1 /*
2  * This file is provided under a dual BSD/GPLv2 license.  When using or
3  * redistributing this file, you may do so under either license.
4  *
5  * GPL LICENSE SUMMARY
6  *
7  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of version 2 of the GNU General Public License as
11  * published by the Free Software Foundation.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16  * General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21  * The full GNU General Public License is included in this distribution
22  * in the file called LICENSE.GPL.
23  *
24  * BSD LICENSE
25  *
26  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27  * All rights reserved.
28  *
29  * Redistribution and use in source and binary forms, with or without
30  * modification, are permitted provided that the following conditions
31  * are met:
32  *
33  *   * Redistributions of source code must retain the above copyright
34  *     notice, this list of conditions and the following disclaimer.
35  *   * Redistributions in binary form must reproduce the above copyright
36  *     notice, this list of conditions and the following disclaimer in
37  *     the documentation and/or other materials provided with the
38  *     distribution.
39  *   * Neither the name of Intel Corporation nor the names of its
40  *     contributors may be used to endorse or promote products derived
41  *     from this software without specific prior written permission.
42  *
43  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
54  */
55 
56 #ifndef _ISCI_REMOTE_DEVICE_H_
57 #define _ISCI_REMOTE_DEVICE_H_
58 #include <scsi/libsas.h>
59 #include <linux/kref.h>
60 #include "scu_remote_node_context.h"
61 #include "remote_node_context.h"
62 #include "port.h"
63 
64 enum sci_remote_device_not_ready_reason_code {
65 	SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED,
66 	SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED,
67 	SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED,
68 	SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED,
69 	SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED,
70 	SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX
71 };
72 
73 /**
74  * isci_remote_device - isci representation of a sas expander / end point
75  * @device_port_width: hw setting for number of simultaneous connections
76  * @connection_rate: per-taskcontext connection rate for this device
77  * @working_request: SATA requests have no tag we for unaccelerated
78  *                   protocols we need a method to associate unsolicited
79  *                   frames with a pending request
80  */
81 struct isci_remote_device {
82 	#define IDEV_START_PENDING 0
83 	#define IDEV_STOP_PENDING 1
84 	#define IDEV_ALLOCATED 2
85 	#define IDEV_GONE 3
86 	#define IDEV_IO_READY 4
87 	#define IDEV_IO_NCQERROR 5
88 	#define IDEV_RNC_LLHANG_ENABLED 6
89 	#define IDEV_ABORT_PATH_ACTIVE 7
90 	#define IDEV_ABORT_PATH_RESUME_PENDING 8
91 	unsigned long flags;
92 	struct kref kref;
93 	struct isci_port *isci_port;
94 	struct domain_device *domain_dev;
95 	struct list_head node;
96 	struct sci_base_state_machine sm;
97 	u32 device_port_width;
98 	enum sas_linkrate connection_rate;
99 	struct isci_port *owning_port;
100 	struct sci_remote_node_context rnc;
101 	/* XXX unify with device reference counting and delete */
102 	u32 started_request_count;
103 	struct isci_request *working_request;
104 	u32 not_ready_reason;
105 	scics_sds_remote_node_context_callback abort_resume_cb;
106 	void *abort_resume_cbparam;
107 };
108 
109 #define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000
110 
111 /* device reference routines must be called under sci_lock */
112 static inline struct isci_remote_device *isci_get_device(
113 	struct isci_remote_device *idev)
114 {
115 	if (idev)
116 		kref_get(&idev->kref);
117 	return idev;
118 }
119 
120 static inline struct isci_remote_device *isci_lookup_device(struct domain_device *dev)
121 {
122 	struct isci_remote_device *idev = dev->lldd_dev;
123 
124 	if (idev && !test_bit(IDEV_GONE, &idev->flags)) {
125 		kref_get(&idev->kref);
126 		return idev;
127 	}
128 
129 	return NULL;
130 }
131 
132 void isci_remote_device_release(struct kref *kref);
133 static inline void isci_put_device(struct isci_remote_device *idev)
134 {
135 	if (idev)
136 		kref_put(&idev->kref, isci_remote_device_release);
137 }
138 
139 enum sci_status isci_remote_device_stop(struct isci_host *ihost,
140 					struct isci_remote_device *idev);
141 void isci_remote_device_nuke_requests(struct isci_host *ihost,
142 				      struct isci_remote_device *idev);
143 void isci_remote_device_gone(struct domain_device *domain_dev);
144 int isci_remote_device_found(struct domain_device *domain_dev);
145 
146 /**
147  * sci_remote_device_stop() - This method will stop both transmission and
148  *    reception of link activity for the supplied remote device.  This method
149  *    disables normal IO requests from flowing through to the remote device.
150  * @remote_device: This parameter specifies the device to be stopped.
151  * @timeout: This parameter specifies the number of milliseconds in which the
152  *    stop operation should complete.
153  *
154  * An indication of whether the device was successfully stopped. SCI_SUCCESS
155  * This value is returned if the transmission and reception for the device was
156  * successfully stopped.
157  */
158 enum sci_status sci_remote_device_stop(
159 	struct isci_remote_device *idev,
160 	u32 timeout);
161 
162 /**
163  * sci_remote_device_reset() - This method will reset the device making it
164  *    ready for operation. This method must be called anytime the device is
165  *    reset either through a SMP phy control or a port hard reset request.
166  * @remote_device: This parameter specifies the device to be reset.
167  *
168  * This method does not actually cause the device hardware to be reset. This
169  * method resets the software object so that it will be operational after a
170  * device hardware reset completes. An indication of whether the device reset
171  * was accepted. SCI_SUCCESS This value is returned if the device reset is
172  * started.
173  */
174 enum sci_status sci_remote_device_reset(
175 	struct isci_remote_device *idev);
176 
177 /**
178  * sci_remote_device_reset_complete() - This method informs the device object
179  *    that the reset operation is complete and the device can resume operation
180  *    again.
181  * @remote_device: This parameter specifies the device which is to be informed
182  *    of the reset complete operation.
183  *
184  * An indication that the device is resuming operation. SCI_SUCCESS the device
185  * is resuming operation.
186  */
187 enum sci_status sci_remote_device_reset_complete(
188 	struct isci_remote_device *idev);
189 
190 /**
191  * enum sci_remote_device_states - This enumeration depicts all the states
192  *    for the common remote device state machine.
193  * @SCI_DEV_INITIAL: Simply the initial state for the base remote device
194  * state machine.
195  *
196  * @SCI_DEV_STOPPED: This state indicates that the remote device has
197  * successfully been stopped.  In this state no new IO operations are
198  * permitted.  This state is entered from the INITIAL state.  This state
199  * is entered from the STOPPING state.
200  *
201  * @SCI_DEV_STARTING: This state indicates the the remote device is in
202  * the process of becoming ready (i.e. starting).  In this state no new
203  * IO operations are permitted.  This state is entered from the STOPPED
204  * state.
205  *
206  * @SCI_DEV_READY: This state indicates the remote device is now ready.
207  * Thus, the user is able to perform IO operations on the remote device.
208  * This state is entered from the STARTING state.
209  *
210  * @SCI_STP_DEV_IDLE: This is the idle substate for the stp remote
211  * device.  When there are no active IO for the device it is is in this
212  * state.
213  *
214  * @SCI_STP_DEV_CMD: This is the command state for for the STP remote
215  * device.  This state is entered when the device is processing a
216  * non-NCQ command.  The device object will fail any new start IO
217  * requests until this command is complete.
218  *
219  * @SCI_STP_DEV_NCQ: This is the NCQ state for the STP remote device.
220  * This state is entered when the device is processing an NCQ reuqest.
221  * It will remain in this state so long as there is one or more NCQ
222  * requests being processed.
223  *
224  * @SCI_STP_DEV_NCQ_ERROR: This is the NCQ error state for the STP
225  * remote device.  This state is entered when an SDB error FIS is
226  * received by the device object while in the NCQ state.  The device
227  * object will only accept a READ LOG command while in this state.
228  *
229  * @SCI_STP_DEV_ATAPI_ERROR: This is the ATAPI error state for the STP
230  * ATAPI remote device.  This state is entered when ATAPI device sends
231  * error status FIS without data while the device object is in CMD
232  * state.  A suspension event is expected in this state.  The device
233  * object will resume right away.
234  *
235  * @SCI_STP_DEV_AWAIT_RESET: This is the READY substate indicates the
236  * device is waiting for the RESET task coming to be recovered from
237  * certain hardware specific error.
238  *
239  * @SCI_SMP_DEV_IDLE: This is the ready operational substate for the
240  * remote device.  This is the normal operational state for a remote
241  * device.
242  *
243  * @SCI_SMP_DEV_CMD: This is the suspended state for the remote device.
244  * This is the state that the device is placed in when a RNC suspend is
245  * received by the SCU hardware.
246  *
247  * @SCI_DEV_STOPPING: This state indicates that the remote device is in
248  * the process of stopping.  In this state no new IO operations are
249  * permitted, but existing IO operations are allowed to complete.  This
250  * state is entered from the READY state.  This state is entered from
251  * the FAILED state.
252  *
253  * @SCI_DEV_FAILED: This state indicates that the remote device has
254  * failed.  In this state no new IO operations are permitted.  This
255  * state is entered from the INITIALIZING state.  This state is entered
256  * from the READY state.
257  *
258  * @SCI_DEV_RESETTING: This state indicates the device is being reset.
259  * In this state no new IO operations are permitted.  This state is
260  * entered from the READY state.
261  *
262  * @SCI_DEV_FINAL: Simply the final state for the base remote device
263  * state machine.
264  */
265 #define REMOTE_DEV_STATES {\
266 	C(DEV_INITIAL),\
267 	C(DEV_STOPPED),\
268 	C(DEV_STARTING),\
269 	C(DEV_READY),\
270 	C(STP_DEV_IDLE),\
271 	C(STP_DEV_CMD),\
272 	C(STP_DEV_NCQ),\
273 	C(STP_DEV_NCQ_ERROR),\
274 	C(STP_DEV_ATAPI_ERROR),\
275 	C(STP_DEV_AWAIT_RESET),\
276 	C(SMP_DEV_IDLE),\
277 	C(SMP_DEV_CMD),\
278 	C(DEV_STOPPING),\
279 	C(DEV_FAILED),\
280 	C(DEV_RESETTING),\
281 	C(DEV_FINAL),\
282 	}
283 #undef C
284 #define C(a) SCI_##a
285 enum sci_remote_device_states REMOTE_DEV_STATES;
286 #undef C
287 const char *dev_state_name(enum sci_remote_device_states state);
288 
289 static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc)
290 {
291 	struct isci_remote_device *idev;
292 
293 	idev = container_of(rnc, typeof(*idev), rnc);
294 
295 	return idev;
296 }
297 
298 static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev)
299 {
300 	/* XXX delete this voodoo when converting to the top-level device
301 	 * reference count
302 	 */
303 	if (WARN_ONCE(idev->started_request_count == 0,
304 		      "%s: tried to decrement started_request_count past 0!?",
305 			__func__))
306 		/* pass */;
307 	else
308 		idev->started_request_count--;
309 }
310 
311 void isci_dev_set_hang_detection_timeout(struct isci_remote_device *idev, u32 timeout);
312 
313 enum sci_status sci_remote_device_frame_handler(
314 	struct isci_remote_device *idev,
315 	u32 frame_index);
316 
317 enum sci_status sci_remote_device_event_handler(
318 	struct isci_remote_device *idev,
319 	u32 event_code);
320 
321 enum sci_status sci_remote_device_start_io(
322 	struct isci_host *ihost,
323 	struct isci_remote_device *idev,
324 	struct isci_request *ireq);
325 
326 enum sci_status sci_remote_device_start_task(
327 	struct isci_host *ihost,
328 	struct isci_remote_device *idev,
329 	struct isci_request *ireq);
330 
331 enum sci_status sci_remote_device_complete_io(
332 	struct isci_host *ihost,
333 	struct isci_remote_device *idev,
334 	struct isci_request *ireq);
335 
336 void sci_remote_device_post_request(
337 	struct isci_remote_device *idev,
338 	u32 request);
339 
340 enum sci_status sci_remote_device_terminate_requests(
341 	struct isci_remote_device *idev);
342 
343 int isci_remote_device_is_safe_to_abort(
344 	struct isci_remote_device *idev);
345 
346 enum sci_status
347 sci_remote_device_abort_requests_pending_abort(
348 	struct isci_remote_device *idev);
349 
350 enum sci_status isci_remote_device_suspend(
351 	struct isci_host *ihost,
352 	struct isci_remote_device *idev);
353 
354 enum sci_status sci_remote_device_resume(
355 	struct isci_remote_device *idev,
356 	scics_sds_remote_node_context_callback cb_fn,
357 	void *cb_p);
358 
359 enum sci_status isci_remote_device_resume_from_abort(
360 	struct isci_host *ihost,
361 	struct isci_remote_device *idev);
362 
363 enum sci_status isci_remote_device_reset(
364 	struct isci_host *ihost,
365 	struct isci_remote_device *idev);
366 
367 enum sci_status isci_remote_device_reset_complete(
368 	struct isci_host *ihost,
369 	struct isci_remote_device *idev);
370 
371 enum sci_status isci_remote_device_suspend_terminate(
372 	struct isci_host *ihost,
373 	struct isci_remote_device *idev,
374 	struct isci_request *ireq);
375 
376 enum sci_status isci_remote_device_terminate_requests(
377 	struct isci_host *ihost,
378 	struct isci_remote_device *idev,
379 	struct isci_request *ireq);
380 enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev,
381 					  enum sci_remote_node_suspension_reasons reason);
382 #endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */
383