1 /* 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * * Neither the name of Intel Corporation nor the names of its 40 * contributors may be used to endorse or promote products derived 41 * from this software without specific prior written permission. 42 * 43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 54 */ 55 56 #include "host.h" 57 58 #define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10) 59 #define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10) 60 #define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (1000) 61 62 enum SCIC_SDS_APC_ACTIVITY { 63 SCIC_SDS_APC_SKIP_PHY, 64 SCIC_SDS_APC_ADD_PHY, 65 SCIC_SDS_APC_START_TIMER, 66 67 SCIC_SDS_APC_ACTIVITY_MAX 68 }; 69 70 /* 71 * ****************************************************************************** 72 * General port configuration agent routines 73 * ****************************************************************************** */ 74 75 /** 76 * 77 * @address_one: A SAS Address to be compared. 78 * @address_two: A SAS Address to be compared. 79 * 80 * Compare the two SAS Address and if SAS Address One is greater than SAS 81 * Address Two then return > 0 else if SAS Address One is less than SAS Address 82 * Two return < 0 Otherwise they are the same return 0 A signed value of x > 0 83 * > y where x is returned for Address One > Address Two y is returned for 84 * Address One < Address Two 0 is returned ofr Address One = Address Two 85 */ 86 static s32 sci_sas_address_compare( 87 struct sci_sas_address address_one, 88 struct sci_sas_address address_two) 89 { 90 if (address_one.high > address_two.high) { 91 return 1; 92 } else if (address_one.high < address_two.high) { 93 return -1; 94 } else if (address_one.low > address_two.low) { 95 return 1; 96 } else if (address_one.low < address_two.low) { 97 return -1; 98 } 99 100 /* The two SAS Address must be identical */ 101 return 0; 102 } 103 104 /** 105 * 106 * @controller: The controller object used for the port search. 107 * @phy: The phy object to match. 108 * 109 * This routine will find a matching port for the phy. This means that the 110 * port and phy both have the same broadcast sas address and same received sas 111 * address. The port address or the NULL if there is no matching 112 * port. port address if the port can be found to match the phy. 113 * NULL if there is no matching port for the phy. 114 */ 115 static struct isci_port *sci_port_configuration_agent_find_port( 116 struct isci_host *ihost, 117 struct isci_phy *iphy) 118 { 119 u8 i; 120 struct sci_sas_address port_sas_address; 121 struct sci_sas_address port_attached_device_address; 122 struct sci_sas_address phy_sas_address; 123 struct sci_sas_address phy_attached_device_address; 124 125 /* 126 * Since this phy can be a member of a wide port check to see if one or 127 * more phys match the sent and received SAS address as this phy in which 128 * case it should participate in the same port. 129 */ 130 sci_phy_get_sas_address(iphy, &phy_sas_address); 131 sci_phy_get_attached_sas_address(iphy, &phy_attached_device_address); 132 133 for (i = 0; i < ihost->logical_port_entries; i++) { 134 struct isci_port *iport = &ihost->ports[i]; 135 136 sci_port_get_sas_address(iport, &port_sas_address); 137 sci_port_get_attached_sas_address(iport, &port_attached_device_address); 138 139 if (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0 && 140 sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0) 141 return iport; 142 } 143 144 return NULL; 145 } 146 147 /** 148 * 149 * @controller: This is the controller object that contains the port agent 150 * @port_agent: This is the port configruation agent for the controller. 151 * 152 * This routine will validate the port configuration is correct for the SCU 153 * hardware. The SCU hardware allows for port configurations as follows. LP0 154 * -> (PE0), (PE0, PE1), (PE0, PE1, PE2, PE3) LP1 -> (PE1) LP2 -> (PE2), (PE2, 155 * PE3) LP3 -> (PE3) enum sci_status SCI_SUCCESS the port configuration is valid for 156 * this port configuration agent. SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION 157 * the port configuration is not valid for this port configuration agent. 158 */ 159 static enum sci_status sci_port_configuration_agent_validate_ports( 160 struct isci_host *ihost, 161 struct sci_port_configuration_agent *port_agent) 162 { 163 struct sci_sas_address first_address; 164 struct sci_sas_address second_address; 165 166 /* 167 * Sanity check the max ranges for all the phys the max index 168 * is always equal to the port range index */ 169 if (port_agent->phy_valid_port_range[0].max_index != 0 || 170 port_agent->phy_valid_port_range[1].max_index != 1 || 171 port_agent->phy_valid_port_range[2].max_index != 2 || 172 port_agent->phy_valid_port_range[3].max_index != 3) 173 return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; 174 175 /* 176 * This is a request to configure a single x4 port or at least attempt 177 * to make all the phys into a single port */ 178 if (port_agent->phy_valid_port_range[0].min_index == 0 && 179 port_agent->phy_valid_port_range[1].min_index == 0 && 180 port_agent->phy_valid_port_range[2].min_index == 0 && 181 port_agent->phy_valid_port_range[3].min_index == 0) 182 return SCI_SUCCESS; 183 184 /* 185 * This is a degenerate case where phy 1 and phy 2 are assigned 186 * to the same port this is explicitly disallowed by the hardware 187 * unless they are part of the same x4 port and this condition was 188 * already checked above. */ 189 if (port_agent->phy_valid_port_range[2].min_index == 1) { 190 return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; 191 } 192 193 /* 194 * PE0 and PE3 can never have the same SAS Address unless they 195 * are part of the same x4 wide port and we have already checked 196 * for this condition. */ 197 sci_phy_get_sas_address(&ihost->phys[0], &first_address); 198 sci_phy_get_sas_address(&ihost->phys[3], &second_address); 199 200 if (sci_sas_address_compare(first_address, second_address) == 0) { 201 return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; 202 } 203 204 /* 205 * PE0 and PE1 are configured into a 2x1 ports make sure that the 206 * SAS Address for PE0 and PE2 are different since they can not be 207 * part of the same port. */ 208 if (port_agent->phy_valid_port_range[0].min_index == 0 && 209 port_agent->phy_valid_port_range[1].min_index == 1) { 210 sci_phy_get_sas_address(&ihost->phys[0], &first_address); 211 sci_phy_get_sas_address(&ihost->phys[2], &second_address); 212 213 if (sci_sas_address_compare(first_address, second_address) == 0) { 214 return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; 215 } 216 } 217 218 /* 219 * PE2 and PE3 are configured into a 2x1 ports make sure that the 220 * SAS Address for PE1 and PE3 are different since they can not be 221 * part of the same port. */ 222 if (port_agent->phy_valid_port_range[2].min_index == 2 && 223 port_agent->phy_valid_port_range[3].min_index == 3) { 224 sci_phy_get_sas_address(&ihost->phys[1], &first_address); 225 sci_phy_get_sas_address(&ihost->phys[3], &second_address); 226 227 if (sci_sas_address_compare(first_address, second_address) == 0) { 228 return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; 229 } 230 } 231 232 return SCI_SUCCESS; 233 } 234 235 /* 236 * ****************************************************************************** 237 * Manual port configuration agent routines 238 * ****************************************************************************** */ 239 240 /* verify all of the phys in the same port are using the same SAS address */ 241 static enum sci_status 242 sci_mpc_agent_validate_phy_configuration(struct isci_host *ihost, 243 struct sci_port_configuration_agent *port_agent) 244 { 245 u32 phy_mask; 246 u32 assigned_phy_mask; 247 struct sci_sas_address sas_address; 248 struct sci_sas_address phy_assigned_address; 249 u8 port_index; 250 u8 phy_index; 251 252 assigned_phy_mask = 0; 253 sas_address.high = 0; 254 sas_address.low = 0; 255 256 for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { 257 phy_mask = ihost->oem_parameters.ports[port_index].phy_mask; 258 259 if (!phy_mask) 260 continue; 261 /* 262 * Make sure that one or more of the phys were not already assinged to 263 * a different port. */ 264 if ((phy_mask & ~assigned_phy_mask) == 0) { 265 return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; 266 } 267 268 /* Find the starting phy index for this round through the loop */ 269 for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) { 270 if ((phy_mask & (1 << phy_index)) == 0) 271 continue; 272 sci_phy_get_sas_address(&ihost->phys[phy_index], 273 &sas_address); 274 275 /* 276 * The phy_index can be used as the starting point for the 277 * port range since the hardware starts all logical ports 278 * the same as the PE index. */ 279 port_agent->phy_valid_port_range[phy_index].min_index = port_index; 280 port_agent->phy_valid_port_range[phy_index].max_index = phy_index; 281 282 if (phy_index != port_index) { 283 return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; 284 } 285 286 break; 287 } 288 289 /* 290 * See how many additional phys are being added to this logical port. 291 * Note: We have not moved the current phy_index so we will actually 292 * compare the startting phy with itself. 293 * This is expected and required to add the phy to the port. */ 294 for (; phy_index < SCI_MAX_PHYS; phy_index++) { 295 if ((phy_mask & (1 << phy_index)) == 0) 296 continue; 297 sci_phy_get_sas_address(&ihost->phys[phy_index], 298 &phy_assigned_address); 299 300 if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) { 301 /* 302 * The phy mask specified that this phy is part of the same port 303 * as the starting phy and it is not so fail this configuration */ 304 return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; 305 } 306 307 port_agent->phy_valid_port_range[phy_index].min_index = port_index; 308 port_agent->phy_valid_port_range[phy_index].max_index = phy_index; 309 310 sci_port_add_phy(&ihost->ports[port_index], 311 &ihost->phys[phy_index]); 312 313 assigned_phy_mask |= (1 << phy_index); 314 } 315 316 } 317 318 return sci_port_configuration_agent_validate_ports(ihost, port_agent); 319 } 320 321 static void mpc_agent_timeout(struct timer_list *t) 322 { 323 u8 index; 324 struct sci_timer *tmr = from_timer(tmr, t, timer); 325 struct sci_port_configuration_agent *port_agent; 326 struct isci_host *ihost; 327 unsigned long flags; 328 u16 configure_phy_mask; 329 330 port_agent = container_of(tmr, typeof(*port_agent), timer); 331 ihost = container_of(port_agent, typeof(*ihost), port_agent); 332 333 spin_lock_irqsave(&ihost->scic_lock, flags); 334 335 if (tmr->cancel) 336 goto done; 337 338 port_agent->timer_pending = false; 339 340 /* Find the mask of phys that are reported read but as yet unconfigured into a port */ 341 configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; 342 343 for (index = 0; index < SCI_MAX_PHYS; index++) { 344 struct isci_phy *iphy = &ihost->phys[index]; 345 346 if (configure_phy_mask & (1 << index)) { 347 port_agent->link_up_handler(ihost, port_agent, 348 phy_get_non_dummy_port(iphy), 349 iphy); 350 } 351 } 352 353 done: 354 spin_unlock_irqrestore(&ihost->scic_lock, flags); 355 } 356 357 static void sci_mpc_agent_link_up(struct isci_host *ihost, 358 struct sci_port_configuration_agent *port_agent, 359 struct isci_port *iport, 360 struct isci_phy *iphy) 361 { 362 /* If the port is NULL then the phy was not assigned to a port. 363 * This is because the phy was not given the same SAS Address as 364 * the other PHYs in the port. 365 */ 366 if (!iport) 367 return; 368 369 port_agent->phy_ready_mask |= (1 << iphy->phy_index); 370 sci_port_link_up(iport, iphy); 371 if ((iport->active_phy_mask & (1 << iphy->phy_index))) 372 port_agent->phy_configured_mask |= (1 << iphy->phy_index); 373 } 374 375 /** 376 * 377 * @controller: This is the controller object that receives the link down 378 * notification. 379 * @port: This is the port object associated with the phy. If the is no 380 * associated port this is an NULL. The port is an invalid 381 * handle only if the phy was never port of this port. This happens when 382 * the phy is not broadcasting the same SAS address as the other phys in the 383 * assigned port. 384 * @phy: This is the phy object which has gone link down. 385 * 386 * This function handles the manual port configuration link down notifications. 387 * Since all ports and phys are associated at initialization time we just turn 388 * around and notifiy the port object of the link down event. If this PHY is 389 * not associated with a port there is no action taken. Is it possible to get a 390 * link down notification from a phy that has no assocoated port? 391 */ 392 static void sci_mpc_agent_link_down( 393 struct isci_host *ihost, 394 struct sci_port_configuration_agent *port_agent, 395 struct isci_port *iport, 396 struct isci_phy *iphy) 397 { 398 if (iport != NULL) { 399 /* 400 * If we can form a new port from the remainder of the phys 401 * then we want to start the timer to allow the SCI User to 402 * cleanup old devices and rediscover the port before 403 * rebuilding the port with the phys that remain in the ready 404 * state. 405 */ 406 port_agent->phy_ready_mask &= ~(1 << iphy->phy_index); 407 port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); 408 409 /* 410 * Check to see if there are more phys waiting to be 411 * configured into a port. If there are allow the SCI User 412 * to tear down this port, if necessary, and then reconstruct 413 * the port after the timeout. 414 */ 415 if ((port_agent->phy_configured_mask == 0x0000) && 416 (port_agent->phy_ready_mask != 0x0000) && 417 !port_agent->timer_pending) { 418 port_agent->timer_pending = true; 419 420 sci_mod_timer(&port_agent->timer, 421 SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); 422 } 423 424 sci_port_link_down(iport, iphy); 425 } 426 } 427 428 /* verify phys are assigned a valid SAS address for automatic port 429 * configuration mode. 430 */ 431 static enum sci_status 432 sci_apc_agent_validate_phy_configuration(struct isci_host *ihost, 433 struct sci_port_configuration_agent *port_agent) 434 { 435 u8 phy_index; 436 u8 port_index; 437 struct sci_sas_address sas_address; 438 struct sci_sas_address phy_assigned_address; 439 440 phy_index = 0; 441 442 while (phy_index < SCI_MAX_PHYS) { 443 port_index = phy_index; 444 445 /* Get the assigned SAS Address for the first PHY on the controller. */ 446 sci_phy_get_sas_address(&ihost->phys[phy_index], 447 &sas_address); 448 449 while (++phy_index < SCI_MAX_PHYS) { 450 sci_phy_get_sas_address(&ihost->phys[phy_index], 451 &phy_assigned_address); 452 453 /* Verify each of the SAS address are all the same for every PHY */ 454 if (sci_sas_address_compare(sas_address, phy_assigned_address) == 0) { 455 port_agent->phy_valid_port_range[phy_index].min_index = port_index; 456 port_agent->phy_valid_port_range[phy_index].max_index = phy_index; 457 } else { 458 port_agent->phy_valid_port_range[phy_index].min_index = phy_index; 459 port_agent->phy_valid_port_range[phy_index].max_index = phy_index; 460 break; 461 } 462 } 463 } 464 465 return sci_port_configuration_agent_validate_ports(ihost, port_agent); 466 } 467 468 /* 469 * This routine will restart the automatic port configuration timeout 470 * timer for the next time period. This could be caused by either a link 471 * down event or a link up event where we can not yet tell to which a phy 472 * belongs. 473 */ 474 static void sci_apc_agent_start_timer(struct sci_port_configuration_agent *port_agent, 475 u32 timeout) 476 { 477 port_agent->timer_pending = true; 478 sci_mod_timer(&port_agent->timer, timeout); 479 } 480 481 static void sci_apc_agent_configure_ports(struct isci_host *ihost, 482 struct sci_port_configuration_agent *port_agent, 483 struct isci_phy *iphy, 484 bool start_timer) 485 { 486 u8 port_index; 487 enum sci_status status; 488 struct isci_port *iport; 489 enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; 490 491 iport = sci_port_configuration_agent_find_port(ihost, iphy); 492 493 if (iport) { 494 if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) 495 apc_activity = SCIC_SDS_APC_ADD_PHY; 496 else 497 apc_activity = SCIC_SDS_APC_SKIP_PHY; 498 } else { 499 /* 500 * There is no matching Port for this PHY so lets search through the 501 * Ports and see if we can add the PHY to its own port or maybe start 502 * the timer and wait to see if a wider port can be made. 503 * 504 * Note the break when we reach the condition of the port id == phy id */ 505 for (port_index = port_agent->phy_valid_port_range[iphy->phy_index].min_index; 506 port_index <= port_agent->phy_valid_port_range[iphy->phy_index].max_index; 507 port_index++) { 508 509 iport = &ihost->ports[port_index]; 510 511 /* First we must make sure that this PHY can be added to this Port. */ 512 if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) { 513 /* 514 * Port contains a PHY with a greater PHY ID than the current 515 * PHY that has gone link up. This phy can not be part of any 516 * port so skip it and move on. */ 517 if (iport->active_phy_mask > (1 << iphy->phy_index)) { 518 apc_activity = SCIC_SDS_APC_SKIP_PHY; 519 break; 520 } 521 522 /* 523 * We have reached the end of our Port list and have not found 524 * any reason why we should not either add the PHY to the port 525 * or wait for more phys to become active. */ 526 if (iport->physical_port_index == iphy->phy_index) { 527 /* 528 * The Port either has no active PHYs. 529 * Consider that if the port had any active PHYs we would have 530 * or active PHYs with 531 * a lower PHY Id than this PHY. */ 532 if (apc_activity != SCIC_SDS_APC_START_TIMER) { 533 apc_activity = SCIC_SDS_APC_ADD_PHY; 534 } 535 536 break; 537 } 538 539 /* 540 * The current Port has no active PHYs and this PHY could be part 541 * of this Port. Since we dont know as yet setup to start the 542 * timer and see if there is a better configuration. */ 543 if (iport->active_phy_mask == 0) { 544 apc_activity = SCIC_SDS_APC_START_TIMER; 545 } 546 } else if (iport->active_phy_mask != 0) { 547 /* 548 * The Port has an active phy and the current Phy can not 549 * participate in this port so skip the PHY and see if 550 * there is a better configuration. */ 551 apc_activity = SCIC_SDS_APC_SKIP_PHY; 552 } 553 } 554 } 555 556 /* 557 * Check to see if the start timer operations should instead map to an 558 * add phy operation. This is caused because we have been waiting to 559 * add a phy to a port but could not becuase the automatic port 560 * configuration engine had a choice of possible ports for the phy. 561 * Since we have gone through a timeout we are going to restrict the 562 * choice to the smallest possible port. */ 563 if ( 564 (start_timer == false) 565 && (apc_activity == SCIC_SDS_APC_START_TIMER) 566 ) { 567 apc_activity = SCIC_SDS_APC_ADD_PHY; 568 } 569 570 switch (apc_activity) { 571 case SCIC_SDS_APC_ADD_PHY: 572 status = sci_port_add_phy(iport, iphy); 573 574 if (status == SCI_SUCCESS) { 575 port_agent->phy_configured_mask |= (1 << iphy->phy_index); 576 } 577 break; 578 579 case SCIC_SDS_APC_START_TIMER: 580 sci_apc_agent_start_timer(port_agent, 581 SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); 582 break; 583 584 case SCIC_SDS_APC_SKIP_PHY: 585 default: 586 /* do nothing the PHY can not be made part of a port at this time. */ 587 break; 588 } 589 } 590 591 /** 592 * sci_apc_agent_link_up - handle apc link up events 593 * @scic: This is the controller object that receives the link up 594 * notification. 595 * @sci_port: This is the port object associated with the phy. If the is no 596 * associated port this is an NULL. 597 * @sci_phy: This is the phy object which has gone link up. 598 * 599 * This method handles the automatic port configuration for link up 600 * notifications. Is it possible to get a link down notification from a phy 601 * that has no assocoated port? 602 */ 603 static void sci_apc_agent_link_up(struct isci_host *ihost, 604 struct sci_port_configuration_agent *port_agent, 605 struct isci_port *iport, 606 struct isci_phy *iphy) 607 { 608 u8 phy_index = iphy->phy_index; 609 610 if (!iport) { 611 /* the phy is not the part of this port */ 612 port_agent->phy_ready_mask |= 1 << phy_index; 613 sci_apc_agent_start_timer(port_agent, 614 SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); 615 } else { 616 /* the phy is already the part of the port */ 617 port_agent->phy_ready_mask |= 1 << phy_index; 618 sci_port_link_up(iport, iphy); 619 } 620 } 621 622 /** 623 * 624 * @controller: This is the controller object that receives the link down 625 * notification. 626 * @iport: This is the port object associated with the phy. If the is no 627 * associated port this is an NULL. 628 * @iphy: This is the phy object which has gone link down. 629 * 630 * This method handles the automatic port configuration link down 631 * notifications. not associated with a port there is no action taken. Is it 632 * possible to get a link down notification from a phy that has no assocoated 633 * port? 634 */ 635 static void sci_apc_agent_link_down( 636 struct isci_host *ihost, 637 struct sci_port_configuration_agent *port_agent, 638 struct isci_port *iport, 639 struct isci_phy *iphy) 640 { 641 port_agent->phy_ready_mask &= ~(1 << iphy->phy_index); 642 643 if (!iport) 644 return; 645 if (port_agent->phy_configured_mask & (1 << iphy->phy_index)) { 646 enum sci_status status; 647 648 status = sci_port_remove_phy(iport, iphy); 649 650 if (status == SCI_SUCCESS) 651 port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); 652 } 653 } 654 655 /* configure the phys into ports when the timer fires */ 656 static void apc_agent_timeout(struct timer_list *t) 657 { 658 u32 index; 659 struct sci_timer *tmr = from_timer(tmr, t, timer); 660 struct sci_port_configuration_agent *port_agent; 661 struct isci_host *ihost; 662 unsigned long flags; 663 u16 configure_phy_mask; 664 665 port_agent = container_of(tmr, typeof(*port_agent), timer); 666 ihost = container_of(port_agent, typeof(*ihost), port_agent); 667 668 spin_lock_irqsave(&ihost->scic_lock, flags); 669 670 if (tmr->cancel) 671 goto done; 672 673 port_agent->timer_pending = false; 674 675 configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; 676 677 if (!configure_phy_mask) 678 goto done; 679 680 for (index = 0; index < SCI_MAX_PHYS; index++) { 681 if ((configure_phy_mask & (1 << index)) == 0) 682 continue; 683 684 sci_apc_agent_configure_ports(ihost, port_agent, 685 &ihost->phys[index], false); 686 } 687 688 if (is_controller_start_complete(ihost)) 689 sci_controller_transition_to_ready(ihost, SCI_SUCCESS); 690 691 done: 692 spin_unlock_irqrestore(&ihost->scic_lock, flags); 693 } 694 695 /* 696 * ****************************************************************************** 697 * Public port configuration agent routines 698 * ****************************************************************************** */ 699 700 /** 701 * 702 * 703 * This method will construct the port configuration agent for operation. This 704 * call is universal for both manual port configuration and automatic port 705 * configuration modes. 706 */ 707 void sci_port_configuration_agent_construct( 708 struct sci_port_configuration_agent *port_agent) 709 { 710 u32 index; 711 712 port_agent->phy_configured_mask = 0x00; 713 port_agent->phy_ready_mask = 0x00; 714 715 port_agent->link_up_handler = NULL; 716 port_agent->link_down_handler = NULL; 717 718 port_agent->timer_pending = false; 719 720 for (index = 0; index < SCI_MAX_PORTS; index++) { 721 port_agent->phy_valid_port_range[index].min_index = 0; 722 port_agent->phy_valid_port_range[index].max_index = 0; 723 } 724 } 725 726 bool is_port_config_apc(struct isci_host *ihost) 727 { 728 return ihost->port_agent.link_up_handler == sci_apc_agent_link_up; 729 } 730 731 enum sci_status sci_port_configuration_agent_initialize( 732 struct isci_host *ihost, 733 struct sci_port_configuration_agent *port_agent) 734 { 735 enum sci_status status; 736 enum sci_port_configuration_mode mode; 737 738 mode = ihost->oem_parameters.controller.mode_type; 739 740 if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { 741 status = sci_mpc_agent_validate_phy_configuration( 742 ihost, port_agent); 743 744 port_agent->link_up_handler = sci_mpc_agent_link_up; 745 port_agent->link_down_handler = sci_mpc_agent_link_down; 746 747 sci_init_timer(&port_agent->timer, mpc_agent_timeout); 748 } else { 749 status = sci_apc_agent_validate_phy_configuration( 750 ihost, port_agent); 751 752 port_agent->link_up_handler = sci_apc_agent_link_up; 753 port_agent->link_down_handler = sci_apc_agent_link_down; 754 755 sci_init_timer(&port_agent->timer, apc_agent_timeout); 756 } 757 758 return status; 759 } 760