1 /* 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * * Neither the name of Intel Corporation nor the names of its 40 * contributors may be used to endorse or promote products derived 41 * from this software without specific prior written permission. 42 * 43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 54 */ 55 #ifndef _ISCI_PROBE_ROMS_H_ 56 #define _ISCI_PROBE_ROMS_H_ 57 58 #ifdef __KERNEL__ 59 #include <linux/firmware.h> 60 #include <linux/pci.h> 61 #include <linux/efi.h> 62 #include "isci.h" 63 64 #define SCIC_SDS_PARM_NO_SPEED 0 65 66 /* generation 1 (i.e. 1.5 Gb/s) */ 67 #define SCIC_SDS_PARM_GEN1_SPEED 1 68 69 /* generation 2 (i.e. 3.0 Gb/s) */ 70 #define SCIC_SDS_PARM_GEN2_SPEED 2 71 72 /* generation 3 (i.e. 6.0 Gb/s) */ 73 #define SCIC_SDS_PARM_GEN3_SPEED 3 74 #define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED 75 76 /* parameters that can be set by module parameters */ 77 struct sci_user_parameters { 78 struct sci_phy_user_params { 79 /** 80 * This field specifies the NOTIFY (ENABLE SPIN UP) primitive 81 * insertion frequency for this phy index. 82 */ 83 u32 notify_enable_spin_up_insertion_frequency; 84 85 /** 86 * This method specifies the number of transmitted DWORDs within which 87 * to transmit a single ALIGN primitive. This value applies regardless 88 * of what type of device is attached or connection state. A value of 89 * 0 indicates that no ALIGN primitives will be inserted. 90 */ 91 u16 align_insertion_frequency; 92 93 /** 94 * This method specifies the number of transmitted DWORDs within which 95 * to transmit 2 ALIGN primitives. This applies for SAS connections 96 * only. A minimum value of 3 is required for this field. 97 */ 98 u16 in_connection_align_insertion_frequency; 99 100 /** 101 * This field indicates the maximum speed generation to be utilized 102 * by phys in the supplied port. 103 * - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s). 104 * - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s). 105 * - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s). 106 */ 107 u8 max_speed_generation; 108 109 } phys[SCI_MAX_PHYS]; 110 111 /** 112 * This field specifies the maximum number of direct attached devices 113 * that can have power supplied to them simultaneously. 114 */ 115 u8 max_number_concurrent_device_spin_up; 116 117 /** 118 * This field specifies the number of seconds to allow a phy to consume 119 * power before yielding to another phy. 120 * 121 */ 122 u8 phy_spin_up_delay_interval; 123 124 /** 125 * These timer values specifies how long a link will remain open with no 126 * activity in increments of a microsecond, it can be in increments of 127 * 100 microseconds if the upper most bit is set. 128 * 129 */ 130 u16 stp_inactivity_timeout; 131 u16 ssp_inactivity_timeout; 132 133 /** 134 * These timer values specifies how long a link will remain open in increments 135 * of 100 microseconds. 136 * 137 */ 138 u16 stp_max_occupancy_timeout; 139 u16 ssp_max_occupancy_timeout; 140 141 /** 142 * This timer value specifies how long a link will remain open with no 143 * outbound traffic in increments of a microsecond. 144 * 145 */ 146 u8 no_outbound_task_timeout; 147 148 }; 149 150 #define SCIC_SDS_PARM_PHY_MASK_MIN 0x0 151 #define SCIC_SDS_PARM_PHY_MASK_MAX 0xF 152 #define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4 153 154 struct sci_oem_params; 155 int sci_oem_parameters_validate(struct sci_oem_params *oem); 156 157 struct isci_orom; 158 struct isci_orom *isci_request_oprom(struct pci_dev *pdev); 159 enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem, 160 struct isci_orom *orom, int scu_index); 161 struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw); 162 struct isci_orom *isci_get_efi_var(struct pci_dev *pdev); 163 164 struct isci_oem_hdr { 165 u8 sig[4]; 166 u8 rev_major; 167 u8 rev_minor; 168 u16 len; 169 u8 checksum; 170 u8 reserved1; 171 u16 reserved2; 172 } __attribute__ ((packed)); 173 174 #else 175 #define SCI_MAX_PORTS 4 176 #define SCI_MAX_PHYS 4 177 #define SCI_MAX_CONTROLLERS 2 178 #endif 179 180 #define ISCI_FW_NAME "isci/isci_firmware.bin" 181 182 #define ROMSIGNATURE 0xaa55 183 184 #define ISCI_OEM_SIG "$OEM" 185 #define ISCI_OEM_SIG_SIZE 4 186 #define ISCI_ROM_SIG "ISCUOEMB" 187 #define ISCI_ROM_SIG_SIZE 8 188 189 #define ISCI_EFI_VENDOR_GUID \ 190 EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \ 191 0x1a, 0x04, 0xc6) 192 #define ISCI_EFI_VAR_NAME "RstScuO" 193 194 /* Allowed PORT configuration modes APC Automatic PORT configuration mode is 195 * defined by the OEM configuration parameters providing no PHY_MASK parameters 196 * for any PORT. i.e. There are no phys assigned to any of the ports at start. 197 * MPC Manual PORT configuration mode is defined by the OEM configuration 198 * parameters providing a PHY_MASK value for any PORT. It is assumed that any 199 * PORT with no PHY_MASK is an invalid port and not all PHYs must be assigned. 200 * A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs 201 * being assigned is sufficient to declare manual PORT configuration. 202 */ 203 enum sci_port_configuration_mode { 204 SCIC_PORT_MANUAL_CONFIGURATION_MODE = 0, 205 SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 1 206 }; 207 208 struct sci_bios_oem_param_block_hdr { 209 uint8_t signature[ISCI_ROM_SIG_SIZE]; 210 uint16_t total_block_length; 211 uint8_t hdr_length; 212 uint8_t version; 213 uint8_t preboot_source; 214 uint8_t num_elements; 215 uint16_t element_length; 216 uint8_t reserved[8]; 217 } __attribute__ ((packed)); 218 219 struct sci_oem_params { 220 struct { 221 uint8_t mode_type; 222 uint8_t max_concurrent_dev_spin_up; 223 uint8_t do_enable_ssc; 224 uint8_t reserved; 225 } controller; 226 227 struct { 228 uint8_t phy_mask; 229 } ports[SCI_MAX_PORTS]; 230 231 struct sci_phy_oem_params { 232 struct { 233 uint32_t high; 234 uint32_t low; 235 } sas_address; 236 237 uint32_t afe_tx_amp_control0; 238 uint32_t afe_tx_amp_control1; 239 uint32_t afe_tx_amp_control2; 240 uint32_t afe_tx_amp_control3; 241 } phys[SCI_MAX_PHYS]; 242 } __attribute__ ((packed)); 243 244 struct isci_orom { 245 struct sci_bios_oem_param_block_hdr hdr; 246 struct sci_oem_params ctrl[SCI_MAX_CONTROLLERS]; 247 } __attribute__ ((packed)); 248 249 #endif 250