xref: /openbmc/linux/drivers/scsi/libfc/fc_fcp.c (revision 9fb29c73)
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21 
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31 
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37 
38 #include <scsi/fc/fc_fc2.h>
39 
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42 
43 #include "fc_libfc.h"
44 
45 static struct kmem_cache *scsi_pkt_cachep;
46 
47 /* SRB state definitions */
48 #define FC_SRB_FREE		0		/* cmd is free */
49 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
50 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
51 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
52 #define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
53 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
54 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
56 
57 #define FC_SRB_READ		(1 << 1)
58 #define FC_SRB_WRITE		(1 << 0)
59 
60 /*
61  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
62  */
63 #define CMD_SP(Cmnd)		    ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
64 #define CMD_ENTRY_STATUS(Cmnd)	    ((Cmnd)->SCp.have_data_in)
65 #define CMD_COMPL_STATUS(Cmnd)	    ((Cmnd)->SCp.this_residual)
66 #define CMD_SCSI_STATUS(Cmnd)	    ((Cmnd)->SCp.Status)
67 #define CMD_RESID_LEN(Cmnd)	    ((Cmnd)->SCp.buffers_residual)
68 
69 /**
70  * struct fc_fcp_internal - FCP layer internal data
71  * @scsi_pkt_pool: Memory pool to draw FCP packets from
72  * @scsi_queue_lock: Protects the scsi_pkt_queue
73  * @scsi_pkt_queue: Current FCP packets
74  * @last_can_queue_ramp_down_time: ramp down time
75  * @last_can_queue_ramp_up_time: ramp up time
76  * @max_can_queue: max can_queue size
77  */
78 struct fc_fcp_internal {
79 	mempool_t		*scsi_pkt_pool;
80 	spinlock_t		scsi_queue_lock;
81 	struct list_head	scsi_pkt_queue;
82 	unsigned long		last_can_queue_ramp_down_time;
83 	unsigned long		last_can_queue_ramp_up_time;
84 	int			max_can_queue;
85 };
86 
87 #define fc_get_scsi_internal(x)	((struct fc_fcp_internal *)(x)->scsi_priv)
88 
89 /*
90  * function prototypes
91  * FC scsi I/O related functions
92  */
93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
100 static void fc_fcp_timeout(struct timer_list *);
101 static void fc_fcp_rec(struct fc_fcp_pkt *);
102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
104 static void fc_io_compl(struct fc_fcp_pkt *);
105 
106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
109 
110 /*
111  * command status codes
112  */
113 #define FC_COMPLETE		0
114 #define FC_CMD_ABORTED		1
115 #define FC_CMD_RESET		2
116 #define FC_CMD_PLOGO		3
117 #define FC_SNS_RCV		4
118 #define FC_TRANS_ERR		5
119 #define FC_DATA_OVRRUN		6
120 #define FC_DATA_UNDRUN		7
121 #define FC_ERROR		8
122 #define FC_HRD_ERROR		9
123 #define FC_CRC_ERROR		10
124 #define FC_TIMED_OUT		11
125 #define FC_TRANS_RESET		12
126 
127 /*
128  * Error recovery timeout values.
129  */
130 #define FC_SCSI_TM_TOV		(10 * HZ)
131 #define FC_HOST_RESET_TIMEOUT	(30 * HZ)
132 #define FC_CAN_QUEUE_PERIOD	(60 * HZ)
133 
134 #define FC_MAX_ERROR_CNT	5
135 #define FC_MAX_RECOV_RETRY	3
136 
137 #define FC_FCP_DFLT_QUEUE_DEPTH 32
138 
139 /**
140  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
141  * @lport: The local port that the FCP packet is for
142  * @gfp:   GFP flags for allocation
143  *
144  * Return value: fcp_pkt structure or null on allocation failure.
145  * Context:	 Can be called from process context, no lock is required.
146  */
147 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
148 {
149 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
150 	struct fc_fcp_pkt *fsp;
151 
152 	fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
153 	if (fsp) {
154 		memset(fsp, 0, sizeof(*fsp));
155 		fsp->lp = lport;
156 		fsp->xfer_ddp = FC_XID_UNKNOWN;
157 		refcount_set(&fsp->ref_cnt, 1);
158 		timer_setup(&fsp->timer, NULL, 0);
159 		INIT_LIST_HEAD(&fsp->list);
160 		spin_lock_init(&fsp->scsi_pkt_lock);
161 	} else {
162 		per_cpu_ptr(lport->stats, get_cpu())->FcpPktAllocFails++;
163 		put_cpu();
164 	}
165 	return fsp;
166 }
167 
168 /**
169  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
170  * @fsp: The FCP packet to be released
171  *
172  * Context: Can be called from process or interrupt context,
173  *	    no lock is required.
174  */
175 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
176 {
177 	if (refcount_dec_and_test(&fsp->ref_cnt)) {
178 		struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
179 
180 		mempool_free(fsp, si->scsi_pkt_pool);
181 	}
182 }
183 
184 /**
185  * fc_fcp_pkt_hold() - Hold a fcp_pkt
186  * @fsp: The FCP packet to be held
187  */
188 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
189 {
190 	refcount_inc(&fsp->ref_cnt);
191 }
192 
193 /**
194  * fc_fcp_pkt_destroy() - Release hold on a fcp_pkt
195  * @seq: The sequence that the FCP packet is on (required by destructor API)
196  * @fsp: The FCP packet to be released
197  *
198  * This routine is called by a destructor callback in the fc_exch_seq_send()
199  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
200  * argument even though it is not used by this routine.
201  *
202  * Context: No locking required.
203  */
204 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
205 {
206 	fc_fcp_pkt_release(fsp);
207 }
208 
209 /**
210  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
211  * @fsp: The FCP packet to be locked and incremented
212  *
213  * We should only return error if we return a command to SCSI-ml before
214  * getting a response. This can happen in cases where we send a abort, but
215  * do not wait for the response and the abort and command can be passing
216  * each other on the wire/network-layer.
217  *
218  * Note: this function locks the packet and gets a reference to allow
219  * callers to call the completion function while the lock is held and
220  * not have to worry about the packets refcount.
221  *
222  * TODO: Maybe we should just have callers grab/release the lock and
223  * have a function that they call to verify the fsp and grab a ref if
224  * needed.
225  */
226 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
227 {
228 	spin_lock_bh(&fsp->scsi_pkt_lock);
229 	if (fsp->state & FC_SRB_COMPL) {
230 		spin_unlock_bh(&fsp->scsi_pkt_lock);
231 		return -EPERM;
232 	}
233 
234 	fc_fcp_pkt_hold(fsp);
235 	return 0;
236 }
237 
238 /**
239  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
240  *			 reference count
241  * @fsp: The FCP packet to be unlocked and decremented
242  */
243 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
244 {
245 	spin_unlock_bh(&fsp->scsi_pkt_lock);
246 	fc_fcp_pkt_release(fsp);
247 }
248 
249 /**
250  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
251  * @fsp:   The FCP packet to start a timer for
252  * @delay: The timeout period in jiffies
253  */
254 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
255 {
256 	if (!(fsp->state & FC_SRB_COMPL)) {
257 		mod_timer(&fsp->timer, jiffies + delay);
258 		fsp->timer_delay = delay;
259 	}
260 }
261 
262 static void fc_fcp_abort_done(struct fc_fcp_pkt *fsp)
263 {
264 	fsp->state |= FC_SRB_ABORTED;
265 	fsp->state &= ~FC_SRB_ABORT_PENDING;
266 
267 	if (fsp->wait_for_comp)
268 		complete(&fsp->tm_done);
269 	else
270 		fc_fcp_complete_locked(fsp);
271 }
272 
273 /**
274  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
275  *			 fcp_pkt
276  * @fsp: The FCP packet to abort exchanges on
277  */
278 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
279 {
280 	int rc;
281 
282 	if (!fsp->seq_ptr)
283 		return -EINVAL;
284 
285 	per_cpu_ptr(fsp->lp->stats, get_cpu())->FcpPktAborts++;
286 	put_cpu();
287 
288 	fsp->state |= FC_SRB_ABORT_PENDING;
289 	rc = fc_seq_exch_abort(fsp->seq_ptr, 0);
290 	/*
291 	 * fc_seq_exch_abort() might return -ENXIO if
292 	 * the sequence is already completed
293 	 */
294 	if (rc == -ENXIO) {
295 		fc_fcp_abort_done(fsp);
296 		rc = 0;
297 	}
298 	return rc;
299 }
300 
301 /**
302  * fc_fcp_retry_cmd() - Retry a fcp_pkt
303  * @fsp: The FCP packet to be retried
304  *
305  * Sets the status code to be FC_ERROR and then calls
306  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
307  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
308  * The SCSI-ml will retry the command.
309  */
310 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp, int status_code)
311 {
312 	if (fsp->seq_ptr) {
313 		fc_exch_done(fsp->seq_ptr);
314 		fsp->seq_ptr = NULL;
315 	}
316 
317 	fsp->state &= ~FC_SRB_ABORT_PENDING;
318 	fsp->io_status = 0;
319 	fsp->status_code = status_code;
320 	fc_fcp_complete_locked(fsp);
321 }
322 
323 /**
324  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
325  * @fsp: The FCP packet that will manage the DDP frames
326  * @xid: The XID that will be used for the DDP exchange
327  */
328 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
329 {
330 	struct fc_lport *lport;
331 
332 	lport = fsp->lp;
333 	if ((fsp->req_flags & FC_SRB_READ) &&
334 	    (lport->lro_enabled) && (lport->tt.ddp_setup)) {
335 		if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
336 					scsi_sg_count(fsp->cmd)))
337 			fsp->xfer_ddp = xid;
338 	}
339 }
340 
341 /**
342  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
343  *		       DDP related resources for a fcp_pkt
344  * @fsp: The FCP packet that DDP had been used on
345  */
346 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
347 {
348 	struct fc_lport *lport;
349 
350 	if (!fsp)
351 		return;
352 
353 	if (fsp->xfer_ddp == FC_XID_UNKNOWN)
354 		return;
355 
356 	lport = fsp->lp;
357 	if (lport->tt.ddp_done) {
358 		fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
359 		fsp->xfer_ddp = FC_XID_UNKNOWN;
360 	}
361 }
362 
363 /**
364  * fc_fcp_can_queue_ramp_up() - increases can_queue
365  * @lport: lport to ramp up can_queue
366  */
367 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
368 {
369 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
370 	unsigned long flags;
371 	int can_queue;
372 
373 	spin_lock_irqsave(lport->host->host_lock, flags);
374 
375 	if (si->last_can_queue_ramp_up_time &&
376 	    (time_before(jiffies, si->last_can_queue_ramp_up_time +
377 			 FC_CAN_QUEUE_PERIOD)))
378 		goto unlock;
379 
380 	if (time_before(jiffies, si->last_can_queue_ramp_down_time +
381 			FC_CAN_QUEUE_PERIOD))
382 		goto unlock;
383 
384 	si->last_can_queue_ramp_up_time = jiffies;
385 
386 	can_queue = lport->host->can_queue << 1;
387 	if (can_queue >= si->max_can_queue) {
388 		can_queue = si->max_can_queue;
389 		si->last_can_queue_ramp_down_time = 0;
390 	}
391 	lport->host->can_queue = can_queue;
392 	shost_printk(KERN_ERR, lport->host, "libfc: increased "
393 		     "can_queue to %d.\n", can_queue);
394 
395 unlock:
396 	spin_unlock_irqrestore(lport->host->host_lock, flags);
397 }
398 
399 /**
400  * fc_fcp_can_queue_ramp_down() - reduces can_queue
401  * @lport: lport to reduce can_queue
402  *
403  * If we are getting memory allocation failures, then we may
404  * be trying to execute too many commands. We let the running
405  * commands complete or timeout, then try again with a reduced
406  * can_queue. Eventually we will hit the point where we run
407  * on all reserved structs.
408  */
409 static bool fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
410 {
411 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
412 	unsigned long flags;
413 	int can_queue;
414 	bool changed = false;
415 
416 	spin_lock_irqsave(lport->host->host_lock, flags);
417 
418 	if (si->last_can_queue_ramp_down_time &&
419 	    (time_before(jiffies, si->last_can_queue_ramp_down_time +
420 			 FC_CAN_QUEUE_PERIOD)))
421 		goto unlock;
422 
423 	si->last_can_queue_ramp_down_time = jiffies;
424 
425 	can_queue = lport->host->can_queue;
426 	can_queue >>= 1;
427 	if (!can_queue)
428 		can_queue = 1;
429 	lport->host->can_queue = can_queue;
430 	changed = true;
431 
432 unlock:
433 	spin_unlock_irqrestore(lport->host->host_lock, flags);
434 	return changed;
435 }
436 
437 /*
438  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
439  * @lport:	fc lport struct
440  * @len:	payload length
441  *
442  * Allocates fc_frame structure and buffer but if fails to allocate
443  * then reduce can_queue.
444  */
445 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
446 						  size_t len)
447 {
448 	struct fc_frame *fp;
449 
450 	fp = fc_frame_alloc(lport, len);
451 	if (likely(fp))
452 		return fp;
453 
454 	per_cpu_ptr(lport->stats, get_cpu())->FcpFrameAllocFails++;
455 	put_cpu();
456 	/* error case */
457 	fc_fcp_can_queue_ramp_down(lport);
458 	shost_printk(KERN_ERR, lport->host,
459 		     "libfc: Could not allocate frame, "
460 		     "reducing can_queue to %d.\n", lport->host->can_queue);
461 	return NULL;
462 }
463 
464 /**
465  * get_fsp_rec_tov() - Helper function to get REC_TOV
466  * @fsp: the FCP packet
467  *
468  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
469  */
470 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
471 {
472 	struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
473 	unsigned int e_d_tov = FC_DEF_E_D_TOV;
474 
475 	if (rpriv && rpriv->e_d_tov > e_d_tov)
476 		e_d_tov = rpriv->e_d_tov;
477 	return msecs_to_jiffies(e_d_tov) + HZ;
478 }
479 
480 /**
481  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
482  * @fsp: The FCP packet the data is on
483  * @fp:	 The data frame
484  */
485 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
486 {
487 	struct scsi_cmnd *sc = fsp->cmd;
488 	struct fc_lport *lport = fsp->lp;
489 	struct fc_stats *stats;
490 	struct fc_frame_header *fh;
491 	size_t start_offset;
492 	size_t offset;
493 	u32 crc;
494 	u32 copy_len = 0;
495 	size_t len;
496 	void *buf;
497 	struct scatterlist *sg;
498 	u32 nents;
499 	u8 host_bcode = FC_COMPLETE;
500 
501 	fh = fc_frame_header_get(fp);
502 	offset = ntohl(fh->fh_parm_offset);
503 	start_offset = offset;
504 	len = fr_len(fp) - sizeof(*fh);
505 	buf = fc_frame_payload_get(fp, 0);
506 
507 	/*
508 	 * if this I/O is ddped then clear it and initiate recovery since data
509 	 * frames are expected to be placed directly in that case.
510 	 *
511 	 * Indicate error to scsi-ml because something went wrong with the
512 	 * ddp handling to get us here.
513 	 */
514 	if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
515 		fc_fcp_ddp_done(fsp);
516 		FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
517 		host_bcode = FC_ERROR;
518 		goto err;
519 	}
520 	if (offset + len > fsp->data_len) {
521 		/* this should never happen */
522 		if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
523 		    fc_frame_crc_check(fp))
524 			goto crc_err;
525 		FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
526 			   "data_len %x\n", len, offset, fsp->data_len);
527 
528 		/* Data is corrupted indicate scsi-ml should retry */
529 		host_bcode = FC_DATA_OVRRUN;
530 		goto err;
531 	}
532 	if (offset != fsp->xfer_len)
533 		fsp->state |= FC_SRB_DISCONTIG;
534 
535 	sg = scsi_sglist(sc);
536 	nents = scsi_sg_count(sc);
537 
538 	if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
539 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
540 						    &offset, NULL);
541 	} else {
542 		crc = crc32(~0, (u8 *) fh, sizeof(*fh));
543 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
544 						    &offset, &crc);
545 		buf = fc_frame_payload_get(fp, 0);
546 		if (len % 4)
547 			crc = crc32(crc, buf + len, 4 - (len % 4));
548 
549 		if (~crc != le32_to_cpu(fr_crc(fp))) {
550 crc_err:
551 			stats = per_cpu_ptr(lport->stats, get_cpu());
552 			stats->ErrorFrames++;
553 			/* per cpu count, not total count, but OK for limit */
554 			if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
555 				printk(KERN_WARNING "libfc: CRC error on data "
556 				       "frame for port (%6.6x)\n",
557 				       lport->port_id);
558 			put_cpu();
559 			/*
560 			 * Assume the frame is total garbage.
561 			 * We may have copied it over the good part
562 			 * of the buffer.
563 			 * If so, we need to retry the entire operation.
564 			 * Otherwise, ignore it.
565 			 */
566 			if (fsp->state & FC_SRB_DISCONTIG) {
567 				host_bcode = FC_CRC_ERROR;
568 				goto err;
569 			}
570 			return;
571 		}
572 	}
573 
574 	if (fsp->xfer_contig_end == start_offset)
575 		fsp->xfer_contig_end += copy_len;
576 	fsp->xfer_len += copy_len;
577 
578 	/*
579 	 * In the very rare event that this data arrived after the response
580 	 * and completes the transfer, call the completion handler.
581 	 */
582 	if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
583 	    fsp->xfer_len == fsp->data_len - fsp->scsi_resid) {
584 		FC_FCP_DBG( fsp, "complete out-of-order sequence\n" );
585 		fc_fcp_complete_locked(fsp);
586 	}
587 	return;
588 err:
589 	fc_fcp_recovery(fsp, host_bcode);
590 }
591 
592 /**
593  * fc_fcp_send_data() - Send SCSI data to a target
594  * @fsp:      The FCP packet the data is on
595  * @sp:	      The sequence the data is to be sent on
596  * @offset:   The starting offset for this data request
597  * @seq_blen: The burst length for this data request
598  *
599  * Called after receiving a Transfer Ready data descriptor.
600  * If the LLD is capable of sequence offload then send down the
601  * seq_blen amount of data in single frame, otherwise send
602  * multiple frames of the maximum frame payload supported by
603  * the target port.
604  */
605 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
606 			    size_t offset, size_t seq_blen)
607 {
608 	struct fc_exch *ep;
609 	struct scsi_cmnd *sc;
610 	struct scatterlist *sg;
611 	struct fc_frame *fp = NULL;
612 	struct fc_lport *lport = fsp->lp;
613 	struct page *page;
614 	size_t remaining;
615 	size_t t_blen;
616 	size_t tlen;
617 	size_t sg_bytes;
618 	size_t frame_offset, fh_parm_offset;
619 	size_t off;
620 	int error;
621 	void *data = NULL;
622 	void *page_addr;
623 	int using_sg = lport->sg_supp;
624 	u32 f_ctl;
625 
626 	WARN_ON(seq_blen <= 0);
627 	if (unlikely(offset + seq_blen > fsp->data_len)) {
628 		/* this should never happen */
629 		FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
630 			   "offset %zx\n", seq_blen, offset);
631 		fc_fcp_send_abort(fsp);
632 		return 0;
633 	} else if (offset != fsp->xfer_len) {
634 		/* Out of Order Data Request - no problem, but unexpected. */
635 		FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
636 			   "seq_blen %zx offset %zx\n", seq_blen, offset);
637 	}
638 
639 	/*
640 	 * if LLD is capable of seq_offload then set transport
641 	 * burst length (t_blen) to seq_blen, otherwise set t_blen
642 	 * to max FC frame payload previously set in fsp->max_payload.
643 	 */
644 	t_blen = fsp->max_payload;
645 	if (lport->seq_offload) {
646 		t_blen = min(seq_blen, (size_t)lport->lso_max);
647 		FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
648 			   fsp, seq_blen, lport->lso_max, t_blen);
649 	}
650 
651 	if (t_blen > 512)
652 		t_blen &= ~(512 - 1);	/* round down to block size */
653 	sc = fsp->cmd;
654 
655 	remaining = seq_blen;
656 	fh_parm_offset = frame_offset = offset;
657 	tlen = 0;
658 	seq = fc_seq_start_next(seq);
659 	f_ctl = FC_FC_REL_OFF;
660 	WARN_ON(!seq);
661 
662 	sg = scsi_sglist(sc);
663 
664 	while (remaining > 0 && sg) {
665 		if (offset >= sg->length) {
666 			offset -= sg->length;
667 			sg = sg_next(sg);
668 			continue;
669 		}
670 		if (!fp) {
671 			tlen = min(t_blen, remaining);
672 
673 			/*
674 			 * TODO.  Temporary workaround.	 fc_seq_send() can't
675 			 * handle odd lengths in non-linear skbs.
676 			 * This will be the final fragment only.
677 			 */
678 			if (tlen % 4)
679 				using_sg = 0;
680 			fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
681 			if (!fp)
682 				return -ENOMEM;
683 
684 			data = fc_frame_header_get(fp) + 1;
685 			fh_parm_offset = frame_offset;
686 			fr_max_payload(fp) = fsp->max_payload;
687 		}
688 
689 		off = offset + sg->offset;
690 		sg_bytes = min(tlen, sg->length - offset);
691 		sg_bytes = min(sg_bytes,
692 			       (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
693 		page = sg_page(sg) + (off >> PAGE_SHIFT);
694 		if (using_sg) {
695 			get_page(page);
696 			skb_fill_page_desc(fp_skb(fp),
697 					   skb_shinfo(fp_skb(fp))->nr_frags,
698 					   page, off & ~PAGE_MASK, sg_bytes);
699 			fp_skb(fp)->data_len += sg_bytes;
700 			fr_len(fp) += sg_bytes;
701 			fp_skb(fp)->truesize += PAGE_SIZE;
702 		} else {
703 			/*
704 			 * The scatterlist item may be bigger than PAGE_SIZE,
705 			 * but we must not cross pages inside the kmap.
706 			 */
707 			page_addr = kmap_atomic(page);
708 			memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
709 			       sg_bytes);
710 			kunmap_atomic(page_addr);
711 			data += sg_bytes;
712 		}
713 		offset += sg_bytes;
714 		frame_offset += sg_bytes;
715 		tlen -= sg_bytes;
716 		remaining -= sg_bytes;
717 
718 		if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
719 		    (tlen))
720 			continue;
721 
722 		/*
723 		 * Send sequence with transfer sequence initiative in case
724 		 * this is last FCP frame of the sequence.
725 		 */
726 		if (remaining == 0)
727 			f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
728 
729 		ep = fc_seq_exch(seq);
730 		fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
731 			       FC_TYPE_FCP, f_ctl, fh_parm_offset);
732 
733 		/*
734 		 * send fragment using for a sequence.
735 		 */
736 		error = fc_seq_send(lport, seq, fp);
737 		if (error) {
738 			WARN_ON(1);		/* send error should be rare */
739 			return error;
740 		}
741 		fp = NULL;
742 	}
743 	fsp->xfer_len += seq_blen;	/* premature count? */
744 	return 0;
745 }
746 
747 /**
748  * fc_fcp_abts_resp() - Receive an ABTS response
749  * @fsp: The FCP packet that is being aborted
750  * @fp:	 The response frame
751  */
752 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
753 {
754 	int ba_done = 1;
755 	struct fc_ba_rjt *brp;
756 	struct fc_frame_header *fh;
757 
758 	fh = fc_frame_header_get(fp);
759 	switch (fh->fh_r_ctl) {
760 	case FC_RCTL_BA_ACC:
761 		break;
762 	case FC_RCTL_BA_RJT:
763 		brp = fc_frame_payload_get(fp, sizeof(*brp));
764 		if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
765 			break;
766 		/* fall thru */
767 	default:
768 		/*
769 		 * we will let the command timeout
770 		 * and scsi-ml recover in this case,
771 		 * therefore cleared the ba_done flag.
772 		 */
773 		ba_done = 0;
774 	}
775 
776 	if (ba_done)
777 		fc_fcp_abort_done(fsp);
778 }
779 
780 /**
781  * fc_fcp_recv() - Receive an FCP frame
782  * @seq: The sequence the frame is on
783  * @fp:	 The received frame
784  * @arg: The related FCP packet
785  *
786  * Context: Called from Soft IRQ context. Can not be called
787  *	    holding the FCP packet list lock.
788  */
789 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
790 {
791 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
792 	struct fc_lport *lport = fsp->lp;
793 	struct fc_frame_header *fh;
794 	struct fcp_txrdy *dd;
795 	u8 r_ctl;
796 	int rc = 0;
797 
798 	if (IS_ERR(fp)) {
799 		fc_fcp_error(fsp, fp);
800 		return;
801 	}
802 
803 	fh = fc_frame_header_get(fp);
804 	r_ctl = fh->fh_r_ctl;
805 
806 	if (lport->state != LPORT_ST_READY) {
807 		FC_FCP_DBG(fsp, "lport state %d, ignoring r_ctl %x\n",
808 			   lport->state, r_ctl);
809 		goto out;
810 	}
811 	if (fc_fcp_lock_pkt(fsp))
812 		goto out;
813 
814 	if (fh->fh_type == FC_TYPE_BLS) {
815 		fc_fcp_abts_resp(fsp, fp);
816 		goto unlock;
817 	}
818 
819 	if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING)) {
820 		FC_FCP_DBG(fsp, "command aborted, ignoring r_ctl %x\n", r_ctl);
821 		goto unlock;
822 	}
823 
824 	if (r_ctl == FC_RCTL_DD_DATA_DESC) {
825 		/*
826 		 * received XFER RDY from the target
827 		 * need to send data to the target
828 		 */
829 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
830 		dd = fc_frame_payload_get(fp, sizeof(*dd));
831 		WARN_ON(!dd);
832 
833 		rc = fc_fcp_send_data(fsp, seq,
834 				      (size_t) ntohl(dd->ft_data_ro),
835 				      (size_t) ntohl(dd->ft_burst_len));
836 		if (!rc)
837 			seq->rec_data = fsp->xfer_len;
838 	} else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
839 		/*
840 		 * received a DATA frame
841 		 * next we will copy the data to the system buffer
842 		 */
843 		WARN_ON(fr_len(fp) < sizeof(*fh));	/* len may be 0 */
844 		fc_fcp_recv_data(fsp, fp);
845 		seq->rec_data = fsp->xfer_contig_end;
846 	} else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
847 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
848 
849 		fc_fcp_resp(fsp, fp);
850 	} else {
851 		FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
852 	}
853 unlock:
854 	fc_fcp_unlock_pkt(fsp);
855 out:
856 	fc_frame_free(fp);
857 }
858 
859 /**
860  * fc_fcp_resp() - Handler for FCP responses
861  * @fsp: The FCP packet the response is for
862  * @fp:	 The response frame
863  */
864 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
865 {
866 	struct fc_frame_header *fh;
867 	struct fcp_resp *fc_rp;
868 	struct fcp_resp_ext *rp_ex;
869 	struct fcp_resp_rsp_info *fc_rp_info;
870 	u32 plen;
871 	u32 expected_len;
872 	u32 respl = 0;
873 	u32 snsl = 0;
874 	u8 flags = 0;
875 
876 	plen = fr_len(fp);
877 	fh = (struct fc_frame_header *)fr_hdr(fp);
878 	if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
879 		goto len_err;
880 	plen -= sizeof(*fh);
881 	fc_rp = (struct fcp_resp *)(fh + 1);
882 	fsp->cdb_status = fc_rp->fr_status;
883 	flags = fc_rp->fr_flags;
884 	fsp->scsi_comp_flags = flags;
885 	expected_len = fsp->data_len;
886 
887 	/* if ddp, update xfer len */
888 	fc_fcp_ddp_done(fsp);
889 
890 	if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
891 		rp_ex = (void *)(fc_rp + 1);
892 		if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
893 			if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
894 				goto len_err;
895 			fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
896 			if (flags & FCP_RSP_LEN_VAL) {
897 				respl = ntohl(rp_ex->fr_rsp_len);
898 				if ((respl != FCP_RESP_RSP_INFO_LEN4) &&
899 				    (respl != FCP_RESP_RSP_INFO_LEN8))
900 					goto len_err;
901 				if (fsp->wait_for_comp) {
902 					/* Abuse cdb_status for rsp code */
903 					fsp->cdb_status = fc_rp_info->rsp_code;
904 					complete(&fsp->tm_done);
905 					/*
906 					 * tmfs will not have any scsi cmd so
907 					 * exit here
908 					 */
909 					return;
910 				}
911 			}
912 			if (flags & FCP_SNS_LEN_VAL) {
913 				snsl = ntohl(rp_ex->fr_sns_len);
914 				if (snsl > SCSI_SENSE_BUFFERSIZE)
915 					snsl = SCSI_SENSE_BUFFERSIZE;
916 				memcpy(fsp->cmd->sense_buffer,
917 				       (char *)fc_rp_info + respl, snsl);
918 			}
919 		}
920 		if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
921 			if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
922 				goto len_err;
923 			if (flags & FCP_RESID_UNDER) {
924 				fsp->scsi_resid = ntohl(rp_ex->fr_resid);
925 				/*
926 				 * The cmnd->underflow is the minimum number of
927 				 * bytes that must be transferred for this
928 				 * command.  Provided a sense condition is not
929 				 * present, make sure the actual amount
930 				 * transferred is at least the underflow value
931 				 * or fail.
932 				 */
933 				if (!(flags & FCP_SNS_LEN_VAL) &&
934 				    (fc_rp->fr_status == 0) &&
935 				    (scsi_bufflen(fsp->cmd) -
936 				     fsp->scsi_resid) < fsp->cmd->underflow)
937 					goto err;
938 				expected_len -= fsp->scsi_resid;
939 			} else {
940 				fsp->status_code = FC_ERROR;
941 			}
942 		}
943 	}
944 	fsp->state |= FC_SRB_RCV_STATUS;
945 
946 	/*
947 	 * Check for missing or extra data frames.
948 	 */
949 	if (unlikely(fsp->cdb_status == SAM_STAT_GOOD &&
950 		     fsp->xfer_len != expected_len)) {
951 		if (fsp->xfer_len < expected_len) {
952 			/*
953 			 * Some data may be queued locally,
954 			 * Wait a at least one jiffy to see if it is delivered.
955 			 * If this expires without data, we may do SRR.
956 			 */
957 			if (fsp->lp->qfull) {
958 				FC_FCP_DBG(fsp, "tgt %6.6x queue busy retry\n",
959 					   fsp->rport->port_id);
960 				return;
961 			}
962 			FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx data underrun "
963 				   "len %x, data len %x\n",
964 				   fsp->rport->port_id,
965 				   fsp->xfer_len, expected_len, fsp->data_len);
966 			fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
967 			return;
968 		}
969 		fsp->status_code = FC_DATA_OVRRUN;
970 		FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
971 			   "len %x, data len %x\n",
972 			   fsp->rport->port_id,
973 			   fsp->xfer_len, expected_len, fsp->data_len);
974 	}
975 	fc_fcp_complete_locked(fsp);
976 	return;
977 
978 len_err:
979 	FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
980 		   "snsl %u\n", flags, fr_len(fp), respl, snsl);
981 err:
982 	fsp->status_code = FC_ERROR;
983 	fc_fcp_complete_locked(fsp);
984 }
985 
986 /**
987  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
988  *			      fcp_pkt lock held
989  * @fsp: The FCP packet to be completed
990  *
991  * This function may sleep if a timer is pending. The packet lock must be
992  * held, and the host lock must not be held.
993  */
994 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
995 {
996 	struct fc_lport *lport = fsp->lp;
997 	struct fc_seq *seq;
998 	struct fc_exch *ep;
999 	u32 f_ctl;
1000 
1001 	if (fsp->state & FC_SRB_ABORT_PENDING)
1002 		return;
1003 
1004 	if (fsp->state & FC_SRB_ABORTED) {
1005 		if (!fsp->status_code)
1006 			fsp->status_code = FC_CMD_ABORTED;
1007 	} else {
1008 		/*
1009 		 * Test for transport underrun, independent of response
1010 		 * underrun status.
1011 		 */
1012 		if (fsp->cdb_status == SAM_STAT_GOOD &&
1013 		    fsp->xfer_len < fsp->data_len && !fsp->io_status &&
1014 		    (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
1015 		     fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
1016 			FC_FCP_DBG(fsp, "data underrun, xfer %zx data %x\n",
1017 				    fsp->xfer_len, fsp->data_len);
1018 			fsp->status_code = FC_DATA_UNDRUN;
1019 		}
1020 	}
1021 
1022 	seq = fsp->seq_ptr;
1023 	if (seq) {
1024 		fsp->seq_ptr = NULL;
1025 		if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
1026 			struct fc_frame *conf_frame;
1027 			struct fc_seq *csp;
1028 
1029 			csp = fc_seq_start_next(seq);
1030 			conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
1031 			if (conf_frame) {
1032 				f_ctl = FC_FC_SEQ_INIT;
1033 				f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
1034 				ep = fc_seq_exch(seq);
1035 				fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
1036 					       ep->did, ep->sid,
1037 					       FC_TYPE_FCP, f_ctl, 0);
1038 				fc_seq_send(lport, csp, conf_frame);
1039 			}
1040 		}
1041 		fc_exch_done(seq);
1042 	}
1043 	/*
1044 	 * Some resets driven by SCSI are not I/Os and do not have
1045 	 * SCSI commands associated with the requests. We should not
1046 	 * call I/O completion if we do not have a SCSI command.
1047 	 */
1048 	if (fsp->cmd)
1049 		fc_io_compl(fsp);
1050 }
1051 
1052 /**
1053  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
1054  * @fsp:   The FCP packet whose exchanges should be canceled
1055  * @error: The reason for the cancellation
1056  */
1057 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
1058 {
1059 	if (fsp->seq_ptr) {
1060 		fc_exch_done(fsp->seq_ptr);
1061 		fsp->seq_ptr = NULL;
1062 	}
1063 	fsp->status_code = error;
1064 }
1065 
1066 /**
1067  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1068  * @lport: The local port whose exchanges should be canceled
1069  * @id:	   The target's ID
1070  * @lun:   The LUN
1071  * @error: The reason for cancellation
1072  *
1073  * If lun or id is -1, they are ignored.
1074  */
1075 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1076 				    unsigned int lun, int error)
1077 {
1078 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1079 	struct fc_fcp_pkt *fsp;
1080 	struct scsi_cmnd *sc_cmd;
1081 	unsigned long flags;
1082 
1083 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1084 restart:
1085 	list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1086 		sc_cmd = fsp->cmd;
1087 		if (id != -1 && scmd_id(sc_cmd) != id)
1088 			continue;
1089 
1090 		if (lun != -1 && sc_cmd->device->lun != lun)
1091 			continue;
1092 
1093 		fc_fcp_pkt_hold(fsp);
1094 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1095 
1096 		spin_lock_bh(&fsp->scsi_pkt_lock);
1097 		if (!(fsp->state & FC_SRB_COMPL)) {
1098 			fsp->state |= FC_SRB_COMPL;
1099 			/*
1100 			 * TODO: dropping scsi_pkt_lock and then reacquiring
1101 			 * again around fc_fcp_cleanup_cmd() is required,
1102 			 * since fc_fcp_cleanup_cmd() calls into
1103 			 * fc_seq_set_resp() and that func preempts cpu using
1104 			 * schedule. May be schedule and related code should be
1105 			 * removed instead of unlocking here to avoid scheduling
1106 			 * while atomic bug.
1107 			 */
1108 			spin_unlock_bh(&fsp->scsi_pkt_lock);
1109 
1110 			fc_fcp_cleanup_cmd(fsp, error);
1111 
1112 			spin_lock_bh(&fsp->scsi_pkt_lock);
1113 			fc_io_compl(fsp);
1114 		}
1115 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1116 
1117 		fc_fcp_pkt_release(fsp);
1118 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1119 		/*
1120 		 * while we dropped the lock multiple pkts could
1121 		 * have been released, so we have to start over.
1122 		 */
1123 		goto restart;
1124 	}
1125 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1126 }
1127 
1128 /**
1129  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1130  * @lport: The local port whose exchanges are to be aborted
1131  */
1132 static void fc_fcp_abort_io(struct fc_lport *lport)
1133 {
1134 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1135 }
1136 
1137 /**
1138  * fc_fcp_pkt_send() - Send a fcp_pkt
1139  * @lport: The local port to send the FCP packet on
1140  * @fsp:   The FCP packet to send
1141  *
1142  * Return:  Zero for success and -1 for failure
1143  * Locks:   Called without locks held
1144  */
1145 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1146 {
1147 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1148 	unsigned long flags;
1149 	int rc;
1150 
1151 	fsp->cmd->SCp.ptr = (char *)fsp;
1152 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1153 	fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1154 
1155 	int_to_scsilun(fsp->cmd->device->lun, &fsp->cdb_cmd.fc_lun);
1156 	memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1157 
1158 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1159 	list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1160 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1161 	rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1162 	if (unlikely(rc)) {
1163 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1164 		fsp->cmd->SCp.ptr = NULL;
1165 		list_del(&fsp->list);
1166 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1167 	}
1168 
1169 	return rc;
1170 }
1171 
1172 /**
1173  * fc_fcp_cmd_send() - Send a FCP command
1174  * @lport: The local port to send the command on
1175  * @fsp:   The FCP packet the command is on
1176  * @resp:  The handler for the response
1177  */
1178 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1179 			   void (*resp)(struct fc_seq *,
1180 					struct fc_frame *fp,
1181 					void *arg))
1182 {
1183 	struct fc_frame *fp;
1184 	struct fc_seq *seq;
1185 	struct fc_rport *rport;
1186 	struct fc_rport_libfc_priv *rpriv;
1187 	const size_t len = sizeof(fsp->cdb_cmd);
1188 	int rc = 0;
1189 
1190 	if (fc_fcp_lock_pkt(fsp))
1191 		return 0;
1192 
1193 	fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1194 	if (!fp) {
1195 		rc = -1;
1196 		goto unlock;
1197 	}
1198 
1199 	memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1200 	fr_fsp(fp) = fsp;
1201 	rport = fsp->rport;
1202 	fsp->max_payload = rport->maxframe_size;
1203 	rpriv = rport->dd_data;
1204 
1205 	fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1206 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1207 		       FC_FCTL_REQ, 0);
1208 
1209 	seq = fc_exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy, fsp, 0);
1210 	if (!seq) {
1211 		rc = -1;
1212 		goto unlock;
1213 	}
1214 	fsp->seq_ptr = seq;
1215 	fc_fcp_pkt_hold(fsp);	/* hold for fc_fcp_pkt_destroy */
1216 
1217 	fsp->timer.function = fc_fcp_timeout;
1218 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1219 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1220 
1221 unlock:
1222 	fc_fcp_unlock_pkt(fsp);
1223 	return rc;
1224 }
1225 
1226 /**
1227  * fc_fcp_error() - Handler for FCP layer errors
1228  * @fsp: The FCP packet the error is on
1229  * @fp:	 The frame that has errored
1230  */
1231 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1232 {
1233 	int error = PTR_ERR(fp);
1234 
1235 	if (fc_fcp_lock_pkt(fsp))
1236 		return;
1237 
1238 	if (error == -FC_EX_CLOSED) {
1239 		fc_fcp_retry_cmd(fsp, FC_ERROR);
1240 		goto unlock;
1241 	}
1242 
1243 	/*
1244 	 * clear abort pending, because the lower layer
1245 	 * decided to force completion.
1246 	 */
1247 	fsp->state &= ~FC_SRB_ABORT_PENDING;
1248 	fsp->status_code = FC_CMD_PLOGO;
1249 	fc_fcp_complete_locked(fsp);
1250 unlock:
1251 	fc_fcp_unlock_pkt(fsp);
1252 }
1253 
1254 /**
1255  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1256  * @fsp:   The FCP packet to abort on
1257  *
1258  * Called to send an abort and then wait for abort completion
1259  */
1260 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1261 {
1262 	int rc = FAILED;
1263 	unsigned long ticks_left;
1264 
1265 	FC_FCP_DBG(fsp, "pkt abort state %x\n", fsp->state);
1266 	if (fc_fcp_send_abort(fsp)) {
1267 		FC_FCP_DBG(fsp, "failed to send abort\n");
1268 		return FAILED;
1269 	}
1270 
1271 	if (fsp->state & FC_SRB_ABORTED) {
1272 		FC_FCP_DBG(fsp, "target abort cmd  completed\n");
1273 		return SUCCESS;
1274 	}
1275 
1276 	init_completion(&fsp->tm_done);
1277 	fsp->wait_for_comp = 1;
1278 
1279 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1280 	ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1281 							FC_SCSI_TM_TOV);
1282 	spin_lock_bh(&fsp->scsi_pkt_lock);
1283 	fsp->wait_for_comp = 0;
1284 
1285 	if (!ticks_left) {
1286 		FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1287 	} else if (fsp->state & FC_SRB_ABORTED) {
1288 		FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1289 		rc = SUCCESS;
1290 		fc_fcp_complete_locked(fsp);
1291 	}
1292 
1293 	return rc;
1294 }
1295 
1296 /**
1297  * fc_lun_reset_send() - Send LUN reset command
1298  * @data: The FCP packet that identifies the LUN to be reset
1299  */
1300 static void fc_lun_reset_send(struct timer_list *t)
1301 {
1302 	struct fc_fcp_pkt *fsp = from_timer(fsp, t, timer);
1303 	struct fc_lport *lport = fsp->lp;
1304 
1305 	if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1306 		if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1307 			return;
1308 		if (fc_fcp_lock_pkt(fsp))
1309 			return;
1310 		fsp->timer.function = fc_lun_reset_send;
1311 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1312 		fc_fcp_unlock_pkt(fsp);
1313 	}
1314 }
1315 
1316 /**
1317  * fc_lun_reset() - Send a LUN RESET command to a device
1318  *		    and wait for the reply
1319  * @lport: The local port to sent the command on
1320  * @fsp:   The FCP packet that identifies the LUN to be reset
1321  * @id:	   The SCSI command ID
1322  * @lun:   The LUN ID to be reset
1323  */
1324 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1325 			unsigned int id, unsigned int lun)
1326 {
1327 	int rc;
1328 
1329 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1330 	fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1331 	int_to_scsilun(lun, &fsp->cdb_cmd.fc_lun);
1332 
1333 	fsp->wait_for_comp = 1;
1334 	init_completion(&fsp->tm_done);
1335 
1336 	fc_lun_reset_send(&fsp->timer);
1337 
1338 	/*
1339 	 * wait for completion of reset
1340 	 * after that make sure all commands are terminated
1341 	 */
1342 	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1343 
1344 	spin_lock_bh(&fsp->scsi_pkt_lock);
1345 	fsp->state |= FC_SRB_COMPL;
1346 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1347 
1348 	del_timer_sync(&fsp->timer);
1349 
1350 	spin_lock_bh(&fsp->scsi_pkt_lock);
1351 	if (fsp->seq_ptr) {
1352 		fc_exch_done(fsp->seq_ptr);
1353 		fsp->seq_ptr = NULL;
1354 	}
1355 	fsp->wait_for_comp = 0;
1356 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1357 
1358 	if (!rc) {
1359 		FC_SCSI_DBG(lport, "lun reset failed\n");
1360 		return FAILED;
1361 	}
1362 
1363 	/* cdb_status holds the tmf's rsp code */
1364 	if (fsp->cdb_status != FCP_TMF_CMPL)
1365 		return FAILED;
1366 
1367 	FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1368 	fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1369 	return SUCCESS;
1370 }
1371 
1372 /**
1373  * fc_tm_done() - Task Management response handler
1374  * @seq: The sequence that the response is on
1375  * @fp:	 The response frame
1376  * @arg: The FCP packet the response is for
1377  */
1378 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1379 {
1380 	struct fc_fcp_pkt *fsp = arg;
1381 	struct fc_frame_header *fh;
1382 
1383 	if (IS_ERR(fp)) {
1384 		/*
1385 		 * If there is an error just let it timeout or wait
1386 		 * for TMF to be aborted if it timedout.
1387 		 *
1388 		 * scsi-eh will escalate for when either happens.
1389 		 */
1390 		return;
1391 	}
1392 
1393 	if (fc_fcp_lock_pkt(fsp))
1394 		goto out;
1395 
1396 	/*
1397 	 * raced with eh timeout handler.
1398 	 */
1399 	if (!fsp->seq_ptr || !fsp->wait_for_comp)
1400 		goto out_unlock;
1401 
1402 	fh = fc_frame_header_get(fp);
1403 	if (fh->fh_type != FC_TYPE_BLS)
1404 		fc_fcp_resp(fsp, fp);
1405 	fsp->seq_ptr = NULL;
1406 	fc_exch_done(seq);
1407 out_unlock:
1408 	fc_fcp_unlock_pkt(fsp);
1409 out:
1410 	fc_frame_free(fp);
1411 }
1412 
1413 /**
1414  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1415  * @lport: The local port to be cleaned up
1416  */
1417 static void fc_fcp_cleanup(struct fc_lport *lport)
1418 {
1419 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1420 }
1421 
1422 /**
1423  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1424  * @data: The FCP packet that has timed out
1425  *
1426  * If REC is supported then just issue it and return. The REC exchange will
1427  * complete or time out and recovery can continue at that point. Otherwise,
1428  * if the response has been received without all the data it has been
1429  * ER_TIMEOUT since the response was received. If the response has not been
1430  * received we see if data was received recently. If it has been then we
1431  * continue waiting, otherwise, we abort the command.
1432  */
1433 static void fc_fcp_timeout(struct timer_list *t)
1434 {
1435 	struct fc_fcp_pkt *fsp = from_timer(fsp, t, timer);
1436 	struct fc_rport *rport = fsp->rport;
1437 	struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1438 
1439 	if (fc_fcp_lock_pkt(fsp))
1440 		return;
1441 
1442 	if (fsp->cdb_cmd.fc_tm_flags)
1443 		goto unlock;
1444 
1445 	if (fsp->lp->qfull) {
1446 		FC_FCP_DBG(fsp, "fcp timeout, resetting timer delay %d\n",
1447 			   fsp->timer_delay);
1448 		fsp->timer.function = fc_fcp_timeout;
1449 		fc_fcp_timer_set(fsp, fsp->timer_delay);
1450 		goto unlock;
1451 	}
1452 	FC_FCP_DBG(fsp, "fcp timeout, delay %d flags %x state %x\n",
1453 		   fsp->timer_delay, rpriv->flags, fsp->state);
1454 	fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1455 
1456 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1457 		fc_fcp_rec(fsp);
1458 	else if (fsp->state & FC_SRB_RCV_STATUS)
1459 		fc_fcp_complete_locked(fsp);
1460 	else
1461 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1462 	fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1463 unlock:
1464 	fc_fcp_unlock_pkt(fsp);
1465 }
1466 
1467 /**
1468  * fc_fcp_rec() - Send a REC ELS request
1469  * @fsp: The FCP packet to send the REC request on
1470  */
1471 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1472 {
1473 	struct fc_lport *lport;
1474 	struct fc_frame *fp;
1475 	struct fc_rport *rport;
1476 	struct fc_rport_libfc_priv *rpriv;
1477 
1478 	lport = fsp->lp;
1479 	rport = fsp->rport;
1480 	rpriv = rport->dd_data;
1481 	if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1482 		fsp->status_code = FC_HRD_ERROR;
1483 		fsp->io_status = 0;
1484 		fc_fcp_complete_locked(fsp);
1485 		return;
1486 	}
1487 
1488 	fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1489 	if (!fp)
1490 		goto retry;
1491 
1492 	fr_seq(fp) = fsp->seq_ptr;
1493 	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1494 		       rpriv->local_port->port_id, FC_TYPE_ELS,
1495 		       FC_FCTL_REQ, 0);
1496 	if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1497 				 fc_fcp_rec_resp, fsp,
1498 				 2 * lport->r_a_tov)) {
1499 		fc_fcp_pkt_hold(fsp);		/* hold while REC outstanding */
1500 		return;
1501 	}
1502 retry:
1503 	if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1504 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1505 	else
1506 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1507 }
1508 
1509 /**
1510  * fc_fcp_rec_resp() - Handler for REC ELS responses
1511  * @seq: The sequence the response is on
1512  * @fp:	 The response frame
1513  * @arg: The FCP packet the response is on
1514  *
1515  * If the response is a reject then the scsi layer will handle
1516  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1517  * set the timeout and return. If the I/O was completed then complete the
1518  * exchange and tell the SCSI layer.
1519  */
1520 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1521 {
1522 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1523 	struct fc_els_rec_acc *recp;
1524 	struct fc_els_ls_rjt *rjt;
1525 	u32 e_stat;
1526 	u8 opcode;
1527 	u32 offset;
1528 	enum dma_data_direction data_dir;
1529 	enum fc_rctl r_ctl;
1530 	struct fc_rport_libfc_priv *rpriv;
1531 
1532 	if (IS_ERR(fp)) {
1533 		fc_fcp_rec_error(fsp, fp);
1534 		return;
1535 	}
1536 
1537 	if (fc_fcp_lock_pkt(fsp))
1538 		goto out;
1539 
1540 	fsp->recov_retry = 0;
1541 	opcode = fc_frame_payload_op(fp);
1542 	if (opcode == ELS_LS_RJT) {
1543 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1544 		switch (rjt->er_reason) {
1545 		default:
1546 			FC_FCP_DBG(fsp,
1547 				   "device %x invalid REC reject %d/%d\n",
1548 				   fsp->rport->port_id, rjt->er_reason,
1549 				   rjt->er_explan);
1550 			/* fall through */
1551 		case ELS_RJT_UNSUP:
1552 			FC_FCP_DBG(fsp, "device does not support REC\n");
1553 			rpriv = fsp->rport->dd_data;
1554 			/*
1555 			 * if we do not spport RECs or got some bogus
1556 			 * reason then resetup timer so we check for
1557 			 * making progress.
1558 			 */
1559 			rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1560 			break;
1561 		case ELS_RJT_LOGIC:
1562 		case ELS_RJT_UNAB:
1563 			FC_FCP_DBG(fsp, "device %x REC reject %d/%d\n",
1564 				   fsp->rport->port_id, rjt->er_reason,
1565 				   rjt->er_explan);
1566 			/*
1567 			 * If response got lost or is stuck in the
1568 			 * queue somewhere we have no idea if and when
1569 			 * the response will be received. So quarantine
1570 			 * the xid and retry the command.
1571 			 */
1572 			if (rjt->er_explan == ELS_EXPL_OXID_RXID) {
1573 				struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1574 				ep->state |= FC_EX_QUARANTINE;
1575 				fsp->state |= FC_SRB_ABORTED;
1576 				fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1577 				break;
1578 			}
1579 			fc_fcp_recovery(fsp, FC_TRANS_RESET);
1580 			break;
1581 		}
1582 	} else if (opcode == ELS_LS_ACC) {
1583 		if (fsp->state & FC_SRB_ABORTED)
1584 			goto unlock_out;
1585 
1586 		data_dir = fsp->cmd->sc_data_direction;
1587 		recp = fc_frame_payload_get(fp, sizeof(*recp));
1588 		offset = ntohl(recp->reca_fc4value);
1589 		e_stat = ntohl(recp->reca_e_stat);
1590 
1591 		if (e_stat & ESB_ST_COMPLETE) {
1592 
1593 			/*
1594 			 * The exchange is complete.
1595 			 *
1596 			 * For output, we must've lost the response.
1597 			 * For input, all data must've been sent.
1598 			 * We lost may have lost the response
1599 			 * (and a confirmation was requested) and maybe
1600 			 * some data.
1601 			 *
1602 			 * If all data received, send SRR
1603 			 * asking for response.	 If partial data received,
1604 			 * or gaps, SRR requests data at start of gap.
1605 			 * Recovery via SRR relies on in-order-delivery.
1606 			 */
1607 			if (data_dir == DMA_TO_DEVICE) {
1608 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1609 			} else if (fsp->xfer_contig_end == offset) {
1610 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1611 			} else {
1612 				offset = fsp->xfer_contig_end;
1613 				r_ctl = FC_RCTL_DD_SOL_DATA;
1614 			}
1615 			fc_fcp_srr(fsp, r_ctl, offset);
1616 		} else if (e_stat & ESB_ST_SEQ_INIT) {
1617 			/*
1618 			 * The remote port has the initiative, so just
1619 			 * keep waiting for it to complete.
1620 			 */
1621 			fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1622 		} else {
1623 
1624 			/*
1625 			 * The exchange is incomplete, we have seq. initiative.
1626 			 * Lost response with requested confirmation,
1627 			 * lost confirmation, lost transfer ready or
1628 			 * lost write data.
1629 			 *
1630 			 * For output, if not all data was received, ask
1631 			 * for transfer ready to be repeated.
1632 			 *
1633 			 * If we received or sent all the data, send SRR to
1634 			 * request response.
1635 			 *
1636 			 * If we lost a response, we may have lost some read
1637 			 * data as well.
1638 			 */
1639 			r_ctl = FC_RCTL_DD_SOL_DATA;
1640 			if (data_dir == DMA_TO_DEVICE) {
1641 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1642 				if (offset < fsp->data_len)
1643 					r_ctl = FC_RCTL_DD_DATA_DESC;
1644 			} else if (offset == fsp->xfer_contig_end) {
1645 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1646 			} else if (fsp->xfer_contig_end < offset) {
1647 				offset = fsp->xfer_contig_end;
1648 			}
1649 			fc_fcp_srr(fsp, r_ctl, offset);
1650 		}
1651 	}
1652 unlock_out:
1653 	fc_fcp_unlock_pkt(fsp);
1654 out:
1655 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1656 	fc_frame_free(fp);
1657 }
1658 
1659 /**
1660  * fc_fcp_rec_error() - Handler for REC errors
1661  * @fsp: The FCP packet the error is on
1662  * @fp:	 The REC frame
1663  */
1664 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1665 {
1666 	int error = PTR_ERR(fp);
1667 
1668 	if (fc_fcp_lock_pkt(fsp))
1669 		goto out;
1670 
1671 	switch (error) {
1672 	case -FC_EX_CLOSED:
1673 		FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange closed\n",
1674 			   fsp, fsp->rport->port_id);
1675 		fc_fcp_retry_cmd(fsp, FC_ERROR);
1676 		break;
1677 
1678 	default:
1679 		FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1680 			   fsp, fsp->rport->port_id, error);
1681 		fsp->status_code = FC_CMD_PLOGO;
1682 		/* fall through */
1683 
1684 	case -FC_EX_TIMEOUT:
1685 		/*
1686 		 * Assume REC or LS_ACC was lost.
1687 		 * The exchange manager will have aborted REC, so retry.
1688 		 */
1689 		FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange timeout retry %d/%d\n",
1690 			   fsp, fsp->rport->port_id, fsp->recov_retry,
1691 			   FC_MAX_RECOV_RETRY);
1692 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1693 			fc_fcp_rec(fsp);
1694 		else
1695 			fc_fcp_recovery(fsp, FC_ERROR);
1696 		break;
1697 	}
1698 	fc_fcp_unlock_pkt(fsp);
1699 out:
1700 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1701 }
1702 
1703 /**
1704  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1705  * @fsp: The FCP pkt that needs to be aborted
1706  */
1707 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1708 {
1709 	FC_FCP_DBG(fsp, "start recovery code %x\n", code);
1710 	fsp->status_code = code;
1711 	fsp->cdb_status = 0;
1712 	fsp->io_status = 0;
1713 	/*
1714 	 * if this fails then we let the scsi command timer fire and
1715 	 * scsi-ml escalate.
1716 	 */
1717 	fc_fcp_send_abort(fsp);
1718 }
1719 
1720 /**
1721  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1722  * @fsp:   The FCP packet the SRR is to be sent on
1723  * @r_ctl: The R_CTL field for the SRR request
1724  * This is called after receiving status but insufficient data, or
1725  * when expecting status but the request has timed out.
1726  */
1727 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1728 {
1729 	struct fc_lport *lport = fsp->lp;
1730 	struct fc_rport *rport;
1731 	struct fc_rport_libfc_priv *rpriv;
1732 	struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1733 	struct fc_seq *seq;
1734 	struct fcp_srr *srr;
1735 	struct fc_frame *fp;
1736 
1737 	rport = fsp->rport;
1738 	rpriv = rport->dd_data;
1739 
1740 	if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1741 	    rpriv->rp_state != RPORT_ST_READY)
1742 		goto retry;			/* shouldn't happen */
1743 	fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1744 	if (!fp)
1745 		goto retry;
1746 
1747 	srr = fc_frame_payload_get(fp, sizeof(*srr));
1748 	memset(srr, 0, sizeof(*srr));
1749 	srr->srr_op = ELS_SRR;
1750 	srr->srr_ox_id = htons(ep->oxid);
1751 	srr->srr_rx_id = htons(ep->rxid);
1752 	srr->srr_r_ctl = r_ctl;
1753 	srr->srr_rel_off = htonl(offset);
1754 
1755 	fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1756 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1757 		       FC_FCTL_REQ, 0);
1758 
1759 	seq = fc_exch_seq_send(lport, fp, fc_fcp_srr_resp,
1760 			       fc_fcp_pkt_destroy,
1761 			       fsp, get_fsp_rec_tov(fsp));
1762 	if (!seq)
1763 		goto retry;
1764 
1765 	fsp->recov_seq = seq;
1766 	fsp->xfer_len = offset;
1767 	fsp->xfer_contig_end = offset;
1768 	fsp->state &= ~FC_SRB_RCV_STATUS;
1769 	fc_fcp_pkt_hold(fsp);		/* hold for outstanding SRR */
1770 	return;
1771 retry:
1772 	fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1773 }
1774 
1775 /**
1776  * fc_fcp_srr_resp() - Handler for SRR response
1777  * @seq: The sequence the SRR is on
1778  * @fp:	 The SRR frame
1779  * @arg: The FCP packet the SRR is on
1780  */
1781 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1782 {
1783 	struct fc_fcp_pkt *fsp = arg;
1784 	struct fc_frame_header *fh;
1785 
1786 	if (IS_ERR(fp)) {
1787 		fc_fcp_srr_error(fsp, fp);
1788 		return;
1789 	}
1790 
1791 	if (fc_fcp_lock_pkt(fsp))
1792 		goto out;
1793 
1794 	fh = fc_frame_header_get(fp);
1795 	/*
1796 	 * BUG? fc_fcp_srr_error calls fc_exch_done which would release
1797 	 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1798 	 * then fc_exch_timeout would be sending an abort. The fc_exch_done
1799 	 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1800 	 * an abort response though.
1801 	 */
1802 	if (fh->fh_type == FC_TYPE_BLS) {
1803 		fc_fcp_unlock_pkt(fsp);
1804 		return;
1805 	}
1806 
1807 	switch (fc_frame_payload_op(fp)) {
1808 	case ELS_LS_ACC:
1809 		fsp->recov_retry = 0;
1810 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1811 		break;
1812 	case ELS_LS_RJT:
1813 	default:
1814 		fc_fcp_recovery(fsp, FC_ERROR);
1815 		break;
1816 	}
1817 	fc_fcp_unlock_pkt(fsp);
1818 out:
1819 	fc_exch_done(seq);
1820 	fc_frame_free(fp);
1821 }
1822 
1823 /**
1824  * fc_fcp_srr_error() - Handler for SRR errors
1825  * @fsp: The FCP packet that the SRR error is on
1826  * @fp:	 The SRR frame
1827  */
1828 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1829 {
1830 	if (fc_fcp_lock_pkt(fsp))
1831 		goto out;
1832 	switch (PTR_ERR(fp)) {
1833 	case -FC_EX_TIMEOUT:
1834 		FC_FCP_DBG(fsp, "SRR timeout, retries %d\n", fsp->recov_retry);
1835 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1836 			fc_fcp_rec(fsp);
1837 		else
1838 			fc_fcp_recovery(fsp, FC_TIMED_OUT);
1839 		break;
1840 	case -FC_EX_CLOSED:			/* e.g., link failure */
1841 		FC_FCP_DBG(fsp, "SRR error, exchange closed\n");
1842 		/* fall through */
1843 	default:
1844 		fc_fcp_retry_cmd(fsp, FC_ERROR);
1845 		break;
1846 	}
1847 	fc_fcp_unlock_pkt(fsp);
1848 out:
1849 	fc_exch_done(fsp->recov_seq);
1850 }
1851 
1852 /**
1853  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1854  * @lport: The local port to be checked
1855  */
1856 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1857 {
1858 	/* lock ? */
1859 	return (lport->state == LPORT_ST_READY) &&
1860 		lport->link_up && !lport->qfull;
1861 }
1862 
1863 /**
1864  * fc_queuecommand() - The queuecommand function of the SCSI template
1865  * @shost: The Scsi_Host that the command was issued to
1866  * @cmd:   The scsi_cmnd to be executed
1867  *
1868  * This is the i/o strategy routine, called by the SCSI layer.
1869  */
1870 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1871 {
1872 	struct fc_lport *lport = shost_priv(shost);
1873 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1874 	struct fc_fcp_pkt *fsp;
1875 	int rval;
1876 	int rc = 0;
1877 	struct fc_stats *stats;
1878 
1879 	rval = fc_remote_port_chkready(rport);
1880 	if (rval) {
1881 		sc_cmd->result = rval;
1882 		sc_cmd->scsi_done(sc_cmd);
1883 		return 0;
1884 	}
1885 
1886 	if (!*(struct fc_remote_port **)rport->dd_data) {
1887 		/*
1888 		 * rport is transitioning from blocked/deleted to
1889 		 * online
1890 		 */
1891 		sc_cmd->result = DID_IMM_RETRY << 16;
1892 		sc_cmd->scsi_done(sc_cmd);
1893 		goto out;
1894 	}
1895 
1896 	if (!fc_fcp_lport_queue_ready(lport)) {
1897 		if (lport->qfull) {
1898 			if (fc_fcp_can_queue_ramp_down(lport))
1899 				shost_printk(KERN_ERR, lport->host,
1900 					     "libfc: queue full, "
1901 					     "reducing can_queue to %d.\n",
1902 					     lport->host->can_queue);
1903 		}
1904 		rc = SCSI_MLQUEUE_HOST_BUSY;
1905 		goto out;
1906 	}
1907 
1908 	fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1909 	if (fsp == NULL) {
1910 		rc = SCSI_MLQUEUE_HOST_BUSY;
1911 		goto out;
1912 	}
1913 
1914 	/*
1915 	 * build the libfc request pkt
1916 	 */
1917 	fsp->cmd = sc_cmd;	/* save the cmd */
1918 	fsp->rport = rport;	/* set the remote port ptr */
1919 
1920 	/*
1921 	 * set up the transfer length
1922 	 */
1923 	fsp->data_len = scsi_bufflen(sc_cmd);
1924 	fsp->xfer_len = 0;
1925 
1926 	/*
1927 	 * setup the data direction
1928 	 */
1929 	stats = per_cpu_ptr(lport->stats, get_cpu());
1930 	if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1931 		fsp->req_flags = FC_SRB_READ;
1932 		stats->InputRequests++;
1933 		stats->InputBytes += fsp->data_len;
1934 	} else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1935 		fsp->req_flags = FC_SRB_WRITE;
1936 		stats->OutputRequests++;
1937 		stats->OutputBytes += fsp->data_len;
1938 	} else {
1939 		fsp->req_flags = 0;
1940 		stats->ControlRequests++;
1941 	}
1942 	put_cpu();
1943 
1944 	/*
1945 	 * send it to the lower layer
1946 	 * if we get -1 return then put the request in the pending
1947 	 * queue.
1948 	 */
1949 	rval = fc_fcp_pkt_send(lport, fsp);
1950 	if (rval != 0) {
1951 		fsp->state = FC_SRB_FREE;
1952 		fc_fcp_pkt_release(fsp);
1953 		rc = SCSI_MLQUEUE_HOST_BUSY;
1954 	}
1955 out:
1956 	return rc;
1957 }
1958 EXPORT_SYMBOL(fc_queuecommand);
1959 
1960 /**
1961  * fc_io_compl() - Handle responses for completed commands
1962  * @fsp: The FCP packet that is complete
1963  *
1964  * Translates fcp_pkt errors to a Linux SCSI errors.
1965  * The fcp packet lock must be held when calling.
1966  */
1967 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1968 {
1969 	struct fc_fcp_internal *si;
1970 	struct scsi_cmnd *sc_cmd;
1971 	struct fc_lport *lport;
1972 	unsigned long flags;
1973 
1974 	/* release outstanding ddp context */
1975 	fc_fcp_ddp_done(fsp);
1976 
1977 	fsp->state |= FC_SRB_COMPL;
1978 	if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1979 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1980 		del_timer_sync(&fsp->timer);
1981 		spin_lock_bh(&fsp->scsi_pkt_lock);
1982 	}
1983 
1984 	lport = fsp->lp;
1985 	si = fc_get_scsi_internal(lport);
1986 
1987 	/*
1988 	 * if can_queue ramp down is done then try can_queue ramp up
1989 	 * since commands are completing now.
1990 	 */
1991 	if (si->last_can_queue_ramp_down_time)
1992 		fc_fcp_can_queue_ramp_up(lport);
1993 
1994 	sc_cmd = fsp->cmd;
1995 	CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1996 	switch (fsp->status_code) {
1997 	case FC_COMPLETE:
1998 		if (fsp->cdb_status == 0) {
1999 			/*
2000 			 * good I/O status
2001 			 */
2002 			sc_cmd->result = DID_OK << 16;
2003 			if (fsp->scsi_resid)
2004 				CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
2005 		} else {
2006 			/*
2007 			 * transport level I/O was ok but scsi
2008 			 * has non zero status
2009 			 */
2010 			sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
2011 		}
2012 		break;
2013 	case FC_ERROR:
2014 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2015 			   "due to FC_ERROR\n");
2016 		sc_cmd->result = DID_ERROR << 16;
2017 		break;
2018 	case FC_DATA_UNDRUN:
2019 		if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
2020 			/*
2021 			 * scsi status is good but transport level
2022 			 * underrun.
2023 			 */
2024 			if (fsp->state & FC_SRB_RCV_STATUS) {
2025 				sc_cmd->result = DID_OK << 16;
2026 			} else {
2027 				FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
2028 					   " due to FC_DATA_UNDRUN (trans)\n");
2029 				sc_cmd->result = DID_ERROR << 16;
2030 			}
2031 		} else {
2032 			/*
2033 			 * scsi got underrun, this is an error
2034 			 */
2035 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2036 				   "due to FC_DATA_UNDRUN (scsi)\n");
2037 			CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
2038 			sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2039 		}
2040 		break;
2041 	case FC_DATA_OVRRUN:
2042 		/*
2043 		 * overrun is an error
2044 		 */
2045 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2046 			   "due to FC_DATA_OVRRUN\n");
2047 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2048 		break;
2049 	case FC_CMD_ABORTED:
2050 		if (host_byte(sc_cmd->result) == DID_TIME_OUT)
2051 			FC_FCP_DBG(fsp, "Returning DID_TIME_OUT to scsi-ml "
2052 				   "due to FC_CMD_ABORTED\n");
2053 		else {
2054 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2055 				   "due to FC_CMD_ABORTED\n");
2056 			set_host_byte(sc_cmd, DID_ERROR);
2057 		}
2058 		sc_cmd->result |= fsp->io_status;
2059 		break;
2060 	case FC_CMD_RESET:
2061 		FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
2062 			   "due to FC_CMD_RESET\n");
2063 		sc_cmd->result = (DID_RESET << 16);
2064 		break;
2065 	case FC_TRANS_RESET:
2066 		FC_FCP_DBG(fsp, "Returning DID_SOFT_ERROR to scsi-ml "
2067 			   "due to FC_TRANS_RESET\n");
2068 		sc_cmd->result = (DID_SOFT_ERROR << 16);
2069 		break;
2070 	case FC_HRD_ERROR:
2071 		FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
2072 			   "due to FC_HRD_ERROR\n");
2073 		sc_cmd->result = (DID_NO_CONNECT << 16);
2074 		break;
2075 	case FC_CRC_ERROR:
2076 		FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
2077 			   "due to FC_CRC_ERROR\n");
2078 		sc_cmd->result = (DID_PARITY << 16);
2079 		break;
2080 	case FC_TIMED_OUT:
2081 		FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
2082 			   "due to FC_TIMED_OUT\n");
2083 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
2084 		break;
2085 	default:
2086 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2087 			   "due to unknown error\n");
2088 		sc_cmd->result = (DID_ERROR << 16);
2089 		break;
2090 	}
2091 
2092 	if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2093 		sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2094 
2095 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2096 	list_del(&fsp->list);
2097 	sc_cmd->SCp.ptr = NULL;
2098 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2099 	sc_cmd->scsi_done(sc_cmd);
2100 
2101 	/* release ref from initial allocation in queue command */
2102 	fc_fcp_pkt_release(fsp);
2103 }
2104 
2105 /**
2106  * fc_eh_abort() - Abort a command
2107  * @sc_cmd: The SCSI command to abort
2108  *
2109  * From SCSI host template.
2110  * Send an ABTS to the target device and wait for the response.
2111  */
2112 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2113 {
2114 	struct fc_fcp_pkt *fsp;
2115 	struct fc_lport *lport;
2116 	struct fc_fcp_internal *si;
2117 	int rc = FAILED;
2118 	unsigned long flags;
2119 	int rval;
2120 
2121 	rval = fc_block_scsi_eh(sc_cmd);
2122 	if (rval)
2123 		return rval;
2124 
2125 	lport = shost_priv(sc_cmd->device->host);
2126 	if (lport->state != LPORT_ST_READY)
2127 		return rc;
2128 	else if (!lport->link_up)
2129 		return rc;
2130 
2131 	si = fc_get_scsi_internal(lport);
2132 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2133 	fsp = CMD_SP(sc_cmd);
2134 	if (!fsp) {
2135 		/* command completed while scsi eh was setting up */
2136 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2137 		return SUCCESS;
2138 	}
2139 	/* grab a ref so the fsp and sc_cmd cannot be released from under us */
2140 	fc_fcp_pkt_hold(fsp);
2141 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2142 
2143 	if (fc_fcp_lock_pkt(fsp)) {
2144 		/* completed while we were waiting for timer to be deleted */
2145 		rc = SUCCESS;
2146 		goto release_pkt;
2147 	}
2148 
2149 	rc = fc_fcp_pkt_abort(fsp);
2150 	fc_fcp_unlock_pkt(fsp);
2151 
2152 release_pkt:
2153 	fc_fcp_pkt_release(fsp);
2154 	return rc;
2155 }
2156 EXPORT_SYMBOL(fc_eh_abort);
2157 
2158 /**
2159  * fc_eh_device_reset() - Reset a single LUN
2160  * @sc_cmd: The SCSI command which identifies the device whose
2161  *	    LUN is to be reset
2162  *
2163  * Set from SCSI host template.
2164  */
2165 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2166 {
2167 	struct fc_lport *lport;
2168 	struct fc_fcp_pkt *fsp;
2169 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2170 	int rc = FAILED;
2171 	int rval;
2172 
2173 	rval = fc_block_scsi_eh(sc_cmd);
2174 	if (rval)
2175 		return rval;
2176 
2177 	lport = shost_priv(sc_cmd->device->host);
2178 
2179 	if (lport->state != LPORT_ST_READY)
2180 		return rc;
2181 
2182 	FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2183 
2184 	fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2185 	if (fsp == NULL) {
2186 		printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2187 		goto out;
2188 	}
2189 
2190 	/*
2191 	 * Build the libfc request pkt. Do not set the scsi cmnd, because
2192 	 * the sc passed in is not setup for execution like when sent
2193 	 * through the queuecommand callout.
2194 	 */
2195 	fsp->rport = rport;	/* set the remote port ptr */
2196 
2197 	/*
2198 	 * flush outstanding commands
2199 	 */
2200 	rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2201 	fsp->state = FC_SRB_FREE;
2202 	fc_fcp_pkt_release(fsp);
2203 
2204 out:
2205 	return rc;
2206 }
2207 EXPORT_SYMBOL(fc_eh_device_reset);
2208 
2209 /**
2210  * fc_eh_host_reset() - Reset a Scsi_Host.
2211  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2212  */
2213 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2214 {
2215 	struct Scsi_Host *shost = sc_cmd->device->host;
2216 	struct fc_lport *lport = shost_priv(shost);
2217 	unsigned long wait_tmo;
2218 
2219 	FC_SCSI_DBG(lport, "Resetting host\n");
2220 
2221 	fc_lport_reset(lport);
2222 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2223 	while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2224 							       wait_tmo))
2225 		msleep(1000);
2226 
2227 	if (fc_fcp_lport_queue_ready(lport)) {
2228 		shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2229 			     "on port (%6.6x)\n", lport->port_id);
2230 		return SUCCESS;
2231 	} else {
2232 		shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2233 			     "port (%6.6x) is not ready.\n",
2234 			     lport->port_id);
2235 		return FAILED;
2236 	}
2237 }
2238 EXPORT_SYMBOL(fc_eh_host_reset);
2239 
2240 /**
2241  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2242  * @sdev: The SCSI device that identifies the SCSI host
2243  *
2244  * Configures queue depth based on host's cmd_per_len. If not set
2245  * then we use the libfc default.
2246  */
2247 int fc_slave_alloc(struct scsi_device *sdev)
2248 {
2249 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2250 
2251 	if (!rport || fc_remote_port_chkready(rport))
2252 		return -ENXIO;
2253 
2254 	scsi_change_queue_depth(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2255 	return 0;
2256 }
2257 EXPORT_SYMBOL(fc_slave_alloc);
2258 
2259 /**
2260  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2261  * @lport: The local port that no longer needs the FCP layer
2262  */
2263 void fc_fcp_destroy(struct fc_lport *lport)
2264 {
2265 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2266 
2267 	if (!list_empty(&si->scsi_pkt_queue))
2268 		printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2269 		       "port (%6.6x)\n", lport->port_id);
2270 
2271 	mempool_destroy(si->scsi_pkt_pool);
2272 	kfree(si);
2273 	lport->scsi_priv = NULL;
2274 }
2275 EXPORT_SYMBOL(fc_fcp_destroy);
2276 
2277 int fc_setup_fcp(void)
2278 {
2279 	int rc = 0;
2280 
2281 	scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2282 					    sizeof(struct fc_fcp_pkt),
2283 					    0, SLAB_HWCACHE_ALIGN, NULL);
2284 	if (!scsi_pkt_cachep) {
2285 		printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2286 		       "module load failed!");
2287 		rc = -ENOMEM;
2288 	}
2289 
2290 	return rc;
2291 }
2292 
2293 void fc_destroy_fcp(void)
2294 {
2295 	kmem_cache_destroy(scsi_pkt_cachep);
2296 }
2297 
2298 /**
2299  * fc_fcp_init() - Initialize the FCP layer for a local port
2300  * @lport: The local port to initialize the exchange layer for
2301  */
2302 int fc_fcp_init(struct fc_lport *lport)
2303 {
2304 	int rc;
2305 	struct fc_fcp_internal *si;
2306 
2307 	if (!lport->tt.fcp_cmd_send)
2308 		lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2309 
2310 	if (!lport->tt.fcp_cleanup)
2311 		lport->tt.fcp_cleanup = fc_fcp_cleanup;
2312 
2313 	if (!lport->tt.fcp_abort_io)
2314 		lport->tt.fcp_abort_io = fc_fcp_abort_io;
2315 
2316 	si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2317 	if (!si)
2318 		return -ENOMEM;
2319 	lport->scsi_priv = si;
2320 	si->max_can_queue = lport->host->can_queue;
2321 	INIT_LIST_HEAD(&si->scsi_pkt_queue);
2322 	spin_lock_init(&si->scsi_queue_lock);
2323 
2324 	si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2325 	if (!si->scsi_pkt_pool) {
2326 		rc = -ENOMEM;
2327 		goto free_internal;
2328 	}
2329 	return 0;
2330 
2331 free_internal:
2332 	kfree(si);
2333 	return rc;
2334 }
2335 EXPORT_SYMBOL(fc_fcp_init);
2336