xref: /openbmc/linux/drivers/scsi/libfc/fc_fcp.c (revision e7253313)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright(c) 2007 Intel Corporation. All rights reserved.
4  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
5  * Copyright(c) 2008 Mike Christie
6  *
7  * Maintained at www.Open-FCoE.org
8  */
9 
10 #include <linux/module.h>
11 #include <linux/delay.h>
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/spinlock.h>
15 #include <linux/scatterlist.h>
16 #include <linux/err.h>
17 #include <linux/crc32.h>
18 #include <linux/slab.h>
19 
20 #include <scsi/scsi_tcq.h>
21 #include <scsi/scsi.h>
22 #include <scsi/scsi_host.h>
23 #include <scsi/scsi_device.h>
24 #include <scsi/scsi_cmnd.h>
25 
26 #include <scsi/fc/fc_fc2.h>
27 
28 #include <scsi/libfc.h>
29 #include <scsi/fc_encode.h>
30 
31 #include "fc_libfc.h"
32 
33 static struct kmem_cache *scsi_pkt_cachep;
34 
35 /* SRB state definitions */
36 #define FC_SRB_FREE		0		/* cmd is free */
37 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
38 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
39 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
40 #define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
41 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
42 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
43 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
44 
45 #define FC_SRB_READ		(1 << 1)
46 #define FC_SRB_WRITE		(1 << 0)
47 
48 /*
49  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
50  */
51 #define CMD_SP(Cmnd)		    ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
52 #define CMD_ENTRY_STATUS(Cmnd)	    ((Cmnd)->SCp.have_data_in)
53 #define CMD_COMPL_STATUS(Cmnd)	    ((Cmnd)->SCp.this_residual)
54 #define CMD_SCSI_STATUS(Cmnd)	    ((Cmnd)->SCp.Status)
55 #define CMD_RESID_LEN(Cmnd)	    ((Cmnd)->SCp.buffers_residual)
56 
57 /**
58  * struct fc_fcp_internal - FCP layer internal data
59  * @scsi_pkt_pool: Memory pool to draw FCP packets from
60  * @scsi_queue_lock: Protects the scsi_pkt_queue
61  * @scsi_pkt_queue: Current FCP packets
62  * @last_can_queue_ramp_down_time: ramp down time
63  * @last_can_queue_ramp_up_time: ramp up time
64  * @max_can_queue: max can_queue size
65  */
66 struct fc_fcp_internal {
67 	mempool_t		*scsi_pkt_pool;
68 	spinlock_t		scsi_queue_lock;
69 	struct list_head	scsi_pkt_queue;
70 	unsigned long		last_can_queue_ramp_down_time;
71 	unsigned long		last_can_queue_ramp_up_time;
72 	int			max_can_queue;
73 };
74 
75 #define fc_get_scsi_internal(x)	((struct fc_fcp_internal *)(x)->scsi_priv)
76 
77 /*
78  * function prototypes
79  * FC scsi I/O related functions
80  */
81 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
82 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
83 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
84 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
85 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
86 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
87 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
88 static void fc_fcp_timeout(struct timer_list *);
89 static void fc_fcp_rec(struct fc_fcp_pkt *);
90 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
91 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
92 static void fc_io_compl(struct fc_fcp_pkt *);
93 
94 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
95 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
96 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
97 
98 /*
99  * command status codes
100  */
101 #define FC_COMPLETE		0
102 #define FC_CMD_ABORTED		1
103 #define FC_CMD_RESET		2
104 #define FC_CMD_PLOGO		3
105 #define FC_SNS_RCV		4
106 #define FC_TRANS_ERR		5
107 #define FC_DATA_OVRRUN		6
108 #define FC_DATA_UNDRUN		7
109 #define FC_ERROR		8
110 #define FC_HRD_ERROR		9
111 #define FC_CRC_ERROR		10
112 #define FC_TIMED_OUT		11
113 #define FC_TRANS_RESET		12
114 
115 /*
116  * Error recovery timeout values.
117  */
118 #define FC_SCSI_TM_TOV		(10 * HZ)
119 #define FC_HOST_RESET_TIMEOUT	(30 * HZ)
120 #define FC_CAN_QUEUE_PERIOD	(60 * HZ)
121 
122 #define FC_MAX_ERROR_CNT	5
123 #define FC_MAX_RECOV_RETRY	3
124 
125 #define FC_FCP_DFLT_QUEUE_DEPTH 32
126 
127 /**
128  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
129  * @lport: The local port that the FCP packet is for
130  * @gfp:   GFP flags for allocation
131  *
132  * Return value: fcp_pkt structure or null on allocation failure.
133  * Context:	 Can be called from process context, no lock is required.
134  */
135 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
136 {
137 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
138 	struct fc_fcp_pkt *fsp;
139 
140 	fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
141 	if (fsp) {
142 		memset(fsp, 0, sizeof(*fsp));
143 		fsp->lp = lport;
144 		fsp->xfer_ddp = FC_XID_UNKNOWN;
145 		refcount_set(&fsp->ref_cnt, 1);
146 		timer_setup(&fsp->timer, NULL, 0);
147 		INIT_LIST_HEAD(&fsp->list);
148 		spin_lock_init(&fsp->scsi_pkt_lock);
149 	} else {
150 		per_cpu_ptr(lport->stats, get_cpu())->FcpPktAllocFails++;
151 		put_cpu();
152 	}
153 	return fsp;
154 }
155 
156 /**
157  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
158  * @fsp: The FCP packet to be released
159  *
160  * Context: Can be called from process or interrupt context,
161  *	    no lock is required.
162  */
163 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
164 {
165 	if (refcount_dec_and_test(&fsp->ref_cnt)) {
166 		struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
167 
168 		mempool_free(fsp, si->scsi_pkt_pool);
169 	}
170 }
171 
172 /**
173  * fc_fcp_pkt_hold() - Hold a fcp_pkt
174  * @fsp: The FCP packet to be held
175  */
176 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
177 {
178 	refcount_inc(&fsp->ref_cnt);
179 }
180 
181 /**
182  * fc_fcp_pkt_destroy() - Release hold on a fcp_pkt
183  * @seq: The sequence that the FCP packet is on (required by destructor API)
184  * @fsp: The FCP packet to be released
185  *
186  * This routine is called by a destructor callback in the fc_exch_seq_send()
187  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
188  * argument even though it is not used by this routine.
189  *
190  * Context: No locking required.
191  */
192 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
193 {
194 	fc_fcp_pkt_release(fsp);
195 }
196 
197 /**
198  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
199  * @fsp: The FCP packet to be locked and incremented
200  *
201  * We should only return error if we return a command to SCSI-ml before
202  * getting a response. This can happen in cases where we send a abort, but
203  * do not wait for the response and the abort and command can be passing
204  * each other on the wire/network-layer.
205  *
206  * Note: this function locks the packet and gets a reference to allow
207  * callers to call the completion function while the lock is held and
208  * not have to worry about the packets refcount.
209  *
210  * TODO: Maybe we should just have callers grab/release the lock and
211  * have a function that they call to verify the fsp and grab a ref if
212  * needed.
213  */
214 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
215 {
216 	spin_lock_bh(&fsp->scsi_pkt_lock);
217 	if (fsp->state & FC_SRB_COMPL) {
218 		spin_unlock_bh(&fsp->scsi_pkt_lock);
219 		return -EPERM;
220 	}
221 
222 	fc_fcp_pkt_hold(fsp);
223 	return 0;
224 }
225 
226 /**
227  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
228  *			 reference count
229  * @fsp: The FCP packet to be unlocked and decremented
230  */
231 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
232 {
233 	spin_unlock_bh(&fsp->scsi_pkt_lock);
234 	fc_fcp_pkt_release(fsp);
235 }
236 
237 /**
238  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
239  * @fsp:   The FCP packet to start a timer for
240  * @delay: The timeout period in jiffies
241  */
242 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
243 {
244 	if (!(fsp->state & FC_SRB_COMPL)) {
245 		mod_timer(&fsp->timer, jiffies + delay);
246 		fsp->timer_delay = delay;
247 	}
248 }
249 
250 static void fc_fcp_abort_done(struct fc_fcp_pkt *fsp)
251 {
252 	fsp->state |= FC_SRB_ABORTED;
253 	fsp->state &= ~FC_SRB_ABORT_PENDING;
254 
255 	if (fsp->wait_for_comp)
256 		complete(&fsp->tm_done);
257 	else
258 		fc_fcp_complete_locked(fsp);
259 }
260 
261 /**
262  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
263  *			 fcp_pkt
264  * @fsp: The FCP packet to abort exchanges on
265  */
266 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
267 {
268 	int rc;
269 
270 	if (!fsp->seq_ptr)
271 		return -EINVAL;
272 
273 	per_cpu_ptr(fsp->lp->stats, get_cpu())->FcpPktAborts++;
274 	put_cpu();
275 
276 	fsp->state |= FC_SRB_ABORT_PENDING;
277 	rc = fc_seq_exch_abort(fsp->seq_ptr, 0);
278 	/*
279 	 * fc_seq_exch_abort() might return -ENXIO if
280 	 * the sequence is already completed
281 	 */
282 	if (rc == -ENXIO) {
283 		fc_fcp_abort_done(fsp);
284 		rc = 0;
285 	}
286 	return rc;
287 }
288 
289 /**
290  * fc_fcp_retry_cmd() - Retry a fcp_pkt
291  * @fsp: The FCP packet to be retried
292  *
293  * Sets the status code to be FC_ERROR and then calls
294  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
295  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
296  * The SCSI-ml will retry the command.
297  */
298 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp, int status_code)
299 {
300 	if (fsp->seq_ptr) {
301 		fc_exch_done(fsp->seq_ptr);
302 		fsp->seq_ptr = NULL;
303 	}
304 
305 	fsp->state &= ~FC_SRB_ABORT_PENDING;
306 	fsp->io_status = 0;
307 	fsp->status_code = status_code;
308 	fc_fcp_complete_locked(fsp);
309 }
310 
311 /**
312  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
313  * @fsp: The FCP packet that will manage the DDP frames
314  * @xid: The XID that will be used for the DDP exchange
315  */
316 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
317 {
318 	struct fc_lport *lport;
319 
320 	lport = fsp->lp;
321 	if ((fsp->req_flags & FC_SRB_READ) &&
322 	    (lport->lro_enabled) && (lport->tt.ddp_setup)) {
323 		if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
324 					scsi_sg_count(fsp->cmd)))
325 			fsp->xfer_ddp = xid;
326 	}
327 }
328 
329 /**
330  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
331  *		       DDP related resources for a fcp_pkt
332  * @fsp: The FCP packet that DDP had been used on
333  */
334 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
335 {
336 	struct fc_lport *lport;
337 
338 	if (!fsp)
339 		return;
340 
341 	if (fsp->xfer_ddp == FC_XID_UNKNOWN)
342 		return;
343 
344 	lport = fsp->lp;
345 	if (lport->tt.ddp_done) {
346 		fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
347 		fsp->xfer_ddp = FC_XID_UNKNOWN;
348 	}
349 }
350 
351 /**
352  * fc_fcp_can_queue_ramp_up() - increases can_queue
353  * @lport: lport to ramp up can_queue
354  */
355 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
356 {
357 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
358 	unsigned long flags;
359 	int can_queue;
360 
361 	spin_lock_irqsave(lport->host->host_lock, flags);
362 
363 	if (si->last_can_queue_ramp_up_time &&
364 	    (time_before(jiffies, si->last_can_queue_ramp_up_time +
365 			 FC_CAN_QUEUE_PERIOD)))
366 		goto unlock;
367 
368 	if (time_before(jiffies, si->last_can_queue_ramp_down_time +
369 			FC_CAN_QUEUE_PERIOD))
370 		goto unlock;
371 
372 	si->last_can_queue_ramp_up_time = jiffies;
373 
374 	can_queue = lport->host->can_queue << 1;
375 	if (can_queue >= si->max_can_queue) {
376 		can_queue = si->max_can_queue;
377 		si->last_can_queue_ramp_down_time = 0;
378 	}
379 	lport->host->can_queue = can_queue;
380 	shost_printk(KERN_ERR, lport->host, "libfc: increased "
381 		     "can_queue to %d.\n", can_queue);
382 
383 unlock:
384 	spin_unlock_irqrestore(lport->host->host_lock, flags);
385 }
386 
387 /**
388  * fc_fcp_can_queue_ramp_down() - reduces can_queue
389  * @lport: lport to reduce can_queue
390  *
391  * If we are getting memory allocation failures, then we may
392  * be trying to execute too many commands. We let the running
393  * commands complete or timeout, then try again with a reduced
394  * can_queue. Eventually we will hit the point where we run
395  * on all reserved structs.
396  */
397 static bool fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
398 {
399 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
400 	unsigned long flags;
401 	int can_queue;
402 	bool changed = false;
403 
404 	spin_lock_irqsave(lport->host->host_lock, flags);
405 
406 	if (si->last_can_queue_ramp_down_time &&
407 	    (time_before(jiffies, si->last_can_queue_ramp_down_time +
408 			 FC_CAN_QUEUE_PERIOD)))
409 		goto unlock;
410 
411 	si->last_can_queue_ramp_down_time = jiffies;
412 
413 	can_queue = lport->host->can_queue;
414 	can_queue >>= 1;
415 	if (!can_queue)
416 		can_queue = 1;
417 	lport->host->can_queue = can_queue;
418 	changed = true;
419 
420 unlock:
421 	spin_unlock_irqrestore(lport->host->host_lock, flags);
422 	return changed;
423 }
424 
425 /*
426  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
427  * @lport:	fc lport struct
428  * @len:	payload length
429  *
430  * Allocates fc_frame structure and buffer but if fails to allocate
431  * then reduce can_queue.
432  */
433 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
434 						  size_t len)
435 {
436 	struct fc_frame *fp;
437 
438 	fp = fc_frame_alloc(lport, len);
439 	if (likely(fp))
440 		return fp;
441 
442 	per_cpu_ptr(lport->stats, get_cpu())->FcpFrameAllocFails++;
443 	put_cpu();
444 	/* error case */
445 	fc_fcp_can_queue_ramp_down(lport);
446 	shost_printk(KERN_ERR, lport->host,
447 		     "libfc: Could not allocate frame, "
448 		     "reducing can_queue to %d.\n", lport->host->can_queue);
449 	return NULL;
450 }
451 
452 /**
453  * get_fsp_rec_tov() - Helper function to get REC_TOV
454  * @fsp: the FCP packet
455  *
456  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
457  */
458 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
459 {
460 	struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
461 	unsigned int e_d_tov = FC_DEF_E_D_TOV;
462 
463 	if (rpriv && rpriv->e_d_tov > e_d_tov)
464 		e_d_tov = rpriv->e_d_tov;
465 	return msecs_to_jiffies(e_d_tov) + HZ;
466 }
467 
468 /**
469  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
470  * @fsp: The FCP packet the data is on
471  * @fp:	 The data frame
472  */
473 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
474 {
475 	struct scsi_cmnd *sc = fsp->cmd;
476 	struct fc_lport *lport = fsp->lp;
477 	struct fc_stats *stats;
478 	struct fc_frame_header *fh;
479 	size_t start_offset;
480 	size_t offset;
481 	u32 crc;
482 	u32 copy_len = 0;
483 	size_t len;
484 	void *buf;
485 	struct scatterlist *sg;
486 	u32 nents;
487 	u8 host_bcode = FC_COMPLETE;
488 
489 	fh = fc_frame_header_get(fp);
490 	offset = ntohl(fh->fh_parm_offset);
491 	start_offset = offset;
492 	len = fr_len(fp) - sizeof(*fh);
493 	buf = fc_frame_payload_get(fp, 0);
494 
495 	/*
496 	 * if this I/O is ddped then clear it and initiate recovery since data
497 	 * frames are expected to be placed directly in that case.
498 	 *
499 	 * Indicate error to scsi-ml because something went wrong with the
500 	 * ddp handling to get us here.
501 	 */
502 	if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
503 		fc_fcp_ddp_done(fsp);
504 		FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
505 		host_bcode = FC_ERROR;
506 		goto err;
507 	}
508 	if (offset + len > fsp->data_len) {
509 		/* this should never happen */
510 		if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
511 		    fc_frame_crc_check(fp))
512 			goto crc_err;
513 		FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
514 			   "data_len %x\n", len, offset, fsp->data_len);
515 
516 		/* Data is corrupted indicate scsi-ml should retry */
517 		host_bcode = FC_DATA_OVRRUN;
518 		goto err;
519 	}
520 	if (offset != fsp->xfer_len)
521 		fsp->state |= FC_SRB_DISCONTIG;
522 
523 	sg = scsi_sglist(sc);
524 	nents = scsi_sg_count(sc);
525 
526 	if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
527 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
528 						    &offset, NULL);
529 	} else {
530 		crc = crc32(~0, (u8 *) fh, sizeof(*fh));
531 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
532 						    &offset, &crc);
533 		buf = fc_frame_payload_get(fp, 0);
534 		if (len % 4)
535 			crc = crc32(crc, buf + len, 4 - (len % 4));
536 
537 		if (~crc != le32_to_cpu(fr_crc(fp))) {
538 crc_err:
539 			stats = per_cpu_ptr(lport->stats, get_cpu());
540 			stats->ErrorFrames++;
541 			/* per cpu count, not total count, but OK for limit */
542 			if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
543 				printk(KERN_WARNING "libfc: CRC error on data "
544 				       "frame for port (%6.6x)\n",
545 				       lport->port_id);
546 			put_cpu();
547 			/*
548 			 * Assume the frame is total garbage.
549 			 * We may have copied it over the good part
550 			 * of the buffer.
551 			 * If so, we need to retry the entire operation.
552 			 * Otherwise, ignore it.
553 			 */
554 			if (fsp->state & FC_SRB_DISCONTIG) {
555 				host_bcode = FC_CRC_ERROR;
556 				goto err;
557 			}
558 			return;
559 		}
560 	}
561 
562 	if (fsp->xfer_contig_end == start_offset)
563 		fsp->xfer_contig_end += copy_len;
564 	fsp->xfer_len += copy_len;
565 
566 	/*
567 	 * In the very rare event that this data arrived after the response
568 	 * and completes the transfer, call the completion handler.
569 	 */
570 	if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
571 	    fsp->xfer_len == fsp->data_len - fsp->scsi_resid) {
572 		FC_FCP_DBG( fsp, "complete out-of-order sequence\n" );
573 		fc_fcp_complete_locked(fsp);
574 	}
575 	return;
576 err:
577 	fc_fcp_recovery(fsp, host_bcode);
578 }
579 
580 /**
581  * fc_fcp_send_data() - Send SCSI data to a target
582  * @fsp:      The FCP packet the data is on
583  * @sp:	      The sequence the data is to be sent on
584  * @offset:   The starting offset for this data request
585  * @seq_blen: The burst length for this data request
586  *
587  * Called after receiving a Transfer Ready data descriptor.
588  * If the LLD is capable of sequence offload then send down the
589  * seq_blen amount of data in single frame, otherwise send
590  * multiple frames of the maximum frame payload supported by
591  * the target port.
592  */
593 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
594 			    size_t offset, size_t seq_blen)
595 {
596 	struct fc_exch *ep;
597 	struct scsi_cmnd *sc;
598 	struct scatterlist *sg;
599 	struct fc_frame *fp = NULL;
600 	struct fc_lport *lport = fsp->lp;
601 	struct page *page;
602 	size_t remaining;
603 	size_t t_blen;
604 	size_t tlen;
605 	size_t sg_bytes;
606 	size_t frame_offset, fh_parm_offset;
607 	size_t off;
608 	int error;
609 	void *data = NULL;
610 	void *page_addr;
611 	int using_sg = lport->sg_supp;
612 	u32 f_ctl;
613 
614 	WARN_ON(seq_blen <= 0);
615 	if (unlikely(offset + seq_blen > fsp->data_len)) {
616 		/* this should never happen */
617 		FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
618 			   "offset %zx\n", seq_blen, offset);
619 		fc_fcp_send_abort(fsp);
620 		return 0;
621 	} else if (offset != fsp->xfer_len) {
622 		/* Out of Order Data Request - no problem, but unexpected. */
623 		FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
624 			   "seq_blen %zx offset %zx\n", seq_blen, offset);
625 	}
626 
627 	/*
628 	 * if LLD is capable of seq_offload then set transport
629 	 * burst length (t_blen) to seq_blen, otherwise set t_blen
630 	 * to max FC frame payload previously set in fsp->max_payload.
631 	 */
632 	t_blen = fsp->max_payload;
633 	if (lport->seq_offload) {
634 		t_blen = min(seq_blen, (size_t)lport->lso_max);
635 		FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
636 			   fsp, seq_blen, lport->lso_max, t_blen);
637 	}
638 
639 	if (t_blen > 512)
640 		t_blen &= ~(512 - 1);	/* round down to block size */
641 	sc = fsp->cmd;
642 
643 	remaining = seq_blen;
644 	fh_parm_offset = frame_offset = offset;
645 	tlen = 0;
646 	seq = fc_seq_start_next(seq);
647 	f_ctl = FC_FC_REL_OFF;
648 	WARN_ON(!seq);
649 
650 	sg = scsi_sglist(sc);
651 
652 	while (remaining > 0 && sg) {
653 		if (offset >= sg->length) {
654 			offset -= sg->length;
655 			sg = sg_next(sg);
656 			continue;
657 		}
658 		if (!fp) {
659 			tlen = min(t_blen, remaining);
660 
661 			/*
662 			 * TODO.  Temporary workaround.	 fc_seq_send() can't
663 			 * handle odd lengths in non-linear skbs.
664 			 * This will be the final fragment only.
665 			 */
666 			if (tlen % 4)
667 				using_sg = 0;
668 			fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
669 			if (!fp)
670 				return -ENOMEM;
671 
672 			data = fc_frame_header_get(fp) + 1;
673 			fh_parm_offset = frame_offset;
674 			fr_max_payload(fp) = fsp->max_payload;
675 		}
676 
677 		off = offset + sg->offset;
678 		sg_bytes = min(tlen, sg->length - offset);
679 		sg_bytes = min(sg_bytes,
680 			       (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
681 		page = sg_page(sg) + (off >> PAGE_SHIFT);
682 		if (using_sg) {
683 			get_page(page);
684 			skb_fill_page_desc(fp_skb(fp),
685 					   skb_shinfo(fp_skb(fp))->nr_frags,
686 					   page, off & ~PAGE_MASK, sg_bytes);
687 			fp_skb(fp)->data_len += sg_bytes;
688 			fr_len(fp) += sg_bytes;
689 			fp_skb(fp)->truesize += PAGE_SIZE;
690 		} else {
691 			/*
692 			 * The scatterlist item may be bigger than PAGE_SIZE,
693 			 * but we must not cross pages inside the kmap.
694 			 */
695 			page_addr = kmap_atomic(page);
696 			memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
697 			       sg_bytes);
698 			kunmap_atomic(page_addr);
699 			data += sg_bytes;
700 		}
701 		offset += sg_bytes;
702 		frame_offset += sg_bytes;
703 		tlen -= sg_bytes;
704 		remaining -= sg_bytes;
705 
706 		if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
707 		    (tlen))
708 			continue;
709 
710 		/*
711 		 * Send sequence with transfer sequence initiative in case
712 		 * this is last FCP frame of the sequence.
713 		 */
714 		if (remaining == 0)
715 			f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
716 
717 		ep = fc_seq_exch(seq);
718 		fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
719 			       FC_TYPE_FCP, f_ctl, fh_parm_offset);
720 
721 		/*
722 		 * send fragment using for a sequence.
723 		 */
724 		error = fc_seq_send(lport, seq, fp);
725 		if (error) {
726 			WARN_ON(1);		/* send error should be rare */
727 			return error;
728 		}
729 		fp = NULL;
730 	}
731 	fsp->xfer_len += seq_blen;	/* premature count? */
732 	return 0;
733 }
734 
735 /**
736  * fc_fcp_abts_resp() - Receive an ABTS response
737  * @fsp: The FCP packet that is being aborted
738  * @fp:	 The response frame
739  */
740 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
741 {
742 	int ba_done = 1;
743 	struct fc_ba_rjt *brp;
744 	struct fc_frame_header *fh;
745 
746 	fh = fc_frame_header_get(fp);
747 	switch (fh->fh_r_ctl) {
748 	case FC_RCTL_BA_ACC:
749 		break;
750 	case FC_RCTL_BA_RJT:
751 		brp = fc_frame_payload_get(fp, sizeof(*brp));
752 		if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
753 			break;
754 		/* fall thru */
755 	default:
756 		/*
757 		 * we will let the command timeout
758 		 * and scsi-ml recover in this case,
759 		 * therefore cleared the ba_done flag.
760 		 */
761 		ba_done = 0;
762 	}
763 
764 	if (ba_done)
765 		fc_fcp_abort_done(fsp);
766 }
767 
768 /**
769  * fc_fcp_recv() - Receive an FCP frame
770  * @seq: The sequence the frame is on
771  * @fp:	 The received frame
772  * @arg: The related FCP packet
773  *
774  * Context: Called from Soft IRQ context. Can not be called
775  *	    holding the FCP packet list lock.
776  */
777 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
778 {
779 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
780 	struct fc_lport *lport = fsp->lp;
781 	struct fc_frame_header *fh;
782 	struct fcp_txrdy *dd;
783 	u8 r_ctl;
784 	int rc = 0;
785 
786 	if (IS_ERR(fp)) {
787 		fc_fcp_error(fsp, fp);
788 		return;
789 	}
790 
791 	fh = fc_frame_header_get(fp);
792 	r_ctl = fh->fh_r_ctl;
793 
794 	if (lport->state != LPORT_ST_READY) {
795 		FC_FCP_DBG(fsp, "lport state %d, ignoring r_ctl %x\n",
796 			   lport->state, r_ctl);
797 		goto out;
798 	}
799 	if (fc_fcp_lock_pkt(fsp))
800 		goto out;
801 
802 	if (fh->fh_type == FC_TYPE_BLS) {
803 		fc_fcp_abts_resp(fsp, fp);
804 		goto unlock;
805 	}
806 
807 	if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING)) {
808 		FC_FCP_DBG(fsp, "command aborted, ignoring r_ctl %x\n", r_ctl);
809 		goto unlock;
810 	}
811 
812 	if (r_ctl == FC_RCTL_DD_DATA_DESC) {
813 		/*
814 		 * received XFER RDY from the target
815 		 * need to send data to the target
816 		 */
817 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
818 		dd = fc_frame_payload_get(fp, sizeof(*dd));
819 		WARN_ON(!dd);
820 
821 		rc = fc_fcp_send_data(fsp, seq,
822 				      (size_t) ntohl(dd->ft_data_ro),
823 				      (size_t) ntohl(dd->ft_burst_len));
824 		if (!rc)
825 			seq->rec_data = fsp->xfer_len;
826 	} else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
827 		/*
828 		 * received a DATA frame
829 		 * next we will copy the data to the system buffer
830 		 */
831 		WARN_ON(fr_len(fp) < sizeof(*fh));	/* len may be 0 */
832 		fc_fcp_recv_data(fsp, fp);
833 		seq->rec_data = fsp->xfer_contig_end;
834 	} else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
835 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
836 
837 		fc_fcp_resp(fsp, fp);
838 	} else {
839 		FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
840 	}
841 unlock:
842 	fc_fcp_unlock_pkt(fsp);
843 out:
844 	fc_frame_free(fp);
845 }
846 
847 /**
848  * fc_fcp_resp() - Handler for FCP responses
849  * @fsp: The FCP packet the response is for
850  * @fp:	 The response frame
851  */
852 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
853 {
854 	struct fc_frame_header *fh;
855 	struct fcp_resp *fc_rp;
856 	struct fcp_resp_ext *rp_ex;
857 	struct fcp_resp_rsp_info *fc_rp_info;
858 	u32 plen;
859 	u32 expected_len;
860 	u32 respl = 0;
861 	u32 snsl = 0;
862 	u8 flags = 0;
863 
864 	plen = fr_len(fp);
865 	fh = (struct fc_frame_header *)fr_hdr(fp);
866 	if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
867 		goto len_err;
868 	plen -= sizeof(*fh);
869 	fc_rp = (struct fcp_resp *)(fh + 1);
870 	fsp->cdb_status = fc_rp->fr_status;
871 	flags = fc_rp->fr_flags;
872 	fsp->scsi_comp_flags = flags;
873 	expected_len = fsp->data_len;
874 
875 	/* if ddp, update xfer len */
876 	fc_fcp_ddp_done(fsp);
877 
878 	if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
879 		rp_ex = (void *)(fc_rp + 1);
880 		if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
881 			if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
882 				goto len_err;
883 			fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
884 			if (flags & FCP_RSP_LEN_VAL) {
885 				respl = ntohl(rp_ex->fr_rsp_len);
886 				if ((respl != FCP_RESP_RSP_INFO_LEN4) &&
887 				    (respl != FCP_RESP_RSP_INFO_LEN8))
888 					goto len_err;
889 				if (fsp->wait_for_comp) {
890 					/* Abuse cdb_status for rsp code */
891 					fsp->cdb_status = fc_rp_info->rsp_code;
892 					complete(&fsp->tm_done);
893 					/*
894 					 * tmfs will not have any scsi cmd so
895 					 * exit here
896 					 */
897 					return;
898 				}
899 			}
900 			if (flags & FCP_SNS_LEN_VAL) {
901 				snsl = ntohl(rp_ex->fr_sns_len);
902 				if (snsl > SCSI_SENSE_BUFFERSIZE)
903 					snsl = SCSI_SENSE_BUFFERSIZE;
904 				memcpy(fsp->cmd->sense_buffer,
905 				       (char *)fc_rp_info + respl, snsl);
906 			}
907 		}
908 		if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
909 			if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
910 				goto len_err;
911 			if (flags & FCP_RESID_UNDER) {
912 				fsp->scsi_resid = ntohl(rp_ex->fr_resid);
913 				/*
914 				 * The cmnd->underflow is the minimum number of
915 				 * bytes that must be transferred for this
916 				 * command.  Provided a sense condition is not
917 				 * present, make sure the actual amount
918 				 * transferred is at least the underflow value
919 				 * or fail.
920 				 */
921 				if (!(flags & FCP_SNS_LEN_VAL) &&
922 				    (fc_rp->fr_status == 0) &&
923 				    (scsi_bufflen(fsp->cmd) -
924 				     fsp->scsi_resid) < fsp->cmd->underflow)
925 					goto err;
926 				expected_len -= fsp->scsi_resid;
927 			} else {
928 				fsp->status_code = FC_ERROR;
929 			}
930 		}
931 	}
932 	fsp->state |= FC_SRB_RCV_STATUS;
933 
934 	/*
935 	 * Check for missing or extra data frames.
936 	 */
937 	if (unlikely(fsp->cdb_status == SAM_STAT_GOOD &&
938 		     fsp->xfer_len != expected_len)) {
939 		if (fsp->xfer_len < expected_len) {
940 			/*
941 			 * Some data may be queued locally,
942 			 * Wait a at least one jiffy to see if it is delivered.
943 			 * If this expires without data, we may do SRR.
944 			 */
945 			if (fsp->lp->qfull) {
946 				FC_FCP_DBG(fsp, "tgt %6.6x queue busy retry\n",
947 					   fsp->rport->port_id);
948 				return;
949 			}
950 			FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx data underrun "
951 				   "len %x, data len %x\n",
952 				   fsp->rport->port_id,
953 				   fsp->xfer_len, expected_len, fsp->data_len);
954 			fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
955 			return;
956 		}
957 		fsp->status_code = FC_DATA_OVRRUN;
958 		FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
959 			   "len %x, data len %x\n",
960 			   fsp->rport->port_id,
961 			   fsp->xfer_len, expected_len, fsp->data_len);
962 	}
963 	fc_fcp_complete_locked(fsp);
964 	return;
965 
966 len_err:
967 	FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
968 		   "snsl %u\n", flags, fr_len(fp), respl, snsl);
969 err:
970 	fsp->status_code = FC_ERROR;
971 	fc_fcp_complete_locked(fsp);
972 }
973 
974 /**
975  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
976  *			      fcp_pkt lock held
977  * @fsp: The FCP packet to be completed
978  *
979  * This function may sleep if a timer is pending. The packet lock must be
980  * held, and the host lock must not be held.
981  */
982 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
983 {
984 	struct fc_lport *lport = fsp->lp;
985 	struct fc_seq *seq;
986 	struct fc_exch *ep;
987 	u32 f_ctl;
988 
989 	if (fsp->state & FC_SRB_ABORT_PENDING)
990 		return;
991 
992 	if (fsp->state & FC_SRB_ABORTED) {
993 		if (!fsp->status_code)
994 			fsp->status_code = FC_CMD_ABORTED;
995 	} else {
996 		/*
997 		 * Test for transport underrun, independent of response
998 		 * underrun status.
999 		 */
1000 		if (fsp->cdb_status == SAM_STAT_GOOD &&
1001 		    fsp->xfer_len < fsp->data_len && !fsp->io_status &&
1002 		    (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
1003 		     fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
1004 			FC_FCP_DBG(fsp, "data underrun, xfer %zx data %x\n",
1005 				    fsp->xfer_len, fsp->data_len);
1006 			fsp->status_code = FC_DATA_UNDRUN;
1007 		}
1008 	}
1009 
1010 	seq = fsp->seq_ptr;
1011 	if (seq) {
1012 		fsp->seq_ptr = NULL;
1013 		if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
1014 			struct fc_frame *conf_frame;
1015 			struct fc_seq *csp;
1016 
1017 			csp = fc_seq_start_next(seq);
1018 			conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
1019 			if (conf_frame) {
1020 				f_ctl = FC_FC_SEQ_INIT;
1021 				f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
1022 				ep = fc_seq_exch(seq);
1023 				fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
1024 					       ep->did, ep->sid,
1025 					       FC_TYPE_FCP, f_ctl, 0);
1026 				fc_seq_send(lport, csp, conf_frame);
1027 			}
1028 		}
1029 		fc_exch_done(seq);
1030 	}
1031 	/*
1032 	 * Some resets driven by SCSI are not I/Os and do not have
1033 	 * SCSI commands associated with the requests. We should not
1034 	 * call I/O completion if we do not have a SCSI command.
1035 	 */
1036 	if (fsp->cmd)
1037 		fc_io_compl(fsp);
1038 }
1039 
1040 /**
1041  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
1042  * @fsp:   The FCP packet whose exchanges should be canceled
1043  * @error: The reason for the cancellation
1044  */
1045 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
1046 {
1047 	if (fsp->seq_ptr) {
1048 		fc_exch_done(fsp->seq_ptr);
1049 		fsp->seq_ptr = NULL;
1050 	}
1051 	fsp->status_code = error;
1052 }
1053 
1054 /**
1055  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1056  * @lport: The local port whose exchanges should be canceled
1057  * @id:	   The target's ID
1058  * @lun:   The LUN
1059  * @error: The reason for cancellation
1060  *
1061  * If lun or id is -1, they are ignored.
1062  */
1063 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1064 				    unsigned int lun, int error)
1065 {
1066 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1067 	struct fc_fcp_pkt *fsp;
1068 	struct scsi_cmnd *sc_cmd;
1069 	unsigned long flags;
1070 
1071 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1072 restart:
1073 	list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1074 		sc_cmd = fsp->cmd;
1075 		if (id != -1 && scmd_id(sc_cmd) != id)
1076 			continue;
1077 
1078 		if (lun != -1 && sc_cmd->device->lun != lun)
1079 			continue;
1080 
1081 		fc_fcp_pkt_hold(fsp);
1082 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1083 
1084 		spin_lock_bh(&fsp->scsi_pkt_lock);
1085 		if (!(fsp->state & FC_SRB_COMPL)) {
1086 			fsp->state |= FC_SRB_COMPL;
1087 			/*
1088 			 * TODO: dropping scsi_pkt_lock and then reacquiring
1089 			 * again around fc_fcp_cleanup_cmd() is required,
1090 			 * since fc_fcp_cleanup_cmd() calls into
1091 			 * fc_seq_set_resp() and that func preempts cpu using
1092 			 * schedule. May be schedule and related code should be
1093 			 * removed instead of unlocking here to avoid scheduling
1094 			 * while atomic bug.
1095 			 */
1096 			spin_unlock_bh(&fsp->scsi_pkt_lock);
1097 
1098 			fc_fcp_cleanup_cmd(fsp, error);
1099 
1100 			spin_lock_bh(&fsp->scsi_pkt_lock);
1101 			fc_io_compl(fsp);
1102 		}
1103 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1104 
1105 		fc_fcp_pkt_release(fsp);
1106 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1107 		/*
1108 		 * while we dropped the lock multiple pkts could
1109 		 * have been released, so we have to start over.
1110 		 */
1111 		goto restart;
1112 	}
1113 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1114 }
1115 
1116 /**
1117  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1118  * @lport: The local port whose exchanges are to be aborted
1119  */
1120 static void fc_fcp_abort_io(struct fc_lport *lport)
1121 {
1122 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1123 }
1124 
1125 /**
1126  * fc_fcp_pkt_send() - Send a fcp_pkt
1127  * @lport: The local port to send the FCP packet on
1128  * @fsp:   The FCP packet to send
1129  *
1130  * Return:  Zero for success and -1 for failure
1131  * Locks:   Called without locks held
1132  */
1133 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1134 {
1135 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1136 	unsigned long flags;
1137 	int rc;
1138 
1139 	fsp->cmd->SCp.ptr = (char *)fsp;
1140 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1141 	fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1142 
1143 	int_to_scsilun(fsp->cmd->device->lun, &fsp->cdb_cmd.fc_lun);
1144 	memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1145 
1146 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1147 	list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1148 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1149 	rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1150 	if (unlikely(rc)) {
1151 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1152 		fsp->cmd->SCp.ptr = NULL;
1153 		list_del(&fsp->list);
1154 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1155 	}
1156 
1157 	return rc;
1158 }
1159 
1160 /**
1161  * fc_fcp_cmd_send() - Send a FCP command
1162  * @lport: The local port to send the command on
1163  * @fsp:   The FCP packet the command is on
1164  * @resp:  The handler for the response
1165  */
1166 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1167 			   void (*resp)(struct fc_seq *,
1168 					struct fc_frame *fp,
1169 					void *arg))
1170 {
1171 	struct fc_frame *fp;
1172 	struct fc_seq *seq;
1173 	struct fc_rport *rport;
1174 	struct fc_rport_libfc_priv *rpriv;
1175 	const size_t len = sizeof(fsp->cdb_cmd);
1176 	int rc = 0;
1177 
1178 	if (fc_fcp_lock_pkt(fsp))
1179 		return 0;
1180 
1181 	fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1182 	if (!fp) {
1183 		rc = -1;
1184 		goto unlock;
1185 	}
1186 
1187 	memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1188 	fr_fsp(fp) = fsp;
1189 	rport = fsp->rport;
1190 	fsp->max_payload = rport->maxframe_size;
1191 	rpriv = rport->dd_data;
1192 
1193 	fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1194 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1195 		       FC_FCTL_REQ, 0);
1196 
1197 	seq = fc_exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy, fsp, 0);
1198 	if (!seq) {
1199 		rc = -1;
1200 		goto unlock;
1201 	}
1202 	fsp->seq_ptr = seq;
1203 	fc_fcp_pkt_hold(fsp);	/* hold for fc_fcp_pkt_destroy */
1204 
1205 	fsp->timer.function = fc_fcp_timeout;
1206 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1207 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1208 
1209 unlock:
1210 	fc_fcp_unlock_pkt(fsp);
1211 	return rc;
1212 }
1213 
1214 /**
1215  * fc_fcp_error() - Handler for FCP layer errors
1216  * @fsp: The FCP packet the error is on
1217  * @fp:	 The frame that has errored
1218  */
1219 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1220 {
1221 	int error = PTR_ERR(fp);
1222 
1223 	if (fc_fcp_lock_pkt(fsp))
1224 		return;
1225 
1226 	if (error == -FC_EX_CLOSED) {
1227 		fc_fcp_retry_cmd(fsp, FC_ERROR);
1228 		goto unlock;
1229 	}
1230 
1231 	/*
1232 	 * clear abort pending, because the lower layer
1233 	 * decided to force completion.
1234 	 */
1235 	fsp->state &= ~FC_SRB_ABORT_PENDING;
1236 	fsp->status_code = FC_CMD_PLOGO;
1237 	fc_fcp_complete_locked(fsp);
1238 unlock:
1239 	fc_fcp_unlock_pkt(fsp);
1240 }
1241 
1242 /**
1243  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1244  * @fsp:   The FCP packet to abort on
1245  *
1246  * Called to send an abort and then wait for abort completion
1247  */
1248 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1249 {
1250 	int rc = FAILED;
1251 	unsigned long ticks_left;
1252 
1253 	FC_FCP_DBG(fsp, "pkt abort state %x\n", fsp->state);
1254 	if (fc_fcp_send_abort(fsp)) {
1255 		FC_FCP_DBG(fsp, "failed to send abort\n");
1256 		return FAILED;
1257 	}
1258 
1259 	if (fsp->state & FC_SRB_ABORTED) {
1260 		FC_FCP_DBG(fsp, "target abort cmd  completed\n");
1261 		return SUCCESS;
1262 	}
1263 
1264 	init_completion(&fsp->tm_done);
1265 	fsp->wait_for_comp = 1;
1266 
1267 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1268 	ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1269 							FC_SCSI_TM_TOV);
1270 	spin_lock_bh(&fsp->scsi_pkt_lock);
1271 	fsp->wait_for_comp = 0;
1272 
1273 	if (!ticks_left) {
1274 		FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1275 	} else if (fsp->state & FC_SRB_ABORTED) {
1276 		FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1277 		rc = SUCCESS;
1278 		fc_fcp_complete_locked(fsp);
1279 	}
1280 
1281 	return rc;
1282 }
1283 
1284 /**
1285  * fc_lun_reset_send() - Send LUN reset command
1286  * @data: The FCP packet that identifies the LUN to be reset
1287  */
1288 static void fc_lun_reset_send(struct timer_list *t)
1289 {
1290 	struct fc_fcp_pkt *fsp = from_timer(fsp, t, timer);
1291 	struct fc_lport *lport = fsp->lp;
1292 
1293 	if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1294 		if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1295 			return;
1296 		if (fc_fcp_lock_pkt(fsp))
1297 			return;
1298 		fsp->timer.function = fc_lun_reset_send;
1299 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1300 		fc_fcp_unlock_pkt(fsp);
1301 	}
1302 }
1303 
1304 /**
1305  * fc_lun_reset() - Send a LUN RESET command to a device
1306  *		    and wait for the reply
1307  * @lport: The local port to sent the command on
1308  * @fsp:   The FCP packet that identifies the LUN to be reset
1309  * @id:	   The SCSI command ID
1310  * @lun:   The LUN ID to be reset
1311  */
1312 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1313 			unsigned int id, unsigned int lun)
1314 {
1315 	int rc;
1316 
1317 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1318 	fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1319 	int_to_scsilun(lun, &fsp->cdb_cmd.fc_lun);
1320 
1321 	fsp->wait_for_comp = 1;
1322 	init_completion(&fsp->tm_done);
1323 
1324 	fc_lun_reset_send(&fsp->timer);
1325 
1326 	/*
1327 	 * wait for completion of reset
1328 	 * after that make sure all commands are terminated
1329 	 */
1330 	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1331 
1332 	spin_lock_bh(&fsp->scsi_pkt_lock);
1333 	fsp->state |= FC_SRB_COMPL;
1334 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1335 
1336 	del_timer_sync(&fsp->timer);
1337 
1338 	spin_lock_bh(&fsp->scsi_pkt_lock);
1339 	if (fsp->seq_ptr) {
1340 		fc_exch_done(fsp->seq_ptr);
1341 		fsp->seq_ptr = NULL;
1342 	}
1343 	fsp->wait_for_comp = 0;
1344 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1345 
1346 	if (!rc) {
1347 		FC_SCSI_DBG(lport, "lun reset failed\n");
1348 		return FAILED;
1349 	}
1350 
1351 	/* cdb_status holds the tmf's rsp code */
1352 	if (fsp->cdb_status != FCP_TMF_CMPL)
1353 		return FAILED;
1354 
1355 	FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1356 	fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1357 	return SUCCESS;
1358 }
1359 
1360 /**
1361  * fc_tm_done() - Task Management response handler
1362  * @seq: The sequence that the response is on
1363  * @fp:	 The response frame
1364  * @arg: The FCP packet the response is for
1365  */
1366 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1367 {
1368 	struct fc_fcp_pkt *fsp = arg;
1369 	struct fc_frame_header *fh;
1370 
1371 	if (IS_ERR(fp)) {
1372 		/*
1373 		 * If there is an error just let it timeout or wait
1374 		 * for TMF to be aborted if it timedout.
1375 		 *
1376 		 * scsi-eh will escalate for when either happens.
1377 		 */
1378 		return;
1379 	}
1380 
1381 	if (fc_fcp_lock_pkt(fsp))
1382 		goto out;
1383 
1384 	/*
1385 	 * raced with eh timeout handler.
1386 	 */
1387 	if (!fsp->seq_ptr || !fsp->wait_for_comp)
1388 		goto out_unlock;
1389 
1390 	fh = fc_frame_header_get(fp);
1391 	if (fh->fh_type != FC_TYPE_BLS)
1392 		fc_fcp_resp(fsp, fp);
1393 	fsp->seq_ptr = NULL;
1394 	fc_exch_done(seq);
1395 out_unlock:
1396 	fc_fcp_unlock_pkt(fsp);
1397 out:
1398 	fc_frame_free(fp);
1399 }
1400 
1401 /**
1402  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1403  * @lport: The local port to be cleaned up
1404  */
1405 static void fc_fcp_cleanup(struct fc_lport *lport)
1406 {
1407 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1408 }
1409 
1410 /**
1411  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1412  * @data: The FCP packet that has timed out
1413  *
1414  * If REC is supported then just issue it and return. The REC exchange will
1415  * complete or time out and recovery can continue at that point. Otherwise,
1416  * if the response has been received without all the data it has been
1417  * ER_TIMEOUT since the response was received. If the response has not been
1418  * received we see if data was received recently. If it has been then we
1419  * continue waiting, otherwise, we abort the command.
1420  */
1421 static void fc_fcp_timeout(struct timer_list *t)
1422 {
1423 	struct fc_fcp_pkt *fsp = from_timer(fsp, t, timer);
1424 	struct fc_rport *rport = fsp->rport;
1425 	struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1426 
1427 	if (fc_fcp_lock_pkt(fsp))
1428 		return;
1429 
1430 	if (fsp->cdb_cmd.fc_tm_flags)
1431 		goto unlock;
1432 
1433 	if (fsp->lp->qfull) {
1434 		FC_FCP_DBG(fsp, "fcp timeout, resetting timer delay %d\n",
1435 			   fsp->timer_delay);
1436 		fsp->timer.function = fc_fcp_timeout;
1437 		fc_fcp_timer_set(fsp, fsp->timer_delay);
1438 		goto unlock;
1439 	}
1440 	FC_FCP_DBG(fsp, "fcp timeout, delay %d flags %x state %x\n",
1441 		   fsp->timer_delay, rpriv->flags, fsp->state);
1442 	fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1443 
1444 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1445 		fc_fcp_rec(fsp);
1446 	else if (fsp->state & FC_SRB_RCV_STATUS)
1447 		fc_fcp_complete_locked(fsp);
1448 	else
1449 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1450 	fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1451 unlock:
1452 	fc_fcp_unlock_pkt(fsp);
1453 }
1454 
1455 /**
1456  * fc_fcp_rec() - Send a REC ELS request
1457  * @fsp: The FCP packet to send the REC request on
1458  */
1459 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1460 {
1461 	struct fc_lport *lport;
1462 	struct fc_frame *fp;
1463 	struct fc_rport *rport;
1464 	struct fc_rport_libfc_priv *rpriv;
1465 
1466 	lport = fsp->lp;
1467 	rport = fsp->rport;
1468 	rpriv = rport->dd_data;
1469 	if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1470 		fsp->status_code = FC_HRD_ERROR;
1471 		fsp->io_status = 0;
1472 		fc_fcp_complete_locked(fsp);
1473 		return;
1474 	}
1475 
1476 	fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1477 	if (!fp)
1478 		goto retry;
1479 
1480 	fr_seq(fp) = fsp->seq_ptr;
1481 	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1482 		       rpriv->local_port->port_id, FC_TYPE_ELS,
1483 		       FC_FCTL_REQ, 0);
1484 	if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1485 				 fc_fcp_rec_resp, fsp,
1486 				 2 * lport->r_a_tov)) {
1487 		fc_fcp_pkt_hold(fsp);		/* hold while REC outstanding */
1488 		return;
1489 	}
1490 retry:
1491 	if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1492 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1493 	else
1494 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1495 }
1496 
1497 /**
1498  * fc_fcp_rec_resp() - Handler for REC ELS responses
1499  * @seq: The sequence the response is on
1500  * @fp:	 The response frame
1501  * @arg: The FCP packet the response is on
1502  *
1503  * If the response is a reject then the scsi layer will handle
1504  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1505  * set the timeout and return. If the I/O was completed then complete the
1506  * exchange and tell the SCSI layer.
1507  */
1508 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1509 {
1510 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1511 	struct fc_els_rec_acc *recp;
1512 	struct fc_els_ls_rjt *rjt;
1513 	u32 e_stat;
1514 	u8 opcode;
1515 	u32 offset;
1516 	enum dma_data_direction data_dir;
1517 	enum fc_rctl r_ctl;
1518 	struct fc_rport_libfc_priv *rpriv;
1519 
1520 	if (IS_ERR(fp)) {
1521 		fc_fcp_rec_error(fsp, fp);
1522 		return;
1523 	}
1524 
1525 	if (fc_fcp_lock_pkt(fsp))
1526 		goto out;
1527 
1528 	fsp->recov_retry = 0;
1529 	opcode = fc_frame_payload_op(fp);
1530 	if (opcode == ELS_LS_RJT) {
1531 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1532 		switch (rjt->er_reason) {
1533 		default:
1534 			FC_FCP_DBG(fsp,
1535 				   "device %x invalid REC reject %d/%d\n",
1536 				   fsp->rport->port_id, rjt->er_reason,
1537 				   rjt->er_explan);
1538 			/* fall through */
1539 		case ELS_RJT_UNSUP:
1540 			FC_FCP_DBG(fsp, "device does not support REC\n");
1541 			rpriv = fsp->rport->dd_data;
1542 			/*
1543 			 * if we do not spport RECs or got some bogus
1544 			 * reason then resetup timer so we check for
1545 			 * making progress.
1546 			 */
1547 			rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1548 			break;
1549 		case ELS_RJT_LOGIC:
1550 		case ELS_RJT_UNAB:
1551 			FC_FCP_DBG(fsp, "device %x REC reject %d/%d\n",
1552 				   fsp->rport->port_id, rjt->er_reason,
1553 				   rjt->er_explan);
1554 			/*
1555 			 * If response got lost or is stuck in the
1556 			 * queue somewhere we have no idea if and when
1557 			 * the response will be received. So quarantine
1558 			 * the xid and retry the command.
1559 			 */
1560 			if (rjt->er_explan == ELS_EXPL_OXID_RXID) {
1561 				struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1562 				ep->state |= FC_EX_QUARANTINE;
1563 				fsp->state |= FC_SRB_ABORTED;
1564 				fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1565 				break;
1566 			}
1567 			fc_fcp_recovery(fsp, FC_TRANS_RESET);
1568 			break;
1569 		}
1570 	} else if (opcode == ELS_LS_ACC) {
1571 		if (fsp->state & FC_SRB_ABORTED)
1572 			goto unlock_out;
1573 
1574 		data_dir = fsp->cmd->sc_data_direction;
1575 		recp = fc_frame_payload_get(fp, sizeof(*recp));
1576 		offset = ntohl(recp->reca_fc4value);
1577 		e_stat = ntohl(recp->reca_e_stat);
1578 
1579 		if (e_stat & ESB_ST_COMPLETE) {
1580 
1581 			/*
1582 			 * The exchange is complete.
1583 			 *
1584 			 * For output, we must've lost the response.
1585 			 * For input, all data must've been sent.
1586 			 * We lost may have lost the response
1587 			 * (and a confirmation was requested) and maybe
1588 			 * some data.
1589 			 *
1590 			 * If all data received, send SRR
1591 			 * asking for response.	 If partial data received,
1592 			 * or gaps, SRR requests data at start of gap.
1593 			 * Recovery via SRR relies on in-order-delivery.
1594 			 */
1595 			if (data_dir == DMA_TO_DEVICE) {
1596 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1597 			} else if (fsp->xfer_contig_end == offset) {
1598 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1599 			} else {
1600 				offset = fsp->xfer_contig_end;
1601 				r_ctl = FC_RCTL_DD_SOL_DATA;
1602 			}
1603 			fc_fcp_srr(fsp, r_ctl, offset);
1604 		} else if (e_stat & ESB_ST_SEQ_INIT) {
1605 			/*
1606 			 * The remote port has the initiative, so just
1607 			 * keep waiting for it to complete.
1608 			 */
1609 			fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1610 		} else {
1611 
1612 			/*
1613 			 * The exchange is incomplete, we have seq. initiative.
1614 			 * Lost response with requested confirmation,
1615 			 * lost confirmation, lost transfer ready or
1616 			 * lost write data.
1617 			 *
1618 			 * For output, if not all data was received, ask
1619 			 * for transfer ready to be repeated.
1620 			 *
1621 			 * If we received or sent all the data, send SRR to
1622 			 * request response.
1623 			 *
1624 			 * If we lost a response, we may have lost some read
1625 			 * data as well.
1626 			 */
1627 			r_ctl = FC_RCTL_DD_SOL_DATA;
1628 			if (data_dir == DMA_TO_DEVICE) {
1629 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1630 				if (offset < fsp->data_len)
1631 					r_ctl = FC_RCTL_DD_DATA_DESC;
1632 			} else if (offset == fsp->xfer_contig_end) {
1633 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1634 			} else if (fsp->xfer_contig_end < offset) {
1635 				offset = fsp->xfer_contig_end;
1636 			}
1637 			fc_fcp_srr(fsp, r_ctl, offset);
1638 		}
1639 	}
1640 unlock_out:
1641 	fc_fcp_unlock_pkt(fsp);
1642 out:
1643 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1644 	fc_frame_free(fp);
1645 }
1646 
1647 /**
1648  * fc_fcp_rec_error() - Handler for REC errors
1649  * @fsp: The FCP packet the error is on
1650  * @fp:	 The REC frame
1651  */
1652 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1653 {
1654 	int error = PTR_ERR(fp);
1655 
1656 	if (fc_fcp_lock_pkt(fsp))
1657 		goto out;
1658 
1659 	switch (error) {
1660 	case -FC_EX_CLOSED:
1661 		FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange closed\n",
1662 			   fsp, fsp->rport->port_id);
1663 		fc_fcp_retry_cmd(fsp, FC_ERROR);
1664 		break;
1665 
1666 	default:
1667 		FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1668 			   fsp, fsp->rport->port_id, error);
1669 		fsp->status_code = FC_CMD_PLOGO;
1670 		/* fall through */
1671 
1672 	case -FC_EX_TIMEOUT:
1673 		/*
1674 		 * Assume REC or LS_ACC was lost.
1675 		 * The exchange manager will have aborted REC, so retry.
1676 		 */
1677 		FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange timeout retry %d/%d\n",
1678 			   fsp, fsp->rport->port_id, fsp->recov_retry,
1679 			   FC_MAX_RECOV_RETRY);
1680 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1681 			fc_fcp_rec(fsp);
1682 		else
1683 			fc_fcp_recovery(fsp, FC_ERROR);
1684 		break;
1685 	}
1686 	fc_fcp_unlock_pkt(fsp);
1687 out:
1688 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1689 }
1690 
1691 /**
1692  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1693  * @fsp: The FCP pkt that needs to be aborted
1694  */
1695 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1696 {
1697 	FC_FCP_DBG(fsp, "start recovery code %x\n", code);
1698 	fsp->status_code = code;
1699 	fsp->cdb_status = 0;
1700 	fsp->io_status = 0;
1701 	/*
1702 	 * if this fails then we let the scsi command timer fire and
1703 	 * scsi-ml escalate.
1704 	 */
1705 	fc_fcp_send_abort(fsp);
1706 }
1707 
1708 /**
1709  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1710  * @fsp:   The FCP packet the SRR is to be sent on
1711  * @r_ctl: The R_CTL field for the SRR request
1712  * This is called after receiving status but insufficient data, or
1713  * when expecting status but the request has timed out.
1714  */
1715 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1716 {
1717 	struct fc_lport *lport = fsp->lp;
1718 	struct fc_rport *rport;
1719 	struct fc_rport_libfc_priv *rpriv;
1720 	struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1721 	struct fc_seq *seq;
1722 	struct fcp_srr *srr;
1723 	struct fc_frame *fp;
1724 
1725 	rport = fsp->rport;
1726 	rpriv = rport->dd_data;
1727 
1728 	if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1729 	    rpriv->rp_state != RPORT_ST_READY)
1730 		goto retry;			/* shouldn't happen */
1731 	fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1732 	if (!fp)
1733 		goto retry;
1734 
1735 	srr = fc_frame_payload_get(fp, sizeof(*srr));
1736 	memset(srr, 0, sizeof(*srr));
1737 	srr->srr_op = ELS_SRR;
1738 	srr->srr_ox_id = htons(ep->oxid);
1739 	srr->srr_rx_id = htons(ep->rxid);
1740 	srr->srr_r_ctl = r_ctl;
1741 	srr->srr_rel_off = htonl(offset);
1742 
1743 	fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1744 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1745 		       FC_FCTL_REQ, 0);
1746 
1747 	seq = fc_exch_seq_send(lport, fp, fc_fcp_srr_resp,
1748 			       fc_fcp_pkt_destroy,
1749 			       fsp, get_fsp_rec_tov(fsp));
1750 	if (!seq)
1751 		goto retry;
1752 
1753 	fsp->recov_seq = seq;
1754 	fsp->xfer_len = offset;
1755 	fsp->xfer_contig_end = offset;
1756 	fsp->state &= ~FC_SRB_RCV_STATUS;
1757 	fc_fcp_pkt_hold(fsp);		/* hold for outstanding SRR */
1758 	return;
1759 retry:
1760 	fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1761 }
1762 
1763 /**
1764  * fc_fcp_srr_resp() - Handler for SRR response
1765  * @seq: The sequence the SRR is on
1766  * @fp:	 The SRR frame
1767  * @arg: The FCP packet the SRR is on
1768  */
1769 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1770 {
1771 	struct fc_fcp_pkt *fsp = arg;
1772 	struct fc_frame_header *fh;
1773 
1774 	if (IS_ERR(fp)) {
1775 		fc_fcp_srr_error(fsp, fp);
1776 		return;
1777 	}
1778 
1779 	if (fc_fcp_lock_pkt(fsp))
1780 		goto out;
1781 
1782 	fh = fc_frame_header_get(fp);
1783 	/*
1784 	 * BUG? fc_fcp_srr_error calls fc_exch_done which would release
1785 	 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1786 	 * then fc_exch_timeout would be sending an abort. The fc_exch_done
1787 	 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1788 	 * an abort response though.
1789 	 */
1790 	if (fh->fh_type == FC_TYPE_BLS) {
1791 		fc_fcp_unlock_pkt(fsp);
1792 		return;
1793 	}
1794 
1795 	switch (fc_frame_payload_op(fp)) {
1796 	case ELS_LS_ACC:
1797 		fsp->recov_retry = 0;
1798 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1799 		break;
1800 	case ELS_LS_RJT:
1801 	default:
1802 		fc_fcp_recovery(fsp, FC_ERROR);
1803 		break;
1804 	}
1805 	fc_fcp_unlock_pkt(fsp);
1806 out:
1807 	fc_exch_done(seq);
1808 	fc_frame_free(fp);
1809 }
1810 
1811 /**
1812  * fc_fcp_srr_error() - Handler for SRR errors
1813  * @fsp: The FCP packet that the SRR error is on
1814  * @fp:	 The SRR frame
1815  */
1816 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1817 {
1818 	if (fc_fcp_lock_pkt(fsp))
1819 		goto out;
1820 	switch (PTR_ERR(fp)) {
1821 	case -FC_EX_TIMEOUT:
1822 		FC_FCP_DBG(fsp, "SRR timeout, retries %d\n", fsp->recov_retry);
1823 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1824 			fc_fcp_rec(fsp);
1825 		else
1826 			fc_fcp_recovery(fsp, FC_TIMED_OUT);
1827 		break;
1828 	case -FC_EX_CLOSED:			/* e.g., link failure */
1829 		FC_FCP_DBG(fsp, "SRR error, exchange closed\n");
1830 		/* fall through */
1831 	default:
1832 		fc_fcp_retry_cmd(fsp, FC_ERROR);
1833 		break;
1834 	}
1835 	fc_fcp_unlock_pkt(fsp);
1836 out:
1837 	fc_exch_done(fsp->recov_seq);
1838 }
1839 
1840 /**
1841  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1842  * @lport: The local port to be checked
1843  */
1844 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1845 {
1846 	/* lock ? */
1847 	return (lport->state == LPORT_ST_READY) &&
1848 		lport->link_up && !lport->qfull;
1849 }
1850 
1851 /**
1852  * fc_queuecommand() - The queuecommand function of the SCSI template
1853  * @shost: The Scsi_Host that the command was issued to
1854  * @cmd:   The scsi_cmnd to be executed
1855  *
1856  * This is the i/o strategy routine, called by the SCSI layer.
1857  */
1858 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1859 {
1860 	struct fc_lport *lport = shost_priv(shost);
1861 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1862 	struct fc_fcp_pkt *fsp;
1863 	int rval;
1864 	int rc = 0;
1865 	struct fc_stats *stats;
1866 
1867 	rval = fc_remote_port_chkready(rport);
1868 	if (rval) {
1869 		sc_cmd->result = rval;
1870 		sc_cmd->scsi_done(sc_cmd);
1871 		return 0;
1872 	}
1873 
1874 	if (!*(struct fc_remote_port **)rport->dd_data) {
1875 		/*
1876 		 * rport is transitioning from blocked/deleted to
1877 		 * online
1878 		 */
1879 		sc_cmd->result = DID_IMM_RETRY << 16;
1880 		sc_cmd->scsi_done(sc_cmd);
1881 		goto out;
1882 	}
1883 
1884 	if (!fc_fcp_lport_queue_ready(lport)) {
1885 		if (lport->qfull) {
1886 			if (fc_fcp_can_queue_ramp_down(lport))
1887 				shost_printk(KERN_ERR, lport->host,
1888 					     "libfc: queue full, "
1889 					     "reducing can_queue to %d.\n",
1890 					     lport->host->can_queue);
1891 		}
1892 		rc = SCSI_MLQUEUE_HOST_BUSY;
1893 		goto out;
1894 	}
1895 
1896 	fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1897 	if (fsp == NULL) {
1898 		rc = SCSI_MLQUEUE_HOST_BUSY;
1899 		goto out;
1900 	}
1901 
1902 	/*
1903 	 * build the libfc request pkt
1904 	 */
1905 	fsp->cmd = sc_cmd;	/* save the cmd */
1906 	fsp->rport = rport;	/* set the remote port ptr */
1907 
1908 	/*
1909 	 * set up the transfer length
1910 	 */
1911 	fsp->data_len = scsi_bufflen(sc_cmd);
1912 	fsp->xfer_len = 0;
1913 
1914 	/*
1915 	 * setup the data direction
1916 	 */
1917 	stats = per_cpu_ptr(lport->stats, get_cpu());
1918 	if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1919 		fsp->req_flags = FC_SRB_READ;
1920 		stats->InputRequests++;
1921 		stats->InputBytes += fsp->data_len;
1922 	} else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1923 		fsp->req_flags = FC_SRB_WRITE;
1924 		stats->OutputRequests++;
1925 		stats->OutputBytes += fsp->data_len;
1926 	} else {
1927 		fsp->req_flags = 0;
1928 		stats->ControlRequests++;
1929 	}
1930 	put_cpu();
1931 
1932 	/*
1933 	 * send it to the lower layer
1934 	 * if we get -1 return then put the request in the pending
1935 	 * queue.
1936 	 */
1937 	rval = fc_fcp_pkt_send(lport, fsp);
1938 	if (rval != 0) {
1939 		fsp->state = FC_SRB_FREE;
1940 		fc_fcp_pkt_release(fsp);
1941 		rc = SCSI_MLQUEUE_HOST_BUSY;
1942 	}
1943 out:
1944 	return rc;
1945 }
1946 EXPORT_SYMBOL(fc_queuecommand);
1947 
1948 /**
1949  * fc_io_compl() - Handle responses for completed commands
1950  * @fsp: The FCP packet that is complete
1951  *
1952  * Translates fcp_pkt errors to a Linux SCSI errors.
1953  * The fcp packet lock must be held when calling.
1954  */
1955 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1956 {
1957 	struct fc_fcp_internal *si;
1958 	struct scsi_cmnd *sc_cmd;
1959 	struct fc_lport *lport;
1960 	unsigned long flags;
1961 
1962 	/* release outstanding ddp context */
1963 	fc_fcp_ddp_done(fsp);
1964 
1965 	fsp->state |= FC_SRB_COMPL;
1966 	if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1967 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1968 		del_timer_sync(&fsp->timer);
1969 		spin_lock_bh(&fsp->scsi_pkt_lock);
1970 	}
1971 
1972 	lport = fsp->lp;
1973 	si = fc_get_scsi_internal(lport);
1974 
1975 	/*
1976 	 * if can_queue ramp down is done then try can_queue ramp up
1977 	 * since commands are completing now.
1978 	 */
1979 	if (si->last_can_queue_ramp_down_time)
1980 		fc_fcp_can_queue_ramp_up(lport);
1981 
1982 	sc_cmd = fsp->cmd;
1983 	CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1984 	switch (fsp->status_code) {
1985 	case FC_COMPLETE:
1986 		if (fsp->cdb_status == 0) {
1987 			/*
1988 			 * good I/O status
1989 			 */
1990 			sc_cmd->result = DID_OK << 16;
1991 			if (fsp->scsi_resid)
1992 				CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1993 		} else {
1994 			/*
1995 			 * transport level I/O was ok but scsi
1996 			 * has non zero status
1997 			 */
1998 			sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1999 		}
2000 		break;
2001 	case FC_ERROR:
2002 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2003 			   "due to FC_ERROR\n");
2004 		sc_cmd->result = DID_ERROR << 16;
2005 		break;
2006 	case FC_DATA_UNDRUN:
2007 		if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
2008 			/*
2009 			 * scsi status is good but transport level
2010 			 * underrun.
2011 			 */
2012 			if (fsp->state & FC_SRB_RCV_STATUS) {
2013 				sc_cmd->result = DID_OK << 16;
2014 			} else {
2015 				FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
2016 					   " due to FC_DATA_UNDRUN (trans)\n");
2017 				sc_cmd->result = DID_ERROR << 16;
2018 			}
2019 		} else {
2020 			/*
2021 			 * scsi got underrun, this is an error
2022 			 */
2023 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2024 				   "due to FC_DATA_UNDRUN (scsi)\n");
2025 			CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
2026 			sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2027 		}
2028 		break;
2029 	case FC_DATA_OVRRUN:
2030 		/*
2031 		 * overrun is an error
2032 		 */
2033 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2034 			   "due to FC_DATA_OVRRUN\n");
2035 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2036 		break;
2037 	case FC_CMD_ABORTED:
2038 		if (host_byte(sc_cmd->result) == DID_TIME_OUT)
2039 			FC_FCP_DBG(fsp, "Returning DID_TIME_OUT to scsi-ml "
2040 				   "due to FC_CMD_ABORTED\n");
2041 		else {
2042 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2043 				   "due to FC_CMD_ABORTED\n");
2044 			set_host_byte(sc_cmd, DID_ERROR);
2045 		}
2046 		sc_cmd->result |= fsp->io_status;
2047 		break;
2048 	case FC_CMD_RESET:
2049 		FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
2050 			   "due to FC_CMD_RESET\n");
2051 		sc_cmd->result = (DID_RESET << 16);
2052 		break;
2053 	case FC_TRANS_RESET:
2054 		FC_FCP_DBG(fsp, "Returning DID_SOFT_ERROR to scsi-ml "
2055 			   "due to FC_TRANS_RESET\n");
2056 		sc_cmd->result = (DID_SOFT_ERROR << 16);
2057 		break;
2058 	case FC_HRD_ERROR:
2059 		FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
2060 			   "due to FC_HRD_ERROR\n");
2061 		sc_cmd->result = (DID_NO_CONNECT << 16);
2062 		break;
2063 	case FC_CRC_ERROR:
2064 		FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
2065 			   "due to FC_CRC_ERROR\n");
2066 		sc_cmd->result = (DID_PARITY << 16);
2067 		break;
2068 	case FC_TIMED_OUT:
2069 		FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
2070 			   "due to FC_TIMED_OUT\n");
2071 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
2072 		break;
2073 	default:
2074 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2075 			   "due to unknown error\n");
2076 		sc_cmd->result = (DID_ERROR << 16);
2077 		break;
2078 	}
2079 
2080 	if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2081 		sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2082 
2083 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2084 	list_del(&fsp->list);
2085 	sc_cmd->SCp.ptr = NULL;
2086 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2087 	sc_cmd->scsi_done(sc_cmd);
2088 
2089 	/* release ref from initial allocation in queue command */
2090 	fc_fcp_pkt_release(fsp);
2091 }
2092 
2093 /**
2094  * fc_eh_abort() - Abort a command
2095  * @sc_cmd: The SCSI command to abort
2096  *
2097  * From SCSI host template.
2098  * Send an ABTS to the target device and wait for the response.
2099  */
2100 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2101 {
2102 	struct fc_fcp_pkt *fsp;
2103 	struct fc_lport *lport;
2104 	struct fc_fcp_internal *si;
2105 	int rc = FAILED;
2106 	unsigned long flags;
2107 	int rval;
2108 
2109 	rval = fc_block_scsi_eh(sc_cmd);
2110 	if (rval)
2111 		return rval;
2112 
2113 	lport = shost_priv(sc_cmd->device->host);
2114 	if (lport->state != LPORT_ST_READY)
2115 		return rc;
2116 	else if (!lport->link_up)
2117 		return rc;
2118 
2119 	si = fc_get_scsi_internal(lport);
2120 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2121 	fsp = CMD_SP(sc_cmd);
2122 	if (!fsp) {
2123 		/* command completed while scsi eh was setting up */
2124 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2125 		return SUCCESS;
2126 	}
2127 	/* grab a ref so the fsp and sc_cmd cannot be released from under us */
2128 	fc_fcp_pkt_hold(fsp);
2129 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2130 
2131 	if (fc_fcp_lock_pkt(fsp)) {
2132 		/* completed while we were waiting for timer to be deleted */
2133 		rc = SUCCESS;
2134 		goto release_pkt;
2135 	}
2136 
2137 	rc = fc_fcp_pkt_abort(fsp);
2138 	fc_fcp_unlock_pkt(fsp);
2139 
2140 release_pkt:
2141 	fc_fcp_pkt_release(fsp);
2142 	return rc;
2143 }
2144 EXPORT_SYMBOL(fc_eh_abort);
2145 
2146 /**
2147  * fc_eh_device_reset() - Reset a single LUN
2148  * @sc_cmd: The SCSI command which identifies the device whose
2149  *	    LUN is to be reset
2150  *
2151  * Set from SCSI host template.
2152  */
2153 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2154 {
2155 	struct fc_lport *lport;
2156 	struct fc_fcp_pkt *fsp;
2157 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2158 	int rc = FAILED;
2159 	int rval;
2160 
2161 	rval = fc_block_scsi_eh(sc_cmd);
2162 	if (rval)
2163 		return rval;
2164 
2165 	lport = shost_priv(sc_cmd->device->host);
2166 
2167 	if (lport->state != LPORT_ST_READY)
2168 		return rc;
2169 
2170 	FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2171 
2172 	fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2173 	if (fsp == NULL) {
2174 		printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2175 		goto out;
2176 	}
2177 
2178 	/*
2179 	 * Build the libfc request pkt. Do not set the scsi cmnd, because
2180 	 * the sc passed in is not setup for execution like when sent
2181 	 * through the queuecommand callout.
2182 	 */
2183 	fsp->rport = rport;	/* set the remote port ptr */
2184 
2185 	/*
2186 	 * flush outstanding commands
2187 	 */
2188 	rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2189 	fsp->state = FC_SRB_FREE;
2190 	fc_fcp_pkt_release(fsp);
2191 
2192 out:
2193 	return rc;
2194 }
2195 EXPORT_SYMBOL(fc_eh_device_reset);
2196 
2197 /**
2198  * fc_eh_host_reset() - Reset a Scsi_Host.
2199  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2200  */
2201 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2202 {
2203 	struct Scsi_Host *shost = sc_cmd->device->host;
2204 	struct fc_lport *lport = shost_priv(shost);
2205 	unsigned long wait_tmo;
2206 
2207 	FC_SCSI_DBG(lport, "Resetting host\n");
2208 
2209 	fc_lport_reset(lport);
2210 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2211 	while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2212 							       wait_tmo))
2213 		msleep(1000);
2214 
2215 	if (fc_fcp_lport_queue_ready(lport)) {
2216 		shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2217 			     "on port (%6.6x)\n", lport->port_id);
2218 		return SUCCESS;
2219 	} else {
2220 		shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2221 			     "port (%6.6x) is not ready.\n",
2222 			     lport->port_id);
2223 		return FAILED;
2224 	}
2225 }
2226 EXPORT_SYMBOL(fc_eh_host_reset);
2227 
2228 /**
2229  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2230  * @sdev: The SCSI device that identifies the SCSI host
2231  *
2232  * Configures queue depth based on host's cmd_per_len. If not set
2233  * then we use the libfc default.
2234  */
2235 int fc_slave_alloc(struct scsi_device *sdev)
2236 {
2237 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2238 
2239 	if (!rport || fc_remote_port_chkready(rport))
2240 		return -ENXIO;
2241 
2242 	scsi_change_queue_depth(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2243 	return 0;
2244 }
2245 EXPORT_SYMBOL(fc_slave_alloc);
2246 
2247 /**
2248  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2249  * @lport: The local port that no longer needs the FCP layer
2250  */
2251 void fc_fcp_destroy(struct fc_lport *lport)
2252 {
2253 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2254 
2255 	if (!list_empty(&si->scsi_pkt_queue))
2256 		printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2257 		       "port (%6.6x)\n", lport->port_id);
2258 
2259 	mempool_destroy(si->scsi_pkt_pool);
2260 	kfree(si);
2261 	lport->scsi_priv = NULL;
2262 }
2263 EXPORT_SYMBOL(fc_fcp_destroy);
2264 
2265 int fc_setup_fcp(void)
2266 {
2267 	int rc = 0;
2268 
2269 	scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2270 					    sizeof(struct fc_fcp_pkt),
2271 					    0, SLAB_HWCACHE_ALIGN, NULL);
2272 	if (!scsi_pkt_cachep) {
2273 		printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2274 		       "module load failed!");
2275 		rc = -ENOMEM;
2276 	}
2277 
2278 	return rc;
2279 }
2280 
2281 void fc_destroy_fcp(void)
2282 {
2283 	kmem_cache_destroy(scsi_pkt_cachep);
2284 }
2285 
2286 /**
2287  * fc_fcp_init() - Initialize the FCP layer for a local port
2288  * @lport: The local port to initialize the exchange layer for
2289  */
2290 int fc_fcp_init(struct fc_lport *lport)
2291 {
2292 	int rc;
2293 	struct fc_fcp_internal *si;
2294 
2295 	if (!lport->tt.fcp_cmd_send)
2296 		lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2297 
2298 	if (!lport->tt.fcp_cleanup)
2299 		lport->tt.fcp_cleanup = fc_fcp_cleanup;
2300 
2301 	if (!lport->tt.fcp_abort_io)
2302 		lport->tt.fcp_abort_io = fc_fcp_abort_io;
2303 
2304 	si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2305 	if (!si)
2306 		return -ENOMEM;
2307 	lport->scsi_priv = si;
2308 	si->max_can_queue = lport->host->can_queue;
2309 	INIT_LIST_HEAD(&si->scsi_pkt_queue);
2310 	spin_lock_init(&si->scsi_queue_lock);
2311 
2312 	si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2313 	if (!si->scsi_pkt_pool) {
2314 		rc = -ENOMEM;
2315 		goto free_internal;
2316 	}
2317 	return 0;
2318 
2319 free_internal:
2320 	kfree(si);
2321 	return rc;
2322 }
2323 EXPORT_SYMBOL(fc_fcp_init);
2324