xref: /openbmc/linux/drivers/scsi/libfc/fc_fcp.c (revision c40ecc12)
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21 
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31 
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37 
38 #include <scsi/fc/fc_fc2.h>
39 
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42 
43 #include "fc_libfc.h"
44 
45 static struct kmem_cache *scsi_pkt_cachep;
46 
47 /* SRB state definitions */
48 #define FC_SRB_FREE		0		/* cmd is free */
49 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
50 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
51 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
52 #define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
53 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
54 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
56 
57 #define FC_SRB_READ		(1 << 1)
58 #define FC_SRB_WRITE		(1 << 0)
59 
60 /*
61  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
62  */
63 #define CMD_SP(Cmnd)		    ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
64 #define CMD_ENTRY_STATUS(Cmnd)	    ((Cmnd)->SCp.have_data_in)
65 #define CMD_COMPL_STATUS(Cmnd)	    ((Cmnd)->SCp.this_residual)
66 #define CMD_SCSI_STATUS(Cmnd)	    ((Cmnd)->SCp.Status)
67 #define CMD_RESID_LEN(Cmnd)	    ((Cmnd)->SCp.buffers_residual)
68 
69 /**
70  * struct fc_fcp_internal - FCP layer internal data
71  * @scsi_pkt_pool: Memory pool to draw FCP packets from
72  * @scsi_queue_lock: Protects the scsi_pkt_queue
73  * @scsi_pkt_queue: Current FCP packets
74  * @last_can_queue_ramp_down_time: ramp down time
75  * @last_can_queue_ramp_up_time: ramp up time
76  * @max_can_queue: max can_queue size
77  */
78 struct fc_fcp_internal {
79 	mempool_t		*scsi_pkt_pool;
80 	spinlock_t		scsi_queue_lock;
81 	struct list_head	scsi_pkt_queue;
82 	unsigned long		last_can_queue_ramp_down_time;
83 	unsigned long		last_can_queue_ramp_up_time;
84 	int			max_can_queue;
85 };
86 
87 #define fc_get_scsi_internal(x)	((struct fc_fcp_internal *)(x)->scsi_priv)
88 
89 /*
90  * function prototypes
91  * FC scsi I/O related functions
92  */
93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
100 static void fc_fcp_timeout(unsigned long);
101 static void fc_fcp_rec(struct fc_fcp_pkt *);
102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
104 static void fc_io_compl(struct fc_fcp_pkt *);
105 
106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
109 
110 /*
111  * command status codes
112  */
113 #define FC_COMPLETE		0
114 #define FC_CMD_ABORTED		1
115 #define FC_CMD_RESET		2
116 #define FC_CMD_PLOGO		3
117 #define FC_SNS_RCV		4
118 #define FC_TRANS_ERR		5
119 #define FC_DATA_OVRRUN		6
120 #define FC_DATA_UNDRUN		7
121 #define FC_ERROR		8
122 #define FC_HRD_ERROR		9
123 #define FC_CRC_ERROR		10
124 #define FC_TIMED_OUT		11
125 
126 /*
127  * Error recovery timeout values.
128  */
129 #define FC_SCSI_TM_TOV		(10 * HZ)
130 #define FC_HOST_RESET_TIMEOUT	(30 * HZ)
131 #define FC_CAN_QUEUE_PERIOD	(60 * HZ)
132 
133 #define FC_MAX_ERROR_CNT	5
134 #define FC_MAX_RECOV_RETRY	3
135 
136 #define FC_FCP_DFLT_QUEUE_DEPTH 32
137 
138 /**
139  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
140  * @lport: The local port that the FCP packet is for
141  * @gfp:   GFP flags for allocation
142  *
143  * Return value: fcp_pkt structure or null on allocation failure.
144  * Context:	 Can be called from process context, no lock is required.
145  */
146 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
147 {
148 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
149 	struct fc_fcp_pkt *fsp;
150 
151 	fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
152 	if (fsp) {
153 		memset(fsp, 0, sizeof(*fsp));
154 		fsp->lp = lport;
155 		fsp->xfer_ddp = FC_XID_UNKNOWN;
156 		atomic_set(&fsp->ref_cnt, 1);
157 		init_timer(&fsp->timer);
158 		fsp->timer.data = (unsigned long)fsp;
159 		INIT_LIST_HEAD(&fsp->list);
160 		spin_lock_init(&fsp->scsi_pkt_lock);
161 	} else {
162 		per_cpu_ptr(lport->stats, get_cpu())->FcpPktAllocFails++;
163 		put_cpu();
164 	}
165 	return fsp;
166 }
167 
168 /**
169  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
170  * @fsp: The FCP packet to be released
171  *
172  * Context: Can be called from process or interrupt context,
173  *	    no lock is required.
174  */
175 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
176 {
177 	if (atomic_dec_and_test(&fsp->ref_cnt)) {
178 		struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
179 
180 		mempool_free(fsp, si->scsi_pkt_pool);
181 	}
182 }
183 
184 /**
185  * fc_fcp_pkt_hold() - Hold a fcp_pkt
186  * @fsp: The FCP packet to be held
187  */
188 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
189 {
190 	atomic_inc(&fsp->ref_cnt);
191 }
192 
193 /**
194  * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
195  * @seq: The sequence that the FCP packet is on (required by destructor API)
196  * @fsp: The FCP packet to be released
197  *
198  * This routine is called by a destructor callback in the exch_seq_send()
199  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
200  * argument even though it is not used by this routine.
201  *
202  * Context: No locking required.
203  */
204 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
205 {
206 	fc_fcp_pkt_release(fsp);
207 }
208 
209 /**
210  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
211  * @fsp: The FCP packet to be locked and incremented
212  *
213  * We should only return error if we return a command to SCSI-ml before
214  * getting a response. This can happen in cases where we send a abort, but
215  * do not wait for the response and the abort and command can be passing
216  * each other on the wire/network-layer.
217  *
218  * Note: this function locks the packet and gets a reference to allow
219  * callers to call the completion function while the lock is held and
220  * not have to worry about the packets refcount.
221  *
222  * TODO: Maybe we should just have callers grab/release the lock and
223  * have a function that they call to verify the fsp and grab a ref if
224  * needed.
225  */
226 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
227 {
228 	spin_lock_bh(&fsp->scsi_pkt_lock);
229 	if (fsp->state & FC_SRB_COMPL) {
230 		spin_unlock_bh(&fsp->scsi_pkt_lock);
231 		return -EPERM;
232 	}
233 
234 	fc_fcp_pkt_hold(fsp);
235 	return 0;
236 }
237 
238 /**
239  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
240  *			 reference count
241  * @fsp: The FCP packet to be unlocked and decremented
242  */
243 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
244 {
245 	spin_unlock_bh(&fsp->scsi_pkt_lock);
246 	fc_fcp_pkt_release(fsp);
247 }
248 
249 /**
250  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
251  * @fsp:   The FCP packet to start a timer for
252  * @delay: The timeout period in jiffies
253  */
254 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
255 {
256 	if (!(fsp->state & FC_SRB_COMPL))
257 		mod_timer(&fsp->timer, jiffies + delay);
258 }
259 
260 /**
261  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
262  *			 fcp_pkt
263  * @fsp: The FCP packet to abort exchanges on
264  */
265 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
266 {
267 	if (!fsp->seq_ptr)
268 		return -EINVAL;
269 
270 	per_cpu_ptr(fsp->lp->stats, get_cpu())->FcpPktAborts++;
271 	put_cpu();
272 
273 	fsp->state |= FC_SRB_ABORT_PENDING;
274 	return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
275 }
276 
277 /**
278  * fc_fcp_retry_cmd() - Retry a fcp_pkt
279  * @fsp: The FCP packet to be retried
280  *
281  * Sets the status code to be FC_ERROR and then calls
282  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
283  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
284  * The SCSI-ml will retry the command.
285  */
286 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
287 {
288 	if (fsp->seq_ptr) {
289 		fsp->lp->tt.exch_done(fsp->seq_ptr);
290 		fsp->seq_ptr = NULL;
291 	}
292 
293 	fsp->state &= ~FC_SRB_ABORT_PENDING;
294 	fsp->io_status = 0;
295 	fsp->status_code = FC_ERROR;
296 	fc_fcp_complete_locked(fsp);
297 }
298 
299 /**
300  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
301  * @fsp: The FCP packet that will manage the DDP frames
302  * @xid: The XID that will be used for the DDP exchange
303  */
304 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
305 {
306 	struct fc_lport *lport;
307 
308 	lport = fsp->lp;
309 	if ((fsp->req_flags & FC_SRB_READ) &&
310 	    (lport->lro_enabled) && (lport->tt.ddp_setup)) {
311 		if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
312 					scsi_sg_count(fsp->cmd)))
313 			fsp->xfer_ddp = xid;
314 	}
315 }
316 
317 /**
318  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
319  *		       DDP related resources for a fcp_pkt
320  * @fsp: The FCP packet that DDP had been used on
321  */
322 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
323 {
324 	struct fc_lport *lport;
325 
326 	if (!fsp)
327 		return;
328 
329 	if (fsp->xfer_ddp == FC_XID_UNKNOWN)
330 		return;
331 
332 	lport = fsp->lp;
333 	if (lport->tt.ddp_done) {
334 		fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
335 		fsp->xfer_ddp = FC_XID_UNKNOWN;
336 	}
337 }
338 
339 /**
340  * fc_fcp_can_queue_ramp_up() - increases can_queue
341  * @lport: lport to ramp up can_queue
342  */
343 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
344 {
345 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
346 	unsigned long flags;
347 	int can_queue;
348 
349 	spin_lock_irqsave(lport->host->host_lock, flags);
350 
351 	if (si->last_can_queue_ramp_up_time &&
352 	    (time_before(jiffies, si->last_can_queue_ramp_up_time +
353 			 FC_CAN_QUEUE_PERIOD)))
354 		goto unlock;
355 
356 	if (time_before(jiffies, si->last_can_queue_ramp_down_time +
357 			FC_CAN_QUEUE_PERIOD))
358 		goto unlock;
359 
360 	si->last_can_queue_ramp_up_time = jiffies;
361 
362 	can_queue = lport->host->can_queue << 1;
363 	if (can_queue >= si->max_can_queue) {
364 		can_queue = si->max_can_queue;
365 		si->last_can_queue_ramp_down_time = 0;
366 	}
367 	lport->host->can_queue = can_queue;
368 	shost_printk(KERN_ERR, lport->host, "libfc: increased "
369 		     "can_queue to %d.\n", can_queue);
370 
371 unlock:
372 	spin_unlock_irqrestore(lport->host->host_lock, flags);
373 }
374 
375 /**
376  * fc_fcp_can_queue_ramp_down() - reduces can_queue
377  * @lport: lport to reduce can_queue
378  *
379  * If we are getting memory allocation failures, then we may
380  * be trying to execute too many commands. We let the running
381  * commands complete or timeout, then try again with a reduced
382  * can_queue. Eventually we will hit the point where we run
383  * on all reserved structs.
384  */
385 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
386 {
387 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
388 	unsigned long flags;
389 	int can_queue;
390 
391 	spin_lock_irqsave(lport->host->host_lock, flags);
392 
393 	if (si->last_can_queue_ramp_down_time &&
394 	    (time_before(jiffies, si->last_can_queue_ramp_down_time +
395 			 FC_CAN_QUEUE_PERIOD)))
396 		goto unlock;
397 
398 	si->last_can_queue_ramp_down_time = jiffies;
399 
400 	can_queue = lport->host->can_queue;
401 	can_queue >>= 1;
402 	if (!can_queue)
403 		can_queue = 1;
404 	lport->host->can_queue = can_queue;
405 	shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
406 		     "Reducing can_queue to %d.\n", can_queue);
407 
408 unlock:
409 	spin_unlock_irqrestore(lport->host->host_lock, flags);
410 }
411 
412 /*
413  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
414  * @lport:	fc lport struct
415  * @len:	payload length
416  *
417  * Allocates fc_frame structure and buffer but if fails to allocate
418  * then reduce can_queue.
419  */
420 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
421 						  size_t len)
422 {
423 	struct fc_frame *fp;
424 
425 	fp = fc_frame_alloc(lport, len);
426 	if (likely(fp))
427 		return fp;
428 
429 	per_cpu_ptr(lport->stats, get_cpu())->FcpFrameAllocFails++;
430 	put_cpu();
431 	/* error case */
432 	fc_fcp_can_queue_ramp_down(lport);
433 	return NULL;
434 }
435 
436 /**
437  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
438  * @fsp: The FCP packet the data is on
439  * @fp:	 The data frame
440  */
441 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
442 {
443 	struct scsi_cmnd *sc = fsp->cmd;
444 	struct fc_lport *lport = fsp->lp;
445 	struct fc_stats *stats;
446 	struct fc_frame_header *fh;
447 	size_t start_offset;
448 	size_t offset;
449 	u32 crc;
450 	u32 copy_len = 0;
451 	size_t len;
452 	void *buf;
453 	struct scatterlist *sg;
454 	u32 nents;
455 	u8 host_bcode = FC_COMPLETE;
456 
457 	fh = fc_frame_header_get(fp);
458 	offset = ntohl(fh->fh_parm_offset);
459 	start_offset = offset;
460 	len = fr_len(fp) - sizeof(*fh);
461 	buf = fc_frame_payload_get(fp, 0);
462 
463 	/*
464 	 * if this I/O is ddped then clear it and initiate recovery since data
465 	 * frames are expected to be placed directly in that case.
466 	 *
467 	 * Indicate error to scsi-ml because something went wrong with the
468 	 * ddp handling to get us here.
469 	 */
470 	if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
471 		fc_fcp_ddp_done(fsp);
472 		FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
473 		host_bcode = FC_ERROR;
474 		goto err;
475 	}
476 	if (offset + len > fsp->data_len) {
477 		/* this should never happen */
478 		if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
479 		    fc_frame_crc_check(fp))
480 			goto crc_err;
481 		FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
482 			   "data_len %x\n", len, offset, fsp->data_len);
483 
484 		/* Data is corrupted indicate scsi-ml should retry */
485 		host_bcode = FC_DATA_OVRRUN;
486 		goto err;
487 	}
488 	if (offset != fsp->xfer_len)
489 		fsp->state |= FC_SRB_DISCONTIG;
490 
491 	sg = scsi_sglist(sc);
492 	nents = scsi_sg_count(sc);
493 
494 	if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
495 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
496 						    &offset, NULL);
497 	} else {
498 		crc = crc32(~0, (u8 *) fh, sizeof(*fh));
499 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
500 						    &offset, &crc);
501 		buf = fc_frame_payload_get(fp, 0);
502 		if (len % 4)
503 			crc = crc32(crc, buf + len, 4 - (len % 4));
504 
505 		if (~crc != le32_to_cpu(fr_crc(fp))) {
506 crc_err:
507 			stats = per_cpu_ptr(lport->stats, get_cpu());
508 			stats->ErrorFrames++;
509 			/* per cpu count, not total count, but OK for limit */
510 			if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
511 				printk(KERN_WARNING "libfc: CRC error on data "
512 				       "frame for port (%6.6x)\n",
513 				       lport->port_id);
514 			put_cpu();
515 			/*
516 			 * Assume the frame is total garbage.
517 			 * We may have copied it over the good part
518 			 * of the buffer.
519 			 * If so, we need to retry the entire operation.
520 			 * Otherwise, ignore it.
521 			 */
522 			if (fsp->state & FC_SRB_DISCONTIG) {
523 				host_bcode = FC_CRC_ERROR;
524 				goto err;
525 			}
526 			return;
527 		}
528 	}
529 
530 	if (fsp->xfer_contig_end == start_offset)
531 		fsp->xfer_contig_end += copy_len;
532 	fsp->xfer_len += copy_len;
533 
534 	/*
535 	 * In the very rare event that this data arrived after the response
536 	 * and completes the transfer, call the completion handler.
537 	 */
538 	if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
539 	    fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
540 		fc_fcp_complete_locked(fsp);
541 	return;
542 err:
543 	fc_fcp_recovery(fsp, host_bcode);
544 }
545 
546 /**
547  * fc_fcp_send_data() - Send SCSI data to a target
548  * @fsp:      The FCP packet the data is on
549  * @sp:	      The sequence the data is to be sent on
550  * @offset:   The starting offset for this data request
551  * @seq_blen: The burst length for this data request
552  *
553  * Called after receiving a Transfer Ready data descriptor.
554  * If the LLD is capable of sequence offload then send down the
555  * seq_blen amount of data in single frame, otherwise send
556  * multiple frames of the maximum frame payload supported by
557  * the target port.
558  */
559 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
560 			    size_t offset, size_t seq_blen)
561 {
562 	struct fc_exch *ep;
563 	struct scsi_cmnd *sc;
564 	struct scatterlist *sg;
565 	struct fc_frame *fp = NULL;
566 	struct fc_lport *lport = fsp->lp;
567 	struct page *page;
568 	size_t remaining;
569 	size_t t_blen;
570 	size_t tlen;
571 	size_t sg_bytes;
572 	size_t frame_offset, fh_parm_offset;
573 	size_t off;
574 	int error;
575 	void *data = NULL;
576 	void *page_addr;
577 	int using_sg = lport->sg_supp;
578 	u32 f_ctl;
579 
580 	WARN_ON(seq_blen <= 0);
581 	if (unlikely(offset + seq_blen > fsp->data_len)) {
582 		/* this should never happen */
583 		FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
584 			   "offset %zx\n", seq_blen, offset);
585 		fc_fcp_send_abort(fsp);
586 		return 0;
587 	} else if (offset != fsp->xfer_len) {
588 		/* Out of Order Data Request - no problem, but unexpected. */
589 		FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
590 			   "seq_blen %zx offset %zx\n", seq_blen, offset);
591 	}
592 
593 	/*
594 	 * if LLD is capable of seq_offload then set transport
595 	 * burst length (t_blen) to seq_blen, otherwise set t_blen
596 	 * to max FC frame payload previously set in fsp->max_payload.
597 	 */
598 	t_blen = fsp->max_payload;
599 	if (lport->seq_offload) {
600 		t_blen = min(seq_blen, (size_t)lport->lso_max);
601 		FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
602 			   fsp, seq_blen, lport->lso_max, t_blen);
603 	}
604 
605 	if (t_blen > 512)
606 		t_blen &= ~(512 - 1);	/* round down to block size */
607 	sc = fsp->cmd;
608 
609 	remaining = seq_blen;
610 	fh_parm_offset = frame_offset = offset;
611 	tlen = 0;
612 	seq = lport->tt.seq_start_next(seq);
613 	f_ctl = FC_FC_REL_OFF;
614 	WARN_ON(!seq);
615 
616 	sg = scsi_sglist(sc);
617 
618 	while (remaining > 0 && sg) {
619 		if (offset >= sg->length) {
620 			offset -= sg->length;
621 			sg = sg_next(sg);
622 			continue;
623 		}
624 		if (!fp) {
625 			tlen = min(t_blen, remaining);
626 
627 			/*
628 			 * TODO.  Temporary workaround.	 fc_seq_send() can't
629 			 * handle odd lengths in non-linear skbs.
630 			 * This will be the final fragment only.
631 			 */
632 			if (tlen % 4)
633 				using_sg = 0;
634 			fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
635 			if (!fp)
636 				return -ENOMEM;
637 
638 			data = fc_frame_header_get(fp) + 1;
639 			fh_parm_offset = frame_offset;
640 			fr_max_payload(fp) = fsp->max_payload;
641 		}
642 
643 		off = offset + sg->offset;
644 		sg_bytes = min(tlen, sg->length - offset);
645 		sg_bytes = min(sg_bytes,
646 			       (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
647 		page = sg_page(sg) + (off >> PAGE_SHIFT);
648 		if (using_sg) {
649 			get_page(page);
650 			skb_fill_page_desc(fp_skb(fp),
651 					   skb_shinfo(fp_skb(fp))->nr_frags,
652 					   page, off & ~PAGE_MASK, sg_bytes);
653 			fp_skb(fp)->data_len += sg_bytes;
654 			fr_len(fp) += sg_bytes;
655 			fp_skb(fp)->truesize += PAGE_SIZE;
656 		} else {
657 			/*
658 			 * The scatterlist item may be bigger than PAGE_SIZE,
659 			 * but we must not cross pages inside the kmap.
660 			 */
661 			page_addr = kmap_atomic(page);
662 			memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
663 			       sg_bytes);
664 			kunmap_atomic(page_addr);
665 			data += sg_bytes;
666 		}
667 		offset += sg_bytes;
668 		frame_offset += sg_bytes;
669 		tlen -= sg_bytes;
670 		remaining -= sg_bytes;
671 
672 		if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
673 		    (tlen))
674 			continue;
675 
676 		/*
677 		 * Send sequence with transfer sequence initiative in case
678 		 * this is last FCP frame of the sequence.
679 		 */
680 		if (remaining == 0)
681 			f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
682 
683 		ep = fc_seq_exch(seq);
684 		fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
685 			       FC_TYPE_FCP, f_ctl, fh_parm_offset);
686 
687 		/*
688 		 * send fragment using for a sequence.
689 		 */
690 		error = lport->tt.seq_send(lport, seq, fp);
691 		if (error) {
692 			WARN_ON(1);		/* send error should be rare */
693 			return error;
694 		}
695 		fp = NULL;
696 	}
697 	fsp->xfer_len += seq_blen;	/* premature count? */
698 	return 0;
699 }
700 
701 /**
702  * fc_fcp_abts_resp() - Receive an ABTS response
703  * @fsp: The FCP packet that is being aborted
704  * @fp:	 The response frame
705  */
706 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
707 {
708 	int ba_done = 1;
709 	struct fc_ba_rjt *brp;
710 	struct fc_frame_header *fh;
711 
712 	fh = fc_frame_header_get(fp);
713 	switch (fh->fh_r_ctl) {
714 	case FC_RCTL_BA_ACC:
715 		break;
716 	case FC_RCTL_BA_RJT:
717 		brp = fc_frame_payload_get(fp, sizeof(*brp));
718 		if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
719 			break;
720 		/* fall thru */
721 	default:
722 		/*
723 		 * we will let the command timeout
724 		 * and scsi-ml recover in this case,
725 		 * therefore cleared the ba_done flag.
726 		 */
727 		ba_done = 0;
728 	}
729 
730 	if (ba_done) {
731 		fsp->state |= FC_SRB_ABORTED;
732 		fsp->state &= ~FC_SRB_ABORT_PENDING;
733 
734 		if (fsp->wait_for_comp)
735 			complete(&fsp->tm_done);
736 		else
737 			fc_fcp_complete_locked(fsp);
738 	}
739 }
740 
741 /**
742  * fc_fcp_recv() - Receive an FCP frame
743  * @seq: The sequence the frame is on
744  * @fp:	 The received frame
745  * @arg: The related FCP packet
746  *
747  * Context: Called from Soft IRQ context. Can not be called
748  *	    holding the FCP packet list lock.
749  */
750 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
751 {
752 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
753 	struct fc_lport *lport = fsp->lp;
754 	struct fc_frame_header *fh;
755 	struct fcp_txrdy *dd;
756 	u8 r_ctl;
757 	int rc = 0;
758 
759 	if (IS_ERR(fp)) {
760 		fc_fcp_error(fsp, fp);
761 		return;
762 	}
763 
764 	fh = fc_frame_header_get(fp);
765 	r_ctl = fh->fh_r_ctl;
766 
767 	if (lport->state != LPORT_ST_READY)
768 		goto out;
769 	if (fc_fcp_lock_pkt(fsp))
770 		goto out;
771 
772 	if (fh->fh_type == FC_TYPE_BLS) {
773 		fc_fcp_abts_resp(fsp, fp);
774 		goto unlock;
775 	}
776 
777 	if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
778 		goto unlock;
779 
780 	if (r_ctl == FC_RCTL_DD_DATA_DESC) {
781 		/*
782 		 * received XFER RDY from the target
783 		 * need to send data to the target
784 		 */
785 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
786 		dd = fc_frame_payload_get(fp, sizeof(*dd));
787 		WARN_ON(!dd);
788 
789 		rc = fc_fcp_send_data(fsp, seq,
790 				      (size_t) ntohl(dd->ft_data_ro),
791 				      (size_t) ntohl(dd->ft_burst_len));
792 		if (!rc)
793 			seq->rec_data = fsp->xfer_len;
794 	} else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
795 		/*
796 		 * received a DATA frame
797 		 * next we will copy the data to the system buffer
798 		 */
799 		WARN_ON(fr_len(fp) < sizeof(*fh));	/* len may be 0 */
800 		fc_fcp_recv_data(fsp, fp);
801 		seq->rec_data = fsp->xfer_contig_end;
802 	} else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
803 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
804 
805 		fc_fcp_resp(fsp, fp);
806 	} else {
807 		FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
808 	}
809 unlock:
810 	fc_fcp_unlock_pkt(fsp);
811 out:
812 	fc_frame_free(fp);
813 }
814 
815 /**
816  * fc_fcp_resp() - Handler for FCP responses
817  * @fsp: The FCP packet the response is for
818  * @fp:	 The response frame
819  */
820 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
821 {
822 	struct fc_frame_header *fh;
823 	struct fcp_resp *fc_rp;
824 	struct fcp_resp_ext *rp_ex;
825 	struct fcp_resp_rsp_info *fc_rp_info;
826 	u32 plen;
827 	u32 expected_len;
828 	u32 respl = 0;
829 	u32 snsl = 0;
830 	u8 flags = 0;
831 
832 	plen = fr_len(fp);
833 	fh = (struct fc_frame_header *)fr_hdr(fp);
834 	if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
835 		goto len_err;
836 	plen -= sizeof(*fh);
837 	fc_rp = (struct fcp_resp *)(fh + 1);
838 	fsp->cdb_status = fc_rp->fr_status;
839 	flags = fc_rp->fr_flags;
840 	fsp->scsi_comp_flags = flags;
841 	expected_len = fsp->data_len;
842 
843 	/* if ddp, update xfer len */
844 	fc_fcp_ddp_done(fsp);
845 
846 	if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
847 		rp_ex = (void *)(fc_rp + 1);
848 		if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
849 			if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
850 				goto len_err;
851 			fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
852 			if (flags & FCP_RSP_LEN_VAL) {
853 				respl = ntohl(rp_ex->fr_rsp_len);
854 				if ((respl != FCP_RESP_RSP_INFO_LEN4) &&
855 				    (respl != FCP_RESP_RSP_INFO_LEN8))
856 					goto len_err;
857 				if (fsp->wait_for_comp) {
858 					/* Abuse cdb_status for rsp code */
859 					fsp->cdb_status = fc_rp_info->rsp_code;
860 					complete(&fsp->tm_done);
861 					/*
862 					 * tmfs will not have any scsi cmd so
863 					 * exit here
864 					 */
865 					return;
866 				}
867 			}
868 			if (flags & FCP_SNS_LEN_VAL) {
869 				snsl = ntohl(rp_ex->fr_sns_len);
870 				if (snsl > SCSI_SENSE_BUFFERSIZE)
871 					snsl = SCSI_SENSE_BUFFERSIZE;
872 				memcpy(fsp->cmd->sense_buffer,
873 				       (char *)fc_rp_info + respl, snsl);
874 			}
875 		}
876 		if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
877 			if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
878 				goto len_err;
879 			if (flags & FCP_RESID_UNDER) {
880 				fsp->scsi_resid = ntohl(rp_ex->fr_resid);
881 				/*
882 				 * The cmnd->underflow is the minimum number of
883 				 * bytes that must be transferred for this
884 				 * command.  Provided a sense condition is not
885 				 * present, make sure the actual amount
886 				 * transferred is at least the underflow value
887 				 * or fail.
888 				 */
889 				if (!(flags & FCP_SNS_LEN_VAL) &&
890 				    (fc_rp->fr_status == 0) &&
891 				    (scsi_bufflen(fsp->cmd) -
892 				     fsp->scsi_resid) < fsp->cmd->underflow)
893 					goto err;
894 				expected_len -= fsp->scsi_resid;
895 			} else {
896 				fsp->status_code = FC_ERROR;
897 			}
898 		}
899 	}
900 	fsp->state |= FC_SRB_RCV_STATUS;
901 
902 	/*
903 	 * Check for missing or extra data frames.
904 	 */
905 	if (unlikely(fsp->cdb_status == SAM_STAT_GOOD &&
906 		     fsp->xfer_len != expected_len)) {
907 		if (fsp->xfer_len < expected_len) {
908 			/*
909 			 * Some data may be queued locally,
910 			 * Wait a at least one jiffy to see if it is delivered.
911 			 * If this expires without data, we may do SRR.
912 			 */
913 			fc_fcp_timer_set(fsp, 2);
914 			return;
915 		}
916 		fsp->status_code = FC_DATA_OVRRUN;
917 		FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
918 			   "len %x, data len %x\n",
919 			   fsp->rport->port_id,
920 			   fsp->xfer_len, expected_len, fsp->data_len);
921 	}
922 	fc_fcp_complete_locked(fsp);
923 	return;
924 
925 len_err:
926 	FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
927 		   "snsl %u\n", flags, fr_len(fp), respl, snsl);
928 err:
929 	fsp->status_code = FC_ERROR;
930 	fc_fcp_complete_locked(fsp);
931 }
932 
933 /**
934  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
935  *			      fcp_pkt lock held
936  * @fsp: The FCP packet to be completed
937  *
938  * This function may sleep if a timer is pending. The packet lock must be
939  * held, and the host lock must not be held.
940  */
941 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
942 {
943 	struct fc_lport *lport = fsp->lp;
944 	struct fc_seq *seq;
945 	struct fc_exch *ep;
946 	u32 f_ctl;
947 
948 	if (fsp->state & FC_SRB_ABORT_PENDING)
949 		return;
950 
951 	if (fsp->state & FC_SRB_ABORTED) {
952 		if (!fsp->status_code)
953 			fsp->status_code = FC_CMD_ABORTED;
954 	} else {
955 		/*
956 		 * Test for transport underrun, independent of response
957 		 * underrun status.
958 		 */
959 		if (fsp->cdb_status == SAM_STAT_GOOD &&
960 		    fsp->xfer_len < fsp->data_len && !fsp->io_status &&
961 		    (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
962 		     fsp->xfer_len < fsp->data_len - fsp->scsi_resid))
963 			fsp->status_code = FC_DATA_UNDRUN;
964 	}
965 
966 	seq = fsp->seq_ptr;
967 	if (seq) {
968 		fsp->seq_ptr = NULL;
969 		if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
970 			struct fc_frame *conf_frame;
971 			struct fc_seq *csp;
972 
973 			csp = lport->tt.seq_start_next(seq);
974 			conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
975 			if (conf_frame) {
976 				f_ctl = FC_FC_SEQ_INIT;
977 				f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
978 				ep = fc_seq_exch(seq);
979 				fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
980 					       ep->did, ep->sid,
981 					       FC_TYPE_FCP, f_ctl, 0);
982 				lport->tt.seq_send(lport, csp, conf_frame);
983 			}
984 		}
985 		lport->tt.exch_done(seq);
986 	}
987 	/*
988 	 * Some resets driven by SCSI are not I/Os and do not have
989 	 * SCSI commands associated with the requests. We should not
990 	 * call I/O completion if we do not have a SCSI command.
991 	 */
992 	if (fsp->cmd)
993 		fc_io_compl(fsp);
994 }
995 
996 /**
997  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
998  * @fsp:   The FCP packet whose exchanges should be canceled
999  * @error: The reason for the cancellation
1000  */
1001 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
1002 {
1003 	struct fc_lport *lport = fsp->lp;
1004 
1005 	if (fsp->seq_ptr) {
1006 		lport->tt.exch_done(fsp->seq_ptr);
1007 		fsp->seq_ptr = NULL;
1008 	}
1009 	fsp->status_code = error;
1010 }
1011 
1012 /**
1013  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1014  * @lport: The local port whose exchanges should be canceled
1015  * @id:	   The target's ID
1016  * @lun:   The LUN
1017  * @error: The reason for cancellation
1018  *
1019  * If lun or id is -1, they are ignored.
1020  */
1021 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1022 				    unsigned int lun, int error)
1023 {
1024 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1025 	struct fc_fcp_pkt *fsp;
1026 	struct scsi_cmnd *sc_cmd;
1027 	unsigned long flags;
1028 
1029 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1030 restart:
1031 	list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1032 		sc_cmd = fsp->cmd;
1033 		if (id != -1 && scmd_id(sc_cmd) != id)
1034 			continue;
1035 
1036 		if (lun != -1 && sc_cmd->device->lun != lun)
1037 			continue;
1038 
1039 		fc_fcp_pkt_hold(fsp);
1040 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1041 
1042 		if (!fc_fcp_lock_pkt(fsp)) {
1043 			fc_fcp_cleanup_cmd(fsp, error);
1044 			fc_io_compl(fsp);
1045 			fc_fcp_unlock_pkt(fsp);
1046 		}
1047 
1048 		fc_fcp_pkt_release(fsp);
1049 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1050 		/*
1051 		 * while we dropped the lock multiple pkts could
1052 		 * have been released, so we have to start over.
1053 		 */
1054 		goto restart;
1055 	}
1056 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1057 }
1058 
1059 /**
1060  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1061  * @lport: The local port whose exchanges are to be aborted
1062  */
1063 static void fc_fcp_abort_io(struct fc_lport *lport)
1064 {
1065 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1066 }
1067 
1068 /**
1069  * fc_fcp_pkt_send() - Send a fcp_pkt
1070  * @lport: The local port to send the FCP packet on
1071  * @fsp:   The FCP packet to send
1072  *
1073  * Return:  Zero for success and -1 for failure
1074  * Locks:   Called without locks held
1075  */
1076 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1077 {
1078 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1079 	unsigned long flags;
1080 	int rc;
1081 
1082 	fsp->cmd->SCp.ptr = (char *)fsp;
1083 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1084 	fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1085 
1086 	int_to_scsilun(fsp->cmd->device->lun, &fsp->cdb_cmd.fc_lun);
1087 	memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1088 
1089 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1090 	list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1091 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1092 	rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1093 	if (unlikely(rc)) {
1094 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1095 		fsp->cmd->SCp.ptr = NULL;
1096 		list_del(&fsp->list);
1097 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1098 	}
1099 
1100 	return rc;
1101 }
1102 
1103 /**
1104  * get_fsp_rec_tov() - Helper function to get REC_TOV
1105  * @fsp: the FCP packet
1106  *
1107  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
1108  */
1109 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
1110 {
1111 	struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
1112 
1113 	return msecs_to_jiffies(rpriv->e_d_tov) + HZ;
1114 }
1115 
1116 /**
1117  * fc_fcp_cmd_send() - Send a FCP command
1118  * @lport: The local port to send the command on
1119  * @fsp:   The FCP packet the command is on
1120  * @resp:  The handler for the response
1121  */
1122 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1123 			   void (*resp)(struct fc_seq *,
1124 					struct fc_frame *fp,
1125 					void *arg))
1126 {
1127 	struct fc_frame *fp;
1128 	struct fc_seq *seq;
1129 	struct fc_rport *rport;
1130 	struct fc_rport_libfc_priv *rpriv;
1131 	const size_t len = sizeof(fsp->cdb_cmd);
1132 	int rc = 0;
1133 
1134 	if (fc_fcp_lock_pkt(fsp))
1135 		return 0;
1136 
1137 	fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1138 	if (!fp) {
1139 		rc = -1;
1140 		goto unlock;
1141 	}
1142 
1143 	memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1144 	fr_fsp(fp) = fsp;
1145 	rport = fsp->rport;
1146 	fsp->max_payload = rport->maxframe_size;
1147 	rpriv = rport->dd_data;
1148 
1149 	fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1150 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1151 		       FC_FCTL_REQ, 0);
1152 
1153 	seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1154 				      fsp, 0);
1155 	if (!seq) {
1156 		rc = -1;
1157 		goto unlock;
1158 	}
1159 	fsp->seq_ptr = seq;
1160 	fc_fcp_pkt_hold(fsp);	/* hold for fc_fcp_pkt_destroy */
1161 
1162 	setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1163 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1164 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1165 
1166 unlock:
1167 	fc_fcp_unlock_pkt(fsp);
1168 	return rc;
1169 }
1170 
1171 /**
1172  * fc_fcp_error() - Handler for FCP layer errors
1173  * @fsp: The FCP packet the error is on
1174  * @fp:	 The frame that has errored
1175  */
1176 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1177 {
1178 	int error = PTR_ERR(fp);
1179 
1180 	if (fc_fcp_lock_pkt(fsp))
1181 		return;
1182 
1183 	if (error == -FC_EX_CLOSED) {
1184 		fc_fcp_retry_cmd(fsp);
1185 		goto unlock;
1186 	}
1187 
1188 	/*
1189 	 * clear abort pending, because the lower layer
1190 	 * decided to force completion.
1191 	 */
1192 	fsp->state &= ~FC_SRB_ABORT_PENDING;
1193 	fsp->status_code = FC_CMD_PLOGO;
1194 	fc_fcp_complete_locked(fsp);
1195 unlock:
1196 	fc_fcp_unlock_pkt(fsp);
1197 }
1198 
1199 /**
1200  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1201  * @fsp:   The FCP packet to abort on
1202  *
1203  * Called to send an abort and then wait for abort completion
1204  */
1205 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1206 {
1207 	int rc = FAILED;
1208 	unsigned long ticks_left;
1209 
1210 	if (fc_fcp_send_abort(fsp))
1211 		return FAILED;
1212 
1213 	init_completion(&fsp->tm_done);
1214 	fsp->wait_for_comp = 1;
1215 
1216 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1217 	ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1218 							FC_SCSI_TM_TOV);
1219 	spin_lock_bh(&fsp->scsi_pkt_lock);
1220 	fsp->wait_for_comp = 0;
1221 
1222 	if (!ticks_left) {
1223 		FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1224 	} else if (fsp->state & FC_SRB_ABORTED) {
1225 		FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1226 		rc = SUCCESS;
1227 		fc_fcp_complete_locked(fsp);
1228 	}
1229 
1230 	return rc;
1231 }
1232 
1233 /**
1234  * fc_lun_reset_send() - Send LUN reset command
1235  * @data: The FCP packet that identifies the LUN to be reset
1236  */
1237 static void fc_lun_reset_send(unsigned long data)
1238 {
1239 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1240 	struct fc_lport *lport = fsp->lp;
1241 
1242 	if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1243 		if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1244 			return;
1245 		if (fc_fcp_lock_pkt(fsp))
1246 			return;
1247 		setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1248 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1249 		fc_fcp_unlock_pkt(fsp);
1250 	}
1251 }
1252 
1253 /**
1254  * fc_lun_reset() - Send a LUN RESET command to a device
1255  *		    and wait for the reply
1256  * @lport: The local port to sent the command on
1257  * @fsp:   The FCP packet that identifies the LUN to be reset
1258  * @id:	   The SCSI command ID
1259  * @lun:   The LUN ID to be reset
1260  */
1261 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1262 			unsigned int id, unsigned int lun)
1263 {
1264 	int rc;
1265 
1266 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1267 	fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1268 	int_to_scsilun(lun, &fsp->cdb_cmd.fc_lun);
1269 
1270 	fsp->wait_for_comp = 1;
1271 	init_completion(&fsp->tm_done);
1272 
1273 	fc_lun_reset_send((unsigned long)fsp);
1274 
1275 	/*
1276 	 * wait for completion of reset
1277 	 * after that make sure all commands are terminated
1278 	 */
1279 	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1280 
1281 	spin_lock_bh(&fsp->scsi_pkt_lock);
1282 	fsp->state |= FC_SRB_COMPL;
1283 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1284 
1285 	del_timer_sync(&fsp->timer);
1286 
1287 	spin_lock_bh(&fsp->scsi_pkt_lock);
1288 	if (fsp->seq_ptr) {
1289 		lport->tt.exch_done(fsp->seq_ptr);
1290 		fsp->seq_ptr = NULL;
1291 	}
1292 	fsp->wait_for_comp = 0;
1293 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1294 
1295 	if (!rc) {
1296 		FC_SCSI_DBG(lport, "lun reset failed\n");
1297 		return FAILED;
1298 	}
1299 
1300 	/* cdb_status holds the tmf's rsp code */
1301 	if (fsp->cdb_status != FCP_TMF_CMPL)
1302 		return FAILED;
1303 
1304 	FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1305 	fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1306 	return SUCCESS;
1307 }
1308 
1309 /**
1310  * fc_tm_done() - Task Management response handler
1311  * @seq: The sequence that the response is on
1312  * @fp:	 The response frame
1313  * @arg: The FCP packet the response is for
1314  */
1315 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1316 {
1317 	struct fc_fcp_pkt *fsp = arg;
1318 	struct fc_frame_header *fh;
1319 
1320 	if (IS_ERR(fp)) {
1321 		/*
1322 		 * If there is an error just let it timeout or wait
1323 		 * for TMF to be aborted if it timedout.
1324 		 *
1325 		 * scsi-eh will escalate for when either happens.
1326 		 */
1327 		return;
1328 	}
1329 
1330 	if (fc_fcp_lock_pkt(fsp))
1331 		goto out;
1332 
1333 	/*
1334 	 * raced with eh timeout handler.
1335 	 */
1336 	if (!fsp->seq_ptr || !fsp->wait_for_comp)
1337 		goto out_unlock;
1338 
1339 	fh = fc_frame_header_get(fp);
1340 	if (fh->fh_type != FC_TYPE_BLS)
1341 		fc_fcp_resp(fsp, fp);
1342 	fsp->seq_ptr = NULL;
1343 	fsp->lp->tt.exch_done(seq);
1344 out_unlock:
1345 	fc_fcp_unlock_pkt(fsp);
1346 out:
1347 	fc_frame_free(fp);
1348 }
1349 
1350 /**
1351  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1352  * @lport: The local port to be cleaned up
1353  */
1354 static void fc_fcp_cleanup(struct fc_lport *lport)
1355 {
1356 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1357 }
1358 
1359 /**
1360  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1361  * @data: The FCP packet that has timed out
1362  *
1363  * If REC is supported then just issue it and return. The REC exchange will
1364  * complete or time out and recovery can continue at that point. Otherwise,
1365  * if the response has been received without all the data it has been
1366  * ER_TIMEOUT since the response was received. If the response has not been
1367  * received we see if data was received recently. If it has been then we
1368  * continue waiting, otherwise, we abort the command.
1369  */
1370 static void fc_fcp_timeout(unsigned long data)
1371 {
1372 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1373 	struct fc_rport *rport = fsp->rport;
1374 	struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1375 
1376 	if (fc_fcp_lock_pkt(fsp))
1377 		return;
1378 
1379 	if (fsp->cdb_cmd.fc_tm_flags)
1380 		goto unlock;
1381 
1382 	fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1383 
1384 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1385 		fc_fcp_rec(fsp);
1386 	else if (fsp->state & FC_SRB_RCV_STATUS)
1387 		fc_fcp_complete_locked(fsp);
1388 	else
1389 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1390 	fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1391 unlock:
1392 	fc_fcp_unlock_pkt(fsp);
1393 }
1394 
1395 /**
1396  * fc_fcp_rec() - Send a REC ELS request
1397  * @fsp: The FCP packet to send the REC request on
1398  */
1399 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1400 {
1401 	struct fc_lport *lport;
1402 	struct fc_frame *fp;
1403 	struct fc_rport *rport;
1404 	struct fc_rport_libfc_priv *rpriv;
1405 
1406 	lport = fsp->lp;
1407 	rport = fsp->rport;
1408 	rpriv = rport->dd_data;
1409 	if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1410 		fsp->status_code = FC_HRD_ERROR;
1411 		fsp->io_status = 0;
1412 		fc_fcp_complete_locked(fsp);
1413 		return;
1414 	}
1415 
1416 	fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1417 	if (!fp)
1418 		goto retry;
1419 
1420 	fr_seq(fp) = fsp->seq_ptr;
1421 	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1422 		       rpriv->local_port->port_id, FC_TYPE_ELS,
1423 		       FC_FCTL_REQ, 0);
1424 	if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1425 				 fc_fcp_rec_resp, fsp,
1426 				 2 * lport->r_a_tov)) {
1427 		fc_fcp_pkt_hold(fsp);		/* hold while REC outstanding */
1428 		return;
1429 	}
1430 retry:
1431 	if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1432 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1433 	else
1434 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1435 }
1436 
1437 /**
1438  * fc_fcp_rec_resp() - Handler for REC ELS responses
1439  * @seq: The sequence the response is on
1440  * @fp:	 The response frame
1441  * @arg: The FCP packet the response is on
1442  *
1443  * If the response is a reject then the scsi layer will handle
1444  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1445  * set the timeout and return. If the I/O was completed then complete the
1446  * exchange and tell the SCSI layer.
1447  */
1448 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1449 {
1450 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1451 	struct fc_els_rec_acc *recp;
1452 	struct fc_els_ls_rjt *rjt;
1453 	u32 e_stat;
1454 	u8 opcode;
1455 	u32 offset;
1456 	enum dma_data_direction data_dir;
1457 	enum fc_rctl r_ctl;
1458 	struct fc_rport_libfc_priv *rpriv;
1459 
1460 	if (IS_ERR(fp)) {
1461 		fc_fcp_rec_error(fsp, fp);
1462 		return;
1463 	}
1464 
1465 	if (fc_fcp_lock_pkt(fsp))
1466 		goto out;
1467 
1468 	fsp->recov_retry = 0;
1469 	opcode = fc_frame_payload_op(fp);
1470 	if (opcode == ELS_LS_RJT) {
1471 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1472 		switch (rjt->er_reason) {
1473 		default:
1474 			FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1475 				   "reason %d expl %d\n",
1476 				   fsp->rport->port_id, rjt->er_reason,
1477 				   rjt->er_explan);
1478 			/* fall through */
1479 		case ELS_RJT_UNSUP:
1480 			FC_FCP_DBG(fsp, "device does not support REC\n");
1481 			rpriv = fsp->rport->dd_data;
1482 			/*
1483 			 * if we do not spport RECs or got some bogus
1484 			 * reason then resetup timer so we check for
1485 			 * making progress.
1486 			 */
1487 			rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1488 			break;
1489 		case ELS_RJT_LOGIC:
1490 		case ELS_RJT_UNAB:
1491 			/*
1492 			 * If no data transfer, the command frame got dropped
1493 			 * so we just retry.  If data was transferred, we
1494 			 * lost the response but the target has no record,
1495 			 * so we abort and retry.
1496 			 */
1497 			if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1498 			    fsp->xfer_len == 0) {
1499 				fc_fcp_retry_cmd(fsp);
1500 				break;
1501 			}
1502 			fc_fcp_recovery(fsp, FC_ERROR);
1503 			break;
1504 		}
1505 	} else if (opcode == ELS_LS_ACC) {
1506 		if (fsp->state & FC_SRB_ABORTED)
1507 			goto unlock_out;
1508 
1509 		data_dir = fsp->cmd->sc_data_direction;
1510 		recp = fc_frame_payload_get(fp, sizeof(*recp));
1511 		offset = ntohl(recp->reca_fc4value);
1512 		e_stat = ntohl(recp->reca_e_stat);
1513 
1514 		if (e_stat & ESB_ST_COMPLETE) {
1515 
1516 			/*
1517 			 * The exchange is complete.
1518 			 *
1519 			 * For output, we must've lost the response.
1520 			 * For input, all data must've been sent.
1521 			 * We lost may have lost the response
1522 			 * (and a confirmation was requested) and maybe
1523 			 * some data.
1524 			 *
1525 			 * If all data received, send SRR
1526 			 * asking for response.	 If partial data received,
1527 			 * or gaps, SRR requests data at start of gap.
1528 			 * Recovery via SRR relies on in-order-delivery.
1529 			 */
1530 			if (data_dir == DMA_TO_DEVICE) {
1531 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1532 			} else if (fsp->xfer_contig_end == offset) {
1533 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1534 			} else {
1535 				offset = fsp->xfer_contig_end;
1536 				r_ctl = FC_RCTL_DD_SOL_DATA;
1537 			}
1538 			fc_fcp_srr(fsp, r_ctl, offset);
1539 		} else if (e_stat & ESB_ST_SEQ_INIT) {
1540 			/*
1541 			 * The remote port has the initiative, so just
1542 			 * keep waiting for it to complete.
1543 			 */
1544 			fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1545 		} else {
1546 
1547 			/*
1548 			 * The exchange is incomplete, we have seq. initiative.
1549 			 * Lost response with requested confirmation,
1550 			 * lost confirmation, lost transfer ready or
1551 			 * lost write data.
1552 			 *
1553 			 * For output, if not all data was received, ask
1554 			 * for transfer ready to be repeated.
1555 			 *
1556 			 * If we received or sent all the data, send SRR to
1557 			 * request response.
1558 			 *
1559 			 * If we lost a response, we may have lost some read
1560 			 * data as well.
1561 			 */
1562 			r_ctl = FC_RCTL_DD_SOL_DATA;
1563 			if (data_dir == DMA_TO_DEVICE) {
1564 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1565 				if (offset < fsp->data_len)
1566 					r_ctl = FC_RCTL_DD_DATA_DESC;
1567 			} else if (offset == fsp->xfer_contig_end) {
1568 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1569 			} else if (fsp->xfer_contig_end < offset) {
1570 				offset = fsp->xfer_contig_end;
1571 			}
1572 			fc_fcp_srr(fsp, r_ctl, offset);
1573 		}
1574 	}
1575 unlock_out:
1576 	fc_fcp_unlock_pkt(fsp);
1577 out:
1578 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1579 	fc_frame_free(fp);
1580 }
1581 
1582 /**
1583  * fc_fcp_rec_error() - Handler for REC errors
1584  * @fsp: The FCP packet the error is on
1585  * @fp:	 The REC frame
1586  */
1587 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1588 {
1589 	int error = PTR_ERR(fp);
1590 
1591 	if (fc_fcp_lock_pkt(fsp))
1592 		goto out;
1593 
1594 	switch (error) {
1595 	case -FC_EX_CLOSED:
1596 		fc_fcp_retry_cmd(fsp);
1597 		break;
1598 
1599 	default:
1600 		FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1601 			   fsp, fsp->rport->port_id, error);
1602 		fsp->status_code = FC_CMD_PLOGO;
1603 		/* fall through */
1604 
1605 	case -FC_EX_TIMEOUT:
1606 		/*
1607 		 * Assume REC or LS_ACC was lost.
1608 		 * The exchange manager will have aborted REC, so retry.
1609 		 */
1610 		FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1611 			   fsp->rport->port_id, error, fsp->recov_retry,
1612 			   FC_MAX_RECOV_RETRY);
1613 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1614 			fc_fcp_rec(fsp);
1615 		else
1616 			fc_fcp_recovery(fsp, FC_ERROR);
1617 		break;
1618 	}
1619 	fc_fcp_unlock_pkt(fsp);
1620 out:
1621 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1622 }
1623 
1624 /**
1625  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1626  * @fsp: The FCP pkt that needs to be aborted
1627  */
1628 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1629 {
1630 	fsp->status_code = code;
1631 	fsp->cdb_status = 0;
1632 	fsp->io_status = 0;
1633 	/*
1634 	 * if this fails then we let the scsi command timer fire and
1635 	 * scsi-ml escalate.
1636 	 */
1637 	fc_fcp_send_abort(fsp);
1638 }
1639 
1640 /**
1641  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1642  * @fsp:   The FCP packet the SRR is to be sent on
1643  * @r_ctl: The R_CTL field for the SRR request
1644  * This is called after receiving status but insufficient data, or
1645  * when expecting status but the request has timed out.
1646  */
1647 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1648 {
1649 	struct fc_lport *lport = fsp->lp;
1650 	struct fc_rport *rport;
1651 	struct fc_rport_libfc_priv *rpriv;
1652 	struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1653 	struct fc_seq *seq;
1654 	struct fcp_srr *srr;
1655 	struct fc_frame *fp;
1656 	unsigned int rec_tov;
1657 
1658 	rport = fsp->rport;
1659 	rpriv = rport->dd_data;
1660 
1661 	if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1662 	    rpriv->rp_state != RPORT_ST_READY)
1663 		goto retry;			/* shouldn't happen */
1664 	fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1665 	if (!fp)
1666 		goto retry;
1667 
1668 	srr = fc_frame_payload_get(fp, sizeof(*srr));
1669 	memset(srr, 0, sizeof(*srr));
1670 	srr->srr_op = ELS_SRR;
1671 	srr->srr_ox_id = htons(ep->oxid);
1672 	srr->srr_rx_id = htons(ep->rxid);
1673 	srr->srr_r_ctl = r_ctl;
1674 	srr->srr_rel_off = htonl(offset);
1675 
1676 	fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1677 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1678 		       FC_FCTL_REQ, 0);
1679 
1680 	rec_tov = get_fsp_rec_tov(fsp);
1681 	seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp,
1682 				      fc_fcp_pkt_destroy,
1683 				      fsp, jiffies_to_msecs(rec_tov));
1684 	if (!seq)
1685 		goto retry;
1686 
1687 	fsp->recov_seq = seq;
1688 	fsp->xfer_len = offset;
1689 	fsp->xfer_contig_end = offset;
1690 	fsp->state &= ~FC_SRB_RCV_STATUS;
1691 	fc_fcp_pkt_hold(fsp);		/* hold for outstanding SRR */
1692 	return;
1693 retry:
1694 	fc_fcp_retry_cmd(fsp);
1695 }
1696 
1697 /**
1698  * fc_fcp_srr_resp() - Handler for SRR response
1699  * @seq: The sequence the SRR is on
1700  * @fp:	 The SRR frame
1701  * @arg: The FCP packet the SRR is on
1702  */
1703 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1704 {
1705 	struct fc_fcp_pkt *fsp = arg;
1706 	struct fc_frame_header *fh;
1707 
1708 	if (IS_ERR(fp)) {
1709 		fc_fcp_srr_error(fsp, fp);
1710 		return;
1711 	}
1712 
1713 	if (fc_fcp_lock_pkt(fsp))
1714 		goto out;
1715 
1716 	fh = fc_frame_header_get(fp);
1717 	/*
1718 	 * BUG? fc_fcp_srr_error calls exch_done which would release
1719 	 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1720 	 * then fc_exch_timeout would be sending an abort. The exch_done
1721 	 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1722 	 * an abort response though.
1723 	 */
1724 	if (fh->fh_type == FC_TYPE_BLS) {
1725 		fc_fcp_unlock_pkt(fsp);
1726 		return;
1727 	}
1728 
1729 	switch (fc_frame_payload_op(fp)) {
1730 	case ELS_LS_ACC:
1731 		fsp->recov_retry = 0;
1732 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1733 		break;
1734 	case ELS_LS_RJT:
1735 	default:
1736 		fc_fcp_recovery(fsp, FC_ERROR);
1737 		break;
1738 	}
1739 	fc_fcp_unlock_pkt(fsp);
1740 out:
1741 	fsp->lp->tt.exch_done(seq);
1742 	fc_frame_free(fp);
1743 }
1744 
1745 /**
1746  * fc_fcp_srr_error() - Handler for SRR errors
1747  * @fsp: The FCP packet that the SRR error is on
1748  * @fp:	 The SRR frame
1749  */
1750 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1751 {
1752 	if (fc_fcp_lock_pkt(fsp))
1753 		goto out;
1754 	switch (PTR_ERR(fp)) {
1755 	case -FC_EX_TIMEOUT:
1756 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1757 			fc_fcp_rec(fsp);
1758 		else
1759 			fc_fcp_recovery(fsp, FC_TIMED_OUT);
1760 		break;
1761 	case -FC_EX_CLOSED:			/* e.g., link failure */
1762 		/* fall through */
1763 	default:
1764 		fc_fcp_retry_cmd(fsp);
1765 		break;
1766 	}
1767 	fc_fcp_unlock_pkt(fsp);
1768 out:
1769 	fsp->lp->tt.exch_done(fsp->recov_seq);
1770 }
1771 
1772 /**
1773  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1774  * @lport: The local port to be checked
1775  */
1776 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1777 {
1778 	/* lock ? */
1779 	return (lport->state == LPORT_ST_READY) &&
1780 		lport->link_up && !lport->qfull;
1781 }
1782 
1783 /**
1784  * fc_queuecommand() - The queuecommand function of the SCSI template
1785  * @shost: The Scsi_Host that the command was issued to
1786  * @cmd:   The scsi_cmnd to be executed
1787  *
1788  * This is the i/o strategy routine, called by the SCSI layer.
1789  */
1790 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1791 {
1792 	struct fc_lport *lport = shost_priv(shost);
1793 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1794 	struct fc_fcp_pkt *fsp;
1795 	struct fc_rport_libfc_priv *rpriv;
1796 	int rval;
1797 	int rc = 0;
1798 	struct fc_stats *stats;
1799 
1800 	rval = fc_remote_port_chkready(rport);
1801 	if (rval) {
1802 		sc_cmd->result = rval;
1803 		sc_cmd->scsi_done(sc_cmd);
1804 		return 0;
1805 	}
1806 
1807 	if (!*(struct fc_remote_port **)rport->dd_data) {
1808 		/*
1809 		 * rport is transitioning from blocked/deleted to
1810 		 * online
1811 		 */
1812 		sc_cmd->result = DID_IMM_RETRY << 16;
1813 		sc_cmd->scsi_done(sc_cmd);
1814 		goto out;
1815 	}
1816 
1817 	rpriv = rport->dd_data;
1818 
1819 	if (!fc_fcp_lport_queue_ready(lport)) {
1820 		if (lport->qfull)
1821 			fc_fcp_can_queue_ramp_down(lport);
1822 		rc = SCSI_MLQUEUE_HOST_BUSY;
1823 		goto out;
1824 	}
1825 
1826 	fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1827 	if (fsp == NULL) {
1828 		rc = SCSI_MLQUEUE_HOST_BUSY;
1829 		goto out;
1830 	}
1831 
1832 	/*
1833 	 * build the libfc request pkt
1834 	 */
1835 	fsp->cmd = sc_cmd;	/* save the cmd */
1836 	fsp->rport = rport;	/* set the remote port ptr */
1837 
1838 	/*
1839 	 * set up the transfer length
1840 	 */
1841 	fsp->data_len = scsi_bufflen(sc_cmd);
1842 	fsp->xfer_len = 0;
1843 
1844 	/*
1845 	 * setup the data direction
1846 	 */
1847 	stats = per_cpu_ptr(lport->stats, get_cpu());
1848 	if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1849 		fsp->req_flags = FC_SRB_READ;
1850 		stats->InputRequests++;
1851 		stats->InputBytes += fsp->data_len;
1852 	} else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1853 		fsp->req_flags = FC_SRB_WRITE;
1854 		stats->OutputRequests++;
1855 		stats->OutputBytes += fsp->data_len;
1856 	} else {
1857 		fsp->req_flags = 0;
1858 		stats->ControlRequests++;
1859 	}
1860 	put_cpu();
1861 
1862 	/*
1863 	 * send it to the lower layer
1864 	 * if we get -1 return then put the request in the pending
1865 	 * queue.
1866 	 */
1867 	rval = fc_fcp_pkt_send(lport, fsp);
1868 	if (rval != 0) {
1869 		fsp->state = FC_SRB_FREE;
1870 		fc_fcp_pkt_release(fsp);
1871 		rc = SCSI_MLQUEUE_HOST_BUSY;
1872 	}
1873 out:
1874 	return rc;
1875 }
1876 EXPORT_SYMBOL(fc_queuecommand);
1877 
1878 /**
1879  * fc_io_compl() - Handle responses for completed commands
1880  * @fsp: The FCP packet that is complete
1881  *
1882  * Translates fcp_pkt errors to a Linux SCSI errors.
1883  * The fcp packet lock must be held when calling.
1884  */
1885 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1886 {
1887 	struct fc_fcp_internal *si;
1888 	struct scsi_cmnd *sc_cmd;
1889 	struct fc_lport *lport;
1890 	unsigned long flags;
1891 
1892 	/* release outstanding ddp context */
1893 	fc_fcp_ddp_done(fsp);
1894 
1895 	fsp->state |= FC_SRB_COMPL;
1896 	if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1897 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1898 		del_timer_sync(&fsp->timer);
1899 		spin_lock_bh(&fsp->scsi_pkt_lock);
1900 	}
1901 
1902 	lport = fsp->lp;
1903 	si = fc_get_scsi_internal(lport);
1904 
1905 	/*
1906 	 * if can_queue ramp down is done then try can_queue ramp up
1907 	 * since commands are completing now.
1908 	 */
1909 	if (si->last_can_queue_ramp_down_time)
1910 		fc_fcp_can_queue_ramp_up(lport);
1911 
1912 	sc_cmd = fsp->cmd;
1913 	CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1914 	switch (fsp->status_code) {
1915 	case FC_COMPLETE:
1916 		if (fsp->cdb_status == 0) {
1917 			/*
1918 			 * good I/O status
1919 			 */
1920 			sc_cmd->result = DID_OK << 16;
1921 			if (fsp->scsi_resid)
1922 				CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1923 		} else {
1924 			/*
1925 			 * transport level I/O was ok but scsi
1926 			 * has non zero status
1927 			 */
1928 			sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1929 		}
1930 		break;
1931 	case FC_ERROR:
1932 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1933 			   "due to FC_ERROR\n");
1934 		sc_cmd->result = DID_ERROR << 16;
1935 		break;
1936 	case FC_DATA_UNDRUN:
1937 		if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1938 			/*
1939 			 * scsi status is good but transport level
1940 			 * underrun.
1941 			 */
1942 			if (fsp->state & FC_SRB_RCV_STATUS) {
1943 				sc_cmd->result = DID_OK << 16;
1944 			} else {
1945 				FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1946 					   " due to FC_DATA_UNDRUN (trans)\n");
1947 				sc_cmd->result = DID_ERROR << 16;
1948 			}
1949 		} else {
1950 			/*
1951 			 * scsi got underrun, this is an error
1952 			 */
1953 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1954 				   "due to FC_DATA_UNDRUN (scsi)\n");
1955 			CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1956 			sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1957 		}
1958 		break;
1959 	case FC_DATA_OVRRUN:
1960 		/*
1961 		 * overrun is an error
1962 		 */
1963 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1964 			   "due to FC_DATA_OVRRUN\n");
1965 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1966 		break;
1967 	case FC_CMD_ABORTED:
1968 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1969 			  "due to FC_CMD_ABORTED\n");
1970 		sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1971 		break;
1972 	case FC_CMD_RESET:
1973 		FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
1974 			   "due to FC_CMD_RESET\n");
1975 		sc_cmd->result = (DID_RESET << 16);
1976 		break;
1977 	case FC_HRD_ERROR:
1978 		FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
1979 			   "due to FC_HRD_ERROR\n");
1980 		sc_cmd->result = (DID_NO_CONNECT << 16);
1981 		break;
1982 	case FC_CRC_ERROR:
1983 		FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
1984 			   "due to FC_CRC_ERROR\n");
1985 		sc_cmd->result = (DID_PARITY << 16);
1986 		break;
1987 	case FC_TIMED_OUT:
1988 		FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
1989 			   "due to FC_TIMED_OUT\n");
1990 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1991 		break;
1992 	default:
1993 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1994 			   "due to unknown error\n");
1995 		sc_cmd->result = (DID_ERROR << 16);
1996 		break;
1997 	}
1998 
1999 	if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2000 		sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2001 
2002 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2003 	list_del(&fsp->list);
2004 	sc_cmd->SCp.ptr = NULL;
2005 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2006 	sc_cmd->scsi_done(sc_cmd);
2007 
2008 	/* release ref from initial allocation in queue command */
2009 	fc_fcp_pkt_release(fsp);
2010 }
2011 
2012 /**
2013  * fc_eh_abort() - Abort a command
2014  * @sc_cmd: The SCSI command to abort
2015  *
2016  * From SCSI host template.
2017  * Send an ABTS to the target device and wait for the response.
2018  */
2019 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2020 {
2021 	struct fc_fcp_pkt *fsp;
2022 	struct fc_lport *lport;
2023 	struct fc_fcp_internal *si;
2024 	int rc = FAILED;
2025 	unsigned long flags;
2026 	int rval;
2027 
2028 	rval = fc_block_scsi_eh(sc_cmd);
2029 	if (rval)
2030 		return rval;
2031 
2032 	lport = shost_priv(sc_cmd->device->host);
2033 	if (lport->state != LPORT_ST_READY)
2034 		return rc;
2035 	else if (!lport->link_up)
2036 		return rc;
2037 
2038 	si = fc_get_scsi_internal(lport);
2039 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2040 	fsp = CMD_SP(sc_cmd);
2041 	if (!fsp) {
2042 		/* command completed while scsi eh was setting up */
2043 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2044 		return SUCCESS;
2045 	}
2046 	/* grab a ref so the fsp and sc_cmd cannot be released from under us */
2047 	fc_fcp_pkt_hold(fsp);
2048 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2049 
2050 	if (fc_fcp_lock_pkt(fsp)) {
2051 		/* completed while we were waiting for timer to be deleted */
2052 		rc = SUCCESS;
2053 		goto release_pkt;
2054 	}
2055 
2056 	rc = fc_fcp_pkt_abort(fsp);
2057 	fc_fcp_unlock_pkt(fsp);
2058 
2059 release_pkt:
2060 	fc_fcp_pkt_release(fsp);
2061 	return rc;
2062 }
2063 EXPORT_SYMBOL(fc_eh_abort);
2064 
2065 /**
2066  * fc_eh_device_reset() - Reset a single LUN
2067  * @sc_cmd: The SCSI command which identifies the device whose
2068  *	    LUN is to be reset
2069  *
2070  * Set from SCSI host template.
2071  */
2072 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2073 {
2074 	struct fc_lport *lport;
2075 	struct fc_fcp_pkt *fsp;
2076 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2077 	int rc = FAILED;
2078 	int rval;
2079 
2080 	rval = fc_block_scsi_eh(sc_cmd);
2081 	if (rval)
2082 		return rval;
2083 
2084 	lport = shost_priv(sc_cmd->device->host);
2085 
2086 	if (lport->state != LPORT_ST_READY)
2087 		return rc;
2088 
2089 	FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2090 
2091 	fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2092 	if (fsp == NULL) {
2093 		printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2094 		goto out;
2095 	}
2096 
2097 	/*
2098 	 * Build the libfc request pkt. Do not set the scsi cmnd, because
2099 	 * the sc passed in is not setup for execution like when sent
2100 	 * through the queuecommand callout.
2101 	 */
2102 	fsp->rport = rport;	/* set the remote port ptr */
2103 
2104 	/*
2105 	 * flush outstanding commands
2106 	 */
2107 	rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2108 	fsp->state = FC_SRB_FREE;
2109 	fc_fcp_pkt_release(fsp);
2110 
2111 out:
2112 	return rc;
2113 }
2114 EXPORT_SYMBOL(fc_eh_device_reset);
2115 
2116 /**
2117  * fc_eh_host_reset() - Reset a Scsi_Host.
2118  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2119  */
2120 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2121 {
2122 	struct Scsi_Host *shost = sc_cmd->device->host;
2123 	struct fc_lport *lport = shost_priv(shost);
2124 	unsigned long wait_tmo;
2125 
2126 	FC_SCSI_DBG(lport, "Resetting host\n");
2127 
2128 	fc_block_scsi_eh(sc_cmd);
2129 
2130 	lport->tt.lport_reset(lport);
2131 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2132 	while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2133 							       wait_tmo))
2134 		msleep(1000);
2135 
2136 	if (fc_fcp_lport_queue_ready(lport)) {
2137 		shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2138 			     "on port (%6.6x)\n", lport->port_id);
2139 		return SUCCESS;
2140 	} else {
2141 		shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2142 			     "port (%6.6x) is not ready.\n",
2143 			     lport->port_id);
2144 		return FAILED;
2145 	}
2146 }
2147 EXPORT_SYMBOL(fc_eh_host_reset);
2148 
2149 /**
2150  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2151  * @sdev: The SCSI device that identifies the SCSI host
2152  *
2153  * Configures queue depth based on host's cmd_per_len. If not set
2154  * then we use the libfc default.
2155  */
2156 int fc_slave_alloc(struct scsi_device *sdev)
2157 {
2158 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2159 
2160 	if (!rport || fc_remote_port_chkready(rport))
2161 		return -ENXIO;
2162 
2163 	scsi_adjust_queue_depth(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2164 	return 0;
2165 }
2166 EXPORT_SYMBOL(fc_slave_alloc);
2167 
2168 /**
2169  * fc_change_queue_depth() - Change a device's queue depth
2170  * @sdev:   The SCSI device whose queue depth is to change
2171  * @qdepth: The new queue depth
2172  * @reason: The resason for the change
2173  */
2174 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2175 {
2176 	scsi_adjust_queue_depth(sdev, qdepth);
2177 	return sdev->queue_depth;
2178 }
2179 EXPORT_SYMBOL(fc_change_queue_depth);
2180 
2181 /**
2182  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2183  * @lport: The local port that no longer needs the FCP layer
2184  */
2185 void fc_fcp_destroy(struct fc_lport *lport)
2186 {
2187 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2188 
2189 	if (!list_empty(&si->scsi_pkt_queue))
2190 		printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2191 		       "port (%6.6x)\n", lport->port_id);
2192 
2193 	mempool_destroy(si->scsi_pkt_pool);
2194 	kfree(si);
2195 	lport->scsi_priv = NULL;
2196 }
2197 EXPORT_SYMBOL(fc_fcp_destroy);
2198 
2199 int fc_setup_fcp(void)
2200 {
2201 	int rc = 0;
2202 
2203 	scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2204 					    sizeof(struct fc_fcp_pkt),
2205 					    0, SLAB_HWCACHE_ALIGN, NULL);
2206 	if (!scsi_pkt_cachep) {
2207 		printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2208 		       "module load failed!");
2209 		rc = -ENOMEM;
2210 	}
2211 
2212 	return rc;
2213 }
2214 
2215 void fc_destroy_fcp(void)
2216 {
2217 	if (scsi_pkt_cachep)
2218 		kmem_cache_destroy(scsi_pkt_cachep);
2219 }
2220 
2221 /**
2222  * fc_fcp_init() - Initialize the FCP layer for a local port
2223  * @lport: The local port to initialize the exchange layer for
2224  */
2225 int fc_fcp_init(struct fc_lport *lport)
2226 {
2227 	int rc;
2228 	struct fc_fcp_internal *si;
2229 
2230 	if (!lport->tt.fcp_cmd_send)
2231 		lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2232 
2233 	if (!lport->tt.fcp_cleanup)
2234 		lport->tt.fcp_cleanup = fc_fcp_cleanup;
2235 
2236 	if (!lport->tt.fcp_abort_io)
2237 		lport->tt.fcp_abort_io = fc_fcp_abort_io;
2238 
2239 	si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2240 	if (!si)
2241 		return -ENOMEM;
2242 	lport->scsi_priv = si;
2243 	si->max_can_queue = lport->host->can_queue;
2244 	INIT_LIST_HEAD(&si->scsi_pkt_queue);
2245 	spin_lock_init(&si->scsi_queue_lock);
2246 
2247 	si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2248 	if (!si->scsi_pkt_pool) {
2249 		rc = -ENOMEM;
2250 		goto free_internal;
2251 	}
2252 	return 0;
2253 
2254 free_internal:
2255 	kfree(si);
2256 	return rc;
2257 }
2258 EXPORT_SYMBOL(fc_fcp_init);
2259