xref: /openbmc/linux/drivers/scsi/libfc/fc_fcp.c (revision e190bfe5)
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21 
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31 
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37 
38 #include <scsi/fc/fc_fc2.h>
39 
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42 
43 #include "fc_libfc.h"
44 
45 struct kmem_cache *scsi_pkt_cachep;
46 
47 /* SRB state definitions */
48 #define FC_SRB_FREE		0		/* cmd is free */
49 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
50 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
51 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
52 #define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
53 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
54 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
56 
57 #define FC_SRB_READ		(1 << 1)
58 #define FC_SRB_WRITE		(1 << 0)
59 
60 /*
61  * The SCp.ptr should be tested and set under the host lock. NULL indicates
62  * that the command has been retruned to the scsi layer.
63  */
64 #define CMD_SP(Cmnd)		    ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
65 #define CMD_ENTRY_STATUS(Cmnd)	    ((Cmnd)->SCp.have_data_in)
66 #define CMD_COMPL_STATUS(Cmnd)	    ((Cmnd)->SCp.this_residual)
67 #define CMD_SCSI_STATUS(Cmnd)	    ((Cmnd)->SCp.Status)
68 #define CMD_RESID_LEN(Cmnd)	    ((Cmnd)->SCp.buffers_residual)
69 
70 /**
71  * struct fc_fcp_internal - FCP layer internal data
72  * @scsi_pkt_pool: Memory pool to draw FCP packets from
73  * @scsi_queue_lock: Protects the scsi_pkt_queue
74  * @scsi_pkt_queue: Current FCP packets
75  * @last_can_queue_ramp_down_time: ramp down time
76  * @last_can_queue_ramp_up_time: ramp up time
77  * @max_can_queue: max can_queue size
78  */
79 struct fc_fcp_internal {
80 	mempool_t		*scsi_pkt_pool;
81 	spinlock_t		scsi_queue_lock;
82 	struct list_head	scsi_pkt_queue;
83 	unsigned long		last_can_queue_ramp_down_time;
84 	unsigned long		last_can_queue_ramp_up_time;
85 	int			max_can_queue;
86 };
87 
88 #define fc_get_scsi_internal(x)	((struct fc_fcp_internal *)(x)->scsi_priv)
89 
90 /*
91  * function prototypes
92  * FC scsi I/O related functions
93  */
94 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
95 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
96 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
97 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
98 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
99 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
100 static void fc_fcp_recovery(struct fc_fcp_pkt *);
101 static void fc_fcp_timeout(unsigned long);
102 static void fc_fcp_rec(struct fc_fcp_pkt *);
103 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
104 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
105 static void fc_io_compl(struct fc_fcp_pkt *);
106 
107 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
108 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
109 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
110 
111 /*
112  * command status codes
113  */
114 #define FC_COMPLETE		0
115 #define FC_CMD_ABORTED		1
116 #define FC_CMD_RESET		2
117 #define FC_CMD_PLOGO		3
118 #define FC_SNS_RCV		4
119 #define FC_TRANS_ERR		5
120 #define FC_DATA_OVRRUN		6
121 #define FC_DATA_UNDRUN		7
122 #define FC_ERROR		8
123 #define FC_HRD_ERROR		9
124 #define FC_CMD_RECOVERY		10
125 
126 /*
127  * Error recovery timeout values.
128  */
129 #define FC_SCSI_ER_TIMEOUT	(10 * HZ)
130 #define FC_SCSI_TM_TOV		(10 * HZ)
131 #define FC_SCSI_REC_TOV		(2 * HZ)
132 #define FC_HOST_RESET_TIMEOUT	(30 * HZ)
133 #define FC_CAN_QUEUE_PERIOD	(60 * HZ)
134 
135 #define FC_MAX_ERROR_CNT	5
136 #define FC_MAX_RECOV_RETRY	3
137 
138 #define FC_FCP_DFLT_QUEUE_DEPTH 32
139 
140 /**
141  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
142  * @lport: The local port that the FCP packet is for
143  * @gfp:   GFP flags for allocation
144  *
145  * Return value: fcp_pkt structure or null on allocation failure.
146  * Context:	 Can be called from process context, no lock is required.
147  */
148 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
149 {
150 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
151 	struct fc_fcp_pkt *fsp;
152 
153 	fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
154 	if (fsp) {
155 		memset(fsp, 0, sizeof(*fsp));
156 		fsp->lp = lport;
157 		atomic_set(&fsp->ref_cnt, 1);
158 		init_timer(&fsp->timer);
159 		INIT_LIST_HEAD(&fsp->list);
160 		spin_lock_init(&fsp->scsi_pkt_lock);
161 	}
162 	return fsp;
163 }
164 
165 /**
166  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
167  * @fsp: The FCP packet to be released
168  *
169  * Context: Can be called from process or interrupt context,
170  *	    no lock is required.
171  */
172 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
173 {
174 	if (atomic_dec_and_test(&fsp->ref_cnt)) {
175 		struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
176 
177 		mempool_free(fsp, si->scsi_pkt_pool);
178 	}
179 }
180 
181 /**
182  * fc_fcp_pkt_hold() - Hold a fcp_pkt
183  * @fsp: The FCP packet to be held
184  */
185 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
186 {
187 	atomic_inc(&fsp->ref_cnt);
188 }
189 
190 /**
191  * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
192  * @seq: The sequence that the FCP packet is on (required by destructor API)
193  * @fsp: The FCP packet to be released
194  *
195  * This routine is called by a destructor callback in the exch_seq_send()
196  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
197  * argument even though it is not used by this routine.
198  *
199  * Context: No locking required.
200  */
201 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
202 {
203 	fc_fcp_pkt_release(fsp);
204 }
205 
206 /**
207  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
208  * @fsp: The FCP packet to be locked and incremented
209  *
210  * We should only return error if we return a command to SCSI-ml before
211  * getting a response. This can happen in cases where we send a abort, but
212  * do not wait for the response and the abort and command can be passing
213  * each other on the wire/network-layer.
214  *
215  * Note: this function locks the packet and gets a reference to allow
216  * callers to call the completion function while the lock is held and
217  * not have to worry about the packets refcount.
218  *
219  * TODO: Maybe we should just have callers grab/release the lock and
220  * have a function that they call to verify the fsp and grab a ref if
221  * needed.
222  */
223 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
224 {
225 	spin_lock_bh(&fsp->scsi_pkt_lock);
226 	if (fsp->state & FC_SRB_COMPL) {
227 		spin_unlock_bh(&fsp->scsi_pkt_lock);
228 		return -EPERM;
229 	}
230 
231 	fc_fcp_pkt_hold(fsp);
232 	return 0;
233 }
234 
235 /**
236  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
237  *			 reference count
238  * @fsp: The FCP packet to be unlocked and decremented
239  */
240 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
241 {
242 	spin_unlock_bh(&fsp->scsi_pkt_lock);
243 	fc_fcp_pkt_release(fsp);
244 }
245 
246 /**
247  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
248  * @fsp:   The FCP packet to start a timer for
249  * @delay: The timeout period for the timer
250  */
251 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
252 {
253 	if (!(fsp->state & FC_SRB_COMPL))
254 		mod_timer(&fsp->timer, jiffies + delay);
255 }
256 
257 /**
258  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
259  *			 fcp_pkt
260  * @fsp: The FCP packet to abort exchanges on
261  */
262 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
263 {
264 	if (!fsp->seq_ptr)
265 		return -EINVAL;
266 
267 	fsp->state |= FC_SRB_ABORT_PENDING;
268 	return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
269 }
270 
271 /**
272  * fc_fcp_retry_cmd() - Retry a fcp_pkt
273  * @fsp: The FCP packet to be retried
274  *
275  * Sets the status code to be FC_ERROR and then calls
276  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
277  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
278  * The SCSI-ml will retry the command.
279  */
280 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
281 {
282 	if (fsp->seq_ptr) {
283 		fsp->lp->tt.exch_done(fsp->seq_ptr);
284 		fsp->seq_ptr = NULL;
285 	}
286 
287 	fsp->state &= ~FC_SRB_ABORT_PENDING;
288 	fsp->io_status = 0;
289 	fsp->status_code = FC_ERROR;
290 	fc_fcp_complete_locked(fsp);
291 }
292 
293 /**
294  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
295  * @fsp: The FCP packet that will manage the DDP frames
296  * @xid: The XID that will be used for the DDP exchange
297  */
298 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
299 {
300 	struct fc_lport *lport;
301 
302 	lport = fsp->lp;
303 	if ((fsp->req_flags & FC_SRB_READ) &&
304 	    (lport->lro_enabled) && (lport->tt.ddp_setup)) {
305 		if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
306 					scsi_sg_count(fsp->cmd)))
307 			fsp->xfer_ddp = xid;
308 	}
309 }
310 
311 /**
312  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
313  *		       DDP related resources for a fcp_pkt
314  * @fsp: The FCP packet that DDP had been used on
315  */
316 static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
317 {
318 	struct fc_lport *lport;
319 
320 	if (!fsp)
321 		return;
322 
323 	if (fsp->xfer_ddp == FC_XID_UNKNOWN)
324 		return;
325 
326 	lport = fsp->lp;
327 	if (lport->tt.ddp_done) {
328 		fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
329 		fsp->xfer_ddp = FC_XID_UNKNOWN;
330 	}
331 }
332 
333 /**
334  * fc_fcp_can_queue_ramp_up() - increases can_queue
335  * @lport: lport to ramp up can_queue
336  *
337  * Locking notes: Called with Scsi_Host lock held
338  */
339 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
340 {
341 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
342 	int can_queue;
343 
344 	if (si->last_can_queue_ramp_up_time &&
345 	    (time_before(jiffies, si->last_can_queue_ramp_up_time +
346 			 FC_CAN_QUEUE_PERIOD)))
347 		return;
348 
349 	if (time_before(jiffies, si->last_can_queue_ramp_down_time +
350 			FC_CAN_QUEUE_PERIOD))
351 		return;
352 
353 	si->last_can_queue_ramp_up_time = jiffies;
354 
355 	can_queue = lport->host->can_queue << 1;
356 	if (can_queue >= si->max_can_queue) {
357 		can_queue = si->max_can_queue;
358 		si->last_can_queue_ramp_down_time = 0;
359 	}
360 	lport->host->can_queue = can_queue;
361 	shost_printk(KERN_ERR, lport->host, "libfc: increased "
362 		     "can_queue to %d.\n", can_queue);
363 }
364 
365 /**
366  * fc_fcp_can_queue_ramp_down() - reduces can_queue
367  * @lport: lport to reduce can_queue
368  *
369  * If we are getting memory allocation failures, then we may
370  * be trying to execute too many commands. We let the running
371  * commands complete or timeout, then try again with a reduced
372  * can_queue. Eventually we will hit the point where we run
373  * on all reserved structs.
374  *
375  * Locking notes: Called with Scsi_Host lock held
376  */
377 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
378 {
379 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
380 	int can_queue;
381 
382 	if (si->last_can_queue_ramp_down_time &&
383 	    (time_before(jiffies, si->last_can_queue_ramp_down_time +
384 			 FC_CAN_QUEUE_PERIOD)))
385 		return;
386 
387 	si->last_can_queue_ramp_down_time = jiffies;
388 
389 	can_queue = lport->host->can_queue;
390 	can_queue >>= 1;
391 	if (!can_queue)
392 		can_queue = 1;
393 	lport->host->can_queue = can_queue;
394 	shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
395 		     "Reducing can_queue to %d.\n", can_queue);
396 }
397 
398 /*
399  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
400  * @lport:	fc lport struct
401  * @len:	payload length
402  *
403  * Allocates fc_frame structure and buffer but if fails to allocate
404  * then reduce can_queue.
405  */
406 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
407 						  size_t len)
408 {
409 	struct fc_frame *fp;
410 	unsigned long flags;
411 
412 	fp = fc_frame_alloc(lport, len);
413 	if (likely(fp))
414 		return fp;
415 
416 	/* error case */
417 	spin_lock_irqsave(lport->host->host_lock, flags);
418 	fc_fcp_can_queue_ramp_down(lport);
419 	spin_unlock_irqrestore(lport->host->host_lock, flags);
420 	return NULL;
421 }
422 
423 /**
424  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
425  * @fsp: The FCP packet the data is on
426  * @fp:	 The data frame
427  */
428 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
429 {
430 	struct scsi_cmnd *sc = fsp->cmd;
431 	struct fc_lport *lport = fsp->lp;
432 	struct fcoe_dev_stats *stats;
433 	struct fc_frame_header *fh;
434 	size_t start_offset;
435 	size_t offset;
436 	u32 crc;
437 	u32 copy_len = 0;
438 	size_t len;
439 	void *buf;
440 	struct scatterlist *sg;
441 	u32 nents;
442 
443 	fh = fc_frame_header_get(fp);
444 	offset = ntohl(fh->fh_parm_offset);
445 	start_offset = offset;
446 	len = fr_len(fp) - sizeof(*fh);
447 	buf = fc_frame_payload_get(fp, 0);
448 
449 	/*
450 	 * if this I/O is ddped then clear it
451 	 * and initiate recovery since data
452 	 * frames are expected to be placed
453 	 * directly in that case.
454 	 */
455 	if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
456 		fc_fcp_ddp_done(fsp);
457 		goto err;
458 	}
459 	if (offset + len > fsp->data_len) {
460 		/* this should never happen */
461 		if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
462 		    fc_frame_crc_check(fp))
463 			goto crc_err;
464 		FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
465 			   "data_len %x\n", len, offset, fsp->data_len);
466 		goto err;
467 	}
468 	if (offset != fsp->xfer_len)
469 		fsp->state |= FC_SRB_DISCONTIG;
470 
471 	sg = scsi_sglist(sc);
472 	nents = scsi_sg_count(sc);
473 
474 	if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
475 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
476 						    &offset, KM_SOFTIRQ0, NULL);
477 	} else {
478 		crc = crc32(~0, (u8 *) fh, sizeof(*fh));
479 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
480 						    &offset, KM_SOFTIRQ0, &crc);
481 		buf = fc_frame_payload_get(fp, 0);
482 		if (len % 4)
483 			crc = crc32(crc, buf + len, 4 - (len % 4));
484 
485 		if (~crc != le32_to_cpu(fr_crc(fp))) {
486 crc_err:
487 			stats = per_cpu_ptr(lport->dev_stats, get_cpu());
488 			stats->ErrorFrames++;
489 			/* per cpu count, not total count, but OK for limit */
490 			if (stats->InvalidCRCCount++ < 5)
491 				printk(KERN_WARNING "libfc: CRC error on data "
492 				       "frame for port (%6.6x)\n",
493 				       lport->port_id);
494 			put_cpu();
495 			/*
496 			 * Assume the frame is total garbage.
497 			 * We may have copied it over the good part
498 			 * of the buffer.
499 			 * If so, we need to retry the entire operation.
500 			 * Otherwise, ignore it.
501 			 */
502 			if (fsp->state & FC_SRB_DISCONTIG)
503 				goto err;
504 			return;
505 		}
506 	}
507 
508 	if (fsp->xfer_contig_end == start_offset)
509 		fsp->xfer_contig_end += copy_len;
510 	fsp->xfer_len += copy_len;
511 
512 	/*
513 	 * In the very rare event that this data arrived after the response
514 	 * and completes the transfer, call the completion handler.
515 	 */
516 	if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
517 	    fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
518 		fc_fcp_complete_locked(fsp);
519 	return;
520 err:
521 	fc_fcp_recovery(fsp);
522 }
523 
524 /**
525  * fc_fcp_send_data() - Send SCSI data to a target
526  * @fsp:      The FCP packet the data is on
527  * @sp:	      The sequence the data is to be sent on
528  * @offset:   The starting offset for this data request
529  * @seq_blen: The burst length for this data request
530  *
531  * Called after receiving a Transfer Ready data descriptor.
532  * If the LLD is capable of sequence offload then send down the
533  * seq_blen amount of data in single frame, otherwise send
534  * multiple frames of the maximum frame payload supported by
535  * the target port.
536  */
537 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
538 			    size_t offset, size_t seq_blen)
539 {
540 	struct fc_exch *ep;
541 	struct scsi_cmnd *sc;
542 	struct scatterlist *sg;
543 	struct fc_frame *fp = NULL;
544 	struct fc_lport *lport = fsp->lp;
545 	struct page *page;
546 	size_t remaining;
547 	size_t t_blen;
548 	size_t tlen;
549 	size_t sg_bytes;
550 	size_t frame_offset, fh_parm_offset;
551 	size_t off;
552 	int error;
553 	void *data = NULL;
554 	void *page_addr;
555 	int using_sg = lport->sg_supp;
556 	u32 f_ctl;
557 
558 	WARN_ON(seq_blen <= 0);
559 	if (unlikely(offset + seq_blen > fsp->data_len)) {
560 		/* this should never happen */
561 		FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
562 			   "offset %zx\n", seq_blen, offset);
563 		fc_fcp_send_abort(fsp);
564 		return 0;
565 	} else if (offset != fsp->xfer_len) {
566 		/* Out of Order Data Request - no problem, but unexpected. */
567 		FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
568 			   "seq_blen %zx offset %zx\n", seq_blen, offset);
569 	}
570 
571 	/*
572 	 * if LLD is capable of seq_offload then set transport
573 	 * burst length (t_blen) to seq_blen, otherwise set t_blen
574 	 * to max FC frame payload previously set in fsp->max_payload.
575 	 */
576 	t_blen = fsp->max_payload;
577 	if (lport->seq_offload) {
578 		t_blen = min(seq_blen, (size_t)lport->lso_max);
579 		FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
580 			   fsp, seq_blen, lport->lso_max, t_blen);
581 	}
582 
583 	WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD);
584 	if (t_blen > 512)
585 		t_blen &= ~(512 - 1);	/* round down to block size */
586 	WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD);	/* won't go below 256 */
587 	sc = fsp->cmd;
588 
589 	remaining = seq_blen;
590 	fh_parm_offset = frame_offset = offset;
591 	tlen = 0;
592 	seq = lport->tt.seq_start_next(seq);
593 	f_ctl = FC_FC_REL_OFF;
594 	WARN_ON(!seq);
595 
596 	sg = scsi_sglist(sc);
597 
598 	while (remaining > 0 && sg) {
599 		if (offset >= sg->length) {
600 			offset -= sg->length;
601 			sg = sg_next(sg);
602 			continue;
603 		}
604 		if (!fp) {
605 			tlen = min(t_blen, remaining);
606 
607 			/*
608 			 * TODO.  Temporary workaround.	 fc_seq_send() can't
609 			 * handle odd lengths in non-linear skbs.
610 			 * This will be the final fragment only.
611 			 */
612 			if (tlen % 4)
613 				using_sg = 0;
614 			fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
615 			if (!fp)
616 				return -ENOMEM;
617 
618 			data = fc_frame_header_get(fp) + 1;
619 			fh_parm_offset = frame_offset;
620 			fr_max_payload(fp) = fsp->max_payload;
621 		}
622 
623 		off = offset + sg->offset;
624 		sg_bytes = min(tlen, sg->length - offset);
625 		sg_bytes = min(sg_bytes,
626 			       (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
627 		page = sg_page(sg) + (off >> PAGE_SHIFT);
628 		if (using_sg) {
629 			get_page(page);
630 			skb_fill_page_desc(fp_skb(fp),
631 					   skb_shinfo(fp_skb(fp))->nr_frags,
632 					   page, off & ~PAGE_MASK, sg_bytes);
633 			fp_skb(fp)->data_len += sg_bytes;
634 			fr_len(fp) += sg_bytes;
635 			fp_skb(fp)->truesize += PAGE_SIZE;
636 		} else {
637 			/*
638 			 * The scatterlist item may be bigger than PAGE_SIZE,
639 			 * but we must not cross pages inside the kmap.
640 			 */
641 			page_addr = kmap_atomic(page, KM_SOFTIRQ0);
642 			memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
643 			       sg_bytes);
644 			kunmap_atomic(page_addr, KM_SOFTIRQ0);
645 			data += sg_bytes;
646 		}
647 		offset += sg_bytes;
648 		frame_offset += sg_bytes;
649 		tlen -= sg_bytes;
650 		remaining -= sg_bytes;
651 
652 		if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
653 		    (tlen))
654 			continue;
655 
656 		/*
657 		 * Send sequence with transfer sequence initiative in case
658 		 * this is last FCP frame of the sequence.
659 		 */
660 		if (remaining == 0)
661 			f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
662 
663 		ep = fc_seq_exch(seq);
664 		fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
665 			       FC_TYPE_FCP, f_ctl, fh_parm_offset);
666 
667 		/*
668 		 * send fragment using for a sequence.
669 		 */
670 		error = lport->tt.seq_send(lport, seq, fp);
671 		if (error) {
672 			WARN_ON(1);		/* send error should be rare */
673 			fc_fcp_retry_cmd(fsp);
674 			return 0;
675 		}
676 		fp = NULL;
677 	}
678 	fsp->xfer_len += seq_blen;	/* premature count? */
679 	return 0;
680 }
681 
682 /**
683  * fc_fcp_abts_resp() - Send an ABTS response
684  * @fsp: The FCP packet that is being aborted
685  * @fp:	 The response frame
686  */
687 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
688 {
689 	int ba_done = 1;
690 	struct fc_ba_rjt *brp;
691 	struct fc_frame_header *fh;
692 
693 	fh = fc_frame_header_get(fp);
694 	switch (fh->fh_r_ctl) {
695 	case FC_RCTL_BA_ACC:
696 		break;
697 	case FC_RCTL_BA_RJT:
698 		brp = fc_frame_payload_get(fp, sizeof(*brp));
699 		if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
700 			break;
701 		/* fall thru */
702 	default:
703 		/*
704 		 * we will let the command timeout
705 		 * and scsi-ml recover in this case,
706 		 * therefore cleared the ba_done flag.
707 		 */
708 		ba_done = 0;
709 	}
710 
711 	if (ba_done) {
712 		fsp->state |= FC_SRB_ABORTED;
713 		fsp->state &= ~FC_SRB_ABORT_PENDING;
714 
715 		if (fsp->wait_for_comp)
716 			complete(&fsp->tm_done);
717 		else
718 			fc_fcp_complete_locked(fsp);
719 	}
720 }
721 
722 /**
723  * fc_fcp_recv() - Reveive an FCP frame
724  * @seq: The sequence the frame is on
725  * @fp:	 The received frame
726  * @arg: The related FCP packet
727  *
728  * Context: Called from Soft IRQ context. Can not be called
729  *	    holding the FCP packet list lock.
730  */
731 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
732 {
733 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
734 	struct fc_lport *lport = fsp->lp;
735 	struct fc_frame_header *fh;
736 	struct fcp_txrdy *dd;
737 	u8 r_ctl;
738 	int rc = 0;
739 
740 	if (IS_ERR(fp)) {
741 		fc_fcp_error(fsp, fp);
742 		return;
743 	}
744 
745 	fh = fc_frame_header_get(fp);
746 	r_ctl = fh->fh_r_ctl;
747 
748 	if (!(lport->state & LPORT_ST_READY))
749 		goto out;
750 	if (fc_fcp_lock_pkt(fsp))
751 		goto out;
752 	fsp->last_pkt_time = jiffies;
753 
754 	if (fh->fh_type == FC_TYPE_BLS) {
755 		fc_fcp_abts_resp(fsp, fp);
756 		goto unlock;
757 	}
758 
759 	if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
760 		goto unlock;
761 
762 	if (r_ctl == FC_RCTL_DD_DATA_DESC) {
763 		/*
764 		 * received XFER RDY from the target
765 		 * need to send data to the target
766 		 */
767 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
768 		dd = fc_frame_payload_get(fp, sizeof(*dd));
769 		WARN_ON(!dd);
770 
771 		rc = fc_fcp_send_data(fsp, seq,
772 				      (size_t) ntohl(dd->ft_data_ro),
773 				      (size_t) ntohl(dd->ft_burst_len));
774 		if (!rc)
775 			seq->rec_data = fsp->xfer_len;
776 	} else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
777 		/*
778 		 * received a DATA frame
779 		 * next we will copy the data to the system buffer
780 		 */
781 		WARN_ON(fr_len(fp) < sizeof(*fh));	/* len may be 0 */
782 		fc_fcp_recv_data(fsp, fp);
783 		seq->rec_data = fsp->xfer_contig_end;
784 	} else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
785 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
786 
787 		fc_fcp_resp(fsp, fp);
788 	} else {
789 		FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
790 	}
791 unlock:
792 	fc_fcp_unlock_pkt(fsp);
793 out:
794 	fc_frame_free(fp);
795 }
796 
797 /**
798  * fc_fcp_resp() - Handler for FCP responses
799  * @fsp: The FCP packet the response is for
800  * @fp:	 The response frame
801  */
802 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
803 {
804 	struct fc_frame_header *fh;
805 	struct fcp_resp *fc_rp;
806 	struct fcp_resp_ext *rp_ex;
807 	struct fcp_resp_rsp_info *fc_rp_info;
808 	u32 plen;
809 	u32 expected_len;
810 	u32 respl = 0;
811 	u32 snsl = 0;
812 	u8 flags = 0;
813 
814 	plen = fr_len(fp);
815 	fh = (struct fc_frame_header *)fr_hdr(fp);
816 	if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
817 		goto len_err;
818 	plen -= sizeof(*fh);
819 	fc_rp = (struct fcp_resp *)(fh + 1);
820 	fsp->cdb_status = fc_rp->fr_status;
821 	flags = fc_rp->fr_flags;
822 	fsp->scsi_comp_flags = flags;
823 	expected_len = fsp->data_len;
824 
825 	/* if ddp, update xfer len */
826 	fc_fcp_ddp_done(fsp);
827 
828 	if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
829 		rp_ex = (void *)(fc_rp + 1);
830 		if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
831 			if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
832 				goto len_err;
833 			fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
834 			if (flags & FCP_RSP_LEN_VAL) {
835 				respl = ntohl(rp_ex->fr_rsp_len);
836 				if (respl != sizeof(*fc_rp_info))
837 					goto len_err;
838 				if (fsp->wait_for_comp) {
839 					/* Abuse cdb_status for rsp code */
840 					fsp->cdb_status = fc_rp_info->rsp_code;
841 					complete(&fsp->tm_done);
842 					/*
843 					 * tmfs will not have any scsi cmd so
844 					 * exit here
845 					 */
846 					return;
847 				}
848 			}
849 			if (flags & FCP_SNS_LEN_VAL) {
850 				snsl = ntohl(rp_ex->fr_sns_len);
851 				if (snsl > SCSI_SENSE_BUFFERSIZE)
852 					snsl = SCSI_SENSE_BUFFERSIZE;
853 				memcpy(fsp->cmd->sense_buffer,
854 				       (char *)fc_rp_info + respl, snsl);
855 			}
856 		}
857 		if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
858 			if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
859 				goto len_err;
860 			if (flags & FCP_RESID_UNDER) {
861 				fsp->scsi_resid = ntohl(rp_ex->fr_resid);
862 				/*
863 				 * The cmnd->underflow is the minimum number of
864 				 * bytes that must be transfered for this
865 				 * command.  Provided a sense condition is not
866 				 * present, make sure the actual amount
867 				 * transferred is at least the underflow value
868 				 * or fail.
869 				 */
870 				if (!(flags & FCP_SNS_LEN_VAL) &&
871 				    (fc_rp->fr_status == 0) &&
872 				    (scsi_bufflen(fsp->cmd) -
873 				     fsp->scsi_resid) < fsp->cmd->underflow)
874 					goto err;
875 				expected_len -= fsp->scsi_resid;
876 			} else {
877 				fsp->status_code = FC_ERROR;
878 			}
879 		}
880 	}
881 	fsp->state |= FC_SRB_RCV_STATUS;
882 
883 	/*
884 	 * Check for missing or extra data frames.
885 	 */
886 	if (unlikely(fsp->xfer_len != expected_len)) {
887 		if (fsp->xfer_len < expected_len) {
888 			/*
889 			 * Some data may be queued locally,
890 			 * Wait a at least one jiffy to see if it is delivered.
891 			 * If this expires without data, we may do SRR.
892 			 */
893 			fc_fcp_timer_set(fsp, 2);
894 			return;
895 		}
896 		fsp->status_code = FC_DATA_OVRRUN;
897 		FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
898 			   "len %x, data len %x\n",
899 			   fsp->rport->port_id,
900 			   fsp->xfer_len, expected_len, fsp->data_len);
901 	}
902 	fc_fcp_complete_locked(fsp);
903 	return;
904 
905 len_err:
906 	FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
907 		   "snsl %u\n", flags, fr_len(fp), respl, snsl);
908 err:
909 	fsp->status_code = FC_ERROR;
910 	fc_fcp_complete_locked(fsp);
911 }
912 
913 /**
914  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
915  *			      fcp_pkt lock held
916  * @fsp: The FCP packet to be completed
917  *
918  * This function may sleep if a timer is pending. The packet lock must be
919  * held, and the host lock must not be held.
920  */
921 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
922 {
923 	struct fc_lport *lport = fsp->lp;
924 	struct fc_seq *seq;
925 	struct fc_exch *ep;
926 	u32 f_ctl;
927 
928 	if (fsp->state & FC_SRB_ABORT_PENDING)
929 		return;
930 
931 	if (fsp->state & FC_SRB_ABORTED) {
932 		if (!fsp->status_code)
933 			fsp->status_code = FC_CMD_ABORTED;
934 	} else {
935 		/*
936 		 * Test for transport underrun, independent of response
937 		 * underrun status.
938 		 */
939 		if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
940 		    (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
941 		     fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
942 			fsp->status_code = FC_DATA_UNDRUN;
943 			fsp->io_status = 0;
944 		}
945 	}
946 
947 	seq = fsp->seq_ptr;
948 	if (seq) {
949 		fsp->seq_ptr = NULL;
950 		if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
951 			struct fc_frame *conf_frame;
952 			struct fc_seq *csp;
953 
954 			csp = lport->tt.seq_start_next(seq);
955 			conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
956 			if (conf_frame) {
957 				f_ctl = FC_FC_SEQ_INIT;
958 				f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
959 				ep = fc_seq_exch(seq);
960 				fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
961 					       ep->did, ep->sid,
962 					       FC_TYPE_FCP, f_ctl, 0);
963 				lport->tt.seq_send(lport, csp, conf_frame);
964 			}
965 		}
966 		lport->tt.exch_done(seq);
967 	}
968 	fc_io_compl(fsp);
969 }
970 
971 /**
972  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
973  * @fsp:   The FCP packet whose exchanges should be canceled
974  * @error: The reason for the cancellation
975  */
976 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
977 {
978 	struct fc_lport *lport = fsp->lp;
979 
980 	if (fsp->seq_ptr) {
981 		lport->tt.exch_done(fsp->seq_ptr);
982 		fsp->seq_ptr = NULL;
983 	}
984 	fsp->status_code = error;
985 }
986 
987 /**
988  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
989  * @lport: The local port whose exchanges should be canceled
990  * @id:	   The target's ID
991  * @lun:   The LUN
992  * @error: The reason for cancellation
993  *
994  * If lun or id is -1, they are ignored.
995  */
996 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
997 				    unsigned int lun, int error)
998 {
999 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1000 	struct fc_fcp_pkt *fsp;
1001 	struct scsi_cmnd *sc_cmd;
1002 	unsigned long flags;
1003 
1004 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1005 restart:
1006 	list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1007 		sc_cmd = fsp->cmd;
1008 		if (id != -1 && scmd_id(sc_cmd) != id)
1009 			continue;
1010 
1011 		if (lun != -1 && sc_cmd->device->lun != lun)
1012 			continue;
1013 
1014 		fc_fcp_pkt_hold(fsp);
1015 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1016 
1017 		if (!fc_fcp_lock_pkt(fsp)) {
1018 			fc_fcp_cleanup_cmd(fsp, error);
1019 			fc_io_compl(fsp);
1020 			fc_fcp_unlock_pkt(fsp);
1021 		}
1022 
1023 		fc_fcp_pkt_release(fsp);
1024 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1025 		/*
1026 		 * while we dropped the lock multiple pkts could
1027 		 * have been released, so we have to start over.
1028 		 */
1029 		goto restart;
1030 	}
1031 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1032 }
1033 
1034 /**
1035  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1036  * @lport: The local port whose exchanges are to be aborted
1037  */
1038 static void fc_fcp_abort_io(struct fc_lport *lport)
1039 {
1040 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1041 }
1042 
1043 /**
1044  * fc_fcp_pkt_send() - Send a fcp_pkt
1045  * @lport: The local port to send the FCP packet on
1046  * @fsp:   The FCP packet to send
1047  *
1048  * Return:  Zero for success and -1 for failure
1049  * Locks:   Called without locks held
1050  */
1051 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1052 {
1053 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1054 	unsigned long flags;
1055 	int rc;
1056 
1057 	fsp->cmd->SCp.ptr = (char *)fsp;
1058 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1059 	fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1060 
1061 	int_to_scsilun(fsp->cmd->device->lun,
1062 		       (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1063 	memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1064 
1065 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1066 	list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1067 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1068 	rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1069 	if (unlikely(rc)) {
1070 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1071 		list_del(&fsp->list);
1072 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1073 	}
1074 
1075 	return rc;
1076 }
1077 
1078 /**
1079  * fc_fcp_cmd_send() - Send a FCP command
1080  * @lport: The local port to send the command on
1081  * @fsp:   The FCP packet the command is on
1082  * @resp:  The handler for the response
1083  */
1084 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1085 			   void (*resp)(struct fc_seq *,
1086 					struct fc_frame *fp,
1087 					void *arg))
1088 {
1089 	struct fc_frame *fp;
1090 	struct fc_seq *seq;
1091 	struct fc_rport *rport;
1092 	struct fc_rport_libfc_priv *rpriv;
1093 	const size_t len = sizeof(fsp->cdb_cmd);
1094 	int rc = 0;
1095 
1096 	if (fc_fcp_lock_pkt(fsp))
1097 		return 0;
1098 
1099 	fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1100 	if (!fp) {
1101 		rc = -1;
1102 		goto unlock;
1103 	}
1104 
1105 	memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1106 	fr_fsp(fp) = fsp;
1107 	rport = fsp->rport;
1108 	fsp->max_payload = rport->maxframe_size;
1109 	rpriv = rport->dd_data;
1110 
1111 	fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1112 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1113 		       FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1114 
1115 	seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1116 				      fsp, 0);
1117 	if (!seq) {
1118 		rc = -1;
1119 		goto unlock;
1120 	}
1121 	fsp->last_pkt_time = jiffies;
1122 	fsp->seq_ptr = seq;
1123 	fc_fcp_pkt_hold(fsp);	/* hold for fc_fcp_pkt_destroy */
1124 
1125 	setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1126 	fc_fcp_timer_set(fsp,
1127 			 (fsp->tgt_flags & FC_RP_FLAGS_REC_SUPPORTED) ?
1128 			 FC_SCSI_REC_TOV : FC_SCSI_ER_TIMEOUT);
1129 unlock:
1130 	fc_fcp_unlock_pkt(fsp);
1131 	return rc;
1132 }
1133 
1134 /**
1135  * fc_fcp_error() - Handler for FCP layer errors
1136  * @fsp: The FCP packet the error is on
1137  * @fp:	 The frame that has errored
1138  */
1139 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1140 {
1141 	int error = PTR_ERR(fp);
1142 
1143 	if (fc_fcp_lock_pkt(fsp))
1144 		return;
1145 
1146 	if (error == -FC_EX_CLOSED) {
1147 		fc_fcp_retry_cmd(fsp);
1148 		goto unlock;
1149 	}
1150 
1151 	/*
1152 	 * clear abort pending, because the lower layer
1153 	 * decided to force completion.
1154 	 */
1155 	fsp->state &= ~FC_SRB_ABORT_PENDING;
1156 	fsp->status_code = FC_CMD_PLOGO;
1157 	fc_fcp_complete_locked(fsp);
1158 unlock:
1159 	fc_fcp_unlock_pkt(fsp);
1160 }
1161 
1162 /**
1163  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1164  * @fsp:   The FCP packet to abort on
1165  *
1166  * Called to send an abort and then wait for abort completion
1167  */
1168 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1169 {
1170 	int rc = FAILED;
1171 
1172 	if (fc_fcp_send_abort(fsp))
1173 		return FAILED;
1174 
1175 	init_completion(&fsp->tm_done);
1176 	fsp->wait_for_comp = 1;
1177 
1178 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1179 	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1180 	spin_lock_bh(&fsp->scsi_pkt_lock);
1181 	fsp->wait_for_comp = 0;
1182 
1183 	if (!rc) {
1184 		FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1185 		rc = FAILED;
1186 	} else if (fsp->state & FC_SRB_ABORTED) {
1187 		FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1188 		rc = SUCCESS;
1189 		fc_fcp_complete_locked(fsp);
1190 	}
1191 
1192 	return rc;
1193 }
1194 
1195 /**
1196  * fc_lun_reset_send() - Send LUN reset command
1197  * @data: The FCP packet that identifies the LUN to be reset
1198  */
1199 static void fc_lun_reset_send(unsigned long data)
1200 {
1201 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1202 	struct fc_lport *lport = fsp->lp;
1203 	if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1204 		if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1205 			return;
1206 		if (fc_fcp_lock_pkt(fsp))
1207 			return;
1208 		setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1209 		fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1210 		fc_fcp_unlock_pkt(fsp);
1211 	}
1212 }
1213 
1214 /**
1215  * fc_lun_reset() - Send a LUN RESET command to a device
1216  *		    and wait for the reply
1217  * @lport: The local port to sent the comand on
1218  * @fsp:   The FCP packet that identifies the LUN to be reset
1219  * @id:	   The SCSI command ID
1220  * @lun:   The LUN ID to be reset
1221  */
1222 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1223 			unsigned int id, unsigned int lun)
1224 {
1225 	int rc;
1226 
1227 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1228 	fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1229 	int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1230 
1231 	fsp->wait_for_comp = 1;
1232 	init_completion(&fsp->tm_done);
1233 
1234 	fc_lun_reset_send((unsigned long)fsp);
1235 
1236 	/*
1237 	 * wait for completion of reset
1238 	 * after that make sure all commands are terminated
1239 	 */
1240 	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1241 
1242 	spin_lock_bh(&fsp->scsi_pkt_lock);
1243 	fsp->state |= FC_SRB_COMPL;
1244 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1245 
1246 	del_timer_sync(&fsp->timer);
1247 
1248 	spin_lock_bh(&fsp->scsi_pkt_lock);
1249 	if (fsp->seq_ptr) {
1250 		lport->tt.exch_done(fsp->seq_ptr);
1251 		fsp->seq_ptr = NULL;
1252 	}
1253 	fsp->wait_for_comp = 0;
1254 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1255 
1256 	if (!rc) {
1257 		FC_SCSI_DBG(lport, "lun reset failed\n");
1258 		return FAILED;
1259 	}
1260 
1261 	/* cdb_status holds the tmf's rsp code */
1262 	if (fsp->cdb_status != FCP_TMF_CMPL)
1263 		return FAILED;
1264 
1265 	FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1266 	fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1267 	return SUCCESS;
1268 }
1269 
1270 /**
1271  * fc_tm_done() - Task Managment response handler
1272  * @seq: The sequence that the response is on
1273  * @fp:	 The response frame
1274  * @arg: The FCP packet the response is for
1275  */
1276 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1277 {
1278 	struct fc_fcp_pkt *fsp = arg;
1279 	struct fc_frame_header *fh;
1280 
1281 	if (IS_ERR(fp)) {
1282 		/*
1283 		 * If there is an error just let it timeout or wait
1284 		 * for TMF to be aborted if it timedout.
1285 		 *
1286 		 * scsi-eh will escalate for when either happens.
1287 		 */
1288 		return;
1289 	}
1290 
1291 	if (fc_fcp_lock_pkt(fsp))
1292 		return;
1293 
1294 	/*
1295 	 * raced with eh timeout handler.
1296 	 */
1297 	if (!fsp->seq_ptr || !fsp->wait_for_comp) {
1298 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1299 		return;
1300 	}
1301 
1302 	fh = fc_frame_header_get(fp);
1303 	if (fh->fh_type != FC_TYPE_BLS)
1304 		fc_fcp_resp(fsp, fp);
1305 	fsp->seq_ptr = NULL;
1306 	fsp->lp->tt.exch_done(seq);
1307 	fc_frame_free(fp);
1308 	fc_fcp_unlock_pkt(fsp);
1309 }
1310 
1311 /**
1312  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1313  * @lport: The local port to be cleaned up
1314  */
1315 static void fc_fcp_cleanup(struct fc_lport *lport)
1316 {
1317 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1318 }
1319 
1320 /**
1321  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1322  * @data: The FCP packet that has timed out
1323  *
1324  * If REC is supported then just issue it and return. The REC exchange will
1325  * complete or time out and recovery can continue at that point. Otherwise,
1326  * if the response has been received without all the data it has been
1327  * ER_TIMEOUT since the response was received. If the response has not been
1328  * received we see if data was received recently. If it has been then we
1329  * continue waiting, otherwise, we abort the command.
1330  */
1331 static void fc_fcp_timeout(unsigned long data)
1332 {
1333 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1334 	struct fc_rport *rport = fsp->rport;
1335 	struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1336 
1337 	if (fc_fcp_lock_pkt(fsp))
1338 		return;
1339 
1340 	if (fsp->cdb_cmd.fc_tm_flags)
1341 		goto unlock;
1342 
1343 	fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1344 
1345 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1346 		fc_fcp_rec(fsp);
1347 	else if (time_after_eq(fsp->last_pkt_time + (FC_SCSI_ER_TIMEOUT / 2),
1348 			       jiffies))
1349 		fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
1350 	else if (fsp->state & FC_SRB_RCV_STATUS)
1351 		fc_fcp_complete_locked(fsp);
1352 	else
1353 		fc_fcp_recovery(fsp);
1354 	fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1355 unlock:
1356 	fc_fcp_unlock_pkt(fsp);
1357 }
1358 
1359 /**
1360  * fc_fcp_rec() - Send a REC ELS request
1361  * @fsp: The FCP packet to send the REC request on
1362  */
1363 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1364 {
1365 	struct fc_lport *lport;
1366 	struct fc_frame *fp;
1367 	struct fc_rport *rport;
1368 	struct fc_rport_libfc_priv *rpriv;
1369 
1370 	lport = fsp->lp;
1371 	rport = fsp->rport;
1372 	rpriv = rport->dd_data;
1373 	if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1374 		fsp->status_code = FC_HRD_ERROR;
1375 		fsp->io_status = 0;
1376 		fc_fcp_complete_locked(fsp);
1377 		return;
1378 	}
1379 	fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1380 	if (!fp)
1381 		goto retry;
1382 
1383 	fr_seq(fp) = fsp->seq_ptr;
1384 	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1385 		       rpriv->local_port->port_id, FC_TYPE_ELS,
1386 		       FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1387 	if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1388 				 fc_fcp_rec_resp, fsp,
1389 				 jiffies_to_msecs(FC_SCSI_REC_TOV))) {
1390 		fc_fcp_pkt_hold(fsp);		/* hold while REC outstanding */
1391 		return;
1392 	}
1393 retry:
1394 	if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1395 		fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1396 	else
1397 		fc_fcp_recovery(fsp);
1398 }
1399 
1400 /**
1401  * fc_fcp_rec_resp() - Handler for REC ELS responses
1402  * @seq: The sequence the response is on
1403  * @fp:	 The response frame
1404  * @arg: The FCP packet the response is on
1405  *
1406  * If the response is a reject then the scsi layer will handle
1407  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1408  * set the timeout and return. If the I/O was completed then complete the
1409  * exchange and tell the SCSI layer.
1410  */
1411 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1412 {
1413 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1414 	struct fc_els_rec_acc *recp;
1415 	struct fc_els_ls_rjt *rjt;
1416 	u32 e_stat;
1417 	u8 opcode;
1418 	u32 offset;
1419 	enum dma_data_direction data_dir;
1420 	enum fc_rctl r_ctl;
1421 	struct fc_rport_libfc_priv *rpriv;
1422 
1423 	if (IS_ERR(fp)) {
1424 		fc_fcp_rec_error(fsp, fp);
1425 		return;
1426 	}
1427 
1428 	if (fc_fcp_lock_pkt(fsp))
1429 		goto out;
1430 
1431 	fsp->recov_retry = 0;
1432 	opcode = fc_frame_payload_op(fp);
1433 	if (opcode == ELS_LS_RJT) {
1434 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1435 		switch (rjt->er_reason) {
1436 		default:
1437 			FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1438 				   "reason %d expl %d\n",
1439 				   fsp->rport->port_id, rjt->er_reason,
1440 				   rjt->er_explan);
1441 			/* fall through */
1442 		case ELS_RJT_UNSUP:
1443 			FC_FCP_DBG(fsp, "device does not support REC\n");
1444 			rpriv = fsp->rport->dd_data;
1445 			/*
1446 			 * if we do not spport RECs or got some bogus
1447 			 * reason then resetup timer so we check for
1448 			 * making progress.
1449 			 */
1450 			rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1451 			fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
1452 			break;
1453 		case ELS_RJT_LOGIC:
1454 		case ELS_RJT_UNAB:
1455 			/*
1456 			 * If no data transfer, the command frame got dropped
1457 			 * so we just retry.  If data was transferred, we
1458 			 * lost the response but the target has no record,
1459 			 * so we abort and retry.
1460 			 */
1461 			if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1462 			    fsp->xfer_len == 0) {
1463 				fc_fcp_retry_cmd(fsp);
1464 				break;
1465 			}
1466 			fc_fcp_recovery(fsp);
1467 			break;
1468 		}
1469 	} else if (opcode == ELS_LS_ACC) {
1470 		if (fsp->state & FC_SRB_ABORTED)
1471 			goto unlock_out;
1472 
1473 		data_dir = fsp->cmd->sc_data_direction;
1474 		recp = fc_frame_payload_get(fp, sizeof(*recp));
1475 		offset = ntohl(recp->reca_fc4value);
1476 		e_stat = ntohl(recp->reca_e_stat);
1477 
1478 		if (e_stat & ESB_ST_COMPLETE) {
1479 
1480 			/*
1481 			 * The exchange is complete.
1482 			 *
1483 			 * For output, we must've lost the response.
1484 			 * For input, all data must've been sent.
1485 			 * We lost may have lost the response
1486 			 * (and a confirmation was requested) and maybe
1487 			 * some data.
1488 			 *
1489 			 * If all data received, send SRR
1490 			 * asking for response.	 If partial data received,
1491 			 * or gaps, SRR requests data at start of gap.
1492 			 * Recovery via SRR relies on in-order-delivery.
1493 			 */
1494 			if (data_dir == DMA_TO_DEVICE) {
1495 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1496 			} else if (fsp->xfer_contig_end == offset) {
1497 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1498 			} else {
1499 				offset = fsp->xfer_contig_end;
1500 				r_ctl = FC_RCTL_DD_SOL_DATA;
1501 			}
1502 			fc_fcp_srr(fsp, r_ctl, offset);
1503 		} else if (e_stat & ESB_ST_SEQ_INIT) {
1504 
1505 			/*
1506 			 * The remote port has the initiative, so just
1507 			 * keep waiting for it to complete.
1508 			 */
1509 			fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1510 		} else {
1511 
1512 			/*
1513 			 * The exchange is incomplete, we have seq. initiative.
1514 			 * Lost response with requested confirmation,
1515 			 * lost confirmation, lost transfer ready or
1516 			 * lost write data.
1517 			 *
1518 			 * For output, if not all data was received, ask
1519 			 * for transfer ready to be repeated.
1520 			 *
1521 			 * If we received or sent all the data, send SRR to
1522 			 * request response.
1523 			 *
1524 			 * If we lost a response, we may have lost some read
1525 			 * data as well.
1526 			 */
1527 			r_ctl = FC_RCTL_DD_SOL_DATA;
1528 			if (data_dir == DMA_TO_DEVICE) {
1529 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1530 				if (offset < fsp->data_len)
1531 					r_ctl = FC_RCTL_DD_DATA_DESC;
1532 			} else if (offset == fsp->xfer_contig_end) {
1533 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1534 			} else if (fsp->xfer_contig_end < offset) {
1535 				offset = fsp->xfer_contig_end;
1536 			}
1537 			fc_fcp_srr(fsp, r_ctl, offset);
1538 		}
1539 	}
1540 unlock_out:
1541 	fc_fcp_unlock_pkt(fsp);
1542 out:
1543 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1544 	fc_frame_free(fp);
1545 }
1546 
1547 /**
1548  * fc_fcp_rec_error() - Handler for REC errors
1549  * @fsp: The FCP packet the error is on
1550  * @fp:	 The REC frame
1551  */
1552 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1553 {
1554 	int error = PTR_ERR(fp);
1555 
1556 	if (fc_fcp_lock_pkt(fsp))
1557 		goto out;
1558 
1559 	switch (error) {
1560 	case -FC_EX_CLOSED:
1561 		fc_fcp_retry_cmd(fsp);
1562 		break;
1563 
1564 	default:
1565 		FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1566 			   fsp, fsp->rport->port_id, error);
1567 		fsp->status_code = FC_CMD_PLOGO;
1568 		/* fall through */
1569 
1570 	case -FC_EX_TIMEOUT:
1571 		/*
1572 		 * Assume REC or LS_ACC was lost.
1573 		 * The exchange manager will have aborted REC, so retry.
1574 		 */
1575 		FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1576 			   fsp->rport->port_id, error, fsp->recov_retry,
1577 			   FC_MAX_RECOV_RETRY);
1578 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1579 			fc_fcp_rec(fsp);
1580 		else
1581 			fc_fcp_recovery(fsp);
1582 		break;
1583 	}
1584 	fc_fcp_unlock_pkt(fsp);
1585 out:
1586 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1587 }
1588 
1589 /**
1590  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1591  * @fsp: The FCP pkt that needs to be aborted
1592  */
1593 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp)
1594 {
1595 	fsp->status_code = FC_CMD_RECOVERY;
1596 	fsp->cdb_status = 0;
1597 	fsp->io_status = 0;
1598 	/*
1599 	 * if this fails then we let the scsi command timer fire and
1600 	 * scsi-ml escalate.
1601 	 */
1602 	fc_fcp_send_abort(fsp);
1603 }
1604 
1605 /**
1606  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1607  * @fsp:   The FCP packet the SRR is to be sent on
1608  * @r_ctl: The R_CTL field for the SRR request
1609  * This is called after receiving status but insufficient data, or
1610  * when expecting status but the request has timed out.
1611  */
1612 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1613 {
1614 	struct fc_lport *lport = fsp->lp;
1615 	struct fc_rport *rport;
1616 	struct fc_rport_libfc_priv *rpriv;
1617 	struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1618 	struct fc_seq *seq;
1619 	struct fcp_srr *srr;
1620 	struct fc_frame *fp;
1621 	u8 cdb_op;
1622 
1623 	rport = fsp->rport;
1624 	rpriv = rport->dd_data;
1625 	cdb_op = fsp->cdb_cmd.fc_cdb[0];
1626 
1627 	if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1628 	    rpriv->rp_state != RPORT_ST_READY)
1629 		goto retry;			/* shouldn't happen */
1630 	fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1631 	if (!fp)
1632 		goto retry;
1633 
1634 	srr = fc_frame_payload_get(fp, sizeof(*srr));
1635 	memset(srr, 0, sizeof(*srr));
1636 	srr->srr_op = ELS_SRR;
1637 	srr->srr_ox_id = htons(ep->oxid);
1638 	srr->srr_rx_id = htons(ep->rxid);
1639 	srr->srr_r_ctl = r_ctl;
1640 	srr->srr_rel_off = htonl(offset);
1641 
1642 	fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1643 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1644 		       FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1645 
1646 	seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL,
1647 				      fsp, jiffies_to_msecs(FC_SCSI_REC_TOV));
1648 	if (!seq)
1649 		goto retry;
1650 
1651 	fsp->recov_seq = seq;
1652 	fsp->xfer_len = offset;
1653 	fsp->xfer_contig_end = offset;
1654 	fsp->state &= ~FC_SRB_RCV_STATUS;
1655 	fc_fcp_pkt_hold(fsp);		/* hold for outstanding SRR */
1656 	return;
1657 retry:
1658 	fc_fcp_retry_cmd(fsp);
1659 }
1660 
1661 /**
1662  * fc_fcp_srr_resp() - Handler for SRR response
1663  * @seq: The sequence the SRR is on
1664  * @fp:	 The SRR frame
1665  * @arg: The FCP packet the SRR is on
1666  */
1667 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1668 {
1669 	struct fc_fcp_pkt *fsp = arg;
1670 	struct fc_frame_header *fh;
1671 
1672 	if (IS_ERR(fp)) {
1673 		fc_fcp_srr_error(fsp, fp);
1674 		return;
1675 	}
1676 
1677 	if (fc_fcp_lock_pkt(fsp))
1678 		goto out;
1679 
1680 	fh = fc_frame_header_get(fp);
1681 	/*
1682 	 * BUG? fc_fcp_srr_error calls exch_done which would release
1683 	 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1684 	 * then fc_exch_timeout would be sending an abort. The exch_done
1685 	 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1686 	 * an abort response though.
1687 	 */
1688 	if (fh->fh_type == FC_TYPE_BLS) {
1689 		fc_fcp_unlock_pkt(fsp);
1690 		return;
1691 	}
1692 
1693 	fsp->recov_seq = NULL;
1694 	switch (fc_frame_payload_op(fp)) {
1695 	case ELS_LS_ACC:
1696 		fsp->recov_retry = 0;
1697 		fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1698 		break;
1699 	case ELS_LS_RJT:
1700 	default:
1701 		fc_fcp_recovery(fsp);
1702 		break;
1703 	}
1704 	fc_fcp_unlock_pkt(fsp);
1705 	fsp->lp->tt.exch_done(seq);
1706 out:
1707 	fc_frame_free(fp);
1708 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding SRR */
1709 }
1710 
1711 /**
1712  * fc_fcp_srr_error() - Handler for SRR errors
1713  * @fsp: The FCP packet that the SRR error is on
1714  * @fp:	 The SRR frame
1715  */
1716 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1717 {
1718 	if (fc_fcp_lock_pkt(fsp))
1719 		goto out;
1720 	fsp->lp->tt.exch_done(fsp->recov_seq);
1721 	fsp->recov_seq = NULL;
1722 	switch (PTR_ERR(fp)) {
1723 	case -FC_EX_TIMEOUT:
1724 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1725 			fc_fcp_rec(fsp);
1726 		else
1727 			fc_fcp_recovery(fsp);
1728 		break;
1729 	case -FC_EX_CLOSED:			/* e.g., link failure */
1730 		/* fall through */
1731 	default:
1732 		fc_fcp_retry_cmd(fsp);
1733 		break;
1734 	}
1735 	fc_fcp_unlock_pkt(fsp);
1736 out:
1737 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding SRR */
1738 }
1739 
1740 /**
1741  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1742  * @lport: The local port to be checked
1743  */
1744 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1745 {
1746 	/* lock ? */
1747 	return (lport->state == LPORT_ST_READY) &&
1748 		lport->link_up && !lport->qfull;
1749 }
1750 
1751 /**
1752  * fc_queuecommand() - The queuecommand function of the SCSI template
1753  * @cmd:   The scsi_cmnd to be executed
1754  * @done:  The callback function to be called when the scsi_cmnd is complete
1755  *
1756  * This is the i/o strategy routine, called by the SCSI layer. This routine
1757  * is called with the host_lock held.
1758  */
1759 int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
1760 {
1761 	struct fc_lport *lport;
1762 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1763 	struct fc_fcp_pkt *fsp;
1764 	struct fc_rport_libfc_priv *rpriv;
1765 	int rval;
1766 	int rc = 0;
1767 	struct fcoe_dev_stats *stats;
1768 
1769 	lport = shost_priv(sc_cmd->device->host);
1770 	spin_unlock_irq(lport->host->host_lock);
1771 
1772 	rval = fc_remote_port_chkready(rport);
1773 	if (rval) {
1774 		sc_cmd->result = rval;
1775 		done(sc_cmd);
1776 		goto out;
1777 	}
1778 
1779 	if (!*(struct fc_remote_port **)rport->dd_data) {
1780 		/*
1781 		 * rport is transitioning from blocked/deleted to
1782 		 * online
1783 		 */
1784 		sc_cmd->result = DID_IMM_RETRY << 16;
1785 		done(sc_cmd);
1786 		goto out;
1787 	}
1788 
1789 	rpriv = rport->dd_data;
1790 
1791 	if (!fc_fcp_lport_queue_ready(lport)) {
1792 		if (lport->qfull)
1793 			fc_fcp_can_queue_ramp_down(lport);
1794 		rc = SCSI_MLQUEUE_HOST_BUSY;
1795 		goto out;
1796 	}
1797 
1798 	fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1799 	if (fsp == NULL) {
1800 		rc = SCSI_MLQUEUE_HOST_BUSY;
1801 		goto out;
1802 	}
1803 
1804 	/*
1805 	 * build the libfc request pkt
1806 	 */
1807 	fsp->cmd = sc_cmd;	/* save the cmd */
1808 	fsp->lp = lport;	/* save the softc ptr */
1809 	fsp->rport = rport;	/* set the remote port ptr */
1810 	fsp->xfer_ddp = FC_XID_UNKNOWN;
1811 	sc_cmd->scsi_done = done;
1812 
1813 	/*
1814 	 * set up the transfer length
1815 	 */
1816 	fsp->data_len = scsi_bufflen(sc_cmd);
1817 	fsp->xfer_len = 0;
1818 
1819 	/*
1820 	 * setup the data direction
1821 	 */
1822 	stats = per_cpu_ptr(lport->dev_stats, get_cpu());
1823 	if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1824 		fsp->req_flags = FC_SRB_READ;
1825 		stats->InputRequests++;
1826 		stats->InputMegabytes = fsp->data_len;
1827 	} else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1828 		fsp->req_flags = FC_SRB_WRITE;
1829 		stats->OutputRequests++;
1830 		stats->OutputMegabytes = fsp->data_len;
1831 	} else {
1832 		fsp->req_flags = 0;
1833 		stats->ControlRequests++;
1834 	}
1835 	put_cpu();
1836 
1837 	fsp->tgt_flags = rpriv->flags;
1838 
1839 	init_timer(&fsp->timer);
1840 	fsp->timer.data = (unsigned long)fsp;
1841 
1842 	/*
1843 	 * send it to the lower layer
1844 	 * if we get -1 return then put the request in the pending
1845 	 * queue.
1846 	 */
1847 	rval = fc_fcp_pkt_send(lport, fsp);
1848 	if (rval != 0) {
1849 		fsp->state = FC_SRB_FREE;
1850 		fc_fcp_pkt_release(fsp);
1851 		rc = SCSI_MLQUEUE_HOST_BUSY;
1852 	}
1853 out:
1854 	spin_lock_irq(lport->host->host_lock);
1855 	return rc;
1856 }
1857 EXPORT_SYMBOL(fc_queuecommand);
1858 
1859 /**
1860  * fc_io_compl() - Handle responses for completed commands
1861  * @fsp: The FCP packet that is complete
1862  *
1863  * Translates fcp_pkt errors to a Linux SCSI errors.
1864  * The fcp packet lock must be held when calling.
1865  */
1866 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1867 {
1868 	struct fc_fcp_internal *si;
1869 	struct scsi_cmnd *sc_cmd;
1870 	struct fc_lport *lport;
1871 	unsigned long flags;
1872 
1873 	/* release outstanding ddp context */
1874 	fc_fcp_ddp_done(fsp);
1875 
1876 	fsp->state |= FC_SRB_COMPL;
1877 	if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1878 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1879 		del_timer_sync(&fsp->timer);
1880 		spin_lock_bh(&fsp->scsi_pkt_lock);
1881 	}
1882 
1883 	lport = fsp->lp;
1884 	si = fc_get_scsi_internal(lport);
1885 	if (!fsp->cmd)
1886 		return;
1887 
1888 	/*
1889 	 * if can_queue ramp down is done then try can_queue ramp up
1890 	 * since commands are completing now.
1891 	 */
1892 	if (si->last_can_queue_ramp_down_time)
1893 		fc_fcp_can_queue_ramp_up(lport);
1894 
1895 	sc_cmd = fsp->cmd;
1896 	fsp->cmd = NULL;
1897 
1898 	if (!sc_cmd->SCp.ptr)
1899 		return;
1900 
1901 	CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1902 	switch (fsp->status_code) {
1903 	case FC_COMPLETE:
1904 		if (fsp->cdb_status == 0) {
1905 			/*
1906 			 * good I/O status
1907 			 */
1908 			sc_cmd->result = DID_OK << 16;
1909 			if (fsp->scsi_resid)
1910 				CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1911 		} else {
1912 			/*
1913 			 * transport level I/O was ok but scsi
1914 			 * has non zero status
1915 			 */
1916 			sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1917 		}
1918 		break;
1919 	case FC_ERROR:
1920 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1921 			   "due to FC_ERROR\n");
1922 		sc_cmd->result = DID_ERROR << 16;
1923 		break;
1924 	case FC_DATA_UNDRUN:
1925 		if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1926 			/*
1927 			 * scsi status is good but transport level
1928 			 * underrun.
1929 			 */
1930 			if (fsp->state & FC_SRB_RCV_STATUS) {
1931 				sc_cmd->result = DID_OK << 16;
1932 			} else {
1933 				FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1934 					   " due to FC_DATA_UNDRUN (trans)\n");
1935 				sc_cmd->result = DID_ERROR << 16;
1936 			}
1937 		} else {
1938 			/*
1939 			 * scsi got underrun, this is an error
1940 			 */
1941 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1942 				   "due to FC_DATA_UNDRUN (scsi)\n");
1943 			CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1944 			sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1945 		}
1946 		break;
1947 	case FC_DATA_OVRRUN:
1948 		/*
1949 		 * overrun is an error
1950 		 */
1951 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1952 			   "due to FC_DATA_OVRRUN\n");
1953 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1954 		break;
1955 	case FC_CMD_ABORTED:
1956 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1957 			   "due to FC_CMD_ABORTED\n");
1958 		sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1959 		break;
1960 	case FC_CMD_RECOVERY:
1961 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1962 		break;
1963 	case FC_CMD_RESET:
1964 		sc_cmd->result = (DID_RESET << 16);
1965 		break;
1966 	case FC_HRD_ERROR:
1967 		sc_cmd->result = (DID_NO_CONNECT << 16);
1968 		break;
1969 	default:
1970 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1971 			   "due to unknown error\n");
1972 		sc_cmd->result = (DID_ERROR << 16);
1973 		break;
1974 	}
1975 
1976 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1977 	list_del(&fsp->list);
1978 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1979 	sc_cmd->SCp.ptr = NULL;
1980 	sc_cmd->scsi_done(sc_cmd);
1981 
1982 	/* release ref from initial allocation in queue command */
1983 	fc_fcp_pkt_release(fsp);
1984 }
1985 
1986 /**
1987  * fc_eh_abort() - Abort a command
1988  * @sc_cmd: The SCSI command to abort
1989  *
1990  * From SCSI host template.
1991  * Send an ABTS to the target device and wait for the response.
1992  */
1993 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
1994 {
1995 	struct fc_fcp_pkt *fsp;
1996 	struct fc_lport *lport;
1997 	int rc = FAILED;
1998 	unsigned long flags;
1999 
2000 	lport = shost_priv(sc_cmd->device->host);
2001 	if (lport->state != LPORT_ST_READY)
2002 		return rc;
2003 	else if (!lport->link_up)
2004 		return rc;
2005 
2006 	spin_lock_irqsave(lport->host->host_lock, flags);
2007 	fsp = CMD_SP(sc_cmd);
2008 	if (!fsp) {
2009 		/* command completed while scsi eh was setting up */
2010 		spin_unlock_irqrestore(lport->host->host_lock, flags);
2011 		return SUCCESS;
2012 	}
2013 	/* grab a ref so the fsp and sc_cmd cannot be relased from under us */
2014 	fc_fcp_pkt_hold(fsp);
2015 	spin_unlock_irqrestore(lport->host->host_lock, flags);
2016 
2017 	if (fc_fcp_lock_pkt(fsp)) {
2018 		/* completed while we were waiting for timer to be deleted */
2019 		rc = SUCCESS;
2020 		goto release_pkt;
2021 	}
2022 
2023 	rc = fc_fcp_pkt_abort(fsp);
2024 	fc_fcp_unlock_pkt(fsp);
2025 
2026 release_pkt:
2027 	fc_fcp_pkt_release(fsp);
2028 	return rc;
2029 }
2030 EXPORT_SYMBOL(fc_eh_abort);
2031 
2032 /**
2033  * fc_eh_device_reset() - Reset a single LUN
2034  * @sc_cmd: The SCSI command which identifies the device whose
2035  *	    LUN is to be reset
2036  *
2037  * Set from SCSI host template.
2038  */
2039 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2040 {
2041 	struct fc_lport *lport;
2042 	struct fc_fcp_pkt *fsp;
2043 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2044 	int rc = FAILED;
2045 	int rval;
2046 
2047 	rval = fc_remote_port_chkready(rport);
2048 	if (rval)
2049 		goto out;
2050 
2051 	lport = shost_priv(sc_cmd->device->host);
2052 
2053 	if (lport->state != LPORT_ST_READY)
2054 		return rc;
2055 
2056 	FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2057 
2058 	fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2059 	if (fsp == NULL) {
2060 		printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2061 		goto out;
2062 	}
2063 
2064 	/*
2065 	 * Build the libfc request pkt. Do not set the scsi cmnd, because
2066 	 * the sc passed in is not setup for execution like when sent
2067 	 * through the queuecommand callout.
2068 	 */
2069 	fsp->lp = lport;	/* save the softc ptr */
2070 	fsp->rport = rport;	/* set the remote port ptr */
2071 
2072 	/*
2073 	 * flush outstanding commands
2074 	 */
2075 	rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2076 	fsp->state = FC_SRB_FREE;
2077 	fc_fcp_pkt_release(fsp);
2078 
2079 out:
2080 	return rc;
2081 }
2082 EXPORT_SYMBOL(fc_eh_device_reset);
2083 
2084 /**
2085  * fc_eh_host_reset() - Reset a Scsi_Host.
2086  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2087  */
2088 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2089 {
2090 	struct Scsi_Host *shost = sc_cmd->device->host;
2091 	struct fc_lport *lport = shost_priv(shost);
2092 	unsigned long wait_tmo;
2093 
2094 	FC_SCSI_DBG(lport, "Resetting host\n");
2095 
2096 	lport->tt.lport_reset(lport);
2097 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2098 	while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2099 							       wait_tmo))
2100 		msleep(1000);
2101 
2102 	if (fc_fcp_lport_queue_ready(lport)) {
2103 		shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2104 			     "on port (%6.6x)\n", lport->port_id);
2105 		return SUCCESS;
2106 	} else {
2107 		shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2108 			     "port (%6.6x) is not ready.\n",
2109 			     lport->port_id);
2110 		return FAILED;
2111 	}
2112 }
2113 EXPORT_SYMBOL(fc_eh_host_reset);
2114 
2115 /**
2116  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2117  * @sdev: The SCSI device that identifies the SCSI host
2118  *
2119  * Configures queue depth based on host's cmd_per_len. If not set
2120  * then we use the libfc default.
2121  */
2122 int fc_slave_alloc(struct scsi_device *sdev)
2123 {
2124 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2125 
2126 	if (!rport || fc_remote_port_chkready(rport))
2127 		return -ENXIO;
2128 
2129 	if (sdev->tagged_supported)
2130 		scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2131 	else
2132 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
2133 					FC_FCP_DFLT_QUEUE_DEPTH);
2134 
2135 	return 0;
2136 }
2137 EXPORT_SYMBOL(fc_slave_alloc);
2138 
2139 /**
2140  * fc_change_queue_depth() - Change a device's queue depth
2141  * @sdev:   The SCSI device whose queue depth is to change
2142  * @qdepth: The new queue depth
2143  * @reason: The resason for the change
2144  */
2145 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2146 {
2147 	switch (reason) {
2148 	case SCSI_QDEPTH_DEFAULT:
2149 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2150 		break;
2151 	case SCSI_QDEPTH_QFULL:
2152 		scsi_track_queue_full(sdev, qdepth);
2153 		break;
2154 	case SCSI_QDEPTH_RAMP_UP:
2155 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2156 		break;
2157 	default:
2158 		return -EOPNOTSUPP;
2159 	}
2160 	return sdev->queue_depth;
2161 }
2162 EXPORT_SYMBOL(fc_change_queue_depth);
2163 
2164 /**
2165  * fc_change_queue_type() - Change a device's queue type
2166  * @sdev:     The SCSI device whose queue depth is to change
2167  * @tag_type: Identifier for queue type
2168  */
2169 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2170 {
2171 	if (sdev->tagged_supported) {
2172 		scsi_set_tag_type(sdev, tag_type);
2173 		if (tag_type)
2174 			scsi_activate_tcq(sdev, sdev->queue_depth);
2175 		else
2176 			scsi_deactivate_tcq(sdev, sdev->queue_depth);
2177 	} else
2178 		tag_type = 0;
2179 
2180 	return tag_type;
2181 }
2182 EXPORT_SYMBOL(fc_change_queue_type);
2183 
2184 /**
2185  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2186  * @lport: The local port that no longer needs the FCP layer
2187  */
2188 void fc_fcp_destroy(struct fc_lport *lport)
2189 {
2190 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2191 
2192 	if (!list_empty(&si->scsi_pkt_queue))
2193 		printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2194 		       "port (%6.6x)\n", lport->port_id);
2195 
2196 	mempool_destroy(si->scsi_pkt_pool);
2197 	kfree(si);
2198 	lport->scsi_priv = NULL;
2199 }
2200 EXPORT_SYMBOL(fc_fcp_destroy);
2201 
2202 int fc_setup_fcp()
2203 {
2204 	int rc = 0;
2205 
2206 	scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2207 					    sizeof(struct fc_fcp_pkt),
2208 					    0, SLAB_HWCACHE_ALIGN, NULL);
2209 	if (!scsi_pkt_cachep) {
2210 		printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2211 		       "module load failed!");
2212 		rc = -ENOMEM;
2213 	}
2214 
2215 	return rc;
2216 }
2217 
2218 void fc_destroy_fcp()
2219 {
2220 	if (scsi_pkt_cachep)
2221 		kmem_cache_destroy(scsi_pkt_cachep);
2222 }
2223 
2224 /**
2225  * fc_fcp_init() - Initialize the FCP layer for a local port
2226  * @lport: The local port to initialize the exchange layer for
2227  */
2228 int fc_fcp_init(struct fc_lport *lport)
2229 {
2230 	int rc;
2231 	struct fc_fcp_internal *si;
2232 
2233 	if (!lport->tt.fcp_cmd_send)
2234 		lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2235 
2236 	if (!lport->tt.fcp_cleanup)
2237 		lport->tt.fcp_cleanup = fc_fcp_cleanup;
2238 
2239 	if (!lport->tt.fcp_abort_io)
2240 		lport->tt.fcp_abort_io = fc_fcp_abort_io;
2241 
2242 	si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2243 	if (!si)
2244 		return -ENOMEM;
2245 	lport->scsi_priv = si;
2246 	si->max_can_queue = lport->host->can_queue;
2247 	INIT_LIST_HEAD(&si->scsi_pkt_queue);
2248 	spin_lock_init(&si->scsi_queue_lock);
2249 
2250 	si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2251 	if (!si->scsi_pkt_pool) {
2252 		rc = -ENOMEM;
2253 		goto free_internal;
2254 	}
2255 	return 0;
2256 
2257 free_internal:
2258 	kfree(si);
2259 	return rc;
2260 }
2261 EXPORT_SYMBOL(fc_fcp_init);
2262