xref: /openbmc/linux/drivers/scsi/libfc/fc_fcp.c (revision 31c0a631)
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21 
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31 
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37 
38 #include <scsi/fc/fc_fc2.h>
39 
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42 
43 #include "fc_libfc.h"
44 
45 static struct kmem_cache *scsi_pkt_cachep;
46 
47 /* SRB state definitions */
48 #define FC_SRB_FREE		0		/* cmd is free */
49 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
50 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
51 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
52 #define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
53 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
54 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
56 
57 #define FC_SRB_READ		(1 << 1)
58 #define FC_SRB_WRITE		(1 << 0)
59 
60 /*
61  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
62  */
63 #define CMD_SP(Cmnd)		    ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
64 #define CMD_ENTRY_STATUS(Cmnd)	    ((Cmnd)->SCp.have_data_in)
65 #define CMD_COMPL_STATUS(Cmnd)	    ((Cmnd)->SCp.this_residual)
66 #define CMD_SCSI_STATUS(Cmnd)	    ((Cmnd)->SCp.Status)
67 #define CMD_RESID_LEN(Cmnd)	    ((Cmnd)->SCp.buffers_residual)
68 
69 /**
70  * struct fc_fcp_internal - FCP layer internal data
71  * @scsi_pkt_pool: Memory pool to draw FCP packets from
72  * @scsi_queue_lock: Protects the scsi_pkt_queue
73  * @scsi_pkt_queue: Current FCP packets
74  * @last_can_queue_ramp_down_time: ramp down time
75  * @last_can_queue_ramp_up_time: ramp up time
76  * @max_can_queue: max can_queue size
77  */
78 struct fc_fcp_internal {
79 	mempool_t		*scsi_pkt_pool;
80 	spinlock_t		scsi_queue_lock;
81 	struct list_head	scsi_pkt_queue;
82 	unsigned long		last_can_queue_ramp_down_time;
83 	unsigned long		last_can_queue_ramp_up_time;
84 	int			max_can_queue;
85 };
86 
87 #define fc_get_scsi_internal(x)	((struct fc_fcp_internal *)(x)->scsi_priv)
88 
89 /*
90  * function prototypes
91  * FC scsi I/O related functions
92  */
93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
100 static void fc_fcp_timeout(unsigned long);
101 static void fc_fcp_rec(struct fc_fcp_pkt *);
102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
104 static void fc_io_compl(struct fc_fcp_pkt *);
105 
106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
109 
110 /*
111  * command status codes
112  */
113 #define FC_COMPLETE		0
114 #define FC_CMD_ABORTED		1
115 #define FC_CMD_RESET		2
116 #define FC_CMD_PLOGO		3
117 #define FC_SNS_RCV		4
118 #define FC_TRANS_ERR		5
119 #define FC_DATA_OVRRUN		6
120 #define FC_DATA_UNDRUN		7
121 #define FC_ERROR		8
122 #define FC_HRD_ERROR		9
123 #define FC_CRC_ERROR		10
124 #define FC_TIMED_OUT		11
125 #define FC_TRANS_RESET		12
126 
127 /*
128  * Error recovery timeout values.
129  */
130 #define FC_SCSI_TM_TOV		(10 * HZ)
131 #define FC_HOST_RESET_TIMEOUT	(30 * HZ)
132 #define FC_CAN_QUEUE_PERIOD	(60 * HZ)
133 
134 #define FC_MAX_ERROR_CNT	5
135 #define FC_MAX_RECOV_RETRY	3
136 
137 #define FC_FCP_DFLT_QUEUE_DEPTH 32
138 
139 /**
140  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
141  * @lport: The local port that the FCP packet is for
142  * @gfp:   GFP flags for allocation
143  *
144  * Return value: fcp_pkt structure or null on allocation failure.
145  * Context:	 Can be called from process context, no lock is required.
146  */
147 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
148 {
149 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
150 	struct fc_fcp_pkt *fsp;
151 
152 	fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
153 	if (fsp) {
154 		memset(fsp, 0, sizeof(*fsp));
155 		fsp->lp = lport;
156 		fsp->xfer_ddp = FC_XID_UNKNOWN;
157 		atomic_set(&fsp->ref_cnt, 1);
158 		init_timer(&fsp->timer);
159 		fsp->timer.data = (unsigned long)fsp;
160 		INIT_LIST_HEAD(&fsp->list);
161 		spin_lock_init(&fsp->scsi_pkt_lock);
162 	} else {
163 		per_cpu_ptr(lport->stats, get_cpu())->FcpPktAllocFails++;
164 		put_cpu();
165 	}
166 	return fsp;
167 }
168 
169 /**
170  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
171  * @fsp: The FCP packet to be released
172  *
173  * Context: Can be called from process or interrupt context,
174  *	    no lock is required.
175  */
176 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
177 {
178 	if (atomic_dec_and_test(&fsp->ref_cnt)) {
179 		struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
180 
181 		mempool_free(fsp, si->scsi_pkt_pool);
182 	}
183 }
184 
185 /**
186  * fc_fcp_pkt_hold() - Hold a fcp_pkt
187  * @fsp: The FCP packet to be held
188  */
189 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
190 {
191 	atomic_inc(&fsp->ref_cnt);
192 }
193 
194 /**
195  * fc_fcp_pkt_destroy() - Release hold on a fcp_pkt
196  * @seq: The sequence that the FCP packet is on (required by destructor API)
197  * @fsp: The FCP packet to be released
198  *
199  * This routine is called by a destructor callback in the exch_seq_send()
200  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
201  * argument even though it is not used by this routine.
202  *
203  * Context: No locking required.
204  */
205 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
206 {
207 	fc_fcp_pkt_release(fsp);
208 }
209 
210 /**
211  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
212  * @fsp: The FCP packet to be locked and incremented
213  *
214  * We should only return error if we return a command to SCSI-ml before
215  * getting a response. This can happen in cases where we send a abort, but
216  * do not wait for the response and the abort and command can be passing
217  * each other on the wire/network-layer.
218  *
219  * Note: this function locks the packet and gets a reference to allow
220  * callers to call the completion function while the lock is held and
221  * not have to worry about the packets refcount.
222  *
223  * TODO: Maybe we should just have callers grab/release the lock and
224  * have a function that they call to verify the fsp and grab a ref if
225  * needed.
226  */
227 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
228 {
229 	spin_lock_bh(&fsp->scsi_pkt_lock);
230 	if (fsp->state & FC_SRB_COMPL) {
231 		spin_unlock_bh(&fsp->scsi_pkt_lock);
232 		return -EPERM;
233 	}
234 
235 	fc_fcp_pkt_hold(fsp);
236 	return 0;
237 }
238 
239 /**
240  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
241  *			 reference count
242  * @fsp: The FCP packet to be unlocked and decremented
243  */
244 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
245 {
246 	spin_unlock_bh(&fsp->scsi_pkt_lock);
247 	fc_fcp_pkt_release(fsp);
248 }
249 
250 /**
251  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
252  * @fsp:   The FCP packet to start a timer for
253  * @delay: The timeout period in jiffies
254  */
255 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
256 {
257 	if (!(fsp->state & FC_SRB_COMPL)) {
258 		mod_timer(&fsp->timer, jiffies + delay);
259 		fsp->timer_delay = delay;
260 	}
261 }
262 
263 static void fc_fcp_abort_done(struct fc_fcp_pkt *fsp)
264 {
265 	fsp->state |= FC_SRB_ABORTED;
266 	fsp->state &= ~FC_SRB_ABORT_PENDING;
267 
268 	if (fsp->wait_for_comp)
269 		complete(&fsp->tm_done);
270 	else
271 		fc_fcp_complete_locked(fsp);
272 }
273 
274 /**
275  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
276  *			 fcp_pkt
277  * @fsp: The FCP packet to abort exchanges on
278  */
279 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
280 {
281 	int rc;
282 
283 	if (!fsp->seq_ptr)
284 		return -EINVAL;
285 
286 	per_cpu_ptr(fsp->lp->stats, get_cpu())->FcpPktAborts++;
287 	put_cpu();
288 
289 	fsp->state |= FC_SRB_ABORT_PENDING;
290 	rc = fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
291 	/*
292 	 * ->seq_exch_abort() might return -ENXIO if
293 	 * the sequence is already completed
294 	 */
295 	if (rc == -ENXIO) {
296 		fc_fcp_abort_done(fsp);
297 		rc = 0;
298 	}
299 	return rc;
300 }
301 
302 /**
303  * fc_fcp_retry_cmd() - Retry a fcp_pkt
304  * @fsp: The FCP packet to be retried
305  *
306  * Sets the status code to be FC_ERROR and then calls
307  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
308  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
309  * The SCSI-ml will retry the command.
310  */
311 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp, int status_code)
312 {
313 	if (fsp->seq_ptr) {
314 		fsp->lp->tt.exch_done(fsp->seq_ptr);
315 		fsp->seq_ptr = NULL;
316 	}
317 
318 	fsp->state &= ~FC_SRB_ABORT_PENDING;
319 	fsp->io_status = 0;
320 	fsp->status_code = status_code;
321 	fc_fcp_complete_locked(fsp);
322 }
323 
324 /**
325  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
326  * @fsp: The FCP packet that will manage the DDP frames
327  * @xid: The XID that will be used for the DDP exchange
328  */
329 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
330 {
331 	struct fc_lport *lport;
332 
333 	lport = fsp->lp;
334 	if ((fsp->req_flags & FC_SRB_READ) &&
335 	    (lport->lro_enabled) && (lport->tt.ddp_setup)) {
336 		if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
337 					scsi_sg_count(fsp->cmd)))
338 			fsp->xfer_ddp = xid;
339 	}
340 }
341 
342 /**
343  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
344  *		       DDP related resources for a fcp_pkt
345  * @fsp: The FCP packet that DDP had been used on
346  */
347 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
348 {
349 	struct fc_lport *lport;
350 
351 	if (!fsp)
352 		return;
353 
354 	if (fsp->xfer_ddp == FC_XID_UNKNOWN)
355 		return;
356 
357 	lport = fsp->lp;
358 	if (lport->tt.ddp_done) {
359 		fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
360 		fsp->xfer_ddp = FC_XID_UNKNOWN;
361 	}
362 }
363 
364 /**
365  * fc_fcp_can_queue_ramp_up() - increases can_queue
366  * @lport: lport to ramp up can_queue
367  */
368 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
369 {
370 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
371 	unsigned long flags;
372 	int can_queue;
373 
374 	spin_lock_irqsave(lport->host->host_lock, flags);
375 
376 	if (si->last_can_queue_ramp_up_time &&
377 	    (time_before(jiffies, si->last_can_queue_ramp_up_time +
378 			 FC_CAN_QUEUE_PERIOD)))
379 		goto unlock;
380 
381 	if (time_before(jiffies, si->last_can_queue_ramp_down_time +
382 			FC_CAN_QUEUE_PERIOD))
383 		goto unlock;
384 
385 	si->last_can_queue_ramp_up_time = jiffies;
386 
387 	can_queue = lport->host->can_queue << 1;
388 	if (can_queue >= si->max_can_queue) {
389 		can_queue = si->max_can_queue;
390 		si->last_can_queue_ramp_down_time = 0;
391 	}
392 	lport->host->can_queue = can_queue;
393 	shost_printk(KERN_ERR, lport->host, "libfc: increased "
394 		     "can_queue to %d.\n", can_queue);
395 
396 unlock:
397 	spin_unlock_irqrestore(lport->host->host_lock, flags);
398 }
399 
400 /**
401  * fc_fcp_can_queue_ramp_down() - reduces can_queue
402  * @lport: lport to reduce can_queue
403  *
404  * If we are getting memory allocation failures, then we may
405  * be trying to execute too many commands. We let the running
406  * commands complete or timeout, then try again with a reduced
407  * can_queue. Eventually we will hit the point where we run
408  * on all reserved structs.
409  */
410 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
411 {
412 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
413 	unsigned long flags;
414 	int can_queue;
415 
416 	spin_lock_irqsave(lport->host->host_lock, flags);
417 
418 	if (si->last_can_queue_ramp_down_time &&
419 	    (time_before(jiffies, si->last_can_queue_ramp_down_time +
420 			 FC_CAN_QUEUE_PERIOD)))
421 		goto unlock;
422 
423 	si->last_can_queue_ramp_down_time = jiffies;
424 
425 	can_queue = lport->host->can_queue;
426 	can_queue >>= 1;
427 	if (!can_queue)
428 		can_queue = 1;
429 	lport->host->can_queue = can_queue;
430 
431 unlock:
432 	spin_unlock_irqrestore(lport->host->host_lock, flags);
433 }
434 
435 /*
436  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
437  * @lport:	fc lport struct
438  * @len:	payload length
439  *
440  * Allocates fc_frame structure and buffer but if fails to allocate
441  * then reduce can_queue.
442  */
443 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
444 						  size_t len)
445 {
446 	struct fc_frame *fp;
447 
448 	fp = fc_frame_alloc(lport, len);
449 	if (likely(fp))
450 		return fp;
451 
452 	per_cpu_ptr(lport->stats, get_cpu())->FcpFrameAllocFails++;
453 	put_cpu();
454 	/* error case */
455 	fc_fcp_can_queue_ramp_down(lport);
456 	shost_printk(KERN_ERR, lport->host,
457 		     "libfc: Could not allocate frame, "
458 		     "reducing can_queue to %d.\n", lport->host->can_queue);
459 	return NULL;
460 }
461 
462 /**
463  * get_fsp_rec_tov() - Helper function to get REC_TOV
464  * @fsp: the FCP packet
465  *
466  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
467  */
468 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
469 {
470 	struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
471 	unsigned int e_d_tov = FC_DEF_E_D_TOV;
472 
473 	if (rpriv && rpriv->e_d_tov > e_d_tov)
474 		e_d_tov = rpriv->e_d_tov;
475 	return msecs_to_jiffies(e_d_tov) + HZ;
476 }
477 
478 /**
479  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
480  * @fsp: The FCP packet the data is on
481  * @fp:	 The data frame
482  */
483 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
484 {
485 	struct scsi_cmnd *sc = fsp->cmd;
486 	struct fc_lport *lport = fsp->lp;
487 	struct fc_stats *stats;
488 	struct fc_frame_header *fh;
489 	size_t start_offset;
490 	size_t offset;
491 	u32 crc;
492 	u32 copy_len = 0;
493 	size_t len;
494 	void *buf;
495 	struct scatterlist *sg;
496 	u32 nents;
497 	u8 host_bcode = FC_COMPLETE;
498 
499 	fh = fc_frame_header_get(fp);
500 	offset = ntohl(fh->fh_parm_offset);
501 	start_offset = offset;
502 	len = fr_len(fp) - sizeof(*fh);
503 	buf = fc_frame_payload_get(fp, 0);
504 
505 	/*
506 	 * if this I/O is ddped then clear it and initiate recovery since data
507 	 * frames are expected to be placed directly in that case.
508 	 *
509 	 * Indicate error to scsi-ml because something went wrong with the
510 	 * ddp handling to get us here.
511 	 */
512 	if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
513 		fc_fcp_ddp_done(fsp);
514 		FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
515 		host_bcode = FC_ERROR;
516 		goto err;
517 	}
518 	if (offset + len > fsp->data_len) {
519 		/* this should never happen */
520 		if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
521 		    fc_frame_crc_check(fp))
522 			goto crc_err;
523 		FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
524 			   "data_len %x\n", len, offset, fsp->data_len);
525 
526 		/* Data is corrupted indicate scsi-ml should retry */
527 		host_bcode = FC_DATA_OVRRUN;
528 		goto err;
529 	}
530 	if (offset != fsp->xfer_len)
531 		fsp->state |= FC_SRB_DISCONTIG;
532 
533 	sg = scsi_sglist(sc);
534 	nents = scsi_sg_count(sc);
535 
536 	if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
537 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
538 						    &offset, NULL);
539 	} else {
540 		crc = crc32(~0, (u8 *) fh, sizeof(*fh));
541 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
542 						    &offset, &crc);
543 		buf = fc_frame_payload_get(fp, 0);
544 		if (len % 4)
545 			crc = crc32(crc, buf + len, 4 - (len % 4));
546 
547 		if (~crc != le32_to_cpu(fr_crc(fp))) {
548 crc_err:
549 			stats = per_cpu_ptr(lport->stats, get_cpu());
550 			stats->ErrorFrames++;
551 			/* per cpu count, not total count, but OK for limit */
552 			if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
553 				printk(KERN_WARNING "libfc: CRC error on data "
554 				       "frame for port (%6.6x)\n",
555 				       lport->port_id);
556 			put_cpu();
557 			/*
558 			 * Assume the frame is total garbage.
559 			 * We may have copied it over the good part
560 			 * of the buffer.
561 			 * If so, we need to retry the entire operation.
562 			 * Otherwise, ignore it.
563 			 */
564 			if (fsp->state & FC_SRB_DISCONTIG) {
565 				host_bcode = FC_CRC_ERROR;
566 				goto err;
567 			}
568 			return;
569 		}
570 	}
571 
572 	if (fsp->xfer_contig_end == start_offset)
573 		fsp->xfer_contig_end += copy_len;
574 	fsp->xfer_len += copy_len;
575 
576 	/*
577 	 * In the very rare event that this data arrived after the response
578 	 * and completes the transfer, call the completion handler.
579 	 */
580 	if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
581 	    fsp->xfer_len == fsp->data_len - fsp->scsi_resid) {
582 		FC_FCP_DBG( fsp, "complete out-of-order sequence\n" );
583 		fc_fcp_complete_locked(fsp);
584 	}
585 	return;
586 err:
587 	fc_fcp_recovery(fsp, host_bcode);
588 }
589 
590 /**
591  * fc_fcp_send_data() - Send SCSI data to a target
592  * @fsp:      The FCP packet the data is on
593  * @sp:	      The sequence the data is to be sent on
594  * @offset:   The starting offset for this data request
595  * @seq_blen: The burst length for this data request
596  *
597  * Called after receiving a Transfer Ready data descriptor.
598  * If the LLD is capable of sequence offload then send down the
599  * seq_blen amount of data in single frame, otherwise send
600  * multiple frames of the maximum frame payload supported by
601  * the target port.
602  */
603 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
604 			    size_t offset, size_t seq_blen)
605 {
606 	struct fc_exch *ep;
607 	struct scsi_cmnd *sc;
608 	struct scatterlist *sg;
609 	struct fc_frame *fp = NULL;
610 	struct fc_lport *lport = fsp->lp;
611 	struct page *page;
612 	size_t remaining;
613 	size_t t_blen;
614 	size_t tlen;
615 	size_t sg_bytes;
616 	size_t frame_offset, fh_parm_offset;
617 	size_t off;
618 	int error;
619 	void *data = NULL;
620 	void *page_addr;
621 	int using_sg = lport->sg_supp;
622 	u32 f_ctl;
623 
624 	WARN_ON(seq_blen <= 0);
625 	if (unlikely(offset + seq_blen > fsp->data_len)) {
626 		/* this should never happen */
627 		FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
628 			   "offset %zx\n", seq_blen, offset);
629 		fc_fcp_send_abort(fsp);
630 		return 0;
631 	} else if (offset != fsp->xfer_len) {
632 		/* Out of Order Data Request - no problem, but unexpected. */
633 		FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
634 			   "seq_blen %zx offset %zx\n", seq_blen, offset);
635 	}
636 
637 	/*
638 	 * if LLD is capable of seq_offload then set transport
639 	 * burst length (t_blen) to seq_blen, otherwise set t_blen
640 	 * to max FC frame payload previously set in fsp->max_payload.
641 	 */
642 	t_blen = fsp->max_payload;
643 	if (lport->seq_offload) {
644 		t_blen = min(seq_blen, (size_t)lport->lso_max);
645 		FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
646 			   fsp, seq_blen, lport->lso_max, t_blen);
647 	}
648 
649 	if (t_blen > 512)
650 		t_blen &= ~(512 - 1);	/* round down to block size */
651 	sc = fsp->cmd;
652 
653 	remaining = seq_blen;
654 	fh_parm_offset = frame_offset = offset;
655 	tlen = 0;
656 	seq = lport->tt.seq_start_next(seq);
657 	f_ctl = FC_FC_REL_OFF;
658 	WARN_ON(!seq);
659 
660 	sg = scsi_sglist(sc);
661 
662 	while (remaining > 0 && sg) {
663 		if (offset >= sg->length) {
664 			offset -= sg->length;
665 			sg = sg_next(sg);
666 			continue;
667 		}
668 		if (!fp) {
669 			tlen = min(t_blen, remaining);
670 
671 			/*
672 			 * TODO.  Temporary workaround.	 fc_seq_send() can't
673 			 * handle odd lengths in non-linear skbs.
674 			 * This will be the final fragment only.
675 			 */
676 			if (tlen % 4)
677 				using_sg = 0;
678 			fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
679 			if (!fp)
680 				return -ENOMEM;
681 
682 			data = fc_frame_header_get(fp) + 1;
683 			fh_parm_offset = frame_offset;
684 			fr_max_payload(fp) = fsp->max_payload;
685 		}
686 
687 		off = offset + sg->offset;
688 		sg_bytes = min(tlen, sg->length - offset);
689 		sg_bytes = min(sg_bytes,
690 			       (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
691 		page = sg_page(sg) + (off >> PAGE_SHIFT);
692 		if (using_sg) {
693 			get_page(page);
694 			skb_fill_page_desc(fp_skb(fp),
695 					   skb_shinfo(fp_skb(fp))->nr_frags,
696 					   page, off & ~PAGE_MASK, sg_bytes);
697 			fp_skb(fp)->data_len += sg_bytes;
698 			fr_len(fp) += sg_bytes;
699 			fp_skb(fp)->truesize += PAGE_SIZE;
700 		} else {
701 			/*
702 			 * The scatterlist item may be bigger than PAGE_SIZE,
703 			 * but we must not cross pages inside the kmap.
704 			 */
705 			page_addr = kmap_atomic(page);
706 			memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
707 			       sg_bytes);
708 			kunmap_atomic(page_addr);
709 			data += sg_bytes;
710 		}
711 		offset += sg_bytes;
712 		frame_offset += sg_bytes;
713 		tlen -= sg_bytes;
714 		remaining -= sg_bytes;
715 
716 		if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
717 		    (tlen))
718 			continue;
719 
720 		/*
721 		 * Send sequence with transfer sequence initiative in case
722 		 * this is last FCP frame of the sequence.
723 		 */
724 		if (remaining == 0)
725 			f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
726 
727 		ep = fc_seq_exch(seq);
728 		fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
729 			       FC_TYPE_FCP, f_ctl, fh_parm_offset);
730 
731 		/*
732 		 * send fragment using for a sequence.
733 		 */
734 		error = lport->tt.seq_send(lport, seq, fp);
735 		if (error) {
736 			WARN_ON(1);		/* send error should be rare */
737 			return error;
738 		}
739 		fp = NULL;
740 	}
741 	fsp->xfer_len += seq_blen;	/* premature count? */
742 	return 0;
743 }
744 
745 /**
746  * fc_fcp_abts_resp() - Receive an ABTS response
747  * @fsp: The FCP packet that is being aborted
748  * @fp:	 The response frame
749  */
750 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
751 {
752 	int ba_done = 1;
753 	struct fc_ba_rjt *brp;
754 	struct fc_frame_header *fh;
755 
756 	fh = fc_frame_header_get(fp);
757 	switch (fh->fh_r_ctl) {
758 	case FC_RCTL_BA_ACC:
759 		break;
760 	case FC_RCTL_BA_RJT:
761 		brp = fc_frame_payload_get(fp, sizeof(*brp));
762 		if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
763 			break;
764 		/* fall thru */
765 	default:
766 		/*
767 		 * we will let the command timeout
768 		 * and scsi-ml recover in this case,
769 		 * therefore cleared the ba_done flag.
770 		 */
771 		ba_done = 0;
772 	}
773 
774 	if (ba_done)
775 		fc_fcp_abort_done(fsp);
776 }
777 
778 /**
779  * fc_fcp_recv() - Receive an FCP frame
780  * @seq: The sequence the frame is on
781  * @fp:	 The received frame
782  * @arg: The related FCP packet
783  *
784  * Context: Called from Soft IRQ context. Can not be called
785  *	    holding the FCP packet list lock.
786  */
787 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
788 {
789 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
790 	struct fc_lport *lport = fsp->lp;
791 	struct fc_frame_header *fh;
792 	struct fcp_txrdy *dd;
793 	u8 r_ctl;
794 	int rc = 0;
795 
796 	if (IS_ERR(fp)) {
797 		fc_fcp_error(fsp, fp);
798 		return;
799 	}
800 
801 	fh = fc_frame_header_get(fp);
802 	r_ctl = fh->fh_r_ctl;
803 
804 	if (lport->state != LPORT_ST_READY) {
805 		FC_FCP_DBG(fsp, "lport state %d, ignoring r_ctl %x\n",
806 			   lport->state, r_ctl);
807 		goto out;
808 	}
809 	if (fc_fcp_lock_pkt(fsp))
810 		goto out;
811 
812 	if (fh->fh_type == FC_TYPE_BLS) {
813 		fc_fcp_abts_resp(fsp, fp);
814 		goto unlock;
815 	}
816 
817 	if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING)) {
818 		FC_FCP_DBG(fsp, "command aborted, ignoring r_ctl %x\n", r_ctl);
819 		goto unlock;
820 	}
821 
822 	if (r_ctl == FC_RCTL_DD_DATA_DESC) {
823 		/*
824 		 * received XFER RDY from the target
825 		 * need to send data to the target
826 		 */
827 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
828 		dd = fc_frame_payload_get(fp, sizeof(*dd));
829 		WARN_ON(!dd);
830 
831 		rc = fc_fcp_send_data(fsp, seq,
832 				      (size_t) ntohl(dd->ft_data_ro),
833 				      (size_t) ntohl(dd->ft_burst_len));
834 		if (!rc)
835 			seq->rec_data = fsp->xfer_len;
836 	} else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
837 		/*
838 		 * received a DATA frame
839 		 * next we will copy the data to the system buffer
840 		 */
841 		WARN_ON(fr_len(fp) < sizeof(*fh));	/* len may be 0 */
842 		fc_fcp_recv_data(fsp, fp);
843 		seq->rec_data = fsp->xfer_contig_end;
844 	} else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
845 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
846 
847 		fc_fcp_resp(fsp, fp);
848 	} else {
849 		FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
850 	}
851 unlock:
852 	fc_fcp_unlock_pkt(fsp);
853 out:
854 	fc_frame_free(fp);
855 }
856 
857 /**
858  * fc_fcp_resp() - Handler for FCP responses
859  * @fsp: The FCP packet the response is for
860  * @fp:	 The response frame
861  */
862 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
863 {
864 	struct fc_frame_header *fh;
865 	struct fcp_resp *fc_rp;
866 	struct fcp_resp_ext *rp_ex;
867 	struct fcp_resp_rsp_info *fc_rp_info;
868 	u32 plen;
869 	u32 expected_len;
870 	u32 respl = 0;
871 	u32 snsl = 0;
872 	u8 flags = 0;
873 
874 	plen = fr_len(fp);
875 	fh = (struct fc_frame_header *)fr_hdr(fp);
876 	if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
877 		goto len_err;
878 	plen -= sizeof(*fh);
879 	fc_rp = (struct fcp_resp *)(fh + 1);
880 	fsp->cdb_status = fc_rp->fr_status;
881 	flags = fc_rp->fr_flags;
882 	fsp->scsi_comp_flags = flags;
883 	expected_len = fsp->data_len;
884 
885 	/* if ddp, update xfer len */
886 	fc_fcp_ddp_done(fsp);
887 
888 	if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
889 		rp_ex = (void *)(fc_rp + 1);
890 		if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
891 			if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
892 				goto len_err;
893 			fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
894 			if (flags & FCP_RSP_LEN_VAL) {
895 				respl = ntohl(rp_ex->fr_rsp_len);
896 				if ((respl != FCP_RESP_RSP_INFO_LEN4) &&
897 				    (respl != FCP_RESP_RSP_INFO_LEN8))
898 					goto len_err;
899 				if (fsp->wait_for_comp) {
900 					/* Abuse cdb_status for rsp code */
901 					fsp->cdb_status = fc_rp_info->rsp_code;
902 					complete(&fsp->tm_done);
903 					/*
904 					 * tmfs will not have any scsi cmd so
905 					 * exit here
906 					 */
907 					return;
908 				}
909 			}
910 			if (flags & FCP_SNS_LEN_VAL) {
911 				snsl = ntohl(rp_ex->fr_sns_len);
912 				if (snsl > SCSI_SENSE_BUFFERSIZE)
913 					snsl = SCSI_SENSE_BUFFERSIZE;
914 				memcpy(fsp->cmd->sense_buffer,
915 				       (char *)fc_rp_info + respl, snsl);
916 			}
917 		}
918 		if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
919 			if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
920 				goto len_err;
921 			if (flags & FCP_RESID_UNDER) {
922 				fsp->scsi_resid = ntohl(rp_ex->fr_resid);
923 				/*
924 				 * The cmnd->underflow is the minimum number of
925 				 * bytes that must be transferred for this
926 				 * command.  Provided a sense condition is not
927 				 * present, make sure the actual amount
928 				 * transferred is at least the underflow value
929 				 * or fail.
930 				 */
931 				if (!(flags & FCP_SNS_LEN_VAL) &&
932 				    (fc_rp->fr_status == 0) &&
933 				    (scsi_bufflen(fsp->cmd) -
934 				     fsp->scsi_resid) < fsp->cmd->underflow)
935 					goto err;
936 				expected_len -= fsp->scsi_resid;
937 			} else {
938 				fsp->status_code = FC_ERROR;
939 			}
940 		}
941 	}
942 	fsp->state |= FC_SRB_RCV_STATUS;
943 
944 	/*
945 	 * Check for missing or extra data frames.
946 	 */
947 	if (unlikely(fsp->cdb_status == SAM_STAT_GOOD &&
948 		     fsp->xfer_len != expected_len)) {
949 		if (fsp->xfer_len < expected_len) {
950 			/*
951 			 * Some data may be queued locally,
952 			 * Wait a at least one jiffy to see if it is delivered.
953 			 * If this expires without data, we may do SRR.
954 			 */
955 			if (fsp->lp->qfull) {
956 				FC_FCP_DBG(fsp, "tgt %6.6x queue busy retry\n",
957 					   fsp->rport->port_id);
958 				return;
959 			}
960 			FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx data underrun "
961 				   "len %x, data len %x\n",
962 				   fsp->rport->port_id,
963 				   fsp->xfer_len, expected_len, fsp->data_len);
964 			fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
965 			return;
966 		}
967 		fsp->status_code = FC_DATA_OVRRUN;
968 		FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
969 			   "len %x, data len %x\n",
970 			   fsp->rport->port_id,
971 			   fsp->xfer_len, expected_len, fsp->data_len);
972 	}
973 	fc_fcp_complete_locked(fsp);
974 	return;
975 
976 len_err:
977 	FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
978 		   "snsl %u\n", flags, fr_len(fp), respl, snsl);
979 err:
980 	fsp->status_code = FC_ERROR;
981 	fc_fcp_complete_locked(fsp);
982 }
983 
984 /**
985  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
986  *			      fcp_pkt lock held
987  * @fsp: The FCP packet to be completed
988  *
989  * This function may sleep if a timer is pending. The packet lock must be
990  * held, and the host lock must not be held.
991  */
992 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
993 {
994 	struct fc_lport *lport = fsp->lp;
995 	struct fc_seq *seq;
996 	struct fc_exch *ep;
997 	u32 f_ctl;
998 
999 	if (fsp->state & FC_SRB_ABORT_PENDING)
1000 		return;
1001 
1002 	if (fsp->state & FC_SRB_ABORTED) {
1003 		if (!fsp->status_code)
1004 			fsp->status_code = FC_CMD_ABORTED;
1005 	} else {
1006 		/*
1007 		 * Test for transport underrun, independent of response
1008 		 * underrun status.
1009 		 */
1010 		if (fsp->cdb_status == SAM_STAT_GOOD &&
1011 		    fsp->xfer_len < fsp->data_len && !fsp->io_status &&
1012 		    (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
1013 		     fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
1014 			FC_FCP_DBG(fsp, "data underrun, xfer %zx data %x\n",
1015 				    fsp->xfer_len, fsp->data_len);
1016 			fsp->status_code = FC_DATA_UNDRUN;
1017 		}
1018 	}
1019 
1020 	seq = fsp->seq_ptr;
1021 	if (seq) {
1022 		fsp->seq_ptr = NULL;
1023 		if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
1024 			struct fc_frame *conf_frame;
1025 			struct fc_seq *csp;
1026 
1027 			csp = lport->tt.seq_start_next(seq);
1028 			conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
1029 			if (conf_frame) {
1030 				f_ctl = FC_FC_SEQ_INIT;
1031 				f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
1032 				ep = fc_seq_exch(seq);
1033 				fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
1034 					       ep->did, ep->sid,
1035 					       FC_TYPE_FCP, f_ctl, 0);
1036 				lport->tt.seq_send(lport, csp, conf_frame);
1037 			}
1038 		}
1039 		lport->tt.exch_done(seq);
1040 	}
1041 	/*
1042 	 * Some resets driven by SCSI are not I/Os and do not have
1043 	 * SCSI commands associated with the requests. We should not
1044 	 * call I/O completion if we do not have a SCSI command.
1045 	 */
1046 	if (fsp->cmd)
1047 		fc_io_compl(fsp);
1048 }
1049 
1050 /**
1051  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
1052  * @fsp:   The FCP packet whose exchanges should be canceled
1053  * @error: The reason for the cancellation
1054  */
1055 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
1056 {
1057 	struct fc_lport *lport = fsp->lp;
1058 
1059 	if (fsp->seq_ptr) {
1060 		lport->tt.exch_done(fsp->seq_ptr);
1061 		fsp->seq_ptr = NULL;
1062 	}
1063 	fsp->status_code = error;
1064 }
1065 
1066 /**
1067  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1068  * @lport: The local port whose exchanges should be canceled
1069  * @id:	   The target's ID
1070  * @lun:   The LUN
1071  * @error: The reason for cancellation
1072  *
1073  * If lun or id is -1, they are ignored.
1074  */
1075 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1076 				    unsigned int lun, int error)
1077 {
1078 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1079 	struct fc_fcp_pkt *fsp;
1080 	struct scsi_cmnd *sc_cmd;
1081 	unsigned long flags;
1082 
1083 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1084 restart:
1085 	list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1086 		sc_cmd = fsp->cmd;
1087 		if (id != -1 && scmd_id(sc_cmd) != id)
1088 			continue;
1089 
1090 		if (lun != -1 && sc_cmd->device->lun != lun)
1091 			continue;
1092 
1093 		fc_fcp_pkt_hold(fsp);
1094 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1095 
1096 		spin_lock_bh(&fsp->scsi_pkt_lock);
1097 		if (!(fsp->state & FC_SRB_COMPL)) {
1098 			fsp->state |= FC_SRB_COMPL;
1099 			/*
1100 			 * TODO: dropping scsi_pkt_lock and then reacquiring
1101 			 * again around fc_fcp_cleanup_cmd() is required,
1102 			 * since fc_fcp_cleanup_cmd() calls into
1103 			 * fc_seq_set_resp() and that func preempts cpu using
1104 			 * schedule. May be schedule and related code should be
1105 			 * removed instead of unlocking here to avoid scheduling
1106 			 * while atomic bug.
1107 			 */
1108 			spin_unlock_bh(&fsp->scsi_pkt_lock);
1109 
1110 			fc_fcp_cleanup_cmd(fsp, error);
1111 
1112 			spin_lock_bh(&fsp->scsi_pkt_lock);
1113 			fc_io_compl(fsp);
1114 		}
1115 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1116 
1117 		fc_fcp_pkt_release(fsp);
1118 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1119 		/*
1120 		 * while we dropped the lock multiple pkts could
1121 		 * have been released, so we have to start over.
1122 		 */
1123 		goto restart;
1124 	}
1125 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1126 }
1127 
1128 /**
1129  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1130  * @lport: The local port whose exchanges are to be aborted
1131  */
1132 static void fc_fcp_abort_io(struct fc_lport *lport)
1133 {
1134 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1135 }
1136 
1137 /**
1138  * fc_fcp_pkt_send() - Send a fcp_pkt
1139  * @lport: The local port to send the FCP packet on
1140  * @fsp:   The FCP packet to send
1141  *
1142  * Return:  Zero for success and -1 for failure
1143  * Locks:   Called without locks held
1144  */
1145 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1146 {
1147 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1148 	unsigned long flags;
1149 	int rc;
1150 
1151 	fsp->cmd->SCp.ptr = (char *)fsp;
1152 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1153 	fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1154 
1155 	int_to_scsilun(fsp->cmd->device->lun, &fsp->cdb_cmd.fc_lun);
1156 	memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1157 
1158 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1159 	list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1160 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1161 	rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1162 	if (unlikely(rc)) {
1163 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1164 		fsp->cmd->SCp.ptr = NULL;
1165 		list_del(&fsp->list);
1166 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1167 	}
1168 
1169 	return rc;
1170 }
1171 
1172 /**
1173  * fc_fcp_cmd_send() - Send a FCP command
1174  * @lport: The local port to send the command on
1175  * @fsp:   The FCP packet the command is on
1176  * @resp:  The handler for the response
1177  */
1178 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1179 			   void (*resp)(struct fc_seq *,
1180 					struct fc_frame *fp,
1181 					void *arg))
1182 {
1183 	struct fc_frame *fp;
1184 	struct fc_seq *seq;
1185 	struct fc_rport *rport;
1186 	struct fc_rport_libfc_priv *rpriv;
1187 	const size_t len = sizeof(fsp->cdb_cmd);
1188 	int rc = 0;
1189 
1190 	if (fc_fcp_lock_pkt(fsp))
1191 		return 0;
1192 
1193 	fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1194 	if (!fp) {
1195 		rc = -1;
1196 		goto unlock;
1197 	}
1198 
1199 	memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1200 	fr_fsp(fp) = fsp;
1201 	rport = fsp->rport;
1202 	fsp->max_payload = rport->maxframe_size;
1203 	rpriv = rport->dd_data;
1204 
1205 	fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1206 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1207 		       FC_FCTL_REQ, 0);
1208 
1209 	seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1210 				      fsp, 0);
1211 	if (!seq) {
1212 		rc = -1;
1213 		goto unlock;
1214 	}
1215 	fsp->seq_ptr = seq;
1216 	fc_fcp_pkt_hold(fsp);	/* hold for fc_fcp_pkt_destroy */
1217 
1218 	setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1219 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1220 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1221 
1222 unlock:
1223 	fc_fcp_unlock_pkt(fsp);
1224 	return rc;
1225 }
1226 
1227 /**
1228  * fc_fcp_error() - Handler for FCP layer errors
1229  * @fsp: The FCP packet the error is on
1230  * @fp:	 The frame that has errored
1231  */
1232 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1233 {
1234 	int error = PTR_ERR(fp);
1235 
1236 	if (fc_fcp_lock_pkt(fsp))
1237 		return;
1238 
1239 	if (error == -FC_EX_CLOSED) {
1240 		fc_fcp_retry_cmd(fsp, FC_ERROR);
1241 		goto unlock;
1242 	}
1243 
1244 	/*
1245 	 * clear abort pending, because the lower layer
1246 	 * decided to force completion.
1247 	 */
1248 	fsp->state &= ~FC_SRB_ABORT_PENDING;
1249 	fsp->status_code = FC_CMD_PLOGO;
1250 	fc_fcp_complete_locked(fsp);
1251 unlock:
1252 	fc_fcp_unlock_pkt(fsp);
1253 }
1254 
1255 /**
1256  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1257  * @fsp:   The FCP packet to abort on
1258  *
1259  * Called to send an abort and then wait for abort completion
1260  */
1261 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1262 {
1263 	int rc = FAILED;
1264 	unsigned long ticks_left;
1265 
1266 	FC_FCP_DBG(fsp, "pkt abort state %x\n", fsp->state);
1267 	if (fc_fcp_send_abort(fsp)) {
1268 		FC_FCP_DBG(fsp, "failed to send abort\n");
1269 		return FAILED;
1270 	}
1271 
1272 	if (fsp->state & FC_SRB_ABORTED) {
1273 		FC_FCP_DBG(fsp, "target abort cmd  completed\n");
1274 		return SUCCESS;
1275 	}
1276 
1277 	init_completion(&fsp->tm_done);
1278 	fsp->wait_for_comp = 1;
1279 
1280 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1281 	ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1282 							FC_SCSI_TM_TOV);
1283 	spin_lock_bh(&fsp->scsi_pkt_lock);
1284 	fsp->wait_for_comp = 0;
1285 
1286 	if (!ticks_left) {
1287 		FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1288 	} else if (fsp->state & FC_SRB_ABORTED) {
1289 		FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1290 		rc = SUCCESS;
1291 		fc_fcp_complete_locked(fsp);
1292 	}
1293 
1294 	return rc;
1295 }
1296 
1297 /**
1298  * fc_lun_reset_send() - Send LUN reset command
1299  * @data: The FCP packet that identifies the LUN to be reset
1300  */
1301 static void fc_lun_reset_send(unsigned long data)
1302 {
1303 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1304 	struct fc_lport *lport = fsp->lp;
1305 
1306 	if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1307 		if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1308 			return;
1309 		if (fc_fcp_lock_pkt(fsp))
1310 			return;
1311 		setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1312 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1313 		fc_fcp_unlock_pkt(fsp);
1314 	}
1315 }
1316 
1317 /**
1318  * fc_lun_reset() - Send a LUN RESET command to a device
1319  *		    and wait for the reply
1320  * @lport: The local port to sent the command on
1321  * @fsp:   The FCP packet that identifies the LUN to be reset
1322  * @id:	   The SCSI command ID
1323  * @lun:   The LUN ID to be reset
1324  */
1325 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1326 			unsigned int id, unsigned int lun)
1327 {
1328 	int rc;
1329 
1330 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1331 	fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1332 	int_to_scsilun(lun, &fsp->cdb_cmd.fc_lun);
1333 
1334 	fsp->wait_for_comp = 1;
1335 	init_completion(&fsp->tm_done);
1336 
1337 	fc_lun_reset_send((unsigned long)fsp);
1338 
1339 	/*
1340 	 * wait for completion of reset
1341 	 * after that make sure all commands are terminated
1342 	 */
1343 	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1344 
1345 	spin_lock_bh(&fsp->scsi_pkt_lock);
1346 	fsp->state |= FC_SRB_COMPL;
1347 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1348 
1349 	del_timer_sync(&fsp->timer);
1350 
1351 	spin_lock_bh(&fsp->scsi_pkt_lock);
1352 	if (fsp->seq_ptr) {
1353 		lport->tt.exch_done(fsp->seq_ptr);
1354 		fsp->seq_ptr = NULL;
1355 	}
1356 	fsp->wait_for_comp = 0;
1357 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1358 
1359 	if (!rc) {
1360 		FC_SCSI_DBG(lport, "lun reset failed\n");
1361 		return FAILED;
1362 	}
1363 
1364 	/* cdb_status holds the tmf's rsp code */
1365 	if (fsp->cdb_status != FCP_TMF_CMPL)
1366 		return FAILED;
1367 
1368 	FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1369 	fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1370 	return SUCCESS;
1371 }
1372 
1373 /**
1374  * fc_tm_done() - Task Management response handler
1375  * @seq: The sequence that the response is on
1376  * @fp:	 The response frame
1377  * @arg: The FCP packet the response is for
1378  */
1379 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1380 {
1381 	struct fc_fcp_pkt *fsp = arg;
1382 	struct fc_frame_header *fh;
1383 
1384 	if (IS_ERR(fp)) {
1385 		/*
1386 		 * If there is an error just let it timeout or wait
1387 		 * for TMF to be aborted if it timedout.
1388 		 *
1389 		 * scsi-eh will escalate for when either happens.
1390 		 */
1391 		return;
1392 	}
1393 
1394 	if (fc_fcp_lock_pkt(fsp))
1395 		goto out;
1396 
1397 	/*
1398 	 * raced with eh timeout handler.
1399 	 */
1400 	if (!fsp->seq_ptr || !fsp->wait_for_comp)
1401 		goto out_unlock;
1402 
1403 	fh = fc_frame_header_get(fp);
1404 	if (fh->fh_type != FC_TYPE_BLS)
1405 		fc_fcp_resp(fsp, fp);
1406 	fsp->seq_ptr = NULL;
1407 	fsp->lp->tt.exch_done(seq);
1408 out_unlock:
1409 	fc_fcp_unlock_pkt(fsp);
1410 out:
1411 	fc_frame_free(fp);
1412 }
1413 
1414 /**
1415  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1416  * @lport: The local port to be cleaned up
1417  */
1418 static void fc_fcp_cleanup(struct fc_lport *lport)
1419 {
1420 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1421 }
1422 
1423 /**
1424  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1425  * @data: The FCP packet that has timed out
1426  *
1427  * If REC is supported then just issue it and return. The REC exchange will
1428  * complete or time out and recovery can continue at that point. Otherwise,
1429  * if the response has been received without all the data it has been
1430  * ER_TIMEOUT since the response was received. If the response has not been
1431  * received we see if data was received recently. If it has been then we
1432  * continue waiting, otherwise, we abort the command.
1433  */
1434 static void fc_fcp_timeout(unsigned long data)
1435 {
1436 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1437 	struct fc_rport *rport = fsp->rport;
1438 	struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1439 
1440 	if (fc_fcp_lock_pkt(fsp))
1441 		return;
1442 
1443 	if (fsp->cdb_cmd.fc_tm_flags)
1444 		goto unlock;
1445 
1446 	if (fsp->lp->qfull) {
1447 		FC_FCP_DBG(fsp, "fcp timeout, resetting timer delay %d\n",
1448 			   fsp->timer_delay);
1449 		setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1450 		fc_fcp_timer_set(fsp, fsp->timer_delay);
1451 		goto unlock;
1452 	}
1453 	FC_FCP_DBG(fsp, "fcp timeout, delay %d flags %x state %x\n",
1454 		   fsp->timer_delay, rpriv->flags, fsp->state);
1455 	fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1456 
1457 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1458 		fc_fcp_rec(fsp);
1459 	else if (fsp->state & FC_SRB_RCV_STATUS)
1460 		fc_fcp_complete_locked(fsp);
1461 	else
1462 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1463 	fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1464 unlock:
1465 	fc_fcp_unlock_pkt(fsp);
1466 }
1467 
1468 /**
1469  * fc_fcp_rec() - Send a REC ELS request
1470  * @fsp: The FCP packet to send the REC request on
1471  */
1472 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1473 {
1474 	struct fc_lport *lport;
1475 	struct fc_frame *fp;
1476 	struct fc_rport *rport;
1477 	struct fc_rport_libfc_priv *rpriv;
1478 
1479 	lport = fsp->lp;
1480 	rport = fsp->rport;
1481 	rpriv = rport->dd_data;
1482 	if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1483 		fsp->status_code = FC_HRD_ERROR;
1484 		fsp->io_status = 0;
1485 		fc_fcp_complete_locked(fsp);
1486 		return;
1487 	}
1488 
1489 	fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1490 	if (!fp)
1491 		goto retry;
1492 
1493 	fr_seq(fp) = fsp->seq_ptr;
1494 	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1495 		       rpriv->local_port->port_id, FC_TYPE_ELS,
1496 		       FC_FCTL_REQ, 0);
1497 	if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1498 				 fc_fcp_rec_resp, fsp,
1499 				 2 * lport->r_a_tov)) {
1500 		fc_fcp_pkt_hold(fsp);		/* hold while REC outstanding */
1501 		return;
1502 	}
1503 retry:
1504 	if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1505 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1506 	else
1507 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1508 }
1509 
1510 /**
1511  * fc_fcp_rec_resp() - Handler for REC ELS responses
1512  * @seq: The sequence the response is on
1513  * @fp:	 The response frame
1514  * @arg: The FCP packet the response is on
1515  *
1516  * If the response is a reject then the scsi layer will handle
1517  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1518  * set the timeout and return. If the I/O was completed then complete the
1519  * exchange and tell the SCSI layer.
1520  */
1521 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1522 {
1523 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1524 	struct fc_els_rec_acc *recp;
1525 	struct fc_els_ls_rjt *rjt;
1526 	u32 e_stat;
1527 	u8 opcode;
1528 	u32 offset;
1529 	enum dma_data_direction data_dir;
1530 	enum fc_rctl r_ctl;
1531 	struct fc_rport_libfc_priv *rpriv;
1532 
1533 	if (IS_ERR(fp)) {
1534 		fc_fcp_rec_error(fsp, fp);
1535 		return;
1536 	}
1537 
1538 	if (fc_fcp_lock_pkt(fsp))
1539 		goto out;
1540 
1541 	fsp->recov_retry = 0;
1542 	opcode = fc_frame_payload_op(fp);
1543 	if (opcode == ELS_LS_RJT) {
1544 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1545 		switch (rjt->er_reason) {
1546 		default:
1547 			FC_FCP_DBG(fsp,
1548 				   "device %x invalid REC reject %d/%d\n",
1549 				   fsp->rport->port_id, rjt->er_reason,
1550 				   rjt->er_explan);
1551 			/* fall through */
1552 		case ELS_RJT_UNSUP:
1553 			FC_FCP_DBG(fsp, "device does not support REC\n");
1554 			rpriv = fsp->rport->dd_data;
1555 			/*
1556 			 * if we do not spport RECs or got some bogus
1557 			 * reason then resetup timer so we check for
1558 			 * making progress.
1559 			 */
1560 			rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1561 			break;
1562 		case ELS_RJT_LOGIC:
1563 		case ELS_RJT_UNAB:
1564 			FC_FCP_DBG(fsp, "device %x REC reject %d/%d\n",
1565 				   fsp->rport->port_id, rjt->er_reason,
1566 				   rjt->er_explan);
1567 			/*
1568 			 * If response got lost or is stuck in the
1569 			 * queue somewhere we have no idea if and when
1570 			 * the response will be received. So quarantine
1571 			 * the xid and retry the command.
1572 			 */
1573 			if (rjt->er_explan == ELS_EXPL_OXID_RXID) {
1574 				struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1575 				ep->state |= FC_EX_QUARANTINE;
1576 				fsp->state |= FC_SRB_ABORTED;
1577 				fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1578 				break;
1579 			}
1580 			fc_fcp_recovery(fsp, FC_TRANS_RESET);
1581 			break;
1582 		}
1583 	} else if (opcode == ELS_LS_ACC) {
1584 		if (fsp->state & FC_SRB_ABORTED)
1585 			goto unlock_out;
1586 
1587 		data_dir = fsp->cmd->sc_data_direction;
1588 		recp = fc_frame_payload_get(fp, sizeof(*recp));
1589 		offset = ntohl(recp->reca_fc4value);
1590 		e_stat = ntohl(recp->reca_e_stat);
1591 
1592 		if (e_stat & ESB_ST_COMPLETE) {
1593 
1594 			/*
1595 			 * The exchange is complete.
1596 			 *
1597 			 * For output, we must've lost the response.
1598 			 * For input, all data must've been sent.
1599 			 * We lost may have lost the response
1600 			 * (and a confirmation was requested) and maybe
1601 			 * some data.
1602 			 *
1603 			 * If all data received, send SRR
1604 			 * asking for response.	 If partial data received,
1605 			 * or gaps, SRR requests data at start of gap.
1606 			 * Recovery via SRR relies on in-order-delivery.
1607 			 */
1608 			if (data_dir == DMA_TO_DEVICE) {
1609 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1610 			} else if (fsp->xfer_contig_end == offset) {
1611 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1612 			} else {
1613 				offset = fsp->xfer_contig_end;
1614 				r_ctl = FC_RCTL_DD_SOL_DATA;
1615 			}
1616 			fc_fcp_srr(fsp, r_ctl, offset);
1617 		} else if (e_stat & ESB_ST_SEQ_INIT) {
1618 			/*
1619 			 * The remote port has the initiative, so just
1620 			 * keep waiting for it to complete.
1621 			 */
1622 			fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1623 		} else {
1624 
1625 			/*
1626 			 * The exchange is incomplete, we have seq. initiative.
1627 			 * Lost response with requested confirmation,
1628 			 * lost confirmation, lost transfer ready or
1629 			 * lost write data.
1630 			 *
1631 			 * For output, if not all data was received, ask
1632 			 * for transfer ready to be repeated.
1633 			 *
1634 			 * If we received or sent all the data, send SRR to
1635 			 * request response.
1636 			 *
1637 			 * If we lost a response, we may have lost some read
1638 			 * data as well.
1639 			 */
1640 			r_ctl = FC_RCTL_DD_SOL_DATA;
1641 			if (data_dir == DMA_TO_DEVICE) {
1642 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1643 				if (offset < fsp->data_len)
1644 					r_ctl = FC_RCTL_DD_DATA_DESC;
1645 			} else if (offset == fsp->xfer_contig_end) {
1646 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1647 			} else if (fsp->xfer_contig_end < offset) {
1648 				offset = fsp->xfer_contig_end;
1649 			}
1650 			fc_fcp_srr(fsp, r_ctl, offset);
1651 		}
1652 	}
1653 unlock_out:
1654 	fc_fcp_unlock_pkt(fsp);
1655 out:
1656 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1657 	fc_frame_free(fp);
1658 }
1659 
1660 /**
1661  * fc_fcp_rec_error() - Handler for REC errors
1662  * @fsp: The FCP packet the error is on
1663  * @fp:	 The REC frame
1664  */
1665 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1666 {
1667 	int error = PTR_ERR(fp);
1668 
1669 	if (fc_fcp_lock_pkt(fsp))
1670 		goto out;
1671 
1672 	switch (error) {
1673 	case -FC_EX_CLOSED:
1674 		FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange closed\n",
1675 			   fsp, fsp->rport->port_id);
1676 		fc_fcp_retry_cmd(fsp, FC_ERROR);
1677 		break;
1678 
1679 	default:
1680 		FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1681 			   fsp, fsp->rport->port_id, error);
1682 		fsp->status_code = FC_CMD_PLOGO;
1683 		/* fall through */
1684 
1685 	case -FC_EX_TIMEOUT:
1686 		/*
1687 		 * Assume REC or LS_ACC was lost.
1688 		 * The exchange manager will have aborted REC, so retry.
1689 		 */
1690 		FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange timeout retry %d/%d\n",
1691 			   fsp, fsp->rport->port_id, fsp->recov_retry,
1692 			   FC_MAX_RECOV_RETRY);
1693 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1694 			fc_fcp_rec(fsp);
1695 		else
1696 			fc_fcp_recovery(fsp, FC_ERROR);
1697 		break;
1698 	}
1699 	fc_fcp_unlock_pkt(fsp);
1700 out:
1701 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1702 }
1703 
1704 /**
1705  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1706  * @fsp: The FCP pkt that needs to be aborted
1707  */
1708 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1709 {
1710 	FC_FCP_DBG(fsp, "start recovery code %x\n", code);
1711 	fsp->status_code = code;
1712 	fsp->cdb_status = 0;
1713 	fsp->io_status = 0;
1714 	/*
1715 	 * if this fails then we let the scsi command timer fire and
1716 	 * scsi-ml escalate.
1717 	 */
1718 	fc_fcp_send_abort(fsp);
1719 }
1720 
1721 /**
1722  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1723  * @fsp:   The FCP packet the SRR is to be sent on
1724  * @r_ctl: The R_CTL field for the SRR request
1725  * This is called after receiving status but insufficient data, or
1726  * when expecting status but the request has timed out.
1727  */
1728 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1729 {
1730 	struct fc_lport *lport = fsp->lp;
1731 	struct fc_rport *rport;
1732 	struct fc_rport_libfc_priv *rpriv;
1733 	struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1734 	struct fc_seq *seq;
1735 	struct fcp_srr *srr;
1736 	struct fc_frame *fp;
1737 
1738 	rport = fsp->rport;
1739 	rpriv = rport->dd_data;
1740 
1741 	if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1742 	    rpriv->rp_state != RPORT_ST_READY)
1743 		goto retry;			/* shouldn't happen */
1744 	fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1745 	if (!fp)
1746 		goto retry;
1747 
1748 	srr = fc_frame_payload_get(fp, sizeof(*srr));
1749 	memset(srr, 0, sizeof(*srr));
1750 	srr->srr_op = ELS_SRR;
1751 	srr->srr_ox_id = htons(ep->oxid);
1752 	srr->srr_rx_id = htons(ep->rxid);
1753 	srr->srr_r_ctl = r_ctl;
1754 	srr->srr_rel_off = htonl(offset);
1755 
1756 	fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1757 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1758 		       FC_FCTL_REQ, 0);
1759 
1760 	seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp,
1761 				      fc_fcp_pkt_destroy,
1762 				      fsp, get_fsp_rec_tov(fsp));
1763 	if (!seq)
1764 		goto retry;
1765 
1766 	fsp->recov_seq = seq;
1767 	fsp->xfer_len = offset;
1768 	fsp->xfer_contig_end = offset;
1769 	fsp->state &= ~FC_SRB_RCV_STATUS;
1770 	fc_fcp_pkt_hold(fsp);		/* hold for outstanding SRR */
1771 	return;
1772 retry:
1773 	fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1774 }
1775 
1776 /**
1777  * fc_fcp_srr_resp() - Handler for SRR response
1778  * @seq: The sequence the SRR is on
1779  * @fp:	 The SRR frame
1780  * @arg: The FCP packet the SRR is on
1781  */
1782 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1783 {
1784 	struct fc_fcp_pkt *fsp = arg;
1785 	struct fc_frame_header *fh;
1786 
1787 	if (IS_ERR(fp)) {
1788 		fc_fcp_srr_error(fsp, fp);
1789 		return;
1790 	}
1791 
1792 	if (fc_fcp_lock_pkt(fsp))
1793 		goto out;
1794 
1795 	fh = fc_frame_header_get(fp);
1796 	/*
1797 	 * BUG? fc_fcp_srr_error calls exch_done which would release
1798 	 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1799 	 * then fc_exch_timeout would be sending an abort. The exch_done
1800 	 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1801 	 * an abort response though.
1802 	 */
1803 	if (fh->fh_type == FC_TYPE_BLS) {
1804 		fc_fcp_unlock_pkt(fsp);
1805 		return;
1806 	}
1807 
1808 	switch (fc_frame_payload_op(fp)) {
1809 	case ELS_LS_ACC:
1810 		fsp->recov_retry = 0;
1811 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1812 		break;
1813 	case ELS_LS_RJT:
1814 	default:
1815 		fc_fcp_recovery(fsp, FC_ERROR);
1816 		break;
1817 	}
1818 	fc_fcp_unlock_pkt(fsp);
1819 out:
1820 	fsp->lp->tt.exch_done(seq);
1821 	fc_frame_free(fp);
1822 }
1823 
1824 /**
1825  * fc_fcp_srr_error() - Handler for SRR errors
1826  * @fsp: The FCP packet that the SRR error is on
1827  * @fp:	 The SRR frame
1828  */
1829 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1830 {
1831 	if (fc_fcp_lock_pkt(fsp))
1832 		goto out;
1833 	switch (PTR_ERR(fp)) {
1834 	case -FC_EX_TIMEOUT:
1835 		FC_FCP_DBG(fsp, "SRR timeout, retries %d\n", fsp->recov_retry);
1836 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1837 			fc_fcp_rec(fsp);
1838 		else
1839 			fc_fcp_recovery(fsp, FC_TIMED_OUT);
1840 		break;
1841 	case -FC_EX_CLOSED:			/* e.g., link failure */
1842 		FC_FCP_DBG(fsp, "SRR error, exchange closed\n");
1843 		/* fall through */
1844 	default:
1845 		fc_fcp_retry_cmd(fsp, FC_ERROR);
1846 		break;
1847 	}
1848 	fc_fcp_unlock_pkt(fsp);
1849 out:
1850 	fsp->lp->tt.exch_done(fsp->recov_seq);
1851 }
1852 
1853 /**
1854  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1855  * @lport: The local port to be checked
1856  */
1857 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1858 {
1859 	/* lock ? */
1860 	return (lport->state == LPORT_ST_READY) &&
1861 		lport->link_up && !lport->qfull;
1862 }
1863 
1864 /**
1865  * fc_queuecommand() - The queuecommand function of the SCSI template
1866  * @shost: The Scsi_Host that the command was issued to
1867  * @cmd:   The scsi_cmnd to be executed
1868  *
1869  * This is the i/o strategy routine, called by the SCSI layer.
1870  */
1871 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1872 {
1873 	struct fc_lport *lport = shost_priv(shost);
1874 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1875 	struct fc_fcp_pkt *fsp;
1876 	struct fc_rport_libfc_priv *rpriv;
1877 	int rval;
1878 	int rc = 0;
1879 	struct fc_stats *stats;
1880 
1881 	rval = fc_remote_port_chkready(rport);
1882 	if (rval) {
1883 		sc_cmd->result = rval;
1884 		sc_cmd->scsi_done(sc_cmd);
1885 		return 0;
1886 	}
1887 
1888 	if (!*(struct fc_remote_port **)rport->dd_data) {
1889 		/*
1890 		 * rport is transitioning from blocked/deleted to
1891 		 * online
1892 		 */
1893 		sc_cmd->result = DID_IMM_RETRY << 16;
1894 		sc_cmd->scsi_done(sc_cmd);
1895 		goto out;
1896 	}
1897 
1898 	rpriv = rport->dd_data;
1899 
1900 	if (!fc_fcp_lport_queue_ready(lport)) {
1901 		if (lport->qfull) {
1902 			fc_fcp_can_queue_ramp_down(lport);
1903 			shost_printk(KERN_ERR, lport->host,
1904 				     "libfc: queue full, "
1905 				     "reducing can_queue to %d.\n",
1906 				     lport->host->can_queue);
1907 		}
1908 		rc = SCSI_MLQUEUE_HOST_BUSY;
1909 		goto out;
1910 	}
1911 
1912 	fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1913 	if (fsp == NULL) {
1914 		rc = SCSI_MLQUEUE_HOST_BUSY;
1915 		goto out;
1916 	}
1917 
1918 	/*
1919 	 * build the libfc request pkt
1920 	 */
1921 	fsp->cmd = sc_cmd;	/* save the cmd */
1922 	fsp->rport = rport;	/* set the remote port ptr */
1923 
1924 	/*
1925 	 * set up the transfer length
1926 	 */
1927 	fsp->data_len = scsi_bufflen(sc_cmd);
1928 	fsp->xfer_len = 0;
1929 
1930 	/*
1931 	 * setup the data direction
1932 	 */
1933 	stats = per_cpu_ptr(lport->stats, get_cpu());
1934 	if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1935 		fsp->req_flags = FC_SRB_READ;
1936 		stats->InputRequests++;
1937 		stats->InputBytes += fsp->data_len;
1938 	} else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1939 		fsp->req_flags = FC_SRB_WRITE;
1940 		stats->OutputRequests++;
1941 		stats->OutputBytes += fsp->data_len;
1942 	} else {
1943 		fsp->req_flags = 0;
1944 		stats->ControlRequests++;
1945 	}
1946 	put_cpu();
1947 
1948 	/*
1949 	 * send it to the lower layer
1950 	 * if we get -1 return then put the request in the pending
1951 	 * queue.
1952 	 */
1953 	rval = fc_fcp_pkt_send(lport, fsp);
1954 	if (rval != 0) {
1955 		fsp->state = FC_SRB_FREE;
1956 		fc_fcp_pkt_release(fsp);
1957 		rc = SCSI_MLQUEUE_HOST_BUSY;
1958 	}
1959 out:
1960 	return rc;
1961 }
1962 EXPORT_SYMBOL(fc_queuecommand);
1963 
1964 /**
1965  * fc_io_compl() - Handle responses for completed commands
1966  * @fsp: The FCP packet that is complete
1967  *
1968  * Translates fcp_pkt errors to a Linux SCSI errors.
1969  * The fcp packet lock must be held when calling.
1970  */
1971 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1972 {
1973 	struct fc_fcp_internal *si;
1974 	struct scsi_cmnd *sc_cmd;
1975 	struct fc_lport *lport;
1976 	unsigned long flags;
1977 
1978 	/* release outstanding ddp context */
1979 	fc_fcp_ddp_done(fsp);
1980 
1981 	fsp->state |= FC_SRB_COMPL;
1982 	if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1983 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1984 		del_timer_sync(&fsp->timer);
1985 		spin_lock_bh(&fsp->scsi_pkt_lock);
1986 	}
1987 
1988 	lport = fsp->lp;
1989 	si = fc_get_scsi_internal(lport);
1990 
1991 	/*
1992 	 * if can_queue ramp down is done then try can_queue ramp up
1993 	 * since commands are completing now.
1994 	 */
1995 	if (si->last_can_queue_ramp_down_time)
1996 		fc_fcp_can_queue_ramp_up(lport);
1997 
1998 	sc_cmd = fsp->cmd;
1999 	CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
2000 	switch (fsp->status_code) {
2001 	case FC_COMPLETE:
2002 		if (fsp->cdb_status == 0) {
2003 			/*
2004 			 * good I/O status
2005 			 */
2006 			sc_cmd->result = DID_OK << 16;
2007 			if (fsp->scsi_resid)
2008 				CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
2009 		} else {
2010 			/*
2011 			 * transport level I/O was ok but scsi
2012 			 * has non zero status
2013 			 */
2014 			sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
2015 		}
2016 		break;
2017 	case FC_ERROR:
2018 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2019 			   "due to FC_ERROR\n");
2020 		sc_cmd->result = DID_ERROR << 16;
2021 		break;
2022 	case FC_DATA_UNDRUN:
2023 		if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
2024 			/*
2025 			 * scsi status is good but transport level
2026 			 * underrun.
2027 			 */
2028 			if (fsp->state & FC_SRB_RCV_STATUS) {
2029 				sc_cmd->result = DID_OK << 16;
2030 			} else {
2031 				FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
2032 					   " due to FC_DATA_UNDRUN (trans)\n");
2033 				sc_cmd->result = DID_ERROR << 16;
2034 			}
2035 		} else {
2036 			/*
2037 			 * scsi got underrun, this is an error
2038 			 */
2039 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2040 				   "due to FC_DATA_UNDRUN (scsi)\n");
2041 			CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
2042 			sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2043 		}
2044 		break;
2045 	case FC_DATA_OVRRUN:
2046 		/*
2047 		 * overrun is an error
2048 		 */
2049 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2050 			   "due to FC_DATA_OVRRUN\n");
2051 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2052 		break;
2053 	case FC_CMD_ABORTED:
2054 		if (host_byte(sc_cmd->result) == DID_TIME_OUT)
2055 			FC_FCP_DBG(fsp, "Returning DID_TIME_OUT to scsi-ml "
2056 				   "due to FC_CMD_ABORTED\n");
2057 		else {
2058 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2059 				   "due to FC_CMD_ABORTED\n");
2060 			set_host_byte(sc_cmd, DID_ERROR);
2061 		}
2062 		sc_cmd->result |= fsp->io_status;
2063 		break;
2064 	case FC_CMD_RESET:
2065 		FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
2066 			   "due to FC_CMD_RESET\n");
2067 		sc_cmd->result = (DID_RESET << 16);
2068 		break;
2069 	case FC_TRANS_RESET:
2070 		FC_FCP_DBG(fsp, "Returning DID_SOFT_ERROR to scsi-ml "
2071 			   "due to FC_TRANS_RESET\n");
2072 		sc_cmd->result = (DID_SOFT_ERROR << 16);
2073 		break;
2074 	case FC_HRD_ERROR:
2075 		FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
2076 			   "due to FC_HRD_ERROR\n");
2077 		sc_cmd->result = (DID_NO_CONNECT << 16);
2078 		break;
2079 	case FC_CRC_ERROR:
2080 		FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
2081 			   "due to FC_CRC_ERROR\n");
2082 		sc_cmd->result = (DID_PARITY << 16);
2083 		break;
2084 	case FC_TIMED_OUT:
2085 		FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
2086 			   "due to FC_TIMED_OUT\n");
2087 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
2088 		break;
2089 	default:
2090 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2091 			   "due to unknown error\n");
2092 		sc_cmd->result = (DID_ERROR << 16);
2093 		break;
2094 	}
2095 
2096 	if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2097 		sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2098 
2099 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2100 	list_del(&fsp->list);
2101 	sc_cmd->SCp.ptr = NULL;
2102 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2103 	sc_cmd->scsi_done(sc_cmd);
2104 
2105 	/* release ref from initial allocation in queue command */
2106 	fc_fcp_pkt_release(fsp);
2107 }
2108 
2109 /**
2110  * fc_eh_abort() - Abort a command
2111  * @sc_cmd: The SCSI command to abort
2112  *
2113  * From SCSI host template.
2114  * Send an ABTS to the target device and wait for the response.
2115  */
2116 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2117 {
2118 	struct fc_fcp_pkt *fsp;
2119 	struct fc_lport *lport;
2120 	struct fc_fcp_internal *si;
2121 	int rc = FAILED;
2122 	unsigned long flags;
2123 	int rval;
2124 
2125 	rval = fc_block_scsi_eh(sc_cmd);
2126 	if (rval)
2127 		return rval;
2128 
2129 	lport = shost_priv(sc_cmd->device->host);
2130 	if (lport->state != LPORT_ST_READY)
2131 		return rc;
2132 	else if (!lport->link_up)
2133 		return rc;
2134 
2135 	si = fc_get_scsi_internal(lport);
2136 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2137 	fsp = CMD_SP(sc_cmd);
2138 	if (!fsp) {
2139 		/* command completed while scsi eh was setting up */
2140 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2141 		return SUCCESS;
2142 	}
2143 	/* grab a ref so the fsp and sc_cmd cannot be released from under us */
2144 	fc_fcp_pkt_hold(fsp);
2145 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2146 
2147 	if (fc_fcp_lock_pkt(fsp)) {
2148 		/* completed while we were waiting for timer to be deleted */
2149 		rc = SUCCESS;
2150 		goto release_pkt;
2151 	}
2152 
2153 	rc = fc_fcp_pkt_abort(fsp);
2154 	fc_fcp_unlock_pkt(fsp);
2155 
2156 release_pkt:
2157 	fc_fcp_pkt_release(fsp);
2158 	return rc;
2159 }
2160 EXPORT_SYMBOL(fc_eh_abort);
2161 
2162 /**
2163  * fc_eh_device_reset() - Reset a single LUN
2164  * @sc_cmd: The SCSI command which identifies the device whose
2165  *	    LUN is to be reset
2166  *
2167  * Set from SCSI host template.
2168  */
2169 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2170 {
2171 	struct fc_lport *lport;
2172 	struct fc_fcp_pkt *fsp;
2173 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2174 	int rc = FAILED;
2175 	int rval;
2176 
2177 	rval = fc_block_scsi_eh(sc_cmd);
2178 	if (rval)
2179 		return rval;
2180 
2181 	lport = shost_priv(sc_cmd->device->host);
2182 
2183 	if (lport->state != LPORT_ST_READY)
2184 		return rc;
2185 
2186 	FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2187 
2188 	fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2189 	if (fsp == NULL) {
2190 		printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2191 		goto out;
2192 	}
2193 
2194 	/*
2195 	 * Build the libfc request pkt. Do not set the scsi cmnd, because
2196 	 * the sc passed in is not setup for execution like when sent
2197 	 * through the queuecommand callout.
2198 	 */
2199 	fsp->rport = rport;	/* set the remote port ptr */
2200 
2201 	/*
2202 	 * flush outstanding commands
2203 	 */
2204 	rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2205 	fsp->state = FC_SRB_FREE;
2206 	fc_fcp_pkt_release(fsp);
2207 
2208 out:
2209 	return rc;
2210 }
2211 EXPORT_SYMBOL(fc_eh_device_reset);
2212 
2213 /**
2214  * fc_eh_host_reset() - Reset a Scsi_Host.
2215  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2216  */
2217 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2218 {
2219 	struct Scsi_Host *shost = sc_cmd->device->host;
2220 	struct fc_lport *lport = shost_priv(shost);
2221 	unsigned long wait_tmo;
2222 
2223 	FC_SCSI_DBG(lport, "Resetting host\n");
2224 
2225 	fc_block_scsi_eh(sc_cmd);
2226 
2227 	fc_lport_reset(lport);
2228 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2229 	while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2230 							       wait_tmo))
2231 		msleep(1000);
2232 
2233 	if (fc_fcp_lport_queue_ready(lport)) {
2234 		shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2235 			     "on port (%6.6x)\n", lport->port_id);
2236 		return SUCCESS;
2237 	} else {
2238 		shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2239 			     "port (%6.6x) is not ready.\n",
2240 			     lport->port_id);
2241 		return FAILED;
2242 	}
2243 }
2244 EXPORT_SYMBOL(fc_eh_host_reset);
2245 
2246 /**
2247  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2248  * @sdev: The SCSI device that identifies the SCSI host
2249  *
2250  * Configures queue depth based on host's cmd_per_len. If not set
2251  * then we use the libfc default.
2252  */
2253 int fc_slave_alloc(struct scsi_device *sdev)
2254 {
2255 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2256 
2257 	if (!rport || fc_remote_port_chkready(rport))
2258 		return -ENXIO;
2259 
2260 	scsi_change_queue_depth(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2261 	return 0;
2262 }
2263 EXPORT_SYMBOL(fc_slave_alloc);
2264 
2265 /**
2266  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2267  * @lport: The local port that no longer needs the FCP layer
2268  */
2269 void fc_fcp_destroy(struct fc_lport *lport)
2270 {
2271 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2272 
2273 	if (!list_empty(&si->scsi_pkt_queue))
2274 		printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2275 		       "port (%6.6x)\n", lport->port_id);
2276 
2277 	mempool_destroy(si->scsi_pkt_pool);
2278 	kfree(si);
2279 	lport->scsi_priv = NULL;
2280 }
2281 EXPORT_SYMBOL(fc_fcp_destroy);
2282 
2283 int fc_setup_fcp(void)
2284 {
2285 	int rc = 0;
2286 
2287 	scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2288 					    sizeof(struct fc_fcp_pkt),
2289 					    0, SLAB_HWCACHE_ALIGN, NULL);
2290 	if (!scsi_pkt_cachep) {
2291 		printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2292 		       "module load failed!");
2293 		rc = -ENOMEM;
2294 	}
2295 
2296 	return rc;
2297 }
2298 
2299 void fc_destroy_fcp(void)
2300 {
2301 	if (scsi_pkt_cachep)
2302 		kmem_cache_destroy(scsi_pkt_cachep);
2303 }
2304 
2305 /**
2306  * fc_fcp_init() - Initialize the FCP layer for a local port
2307  * @lport: The local port to initialize the exchange layer for
2308  */
2309 int fc_fcp_init(struct fc_lport *lport)
2310 {
2311 	int rc;
2312 	struct fc_fcp_internal *si;
2313 
2314 	if (!lport->tt.fcp_cmd_send)
2315 		lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2316 
2317 	if (!lport->tt.fcp_cleanup)
2318 		lport->tt.fcp_cleanup = fc_fcp_cleanup;
2319 
2320 	if (!lport->tt.fcp_abort_io)
2321 		lport->tt.fcp_abort_io = fc_fcp_abort_io;
2322 
2323 	si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2324 	if (!si)
2325 		return -ENOMEM;
2326 	lport->scsi_priv = si;
2327 	si->max_can_queue = lport->host->can_queue;
2328 	INIT_LIST_HEAD(&si->scsi_pkt_queue);
2329 	spin_lock_init(&si->scsi_queue_lock);
2330 
2331 	si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2332 	if (!si->scsi_pkt_pool) {
2333 		rc = -ENOMEM;
2334 		goto free_internal;
2335 	}
2336 	return 0;
2337 
2338 free_internal:
2339 	kfree(si);
2340 	return rc;
2341 }
2342 EXPORT_SYMBOL(fc_fcp_init);
2343