1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Support for SATA devices on Serial Attached SCSI (SAS) controllers 4 * 5 * Copyright (C) 2006 IBM Corporation 6 * 7 * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation 8 */ 9 10 #include <linux/scatterlist.h> 11 #include <linux/slab.h> 12 #include <linux/async.h> 13 #include <linux/export.h> 14 15 #include <scsi/sas_ata.h> 16 #include "sas_internal.h" 17 #include <scsi/scsi_host.h> 18 #include <scsi/scsi_device.h> 19 #include <scsi/scsi_tcq.h> 20 #include <scsi/scsi.h> 21 #include <scsi/scsi_transport.h> 22 #include <scsi/scsi_transport_sas.h> 23 #include "../scsi_sas_internal.h" 24 #include "../scsi_transport_api.h" 25 #include <scsi/scsi_eh.h> 26 27 static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts) 28 { 29 /* Cheesy attempt to translate SAS errors into ATA. Hah! */ 30 31 /* transport error */ 32 if (ts->resp == SAS_TASK_UNDELIVERED) 33 return AC_ERR_ATA_BUS; 34 35 /* ts->resp == SAS_TASK_COMPLETE */ 36 /* task delivered, what happened afterwards? */ 37 switch (ts->stat) { 38 case SAS_DEV_NO_RESPONSE: 39 return AC_ERR_TIMEOUT; 40 41 case SAS_INTERRUPTED: 42 case SAS_PHY_DOWN: 43 case SAS_NAK_R_ERR: 44 return AC_ERR_ATA_BUS; 45 46 47 case SAS_DATA_UNDERRUN: 48 /* 49 * Some programs that use the taskfile interface 50 * (smartctl in particular) can cause underrun 51 * problems. Ignore these errors, perhaps at our 52 * peril. 53 */ 54 return 0; 55 56 case SAS_DATA_OVERRUN: 57 case SAS_QUEUE_FULL: 58 case SAS_DEVICE_UNKNOWN: 59 case SAS_SG_ERR: 60 return AC_ERR_INVALID; 61 62 case SAS_OPEN_TO: 63 case SAS_OPEN_REJECT: 64 pr_warn("%s: Saw error %d. What to do?\n", 65 __func__, ts->stat); 66 return AC_ERR_OTHER; 67 68 case SAM_STAT_CHECK_CONDITION: 69 case SAS_ABORTED_TASK: 70 return AC_ERR_DEV; 71 72 case SAS_PROTO_RESPONSE: 73 /* This means the ending_fis has the error 74 * value; return 0 here to collect it */ 75 return 0; 76 default: 77 return 0; 78 } 79 } 80 81 static void sas_ata_task_done(struct sas_task *task) 82 { 83 struct ata_queued_cmd *qc = task->uldd_task; 84 struct domain_device *dev = task->dev; 85 struct task_status_struct *stat = &task->task_status; 86 struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf; 87 struct sas_ha_struct *sas_ha = dev->port->ha; 88 enum ata_completion_errors ac; 89 unsigned long flags; 90 struct ata_link *link; 91 struct ata_port *ap; 92 93 spin_lock_irqsave(&dev->done_lock, flags); 94 if (test_bit(SAS_HA_FROZEN, &sas_ha->state)) 95 task = NULL; 96 else if (qc && qc->scsicmd) 97 ASSIGN_SAS_TASK(qc->scsicmd, NULL); 98 spin_unlock_irqrestore(&dev->done_lock, flags); 99 100 /* check if libsas-eh got to the task before us */ 101 if (unlikely(!task)) 102 return; 103 104 if (!qc) 105 goto qc_already_gone; 106 107 ap = qc->ap; 108 link = &ap->link; 109 110 spin_lock_irqsave(ap->lock, flags); 111 /* check if we lost the race with libata/sas_ata_post_internal() */ 112 if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) { 113 spin_unlock_irqrestore(ap->lock, flags); 114 if (qc->scsicmd) 115 goto qc_already_gone; 116 else { 117 /* if eh is not involved and the port is frozen then the 118 * ata internal abort process has taken responsibility 119 * for this sas_task 120 */ 121 return; 122 } 123 } 124 125 if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD || 126 ((stat->stat == SAM_STAT_CHECK_CONDITION && 127 dev->sata_dev.class == ATA_DEV_ATAPI))) { 128 memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE); 129 130 if (!link->sactive) { 131 qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]); 132 } else { 133 link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]); 134 if (unlikely(link->eh_info.err_mask)) 135 qc->flags |= ATA_QCFLAG_FAILED; 136 } 137 } else { 138 ac = sas_to_ata_err(stat); 139 if (ac) { 140 pr_warn("%s: SAS error 0x%x\n", __func__, stat->stat); 141 /* We saw a SAS error. Send a vague error. */ 142 if (!link->sactive) { 143 qc->err_mask = ac; 144 } else { 145 link->eh_info.err_mask |= AC_ERR_DEV; 146 qc->flags |= ATA_QCFLAG_FAILED; 147 } 148 149 dev->sata_dev.fis[3] = 0x04; /* status err */ 150 dev->sata_dev.fis[2] = ATA_ERR; 151 } 152 } 153 154 qc->lldd_task = NULL; 155 ata_qc_complete(qc); 156 spin_unlock_irqrestore(ap->lock, flags); 157 158 qc_already_gone: 159 sas_free_task(task); 160 } 161 162 static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) 163 { 164 struct sas_task *task; 165 struct scatterlist *sg; 166 int ret = AC_ERR_SYSTEM; 167 unsigned int si, xfer = 0; 168 struct ata_port *ap = qc->ap; 169 struct domain_device *dev = ap->private_data; 170 struct sas_ha_struct *sas_ha = dev->port->ha; 171 struct Scsi_Host *host = sas_ha->core.shost; 172 struct sas_internal *i = to_sas_internal(host->transportt); 173 174 /* TODO: we should try to remove that unlock */ 175 spin_unlock(ap->lock); 176 177 /* If the device fell off, no sense in issuing commands */ 178 if (test_bit(SAS_DEV_GONE, &dev->state)) 179 goto out; 180 181 task = sas_alloc_task(GFP_ATOMIC); 182 if (!task) 183 goto out; 184 task->dev = dev; 185 task->task_proto = SAS_PROTOCOL_STP; 186 task->task_done = sas_ata_task_done; 187 188 if (qc->tf.command == ATA_CMD_FPDMA_WRITE || 189 qc->tf.command == ATA_CMD_FPDMA_READ || 190 qc->tf.command == ATA_CMD_FPDMA_RECV || 191 qc->tf.command == ATA_CMD_FPDMA_SEND || 192 qc->tf.command == ATA_CMD_NCQ_NON_DATA) { 193 /* Need to zero out the tag libata assigned us */ 194 qc->tf.nsect = 0; 195 } 196 197 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis); 198 task->uldd_task = qc; 199 if (ata_is_atapi(qc->tf.protocol)) { 200 memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); 201 task->total_xfer_len = qc->nbytes; 202 task->num_scatter = qc->n_elem; 203 } else { 204 for_each_sg(qc->sg, sg, qc->n_elem, si) 205 xfer += sg_dma_len(sg); 206 207 task->total_xfer_len = xfer; 208 task->num_scatter = si; 209 } 210 211 task->data_dir = qc->dma_dir; 212 task->scatter = qc->sg; 213 task->ata_task.retry_count = 1; 214 task->task_state_flags = SAS_TASK_STATE_PENDING; 215 qc->lldd_task = task; 216 217 task->ata_task.use_ncq = ata_is_ncq(qc->tf.protocol); 218 task->ata_task.dma_xfer = ata_is_dma(qc->tf.protocol); 219 220 if (qc->scsicmd) 221 ASSIGN_SAS_TASK(qc->scsicmd, task); 222 223 ret = i->dft->lldd_execute_task(task, GFP_ATOMIC); 224 if (ret) { 225 pr_debug("lldd_execute_task returned: %d\n", ret); 226 227 if (qc->scsicmd) 228 ASSIGN_SAS_TASK(qc->scsicmd, NULL); 229 sas_free_task(task); 230 qc->lldd_task = NULL; 231 ret = AC_ERR_SYSTEM; 232 } 233 234 out: 235 spin_lock(ap->lock); 236 return ret; 237 } 238 239 static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc) 240 { 241 struct domain_device *dev = qc->ap->private_data; 242 243 ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf); 244 return true; 245 } 246 247 static struct sas_internal *dev_to_sas_internal(struct domain_device *dev) 248 { 249 return to_sas_internal(dev->port->ha->core.shost->transportt); 250 } 251 252 static int sas_get_ata_command_set(struct domain_device *dev); 253 254 int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy) 255 { 256 if (phy->attached_tproto & SAS_PROTOCOL_STP) 257 dev->tproto = phy->attached_tproto; 258 if (phy->attached_sata_dev) 259 dev->tproto |= SAS_SATA_DEV; 260 261 if (phy->attached_dev_type == SAS_SATA_PENDING) 262 dev->dev_type = SAS_SATA_PENDING; 263 else { 264 int res; 265 266 dev->dev_type = SAS_SATA_DEV; 267 res = sas_get_report_phy_sata(dev->parent, phy->phy_id, 268 &dev->sata_dev.rps_resp); 269 if (res) { 270 pr_debug("report phy sata to %016llx:%02d returned 0x%x\n", 271 SAS_ADDR(dev->parent->sas_addr), 272 phy->phy_id, res); 273 return res; 274 } 275 memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis, 276 sizeof(struct dev_to_host_fis)); 277 dev->sata_dev.class = sas_get_ata_command_set(dev); 278 } 279 return 0; 280 } 281 282 static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy) 283 { 284 int res; 285 286 /* we weren't pending, so successfully end the reset sequence now */ 287 if (dev->dev_type != SAS_SATA_PENDING) 288 return 1; 289 290 /* hmmm, if this succeeds do we need to repost the domain_device to the 291 * lldd so it can pick up new parameters? 292 */ 293 res = sas_get_ata_info(dev, phy); 294 if (res) 295 return 0; /* retry */ 296 else 297 return 1; 298 } 299 300 static int smp_ata_check_ready(struct ata_link *link) 301 { 302 int res; 303 struct ata_port *ap = link->ap; 304 struct domain_device *dev = ap->private_data; 305 struct domain_device *ex_dev = dev->parent; 306 struct sas_phy *phy = sas_get_local_phy(dev); 307 struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number]; 308 309 res = sas_ex_phy_discover(ex_dev, phy->number); 310 sas_put_local_phy(phy); 311 312 /* break the wait early if the expander is unreachable, 313 * otherwise keep polling 314 */ 315 if (res == -ECOMM) 316 return res; 317 if (res != SMP_RESP_FUNC_ACC) 318 return 0; 319 320 switch (ex_phy->attached_dev_type) { 321 case SAS_SATA_PENDING: 322 return 0; 323 case SAS_END_DEVICE: 324 if (ex_phy->attached_sata_dev) 325 return sas_ata_clear_pending(dev, ex_phy); 326 /* fall through */ 327 default: 328 return -ENODEV; 329 } 330 } 331 332 static int local_ata_check_ready(struct ata_link *link) 333 { 334 struct ata_port *ap = link->ap; 335 struct domain_device *dev = ap->private_data; 336 struct sas_internal *i = dev_to_sas_internal(dev); 337 338 if (i->dft->lldd_ata_check_ready) 339 return i->dft->lldd_ata_check_ready(dev); 340 else { 341 /* lldd's that don't implement 'ready' checking get the 342 * old default behavior of not coordinating reset 343 * recovery with libata 344 */ 345 return 1; 346 } 347 } 348 349 static int sas_ata_printk(const char *level, const struct domain_device *ddev, 350 const char *fmt, ...) 351 { 352 struct ata_port *ap = ddev->sata_dev.ap; 353 struct device *dev = &ddev->rphy->dev; 354 struct va_format vaf; 355 va_list args; 356 int r; 357 358 va_start(args, fmt); 359 360 vaf.fmt = fmt; 361 vaf.va = &args; 362 363 r = printk("%s" SAS_FMT "ata%u: %s: %pV", 364 level, ap->print_id, dev_name(dev), &vaf); 365 366 va_end(args); 367 368 return r; 369 } 370 371 static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, 372 unsigned long deadline) 373 { 374 int ret = 0, res; 375 struct sas_phy *phy; 376 struct ata_port *ap = link->ap; 377 int (*check_ready)(struct ata_link *link); 378 struct domain_device *dev = ap->private_data; 379 struct sas_internal *i = dev_to_sas_internal(dev); 380 381 res = i->dft->lldd_I_T_nexus_reset(dev); 382 if (res == -ENODEV) 383 return res; 384 385 if (res != TMF_RESP_FUNC_COMPLETE) 386 sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n"); 387 388 phy = sas_get_local_phy(dev); 389 if (scsi_is_sas_phy_local(phy)) 390 check_ready = local_ata_check_ready; 391 else 392 check_ready = smp_ata_check_ready; 393 sas_put_local_phy(phy); 394 395 ret = ata_wait_after_reset(link, deadline, check_ready); 396 if (ret && ret != -EAGAIN) 397 sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret); 398 399 *class = dev->sata_dev.class; 400 401 ap->cbl = ATA_CBL_SATA; 402 return ret; 403 } 404 405 /* 406 * notify the lldd to forget the sas_task for this internal ata command 407 * that bypasses scsi-eh 408 */ 409 static void sas_ata_internal_abort(struct sas_task *task) 410 { 411 struct sas_internal *si = dev_to_sas_internal(task->dev); 412 unsigned long flags; 413 int res; 414 415 spin_lock_irqsave(&task->task_state_lock, flags); 416 if (task->task_state_flags & SAS_TASK_STATE_ABORTED || 417 task->task_state_flags & SAS_TASK_STATE_DONE) { 418 spin_unlock_irqrestore(&task->task_state_lock, flags); 419 pr_debug("%s: Task %p already finished.\n", __func__, task); 420 goto out; 421 } 422 task->task_state_flags |= SAS_TASK_STATE_ABORTED; 423 spin_unlock_irqrestore(&task->task_state_lock, flags); 424 425 res = si->dft->lldd_abort_task(task); 426 427 spin_lock_irqsave(&task->task_state_lock, flags); 428 if (task->task_state_flags & SAS_TASK_STATE_DONE || 429 res == TMF_RESP_FUNC_COMPLETE) { 430 spin_unlock_irqrestore(&task->task_state_lock, flags); 431 goto out; 432 } 433 434 /* XXX we are not prepared to deal with ->lldd_abort_task() 435 * failures. TODO: lldds need to unconditionally forget about 436 * aborted ata tasks, otherwise we (likely) leak the sas task 437 * here 438 */ 439 pr_warn("%s: Task %p leaked.\n", __func__, task); 440 441 if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) 442 task->task_state_flags &= ~SAS_TASK_STATE_ABORTED; 443 spin_unlock_irqrestore(&task->task_state_lock, flags); 444 445 return; 446 out: 447 sas_free_task(task); 448 } 449 450 static void sas_ata_post_internal(struct ata_queued_cmd *qc) 451 { 452 if (qc->flags & ATA_QCFLAG_FAILED) 453 qc->err_mask |= AC_ERR_OTHER; 454 455 if (qc->err_mask) { 456 /* 457 * Find the sas_task and kill it. By this point, libata 458 * has decided to kill the qc and has frozen the port. 459 * In this state sas_ata_task_done() will no longer free 460 * the sas_task, so we need to notify the lldd (via 461 * ->lldd_abort_task) that the task is dead and free it 462 * ourselves. 463 */ 464 struct sas_task *task = qc->lldd_task; 465 466 qc->lldd_task = NULL; 467 if (!task) 468 return; 469 task->uldd_task = NULL; 470 sas_ata_internal_abort(task); 471 } 472 } 473 474 475 static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev) 476 { 477 struct domain_device *dev = ap->private_data; 478 struct sas_internal *i = dev_to_sas_internal(dev); 479 480 if (i->dft->lldd_ata_set_dmamode) 481 i->dft->lldd_ata_set_dmamode(dev); 482 } 483 484 static void sas_ata_sched_eh(struct ata_port *ap) 485 { 486 struct domain_device *dev = ap->private_data; 487 struct sas_ha_struct *ha = dev->port->ha; 488 unsigned long flags; 489 490 spin_lock_irqsave(&ha->lock, flags); 491 if (!test_and_set_bit(SAS_DEV_EH_PENDING, &dev->state)) 492 ha->eh_active++; 493 ata_std_sched_eh(ap); 494 spin_unlock_irqrestore(&ha->lock, flags); 495 } 496 497 void sas_ata_end_eh(struct ata_port *ap) 498 { 499 struct domain_device *dev = ap->private_data; 500 struct sas_ha_struct *ha = dev->port->ha; 501 unsigned long flags; 502 503 spin_lock_irqsave(&ha->lock, flags); 504 if (test_and_clear_bit(SAS_DEV_EH_PENDING, &dev->state)) 505 ha->eh_active--; 506 spin_unlock_irqrestore(&ha->lock, flags); 507 } 508 509 static struct ata_port_operations sas_sata_ops = { 510 .prereset = ata_std_prereset, 511 .hardreset = sas_ata_hard_reset, 512 .postreset = ata_std_postreset, 513 .error_handler = ata_std_error_handler, 514 .post_internal_cmd = sas_ata_post_internal, 515 .qc_defer = ata_std_qc_defer, 516 .qc_prep = ata_noop_qc_prep, 517 .qc_issue = sas_ata_qc_issue, 518 .qc_fill_rtf = sas_ata_qc_fill_rtf, 519 .port_start = ata_sas_port_start, 520 .port_stop = ata_sas_port_stop, 521 .set_dmamode = sas_ata_set_dmamode, 522 .sched_eh = sas_ata_sched_eh, 523 .end_eh = sas_ata_end_eh, 524 }; 525 526 static struct ata_port_info sata_port_info = { 527 .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ | 528 ATA_FLAG_SAS_HOST | ATA_FLAG_FPDMA_AUX, 529 .pio_mask = ATA_PIO4, 530 .mwdma_mask = ATA_MWDMA2, 531 .udma_mask = ATA_UDMA6, 532 .port_ops = &sas_sata_ops 533 }; 534 535 int sas_ata_init(struct domain_device *found_dev) 536 { 537 struct sas_ha_struct *ha = found_dev->port->ha; 538 struct Scsi_Host *shost = ha->core.shost; 539 struct ata_host *ata_host; 540 struct ata_port *ap; 541 int rc; 542 543 ata_host = kzalloc(sizeof(*ata_host), GFP_KERNEL); 544 if (!ata_host) { 545 pr_err("ata host alloc failed.\n"); 546 return -ENOMEM; 547 } 548 549 ata_host_init(ata_host, ha->dev, &sas_sata_ops); 550 551 ap = ata_sas_port_alloc(ata_host, &sata_port_info, shost); 552 if (!ap) { 553 pr_err("ata_sas_port_alloc failed.\n"); 554 rc = -ENODEV; 555 goto free_host; 556 } 557 558 ap->private_data = found_dev; 559 ap->cbl = ATA_CBL_SATA; 560 ap->scsi_host = shost; 561 rc = ata_sas_port_init(ap); 562 if (rc) 563 goto destroy_port; 564 565 rc = ata_sas_tport_add(ata_host->dev, ap); 566 if (rc) 567 goto destroy_port; 568 569 found_dev->sata_dev.ata_host = ata_host; 570 found_dev->sata_dev.ap = ap; 571 572 return 0; 573 574 destroy_port: 575 ata_sas_port_destroy(ap); 576 free_host: 577 ata_host_put(ata_host); 578 return rc; 579 } 580 581 void sas_ata_task_abort(struct sas_task *task) 582 { 583 struct ata_queued_cmd *qc = task->uldd_task; 584 struct completion *waiting; 585 586 /* Bounce SCSI-initiated commands to the SCSI EH */ 587 if (qc->scsicmd) { 588 blk_abort_request(qc->scsicmd->request); 589 return; 590 } 591 592 /* Internal command, fake a timeout and complete. */ 593 qc->flags &= ~ATA_QCFLAG_ACTIVE; 594 qc->flags |= ATA_QCFLAG_FAILED; 595 qc->err_mask |= AC_ERR_TIMEOUT; 596 waiting = qc->private_data; 597 complete(waiting); 598 } 599 600 static int sas_get_ata_command_set(struct domain_device *dev) 601 { 602 struct dev_to_host_fis *fis = 603 (struct dev_to_host_fis *) dev->frame_rcvd; 604 struct ata_taskfile tf; 605 606 if (dev->dev_type == SAS_SATA_PENDING) 607 return ATA_DEV_UNKNOWN; 608 609 ata_tf_from_fis((const u8 *)fis, &tf); 610 611 return ata_dev_classify(&tf); 612 } 613 614 void sas_probe_sata(struct asd_sas_port *port) 615 { 616 struct domain_device *dev, *n; 617 618 mutex_lock(&port->ha->disco_mutex); 619 list_for_each_entry(dev, &port->disco_list, disco_list_node) { 620 if (!dev_is_sata(dev)) 621 continue; 622 623 ata_sas_async_probe(dev->sata_dev.ap); 624 } 625 mutex_unlock(&port->ha->disco_mutex); 626 627 list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { 628 if (!dev_is_sata(dev)) 629 continue; 630 631 sas_ata_wait_eh(dev); 632 633 /* if libata could not bring the link up, don't surface 634 * the device 635 */ 636 if (!ata_dev_enabled(sas_to_ata_dev(dev))) 637 sas_fail_probe(dev, __func__, -ENODEV); 638 } 639 640 } 641 642 static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func) 643 { 644 struct domain_device *dev, *n; 645 646 list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) { 647 if (!dev_is_sata(dev)) 648 continue; 649 650 sas_ata_wait_eh(dev); 651 652 /* if libata failed to power manage the device, tear it down */ 653 if (ata_dev_disabled(sas_to_ata_dev(dev))) 654 sas_fail_probe(dev, func, -ENODEV); 655 } 656 } 657 658 void sas_suspend_sata(struct asd_sas_port *port) 659 { 660 struct domain_device *dev; 661 662 mutex_lock(&port->ha->disco_mutex); 663 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 664 struct sata_device *sata; 665 666 if (!dev_is_sata(dev)) 667 continue; 668 669 sata = &dev->sata_dev; 670 if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND) 671 continue; 672 673 ata_sas_port_suspend(sata->ap); 674 } 675 mutex_unlock(&port->ha->disco_mutex); 676 677 sas_ata_flush_pm_eh(port, __func__); 678 } 679 680 void sas_resume_sata(struct asd_sas_port *port) 681 { 682 struct domain_device *dev; 683 684 mutex_lock(&port->ha->disco_mutex); 685 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 686 struct sata_device *sata; 687 688 if (!dev_is_sata(dev)) 689 continue; 690 691 sata = &dev->sata_dev; 692 if (sata->ap->pm_mesg.event == PM_EVENT_ON) 693 continue; 694 695 ata_sas_port_resume(sata->ap); 696 } 697 mutex_unlock(&port->ha->disco_mutex); 698 699 sas_ata_flush_pm_eh(port, __func__); 700 } 701 702 /** 703 * sas_discover_sata - discover an STP/SATA domain device 704 * @dev: pointer to struct domain_device of interest 705 * 706 * Devices directly attached to a HA port, have no parents. All other 707 * devices do, and should have their "parent" pointer set appropriately 708 * before calling this function. 709 */ 710 int sas_discover_sata(struct domain_device *dev) 711 { 712 int res; 713 714 if (dev->dev_type == SAS_SATA_PM) 715 return -ENODEV; 716 717 dev->sata_dev.class = sas_get_ata_command_set(dev); 718 sas_fill_in_rphy(dev, dev->rphy); 719 720 res = sas_notify_lldd_dev_found(dev); 721 if (res) 722 return res; 723 724 return 0; 725 } 726 727 static void async_sas_ata_eh(void *data, async_cookie_t cookie) 728 { 729 struct domain_device *dev = data; 730 struct ata_port *ap = dev->sata_dev.ap; 731 struct sas_ha_struct *ha = dev->port->ha; 732 733 sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n"); 734 ata_scsi_port_error_handler(ha->core.shost, ap); 735 sas_put_device(dev); 736 } 737 738 void sas_ata_strategy_handler(struct Scsi_Host *shost) 739 { 740 struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); 741 ASYNC_DOMAIN_EXCLUSIVE(async); 742 int i; 743 744 /* it's ok to defer revalidation events during ata eh, these 745 * disks are in one of three states: 746 * 1/ present for initial domain discovery, and these 747 * resets will cause bcn flutters 748 * 2/ hot removed, we'll discover that after eh fails 749 * 3/ hot added after initial discovery, lost the race, and need 750 * to catch the next train. 751 */ 752 sas_disable_revalidation(sas_ha); 753 754 spin_lock_irq(&sas_ha->phy_port_lock); 755 for (i = 0; i < sas_ha->num_phys; i++) { 756 struct asd_sas_port *port = sas_ha->sas_port[i]; 757 struct domain_device *dev; 758 759 spin_lock(&port->dev_list_lock); 760 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 761 if (!dev_is_sata(dev)) 762 continue; 763 764 /* hold a reference over eh since we may be 765 * racing with final remove once all commands 766 * are completed 767 */ 768 kref_get(&dev->kref); 769 770 async_schedule_domain(async_sas_ata_eh, dev, &async); 771 } 772 spin_unlock(&port->dev_list_lock); 773 } 774 spin_unlock_irq(&sas_ha->phy_port_lock); 775 776 async_synchronize_full_domain(&async); 777 778 sas_enable_revalidation(sas_ha); 779 } 780 781 void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, 782 struct list_head *done_q) 783 { 784 struct scsi_cmnd *cmd, *n; 785 struct domain_device *eh_dev; 786 787 do { 788 LIST_HEAD(sata_q); 789 eh_dev = NULL; 790 791 list_for_each_entry_safe(cmd, n, work_q, eh_entry) { 792 struct domain_device *ddev = cmd_to_domain_dev(cmd); 793 794 if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd)) 795 continue; 796 if (eh_dev && eh_dev != ddev) 797 continue; 798 eh_dev = ddev; 799 list_move(&cmd->eh_entry, &sata_q); 800 } 801 802 if (!list_empty(&sata_q)) { 803 struct ata_port *ap = eh_dev->sata_dev.ap; 804 805 sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n"); 806 ata_scsi_cmd_error_handler(shost, ap, &sata_q); 807 /* 808 * ata's error handler may leave the cmd on the list 809 * so make sure they don't remain on a stack list 810 * about to go out of scope. 811 * 812 * This looks strange, since the commands are 813 * now part of no list, but the next error 814 * action will be ata_port_error_handler() 815 * which takes no list and sweeps them up 816 * anyway from the ata tag array. 817 */ 818 while (!list_empty(&sata_q)) 819 list_del_init(sata_q.next); 820 } 821 } while (eh_dev); 822 } 823 824 void sas_ata_schedule_reset(struct domain_device *dev) 825 { 826 struct ata_eh_info *ehi; 827 struct ata_port *ap; 828 unsigned long flags; 829 830 if (!dev_is_sata(dev)) 831 return; 832 833 ap = dev->sata_dev.ap; 834 ehi = &ap->link.eh_info; 835 836 spin_lock_irqsave(ap->lock, flags); 837 ehi->err_mask |= AC_ERR_TIMEOUT; 838 ehi->action |= ATA_EH_RESET; 839 ata_port_schedule_eh(ap); 840 spin_unlock_irqrestore(ap->lock, flags); 841 } 842 EXPORT_SYMBOL_GPL(sas_ata_schedule_reset); 843 844 void sas_ata_wait_eh(struct domain_device *dev) 845 { 846 struct ata_port *ap; 847 848 if (!dev_is_sata(dev)) 849 return; 850 851 ap = dev->sata_dev.ap; 852 ata_port_wait_eh(ap); 853 } 854