xref: /openbmc/linux/drivers/scsi/libfc/fc_fcp.c (revision 565d76cb)
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21 
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31 
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37 
38 #include <scsi/fc/fc_fc2.h>
39 
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42 
43 #include "fc_libfc.h"
44 
45 static struct kmem_cache *scsi_pkt_cachep;
46 
47 /* SRB state definitions */
48 #define FC_SRB_FREE		0		/* cmd is free */
49 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
50 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
51 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
52 #define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
53 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
54 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
56 
57 #define FC_SRB_READ		(1 << 1)
58 #define FC_SRB_WRITE		(1 << 0)
59 
60 /* constant added to e_d_tov timeout to get rec_tov value */
61 #define REC_TOV_CONST		1
62 
63 /*
64  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
65  */
66 #define CMD_SP(Cmnd)		    ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
67 #define CMD_ENTRY_STATUS(Cmnd)	    ((Cmnd)->SCp.have_data_in)
68 #define CMD_COMPL_STATUS(Cmnd)	    ((Cmnd)->SCp.this_residual)
69 #define CMD_SCSI_STATUS(Cmnd)	    ((Cmnd)->SCp.Status)
70 #define CMD_RESID_LEN(Cmnd)	    ((Cmnd)->SCp.buffers_residual)
71 
72 /**
73  * struct fc_fcp_internal - FCP layer internal data
74  * @scsi_pkt_pool: Memory pool to draw FCP packets from
75  * @scsi_queue_lock: Protects the scsi_pkt_queue
76  * @scsi_pkt_queue: Current FCP packets
77  * @last_can_queue_ramp_down_time: ramp down time
78  * @last_can_queue_ramp_up_time: ramp up time
79  * @max_can_queue: max can_queue size
80  */
81 struct fc_fcp_internal {
82 	mempool_t		*scsi_pkt_pool;
83 	spinlock_t		scsi_queue_lock;
84 	struct list_head	scsi_pkt_queue;
85 	unsigned long		last_can_queue_ramp_down_time;
86 	unsigned long		last_can_queue_ramp_up_time;
87 	int			max_can_queue;
88 };
89 
90 #define fc_get_scsi_internal(x)	((struct fc_fcp_internal *)(x)->scsi_priv)
91 
92 /*
93  * function prototypes
94  * FC scsi I/O related functions
95  */
96 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
97 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
100 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
101 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
102 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
103 static void fc_fcp_timeout(unsigned long);
104 static void fc_fcp_rec(struct fc_fcp_pkt *);
105 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
106 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
107 static void fc_io_compl(struct fc_fcp_pkt *);
108 
109 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
110 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
111 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
112 
113 /*
114  * command status codes
115  */
116 #define FC_COMPLETE		0
117 #define FC_CMD_ABORTED		1
118 #define FC_CMD_RESET		2
119 #define FC_CMD_PLOGO		3
120 #define FC_SNS_RCV		4
121 #define FC_TRANS_ERR		5
122 #define FC_DATA_OVRRUN		6
123 #define FC_DATA_UNDRUN		7
124 #define FC_ERROR		8
125 #define FC_HRD_ERROR		9
126 #define FC_CRC_ERROR		10
127 #define FC_TIMED_OUT		11
128 
129 /*
130  * Error recovery timeout values.
131  */
132 #define FC_SCSI_TM_TOV		(10 * HZ)
133 #define FC_HOST_RESET_TIMEOUT	(30 * HZ)
134 #define FC_CAN_QUEUE_PERIOD	(60 * HZ)
135 
136 #define FC_MAX_ERROR_CNT	5
137 #define FC_MAX_RECOV_RETRY	3
138 
139 #define FC_FCP_DFLT_QUEUE_DEPTH 32
140 
141 /**
142  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
143  * @lport: The local port that the FCP packet is for
144  * @gfp:   GFP flags for allocation
145  *
146  * Return value: fcp_pkt structure or null on allocation failure.
147  * Context:	 Can be called from process context, no lock is required.
148  */
149 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
150 {
151 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
152 	struct fc_fcp_pkt *fsp;
153 
154 	fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
155 	if (fsp) {
156 		memset(fsp, 0, sizeof(*fsp));
157 		fsp->lp = lport;
158 		fsp->xfer_ddp = FC_XID_UNKNOWN;
159 		atomic_set(&fsp->ref_cnt, 1);
160 		init_timer(&fsp->timer);
161 		INIT_LIST_HEAD(&fsp->list);
162 		spin_lock_init(&fsp->scsi_pkt_lock);
163 	}
164 	return fsp;
165 }
166 
167 /**
168  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
169  * @fsp: The FCP packet to be released
170  *
171  * Context: Can be called from process or interrupt context,
172  *	    no lock is required.
173  */
174 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
175 {
176 	if (atomic_dec_and_test(&fsp->ref_cnt)) {
177 		struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
178 
179 		mempool_free(fsp, si->scsi_pkt_pool);
180 	}
181 }
182 
183 /**
184  * fc_fcp_pkt_hold() - Hold a fcp_pkt
185  * @fsp: The FCP packet to be held
186  */
187 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
188 {
189 	atomic_inc(&fsp->ref_cnt);
190 }
191 
192 /**
193  * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
194  * @seq: The sequence that the FCP packet is on (required by destructor API)
195  * @fsp: The FCP packet to be released
196  *
197  * This routine is called by a destructor callback in the exch_seq_send()
198  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
199  * argument even though it is not used by this routine.
200  *
201  * Context: No locking required.
202  */
203 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
204 {
205 	fc_fcp_pkt_release(fsp);
206 }
207 
208 /**
209  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
210  * @fsp: The FCP packet to be locked and incremented
211  *
212  * We should only return error if we return a command to SCSI-ml before
213  * getting a response. This can happen in cases where we send a abort, but
214  * do not wait for the response and the abort and command can be passing
215  * each other on the wire/network-layer.
216  *
217  * Note: this function locks the packet and gets a reference to allow
218  * callers to call the completion function while the lock is held and
219  * not have to worry about the packets refcount.
220  *
221  * TODO: Maybe we should just have callers grab/release the lock and
222  * have a function that they call to verify the fsp and grab a ref if
223  * needed.
224  */
225 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
226 {
227 	spin_lock_bh(&fsp->scsi_pkt_lock);
228 	if (fsp->state & FC_SRB_COMPL) {
229 		spin_unlock_bh(&fsp->scsi_pkt_lock);
230 		return -EPERM;
231 	}
232 
233 	fc_fcp_pkt_hold(fsp);
234 	return 0;
235 }
236 
237 /**
238  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
239  *			 reference count
240  * @fsp: The FCP packet to be unlocked and decremented
241  */
242 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
243 {
244 	spin_unlock_bh(&fsp->scsi_pkt_lock);
245 	fc_fcp_pkt_release(fsp);
246 }
247 
248 /**
249  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
250  * @fsp:   The FCP packet to start a timer for
251  * @delay: The timeout period for the timer
252  */
253 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
254 {
255 	if (!(fsp->state & FC_SRB_COMPL))
256 		mod_timer(&fsp->timer, jiffies + delay);
257 }
258 
259 /**
260  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
261  *			 fcp_pkt
262  * @fsp: The FCP packet to abort exchanges on
263  */
264 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
265 {
266 	if (!fsp->seq_ptr)
267 		return -EINVAL;
268 
269 	fsp->state |= FC_SRB_ABORT_PENDING;
270 	return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
271 }
272 
273 /**
274  * fc_fcp_retry_cmd() - Retry a fcp_pkt
275  * @fsp: The FCP packet to be retried
276  *
277  * Sets the status code to be FC_ERROR and then calls
278  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
279  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
280  * The SCSI-ml will retry the command.
281  */
282 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
283 {
284 	if (fsp->seq_ptr) {
285 		fsp->lp->tt.exch_done(fsp->seq_ptr);
286 		fsp->seq_ptr = NULL;
287 	}
288 
289 	fsp->state &= ~FC_SRB_ABORT_PENDING;
290 	fsp->io_status = 0;
291 	fsp->status_code = FC_ERROR;
292 	fc_fcp_complete_locked(fsp);
293 }
294 
295 /**
296  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
297  * @fsp: The FCP packet that will manage the DDP frames
298  * @xid: The XID that will be used for the DDP exchange
299  */
300 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
301 {
302 	struct fc_lport *lport;
303 
304 	lport = fsp->lp;
305 	if ((fsp->req_flags & FC_SRB_READ) &&
306 	    (lport->lro_enabled) && (lport->tt.ddp_setup)) {
307 		if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
308 					scsi_sg_count(fsp->cmd)))
309 			fsp->xfer_ddp = xid;
310 	}
311 }
312 
313 /**
314  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
315  *		       DDP related resources for a fcp_pkt
316  * @fsp: The FCP packet that DDP had been used on
317  */
318 static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
319 {
320 	struct fc_lport *lport;
321 
322 	if (!fsp)
323 		return;
324 
325 	if (fsp->xfer_ddp == FC_XID_UNKNOWN)
326 		return;
327 
328 	lport = fsp->lp;
329 	if (lport->tt.ddp_done) {
330 		fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
331 		fsp->xfer_ddp = FC_XID_UNKNOWN;
332 	}
333 }
334 
335 /**
336  * fc_fcp_can_queue_ramp_up() - increases can_queue
337  * @lport: lport to ramp up can_queue
338  *
339  * Locking notes: Called with Scsi_Host lock held
340  */
341 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
342 {
343 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
344 	int can_queue;
345 
346 	if (si->last_can_queue_ramp_up_time &&
347 	    (time_before(jiffies, si->last_can_queue_ramp_up_time +
348 			 FC_CAN_QUEUE_PERIOD)))
349 		return;
350 
351 	if (time_before(jiffies, si->last_can_queue_ramp_down_time +
352 			FC_CAN_QUEUE_PERIOD))
353 		return;
354 
355 	si->last_can_queue_ramp_up_time = jiffies;
356 
357 	can_queue = lport->host->can_queue << 1;
358 	if (can_queue >= si->max_can_queue) {
359 		can_queue = si->max_can_queue;
360 		si->last_can_queue_ramp_down_time = 0;
361 	}
362 	lport->host->can_queue = can_queue;
363 	shost_printk(KERN_ERR, lport->host, "libfc: increased "
364 		     "can_queue to %d.\n", can_queue);
365 }
366 
367 /**
368  * fc_fcp_can_queue_ramp_down() - reduces can_queue
369  * @lport: lport to reduce can_queue
370  *
371  * If we are getting memory allocation failures, then we may
372  * be trying to execute too many commands. We let the running
373  * commands complete or timeout, then try again with a reduced
374  * can_queue. Eventually we will hit the point where we run
375  * on all reserved structs.
376  *
377  * Locking notes: Called with Scsi_Host lock held
378  */
379 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
380 {
381 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
382 	int can_queue;
383 
384 	if (si->last_can_queue_ramp_down_time &&
385 	    (time_before(jiffies, si->last_can_queue_ramp_down_time +
386 			 FC_CAN_QUEUE_PERIOD)))
387 		return;
388 
389 	si->last_can_queue_ramp_down_time = jiffies;
390 
391 	can_queue = lport->host->can_queue;
392 	can_queue >>= 1;
393 	if (!can_queue)
394 		can_queue = 1;
395 	lport->host->can_queue = can_queue;
396 	shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
397 		     "Reducing can_queue to %d.\n", can_queue);
398 }
399 
400 /*
401  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
402  * @lport:	fc lport struct
403  * @len:	payload length
404  *
405  * Allocates fc_frame structure and buffer but if fails to allocate
406  * then reduce can_queue.
407  */
408 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
409 						  size_t len)
410 {
411 	struct fc_frame *fp;
412 	unsigned long flags;
413 
414 	fp = fc_frame_alloc(lport, len);
415 	if (likely(fp))
416 		return fp;
417 
418 	/* error case */
419 	spin_lock_irqsave(lport->host->host_lock, flags);
420 	fc_fcp_can_queue_ramp_down(lport);
421 	spin_unlock_irqrestore(lport->host->host_lock, flags);
422 	return NULL;
423 }
424 
425 /**
426  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
427  * @fsp: The FCP packet the data is on
428  * @fp:	 The data frame
429  */
430 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
431 {
432 	struct scsi_cmnd *sc = fsp->cmd;
433 	struct fc_lport *lport = fsp->lp;
434 	struct fcoe_dev_stats *stats;
435 	struct fc_frame_header *fh;
436 	size_t start_offset;
437 	size_t offset;
438 	u32 crc;
439 	u32 copy_len = 0;
440 	size_t len;
441 	void *buf;
442 	struct scatterlist *sg;
443 	u32 nents;
444 	u8 host_bcode = FC_COMPLETE;
445 
446 	fh = fc_frame_header_get(fp);
447 	offset = ntohl(fh->fh_parm_offset);
448 	start_offset = offset;
449 	len = fr_len(fp) - sizeof(*fh);
450 	buf = fc_frame_payload_get(fp, 0);
451 
452 	/*
453 	 * if this I/O is ddped then clear it and initiate recovery since data
454 	 * frames are expected to be placed directly in that case.
455 	 *
456 	 * Indicate error to scsi-ml because something went wrong with the
457 	 * ddp handling to get us here.
458 	 */
459 	if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
460 		fc_fcp_ddp_done(fsp);
461 		FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
462 		host_bcode = FC_ERROR;
463 		goto err;
464 	}
465 	if (offset + len > fsp->data_len) {
466 		/* this should never happen */
467 		if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
468 		    fc_frame_crc_check(fp))
469 			goto crc_err;
470 		FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
471 			   "data_len %x\n", len, offset, fsp->data_len);
472 
473 		/* Data is corrupted indicate scsi-ml should retry */
474 		host_bcode = FC_DATA_OVRRUN;
475 		goto err;
476 	}
477 	if (offset != fsp->xfer_len)
478 		fsp->state |= FC_SRB_DISCONTIG;
479 
480 	sg = scsi_sglist(sc);
481 	nents = scsi_sg_count(sc);
482 
483 	if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
484 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
485 						    &offset, KM_SOFTIRQ0, NULL);
486 	} else {
487 		crc = crc32(~0, (u8 *) fh, sizeof(*fh));
488 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
489 						    &offset, KM_SOFTIRQ0, &crc);
490 		buf = fc_frame_payload_get(fp, 0);
491 		if (len % 4)
492 			crc = crc32(crc, buf + len, 4 - (len % 4));
493 
494 		if (~crc != le32_to_cpu(fr_crc(fp))) {
495 crc_err:
496 			stats = per_cpu_ptr(lport->dev_stats, get_cpu());
497 			stats->ErrorFrames++;
498 			/* per cpu count, not total count, but OK for limit */
499 			if (stats->InvalidCRCCount++ < 5)
500 				printk(KERN_WARNING "libfc: CRC error on data "
501 				       "frame for port (%6.6x)\n",
502 				       lport->port_id);
503 			put_cpu();
504 			/*
505 			 * Assume the frame is total garbage.
506 			 * We may have copied it over the good part
507 			 * of the buffer.
508 			 * If so, we need to retry the entire operation.
509 			 * Otherwise, ignore it.
510 			 */
511 			if (fsp->state & FC_SRB_DISCONTIG) {
512 				host_bcode = FC_CRC_ERROR;
513 				goto err;
514 			}
515 			return;
516 		}
517 	}
518 
519 	if (fsp->xfer_contig_end == start_offset)
520 		fsp->xfer_contig_end += copy_len;
521 	fsp->xfer_len += copy_len;
522 
523 	/*
524 	 * In the very rare event that this data arrived after the response
525 	 * and completes the transfer, call the completion handler.
526 	 */
527 	if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
528 	    fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
529 		fc_fcp_complete_locked(fsp);
530 	return;
531 err:
532 	fc_fcp_recovery(fsp, host_bcode);
533 }
534 
535 /**
536  * fc_fcp_send_data() - Send SCSI data to a target
537  * @fsp:      The FCP packet the data is on
538  * @sp:	      The sequence the data is to be sent on
539  * @offset:   The starting offset for this data request
540  * @seq_blen: The burst length for this data request
541  *
542  * Called after receiving a Transfer Ready data descriptor.
543  * If the LLD is capable of sequence offload then send down the
544  * seq_blen amount of data in single frame, otherwise send
545  * multiple frames of the maximum frame payload supported by
546  * the target port.
547  */
548 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
549 			    size_t offset, size_t seq_blen)
550 {
551 	struct fc_exch *ep;
552 	struct scsi_cmnd *sc;
553 	struct scatterlist *sg;
554 	struct fc_frame *fp = NULL;
555 	struct fc_lport *lport = fsp->lp;
556 	struct page *page;
557 	size_t remaining;
558 	size_t t_blen;
559 	size_t tlen;
560 	size_t sg_bytes;
561 	size_t frame_offset, fh_parm_offset;
562 	size_t off;
563 	int error;
564 	void *data = NULL;
565 	void *page_addr;
566 	int using_sg = lport->sg_supp;
567 	u32 f_ctl;
568 
569 	WARN_ON(seq_blen <= 0);
570 	if (unlikely(offset + seq_blen > fsp->data_len)) {
571 		/* this should never happen */
572 		FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
573 			   "offset %zx\n", seq_blen, offset);
574 		fc_fcp_send_abort(fsp);
575 		return 0;
576 	} else if (offset != fsp->xfer_len) {
577 		/* Out of Order Data Request - no problem, but unexpected. */
578 		FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
579 			   "seq_blen %zx offset %zx\n", seq_blen, offset);
580 	}
581 
582 	/*
583 	 * if LLD is capable of seq_offload then set transport
584 	 * burst length (t_blen) to seq_blen, otherwise set t_blen
585 	 * to max FC frame payload previously set in fsp->max_payload.
586 	 */
587 	t_blen = fsp->max_payload;
588 	if (lport->seq_offload) {
589 		t_blen = min(seq_blen, (size_t)lport->lso_max);
590 		FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
591 			   fsp, seq_blen, lport->lso_max, t_blen);
592 	}
593 
594 	if (t_blen > 512)
595 		t_blen &= ~(512 - 1);	/* round down to block size */
596 	sc = fsp->cmd;
597 
598 	remaining = seq_blen;
599 	fh_parm_offset = frame_offset = offset;
600 	tlen = 0;
601 	seq = lport->tt.seq_start_next(seq);
602 	f_ctl = FC_FC_REL_OFF;
603 	WARN_ON(!seq);
604 
605 	sg = scsi_sglist(sc);
606 
607 	while (remaining > 0 && sg) {
608 		if (offset >= sg->length) {
609 			offset -= sg->length;
610 			sg = sg_next(sg);
611 			continue;
612 		}
613 		if (!fp) {
614 			tlen = min(t_blen, remaining);
615 
616 			/*
617 			 * TODO.  Temporary workaround.	 fc_seq_send() can't
618 			 * handle odd lengths in non-linear skbs.
619 			 * This will be the final fragment only.
620 			 */
621 			if (tlen % 4)
622 				using_sg = 0;
623 			fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
624 			if (!fp)
625 				return -ENOMEM;
626 
627 			data = fc_frame_header_get(fp) + 1;
628 			fh_parm_offset = frame_offset;
629 			fr_max_payload(fp) = fsp->max_payload;
630 		}
631 
632 		off = offset + sg->offset;
633 		sg_bytes = min(tlen, sg->length - offset);
634 		sg_bytes = min(sg_bytes,
635 			       (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
636 		page = sg_page(sg) + (off >> PAGE_SHIFT);
637 		if (using_sg) {
638 			get_page(page);
639 			skb_fill_page_desc(fp_skb(fp),
640 					   skb_shinfo(fp_skb(fp))->nr_frags,
641 					   page, off & ~PAGE_MASK, sg_bytes);
642 			fp_skb(fp)->data_len += sg_bytes;
643 			fr_len(fp) += sg_bytes;
644 			fp_skb(fp)->truesize += PAGE_SIZE;
645 		} else {
646 			/*
647 			 * The scatterlist item may be bigger than PAGE_SIZE,
648 			 * but we must not cross pages inside the kmap.
649 			 */
650 			page_addr = kmap_atomic(page, KM_SOFTIRQ0);
651 			memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
652 			       sg_bytes);
653 			kunmap_atomic(page_addr, KM_SOFTIRQ0);
654 			data += sg_bytes;
655 		}
656 		offset += sg_bytes;
657 		frame_offset += sg_bytes;
658 		tlen -= sg_bytes;
659 		remaining -= sg_bytes;
660 
661 		if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
662 		    (tlen))
663 			continue;
664 
665 		/*
666 		 * Send sequence with transfer sequence initiative in case
667 		 * this is last FCP frame of the sequence.
668 		 */
669 		if (remaining == 0)
670 			f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
671 
672 		ep = fc_seq_exch(seq);
673 		fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
674 			       FC_TYPE_FCP, f_ctl, fh_parm_offset);
675 
676 		/*
677 		 * send fragment using for a sequence.
678 		 */
679 		error = lport->tt.seq_send(lport, seq, fp);
680 		if (error) {
681 			WARN_ON(1);		/* send error should be rare */
682 			fc_fcp_retry_cmd(fsp);
683 			return 0;
684 		}
685 		fp = NULL;
686 	}
687 	fsp->xfer_len += seq_blen;	/* premature count? */
688 	return 0;
689 }
690 
691 /**
692  * fc_fcp_abts_resp() - Send an ABTS response
693  * @fsp: The FCP packet that is being aborted
694  * @fp:	 The response frame
695  */
696 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
697 {
698 	int ba_done = 1;
699 	struct fc_ba_rjt *brp;
700 	struct fc_frame_header *fh;
701 
702 	fh = fc_frame_header_get(fp);
703 	switch (fh->fh_r_ctl) {
704 	case FC_RCTL_BA_ACC:
705 		break;
706 	case FC_RCTL_BA_RJT:
707 		brp = fc_frame_payload_get(fp, sizeof(*brp));
708 		if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
709 			break;
710 		/* fall thru */
711 	default:
712 		/*
713 		 * we will let the command timeout
714 		 * and scsi-ml recover in this case,
715 		 * therefore cleared the ba_done flag.
716 		 */
717 		ba_done = 0;
718 	}
719 
720 	if (ba_done) {
721 		fsp->state |= FC_SRB_ABORTED;
722 		fsp->state &= ~FC_SRB_ABORT_PENDING;
723 
724 		if (fsp->wait_for_comp)
725 			complete(&fsp->tm_done);
726 		else
727 			fc_fcp_complete_locked(fsp);
728 	}
729 }
730 
731 /**
732  * fc_fcp_recv() - Reveive an FCP frame
733  * @seq: The sequence the frame is on
734  * @fp:	 The received frame
735  * @arg: The related FCP packet
736  *
737  * Context: Called from Soft IRQ context. Can not be called
738  *	    holding the FCP packet list lock.
739  */
740 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
741 {
742 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
743 	struct fc_lport *lport = fsp->lp;
744 	struct fc_frame_header *fh;
745 	struct fcp_txrdy *dd;
746 	u8 r_ctl;
747 	int rc = 0;
748 
749 	if (IS_ERR(fp)) {
750 		fc_fcp_error(fsp, fp);
751 		return;
752 	}
753 
754 	fh = fc_frame_header_get(fp);
755 	r_ctl = fh->fh_r_ctl;
756 
757 	if (lport->state != LPORT_ST_READY)
758 		goto out;
759 	if (fc_fcp_lock_pkt(fsp))
760 		goto out;
761 	fsp->last_pkt_time = jiffies;
762 
763 	if (fh->fh_type == FC_TYPE_BLS) {
764 		fc_fcp_abts_resp(fsp, fp);
765 		goto unlock;
766 	}
767 
768 	if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
769 		goto unlock;
770 
771 	if (r_ctl == FC_RCTL_DD_DATA_DESC) {
772 		/*
773 		 * received XFER RDY from the target
774 		 * need to send data to the target
775 		 */
776 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
777 		dd = fc_frame_payload_get(fp, sizeof(*dd));
778 		WARN_ON(!dd);
779 
780 		rc = fc_fcp_send_data(fsp, seq,
781 				      (size_t) ntohl(dd->ft_data_ro),
782 				      (size_t) ntohl(dd->ft_burst_len));
783 		if (!rc)
784 			seq->rec_data = fsp->xfer_len;
785 	} else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
786 		/*
787 		 * received a DATA frame
788 		 * next we will copy the data to the system buffer
789 		 */
790 		WARN_ON(fr_len(fp) < sizeof(*fh));	/* len may be 0 */
791 		fc_fcp_recv_data(fsp, fp);
792 		seq->rec_data = fsp->xfer_contig_end;
793 	} else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
794 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
795 
796 		fc_fcp_resp(fsp, fp);
797 	} else {
798 		FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
799 	}
800 unlock:
801 	fc_fcp_unlock_pkt(fsp);
802 out:
803 	fc_frame_free(fp);
804 }
805 
806 /**
807  * fc_fcp_resp() - Handler for FCP responses
808  * @fsp: The FCP packet the response is for
809  * @fp:	 The response frame
810  */
811 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
812 {
813 	struct fc_frame_header *fh;
814 	struct fcp_resp *fc_rp;
815 	struct fcp_resp_ext *rp_ex;
816 	struct fcp_resp_rsp_info *fc_rp_info;
817 	u32 plen;
818 	u32 expected_len;
819 	u32 respl = 0;
820 	u32 snsl = 0;
821 	u8 flags = 0;
822 
823 	plen = fr_len(fp);
824 	fh = (struct fc_frame_header *)fr_hdr(fp);
825 	if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
826 		goto len_err;
827 	plen -= sizeof(*fh);
828 	fc_rp = (struct fcp_resp *)(fh + 1);
829 	fsp->cdb_status = fc_rp->fr_status;
830 	flags = fc_rp->fr_flags;
831 	fsp->scsi_comp_flags = flags;
832 	expected_len = fsp->data_len;
833 
834 	/* if ddp, update xfer len */
835 	fc_fcp_ddp_done(fsp);
836 
837 	if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
838 		rp_ex = (void *)(fc_rp + 1);
839 		if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
840 			if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
841 				goto len_err;
842 			fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
843 			if (flags & FCP_RSP_LEN_VAL) {
844 				respl = ntohl(rp_ex->fr_rsp_len);
845 				if (respl != sizeof(*fc_rp_info))
846 					goto len_err;
847 				if (fsp->wait_for_comp) {
848 					/* Abuse cdb_status for rsp code */
849 					fsp->cdb_status = fc_rp_info->rsp_code;
850 					complete(&fsp->tm_done);
851 					/*
852 					 * tmfs will not have any scsi cmd so
853 					 * exit here
854 					 */
855 					return;
856 				}
857 			}
858 			if (flags & FCP_SNS_LEN_VAL) {
859 				snsl = ntohl(rp_ex->fr_sns_len);
860 				if (snsl > SCSI_SENSE_BUFFERSIZE)
861 					snsl = SCSI_SENSE_BUFFERSIZE;
862 				memcpy(fsp->cmd->sense_buffer,
863 				       (char *)fc_rp_info + respl, snsl);
864 			}
865 		}
866 		if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
867 			if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
868 				goto len_err;
869 			if (flags & FCP_RESID_UNDER) {
870 				fsp->scsi_resid = ntohl(rp_ex->fr_resid);
871 				/*
872 				 * The cmnd->underflow is the minimum number of
873 				 * bytes that must be transfered for this
874 				 * command.  Provided a sense condition is not
875 				 * present, make sure the actual amount
876 				 * transferred is at least the underflow value
877 				 * or fail.
878 				 */
879 				if (!(flags & FCP_SNS_LEN_VAL) &&
880 				    (fc_rp->fr_status == 0) &&
881 				    (scsi_bufflen(fsp->cmd) -
882 				     fsp->scsi_resid) < fsp->cmd->underflow)
883 					goto err;
884 				expected_len -= fsp->scsi_resid;
885 			} else {
886 				fsp->status_code = FC_ERROR;
887 			}
888 		}
889 	}
890 	fsp->state |= FC_SRB_RCV_STATUS;
891 
892 	/*
893 	 * Check for missing or extra data frames.
894 	 */
895 	if (unlikely(fsp->xfer_len != expected_len)) {
896 		if (fsp->xfer_len < expected_len) {
897 			/*
898 			 * Some data may be queued locally,
899 			 * Wait a at least one jiffy to see if it is delivered.
900 			 * If this expires without data, we may do SRR.
901 			 */
902 			fc_fcp_timer_set(fsp, 2);
903 			return;
904 		}
905 		fsp->status_code = FC_DATA_OVRRUN;
906 		FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
907 			   "len %x, data len %x\n",
908 			   fsp->rport->port_id,
909 			   fsp->xfer_len, expected_len, fsp->data_len);
910 	}
911 	fc_fcp_complete_locked(fsp);
912 	return;
913 
914 len_err:
915 	FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
916 		   "snsl %u\n", flags, fr_len(fp), respl, snsl);
917 err:
918 	fsp->status_code = FC_ERROR;
919 	fc_fcp_complete_locked(fsp);
920 }
921 
922 /**
923  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
924  *			      fcp_pkt lock held
925  * @fsp: The FCP packet to be completed
926  *
927  * This function may sleep if a timer is pending. The packet lock must be
928  * held, and the host lock must not be held.
929  */
930 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
931 {
932 	struct fc_lport *lport = fsp->lp;
933 	struct fc_seq *seq;
934 	struct fc_exch *ep;
935 	u32 f_ctl;
936 
937 	if (fsp->state & FC_SRB_ABORT_PENDING)
938 		return;
939 
940 	if (fsp->state & FC_SRB_ABORTED) {
941 		if (!fsp->status_code)
942 			fsp->status_code = FC_CMD_ABORTED;
943 	} else {
944 		/*
945 		 * Test for transport underrun, independent of response
946 		 * underrun status.
947 		 */
948 		if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
949 		    (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
950 		     fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
951 			fsp->status_code = FC_DATA_UNDRUN;
952 			fsp->io_status = 0;
953 		}
954 	}
955 
956 	seq = fsp->seq_ptr;
957 	if (seq) {
958 		fsp->seq_ptr = NULL;
959 		if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
960 			struct fc_frame *conf_frame;
961 			struct fc_seq *csp;
962 
963 			csp = lport->tt.seq_start_next(seq);
964 			conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
965 			if (conf_frame) {
966 				f_ctl = FC_FC_SEQ_INIT;
967 				f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
968 				ep = fc_seq_exch(seq);
969 				fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
970 					       ep->did, ep->sid,
971 					       FC_TYPE_FCP, f_ctl, 0);
972 				lport->tt.seq_send(lport, csp, conf_frame);
973 			}
974 		}
975 		lport->tt.exch_done(seq);
976 	}
977 	/*
978 	 * Some resets driven by SCSI are not I/Os and do not have
979 	 * SCSI commands associated with the requests. We should not
980 	 * call I/O completion if we do not have a SCSI command.
981 	 */
982 	if (fsp->cmd)
983 		fc_io_compl(fsp);
984 }
985 
986 /**
987  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
988  * @fsp:   The FCP packet whose exchanges should be canceled
989  * @error: The reason for the cancellation
990  */
991 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
992 {
993 	struct fc_lport *lport = fsp->lp;
994 
995 	if (fsp->seq_ptr) {
996 		lport->tt.exch_done(fsp->seq_ptr);
997 		fsp->seq_ptr = NULL;
998 	}
999 	fsp->status_code = error;
1000 }
1001 
1002 /**
1003  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1004  * @lport: The local port whose exchanges should be canceled
1005  * @id:	   The target's ID
1006  * @lun:   The LUN
1007  * @error: The reason for cancellation
1008  *
1009  * If lun or id is -1, they are ignored.
1010  */
1011 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1012 				    unsigned int lun, int error)
1013 {
1014 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1015 	struct fc_fcp_pkt *fsp;
1016 	struct scsi_cmnd *sc_cmd;
1017 	unsigned long flags;
1018 
1019 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1020 restart:
1021 	list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1022 		sc_cmd = fsp->cmd;
1023 		if (id != -1 && scmd_id(sc_cmd) != id)
1024 			continue;
1025 
1026 		if (lun != -1 && sc_cmd->device->lun != lun)
1027 			continue;
1028 
1029 		fc_fcp_pkt_hold(fsp);
1030 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1031 
1032 		if (!fc_fcp_lock_pkt(fsp)) {
1033 			fc_fcp_cleanup_cmd(fsp, error);
1034 			fc_io_compl(fsp);
1035 			fc_fcp_unlock_pkt(fsp);
1036 		}
1037 
1038 		fc_fcp_pkt_release(fsp);
1039 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1040 		/*
1041 		 * while we dropped the lock multiple pkts could
1042 		 * have been released, so we have to start over.
1043 		 */
1044 		goto restart;
1045 	}
1046 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1047 }
1048 
1049 /**
1050  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1051  * @lport: The local port whose exchanges are to be aborted
1052  */
1053 static void fc_fcp_abort_io(struct fc_lport *lport)
1054 {
1055 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1056 }
1057 
1058 /**
1059  * fc_fcp_pkt_send() - Send a fcp_pkt
1060  * @lport: The local port to send the FCP packet on
1061  * @fsp:   The FCP packet to send
1062  *
1063  * Return:  Zero for success and -1 for failure
1064  * Locks:   Called without locks held
1065  */
1066 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1067 {
1068 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1069 	unsigned long flags;
1070 	int rc;
1071 
1072 	fsp->cmd->SCp.ptr = (char *)fsp;
1073 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1074 	fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1075 
1076 	int_to_scsilun(fsp->cmd->device->lun,
1077 		       (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1078 	memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1079 
1080 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1081 	list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1082 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1083 	rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1084 	if (unlikely(rc)) {
1085 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1086 		list_del(&fsp->list);
1087 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1088 	}
1089 
1090 	return rc;
1091 }
1092 
1093 /**
1094  * get_fsp_rec_tov() - Helper function to get REC_TOV
1095  * @fsp: the FCP packet
1096  */
1097 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
1098 {
1099 	struct fc_rport *rport;
1100 	struct fc_rport_libfc_priv *rpriv;
1101 
1102 	rport = fsp->rport;
1103 	rpriv = rport->dd_data;
1104 
1105 	return rpriv->e_d_tov + REC_TOV_CONST;
1106 }
1107 
1108 /**
1109  * fc_fcp_cmd_send() - Send a FCP command
1110  * @lport: The local port to send the command on
1111  * @fsp:   The FCP packet the command is on
1112  * @resp:  The handler for the response
1113  */
1114 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1115 			   void (*resp)(struct fc_seq *,
1116 					struct fc_frame *fp,
1117 					void *arg))
1118 {
1119 	struct fc_frame *fp;
1120 	struct fc_seq *seq;
1121 	struct fc_rport *rport;
1122 	struct fc_rport_libfc_priv *rpriv;
1123 	const size_t len = sizeof(fsp->cdb_cmd);
1124 	int rc = 0;
1125 	unsigned int rec_tov;
1126 
1127 	if (fc_fcp_lock_pkt(fsp))
1128 		return 0;
1129 
1130 	fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1131 	if (!fp) {
1132 		rc = -1;
1133 		goto unlock;
1134 	}
1135 
1136 	memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1137 	fr_fsp(fp) = fsp;
1138 	rport = fsp->rport;
1139 	fsp->max_payload = rport->maxframe_size;
1140 	rpriv = rport->dd_data;
1141 
1142 	fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1143 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1144 		       FC_FCTL_REQ, 0);
1145 
1146 	seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1147 				      fsp, 0);
1148 	if (!seq) {
1149 		rc = -1;
1150 		goto unlock;
1151 	}
1152 	fsp->last_pkt_time = jiffies;
1153 	fsp->seq_ptr = seq;
1154 	fc_fcp_pkt_hold(fsp);	/* hold for fc_fcp_pkt_destroy */
1155 
1156 	rec_tov = get_fsp_rec_tov(fsp);
1157 
1158 	setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1159 
1160 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1161 		fc_fcp_timer_set(fsp, rec_tov);
1162 
1163 unlock:
1164 	fc_fcp_unlock_pkt(fsp);
1165 	return rc;
1166 }
1167 
1168 /**
1169  * fc_fcp_error() - Handler for FCP layer errors
1170  * @fsp: The FCP packet the error is on
1171  * @fp:	 The frame that has errored
1172  */
1173 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1174 {
1175 	int error = PTR_ERR(fp);
1176 
1177 	if (fc_fcp_lock_pkt(fsp))
1178 		return;
1179 
1180 	if (error == -FC_EX_CLOSED) {
1181 		fc_fcp_retry_cmd(fsp);
1182 		goto unlock;
1183 	}
1184 
1185 	/*
1186 	 * clear abort pending, because the lower layer
1187 	 * decided to force completion.
1188 	 */
1189 	fsp->state &= ~FC_SRB_ABORT_PENDING;
1190 	fsp->status_code = FC_CMD_PLOGO;
1191 	fc_fcp_complete_locked(fsp);
1192 unlock:
1193 	fc_fcp_unlock_pkt(fsp);
1194 }
1195 
1196 /**
1197  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1198  * @fsp:   The FCP packet to abort on
1199  *
1200  * Called to send an abort and then wait for abort completion
1201  */
1202 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1203 {
1204 	int rc = FAILED;
1205 	unsigned long ticks_left;
1206 
1207 	if (fc_fcp_send_abort(fsp))
1208 		return FAILED;
1209 
1210 	init_completion(&fsp->tm_done);
1211 	fsp->wait_for_comp = 1;
1212 
1213 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1214 	ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1215 							FC_SCSI_TM_TOV);
1216 	spin_lock_bh(&fsp->scsi_pkt_lock);
1217 	fsp->wait_for_comp = 0;
1218 
1219 	if (!ticks_left) {
1220 		FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1221 	} else if (fsp->state & FC_SRB_ABORTED) {
1222 		FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1223 		rc = SUCCESS;
1224 		fc_fcp_complete_locked(fsp);
1225 	}
1226 
1227 	return rc;
1228 }
1229 
1230 /**
1231  * fc_lun_reset_send() - Send LUN reset command
1232  * @data: The FCP packet that identifies the LUN to be reset
1233  */
1234 static void fc_lun_reset_send(unsigned long data)
1235 {
1236 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1237 	struct fc_lport *lport = fsp->lp;
1238 	unsigned int rec_tov;
1239 
1240 	if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1241 		if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1242 			return;
1243 		if (fc_fcp_lock_pkt(fsp))
1244 			return;
1245 		rec_tov = get_fsp_rec_tov(fsp);
1246 		setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1247 		fc_fcp_timer_set(fsp, rec_tov);
1248 		fc_fcp_unlock_pkt(fsp);
1249 	}
1250 }
1251 
1252 /**
1253  * fc_lun_reset() - Send a LUN RESET command to a device
1254  *		    and wait for the reply
1255  * @lport: The local port to sent the command on
1256  * @fsp:   The FCP packet that identifies the LUN to be reset
1257  * @id:	   The SCSI command ID
1258  * @lun:   The LUN ID to be reset
1259  */
1260 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1261 			unsigned int id, unsigned int lun)
1262 {
1263 	int rc;
1264 
1265 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1266 	fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1267 	int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1268 
1269 	fsp->wait_for_comp = 1;
1270 	init_completion(&fsp->tm_done);
1271 
1272 	fc_lun_reset_send((unsigned long)fsp);
1273 
1274 	/*
1275 	 * wait for completion of reset
1276 	 * after that make sure all commands are terminated
1277 	 */
1278 	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1279 
1280 	spin_lock_bh(&fsp->scsi_pkt_lock);
1281 	fsp->state |= FC_SRB_COMPL;
1282 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1283 
1284 	del_timer_sync(&fsp->timer);
1285 
1286 	spin_lock_bh(&fsp->scsi_pkt_lock);
1287 	if (fsp->seq_ptr) {
1288 		lport->tt.exch_done(fsp->seq_ptr);
1289 		fsp->seq_ptr = NULL;
1290 	}
1291 	fsp->wait_for_comp = 0;
1292 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1293 
1294 	if (!rc) {
1295 		FC_SCSI_DBG(lport, "lun reset failed\n");
1296 		return FAILED;
1297 	}
1298 
1299 	/* cdb_status holds the tmf's rsp code */
1300 	if (fsp->cdb_status != FCP_TMF_CMPL)
1301 		return FAILED;
1302 
1303 	FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1304 	fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1305 	return SUCCESS;
1306 }
1307 
1308 /**
1309  * fc_tm_done() - Task Managment response handler
1310  * @seq: The sequence that the response is on
1311  * @fp:	 The response frame
1312  * @arg: The FCP packet the response is for
1313  */
1314 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1315 {
1316 	struct fc_fcp_pkt *fsp = arg;
1317 	struct fc_frame_header *fh;
1318 
1319 	if (IS_ERR(fp)) {
1320 		/*
1321 		 * If there is an error just let it timeout or wait
1322 		 * for TMF to be aborted if it timedout.
1323 		 *
1324 		 * scsi-eh will escalate for when either happens.
1325 		 */
1326 		return;
1327 	}
1328 
1329 	if (fc_fcp_lock_pkt(fsp))
1330 		goto out;
1331 
1332 	/*
1333 	 * raced with eh timeout handler.
1334 	 */
1335 	if (!fsp->seq_ptr || !fsp->wait_for_comp)
1336 		goto out_unlock;
1337 
1338 	fh = fc_frame_header_get(fp);
1339 	if (fh->fh_type != FC_TYPE_BLS)
1340 		fc_fcp_resp(fsp, fp);
1341 	fsp->seq_ptr = NULL;
1342 	fsp->lp->tt.exch_done(seq);
1343 out_unlock:
1344 	fc_fcp_unlock_pkt(fsp);
1345 out:
1346 	fc_frame_free(fp);
1347 }
1348 
1349 /**
1350  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1351  * @lport: The local port to be cleaned up
1352  */
1353 static void fc_fcp_cleanup(struct fc_lport *lport)
1354 {
1355 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1356 }
1357 
1358 /**
1359  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1360  * @data: The FCP packet that has timed out
1361  *
1362  * If REC is supported then just issue it and return. The REC exchange will
1363  * complete or time out and recovery can continue at that point. Otherwise,
1364  * if the response has been received without all the data it has been
1365  * ER_TIMEOUT since the response was received. If the response has not been
1366  * received we see if data was received recently. If it has been then we
1367  * continue waiting, otherwise, we abort the command.
1368  */
1369 static void fc_fcp_timeout(unsigned long data)
1370 {
1371 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1372 	struct fc_rport *rport = fsp->rport;
1373 	struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1374 
1375 	if (fc_fcp_lock_pkt(fsp))
1376 		return;
1377 
1378 	if (fsp->cdb_cmd.fc_tm_flags)
1379 		goto unlock;
1380 
1381 	fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1382 
1383 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1384 		fc_fcp_rec(fsp);
1385 	else if (fsp->state & FC_SRB_RCV_STATUS)
1386 		fc_fcp_complete_locked(fsp);
1387 	else
1388 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1389 	fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1390 unlock:
1391 	fc_fcp_unlock_pkt(fsp);
1392 }
1393 
1394 /**
1395  * fc_fcp_rec() - Send a REC ELS request
1396  * @fsp: The FCP packet to send the REC request on
1397  */
1398 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1399 {
1400 	struct fc_lport *lport;
1401 	struct fc_frame *fp;
1402 	struct fc_rport *rport;
1403 	struct fc_rport_libfc_priv *rpriv;
1404 
1405 	lport = fsp->lp;
1406 	rport = fsp->rport;
1407 	rpriv = rport->dd_data;
1408 	if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1409 		fsp->status_code = FC_HRD_ERROR;
1410 		fsp->io_status = 0;
1411 		fc_fcp_complete_locked(fsp);
1412 		return;
1413 	}
1414 
1415 	fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1416 	if (!fp)
1417 		goto retry;
1418 
1419 	fr_seq(fp) = fsp->seq_ptr;
1420 	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1421 		       rpriv->local_port->port_id, FC_TYPE_ELS,
1422 		       FC_FCTL_REQ, 0);
1423 	if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1424 				 fc_fcp_rec_resp, fsp,
1425 				 2 * lport->r_a_tov)) {
1426 		fc_fcp_pkt_hold(fsp);		/* hold while REC outstanding */
1427 		return;
1428 	}
1429 retry:
1430 	if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1431 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1432 	else
1433 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1434 }
1435 
1436 /**
1437  * fc_fcp_rec_resp() - Handler for REC ELS responses
1438  * @seq: The sequence the response is on
1439  * @fp:	 The response frame
1440  * @arg: The FCP packet the response is on
1441  *
1442  * If the response is a reject then the scsi layer will handle
1443  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1444  * set the timeout and return. If the I/O was completed then complete the
1445  * exchange and tell the SCSI layer.
1446  */
1447 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1448 {
1449 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1450 	struct fc_els_rec_acc *recp;
1451 	struct fc_els_ls_rjt *rjt;
1452 	u32 e_stat;
1453 	u8 opcode;
1454 	u32 offset;
1455 	enum dma_data_direction data_dir;
1456 	enum fc_rctl r_ctl;
1457 	struct fc_rport_libfc_priv *rpriv;
1458 
1459 	if (IS_ERR(fp)) {
1460 		fc_fcp_rec_error(fsp, fp);
1461 		return;
1462 	}
1463 
1464 	if (fc_fcp_lock_pkt(fsp))
1465 		goto out;
1466 
1467 	fsp->recov_retry = 0;
1468 	opcode = fc_frame_payload_op(fp);
1469 	if (opcode == ELS_LS_RJT) {
1470 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1471 		switch (rjt->er_reason) {
1472 		default:
1473 			FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1474 				   "reason %d expl %d\n",
1475 				   fsp->rport->port_id, rjt->er_reason,
1476 				   rjt->er_explan);
1477 			/* fall through */
1478 		case ELS_RJT_UNSUP:
1479 			FC_FCP_DBG(fsp, "device does not support REC\n");
1480 			rpriv = fsp->rport->dd_data;
1481 			/*
1482 			 * if we do not spport RECs or got some bogus
1483 			 * reason then resetup timer so we check for
1484 			 * making progress.
1485 			 */
1486 			rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1487 			break;
1488 		case ELS_RJT_LOGIC:
1489 		case ELS_RJT_UNAB:
1490 			/*
1491 			 * If no data transfer, the command frame got dropped
1492 			 * so we just retry.  If data was transferred, we
1493 			 * lost the response but the target has no record,
1494 			 * so we abort and retry.
1495 			 */
1496 			if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1497 			    fsp->xfer_len == 0) {
1498 				fc_fcp_retry_cmd(fsp);
1499 				break;
1500 			}
1501 			fc_fcp_recovery(fsp, FC_ERROR);
1502 			break;
1503 		}
1504 	} else if (opcode == ELS_LS_ACC) {
1505 		if (fsp->state & FC_SRB_ABORTED)
1506 			goto unlock_out;
1507 
1508 		data_dir = fsp->cmd->sc_data_direction;
1509 		recp = fc_frame_payload_get(fp, sizeof(*recp));
1510 		offset = ntohl(recp->reca_fc4value);
1511 		e_stat = ntohl(recp->reca_e_stat);
1512 
1513 		if (e_stat & ESB_ST_COMPLETE) {
1514 
1515 			/*
1516 			 * The exchange is complete.
1517 			 *
1518 			 * For output, we must've lost the response.
1519 			 * For input, all data must've been sent.
1520 			 * We lost may have lost the response
1521 			 * (and a confirmation was requested) and maybe
1522 			 * some data.
1523 			 *
1524 			 * If all data received, send SRR
1525 			 * asking for response.	 If partial data received,
1526 			 * or gaps, SRR requests data at start of gap.
1527 			 * Recovery via SRR relies on in-order-delivery.
1528 			 */
1529 			if (data_dir == DMA_TO_DEVICE) {
1530 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1531 			} else if (fsp->xfer_contig_end == offset) {
1532 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1533 			} else {
1534 				offset = fsp->xfer_contig_end;
1535 				r_ctl = FC_RCTL_DD_SOL_DATA;
1536 			}
1537 			fc_fcp_srr(fsp, r_ctl, offset);
1538 		} else if (e_stat & ESB_ST_SEQ_INIT) {
1539 			unsigned int rec_tov = get_fsp_rec_tov(fsp);
1540 			/*
1541 			 * The remote port has the initiative, so just
1542 			 * keep waiting for it to complete.
1543 			 */
1544 			fc_fcp_timer_set(fsp, rec_tov);
1545 		} else {
1546 
1547 			/*
1548 			 * The exchange is incomplete, we have seq. initiative.
1549 			 * Lost response with requested confirmation,
1550 			 * lost confirmation, lost transfer ready or
1551 			 * lost write data.
1552 			 *
1553 			 * For output, if not all data was received, ask
1554 			 * for transfer ready to be repeated.
1555 			 *
1556 			 * If we received or sent all the data, send SRR to
1557 			 * request response.
1558 			 *
1559 			 * If we lost a response, we may have lost some read
1560 			 * data as well.
1561 			 */
1562 			r_ctl = FC_RCTL_DD_SOL_DATA;
1563 			if (data_dir == DMA_TO_DEVICE) {
1564 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1565 				if (offset < fsp->data_len)
1566 					r_ctl = FC_RCTL_DD_DATA_DESC;
1567 			} else if (offset == fsp->xfer_contig_end) {
1568 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1569 			} else if (fsp->xfer_contig_end < offset) {
1570 				offset = fsp->xfer_contig_end;
1571 			}
1572 			fc_fcp_srr(fsp, r_ctl, offset);
1573 		}
1574 	}
1575 unlock_out:
1576 	fc_fcp_unlock_pkt(fsp);
1577 out:
1578 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1579 	fc_frame_free(fp);
1580 }
1581 
1582 /**
1583  * fc_fcp_rec_error() - Handler for REC errors
1584  * @fsp: The FCP packet the error is on
1585  * @fp:	 The REC frame
1586  */
1587 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1588 {
1589 	int error = PTR_ERR(fp);
1590 
1591 	if (fc_fcp_lock_pkt(fsp))
1592 		goto out;
1593 
1594 	switch (error) {
1595 	case -FC_EX_CLOSED:
1596 		fc_fcp_retry_cmd(fsp);
1597 		break;
1598 
1599 	default:
1600 		FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1601 			   fsp, fsp->rport->port_id, error);
1602 		fsp->status_code = FC_CMD_PLOGO;
1603 		/* fall through */
1604 
1605 	case -FC_EX_TIMEOUT:
1606 		/*
1607 		 * Assume REC or LS_ACC was lost.
1608 		 * The exchange manager will have aborted REC, so retry.
1609 		 */
1610 		FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1611 			   fsp->rport->port_id, error, fsp->recov_retry,
1612 			   FC_MAX_RECOV_RETRY);
1613 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1614 			fc_fcp_rec(fsp);
1615 		else
1616 			fc_fcp_recovery(fsp, FC_ERROR);
1617 		break;
1618 	}
1619 	fc_fcp_unlock_pkt(fsp);
1620 out:
1621 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1622 }
1623 
1624 /**
1625  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1626  * @fsp: The FCP pkt that needs to be aborted
1627  */
1628 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1629 {
1630 	fsp->status_code = code;
1631 	fsp->cdb_status = 0;
1632 	fsp->io_status = 0;
1633 	/*
1634 	 * if this fails then we let the scsi command timer fire and
1635 	 * scsi-ml escalate.
1636 	 */
1637 	fc_fcp_send_abort(fsp);
1638 }
1639 
1640 /**
1641  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1642  * @fsp:   The FCP packet the SRR is to be sent on
1643  * @r_ctl: The R_CTL field for the SRR request
1644  * This is called after receiving status but insufficient data, or
1645  * when expecting status but the request has timed out.
1646  */
1647 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1648 {
1649 	struct fc_lport *lport = fsp->lp;
1650 	struct fc_rport *rport;
1651 	struct fc_rport_libfc_priv *rpriv;
1652 	struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1653 	struct fc_seq *seq;
1654 	struct fcp_srr *srr;
1655 	struct fc_frame *fp;
1656 	u8 cdb_op;
1657 	unsigned int rec_tov;
1658 
1659 	rport = fsp->rport;
1660 	rpriv = rport->dd_data;
1661 	cdb_op = fsp->cdb_cmd.fc_cdb[0];
1662 
1663 	if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1664 	    rpriv->rp_state != RPORT_ST_READY)
1665 		goto retry;			/* shouldn't happen */
1666 	fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1667 	if (!fp)
1668 		goto retry;
1669 
1670 	srr = fc_frame_payload_get(fp, sizeof(*srr));
1671 	memset(srr, 0, sizeof(*srr));
1672 	srr->srr_op = ELS_SRR;
1673 	srr->srr_ox_id = htons(ep->oxid);
1674 	srr->srr_rx_id = htons(ep->rxid);
1675 	srr->srr_r_ctl = r_ctl;
1676 	srr->srr_rel_off = htonl(offset);
1677 
1678 	fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1679 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1680 		       FC_FCTL_REQ, 0);
1681 
1682 	rec_tov = get_fsp_rec_tov(fsp);
1683 	seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL,
1684 				      fsp, jiffies_to_msecs(rec_tov));
1685 	if (!seq)
1686 		goto retry;
1687 
1688 	fsp->recov_seq = seq;
1689 	fsp->xfer_len = offset;
1690 	fsp->xfer_contig_end = offset;
1691 	fsp->state &= ~FC_SRB_RCV_STATUS;
1692 	fc_fcp_pkt_hold(fsp);		/* hold for outstanding SRR */
1693 	return;
1694 retry:
1695 	fc_fcp_retry_cmd(fsp);
1696 }
1697 
1698 /**
1699  * fc_fcp_srr_resp() - Handler for SRR response
1700  * @seq: The sequence the SRR is on
1701  * @fp:	 The SRR frame
1702  * @arg: The FCP packet the SRR is on
1703  */
1704 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1705 {
1706 	struct fc_fcp_pkt *fsp = arg;
1707 	struct fc_frame_header *fh;
1708 	unsigned int rec_tov;
1709 
1710 	if (IS_ERR(fp)) {
1711 		fc_fcp_srr_error(fsp, fp);
1712 		return;
1713 	}
1714 
1715 	if (fc_fcp_lock_pkt(fsp))
1716 		goto out;
1717 
1718 	fh = fc_frame_header_get(fp);
1719 	/*
1720 	 * BUG? fc_fcp_srr_error calls exch_done which would release
1721 	 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1722 	 * then fc_exch_timeout would be sending an abort. The exch_done
1723 	 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1724 	 * an abort response though.
1725 	 */
1726 	if (fh->fh_type == FC_TYPE_BLS) {
1727 		fc_fcp_unlock_pkt(fsp);
1728 		return;
1729 	}
1730 
1731 	fsp->recov_seq = NULL;
1732 	switch (fc_frame_payload_op(fp)) {
1733 	case ELS_LS_ACC:
1734 		fsp->recov_retry = 0;
1735 		rec_tov = get_fsp_rec_tov(fsp);
1736 		fc_fcp_timer_set(fsp, rec_tov);
1737 		break;
1738 	case ELS_LS_RJT:
1739 	default:
1740 		fc_fcp_recovery(fsp, FC_ERROR);
1741 		break;
1742 	}
1743 	fc_fcp_unlock_pkt(fsp);
1744 	fsp->lp->tt.exch_done(seq);
1745 out:
1746 	fc_frame_free(fp);
1747 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding SRR */
1748 }
1749 
1750 /**
1751  * fc_fcp_srr_error() - Handler for SRR errors
1752  * @fsp: The FCP packet that the SRR error is on
1753  * @fp:	 The SRR frame
1754  */
1755 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1756 {
1757 	if (fc_fcp_lock_pkt(fsp))
1758 		goto out;
1759 	fsp->lp->tt.exch_done(fsp->recov_seq);
1760 	fsp->recov_seq = NULL;
1761 	switch (PTR_ERR(fp)) {
1762 	case -FC_EX_TIMEOUT:
1763 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1764 			fc_fcp_rec(fsp);
1765 		else
1766 			fc_fcp_recovery(fsp, FC_TIMED_OUT);
1767 		break;
1768 	case -FC_EX_CLOSED:			/* e.g., link failure */
1769 		/* fall through */
1770 	default:
1771 		fc_fcp_retry_cmd(fsp);
1772 		break;
1773 	}
1774 	fc_fcp_unlock_pkt(fsp);
1775 out:
1776 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding SRR */
1777 }
1778 
1779 /**
1780  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1781  * @lport: The local port to be checked
1782  */
1783 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1784 {
1785 	/* lock ? */
1786 	return (lport->state == LPORT_ST_READY) &&
1787 		lport->link_up && !lport->qfull;
1788 }
1789 
1790 /**
1791  * fc_queuecommand() - The queuecommand function of the SCSI template
1792  * @shost: The Scsi_Host that the command was issued to
1793  * @cmd:   The scsi_cmnd to be executed
1794  *
1795  * This is the i/o strategy routine, called by the SCSI layer.
1796  */
1797 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1798 {
1799 	struct fc_lport *lport = shost_priv(shost);
1800 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1801 	struct fc_fcp_pkt *fsp;
1802 	struct fc_rport_libfc_priv *rpriv;
1803 	int rval;
1804 	int rc = 0;
1805 	struct fcoe_dev_stats *stats;
1806 
1807 	rval = fc_remote_port_chkready(rport);
1808 	if (rval) {
1809 		sc_cmd->result = rval;
1810 		sc_cmd->scsi_done(sc_cmd);
1811 		return 0;
1812 	}
1813 
1814 	if (!*(struct fc_remote_port **)rport->dd_data) {
1815 		/*
1816 		 * rport is transitioning from blocked/deleted to
1817 		 * online
1818 		 */
1819 		sc_cmd->result = DID_IMM_RETRY << 16;
1820 		sc_cmd->scsi_done(sc_cmd);
1821 		goto out;
1822 	}
1823 
1824 	rpriv = rport->dd_data;
1825 
1826 	if (!fc_fcp_lport_queue_ready(lport)) {
1827 		if (lport->qfull)
1828 			fc_fcp_can_queue_ramp_down(lport);
1829 		rc = SCSI_MLQUEUE_HOST_BUSY;
1830 		goto out;
1831 	}
1832 
1833 	fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1834 	if (fsp == NULL) {
1835 		rc = SCSI_MLQUEUE_HOST_BUSY;
1836 		goto out;
1837 	}
1838 
1839 	/*
1840 	 * build the libfc request pkt
1841 	 */
1842 	fsp->cmd = sc_cmd;	/* save the cmd */
1843 	fsp->rport = rport;	/* set the remote port ptr */
1844 
1845 	/*
1846 	 * set up the transfer length
1847 	 */
1848 	fsp->data_len = scsi_bufflen(sc_cmd);
1849 	fsp->xfer_len = 0;
1850 
1851 	/*
1852 	 * setup the data direction
1853 	 */
1854 	stats = per_cpu_ptr(lport->dev_stats, get_cpu());
1855 	if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1856 		fsp->req_flags = FC_SRB_READ;
1857 		stats->InputRequests++;
1858 		stats->InputBytes += fsp->data_len;
1859 	} else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1860 		fsp->req_flags = FC_SRB_WRITE;
1861 		stats->OutputRequests++;
1862 		stats->OutputBytes += fsp->data_len;
1863 	} else {
1864 		fsp->req_flags = 0;
1865 		stats->ControlRequests++;
1866 	}
1867 	put_cpu();
1868 
1869 	init_timer(&fsp->timer);
1870 	fsp->timer.data = (unsigned long)fsp;
1871 
1872 	/*
1873 	 * send it to the lower layer
1874 	 * if we get -1 return then put the request in the pending
1875 	 * queue.
1876 	 */
1877 	rval = fc_fcp_pkt_send(lport, fsp);
1878 	if (rval != 0) {
1879 		fsp->state = FC_SRB_FREE;
1880 		fc_fcp_pkt_release(fsp);
1881 		rc = SCSI_MLQUEUE_HOST_BUSY;
1882 	}
1883 out:
1884 	return rc;
1885 }
1886 EXPORT_SYMBOL(fc_queuecommand);
1887 
1888 /**
1889  * fc_io_compl() - Handle responses for completed commands
1890  * @fsp: The FCP packet that is complete
1891  *
1892  * Translates fcp_pkt errors to a Linux SCSI errors.
1893  * The fcp packet lock must be held when calling.
1894  */
1895 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1896 {
1897 	struct fc_fcp_internal *si;
1898 	struct scsi_cmnd *sc_cmd;
1899 	struct fc_lport *lport;
1900 	unsigned long flags;
1901 
1902 	/* release outstanding ddp context */
1903 	fc_fcp_ddp_done(fsp);
1904 
1905 	fsp->state |= FC_SRB_COMPL;
1906 	if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1907 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1908 		del_timer_sync(&fsp->timer);
1909 		spin_lock_bh(&fsp->scsi_pkt_lock);
1910 	}
1911 
1912 	lport = fsp->lp;
1913 	si = fc_get_scsi_internal(lport);
1914 
1915 	/*
1916 	 * if can_queue ramp down is done then try can_queue ramp up
1917 	 * since commands are completing now.
1918 	 */
1919 	if (si->last_can_queue_ramp_down_time)
1920 		fc_fcp_can_queue_ramp_up(lport);
1921 
1922 	sc_cmd = fsp->cmd;
1923 	CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1924 	switch (fsp->status_code) {
1925 	case FC_COMPLETE:
1926 		if (fsp->cdb_status == 0) {
1927 			/*
1928 			 * good I/O status
1929 			 */
1930 			sc_cmd->result = DID_OK << 16;
1931 			if (fsp->scsi_resid)
1932 				CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1933 		} else {
1934 			/*
1935 			 * transport level I/O was ok but scsi
1936 			 * has non zero status
1937 			 */
1938 			sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1939 		}
1940 		break;
1941 	case FC_ERROR:
1942 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1943 			   "due to FC_ERROR\n");
1944 		sc_cmd->result = DID_ERROR << 16;
1945 		break;
1946 	case FC_DATA_UNDRUN:
1947 		if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1948 			/*
1949 			 * scsi status is good but transport level
1950 			 * underrun.
1951 			 */
1952 			if (fsp->state & FC_SRB_RCV_STATUS) {
1953 				sc_cmd->result = DID_OK << 16;
1954 			} else {
1955 				FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1956 					   " due to FC_DATA_UNDRUN (trans)\n");
1957 				sc_cmd->result = DID_ERROR << 16;
1958 			}
1959 		} else {
1960 			/*
1961 			 * scsi got underrun, this is an error
1962 			 */
1963 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1964 				   "due to FC_DATA_UNDRUN (scsi)\n");
1965 			CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1966 			sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1967 		}
1968 		break;
1969 	case FC_DATA_OVRRUN:
1970 		/*
1971 		 * overrun is an error
1972 		 */
1973 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1974 			   "due to FC_DATA_OVRRUN\n");
1975 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1976 		break;
1977 	case FC_CMD_ABORTED:
1978 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1979 			  "due to FC_CMD_ABORTED\n");
1980 		sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1981 		break;
1982 	case FC_CMD_RESET:
1983 		FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
1984 			   "due to FC_CMD_RESET\n");
1985 		sc_cmd->result = (DID_RESET << 16);
1986 		break;
1987 	case FC_HRD_ERROR:
1988 		FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
1989 			   "due to FC_HRD_ERROR\n");
1990 		sc_cmd->result = (DID_NO_CONNECT << 16);
1991 		break;
1992 	case FC_CRC_ERROR:
1993 		FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
1994 			   "due to FC_CRC_ERROR\n");
1995 		sc_cmd->result = (DID_PARITY << 16);
1996 		break;
1997 	case FC_TIMED_OUT:
1998 		FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
1999 			   "due to FC_TIMED_OUT\n");
2000 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
2001 		break;
2002 	default:
2003 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2004 			   "due to unknown error\n");
2005 		sc_cmd->result = (DID_ERROR << 16);
2006 		break;
2007 	}
2008 
2009 	if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2010 		sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2011 
2012 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2013 	list_del(&fsp->list);
2014 	sc_cmd->SCp.ptr = NULL;
2015 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2016 	sc_cmd->scsi_done(sc_cmd);
2017 
2018 	/* release ref from initial allocation in queue command */
2019 	fc_fcp_pkt_release(fsp);
2020 }
2021 
2022 /**
2023  * fc_eh_abort() - Abort a command
2024  * @sc_cmd: The SCSI command to abort
2025  *
2026  * From SCSI host template.
2027  * Send an ABTS to the target device and wait for the response.
2028  */
2029 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2030 {
2031 	struct fc_fcp_pkt *fsp;
2032 	struct fc_lport *lport;
2033 	struct fc_fcp_internal *si;
2034 	int rc = FAILED;
2035 	unsigned long flags;
2036 
2037 	lport = shost_priv(sc_cmd->device->host);
2038 	if (lport->state != LPORT_ST_READY)
2039 		return rc;
2040 	else if (!lport->link_up)
2041 		return rc;
2042 
2043 	si = fc_get_scsi_internal(lport);
2044 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2045 	fsp = CMD_SP(sc_cmd);
2046 	if (!fsp) {
2047 		/* command completed while scsi eh was setting up */
2048 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2049 		return SUCCESS;
2050 	}
2051 	/* grab a ref so the fsp and sc_cmd cannot be relased from under us */
2052 	fc_fcp_pkt_hold(fsp);
2053 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2054 
2055 	if (fc_fcp_lock_pkt(fsp)) {
2056 		/* completed while we were waiting for timer to be deleted */
2057 		rc = SUCCESS;
2058 		goto release_pkt;
2059 	}
2060 
2061 	rc = fc_fcp_pkt_abort(fsp);
2062 	fc_fcp_unlock_pkt(fsp);
2063 
2064 release_pkt:
2065 	fc_fcp_pkt_release(fsp);
2066 	return rc;
2067 }
2068 EXPORT_SYMBOL(fc_eh_abort);
2069 
2070 /**
2071  * fc_eh_device_reset() - Reset a single LUN
2072  * @sc_cmd: The SCSI command which identifies the device whose
2073  *	    LUN is to be reset
2074  *
2075  * Set from SCSI host template.
2076  */
2077 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2078 {
2079 	struct fc_lport *lport;
2080 	struct fc_fcp_pkt *fsp;
2081 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2082 	int rc = FAILED;
2083 	int rval;
2084 
2085 	rval = fc_remote_port_chkready(rport);
2086 	if (rval)
2087 		goto out;
2088 
2089 	lport = shost_priv(sc_cmd->device->host);
2090 
2091 	if (lport->state != LPORT_ST_READY)
2092 		return rc;
2093 
2094 	FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2095 
2096 	fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2097 	if (fsp == NULL) {
2098 		printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2099 		goto out;
2100 	}
2101 
2102 	/*
2103 	 * Build the libfc request pkt. Do not set the scsi cmnd, because
2104 	 * the sc passed in is not setup for execution like when sent
2105 	 * through the queuecommand callout.
2106 	 */
2107 	fsp->rport = rport;	/* set the remote port ptr */
2108 
2109 	/*
2110 	 * flush outstanding commands
2111 	 */
2112 	rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2113 	fsp->state = FC_SRB_FREE;
2114 	fc_fcp_pkt_release(fsp);
2115 
2116 out:
2117 	return rc;
2118 }
2119 EXPORT_SYMBOL(fc_eh_device_reset);
2120 
2121 /**
2122  * fc_eh_host_reset() - Reset a Scsi_Host.
2123  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2124  */
2125 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2126 {
2127 	struct Scsi_Host *shost = sc_cmd->device->host;
2128 	struct fc_lport *lport = shost_priv(shost);
2129 	unsigned long wait_tmo;
2130 
2131 	FC_SCSI_DBG(lport, "Resetting host\n");
2132 
2133 	lport->tt.lport_reset(lport);
2134 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2135 	while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2136 							       wait_tmo))
2137 		msleep(1000);
2138 
2139 	if (fc_fcp_lport_queue_ready(lport)) {
2140 		shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2141 			     "on port (%6.6x)\n", lport->port_id);
2142 		return SUCCESS;
2143 	} else {
2144 		shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2145 			     "port (%6.6x) is not ready.\n",
2146 			     lport->port_id);
2147 		return FAILED;
2148 	}
2149 }
2150 EXPORT_SYMBOL(fc_eh_host_reset);
2151 
2152 /**
2153  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2154  * @sdev: The SCSI device that identifies the SCSI host
2155  *
2156  * Configures queue depth based on host's cmd_per_len. If not set
2157  * then we use the libfc default.
2158  */
2159 int fc_slave_alloc(struct scsi_device *sdev)
2160 {
2161 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2162 
2163 	if (!rport || fc_remote_port_chkready(rport))
2164 		return -ENXIO;
2165 
2166 	if (sdev->tagged_supported)
2167 		scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2168 	else
2169 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
2170 					FC_FCP_DFLT_QUEUE_DEPTH);
2171 
2172 	return 0;
2173 }
2174 EXPORT_SYMBOL(fc_slave_alloc);
2175 
2176 /**
2177  * fc_change_queue_depth() - Change a device's queue depth
2178  * @sdev:   The SCSI device whose queue depth is to change
2179  * @qdepth: The new queue depth
2180  * @reason: The resason for the change
2181  */
2182 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2183 {
2184 	switch (reason) {
2185 	case SCSI_QDEPTH_DEFAULT:
2186 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2187 		break;
2188 	case SCSI_QDEPTH_QFULL:
2189 		scsi_track_queue_full(sdev, qdepth);
2190 		break;
2191 	case SCSI_QDEPTH_RAMP_UP:
2192 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2193 		break;
2194 	default:
2195 		return -EOPNOTSUPP;
2196 	}
2197 	return sdev->queue_depth;
2198 }
2199 EXPORT_SYMBOL(fc_change_queue_depth);
2200 
2201 /**
2202  * fc_change_queue_type() - Change a device's queue type
2203  * @sdev:     The SCSI device whose queue depth is to change
2204  * @tag_type: Identifier for queue type
2205  */
2206 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2207 {
2208 	if (sdev->tagged_supported) {
2209 		scsi_set_tag_type(sdev, tag_type);
2210 		if (tag_type)
2211 			scsi_activate_tcq(sdev, sdev->queue_depth);
2212 		else
2213 			scsi_deactivate_tcq(sdev, sdev->queue_depth);
2214 	} else
2215 		tag_type = 0;
2216 
2217 	return tag_type;
2218 }
2219 EXPORT_SYMBOL(fc_change_queue_type);
2220 
2221 /**
2222  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2223  * @lport: The local port that no longer needs the FCP layer
2224  */
2225 void fc_fcp_destroy(struct fc_lport *lport)
2226 {
2227 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2228 
2229 	if (!list_empty(&si->scsi_pkt_queue))
2230 		printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2231 		       "port (%6.6x)\n", lport->port_id);
2232 
2233 	mempool_destroy(si->scsi_pkt_pool);
2234 	kfree(si);
2235 	lport->scsi_priv = NULL;
2236 }
2237 EXPORT_SYMBOL(fc_fcp_destroy);
2238 
2239 int fc_setup_fcp(void)
2240 {
2241 	int rc = 0;
2242 
2243 	scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2244 					    sizeof(struct fc_fcp_pkt),
2245 					    0, SLAB_HWCACHE_ALIGN, NULL);
2246 	if (!scsi_pkt_cachep) {
2247 		printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2248 		       "module load failed!");
2249 		rc = -ENOMEM;
2250 	}
2251 
2252 	return rc;
2253 }
2254 
2255 void fc_destroy_fcp(void)
2256 {
2257 	if (scsi_pkt_cachep)
2258 		kmem_cache_destroy(scsi_pkt_cachep);
2259 }
2260 
2261 /**
2262  * fc_fcp_init() - Initialize the FCP layer for a local port
2263  * @lport: The local port to initialize the exchange layer for
2264  */
2265 int fc_fcp_init(struct fc_lport *lport)
2266 {
2267 	int rc;
2268 	struct fc_fcp_internal *si;
2269 
2270 	if (!lport->tt.fcp_cmd_send)
2271 		lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2272 
2273 	if (!lport->tt.fcp_cleanup)
2274 		lport->tt.fcp_cleanup = fc_fcp_cleanup;
2275 
2276 	if (!lport->tt.fcp_abort_io)
2277 		lport->tt.fcp_abort_io = fc_fcp_abort_io;
2278 
2279 	si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2280 	if (!si)
2281 		return -ENOMEM;
2282 	lport->scsi_priv = si;
2283 	si->max_can_queue = lport->host->can_queue;
2284 	INIT_LIST_HEAD(&si->scsi_pkt_queue);
2285 	spin_lock_init(&si->scsi_queue_lock);
2286 
2287 	si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2288 	if (!si->scsi_pkt_pool) {
2289 		rc = -ENOMEM;
2290 		goto free_internal;
2291 	}
2292 	return 0;
2293 
2294 free_internal:
2295 	kfree(si);
2296 	return rc;
2297 }
2298 EXPORT_SYMBOL(fc_fcp_init);
2299