1 /* 2 * Support for SATA devices on Serial Attached SCSI (SAS) controllers 3 * 4 * Copyright (C) 2006 IBM Corporation 5 * 6 * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of the 11 * License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 21 * USA 22 */ 23 24 #include <linux/scatterlist.h> 25 #include <linux/slab.h> 26 #include <linux/async.h> 27 #include <linux/export.h> 28 29 #include <scsi/sas_ata.h> 30 #include "sas_internal.h" 31 #include <scsi/scsi_host.h> 32 #include <scsi/scsi_device.h> 33 #include <scsi/scsi_tcq.h> 34 #include <scsi/scsi.h> 35 #include <scsi/scsi_transport.h> 36 #include <scsi/scsi_transport_sas.h> 37 #include "../scsi_sas_internal.h" 38 #include "../scsi_transport_api.h" 39 #include <scsi/scsi_eh.h> 40 41 static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts) 42 { 43 /* Cheesy attempt to translate SAS errors into ATA. Hah! */ 44 45 /* transport error */ 46 if (ts->resp == SAS_TASK_UNDELIVERED) 47 return AC_ERR_ATA_BUS; 48 49 /* ts->resp == SAS_TASK_COMPLETE */ 50 /* task delivered, what happened afterwards? */ 51 switch (ts->stat) { 52 case SAS_DEV_NO_RESPONSE: 53 return AC_ERR_TIMEOUT; 54 55 case SAS_INTERRUPTED: 56 case SAS_PHY_DOWN: 57 case SAS_NAK_R_ERR: 58 return AC_ERR_ATA_BUS; 59 60 61 case SAS_DATA_UNDERRUN: 62 /* 63 * Some programs that use the taskfile interface 64 * (smartctl in particular) can cause underrun 65 * problems. Ignore these errors, perhaps at our 66 * peril. 67 */ 68 return 0; 69 70 case SAS_DATA_OVERRUN: 71 case SAS_QUEUE_FULL: 72 case SAS_DEVICE_UNKNOWN: 73 case SAS_SG_ERR: 74 return AC_ERR_INVALID; 75 76 case SAS_OPEN_TO: 77 case SAS_OPEN_REJECT: 78 SAS_DPRINTK("%s: Saw error %d. What to do?\n", 79 __func__, ts->stat); 80 return AC_ERR_OTHER; 81 82 case SAM_STAT_CHECK_CONDITION: 83 case SAS_ABORTED_TASK: 84 return AC_ERR_DEV; 85 86 case SAS_PROTO_RESPONSE: 87 /* This means the ending_fis has the error 88 * value; return 0 here to collect it */ 89 return 0; 90 default: 91 return 0; 92 } 93 } 94 95 static void sas_ata_task_done(struct sas_task *task) 96 { 97 struct ata_queued_cmd *qc = task->uldd_task; 98 struct domain_device *dev = task->dev; 99 struct task_status_struct *stat = &task->task_status; 100 struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf; 101 struct sas_ha_struct *sas_ha = dev->port->ha; 102 enum ata_completion_errors ac; 103 unsigned long flags; 104 struct ata_link *link; 105 struct ata_port *ap; 106 107 spin_lock_irqsave(&dev->done_lock, flags); 108 if (test_bit(SAS_HA_FROZEN, &sas_ha->state)) 109 task = NULL; 110 else if (qc && qc->scsicmd) 111 ASSIGN_SAS_TASK(qc->scsicmd, NULL); 112 spin_unlock_irqrestore(&dev->done_lock, flags); 113 114 /* check if libsas-eh got to the task before us */ 115 if (unlikely(!task)) 116 return; 117 118 if (!qc) 119 goto qc_already_gone; 120 121 ap = qc->ap; 122 link = &ap->link; 123 124 spin_lock_irqsave(ap->lock, flags); 125 /* check if we lost the race with libata/sas_ata_post_internal() */ 126 if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) { 127 spin_unlock_irqrestore(ap->lock, flags); 128 if (qc->scsicmd) 129 goto qc_already_gone; 130 else { 131 /* if eh is not involved and the port is frozen then the 132 * ata internal abort process has taken responsibility 133 * for this sas_task 134 */ 135 return; 136 } 137 } 138 139 if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD || 140 ((stat->stat == SAM_STAT_CHECK_CONDITION && 141 dev->sata_dev.class == ATA_DEV_ATAPI))) { 142 memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE); 143 144 if (!link->sactive) { 145 qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]); 146 } else { 147 link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]); 148 if (unlikely(link->eh_info.err_mask)) 149 qc->flags |= ATA_QCFLAG_FAILED; 150 } 151 } else { 152 ac = sas_to_ata_err(stat); 153 if (ac) { 154 SAS_DPRINTK("%s: SAS error %x\n", __func__, 155 stat->stat); 156 /* We saw a SAS error. Send a vague error. */ 157 if (!link->sactive) { 158 qc->err_mask = ac; 159 } else { 160 link->eh_info.err_mask |= AC_ERR_DEV; 161 qc->flags |= ATA_QCFLAG_FAILED; 162 } 163 164 dev->sata_dev.fis[3] = 0x04; /* status err */ 165 dev->sata_dev.fis[2] = ATA_ERR; 166 } 167 } 168 169 qc->lldd_task = NULL; 170 ata_qc_complete(qc); 171 spin_unlock_irqrestore(ap->lock, flags); 172 173 qc_already_gone: 174 sas_free_task(task); 175 } 176 177 static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) 178 { 179 unsigned long flags; 180 struct sas_task *task; 181 struct scatterlist *sg; 182 int ret = AC_ERR_SYSTEM; 183 unsigned int si, xfer = 0; 184 struct ata_port *ap = qc->ap; 185 struct domain_device *dev = ap->private_data; 186 struct sas_ha_struct *sas_ha = dev->port->ha; 187 struct Scsi_Host *host = sas_ha->core.shost; 188 struct sas_internal *i = to_sas_internal(host->transportt); 189 190 /* TODO: audit callers to ensure they are ready for qc_issue to 191 * unconditionally re-enable interrupts 192 */ 193 local_irq_save(flags); 194 spin_unlock(ap->lock); 195 196 /* If the device fell off, no sense in issuing commands */ 197 if (test_bit(SAS_DEV_GONE, &dev->state)) 198 goto out; 199 200 task = sas_alloc_task(GFP_ATOMIC); 201 if (!task) 202 goto out; 203 task->dev = dev; 204 task->task_proto = SAS_PROTOCOL_STP; 205 task->task_done = sas_ata_task_done; 206 207 if (qc->tf.command == ATA_CMD_FPDMA_WRITE || 208 qc->tf.command == ATA_CMD_FPDMA_READ || 209 qc->tf.command == ATA_CMD_FPDMA_RECV || 210 qc->tf.command == ATA_CMD_FPDMA_SEND || 211 qc->tf.command == ATA_CMD_NCQ_NON_DATA) { 212 /* Need to zero out the tag libata assigned us */ 213 qc->tf.nsect = 0; 214 } 215 216 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis); 217 task->uldd_task = qc; 218 if (ata_is_atapi(qc->tf.protocol)) { 219 memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); 220 task->total_xfer_len = qc->nbytes; 221 task->num_scatter = qc->n_elem; 222 } else { 223 for_each_sg(qc->sg, sg, qc->n_elem, si) 224 xfer += sg_dma_len(sg); 225 226 task->total_xfer_len = xfer; 227 task->num_scatter = si; 228 } 229 230 task->data_dir = qc->dma_dir; 231 task->scatter = qc->sg; 232 task->ata_task.retry_count = 1; 233 task->task_state_flags = SAS_TASK_STATE_PENDING; 234 qc->lldd_task = task; 235 236 task->ata_task.use_ncq = ata_is_ncq(qc->tf.protocol); 237 task->ata_task.dma_xfer = ata_is_dma(qc->tf.protocol); 238 239 if (qc->scsicmd) 240 ASSIGN_SAS_TASK(qc->scsicmd, task); 241 242 ret = i->dft->lldd_execute_task(task, GFP_ATOMIC); 243 if (ret) { 244 SAS_DPRINTK("lldd_execute_task returned: %d\n", ret); 245 246 if (qc->scsicmd) 247 ASSIGN_SAS_TASK(qc->scsicmd, NULL); 248 sas_free_task(task); 249 qc->lldd_task = NULL; 250 ret = AC_ERR_SYSTEM; 251 } 252 253 out: 254 spin_lock(ap->lock); 255 local_irq_restore(flags); 256 return ret; 257 } 258 259 static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc) 260 { 261 struct domain_device *dev = qc->ap->private_data; 262 263 ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf); 264 return true; 265 } 266 267 static struct sas_internal *dev_to_sas_internal(struct domain_device *dev) 268 { 269 return to_sas_internal(dev->port->ha->core.shost->transportt); 270 } 271 272 static int sas_get_ata_command_set(struct domain_device *dev); 273 274 int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy) 275 { 276 if (phy->attached_tproto & SAS_PROTOCOL_STP) 277 dev->tproto = phy->attached_tproto; 278 if (phy->attached_sata_dev) 279 dev->tproto |= SAS_SATA_DEV; 280 281 if (phy->attached_dev_type == SAS_SATA_PENDING) 282 dev->dev_type = SAS_SATA_PENDING; 283 else { 284 int res; 285 286 dev->dev_type = SAS_SATA_DEV; 287 res = sas_get_report_phy_sata(dev->parent, phy->phy_id, 288 &dev->sata_dev.rps_resp); 289 if (res) { 290 SAS_DPRINTK("report phy sata to %016llx:0x%x returned " 291 "0x%x\n", SAS_ADDR(dev->parent->sas_addr), 292 phy->phy_id, res); 293 return res; 294 } 295 memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis, 296 sizeof(struct dev_to_host_fis)); 297 dev->sata_dev.class = sas_get_ata_command_set(dev); 298 } 299 return 0; 300 } 301 302 static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy) 303 { 304 int res; 305 306 /* we weren't pending, so successfully end the reset sequence now */ 307 if (dev->dev_type != SAS_SATA_PENDING) 308 return 1; 309 310 /* hmmm, if this succeeds do we need to repost the domain_device to the 311 * lldd so it can pick up new parameters? 312 */ 313 res = sas_get_ata_info(dev, phy); 314 if (res) 315 return 0; /* retry */ 316 else 317 return 1; 318 } 319 320 static int smp_ata_check_ready(struct ata_link *link) 321 { 322 int res; 323 struct ata_port *ap = link->ap; 324 struct domain_device *dev = ap->private_data; 325 struct domain_device *ex_dev = dev->parent; 326 struct sas_phy *phy = sas_get_local_phy(dev); 327 struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number]; 328 329 res = sas_ex_phy_discover(ex_dev, phy->number); 330 sas_put_local_phy(phy); 331 332 /* break the wait early if the expander is unreachable, 333 * otherwise keep polling 334 */ 335 if (res == -ECOMM) 336 return res; 337 if (res != SMP_RESP_FUNC_ACC) 338 return 0; 339 340 switch (ex_phy->attached_dev_type) { 341 case SAS_SATA_PENDING: 342 return 0; 343 case SAS_END_DEVICE: 344 if (ex_phy->attached_sata_dev) 345 return sas_ata_clear_pending(dev, ex_phy); 346 /* fall through */ 347 default: 348 return -ENODEV; 349 } 350 } 351 352 static int local_ata_check_ready(struct ata_link *link) 353 { 354 struct ata_port *ap = link->ap; 355 struct domain_device *dev = ap->private_data; 356 struct sas_internal *i = dev_to_sas_internal(dev); 357 358 if (i->dft->lldd_ata_check_ready) 359 return i->dft->lldd_ata_check_ready(dev); 360 else { 361 /* lldd's that don't implement 'ready' checking get the 362 * old default behavior of not coordinating reset 363 * recovery with libata 364 */ 365 return 1; 366 } 367 } 368 369 static int sas_ata_printk(const char *level, const struct domain_device *ddev, 370 const char *fmt, ...) 371 { 372 struct ata_port *ap = ddev->sata_dev.ap; 373 struct device *dev = &ddev->rphy->dev; 374 struct va_format vaf; 375 va_list args; 376 int r; 377 378 va_start(args, fmt); 379 380 vaf.fmt = fmt; 381 vaf.va = &args; 382 383 r = printk("%ssas: ata%u: %s: %pV", 384 level, ap->print_id, dev_name(dev), &vaf); 385 386 va_end(args); 387 388 return r; 389 } 390 391 static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, 392 unsigned long deadline) 393 { 394 int ret = 0, res; 395 struct sas_phy *phy; 396 struct ata_port *ap = link->ap; 397 int (*check_ready)(struct ata_link *link); 398 struct domain_device *dev = ap->private_data; 399 struct sas_internal *i = dev_to_sas_internal(dev); 400 401 res = i->dft->lldd_I_T_nexus_reset(dev); 402 if (res == -ENODEV) 403 return res; 404 405 if (res != TMF_RESP_FUNC_COMPLETE) 406 sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n"); 407 408 phy = sas_get_local_phy(dev); 409 if (scsi_is_sas_phy_local(phy)) 410 check_ready = local_ata_check_ready; 411 else 412 check_ready = smp_ata_check_ready; 413 sas_put_local_phy(phy); 414 415 ret = ata_wait_after_reset(link, deadline, check_ready); 416 if (ret && ret != -EAGAIN) 417 sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret); 418 419 *class = dev->sata_dev.class; 420 421 ap->cbl = ATA_CBL_SATA; 422 return ret; 423 } 424 425 /* 426 * notify the lldd to forget the sas_task for this internal ata command 427 * that bypasses scsi-eh 428 */ 429 static void sas_ata_internal_abort(struct sas_task *task) 430 { 431 struct sas_internal *si = dev_to_sas_internal(task->dev); 432 unsigned long flags; 433 int res; 434 435 spin_lock_irqsave(&task->task_state_lock, flags); 436 if (task->task_state_flags & SAS_TASK_STATE_ABORTED || 437 task->task_state_flags & SAS_TASK_STATE_DONE) { 438 spin_unlock_irqrestore(&task->task_state_lock, flags); 439 SAS_DPRINTK("%s: Task %p already finished.\n", __func__, 440 task); 441 goto out; 442 } 443 task->task_state_flags |= SAS_TASK_STATE_ABORTED; 444 spin_unlock_irqrestore(&task->task_state_lock, flags); 445 446 res = si->dft->lldd_abort_task(task); 447 448 spin_lock_irqsave(&task->task_state_lock, flags); 449 if (task->task_state_flags & SAS_TASK_STATE_DONE || 450 res == TMF_RESP_FUNC_COMPLETE) { 451 spin_unlock_irqrestore(&task->task_state_lock, flags); 452 goto out; 453 } 454 455 /* XXX we are not prepared to deal with ->lldd_abort_task() 456 * failures. TODO: lldds need to unconditionally forget about 457 * aborted ata tasks, otherwise we (likely) leak the sas task 458 * here 459 */ 460 SAS_DPRINTK("%s: Task %p leaked.\n", __func__, task); 461 462 if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) 463 task->task_state_flags &= ~SAS_TASK_STATE_ABORTED; 464 spin_unlock_irqrestore(&task->task_state_lock, flags); 465 466 return; 467 out: 468 sas_free_task(task); 469 } 470 471 static void sas_ata_post_internal(struct ata_queued_cmd *qc) 472 { 473 if (qc->flags & ATA_QCFLAG_FAILED) 474 qc->err_mask |= AC_ERR_OTHER; 475 476 if (qc->err_mask) { 477 /* 478 * Find the sas_task and kill it. By this point, libata 479 * has decided to kill the qc and has frozen the port. 480 * In this state sas_ata_task_done() will no longer free 481 * the sas_task, so we need to notify the lldd (via 482 * ->lldd_abort_task) that the task is dead and free it 483 * ourselves. 484 */ 485 struct sas_task *task = qc->lldd_task; 486 487 qc->lldd_task = NULL; 488 if (!task) 489 return; 490 task->uldd_task = NULL; 491 sas_ata_internal_abort(task); 492 } 493 } 494 495 496 static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev) 497 { 498 struct domain_device *dev = ap->private_data; 499 struct sas_internal *i = dev_to_sas_internal(dev); 500 501 if (i->dft->lldd_ata_set_dmamode) 502 i->dft->lldd_ata_set_dmamode(dev); 503 } 504 505 static void sas_ata_sched_eh(struct ata_port *ap) 506 { 507 struct domain_device *dev = ap->private_data; 508 struct sas_ha_struct *ha = dev->port->ha; 509 unsigned long flags; 510 511 spin_lock_irqsave(&ha->lock, flags); 512 if (!test_and_set_bit(SAS_DEV_EH_PENDING, &dev->state)) 513 ha->eh_active++; 514 ata_std_sched_eh(ap); 515 spin_unlock_irqrestore(&ha->lock, flags); 516 } 517 518 void sas_ata_end_eh(struct ata_port *ap) 519 { 520 struct domain_device *dev = ap->private_data; 521 struct sas_ha_struct *ha = dev->port->ha; 522 unsigned long flags; 523 524 spin_lock_irqsave(&ha->lock, flags); 525 if (test_and_clear_bit(SAS_DEV_EH_PENDING, &dev->state)) 526 ha->eh_active--; 527 spin_unlock_irqrestore(&ha->lock, flags); 528 } 529 530 static struct ata_port_operations sas_sata_ops = { 531 .prereset = ata_std_prereset, 532 .hardreset = sas_ata_hard_reset, 533 .postreset = ata_std_postreset, 534 .error_handler = ata_std_error_handler, 535 .post_internal_cmd = sas_ata_post_internal, 536 .qc_defer = ata_std_qc_defer, 537 .qc_prep = ata_noop_qc_prep, 538 .qc_issue = sas_ata_qc_issue, 539 .qc_fill_rtf = sas_ata_qc_fill_rtf, 540 .port_start = ata_sas_port_start, 541 .port_stop = ata_sas_port_stop, 542 .set_dmamode = sas_ata_set_dmamode, 543 .sched_eh = sas_ata_sched_eh, 544 .end_eh = sas_ata_end_eh, 545 }; 546 547 static struct ata_port_info sata_port_info = { 548 .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ | 549 ATA_FLAG_SAS_HOST | ATA_FLAG_FPDMA_AUX, 550 .pio_mask = ATA_PIO4, 551 .mwdma_mask = ATA_MWDMA2, 552 .udma_mask = ATA_UDMA6, 553 .port_ops = &sas_sata_ops 554 }; 555 556 int sas_ata_init(struct domain_device *found_dev) 557 { 558 struct sas_ha_struct *ha = found_dev->port->ha; 559 struct Scsi_Host *shost = ha->core.shost; 560 struct ata_port *ap; 561 int rc; 562 563 ata_host_init(&found_dev->sata_dev.ata_host, ha->dev, &sas_sata_ops); 564 ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host, 565 &sata_port_info, 566 shost); 567 if (!ap) { 568 SAS_DPRINTK("ata_sas_port_alloc failed.\n"); 569 return -ENODEV; 570 } 571 572 ap->private_data = found_dev; 573 ap->cbl = ATA_CBL_SATA; 574 ap->scsi_host = shost; 575 rc = ata_sas_port_init(ap); 576 if (rc) { 577 ata_sas_port_destroy(ap); 578 return rc; 579 } 580 rc = ata_sas_tport_add(found_dev->sata_dev.ata_host.dev, ap); 581 if (rc) { 582 ata_sas_port_destroy(ap); 583 return rc; 584 } 585 found_dev->sata_dev.ap = ap; 586 587 return 0; 588 } 589 590 void sas_ata_task_abort(struct sas_task *task) 591 { 592 struct ata_queued_cmd *qc = task->uldd_task; 593 struct completion *waiting; 594 595 /* Bounce SCSI-initiated commands to the SCSI EH */ 596 if (qc->scsicmd) { 597 struct request_queue *q = qc->scsicmd->device->request_queue; 598 unsigned long flags; 599 600 spin_lock_irqsave(q->queue_lock, flags); 601 blk_abort_request(qc->scsicmd->request); 602 spin_unlock_irqrestore(q->queue_lock, flags); 603 return; 604 } 605 606 /* Internal command, fake a timeout and complete. */ 607 qc->flags &= ~ATA_QCFLAG_ACTIVE; 608 qc->flags |= ATA_QCFLAG_FAILED; 609 qc->err_mask |= AC_ERR_TIMEOUT; 610 waiting = qc->private_data; 611 complete(waiting); 612 } 613 614 static int sas_get_ata_command_set(struct domain_device *dev) 615 { 616 struct dev_to_host_fis *fis = 617 (struct dev_to_host_fis *) dev->frame_rcvd; 618 struct ata_taskfile tf; 619 620 if (dev->dev_type == SAS_SATA_PENDING) 621 return ATA_DEV_UNKNOWN; 622 623 ata_tf_from_fis((const u8 *)fis, &tf); 624 625 return ata_dev_classify(&tf); 626 } 627 628 void sas_probe_sata(struct asd_sas_port *port) 629 { 630 struct domain_device *dev, *n; 631 632 mutex_lock(&port->ha->disco_mutex); 633 list_for_each_entry(dev, &port->disco_list, disco_list_node) { 634 if (!dev_is_sata(dev)) 635 continue; 636 637 ata_sas_async_probe(dev->sata_dev.ap); 638 } 639 mutex_unlock(&port->ha->disco_mutex); 640 641 list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { 642 if (!dev_is_sata(dev)) 643 continue; 644 645 sas_ata_wait_eh(dev); 646 647 /* if libata could not bring the link up, don't surface 648 * the device 649 */ 650 if (ata_dev_disabled(sas_to_ata_dev(dev))) 651 sas_fail_probe(dev, __func__, -ENODEV); 652 } 653 654 } 655 656 static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func) 657 { 658 struct domain_device *dev, *n; 659 660 list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) { 661 if (!dev_is_sata(dev)) 662 continue; 663 664 sas_ata_wait_eh(dev); 665 666 /* if libata failed to power manage the device, tear it down */ 667 if (ata_dev_disabled(sas_to_ata_dev(dev))) 668 sas_fail_probe(dev, func, -ENODEV); 669 } 670 } 671 672 void sas_suspend_sata(struct asd_sas_port *port) 673 { 674 struct domain_device *dev; 675 676 mutex_lock(&port->ha->disco_mutex); 677 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 678 struct sata_device *sata; 679 680 if (!dev_is_sata(dev)) 681 continue; 682 683 sata = &dev->sata_dev; 684 if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND) 685 continue; 686 687 ata_sas_port_suspend(sata->ap); 688 } 689 mutex_unlock(&port->ha->disco_mutex); 690 691 sas_ata_flush_pm_eh(port, __func__); 692 } 693 694 void sas_resume_sata(struct asd_sas_port *port) 695 { 696 struct domain_device *dev; 697 698 mutex_lock(&port->ha->disco_mutex); 699 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 700 struct sata_device *sata; 701 702 if (!dev_is_sata(dev)) 703 continue; 704 705 sata = &dev->sata_dev; 706 if (sata->ap->pm_mesg.event == PM_EVENT_ON) 707 continue; 708 709 ata_sas_port_resume(sata->ap); 710 } 711 mutex_unlock(&port->ha->disco_mutex); 712 713 sas_ata_flush_pm_eh(port, __func__); 714 } 715 716 /** 717 * sas_discover_sata - discover an STP/SATA domain device 718 * @dev: pointer to struct domain_device of interest 719 * 720 * Devices directly attached to a HA port, have no parents. All other 721 * devices do, and should have their "parent" pointer set appropriately 722 * before calling this function. 723 */ 724 int sas_discover_sata(struct domain_device *dev) 725 { 726 int res; 727 728 if (dev->dev_type == SAS_SATA_PM) 729 return -ENODEV; 730 731 dev->sata_dev.class = sas_get_ata_command_set(dev); 732 sas_fill_in_rphy(dev, dev->rphy); 733 734 res = sas_notify_lldd_dev_found(dev); 735 if (res) 736 return res; 737 738 return 0; 739 } 740 741 static void async_sas_ata_eh(void *data, async_cookie_t cookie) 742 { 743 struct domain_device *dev = data; 744 struct ata_port *ap = dev->sata_dev.ap; 745 struct sas_ha_struct *ha = dev->port->ha; 746 747 sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n"); 748 ata_scsi_port_error_handler(ha->core.shost, ap); 749 sas_put_device(dev); 750 } 751 752 void sas_ata_strategy_handler(struct Scsi_Host *shost) 753 { 754 struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); 755 ASYNC_DOMAIN_EXCLUSIVE(async); 756 int i; 757 758 /* it's ok to defer revalidation events during ata eh, these 759 * disks are in one of three states: 760 * 1/ present for initial domain discovery, and these 761 * resets will cause bcn flutters 762 * 2/ hot removed, we'll discover that after eh fails 763 * 3/ hot added after initial discovery, lost the race, and need 764 * to catch the next train. 765 */ 766 sas_disable_revalidation(sas_ha); 767 768 spin_lock_irq(&sas_ha->phy_port_lock); 769 for (i = 0; i < sas_ha->num_phys; i++) { 770 struct asd_sas_port *port = sas_ha->sas_port[i]; 771 struct domain_device *dev; 772 773 spin_lock(&port->dev_list_lock); 774 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 775 if (!dev_is_sata(dev)) 776 continue; 777 778 /* hold a reference over eh since we may be 779 * racing with final remove once all commands 780 * are completed 781 */ 782 kref_get(&dev->kref); 783 784 async_schedule_domain(async_sas_ata_eh, dev, &async); 785 } 786 spin_unlock(&port->dev_list_lock); 787 } 788 spin_unlock_irq(&sas_ha->phy_port_lock); 789 790 async_synchronize_full_domain(&async); 791 792 sas_enable_revalidation(sas_ha); 793 } 794 795 void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, 796 struct list_head *done_q) 797 { 798 struct scsi_cmnd *cmd, *n; 799 struct domain_device *eh_dev; 800 801 do { 802 LIST_HEAD(sata_q); 803 eh_dev = NULL; 804 805 list_for_each_entry_safe(cmd, n, work_q, eh_entry) { 806 struct domain_device *ddev = cmd_to_domain_dev(cmd); 807 808 if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd)) 809 continue; 810 if (eh_dev && eh_dev != ddev) 811 continue; 812 eh_dev = ddev; 813 list_move(&cmd->eh_entry, &sata_q); 814 } 815 816 if (!list_empty(&sata_q)) { 817 struct ata_port *ap = eh_dev->sata_dev.ap; 818 819 sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n"); 820 ata_scsi_cmd_error_handler(shost, ap, &sata_q); 821 /* 822 * ata's error handler may leave the cmd on the list 823 * so make sure they don't remain on a stack list 824 * about to go out of scope. 825 * 826 * This looks strange, since the commands are 827 * now part of no list, but the next error 828 * action will be ata_port_error_handler() 829 * which takes no list and sweeps them up 830 * anyway from the ata tag array. 831 */ 832 while (!list_empty(&sata_q)) 833 list_del_init(sata_q.next); 834 } 835 } while (eh_dev); 836 } 837 838 void sas_ata_schedule_reset(struct domain_device *dev) 839 { 840 struct ata_eh_info *ehi; 841 struct ata_port *ap; 842 unsigned long flags; 843 844 if (!dev_is_sata(dev)) 845 return; 846 847 ap = dev->sata_dev.ap; 848 ehi = &ap->link.eh_info; 849 850 spin_lock_irqsave(ap->lock, flags); 851 ehi->err_mask |= AC_ERR_TIMEOUT; 852 ehi->action |= ATA_EH_RESET; 853 ata_port_schedule_eh(ap); 854 spin_unlock_irqrestore(ap->lock, flags); 855 } 856 EXPORT_SYMBOL_GPL(sas_ata_schedule_reset); 857 858 void sas_ata_wait_eh(struct domain_device *dev) 859 { 860 struct ata_port *ap; 861 862 if (!dev_is_sata(dev)) 863 return; 864 865 ap = dev->sata_dev.ap; 866 ata_port_wait_eh(ap); 867 } 868