qc->err_mask = ac; 159 } else { 160 link->eh_info.err_mask |= AC_ERR_DEV; 161 qc->flags |= ATA_QCFLAG_FAILED; 162 } 163 164 dev->sata_dev.fis[3] = 0x04; /* status err */ 165 dev->sata_dev.fis[2] = ATA_ERR; 166 } 167 } 168 169 qc->lldd_task = NULL; 170 ata_qc_complete(qc); 171 spin_unlock_irqrestore(ap->lock, flags); 172 173 qc_already_gone: 174 sas_free_task(task); 175 } 176 177 static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) 178 { 179 unsigned long flags; 180 struct sas_task *task; 181 struct scatterlist *sg; 182 int ret = AC_ERR_SYSTEM; 183 unsigned int si, xfer = 0; 184 struct ata_port *ap = qc->ap; 185 struct domain_device *dev = ap->private_data; 186 struct sas_ha_struct *sas_ha = dev->port->ha; 187 struct Scsi_Host *host = sas_ha->core.shost; 188 struct sas_internal *i = to_sas_internal(host->transportt); 189 190 /* TODO: audit callers to ensure they are ready for qc_issue to 191 * unconditionally re-enable interrupts 192 */ 193 local_irq_save(flags); 194 spin_unlock(ap->lock); 195 196 /* If the device fell off, no sense in issuing commands */ 197 if (test_bit(SAS_DEV_GONE, &dev->state)) 198 goto out; 199 200 task = sas_alloc_task(GFP_ATOMIC); 201 if (!task) 202 goto out; 203 task->dev = dev; 204 task->task_proto = SAS_PROTOCOL_STP; 205 task->task_done = sas_ata_task_done; 206 207 if (qc->tf.command == ATA_CMD_FPDMA_WRITE || 208 qc->tf.command == ATA_CMD_FPDMA_READ || 209 qc->tf.command == ATA_CMD_FPDMA_RECV || 210 qc->tf.command == ATA_CMD_FPDMA_SEND || 211 qc->tf.command == ATA_CMD_NCQ_NON_DATA) { 212 /* Need to zero out the tag libata assigned us */ 213 qc->tf.nsect = 0; 214 } 215 216 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis); 217 task->uldd_task = qc; 218 if (ata_is_atapi(qc->tf.protocol)) { 219 memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); 220 task->total_xfer_len = qc->nbytes; 221 task->num_scatter = qc->n_elem; 222 } else { 223 for_each_sg(qc->sg, sg, qc->n_elem, si) 224 xfer += sg->length; 225 226 task->total_xfer_len = xfer; 227 task->num_scatter = si; 228 } 229 230 task->data_dir = qc->dma_dir; 231 task->scatter = qc->sg; 232 task->ata_task.retry_count = 1; 233 task->task_state_flags = SAS_TASK_STATE_PENDING; 234 qc->lldd_task = task; 235 236 task->ata_task.use_ncq = ata_is_ncq(qc->tf.protocol); 237 task->ata_task.dma_xfer = ata_is_dma(qc->tf.protocol); 238 239 if (qc->scsicmd) 240 ASSIGN_SAS_TASK(qc->scsicmd, task); 241 242 ret = i->dft->lldd_execute_task(task, GFP_ATOMIC); 243 if (ret) { 244 SAS_DPRINTK("lldd_execute_task returned: %d\n", ret); 245 246 if (qc->scsicmd) 247 ASSIGN_SAS_TASK(qc->scsicmd, NULL); 248 sas_free_task(task); 249 qc->lldd_task = NULL; 250 ret = AC_ERR_SYSTEM; 251 } 252 253 out: 254 spin_lock(ap->lock); 255 local_irq_restore(flags); 256 return ret; 257 } 258 259 static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc) 260 { 261 struct domain_device *dev = qc->ap->private_data; 262 263 ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf); 264 return true; 265 } 266 267 static struct sas_internal *dev_to_sas_internal(struct domain_device *dev) 268 { 269 return to_sas_internal(dev->port->ha->core.shost->transportt); 270 } 271 272 static int sas_get_ata_command_set(struct domain_device *dev); 273 274 int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy) 275 { 276 if (phy->attached_tproto & SAS_PROTOCOL_STP) 277 dev->tproto = phy->attached_tproto; 278 if (phy->attached_sata_dev) 279 dev->tproto |= SAS_SATA_DEV; 280 281 if (phy->attached_dev_type == SAS_SATA_PENDING) 282 dev->dev_type = SAS_SATA_PENDING; 283 else { 284 int res; 285 286 dev->dev_type = SAS_SATA_DEV; 287 res = sas_get_report_phy_sata(dev->parent, phy->phy_id, 288 &dev->sata_dev.rps_resp); 289 if (res) { 290 SAS_DPRINTK("report phy sata to %016llx:0x%x returned " 291 "0x%x\n", SAS_ADDR(dev->parent->sas_addr), 292 phy->phy_id, res); 293 return res; 294 } 295 memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis, 296 sizeof(struct dev_to_host_fis)); 297 dev->sata_dev.class = sas_get_ata_command_set(dev); 298 } 299 return 0; 300 } 301 302 static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy) 303 { 304 int res; 305 306 /* we weren't pending, so successfully end the reset sequence now */ 307 if (dev->dev_type != SAS_SATA_PENDING) 308 return 1; 309 310 /* hmmm, if this succeeds do we need to repost the domain_device to the 311 * lldd so it can pick up new parameters? 312 */ 313 res = sas_get_ata_info(dev, phy); 314 if (res) 315 return 0; /* retry */ 316 else 317 return 1; 318 } 319 320 static int smp_ata_check_ready(struct ata_link *link) 321 { 322 int res; 323 struct ata_port *ap = link->ap; 324 struct domain_device *dev = ap->private_data; 325 struct domain_device *ex_dev = dev->parent; 326 struct sas_phy *phy = sas_get_local_phy(dev); 327 struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number]; 328 329 res = sas_ex_phy_discover(ex_dev, phy->number); 330 sas_put_local_phy(phy); 331 332 /* break the wait early if the expander is unreachable, 333 * otherwise keep polling 334 */ 335 if (res == -ECOMM) 336 return res; 337 if (res != SMP_RESP_FUNC_ACC) 338 return 0; 339 340 switch (ex_phy->attached_dev_type) { 341 case SAS_SATA_PENDING: 342 return 0; 343 case SAS_END_DEVICE: 344 if (ex_phy->attached_sata_dev) 345 return sas_ata_clear_pending(dev, ex_phy); 346 default: 347 return -ENODEV; 348 } 349 } 350 351 static int local_ata_check_ready(struct ata_link *link) 352 { 353 struct ata_port *ap = link->ap; 354 struct domain_device *dev = ap->private_data; 355 struct sas_internal *i = dev_to_sas_internal(dev); 356 357 if (i->dft->lldd_ata_check_ready) 358 return i->dft->lldd_ata_check_ready(dev); 359 else { 360 /* lldd's that don't implement 'ready' checking get the 361 * old default behavior of not coordinating reset 362 * recovery with libata 363 */ 364 return 1; 365 } 366 } 367 368 static int sas_ata_printk(const char *level, const struct domain_device *ddev, 369 const char *fmt, ...) 370 { 371 struct ata_port *ap = ddev->sata_dev.ap; 372 struct device *dev = &ddev->rphy->dev; 373 struct va_format vaf; 374 va_list args; 375 int r; 376 377 va_start(args, fmt); 378 379 vaf.fmt = fmt; 380 vaf.va = &args; 381 382 r = printk("%ssas: ata%u: %s: %pV", 383 level, ap->print_id, dev_name(dev), &vaf); 384 385 va_end(args); 386 387 return r; 388 } 389 390 static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, 391 unsigned long deadline) 392 { 393 int ret = 0, res; 394 struct sas_phy *phy; 395 struct ata_port *ap = link->ap; 396 int (*check_ready)(struct ata_link *link); 397 struct domain_device *dev = ap->private_data; 398 struct sas_internal *i = dev_to_sas_internal(dev); 399 400 res = i->dft->lldd_I_T_nexus_reset(dev); 401 if (res == -ENODEV) 402 return res; 403 404 if (res != TMF_RESP_FUNC_COMPLETE) 405 sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n"); 406 407 phy = sas_get_local_phy(dev); 408 if (scsi_is_sas_phy_local(phy)) 409 check_ready = local_ata_check_ready; 410 else 411 check_ready = smp_ata_check_ready; 412 sas_put_local_phy(phy); 413 414 ret = ata_wait_after_reset(link, deadline, check_ready); 415 if (ret && ret != -EAGAIN) 416 sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret); 417 418 *class = dev->sata_dev.class; 419 420 ap->cbl = ATA_CBL_SATA; 421 return ret; 422 } 423 424 /* 425 * notify the lldd to forget the sas_task for this internal ata command 426 * that bypasses scsi-eh 427 */ 428 static void sas_ata_internal_abort(struct sas_task *task) 429 { 430 struct sas_internal *si = dev_to_sas_internal(task->dev); 431 unsigned long flags; 432 int res; 433 434 spin_lock_irqsave(&task->task_state_lock, flags); 435 if (task->task_state_flags & SAS_TASK_STATE_ABORTED || 436 task->task_state_flags & SAS_TASK_STATE_DONE) { 437 spin_unlock_irqrestore(&task->task_state_lock, flags); 438 SAS_DPRINTK("%s: Task %p already finished.\n", __func__, 439 task); 440 goto out; 441 } 442 task->task_state_flags |= SAS_TASK_STATE_ABORTED; 443 spin_unlock_irqrestore(&task->task_state_lock, flags); 444 445 res = si->dft->lldd_abort_task(task); 446 447 spin_lock_irqsave(&task->task_state_lock, flags); 448 if (task->task_state_flags & SAS_TASK_STATE_DONE || 449 res == TMF_RESP_FUNC_COMPLETE) { 450 spin_unlock_irqrestore(&task->task_state_lock, flags); 451 goto out; 452 } 453 454 /* XXX we are not prepared to deal with ->lldd_abort_task() 455 * failures. TODO: lldds need to unconditionally forget about 456 * aborted ata tasks, otherwise we (likely) leak the sas task 457 * here 458 */ 459 SAS_DPRINTK("%s: Task %p leaked.\n", __func__, task); 460 461 if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) 462 task->task_state_flags &= ~SAS_TASK_STATE_ABORTED; 463 spin_unlock_irqrestore(&task->task_state_lock, flags); 464 465 return; 466 out: 467 sas_free_task(task); 468 } 469 470 static void sas_ata_post_internal(struct ata_queued_cmd *qc) 471 { 472 if (qc->flags & ATA_QCFLAG_FAILED) 473 qc->err_mask |= AC_ERR_OTHER; 474 475 if (qc->err_mask) { 476 /* 477 * Find the sas_task and kill it. By this point, libata 478 * has decided to kill the qc and has frozen the port. 479 * In this state sas_ata_task_done() will no longer free 480 * the sas_task, so we need to notify the lldd (via 481 * ->lldd_abort_task) that the task is dead and free it 482 * ourselves. 483 */ 484 struct sas_task *task = qc->lldd_task; 485 486 qc->lldd_task = NULL; 487 if (!task) 488 return; 489 task->uldd_task = NULL; 490 sas_ata_internal_abort(task); 491 } 492 } 493 494 495 static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev) 496 { 497 struct domain_device *dev = ap->private_data; 498 struct sas_internal *i = dev_to_sas_internal(dev); 499 500 if (i->dft->lldd_ata_set_dmamode) 501 i->dft->lldd_ata_set_dmamode(dev); 502 } 503 504 static void sas_ata_sched_eh(struct ata_port *ap) 505 { 506 struct domain_device *dev = ap->private_data; 507 struct sas_ha_struct *ha = dev->port->ha; 508 unsigned long flags; 509 510 spin_lock_irqsave(&ha->lock, flags); 511 if (!test_and_set_bit(SAS_DEV_EH_PENDING, &dev->state)) 512 ha->eh_active++; 513 ata_std_sched_eh(ap); 514 spin_unlock_irqrestore(&ha->lock, flags); 515 } 516 517 void sas_ata_end_eh(struct ata_port *ap) 518 { 519 struct domain_device *dev = ap->private_data; 520 struct sas_ha_struct *ha = dev->port->ha; 521 unsigned long flags; 522 523 spin_lock_irqsave(&ha->lock, flags); 524 if (test_and_clear_bit(SAS_DEV_EH_PENDING, &dev->state)) 525 ha->eh_active--; 526 spin_unlock_irqrestore(&ha->lock, flags); 527 } 528 529 static struct ata_port_operations sas_sata_ops = { 530 .prereset = ata_std_prereset, 531 .hardreset = sas_ata_hard_reset, 532 .postreset = ata_std_postreset, 533 .error_handler = ata_std_error_handler, 534 .post_internal_cmd = sas_ata_post_internal, 535 .qc_defer = ata_std_qc_defer, 536 .qc_prep = ata_noop_qc_prep, 537 .qc_issue = sas_ata_qc_issue, 538 .qc_fill_rtf = sas_ata_qc_fill_rtf, 539 .port_start = ata_sas_port_start, 540 .port_stop = ata_sas_port_stop, 541 .set_dmamode = sas_ata_set_dmamode, 542 .sched_eh = sas_ata_sched_eh, 543 .end_eh = sas_ata_end_eh, 544 }; 545 546 static struct ata_port_info sata_port_info = { 547 .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ | 548 ATA_FLAG_SAS_HOST | ATA_FLAG_FPDMA_AUX, 549 .pio_mask = ATA_PIO4, 550 .mwdma_mask = ATA_MWDMA2, 551 .udma_mask = ATA_UDMA6, 552 .port_ops = &sas_sata_ops 553 }; 554 555 int sas_ata_init(struct domain_device *found_dev) 556 { 557 struct sas_ha_struct *ha = found_dev->port->ha; 558 struct Scsi_Host *shost = ha->core.shost; 559 struct ata_port *ap; 560 int rc; 561 562 ata_host_init(&found_dev->sata_dev.ata_host, ha->dev, &sas_sata_ops); 563 ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host, 564 &sata_port_info, 565 shost); 566 if (!ap) { 567 SAS_DPRINTK("ata_sas_port_alloc failed.\n"); 568 return -ENODEV; 569 } 570 571 ap->private_data = found_dev; 572 ap->cbl = ATA_CBL_SATA; 573 ap->scsi_host = shost; 574 rc = ata_sas_port_init(ap); 575 if (rc) { 576 ata_sas_port_destroy(ap); 577 return rc; 578 } 579 found_dev->sata_dev.ap = ap; 580 581 return 0; 582 } 583 584 void sas_ata_task_abort(struct sas_task *task) 585 { 586 struct ata_queued_cmd *qc = task->uldd_task; 587 struct completion *waiting; 588 589 /* Bounce SCSI-initiated commands to the SCSI EH */ 590 if (qc->scsicmd) { 591 struct request_queue *q = qc->scsicmd->device->request_queue; 592 unsigned long flags; 593 594 spin_lock_irqsave(q->queue_lock, flags); 595 blk_abort_request(qc->scsicmd->request); 596 spin_unlock_irqrestore(q->queue_lock, flags); 597 return; 598 } 599 600 /* Internal command, fake a timeout and complete. */ 601 qc->flags &= ~ATA_QCFLAG_ACTIVE; 602 qc->flags |= ATA_QCFLAG_FAILED; 603 qc->err_mask |= AC_ERR_TIMEOUT; 604 waiting = qc->private_data; 605 complete(waiting); 606 } 607 608 static int sas_get_ata_command_set(struct domain_device *dev) 609 { 610 struct dev_to_host_fis *fis = 611 (struct dev_to_host_fis *) dev->frame_rcvd; 612 struct ata_taskfile tf; 613 614 if (dev->dev_type == SAS_SATA_PENDING) 615 return ATA_DEV_UNKNOWN; 616 617 ata_tf_from_fis((const u8 *)fis, &tf); 618 619 return ata_dev_classify(&tf); 620 } 621 622 void sas_probe_sata(struct asd_sas_port *port) 623 { 624 struct domain_device *dev, *n; 625 626 mutex_lock(&port->ha->disco_mutex); 627 list_for_each_entry(dev, &port->disco_list, disco_list_node) { 628 if (!dev_is_sata(dev)) 629 continue; 630 631 ata_sas_async_probe(dev->sata_dev.ap); 632 } 633 mutex_unlock(&port->ha->disco_mutex); 634 635 list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { 636 if (!dev_is_sata(dev)) 637 continue; 638 639 sas_ata_wait_eh(dev); 640 641 /* if libata could not bring the link up, don't surface 642 * the device 643 */ 644 if (ata_dev_disabled(sas_to_ata_dev(dev))) 645 sas_fail_probe(dev, __func__, -ENODEV); 646 } 647 648 } 649 650 static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func) 651 { 652 struct domain_device *dev, *n; 653 654 list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) { 655 if (!dev_is_sata(dev)) 656 continue; 657 658 sas_ata_wait_eh(dev); 659 660 /* if libata failed to power manage the device, tear it down */ 661 if (ata_dev_disabled(sas_to_ata_dev(dev))) 662 sas_fail_probe(dev, func, -ENODEV); 663 } 664 } 665 666 void sas_suspend_sata(struct asd_sas_port *port) 667 { 668 struct domain_device *dev; 669 670 mutex_lock(&port->ha->disco_mutex); 671 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 672 struct sata_device *sata; 673 674 if (!dev_is_sata(dev)) 675 continue; 676 677 sata = &dev->sata_dev; 678 if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND) 679 continue; 680 681 ata_sas_port_suspend(sata->ap); 682 } 683 mutex_unlock(&port->ha->disco_mutex); 684 685 sas_ata_flush_pm_eh(port, __func__); 686 } 687 688 void sas_resume_sata(struct asd_sas_port *port) 689 { 690 struct domain_device *dev; 691 692 mutex_lock(&port->ha->disco_mutex); 693 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 694 struct sata_device *sata; 695 696 if (!dev_is_sata(dev)) 697 continue; 698 699 sata = &dev->sata_dev; 700 if (sata->ap->pm_mesg.event == PM_EVENT_ON) 701 continue; 702 703 ata_sas_port_resume(sata->ap); 704 } 705 mutex_unlock(&port->ha->disco_mutex); 706 707 sas_ata_flush_pm_eh(port, __func__); 708 } 709 710 /** 711 * sas_discover_sata -- discover an STP/SATA domain device 712 * @dev: pointer to struct domain_device of interest 713 * 714 * Devices directly attached to a HA port, have no parents. All other 715 * devices do, and should have their "parent" pointer set appropriately 716 * before calling this function. 717 */ 718 int sas_discover_sata(struct domain_device *dev) 719 { 720 int res; 721 722 if (dev->dev_type == SAS_SATA_PM) 723 return -ENODEV; 724 725 dev->sata_dev.class = sas_get_ata_command_set(dev); 726 sas_fill_in_rphy(dev, dev->rphy); 727 728 res = sas_notify_lldd_dev_found(dev); 729 if (res) 730 return res; 731 732 sas_discover_event(dev->port, DISCE_PROBE); 733 return 0; 734 } 735 736 static void async_sas_ata_eh(void *data, async_cookie_t cookie) 737 { 738 struct domain_device *dev = data; 739 struct ata_port *ap = dev->sata_dev.ap; 740 struct sas_ha_struct *ha = dev->port->ha; 741 742 sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n"); 743 ata_scsi_port_error_handler(ha->core.shost, ap); 744 sas_put_device(dev); 745 } 746 747 void sas_ata_strategy_handler(struct Scsi_Host *shost) 748 { 749 struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); 750 ASYNC_DOMAIN_EXCLUSIVE(async); 751 int i; 752 753 /* it's ok to defer revalidation events during ata eh, these 754 * disks are in one of three states: 755 * 1/ present for initial domain discovery, and these 756 * resets will cause bcn flutters 757 * 2/ hot removed, we'll discover that after eh fails 758 * 3/ hot added after initial discovery, lost the race, and need 759 * to catch the next train. 760 */ 761 sas_disable_revalidation(sas_ha); 762 763 spin_lock_irq(&sas_ha->phy_port_lock); 764 for (i = 0; i < sas_ha->num_phys; i++) { 765 struct asd_sas_port *port = sas_ha->sas_port[i]; 766 struct domain_device *dev; 767 768 spin_lock(&port->dev_list_lock); 769 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 770 if (!dev_is_sata(dev)) 771 continue; 772 773 /* hold a reference over eh since we may be 774 * racing with final remove once all commands 775 * are completed 776 */ 777 kref_get(&dev->kref); 778 779 async_schedule_domain(async_sas_ata_eh, dev, &async); 780 } 781 spin_unlock(&port->dev_list_lock); 782 } 783 spin_unlock_irq(&sas_ha->phy_port_lock); 784 785 async_synchronize_full_domain(&async); 786 787 sas_enable_revalidation(sas_ha); 788 } 789 790 void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, 791 struct list_head *done_q) 792 { 793 struct scsi_cmnd *cmd, *n; 794 struct domain_device *eh_dev; 795 796 do { 797 LIST_HEAD(sata_q); 798 eh_dev = NULL; 799 800 list_for_each_entry_safe(cmd, n, work_q, eh_entry) { 801 struct domain_device *ddev = cmd_to_domain_dev(cmd); 802 803 if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd)) 804 continue; 805 if (eh_dev && eh_dev != ddev) 806 continue; 807 eh_dev = ddev; 808 list_move(&cmd->eh_entry, &sata_q); 809 } 810 811 if (!list_empty(&sata_q)) { 812 struct ata_port *ap = eh_dev->sata_dev.ap; 813 814 sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n"); 815 ata_scsi_cmd_error_handler(shost, ap, &sata_q); 816 /* 817 * ata's error handler may leave the cmd on the list 818 * so make sure they don't remain on a stack list 819 * about to go out of scope. 820 * 821 * This looks strange, since the commands are 822 * now part of no list, but the next error 823 * action will be ata_port_error_handler() 824 * which takes no list and sweeps them up 825 * anyway from the ata tag array. 826 */ 827 while (!list_empty(&sata_q)) 828 list_del_init(sata_q.next); 829 } 830 } while (eh_dev); 831 } 832 833 void sas_ata_schedule_reset(struct domain_device *dev) 834 { 835 struct ata_eh_info *ehi; 836 struct ata_port *ap; 837 unsigned long flags; 838 839 if (!dev_is_sata(dev)) 840 return; 841 842 ap = dev->sata_dev.ap; 843 ehi = &ap->link.eh_info; 844 845 spin_lock_irqsave(ap->lock, flags); 846 ehi->err_mask |= AC_ERR_TIMEOUT; 847 ehi->action |= ATA_EH_RESET; 848 ata_port_schedule_eh(ap); 849 spin_unlock_irqrestore(ap->lock, flags); 850 } 851 EXPORT_SYMBOL_GPL(sas_ata_schedule_reset); 852 853 void sas_ata_wait_eh(struct domain_device *dev) 854 { 855 struct ata_port *ap; 856 857 if (!dev_is_sata(dev)) 858 return; 859 860 ap = dev->sata_dev.ap; 861 ata_port_wait_eh(ap); 862 } 863